LAUNCHXL-CC1310: Failure to run LAUNCHXL-CC1310 cc26xx-web-demo MQTT publish to IBM Watson Iot Platform

YiKai Chen

Part Number: LAUNCHXL-CC1310

I try to to run cc26xx-web-demo MQTT (on LAUNCHXL-CC1310 connecting to 6lbr) publish to IBM Watson Iot Platform. I create the following device on IBM Watson Iot Platform.

I get Device Type : cc26xx-ibm-iot, Organization ID : uc6bmi and Authentication Token (I don't show here). I fill those information into cc26xx-web-demo MQTT/IBM cloud config page.

After submit and MQTT reconnect, it always shows not authorized on IBM Watson Iot Platform.

I have a feeling that I might use wrong Type ID in cc26xx-web-demo MQTT/IBM cloud config page. Since I don's see Type ID on IBM Watson Iot Platform when I create device and I only see Device Type, I use my Device Type: cc26xx-ibm-iot to fill Type ID in cc26xx-web-demo MQTT/IBM cloud config page. Is this the reason why I get not authorized feedback? If so, how can I get correct Type ID?

over 6 years ago

0 Severin Suveren over 6 years ago

TI__Mastermind 23730 points

Have you tried using the Device ID from the IBM Watson IoT Platform as the Type ID in the MQTT/IBM cloud config page?

0 YiKai Chen over 6 years ago in reply to Severin Suveren

Guru 735455 points

Yes, I had tried it but still get not authorized error. Any other suggestion?

0 Severin Suveren over 6 years ago in reply to YiKai Chen

TI__Mastermind 23730 points

I'm not familiar with the IBM Watson IoT platform, so I'm as clueless as you. Have this worked before with any other Contiki/6lbr versions?

0 YiKai Chen over 6 years ago in reply to Severin Suveren

Guru 735455 points

No, I never make it work. I think Firefighter might know this.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

What did you change to make "unauthorized operation" go out?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I already listed my steps in original post.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

I did the same but I do not come out no logs

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I don't know why you don't see that logs.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

The your device is disconnected or connected?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Of course, it is disconnected. Why would I raise an issue here if it is connected?

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Strange that it does not work

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I am sure there is something wrong so I need TI experts to help.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

But you the config it is change on web config or in the code?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

On web. I already described it on my original post.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Hi Yikai, Where is the your configuration of 6LBR?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I don't know what you are asking.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

I wanted to know, what is your configuration of 6LBR. It's possibly?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I only add my desktop IPv6 address to peer::router and no other settings is changed.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Do you resolve the problem with IBM cloud? I testing but when I insert in the web config the configuration of my ord id, on tcpdump not captured anything packets.

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I post this issue because I haven’t find solution.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

I see this

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

So? What do you mean to say?

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Is my log message different from your true? Maybe it takes the token auth?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I couldn’t understand your question.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

If you see my log messages, are they different from your messages? Does it take the auth-token?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I cannot tell from your screenshot.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Were you able to enter the token?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I hard code it into code in my latest test.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

How?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Just write OrgID and Auth token in to source code conn parameters.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

And function?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

init_config

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

It works?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I had told your I post this issue because it doesn't work. How many time do you want to ask the same question?

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

I saw that you had made changes and I only asked if it works. Why Fidget? We're helping each other. I think there's a need for TLS protocol, don't you think?

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

I add in cc26xx-web-demo.h -- CC26XX_WEB_DEMO_DEFAULT_AUTH_TOKEN and in mqtt-client. c in init_config() --memcpy(conf->auth_token_id, CC26XX_WEB_DEMO_DEFAULT_AUTH_TOKEN, 8);

It's ok? Did I miss something?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Severin Suveren Do you have any finding?

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Men, did you know what is the user_id on ibm cloud?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Firefighter any comment?

0 YiKai Chen over 6 years ago in reply to YiKai Chen

Guru 735455 points

After I suf some IBM documents, I read this one console.bluemix.net/.../connect_devices_apps_gw.html and figure that IBM Watson IoT service uses TLS as default. After I set it to TLS optional, it works flawlessly.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Hi Yikai, so can you publish the data on the IBM cloud?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Yes

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

What have you changed? Can you help me?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I have described you can change security to TLS Optional.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

GoodMorning Yikai.

I'm trying to connect my device to the cloud. I made these changes: 1) modified ORG_ID and TYPE_ID in Cc26xx-Web-Demo. h
2) Modified IP broker, #define QuickStart in #define NAY1TD and modified the State_machine () QuickStart to NAY1TD.

Now when I try to put in the cloud security menu and optional TLS I get this:

Do you have suggestions?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I don't know what you are doing. I don't need to revise and source code to make this work.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Didn't you change the source code? Does the IP broker stay the Quickstart?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

I don't change source code and I use IPv6 of org_id.messaging.internetofthings.ibmcloud.com as broker IP.

0 Mark Felberg over 6 years ago in reply to YiKai Chen

Guru 19990 points

Make your changes on the page "mqtt-cloud config "?

0 YiKai Chen over 6 years ago in reply to Mark Felberg

Guru 735455 points

Yes

Sub-1 GHz

Sub-1 GHz forum

LAUNCHXL-CC1310: Failure to run LAUNCHXL-CC1310 cc26xx-web-demo MQTT publish to IBM Watson Iot Platform