• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 55 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1310: SmartPacket Sniffer 2 and how to let it work?

roland van straten
Intellectual 295 points
Part Number: CC1310

Dear all,

I have installed Wireshark 2.6.2 in the default directories installed.

I tried to install SmartRF Packet Sniffer 2 Setup, but it fails and complaining it cannot find Wireshark.

Already rebooted, tried Wireshark, but Ti Sniffer keeps complaining.

So what's next....

Regards,

Roland

  • 0
    Intellectual 295 points

    I did the RTFM and was able to configure it so it works even though the installer gave a warning about wireshark.

    It works beautifully now and was able to use a CC1310 LAUNCHPAD as sniffer to see that the packets are coming in.

    Now I know the bits are flying through the air... in the intended format.

  • 0 in reply to roland van straten
    TI__Prodigy 85 points
    Hi Roland,

    I'm glad you were able to get this working.

    One thing to note is that the current version of Smart RF Packet Sniffer 2 requires Wireshark 2.4 (Old Stable Release). This may be the cause to your original issue.

    Best regards,
    CJW