I need the CC3000 to be able to receive both subnet-specific broadcast messages (e.g. 192.168.1.255) and general broadcast messages (255.255.255.255).
How do I have to configure the CC3000 sockets to be able to do that?
CC3000 receives UDP broadcasts(to 192.168.1.255) sent to a particular port. General use-case is where you would need to make CC3000 listen on a particular port (UDP server). A client which broadcasts a message on that port to 192.168.1.255 will send message to all the devices listening to that port in that network(including CC3000).
Regarding, 255.255.255.255, are you referring to this specific broadcast address or are you referring to the multicast address group?
Thanks & Regards,Raghavendra
In reply to Raghavendra Shenoy:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.