border-router

Antonio Racchio

Other Parts Discussed in Thread: CC1310

Hi, I'm using slip-radio and cc26xx-web-demo for my work. Now I would like to prove a new solution such as: border router. How function? Is there something guide? Thanks

over 6 years ago

0 YiKai Chen over 6 years ago

Guru 735455 points

You can refer to sunmaysky.blogspot.tw/.../setup-6lbr-to-run-6lowpan-with-cc2531.html and processors.wiki.ti.com/.../Cc26xx_sw_examples

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I know this, I want work with border-router

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Can you elaborate what you mean work with border-router?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

rpl-border-router instead of slip-radio

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Do you mean to run 6lbr on CC26xx directly?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

sunmaysky.blogspot.it/.../rpl-border-router . I test it but not fuction

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

What do you mean not function?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

When I Connect my cc1310 on Instant Contiki and I go the tunslip it is not connect

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

I suggest you setup sensniff to check what happens over the air.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I following your step and arrive here. Now, when i put the ipv6 address on browser, i have a error: Connection refused. Why?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Hi Yikai, Do you see my photo?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Yes. But, I don’t have time to verify this with latest Contiki code. By the way, what HW do you use? CC13XX or CC26xx?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

CC13XX

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Try to use the same Contiki version in the blog to see if it works.

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

I git the latest Contiki OS and redo the test. I see there is something wrong in rpl-broder-router with tunslip6. I have posted an new issue ( github.com/.../2409 ) on Contiki Github and hop some experts over there can help.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I work with Rasp+Border. When I start the tunslip, on browser of rasp function but i don't see the sensor cc26xx-web-demo,instead, on mozilla of my pc i don't see the page

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

If it cannot work on InstantContiki, I don't think it can work on raspberry Pi. Since you are using Raspberry Pi, why do you want to run tunslip on it? I suppose you can run 6lbr to communicate with cc26xx-web-demo.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I tested with raspberry and it works. Read the sensor, but when I open a new page for the coap do not function

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Try to use nullRDC to build cc26xx-web-demo and test again.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

But Can I open the "web" page instead of coap on browser rasp? When i digit [aaaa::212:4b00:efd:b272] i see connection refused

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

The latest Contiki OS already use fd00 instead of aaaa as prefix. Why do you still use aaaa::...?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I see on your blog: sunmaysky.blogspot.it/.../rpl-border-router

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

It’s obsolete. As I replied,Contiki OS already changes it to fd00::...

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Same error, i don't see the page

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Do you set nullRDC on your cc26xx-web-demo?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Yes

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Can you access to 6lbr web page bbbb::100?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I told you that I not usign bbbb::100 but the border router

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

If you use rpl-border-router, I have told you it doesn’t work using latest Contiki source code.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

But with contiki 2.7, the border router is function?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

If I remember correctly, Contiki 2.7 doesn’t support CC13XX.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

How Can i use border border with cc13xx?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Maybe sync back to the Contiki code on November 2015.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Can you give me to download for this version of contiki os?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

I don’t remember exact version I use in the blog. Only remember rough date when I test it.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

I've seen Contiki releases, there's a November 2013 and August 2015 release

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Nothing I can help for now.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Ok, thanks for your support. Last question, Can I add the udp-client and udp-server code with cc26xx-web-demo?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

It should be no problem.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Ok, but I insert in the code cc26xx-web-demo.c or in the repository cc26xx-web-demo how new code?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

I suggest you to put UDP server and client to cc26xx-web-demo folder. Then, refer to how net-uart.c and net-uart.h are included and used in cc26xx-web-demo to implement accordingly.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Thanks Yikai

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Hi Yikai, I put the udp-server.c on the cc26xx-web-demo folder. When i generate the file, i connect the device to usb of my pc and open Hercules. The problem is that i don't see the start of udp_server_process

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Do you use process_start to start UDP server process in CC26xx-web-demo?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Hi Ykai, i solved my problem. In the project-conf.h i don't ability the process. But I have another problem. I insert the udp-client and udp-server in the folder cc26xx-web-demo, but I not communicate with another cc26xx-web-demo. Do you understand?

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

No, I don’t understand.

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

DEVICE 1 CC26XX-WEB-DEMO WITH UDP-CLIENT AND SERVER FOR RECEIVE AND SEND TO DEVICE 2
DEVICE 2 CC26XX-WEB-DEMO WITH UDP-CLIENT AND SERVER FOR RECEIVE AND SEND TO DEVICE 1

But not communicate

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

Do you see UDP server and client information output on UART?

0 Antonio Racchio over 6 years ago in reply to YiKai Chen

Expert 2280 points

Yes, but not communicate between device. If i write command "on" on device 1 the is on on device 1 not device 2

0 YiKai Chen over 6 years ago in reply to Antonio Racchio

Guru 735455 points

I suggest you to setup sensniff to check what happens over the air.

Zigbee & Thread

Zigbee & Thread forum

border-router