CC2650: Reference design for NFC enabled znp , ZR and zed

Dhanraj

Guru 14805 points

Part Number: CC2650
Other Parts Discussed in Thread: Z-STACK

Hello,

1) Is there any Reference design available for NFC enabled znp , ZR and zed.

2) Also what are the changes required for NFC enabled zigbee devices?

3) Is there any documentation available?

over 5 years ago

0 YiKai Chen over 5 years ago

Guru 735455 points

As I know, there’s no such related document or information. By the way, what do you mean NFC enabled zigbee devices?

0 Dhanraj over 5 years ago in reply to YiKai Chen

Guru 14805 points

NFC enabled zigbee devices means, zigbee devices will do pairing through NFC.
as demonstrated by you here sunmaysky.blogspot.in/.../secure-zigbee-pairing-using-nfc.html

0 YiKai Chen over 5 years ago in reply to Dhanraj

Guru 735455 points

That’s our own design and TI doesn’t have similar reference design.

0 Dhanraj over 5 years ago in reply to YiKai Chen

Guru 14805 points

I can understand that is your own solution.

But how can we achieve that functionality ?
1) do we need full source code of TI-Zstack to implement this functionality or whatever available is enough?
2) is it possible with z-stack 1.2.2a as well as z-stack 3.0 or only with z-stack 3.0 ?
3) Also how will be the joining procedure ??

0 YiKai Chen over 5 years ago in reply to Dhanraj

Guru 735455 points

1. All the implementations are on application layer.
2. Both Z-Stack Home 1.2.2a and 3.0 can do this.
3. We clone the necessary network information from ZC to device via NFC.

0 Dhanraj over 5 years ago in reply to YiKai Chen

Guru 14805 points

Can you please elaborate your point 3) i.e.We clone the necessary network information from ZC to device via NFC.

Zigbee & Thread

Zigbee & Thread forum

CC2650: Reference design for NFC enabled znp , ZR and zed