When you can create automotive applications that do more with fewer parts, you’ll reduce both weight and cost and improve reliability. That’s the idea behind integrating electric vehicle (EV) and hybrid electric vehicle (HEV) designs with a combo-box architecture.
What’s a combo-box architecture?
A combo-box architecture integrates powertrain end equipment such as the onboard charger (OBC), high-voltage DC/DC (HV DCDC), inverter and power distribution unit (PDU). It’s possible to apply integration at the mechanical, control or powertrain levels, as shown in Figure 1.
Figure 1: An overview of the typical architecture in an EV
Why is a combo-box architecture great for HEV/EVs?
Integrating powertrain end-equipment components enables you to achieve:
A High-Performance, Combo Box Powertrain Solution: The Key to EV Adoption
Current combo-box applications on the market
There are many different ways to implement a combo-box architecture, but Figure 2 outlines four of the most common approaches (using an onboard charger and a high-voltage DC/DC combo box as the example) to achieve high power density when combining the powertrain, control circuit and mechanics. The options are:
Figure 2: Four of the most common options for a OBC and DC/DC combo-box architecture
Table 1 outlines combo-box architectures on the market today.
High-voltage three-in-one integration of OBC, high-voltage DC/DC and PDU optimizing electromagnetic interference (EMI) (option No. 3)
Combo-box architecture integrating an onboard charger plus a high-voltage DC/DC converter (option No. 4)
43-kW charger design integrating an onboard charger plus a traction inverter plus a traction motor (option No. 4)
*Third party data reports that designs such as this can achieve approximately a 40% weight and volume reduction and a 40% boost in power density
(one microcontroller [MCU] control power factor correction stage, one MCU control DC/DC stage and one high-voltage DC/DC)
Table 1: Three successful implementations of a combo-box architecture
Combo-box block diagrams for powertrain
Figure 3 depicts a powertrain block diagram implementing a combo-box architecture with power-switch sharing and magnetic integration.
Figure 3: Power switch and magnetic sharing in a combo-box architecture
As shown in Figure 3, both the OBC and high-voltage DC/DC converter are connected to the high-voltage battery, so the rated voltage of the full bridge is the same for the onboard charger and the high-voltage DC/DC. This enables power-switch sharing with the full bridge for both the onboard charger and the high-voltage DC/DC.
Additionally, integrating the two transformers shown in Figure 3 achieves magnetic integration. This is possible because they have the same rated voltage at the high-voltage side, which can eventually become a three-terminal transformer.
Figure 4 shows how to build in a buck converter to help improve the performance of the low-voltage output.
Figure 4: Improving the performance of the low-voltage output
When this combo topology is working in the high-voltage battery-charging condition, the high-voltage output will be controlled accurately. However, the performance of the low-voltage output will be limited, since the two terminals of the transformer are coupled together. A simple method to improve the low-voltage output performance is to add a built-in step-down converter. The trade-off, however, is the additional cost.
Like the OBC and high-voltage DC/DC integration, the voltage rating of the power factor correction stage in the onboard charger and the three half bridges is very close. This allows power-switch sharing with the three half bridges shared by the two end-equipment components, as shown in Figure 5, which can reduce cost and improve power density.
Figure 5: Sharing components in a combo-box design
Since there are normally three windings in a motor, it is also possible to achieve magnetic integration by sharing the windings as the power factor corrector inductors in the OBC which also lends to the cost reduction and power-density improvement of this design.
The integration evolution continues, from low-level mechanical integration to high-level electronic integration. System complexity will increase as the integration level increases. However, each combo-box architecture variant presents different design challenges, including:
Flexibility is key with a combo-box architecture. With so many options, you can explore this design at any level.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.