U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for ethernet@48484000: addr 2 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 ## Error: "board_findfdt" not defined i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 185 bytes read in 2 ms (89.8 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 3577032 bytes read in 174 ms (19.6 MiB/s) 107792 bytes read in 28 ms (3.7 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3694c8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff50f ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00041-g84382ab (x0284921@bangvideoapps02) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Aug 5 14:52:40 IST 2019 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 Cascade Radar Board [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f2f1e000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025330 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=3cc717e1-02 rw rootwait ip=none cma=64M vmalloc=128M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2439424K/4109312K available (6671K kernel code, 320K rwdata, 2396K rodata, 336K init, 290K bss, 1424128K reserved, 245760K cma-reserved, 2167808K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf8000000 - 0xff800000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7800000 ( 888 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08e302c (9069 kB) [ 0.000000] .init : 0xc08e4000 - 0xc0938000 ( 336 kB) [ 0.000000] .data : 0xc0938000 - 0xc0988220 ( 321 kB) [ 0.000000] .bss : 0xc098a000 - 0xc09d2880 ( 291 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000339] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000346] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000803] Console: colour dummy device 80x30 [ 0.000820] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000826] This ensures that you still see kernel messages. Please [ 0.000832] update your kernel commandline. [ 0.000844] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000857] pid_max: default: 32768 minimum: 301 [ 0.000956] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000966] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001516] Initializing cgroup subsys io [ 0.001533] Initializing cgroup subsys memory [ 0.001557] Initializing cgroup subsys devices [ 0.001570] Initializing cgroup subsys freezer [ 0.001581] Initializing cgroup subsys perf_event [ 0.001593] Initializing cgroup subsys pids [ 0.001621] CPU: Testing write buffer coherency: ok [ 0.001816] /cpus/cpu@0 missing clock-frequency property [ 0.001833] /cpus/cpu@1 missing clock-frequency property [ 0.001843] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001879] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080057] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080127] Brought up 2 CPUs [ 0.080140] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080146] CPU: All CPU(s) started in HYP mode. [ 0.080151] CPU: Virtualization extensions available. [ 0.080529] devtmpfs: initialized [ 0.109484] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110469] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.314224] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.314245] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.319292] pinctrl core: initialized pinctrl subsystem [ 0.320193] NET: Registered protocol family 16 [ 0.321127] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350241] cpuidle: using governor ladder [ 0.380270] cpuidle: using governor menu [ 0.388779] OMAP GPIO hardware version 0.1 [ 0.392731] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.408124] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.408137] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.417227] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.417237] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.417705] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.417714] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.418285] OMAP DMA hardware revision 0.0 [ 0.461492] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462633] edma 43300000.edma: memcpy is disabled [ 0.467356] edma 43300000.edma: TI EDMA DMA engine driver [ 0.471411] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.471596] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.471754] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.471915] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.472191] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.472392] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.475421] palmas 0-0058: IRQ missing: skipping irq request [ 0.490865] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.552772] pcf857x: probe of 0-0020 failed with error -121 [ 0.553023] pcf857x: probe of 0-0021 failed with error -121 [ 0.553878] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554292] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554489] media: Linux media interface: v0.10 [ 0.554541] Linux video capture interface: v2.00 [ 0.554583] pps_core: LinuxPPS API ver. 1 registered [ 0.554590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554619] PTP clock support registered [ 0.554669] EDAC MC: Ver: 3.0.0 [ 0.555422] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555714] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.556042] Advanced Linux Sound Architecture Driver Initialized. [ 0.556905] clocksource: Switched to clocksource arch_sys_counter [ 0.567523] NET: Registered protocol family 2 [ 0.568021] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.568084] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568208] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568255] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568286] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568427] NET: Registered protocol family 1 [ 0.568712] RPC: Registered named UNIX socket transport module. [ 0.568721] RPC: Registered udp transport module. [ 0.568728] RPC: Registered tcp transport module. [ 0.568734] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569707] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579691] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580331] NFS: Registering the id_resolver key type [ 0.580360] Key type id_resolver registered [ 0.580367] Key type id_legacy registered [ 0.580426] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581700] bounce: pool size: 64 pages [ 0.581858] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.581874] io scheduler noop registered [ 0.581886] io scheduler deadline registered [ 0.581920] io scheduler cfq registered (default) [ 0.587408] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590927] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590940] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590972] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590993] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.591202] dra7-pcie 51000000.pcie_rc: CFG 'Bus Master Enable' change [ 0.591212] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617706] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.617719] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.617729] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.617739] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.617800] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617816] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617841] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617855] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617877] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617891] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.618191] PCI: bus0: Fast back to back transfers disabled [ 0.636995] PCI: bus1: Fast back to back transfers disabled [ 0.637123] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.637138] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [ 0.637149] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.637164] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x20203fff 64bit] [ 0.637212] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.637224] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.637439] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.637449] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.698963] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.702350] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 202, base_baud = 3000000) is a 8250 [ 1.802310] console [ttyS0] enabled [ 1.806704] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 203, base_baud = 3000000) is a 8250 [ 1.816409] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 204, base_baud = 3000000) is a 8250 [ 1.826431] [drm] Initialized drm 1.1.0 20060810 [ 1.831989] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.838674] [drm] No driver support for vblank timestamp query. [ 1.844800] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [ 1.851952] OMAP DSS rev 6.1 [ 1.855705] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.871341] loop: module loaded [ 1.874875] vmemexp device MAJOR num = 245 [ 1.879028] vmemexp class registered [ 1.882742] /dev/vmemexp device registered [ 1.886856] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.892404] nvme 0000:01:00.0: enabling device (0140 -> 0142) [ 1.898828] nand: No NAND device found [ 1.902599] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.911700] m25p80 spi32766.0: found n25q00, expected s25fl256s1 [ 1.917823] m25p80 spi32766.0: n25q00 (131072 Kbytes) [ 1.922952] 7 ofpart partitions found on MTD device spi32766.0 [ 1.928832] Creating 7 MTD partitions on "spi32766.0": [ 1.933997] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.940125] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.956439] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.973412] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.990100] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 2.007514] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 2.019690] nvme0n1: p1 [ 2.023879] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 2.041750] libphy: Fixed MDIO Bus: probed [ 2.096939] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.103064] libphy: 48485000.mdio: probed [ 2.120437] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867 [ 2.129387] cpsw 48484000.ethernet: Detected MACID = 78:db:2f:4d:21:9a [ 2.136038] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 2.143012] cpsw 48484000.ethernet: cpsw: Detected MACID = 78:db:2f:4d:21:9b [ 2.151647] mousedev: PS/2 mouse device common for all mice [ 2.167853] i2c /dev entries driver [ 2.176609] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.227486] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.233873] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.247053] evm_3v3_sw: supplied by sysen1 [ 2.307756] ledtrig-cpu: registered to indicate activity on CPUs [ 2.317834] aic_dvdd: supplied by evm_3v3_sw [ 2.323087] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.330604] NET: Registered protocol family 10 [ 2.345918] sit: IPv6 over IPv4 tunneling driver [ 2.351125] NET: Registered protocol family 17 [ 2.355807] Key type dns_resolver registered [ 2.360256] omap_voltage_late_init: Voltage driver support not added [ 2.367162] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.373372] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.380082] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.386292] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.393626] Power Management for TI OMAP4+ devices. [ 2.398756] Registering SWP/SWPB emulation handler [ 2.404895] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.412440] dmm 4e000000.dmm: initialized all PAT entries [ 2.418865] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 2.436695] hctosys: unable to open rtc device (rtc0) [ 2.453758] evm_1v8: disabling [ 2.456833] aic_dvdd: disabling [ 2.460212] ldousb: disabling [ 2.463682] ALSA device list: [ 2.466664] No soundcards found. [ 2.470967] Waiting for root device PARTUUID=3cc717e1-02... [ 2.476393] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.479837] mmc0: new high speed SDHC card at address aaaa [ 2.490316] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 2.496089] mmcblk0: p1 p2 [ 2.597582] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.606203] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 4.203094] EXT4-fs (mmcblk0p2): recovery complete [ 4.209204] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.217382] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 4.223481] devtmpfs: mounted [ 4.226671] Freeing unused kernel memory: 336K [ 4.231152] This architecture does not have kernel memory protection. [ 4.418765] systemd[1]: System time before build time, advancing clock. [ 4.459857] random: systemd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 4.473158] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 4.484845] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 4.503355] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 4.528085] systemd[1]: Set hostname to . [ 4.534072] random: systemd: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 4.543407] systemd[1]: Initializing machine ID from random generator. [ 4.617957] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 4.633815] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 4.644066] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 4.655224] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 20 bits of entropy available) [ 4.676247] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 21 bits of entropy available) [ 4.737818] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 4.747350] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available) [ 5.030855] systemd[1]: Configuration file /etc/systemd/system/multi-user.target.wants/vsdk.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 5.048116] systemd[1]: [/etc/systemd/system/multi-user.target.wants/vsdk.service:3] Failed to add dependency on rc.pvr, ignoring: Invalid argument [ 5.147668] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 5.155457] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 5.163203] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 5.171394] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 5.178889] systemd[1]: sysinit.target: Found dependency on dbus.socket/start [ 5.186064] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 5.193521] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 5.202983] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 5.240841] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 5.267927] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.297297] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.327185] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.347130] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.392276] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.447390] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 5.479864] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.509693] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.540112] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 5.569594] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 5.597366] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.627287] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 5.687338] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.701091] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.727215] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.747351] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 5.777352] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 5.807428] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 5.837140] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.888113] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 5.907170] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.927333] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.957940] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 6.017384] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 6.041412] systemd[1]: Mounted Debug File System. [ 6.043008] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Mounted Debug File System. [ 6.067353] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 6.097196] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 6.129068] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ 6.869961] systemd-journald[104]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 7.383334] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 Starting Load/Save Random Seed... [ 7.415675] remoteproc0: 55020000.ipu is available [ 7.448124] remoteproc0: Note: remoteproc is still under development and considered experimental. [ OK ] Started Create Volatile Files and Directories.[ 7.479169] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.507428] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 7.522516] remoteproc1: 40800000.dsp is available [ OK ] Started udev Coldplug all Devices. [ 7.544730] remoteproc1: Note: remoteproc is still under development and considered experimental. [ OK ] Started Load/Save Random Seed.[ 7.591725] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.668077] remoteproc1: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 7.685996] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 7.702411] remoteproc1: failed to load dra7-dsp1-fw.xe66 [ 7.726963] remoteproc2: 41000000.dsp is available [ 7.766964] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 7.790948] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 7.806574] remoteproc0: registered virtio0 (type 7) [ OK ] Found device /dev/ttyS0.[ 7.818245] remoteproc2: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 [ 7.857023] remoteproc2: failed to load dra7-dsp2-fw.xe66 [ 7.863850] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 7.924731] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 7.971820] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ 8.218781] SCSI subsystem initialized [ OK ] Started Network Time Synchronization. [ 8.409776] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 8.438160] CAN device driver interface [ 8.457321] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 8.469198] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Update UTMP about System Boot/Shutdown. [ 8.577369] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=254) [ 8.593421] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 8.607829] ahci 4a140000.sata: Enable 32-bit DMA instead of 64-bit. [ 8.654808] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Reached target System Time Synchronized. Starting Synchronize System and HW clocks...[ 8.720605] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Started Synchronize System and HW clocks. [ 8.847069] scsi host0: ahci [ 8.850324] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 240 [ 8.914395] [drm] Initialized pvr 1.14.3699939 20110701 on minor 2 [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers.[ 9.079693] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Listening on dropbear.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ 9.223307] EXT4-fs (nvme0n1p1): recovery complete [ 9.240133] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 9.246987] ata1: SATA link down (SStatus 0 SControl 300) [ OK ] Started Launching Vision SDK App. [ OK ] Started Kernel Logging Service. [ OK ] Started System Logging Service. Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting rc.pvr.service... Starting Network Service... Starting Permit User Sessions... [ 9.722598] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started Permit User Sessions. [ 9.829882] net eth0: initializing cpsw version 1.15 (0) [ 9.857839] net eth0: initialized cpsw ale version 1.4 [ 9.870187] net eth0: ALE Table size 1024 [ 9.919364] net eth0: phy found : id is : 0x2000a231 [ OK ] Started rc.pvr.service. [ 9.952123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.007730] remoteproc0: powering up 55020000.ipu [ 10.023564] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 4396172 [ 10.052579] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 10.119410] remoteproc0: remote processor 55020000.ipu is now up [ OK ] Started Network Service. [ 10.128015] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.170236] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 10.197992] NET: Registered protocol family 41 [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Network Service... Starting weston.service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Network Service. [ OK ] Started weston.service. [ OK ] Started Login Service. Starting Network Service... Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started Network Service. [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting Network Service... [ OK ] Started Network Service. Starting Network Service... [ OK ] Started Network Service. [FAILED] Failed to listen on Network Service Bus Name. See 'systemctl status org.freedesktop.network1.busname' for details. [FAILED] Failed to start Network Service. See 'systemctl status systemd-networkd.service' for details. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ 14.516981] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 16.554461] DMA: Module install successful, device major num = 241 [ 16.561014] DRV: Module install successful [ 16.828766] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 16.836955] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: root root@dra7xx-evm:~# [ 29.748064] random: nonblocking pool is initialized U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 ## Error: "board_findfdt" not defined i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 185 bytes read in 2 ms (89.8 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 3577032 bytes read in 176 ms (19.4 MiB/s) 107792 bytes read in 27 ms (3.8 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3694c8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff50f ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00041-g84382ab (x0284921@bangvideoapps02) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Aug 5 14:52:40 IST 2019 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 Cascade Radar Board [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f2f1e000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025330 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=3cc717e1-02 rw rootwait ip=none cma=64M vmalloc=128M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2439424K/4109312K available (6671K kernel code, 320K rwdata, 2396K rodata, 336K init, 290K bss, 1424128K reserved, 245760K cma-reserved, 2167808K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf8000000 - 0xff800000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7800000 ( 888 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08e302c (9069 kB) [ 0.000000] .init : 0xc08e4000 - 0xc0938000 ( 336 kB) [ 0.000000] .data : 0xc0938000 - 0xc0988220 ( 321 kB) [ 0.000000] .bss : 0xc098a000 - 0xc09d2880 ( 291 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000338] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000346] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000795] Console: colour dummy device 80x30 [ 0.000811] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000817] This ensures that you still see kernel messages. Please [ 0.000822] update your kernel commandline. [ 0.000836] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000848] pid_max: default: 32768 minimum: 301 [ 0.000947] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000956] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001504] Initializing cgroup subsys io [ 0.001521] Initializing cgroup subsys memory [ 0.001545] Initializing cgroup subsys devices [ 0.001557] Initializing cgroup subsys freezer [ 0.001568] Initializing cgroup subsys perf_event [ 0.001579] Initializing cgroup subsys pids [ 0.001605] CPU: Testing write buffer coherency: ok [ 0.001802] /cpus/cpu@0 missing clock-frequency property [ 0.001818] /cpus/cpu@1 missing clock-frequency property [ 0.001829] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001863] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080052] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080122] Brought up 2 CPUs [ 0.080135] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080141] CPU: All CPU(s) started in HYP mode. [ 0.080146] CPU: Virtualization extensions available. [ 0.080523] devtmpfs: initialized [ 0.109510] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110491] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.313709] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.313731] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.318819] pinctrl core: initialized pinctrl subsystem [ 0.319696] NET: Registered protocol family 16 [ 0.320672] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350220] cpuidle: using governor ladder [ 0.380243] cpuidle: using governor menu [ 0.388768] OMAP GPIO hardware version 0.1 [ 0.392710] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.408129] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.408143] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.417235] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.417245] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.417711] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.417721] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.418295] OMAP DMA hardware revision 0.0 [ 0.461447] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462578] edma 43300000.edma: memcpy is disabled [ 0.467253] edma 43300000.edma: TI EDMA DMA engine driver [ 0.471316] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.471502] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.471660] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.471819] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.472095] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.472297] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.475311] palmas 0-0058: IRQ missing: skipping irq request [ 0.490764] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.552642] pcf857x: probe of 0-0020 failed with error -121 [ 0.552895] pcf857x: probe of 0-0021 failed with error -121 [ 0.553781] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554193] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554392] media: Linux media interface: v0.10 [ 0.554446] Linux video capture interface: v2.00 [ 0.554487] pps_core: LinuxPPS API ver. 1 registered [ 0.554495] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554523] PTP clock support registered [ 0.554573] EDAC MC: Ver: 3.0.0 [ 0.555331] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555620] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.555945] Advanced Linux Sound Architecture Driver Initialized. [ 0.556812] clocksource: Switched to clocksource arch_sys_counter [ 0.567414] NET: Registered protocol family 2 [ 0.567920] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.567984] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568108] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568155] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568185] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568327] NET: Registered protocol family 1 [ 0.568638] RPC: Registered named UNIX socket transport module. [ 0.568648] RPC: Registered udp transport module. [ 0.568655] RPC: Registered tcp transport module. [ 0.568661] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569634] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579627] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580272] NFS: Registering the id_resolver key type [ 0.580301] Key type id_resolver registered [ 0.580308] Key type id_legacy registered [ 0.580368] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581641] bounce: pool size: 64 pages [ 0.581799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.581815] io scheduler noop registered [ 0.581827] io scheduler deadline registered [ 0.581862] io scheduler cfq registered (default) [ 0.587335] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590828] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590841] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590875] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590897] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.591105] dra7-pcie 51000000.pcie_rc: CFG 'Bus Master Enable' change [ 0.591114] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617591] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.617605] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.617615] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.617625] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.617688] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617705] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617729] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617744] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617767] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617783] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.618082] PCI: bus0: Fast back to back transfers disabled [ 0.636902] PCI: bus1: Fast back to back transfers disabled [ 0.637030] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.637045] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [ 0.637056] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.637070] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x20203fff 64bit] [ 0.637118] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.637131] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.637343] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.637352] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.698875] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.702263] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 202, base_baud = 3000000) is a 8250 [ 1.802213] console [ttyS0] enabled [ 1.806603] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 203, base_baud = 3000000) is a 8250 [ 1.816304] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 204, base_baud = 3000000) is a 8250 [ 1.826319] [drm] Initialized drm 1.1.0 20060810 [ 1.831879] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.838566] [drm] No driver support for vblank timestamp query. [ 1.844694] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [ 1.851851] OMAP DSS rev 6.1 [ 1.855602] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.871235] loop: module loaded [ 1.874776] vmemexp device MAJOR num = 245 [ 1.878932] vmemexp class registered [ 1.882645] /dev/vmemexp device registered [ 1.886759] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.892306] nvme 0000:01:00.0: enabling device (0140 -> 0142) [ 1.898732] nand: No NAND device found [ 1.902502] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.911606] m25p80 spi32766.0: found n25q00, expected s25fl256s1 [ 1.917699] m25p80 spi32766.0: n25q00 (131072 Kbytes) [ 1.922833] 7 ofpart partitions found on MTD device spi32766.0 [ 1.928710] Creating 7 MTD partitions on "spi32766.0": [ 1.933873] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.950024] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.966336] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.983310] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.999997] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 2.009579] nvme0n1: p1 [ 2.017452] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 2.033802] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 2.051748] libphy: Fixed MDIO Bus: probed [ 2.106844] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.112970] libphy: 48485000.mdio: probed [ 2.130472] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867 [ 2.139429] cpsw 48484000.ethernet: Detected MACID = 78:db:2f:4d:21:9a [ 2.146075] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 2.153055] cpsw 48484000.ethernet: cpsw: Detected MACID = 78:db:2f:4d:21:9b [ 2.161689] mousedev: PS/2 mouse device common for all mice [ 2.177883] i2c /dev entries driver [ 2.186640] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.237393] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.243780] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.256958] evm_3v3_sw: supplied by sysen1 [ 2.317648] ledtrig-cpu: registered to indicate activity on CPUs [ 2.327744] aic_dvdd: supplied by evm_3v3_sw [ 2.332976] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.340490] NET: Registered protocol family 10 [ 2.355803] sit: IPv6 over IPv4 tunneling driver [ 2.361016] NET: Registered protocol family 17 [ 2.365695] Key type dns_resolver registered [ 2.370138] omap_voltage_late_init: Voltage driver support not added [ 2.377052] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.383261] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.389968] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.396175] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.403502] Power Management for TI OMAP4+ devices. [ 2.408635] Registering SWP/SWPB emulation handler [ 2.414760] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.422295] dmm 4e000000.dmm: initialized all PAT entries [ 2.428725] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 2.446568] hctosys: unable to open rtc device (rtc0) [ 2.463685] evm_1v8: disabling [ 2.466765] aic_dvdd: disabling [ 2.470128] ldousb: disabling [ 2.473596] ALSA device list: [ 2.476577] No soundcards found. [ 2.480890] Waiting for root device PARTUUID=3cc717e1-02... [ 2.516249] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.527762] mmc0: new high speed SDHC card at address aaaa [ 2.533726] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 2.539553] mmcblk0: p1 p2 [ 2.587480] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.596061] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.807647] EXT4-fs (mmcblk0p2): recovery complete [ 2.813744] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.821922] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.830408] devtmpfs: mounted [ 2.833598] Freeing unused kernel memory: 336K [ 2.838178] This architecture does not have kernel memory protection. [ 3.035966] systemd[1]: System time before build time, advancing clock. [ 3.077198] random: systemd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 3.090296] random: systemd: uninitialized urandom read (16 bytes read, 17 bits of entropy available) [ 3.101955] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.120472] systemd[1]: Detected architecture arm. Welcome to Arago 2016.12! [ 3.147979] systemd[1]: Set hostname to . [ 3.214136] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 18 bits of entropy available) [ 3.238945] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.249181] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.263248] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.277084] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 19 bits of entropy available) [ 3.363068] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.372589] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.382512] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available) [ 3.664462] systemd[1]: Configuration file /etc/systemd/system/multi-user.target.wants/vsdk.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.682648] systemd[1]: [/etc/systemd/system/multi-user.target.wants/vsdk.service:3] Failed to add dependency on rc.pvr, ignoring: Invalid argument [ 3.783812] systemd[1]: basic.target: Found ordering cycle on basic.target/start [ 3.791300] systemd[1]: basic.target: Found dependency on sysinit.target/start [ 3.798589] systemd[1]: basic.target: Found dependency on alignment.service/start [ 3.806113] systemd[1]: basic.target: Found dependency on basic.target/start [ 3.813247] systemd[1]: basic.target: Breaking ordering cycle by deleting job alignment.service/start [ 3.822538] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with basic.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 3.869724] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 3.898614] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.927764] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 3.957060] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 3.977695] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.007279] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.037185] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.067088] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 4.087080] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.117124] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.147141] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.207234] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.239506] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.254263] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.290468] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 4.304818] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 4.339546] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.369610] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.399755] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.420432] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.427374] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.457097] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.488304] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.517054] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.537261] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.567066] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.632161] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 4.657121] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.687084] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 4.717271] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Setup Virtual Console. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ 5.458189] systemd-journald[135]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ 6.163151] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ 6.184190] remoteproc0: 55020000.ipu is available Starting Create Volatile Files and Directories... [ OK ] Started udev Coldplug all Devices.[ 6.239459] remoteproc0: Note: remoteproc is still under development and considered experimental. [ OK ] Started Load/Save Random Seed. [ 6.293298] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.349005] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ OK ] Started Create Volatile Files and Directories. [ 6.400271] remoteproc1: 40800000.dsp is available [ 6.411877] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 6.444531] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ OK ] Found device /dev/ttyS0. [ 6.489158] remoteproc1: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 6.503373] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000 [ 6.517422] remoteproc1: failed to load dra7-dsp1-fw.xe66 [ 6.530000] remoteproc2: 41000000.dsp is available [ 6.542792] remoteproc2: Note: remoteproc is still under development and considered experimental. [ 6.569604] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 6.584127] remoteproc2: Direct firmware load for dra7-dsp2-fw.xe66 failed with error -2 Starting Update UTMP about System Boot/Shutdown...[ 6.613964] remoteproc2: failed to load dra7-dsp2-fw.xe66 [ 6.630351] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 Starting Network Time Synchronization... [ 6.701545] remoteproc0: registered virtio0 (type 7) [ 6.707913] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 6.799104] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc0 [ OK ] Started Network Time Synchronization. [ 7.019806] SCSI subsystem initialized [ OK ] Reached target System Time Synchronized. [ 7.161839] CAN device driver interface Starting Synchronize System and HW clocks... [ 7.172535] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ OK ] Started Update UTMP about System Boot/Shutdown. [ 7.311998] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ OK ] Started Synchronize System and HW clocks. [ 7.384530] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 7.400221] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=254) [ 7.436260] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 7.450302] ahci 4a140000.sata: Enable 32-bit DMA instead of 64-bit. [ 7.505935] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket.[ 7.560302] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ OK ] Listening on dropbear.socket. [ OK ] Reached target Sockets. [ OK ] Started Daily Cleanup of Temporary Directories. [ 7.675204] scsi host0: ahci [ 7.694322] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 240 [ OK ] Reached target Timers. [ OK ] Reached target Basic System. [ 7.739915] [drm] Initialized pvr 1.14.3699939 20110701 on minor 2 Starting rc.pvr.service... [ OK ] Started System Logging Service. [ OK ] Started Kernel Logging Service. [ 7.929033] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started Launching Vision SDK App. [ 7.990833] EXT4-fs (nvme0n1p1): recovery complete Starting Login Service...[ 8.000162] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 8.011215] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) Starting Permit User Sessions...[ 8.056943] ata1: SATA link down (SStatus 0 SControl 300) [ OK ] Started D-Bus System Message Bus. Starting Network Service... [ OK ] Started rc.pvr.service. [ OK ] Started Permit User Sessions. [ 8.453093] net eth0: initializing cpsw version 1.15 (0) [ 8.471665] net eth0: initialized cpsw ale version 1.4 [ 8.476859] net eth0: ALE Table size 1024 [ 8.524209] net eth0: phy found : id is : 0x2000a231 [ 8.555590] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Network Service. [ 8.728236] remoteproc0: powering up 55020000.ipu [ 8.753663] remoteproc0: Booting fw image dra7-ipu2-fw.xem4, size 4396172 [ 8.764940] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 8.812749] remoteproc0: remote processor 55020000.ipu is now up [ 8.820152] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.863681] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x50 [ 8.892798] NET: Registered protocol family 41 [ OK ] Started Login Service. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Network Service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. Starting weston.service... [ OK ] Started Network Service. [ OK ] Started weston.service. Starting Network Service... Starting tiipclad-daemon.service... Starting telnetd.service... [ OK ] Started tiipclad-daemon.service. [ OK ] Started Network Service. [ OK ] Started telnetd.service. Starting Network Service... [ OK ] Started Network Service. Starting Network Service... [ OK ] Started Network Service. [FAILED] Failed to listen on Network Service Bus Name. See 'systemctl status org.freedesktop.network1.busname' for details. [FAILED] Failed to start Network Service. See 'systemctl status systemd-networkd.service' for details. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ 13.286831] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 15.327754] DMA: Module install successful, device major num = 241 [ 15.334062] DRV: Module install successful _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org dra7xx-evm ttyS0 Arago 2016.12 dra7xx-evm ttyS0 dra7xx-evm login: [ 15.597979] omap_l3_noc 44000000.ocp: L3 application error: target 3 mod:2 (unclearable) [ 15.606212] omap_l3_noc 44000000.ocp: L3 debug error: target 3 mod:2 (unclearable) [ 27.249271] random: nonblocking pool is initialized U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for ethernet@48484000: addr 2 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 ## Error: "board_findfdt" not defined i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 185 bytes read in 2 ms (89.8 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 3577032 bytes read in 175 ms (19.5 MiB/s) 107792 bytes read in 27 ms (3.8 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3694c8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff50f ... OK Starting kernel ... U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Could not get PHY for ethernet@48484000: addr 2 Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 ## Error: "board_findfdt" not defined i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 185 bytes read in 2 ms (89.8 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 switch to partitions #0, OK mmc0 is current device i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 SD/MMC found on device 0 3577032 bytes read in 175 ms (19.5 MiB/s) 107792 bytes read in 27 ms (3.8 MiB/s) Booting from mmc0 ... Kernel image @ 0x82000000 [ 0x000000 - 0x3694c8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe2000, end 8ffff50f ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.84-00041-g84382ab (x0284921@bangvideoapps02) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP PREEMPT Mon Aug 5 14:52:40 IST 2019 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: TI DRA742 Cascade Radar Board [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000040300000, size 3 MiB [ 0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 80 MiB [ 0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009e000000, size 32 MiB [ 0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a1000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a3000000, size 32 MiB [ 0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 64 MiB [ 0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: regions without no-map are not yet supported [ 0.000000] cma: Reserved 64 MiB at 0x00000000bc000000 [ 0.000000] Forcing write-allocate cache policy for SMP [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x000000027fd00000 to fe600000 for dram barrier [ 0.000000] DRA752 ES2.0 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f2f1e000 s14912 r8192 d21952 u45056 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1025330 [ 0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=PARTUUID=3cc717e1-02 rw rootwait ip=none cma=64M vmalloc=128M [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2439424K/4109312K available (6671K kernel code, 320K rwdata, 2396K rodata, 336K init, 290K bss, 1424128K reserved, 245760K cma-reserved, 2167808K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf8000000 - 0xff800000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7800000 ( 888 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08e302c (9069 kB) [ 0.000000] .init : 0xc08e4000 - 0xc0938000 ( 336 kB) [ 0.000000] .data : 0xc0938000 - 0xc0988220 ( 321 kB) [ 0.000000] .bss : 0xc098a000 - 0xc09d2880 ( 291 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000338] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000346] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000792] Console: colour dummy device 80x30 [ 0.000808] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000814] This ensures that you still see kernel messages. Please [ 0.000820] update your kernel commandline. [ 0.000833] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000846] pid_max: default: 32768 minimum: 301 [ 0.000945] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000955] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001500] Initializing cgroup subsys io [ 0.001517] Initializing cgroup subsys memory [ 0.001541] Initializing cgroup subsys devices [ 0.001553] Initializing cgroup subsys freezer [ 0.001565] Initializing cgroup subsys perf_event [ 0.001576] Initializing cgroup subsys pids [ 0.001604] CPU: Testing write buffer coherency: ok [ 0.001803] /cpus/cpu@0 missing clock-frequency property [ 0.001820] /cpus/cpu@1 missing clock-frequency property [ 0.001830] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001864] Setting up static identity map for 0x80008380 - 0x800083e0 [ 0.080052] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.080122] Brought up 2 CPUs [ 0.080135] SMP: Total of 2 processors activated (24.59 BogoMIPS). [ 0.080141] CPU: All CPU(s) started in HYP mode. [ 0.080147] CPU: Virtualization extensions available. [ 0.080527] devtmpfs: initialized [ 0.109493] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.110483] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.314778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.314799] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.319922] pinctrl core: initialized pinctrl subsystem [ 0.320823] NET: Registered protocol family 16 [ 0.321768] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.350228] cpuidle: using governor ladder [ 0.380253] cpuidle: using governor menu [ 0.388782] OMAP GPIO hardware version 0.1 [ 0.392714] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.408102] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.408115] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.417202] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.417213] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.417679] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.417688] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.418260] OMAP DMA hardware revision 0.0 [ 0.461501] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.462630] edma 43300000.edma: memcpy is disabled [ 0.467345] edma 43300000.edma: TI EDMA DMA engine driver [ 0.471402] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.471584] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.471743] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.471901] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.472173] omap-iommu 41501000.mmu: 41501000.mmu registered [ 0.472372] omap-iommu 41502000.mmu: 41502000.mmu registered [ 0.475400] palmas 0-0058: IRQ missing: skipping irq request [ 0.490856] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0 [ 0.552727] pcf857x: probe of 0-0020 failed with error -121 [ 0.552978] pcf857x: probe of 0-0021 failed with error -121 [ 0.553832] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.554239] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.554441] media: Linux media interface: v0.10 [ 0.554494] Linux video capture interface: v2.00 [ 0.554535] pps_core: LinuxPPS API ver. 1 registered [ 0.554543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.554571] PTP clock support registered [ 0.554621] EDAC MC: Ver: 3.0.0 [ 0.555374] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.555665] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.555992] Advanced Linux Sound Architecture Driver Initialized. [ 0.556849] clocksource: Switched to clocksource arch_sys_counter [ 0.567415] NET: Registered protocol family 2 [ 0.567919] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.567982] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.568107] TCP: Hash tables configured (established 8192 bind 8192) [ 0.568154] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.568185] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.568328] NET: Registered protocol family 1 [ 0.568637] RPC: Registered named UNIX socket transport module. [ 0.568646] RPC: Registered udp transport module. [ 0.568653] RPC: Registered tcp transport module. [ 0.568660] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.569621] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.579601] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.580250] NFS: Registering the id_resolver key type [ 0.580278] Key type id_resolver registered [ 0.580286] Key type id_legacy registered [ 0.580343] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.581620] bounce: pool size: 64 pages [ 0.581777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.581792] io scheduler noop registered [ 0.581804] io scheduler deadline registered [ 0.581838] io scheduler cfq registered (default) [ 0.587315] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.590808] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges: [ 0.590820] No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff] [ 0.590853] IO 0x20003000..0x20012fff -> 0x00000000 [ 0.590875] MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.591086] dra7-pcie 51000000.pcie_rc: CFG 'Bus Master Enable' change [ 0.591096] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617585] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00 [ 0.617599] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.617609] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.617619] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.617682] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617699] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617723] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617738] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617760] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.617777] dra7-pcie 51000000.pcie_rc: CFG 'Memory Space Enable' change [ 0.618076] PCI: bus0: Fast back to back transfers disabled [ 0.636940] PCI: bus1: Fast back to back transfers disabled [ 0.637068] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.637084] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [ 0.637095] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.637109] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x20203fff 64bit] [ 0.637157] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.637169] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.637380] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.637389] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.698651] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.702026] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 202, base_baud = 3000000) is a 8250 [ 1.801969] console [ttyS0] enabled [ 1.806358] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 203, base_baud = 3000000) is a 8250 [ 1.816062] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 204, base_baud = 3000000) is a 8250 [ 1.826080] [drm] Initialized drm 1.1.0 20060810 [ 1.831639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.838326] [drm] No driver support for vblank timestamp query. [ 1.844453] [drm] Initialized vdrm 1.0.0 20110917 on minor 0 [ 1.851619] OMAP DSS rev 6.1 [ 1.855367] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 1.871004] loop: module loaded [ 1.874541] vmemexp device MAJOR num = 245 [ 1.878693] vmemexp class registered [ 1.882407] /dev/vmemexp device registered [ 1.886521] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120 [ 1.892072] nvme 0000:01:00.0: enabling device (0140 -> 0142) [ 1.898504] nand: No NAND device found [ 1.902275] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch [ 1.911371] m25p80 spi32766.0: found n25q00, expected s25fl256s1 [ 1.917465] m25p80 spi32766.0: n25q00 (131072 Kbytes) [ 1.922597] 7 ofpart partitions found on MTD device spi32766.0 [ 1.928474] Creating 7 MTD partitions on "spi32766.0": [ 1.933638] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 1.949793] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 1.966106] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 1.983077] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 1.999761] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 2.007170] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 2.019640] nvme0n1: p1 [ 2.023531] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 2.041389] libphy: Fixed MDIO Bus: probed [ 2.096881] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.103006] libphy: 48485000.mdio: probed [ 2.109759] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver TI DP83867 [ 2.118702] cpsw 48484000.ethernet: Detected MACID = 78:db:2f:4d:21:9a [ 2.125356] cpsw 48484000.ethernet: cpts: overflow check period 800 [ 2.132325] cpsw 48484000.ethernet: cpsw: Detected MACID = 78:db:2f:4d:21:9b [ 2.140963] mousedev: PS/2 mouse device common for all mice [ 2.147147] i2c /dev entries driver [ 2.155858] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197538] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.203924] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.210796] evm_3v3_sw: supplied by sysen1 [ 2.247716] ledtrig-cpu: registered to indicate activity on CPUs [ 2.256125] aic_dvdd: supplied by evm_3v3_sw [ 2.261400] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0 [ 2.268900] NET: Registered protocol family 10 [ 2.284211] sit: IPv6 over IPv4 tunneling driver [ 2.289426] NET: Registered protocol family 17 [ 2.294117] Key type dns_resolver registered [ 2.298567] omap_voltage_late_init: Voltage driver support not added [ 2.305456] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.311681] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.318393] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm [ 2.324601] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm [ 2.331952] Power Management for TI OMAP4+ devices. [ 2.337086] Registering SWP/SWPB emulation handler [ 2.343243] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.350823] dmm 4e000000.dmm: initialized all PAT entries [ 2.357254] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1 [ 2.375093] hctosys: unable to open rtc device (rtc0) [ 2.392227] evm_1v8: disabling [ 2.395303] aic_dvdd: disabling [ 2.398672] ldousb: disabling [ 2.402143] ALSA device list: [ 2.405123] No soundcards found. [ 2.409425] Waiting for root device PARTUUID=3cc717e1-02... [ 2.456271] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.467776] mmc0: new high speed SDHC card at address aaaa [ 2.483764] mmcblk0: mmc0:aaaa SL08G 7.40 GiB [ 2.489570] mmcblk0: p1 p2 [ 2.517493] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 2.526118] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 2.730363] EXT4-fs (mmcblk0p2): recovery complete [ 2.736464] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.744642] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.753132] devtmpfs: mounted [ 2.756325] Freeing unused kernel memory: 336K [ 2.760879] This architecture does not have kernel memory protection. [ 2.959208] systemd[1]: System time before build time, advancing clock. U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1 Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Card did not respond to voltage select! ERROR: invalid mmc device at arch/arm/cpu/armv7/omap-common/utils.c:193/mmc_get_part_size() Warning: fastboot.userdata_size: unable to calc SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: Warning: ethernet@48484000 using MAC address from ROM eth0: ethernet@48484000 Hit any key to stop autoboot: 0 U-Boot SPL 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03) DRA752-GP ES2.0 no pinctrl for hs200_1_8v no pinctrl for ddr_1_8v Card did not respond to voltage select! *** Warning - MMC init failed, using default environment Trying to boot from MMC1 reading dra7-ipu2-fw.lzop spl_load_file_fat: error reading file dra7-ipu2-fw.lzop, err - -1 spl: error reading image dra7-ipu2-fw.lzop, err - -1 Error loading remotecore IPU2!,Continuing with boot ... reading dra7-dsp1-fw.lzop spl_load_file_fat: error reading file dra7-dsp1-fw.lzop, err - -1 spl: error reading image dra7-dsp1-fw.lzop, err - -1 Error loading remotecore DSP1!,Continuing with boot ... reading dra7-dsp2-fw.lzop spl_load_file_fat: error reading file dra7-dsp2-fw.lzop, err - -1 spl: error reading image dra7-dsp2-fw.lzop, err - -1 Error loading remotecore DSP2!,Continuing with boot ... reading dra7-ipu1-fw.lzop spl_load_file_fat: error reading file dra7-ipu1-fw.lzop, err - -1 spl: error reading image dra7-ipu1-fw.lzop, err - -1 Error loading remotecore IPU1!,Continuing with boot ... spl: falcon_args_file not set in environment, falling back to default reading single-stage-boot.dtb spl_load_image_fat_os: error reading image single-stage-boot.dtb, err - -1 reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2016.05-00018-g6bc25a5 (Aug 05 2019 - 14:43:03 +0530) CPU : DRA752-GP ES2.0 Model: TI DRA742 Board: DRA74x Cascade EVM REV H.4 DRAM: 4 GiB MMC: i2c_write: error waiting for data ACK (status=0x116) pcf8575_i2c_write_le16 i2c write failed to addr 21 OMAP SD/MMC: 0, OMAP SD/MMC: 1