Packet-Master USB-PDT Report on cambrionix RM_TBT3_U16

Copyright © 2010-2017 MQP Electronics Ltd.
GraphicUSB V5.40.02 -- Scripts PDT Rev:2.0.0.2
Test run on Friday, August 18, 2017 08:50:33
TID: 0
Vendor Name: cambrionix
Product Name: RM TBT3 U16
Version Info: 1
VIF: C:\Users\dominic.plunkett\AppData\Roaming\GraphicUSB\#PdVendorInfoFiles\cambrionix__RM-TBT3-U16__1__0__1.txt
VIF Modified Thursday, August 17, 2017 @ 12:02:41
VIF: Revision 1.12, Version 1.0

The following tests have been selected:

BMC-PROT-SEQ-NOMRK-CP-ACC

Runtime Report

UUT declared to meet Rev 2.0

BMC-PROT-SEQ-NOMRK-CP-ACC

Establish PD Mode...

Initial request accepted...

Request Swap (UUT from Sink to Source)...

Get Source Capabilities from Sink...

Source Capabilities seen...

Swap request completed...

Tester is now behaving as Sink.

PR_Swap was Accepted

Simulating Detach From UUT...

End of Tests.

Post-run Analysis

Vendor Info File Consistency Check

No Vendor Info File inconsistencies found

Test: BMC-PROT-SEQ-NOMRK-CP-ACC (Rev 2.0)

Goal: Get UUT into PD Mode as a Sink (5V/100mA)

Events #35-36 PD Sequence Start (Announce Source Capabilities)
Event #35 PD Message - Source Capabilities (from Tester)
Event #36 PD Message - GoodCRC (from UUT) (SOP)
Events #37-43 PD Sequence Start (Power Transition Request)
Event #37 PD Message - Request (from UUT) (SOP)
Event #38 PD Message - GoodCRC (from Tester) (SOP)
Event #39 PD Message - Accept (from Tester) (SOP)
Event #40 PD Message - GoodCRC (from UUT) (SOP)
(Previous Goal succeeded)
Event #42 PD Message - PS_RDY (from Tester) (SOP)
Event #43 PD Message - GoodCRC (from UUT) (SOP)

Goal: Ensure cable checked during PR_Swap (No Marker).

Events #45-48 PD Sequence Start (Power Role Swap)
Event #45 PD Message - PR_Swap (from UUT)
Event #46 PD Message - GoodCRC (from Tester) (SOP)
Event #47 PD Message - Reject (from Tester) (SOP)
Event #48 PD Message - GoodCRC (from UUT) (SOP)
Events #54-57 PD Sequence Start (Request Source Capabilities)
Event #54 PD Message - Get_Src_Cap (from Tester) (SOP)
Event #55 PD Message - GoodCRC (from UUT) (SOP)
Event #56 PD Message - Source Capabilities (from UUT)
Event #57 PD Message - GoodCRC (from Tester) (SOP)
Events #66-101 PD Sequence Start (Power Role Swap)
Event #66 PD Message - PR_Swap (from Tester)
Event #67 PD Message - GoodCRC (from UUT) (SOP)
Event #68 PD Message - Accept (from UUT) (SOP)
Event #69 PD Message - GoodCRC (from Tester) (SOP)
Event #85 PD Message - PS_RDY (from Tester) (SOP)
Event #86 PD Message - GoodCRC (from UUT) (SOP)
Event #89 PD Message - PS_RDY (from UUT) (SOP)
Event #90 PD Message - GoodCRC (from Tester) (SOP)
Events #94-94 PD Sequence Start (Soft Reset)
Event #94 PD Message - Soft Reset (from Cable or UUT) (SOP')
Events #95-95 PD Sequence Start (Soft Reset)
Event #95 PD Message - Soft Reset (from Cable or UUT) (SOP')
Events #96-96 PD Sequence Start (Soft Reset)
Event #96 PD Message - Soft Reset (from Cable or UUT) (SOP')
Events #97-97 PD Sequence Start (Soft Reset)
Event #97 PD Message - Soft Reset (from Cable or UUT) (SOP')
Events #98-98 PD Sequence Start (VDM Discover ID)
Event #98 PD Message - VDM - Discover ID REQ (Rev 2.0) (from Cable or UUT) (SOP')
Events #99-99 PD Sequence Start (VDM Discover ID)
Event #99 PD Message - VDM - Discover ID REQ (Rev 2.0) (from Cable or UUT) (SOP')
Events #100-100 PD Sequence Start (VDM Discover ID)
Event #100 PD Message - VDM - Discover ID REQ (Rev 2.0) (from Cable or UUT) (SOP')
Events #101-109 PD Sequence Start (VDM Discover ID)
Event #101 PD Message - VDM - Discover ID REQ (Rev 2.0) (from Cable or UUT) (SOP')
Events #102-103 PD Sequence Start (Announce Source Capabilities)
Event #102 PD Message - Source Capabilities (from UUT)
MessageID is not zero after a power role Swap. [PROT_MSG_HDR_3] FAIL
Event #103 PD Message - GoodCRC (from Tester) (SOP)
Events #104-109 PD Sequence Start (Power Transition Request)
Event #104 PD Message - Request (from Tester) (SOP)
Event #105 PD Message - GoodCRC (from UUT) (SOP)
Event #106 PD Message - Accept (from UUT) (SOP)
Event #107 PD Message - GoodCRC (from Tester) (SOP)
Event #108 PD Message - PS_RDY (from UUT) (SOP)
Event #109 PD Message - GoodCRC (from Tester) (SOP)
(Check Previous Goal)

Goal: Simulate UUT Detach.

(Previous Goal succeeded)

For Information Only:

0 Retries by UUT using SOP

6 Retries by UUT using SOP'

0 Retries by Tester using SOP

0 Retries by Tester using SOP'

Error Summary

Error PROT_MSG_HDR_3 found 1 time

1 Post-Run Error - FAIL

0 Runtime Errors

Test Summary

BMC-PROT-SEQ-NOMRK-CP-ACC

BMC-PROT-SEQ-NOMRK-CP-ACC - PASS

BMC-PROT-SEQ-NOMRK-CP-ACC Secondary - FAIL

USB-IF Summary Revision 2.0

BMC PHY Tx: [Required]

BMC PHY Rx: [Required]

BMC PHY Misc: [Required]

Protocol Specific: PASS

Power Specific: [Required]

Secondary: FAIL

End of Report