[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.188+ (ywang136@NJ-CT-UB220) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #2 SMP PREEMPT Wed Dec 15 16:23:44 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [410fd041] [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] [memblock]mediatek,ram_console: 0x43f00000 - 0x43f10000 (0x10000) [ 0.000000] OF: reserved mem: initialized node ram-console-reserved-memory@43f00000, compatible id mediatek,ram_console [ 0.000000] [memblock]mediatek,pstore: 0x43f10000 - 0x43ff0000 (0xe0000) [ 0.000000] OF: reserved mem: initialized node pstore-reserved-memory@43f10000, compatible id ramoops [ 0.000000] [memblock]mediatek,minirdump: 0x43ff0000 - 0x44000000 (0x10000) [ 0.000000] OF: reserved mem: initialized node minirdump-reserved-memory@43ff0000, compatible id mediatek,minirdump [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 [ 0.000000] On node 0 totalpages: 773444 [ 0.000000] DMA zone: 12288 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 773444 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 23 pages/cpu s54936 r8192 d31080 u94208 [ 0.000000] pcpu-alloc: s54936 r8192 d31080 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 761156 [ 0.000000] Kernel command line: console=ttyS0,921600n1 initrd=0x4a000000,32M debugshell=1 printk.disable_uart=0 rootwait ro init=/initfast initcall_debug=0 earlycon=uart8250,mmio32,0x11002000 androidboot.console=ttyS0 androidboot.hardware=mt2712 loop.max_part=7 androidboot.selinux=enforcing dm="1 vroot none ro 1,0 5039048 verity 1 PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b 4096 4096 629881 629881 sha1 58ec57d7c554f447b079149408d44765456850af 661cb19b24909adfbd974a7041eba4a547aae6cfaa40aa90246a60e34ee2865d 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b fec_roots 2 fec_blocks 634842 fec_start 634842" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=bddf6cf0-9871-4b26-8959-4c6ed0e3e953 androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=unlocked androidboot.verifiedbootstate=orange androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=2496 androidboot.vbmet [ 0.000000] device-mapper: init: will configure 1 devices [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 2902496K/3093776K available (11324K kernel code, 1302K rwdata, 4404K rodata, 4800K init, 2027K bss, 158512K reserved, 32768K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008d18000 ( 11328 KB) [ 0.000000] .rodata : 0xffffff8008d18000 - 0xffffff8009178000 ( 4480 KB) [ 0.000000] .init : 0xffffff8009178000 - 0xffffff8009628000 ( 4800 KB) [ 0.000000] .data : 0xffffff8009628000 - 0xffffff800976da00 ( 1303 KB) [ 0.000000] .bss : 0xffffff800976da00 - 0xffffff8009968974 ( 2028 KB) [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03000000 ( 48 MB actual) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0c0000000 ( 3072 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] \x09Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x000000001052f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000005] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.001391] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 147020034397 ns [ 0.003298] Console: colour dummy device 80x25 [ 0.003905] ram_console: buffer start: 0xffffff8008041000, size: 0x10000 [ 0.016679] pmic & external buck: 0xff [ 0.017174] ram_console: CPU notifier status: 0, 0, 0x0, 0 [ 0.017894] ram_console: CPU HPS footprint: 0, 0x0, 0, 0 [ 0.018590] ram_console: last init function: 0x0 [ 0.019420] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000) [ 0.020769] pid_max: default: 32768 minimum: 301 [ 0.021457] Security Framework initialized [ 0.022000] SELinux: Initializing. [ 0.022508] SELinux: Starting in permissive mode [ 0.023162] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.024057] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.025730] ftrace: allocating 35654 entries in 140 pages [ 0.106980] sched-energy: Sched-energy-costs installed from DT [ 0.107760] CPU0: update cpu_capacity 419 [ 0.108297] ASID allocator initialised with 32768 entries [ 0.143843] EFI services will not be available. [ 0.169628] Detected VIPT I-cache on CPU1 [ 0.169698] CPU1: update cpu_capacity 419 [ 0.169701] CPU1: Booted secondary processor [410fd041] [ 0.197646] Detected VIPT I-cache on CPU2 [ 0.197680] CPU2: update cpu_capacity 419 [ 0.197683] CPU2: Booted secondary processor [410fd041] [ 0.225719] Detected VIPT I-cache on CPU3 [ 0.225752] CPU3: update cpu_capacity 419 [ 0.225755] CPU3: Booted secondary processor [410fd041] [ 0.253877] Detected PIPT I-cache on CPU4 [ 0.253885] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000101122, CPU4: 0x00000000001124 [ 0.253891] CPU features: Unsupported CPU feature variation detected. [ 0.253910] CPU4: update cpu_capacity 1024 [ 0.253912] CPU4: Booted secondary processor [410fd083] [ 1.306696] CPU5: failed to come online [ 1.316603] CPU5: failed in unknown state : 0x0 [ 1.317263] Brought up 5 CPUs [ 1.317655] SMP: Total of 5 processors activated. [ 1.318275] CPU features: detected feature: 32-bit EL0 Support [ 1.319052] CPU features: detected feature: Kernel page table isolation (KPTI) [ 1.325129] CPU: All CPU(s) started at EL2 [ 1.325686] alternatives: patching kernel code [ 1.326494] CPU4: update max cpu_capacity 1024 [ 1.328109] CPU3: update max cpu_capacity 419 [ 1.328547] devtmpfs: initialized [ 1.338603] DMI not present or invalid. [ 1.339322] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.340623] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 1.341955] pinctrl core: initialized pinctrl subsystem [ 1.343447] NET: Registered protocol family 16 [ 1.344395] schedtune: init normalization constants... [ 1.345090] schedtune: CLUSTER[0-3] min_pwr: 50 max_pwr: 154 [ 1.345948] schedtune: CPU[0] min_pwr: 0 max_pwr: 69 [ 1.346806] schedtune: CPU[1] min_pwr: 0 max_pwr: 69 [ 1.347663] schedtune: CPU[2] min_pwr: 0 max_pwr: 69 [ 1.348520] schedtune: CPU[3] min_pwr: 0 max_pwr: 69 [ 1.349385] schedtune: CLUSTER[4] min_pwr: 3 max_pwr: 75 [ 1.350242] schedtune: CPU[4] min_pwr: 0 max_pwr: 514 [ 1.351099] schedtune: SYSTEM min_pwr: 53 max_pwr: 1019 [ 1.351957] schedtune: using normalization constants mul: 257875884 sh1: 1 sh2: 9 [ 1.352938] schedtune: verify normalization constants... [ 1.353641] schedtune: max_pwr/2^0: 966 => norm_pwr: 1024 [ 1.354373] schedtune: max_pwr/2^1: 483 => norm_pwr: 512 [ 1.355105] schedtune: max_pwr/2^2: 241 => norm_pwr: 255 [ 1.355836] schedtune: max_pwr/2^3: 120 => norm_pwr: 127 [ 1.356567] schedtune: max_pwr/2^4: 60 => norm_pwr: 63 [ 1.357299] schedtune: max_pwr/2^5: 30 => norm_pwr: 31 [ 1.358035] schedtune: configured to support 5 boost groups [ 1.374068] cpuidle: using governor menu [ 1.375047] vdso: 2 pages (1 code @ ffffff8008d1f000, 1 data @ ffffff800962c000) [ 1.376027] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 1.377516] DMA: preallocated 256 KiB pool for atomic allocations [ 1.378429] mrdump_wd_dram_reserved_mode: DDR Reserved Mode ready or not? (yes) [ 1.379390] mtk_wdt_dram_reserved: set ddr reserved in watchdog probe [ 1.380235] mrdump_wd_dram_reserved_mode: DDR reserved mode enabled [ 1.381058] mrdump_hw_init: init_done. [ 1.381551] mrdump_cblock_init: no mrdump_cb [ 1.382200] mirdump: reserved 43ff0000+2000->ffffff8008093000 [ 1.383007] mrdump_full_init: MT-RAMDUMP no control block [ 1.383833] \x0a MTK_SIP_KERNEL_WDT:0xc2000204 - 0xffffff80087ff82c [ 1.384808] \x0a atf_aee_debug_virt_addr = 0xffffff8008017000 [ 1.385878] ramoops: pstore:address is 0x43f10000, size is 0xe0000, console_size is 0x40000, pmsg_size is 0x10000 [ 1.388933] pstore: using zlib compression [ 1.389756] console [pstore-1] enabled [ 1.390441] pstore: Registered ramoops as persistent store backend [ 1.391267] ramoops: attached 0xe0000@0x43f10000, ecc: 0/0 [ 1.414701] MTK_WDT_NONRST_REG(0) [ 1.415161] mtk_wdt_dram_reserved: MTK_WDT_MODE(0x90) [ 1.415842] mtk-wdt 10007000.watchdog: register restart_handler on reboot_notifier_list for psci reset [ 1.417068] mtk-wdt 10007000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.433457] irq: no irq domain found for /i2c@11007000/rtq5115-regulator ! [ 1.456410] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.459674] iommu: Adding device 14001000.rdma to group 0 [ 1.460413] iommu: Adding device 14002000.rdma to group 0 [ 1.461130] iommu: Adding device 14006000.wdma to group 0 [ 1.461846] iommu: Adding device 14007000.wrot to group 0 [ 1.462561] iommu: Adding device 14008000.wrot to group 0 [ 1.463277] iommu: Adding device 1400c000.ovl to group 0 [ 1.463981] iommu: Adding device 1400d000.ovl to group 0 [ 1.464696] iommu: Adding device 1400e000.rdma to group 0 [ 1.465412] iommu: Adding device 1400f000.rdma to group 0 [ 1.466127] iommu: Adding device 14010000.rdma to group 0 [ 1.466846] iommu: Adding device 14011000.wdma to group 0 [ 1.467561] iommu: Adding device 14012000.wdma to group 0 [ 1.468280] iommu: Adding device 14028000.rdma to group 0 [ 1.469019] iommu: Adding device 1402c000.ovl to group 0 [ 1.469723] iommu: Adding device ovl@1402c100 to group 0 [ 1.470427] iommu: Adding device ovl@1402c200 to group 0 [ 1.471131] iommu: Adding device ovl@1402c300 to group 0 [ 1.471834] iommu: Adding device 1402d000.wdma to group 0 [ 1.472551] iommu: Adding device 14033000.rdma to group 0 [ 1.473277] iommu: Adding device 14034000.wrot to group 0 [ 1.473994] iommu: Adding device 15004000.camsv to group 0 [ 1.474723] iommu: Adding device 15005000.camsv to group 0 [ 1.475449] iommu: Adding device 15007000.camsv to group 0 [ 1.476176] iommu: Adding device 15008000.camsv to group 0 [ 1.476903] iommu: Adding device 15013000.nr to group 0 [ 1.477609] iommu: Adding device 15011000.mediatek-di to group 0 [ 1.478405] iommu: Adding device 15015000.tvd to group 0 [ 1.479113] iommu: Adding device 16000000.codec to group 0 [ 1.479840] iommu: Adding device 16000000.vcu to group 0 [ 1.480546] iommu: Adding device 18004000.codec to group 0 [ 1.481273] iommu: Adding device 19001000.jpegdec to group 0 [ 1.482049] iommu: Adding device dma to group 0 [ 1.482956] vgaarb: loaded [ 1.483332] [FH] mt_fh_init [ 1.483881] [FH] freqhopping_debug_proc_init [ 1.484576] SCSI subsystem initialized [ 1.485246] usbcore: registered new interface driver usbfs [ 1.485998] usbcore: registered new interface driver hub [ 1.486779] usbcore: registered new device driver usb [ 1.489818] Linux video capture interface: v2.00 [ 1.490449] pps_core: LinuxPPS API ver. 1 registered [ 1.491117] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.492327] PTP clock support registered [ 1.492913] dmi: Firmware registration failed. [ 1.494354] Advanced Linux Sound Architecture Driver Initialized. [ 1.495707] NetLabel: Initializing [ 1.496156] NetLabel: domain hash size = 128 [ 1.496729] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.497409] NetLabel: unlabeled traffic allowed by default [ 1.498741] clocksource: Switched to clocksource arch_sys_counter [ 1.518164] VFS: Disk quotas dquot_6.6.0 [ 1.518724] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.525756] NET: Registered protocol family 2 [ 1.526613] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 1.527724] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 1.528902] TCP: Hash tables configured (established 32768 bind 32768) [ 1.529806] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.530654] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.531710] NET: Registered protocol family 1 [ 1.532298] PCI: CLS 0 bytes, default 128 [ 1.545859] Freeing initrd memory: 32768K [ 1.547684] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.548780] kvm [1]: 8-bit VMID [ 1.549196] kvm [1]: IDMAP page: 40b01000 [ 1.549723] kvm [1]: HYP VA range: 4000000000:7fffffffff [ 1.551344] kvm [1]: Hyp mode initialized successfully [ 1.552072] kvm [1]: vgic-v2@10540000 [ 1.552686] kvm [1]: vgic interrupt IRQ1 [ 1.553210] kvm [1]: virtual timer IRQ4 [ 1.556632] audit: initializing netlink subsys (disabled) [ 1.557379] audit: type=2000 audit(1.492:1): initialized [ 1.558537] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.564287] exFAT: Version 1.2.9 [ 1.564778] Registering sdcardfs 0.1 [ 1.565419] ntfs: driver 2.1.32 [Flags: R/O]. [ 1.566132] fuse init (API version 7.26) [ 1.567047] SELinux: Registering netfilter hooks [ 1.570938] io scheduler noop registered [ 1.571592] io scheduler cfq registered (default) [ 1.573854] backlight_lcd0 supply power not found, using dummy regulator [ 1.574924] rl78 driver init ok. [ 1.579827] 8250_mtk_dma 11000400.dma-controller: Using 12 as missing dma-requests property [ 1.581138] 8250_mtk_dma 11000400.dma-controller: Enable APDMA clk for domain: 2 [ 1.585713] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.587625] mt6577-uart 11002000.serial: mtk8250_probe_of data->domain:0 [ 1.588667] console [ttyS0] disabled [ 1.589160] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 255, base_baud = 1625000) is a ST16650V2 [ 1.590395] console [ttyS0] enabled [ 1.591300] bootconsole [uart8250] disabled [ 1.592615] mt6577-uart 11004000.serial: mtk8250_probe_of data->domain:0 [ 1.593574] 11004000.serial: ttyS1 at MMIO 0x11004000 (irq = 256, base_baud = 1625000) is a ST16650V2 [ 1.594998] mt6577-uart 11019000.serial: mtk8250_probe_of data->domain:2 [ 1.595843] mt6577-uart 11019000.serial: Enable uart clk for domain: 2 [ 1.597122] INIT v850 srq [ 1.597565] [drm] Initialized [ 1.598110] mtk_drm_aal_debugfs_dir_init [ 1.598726] request irq success: aal0 irq:288 [ 1.599352] request irq success: aal1 irq:296 [ 1.599792] mediatek-dpi 1401d000.dpi: Found bridge node: /lvds@14026000 [ 1.602217] mediatek-drm 14000000.dispsys: Adding component match for /ovl@1400c000 [ 1.603393] mediatek-drm 14000000.dispsys: Adding component match for /ovl@1400d000 [ 1.604376] mediatek-drm 14000000.dispsys: Adding component match for /rdma@1400e000 [ 1.605417] mediatek-drm 14000000.dispsys: Adding component match for /rdma@1400f000 [ 1.606433] mediatek-drm 14000000.dispsys: Adding component match for /rdma@14010000 [ 1.607667] mediatek-drm 14000000.dispsys: Adding component match for /color@14013000 [ 1.608668] mediatek-drm 14000000.dispsys: Adding component match for /color@14014000 [ 1.609880] mediatek-drm 14000000.dispsys: Adding component match for /dsi@1401b000 [ 1.610902] mediatek-drm 14000000.dispsys: Adding component match for /dpi@1401d000 [ 1.612064] mediatek-drm 14000000.dispsys: Adding component match for /lvds@14026000 [ 1.613076] mediatek-drm 14000000.dispsys: Adding component match for /color@14029000 [ 1.614899] panel supply power not found, using dummy regulator [ 1.616269] Unable to detect cache hierarchy for CPU 0 [ 1.617433] mediatek-drm-lvds 14026000.lvds: Failed to get LVDS PHY: -517 [ 1.624621] loop: module loaded [ 1.625389] zram: Added device: zram0 [ 1.626135] -----miscdiag probe------\x0d [ 1.626666] usb_diag gpio1 is 307\x0d [ 1.627146] usb_diag gpio2 is 309\x0d [ 1.627577] lcd_diag gpio is 320\x0d [ 1.628128] [MT-HOOK]hook_ctrol_init:Entering hook ctrol module. \x0a [ 1.629083] [MT-HOOK]hook_ctrol_init:Successful to register a major number 246. \x0a [ 1.630213] [MT-HOOK]hook_ctrol_init:Class device register success!\x0a [ 1.631254] [MT-HOOK]hook_ctrol_init:hook ctrol module register successful. \x0a [ 1.632353] netlink_hook_init [ 1.632732] [MT-HOOK]netlink_hook_init:hook root (ioctl 1) start.\x0a [ 1.634175] mt2712-rtc 10011000.rtc: rtc_hw_init rtc p1 is a357, p2 is 67d2! [ 1.635309] mt2712-rtc 10011000.rtc: rtc_hw_init [RTC] now = 2019/1/1 0:51:41 [ 1.636412] rtc rtc0: mt2712-rtc: dev (251:0) [ 1.636969] mt2712-rtc 10011000.rtc: rtc core: registered mt2712-rtc as rtc0 [ 1.639978] __power_supply_register: Expected proper parent device for 'ac' [ 1.640925] __power_supply_register: Expected proper parent device for 'battery' [ 1.641979] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 1.643165] mali 13040000.mali: Continuing without Mali regulator control [ 1.644021] mali 13040000.mali: Continuing without Mali clock control [ 1.645114] mali 13040000.mali: mfg ecc support is enable [ 1.645990] mali 13040000.mali: GPU identified as 0x0880 r1p0 status 8 [ 1.647006] mali 13040000.mali: Protected mode not available [ 1.648257] mali 13040000.mali: Probed as mali0 [ 1.649326] mrdump_sysfs_init: done. [ 1.649975] MRDUMP_KEY:node mediatek, mrdump_ext_rst-eint is not exist [ 1.651184] arch_timer_probe ioremap success [ 1.651726] arch_timer_probe with ret:0 [ 1.652324] arch_timer_probe ioremap success [ 1.652864] arch_timer_probe with ret:0 [ 1.653920] mtk-spi 11016000.spi: failed to get spare-clk [ 1.654910] spidev spi32766.0: buggy DT: spidev listed directly in DT [ 1.657317] libphy: Fixed MDIO Bus: probed [ 1.657882] tun: Universal TUN/TAP device driver, 1.6 [ 1.658517] tun: (C) 1999-2004 Max Krasnyansky [ 1.660065] dwmac-mediatek 1101c000.eth: Cannot get CSR clock [ 1.660800] dwmac-mediatek 1101c000.eth: no reset control found [ 1.661685] dwmac-mediatek 1101c000.eth: User ID: 0x12, Synopsys ID: 0x42 [ 1.662540] dwmac-mediatek 1101c000.eth: \x09DWMAC4/5 [ 1.663158] dwmac-mediatek 1101c000.eth: DMA HW capability register supported [ 1.664056] dwmac-mediatek 1101c000.eth: RX Checksum Offload Engine supported [ 1.664952] dwmac-mediatek 1101c000.eth: TX Checksum insertion supported [ 1.665794] dwmac-mediatek 1101c000.eth: Wake-Up On Lan supported [ 1.678742] libphy: stmmac: probed [ 1.680152] PPP generic driver version 2.4.2 [ 1.680817] PPP BSD Compression module registered [ 1.681410] PPP Deflate Compression module registered [ 1.682062] PPP MPPE Compression module registered [ 1.682666] NET: Registered protocol family 24 [ 1.683276] usbcore: registered new interface driver asix [ 1.684044] usbcore: registered new interface driver ax88179_178a [ 1.684834] usbcore: registered new interface driver cdc_ether [ 1.685629] usbcore: registered new interface driver dm9601 [ 1.686350] usbcore: registered new interface driver sr9700 [ 1.687147] usbcore: registered new interface driver smsc75xx [ 1.687897] usbcore: registered new interface driver smsc95xx [ 1.688682] usbcore: registered new interface driver net1080 [ 1.689415] usbcore: registered new interface driver rndis_host [ 1.690222] usbcore: registered new interface driver cdc_subset [ 1.691027] usbcore: registered new interface driver zaurus [ 1.691790] usbcore: registered new interface driver cdc_ncm [ 1.692551] usbcore: registered new interface driver qmi_wwan [ 1.693378] usb82512_i2c_probe [ 1.707126] usb82512 1-002c: I2C xfer error [ 1.707661] usb82512: probe of 1-002c failed with error -5 [ 1.709006] 11271000.usb supply vusb33 not found, using dummy regulator [ 1.710030] mtu3 11271000.usb: uwk - reg:0x510, version:2 [ 1.710842] mtu3 11271000.usb: couldn't get extcon device [ 1.711678] 112c1000.usb supply vusb33 not found, using dummy regulator [ 1.712661] mtu3 112c1000.usb: uwk - reg:0x514, version:2 [ 1.713386] mtu3 112c1000.usb: dr_mode: 3, is_u3_dr: 0, u3p_dis_msk: 1, drd: manual [ 1.714529] mtu3 112c1000.usb: irq 278 [ 1.715024] mtu3 112c1000.usb: IP version 0x20150504(U2 IP) [ 1.715730] mtu3 112c1000.usb: fifosz/epnum: Tx=0x2000/8, Rx=0x2000/8 [ 1.716549] mtu3 112c1000.usb: max_speed: high-speed [ 1.717178] mtu3 112c1000.usb: dma mask: 36 bits [ 1.718281] mtu3 112c1000.usb: xHCI platform device register success... [ 1.719155] mtu3 112c1000.usb: only usb20 can register dual role instance [ 1.720538] 112c0000.xhci supply vbus not found, using dummy regulator [ 1.721393] 112c0000.xhci supply vusb33 not found, using dummy regulator [ 1.722374] xhci-mtk 112c0000.xhci: xHCI Host Controller [ 1.723067] xhci-mtk 112c0000.xhci: new USB bus registered, assigned bus number 1 [ 1.724191] xhci-mtk 112c0000.xhci: hcc params 0x01400199 hci version 0x96 quirks 0x00210010 [ 1.725279] xhci-mtk 112c0000.xhci: irq 324, io mem 0x112c0000 [ 1.726151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.727063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.727973] usb usb1: Product: xHCI Host Controller [ 1.728587] usb usb1: Manufacturer: Linux 4.9.188+ xhci-hcd [ 1.729288] usb usb1: SerialNumber: 112c0000.xhci [ 1.730293] hub 1-0:1.0: USB hub found [ 1.730836] hub 1-0:1.0: 2 ports detected [ 1.731526] xhci-mtk 112c0000.xhci: xHCI Host Controller [ 1.732200] xhci-mtk 112c0000.xhci: new USB bus registered, assigned bus number 2 [ 1.733174] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.734240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.735114] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.736023] usb usb2: Product: xHCI Host Controller [ 1.736637] usb usb2: Manufacturer: Linux 4.9.188+ xhci-hcd [ 1.737338] usb usb2: SerialNumber: 112c0000.xhci [ 1.738251] hub 2-0:1.0: USB hub found [ 1.738755] hub 2-0:1.0: 1 port detected [ 1.739540] usbcore: registered new interface driver cdc_acm [ 1.740253] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.741309] usbcore: registered new interface driver cdc_wdm [ 1.742093] usbcore: registered new interface driver usb-storage [ 1.743030] usbcore: registered new interface driver usbserial [ 1.743814] usbcore: registered new interface driver option [ 1.744559] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.745513] usbcore: registered new interface driver carplay [ 1.746595] mousedev: PS/2 mouse device common for all mice [ 1.747815] input: mtk-kpd as /devices/platform/10010000.keypad/input/input0 [ 1.749745] i2c /dev entries driver [ 1.751091] mtk-mipicsi 15004000.camsv: Waiting for larb device /larb@15001000 [ 1.752176] mtk-mipicsi 15005000.camsv: Waiting for larb device /larb@15001000 [ 1.752299] isl79987 1-0044: chip found @ 0x88 (i2c-mt65xx) [ 1.752309] isl79987 1-0044: client->dev name is 1-0044 [ 1.754529] mtk-mipicsi 15007000.camsv: Waiting for larb device /larb@15001000 [ 1.755543] mtk-mipicsi 15008000.camsv: Waiting for larb device /larb@15001000 [ 1.756684] mtk_seninf 10217000.seninf: There are 4 seninf_mux in /seninf@10217000 node [ 1.757743] mtk_seninf 10217000.seninf: seninf0 node parse done [ 1.758583] mtk_seninf 10218000.seninf: There are 2 seninf_mux in /seninf@10218000 node [ 1.759645] mtk_seninf 10218000.seninf: seninf1 node parse done [ 1.760676] mtk_vcu 16000000.vcu: vcu iommudom: ffffffc0b9bbe760,vcuid:0 [ 1.766882] ------------------- vdev->dev.name = vido0 [ 1.767773] [MTK_V4L2] level=0 mtk_vcodec_probe(),358: decoder registered as /dev/video0 [ 1.769057] ++++++++++++++++ v4l2_dev->name = mtk-jpeg 19001000.jpegdec [ 1.769902] ------------------- vdev->dev.name = vido3 [ 1.770639] mtk-jpeg 19001000.jpegdec: decoder device registered as /dev/video3 (81,1) [ 1.772936] ------------------- vdev->dev.name = vido1 [ 1.773818] [MTK_V4L2] level=0 mtk_vcodec_probe(),402: encoder registered as /dev/video1 [ 1.775391] ++++++++++++++++ v4l2_dev->name = mtk-ovl 1402c000.ovl [ 1.776188] ------------------- vdev->dev.name = vido2 [ 1.781253] ++++++++++++++++ v4l2_dev->name = mtk-ovl ovl@1402c100 [ 1.782045] ------------------- vdev->dev.name = vido4 [ 1.783097] ++++++++++++++++ v4l2_dev->name = mtk-ovl ovl@1402c200 [ 1.783889] ------------------- vdev->dev.name = vido5 [ 1.784847] ++++++++++++++++ v4l2_dev->name = mtk-ovl ovl@1402c300 [ 1.785638] ------------------- vdev->dev.name = vido6 [ 1.786886] ++++++++++++++++ v4l2_dev->name = mtk-wdma 1402d000.wdma [ 1.787691] ------------------- vdev->dev.name = vido7 [ 1.791283] ++++++++++++++++ v4l2_dev->name = mtk-mdp 14001000.rdma [ 1.792100] ------------------- vdev->dev.name = vido8 [ 1.793005] mtk-mdp 14001000.rdma: driver registered as /dev/video8 [ 1.799914] ++++++++++++++++ v4l2_dev->name = mtk-mdp 14002000.rdma [ 1.800726] ------------------- vdev->dev.name = vido9 [ 1.801567] mtk-mdp 14002000.rdma: driver registered as /dev/video9 [ 1.803443] ++++++++++++++++ v4l2_dev->name = mtk-nr 15013000.nr [ 1.804221] ------------------- vdev->dev.name = vido10 [ 1.807344] ++++++++++++++++ v4l2_dev->name = mtk-di 15011000.mediatek-di [ 1.808222] ------------------- vdev->dev.name = vido11 [ 1.809812] device-mapper: uevent: version 1.0.3 [ 1.810649] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.811126] isl79987 1-0044: Renesas isl79987 id:87 [ 1.811269] isl79987 1-0044: rev: 1 is found. [ 1.811589] ++++++++++++++++ v4l2_dev->name = mtk-mdp 14028000.rdma [ 1.811613] ------------------- vdev->dev.name = vido12 [ 1.811884] mtk-mdp 14028000.rdma: driver registered as /dev/video12 [ 1.814397] ++++++++++++++++ v4l2_dev->name = mtk-mdp 14033000.rdma [ 1.814419] ------------------- vdev->dev.name = vido13 [ 1.814638] mtk-mdp 14033000.rdma: driver registered as /dev/video13 [ 1.818008] cpu cpu0: dummy supplies not allowed [ 1.818614] failed to get proc regulator for cpu0 [ 1.819244] cpu cpu0: dummy supplies not allowed [ 1.820427] cpu cpu4: dummy supplies not allowed [ 1.821025] failed to get proc regulator for cpu4 [ 1.821634] cpu cpu4: dummy supplies not allowed [ 1.829323] isl79987 1-0044: ***************init success*************** [ 1.830258] isl79987 1-0045: chip found @ 0x8a (i2c-mt65xx) [ 1.831006] isl79987 1-0045: client->dev name is 1-0045 [ 1.831668] isl79987 1-0045: ***************init success*************** [ 1.832548] isl79987 1-0047: chip found @ 0x8e (i2c-mt65xx) [ 1.833257] isl79987 1-0047: client->dev name is 1-0047 [ 1.833918] isl79987 1-0047: ***************init success*************** [ 1.835059] ub954 1-0030: chip found @ 0x30 (i2c-mt65xx) [ 1.873532] ledtrig-cpu: registered to indicate activity on CPUs [ 1.876416] hidraw: raw HID events driver (C) Jiri Kosina [ 1.876553] ub954 1-0030: ***************init success*************** [ 1.878305] usbcore: registered new interface driver usbhid [ 1.879044] usbhid: USB HID core driver [ 1.880095] ion_heap_create: Heap type is disabled: 1 [ 1.880750] mtk-ion dma: ion heap(1) create fail(ffffffffffffffea) [ 1.881896] ashmem: initialized [ 1.883931] mtk-iommu 1020a000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.884977] mtk-iommu 1020a000.iommu: bound 14030000.larb (ops mtk_smi_larb_component_ops) [ 1.886017] mtk-iommu 1020a000.iommu: bound 14032000.larb (ops mtk_smi_larb_component_ops) [ 1.889009] mtk-iommu 10205000.iommu: bound 14021000.larb (ops mtk_smi_larb_component_ops) [ 1.892067] mtk-iommu 10205000.iommu: bound 16010000.larb (ops mtk_smi_larb_component_ops) [ 1.893117] mtk-iommu 10205000.iommu: bound 15001000.larb (ops mtk_smi_larb_component_ops) [ 1.894156] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.895219] mtk-iommu 10205000.iommu: bound 18002000.larb (ops mtk_smi_larb_component_ops) [ 1.898678] mt2712_codec_dev_probe set dev name mt2712-codec [ 1.905909] dummy_codec_probe set dev name dummy-codec [ 1.906848] mt2712-d1v1 sound: Property 'audio-codec-i2so0' missing, use dummy codec [ 1.908712] mt2712-d1v1 sound: snd-soc-dummy-dai <-> PCM_BT_DL mapping ok [ 1.910005] mt2712-d1v1 sound: snd-soc-dummy-dai <-> PCM_BT_UL mapping ok [ 1.911289] mt2712-d1v1 sound: snd-soc-dummy-dai <-> PCM_TDMO0 mapping ok [ 1.912751] mt2712-d1v1 sound: snd-soc-dummy-dai <-> PCM_TDMO1 mapping ok [ 1.913972] mt2712-d1v1 sound: snd-soc-dummy-dai <-> PCM_TDMIN mapping ok [ 1.914873] mt2712-d1v1 sound: snd-soc-dummy-dai <-> I2S0 mapping ok [ 1.915706] mt2712-d1v1 sound: snd-soc-dummy-dai <-> I2S1 mapping ok [ 1.916532] mt2712-d1v1 sound: snd-soc-dummy-dai <-> I2S2 mapping ok [ 1.917358] mt2712-d1v1 sound: snd-soc-dummy-dai <-> I2S3 mapping ok [ 1.918184] mt2712-d1v1 sound: bt-sco-pcm-wb <-> MRG BT mapping ok [ 1.919010] mt2712-d1v1 sound: snd-soc-dummy-dai <-> MOD PCM mapping ok [ 1.919870] mt2712-d1v1 sound: snd-soc-dummy-dai <-> TDMO0 mapping ok [ 1.920707] mt2712-d1v1 sound: snd-soc-dummy-dai <-> TDMO1 mapping ok [ 1.921541] mt2712-d1v1 sound: snd-soc-dummy-dai <-> TDMIN mapping ok [ 1.922374] mt2712-d1v1 sound: mt2712-codec-aadc <-> AADC mapping ok [ 1.925312] Mirror/redirect action on [ 1.925788] u32 classifier [ 1.926131] Performance counters on [ 1.926613] input device check on [ 1.927093] Actions configured [ 1.927526] Netfilter messages via NETLINK v0.30. [ 1.928296] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.929160] ctnetlink v0.93: registering with nfnetlink. [ 1.930130] xt_time: kernel timezone is -0000 [ 1.930778] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.931755] IPv4 over IPsec tunneling driver [ 1.932653] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.933438] arp_tables: arp_tables: (C) 2002 David S. Miller [ 1.934188] Initializing XFRM netlink socket [ 1.935034] NET: Registered protocol family 10 [ 1.940282] mip6: Mobile IPv6 [ 1.940669] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.941760] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.943021] NET: Registered protocol family 17 [ 1.943593] NET: Registered protocol family 15 [ 1.944179] Bridge firewalling registered [ 1.944685] 8021q: 802.1Q VLAN Support v1.8 [ 1.945236] 9pnet: Installing 9P2000 support [ 1.946055] Registered cp15_barrier emulation handler [ 1.946701] Registered setend emulation handler [ 1.947111] rl78 driver local init ok. [ 1.947115] alsps real driver rl78 probe ok [ 1.948797] registered taskstats version 1 [ 1.957753] backlight_lcd0 supply power not found, using dummy regulator [ 1.959508] mediatek-dpi 1401d000.dpi: Found bridge node: /lvds@14026000 [ 1.959679] 11271000.usb supply vusb33 not found, using dummy regulator [ 1.959855] mtu3 11271000.usb: uwk - reg:0x510, version:2 [ 1.959933] mtu3 11271000.usb: dr_mode: 3, is_u3_dr: 0, u3p_dis_msk: 1, drd: manual [ 1.960014] mtu3 11271000.usb: irq 277 [ 1.960024] mtu3 11271000.usb: IP version 0x20150504(U2 IP) [ 1.960031] mtu3 11271000.usb: fifosz/epnum: Tx=0x2000/8, Rx=0x2000/8 [ 1.960043] mtu3 11271000.usb: max_speed: high-speed [ 1.960048] mtu3 11271000.usb: dma mask: 36 bits [ 1.960475] 11270000.xhci supply vbus not found, using dummy regulator [ 1.960501] 11270000.xhci supply vusb33 not found, using dummy regulator [ 1.960639] xhci-mtk 11270000.xhci: xHCI Host Controller [ 1.960651] xhci-mtk 11270000.xhci: new USB bus registered, assigned bus number 3 [ 1.961407] xhci-mtk 11270000.xhci: hcc params 0x01400199 hci version 0x96 quirks 0x00210010 [ 1.961433] xhci-mtk 11270000.xhci: irq 325, io mem 0x11270000 [ 1.961537] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.961540] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.961543] usb usb3: Product: xHCI Host Controller [ 1.961545] usb usb3: Manufacturer: Linux 4.9.188+ xhci-hcd [ 1.961547] usb usb3: SerialNumber: 11270000.xhci [ 1.961923] hub 3-0:1.0: USB hub found [ 1.961942] hub 3-0:1.0: 2 ports detected [ 1.962118] xhci-mtk 11270000.xhci: xHCI Host Controller [ 1.962126] xhci-mtk 11270000.xhci: new USB bus registered, assigned bus number 4 [ 1.962167] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.962232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.962235] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.962237] usb usb4: Product: xHCI Host Controller [ 1.962239] usb usb4: Manufacturer: Linux 4.9.188+ xhci-hcd [ 1.962241] usb usb4: SerialNumber: 11270000.xhci [ 1.963261] hub 4-0:1.0: USB hub found [ 1.963278] hub 4-0:1.0: 1 port detected [ 1.963428] mtu3 11271000.usb: xHCI platform device register success... [ 1.963457] mtu3 11271000.usb: only usb20 can register dual role instance [ 1.963809] mtk-mipicsi 15004000.camsv: mipicsi node parse done [ 1.963831] mtk-mipicsi 15004000.camsv: camsv get seninf0 info [ 1.972071] ++++++++++++++++ v4l2_dev->name = mtk-mipicsi 15004000.camsv [ 1.972391] +++++++++++++++++++++ soc_camera_device_register() [ 1.972398] ---------------------- soc_of_bind() [ 1.972420] --------------------- clk_name = 1-0044 [ 1.972423] ---------------------- v4l2_async_notifier_register() [ 1.972431] soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 [ 1.972431] ---------------------- soc_camera_probe() [ 1.972535] ------------------- vdev->dev.name = vido14 [ 1.973198] random: fast init done [ 1.973582] mtk-mipicsi 15004000.camsv: multiple subdevices aren't supported yet! [ 1.973596] +++++++++++++++++++++ scan_of_host() [ 1.973599] ################## mipicsi->soc_host.drv_name = mtk-mipicsi0 mipicsi->soc_host.nr = 0 [ 1.973613] mtk-mipicsi 15004000.camsv: probe done [ 1.974048] mtk-mipicsi 15005000.camsv: mipicsi node parse done [ 1.974086] mtk-mipicsi 15005000.camsv: camsv get seninf0 info [ 1.975497] mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10] [ 1.976460] mmc0: new HS400 MMC card at address 0001 [ 1.983096] ++++++++++++++++ v4l2_dev->name = mtk-mipicsi 15005000.camsv [ 1.983136] mmcblk0: mmc0:0001 DA6032 29.1 GiB [ 1.983525] +++++++++++++++++++++ soc_camera_device_register() [ 1.983532] ---------------------- soc_of_bind() [ 1.983541] --------------------- clk_name = 1-0045 [ 1.983544] ---------------------- v4l2_async_notifier_register() [ 1.983553] soc-camera-pdrv soc-camera-pdrv.1: Probing soc-camera-pdrv.1 [ 1.983554] ---------------------- soc_camera_probe() [ 1.983633] ------------------- vdev->dev.name = vido15 [ 1.983792] mmcblk0boot0: mmc0:0001 DA6032 partition 1 4.00 MiB [ 1.983880] mtk-mipicsi 15005000.camsv: multiple subdevices aren't supported yet! [ 1.983881] +++++++++++++++++++++ scan_of_host() [ 1.983883] ################## mipicsi->soc_host.drv_name = mtk-mipicsi1 mipicsi->soc_host.nr = 1 [ 1.983896] mtk-mipicsi 15005000.camsv: probe done [ 1.984273] mtk-mipicsi 15007000.camsv: mipicsi node parse done [ 1.984296] mtk-mipicsi 15007000.camsv: camsv get seninf0 info [ 1.986914] mmcblk0boot1: mmc0:0001 DA6032 partition 2 4.00 MiB [ 1.987158] mmcblk0rpmb: mmc0:0001 DA6032 partition 3 4.00 MiB [ 1.989773] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 [ 1.995171] ++++++++++++++++ v4l2_dev->name = mtk-mipicsi 15007000.camsv [ 1.995291] mmcblk0boot1: p1 p2 [ 1.995893] +++++++++++++++++++++ soc_camera_device_register() [ 1.995901] ---------------------- soc_of_bind() [ 1.995911] --------------------- clk_name = 1-0047 [ 1.995914] ---------------------- v4l2_async_notifier_register() [ 1.995920] soc-camera-pdrv soc-camera-pdrv.2: Probing soc-camera-pdrv.2 [ 1.995921] ---------------------- soc_camera_probe() [ 1.996001] ------------------- vdev->dev.name = vido16 [ 1.996134] mtk-mipicsi 15007000.camsv: multiple subdevices aren't supported yet! [ 1.996135] +++++++++++++++++++++ scan_of_host() [ 1.996137] ################## mipicsi->soc_host.drv_name = mtk-mipicsi3 mipicsi->soc_host.nr = 3 [ 1.996147] mtk-mipicsi 15007000.camsv: probe done [ 1.996529] mtk-mipicsi 15008000.camsv: mipicsi node parse done [ 1.996576] mtk-mipicsi 15008000.camsv: camsv get seninf1 info [ 1.998020] mmcblk0boot0: p1 p2 [ 2.004535] ++++++++++++++++ v4l2_dev->name = mtk-mipicsi 15008000.camsv [ 2.004749] +++++++++++++++++++++ soc_camera_device_register() [ 2.004756] ---------------------- soc_of_bind() [ 2.004765] --------------------- clk_name = 1-0030 [ 2.004768] ---------------------- v4l2_async_notifier_register() [ 2.004774] soc-camera-pdrv soc-camera-pdrv.3: Probing soc-camera-pdrv.3 [ 2.004775] ---------------------- soc_camera_probe() [ 2.004797] ------------------- vdev->dev.name = vido17 [ 2.004937] mtk-mipicsi 15008000.camsv: multiple subdevices aren't supported yet! [ 2.004938] +++++++++++++++++++++ scan_of_host() [ 2.004940] ################## mipicsi->soc_host.drv_name = mtk-mipicsi4 mipicsi->soc_host.nr = 4 [ 2.004955] mtk-mipicsi 15008000.camsv: probe done [ 2.005053] backlight_lcd0 supply power not found, using dummy regulator [ 2.005756] mtk_dfd mtk_dfd: no 'mediatek,rg_dfd_timeout' property [ 2.005759] mtk_dfd mtk_dfd: enable wdt mcu latch [ 2.005777] mtk_dfd mtk_dfd: dfd->start: 0xffffff800e140000(0x49000000), dfd->size: 0x32000 [ 2.005969] irq: no irq domain found for /i2c@11007000/rtq5115-regulator ! [ 2.006057] input: rtq5115_pwrkey as /devices/virtual/input/input1 [ 2.006245] mt2712-rtc 10011000.rtc: setting system clock to 2019-01-01 00:51:41 UTC (1546303901) [ 2.006838] mmc1_vmmc: disabling [ 2.006842] ALSA device list: [ 2.006843] #0: mt2712-d1v1 [ 2.006937] backlight_lcd0 supply power not found, using dummy regulator [ 2.007222] backlight_lcd0 supply power not found, using dummy regulator [ 2.044491] mediatek-drm 14000000.dispsys: bound 1400c000.ovl (ops mtk_disp_ovl_component_ops) [ 2.045580] mediatek-drm 14000000.dispsys: bound 1400d000.ovl (ops mtk_disp_ovl_component_ops) [ 2.046666] mediatek-drm 14000000.dispsys: bound 1400e000.rdma (ops mtk_disp_rdma_component_ops) [ 2.047806] mediatek-drm 14000000.dispsys: bound 1400f000.rdma (ops mtk_disp_rdma_component_ops) [ 2.048912] mediatek-drm 14000000.dispsys: bound 14010000.rdma (ops mtk_disp_rdma_component_ops) [ 2.050021] mediatek-drm 14000000.dispsys: bound 14013000.color (ops mtk_disp_color_component_ops) [ 2.051213] mediatek-drm 14000000.dispsys: bound 14014000.color (ops mtk_disp_color_component_ops) [ 2.052460] mediatek-drm 14000000.dispsys: bound 1401b000.dsi (ops mtk_dsi_component_ops) [ 2.053509] mediatek-drm 14000000.dispsys: bound 1401d000.dpi (ops mtk_dpi_component_ops) [ 2.054540] mediatek-drm 14000000.dispsys: bound 14026000.lvds (ops mtk_lvds_component_ops) [ 2.055601] mediatek-drm 14000000.dispsys: bound 14029000.color (ops mtk_disp_color_component_ops) [ 2.056741] [drm] mtk cmdq enabled [ 2.057253] [drm] mtk cmdq enabled [ 2.057728] mediatek-drm 14000000.dispsys: Not creating crtc 2 because component 11 is disabled or missing [ 2.058962] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.059793] [drm] No driver support for vblank timestamp query. [ 2.060549] [drm:mtk_drm_debugfs_init] mtk_drm_debugfs_init [ 2.061303] [drm] np[1] map fail [ 2.061711] [drm] np[2] map fail [ 2.062126] [drm:mtk_drm_debugfs_init] mtk_drm_debugfs_init..done [ 2.063719] backlight_lcd0 supply power not found, using dummy regulator [ 2.239013] hub 3-0:1.0: port_event:port1:1 connect_change:1 portstatus: 0101 portchange: 0000 [ 2.299015] usb usb3-port1: port1:1, portstatus:0x0503,portchange:0x0010 [ 2.358982] usb 3-1: new high-speed USB device number 2 using xhci-mtk [ 2.443010] usb usb3-port1: port1:1, portstatus:0x0503,portchange:0x0010 [ 2.541268] usb 3-1: New USB device found, idVendor=03f0, idProduct=af07 [ 2.542118] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.543049] usb 3-1: Product: v117b [ 2.543495] usb 3-1: Manufacturer: HP [ 2.543961] usb 3-1: SerialNumber: AA00000000000350 [ 2.545631] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.551063] scsi host0: usb-storage 3-1:1.0 [ 2.552316] backlight_lcd0 supply power not found, using dummy regulator [ 3.882860] scsi 0:0:0:0: Direct-Access hp v117b 1100 PQ: 0 ANSI: 0 CCS [ 3.885267] sd 0:0:0:0: [sda] 7913472 512-byte logical blocks: (4.05 GB/3.77 GiB) [ 3.886993] sd 0:0:0:0: [sda] Write Protect is off [ 3.887606] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 3.889136] backlight_lcd0 supply power not found, using dummy regulator [ 3.890709] sd 0:0:0:0: [sda] No Caching mode page found [ 3.891473] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.896570] sda: sda4 [ 3.899624] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.963244] [bmi160_a] bma_i2c_read_block 494: dma read failed! [ 3.964790] [bmi160_a] bma_i2c_read_block 494: dma read failed! [ 3.965540] [bmi160_a] BMI160_ACC_CheckDeviceID 829: read chip id failed. [ 3.966404] [bmi160_a] bmi160_acc_i2c_probe 2280: bmi160_acc_i2c_probe: err = -1 [ 3.967380] bmi160_acc: probe of 3-0018 failed with error -1 [ 3.968323] acc_real_driver_init 289 : bmi160_acc probe fail(-1)! [ 3.969278] acc_real_driver_init 294 : acc_real_driver_init fail [ 3.970474] acc_probe 578 : ----accel_probe fail !!! [ 3.971320] device-mapper: init: attempting early device configuration. [ 3.973242] device-mapper: init: adding target '0 5039048 verity 1 PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b 4096 4096 629881 629881 sha1 58ec57d7c554f447b079149408d44765456850af 661cb19b24909adfbd974a7041eba4a547aae6cfaa40aa90246a60e34ee2865d 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=fb6c228e-7a1a-4397-90cf-0b4ed98de80b fec_roots 2 fec_blocks 634842 fec_start 634842' [ 3.984364] device-mapper: init: dm-0 is ready [ 3.989267] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities [ 3.990861] EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities [ 3.997857] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 3.998928] VFS: Mounted root (ext4 filesystem) readonly on device 253:0. [ 4.004019] devtmpfs: mounted [ 4.005898] Freeing unused kernel memory: 4800K [ 4.043135] init: init first stage started! [ 4.044040] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 4.047709] init: [libfs_mgr]dt_fstab: Using a specified mount point /mnt/mtkdata for mtkdata [ 4.052724] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab [ 4.054236] init: [libfs_mgr]dt_fstab: Using a specified mount point /mnt/mtkdata for mtkdata [ 4.078058] @@@ pixclock 47500000 [ 4.080489] [drm:mtk_drm_crtc_enable] mtk_drm_crtc_enable 44 [ 4.081296] [drm:mtk_drm_crtc_enable] mtk_crtc_ddp_hw_init [ 4.082126] [drm:mtk_drm_crtc_enable] mtk_crtc_ddp_clk_enable [ 4.083062] [drm:mtk_drm_crtc_enable] mediatek_ddp_ddp_path_setup [ 4.085598] [drm:mtk_drm_gem_create] cookie = ffffff800e1a3000 dma_addr = 0x00000000fb400000 size = 2764800 [ 4.085735] [drm:mtk_drm_gem_create] cookie = ffffff800e447000 dma_addr = 0x00000000fb800000 size = 5760000 [ 4.088630] @@@ dual 0 second link enable 0 ub941_enable [ 4.089228] [drm:mtk_drm_gem_create] cookie = ffffff800e9cb000 dma_addr = 0x00000000fa800000 size = 5760000 [ 4.091367] ti,ub941 0-001a: clear irq, reg C7 = 0x65 [ 4.092306] ---read id 52 [ 4.092665] [drm:mtk_drm_gem_create] cookie = ffffff800ef4f000 dma_addr = 0x00000000fa000000 size = 5760000 [ 4.095297] i2c 0-002c: ub948 probe------- addr 0x2c [ 4.101450] EXT4-fs (mmcblk0p20): recovery complete [ 4.102228] [ 4. 39401][MTK_RVC][BOOT_PROF]display first frame [ 4.102470] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null) [ 4.102524] init: [libfs_mgr]__mount(source=/dev/block/platform/11230000.mmc/by-name/mtkdata,target=/mnt/mtkdata,type=ext4)=0: Success [ 4.104235] i2c 0-002c: cannot get odd-even-flag ret=-22, default(0) [ 4.105901] init: [libfs_mgr]Returning avb_handle with status: 0 [ 4.111493] init: [libfs_mgr]Loading verity table: '1 /dev/block/platform/11230000.mmc/by-name/vendor_a /dev/block/platform/11230000.mmc/by-name/vendor_a 4096 4096 125961 125961 sha1 90b8b9f1061ee7f7eadbb3a8ad90a177c23a673a 661cb19b24909adfbd974a7041eba4a547aae6cfaa40aa90246a60e34ee2865d 10 use_fec_from_device /dev/block/platform/11230000.mmc/by-name/vendor_a fec_roots 2 fec_blocks 126955 fec_start 126955 restart_on_corruption ignore_zero_blocks' [ 4.135306] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.136333] init: [libfs_mgr]__mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0: Success [ 4.137626] init: Skipped setting INIT_AVB_VERSION (not in recovery mode) [ 4.154549] SELinux: 8192 avtab hash slots, 24855 rules. [ 4.162915] SELinux: 8192 avtab hash slots, 24855 rules. [ 4.163600] SELinux: 1 users, 4 roles, 1721 types, 0 bools, 1 sens, 1024 cats [ 4.164546] SELinux: 93 classes, 24855 rules [ 4.167004] SELinux: Completing initialization. [ 4.167621] SELinux: Setting up existing superblocks. [ 4.243172] audit: type=1403 audit(1546303903.736:2): policy loaded auid=4294967295 ses=4294967295 [ 4.244969] audit: type=1404 audit(1546303903.736:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 4.268635] init: 3 output lines suppressed due to ratelimiting [ 4.271619] init: init second stage started! [ 4.283904] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 4.288355] selinux: SELinux: Loaded file_contexts\x0a [ 4.289196] init: Running restorecon... [ 4.302936] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory [ 4.307520] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0 [ 4.309218] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1548 [ 4.310599] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 1549 [ 4.311673] init: Parsing file /init.rc... [ 4.313581] init: Added '/init.environ.rc' to import list [ 4.404983] ueventd: ueventd started! [ 4.410472] selinux: SELinux: Loaded file_contexts\x0a [ 4.411555] ueventd: Parsing file /ueventd.rc... [ 4.414434] ueventd: Parsing file /vendor/ueventd.rc... [ 4.416050] ueventd: Parsing file /odm/ueventd.rc... [ 4.416778] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 4.418295] ueventd: Parsing file /ueventd.mt2712.rc... [ 4.419065] ueventd: Unable to read config file '/ueventd.mt2712.rc': open() failed: No such file or directory [ 4.422202] ueventd: [libfs_mgr]Warning: unknown flag resize [ 4.424074] ueventd: [libfs_mgr]dt_fstab: Using a specified mount point /mnt/mtkdata for mtkdata [ 4.692911] Registered swp emulation handler [ 4.718127] init: wait for '/dev/' took 0ms [ 4.718799] init: wait for '/dev/block' took 0ms [ 4.719473] init: wait for '/dev/block/platform/' took 0ms [ 4.720364] init: wait for '/dev/block/platform/11230000.mmc/' took 0ms [ 4.721329] init: wait for '/dev/block/platform/11230000.mmc/by-name/userdata' took 0ms [ 4.728503] EXT4-fs (mmcblk0p25): Ignoring removed nomblk_io_submit option [ 4.831694] EXT4-fs (mmcblk0p25): recovery complete [ 4.832745] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 4.886193] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 4.890181] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [0] [ 4.892072] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 4.893328] ub954 1-0030: width/height 1280/960 not support. Set 1280/720 as default [ 4.894418] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 4.903414] mtk_vcu vcu@1: [VCU] vcu_ipi_send: VCU is not running [ 4.904249] [MTK_MDP] level=0 mtk_mdp_vpu_send_msg(),185: init vpu failed -1, use fast-rvc flow\x0a [ 4.906184] mtk-mdp 14001000.rdma: Out of scaler range [ 4.907238] mtk-mdp 14001000.rdma: Out of scaler range [ 5.202552] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a [ 5.203401] e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a [ 5.204325] e2fsck: Pass 2: Checking directory structure\x0a [ 5.205182] e2fsck: Pass 3: Checking directory connectivity\x0a [ 5.206071] e2fsck: Pass 4: Checking reference counts\x0a [ 5.206930] e2fsck: Pass 5: Checking group summary information\x0a [ 5.207881] e2fsck: data: 3828/1449984 files (12.1% non-contiguous), 713199/5790000 blocks\x0a [ 5.217188] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: (null) [ 5.221011] EXT4-fs (mmcblk0p26): Ignoring removed nomblk_io_submit option [ 5.229986] EXT4-fs (mmcblk0p26): recovery complete [ 5.231026] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 5.248539] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 5.249553] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [1] [ 5.258935] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 5.260083] ub954 1-0030: width/height 1280/960 not support. Set 1280/720 as default [ 5.262303] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 5.269598] mtk_vcu vcu@1: [VCU] vcu_ipi_send: VCU is not running [ 5.270390] [MTK_MDP] level=0 mtk_mdp_vpu_send_msg(),185: init vpu failed -1, use fast-rvc flow\x0a [ 5.271867] mtk-mdp 14001000.rdma: Out of scaler range [ 5.272527] mtk-mdp 14001000.rdma: Out of scaler range [ 5.303108] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a [ 5.304009] e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a [ 5.306141] e2fsck: Pass 2: Checking directory structure\x0a [ 5.310201] EXT4-fs (mmcblk0p26): Ignoring removed nomblk_io_submit option [ 5.316889] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,noauto_da_alloc,errors=panic [ 5.319607] init: 4 output lines suppressed due to ratelimiting [ 5.399523] [open the driver!!] [ 5.400058] [exit open the driver] [ 5.400526] ipcl vip request [ 5.415996] logd.auditd: start [ 5.416405] logd.klogd: 5353667614 [ 5.443217] logd: logdr: UID=0 GID=2000 PID=2152 b tail=0 logMask=19 pid=0 start=0ns timeout=0ns [ 5.471905] [MTK_VCU][vcu_init_ipi_handler, 673] VPUD is running, fw version: 0.2.14 [ 5.500098] update_verifier: Started with arg 1: nonencrypted [ 5.523531] [MTK_VCU][vcu_init_ipi_handler, 676] MDPD is running, fw version: 0.2.13 [ 5.571985] type=1400 audit(1546303905.064:4): avc: denied { read } for pid=2167 comm="android.hardwar" name="compatible" dev="sysfs" ino=3709 scontext=u:r:hal_bootctl_default:s0 tcontext=u:object_r:sysfs_dt_firmware_android:s0 tclass=file permissive=0 [ 5.581336] hang_detect: aee enable system_server coredump. [ 5.582608] update_verifier: Booting slot 0: isSlotMarkedSuccessful=0 [ 5.585839] update_verifier: Failed to open /data/ota_package/care_map.txt: No such file or directory [ 5.590890] update_verifier: Marked slot 0 as booted successfully. [ 5.591766] update_verifier: Leaving update_verifier. [ 5.638447] type=1400 audit(1546303905.064:4): avc: denied { read } for pid=2167 comm="android.hardwar" name="compatible" dev="sysfs" ino=3709 scontext=u:r:hal_bootctl_default:s0 tcontext=u:object_r:sysfs_dt_firmware_android:s0 tclass=file permissive=0 [ 5.641453] type=1400 audit(1546303905.128:5): avc: denied { dac_override } for pid=2156 comm="aee_aed" capability=1 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 5.644283] type=1400 audit(1546303905.128:5): avc: denied { dac_override } for pid=2156 comm="aee_aed" capability=1 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 5.647218] type=1400 audit(1546303905.128:6): avc: denied { dac_read_search } for pid=2156 comm="aee_aed" capability=2 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 5.786373] vdc: Waited 0ms for vold [ 5.986889] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null) [ 6.003286] type=1400 audit(1546303905.128:6): avc: denied { dac_read_search } for pid=2156 comm="aee_aed" capability=2 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 6.013547] type=1400 audit(1546303905.496:7): avc: denied { setattr } for pid=1548 comm="init" name="wifi" dev="mmcblk0p25" ino=524311 scontext=u:r:vendor_init:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir permissive=0 [ 6.022659] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64 [ 6.022662] audit: rate limit exceeded [ 6.432881] Gt9xx driver installing.. [ 6.521448] mtk-pcie 11700000.pcie: Port0 link down [ 6.522276] mtk-pcie 11700000.pcie: PCI host bridge to bus 0000:00 [ 6.523177] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 6.524033] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] [ 6.524949] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.526597] backlight_lcd0 supply power not found, using dummy regulator [ 6.526613] mtk-sdio 11260000.msdc3_sdio: Got Src Clock Mux [ 6.526628] mtk-sdio 11260000.msdc3_sdio: Got Src Clock PLL [ 6.526635] mtk-sdio 11260000.msdc3_sdio: Got PLL Frequency:195000000 [ 6.531957] [I]mtk_wcn_cmb_sdio_request_eirq:enter [ 6.533366] [I]mtk_wcn_cmb_sdio_request_eirq:exit [ 6.550902] mtk-sdio 11260000.msdc3_sdio: sclk: 399590, timing: 0 hz:400000 cfg:0x2007a9b [ 6.570828] msdc_drv_probe: add new sdio_host mmc1, index=1, ret=0 [ 6.571791] mtk-sdio 11260000.msdc3_sdio: /proc/sdio is created. [ 6.572650] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 6.576661] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 6.579225] backlight_lcd0 supply power not found, using dummy regulator [ 6.582796] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 6.584577] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.586229] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.587997] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.589756] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.591532] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.593248] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.594929] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.596680] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.598374] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 6.599794] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 6.618947] mtk-sdio 11260000.msdc3_sdio: sclk: 299079, timing: 0 hz:300000 cfg:0x200a39b [ 6.639326] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 6.641371] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 6.647040] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 6.649077] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.650917] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.652732] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.654558] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.656451] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.656504] @@cyttsp6 irq rc = 0 [ 6.658202] reset return 0 [ 6.658770] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.660651] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.662503] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.664450] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 6.665810] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 6.683387] [ 6.683781] ********************************************************** [ 6.684719] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 6.685552] ** ** [ 6.686941] mtk-sdio 11260000.msdc3_sdio: sclk: 199795, timing: 0 hz:200000 cfg:0x200f49b [ 6.690252] ** trace_printk() being used. Allocating extra memory. ** [ 6.691130] ** ** [ 6.691950] ** This means that this is a DEBUG kernel and it is ** [ 6.692820] ** unsafe for production use. ** [ 6.693641] ** ** [ 6.694461] ** If you see this message and you are not debugging ** [ 6.695316] ** the kernel, report this immediately to your vendor! ** [ 6.696136] ** ** [ 6.696956] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 6.697776] ********************************************************** [ 6.707567] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 6.709697] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 6.716170] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 6.722022] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.724196] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.725896] [WMT-DETECT][I]wmt_detect_driver_init:driver(major 154) installed success [ 6.726329] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.728755] [SDIO-DETECT][I]sdio_detect_init:sdio_register_driver() ret=0 [ 6.728818] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.731965] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.732848] [WMT-DETECT][E]wmt_detect_probe(255):platform name: connectivity-combo@0 [ 6.734142] wmt_gpio: gpio init start! [ 6.734145] wmt_gpio:set GPIO_COMBO_URXD_PIN to GPIO_PULL_DIS fail, is NULL! [ 6.734174] wmt_gpio:set GPIO_COMBO_UTXD_PIN to GPIO_PULL_DIS done! [ 6.734188] wmt_gpio:set GPIO_COMBO_PMU_EN_PIN to GPIO_PULL_DIS done! [ 6.734203] wmt_gpio:set GPIO_COMBO_PMU_EN_PIN out to 0: 0! [ 6.734212] wmt_gpio:set GPIO_COMBO_RST_PIN to GPIO_PULL_DIS done! [ 6.734218] wmt_gpio:set GPIO_COMBO_RST_PIN out to 0: 0! [ 6.734226] wmt_gpio:set GPIO_WIFI_EINT_PIN to GPIO_IN_PULLUP done! [ 6.734234] wmt_gpio:set GPIO_PCM_DAICLK_PIN to GPIO_PULL_DIS done! [ 6.734241] wmt_gpio:set GPIO_PCM_DAIPCMIN_PIN to GPIO_PULL_DIS done! [ 6.734248] wmt_gpio:set GPIO_PCM_DAIPCMOUT_PIN to GPIO_PULL_DIS done! [ 6.734255] wmt_gpio:set GPIO_PCM_DAISYNC_PIN to GPIO_PULL_DIS done! [ 6.734257] wmt_gpio:it may not be 6632 project, GPIO_CHIP_DEEP_SLEEP_PIN no need config! [ 6.734259] wmt_gpio:it may not be 6632 project, GPIO_CHIP_WAKE_UP_PIN no need config! [ 6.734261] wmt_gpio: gpio init done! ret(0) [ 6.736163] backlight_lcd0 supply power not found, using dummy regulator [ 6.747662] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.749866] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.751974] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.754106] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 6.755506] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 6.763106] cyttsp6_i2c_adapter 0-0024: cyttsp6_xres: RESET CYTTSP gpio=-2 r=0 [ 6.774951] mtk-sdio 11260000.msdc3_sdio: sclk: 190429, timing: 0 hz:191176 cfg:0x201009b [ 6.795614] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 6.797795] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 6.804846] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 6.807020] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.809195] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.811337] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.813464] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 6.815604] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.817766] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.819968] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.822130] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 6.824348] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 6.825718] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 6.838236] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 6.842499] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 6.842536] ub954 1-0030: width/height 1280/960 not support. Set 1280/720 as default [ 6.842539] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 6.877045] healthd: BatteryTechnologyPath not found [ 6.877052] healthd: BatteryCycleCountPath not found [ 6.892292] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed [ 6.893929] healthd: battery none chg=a [ 6.898216] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [2] [ 6.913330] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: PANEL TEST Status=0 codel=1A [ 6.913336] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: SCANNING is ENABLED codel=1A [ 6.916416] watchdogd: watchdogd started (interval 20, margin 10)! [ 6.916456] [WDK]: kick Ex WDT [ 6.916465] [WDK]: kick Ex WDT [ 6.916467] [WDK]: kick Ex WDT [ 6.916471] [WDK]: kick Ex WDT [ 6.925234] [tuning] mtk_mdp_vpu_handle_tuning_ack[237] map va[0xffffffc0b3c00188] pa[0xf3c00188] [ 6.925376] mtk-mdp 14001000.rdma: Out of scaler range [ 6.925382] mtk-mdp 14001000.rdma: Out of scaler range [ 6.940805] cyttsp6_i2c_adapter 0-0024: TTSP Protocol Version is 2.7 [ 6.994035] [MTK_V4L2] level=0 fops_vcodec_release(),196: [2] decoder [ 6.998044] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 0 [ 7.000208] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 7.005759] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [2] [ 7.025098] [WMT-DETECT][I]wmt_detect_open:open major 154 minor 0 (pid 2396) [ 7.026159] [WMT-DETECT][I]wmt_detect_open:WMT platform detect probed! [ 7.029769] cyttsp6_i2c_adapter 0-0024: cyttsp6_startup_: cyttsp6_exit startup rc=0... [ 7.030244] input: cyttsp4_mt as /devices/platform/11007000.i2c/i2c-0/0-0024/input/input2 [ 7.031599] cyttsp6_i2c_adapter 0-0024: cyttsp6_setup_input_device: Initialize event signals [ 7.031832] input: cyttsp6_btn as /devices/platform/11007000.i2c/i2c-0/0-0024/input/input3 [ 7.033442] cyttsp6_device_access_init: Registering device access module for core_id: cyttsp6_core0 [ 7.033545] cyttsp6_device_access_init: Cypress TTSP Device Access Driver (Built TTDA.02.05.776586) rc=0 [ 7.033549] cyttsp6_loader_init: Registering loader module for core_id: cyttsp6_core0 [ 7.033588] cyttsp6_i2c_adapter 0-0024: cyttsp6_loader_probe: Successful probe 0-0024 [ 7.033592] cyttsp6_loader_init: Cypress TTSP FW Loader Driver (Built TTDA.02.05.776586) rc=0 [ 7.034668] backlight_lcd0 supply power not found, using dummy regulator [ 7.039992] _cyttsp6_core_sleep_: sleep state rc 0 [ 7.056341] cyttsp6_i2c_adapter 0-0024: Direct firmware load for cyttsp6_fw.bin failed with error -2 [ 7.056346] cyttsp6_i2c_adapter 0-0024: Falling back to user helper [ 7.078180] cyttsp6_i2c_adapter 0-0024: _cyttsp6_firmware_cont_builtin: No builtin firmware [ 7.087047] file system registered [ 7.105847] Mass Storage Function, version: 2009/09/11 [ 7.106943] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191034),arg(92) [ 7.106947] [WMT-DETECT][I]wmt_detect_ext_chip_pwr_on:++ [ 7.106950] [WMT-DETECT][D]wmt_detect_dump_pin_conf:[WMT-DETECT]=>dump wmt pin configuration start<= [ 7.106954] [WMT-DETECT][I]wmt_detect_dump_pin_conf:LDO(GPIO-1), PMU(GPIO451), PMUV28(GPIO-1) [ 7.106958] [WMT-DETECT][I]wmt_detect_dump_pin_conf:RST(GPIO450), BGF_EINT(GPIO-1) [ 7.106966] [WMT-DETECT][I]wmt_detect_dump_pin_conf:WIFI_EINT(GPIO453), WIFI_EINT_NUM(164) [ 7.106968] [WMT-DETECT][D]wmt_detect_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration ends<= [ 7.106971] wmt_gpio:set GPIO_COMBO_URXD_PIN to GPIO_PULL_DIS fail, is NULL! [ 7.106973] [WMT-DETECT][D]wmt_detect_chip_pwr_on:WMT-DETECT: GPIO_COMBO_URXD_PIN out 0 [ 7.107007] [WMT-DETECT][I]wmt_detect_chip_pwr_on:wmt_gpio:set GPIO_COMBO_PMU_EN_PIN to GPIO_PULL_DIS done! [ 7.107022] [WMT-DETECT][I]wmt_detect_output_low:WMT-DETECT: set GPIO171 to output 0 [ 7.107032] [WMT-DETECT][I]wmt_detect_chip_pwr_on:wmt_gpio:set GPIO_COMBO_RST_PIN to GPIO_PULL_DIS done! [ 7.107039] [WMT-DETECT][I]wmt_detect_output_low:WMT-DETECT: set GPIO170 to output 0 [ 7.134900] LUN: removable file: (no medium) [ 7.181101] @@@ pixclock 47500000 [ 7.181916] @@@ pixclock 47500000 [ 7.184806] @@@ pixclock 47500000 [ 7.186580] [drm:mtk_drm_crtc_enable] mtk_drm_crtc_enable 57 [ 7.187406] [drm:mtk_drm_crtc_enable] mtk_crtc_ddp_hw_init [ 7.188124] [drm:mtk_drm_crtc_enable] mtk_crtc_ddp_clk_enable [ 7.188870] [drm:mtk_drm_crtc_enable] mediatek_ddp_ddp_path_setup [ 7.192905] mediatek-mt8173-lvds-tx 10215800.lvds-phy: mtk_lvds_tx_power_on_signal [ 7.197110] [drm:mtk_drm_gem_create] cookie = ffffff801780d000 dma_addr = 0x00000000f8400000 size = 4147200 [ 7.232286] audit: audit_lost=21 audit_rate_limit=5 audit_backlog_limit=64 [ 7.233172] audit: rate limit exceeded [ 7.244607] mtu3 112c1000.usb: only usb20 can dual role to none [ 7.246212] mtu3 112c1000.usb: wrong or duplicated setting [ 7.253501] read descriptors [ 7.253908] read strings [ 7.342798] [WMT-DETECT][I]wmt_detect_output_high:WMT-DETECT: set GPIO171 to output 1 [ 7.395269] [WMT-DETECT][I]wmt_detect_output_high:WMT-DETECT: set GPIO170 to output 1 [ 7.434824] mtk_wcn_cmb_sdio_off (1) [ 7.435286] msdc3 -> USR Suspend [ 7.435938] mtk_wcn_cmb_sdio_on (1) [ 7.440949] msdc3 -> USR Resume [ 7.460208] mtk-sdio 11260000.msdc3_sdio: sclk: 399590, timing: 0 hz:400000 cfg:0x2007a9b [ 7.464684] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 7.465582] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [3] [ 7.471248] [MTK_MIPICSI0] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 7.474469] [MTK_MIPICSI1] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 7.478823] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191038),arg(0) [ 7.481154] [WMT-DETECT][I]wmt_detect_ext_chip_detect:++ [ 7.482251] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 7.483893] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 7.489028] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 7.490651] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.492278] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.493853] [MTK_MIPICSI3] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 7.493907] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.495344] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.495759] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.496163] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.496561] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.496982] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.497387] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 7.497567] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 7.506786] [WMT-DETECT][D]wmt_detect_read_gpio_input:WMT-DETECT: get GPIO453 val1 [ 7.506789] [WMT-DETECT][E]wmt_detect_read_ext_cmb_status(267):WMT-DETECT: WIFI_EINT input status:1 [ 7.506792] [WMT-DETECT][I]wmt_detect_ext_chip_detect:external combo chip detected [ 7.514865] mtk-sdio 11260000.msdc3_sdio: sclk: 299079, timing: 0 hz:300000 cfg:0x200a39b [ 7.535590] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 7.536126] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 7.540305] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 7.541962] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.542500] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.543764] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.544556] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.546256] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.546793] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.547939] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.548688] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.549229] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 7.549256] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 7.566887] mtk-sdio 11260000.msdc3_sdio: sclk: 199795, timing: 0 hz:200000 cfg:0x200f49b [ 7.587557] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 7.588351] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 7.593111] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 7.593892] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.594672] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.595467] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.596231] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.597015] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.597775] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.598543] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.599309] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.600094] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 7.600136] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 7.620188] mtk-sdio 11260000.msdc3_sdio: sclk: 190429, timing: 0 hz:191176 cfg:0x201009b [ 7.639579] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=00000C00; host->error=0x00000002 [ 7.640391] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=52 arg=80000C08; host->error=0x00000002 [ 7.645222] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=8 arg=000001AA; host->error=0x00000002 [ 7.646030] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.646823] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.647629] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.648430] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=5 arg=00000000; host->error=0x00000002 [ 7.649249] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.650069] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.653146] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.653962] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=55 arg=00000000; host->error=0x00000002 [ 7.654781] mtk-sdio 11260000.msdc3_sdio: msdc_track_cmd_data: cmd=1 arg=00000000; host->error=0x00000002 [ 7.654927] mtk-sdio 11260000.msdc3_sdio: set mclk to 0 [ 7.716764] mtu3 112c1000.usb: gadget (high-speed) pullup D+ [ 7.763815] [drm:mtk_color_set_pqparam] *ERROR* mtk_color_set_pqparam : Color id range error! [ 7.763940] [drm:mtk_color_set_pqparam] *ERROR* mtk_color_set_pqparam : Color id range error! [ 7.883182] mtu3 112c1000.usb: only usb20 can dual role to device [ 7.883237] android_work: did not send uevent (0 0 (null)) [ 7.968019] android_work: sent uevent USB_STATE=CONNECTED [ 7.996980] capability: warning: `main' uses 32-bit capabilities (legacy support in use) [ 8.009398] configfs-gadget gadget: high-speed config #1: b [ 8.009606] android_work: sent uevent USB_STATE=CONFIGURED [ 8.127961] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 8.463675] random: crng init done [ 8.678789] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 8.679874] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [3] [ 8.680864] [MTK_V4L2] level=0 fops_vcodec_release(),196: [3] decoder [ 8.681910] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 0 [ 8.682900] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 8.683957] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [4] [ 9.040939] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 9.043584] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [4] [ 9.044740] [MTK_V4L2] level=0 fops_vcodec_release(),196: [4] decoder [ 9.046823] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 0 [ 9.048462] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 9.049354] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [5] [ 9.051327] [MTK_MIPICSI0] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 9.052515] [MTK_MIPICSI1] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 9.055937] [MTK_MIPICSI3] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 720/480/691200 [ 9.057217] [MTK_MIPICSI4] L0 mtk_mipicsi_set_fmt 516: width/height/sizeimage 1280/720/1843200 [ 9.852793] audit: audit_lost=32 audit_rate_limit=5 audit_backlog_limit=64 [ 9.853679] audit: rate limit exceeded [ 10.626786] [WMT-DETECT][I]wmt_detect_ext_chip_detect:invalid external combo chip id (0xffffffff) [ 10.627991] [WMT-DETECT][I]wmt_detect_ext_chip_detect:-- [ 10.628806] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191040),arg(0) [ 10.630810] query current consys chipid (0xffffffff) [ 10.644469] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191032),arg(4294967295) [ 10.645583] [SDIO-DETECT][I]sdio_detect_do_autok:MTK_HIF_SDIO_AUTOK_ENABLED is not defined [ 10.647018] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (-2147191033),arg(5) [ 10.647971] [WMT-DETECT][I]wmt_detect_ext_chip_pwr_off:-- [ 10.648901] mtk_wcn_cmb_sdio_off (1) [ 10.649425] msdc3 -> USR Suspend [ 10.650691] [WMT-DETECT][I]wmt_detect_output_low:WMT-DETECT: set GPIO170 to output 0 [ 10.651854] [WMT-DETECT][I]wmt_detect_output_low:WMT-DETECT: set GPIO171 to output 0 [ 10.925819] audit: audit_lost=41 audit_rate_limit=5 audit_backlog_limit=64 [ 10.926789] audit: rate limit exceeded [ 11.153143] [WMT-DETECT][I]wmt_detect_unlocked_ioctl:cmd (1074034433),arg(4294967295) [ 11.154310] set current consys chipid (0xffffffff) [ 11.155774] [WMT-DETECT][I]wmt_detect_close:close major 154 minor 0 (pid 2396) [ 11.157464] init: Service 'wmt_loader' (pid 2396) exited with status 255 [ 11.931035] audit: audit_lost=48 audit_rate_limit=5 audit_backlog_limit=64 [ 11.931948] audit: rate limit exceeded [ 12.004482] als_store_active buf=0 [ 12.013613] healthd: battery none chg=a [ 12.015493] healthd: battery none chg=a [ 12.045442] healthd: battery none chg=a [ 12.223904] selinux: avc: denied { set } for property=vendor.fastrvc.running pid=1417 uid=0 gid=0 scontext=u:r:initfastrvc:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=0\x0a [ 12.226859] init: Unable to set property 'vendor.fastrvc.running' to '1' from uid:0 gid:0 pid:1417: SELinux permission check failed [ 12.231532] init: Untracked pid 1417 exited with status 0 [ 12.263542] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/init.rc:753) [ 12.303212] gpio-304 (?): _gpiod_direction_output_raw: tried to set a GPIO tied to an IRQ as output [ 12.304757] cyttsp6_i2c_adapter 0-0024: cyttsp6_wakeup: Fail set output gpio=304 [ 12.305722] cyttsp6_i2c_adapter 0-0024: cyttsp6_wakeup: WAKEUP CYTTSP gpio=304 r=-5 [ 12.827180] cyttsp6_i2c_adapter 0-0024: _cyttsp6_awake_device_from_deep_sleep: Queueing startup rc = -6 mode = 7 [ 12.828498] _cyttsp6_awake_device_from_deep_sleep: Queueing startup [ 12.829296] cyttsp6_i2c_adapter 0-0024: _cyttsp6_queue_startup: cyttsp6_startup queued [ 12.831004] reset return 0 [ 12.936397] audit: audit_lost=60 audit_rate_limit=5 audit_backlog_limit=64 [ 12.937282] audit: rate limit exceeded [ 12.938796] cyttsp6_i2c_adapter 0-0024: cyttsp6_xres: RESET CYTTSP gpio=-2 r=0 [ 13.090156] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: PANEL TEST Status=0 codel=1A [ 13.091339] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: SCANNING is ENABLED codel=1A [ 13.119727] cyttsp6_i2c_adapter 0-0024: TTSP Protocol Version is 2.7 [ 13.207392] cyttsp6_i2c_adapter 0-0024: cyttsp6_startup_: cyttsp6_exit startup rc=0... [ 13.236286] _cyttsp6_core_sleep_: sleep state rc 0 [ 13.262821] gpio-304 (?): _gpiod_direction_output_raw: tried to set a GPIO tied to an IRQ as output [ 13.265223] cyttsp6_i2c_adapter 0-0024: cyttsp6_wakeup: Fail set output gpio=304 [ 13.266159] cyttsp6_i2c_adapter 0-0024: cyttsp6_wakeup: WAKEUP CYTTSP gpio=304 r=-5 [ 13.737593] acc_open [ 13.737890] acc_release [ 13.787055] cyttsp6_i2c_adapter 0-0024: _cyttsp6_awake_device_from_deep_sleep: Queueing startup rc = -6 mode = 0 [ 13.788861] _cyttsp6_awake_device_from_deep_sleep: Queueing startup [ 13.789799] cyttsp6_i2c_adapter 0-0024: _cyttsp6_queue_startup: cyttsp6_startup queued [ 13.791755] reset return 0 [ 13.898797] cyttsp6_i2c_adapter 0-0024: cyttsp6_xres: RESET CYTTSP gpio=-2 r=0 [ 13.900997] TI DP83TC811 PHY initialized in Master and Autonomous mode [ 13.902665] ==================== TI DP83TC811 ===================== [ 13.903875] 0x0000: 2100 [ 13.904367] 0x0001: 0061 [ 13.904885] 0x0002: 2000 [ 13.905377] 0x0003: a253 [ 13.906137] 0x0009: 2000 [ 13.906630] 0x0011: 010b [ 13.907187] 0x0012: 4000 [ 13.907678] 0x0013: 4200 [ 13.908126] 0x0014: 0000 [ 13.908673] 0x0015: 0000 [ 13.909184] 0x0016: 0100 [ 13.910106] 0x0017: 4241 [ 13.911021] 0x0018: 1010 [ 13.912052] 0x001b: 007d [ 13.912630] 0x001c: 05ee [ 13.913458] 0x001e: 0000 [ 13.914007] 0x001f: 0000 [ 13.914448] ------------------------------------------------------- [ 13.921796] 0x0133: 05e0 [ 13.923168] 0x016b: 0000 [ 13.925121] 0x0180: 0000 [ 13.925944] 0x0181: 0000 [ 13.927806] 0x018a: 0000 [ 13.928715] 0x018b: 005a [ 13.931139] 0x018c: 0000 [ 13.932086] 0x0197: 0058 [ 13.932906] 0x0198: 0000 [ 13.933717] 0x0400: 1000 [ 13.934622] 0x0401: 000a [ 13.935436] 0x0446: 0077 [ 13.937816] 0x0448: 0000 [ 13.938784] 0x0460: 2610 [ 13.939766] 0x0461: 0410 [ 13.940616] 0x0462: 0000 [ 13.941535] 0x0463: 0001 [ 13.941608] audit: audit_lost=67 audit_rate_limit=5 audit_backlog_limit=64 [ 13.941611] audit: rate limit exceeded [ 13.943916] 0x0467: f00c [ 13.945784] 0x0469: 0004 [ 13.947267] 0x0475: 0000 [ 13.948119] 0x0480: 0002 [ 13.948963] 0x0481: 00a2 [ 13.949820] 0x0482: 7007 [ 13.950662] 0x0483: 0003 [ 13.951539] 0x0484: 1220 [ 13.952383] 0x0485: 1078 [ 13.953226] 0x0486: 0a05 [ 13.954077] 0x0487: 0a00 [ 13.955180] 0x0489: 0001 [ 13.956034] 0x0493: 0014 [ 13.956875] 0x0496: 044c [ 13.957922] 0x0497: 01c0 [ 13.958800] 0x04a0: 00a1 [ 13.959648] 0x04a1: 0000 [ 13.960490] 0x04a2: 0000 [ 13.961331] 0x04a3: 0000 [ 13.962175] 0x04a4: 0000 [ 13.963457] 0x04a5: 0000 [ 13.964310] 0x04a6: 0000 [ 13.965150] 0x04a7: 0000 [ 13.965986] 0x04a8: 0000 [ 13.966914] 0x04a9: 0000 [ 13.968668] 0x04aa: 0000 [ 13.969515] 0x04ab: 0000 [ 13.970352] 0x04ac: 0000 [ 13.971292] 0x04ad: 0000 [ 13.972145] 0x04ae: 0000 [ 13.972983] 0x04af: 0000 [ 13.973875] 0x04b0: 0000 [ 13.974781] 0x04b1: 0000 [ 13.975735] 0x04b2: 0000 [ 13.976559] 0x04b3: 0000 [ 13.977378] 0x04b4: 0000 [ 13.978294] 0x04b5: 0000 [ 13.979262] 0x04b6: 0000 [ 13.980089] 0x04b7: 0000 [ 13.980929] 0x04b8: 0000 [ 13.981751] 0x04b9: 0000 [ 13.982697] 0x04ba: 0000 [ 13.984318] 0x04bb: 0000 [ 13.985210] 0x04bc: 0000 [ 13.986582] 0x04bd: 0000 [ 13.987457] 0x04be: 0000 [ 13.988341] 0x04bf: 0000 [ 13.989265] 0x04c0: 0000 [ 13.990103] 0x04c1: 0000 [ 13.990894] 0x04c2: 0000 [ 13.991715] 0x04c3: 0000 [ 13.993038] 0x04c4: 0000 [ 13.994909] 0x04c5: 0000 [ 13.995763] 0x04c6: 0000 [ 13.996592] 0x04c7: 0000 [ 13.998478] 0x04c8: 0000 [ 13.999366] 0x04c9: 0000 [ 14.000231] 0x04ca: 0000 [ 14.001072] 0x04cb: 0000 [ 14.001901] 0x04cc: 000c [ 14.002790] 0x04e0: 0000 [ 14.003682] 0x04e5: 00c3 [ 14.004507] 0x0007: 2001 [ 14.005330] 0x000b: 1000 [ 14.006159] 0x0012: 4000 [ 14.007215] 0x0834: c000 [ 14.008116] 0x0836: 0000 [ 14.008534] ======================================================= [ 14.010601] TI DP83TC811 stmmac-0:01: attached PHY driver [TI DP83TC811] (mii_bus:phy_addr=stmmac-0:01, irq=-1) [ 14.023045] dwmac4: Master AXI performs any burst length [ 14.023774] dwmac-mediatek 1101c000.eth eth0: No Safety Features support found [ 14.024785] dwmac-mediatek 1101c000.eth eth0: IEEE 1588-2008 Advanced Timestamp supported [ 14.026848] dwmac-mediatek 1101c000.eth eth0: registered PTP clock [ 14.028175] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.049510] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: PANEL TEST Status=0 codel=1A [ 14.051201] cyttsp6_i2c_adapter 0-0024: cyttsp6_si_get_test_data_: SCANNING is ENABLED codel=1A [ 14.068685] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.080582] cyttsp6_i2c_adapter 0-0024: TTSP Protocol Version is 2.7 [ 14.139907] init: processing action (sys.sysctl.tcp_def_init_rwnd=*) from (/init.rc:757) [ 14.170813] cyttsp6_i2c_adapter 0-0024: cyttsp6_startup_: cyttsp6_exit startup rc=0... [ 14.273934] sdcardfs version 2.0 [ 14.274372] sdcardfs: dev_name -> /data/media [ 14.275072] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015 [ 14.276409] sdcardfs: mnt -> ffffffc09373f520 [ 14.277060] sdcardfs: mounted on top of /data/media type ext4 [ 14.279510] Remount options were mask=23,gid=9997 for vfsmnt ffffffc079c723a0. [ 14.280965] sdcardfs : options - debug:1 [ 14.281480] sdcardfs : options - gid:9997 [ 14.281997] sdcardfs : options - mask:23 [ 14.286655] Remount options were mask=7,gid=9997 for vfsmnt ffffffc09084afe0. [ 14.287664] sdcardfs : options - debug:1 [ 14.288176] sdcardfs : options - gid:9997 [ 14.288746] sdcardfs : options - mask:7 [ 14.752316] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 14.753230] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [5] [ 14.766907] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 14.815525] [MTK_V4L2] level=0 fops_vcodec_release(),196: [5] decoder [ 14.816529] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 14.842494] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 14.845431] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [6] [ 14.855250] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 14.875667] [MTK_V4L2] level=0 fops_vcodec_release(),196: [6] decoder [ 14.876703] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 14.914176] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 14.915152] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [7] [ 14.918723] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 14.946586] audit: audit_lost=80 audit_rate_limit=5 audit_backlog_limit=64 [ 14.947518] audit: rate limit exceeded [ 14.981432] [MTK_V4L2] level=0 fops_vcodec_release(),196: [7] decoder [ 14.982447] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 15.057577] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.058491] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [8] [ 15.062074] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 15.124053] [MTK_V4L2] level=0 fops_vcodec_release(),196: [8] decoder [ 15.125127] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 15.136388] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.138332] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [9] [ 15.142000] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 15.189381] [MTK_V4L2] level=0 fops_vcodec_release(),196: [9] decoder [ 15.190426] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 15.211639] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.212596] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [10] [ 15.229753] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 15.255483] [MTK_V4L2] level=0 fops_vcodec_release(),196: [10] decoder [ 15.256537] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 15.299580] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.300494] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [11] [ 15.304238] [MTK_V4L2] level=0 vidioc_try_fmt(),1286: before resize width=64, height=64, after resize width=64, height=64, sizeimage=4096 [ 15.357904] [MTK_V4L2] level=0 fops_vcodec_release(),196: [11] decoder [ 15.359995] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 1 [ 15.389381] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.390294] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [12] [ 15.397770] [MTK_V4L2] level=0 fops_vcodec_release(),196: [12] decoder [ 15.398624] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 0 [ 15.400073] [MTK_V4L2] level=0 fops_vcodec_open(),185: encoder capability 0 [ 15.400971] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [6] [ 15.407790] [MTK_V4L2] level=0 vidioc_try_fmt(),410: w/h (176, 144) -> (176,144), sizeimage[43648,0,0] [ 15.428116] [MTK_V4L2] level=0 fops_vcodec_open(),166: decoder capability 10 [ 15.429148] [MTK_V4L2] level=0 fops_vcodec_open(),173: 16000000.codec decoder [13] [ 15.430172] [MTK_V4L2] level=0 fops_vcodec_release(),196: [13] decoder [ 15.431075] [MTK_V4L2] level=0 mtk_vcodec_dec_release(),991: 0 [ 15.432004] [MTK_V4L2] level=0 fops_vcodec_open(),195: 18004000.codec encoder [7] [ 16.030511] logd: logdr: UID=1002 GID=1002 PID=3105 n tail=50 logMask=8 pid=2800 start=0ns timeout=0ns [ 16.039808] logd: logdr: UID=1002 GID=1002 PID=3105 n tail=50 logMask=1 pid=2800 start=0ns timeout=0ns [ 16.050258] FAT-fs (sda4): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 16.054636] audit: audit_lost=101 audit_rate_limit=5 audit_backlog_limit=64 [ 16.055627] audit: rate limit exceeded [ 16.074063] init: Service 'bootanim' (pid 2603) exited with status 0 [ 16.112840] sdcardfs version 2.0 [ 16.113683] sdcardfs: dev_name -> /mnt/media_rw/A603-2A67 [ 16.114500] sdcardfs: options -> fsuid=1023,fsgid=1023,mask=6,userid=0,gid=1015 [ 16.115449] sdcardfs: mnt -> ffffffc079f8e560 [ 16.116099] sdcardfs: mounted on top of /mnt/media_rw/A603-2A67 type vfat [ 16.120423] Remount options were mask=18,gid=9997 for vfsmnt ffffffc079f8fde0. [ 16.122721] sdcardfs : options - debug:1 [ 16.123288] sdcardfs : options - gid:9997 [ 16.124317] sdcardfs : options - mask:18 [ 16.125612] Remount options were mask=18,gid=9997 for vfsmnt ffffffc09084bc20. [ 16.126549] sdcardfs : options - debug:1 [ 16.127137] sdcardfs : options - gid:9997 [ 16.127655] sdcardfs : options - mask:18 [ 16.771209] init: Received control message 'stop' for 'bootanim' from pid: 2607 (system_server) [ 16.804831] als_store_batch 4,0,250000000,0 [ 16.807003] als_store_active buf=1 [ 16.807559] ALSPS set batch, 200 -> 250 [ 16.808996] init: processing action (sys.boot_completed=1) from (/init.rc:743) [ 16.809017] logd: logdr: UID=1002 GID=1002 PID=3105 n tail=0 logMask=8 pid=2800 start=0ns timeout=0ns [ 16.811849] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/hw/init.mt2712.rc:266) [ 16.814714] init: starting service 'boottime_test'... [ 16.829105] [BOOT_PROF]BOOT_COMPLETED [ 16.843627] logd: logdr: UID=1002 GID=1002 PID=3105 n tail=0 logMask=1 pid=2800 start=0ns timeout=0ns [ 16.866262] init: Init cannot set 'ro.boottime.init.mount_all.default' to '19': Read-only property was already set [ 16.873719] init: Init cannot set 'ro.crypto.state' to 'unsupported': Read-only property was already set [ 16.882639] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)\x0a [ 16.891394] init: Async property child exited with status 0 [ 16.896430] arch_timer_show boot complete time:18272 [ 16.910773] zram0: detected capacity change from 0 to 2147483648 [ 16.914121] init: Service 'boottime_test' (pid 3182) exited with status 0 [ 16.919161] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)\x0a [ 16.927235] zram: Cannot change disksize for initialized device [ 16.943032] aee_dumpstate (3197): /proc/3197/oom_adj is deprecated, please use /proc/3197/oom_score_adj instead. [ 16.980128] mkswap: Swapspace size: 2097148k, UUID=71e2f76b-209b-4ab3-9899-efed1fc10743 [ 16.988675] Adding 2097148k swap on /dev/block/zram0. Priority:-1 extents:1 across:2097148k SS [ 17.031048] configfs-gadget 112c1000.usb: driver function : [iap_ncm] dev_name : [112c1000.usb] [ 17.032168] udc 11271000.usb: driver function : [iap_ncm] dev_name : [11271000.usb] [ 17.033217] using random self ethernet address [ 17.033792] using random host ethernet address [ 17.034493] /media/ywang136/d27b47a8-094d-487e-aa00-cd905310015a/Eh32_Android/kernel-4.9/drivers/usb/gadget/function/f_iap.c iap_alloc [ 17.038184] /media/ywang136/d27b47a8-094d-487e-aa00-cd905310015a/Eh32_Android/kernel-4.9/drivers/usb/gadget/function/f_iap.c iap_bind [ 17.040162] Interface id is:: 0 [ 17.040691] dual speed source/sink: IN/ep1in, OUT/ep1out [ 17.055825] usb0: HOST MAC 4e:5a:cb:33:3f:f0 [ 17.056825] usb0: MAC 12:2c:bc:a5:70:d2 [ 17.058627] Set IAP interface subclass to 0xf0 [ 17.059424] iap_ncm gadget: Multifunction Composite Gadget [ 17.060134] iap_ncm gadget: userspace failed to provide iSerialNumber [ 17.063149] iap_ncm gadget: iap_ncm ready [ 17.084854] audit: audit_lost=119 audit_rate_limit=5 audit_backlog_limit=64 [ 17.085753] audit: rate limit exceeded [ 17.131127] logd: logdr: UID=0 GID=0 PID=3240 n tail=0 logMask=19 pid=0 start=0ns timeout=0ns [ 17.217899] type=1400 audit(1546303915.920:159): avc: denied { open } for pid=2364 comm="composer@2.1-se" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 duplicate messages suppressed [ 17.245057] type=1400 audit(1546303916.708:180): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 17.271223] type=1400 audit(1546303916.744:181): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 17.311027] type=1400 audit(1546303916.764:182): avc: denied { dac_override } for pid=2156 comm="aee_aed" capability=1 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 17.317355] type=1400 audit(1546303916.764:182): avc: denied { dac_override } for pid=2156 comm="aee_aed" capability=1 scontext=u:r:aee_aed:s0 tcontext=u:r:aee_aed:s0 tclass=capability permissive=0 [ 18.113524] audit: audit_lost=148 audit_rate_limit=5 audit_backlog_limit=64 [ 18.114425] audit: rate limit exceeded [ 19.466728] audit: audit_lost=149 audit_rate_limit=5 audit_backlog_limit=64 [ 19.467758] audit: rate limit exceeded [ 20.518158] audit: audit_lost=422 audit_rate_limit=5 audit_backlog_limit=64 [ 20.519084] audit: rate limit exceeded [ 21.529323] audit: audit_lost=1351 audit_rate_limit=5 audit_backlog_limit=64 [ 21.530218] audit: rate limit exceeded [ 21.831564] type=1400 audit(1546303920.184:520): avc: denied { getattr } for pid=3529 comm="lsof" path="/proc/keys" dev="proc" ino=4026532042 scontext=u:r:dumpstate:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0 [ 21.834492] type=1400 audit(1546303921.324:1463): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 22.042791] [MT-HOOK]hook_det_handler:hook process path is /system/xbin/su, pid is 2697\x0a [ 22.044012] [MT-HOOK]hook_det_handler:cancel_delayed_work_sync, sync flag is = true\x0a [ 22.167579] binder: undelivered TRANSACTION_COMPLETE [ 22.169543] binder: undelivered transaction 28102, process died. [ 22.541899] audit: audit_lost=1390 audit_rate_limit=5 audit_backlog_limit=64 [ 22.542869] audit: rate limit exceeded [ 22.945242] type=1400 audit(1546303922.400:1479): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 duplicate messages suppressed [ 22.949714] type=1400 audit(1546303922.432:1480): avc: denied { open } for pid=2364 comm="composer@2.1-se" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 26.916552] [WDK]: kick Ex WDT [ 31.425055] type=1400 audit(1546303922.468:1481): avc: denied { open } for pid=2364 comm="composer@2.1-se" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 31.428323] type=1400 audit(1546303930.916:1495): avc: denied { read } for pid=2894 comm="pool-2-thread-1" name="life_time" dev="sysfs" ino=21087 scontext=u:r:carservice_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0 [ 31.431445] type=1400 audit(1546303930.916:1495): avc: denied { read } for pid=2894 comm="pool-2-thread-1" name="life_time" dev="sysfs" ino=21087 scontext=u:r:carservice_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0 [ 31.434074] type=1400 audit(1546303930.916:1496): avc: denied { read } for pid=2894 comm="pool-2-thread-1" name="pre_eol_info" dev="sysfs" ino=21086 scontext=u:r:carservice_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0 [ 33.653981] type=1400 audit(1546303930.916:1496): avc: denied { read } for pid=2894 comm="pool-2-thread-1" name="pre_eol_info" dev="sysfs" ino=21086 scontext=u:r:carservice_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0 [ 33.656875] type=1400 audit(1546303933.144:1497): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 34.024506] audit: audit_lost=1408 audit_rate_limit=5 audit_backlog_limit=64 [ 34.025415] audit: rate limit exceeded [ 46.916639] [WDK]: kick Ex WDT [ 52.447068] binder: release 2800:3091 transaction 10232 in, still active [ 52.447936] binder: release 2800:3091 transaction 10190 out, still active [ 52.448795] binder: send failed reply for transaction 10232 to 2343:2343 [ 52.449940] binder: 2343:2343 transaction failed 29189/0, size 4-0 line 2956 [ 52.452079] binder: send failed reply for transaction 10190, target dead [ 52.456780] binder: undelivered transaction 28222, process died. [ 54.047917] logd: logdr: UID=1002 GID=1002 PID=3885 n tail=50 logMask=8 pid=3848 start=0ns timeout=0ns [ 54.050692] logd: logdr: UID=1002 GID=1002 PID=3885 n tail=50 logMask=1 pid=3848 start=0ns timeout=0ns [ 54.744865] logd: logdr: UID=1002 GID=1002 PID=3885 n tail=0 logMask=8 pid=3848 start=0ns timeout=0ns [ 54.749049] logd: logdr: UID=1002 GID=1002 PID=3885 n tail=0 logMask=1 pid=3848 start=0ns timeout=0ns [ 54.932131] logd: logdr: UID=0 GID=0 PID=3896 n tail=0 logMask=19 pid=0 start=0ns timeout=0ns [ 55.592333] logd: logdr: UID=0 GID=0 PID=3899 n tail=0 logMask=4 pid=0 start=0ns timeout=0ns [ 55.646001] logd: logdr: UID=0 GID=0 PID=3901 n tail=0 logMask=2 pid=0 start=0ns timeout=0ns [ 56.644468] type=1400 audit(1546303951.984:1507): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 duplicate messages suppressed [ 56.646595] audit: audit_lost=1409 audit_rate_limit=5 audit_backlog_limit=64 [ 56.646597] audit: rate limit exceeded [ 56.649557] type=1400 audit(1546303956.136:1508): avc: denied { read } for pid=3906 comm="ps" name="logd" dev="dm-0" ino=3105 scontext=u:r:dumpstate:s0 tcontext=u:object_r:logd_exec:s0 tclass=file permissive=0 [ 57.039704] init: Received control message 'interface_start' for 'android.hardware.camera.provider@2.4::ICameraProvider/internal/0' from pid: 2147 (/system/bin/hwservicemanager) [ 57.041752] init: Could not find service hosting interface android.hardware.camera.provider@2.4::ICameraProvider/internal/0 [ 57.649583] type=1400 audit(1546303956.136:1515): avc: denied { read } for pid=3906 comm="ps" name="logd" dev="dm-0" ino=3105 scontext=u:r:dumpstate:s0 tcontext=u:object_r:logd_exec:s0 tclass=file permissive=0 duplicate messages suppressed [ 57.678559] audit: audit_lost=2528 audit_rate_limit=5 audit_backlog_limit=64 [ 57.679554] audit: rate limit exceeded [ 58.269743] init: Untracked pid 3885 exited with status 0 [ 58.283401] init: Untracked pid 3887 exited with status 0 [ 66.916724] [WDK]: kick Ex WDT [ 80.583961] type=1400 audit(1546303957.152:2639): avc: denied { search } for pid=3911 comm="lsof" name="com.android.providers.telephony" dev="mmcblk0p25" ino=786441 scontext=u:r:dumpstate:s0 tcontext=u:object_r:radio_data_file:s0 tclass=dir permissive=0 [ 80.587052] type=1400 audit(1546303980.076:2781): avc: denied { open } for pid=2364 comm="HwBinder:2364_2" path="/dev/__properties__/u:object_r:logo_prop:s0" dev="tmpfs" ino=13169 scontext=u:r:hal_graphics_composer_default:s0 tcontext=u:object_r:logo_prop:s0 tclass=file permissive=0 [ 86.916809] [WDK]: kick Ex WDT [ 91.535321] binder: release 3848:3881 transaction 66773 in, still active [ 91.536187] binder: release 3848:3881 transaction 66770 out, still active [ 91.537093] binder: send failed reply for transaction 66773 to 2343:2343 [ 91.538341] binder: 2343:2343 transaction failed 29189/0, size 4-0 line 2956 [ 91.539460] binder: send failed reply for transaction 66770, target dead