• Preliminary Steps
    • Compliance Suite Settings
      • Save Mode: Save only Failed
      • Capture Raw File: Disabled
      • Capture Power Measurement: Disabled
      • VBus and CC Self-Test: Enabled
      • CC Voltage Calibration: Disabled
    • Analyzing Vendor Information File (VIF)...
    • Making debounce values intermediate file...
    • Teledyne LeCroy USB Compliance Suite Version: 7.92 Build 1198
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(1)=22930
    • Argument(2)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #22930
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #22930
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310e
    • BoardID=161
    • BoardRev=6
    • Serial=#22930
    • CVS_Manager_Class::Release()::Number of connected boards: 1
    • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
    • Board_Class::CloseConnection() Successfully for CVS_0 to #22930
    • Board_Class was destroyed
    • CVS_Manager_Class was destroyed
    • VBUS and CC SELF-TEST: Voyager serial number #22930 pass
      • Teledyne LeCroy USB Compliance Suite Version: 7.92 Build 1198
      • Creating Automation Object ...
      • Binding Voyager #0 with Serial #22930
      • Analyzer(0).SetAnalyzerParameters(1, 0)
      • UpdateVariableInFile::2
      • Update Expected_0V_Voltage in file Variables.inc to 30
      • UpdateVariableInFile::2
      • Update do_VBusOutputSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_VBusMeasurementsSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_CC_VoltageSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_VBusOutputSelfTest in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update do_VBusMeasurementsSelfTest in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update do_CC_VoltageSelfTest in file Variables.ginc to 1
      • Waiting for user action: In order to ensure the Exerciser is generating VBUS and CC Voltage at safe levels, please ensure that nothing is connected to the Exerciser port and then press 'OK'.
      • Running "VBus and CC Voltage Self-Test" module
      • Set Sync Id to []
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.rec: Starting Recording
      • ApplyExtTriggerOutRecOption():: No change was applied!
      • ApplyPowerDeliveryCaptureForHubTests()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Stopping PD Generation
      • Analyzer Trigged... 1944 ms
      • VBusSelfTest.rec: Stopping Recording at 2056 ms
      • Remove Sync Id
      • Trace is ready... 4008 ms
      • making a copy from Intermediate folder...
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 18
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.vse: Running Verification Script
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\Preliminary\22930_VBusSelfTest.usb: Saving trace file
      • Trace captured.4616 ms
      • Waiting for user action: VBus Self-Test or CC Voltage Self-Test complete. Connect the PUT to the Exerciser port and then press 'OK' to continue.
      • VBusSelfTest : Finished
        • Automation Object was destroyed.
    • Determine Cable type : Voyager serial number #22930 pass
      • Teledyne LeCroy USB Compliance Suite Version: 7.92 Build 1198
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
      • VIF initiated successfully!
      • CVS_Manager_Class was created
      • CVS_Manager_Class::Initialize::Number of connected boards: 1
      • Argument(1)=22930
      • Argument(2)=0
      • Board_Class was created
      • Board_Class::ReadBoardInfo() for serial number #22930
      • Creating Automation Object ...
      • Binding Voyager #0 with Serial #22930
      • Board_Class::OpenConnection() [CVS_0]
      • Board Name=Voyager M310e
      • BoardID=161
      • BoardRev=6
      • Serial=#22930
      • VIF Extraction
        • Extracting from component "1" of file "C:\Insight_VIF\ZyluxTeufel__OA2303__DV__3266_1226.xml" ...
        • VIF_Product_Type = 0
        • PD_Port_Type = 4
        • Connector_Type = 2
        • USB_PD_Support = YES
        • Type_C_State_Machine = 2
        • Captive_Cable = NO
        • Captive_Cable_Is_eMarked = 0xFF *
        • USB4_Supported = NO
        • Type_C_Can_Act_As_Device = YES
        • Type_C_Is_Alt_Mode_Adapter = NO
        • Device_Supports_USB_Data = YES
        • Device_Speed = 0
        • Device_Max_USB2_Speed = 1
        • USB4_Max_Speed = 0XFF *
        • Type_C_Can_Act_As_Host = NO
        • Host_Supports_USB_Data = 0XFF *
        • Host_Speed = 0XFF *
        • Type_C_Port_On_Hub = NO
        • Type_C_Supports_Audio_Accessory = NO
        • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
        • Type_C_Is_Debug_Target_SRC = NO
        • Type_C_Is_Debug_Target_SNK = NO
        • Type_C_Implements_Try_SRC = NO
        • Type_C_Implements_Try_SNK = NO
        • Host_Is_Embedded = 0XFF *
      • Successfully finished VIF Extraction.
      • UpdateVariableInFile::3
      • Update AnalyzerID in file VendorInformation.ginc to 18
      • UpdateVariableInFile::3
      • Update AnalyzerID in file VendorInformation.inc to 18
      • UpdateVariableInFile::17
      • Update BOARD_REV in file VendorInformation.ginc to 6
      • UpdateVariableInFile::17
      • Update BOARD_REV in file VendorInformation.inc to 6
      • The test conditions are met and test is applicable to run.
      • Test_Class::RunCableDetection() for CVS_0
      • Running "Cable Detection" module to check the connected Cable and PUT...
      • RunModule_Class::Create_CaptureTask(0,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.updg,,C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\PreliminaryTC_CableDetection_cvs0.usb)
      • RunModule_Class::ConfigModule(0,14,8000)
      • RunModule_Class::ConfigModule::GENERATION_WAIT_TIME -> 8000
      • RunModule_Class::ConfigModule(0,16,True)
      • RunModule_Class::ConfigModule::GENERATION_FAIL_IGNORANCE -> True
      • RunModule_Class::ConfigModule(0,12,GetCableDetectionVseValues)
      • RunModule_Class::ConfigModule::EXTRACT_VERIFIED_RESULTS -> GetCableDetectionVseValues
      • RunModule_Class::Run_Single(0)
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{01383B15-D11D-47C0-B19F-039FF61C7C47}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TC_CableDetection_cvs0.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\Preliminary\01_TC_CableDetection_cvs0.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Teufel-OA2303-3266][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#22930 wait_time_msec=8000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 3760 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Stopping Recording at 3880 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 5728 ms
      • Check_Class::Verify() on Trace from CVS_0
      • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
      • Check_Class::Verify()::Executing AlwaysApplicable
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 18
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
      • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\Preliminary\Debug\0
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.vse: Running Verification Script
      • Running Verification script : TC_CableDetection.vse
      • Running GetCableDetectionVseValues
      • CableDetection::Extracetd from VSE : PUT_Connected = YES
      • CableDetection::Extracetd from VSE : ConnectedCableType = VConn Pass-Thru
      • CableDetection::Extracetd from VSE : CableDirection = NORMAL
      • Verification Result: PASSED
      • Capture_Class::UpdateTraceFileName(1)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\Preliminary\01_TC_CableDetection_cvs0.usb: Saving trace file
      • Trace captured.
      • CableDetection_Class::Run_CableDetection::Result of Run_Single(0) = 1
      • UpdateVariableInFile::3
      • Update DETECTED_CABLE_TYPE in file CableVariables.ginc to 2
      • UpdateVariableInFile::3
      • Update DETECTED_CABLE_TYPE in file CableVariables.inc to 2
      • UpdateVariableInFile::8
      • Update PUT_CONNECTED in file CableVariables.ginc to YES
      • UpdateVariableInFile::8
      • Update PUT_CONNECTED in file CableVariables.inc to YES
      • UpdateVariableInFile::8
      • Update CABLE_DIRECTION in file CableVariables.ginc to NORMAL
      • UpdateVariableInFile::8
      • Update CABLE_DIRECTION in file CableVariables.inc to NORMAL
      • Test_Class::Run_CableOrientation() for CVS_0
      • Test_Class::Run_CableOrientation()::Set default CC line to CC_LINE_1 and Result to PASS because we cannot run the orientation according to the VIF
      • CableDetection_Class::SaveOrientationResults()
      • UpdateVariableInFile::2
      • Update bMaxPacketSize in file CableVariables.ginc to 64
      • UpdateVariableInFile::2
      • Update BOS_Length in file CableVariables.ginc to 64
      • UpdateVariableInFile::2
      • Update IS_USB2_STARTED in file CableVariables.ginc to 0
      • UpdateVariableInFile::8
      • Update DEFAULT_CC_LINE in file CableVariables.ginc to CC_LINE_1
      • UpdateVariableInFile::8
      • Update DEFAULT_CC_LINE in file CableVariables.inc to CC_LINE_1
      • TC_CableDetection : Finished
        • CVS_Manager_Class::Release()::Number of connected boards: 1
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #22930
        • Board_Class was destroyed
        • CVS_Manager_Class was destroyed
  • TEST.PD.PROT.SRC.08 VCONN_Swap Response FAIL
    • Teledyne LeCroy USB Compliance Suite Version: 7.92 Build 1198
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(1)=22930
    • Argument(2)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #22930
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #22930
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310e
    • BoardID=161
    • BoardRev=6
    • Serial=#22930
    • VIF Extraction
      • Extracting from component "1" of file "C:\Insight_VIF\ZyluxTeufel__OA2303__DV__3266_1226.xml" ...
      • UpdateVariableInFile::2
      • Update Src_SPR_Augmented_Counter in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Src_SPR_Augmented_Counter in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update Src_EPR_Counter in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Src_EPR_Counter in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update Src_Null_PDOs in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Src_Null_PDOs in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update Snk_PPS_Counter in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Snk_PPS_Counter in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update Snk_EPR_Counter in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Snk_EPR_Counter in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update Snk_Null_PDOs in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update Snk_Null_PDOs in file Variables.inc to 0
      • VIF_Product_Type = 0
      • PD_Port_Type = 4
      • Connector_Type = 2
      • USB_PD_Support = YES
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • PD_Specification_Revision = 2
      • Accepts_PR_Swap_As_Src = YES
      • USB_Suspend_May_Be_Cleared = YES
      • Unconstrained_Power = NO
      • USB_Comms_Capable = YES
      • DR_Swap_To_UFP_Supported = YES
      • Port_Source_Power_Type = 0
      • Num_Src_PDOs = 1
      • PD_Power_As_Source = 7500
      • Accepts_PR_Swap_As_Snk = YES
      • Requests_PR_Swap_As_Src = NO
      • Requests_PR_Swap_As_Snk = YES
      • DR_Swap_To_DFP_Supported = NO
      • Unchunked_Extended_Messages_Supported = YES
      • Num_Snk_PDOs = 4
      • PD_Power_As_Sink = 60000
      • No_USB_Suspend_May_Be_Set = YES
      • Higher_Capability_Set = YES
      • Num_Swappable_Battery_Slots = 0
      • Num_Fixed_Batteries = 1
      • VCONN_Swap_To_On_Supported = YES
      • VCONN_Swap_To_Off_Supported = YES
      • Attempts_Discov_SOP = NO
      • Modal_Operation_Supported_SOP = NO
      • FR_Swap_Reqd_Type_C_Current_As_Initial_Source = 0
      • Master_Port = YES
      • Has_Invariant_PDOs = YES
      • SOP_P_Capable = YES
      • EPR_Supported_As_Src = NO
      • EPR_Supported_As_Snk = NO
      • PD_Spec_Revision_Major = 3
      • PD_Spec_Revision_Minor = 1
      • PD_Spec_Version_Major = 1
      • PD_Spec_Version_Minor = 8
      • Type_C_Sources_VCONN = YES
      • Type_C_State_Machine = 2
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = NO
      • Type_C_Implements_Try_SRC = NO
      • Type_C_Implements_Try_SNK = NO
      • Host_Is_Embedded = 0XFF *
      • Src_PDO_Supply_Type1 = 0
      • Src_PDO_Peak_Current1 = 0
      • Src_PDO_Voltage1 = 100
      • Src_PDO_Max_Current1 = 150
      • Snk_PDO_Supply_Type1 = 0
      • Snk_PDO_Voltage1 = 100
      • Snk_PDO_Op_Current1 = 300
      • Snk_PDO_Supply_Type2 = 0
      • Snk_PDO_Voltage2 = 180
      • Snk_PDO_Op_Current2 = 300
      • Snk_PDO_Supply_Type3 = 0
      • Snk_PDO_Voltage3 = 300
      • Snk_PDO_Op_Current3 = 300
      • Snk_PDO_Supply_Type4 = 0
      • Snk_PDO_Voltage4 = 400
      • Snk_PDO_Op_Current4 = 300
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 18
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 18
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 6
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 6
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 0
    • Cable is matched.
    • Successfully detected device role (0x4) according to the provided VIF.
    • Test_Class::CheckTheCable()::UserFunctions(1): PD_CapabilityFunctionGenerator()
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • AddCondition:MaxConditionCounter = 2
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #22930 ...
    • Test Preliminary procedures has done.
    • Rev2Src fail
      • Power Delivery Link initialization on Voyager #22930 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#22930 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "Rev2Src"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 1
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_2
      • UpdateVariableInFile::2
      • Update Tester_RolePort in file VendorInformationExtra.inc to 2
      • UpdateVariableInFile::2
      • Update Tester_RolePort in file VendorInformationExtra.ginc to 2
      • UpdateVariableInFile::2
      • Update UUT_RolePort in file VendorInformationExtra.inc to 1
      • UpdateVariableInFile::2
      • Update UUT_RolePort in file VendorInformationExtra.ginc to 1
      • UpdateVariableInFile::2
      • Update SwapRequired in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update SwapRequired in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update CaptiveCableBringUP in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update CaptiveCableBringUP in file Variables.ginc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{4E979812-EF2D-4C45-B3F7-F91072D656A9}]
      • Board_Class::SetAnalyzerParameters (1, 0)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TEST.PD.PROT.SRC.8_Rev2Src.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\01_TEST.PD.PROT.SRC.8_Rev2Src.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Teufel-OA2303-3266][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_EXERCISER_ROLE = 4
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 4
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#22930 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 3376 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.rec: Stopping Recording at 3496 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 5472 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • COMMON.PROC.BU.1#1 pass
        • Saving COMMON.PROC.BU.1#1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • COMMON.PROC.BU.1#2 pass
        • Saving COMMON.PROC.BU.1#2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • COMMON.PROC.BU.1#3 pass
        • Saving COMMON.PROC.BU.1#3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • COMMON.PROC.BU.1#4 pass
        • Saving COMMON.PROC.BU.1#4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TEST.PD.PROT.SRC.8#1 pass
        • Saving TEST.PD.PROT.SRC.8#1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TEST.PD.PROT.SRC.8#2 pass
        • Saving TEST.PD.PROT.SRC.8#2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(5) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TEST.PD.PROT.SRC.8#3 pass
        • Saving TEST.PD.PROT.SRC.8#3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(6) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v7
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TEST.PD.PROT.SRC.8#4 pass
        • Saving TEST.PD.PROT.SRC.8#4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(7) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v8
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TEST.PD.PROT.SRC.8#5 pass
        • Saving TEST.PD.PROT.SRC.8#5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(8) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v9
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TEST.PD.PROT.SRC.8#6 fail
        • Saving TEST.PD.PROT.SRC.8#6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(9) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\1_c1v10
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse.Txt ...
        • Error(0x00000326): The UUT did not send Accept message when VCONN_Swap_To_Off_Supported = YES.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TEST.PD.PROT.SRC.8#7 n/a
        • Saving TEST.PD.PROT.SRC.8#7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(10) = 0
        • >> This step is not applicable because the the PUT did not correctly complete VCONN_Swap.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\01_TEST.PD.PROT.SRC.8_Rev2Src_FAIL.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
    • Rev3ChkdSrc pass
      • Power Delivery Link initialization on Voyager #22930 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#22930 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "Rev3ChkdSrc"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 2
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_3
      • UpdateVariableInFile::2
      • Update Tester_RolePort in file VendorInformationExtra.inc to 2
      • UpdateVariableInFile::2
      • Update Tester_RolePort in file VendorInformationExtra.ginc to 2
      • UpdateVariableInFile::2
      • Update UUT_RolePort in file VendorInformationExtra.inc to 1
      • UpdateVariableInFile::2
      • Update UUT_RolePort in file VendorInformationExtra.ginc to 1
      • UpdateVariableInFile::2
      • Update SwapRequired in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update SwapRequired in file Variables.ginc to 0
      • UpdateVariableInFile::2
      • Update CaptiveCableBringUP in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update CaptiveCableBringUP in file Variables.ginc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{8AAF22D3-ED70-4D93-96BC-E360003B52F3}]
      • Board_Class::SetAnalyzerParameters (1, 0)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TEST.PD.PROT.SRC.8_Rev3ChkdSrc.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\02_TEST.PD.PROT.SRC.8_Rev3ChkdSrc.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Teufel-OA2303-3266][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_EXERCISER_ROLE = 4
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 4
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#22930 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 8592 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.rec: Stopping Recording at 8720 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 10712 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • COMMON.PROC.BU.1#1 pass
        • Saving COMMON.PROC.BU.1#1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • COMMON.PROC.BU.1#2 pass
        • Saving COMMON.PROC.BU.1#2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • COMMON.PROC.BU.1#3 pass
        • Saving COMMON.PROC.BU.1#3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • COMMON.PROC.BU.1#4 pass
        • Saving COMMON.PROC.BU.1#4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "COMMON.PROC.BU.1#4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TEST.PD.PROT.SRC.8#1 pass
        • Saving TEST.PD.PROT.SRC.8#1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TEST.PD.PROT.SRC.8#2 pass
        • Saving TEST.PD.PROT.SRC.8#2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(5) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TEST.PD.PROT.SRC.8#3 pass
        • Saving TEST.PD.PROT.SRC.8#3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(6) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v7
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TEST.PD.PROT.SRC.8#4 pass
        • Saving TEST.PD.PROT.SRC.8#4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(7) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v8
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TEST.PD.PROT.SRC.8#5 pass
        • Saving TEST.PD.PROT.SRC.8#5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(8) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v9
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TEST.PD.PROT.SRC.8#6 pass
        • Saving TEST.PD.PROT.SRC.8#6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(9) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v10
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TEST.PD.PROT.SRC.8#7 pass
        • Saving TEST.PD.PROT.SRC.8#7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TEST.PD.PROT.SRC.8#7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8204
        • Update VID_List in file Variables.inc to maximum 0 elements
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Do_CheckVerificationResult
        • GetCheckResult(10) = 1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 18
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 20000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\Debug\2_c2v11
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Power Delivery - USBIF\Protocol Specific Tests\TEST.PD.PROT.SRC.8.vse: Running Verification Script
        • Running Verification script : TEST.PD.PROT.SRC.8.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20241225_223649\USB Power Delivery\TEST.PD.PROT.SRC.8\02_TEST.PD.PROT.SRC.8_Rev3ChkdSrc.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #22930
    • TEST.PD.PROT.SRC.8 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 44 seconds