// Format=CSV; Hex=CoderUpper; BreakOutBytes=False; PEC=False [DO NOT REMOVE THIS LINE IF YOU WANT TO IMPORT USING A FUSION TOOL]
"// For reads, the last field is what is expected back from the device"
// Creator: Texas Instruments Fusion Digital Power Designer v7.0.21
"// Date: 18 May, 2018"
// Exported from UCD9244 - Firmware: 6.4.0.12746
// Stopping power conversion on all rails by forcing ON_OFF_CONFIG to Operation Only ...
// Write ON_OFF_CONFIG [0x02] for Rail #1 Mode: OPERATION Only 
I2CWrite,0x9C0000
"// I2CRead @ address 4E, cmd 00 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C021A
"// I2CRead @ address 4E, cmd 02 should return 0x1A [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OPERATION [0x01] for Rail #1 ImmediateOff
I2CWrite,0x9C0100
"// I2CRead @ address 4E, cmd 01 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [0x02] for Rail #2 Mode: OPERATION Only 
I2CWrite,0x9C0001
"// I2CRead @ address 4E, cmd 00 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C021A
"// I2CRead @ address 4E, cmd 02 should return 0x1A [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OPERATION [0x01] for Rail #2 ImmediateOff
I2CWrite,0x9C0100
"// I2CRead @ address 4E, cmd 01 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [0x02] for Rail #3 Mode: OPERATION Only 
I2CWrite,0x9C0002
"// I2CRead @ address 4E, cmd 00 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C021A
"// I2CRead @ address 4E, cmd 02 should return 0x1A [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OPERATION [0x01] for Rail #3 ImmediateOff
I2CWrite,0x9C0100
"// I2CRead @ address 4E, cmd 01 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [0x02] for Rail #4 Mode: OPERATION Only 
I2CWrite,0x9C0003
"// I2CRead @ address 4E, cmd 00 should return 0x03 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C021A
"// I2CRead @ address 4E, cmd 02 should return 0x1A [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OPERATION [0x01] for Rail #4 ImmediateOff
I2CWrite,0x9C0100
"// I2CRead @ address 4E, cmd 01 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
Pause,500,Pausing 500.00 ms
// Write PHASE_INFO [MFR 02] Rail #1: 1 Phase: 1A; Rail #2: 1 Phase: 2A; Rail #3: 1 Phase: 3A; Rail #4: 1 Phase: 4A
I2CWrite,0x9CD20401041040
"// I2CRead @ address 4E, cmd D2 should return 0x01041040 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write FREQUENCY_SWITCH [Rail #1] 751.0 kHz
I2CWrite,0x9C0000
"// I2CRead @ address 4E, cmd 00 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C33EF02
"// I2CRead @ address 4E, cmd 33 should return 0xEF02 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write FREQUENCY_SWITCH [Rail #2] 751.0 kHz
I2CWrite,0x9C0001
"// I2CRead @ address 4E, cmd 00 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C33EF02
"// I2CRead @ address 4E, cmd 33 should return 0xEF02 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write FREQUENCY_SWITCH [Rail #3] 751.0 kHz
I2CWrite,0x9C0002
"// I2CRead @ address 4E, cmd 00 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C33EF02
"// I2CRead @ address 4E, cmd 33 should return 0xEF02 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write FREQUENCY_SWITCH [Rail #4] 751.0 kHz
I2CWrite,0x9C0003
"// I2CRead @ address 4E, cmd 00 should return 0x03 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C33EF02
"// I2CRead @ address 4E, cmd 33 should return 0xEF02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0000
"// I2CRead @ address 4E, cmd 00 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0001
"// I2CRead @ address 4E, cmd 00 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0002
"// I2CRead @ address 4E, cmd 00 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0003
"// I2CRead @ address 4E, cmd 00 should return 0x03 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
// Execute STORE_DEFAULT_ALL
I2CWrite,0x9C11
Pause,2000,"Pausing 2,000.00 ms for STORE_DEFAULT_ALL hold time"
// Execute SOFT_RESET [MFR 11]
I2CWrite,0x9CDB
Pause,2000,"Pausing 2,000.00 ms for Reset device and wait for it to come back online"
"// Write VID_CONFIG [Rail #1] Format: Ignore, Vout Low: 0.700V, Vout High: 1.103V, Lockout Interval: 2,000 msec"
I2CWrite,0x9C0000
"// I2CRead @ address 4E, cmd 00 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CBB0900320BA4110000D007
"// I2CRead @ address 4E, cmd BB should return 0x00320BA4110000D007 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VID_CONFIG [Rail #2] Format: Ignore, Vout Low: 0.700V, Vout High: 1.103V, Lockout Interval: 2,000 msec"
I2CWrite,0x9C0001
"// I2CRead @ address 4E, cmd 00 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CBB0900320BA4110000D007
"// I2CRead @ address 4E, cmd BB should return 0x00320BA4110000D007 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VID_CONFIG [Rail #3] Format: Ignore, Vout Low: 0.000V, Vout High: 0.000V, Lockout Interval: 0 msec"
I2CWrite,0x9C0002
"// I2CRead @ address 4E, cmd 00 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CBB09000000000000000000
"// I2CRead @ address 4E, cmd BB should return 0x000000000000000000 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VID_CONFIG [Rail #4] Format: Ignore, Vout Low: 0.000V, Vout High: 0.000V, Lockout Interval: 0 msec"
I2CWrite,0x9C0003
"// I2CRead @ address 4E, cmd 00 should return 0x03 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CBB09000000000000000000
"// I2CRead @ address 4E, cmd BB should return 0x000000000000000000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_DATE 032811
I2CWrite,0x9C9D06303332383131
"// I2CRead @ address 4E, cmd 9D should return 0x303332383131 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_ID COMPUNETIX
I2CWrite,0x9C990A434F4D50554E45544958
"// I2CRead @ address 4E, cmd 99 should return 0x434F4D50554E45544958 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_LOCATION PA
I2CWrite,0x9C9C025041
"// I2CRead @ address 4E, cmd 9C should return 0x5041 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_MODEL 29-P220-A01
I2CWrite,0x9C9A0B32392D503232302D413031
"// I2CRead @ address 4E, cmd 9A should return 0x32392D503232302D413031 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_REVISION A
I2CWrite,0x9C9B0141
"// I2CRead @ address 4E, cmd 9B should return 0x41 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MFR_SERIAL 000000
I2CWrite,0x9C9E06303030303030
"// I2CRead @ address 4E, cmd 9E should return 0x303030303030 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SECURITY_BIT_MASK [MFR 36] No commands write protected
I2CWrite,0x9CF4200000000000000000000000000000000000000000000000000000000000000000
"// I2CRead @ address 4E, cmd F4 should return 0x0000000000000000000000000000000000000000000000000000000000000000 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write SYNC_CONFIG Sync Output Source: None; Rail #1: Trigger Source=None, Delay=0%; Rail #2: Trigger Source=DPWM1, Delay=25%; Rail #3: Trigger Source=DPWM2, Delay=37.5%; Rail #4: Trigger Source=DPWM3, Delay=25%"
I2CWrite,0x9CB909000000014002600340
"// I2CRead @ address 4E, cmd B9 should return 0x000000014002600340 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write USER_DATA_00 User_Data_00
I2CWrite,0x9CB00C557365725F446174615F3030
"// I2CRead @ address 4E, cmd B0 should return 0x557365725F446174615F3030 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_OFF 4.000 V
I2CWrite,0x9C3600CA
"// I2CRead @ address 4E, cmd 36 should return 0x00CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_ON 4.500 V
I2CWrite,0x9C3540CA
"// I2CRead @ address 4E, cmd 35 should return 0x40CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_OV_FAULT_LIMIT 6.000 V
I2CWrite,0x9C5500CB
"// I2CRead @ address 4E, cmd 55 should return 0x00CB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VIN_OV_FAULT_RESPONSE Response=2,Restart=0,Delay=0"
I2CWrite,0x9C5680
"// I2CRead @ address 4E, cmd 56 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_OV_WARN_LIMIT 5.500 V
I2CWrite,0x9C57C0CA
"// I2CRead @ address 4E, cmd 57 should return 0xC0CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_SCALE [MFR 03] 0.128 
I2CWrite,0x9CD30DA2
"// I2CRead @ address 4E, cmd D3 should return 0x0DA2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_UV_FAULT_LIMIT 4.000 V
I2CWrite,0x9C5900CA
"// I2CRead @ address 4E, cmd 59 should return 0x00CA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VIN_UV_FAULT_RESPONSE Response=0,Restart=0,Delay=0"
I2CWrite,0x9C5A00
"// I2CRead @ address 4E, cmd 5A should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VIN_UV_WARN_LIMIT 4.500 V
I2CWrite,0x9C5840CA
"// I2CRead @ address 4E, cmd 58 should return 0x40CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MAX [Rail #1] 1.600 V
I2CWrite,0x9C0000
"// I2CRead @ address 4E, cmd 00 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C249919
"// I2CRead @ address 4E, cmd 24 should return 0x9919 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [Rail #1] Mode: Always Converting
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_0 [META,Rail #1] B1=[0.94629 -1.72461 0.78223] A1=[1.00000 -1.22852 0.22852] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[1.00,1.00,1.00,1.00,1.00]"
I2CWrite,0x9CD400
"// I2CRead @ address 4E, cmd D4 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51803C9091A0321000104EA0F16000000008410410404033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x03C9091A0321000104EA0F16000000008410410404033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_1 [META,Rail #1] B1=[0.94629 -1.72461 0.78223] A1=[1.00000 -1.22852 0.22852] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[2.00,1.75,1.00,1.75,2.00]"
I2CWrite,0x9CD401
"// I2CRead @ address 4E, cmd D4 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51803C9091A0321000104EA0F1600000000841C81C804033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x03C9091A0321000104EA0F1600000000841C81C804033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_2 [META,Rail #1] B1=[4.97656 -8.80469 3.86719] A1=[1.00000 -1.33594 0.33594] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-3.00,3.00,5.00] Gains=[1.50,1.25,1.00,1.25,1.50]"
I2CWrite,0x9CD402
"// I2CRead @ address 4E, cmd D4 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD518027D0B9901EF000400AB0FD5000000008414614605033D3B
"// I2CRead @ address 4E, cmd D5 should return 0x027D0B9901EF000400AB0FD5000000008414614605033D3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_CONFIG [MFR 06,Rail #1] DPWM Shutdown Action: TriState, Fault Pin On Restart Mode: IgnoreFaultPin, Interrupt Pin Polarity: ActiveHigh"
I2CWrite,0x9CD601
"// I2CRead @ address 4E, cmd D6 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_MIN_PULSE [MFR 15,Rail #1] 20 ns"
I2CWrite,0x9CDF1400
"// I2CRead @ address 4E, cmd DF should return 0x1400 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write EADC_SAMPLE_TRIGGER [MFR 07,Rail #1] 228 ns"
I2CWrite,0x9CD790F3
"// I2CRead @ address 4E, cmd D7 should return 0x90F3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write FAST_OC_FAULT_LIMIT [MFR 39,Rail #1] 15.000 A/Phase"
I2CWrite,0x9CF7C0D3
"// I2CRead @ address 4E, cmd F7 should return 0xC0D3 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_FAULT_LIMIT [Rail #1] 13.000 A
I2CWrite,0x9C4640D3
"// I2CRead @ address 4E, cmd 46 should return 0x40D3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_FAULT_RESPONSE [Rail #1] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4780
"// I2CRead @ address 4E, cmd 47 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_LV_FAULT_LIMIT [Rail #1] 0.870 V
I2CWrite,0x9C48EB0D
"// I2CRead @ address 4E, cmd 48 should return 0xEB0D [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_LV_FAULT_RESPONSE [Rail #1] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4900
"// I2CRead @ address 4E, cmd 49 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_WARN_LIMIT [Rail #1] 10.500 A
I2CWrite,0x9C4AA0D2
"// I2CRead @ address 4E, cmd 4A should return 0xA0D2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_UC_FAULT_LIMIT [Rail #1] -3.297 A
I2CWrite,0x9C4BB4C4
"// I2CRead @ address 4E, cmd 4B should return 0xB4C4 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_UC_FAULT_RESPONSE [Rail #1] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4C00
"// I2CRead @ address 4E, cmd 4C should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_CONFIG [MFR 29,Rail #1] CLA Gain Control: NormalLoad; Phase Control: NormalLoad; Num Light Load Phases: 1"
I2CWrite,0x9CED00
"// I2CRead @ address 4E, cmd ED should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_HIGH [MFR 27,Rail #1] 0.000 A"
I2CWrite,0x9CEB0080
"// I2CRead @ address 4E, cmd EB should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_LOW [MFR 38,Rail #1] 0.000 A"
I2CWrite,0x9CF60080
"// I2CRead @ address 4E, cmd F6 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MAX_DUTY [Rail #1] 99.0 %
I2CWrite,0x9C326300
"// I2CRead @ address 4E, cmd 32 should return 0x6300 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_FAULT_LIMIT [Rail #1] 120 C
I2CWrite,0x9C4FC0EB
"// I2CRead @ address 4E, cmd 4F should return 0xC0EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write OT_FAULT_RESPONSE [Rail #1] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C5080
"// I2CRead @ address 4E, cmd 50 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_WARN_LIMIT [Rail #1] 100 C
I2CWrite,0x9C5120EB
"// I2CRead @ address 4E, cmd 51 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write PHASE_DROP_CAL [MFR 42,Rail #1] 1.000 "
I2CWrite,0x9CFA00BA
"// I2CRead @ address 4E, cmd FA should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_OFF [Rail #1] 1.020 V
I2CWrite,0x9C5F5210
"// I2CRead @ address 4E, cmd 5F should return 0x5210 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_ON [Rail #1] 1.080 V
I2CWrite,0x9C5E4811
"// I2CRead @ address 4E, cmd 5E should return 0x4811 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_CML [Rail #1] <EMPTY>
I2CWrite,0x9C1B7E00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_INPUT [Rail #1] <EMPTY>
I2CWrite,0x9C1B7C00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_IOUT [Rail #1] <EMPTY>
I2CWrite,0x9C1B7B00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_MFR_SPECIFIC [Rail #1] <EMPTY>
I2CWrite,0x9C1B8000
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_OTHER [Rail #1] <EMPTY>
I2CWrite,0x9C1B7F00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_TEMPERATURE [Rail #1] <EMPTY>
I2CWrite,0x9C1B7D00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_VOUT [Rail #1] <EMPTY>
I2CWrite,0x9C1B7A00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write THERMAL_COEFF [MFR 13,Rail #1] 0.000 %/C"
I2CWrite,0x9CDD0080
"// I2CRead @ address 4E, cmd DD should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_DELAY [Rail #1] 0.0 ms
I2CWrite,0x9C640080
"// I2CRead @ address 4E, cmd 64 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_FALL [Rail #1] 5.0 ms
I2CWrite,0x9C6580CA
"// I2CRead @ address 4E, cmd 65 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_MAX_WARN_LIMIT [Rail #1] <No Limit>
I2CWrite,0x9C660080
"// I2CRead @ address 4E, cmd 66 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_DELAY [Rail #1] 0.0 ms
I2CWrite,0x9C600000
"// I2CRead @ address 4E, cmd 60 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_MAX_FAULT_LIMIT [Rail #1] 20.0 ms
I2CWrite,0x9C621400
"// I2CRead @ address 4E, cmd 62 should return 0x1400 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TON_MAX_FAULT_RESPONSE [Rail #1] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C6300
"// I2CRead @ address 4E, cmd 63 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_RISE [Rail #1] 5.0 ms
I2CWrite,0x9C6180CA
"// I2CRead @ address 4E, cmd 61 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_MODE [MFR 22,Rail #1] Off"
I2CWrite,0x9CE6FF
"// I2CRead @ address 4E, cmd E6 should return 0xFF [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_SCALE_MONITOR [MFR 23,Rail #1] 1.000 "
I2CWrite,0x9CE700BA
"// I2CRead @ address 4E, cmd E7 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_CAL_MONITOR [MFR 01,Rail #1] 0.000 V"
I2CWrite,0x9CD10000
"// I2CRead @ address 4E, cmd D1 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_CAL_OFFSET [Rail #1] 0.000 V
I2CWrite,0x9C230000
"// I2CRead @ address 4E, cmd 23 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_COMMAND [Rail #1] 1.200 V
I2CWrite,0x9C213313
"// I2CRead @ address 4E, cmd 21 should return 0x3313 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_HIGH [Rail #1] 1.260 V
I2CWrite,0x9C252914
"// I2CRead @ address 4E, cmd 25 should return 0x2914 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_LOW [Rail #1] 1.140 V
I2CWrite,0x9C263D12
"// I2CRead @ address 4E, cmd 26 should return 0x3D12 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_FAULT_LIMIT [Rail #1] 1.380 V
I2CWrite,0x9C401416
"// I2CRead @ address 4E, cmd 40 should return 0x1416 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_OV_FAULT_RESPONSE [Rail #1] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4100
"// I2CRead @ address 4E, cmd 41 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_WARN_LIMIT [Rail #1] 1.320 V
I2CWrite,0x9C421F15
"// I2CRead @ address 4E, cmd 42 should return 0x1F15 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_LOOP [Rail #1] 1.000 
I2CWrite,0x9C2900BA
"// I2CRead @ address 4E, cmd 29 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_MONITOR [Rail #1] 1.000 
I2CWrite,0x9C2A00BA
"// I2CRead @ address 4E, cmd 2A should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_TRANSITION_RATE [Rail #1] 0.250 mV/us
I2CWrite,0x9C2700AA
"// I2CRead @ address 4E, cmd 27 should return 0x00AA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_FAULT_LIMIT [Rail #1] 1.020 V
I2CWrite,0x9C445210
"// I2CRead @ address 4E, cmd 44 should return 0x5210 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_UV_FAULT_RESPONSE [Rail #1] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4500
"// I2CRead @ address 4E, cmd 45 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_WARN_LIMIT [Rail #1] 1.080 V
I2CWrite,0x9C434811
"// I2CRead @ address 4E, cmd 43 should return 0x4811 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_GAIN_1 [Rail #1] 99.7500 mohm
I2CWrite,0x9C381EEB
"// I2CRead @ address 4E, cmd 38 should return 0x1EEB [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_OFFSET_1 [Rail #1] 0.000000 A
I2CWrite,0x9C390080
"// I2CRead @ address 4E, cmd 39 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_GAIN_1 [MFR 20,Rail #1] 100.0 C/V"
I2CWrite,0x9CE420EB
"// I2CRead @ address 4E, cmd E4 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_OFFSET_1 [MFR 21,Rail #1] -47.00 C"
I2CWrite,0x9CE510E5
"// I2CRead @ address 4E, cmd E5 should return 0x10E5 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MAX [Rail #2] 2.000 V
I2CWrite,0x9C0001
"// I2CRead @ address 4E, cmd 00 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C240020
"// I2CRead @ address 4E, cmd 24 should return 0x0020 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [Rail #2] Mode: Always Converting
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_0 [META,Rail #2] B1=[0.92773 -1.67676 0.75391] A1=[1.00000 -1.19531 0.19531] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[1.00,1.00,1.00,1.00,1.00]"
I2CWrite,0x9CD400
"// I2CRead @ address 4E, cmd D4 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51803B6094B0304000104C80F38000000008410410404033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x03B6094B0304000104C80F38000000008410410404033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_1 [META,Rail #2] B1=[0.80859 -1.44727 0.64160] A1=[1.00000 -1.22852 0.22852] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[2.00,1.75,1.00,1.75,2.00]"
I2CWrite,0x9CD401
"// I2CRead @ address 4E, cmd D4 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD518033C0A360291000104EA0F1600000000841C81C804033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x033C0A360291000104EA0F1600000000841C81C804033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_2 [META,Rail #2] B1=[4.42578 -7.30859 2.93750] A1=[1.00000 -1.10938 0.10938] B2=[1.00000 0.23438] A2=[1.00000 0.23438] AFE_Gain=4 Limits=[-5.00,-3.00,3.00,5.00] Gains=[1.50,1.25,1.00,1.25,1.50]"
I2CWrite,0x9CD402
"// I2CRead @ address 4E, cmd D4 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD518046D08B102F00003011C0FE401E00E208414614605033D3B
"// I2CRead @ address 4E, cmd D5 should return 0x046D08B102F00003011C0FE401E00E208414614605033D3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_CONFIG [MFR 06,Rail #2] DPWM Shutdown Action: TriState, Fault Pin On Restart Mode: IgnoreFaultPin, Interrupt Pin Polarity: ActiveHigh"
I2CWrite,0x9CD601
"// I2CRead @ address 4E, cmd D6 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_MIN_PULSE [MFR 15,Rail #2] 20 ns"
I2CWrite,0x9CDF1400
"// I2CRead @ address 4E, cmd DF should return 0x1400 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write EADC_SAMPLE_TRIGGER [MFR 07,Rail #2] 228 ns"
I2CWrite,0x9CD790F3
"// I2CRead @ address 4E, cmd D7 should return 0x90F3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write FAST_OC_FAULT_LIMIT [MFR 39,Rail #2] 15.000 A/Phase"
I2CWrite,0x9CF7C0D3
"// I2CRead @ address 4E, cmd F7 should return 0xC0D3 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_FAULT_LIMIT [Rail #2] 13.000 A
I2CWrite,0x9C4640D3
"// I2CRead @ address 4E, cmd 46 should return 0x40D3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_FAULT_RESPONSE [Rail #2] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4780
"// I2CRead @ address 4E, cmd 47 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_LV_FAULT_LIMIT [Rail #2] 0.870 V
I2CWrite,0x9C48EB0D
"// I2CRead @ address 4E, cmd 48 should return 0xEB0D [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_LV_FAULT_RESPONSE [Rail #2] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4900
"// I2CRead @ address 4E, cmd 49 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_WARN_LIMIT [Rail #2] 10.500 A
I2CWrite,0x9C4AA0D2
"// I2CRead @ address 4E, cmd 4A should return 0xA0D2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_UC_FAULT_LIMIT [Rail #2] -3.297 A
I2CWrite,0x9C4BB4C4
"// I2CRead @ address 4E, cmd 4B should return 0xB4C4 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_UC_FAULT_RESPONSE [Rail #2] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4C00
"// I2CRead @ address 4E, cmd 4C should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_CONFIG [MFR 29,Rail #2] CLA Gain Control: NormalLoad; Phase Control: NormalLoad; Num Light Load Phases: 1"
I2CWrite,0x9CED00
"// I2CRead @ address 4E, cmd ED should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_HIGH [MFR 27,Rail #2] 0.000 A"
I2CWrite,0x9CEB0080
"// I2CRead @ address 4E, cmd EB should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_LOW [MFR 38,Rail #2] 0.000 A"
I2CWrite,0x9CF60080
"// I2CRead @ address 4E, cmd F6 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MAX_DUTY [Rail #2] 99.0 %
I2CWrite,0x9C326300
"// I2CRead @ address 4E, cmd 32 should return 0x6300 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_FAULT_LIMIT [Rail #2] 120 C
I2CWrite,0x9C4FC0EB
"// I2CRead @ address 4E, cmd 4F should return 0xC0EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write OT_FAULT_RESPONSE [Rail #2] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C5080
"// I2CRead @ address 4E, cmd 50 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_WARN_LIMIT [Rail #2] 100 C
I2CWrite,0x9C5120EB
"// I2CRead @ address 4E, cmd 51 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write PHASE_DROP_CAL [MFR 42,Rail #2] 1.000 "
I2CWrite,0x9CFA00BA
"// I2CRead @ address 4E, cmd FA should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_OFF [Rail #2] 1.530 V
I2CWrite,0x9C5F7B18
"// I2CRead @ address 4E, cmd 5F should return 0x7B18 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_ON [Rail #2] 1.620 V
I2CWrite,0x9C5EEC19
"// I2CRead @ address 4E, cmd 5E should return 0xEC19 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_CML [Rail #2] <EMPTY>
I2CWrite,0x9C1B7E00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_INPUT [Rail #2] <EMPTY>
I2CWrite,0x9C1B7C00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_IOUT [Rail #2] <EMPTY>
I2CWrite,0x9C1B7B00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_MFR_SPECIFIC [Rail #2] <EMPTY>
I2CWrite,0x9C1B8000
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_OTHER [Rail #2] <EMPTY>
I2CWrite,0x9C1B7F00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_TEMPERATURE [Rail #2] <EMPTY>
I2CWrite,0x9C1B7D00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_VOUT [Rail #2] <EMPTY>
I2CWrite,0x9C1B7A00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write THERMAL_COEFF [MFR 13,Rail #2] 0.000 %/C"
I2CWrite,0x9CDD0080
"// I2CRead @ address 4E, cmd DD should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_DELAY [Rail #2] 0.0 ms
I2CWrite,0x9C640080
"// I2CRead @ address 4E, cmd 64 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_FALL [Rail #2] 5.0 ms
I2CWrite,0x9C6580CA
"// I2CRead @ address 4E, cmd 65 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_MAX_WARN_LIMIT [Rail #2] <No Limit>
I2CWrite,0x9C660080
"// I2CRead @ address 4E, cmd 66 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_DELAY [Rail #2] 5.0 ms
I2CWrite,0x9C600500
"// I2CRead @ address 4E, cmd 60 should return 0x0500 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_MAX_FAULT_LIMIT [Rail #2] 20.0 ms
I2CWrite,0x9C621400
"// I2CRead @ address 4E, cmd 62 should return 0x1400 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TON_MAX_FAULT_RESPONSE [Rail #2] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C6300
"// I2CRead @ address 4E, cmd 63 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_RISE [Rail #2] 5.0 ms
I2CWrite,0x9C6180CA
"// I2CRead @ address 4E, cmd 61 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_MODE [MFR 22,Rail #2] Off"
I2CWrite,0x9CE6FF
"// I2CRead @ address 4E, cmd E6 should return 0xFF [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_SCALE_MONITOR [MFR 23,Rail #2] 1.000 "
I2CWrite,0x9CE700BA
"// I2CRead @ address 4E, cmd E7 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_CAL_MONITOR [MFR 01,Rail #2] 0.000 V"
I2CWrite,0x9CD10000
"// I2CRead @ address 4E, cmd D1 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_CAL_OFFSET [Rail #2] 0.000 V
I2CWrite,0x9C230000
"// I2CRead @ address 4E, cmd 23 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_COMMAND [Rail #2] 1.800 V
I2CWrite,0x9C21CD1C
"// I2CRead @ address 4E, cmd 21 should return 0xCD1C [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_HIGH [Rail #2] 1.890 V
I2CWrite,0x9C253D1E
"// I2CRead @ address 4E, cmd 25 should return 0x3D1E [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_LOW [Rail #2] 1.710 V
I2CWrite,0x9C265C1B
"// I2CRead @ address 4E, cmd 26 should return 0x5C1B [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_FAULT_LIMIT [Rail #2] 2.070 V
I2CWrite,0x9C401F21
"// I2CRead @ address 4E, cmd 40 should return 0x1F21 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_OV_FAULT_RESPONSE [Rail #2] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4100
"// I2CRead @ address 4E, cmd 41 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_WARN_LIMIT [Rail #2] 1.980 V
I2CWrite,0x9C42AE1F
"// I2CRead @ address 4E, cmd 42 should return 0xAE1F [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_LOOP [Rail #2] 1.000 
I2CWrite,0x9C2900BA
"// I2CRead @ address 4E, cmd 29 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_MONITOR [Rail #2] 1.000 
I2CWrite,0x9C2A00BA
"// I2CRead @ address 4E, cmd 2A should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_TRANSITION_RATE [Rail #2] 0.250 mV/us
I2CWrite,0x9C2700AA
"// I2CRead @ address 4E, cmd 27 should return 0x00AA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_FAULT_LIMIT [Rail #2] 1.530 V
I2CWrite,0x9C447B18
"// I2CRead @ address 4E, cmd 44 should return 0x7B18 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_UV_FAULT_RESPONSE [Rail #2] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4500
"// I2CRead @ address 4E, cmd 45 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_WARN_LIMIT [Rail #2] 1.620 V
I2CWrite,0x9C43EC19
"// I2CRead @ address 4E, cmd 43 should return 0xEC19 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_GAIN_1 [Rail #2] 2.0000 mohm
I2CWrite,0x9C380200
"// I2CRead @ address 4E, cmd 38 should return 0x0200 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_OFFSET_1 [Rail #2] 0.000000 A
I2CWrite,0x9C390080
"// I2CRead @ address 4E, cmd 39 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_GAIN_1 [MFR 20,Rail #2] 100.0 C/V"
I2CWrite,0x9CE420EB
"// I2CRead @ address 4E, cmd E4 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_OFFSET_1 [MFR 21,Rail #2] -47.00 C"
I2CWrite,0x9CE510E5
"// I2CRead @ address 4E, cmd E5 should return 0x10E5 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MAX [Rail #3] 3.200 V
I2CWrite,0x9C0002
"// I2CRead @ address 4E, cmd 00 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C243333
"// I2CRead @ address 4E, cmd 24 should return 0x3333 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [Rail #3] Mode: Always Converting
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_0 [META,Rail #3] B1=[4.03125 -7.91406 3.88672] A1=[1.00000 -1.59766 0.59766] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-3.00,3.00,5.00] Gains=[1.00,1.00,1.00,1.00,1.00]"
I2CWrite,0x9CD400
"// I2CRead @ address 4E, cmd D4 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD5180408081603E3000301990F67000000008410410405033D3B
"// I2CRead @ address 4E, cmd D5 should return 0x0408081603E3000301990F67000000008410410405033D3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_1 [META,Rail #3] B1=[2.26953 -4.36719 2.10156] A1=[1.00000 -1.59766 0.59766] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[2.00,1.75,1.00,1.75,2.00]"
I2CWrite,0x9CD401
"// I2CRead @ address 4E, cmd D4 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51802450BA2021A000301990F6700000000841C81C804033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x02450BA2021A000301990F6700000000841C81C804033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_2 [META,Rail #3] B1=[8.10938 -12.25781 4.35938] A1=[1.00000 -1.15625 0.15625] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-3.00,3.00,5.00] Gains=[1.50,1.25,1.00,1.25,1.50]"
I2CWrite,0x9CD402
"// I2CRead @ address 4E, cmd D4 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD518040E09DF022E000400940FEC000000008414614605033D3B
"// I2CRead @ address 4E, cmd D5 should return 0x040E09DF022E000400940FEC000000008414614605033D3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_CONFIG [MFR 06,Rail #3] DPWM Shutdown Action: TriState, Fault Pin On Restart Mode: IgnoreFaultPin, Interrupt Pin Polarity: ActiveHigh"
I2CWrite,0x9CD601
"// I2CRead @ address 4E, cmd D6 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_MIN_PULSE [MFR 15,Rail #3] 20 ns"
I2CWrite,0x9CDF80DA
"// I2CRead @ address 4E, cmd DF should return 0x80DA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write EADC_SAMPLE_TRIGGER [MFR 07,Rail #3] 228 ns"
I2CWrite,0x9CD790F3
"// I2CRead @ address 4E, cmd D7 should return 0x90F3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write FAST_OC_FAULT_LIMIT [MFR 39,Rail #3] 15.000 A/Phase"
I2CWrite,0x9CF7C0D3
"// I2CRead @ address 4E, cmd F7 should return 0xC0D3 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_FAULT_LIMIT [Rail #3] 13.000 A
I2CWrite,0x9C4640D3
"// I2CRead @ address 4E, cmd 46 should return 0x40D3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_FAULT_RESPONSE [Rail #3] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4780
"// I2CRead @ address 4E, cmd 47 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_LV_FAULT_LIMIT [Rail #3] 0.870 V
I2CWrite,0x9C48EB0D
"// I2CRead @ address 4E, cmd 48 should return 0xEB0D [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_LV_FAULT_RESPONSE [Rail #3] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4980
"// I2CRead @ address 4E, cmd 49 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_WARN_LIMIT [Rail #3] 10.500 A
I2CWrite,0x9C4AA0D2
"// I2CRead @ address 4E, cmd 4A should return 0xA0D2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_UC_FAULT_LIMIT [Rail #3] -3.297 A
I2CWrite,0x9C4BB4C4
"// I2CRead @ address 4E, cmd 4B should return 0xB4C4 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_UC_FAULT_RESPONSE [Rail #3] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4C00
"// I2CRead @ address 4E, cmd 4C should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_CONFIG [MFR 29,Rail #3] CLA Gain Control: NormalLoad; Phase Control: NormalLoad; Num Light Load Phases: 1"
I2CWrite,0x9CED00
"// I2CRead @ address 4E, cmd ED should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_HIGH [MFR 27,Rail #3] 0.000 A"
I2CWrite,0x9CEB0080
"// I2CRead @ address 4E, cmd EB should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_LOW [MFR 38,Rail #3] 0.000 A"
I2CWrite,0x9CF60080
"// I2CRead @ address 4E, cmd F6 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MAX_DUTY [Rail #3] 99.0 %
I2CWrite,0x9C3218EB
"// I2CRead @ address 4E, cmd 32 should return 0x18EB [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_FAULT_LIMIT [Rail #3] 120 C
I2CWrite,0x9C4FC0EB
"// I2CRead @ address 4E, cmd 4F should return 0xC0EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write OT_FAULT_RESPONSE [Rail #3] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C5080
"// I2CRead @ address 4E, cmd 50 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_WARN_LIMIT [Rail #3] 100 C
I2CWrite,0x9C5120EB
"// I2CRead @ address 4E, cmd 51 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write PHASE_DROP_CAL [MFR 42,Rail #3] 1.000 "
I2CWrite,0x9CFA00BA
"// I2CRead @ address 4E, cmd FA should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_OFF [Rail #3] 2.380 V
I2CWrite,0x9C5F1426
"// I2CRead @ address 4E, cmd 5F should return 0x1426 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_ON [Rail #3] 2.520 V
I2CWrite,0x9C5E5228
"// I2CRead @ address 4E, cmd 5E should return 0x5228 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_CML [Rail #3] <EMPTY>
I2CWrite,0x9C1B7E00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_INPUT [Rail #3] <EMPTY>
I2CWrite,0x9C1B7C00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_IOUT [Rail #3] <EMPTY>
I2CWrite,0x9C1B7B00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_MFR_SPECIFIC [Rail #3] <EMPTY>
I2CWrite,0x9C1B8000
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_OTHER [Rail #3] <EMPTY>
I2CWrite,0x9C1B7F00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_TEMPERATURE [Rail #3] <EMPTY>
I2CWrite,0x9C1B7D00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_VOUT [Rail #3] <EMPTY>
I2CWrite,0x9C1B7A00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write THERMAL_COEFF [MFR 13,Rail #3] 0.000 %/C"
I2CWrite,0x9CDD0080
"// I2CRead @ address 4E, cmd DD should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_DELAY [Rail #3] 0.0 ms
I2CWrite,0x9C640080
"// I2CRead @ address 4E, cmd 64 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_FALL [Rail #3] 5.0 ms
I2CWrite,0x9C6580CA
"// I2CRead @ address 4E, cmd 65 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_MAX_WARN_LIMIT [Rail #3] <No Limit>
I2CWrite,0x9C660080
"// I2CRead @ address 4E, cmd 66 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_DELAY [Rail #3] 10.0 ms
I2CWrite,0x9C600A00
"// I2CRead @ address 4E, cmd 60 should return 0x0A00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_MAX_FAULT_LIMIT [Rail #3] <No Limit>
I2CWrite,0x9C620080
"// I2CRead @ address 4E, cmd 62 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TON_MAX_FAULT_RESPONSE [Rail #3] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C6300
"// I2CRead @ address 4E, cmd 63 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_RISE [Rail #3] 5.0 ms
I2CWrite,0x9C6180CA
"// I2CRead @ address 4E, cmd 61 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_MODE [MFR 22,Rail #3] Off"
I2CWrite,0x9CE6FF
"// I2CRead @ address 4E, cmd E6 should return 0xFF [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_SCALE_MONITOR [MFR 23,Rail #3] 1.000 "
I2CWrite,0x9CE700BA
"// I2CRead @ address 4E, cmd E7 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_CAL_MONITOR [MFR 01,Rail #3] 0.000 V"
I2CWrite,0x9CD10000
"// I2CRead @ address 4E, cmd D1 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_CAL_OFFSET [Rail #3] 0.000 V
I2CWrite,0x9C230000
"// I2CRead @ address 4E, cmd 23 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_COMMAND [Rail #3] 2.800 V
I2CWrite,0x9C21CD2C
"// I2CRead @ address 4E, cmd 21 should return 0xCD2C [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_HIGH [Rail #3] 2.895 V
I2CWrite,0x9C25522E
"// I2CRead @ address 4E, cmd 25 should return 0x522E [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_LOW [Rail #3] 2.660 V
I2CWrite,0x9C268F2A
"// I2CRead @ address 4E, cmd 26 should return 0x8F2A [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_FAULT_LIMIT [Rail #3] 3.172 V
I2CWrite,0x9C40C132
"// I2CRead @ address 4E, cmd 40 should return 0xC132 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_OV_FAULT_RESPONSE [Rail #3] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4180
"// I2CRead @ address 4E, cmd 41 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_WARN_LIMIT [Rail #3] 3.035 V
I2CWrite,0x9C428F30
"// I2CRead @ address 4E, cmd 42 should return 0x8F30 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_LOOP [Rail #3] 1.000 
I2CWrite,0x9C2900BA
"// I2CRead @ address 4E, cmd 29 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_MONITOR [Rail #3] 1.000 
I2CWrite,0x9C2A00BA
"// I2CRead @ address 4E, cmd 2A should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_TRANSITION_RATE [Rail #3] 0.480 mV/us
I2CWrite,0x9C27D7AB
"// I2CRead @ address 4E, cmd 27 should return 0xD7AB [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_FAULT_LIMIT [Rail #3] 2.380 V
I2CWrite,0x9C441426
"// I2CRead @ address 4E, cmd 44 should return 0x1426 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_UV_FAULT_RESPONSE [Rail #3] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4500
"// I2CRead @ address 4E, cmd 45 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_WARN_LIMIT [Rail #3] 2.520 V
I2CWrite,0x9C435228
"// I2CRead @ address 4E, cmd 43 should return 0x5228 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_GAIN_1 [Rail #3] 2.0000 mohm
I2CWrite,0x9C380200
"// I2CRead @ address 4E, cmd 38 should return 0x0200 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_OFFSET_1 [Rail #3] 0.000000 A
I2CWrite,0x9C390080
"// I2CRead @ address 4E, cmd 39 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_GAIN_1 [MFR 20,Rail #3] 100.0 C/V"
I2CWrite,0x9CE420EB
"// I2CRead @ address 4E, cmd E4 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_OFFSET_1 [MFR 21,Rail #3] -47.00 C"
I2CWrite,0x9CE510E5
"// I2CRead @ address 4E, cmd E5 should return 0x10E5 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MAX [Rail #4] 1.600 V
I2CWrite,0x9C0003
"// I2CRead @ address 4E, cmd 00 should return 0x03 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9C249919
"// I2CRead @ address 4E, cmd 24 should return 0x9919 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write ON_OFF_CONFIG [Rail #4] Mode: Always Converting
I2CWrite,0x9C0202
"// I2CRead @ address 4E, cmd 02 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_0 [META,Rail #4] B1=[1.84375 -3.35352 1.51758] A1=[1.00000 -1.22852 0.22852] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[1.00,1.00,1.00,1.00,1.00]"
I2CWrite,0x9CD400
"// I2CRead @ address 4E, cmd D4 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51803B0094B0309000202750F8B000000008410410404033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x03B0094B0309000202750F8B000000008410410404033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_1 [META,Rail #4] B1=[0.94727 -1.72461 0.78125] A1=[1.00000 -1.22852 0.22852] B2=[1.00000 0.00000] A2=[1.00000 0.00000] AFE_Gain=4 Limits=[-5.00,-4.00,3.00,4.00] Gains=[2.00,1.75,1.00,1.75,2.00]"
I2CWrite,0x9CD401
"// I2CRead @ address 4E, cmd D4 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD51803CA091A0320000104EA0F1600000000841C81C804033C3B
"// I2CRead @ address 4E, cmd D5 should return 0x03CA091A0320000104EA0F1600000000841C81C804033C3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write CLA_GAINS_BANK_2 [META,Rail #4] B1=[8.10938 -12.25000 4.35938] A1=[1.00000 -1.15625 0.15625] B2=[1.00000 0.00049] A2=[1.00000 0.00049] AFE_Gain=4 Limits=[-5.00,-3.00,3.00,5.00] Gains=[1.50,1.25,1.00,1.25,1.50]"
I2CWrite,0x9CD402
"// I2CRead @ address 4E, cmd D4 should return 0x02 [import/export does not support I2CRead; SMBus mode is recommended]"
I2CWrite,0x9CD518040E09E0022E000400940FEC00010FFF8414614605033D3B
"// I2CRead @ address 4E, cmd D5 should return 0x040E09E0022E000400940FEC00010FFF8414614605033D3B [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_CONFIG [MFR 06,Rail #4] DPWM Shutdown Action: TriState, Fault Pin On Restart Mode: IgnoreFaultPin, Interrupt Pin Polarity: ActiveHigh"
I2CWrite,0x9CD601
"// I2CRead @ address 4E, cmd D6 should return 0x01 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write DRIVER_MIN_PULSE [MFR 15,Rail #4] 20 ns"
I2CWrite,0x9CDF80DA
"// I2CRead @ address 4E, cmd DF should return 0x80DA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write EADC_SAMPLE_TRIGGER [MFR 07,Rail #4] 228 ns"
I2CWrite,0x9CD790F3
"// I2CRead @ address 4E, cmd D7 should return 0x90F3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write FAST_OC_FAULT_LIMIT [MFR 39,Rail #4] 15.000 A/Phase"
I2CWrite,0x9CF7C0D3
"// I2CRead @ address 4E, cmd F7 should return 0xC0D3 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_FAULT_LIMIT [Rail #4] 13.000 A
I2CWrite,0x9C4640D3
"// I2CRead @ address 4E, cmd 46 should return 0x40D3 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_FAULT_RESPONSE [Rail #4] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4780
"// I2CRead @ address 4E, cmd 47 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_LV_FAULT_LIMIT [Rail #4] 0.870 V
I2CWrite,0x9C48EB0D
"// I2CRead @ address 4E, cmd 48 should return 0xEB0D [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_OC_LV_FAULT_RESPONSE [Rail #4] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4980
"// I2CRead @ address 4E, cmd 49 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_OC_WARN_LIMIT [Rail #4] 10.500 A
I2CWrite,0x9C4AA0D2
"// I2CRead @ address 4E, cmd 4A should return 0xA0D2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_UC_FAULT_LIMIT [Rail #4] -3.297 A
I2CWrite,0x9C4BB4C4
"// I2CRead @ address 4E, cmd 4B should return 0xB4C4 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write IOUT_UC_FAULT_RESPONSE [Rail #4] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4C00
"// I2CRead @ address 4E, cmd 4C should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_CONFIG [MFR 29,Rail #4] CLA Gain Control: NormalLoad; Phase Control: NormalLoad; Num Light Load Phases: 1"
I2CWrite,0x9CED00
"// I2CRead @ address 4E, cmd ED should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_HIGH [MFR 27,Rail #4] 0.000 A"
I2CWrite,0x9CEB0080
"// I2CRead @ address 4E, cmd EB should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write LIGHT_LOAD_LIMIT_LOW [MFR 38,Rail #4] 0.000 A"
I2CWrite,0x9CF60080
"// I2CRead @ address 4E, cmd F6 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write MAX_DUTY [Rail #4] 99.0 %
I2CWrite,0x9C3218EB
"// I2CRead @ address 4E, cmd 32 should return 0x18EB [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_FAULT_LIMIT [Rail #4] 120 C
I2CWrite,0x9C4FC0EB
"// I2CRead @ address 4E, cmd 4F should return 0xC0EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write OT_FAULT_RESPONSE [Rail #4] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C5080
"// I2CRead @ address 4E, cmd 50 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write OT_WARN_LIMIT [Rail #4] 100 C
I2CWrite,0x9C5120EB
"// I2CRead @ address 4E, cmd 51 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write PHASE_DROP_CAL [MFR 42,Rail #4] 1.000 "
I2CWrite,0x9CFA00BA
"// I2CRead @ address 4E, cmd FA should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_OFF [Rail #4] 0.850 V
I2CWrite,0x9C5F990D
"// I2CRead @ address 4E, cmd 5F should return 0x990D [import/export does not support I2CRead; SMBus mode is recommended]"
// Write POWER_GOOD_ON [Rail #4] 0.900 V
I2CWrite,0x9C5E660E
"// I2CRead @ address 4E, cmd 5E should return 0x660E [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_CML [Rail #4] <EMPTY>
I2CWrite,0x9C1B7E00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_INPUT [Rail #4] <EMPTY>
I2CWrite,0x9C1B7C00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_IOUT [Rail #4] <EMPTY>
I2CWrite,0x9C1B7B00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_MFR_SPECIFIC [Rail #4] <EMPTY>
I2CWrite,0x9C1B8000
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_OTHER [Rail #4] <EMPTY>
I2CWrite,0x9C1B7F00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_TEMPERATURE [Rail #4] <EMPTY>
I2CWrite,0x9C1B7D00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write SMBALERT_MASK_VOUT [Rail #4] <EMPTY>
I2CWrite,0x9C1B7A00
"// I2CRead @ address 4E, cmd 1B should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write THERMAL_COEFF [MFR 13,Rail #4] 0.000 %/C"
I2CWrite,0x9CDD0080
"// I2CRead @ address 4E, cmd DD should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_DELAY [Rail #4] 0.0 ms
I2CWrite,0x9C640080
"// I2CRead @ address 4E, cmd 64 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_FALL [Rail #4] 5.0 ms
I2CWrite,0x9C6580CA
"// I2CRead @ address 4E, cmd 65 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TOFF_MAX_WARN_LIMIT [Rail #4] <No Limit>
I2CWrite,0x9C660080
"// I2CRead @ address 4E, cmd 66 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_DELAY [Rail #4] 15.0 ms
I2CWrite,0x9C600F00
"// I2CRead @ address 4E, cmd 60 should return 0x0F00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_MAX_FAULT_LIMIT [Rail #4] <No Limit>
I2CWrite,0x9C620080
"// I2CRead @ address 4E, cmd 62 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TON_MAX_FAULT_RESPONSE [Rail #4] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C6300
"// I2CRead @ address 4E, cmd 63 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write TON_RISE [Rail #4] 5.0 ms
I2CWrite,0x9C6180CA
"// I2CRead @ address 4E, cmd 61 should return 0x80CA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_MODE [MFR 22,Rail #4] Off"
I2CWrite,0x9CE6FF
"// I2CRead @ address 4E, cmd E6 should return 0xFF [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TRACKING_SCALE_MONITOR [MFR 23,Rail #4] 1.000 "
I2CWrite,0x9CE700BA
"// I2CRead @ address 4E, cmd E7 should return 0x00BA [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_CAL_MONITOR [MFR 01,Rail #4] 0.000 V"
I2CWrite,0x9CD10000
"// I2CRead @ address 4E, cmd D1 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_CAL_OFFSET [Rail #4] 0.000 V
I2CWrite,0x9C230000
"// I2CRead @ address 4E, cmd 23 should return 0x0000 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_COMMAND [Rail #4] 1.000 V
I2CWrite,0x9C210010
"// I2CRead @ address 4E, cmd 21 should return 0x0010 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_HIGH [Rail #4] 1.000 V
I2CWrite,0x9C250010
"// I2CRead @ address 4E, cmd 25 should return 0x0010 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_MARGIN_LOW [Rail #4] 0.952 V
I2CWrite,0x9C263B0F
"// I2CRead @ address 4E, cmd 26 should return 0x3B0F [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_FAULT_LIMIT [Rail #4] 1.095 V
I2CWrite,0x9C408511
"// I2CRead @ address 4E, cmd 40 should return 0x8511 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_OV_FAULT_RESPONSE [Rail #4] Response=2,Restart=0,Delay=0"
I2CWrite,0x9C4180
"// I2CRead @ address 4E, cmd 41 should return 0x80 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_OV_WARN_LIMIT [Rail #4] 1.048 V
I2CWrite,0x9C42C410
"// I2CRead @ address 4E, cmd 42 should return 0xC410 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_LOOP [Rail #4] 1.000 
I2CWrite,0x9C290100
"// I2CRead @ address 4E, cmd 29 should return 0x0100 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_SCALE_MONITOR [Rail #4] 1.000 
I2CWrite,0x9C2A0100
"// I2CRead @ address 4E, cmd 2A should return 0x0100 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_TRANSITION_RATE [Rail #4] 0.558 mV/us
I2CWrite,0x9C273BB2
"// I2CRead @ address 4E, cmd 27 should return 0x3BB2 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_FAULT_LIMIT [Rail #4] 0.850 V
I2CWrite,0x9C44990D
"// I2CRead @ address 4E, cmd 44 should return 0x990D [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write VOUT_UV_FAULT_RESPONSE [Rail #4] Response=0,Restart=0,Delay=0"
I2CWrite,0x9C4500
"// I2CRead @ address 4E, cmd 45 should return 0x00 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write VOUT_UV_WARN_LIMIT [Rail #4] 0.900 V
I2CWrite,0x9C43660E
"// I2CRead @ address 4E, cmd 43 should return 0x660E [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_GAIN_1 [Rail #4] 2.0000 mohm
I2CWrite,0x9C380200
"// I2CRead @ address 4E, cmd 38 should return 0x0200 [import/export does not support I2CRead; SMBus mode is recommended]"
// Write IOUT_CAL_OFFSET_1 [Rail #4] 0.000000 A
I2CWrite,0x9C390080
"// I2CRead @ address 4E, cmd 39 should return 0x0080 [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_GAIN_1 [MFR 20,Rail #4] 100.0 C/V"
I2CWrite,0x9CE420EB
"// I2CRead @ address 4E, cmd E4 should return 0x20EB [import/export does not support I2CRead; SMBus mode is recommended]"
"// Write TEMPERATURE_CAL_OFFSET_1 [MFR 21,Rail #4] -47.00 C"
I2CWrite,0x9CE510E5
"// I2CRead @ address 4E, cmd E5 should return 0x10E5 [import/export does not support I2CRead; SMBus mode is recommended]"
// Store configuration to data flash
// Execute STORE_DEFAULT_ALL
I2CWrite,0x9C11
Pause,1000,"Pausing 1,000.00 ms for STORE_DEFAULT_ALL hold time"
