• 20250922_155440 9 PASS 2 FAIL 60 N/A
  • Preliminary Steps
    • Compliance Suite Settings
      • Save Mode: Save all
      • Capture Raw File: Disabled
      • Capture Power Measurement: Disabled
      • VBus and CC Self-Test: Enabled
    • Analyzing Vendor Information File (VIF)...
    • Making debounce values intermediate file...
    • VBUS and CC SELF-TEST: Voyager serial number #18361 pass
      • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
      • Creating Automation Object ...
      • Binding Voyager #0 with Serial #18361
      • Analyzer(0).SetAnalyzerParameters(1, 0)
      • UpdateVariableInFile::2
      • Update Expected_0V_Voltage in file Variables.inc to 30
      • UpdateVariableInFile::2
      • Update do_VBusOutputSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_VBusMeasurementsSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_CC_VoltageSelfTest in file Variables.inc to 1
      • UpdateVariableInFile::2
      • Update do_VBusOutputSelfTest in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update do_VBusMeasurementsSelfTest in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update do_CC_VoltageSelfTest in file Variables.ginc to 1
      • Waiting for user action: In order to ensure the Exerciser is generating VBUS and CC Voltage at safe levels, please ensure that nothing is connected to the Exerciser port and then press 'OK'.
      • User replied with "OK" after 968 ms
      • Running "VBus and CC Voltage Self-Test" module
      • Set Sync Id to []
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.rec: Starting Recording
      • ApplyExtTriggerOutRecOption():: No change was applied!
      • ApplyPowerDeliveryCaptureForHubTests()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.updg: Stopping PD Generation
      • Analyzer Trigged... 1864 ms
      • VBusSelfTest.rec: Stopping Recording at 1988 ms
      • Remove Sync Id
      • Trace is ready... 4028 ms
      • making a copy from Intermediate folder...
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 16
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\VBusSelfTest.vse: Running Verification Script
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\18361_VBusSelfTest.usb: Saving trace file
      • Trace captured.4376 ms
      • Waiting for user action: VBus Self-Test or CC Voltage Self-Test complete. Connect the PUT to the Exerciser port and then press 'OK' to continue.
      • Waiting for user action: VBus Self-Test or CC Voltage Self-Test complete. Connect the PUT to the Exerciser port and then press 'OK' to continue.
      • User replied with "OK" after 14244 ms
      • VBusSelfTest : Finished
        • Automation Object was destroyed.
    • Determine Cable type : Voyager serial number #18361 pass
      • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
      • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
      • VIF initiated successfully!
      • CVS_Manager_Class was created
      • CVS_Manager_Class::Initialize::Number of connected boards: 1
      • Argument(2)=18361
      • Argument(3)=0
      • Board_Class was created
      • Board_Class::ReadBoardInfo() for serial number #18361
      • Creating Automation Object ...
      • Binding Voyager #0 with Serial #18361
      • Board_Class::OpenConnection() [CVS_0]
      • Board Name=Voyager M310P
      • BoardID=130
      • BoardRev=17
      • Serial=#18361
      • PD EPR Support=0
      • VIF Extraction
        • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
        • VIF_Product_Type = 0
        • PD_Port_Type = 0XFF *
        • Connector_Type = 2
        • USB_PD_Support = NO
        • Type_C_State_Machine = 0
        • Captive_Cable = NO
        • Captive_Cable_Is_eMarked = 0xFF *
        • USB4_Supported = NO
        • Type_C_Can_Act_As_Device = NO
        • Type_C_Is_Alt_Mode_Adapter = 0xFF *
        • Device_Supports_USB_Data = 0xFF *
        • Device_Speed = 0XFF *
        • Device_Max_USB2_Speed = 0XFF *
        • USB4_Max_Speed = 0XFF *
        • Type_C_Can_Act_As_Host = YES
        • Host_Supports_USB_Data = YES
        • Host_Speed = 0
        • Type_C_Port_On_Hub = NO
        • Type_C_Supports_Audio_Accessory = NO
        • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
        • Type_C_Is_Debug_Target_SRC = NO
        • Type_C_Is_Debug_Target_SNK = 0XFF *
        • Type_C_Implements_Try_SRC = 0XFF *
        • Type_C_Implements_Try_SNK = 0XFF *
        • Host_Is_Embedded = YES
      • Successfully finished VIF Extraction.
      • UpdateVariableInFile::3
      • Update AnalyzerID in file VendorInformation.ginc to 16
      • UpdateVariableInFile::3
      • Update AnalyzerID in file VendorInformation.inc to 16
      • UpdateVariableInFile::17
      • Update BOARD_REV in file VendorInformation.ginc to 17
      • UpdateVariableInFile::17
      • Update BOARD_REV in file VendorInformation.inc to 17
      • UpdateVariableInFile::2
      • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
      • The test conditions are met and test is applicable to run.
      • Test_Class::RunCableDetection() for CVS_0
      • Running "Cable Detection" module to check the connected Cable and PUT...
      • RunModule_Class::Create_CaptureTask(0,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.updg,,C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\PreliminaryTC_CableDetection_cvs0.usb)
      • RunModule_Class::ConfigModule(0,14,8000)
      • RunModule_Class::ConfigModule::GENERATION_WAIT_TIME -> 8000
      • RunModule_Class::ConfigModule(0,16,True)
      • RunModule_Class::ConfigModule::GENERATION_FAIL_IGNORANCE -> True
      • RunModule_Class::ConfigModule(0,12,GetCableDetectionVseValues)
      • RunModule_Class::ConfigModule::EXTRACT_VERIFIED_RESULTS -> GetCableDetectionVseValues
      • RunModule_Class::Run_Single(0)
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{C8B7155A-5384-4862-9807-BF3421534D20}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TC_CableDetection_cvs0.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\01_TC_CableDetection_cvs0.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 3736 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.rec: Stopping Recording at 3856 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 5452 ms
      • Check_Class::Verify() on Trace from CVS_0
      • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
      • Check_Class::Verify()::Executing AlwaysApplicable
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 16
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
      • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\Debug\0
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableDetection.vse: Running Verification Script
      • Running Verification script : TC_CableDetection.vse
      • Running GetCableDetectionVseValues
      • CableDetection::Extracetd from VSE : PUT_Connected = YES
      • CableDetection::Extracetd from VSE : ConnectedCableType = VConn Pass-Thru
      • CableDetection::Extracetd from VSE : CableDirection = NORMAL
      • Verification Result: PASSED
      • Capture_Class::UpdateTraceFileName(1)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\01_TC_CableDetection_cvs0.usb: Saving trace file
      • Trace captured.
      • CableDetection_Class::Run_CableDetection::Result of Run_Single(0) = 1
      • UpdateVariableInFile::3
      • Update DETECTED_CABLE_TYPE in file CableVariables.ginc to 2
      • UpdateVariableInFile::3
      • Update DETECTED_CABLE_TYPE in file CableVariables.inc to 2
      • UpdateVariableInFile::8
      • Update PUT_CONNECTED in file CableVariables.ginc to YES
      • UpdateVariableInFile::8
      • Update PUT_CONNECTED in file CableVariables.inc to YES
      • UpdateVariableInFile::8
      • Update CABLE_DIRECTION in file CableVariables.ginc to NORMAL
      • UpdateVariableInFile::8
      • Update CABLE_DIRECTION in file CableVariables.inc to NORMAL
      • CableDetection_Class::Run_CableOrientation() for CVS_0
      • Running "Cable Orientation" module to check D+/D- lines on a VConn Pass-Thru cable
      • UpdateVariableInFile::8
      • Update Is_Host in file CableVariables.ginc to YES
      • UpdateVariableInFile::8
      • Update Is_Host in file CableVariables.inc to YES
      • UpdateVariableInFile::8
      • Update Is_Device in file CableVariables.ginc to NO
      • UpdateVariableInFile::8
      • Update Is_Device in file CableVariables.inc to NO
      • UpdateVariableInFile::2
      • Update USB2_DELAY in file CableVariables.ginc to 10
      • RunModule_Class::Create_CaptureTask(0,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Device.rec,C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation.updg,TC_CableOrientation_Device.utg,C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\PreliminaryTC_CableOrientation_Host.usb)
      • RunModule_Class::ConfigModule(0,13,WaitGeneration_CableOrientation_USB2_Host(this, wait_time_msec, diff_time))
      • RunModule_Class::ConfigModule::SPECIAL_GENERATION_WAIT -> WaitGeneration_CableOrientation_USB2_Host(this, wait_time_msec, diff_time)
      • RunModule_Class::ConfigModule(0,12,GetCableOrientationVseValues)
      • RunModule_Class::ConfigModule::EXTRACT_VERIFIED_RESULTS -> GetCableOrientationVseValues
      • RunModule_Class::ConfigModule(0,14,30000)
      • RunModule_Class::ConfigModule::GENERATION_WAIT_TIME -> 30000
      • RunModule_Class::ConfigModule(0,15,False)
      • RunModule_Class::ConfigModule::RUN_EXTRA_GEN_AUTOMATICALLY -> False
      • RunModule_Class::ConfigModule(0,16,True)
      • RunModule_Class::ConfigModule::GENERATION_FAIL_IGNORANCE -> True
      • RunModule_Class::Run_Single(0)
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{C94D9658-80EB-4C5C-8593-5663FAB89FE5}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Device.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TC_CableOrientation_Host.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\02_TC_CableOrientation_Host.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation.updg: Starting PD Generation
      • Waiting... [maximum 30000 ms]
      • Capture_Class::WaitForGenerationDone::Run custom function -> isGenDone = WaitGeneration_CableOrientation_USB2_Host(this, wait_time_msec, diff_time)
      • Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18361 wait_time_msec=30000
      • Pausing PD generation... 236 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Device.utg: Starting USB2 Generation
      • Board_Class::ResumePDGeneration() for CVS_0 : Serial#18361
      • Resuming PD generation... 2800 ms
      • Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18361 wait_time_msec=30000
      • Pausing PD generation... 13244 ms
      • Stopping USB2 Generation
      • Board_Class::ResumePDGeneration() for CVS_0 : Serial#18361
      • Resuming PD generation... 13468 ms
      • Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18361 wait_time_msec=30000
      • Pausing PD generation... 13680 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Device.utg: Starting USB2 Generation
      • Board_Class::ResumePDGeneration() for CVS_0 : Serial#18361
      • Resuming PD generation... 16276 ms
      • Board_Class::WaitForPDGenerationPause() for CVS_0 : Serial#18361 wait_time_msec=30000
      • Pausing PD generation... 26700 ms
      • Stopping USB2 Generation
      • Board_Class::ResumePDGeneration() for CVS_0 : Serial#18361
      • Resuming PD generation... 26920 ms
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=30000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 28372 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation_Device.rec: Stopping Recording at 28484 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 30116 ms
      • Check_Class::Verify() on Trace from CVS_0
      • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
      • Check_Class::Verify()::Executing AlwaysApplicable
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 16
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
      • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\Debug\1
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\TC_CableOrientation.vse: Running Verification Script
      • Running Verification script : TC_CableOrientation.vse
      • Running GetCableOrientationVseValues
      • Verification Result: PASSED
      • Capture_Class::UpdateTraceFileName(1)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\Preliminary\02_TC_CableOrientation_Host.usb: Saving trace file
      • Trace captured.
      • Default CC Line = CC_LINE_2
      • USB2 bMaxPacketSize = 64
      • USB2 BOS_Length = 64
      • USB2 Started = 1
      • CableDetection_Class::SaveOrientationResults()
      • UpdateVariableInFile::3
      • Update bMaxPacketSize in file CableVariables.ginc to 64
      • UpdateVariableInFile::3
      • Update BOS_Length in file CableVariables.ginc to 64
      • UpdateVariableInFile::3
      • Update IS_USB2_STARTED in file CableVariables.ginc to 1
      • UpdateVariableInFile::8
      • Update DEFAULT_CC_LINE in file CableVariables.ginc to CC_LINE_2
      • UpdateVariableInFile::8
      • Update DEFAULT_CC_LINE in file CableVariables.inc to CC_LINE_2
      • TC_CableDetection : Finished
        • CVS_Manager_Class::Release()::Number of connected boards: 1
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
        • Board_Class was destroyed
        • CVS_Manager_Class was destroyed
  • TD 4.1.1 Initial Voltage Test PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.1.1.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.1.1.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{B6E3B427-0D24-45A1-A68C-D62994B931E1}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Connection Tests\TD.4.1.1.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.1.1.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\01_TD.4.1.1.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Connection Tests\TD.4.1.1.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 5700 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Connection Tests\TD.4.1.1.rec: Stopping Recording at 5812 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 7544 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • Saving in the file Variables.inc
      • UpdateVariableInFile::8
      • Update VerificationID in file Variables.inc to ""
      • Saving VID_List array in the file Variables.inc
      • UpdateVariableInFile::8
      • Update VID_List in file Variables.inc to [["",0]]
      • Relevant CVS found on item 0
      • Check_Class::Verify() on Trace from CVS_0
      • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
      • Check_Class::Verify()::Check if any Bring-up has failed.
      • Check_Class::Verify()::Executing AlwaysApplicable
      • UpdateVariableInFile::3
      • Update CVS_ID in file CVS_Parameters.inc to 16
      • UpdateVariableInFile::2
      • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
      • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v1
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
      • Running Verification script : TD.4.1.1.vse
      • Running Update_PUT_Sources_VBUS
      • Verification Result: PASSED
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.1.1.V.2 n/a
        • Saving TD.4.1.1.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Verify_USB_PD_SUPPORT
        • >> This part is not applicable because PUT does not source VBUS.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.1.1.V.3 n/a
        • Saving TD.4.1.1.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Verify_TypeC_State_Machine
        • >> This part is not applicable because PUT does not source VBUS.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.1.1.V.4 n/a
        • Saving TD.4.1.1.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Verify_Captive_Cable
        • >> This part is not applicable because PUT does not source VBUS.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.1.1.V.5 n/a
        • Saving TD.4.1.1.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Verify_TypeC_Can_Act_as_Host
        • >> This part is not applicable because PUT does not source VBUS.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.1.1.V.6 n/a
        • Saving TD.4.1.1.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Verify_TypeC_Can_Act_as_Device
        • >> This part is not applicable because PUT does not source VBUS.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.1.1.V.7 pass
        • Saving TD.4.1.1.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V7_V12_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v7
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
        • Running Verification script : TD.4.1.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TD.4.1.1.V.8 pass
        • Saving TD.4.1.1.V.8 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.8"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.8",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V8_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v8
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
        • Running Verification script : TD.4.1.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TD.4.1.1.V.9 pass
        • Saving TD.4.1.1.V.9 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.9"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.9",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V9_V10_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v9
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
        • Running Verification script : TD.4.1.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TD.4.1.1.V.10 pass
        • Saving TD.4.1.1.V.10 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.10"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.10",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V9_V10_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v10
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
        • Running Verification script : TD.4.1.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TD.4.1.1.V.11 n/a
        • Saving TD.4.1.1.V.11 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.11"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.11",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V11_Applicability
        • >> This part is not applicable because PUT is not Sink-Capable.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #12
      • TD.4.1.1.V.12 pass
        • Saving TD.4.1.1.V.12 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.1.V.12"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.1.V.12",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V7_V12_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\Debug\1_c1v12
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.1.vse: Running Verification Script
        • Running Verification script : TD.4.1.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.1\01_TD.4.1.1.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.1.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 18 seconds
  • TD 4.1.2 Unpowered CC Voltage Test * PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Port_Battery_Powered = NO
      • Type_C_Power_Source = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.1.2.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.1.2.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Call Do_UnplugExternalPower
      • Waiting for user action ...
      • User action applied after 29296 ms
      • User claimed that external power is unplugged.
      • Board_Class::SetSyncGUID [{8070C3F7-BB94-4761-AAD9-E3121C14FD0A}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Connection Tests\TD.4.1.2.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.1.2.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.2\01_TD.4.1.2.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Connection Tests\TD.4.1.2.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2992 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Connection Tests\TD.4.1.2.rec: Stopping Recording at 3104 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4800 ms
      • Call Do_ReplugExternalPower
      • Waiting for user action ...
      • User action applied after 4168 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.1.2.V.1 n/a
        • Saving TD.4.1.2.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Check_V1_Applicability
        • >> VIF field 'Type_C_State_Machine' is not 'DRP'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.1.2.V.2 n/a
        • Saving TD.4.1.2.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V2_V4_V6_Applicability
        • >> This Part is only applicable for any device with 'Type_C_State_Machine' is DRP And 'TYPE_C_POWER_SOURCE' is 2 (BOTH).
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.1.2.V.3 pass
        • Saving TD.4.1.2.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V3_V5_V7_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.2\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.2.vse: Running Verification Script
        • Running Verification script : TD.4.1.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.1.2.V.4 n/a
        • Saving TD.4.1.2.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V2_V4_V6_Applicability
        • >> This Part is only applicable for any device with 'Type_C_State_Machine' is DRP And 'TYPE_C_POWER_SOURCE' is 2 (BOTH).
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.1.2.V.5 pass
        • Saving TD.4.1.2.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V3_V5_V7_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.2\Debug\1_c1v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.2.vse: Running Verification Script
        • Running Verification script : TD.4.1.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.1.2.V.6 n/a
        • Saving TD.4.1.2.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V2_V4_V6_Applicability
        • >> This Part is only applicable for any device with 'Type_C_State_Machine' is DRP And 'TYPE_C_POWER_SOURCE' is 2 (BOTH).
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.1.2.V.7 pass
        • Saving TD.4.1.2.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.1.2.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.1.2.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_V3_V5_V7_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.2\Debug\1_c1v7
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Connection Tests\TD.4.1.2.vse: Running Verification Script
        • Running Verification script : TD.4.1.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.1.2\01_TD.4.1.2.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.1.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 14 seconds
  • TD 4.1.3 Unpowered Cable Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
  • TD 4.2.1 Source Connect Sink Test FAIL
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • AddCondition:MaxConditionCounter = 2
    • AddCondition:MaxConditionCounter = 3
    • AddCondition:MaxConditionCounter = 4
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.1.C.1 fail
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.1.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 1
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_2
      • Running AtStart_func: IsPUT_R_Applicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{F024DD02-D3ED-44AB-988F-99CF509233DA}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.1.C.1.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\01_TD.4.2.1.C.1.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.1.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 5196 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Stopping Recording at 5304 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 7032 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.1.V.1 pass
        • Saving TD.4.2.1.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.1.V.2 pass
        • Saving TD.4.2.1.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_NOT_PUT_V_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.1.V.3 pass
        • Saving TD.4.2.1.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.1.V.4 pass
        • Saving TD.4.2.1.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.2.1.V.5 fail
        • Saving TD.4.2.1.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000037): The PUT does not apply Rp.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.2.1.V.6 fail
        • Saving TD.4.2.1.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000029): The PUT does not transition to Attached.SRC.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.2.1.V.7 n/a
        • Saving TD.4.2.1.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TD.4.2.1.V.8 n/a
        • Saving TD.4.2.1.V.8 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.8"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.8",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TD.4.2.1.V.9 n/a
        • Saving TD.4.2.1.V.9 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.9"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.9",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_9_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TD.4.2.1.V.10 n/a
        • Saving TD.4.2.1.V.10 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.10"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.10",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TD.4.2.1.V.11 n/a
        • Saving TD.4.2.1.V.11 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.11"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.11",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_11_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #12
      • TD.4.2.1.V.12 n/a
        • Saving TD.4.2.1.V.12 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.12"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.12",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #13
      • TD.4.2.1.V.13 n/a
        • Saving TD.4.2.1.V.13 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.13"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.13",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #14
      • TD.4.2.1.V.14 n/a
        • Saving TD.4.2.1.V.14 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.14"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.14",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_14_Applicability
        • >> This is only applicable for a PUT_V.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #15
      • TD.4.2.1.V.15 pass
        • Saving TD.4.2.1.V.15 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.15"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.15",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v15
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #16
      • TD.4.2.1.V.16 n/a
        • Saving TD.4.2.1.V.16 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.16"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.16",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #17
      • TD.4.2.1.V.17 pass
        • Saving TD.4.2.1.V.17 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.17"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.17",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\1_c1v17
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\01_TD.4.2.1.C.1_FAIL.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
    • TD.4.2.1.C.2 fail
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.1.C.2"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 2
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 2
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_3
      • Running AtStart_func: IsPUT_R_Applicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{8A800497-C648-4592-A230-24DCFF0CBAA0}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.1.C.2.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\02_TD.4.2.1.C.2.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.1.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 5168 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Stopping Recording at 5292 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 7008 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.1.V.1 pass
        • Saving TD.4.2.1.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.1.V.2 pass
        • Saving TD.4.2.1.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_NOT_PUT_V_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.1.V.3 pass
        • Saving TD.4.2.1.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.1.V.4 pass
        • Saving TD.4.2.1.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.2.1.V.5 fail
        • Saving TD.4.2.1.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000037): The PUT does not apply Rp.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.2.1.V.6 fail
        • Saving TD.4.2.1.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000029): The PUT does not transition to Attached.SRC.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.2.1.V.7 n/a
        • Saving TD.4.2.1.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TD.4.2.1.V.8 n/a
        • Saving TD.4.2.1.V.8 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.8"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.8",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TD.4.2.1.V.9 n/a
        • Saving TD.4.2.1.V.9 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.9"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.9",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_9_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TD.4.2.1.V.10 n/a
        • Saving TD.4.2.1.V.10 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.10"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.10",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TD.4.2.1.V.11 n/a
        • Saving TD.4.2.1.V.11 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.11"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.11",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_11_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #12
      • TD.4.2.1.V.12 n/a
        • Saving TD.4.2.1.V.12 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.12"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.12",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #13
      • TD.4.2.1.V.13 n/a
        • Saving TD.4.2.1.V.13 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.13"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.13",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #14
      • TD.4.2.1.V.14 n/a
        • Saving TD.4.2.1.V.14 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.14"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.14",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_14_Applicability
        • >> This is only applicable for a PUT_V.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #15
      • TD.4.2.1.V.15 pass
        • Saving TD.4.2.1.V.15 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.15"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.15",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v15
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #16
      • TD.4.2.1.V.16 n/a
        • Saving TD.4.2.1.V.16 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.16"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.16",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #17
      • TD.4.2.1.V.17 pass
        • Saving TD.4.2.1.V.17 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.17"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.17",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\2_c2v17
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\02_TD.4.2.1.C.2_FAIL.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
    • TD.4.2.1.C.3 fail
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.1.C.3"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 3
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 2
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_3
      • Running AtStart_func: IsPUT_R_Applicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{5D20AB7E-2452-4D54-AF04-C336E3230091}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.1.C.3.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\03_TD.4.2.1.C.3.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.1.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 5120 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.1.rec: Stopping Recording at 5232 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 6940 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.1.V.1 pass
        • Saving TD.4.2.1.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.1.V.2 pass
        • Saving TD.4.2.1.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_NOT_PUT_V_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.1.V.3 pass
        • Saving TD.4.2.1.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.1.V.4 pass
        • Saving TD.4.2.1.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.2.1.V.5 fail
        • Saving TD.4.2.1.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000037): The PUT does not apply Rp.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.2.1.V.6 fail
        • Saving TD.4.2.1.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse.Txt ...
        • Error(0x00000029): The PUT does not transition to Attached.SRC.
        • Verification Result: FAILED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.2.1.V.7 n/a
        • Saving TD.4.2.1.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TD.4.2.1.V.8 n/a
        • Saving TD.4.2.1.V.8 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.8"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.8",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TD.4.2.1.V.9 n/a
        • Saving TD.4.2.1.V.9 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.9"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.9",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_9_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #10
      • TD.4.2.1.V.10 n/a
        • Saving TD.4.2.1.V.10 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.10"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.10",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #11
      • TD.4.2.1.V.11 n/a
        • Saving TD.4.2.1.V.11 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.11"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.11",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_11_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #12
      • TD.4.2.1.V.12 n/a
        • Saving TD.4.2.1.V.12 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.12"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.12",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #13
      • TD.4.2.1.V.13 n/a
        • Saving TD.4.2.1.V.13 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.13"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.13",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #14
      • TD.4.2.1.V.14 n/a
        • Saving TD.4.2.1.V.14 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.14"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.14",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_14_Applicability
        • >> This is only applicable for a PUT_V.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #15
      • TD.4.2.1.V.15 pass
        • Saving TD.4.2.1.V.15 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.15"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.15",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v15
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #16
      • TD.4.2.1.V.16 n/a
        • Saving TD.4.2.1.V.16 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.16"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.16",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB3_Applicability
        • >> This is not applicable for a PUT that does not support USB3.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #17
      • TD.4.2.1.V.17 pass
        • Saving TD.4.2.1.V.17 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.1.V.17"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.1.V.17",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\Debug\3_c3v17
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.1.vse: Running Verification Script
        • Running Verification script : TD.4.2.1.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.1\03_TD.4.2.1.C.3_FAIL.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
    • TD.4.2.1.C.4 n/a
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.1.C.4"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 4
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • UpdateVariableInFile::2
      • Update TestPdRevision in file Variables.inc to 2
      • UpdateVariableInFile::8
      • Update SPEC_REV in file VendorInformation.ginc to PD_SPEC_REVISION_3
      • Running AtStart_func: IsPUT_C_Applicability(this)
      • Running ProcessResult:
      • Not Applicable: This is only applicable for a PUT_C.
      • Test_Class::DisconnectFromBoards()
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 55 seconds
  • TD 4.2.2 Source Connect SNKAS Test PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.2.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.2.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{8234FED6-E4B0-40FD-B6FB-08A0DC36DB42}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.2.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.2.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.2\01_TD.4.2.2.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.2.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2296 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.2.rec: Stopping Recording at 2404 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4164 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.2.V.1 pass
        • Saving TD.4.2.2.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.2.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.2.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_1_Applicability
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.2\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.2.vse: Running Verification Script
        • Running Verification script : TD.4.2.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.2.V.2 n/a
        • Saving TD.4.2.2.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.2.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.2.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_2_Applicability
        • >> This is only applicable for a PUT_C.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.2.V.3 pass
        • Saving TD.4.2.2.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.2.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.2.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.2\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.2.vse: Running Verification Script
        • Running Verification script : TD.4.2.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.2.V.4 pass
        • Saving TD.4.2.2.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.2.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.2.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.2\Debug\1_c1v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.2.vse: Running Verification Script
        • Running Verification script : TD.4.2.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.2\01_TD.4.2.2.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 12 seconds
  • TD 4.2.3 Source Connect DRP PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.3.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.3.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Condition_Class::ConfigConditionElements::GENERATION_FAIL_IGNORANCE -> True
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{6A38B832-8404-4795-85F3-D905C245F3F8}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.3.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.3.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.3\01_TD.4.2.3.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.3.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2580 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.3.rec: Stopping Recording at 2708 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4508 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.3.V.1 pass
        • Saving TD.4.2.3.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.3.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.3.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.3\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.3.vse: Running Verification Script
        • Running Verification script : TD.4.2.3.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.3.V.2 pass
        • Saving TD.4.2.3.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.3.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.3.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_UnattachedSRC
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.3\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.3.vse: Running Verification Script
        • Running Verification script : TD.4.2.3.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.3.V.3 n/a
        • Saving TD.4.2.3.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.3.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.3.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_AttachedSRC_AND_USB_PD_Supported
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.3\01_TD.4.2.3.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 13 seconds
  • TD 4.2.4 Source Connect Try.SRC DRP PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.4.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.4.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Condition_Class::ConfigConditionElements::GENERATION_FAIL_IGNORANCE -> True
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{471B965F-1012-4F94-BB4C-9B44B6F9E158}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.4.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.4.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\01_TD.4.2.4.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.4.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 3012 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.4.rec: Stopping Recording at 3124 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4920 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.4.V.1 pass
        • Saving TD.4.2.4.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.4.vse: Running Verification Script
        • Running Verification script : TD.4.2.4.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.4.V.2 pass
        • Saving TD.4.2.4.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_UnattachedSRC1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.4.vse: Running Verification Script
        • Running Verification script : TD.4.2.4.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.4.V.3 pass
        • Saving TD.4.2.4.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_AttachedSRC1
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.4.vse: Running Verification Script
        • Running Verification script : TD.4.2.4.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.4.V.4 pass
        • Saving TD.4.2.4.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_UnattachedSRC2
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\Debug\1_c1v4
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.4.vse: Running Verification Script
        • Running Verification script : TD.4.2.4.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.2.4.V.5 pass
        • Saving TD.4.2.4.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_UnattachedSRC2
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\Debug\1_c1v5
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.4.vse: Running Verification Script
        • Running Verification script : TD.4.2.4.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.2.4.V.6 n/a
        • Saving TD.4.2.4.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.4.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.4.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_AttachedSRC2_AND_USB_PD_Supported
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.4\01_TD.4.2.4.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 13 seconds
  • TD 4.2.5 Source Connect Try.SNK DRP PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.5.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.5.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Condition_Class::ConfigConditionElements::GENERATION_FAIL_IGNORANCE -> True
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{73DC0972-E0E0-4C0D-AD42-14B5AA6E5C01}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.5.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.5.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.5\01_TD.4.2.5.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.5.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2612 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.5.rec: Stopping Recording at 2720 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4496 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.5.V.1 pass
        • Saving TD.4.2.5.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.5.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.5.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.5\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.5.vse: Running Verification Script
        • Running Verification script : TD.4.2.5.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.5.V.2 pass
        • Saving TD.4.2.5.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.5.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.5.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.5\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.5.vse: Running Verification Script
        • Running Verification script : TD.4.2.5.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.5.V.3 n/a
        • Saving TD.4.2.5.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.5.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.5.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_AttachedSRC_AND_USB_PD_Supported
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.5\01_TD.4.2.5.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 12 seconds
  • TD 4.2.6 Source Connect Audio Accessory PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.6.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.6.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{90EBCAFF-F481-45A8-9650-3591A0D5EAC1}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.6.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.6.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.6\01_TD.4.2.6.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.6.UPDg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 3372 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.6.rec: Stopping Recording at 3480 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 5212 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.6.V.1 pass
        • Saving TD.4.2.6.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.6\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.6.vse: Running Verification Script
        • Running Verification script : TD.4.2.6.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.6.V.2 n/a
        • Saving TD.4.2.6.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsTypeC_Supports_Audio_Accessory
        • >> This is only applicable for any device with 'Type_C_Supports_Audio_Accessory' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.6.V.3 n/a
        • Saving TD.4.2.6.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsTypeC_Supports_Audio_Accessory
        • >> This is only applicable for any device with 'Type_C_Supports_Audio_Accessory' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.2.6.V.4 n/a
        • Saving TD.4.2.6.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsTypeC_Supports_Audio_Accessory
        • >> This is only applicable for any device with 'Type_C_Supports_Audio_Accessory' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.2.6.V.5 n/a
        • Saving TD.4.2.6.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsTypeC_Supports_Audio_Accessory
        • >> This is only applicable for any device with 'Type_C_Supports_Audio_Accessory' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.2.6.V.6 pass
        • Saving TD.4.2.6.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsNotTypeC_Supports_Audio_Accessory
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.6\Debug\1_c1v6
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.6.vse: Running Verification Script
        • Running Verification script : TD.4.2.6.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.2.6.V.7 n/a
        • Saving TD.4.2.6.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.6.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.6.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing MakeUnderImplementation
        • >> This is under development.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.6\01_TD.4.2.6.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 13 seconds
  • TD 4.2.7 Source Connect Debug Accessory FAIL
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.2.7.C.1 fail
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.2.7.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{BFEB8E99-5F17-4D0D-8360-8BFEE9A53F0D}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.7.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.2.7.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.7\01_TD.4.2.7.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source Tests\TD.4.2.7.UPDg: Starting PD Generation
      • Waiting... [maximum 15000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=15000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2328 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source Tests\TD.4.2.7.rec: Stopping Recording at 2436 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4232 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.2.7.V.1 pass
        • Saving TD.4.2.7.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.7.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.7.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.7\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.7.vse: Running Verification Script
        • Running Verification script : TD.4.2.7.vse
        • Running Do_UpdateVariables
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.2.7.V.2 n/a
        • Saving TD.4.2.7.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.7.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.7.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsTYPEC_Debug_Target_SRC
        • >> This is only applicable when VIF field TYPE_C_IS_DEBUG_TARGET_SRC = 'YES'
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.2.7.V.3 fail
        • Saving TD.4.2.7.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.2.7.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.2.7.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_IsNot_TYPEC_Debug_Target_SRC
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.7\Debug\1_c1v3
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.7.vse: Running Verification Script
        • Running Verification script : TD.4.2.7.vse
        • Running Do_Nothing_Sub_with_One_param
        • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source Tests\TD.4.2.7.vse.Txt ...
        • Error(0x00000010): The PUT sources VBUS after tCCDebounce expires.
        • Verification Result: FAILED
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.2.7\01_TD.4.2.7_FAIL.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.2.7 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 13 seconds
  • TD 4.2.8 Source Connect VCONN Accessory N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Attempts_Discov_SOP = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This is only applicable for a PUT_V.
    • Test_Class::IsReadyToRun()::result = 4
    • This is only applicable for a PUT_V.
    • TD.4.2.8 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.1 Sink Connect Source Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • ExtractVbusOffsetCompensation : VBUS_COMPENSATION value = 3
    • UpdateVariableInFile::5
    • Update VBUS_INITIAL_AFTER_COMPENSATION_mv in file Variables.ginc to 3703
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.2 Sink Connect DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.3 Sink Connect Try.SRC DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.4 Sink Connect Try.SNK DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.5 Sink Connect SNKAS Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Is_VCONN_Powered_Accessory = NO
      • Responds_To_Discov_SOP_UFP = 0XFF *
      • Responds_To_Discov_SOP_DFP = 0XFF *
      • Modal_Operation_Supported_SOP = 0XFF *
      • SVID_Fixed_SOP = 0XFF *
      • Num_SVIDs_Min_SOP = 0XFF *
      • Num_SVIDs_Max_SOP = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.3.6 Sink Connect Accessories Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.3.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.1 SNKAS Connect Source Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • ExtractVbusOffsetCompensation : VBUS_COMPENSATION value = 3
    • UpdateVariableInFile::5
    • Update VBUS_INITIAL_AFTER_COMPENSATION_mv in file Variables.ginc to 3703
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.2 SNKAS Connect DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.3 SNKAS Connect Try.SRC DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.4 SNKAS Connect Try.SNK DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.5 SNKAS Connect SNKAS Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Is_VCONN_Powered_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.6 SNKAS Connect Audio Accessory Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.7 SNKAS Connect Debug Accessory Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.7 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.4.8 SNKAS Connect Powered.Accessory Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_VCONN_Powered_Accessory = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK"
    • TD.4.4.8 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.1 DRP Connect Sink Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.2 DRP Connect SNKAS Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Is_VCONN_Powered_Accessory = NO
      • SOP_P_Capable = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.3 DRP Connect Source Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.4 DRP Connect DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • ExtractVbusOffsetCompensation : VBUS_COMPENSATION value = 3
    • UpdateVariableInFile::5
    • Update VBUS_INITIAL_AFTER_COMPENSATION_mv in file Variables.ginc to 3703
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.5 DRP Connect Try.SRC DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.5.6 DRP Connect Try.SNK DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.5.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.1 Try.SRC DRP Connect Source Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SRC = 0XFF *
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.2 Try.SRC DRP Connect DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.3 Try.SRC DRP Connect Try.SRC DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • ExtractVbusOffsetCompensation : VBUS_COMPENSATION value = 3
    • UpdateVariableInFile::5
    • Update VBUS_INITIAL_AFTER_COMPENSATION_mv in file Variables.ginc to 3703
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.4 Try.SRC DRP Connect Try.SNK DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.5 Try.SRC DRP Connect Sink Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.6.6 Try.SRC DRP Connect SNKAS Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Is_VCONN_Powered_Accessory = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.6.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.1 Try.SNK DRP Connect Source Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.2 Try.SNK DRP Connect DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • ExtractVbusOffsetCompensation : VBUS_COMPENSATION value = 3
    • UpdateVariableInFile::5
    • Update VBUS_INITIAL_AFTER_COMPENSATION_mv in file Variables.ginc to 3703
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Responds_To_Discov_SOP_UFP = NO *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.3 Try.SNK DRP Connect Try.SRC DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.4 Try.SNK DRP Connect Try.SNK DRP Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.5 Try.SNK DRP Connect Sink Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.7.6 Try.SNK DRP Connect SNKAS Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Is_VCONN_Powered_Accessory = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.7.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.8.1 DRP Connect Audio Accessory Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.8.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.8.2 DRP Connect Debug Accessory Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.8.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.8.3 DRP Connect Vconn Accessory Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Attempts_Discov_SOP = NO *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "DRP"
    • TD.4.8.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.9.1 Source Suspend Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Host_Suspend_Supported = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This is only applicable for a PUT_V.
    • Test_Class::IsReadyToRun()::result = 4
    • This is only applicable for a PUT_V.
    • TD.4.9.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.9.2 USB Type-C Current Advertisement Test PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • BC_1_2_Support = 2
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.9.2.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.9.2.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Condition_Class::ConfigConditionElements::GENERATION_FAIL_IGNORANCE -> True
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::Run() on CVS_0
      • Board_Class::SetSyncGUID [{25B20D27-702D-4D1C-A82F-1BA4B1DDB441}]
      • Board_Class::SetAnalyzerParameters (1, 3)
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source-Capable Tests\TD.4.9.2.rec: Starting Recording
      • RecordingOptions::ApplySettings()
      • RecordingOptions::ApplyTraceSettings()::[TD.4.9.2.usb]
      • RecordingOptions::ApplySettings()::SetTraceFileName ->C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.9.2\01_TD.4.9.2.usb
      • RecordingOptions::ApplyGeneralSettings()
      • RecordingOptions::ApplyCapturePowerMeasurement()
      • RecordingOptions::ApplyRecordingBufferSize()
      • RecordingOptions::ApplyExtTriggerInRecOption()
      • RecordingOptions::ApplyExtTriggerOutRecOption():: No change was applied!
      • RecordingOptions::ApplyExerciserConnectedName()::[Bosch-7901011-1][]
      • RecordingOptions::ApplyCaptureRawFile()
      • RecordingOptions::ApplyTypeCSettings()
      • RecordingOptions::ApplyCaptureCC_Traffic()
      • RecordingOptions::ApplyTypeCRoleSides()
      • ApplyTypeCRoleSides()::RO_SETTING_TC_DEVICE_ROLE = 1
      • RecordingOptions::ApplyUncertainSettingsTypeC()
      • Board_Class::StartRecording()
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\GEN\USB Type C - USBIF\Source-Capable Tests\TD.4.9.2.UPDg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • Waiting for Trigger...
      • Analyzer Trigged... 2604 ms
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\REC\USB Type C - USBIF\Source-Capable Tests\TD.4.9.2.rec: Stopping Recording at 2732 ms
      • Board_Class::StopRecordingAndWaitForTrace()
      • Board_Class::SetSyncGUID []
      • Trace is ready... 4556 ms
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.9.2.V.1 pass
        • Saving TD.4.9.2.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.9.2\Debug\1_c1v1
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source-Capable Tests\TD.4.9.2.vse: Running Verification Script
        • Running Verification script : TD.4.9.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.9.2.V.2 pass
        • Saving TD.4.9.2.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_BC_1_2_Support
        • UpdateVariableInFile::3
        • Update CVS_ID in file CVS_Parameters.inc to 16
        • UpdateVariableInFile::2
        • Update ERROR_ON_READING_CURRENT in file CVS_Parameters.inc to 10000
        • Making a copy from Intermediate folder to C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.9.2\Debug\1_c1v2
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\VSE\USB Type C - USBIF\Source-Capable Tests\TD.4.9.2.vse: Running Verification Script
        • Running Verification script : TD.4.9.2.vse
        • Running Do_Nothing_Sub_with_One_param
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.9.2.V.3 n/a
        • Saving TD.4.9.2.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_And_PD_Support
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.9.2.V.4 n/a
        • Saving TD.4.9.2.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.9.2.V.5 n/a
        • Saving TD.4.9.2.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.9.2.V.6 n/a
        • Saving TD.4.9.2.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #7
      • TD.4.9.2.V.7 n/a
        • Saving TD.4.9.2.V.7 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.7"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.7",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_PUT_R_And_PD_Support
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #8
      • TD.4.9.2.V.8 n/a
        • Saving TD.4.9.2.V.8 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.8"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.8",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #9
      • TD.4.9.2.V.9 n/a
        • Saving TD.4.9.2.V.9 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.9.2.V.9"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.9.2.V.9",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Check_USB_PD_Applicability
        • >> This is only applicable for any PUT with 'USB_PD_Support' = 'YES'.
        • Verification Result: N/A
        • C:\Users\Public\Documents\LeCroy\USBCompliance\Traces\20250922_155440\USB Type-C\TD.4.9.2\01_TD.4.9.2.usb: Saving trace file
        • Trace captured.
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.9.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 12 seconds
  • TD 4.9.3 Source PR_Swap Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a UUT that supports USB Power Delivery.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a UUT that supports USB Power Delivery.
    • TD.4.9.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.9.4 Source VCONN Swap Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • VCONN_Swap_To_Off_Supported = 0XFF *
      • VCONN_Swap_To_On_Supported = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a UUT that supports USB Power Delivery.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a UUT that supports USB Power Delivery.
    • TD.4.9.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.9.5 Source Alternate Modes Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Is_Alt_Mode_Controller = 0XFF *
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a UUT that supports USB Power Delivery.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a UUT that supports USB Power Delivery.
    • TD.4.9.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.1 Sink Power Sub-States Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Power_Source = 0
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • TD.4.10.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.2 Sink Power Precedence Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Power_Source = 0
      • BC_1_2_Support = 2
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • TD.4.10.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.3 Sink Suspend Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • BC_1_2_Support = 2
      • Num_Snk_PDOs = 0XFF *
      • PD_Power_As_Sink = 0XFF *
      • Type_C_Port_On_Hub = NO
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This is only applicable for any PUT that can act as UFP.
    • Test_Class::IsReadyToRun()::result = 4
    • This is only applicable for any PUT that can act as UFP.
    • TD.4.10.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.4 Sink PR_Swap Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for any device with 'Accepts_PR_Swap_As_Snk' = 'YES'.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for any device with 'Accepts_PR_Swap_As_Snk' = 'YES'.
    • TD.4.10.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.5 Sink VCONN_Swap Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • VCONN_Swap_To_Off_Supported = 0XFF *
      • VCONN_Swap_To_On_Supported = 0XFF *
      • Type_C_Supports_VCONN_Powered_Accessory = NO *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for any device with 'VCONN_Swap_To_On_Supported' = 'YES'.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for any device with 'VCONN_Swap_To_On_Supported' = 'YES'.
    • TD.4.10.5 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.10.6 Sink Alternate Mode Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • UpdateVariableInFile::8
    • Update Step_1_to_7_Completed in file Variables.ginc to NO
    • UpdateVariableInFile::8
    • Update Step_1_to_7_Completed in file Variables.inc to NO
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Sources_VCONN = NO
      • Type_C_Port_On_Hub = NO
      • SVID_Fixed_SOP = 0XFF *
      • Num_SVIDs_Min_SOP = 0XFF *
      • Num_SVIDs_Max_SOP = 0XFF *
      • Modal_Operation_Supported_SOP = 0XFF *
      • Accepts_PR_Swap_As_Src = 0XFF *
      • Accepts_PR_Swap_As_Snk = 0XFF *
      • Modal_Operation_Supported = 0XFF *
      • DR_Swap_To_UFP_Supported = 0XFF *
      • Hub_Billboard_DSPort_Num = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a UUT that supports USB Power Delivery.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a UUT that supports USB Power Delivery.
    • TD.4.10.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.11.1 DR_Swap Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • DR_Swap_To_DFP_Supported = 0XFF *
      • DR_Swap_To_UFP_Supported = 0XFF *
      • Num_Snk_PDOs = 0XFF *
      • PD_Specification_Revision = 0XFF *
      • Type_C_Sources_VCONN = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a UUT that supports USB Power Delivery.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a UUT that supports USB Power Delivery.
    • TD.4.11.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.11.2 Sink Dead Battery Test * PASS
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Port_Battery_Powered = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.ginc to 16
    • UpdateVariableInFile::3
    • Update AnalyzerID in file VendorInformation.inc to 16
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.ginc to 17
    • UpdateVariableInFile::17
    • Update BOARD_REV in file VendorInformation.inc to 17
    • UpdateVariableInFile::2
    • Update EXR_EPR_SUPPORT in file VendorInformation.ginc to 0
    • The test conditions are met and test is applicable to run.
    • Test_Class::IsCableMatched(VConn Pass-Thru)
    • PUT_CONNECTED = YES
    • DETECTED_CABLE_TYPE = VConn Pass-Thru
    • CABLE_DIRECTION = NORMAL
    • IS_USB2_STARTED = 1
    • bMaxPacketSize = 64
    • Cable is matched.
    • Successfully detected device role (0x1) according to the provided VIF.
    • Test_Class::IsReadyToRun()::result = 1
    • AddCondition:MaxConditionCounter = 1
    • Test_Class::ConnectToBoards()
    • Board_Class::OpenConnection() --> Already opened!
    • Test Preliminary procedures has started.
    • Calibrating VBUS current on Voyager (0) #18361 ...
    • Test Preliminary procedures has done.
    • TD.4.11.2.C.1 pass
      • Power Delivery Link initialization on Voyager #18361 : Running Generation
      • C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Common\InitPDLink.updg: Starting PD Generation
      • Waiting... [maximum 8000 ms]
      • Board_Class::WaitForPDGenerationIdle() for CVS_0 : Serial#18361 wait_time_msec=8000
      • Stopping PD Generation
      • UpdateVariableInFile::2
      • Update InitiateBringup in file Variables.ginc to 0
      • UpdateVariableInFile::8
      • Update ConditionID in file Variables.inc to "TD.4.11.2.C.1"
      • UpdateVariableInFile::2
      • Update ConditionNumber in file Variables.ginc to 1
      • UpdateVariableInFile::2
      • Update IsLoadTest in file Variables.inc to 0
      • Condition_Class::ConfigConditionElements::GENERATION_FAIL_IGNORANCE -> True
      • Running AtStart_func: CheckVconnApplicability(this)
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #0
      • Capture_Class::VerifyBatteryConnected on CVS_0
      • Waiting for user action ...
      • Operator claimed that a battery is not connected to the PUT.
      • Skipped running the Capture task due to output of VerifyBatteryConnected
      • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #1
      • TD.4.11.2.V.1 n/a
        • Saving TD.4.11.2.V.1 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.1"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.1",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Check_PortBatteryPoweredIsYES
        • >> This is not applicable because Operator claimed that a battery is not connected to the PUT.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #2
      • TD.4.11.2.V.2 pass
        • Saving TD.4.11.2.V.2 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.2"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.2",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing AlwaysApplicable
        • Check_Class::Verify()::Executing Check_PortBatteryPoweredIsNO
        • Verification Result: PASSED
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #3
      • TD.4.11.2.V.3 n/a
        • Saving TD.4.11.2.V.3 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.3"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.3",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_3_5_Applicability
        • >> This is not applicable because Operator claimed that a battery is not connected to the PUT.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #4
      • TD.4.11.2.V.6 n/a
        • Saving TD.4.11.2.V.6 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.6"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.6",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing IsSRC_TypeCStateMachine
        • >> This is not applicable because Operator claimed that a battery is not connected to the PUT.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #5
      • TD.4.11.2.V.4 n/a
        • Saving TD.4.11.2.V.4 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.4"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.4",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing IsNotSRC_TypeCStateMachine
        • >> This is not applicable because Operator claimed that a battery is not connected to the PUT.
        • Verification Result: N/A
        • Running CheckToEndCondition_func: Do_Return_False_with_One_param of Item #6
      • TD.4.11.2.V.5 n/a
        • Saving TD.4.11.2.V.5 in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VerificationID in file Variables.inc to "TD.4.11.2.V.5"
        • Saving VID_List array in the file Variables.inc
        • UpdateVariableInFile::8
        • Update VID_List in file Variables.inc to [["TD.4.11.2.V.5",0]]
        • Relevant CVS found on item 0
        • Check_Class::Verify() on Trace from CVS_0
        • Check_Class::Verify()::ErrorCode from relevant CVS = 0:
        • Check_Class::Verify()::Check if any Bring-up has failed.
        • Check_Class::Verify()::Executing Verify_3_5_Applicability
        • >> This is not applicable because Operator claimed that a battery is not connected to the PUT.
        • Verification Result: N/A
        • Running ProcessResult:
        • Test_Class::DisconnectFromBoards()
        • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
        • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
    • TD.4.11.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection() --> Already Closed!
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 9 seconds
  • TD 4.11.3 Captive Cable Power Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • PD_Specification_Revision = 0XFF *
      • VCONN_Swap_To_Off_Supported = 0XFF *
      • Product_Type = 0XFF *
      • Active_Cable_USB_Lanes = 0XFF *
      • Num_Snk_PDOs = 0XFF *
      • Num_Src_PDOs = 0XFF *
      • Modal_Operation_Supported = 0XFF *
      • Cable_Num_SVIDs_Max = 0XFF *
      • Cable_Termination_Type = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This is only applicable for a PUT_C.
    • Test_Class::IsReadyToRun()::result = 4
    • This is only applicable for a PUT_C.
    • TD.4.11.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.12.2 Hub Port Types Test * N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Port_On_Hub = NO
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This is only applicable for any device with 'Type_C_Port_On_Hub' = 'YES'.
    • Test_Class::IsReadyToRun()::result = 4
    • This is only applicable for any device with 'Type_C_Port_On_Hub' = 'YES'.
    • TD.4.12.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.13.1 DFP Enter_USB Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • USB4_DFP_Supported = 0XFF *
      • USB4_UFP_Supported = 0XFF *
      • USB4_PCIe_Tunneling_Supported = 0XFF *
      • USB4_DP_Tunneling_Supported = 0XFF *
      • USB4_TBT3_Compatibility_Supported = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a device with 'USB4_Supported' = 'YES'.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a device with 'USB4_Supported' = 'YES'.
    • TD.4.13.1 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.13.2 UFP Enter_USB Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • USB4_DP_Tunneling_Supported = 0XFF *
      • USB4_TBT3_Compatibility_Supported = 0XFF *
      • USB4_UFP_Supported = 0XFF *
      • USB4_DFP_Supported = 0XFF *
      • Type_C_Port_On_Hub = NO
      • Num_SVIDs_Max_SOP = 0XFF *
      • Modal_Operation_Supported_SOP = 0XFF *
      • Hub_Billboard_DSPort_Num = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • TD.4.13.2 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.13.3 DFP Data_Reset Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • USB4_DFP_Supported = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable for a device with 'USB4_Supported' = 'YES'.
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable for a device with 'USB4_Supported' = 'YES'.
    • TD.4.13.3 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.13.4 UFP Data_Reset Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Type_C_Port_On_Hub = NO
      • Hub_Billboard_DSPort_Num = 0XFF *
      • USB4_UFP_Supported = 0XFF *
      • USB4_DFP_Supported = 0XFF *
      • VCONN_Swap_To_On_Supported = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • Test_Class::IsReadyToRun()::result = 4
    • This test is only applicable while Type_C_State_Machine = "SNK" "DRP"
    • TD.4.13.4 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.13.5 Cable EnterUSB and Data Reset Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
  • TD 4.13.6 Emarker Silicon EnterUSB and Data Reset Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\Variables.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.inc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformation.ginc ...
    • Deleting file C:\Users\Public\Documents\LeCroy\USBCompliance\Scripts\Intermediate\VendorInformationExtra.ginc ...
    • VIF initiated successfully!
    • CVS_Manager_Class was created
    • CVS_Manager_Class::Initialize::Number of connected boards: 1
    • Argument(2)=18361
    • Argument(3)=0
    • Board_Class was created
    • Board_Class::ReadBoardInfo() for serial number #18361
    • Creating Automation Object ...
    • Binding Voyager #0 with Serial #18361
    • Board_Class::OpenConnection() [CVS_0]
    • Board Name=Voyager M310P
    • BoardID=130
    • BoardRev=17
    • Serial=#18361
    • PD EPR Support=0
    • VIF Extraction
      • Extracting from component "2" of file "F:Bosch__7901011__C-sample__1.xml" ...
      • VIF_Product_Type = 0
      • PD_Port_Type = 0XFF *
      • Connector_Type = 2
      • USB_PD_Support = NO
      • Type_C_State_Machine = 0
      • Captive_Cable = NO
      • Captive_Cable_Is_eMarked = 0xFF *
      • USB4_Supported = NO
      • Type_C_Can_Act_As_Device = NO
      • Type_C_Is_Alt_Mode_Adapter = 0xFF *
      • Device_Supports_USB_Data = 0xFF *
      • Device_Speed = 0XFF *
      • Device_Max_USB2_Speed = 0XFF *
      • USB4_Max_Speed = 0XFF *
      • Type_C_Can_Act_As_Host = YES
      • Host_Supports_USB_Data = YES
      • Host_Speed = 0
      • Certification_Type = 0
      • SOP_PP_Capable = 0XFF *
      • Product_Type = 0XFF *
      • Modal_Operation_Supported = 0XFF *
      • Cable_Num_SVIDs_Max = 0XFF *
      • Cable_Termination_Type = 0XFF *
      • Cable_VBUS_Current = 0XFF *
      • Type_C_Supports_Audio_Accessory = NO
      • Type_C_Supports_Vconn_Powered_Accessory = 0XFF *
      • Type_C_Is_Debug_Target_SRC = NO
      • Type_C_Is_Debug_Target_SNK = 0XFF *
      • Type_C_Implements_Try_SRC = 0XFF *
      • Type_C_Implements_Try_SNK = 0XFF *
      • Host_Is_Embedded = YES
    • Successfully finished VIF Extraction.
    • >> Valid VIF_PRODUCT_TYPE for this TD : "Cable"
    • Test_Class::IsReadyToRun()::result = 4
    • Valid VIF_PRODUCT_TYPE for this TD : "Cable"
    • TD.4.13.6 : Finished
      • CVS_Manager_Class::Release()::Number of connected boards: 1
      • Board_Class::CloseConnection()::AutomationObj.SetAnalyzerParameters(1,0)
      • Board_Class::CloseConnection() Successfully for CVS_0 to #18361
      • Board_Class was destroyed
      • CVS_Manager_Class was destroyed
    • Test Elapsed Time: 0 minute(s) and 2 seconds
  • TD 4.14.1 Cable Vconn Swap Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
  • TD 4.14.2 Cable Reset Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
  • TD 4.14.3 Cable Alternate Mode Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
  • TD 4.14.4 Cable USB 3.2 Test N/A
    • Teledyne LeCroy USB Compliance Suite Version: 8.13 Build 1234
    • >> This test requires two Voyager units to be connected.
    • Test Elapsed Time: 0 minute(s) and 0 seconds
      • Disconnecting CC lines ... #18361
      • Switching to Analyzer mode ... #18361