* Created: Tue May 28 10:30:52 CST 2024
*
* Format: Register Name  tab Character,\t  Hexadecimal register value.
* Device: bq25895M
* BQZ Container: Charger_1_00-bq25895M.bqz
*
Input Current Limit, HIZ and ILIM pin	7F
OTG Temperature thresholds, and Input Voltage DPM Offset	1F
ADC controls, OTG Frequency, ICO, DCP, and Input Detection	F1
Battery Load, WDT Reset periods, OTG and Charge Enable, and MINSYS setting	3A
Fast Charge Current Limit settings and MTK Pump enable	10
Pre-charge and Termination Current Limit settings	10
Charge Voltage Regulation Limit, Battery Low Voltage and Recharge threshold	56
Termination Current Enable, STAT pin, WDT, Safety Timer, and JEITA Charge Current	CD
IR Compensation and Thermal Regulation thresholds	D3
ICO, Extended Safety Timer, BATFET control, MTK Pump Voltage, and JEITA Charge Voltage	40
OTG Regulation Voltage and Current Limit settings	93
Charger VBUS, Charging Mode, PG, USB Input, and System Voltage Regulation status	7E
WDT, OTG/VBUS OVP, Thermal Shutdown, Safety Timer, and TS pin faults	00
Input Voltage DPM settings	23
Thermal Regulation Charge Status, and ADC Battery Voltage conversion	5C
ADC System Voltage conversion	5E
ADC TS pin voltage as percentage of REGN conversion	54
VBUS status, and ADC VBUS Voltage conversion	E0
ADC Charge Current conversion	00
DPM status, and Input Current Limit setting	3F
Registers reset, Input Current Optimizer status, Device ID, and Temperature Profile	3A