Date and time |
Thursday, 3 October 2024 17:19:29 GMT-5 |
Vendor |
Promise Technology, Inc. |
Product |
Pegasus R12 |
Product revision |
1 |
Test ID |
0 |
Component Under Test |
1 |
Port Label |
1 |
Generator used |
Ellisys USB Explorer 350 (EX350-62046) |
Analyzer used |
None |
Software version |
Report generated with version 3.1.8999 |
Overall result |
Errors encountered |
Test status |
Last updated on |
||
Merged USB PD Protocol Tests for Source UUTs (PD2 and PD3 Mode) |
Passed with failed checks |
||
Passed with failed checks |
Stable |
2024-08-21 |
|
Merged USB PD Protocol VDM Tests for Source UUTs (PD2 and PD3 Mode) |
Passed with failed checks |
||
Passed with failed checks |
Stable |
2024-08-21 |
|
Merged USB PD Protocol VDM Tests for Sink UUTs (PD2 and PD3 Mode) |
Errors encountered |
||
Errors encountered |
Stable |
2024-08-21 |
|
Passed |
Stable |
2024-08-21 |
|
Passed |
|||
» TEST.PD.USB4.EUSB.1 Enter_USB command response of UFP UUT-Valid Mode |
Passed |
Alpha |
2024-08-21 |
» TEST.PD.USB4.EUSB.2 Enter_USB command response of UFP UUT-Invalid Mode |
Passed |
Alpha |
2024-08-21 |
» TEST.PD.USB4.EUSB.3 USB4 DFP Connected to USB4 UFP using an Active Cable |
Not Applicable |
Alpha |
2024-08-21 |
» TEST.PD.USB4.EUSB.4 DR_Swap after Entering USB4 Mode entry |
Not Applicable |
Alpha |
2024-08-21 |
|
|
||
Failed |
|
||
Failed |
|
Test suite overall result |
Passed with failed checks |
TEST.PD.PROT.SRC.8 VCONN_Swap Response - Testing Downstream Port |
||
PASSED |
PD2 Mode - Sending VCONN_Swap |
The UUT shall only reply with an Accept message when VCONN_Swap_To_Off_Supported is 1 (TEST.PD.PROT.SRC.8#1) |
PASSED |
PD2 Mode - Sending VCONN_Swap |
The UUT shall turn off VConn within tVCONNSourceOff (TEST.PD.PROT.SRC.8#2) |
PASSED |
PD2 Mode - Sending VCONN_Swap |
The UUT shall only reply with an Accept message when VCONN_Swap_To_On_Supported is 1 (TEST.PD.PROT.SRC.8#3) |
PASSED |
PD2 Mode - Sending VCONN_Swap |
The UUT shall reply with a PS_RDY within tVCONNSourceTimeout min (TEST.PD.PROT.SRC.8#4) |
PASSED |
PD3 Mode - Sending VCONN_Swap |
The UUT shall only reply with an Accept message when VCONN_Swap_To_Off_Supported is 1 (TEST.PD.PROT.SRC.8#1) |
PASSED |
PD3 Mode - Sending VCONN_Swap |
The UUT shall turn off VConn within tVCONNSourceOff (TEST.PD.PROT.SRC.8#2) |
PASSED |
PD3 Mode - Sending VCONN_Swap |
The UUT shall only reply with an Accept message when VCONN_Swap_To_On_Supported is 1 (TEST.PD.PROT.SRC.8#3) |
PASSED |
PD3 Mode - Sending VCONN_Swap |
The UUT shall reply with a PS_RDY within tVCONNSourceTimeout min (TEST.PD.PROT.SRC.8#4) |
CHECK |
Global Checks |
Global Checks failed |
Test suite overall result |
Passed with failed checks |
TEST.PD.VDM.SRC.1 Discovery Process and Enter Mode - Testing Downstream Port |
||
PASSED |
PD2 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Reponder NAK or ignore the message (TEST.PD.VDM.SRC.1#1) |
PASSED |
PD2 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Reponder NAK if it supports structured VDM (TEST.PD.VDM.SRC.1#1) |
PASSED |
PD2 Mode - Sending Attention |
The UUT shall not respond with a structured VDM message (TEST.PD.VDM.SRC.1#4) |
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Discover ID Response message or Not_Supported (TEST.PD.VDM.SRC.1#2) |
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Respnder ACK if Responds_To_Discov_SOP_DFP = YES (TEST.PD.VDM.SRC.1#2) |
PASSED |
PD3 Mode - Checking ID Header |
Data_Capable_as_USB_Host_SOP declared as 1, actual was 1 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
Data_Capable_as_USB_Device_SOP declared as 1, actual was 1 (TEST.PD.VDM.SRC.1) |
PASSED |
PD3 Mode - Checking ID Header |
Product_Type_UFP_SOP declared as 2, actual was 2 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
Modal_Operation_Supported_SOP declared as 1, actual was 1 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
Product_Type_DFP_SOP declared as 1, actual was 1 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
ID_Header_Connector_Type_SOP declared as 2, actual was 2 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
Bits 22-16 shall be all 0 (Reserved) (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking ID Header |
USB_VID_SOP declared as 0x4e5, actual was 0x4e5 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking Cert Stat VDO |
XID_SOP declared as 0x0, actual was 0x0 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking Product VDO |
PID_SOP declared as 0x43, actual was 0x43 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Checking Product VDO |
bcdDevice_SOP declared as 0x714, actual was 0x714 (TEST.PD.VDM.SRC.1#3) |
PASSED |
PD3 Mode - Sending Attention |
The UUT shall not respond with a structured VDM message (TEST.PD.VDM.SRC.1#4) |
CHECK |
Global Checks |
Global Checks failed |
Test suite overall result |
Errors encountered |
TEST.PD.VDM.SNK.1 Discovery Process and Enter Mode - Testing Upstream Port |
||
PASSED |
PD2 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Discover ID Response message or Not_Supported, or ignore the message (TEST.PD.VDM.SNK.1#1) |
PASSED |
PD2 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Respnder ACK if Responds_To_Discov_SOP_UFP = YES (TEST.PD.VDM.SNK.1#1) |
INFO |
PD2 Mode - Checking ID Header |
UUT is a PDUSB Peripheral (UFP) |
PASSED |
PD2 Mode - Checking ID Header |
Number Of DataObjects shall be 4, actual 4 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking ID Header |
Data_Capable_as_USB_Host_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking ID Header |
Data_Capable_as_USB_Device_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking ID Header |
Product_Type_UFP_SOP declared as 2, actual was 2 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking ID Header |
Modal_Operation_Supported_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking ID Header |
Bits 25-16 shall be all 0 (Reserved) (TEST.PD.VDM.SNK.1#2) |
PASSED |
PD2 Mode - Checking ID Header |
USB_VID_SOP declared as 0x4e5, actual was 0x4e5 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking Cert Stat VDO |
XID_SOP declared as 0x0, actual was 0x0 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking Product VDO |
PID_SOP declared as 0x43, actual was 0x43 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Checking Product VDO |
bcdDevice_SOP declared as 0x714, actual was 0x714 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD2 Mode - Discover SVIDs |
The UUT shall respond with a Reponder ACK if Modal_Operation_Supported_SOP = Yes (TEST.PD.VDM.SNK.1#3) |
PASSED |
PD2 Mode - Discover SVIDs |
Num1 SVID shall be 0x8087, actual 0x8087 (TEST.PD.VDM.SNK.1#4) |
INFO |
PD2 Mode - Discover Modes |
Unexpect message MessageType = 10, IsControl 1, Message ID received 3, Message ID sent 5 |
ERROR |
PD2 Mode - Discover Modes |
GoodCRC not received |
PASSED |
PD2 Mode - Discover Modes |
Num2 SVID shall be 0xff01, actual 0xff01 (TEST.PD.VDM.SNK.1#4) |
INFO |
PD2 Mode - Discover Modes |
Unexpect message MessageType = 10, IsControl 1, Message ID received 3, Message ID sent 5 |
ERROR |
PD2 Mode - Discover Modes |
GoodCRC not received |
PASSED |
PD2 Mode - Discover Modes |
The last SVID shall be 0, actual 0x0 (TEST.PD.VDM.SNK.1#4) |
PASSED |
PD2 Mode - Checking SVIDs |
The UUT shall return a number of SVIDs in between 2 and 2, actual 2 (TEST.PD.VDM.SNK.1#4) |
INFO |
PD2 Mode - Sending Attention |
Unexpect message MessageType = 10, IsControl 1, Message ID received 3, Message ID sent 5 |
ERROR |
PD2 Mode - Sending Attention |
GoodCRC not received |
PASSED |
PD2 Mode - Sending Attention |
The UUT shall not respond with a structured VDM message (TEST.PD.VDM.SNK.1#7) |
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Discover ID Response message or Not_Supported, or ignore the message (TEST.PD.VDM.SNK.1#1) |
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT shall respond with a Respnder ACK if Responds_To_Discov_SOP_UFP = YES (TEST.PD.VDM.SNK.1#1) |
INFO |
PD3 Mode - Checking ID Header |
UUT is a PDUSB Peripheral (UFP) |
INFO |
PD3 Mode - Checking ID Header |
UUT is a PDUSB Hub (DFP) |
FAILED |
PD3 Mode - Checking ID Header |
Number Of DataObjects shall be 7, actual 5 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Data_Capable_as_USB_Host_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Data_Capable_as_USB_Device_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Product_Type_UFP_SOP declared as 2, actual was 2 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Modal_Operation_Supported_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Product_Type_DFP_SOP declared as 1, actual was 1 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
ID_Header_Connector_Type_SOP declared as 2, actual was 2 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking ID Header |
Bits 20-16 shall be all 0 (Reserved) (TEST.PD.VDM.SNK.1#2) |
PASSED |
PD3 Mode - Checking ID Header |
USB_VID_SOP declared as 0x4e5, actual was 0x4e5 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking Cert Stat VDO |
XID_SOP declared as 0x0, actual was 0x0 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking Product VDO |
PID_SOP declared as 0x43, actual was 0x43 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Checking Product VDO |
bcdDevice_SOP declared as 0x714, actual was 0x714 (TEST.PD.VDM.SNK.1 #2) |
PASSED |
PD3 Mode - Discover SVIDs |
The UUT shall respond with a Reponder ACK if Modal_Operation_Supported_SOP = Yes (TEST.PD.VDM.SNK.1#3) |
PASSED |
PD3 Mode - Discover SVIDs |
Num1 SVID shall be 0x8087, actual 0x8087 (TEST.PD.VDM.SNK.1#4) |
PASSED |
PD3 Mode - Discover Modes |
SVID shall be 0x8087, actual 0x8087 (TEST.PD.VDM.SNK.1#5) |
PASSED |
PD3 Mode - Discover Modes |
The UUT shall return a number of Modes in between 1 and 1, actual 1 (TEST.PD.VDM.SNK.1#5) |
PASSED |
PD3 Mode - Enter Mode |
The UUT shall respond with a Responder ACK or NAK (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Enter Mode |
The UUT shall respond with a Responder ACK if SVID1_Mode1_Enter_SOP = Yes (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Exit Mode |
The UUT shall respond with a Responder ACK (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Exit Mode |
Num2 SVID shall be 0xff01, actual 0xff01 (TEST.PD.VDM.SNK.1#4) |
PASSED |
PD3 Mode - Discover Modes |
SVID shall be 0xff01, actual 0xff01 (TEST.PD.VDM.SNK.1#5) |
PASSED |
PD3 Mode - Discover Modes |
The UUT shall return a number of Modes in between 1 and 1, actual 1 (TEST.PD.VDM.SNK.1#5) |
PASSED |
PD3 Mode - Enter Mode |
The UUT shall respond with a Responder ACK or NAK (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Enter Mode |
The UUT shall respond with a Responder ACK if SVID2_Mode1_Enter_SOP = Yes (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Exit Mode |
The UUT shall respond with a Responder ACK (TEST.PD.VDM.SNK.1#6) |
PASSED |
PD3 Mode - Exit Mode |
The last SVID shall be 0, actual 0x0 (TEST.PD.VDM.SNK.1#4) |
PASSED |
PD3 Mode - Checking SVIDs |
The UUT shall return a number of SVIDs in between 2 and 2, actual 2 (TEST.PD.VDM.SNK.1#4) |
PASSED |
PD3 Mode - Sending Attention |
The UUT shall not respond with a structured VDM message (TEST.PD.VDM.SNK.1#7) |
TEST.PD.VDM.SNK.7 Unrecognized VID in Unstructured VDM - Testing Upstream Port |
||
PASSED |
PD2 Mode - Waiting for Response |
The UUT shall ignore the message (TEST.PD.VDM.SNK.7#1) |
PASSED |
PD3 Mode - Waiting for Response |
The UUT shall send a Not_Supported (TEST.PD.VDM.SNK.7#1) |
Test suite overall result |
Passed |
TEST.PD.USB4.EUSB.1 Enter_USB command response of UFP UUT-Valid Mode - Testing Upstream Port |
||
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT Shall reply with Responder ACK (TEST.PD. USB4.EUSB.1#3) |
PASSED |
PD3 Mode - Sending EnterUsb |
PUT shall respond with Accept message (TEST.PD. USB4.EUSB.1#4) |
PASSED |
PD3 Mode - Sending EnterUsb |
PUT shall respond with Accept message (TEST.PD. USB4.EUSB.1#5) |
TEST.PD.USB4.EUSB.2 Enter_USB command response of UFP UUT-Invalid Mode - Testing Upstream Port |
||
PASSED |
PD3 Mode - Sending DiscoverIdentity |
The UUT Shall reply with Responder ACK (TEST.PD. USB4.EUSB.2#3) |
PASSED |
PD3 Mode - Sending EnterUsb |
PUT shall respond with Reject message (TEST.PD. USB4.EUSB.2#4) |
TEST.PD.USB4.EUSB.3 USB4 DFP Connected to USB4 UFP using an Active Cable - Testing Downstream Port |
||
SKIPPED |
Running Test |
Test is applicable to USB4 DFPs only |
TEST.PD.USB4.EUSB.4 DR_Swap after Entering USB4 Mode entry - Testing Upstream Port |
||
SKIPPED |
PD3 Mode: Setting up Contract |
Test is applicable only when both USB4_UFP_Supported and USB4_DFP_Supported are yes |
Overall result |
Failed |
COMMON.CHECK.PD.7 |
||
FAILED |
TEST.PD.VDM.SRC.1 |
Checking SourceCapabilities Message (Message ID 0): UUT has a PDP > 27W shall have SPR AVS PDO (COMMON.CHECK.PD.7#7 x 2) |
FAILED |
TEST.PD.PROT.SRC.8 |
Checking SourceCapabilities Message (Message ID 0): UUT has a PDP > 27W shall have SPR AVS PDO (COMMON.CHECK.PD.7#7 x 2) |