import gc
from mDevice import Device
import resourceFiles
reload(resourceFiles)
import HSCEngines
reload(HSCEngines)
import HSCProcesses
reload(HSCProcesses)

from HSCEngines import HSCEngineWithILDDCDGC
from HSCProcesses import HSCProcessWithILDDCDGC
from mConnect import Connect

if boardType not in ["AFE79FMC"]:
	try:
		import mPowerCard
		reload(mPowerCard)
		from mPowerCard import PowerCard
		pc = PowerCard(tag = "Power Card", addr = usbHandleName+" D", Board_num = boardType)
		pc.reset = True
		pc.defaults = True
	except:
		pc=None
		pass
else:
	pc = None
	
if simulationMode==False:
	if boardType not in ["AFE79FMC"]:
		if not useMpsse:
			adcregProg.addressLen=16
			adcregProg.packetLen = 24
			adcregProg.pin0 = 0
			adcregProg.pin1 = 1
			adcregProg.pin2 = 6
			adcregProg.pin3 = 2
			adcregProg.pin4 = 4
			adcregProg.pin5 = 4
			adcregProg.pin6 = 4
			adcregProg.pin7 = 4
			adcregProg.clkEdge=1
			adcregProg.msbFirst = 1
		
		lmkregProg.addressLen=16
		lmkregProg.packetLen = 24
		lmkregProg.pin0 = 5
		lmkregProg.pin1 = 5
		lmkregProg.pin2 = 5
		lmkregProg.pin3 = 5
		lmkregProg.pin4 = 6
		lmkregProg.pin5 = 2
		lmkregProg.pin6 = 0
		lmkregProg.pin7 = 1
		lmkregProg.msbFirst = 1
		lmkregProg.clkEdge = 1
		if cpldInstalled:
			cpldRegProg.addressLen=16
			cpldRegProg.packetLen = 24
			cpldRegProg.pin0 = 5
			cpldRegProg.pin1 = 5
			cpldRegProg.pin2 = 5
			cpldRegProg.pin3 = 5
			cpldRegProg.pin4 = 0
			cpldRegProg.pin5 = 1
			cpldRegProg.pin6 = 6
			cpldRegProg.pin7 = 2
			cpldRegProg.msbFirst = 1
			cpldRegProg.clkEdge = 1
		
		cRegProg.pin2 = 5 
	else:
		lmkregProg.addressLen=16
		lmkregProg.packetLen = 24
		lmkregProg.pin0 = 5
		lmkregProg.pin1 = 5
		lmkregProg.pin2 = 2
		lmkregProg.pin3 = 0
		lmkregProg.pin4 = 1
		lmkregProg.pin5 = 6
		lmkregProg.pin6 = 5
		lmkregProg.pin7 = 5
		lmkregProg.msbFirst = 1
		lmkregProg.clkEdge = 1

	try:
		import j58Wrapper
		reload(j58Wrapper)
		from j58Wrapper import j58WrapperClass
		myfpga=j58WrapperClass()
		if boardType in ["AFE79FMC"]:
			from j58Wrapper import j58SpiWrapper
			myfpgaSpi = j58SpiWrapper(myfpga)
		else:
			myfpgaSpi = ""
	except:
		error("Reset the FPGA and rerun devInit.py")
		raise
else:
	try:
		import j58Wrapper
		reload(j58Wrapper)
		from j58Wrapper import j58WrapperClass
		myfpga=j58WrapperClass()
	except:
		myfpga=""
		myfpgaSpi=""
		
import mAfe78xxDeviceWrapper
reload(mAfe78xxDeviceWrapper)

import mlmkDevice
reload(mlmkDevice)
import globalDefs as Globals

import mCpld
reload(mCpld)

if boardType not in ["AFE79FMC"]:
	device=mAfe78xxDeviceWrapper.afe78xxDeviceWrapper(fileName=Globals.libFolderPath+"//"+"resourceFiles//"+Afe79xxLibraries.folderDirDict[folderName]['dmlName'],regProgDevice=adcregProg,name='DONOT_OPEN_Atharv_FULL')
else:
	device=mAfe78xxDeviceWrapper.afe78xxDeviceWrapper(fileName=Globals.libFolderPath+"//"+"resourceFiles//"+Afe79xxLibraries.folderDirDict[folderName]['dmlName'],regProgDevice=myfpgaSpi,name='DONOT_OPEN_Atharv_FULL')
lmk=mlmkDevice.LMK(name="LMK Clock Divider",fileName=Globals.libFolderPath+"//resourceFiles//"+"LMK04828_form_new.dml",regProgDevice=lmkregProg)
lmk.setResetProperty(lmk.head.page.System.Top_Modes._SW_RESET)
print("LMK configured")
if boardType not in ["AFE79FMC"]:
	cpld=Device(fileName=Globals.libFolderPath+"//"+"resourceFiles//EvmCpld.dml",regProgDevice=cpldRegProg,name='CPLD')
	cpld.logEn=False
else:
	cpld = None
lmk.logEn=False


#### clk sources
clkSource.frequency=2e9
clkSource.amplitude=10
clkSource.on=1

DevClkSource.frequency=491.52e6
DevClkSource.amplitude=10
DevClkSource.on=1

process=HSCProcessWithILDDCDGC()
engine=HSCEngineWithILDDCDGC(device=myfpga,process=process,clockVariable=clkSource._frequency,inputVariable=sigSource._frequency)

if simulationMode==True or useMpsse==True:
	device.delay=0
else:
	device.delay=0.015
	myfpga.byte_swap=0

import mLogDump
reload(mLogDump)
logDumpInst=mLogDump.logDump(ASTERIX_DIR+DEVICES_DIR+r"\AFE79xxConfig.txt")
device.logClassInst=logDumpInst

from mSetupParams import setupParams
from mSetupParams import fpgaParamsClass
fpgaParams=fpgaParamsClass()
from mSetupParams import lmkParamsClass
lmkParams=lmkParamsClass()

import mLmk
reload(mLmk)
from mLmk import lmkLib
LMKlibInst=lmkLib(lmk,lmkParams)

import mFPGA_J58
reload(mFPGA_J58)
from mFPGA_J58 import fpgaLib_J58
FPGAlibInst=fpgaLib_J58(myfpga,fpgaParams)

import mAfeCTestWrapper
reload(mAfeCTestWrapper)
from mAfeCTestWrapper import afeCTestWrapper
CAFE=afeCTestWrapper(device,usbHandleName+" A",device.regProgDevice,"libCAfe79xxPG1px.dll")


CAFE.dllInst.init_tiAfe79DeviceInfo_t()
CAFE.setAfeLogLvl(0,3)

if simulationMode==True:
	CAFE.dllInst.setAfeLibsRunMode(1)
else:
	CAFE.dllInst.setAfeLibsRunMode(0)

setupParams.CAFE=CAFE

setupParams.fpgaLib=FPGAlibInst
setupParams.FPGA=FPGAlibInst
setupParams.lmkLib=LMKlibInst
setupParams.simulationMode=simulationMode
setupParams.cpldRegs=cpld
setupParams.process=process
setupParams.engine=engine
setupParams.boardType=boardType

import mFuncDecorator
reload(mFuncDecorator)
from mFuncDecorator import *
def loadLibs(dutNo=0):
	import mAfeConstants
	reload(mAfeConstants)
	from mAfeConstants import *
	
	import mAfeParameters
	reload(mAfeParameters)
	from mAfeParameters import systemParams
	from mAfeParameters import systemStatus
	
	import mAfeLibrary
	reload(mAfeLibrary)
	from mAfeLibrary import afe78xxLibrary
	
	device1Refs=deviceRefs()
	sysParams=systemParams()
	sysStatus=systemStatus()
	
	sysParams.chipId=chipId
	sysParams.chipVersion=chipVersion
	
	device1Refs.device=device
	device1Refs.process=process
	device1Refs.lmkRegs=lmk
	device1Refs.engine=engine
	device1Refs.systemParams=sysParams
	device1Refs.systemStatus=sysStatus
	device1Refs.lmkParams=lmkParams
	device1Refs.fpgaRegs=myfpga
	device1Refs.hwResetPin=cRegProg
	afeInst=afe78xxLibrary(device1Refs,dutNo)
	afeInst.FPGA=FPGAlibInst
	afeInst.LMK=LMKlibInst
	setupParams.dutInstances=[afeInst,]
	
	if dutNo==0:
		import mCpld
		reload(mCpld)
		from mCpld import cpldLib
		CPLDLibInst=cpldLib(cpld,sysStatus)
		setupParams.CPLD=CPLDLibInst
	
	return (sysParams,sysStatus,afeInst)
(sysParams,sysStatus,AFE)=loadLibs()



try:
	import iGuiPage
	# try:
	import globalDefs as Globals
	imlFile=open(Globals.libFolderPath+r"\\resourceFiles\\afeiGui\\iGuiTree.iml",'r')
	imlFileLines= imlFile.readlines()
	imlFile.close()
	lineNo=0
	for line in imlFileLines:
		line=line.replace("path=","path =")
		line=line.replace(r"'",r'"')
		if "path =" in line:
			line=line[:line.find("path =")]+'path = "'+ Globals.libFolderPath+"\\"+line[line.find("resourceFiles"):]
	# 		line=line.replace(pathInLine.group(1)[:pathInLine.group(1).rfind('\\')],"path = '"+Globals.libFolderPath.replace(r'/',r'\\')+r"\\resourceFiles\\afeiGui\\")
		imlFileLines[lineNo]=line
		lineNo+=1
	imlFile=open(Globals.libFolderPath+r"\\resourceFiles\\afeiGui\\iGuiTree.iml",'w')
	imlFile.writelines(imlFileLines)
	imlFile.close()
	
	from iGui import iGui
	import afeiGui
	reload(afeiGui)
	import afeiGui.mAfe79xxJesdTxCode
	reload(afeiGui.mAfe79xxJesdTxCode)
	from afeiGui.mAfe79xxJesdTxCode import afe79xxJesdTxiGui
	
	import afeiGui.mAfe79xxJesdRxCode
	reload(afeiGui.mAfe79xxJesdRxCode)
	from afeiGui.mAfe79xxJesdRxCode import afe79xxJesdRxiGui
	import afeiGui.mAfe79xxSysParamCode
	reload(afeiGui.mAfe79xxSysParamCode)
	from afeiGui.mAfe79xxSysParamCode import afe79xxSystemParamsiGui
	
	import afeiGui.mAfe79xxGpioFinalMapGuiCode
	reload(afeiGui.mAfe79xxGpioFinalMapGuiCode)
	import afeiGui.mAfeGuiConstants
	reload(afeiGui.mAfeGuiConstants)
	from afeiGui.mAfeGuiConstants import afeGuiConstants
	import afeiGui.mAfeGuiController
	reload(afeiGui.mAfeGuiController)
	from afeiGui.mAfeGuiController import afeGuiControllerClass
	import afeiGui.mAfe79xxPllCode
	reload(afeiGui.mAfe79xxPllCode)
	from afeiGui.mAfe79xxPllCode import afe79xxPlliGui
	
	import afeiGui.mAfe79xxPowerCardiGui
	reload(afeiGui.mAfe79xxPowerCardiGui) 
	from afeiGui.mAfe79xxPowerCardiGui import afe79xxPowerCardiGui
		
	import afeiGui.mAfe79xxFpgaCpldiGui
	reload(afeiGui.mAfe79xxFpgaCpldiGui) 
	from afeiGui.mAfe79xxFpgaCpldiGui import afe79xxFpgaCpldiGui
	
	import afeiGui.mAfe79xxPapandAlarmiGui
	reload(afeiGui.mAfe79xxPapandAlarmiGui) 
	from afeiGui.mAfe79xxPapandAlarmiGui import afe79xxPapandAlarmiGui
	
	import afeiGui.mAfe79xxagciGui
	reload(afeiGui.mAfe79xxagciGui) 
	from afeiGui.mAfe79xxagciGui import afe79xxAgciGui
	
	import afeiGui.mAfe79xxncoiGui
	reload(afeiGui.mAfe79xxncoiGui) 
	from afeiGui.mAfe79xxncoiGui import afe79xxncoiGui
	
	from mAfeConstants import gpioConstants
	import afeiGui.mLmkGuiWrapper
	reload(afeiGui.mLmkGuiWrapper)
	
	import afeiGui.mAfe79xxTopSimplified
	reload(afeiGui.mAfe79xxTopSimplified) 
	from afeiGui.mAfe79xxTopSimplified import afe79xxtopSimplified
	
	import afeiGui.mAfeGuiConstants
	reload(afeiGui.mAfeGuiConstants) 
	from afeiGui.mAfeGuiConstants import afeGuiConstants
	
	import afeiGui.mAfe79xxConfig
	reload(afeiGui.mAfe79xxConfig) 
	from afeiGui.mAfe79xxConfig import afe79xxConfig	
	
	from afeiGui.mLmkGuiWrapper import lmkGuiWrapperClass
	lmkClassGui=lmkGuiWrapperClass()
	lmkClassGui.lmk=lmk
	afeGuiConstantsInst=afeGuiConstants()
	afeGuiConstantsInst.setupParams=setupParams
	afeGuiController=afeGuiControllerClass(AFE,gpioConstants,afeGuiConstantsInst)
	afeGuiConstantsInst.guiControllerInstance=afeGuiController
	
	configiGuiClass = afe79xxConfig(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.configiGuiInst = configiGuiClass	
	
	gpioStatusiGuiClass = afeiGui.mAfe79xxGpioFinalMapGuiCode.gpioMap(libInstance =AFE, afeGuiConstantsInst=afeGuiConstantsInst,cpld=cpld)
	afeGuiConstantsInst.gpioStatusiGuiClassInst  = gpioStatusiGuiClass
	
	topSimplifiediGuiClass = afe79xxtopSimplified(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.topSimplifiediGuiInst = topSimplifiediGuiClass
	
	sysParamsiGuiClass = afe79xxSystemParamsiGui( libInstance = AFE,afeGuiConstantsInst= afeGuiConstantsInst)
	afeGuiConstantsInst.sysParamInst = sysParamsiGuiClass
	
	jesdTxiGuiClass = afe79xxJesdTxiGui(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.jesdTxiGuiClassInst = jesdTxiGuiClass
	
	jesdRxiGuiClass = afe79xxJesdRxiGui(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.jesdRxiGuiClassInst = jesdRxiGuiClass
	
	plliGuiClass = afe79xxPlliGui(libInstance = AFE ,afeGuiConstantsInst= afeGuiConstantsInst)
	afeGuiConstantsInst.plliGuiClassInst=plliGuiClass
	
	papandAlarmiGuiClass=afe79xxPapandAlarmiGui(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.papandAlarmiGuiClassInst=papandAlarmiGuiClass
	
	ncoControliGuiClass=afe79xxncoiGui(libInstance = AFE, afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.ncoControliGuiClassInst=ncoControliGuiClass
	
	agcAndAlciGuiClass=afe79xxAgciGui(libInstance = AFE, afeGuiConstantsInst=afeGuiConstantsInst)
	afeGuiConstantsInst.agcAndAlciGuiClassInst=agcAndAlciGuiClass
	
	fpgaCpldiGuiClass = afe79xxFpgaCpldiGui(libInstance = AFE, afeGuiConstantsInst=afeGuiConstantsInst, fpga=myfpga)
	afeGuiConstantsInst.fpgaCpldiGuiClass=fpgaCpldiGuiClass
	afeGuiConstantsInst.powerCardInst = pc
	
	powerCardiGuiClass = afe79xxPowerCardiGui(libInstance = AFE,afeGuiConstantsInst=afeGuiConstantsInst,pc = pc)
	
	afe79xxiGui= iGui(fileName = Globals.libFolderPath+"//resourceFiles//"+r"\\afeiGui\iGuiTree.iml")
	afeGuiController.updateObjectsFunc()
	afe79xxiGui.show()
	
	configiGuiClass._partnumber.setValue(1)
	configiGuiClass._partnumber.gui.widgets[1].combo.setDisabled(1)
	topSimplifiediGuiClass._partnumber.setValue(1)
	topSimplifiediGuiClass._partnumber.gui.widgets[1].combo.setDisabled(1)
	sysParamsiGuiClass._partnumber.setValue(1)
	sysParamsiGuiClass._partnumber.gui.widgets[1].combo.setDisabled(1)	
	
	configiGuiClass.loadExcelData()
	afeGuiConstantsInst.guiInstance = afe79xxiGui
	setupParams.afe79xxiGui=afe79xxiGui
	setupParams.afeGuiConstants=afeGuiConstants
	Globals.iGuiInstance=[afe79xxiGui.mainWindow]
	
	for indexOfSvg in range(len(afe79xxiGui.mainWindow.stackWidget.children())):
		if type(afe79xxiGui.mainWindow.stackWidget.widget(indexOfSvg)) != iGuiPage.iGuiPage:
			continue
		afe79xxiGui.mainWindow.stackWidget.widget(indexOfSvg).svgWidget.setMinimumSize(1600, 900)  # sets minimum size for the svg
		
	from PySide.QtCore import *
	
	configiGuiClass._comments0.setValue("   1. In HSDC Pro DAC tab, Select AFE79xx_2x2TX_44210, Data Rate = 491.52M.\n   2. In HSDC Pro ADC tab, Select AFE79xx_2x2RX_24410, Data Rate = 245.76M ---> To capture 4 RX channels.\n   3. In HSDC Pro ADC tab, Select AFE79xx_1x2FB_44210, Data Rate = 491.52M ---> To capture 2 FB channels.")
	
	configiGuiClass._comments0.gui.widgets[1].valueLabel.setAlignment(Qt.AlignLeft)
	configiGuiClass._comments0.gui.widgets[1].valueLabel.setAlignment(Qt.AlignVCenter)
	# configiGuiClass._comments0.gui.widgets[1].valueLabel.setAlignment(Qt.WA_Resized)	
	

except:
	error("Error Loading iGui")

mainWindow.restoreSession(PROJECTS_DIR+r"\AFE79xx\bringup\customGui.astx")
Connect(process.fftImdParams._fin1,sigSource._frequency,1,1)
Connect(process.fftImdParams._fin2,imdSource._frequency,1,1)
engine.sampleNo=32768

process.complexfftParam.ignoreBinsAroundFin1AndFin2ForSnr=1
process.complexfftParam.ignoreImdBinsForSnr=1
process.complexfftParam.finSkipBins=200
gc.collect()

process.fftParam.snrFreqBandLower=100e6
process.fftParam.finSkipBins=200

lmk.logEn=0
if simulationMode==True or boardType in ['AFE79FMC']:
	device.delay_time=0
elif useMpsse:
	device.delay_time=0.005
else:
	device.delay_time=0.02