<?xml version="1.0" encoding="utf-8"?>
<ProjectData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <Version>1</Version>
  <Timestamp>2020-06-11T14:02:04.8703566+08:00</Timestamp>
  <Creator>Texas Instruments Fusion Digital Power Designer v7.3.1.0 [2020-05-06]</Creator>
  <Devices>
    <Device>
      <PartID>UCD90160A</PartID>
      <Address>52</Address>
      <Is_Offline>false</Is_Offline>
      <SAA_Number>1</SAA_Number>
      <Saved_In_Offline_Mode xsi:nil="true" />
      <Saved_While_NVM_Write_Pending xsi:nil="true" />
      <Device_ID>UCD90160A|2.4.3.0809|160916</Device_ID>
      <Write_Protected>false</Write_Protected>
      <Package>64</Package>
      <Command_Device_Configs>
        <item>
          <key>
            <unsignedByte>0</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>1</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>2</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>3</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>17</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>25</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>32</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>33</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>37</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>38</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>42</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>64</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>66</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>67</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>68</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>94</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>95</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>96</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>98</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>100</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>102</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>120</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>121</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>122</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>126</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>139</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>152</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>153</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>154</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>155</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>156</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>157</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>158</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>185</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>209</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>210</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>211</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>212</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>213</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>214</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>215</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>216</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>217</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>218</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>219</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>220</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>221</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>222</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>223</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>224</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>225</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>226</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>227</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>233</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>234</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>235</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>236</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>237</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>239</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>240</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>241</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>243</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>245</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>246</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>true</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>247</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>248</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>249</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>250</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>251</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>252</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
        <item>
          <key>
            <unsignedByte>253</unsignedByte>
          </key>
          <value>
            <CommandDeviceConfiguration>
              <Is_Paged>false</Is_Paged>
            </CommandDeviceConfiguration>
          </value>
        </item>
      </Command_Device_Configs>
      <Num_Outputs>16</Num_Outputs>
      <Parameters>
        <Parameter>
          <ID>PWM_CONFIG_0</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_0 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 0; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_1</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_1 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 1; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_2</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_2 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 2; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_3</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_3 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 3; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_4</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_4 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 4; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_5</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_5 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 5; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_6</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_6 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 6; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_7</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_7 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 7; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000008000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_8</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_8 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 8; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_9</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_9 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 9; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_10</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_10 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 10; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PWM_CONFIG_11</ID>
          <Code>225</Code>
          <IDAndCode>PWM_CONFIG_11 [MFR 17,0xE1]</IDAndCode>
          <ValueText>Pin_ID = 11; Duty Cycle: 0.0 %; Frequency: 0 Hz; Phase: 0.0 deg</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8800000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_0</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_0 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_1</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_1 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_2</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_2 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_3</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_3 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_4</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_4 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_5</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_5 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_6</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_6 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_7</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_7 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_8</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_8 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_9</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_9 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_10</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_10 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_11</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_11 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_12</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_12 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_13</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_13 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_14</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_14 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_15</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_15 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_16</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_16 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_17</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_17 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_18</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_18 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_19</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_19 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_20</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_20 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_21</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_21 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_22</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_22 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_23</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_23 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: True</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x08" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_24</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_24 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPIO_CONFIG_25</ID>
          <Code>251</Code>
          <IDAndCode>GPIO_CONFIG_25 [MFR 43,0xFB]</IDAndCode>
          <ValueText>Enable: False; Out_Enable: False; Out_Value: False; Status: False</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>CAPABILITY</ID>
          <Code>25</Code>
          <IDAndCode>CAPABILITY [0x19]</IDAndCode>
          <ValueText>Max Bus: 400 Khz; PEC: Yes; SMBALERT#: Yes</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0xB0" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>CONSTANTS</ID>
          <Code>223</Code>
          <IDAndCode>CONSTANTS [MFR 15,0xDF]</IDAndCode>
          <ValueText>Max # Digital Comparators: 6; Max # GPOs: 16; Max # GPIs: 8; Max # Pages: 16; Max # Fans: 0; Max # Monitors: 16; Max # Fault Detail Items: 18; Max # PWMs: 12</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x061008100010120C" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>DEVICE_ID</ID>
          <Code>253</Code>
          <IDAndCode>DEVICE_ID [MFR 45,0xFD]</IDAndCode>
          <ValueText>UCD90160A|2.4.3.0809|160916</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x5543443930313630417C322E342E332E303830397C31363039313600" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPI_CONFIG</ID>
          <Code>249</Code>
          <IDAndCode>GPI_CONFIG [MFR 41,0xF9]</IDAndCode>
          <ValueText>Inputs: Pin 31 GPI1_PWM1 ActiveHigh;Pin 32 GPI2_PWM2 ActiveHigh;Pin 42 GPI3_PWM3 ActiveHigh;Pin 41 GPI4_PWM4 ActiveHigh;Unassigned;Unassigned;Unassigned;Unassigned;; Fault Responses: Max Glitch Time: 0.0 ms| Fault Response: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| Page Mask: ; Fault Pin Config: Max Glitch Time: 0.0 ms| Fault Response: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| Page Mask for Output: | Page Mask for Responses: </ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x454D555D000000000000000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_1</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_1 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 38 TDI_GPIO21 ActiveHigh ActivelyDrivenOutput; RAIL9 [POWER_GOOD]; Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x8E0001000001000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_2</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_2 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 37 TDO_GPIO20 ActiveHigh ActivelyDrivenOutput; RAIL10 [POWER_GOOD]; Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x760001000002000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_3</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_3 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 11 GPIO1 ActiveHigh ActivelyDrivenOutput; (RAIL13 [POWER_GOOD]) + (GPI3); Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x960000000010000000000000000000040000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_4</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_4 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 14 GPIO4 ActiveHigh ActivelyDrivenOutput; (RAIL14 [POWER_GOOD]) + (GPI2); Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xAE0001000120000000000000000000020000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_5</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_5 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 22 FPWM6_GPIO10 ActiveHigh ActivelyDrivenOutput; (RAIL6 [POWER_GOOD]) + (GPI1); Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x2E0000000000200000000000000000010000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_6</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_6 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 39 TMS_GPIO22 ActiveLow ActivelyDrivenOutput; RAIL5' • RAIL6' • RAIL7' • RAIL8' • RAIL9' • RAIL10' • RAIL11' • RAIL12' • RAIL16' [POWER_GOOD]; Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x82000100008FF000008FF000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_7</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_7 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 36 TCK_GPIO19 ActiveLow ActivelyDrivenOutput; RAIL4' • RAIL13' • RAIL14' • RAIL15' [POWER_GOOD]; Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x7A0001000070080000700800000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_8</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_8 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 21 FPWM5_GPIO9 ActiveHigh ActivelyDrivenOutput; RAIL1 • RAIL2 • RAIL3 • RAIL4 • RAIL5 • RAIL6 • RAIL7 • RAIL8 • RAIL9 • RAIL10 • RAIL11 • RAIL12 • RAIL13 • RAIL14 • RAIL15 • RAIL16 [POWER_GOOD]; Delay Time: 2 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x2600020000FFFF0000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_9</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_9 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Pin 23 FPWM7_GPIO11 ActiveHigh ActivelyDrivenOutput; RAIL2 [POWER_GOOD]; Delay Time: 1 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x360001000000020000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_10</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_10 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_11</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_11 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_12</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_12 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_13</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_13 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_14</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_14 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_15</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_15 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>GPO_CONFIG_16</ID>
          <Code>248</Code>
          <IDAndCode>GPO_CONFIG_16 [MFR 40,0xF8]</IDAndCode>
          <ValueText>Unassigned; No Mask; Delay Time: 0 ms; Assert Delay disabled; Assert Delay disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_FAULT_DETAIL_ENABLES</ID>
          <Code>239</Code>
          <IDAndCode>LOGGED_FAULT_DETAIL_ENABLES [MFR 31,0xEF]</IDAndCode>
          <ValueText>Common: LOG_NOT_EMPTY,SYSTEM_WATCHDOG_TIMEOUT,RESEQUENCE_ERROR,WATCHDOG_TIMEOUT,RESERVED4_OR_SINGLEEVTUPSET,RESERVED5,RESERVED6,RESERVED7; GPI: #1,2,3,4,5,6,7,8; Rail #1: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #2: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #3: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #4: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #5: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #6: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #7: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #8: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #9: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #10: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #11: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #12: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #13: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #14: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #15: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT; Rail #16: VOUT_OV,VOUT_UV,TON_MAX,RESERVED3,RESERVED4,RESERVED5,SEQ_ON_TIMEOUT,SEQ_OFF_TIMEOUT</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_FAULTS2</ID>
          <Code>234</Code>
          <IDAndCode>LOGGED_FAULTS [MFR 26,0xEA]</IDAndCode>
          <ValueText>Common: LOG_NOT_EMPTY; GPI: &lt;empty&gt;; Rail #1: VOUT_UV; Rail #2: &lt;EMPTY&gt;; Rail #3: &lt;EMPTY&gt;; Rail #4: VOUT_UV; Rail #5: &lt;EMPTY&gt;; Rail #6: &lt;EMPTY&gt;; Rail #7: &lt;EMPTY&gt;; Rail #8: &lt;EMPTY&gt;; Rail #9: &lt;EMPTY&gt;; Rail #10: &lt;EMPTY&gt;; Rail #11: &lt;EMPTY&gt;; Rail #12: &lt;EMPTY&gt;; Rail #13: &lt;EMPTY&gt;; Rail #14: &lt;EMPTY&gt;; Rail #15: &lt;EMPTY&gt;; Rail #16: &lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x010002000002000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_DATE</ID>
          <Code>157</Code>
          <IDAndCode>MFR_DATE [0x9D]</IDAndCode>
          <ValueText>YYMMDD</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x59594D4D4444" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_ID</ID>
          <Code>153</Code>
          <IDAndCode>MFR_ID [0x99]</IDAndCode>
          <ValueText>MFR_ID</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x4D46525F4944" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_LOCATION</ID>
          <Code>156</Code>
          <IDAndCode>MFR_LOCATION [0x9C]</IDAndCode>
          <ValueText>MFR_LOCATION</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x4D46525F4C4F434154494F4E" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_MODEL</ID>
          <Code>154</Code>
          <IDAndCode>MFR_MODEL [0x9A]</IDAndCode>
          <ValueText>MFR_MODEL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x4D46525F4D4F44454C" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_REVISION</ID>
          <Code>155</Code>
          <IDAndCode>MFR_REVISION [0x9B]</IDAndCode>
          <ValueText>MFR_REVISION</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x4D46525F5245564953494F4E" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_SERIAL</ID>
          <Code>158</Code>
          <IDAndCode>MFR_SERIAL [0x9E]</IDAndCode>
          <ValueText>000000</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x303030303030" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MISC_CONFIG</ID>
          <Code>252</Code>
          <IDAndCode>MISC_CONFIG [MFR 44,0xFC]</IDAndCode>
          <ValueText>Time Between Resequences: 0 msec; Resequence Abort: no; Max Resequences: 1; FIFO Mode: Disabled; Brownout Enable: no; Disable all logging: no; Resequence Rails Mask: 0x00 [0000000000000000b]</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MONITOR_CONFIG</ID>
          <Code>213</Code>
          <IDAndCode>MONITOR_CONFIG [MFR 05,0xD5]</IDAndCode>
          <ValueText>Pin 1 MON1: Rail #1, Type Voltage; Pin 2 MON2: Rail #2, Type Voltage; Pin 3 MON3: Rail #3, Type Voltage; Pin 4 MON4: Rail #4, Type Voltage; Pin 5 MON5: Rail #5, Type Voltage; Pin 6 MON6: Rail #6, Type Voltage; Pin 55 MON7: Rail #7, Type Voltage; Pin 56 MON8: Rail #8, Type Voltage; Pin 57 MON9: Rail #9, Type Voltage; Pin 58 MON10: Rail #10, Type Voltage; Pin 59 MON11: Rail #11, Type Voltage; Pin 62 MON12: Rail #12, Type Voltage; Pin 63 MON13: Rail #13, Type Voltage; Pin 50 MON14: Rail #14, Type Voltage; Pin 52 MON15: Rail #15, Type Voltage; Pin 54 MON16: Rail #16, Type Voltage</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x202122232425262728292A2B2C2D2E2F" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>NUM_PAGES</ID>
          <Code>214</Code>
          <IDAndCode>NUM_PAGES [MFR 06,0xD6]</IDAndCode>
          <ValueText>16</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x10" />
          <ParameterType>UnitlessZeroDigit</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PIN_SELECTED_RAIL_STATES</ID>
          <Code>221</Code>
          <IDAndCode>PIN_SELECTED_RAIL_STATES [MFR 13,0xDD]</IDAndCode>
          <ValueText>State 0: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 1: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 2: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 3: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 4: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 5: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 6: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off; State 7: Enabled=No, Turn Off Mode=ImmediateOff, Rails States= Rail #1 Off, Rail #2 Off, Rail #3 Off, Rail #4 Off, Rail #5 Off, Rail #6 Off, Rail #7 Off, Rail #8 Off, Rail #9 Off, Rail #10 Off, Rail #11 Off, Rail #12 Off, Rail #13 Off, Rail #14 Off, Rail #15 Off, Rail #16 Off</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>PMBUS_REVISION</ID>
          <Code>152</Code>
          <IDAndCode>PMBUS_REVISION [0x98]</IDAndCode>
          <ValueText>1.1,1.1 - Part I: 1.1, Part II: 1.1</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x21" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Manufacturer</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>RESET_COUNT2</ID>
          <Code>220</Code>
          <IDAndCode>RESET_COUNT [MFR 12,0xDC]</IDAndCode>
          <ValueText>0 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>UnitlessZeroDigit</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>REAL_TIME_CLOCK</ID>
          <Code>215</Code>
          <IDAndCode>RUN_TIME_CLOCK [MFR 07,0xD7]</IDAndCode>
          <ValueText>0 Days, 00:00:27.110</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000069E600000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>REAL_TIME_CLOCK_TRIM</ID>
          <Code>216</Code>
          <IDAndCode>RUN_TIME_CLOCK_TRIM [MFR 08,0xD8]</IDAndCode>
          <ValueText>0.00 %</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8800" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Percent</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_BYTE</ID>
          <Code>120</Code>
          <IDAndCode>STATUS_BYTE [0x78]</IDAndCode>
          <ValueText>NONE_OF_ABOVE,OFF</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x41" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_CML</ID>
          <Code>126</Code>
          <IDAndCode>STATUS_CML [0x7E]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_WORD</ID>
          <Code>121</Code>
          <IDAndCode>STATUS_WORD [0x79]</IDAndCode>
          <ValueText>NONE_OF_ABOVE,OFF,POWER_GOOD,MFR</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x1841" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SYSTEM_RESET_CONFIG</ID>
          <Code>210</Code>
          <IDAndCode>SYSTEM_RESET_CONFIG [MFR 02,0xD2]</IDAndCode>
          <ValueText>Disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SYSTEM_WATCHDOG_CONFIG</ID>
          <Code>211</Code>
          <IDAndCode>SYSTEM_WATCHDOG_CONFIG [MFR 03,0xD3]</IDAndCode>
          <ValueText>Disabled</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>255</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #1]</IDAndCode>
          <ValueText>EXP =-10</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #1]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #1]</IDAndCode>
          <ValueText>Voltage: 12.034 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x2330" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #1]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #1]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #1]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #1]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #1]</IDAndCode>
          <ValueText>10.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x28CD" />
          <ValueNumeric>10.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #1]</IDAndCode>
          <ValueText>10.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B33" />
          <ValueNumeric>10.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #1]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #1]</IDAndCode>
          <ValueText>2.639 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0A8E" />
          <ValueNumeric>2.639</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #1]</IDAndCode>
          <ValueText>Rail On Dep: &lt;None&gt; | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: Rail #8 | Enable: Unassigned; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x94000000000000000000000000800000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #1]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #1]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #1]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #1]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #1]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #1]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #1]</IDAndCode>
          <ValueText>12.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3000" />
          <ValueNumeric>12</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #1]</IDAndCode>
          <ValueText>12.600 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3266" />
          <ValueNumeric>12.6</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #1]</IDAndCode>
          <ValueText>11.400 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2D9A" />
          <ValueNumeric>11.4</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #1]</IDAndCode>
          <ValueText>13.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3733" />
          <ValueNumeric>13.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #1]</IDAndCode>
          <ValueText>13.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x34CD" />
          <ValueNumeric>13.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #1]</IDAndCode>
          <ValueText>0.175 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xA2CD" />
          <ValueNumeric>0.175</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #1]</IDAndCode>
          <ValueText>10.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x28CD" />
          <ValueNumeric>10.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #1]</IDAndCode>
          <ValueText>10.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B33" />
          <ValueNumeric>10.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>0</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #2]</IDAndCode>
          <ValueText>EXP =-10</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #2]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #2]</IDAndCode>
          <ValueText>Voltage: 12.926 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xB433" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #2]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #2]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #2]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #2]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #2]</IDAndCode>
          <ValueText>10.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x28CD" />
          <ValueNumeric>10.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #2]</IDAndCode>
          <ValueText>10.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B33" />
          <ValueNumeric>10.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #2]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #2]</IDAndCode>
          <ValueText>0.335 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0157" />
          <ValueNumeric>0.335</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #2]</IDAndCode>
          <ValueText>Rail On Dep: Rail #4 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 24 FPWM8_GPIO12 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x3E000000000000000008000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #2]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #2]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #2]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #2]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #2]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #2]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #2]</IDAndCode>
          <ValueText>12.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3000" />
          <ValueNumeric>12</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #2]</IDAndCode>
          <ValueText>12.600 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3266" />
          <ValueNumeric>12.6</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #2]</IDAndCode>
          <ValueText>11.400 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2D9A" />
          <ValueNumeric>11.4</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #2]</IDAndCode>
          <ValueText>13.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3733" />
          <ValueNumeric>13.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #2]</IDAndCode>
          <ValueText>13.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x34CD" />
          <ValueNumeric>13.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #2]</IDAndCode>
          <ValueText>0.175 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xA2CD" />
          <ValueNumeric>0.175</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #2]</IDAndCode>
          <ValueText>10.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x28CD" />
          <ValueNumeric>10.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #2]</IDAndCode>
          <ValueText>10.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B33" />
          <ValueNumeric>10.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>1</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #3]</IDAndCode>
          <ValueText>EXP =-13</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x13" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #3]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #3]</IDAndCode>
          <ValueText>Voltage: 1.940 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x183E" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #3]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #3]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #3]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #3]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #3]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #3]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #3]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #3]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0006" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #3]</IDAndCode>
          <ValueText>Rail On Dep: Rail #9 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Unassigned; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000000000000000100000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #3]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #3]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #3]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #3]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #3]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #3]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #3]</IDAndCode>
          <ValueText>1.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x399A" />
          <ValueNumeric>1.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #3]</IDAndCode>
          <ValueText>1.890 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3C7B" />
          <ValueNumeric>1.89</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #3]</IDAndCode>
          <ValueText>1.710 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x36B8" />
          <ValueNumeric>1.71</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #3]</IDAndCode>
          <ValueText>2.070 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x423D" />
          <ValueNumeric>2.07</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #3]</IDAndCode>
          <ValueText>1.980 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3F5C" />
          <ValueNumeric>1.98</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #3]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #3]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #3]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>2</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #4]</IDAndCode>
          <ValueText>EXP =-12</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x14" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #4]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #4]</IDAndCode>
          <ValueText>Voltage: 4.969 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x824F" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #4]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #4]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL,STORE_DEFAULT_ALL_DONE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000240" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #4]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #4]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #4]</IDAndCode>
          <ValueText>4.250 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4400" />
          <ValueNumeric>4.25</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #4]</IDAndCode>
          <ValueText>4.500 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4800" />
          <ValueNumeric>4.5</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #4]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #4]</IDAndCode>
          <ValueText>0.308 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x04ED" />
          <ValueNumeric>0.308</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #4]</IDAndCode>
          <ValueText>Rail On Dep: Rail #15 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 20 FPWM4_GPIO8 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x1E000000000000004000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #4]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #4]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #4]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #4]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #4]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #4]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #4]</IDAndCode>
          <ValueText>5.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5000" />
          <ValueNumeric>5</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #4]</IDAndCode>
          <ValueText>5.250 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5400" />
          <ValueNumeric>5.25</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #4]</IDAndCode>
          <ValueText>4.750 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4C00" />
          <ValueNumeric>4.75</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #4]</IDAndCode>
          <ValueText>5.750 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5C00" />
          <ValueNumeric>5.75</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #4]</IDAndCode>
          <ValueText>5.500 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5800" />
          <ValueNumeric>5.5</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #4]</IDAndCode>
          <ValueText>0.333 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xAAAA" />
          <ValueNumeric>0.333</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #4]</IDAndCode>
          <ValueText>4.250 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4400" />
          <ValueNumeric>4.25</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #4]</IDAndCode>
          <ValueText>4.500 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4800" />
          <ValueNumeric>4.5</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>3</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #5]</IDAndCode>
          <ValueText>EXP =-12</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x14" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #5]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #5]</IDAndCode>
          <ValueText>Voltage: 3.229 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xAA33" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #5]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #5]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL,STORE_DEFAULT_ALL_DONE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000240" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #5]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #5]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #5]</IDAndCode>
          <ValueText>2.805 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2CE1" />
          <ValueNumeric>2.805</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #5]</IDAndCode>
          <ValueText>2.970 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2F85" />
          <ValueNumeric>2.97</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #5]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #5]</IDAndCode>
          <ValueText>0.703 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0B40" />
          <ValueNumeric>0.703</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #5]</IDAndCode>
          <ValueText>Rail On Dep: Rail #2 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #6 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 25 GPIO13 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xB6000000000000000002002000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #5]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #5]</IDAndCode>
          <ValueText>0.5 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xABFF" />
          <ValueNumeric>0.5</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #5]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #5]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #5]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #5]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #5]</IDAndCode>
          <ValueText>3.300 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x34CD" />
          <ValueNumeric>3.3</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #5]</IDAndCode>
          <ValueText>3.465 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3771" />
          <ValueNumeric>3.465</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #5]</IDAndCode>
          <ValueText>3.135 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3229" />
          <ValueNumeric>3.135</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #5]</IDAndCode>
          <ValueText>3.795 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3CB8" />
          <ValueNumeric>3.795</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #5]</IDAndCode>
          <ValueText>3.630 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3A14" />
          <ValueNumeric>3.63</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #5]</IDAndCode>
          <ValueText>0.500 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB200" />
          <ValueNumeric>0.5</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #5]</IDAndCode>
          <ValueText>2.805 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2CE1" />
          <ValueNumeric>2.805</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #5]</IDAndCode>
          <ValueText>2.970 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2F85" />
          <ValueNumeric>2.97</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>4</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #6]</IDAndCode>
          <ValueText>EXP =-13</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x13" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #6]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #6]</IDAndCode>
          <ValueText>Voltage: 1.938 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x043E" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #6]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #6]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #6]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #6]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #6]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #6]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #6]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #6]</IDAndCode>
          <ValueText>0.021 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x00AA" />
          <ValueNumeric>0.021</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #6]</IDAndCode>
          <ValueText>Rail On Dep: Rail #5 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #10 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 29 DBG_GPIO14 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x66000000000000000010020000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #6]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #6]</IDAndCode>
          <ValueText>0.5 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xABFF" />
          <ValueNumeric>0.5</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #6]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #6]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #6]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #6]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #6]</IDAndCode>
          <ValueText>1.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x399A" />
          <ValueNumeric>1.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #6]</IDAndCode>
          <ValueText>1.890 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3C7B" />
          <ValueNumeric>1.89</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #6]</IDAndCode>
          <ValueText>1.710 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x36B8" />
          <ValueNumeric>1.71</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #6]</IDAndCode>
          <ValueText>2.070 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x423D" />
          <ValueNumeric>2.07</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #6]</IDAndCode>
          <ValueText>1.980 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3F5C" />
          <ValueNumeric>1.98</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #6]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #6]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #6]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>5</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #7]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #7]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #7]</IDAndCode>
          <ValueText>Voltage: 1.252 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x2850" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #7]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #7]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #7]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #7]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #7]</IDAndCode>
          <ValueText>1.020 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4148" />
          <ValueNumeric>1.02</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #7]</IDAndCode>
          <ValueText>1.080 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x451F" />
          <ValueNumeric>1.08</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #7]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #7]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0014" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #7]</IDAndCode>
          <ValueText>Rail On Dep: Rail #9 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #11 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 30 GPIO15 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x6E000000000000000100040000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #7]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #7]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #7]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #7]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #7]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #7]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #7]</IDAndCode>
          <ValueText>1.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4CCD" />
          <ValueNumeric>1.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #7]</IDAndCode>
          <ValueText>1.260 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x50A4" />
          <ValueNumeric>1.26</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #7]</IDAndCode>
          <ValueText>1.140 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x48F6" />
          <ValueNumeric>1.14</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #7]</IDAndCode>
          <ValueText>1.380 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5852" />
          <ValueNumeric>1.38</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #7]</IDAndCode>
          <ValueText>1.320 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x547B" />
          <ValueNumeric>1.32</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #7]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #7]</IDAndCode>
          <ValueText>1.020 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4148" />
          <ValueNumeric>1.02</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #7]</IDAndCode>
          <ValueText>1.080 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x451F" />
          <ValueNumeric>1.08</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>6</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #8]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #8]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #8]</IDAndCode>
          <ValueText>Voltage: 1.442 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x505C" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #8]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #8]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #8]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #8]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #8]</IDAndCode>
          <ValueText>1.148 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4979" />
          <ValueNumeric>1.148</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #8]</IDAndCode>
          <ValueText>1.215 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4DC3" />
          <ValueNumeric>1.215</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #8]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #8]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x000C" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #8]</IDAndCode>
          <ValueText>Rail On Dep: Rail #16 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 33 GPIO16 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xBE000000000000008000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #8]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #8]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #8]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #8]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #8]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #8]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #8]</IDAndCode>
          <ValueText>1.350 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5666" />
          <ValueNumeric>1.35</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #8]</IDAndCode>
          <ValueText>1.418 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5AC1" />
          <ValueNumeric>1.418</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #8]</IDAndCode>
          <ValueText>1.281 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x51FC" />
          <ValueNumeric>1.281</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #8]</IDAndCode>
          <ValueText>1.553 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x6364" />
          <ValueNumeric>1.553</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #8]</IDAndCode>
          <ValueText>1.485 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5F0A" />
          <ValueNumeric>1.485</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #8]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #8]</IDAndCode>
          <ValueText>1.148 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4979" />
          <ValueNumeric>1.148</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #8]</IDAndCode>
          <ValueText>1.215 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4DC3" />
          <ValueNumeric>1.215</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>7</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #9]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #9]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #9]</IDAndCode>
          <ValueText>Voltage: 0.798 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x1033" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #9]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #9]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #9]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #9]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #9]</IDAndCode>
          <ValueText>0.680 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B85" />
          <ValueNumeric>0.68</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #9]</IDAndCode>
          <ValueText>0.720 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2E14" />
          <ValueNumeric>0.72</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #9]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #9]</IDAndCode>
          <ValueText>0.002 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0020" />
          <ValueNumeric>0.002</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #9]</IDAndCode>
          <ValueText>Rail On Dep: Rail #10 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #7 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 34 GPIO17 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xC6000000000000000200004000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #9]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #9]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #9]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #9]</IDAndCode>
          <ValueText>1.6 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBB33" />
          <ValueNumeric>1.6</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #9]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #9]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #9]</IDAndCode>
          <ValueText>0.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3333" />
          <ValueNumeric>0.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #9]</IDAndCode>
          <ValueText>0.840 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x35C3" />
          <ValueNumeric>0.84</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #9]</IDAndCode>
          <ValueText>0.760 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30A4" />
          <ValueNumeric>0.76</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #9]</IDAndCode>
          <ValueText>0.920 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3AE1" />
          <ValueNumeric>0.92</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #9]</IDAndCode>
          <ValueText>0.880 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3852" />
          <ValueNumeric>0.88</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #9]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #9]</IDAndCode>
          <ValueText>0.680 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2B85" />
          <ValueNumeric>0.68</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #9]</IDAndCode>
          <ValueText>0.720 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2E14" />
          <ValueNumeric>0.72</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>8</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #10]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #10]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #10]</IDAndCode>
          <ValueText>Voltage: 0.843 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xF435" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #10]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #10]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #10]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #10]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #10]</IDAndCode>
          <ValueText>0.714 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2DB2" />
          <ValueNumeric>0.714</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #10]</IDAndCode>
          <ValueText>0.756 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3062" />
          <ValueNumeric>0.756</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #10]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #10]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0014" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #10]</IDAndCode>
          <ValueText>Rail On Dep: Rail #6 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #9 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 35 GPIO18 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xCE000000000000000020010000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #10]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #10]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #10]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #10]</IDAndCode>
          <ValueText>2.7 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xC2B3" />
          <ValueNumeric>2.7</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #10]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #10]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #10]</IDAndCode>
          <ValueText>0.840 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x35C3" />
          <ValueNumeric>0.84</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #10]</IDAndCode>
          <ValueText>0.882 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3873" />
          <ValueNumeric>0.882</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #10]</IDAndCode>
          <ValueText>0.798 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3312" />
          <ValueNumeric>0.798</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #10]</IDAndCode>
          <ValueText>0.966 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3DD3" />
          <ValueNumeric>0.966</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #10]</IDAndCode>
          <ValueText>0.924 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3B23" />
          <ValueNumeric>0.924</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #10]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #10]</IDAndCode>
          <ValueText>0.714 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2DB2" />
          <ValueNumeric>0.714</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #10]</IDAndCode>
          <ValueText>0.756 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3062" />
          <ValueNumeric>0.756</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>9</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #11]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #11]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #11]</IDAndCode>
          <ValueText>Voltage: 0.874 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xF037" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #11]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #11]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #11]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #11]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #11]</IDAndCode>
          <ValueText>0.748 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2FDF" />
          <ValueNumeric>0.748</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #11]</IDAndCode>
          <ValueText>0.792 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x32B0" />
          <ValueNumeric>0.792</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #11]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #11]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x000C" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #11]</IDAndCode>
          <ValueText>Rail On Dep: Rail #7 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #12 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 17 FPWM1_GPIO5 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x06000000000000000040080000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #11]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #11]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #11]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #11]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #11]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #11]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #11]</IDAndCode>
          <ValueText>0.880 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3852" />
          <ValueNumeric>0.88</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #11]</IDAndCode>
          <ValueText>0.924 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3B23" />
          <ValueNumeric>0.924</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #11]</IDAndCode>
          <ValueText>0.836 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3581" />
          <ValueNumeric>0.836</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #11]</IDAndCode>
          <ValueText>1.012 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x40C5" />
          <ValueNumeric>1.012</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #11]</IDAndCode>
          <ValueText>0.968 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3DF4" />
          <ValueNumeric>0.968</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #11]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #11]</IDAndCode>
          <ValueText>0.748 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2FDF" />
          <ValueNumeric>0.748</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #11]</IDAndCode>
          <ValueText>0.792 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x32B0" />
          <ValueNumeric>0.792</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>10</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #12]</IDAndCode>
          <ValueText>EXP =-13</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x13" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #12]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #12]</IDAndCode>
          <ValueText>Voltage: 1.949 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x623E" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #12]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #12]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #12]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #12]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #12]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #12]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #12]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #12]</IDAndCode>
          <ValueText>0.001 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x000A" />
          <ValueNumeric>0.001</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #12]</IDAndCode>
          <ValueText>Rail On Dep: Rail #11 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #16 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 18 FPWM2_GPIO6 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x0E000000000000000400800000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #12]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #12]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #12]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #12]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #12]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #12]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #12]</IDAndCode>
          <ValueText>1.800 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x399A" />
          <ValueNumeric>1.8</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #12]</IDAndCode>
          <ValueText>1.890 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3C7B" />
          <ValueNumeric>1.89</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #12]</IDAndCode>
          <ValueText>1.710 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x36B8" />
          <ValueNumeric>1.71</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #12]</IDAndCode>
          <ValueText>2.070 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x423D" />
          <ValueNumeric>2.07</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #12]</IDAndCode>
          <ValueText>1.980 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3F5C" />
          <ValueNumeric>1.98</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #12]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #12]</IDAndCode>
          <ValueText>1.530 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x30F6" />
          <ValueNumeric>1.53</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #12]</IDAndCode>
          <ValueText>1.620 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x33D7" />
          <ValueNumeric>1.62</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>11</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #13]</IDAndCode>
          <ValueText>EXP =-12</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x14" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #13]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #13]</IDAndCode>
          <ValueText>Voltage: 3.268 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x4A34" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #13]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 5, # 22 FPWM6_GPIO10</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x05" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #13]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #13]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #13]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #13]</IDAndCode>
          <ValueText>2.805 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2CE1" />
          <ValueNumeric>2.805</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #13]</IDAndCode>
          <ValueText>2.970 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2F85" />
          <ValueNumeric>2.97</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #13]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #13]</IDAndCode>
          <ValueText>3.093 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x317E" />
          <ValueNumeric>3.093</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #13]</IDAndCode>
          <ValueText>Rail On Dep: &lt;None&gt; | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Unassigned; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000000000000000000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #13]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #13]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #13]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #13]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #13]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #13]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #13]</IDAndCode>
          <ValueText>3.300 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x34CD" />
          <ValueNumeric>3.3</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #13]</IDAndCode>
          <ValueText>3.465 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3771" />
          <ValueNumeric>3.465</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #13]</IDAndCode>
          <ValueText>3.135 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3229" />
          <ValueNumeric>3.135</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #13]</IDAndCode>
          <ValueText>3.795 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3CB8" />
          <ValueNumeric>3.795</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #13]</IDAndCode>
          <ValueText>3.630 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x3A14" />
          <ValueNumeric>3.63</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #13]</IDAndCode>
          <ValueText>0.500 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB200" />
          <ValueNumeric>0.5</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #13]</IDAndCode>
          <ValueText>2.805 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2CE1" />
          <ValueNumeric>2.805</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #13]</IDAndCode>
          <ValueText>2.970 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x2F85" />
          <ValueNumeric>2.97</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>12</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #14]</IDAndCode>
          <ValueText>EXP =-13</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x13" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #14]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #14]</IDAndCode>
          <ValueText>Voltage: 2.472 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x1C4F" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #14]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #14]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #14]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #14]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #14]</IDAndCode>
          <ValueText>2.125 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4400" />
          <ValueNumeric>2.125</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #14]</IDAndCode>
          <ValueText>2.250 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4800" />
          <ValueNumeric>2.25</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #14]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #14]</IDAndCode>
          <ValueText>0.332 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0AA0" />
          <ValueNumeric>0.332</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #14]</IDAndCode>
          <ValueText>Rail On Dep: Rail #13 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 12 GPIO2 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x9E000000000000001000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #14]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #14]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #14]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #14]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #14]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #14]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #14]</IDAndCode>
          <ValueText>2.500 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5000" />
          <ValueNumeric>2.5</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #14]</IDAndCode>
          <ValueText>2.625 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5400" />
          <ValueNumeric>2.625</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #14]</IDAndCode>
          <ValueText>2.375 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4C00" />
          <ValueNumeric>2.375</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #14]</IDAndCode>
          <ValueText>2.875 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5C00" />
          <ValueNumeric>2.875</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #14]</IDAndCode>
          <ValueText>2.750 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5800" />
          <ValueNumeric>2.75</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #14]</IDAndCode>
          <ValueText>0.500 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB200" />
          <ValueNumeric>0.5</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #14]</IDAndCode>
          <ValueText>2.125 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4400" />
          <ValueNumeric>2.125</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #14]</IDAndCode>
          <ValueText>2.250 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4800" />
          <ValueNumeric>2.25</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>13</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #15]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #15]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #15]</IDAndCode>
          <ValueText>Voltage: 1.222 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x344E" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #15]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #15]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL,STORE_DEFAULT_ALL_DONE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000240" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #15]</IDAndCode>
          <ValueText>Mode: Always Converting</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #15]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #15]</IDAndCode>
          <ValueText>1.020 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4148" />
          <ValueNumeric>1.02</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #15]</IDAndCode>
          <ValueText>1.080 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x451F" />
          <ValueNumeric>1.08</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #15]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #15]</IDAndCode>
          <ValueText>0.166 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0AA0" />
          <ValueNumeric>0.166</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #15]</IDAndCode>
          <ValueText>Rail On Dep: Rail #14 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: &lt;None&gt; | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 13 GPIO3 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0xA6000000000000002000000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #15]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #15]</IDAndCode>
          <ValueText>0.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #15]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #15]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #15]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #15]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #15]</IDAndCode>
          <ValueText>1.200 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4CCD" />
          <ValueNumeric>1.2</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #15]</IDAndCode>
          <ValueText>1.260 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x50A4" />
          <ValueNumeric>1.26</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #15]</IDAndCode>
          <ValueText>1.140 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x48F6" />
          <ValueNumeric>1.14</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #15]</IDAndCode>
          <ValueText>1.380 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5852" />
          <ValueNumeric>1.38</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #15]</IDAndCode>
          <ValueText>1.320 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x547B" />
          <ValueNumeric>1.32</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #15]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #15]</IDAndCode>
          <ValueText>1.020 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4148" />
          <ValueNumeric>1.02</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #15]</IDAndCode>
          <ValueText>1.080 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x451F" />
          <ValueNumeric>1.08</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>14</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MODE</ID>
          <Code>32</Code>
          <IDAndCode>VOUT_MODE [0x20,Rail #16]</IDAndCode>
          <ValueText>EXP =-14</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x12" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>FAULT_RESPONSES</ID>
          <Code>233</Code>
          <IDAndCode>FAULT_RESPONSES [MFR 25,0xE9,Rail #16]</IDAndCode>
          <ValueText>Retry Time: 0 msec| Max Volt Glitch Time: 0.0 msec| Max Other Glitch Time: 0 msec| VOUT_OV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| VOUT_UV: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A| TON_MAX: Resequence: Disabled; Glitch filter: Disabled; Response: Ignore; Restart: N/A</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x000000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>LOGGED_PAGE_PEAKS</ID>
          <Code>237</Code>
          <IDAndCode>LOGGED_PAGE_PEAKS [MFR 29,0xED,Rail #16]</IDAndCode>
          <ValueText>Voltage: 1.438 V</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x085C" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MARGIN_CONFIG</ID>
          <Code>245</Code>
          <IDAndCode>MARGIN_CONFIG [MFR 37,0xF5,Rail #16]</IDAndCode>
          <ValueText>Mode: Disabled; Increase Duty Cycle decreases Voltage; Ignore Faults: False; PWM Pin: ID 0, # 17 FPWM1_GPIO5</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>MFR_STATUS</ID>
          <Code>243</Code>
          <IDAndCode>MFR_STATUS [MFR 35,0xF3,Rail #16]</IDAndCode>
          <ValueText>LOGGED_FAULT_DETAIL_FULL</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x00000040" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>ON_OFF_CONFIG</ID>
          <Code>2</Code>
          <IDAndCode>ON_OFF_CONFIG [0x02,Rail #16]</IDAndCode>
          <ValueText>Mode: CONTROL Pin Only; Control: Active High, Use TOFF_DELAY/TOFF_FALL</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x16" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>OPERATION</ID>
          <Code>1</Code>
          <IDAndCode>OPERATION [0x01,Rail #16]</IDAndCode>
          <ValueText>Unit: ImmediateOff; Margin: None</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_OFF</ID>
          <Code>95</Code>
          <IDAndCode>POWER_GOOD_OFF [0x5F,Rail #16]</IDAndCode>
          <ValueText>1.148 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4979" />
          <ValueNumeric>1.148</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>POWER_GOOD_ON</ID>
          <Code>94</Code>
          <IDAndCode>POWER_GOOD_ON [0x5E,Rail #16]</IDAndCode>
          <ValueText>1.215 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4DC3" />
          <ValueNumeric>1.215</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_RAIL_STATE</ID>
          <Code>185</Code>
          <IDAndCode>READ_RAIL_STATE [0xB9,Rail #16]</IDAndCode>
          <ValueText>IDLE</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x01" />
          <ParameterType>String</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>READ_VOUT</ID>
          <Code>139</Code>
          <IDAndCode>READ_VOUT [0x8B,Rail #16]</IDAndCode>
          <ValueText>0.167 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0AAC" />
          <ValueNumeric>0.167</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>SEQ_CONFIG</ID>
          <Code>246</Code>
          <IDAndCode>SEQ_CONFIG [MFR 38,0xF6,Rail #16]</IDAndCode>
          <ValueText>Rail On Dep: Rail #12 | GPI On Dep: &lt;None&gt; | GPO On Dep: &lt;None&gt; | Rail Off Dep: Rail #8 | GPI Off Dep: &lt;None&gt; | GPO Off Dep: &lt;None&gt; | Fault Dep: &lt;None&gt; | Enable: Pin 19 FPWM3_GPIO7 ActiveHigh ActivelyDrivenOutput; Seq On Timeout: 0 / Wait Indefinitely; Seq Off Timeout: 0 / Wait Indefinitely</ValueText>
          <ValueEncoded xsi:type="PMBusBlock" Hex="0x16000000000000000800008000000000" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>STATUS_VOUT</ID>
          <Code>122</Code>
          <IDAndCode>STATUS_VOUT [0x7A,Rail #16]</IDAndCode>
          <ValueText>&lt;EMPTY&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusByte" Hex="0x00" />
          <ParameterType>Bitmask</ParameterType>
          <ParameterCategory>Status</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_DELAY</ID>
          <Code>100</Code>
          <IDAndCode>TOFF_DELAY [0x64,Rail #16]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TOFF_MAX_WARN_LIMIT</ID>
          <Code>102</Code>
          <IDAndCode>TOFF_MAX_WARN_LIMIT [0x66,Rail #16]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x7FFF" />
          <ParameterType>Custom</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_DELAY</ID>
          <Code>96</Code>
          <IDAndCode>TON_DELAY [0x60,Rail #16]</IDAndCode>
          <ValueText>1.0 ms</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xB3FF" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>TON_MAX_FAULT_LIMIT</ID>
          <Code>98</Code>
          <IDAndCode>TON_MAX_FAULT_LIMIT [0x62,Rail #16]</IDAndCode>
          <ValueText>&lt;No Limit&gt;</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x8000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>TimeOneDigitMilliseconds</ParameterType>
          <ParameterCategory>OnOff</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_CAL_MONITOR</ID>
          <Code>209</Code>
          <IDAndCode>VOUT_CAL_MONITOR [MFR 01,0xD1,Rail #16]</IDAndCode>
          <ValueText>0.000 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x0000" />
          <ValueNumeric>0</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_COMMAND</ID>
          <Code>33</Code>
          <IDAndCode>VOUT_COMMAND [0x21,Rail #16]</IDAndCode>
          <ValueText>1.350 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5666" />
          <ValueNumeric>1.35</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_HIGH</ID>
          <Code>37</Code>
          <IDAndCode>VOUT_MARGIN_HIGH [0x25,Rail #16]</IDAndCode>
          <ValueText>1.418 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5AC1" />
          <ValueNumeric>1.418</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_MARGIN_LOW</ID>
          <Code>38</Code>
          <IDAndCode>VOUT_MARGIN_LOW [0x26,Rail #16]</IDAndCode>
          <ValueText>1.283 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x521D" />
          <ValueNumeric>1.283</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Configuration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_FAULT_LIMIT</ID>
          <Code>64</Code>
          <IDAndCode>VOUT_OV_FAULT_LIMIT [0x40,Rail #16]</IDAndCode>
          <ValueText>1.553 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x6364" />
          <ValueNumeric>1.553</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_OV_WARN_LIMIT</ID>
          <Code>66</Code>
          <IDAndCode>VOUT_OV_WARN_LIMIT [0x42,Rail #16]</IDAndCode>
          <ValueText>1.485 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x5F0A" />
          <ValueNumeric>1.485</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_SCALE_MONITOR</ID>
          <Code>42</Code>
          <IDAndCode>VOUT_SCALE_MONITOR [0x2A,Rail #16]</IDAndCode>
          <ValueText>1.000 </ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0xBA00" />
          <ValueNumeric>1</ValueNumeric>
          <ParameterType>UnitlessThreeDigit</ParameterType>
          <ParameterCategory>Calibration</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_FAULT_LIMIT</ID>
          <Code>68</Code>
          <IDAndCode>VOUT_UV_FAULT_LIMIT [0x44,Rail #16]</IDAndCode>
          <ValueText>1.148 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4979" />
          <ValueNumeric>1.148</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
        <Parameter>
          <ID>VOUT_UV_WARN_LIMIT</ID>
          <Code>67</Code>
          <IDAndCode>VOUT_UV_WARN_LIMIT [0x43,Rail #16]</IDAndCode>
          <ValueText>1.215 V</ValueText>
          <ValueEncoded xsi:type="PMBusWord" Hex="0x4DC3" />
          <ValueNumeric>1.215</ValueNumeric>
          <ParameterType>Voltage</ParameterType>
          <ParameterCategory>Limits</ParameterCategory>
          <Page>15</Page>
          <Phase xsi:nil="true" />
          <CustomIndex xsi:nil="true" />
        </Parameter>
      </Parameters>
      <Custom xsi:type="CustomProjectData">
        <Logged_Fault_Detail2 />
      </Custom>
    </Device>
  </Devices>
  <Use_Old_UCD92XX_CLA_Gains>true</Use_Old_UCD92XX_CLA_Gains>
</ProjectData>