
                                PLANES PROCESSOR
                                ----------------

                      11:05 AM Wednesday, January 26, 2011
 Job Name: X:\EvmBoards\DRVxxxx\DRV8412\DRV8412EVM_RevG\PCB\DRV8412EVM_RevG.pcb




    POSITIVE PLANE LAYER : 1

        Plane Shapes Found On This Layer : 14
        Plane Holes  Found On This Layer : 8


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.250mm
            Plane To Other Metal Clearance    : 0.000mm
            Mounting Hole / Contour Clearance : 0.152mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.500mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.750mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.500mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.250mm
            Default Hatch Distance            : 0.250mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 325
            Total Thru Pads Of This Net       : 72
            Total SMD  Pads Of This Net       : 84

            Plane Created : Layer 1 - Net GND

                Via Pads In This Plane           : 317
                Thru Pads In This Plane          : 72
                SMD Pads In This Plane           : 72
                     
                Pads To Be Buried In Plane       : 436
                    Unconnected To Plane         : 1
                        Connected To Trace       : 1
                Pads With 4/4 Tie Connections    : 10
                Pads With 3/4 Tie Connections    : 5
                Pads With 2/4 Tie Connections    : 4
                Pads With 1/4 Tie Connection     : 6

                    Pads With 3 Tie Legs : 5
                        Coordinates (mm) :
                                1) X=12.047      Y=40.275        Pin: J1-58  
                                2) X=23.625      Y=79.355        Pin: C17-2  
                                3) X=26.891      Y=96.500        Pin: C13-2  
                                4) X=35.141      Y=96.375        Pin: C15-2  
                                5) X=39.359      Y=94.000        Pin: C31-2  

                    Pads With 2 Tie Legs : 4
                        Coordinates (mm) :
                                1) X=12.047      Y=42.815        Pin: J1-60  
                                2) X=13.953      Y=82.185        Pin: J1-37  
                                3) X=15.858      Y=40.275        Pin: J1-8  
                                4) X=15.858      Y=47.895        Pin: J1-14  

                    Pads With 1 Tie Legs : 6
                        Coordinates (mm) :
                                1) X=12.047      Y=45.355        Pin: J1-62  
                                2) X=12.047      Y=47.895        Pin: J1-64  
                                3) X=13.953      Y=69.485        Pin: J1-27  
                                4) X=13.953      Y=94.885        Pin: J1-47  
                                5) X=15.858      Y=42.815        Pin: J1-10  
                                6) X=15.858      Y=45.355        Pin: J1-12  


    POSITIVE PLANE LAYER : 2

        Plane Shapes Found On This Layer : 2
        Plane Holes  Found On This Layer : 4


        PLANE NET : GND

            Total Plane Shapes For This Net   : 1
            Use Route Border As Plane Shape   : NO
            Create Actual Plane Shapes        : NO
            Regenerate APS Connections Only   : NO
            Generate Plane Data               : YES
            Plane To Plane Clearance          : 0.250mm
            Plane To Other Metal Clearance    : 0.000mm
            Mounting Hole / Contour Clearance : 0.300mm
            Minimum Plane Gap Distance        : NA
            Use TieLeg Bridges If Needed      : YES
            Use Padstack Thermal Definition   : YES
            Default Via Tie Properties
                Tie Leg Width                 : 0.500mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default Thru Tie Properties
                Tie Leg Width                 : 0.750mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Default SMD Tie Properties
                Tie Leg Width                 : 0.500mm
                Thermal Clearance             : 0.300mm
                Number Tie Legs               : FOUR
                Tie Orientation               : PREFER 0
            Eliminate Untied Areas            : YES
            Eliminate Single Tied Areas       : NO
            Orthogonal Data Only              : NO
            Discard Areas By Dimension        : NO
            Default Hatch Width               : 0.250mm
            Default Hatch Distance            : 0.250mm
            Default Hatch Pattern             : (|) Vertical
            Default Metal Percentage          : 100.00

            Total Via  Pads Of This Net       : 325
            Total Thru Pads Of This Net       : 72
            Total SMD  Pads Of This Net       : 0

            Plane Created : Layer 2 - Net GND

                Via Pads In This Plane           : 317
                Thru Pads In This Plane          : 72
                SMD Pads In This Plane           : 0
                     
                Pads To Be Buried In Plane       : 371
                    Unconnected To Plane         : 0
                        Connected To Trace       : 0
                Pads With 4/4 Tie Connections    : 13
                Pads With 3/4 Tie Connections    : 3
                Pads With 2/4 Tie Connections    : 1
                Pads With 0/4 Tie Connections    : 1

                Total With 0 Tie Connections     : 1
                    Connected To Trace           : 0

                No tieleg connections were due to isolation from plane,
                or the tielegs would have violated clearance requirements,
                or no tielegs were assigned to be created,
                or the pad belongs to a Routed Plane Pin,
                or the pad was a TestPad on top of another connected pad,
                or the pad was contained in a Plane No Connect Area.

                    Total Pads Not Connected : 1
                        Coordinates (mm) :
                                1) X=13.953      Y=82.185        Pin: J1-37  

                    Pads With 3 Tie Legs : 3
                        Coordinates (mm) :
                                1) X=13.953      Y=69.485        Pin: J1-27  
                                2) X=26.891      Y=96.500        Pin: C13-2  
                                3) X=35.141      Y=96.375        Pin: C15-2  

                    Pads With 2 Tie Legs : 1
                        Coordinates (mm) :
                                1) X=39.359      Y=94.000        Pin: C31-2  



                        11:05 AM Wednesday, January 26, 2011