/* * Copyright (c) 2015-2016, Texas Instruments Incorporated * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** ============================================================================ * @file CC2650STK.h * * @brief CC2650SENSORTAG Board Specific header file. * * NB! This is the board file for PCB versions 1.2 and 1.3 * * ============================================================================ */ #ifndef __CC2650STK_SENSORTAG_BOARD_H__ #define __CC2650STK_SENSORTAG_BOARD_H__ #ifdef __cplusplus extern "C" { #endif /** ============================================================================ * Includes * ==========================================================================*/ #include #include /** ============================================================================ * Externs * ==========================================================================*/ extern const PIN_Config BoardGpioInitTable[]; /** ============================================================================ * Defines * ==========================================================================*/ /* Same RF Configuration as 7x7 EM */ #define CC2650EM_7ID /* Mapping of pins to board signals using general board aliases * */ /* Discrete outputs */ #define Board_STK_LED1 IOID_10 #define Board_STK_LED2 IOID_15 #define Board_BUZZER IOID_21 #define Board_LED_ON 1 #define Board_LED_OFF 0 #define Board_BUZZER_ON 1 #define Board_BUZZER_OFF 0 /* Discrete inputs */ #define Board_KEY_LEFT IOID_0 #define Board_KEY_RIGHT IOID_4 #define Board_RELAY IOID_3 /* Sensor outputs */ #define Board_MPU_INT IOID_7 #define Board_TMP_RDY IOID_1 /* I2C */ #define Board_I2C0_SDA0 IOID_5 #define Board_I2C0_SCL0 IOID_6 #define Board_I2C0_SDA1 IOID_8 #define Board_I2C0_SCL1 IOID_9 /* SPI */ #define Board_SPI_FLASH_CS IOID_14 #define Board_SPI_DEVPK_CS IOID_20 #define Board_FLASH_CS_ON 0 #define Board_FLASH_CS_OFF 1 #define Board_DEVPK_CS_ON 1 #define Board_DEVPK_CS_OFF 0 #define Board_SPI0_MISO IOID_18 #define Board_SPI0_MOSI IOID_19 #define Board_SPI0_CLK IOID_17 #define Board_SPI0_CSN PIN_UNASSIGNED #define Board_SPI1_MISO PIN_UNASSIGNED #define Board_SPI1_MOSI PIN_UNASSIGNED #define Board_SPI1_CLK PIN_UNASSIGNED #define Board_SPI1_CSN PIN_UNASSIGNED /* UART when connected to SRF06EB */ #define Board_EB_UART_TX IOID_16 #define Board_EB_UART_RX IOID_17 /* Power control */ #define Board_MPU_POWER IOID_12 #define Board_MPU_POWER_ON 1 #define Board_MPU_POWER_OFF 0 /* Audio */ #define Board_MIC_POWER IOID_13 #define Board_MIC_POWER_ON 1 #define Board_MIC_POWER_OFF 0 #define Board_AUDIO_DI IOID_2 #define Board_AUDIO_CLK IOID_11 /* UART pins used by driver */ #define Board_UART_TX Board_DP5_UARTTX #define Board_UART_RX Board_DP4_UARTRX /* DevPack common */ #define Board_AUDIOFS_TDO IOID_16 #define Board_AUDIODO IOID_22 #define Board_DP2 IOID_23 #define Board_DP1 IOID_24 #define Board_DP0 IOID_25 #define Board_DP3 IOID_27 #define Board_DP4_UARTRX IOID_28 #define Board_DP5_UARTTX IOID_29 #define Board_DEVPK_ID IOID_30 #define Board_SPI_DEVPK_CS IOID_20 /* LCD DevPack */ #define Board_LCD_EXTCOMIN IOID_22 #define Board_LCD_EXTMODE IOID_28 #define Board_LCD_ENABLE IOID_29 #define Board_LCD_POWER PIN_UNASSIGNED #define Board_LCD_CS Board_SPI_DEVPK_CS #define Board_LCD_CS_ON 1 #define Board_LCD_CS_OFF 0 /* LED-Audio DevPack */ #define Board_DEVPK_LIGHT_BLUE IOID_23 #define Board_DEVPK_LIGHT_GREEN IOID_24 #define Board_DEVPK_LIGHT_WHITE IOID_25 #define Board_DEVPK_LIGHT_RED IOID_27 /* PWM outputs */ #define Board_PWMPIN0 Board_STK_LED1 #define Board_PWMPIN1 Board_STK_LED2 #define Board_PWMPIN2 PIN_UNASSIGNED #define Board_PWMPIN3 PIN_UNASSIGNED #define Board_PWMPIN4 PIN_UNASSIGNED #define Board_PWMPIN5 PIN_UNASSIGNED #define Board_PWMPIN6 PIN_UNASSIGNED #define Board_PWMPIN7 PIN_UNASSIGNED /** ============================================================================ * Instance identifiers * ==========================================================================*/ /* Generic I2C instance identifiers */ #define Board_I2C CC2650STK_I2C0 /* Generic PDM instance identifiers */ #define Board_PDM CC2650STK_PDM0 /* Generic SPI instance identifiers */ #define Board_SPI0 CC2650STK_SPI0 #define Board_SPI1 CC2650STK_SPI1 /* Generic UART instance identifiers */ #define Board_UART CC2650STK_UART0 /* Generic Crypto instance identifiers */ #define Board_CRYPTO CC2650STK_CRYPTO0 /* Generic TRNG instance identiifer */ #define Board_TRNG CC2650STK_TRNG0 /* Generic GPTimer instance identifiers */ #define Board_GPTIMER0A CC2650STK_GPTIMER0A #define Board_GPTIMER0B CC2650STK_GPTIMER0B #define Board_GPTIMER1A CC2650STK_GPTIMER1A #define Board_GPTIMER1B CC2650STK_GPTIMER1B #define Board_GPTIMER2A CC2650STK_GPTIMER2A #define Board_GPTIMER2B CC2650STK_GPTIMER2B #define Board_GPTIMER3A CC2650STK_GPTIMER3A #define Board_GPTIMER3B CC2650STK_GPTIMER3B /* Generic PWM instance identifiers */ #define Board_PWM0 CC2650STK_PWM0 #define Board_PWM1 CC2650STK_PWM1 #define Board_PWM2 CC2650STK_PWM2 #define Board_PWM3 CC2650STK_PWM3 #define Board_PWM4 CC2650STK_PWM4 #define Board_PWM5 CC2650STK_PWM5 #define Board_PWM6 CC2650STK_PWM6 #define Board_PWM7 CC2650STK_PWM7 /** ============================================================================ * Number of peripherals and their names * ==========================================================================*/ /*! * @def CC2650STK_I2CName * @brief Enum of I2C names on the CC2650 dev board */ typedef enum CC2650STK_I2CName { CC2650STK_I2C0 = 0, CC2650STK_I2CCOUNT } CC2650STK_I2CName; /*! * @def CC2650STK_CryptoName * @brief Enum of Crypto names on the CC2650 dev board */ typedef enum CC2650STK_CryptoName { CC2650STK_CRYPTO0 = 0, CC2650STK_CRYPTOCOUNT } CC2650STK_CryptoName; /*! * @def CC2650STK_PdmName * @brief Enum of PDM names on the CC2650 dev board */ typedef enum CC2650STK_PDMName { CC2650STK_PDM0 = 0, CC2650STK_PDMCOUNT } CC2650STK_PDMName; /*! * @def CC2650STK_SPIName * @brief Enum of SPI names on the CC2650 dev board */ typedef enum CC2650STK_SPIName { CC2650STK_SPI0 = 0, CC2650STK_SPI1, CC2650STK_SPICOUNT } CC2650STK_SPIName; /*! * @def CC2650STK_TRNGName * @brief Enum of TRNG names on the board */ typedef enum CC2650STK_TRNGName { CC2650STK_TRNG0 = 0, CC2650STK_TRNGCOUNT } CC2650STK_TRNGName; /*! * @def CC2650STK_UARTName * @brief Enum of UARTs on the CC2650 dev board */ typedef enum CC2650STK_UARTName { CC2650STK_UART0 = 0, CC2650STK_UARTCOUNT } CC2650STK_UARTName; /*! * @def CC2650STK_UdmaName * @brief Enum of DMA buffers */ typedef enum CC2650STK_UdmaName { CC2650STK_UDMA0 = 0, CC2650STK_UDMACOUNT } CC2650STK_UdmaName; /*! * @def CC2650STK_GPTimerName * @brief Enum of GPTimer parts */ typedef enum CC2650STK_GPTimerName { CC2650STK_GPTIMER0A = 0, CC2650STK_GPTIMER0B, CC2650STK_GPTIMER1A, CC2650STK_GPTIMER1B, CC2650STK_GPTIMER2A, CC2650STK_GPTIMER2B, CC2650STK_GPTIMER3A, CC2650STK_GPTIMER3B, CC2650STK_GPTIMERPARTSCOUNT } CC2650STK_GPTimerName; /*! * @def CC2650STK_GPTimers * @brief Enum of GPTimers */ typedef enum CC2650STK_GPTimers { CC2650STK_GPTIMER0 = 0, CC2650STK_GPTIMER1, CC2650STK_GPTIMER2, CC2650STK_GPTIMER3, CC2650STK_GPTIMERCOUNT } CC2650STK_GPTimers; /*! * @def CC2650STK_PWM * @brief Enum of PWM outputs on the board */ typedef enum CC2650STK_PWM { CC2650STK_PWM0 = 0, CC2650STK_PWM1, CC2650STK_PWM2, CC2650STK_PWM3, CC2650STK_PWM4, CC2650STK_PWM5, CC2650STK_PWM6, CC2650STK_PWM7, CC2650STK_PWMCOUNT } CC2650STK_PWM; #ifdef __cplusplus } #endif #endif /* __CC2650STK_SENSORTAG_BOARD_H__ */