Example Summary
----------------
This example is intended to be a starting point for new development where
a minimal footprint is needed.

Peripherals Exercised
---------------------
Board_LED0  Toggled by heartBeat task
Board_LED1  Indicates that the board was initialized within main()

Example Usage
-------------
The example lights Board_LED1 as part of the initialization in main().
Then a heartBeat task toggles LED0 at a rate determined by the arg0 parameter
for the constructed Task instance in the .c file.

Application Design Details
--------------------------
This examples is the same as the "Empty" example except many development
and debug features have been removed. For example:
    - No Kernel Idle task
    - No stack overflow checking
    - No Logs or Asserts are enabled

Please refer to the "Memory Footprint Reduction" section in the TI-RTOS User
Guide (spruhd4.pdf) for a complete and detailed list of the differences
between the empty minimal and empty projects.

Please note that the ROM is being used in this example. This is controlled
by the following lines in the .cfg file:
    var ROM = xdc.useModule('ti.sysbios.rom.ROM');
    ROM.romName = ROM.CC2650;

Since the kernel in the ROM is being used, there is no logging or assert
checking done by the kernel.

Note: For IAR users using any SensorTag(STK) Board, the XDS110 debugger must be
selected with the 4-wire JTAG connection within your projects' debugger
configuration.

For GNU and IAR users, please read the following website for details about semi-hosting
http://processors.wiki.ti.com/index.php/TI-RTOS_Examples_SemiHosting.
