D - 3111 - Auth Metadata D - 12993 - QSEE Dev Config - Image Loaded, Delta - (41096 Bytes) B - 1336296 - QSEE - Image Load, Start D - 13420 - Auth Metadata D - 155825 - QSEE - Image Loaded, Delta - (1966320 Bytes) B - 1492395 - DTB: Vibration Enabled D - 5612 - sbl1_hw_play_vibr B - 1501332 - SEC - Image Load, Start D - 2562 - Auth Metadata D - 8540 - SEC - Image Loaded, Delta - (4144 Bytes) D - 0 - qhee_load_cancel B - 1516216 - QHEE - Image Load, Start D - 13084 - Auth Metadata D - 95282 - QHEE - Image Loaded, Delta - (1207624 Bytes) B - 1611498 - IPA_FW - Image Load, Start D - 5642 - IPA_FW - Image Loaded, Delta - (0 Bytes) B - 1621136 - QUP_FW - Image Load, Start D - 30 - xbl_efs1_init B - 1630408 - EFS1 - Image Load, Start D - 2775 - EFS1 - Image Loaded, Delta - (0 Bytes) D - 0 - xbl_efs2_init B - 1642089 - EFS2 - Image Load, Start D - 2776 - EFS2 - Image Loaded, Delta - (0 Bytes) D - 0 - xbl_efs3_init B - 1653801 - EFS3 - Image Load, Start D - 2776 - EFS3 - Image Loaded, Delta - (0 Bytes) B - 1660420 - TOOLS FV - Image Load, Start D - 0 - xbl_add_ram_partition_table_apps_domain B - 1669692 - QUANTUM FV - Image Load, Start D - 0 - xbl_add_ram_partition_table_apps_domain B - 1679147 - QUEST FV - Image Load, Start D - 0 - xbl_add_ram_partition_table_apps_domain D - 0 - xbl_acdb_init B - 1693482 - ACDB - Image Load, Start D - 2775 - ACDB - Image Loaded, Delta - (0 Bytes) B - 1700100 - Q6 Root PD DTB - Image Load, Start B - 1705194 - Q6 Root PD - Image Load, Start D - 0 - boot_kernel_load B - 1714283 - TN APPS - Image Load, Start D - 0 - xbl_add_ram_partition_table_apps_domain B - 1721420 - APPSBL - Image Load, Start D - 3385 - Auth Metadata D - 175466 - APPSBL - Image Loaded, Delta - (2663008 Bytes) D - 31 - sbl1_save_appsbl_index B - 1902864 - SBL1, End D - 1549949 - SBL1, Delta S - Flash Throughput, 16058 KB/s (6359358 Bytes, 396437 us) S - DDR Frequency, 2092 MHz 0 2.288999 Hypervisor cold boot, version: gunyah-7f2002428 perf (2023-11-02 02:13:43 UTC) 0 2.307884 Failed to register KP [RM]Resource Manager version: 6e66bc3a (Tue Oct 31 06:55:08 2023 UTC) [RM]HLOS is RAS handler [RM]Error: src/utils/address_range_allocator.c 239: 1 [RM]Error: src/utils/address_range_allocator.c 239: 1 [RM]Init completed, disabling UART 0 2.358273 Hypervisor UART is disabled! UEFI Start [ 2363] - 0x087501000 [ 2366] Sec.efi ASLR : ON DEP : ON (RTB) Timer Delta : +1 mS RAM Entry 0 : Base 0x0080000000 Size 0x0000500000 RAM Entry 1 : Base 0x0081400000 Size 0x00000E0000 RAM Entry 2 : Base 0x0081778000 Size 0x0000008000 RAM Entry 3 : Base 0x0082180000 Size 0x001DE80000 RAM Entry 4 : Base 0x00A0000000 Size 0x001EE00000 RAM Entry 5 : Base 0x00BEFC0000 Size 0x0000E40000 RAM Entry 6 : Base 0x0080600000 Size 0x0000D80000 RAM Available : 1006 MB (0x003EE28000) RAM Installed : 1024 MB (0x0040000000) Minidump : ON Init 1 aux cores of 3 Init CPU core 1 Continue booting UEFI on Core 0 > Scheduler up on Core 1 UEFI Ver : 6.0.240421.BOOT.MXF.2.3-00354-PINNACLES-1 Build Info : 64b Apr 21 2024 22:49:32 Boot Device : NAND PROD Mode : TRUE Retail : TRUE IsArmV8Smc() return TRUE RecoveryState : 0x3 - RecoveryInfo Recovery Enabled tz_armv8_smc_call failed, TzStatus = 0xFFFFFFFE, SmcId = 0x3200010A QseeResponse->result = 0xFFFFFEE5 Status = 0x7 GetBootSet : ImageSet to Boot: 0x0 LoadImageFromPartitionUsingGuid Failed: 14 Unable to load cmnlib using label Status:14 LoadImageFromPartitionUsingGuid Failed: 14 Able to load cmnlib64 using label Status:0 HW Wdog Setting from PCD : Disabled GetBootSet : ImageSet to Boot: 0x0 UsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLibOpenProtocols: PMI version (0x51) ChipId = 0x22Fusb_repeater_init, tuning_allowed: 1 WRITING: reg: 0xFD51, data: 9, res = 0 WRITING: reg: 0xFD54, data: 3, res = 0 WRITING: reg: 0xFD57, data: 2, res = 0 UsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLibOpenProtocols: PMI version (0x51) UsbConfigIsAutoChipinfoID: UsbConfigIsAutoChipinfoID: ChipId = 0x22F ButtonsDxeTest: Keypress SDAM data payload 0 GetBootSet : ImageSet to Boot: 0x0 WaitParallelThreads InIt [ 2808] Var Store : WARNING, not persistent UEFI Ver : 6.0.240421.BOOT.MXF.2.3-00354-PINNACLES-1 Platform : IDP Subtype : 0 Boot Device : Nand Chip Name : SA_PINNACLES_L Chip Ver : 1.0 Chip ECID : 0x0443F2A70361 ----------------------------- LaunchAppFromGuidedFv: Load image from guided FV failed, Not Found Failed to launch default charger app, status: Not Found UEFI Total : 457 ms POST Time [ 2820] OS Loader [2826]Loader Build Info: Apr 23 2024 02:47:14 VB: Non-secure device: Security State: (0xFDF3F) VB: RWDeviceState: Succeed using devinfo! GetBootSet : ImageSet to Boot: 0x0 [2845]Total DDR Size: 0x000000003EE28000 [2846]KeyPress:0, BootReason:0 [2846]Fastboot=0, Recovery:0 [2846]SilentBoot Mode:11 [2847]Booting Into Mission Mode [2860]Loading Image boot Done : 12 ms, Image size : 4096 Bytes [4564]Loading Image boot Done : 1705 ms, Image size : 30515200 Bytes [4580]Loading Image dtbo Done : 15 ms, Image size : 262144 Bytes VB: DeviceInit: Device is unlocked! Skipping verification! [4616]VB: LoadImageAndAuthForLE complete! GetBootSet : ImageSet to Boot: 0x0 LoadImageFromPartitionUsingGuid Failed: 14 Keymaster failed to load! Status = 0xE LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 1 QseeResponse->result = 0xFFFFFFFF Status = 0x7 [4710]KeyMasterSetRotForLE success [4710]Hyp version: 1 [4710]Silent Mode value: 11 [4711]Memory Base Address: 0x80000000 [4723]Override DTB: GetBlkIOHandles failed loading user_dtbo! [4805]Apply Overlay total time: 82 ms tz_armv8_smc_call failed, TzStatus = 0xFFFFFFFF, SmcId = 0x2001901 [4806]ScmSipSysCall() failed, Status = (0x3) [4807]Unknown Boot Device type detected [4807]Failed to get Boot Device: Not Found [4807]Unable to get Panel Config, Not Found [4807]Unable to get hw fence Config, Not Found [4807]Unable to get GPU Preempt Config, Not Found [4807]Offlining Memory Not Supported [4809]Loading Image emac Done : 1 ms, Image size : 4096 Bytes [4809]Cmdline: ro rootwait console=ttyMSM0,115200,n8 no_console_suspend=1 androidboot.console=ttyMSM0 lpm_levels.sleep_disabled=1 firmware_class.path=/lib/firmware/updates,/vm-bootsys/boot service_locator.enable=1 net.ifnames=0 root=/dev/ram rootfstype=ramfs in[4812]Final RAM Partitions [4812]Add Base: 0x0000000081400000 Available Length: 0x00000000000E0000 [4812]Add Base: 0x0000000082180000 Available Length: 0x0000000005880000 [4812]Add Base: 0x0000000087BC0000 Available Length: 0x0000000000040000 [4812]Add Base: 0x0000000087D90000 Available Length: 0x0000000000070000 [4813]Add Base: 0x0000000087F85000 Available Length: 0x000000000057B000 [4813]Add Base: 0x000000009DD00000 Available Length: 0x0000000002300000 [4813]Add Base: 0x00000000A0000000 Available Length: 0x000000001EE00000 [4813]Add Base: 0x00000000BEFC0000 Available Length: 0x0000000000E40000 [4813]Add Base: 0x0000000080600000 Available Length: 0x0000000000D80000 [4823]Unable to get splash buffer info, Not Found [4823]Unable to get splash buffer info, Not Found [4828]PartialGoods Value: 0x0 [4828]Update Device Tree total time: 16 ms [4828] Shutting Down UEFI Boot Services: 4828 ms Start EBS [ 4828] BDS: LogFs sync skipped, No Media App Log Flush : 125 ms ScmArmV8ExitBootServicesHandler, Status = 0x0. ExitBootServicesScmDxeV8EventHandler TZ SMC call t=125ms Exit EBS [ 4963] UEFI End [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000][ T0] Linux version 5.15.104-debug-g6812784dff8f-dirty (build-user@build-host) (Android (8508608, based on r450784e) clang version 14.0.7 (https://android.googlesource.com/toolchain/llvm-project 4c603efb0cca074e9238af8b4106c30add4418f6), LLD 14.0.7) #1 SMP PREEMPT Sun Apr 21 14:26:25 UTC 2024 [ 0.000000][ T0] Machine model: Qualcomm Technologies, Inc. SA522 IDP Overlay [ 0.000000][ T0] efi: UEFI not found. [ 0.000000][ T0] OF: reserved mem: 0x00000000bfc00000..0x00000000bfdfffff (2048 KiB) map non-reusable ramoops_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bd800000, size 20 MiB [ 0.000000][ T0] OF: reserved mem: initialized node cnss_wlan_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bd800000..0x00000000bebfffff (20480 KiB) map reusable cnss_wlan_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bf400000, size 8 MiB [ 0.000000][ T0] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bf400000..0x00000000bfbfffff (8192 KiB) map reusable qseecom_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bb800000, size 32 MiB [ 0.000000][ T0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bb800000..0x00000000bd7fffff (32768 KiB) map reusable linux,cma [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bf000000, size 4 MiB [ 0.000000][ T0] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bf000000..0x00000000bf3fffff (4096 KiB) map reusable qseecom_ta_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bb000000, size 8 MiB [ 0.000000][ T0] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bb000000..0x00000000bb7fffff (8192 KiB) map reusable mem_dump_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000ba000000, size 16 MiB [ 0.000000][ T0] OF: reserved mem: initialized node va_md_mem_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000ba000000..0x00000000baffffff (16384 KiB) map reusable va_md_mem_region [ 0.000000][ T0] OF: reserved mem: 0x0000000015800000..0x0000000015ffffff (8192 KiB) nomap non-reusable llcc_tcm_region@15800000 [ 0.000000][ T0] OF: reserved mem: 0x0000000080000000..0x00000000805fffff (6144 KiB) nomap non-reusable gunyah_hyp_region@80000000 [ 0.000000][ T0] OF: reserved mem: 0x0000000081380000..0x00000000813fffff (512 KiB) nomap non-reusable access_control_db_region@81380000 [ 0.000000][ T0] OF: reserved mem: 0x00000000814e0000..0x000000008177ffff (2688 KiB) nomap non-reusable qteetz_region@814e0000 [ 0.000000][ T0] OF: reserved mem: 0x0000000081780000..0x000000008217ffff (10240 KiB) nomap non-reusable trusted_apps_region@81780000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087a00000..0x0000000087bbffff (1792 KiB) nomap non-reusable xbl_ramdump_region@87a00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087c00000..0x0000000087cfffff (1024 KiB) nomap non-reusable cpucp_fw_region@87c00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d00000..0x0000000087d3ffff (256 KiB) nomap non-reusable xbl_dtlog_region@87d00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d40000..0x0000000087d7ffff (256 KiB) nomap non-reusable xbl_sc_region@87d40000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d80000..0x0000000087d8ffff (64 KiB) nomap non-reusable modem_efs_shared_region@87d80000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087e00000..0x0000000087e1ffff (128 KiB) nomap non-reusable aop_image_region@87e00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087e20000..0x0000000087edffff (768 KiB) nomap non-reusable smem_region@87e20000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087ee0000..0x0000000087efffff (128 KiB) nomap non-reusable aop_cmd_db_region@87ee0000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f00000..0x0000000087f1ffff (128 KiB) nomap non-reusable aop_config_region@87f00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f20000..0x0000000087f2ffff (64 KiB) nomap non-reusable ipa_fw_region@87f20000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f30000..0x0000000087f30fff (4 KiB) nomap non-reusable secdata_region@87f30000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f31000..0x0000000087f70fff (256 KiB) nomap non-reusable tme_crashdump_region@87f31000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f71000..0x0000000087f74fff (16 KiB) nomap non-reusable tme_log_region@87f71000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f75000..0x0000000087f84fff (64 KiB) nomap non-reusable uefi_log@87f75000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088500000..0x00000000887fffff (3072 KiB) nomap non-reusable qdss_region@88500000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088800000..0x0000000088afffff (3072 KiB) nomap non-reusable qlink_logging@88800000 [ 0.000000][ T0] Reserved memory: created DMA memory pool at 0x0000000088b00000, size 4 MiB [ 0.000000][ T0] OF: reserved mem: initialized node audio_heap_region@88b00000, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x0000000088b00000..0x0000000088efffff (4096 KiB) nomap non-reusable audio_heap_region@88b00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088f00000..0x00000000896fffff (8192 KiB) nomap non-reusable mpss_dsmharq2_region@88f00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000089700000..0x000000008df7ffff (74240 KiB) nomap non-reusable mpss_dsmharq_region@89700000 [ 0.000000][ T0] OF: reserved mem: 0x000000008df80000..0x000000008dffffff (512 KiB) nomap non-reusable q6_mpss_dtb_region@8df80000 [ 0.000000][ T0] OF: reserved mem: 0x000000008e000000..0x000000009dcfffff (259072 KiB) nomap non-reusable mpssadsp_region@8e000000 [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] DMA [mem 0x0000000080600000-0x00000000bfdfffff] [ 0.000000][ T0] DMA32 empty [ 0.000000][ T0] Normal empty [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000080600000-0x000000008137ffff] [ 0.000000][ T0] node 0: [mem 0x0000000081400000-0x00000000814dffff] [ 0.000000][ T0] node 0: [mem 0x0000000082180000-0x00000000879fffff] [ 0.000000][ T0] node 0: [mem 0x0000000087bc0000-0x0000000087bfffff] [ 0.000000][ T0] node 0: [mem 0x0000000087d90000-0x0000000087dfffff] [ 0.000000][ T0] node 0: [mem 0x0000000087f85000-0x00000000884fffff] [ 0.000000][ T0] node 0: [mem 0x000000009dd00000-0x00000000bedfffff] [ 0.000000][ T0] node 0: [mem 0x00000000befc0000-0x00000000bfdfffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000080600000-0x00000000bfdfffff] [ 0.000000][ T0] On node 0, zone DMA: 1536 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 3232 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 448 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 400 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 389 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 55296 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 448 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000][ T0] psci: probing for conduit method from DT. [ 0.000000][ T0] psci: PSCIv1.1 detected in firmware. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs [ 0.000000][ T0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000][ T0] psci: SMC Calling Convention v1.3 [ 0.000000][ T0] psci: OSI mode supported. [ 0.000000][ T0] percpu: Embedded 28 pages/cpu s77608 r8192 d28888 u114688 [ 0.000000][ T0] Detected VIPT I-cache on CPU0 [ 0.000000][ T0] CPU features: detected: GIC system register CPU interface [ 0.000000][ T0] CPU features: kernel page table isolation forced OFF by kpti command line option [ 0.000000][ T0] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 164377 [ 0.000000][ T0] Kernel command line: disable_dma32=on swiotlb=noforce kpti=off cpufreq.default_governor=performance pcie_ports=compat msm_rtb.filter=0x237 ftrace_dump_on_oops selinux=0 ro rootwait console=ttyMSM0,115200,n8 no_console_suspend=1 androidboot.console=ttyMSM0 lpm_levels.sleep_disabled=1 firmware_class.path=/lib/firmware/updates,/vm-bootsys/boot service_locator.enable=1 net.ifnames=0 root=/dev/ram rootfstype=ramfs init=/sbin/init androidboot.serialno=f2a70361 androidboot.baseband=msm part.activeboot=boot systemd.setenv="SLOT_SUFFIX=_a" eipv4= eipv6= ermac= ephyaddr= eiface= espeed= silent_boot.mode=nonsilent [ 0.000000][ T0] qcom-ethqos set_early_ethernet_ipv4:499 Invalid ipv4 address programmed: [ 0.000000][ T0] qcom-ethqos set_early_ethernet_ipv6:524 Invalid ipv6 address programmed: [ 0.000000][ T0] qcom-ethqos set_early_ethernet_mac:552 Invalid Mac address programmed: [ 0.000000][ T0] qcom-ethqos set_ethernet_phyaddr:567 Invalid phy addr programmed: [ 0.000000][ T0] qcom-ethqos set_ethernet_speed:619 Invalid link speed programmed: 0 [ 0.000000][ T0] Unknown kernel command line parameters "eipv4= eipv6=", will be passed to user space. [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000][ T0] Memory: 520452K/667948K available (15168K kernel code, 2448K rwdata, 4696K rodata, 768K init, 6710K bss, 57384K reserved, 90112K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000][ T0] kmemleak: Kernel memory leak detector disabled [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU event tracing is enabled. [ 0.000000][ T0] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Rude variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000][ T0] GICv3: 988 SPIs implemented [ 0.000000][ T0] GICv3: 0 Extended SPIs implemented [ 0.000000][ T0] GICv3: Distributor has no Range Selector support [ 0.000000][ T0] Root IRQ handler: gic_handle_irq [ 0.000000][ T0] GICv3: 16 PPIs implemented [ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000017260000 [ 0.000000][ T0] rcu: Offload RCU callbacks from CPUs: (none). [ 0.000000][ T0] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000][ T0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000757][ T0] random: crng init done [ 0.000926][ T0] Console: colour dummy device 80x25 [ 0.000969][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000980][ T0] pid_max: default: 32768 minimum: 301 [ 0.001053][ T0] LSM: Security Framework initializing [ 0.001126][ T0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001138][ T0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002739][ T1] rcu: Hierarchical SRCU implementation. [ 0.003041][ T1] Kprobe smoke test: started [ 0.012784][ T1] Kprobe smoke test: passed successfully [ 0.014279][ T1] EFI services will not be available. [ 0.014622][ T1] smp: Bringing up secondary CPUs ... [ 0.015279][ T0] Detected VIPT I-cache on CPU1 [ 0.015314][ T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000017280000 [ 0.015397][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.016277][ T0] Detected VIPT I-cache on CPU2 [ 0.016306][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000172a0000 [ 0.016373][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.017172][ T0] Detected VIPT I-cache on CPU3 [ 0.017199][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000172c0000 [ 0.017260][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.017346][ T1] smp: Brought up 1 node, 4 CPUs [ 0.017376][ T1] SMP: Total of 4 processors activated. [ 0.017381][ T1] CPU features: detected: 32-bit EL0 Support [ 0.017386][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.017391][ T1] CPU features: detected: Common not Private translations [ 0.017395][ T1] CPU features: detected: CRC32 instructions [ 0.017401][ T1] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.017404][ T1] CPU features: detected: LSE atomic instructions [ 0.017409][ T1] CPU features: detected: Privileged Access Never [ 0.017413][ T1] CPU features: detected: RAS Extension Support [ 0.017418][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.097652][ T1] CPU: All CPU(s) started at EL1 [ 0.097703][ T16] alternatives: patching kernel code [ 0.099178][ T1] devtmpfs: initialized [ 0.128556][ T1] KASLR enabled [ 0.128760][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.128777][ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.129901][ T1] pinctrl core: initialized pinctrl subsystem [ 0.130469][ T1] DMI not present or invalid. [ 0.130887][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.132300][ T1] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.132404][ T1] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.132461][ T1] audit: initializing netlink subsys (disabled) [ 0.132594][ T39] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1 [ 0.132981][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.137680][ T1] cpuidle: using governor menu [ 0.138349][ T1] NET: Registered PF_QIPCRTR protocol family [ 0.138831][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.138942][ T1] ASID allocator initialised with 65536 entries [ 0.141669][ T1] qcom-scm: __get_convention: qcom_scm: convention: smc arm 64 [ 0.141974][ T1] qcom-scm: qcom_scm_query_wq_queue_info: WQ Info, feature: 1 call_ctx_cnt: 2 irq: 962 [ 0.142192][ T1] qtee shmbridge registered default bridge with size 4194304 bytes [ 0.144018][ T1] shmbridge is enabled [ 0.144142][ T1] qcom-scm: scm_mem_protection_init_do: SCM call failed -5, resp 0 [ 0.144150][ T1] MEM protection Not enabled, -5 [ 0.172360][ T1] CPUidle PSCI: Initialized CPU PM domain topology [ 0.185511][ T1] rpmh_regulator_probe: smpk1: could not find RPMh address for resource [ 0.187131][ T1] qcom-memlat soc:qcom,memlat: Failure to probe memlat device: -517 [ 0.193205][ T1] gcc-sdxpinn 80000.clock-controller: Registered GCC clocks [ 0.205769][ T1] msm_sps_probe: sps:sps is ready [ 0.206814][ T1] qnoc-sdxpinn soc:interconnect@0: Registered SDXPINN ICC [ 0.207372][ T1] qnoc-sdxpinn soc:interconnect@1: Registered SDXPINN ICC [ 0.207642][ T1] qnoc-sdxpinn 190e0000.interconnect: Registered SDXPINN ICC [ 0.208248][ T1] qnoc-sdxpinn 19100000.interconnect: Registered SDXPINN ICC [ 0.208630][ T1] qnoc-sdxpinn 16c0000.interconnect: Registered SDXPINN ICC [ 0.209651][ T1] qnoc-sdxpinn 1640000.interconnect: Registered SDXPINN ICC [ 0.214865][ T1] amba 24d22000.funnel: Fixing up cyclic dependency with 24d20000.tpdm [ 0.215341][ T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d0a000.funnel [ 0.215384][ T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d22000.funnel [ 0.215645][ T1] amba 2480d000.funnel: Fixing up cyclic dependency with soc:modem_etm0 [ 0.215938][ T1] amba 2480c000.funnel: Fixing up cyclic dependency with soc:modem_diag [ 0.215985][ T1] amba 2480c000.funnel: Fixing up cyclic dependency with 2480d000.funnel [ 0.216282][ T1] amba 24804000.funnel: Fixing up cyclic dependency with 2480c000.funnel [ 0.216327][ T1] amba 24804000.funnel: Fixing up cyclic dependency with soc:modem2_etm0 [ 0.216624][ T1] amba 24803000.tpda: Fixing up cyclic dependency with 24804000.funnel [ 0.216668][ T1] amba 24803000.tpda: Fixing up cyclic dependency with 24800000.tpdm [ 0.216918][ T1] amba 2480e000.tpda: Fixing up cyclic dependency with 2480c000.funnel [ 0.217221][ T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc1000.tpdm [ 0.217268][ T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc0000.tpdm [ 0.217532][ T1] amba 24cc5000.funnel: Fixing up cyclic dependency with 24cc4000.tpda [ 0.217846][ T1] amba 26863000.tpda: Fixing up cyclic dependency with 26860000.tpdm [ 0.217893][ T1] amba 26863000.tpda: Fixing up cyclic dependency with 268a0000.tpdm [ 0.219388][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26863000.tpda [ 0.219437][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26340000.etm3 [ 0.219479][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26240000.etm2 [ 0.219529][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26140000.etm1 [ 0.219571][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26040000.etm0 [ 0.220050][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c29000.tpdm [ 0.220100][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c28000.tpdm [ 0.220150][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c00000.tpdm [ 0.220192][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24840000.tpdm [ 0.220234][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24854000.tpdm [ 0.220280][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24d03000.funnel [ 0.220606][ T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24d03000.funnel [ 0.220650][ T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24c2b000.tpda [ 0.220947][ T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d0a000.funnel [ 0.220998][ T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d40000.tpdm [ 0.221289][ T1] amba 24004000.tpda: Fixing up cyclic dependency with 24003000.tpdm [ 0.221332][ T1] amba 24004000.tpda: Fixing up cyclic dependency with 2400f000.tpdm [ 0.221694][ T1] amba 24041000.funnel: Fixing up cyclic dependency with 24002000.stm [ 0.221736][ T1] amba 24041000.funnel: Fixing up cyclic dependency with 24004000.tpda [ 0.221785][ T1] amba 24041000.funnel: Fixing up cyclic dependency with soc:snoc [ 0.222170][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24c2c000.funnel [ 0.222218][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 26810000.funnel [ 0.222261][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24804000.funnel [ 0.222308][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24cc5000.funnel [ 0.222606][ T1] amba 24045000.funnel: Fixing up cyclic dependency with 24041000.funnel [ 0.222653][ T1] amba 24045000.funnel: Fixing up cyclic dependency with 24042000.funnel [ 0.223067][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0d000.tpdm [ 0.223116][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0b000.tpdm [ 0.223160][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0c000.tpdm [ 0.223210][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b09000.tpdm [ 0.223251][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0a000.tpdm [ 0.223557][ T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24b08000.tpda [ 0.223604][ T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24045000.funnel [ 0.224014][ T1] amba 24b05000.tmc: Fixing up cyclic dependency with 24b04000.funnel [ 0.224302][ T1] amba 24b06000.replicator: Fixing up cyclic dependency with soc:dummy_sink [ 0.224346][ T1] amba 24b06000.replicator: Fixing up cyclic dependency with 24b05000.tmc [ 0.224598][ T1] amba 24046000.replicator: Fixing up cyclic dependency with 24b06000.replicator [ 0.224851][ T1] amba 2404e000.replicator: Fixing up cyclic dependency with 24046000.replicator [ 0.225062][ T1] platform soc:dummy_replicator: Fixing up cyclic dependency with 2404e000.replicator [ 0.225273][ T1] platform soc:tmc_modem: Fixing up cyclic dependency with soc:dummy_replicator [ 0.225616][ T1] amba 24048000.tmc: Fixing up cyclic dependency with 2404e000.replicator [ 0.225922][ T1] amba 2404f000.tmc: Fixing up cyclic dependency with soc:dummy_replicator [ 0.238705][ T1] qcom_dma_iommu soc:dma_dev: assigned reserved memory node linux,cma [ 0.238906][ T1] DMA preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.241244][ T1] sdc1_emmc_sd_vdd: supplied by regulator-dummy [ 0.252486][ T1] gh-watchdog hypervisor:qcom,gh-watchdog: QCOM Apps Watchdog Initialized [ 0.252504][ T1] Minidump: Minidump driver hasn't probe, add region to pending list [ 0.259540][ T1] gcc_emac0_gdsc: supplied by pmx75_s5_level [ 0.259879][ T1] gcc_emac1_gdsc: supplied by pmx75_s5_level [ 0.260188][ T1] gcc_pcie_2_gdsc: supplied by pmx75_s5_level [ 0.260495][ T1] gcc_pcie_2_phy_gdsc: supplied by pmx75_l17_level [ 0.260803][ T1] gcc_pcie_gdsc: supplied by pmx75_l17_level [ 0.261096][ T1] gcc_pcie_phy_gdsc: supplied by pmx75_l17_level [ 0.261409][ T1] gcc_usb30_gdsc: supplied by pmx75_l17_level [ 0.261711][ T1] gcc_usb3_phy_gdsc: supplied by pmx75_s5_level [ 0.262980][ T1] Minidump: Enabled with max number of regions 200 [ 0.264796][ T1] qsmmuv500-tbu 1680000.anoc_1_qtb: Unable to get the transactiontracker-base [ 0.265029][ T1] qsmmuv500-tbu 1688000.ipa_qtb: Unable to get the transactiontracker-base [ 0.265250][ T1] qsmmuv500-tbu 16d0000.pcie_qtb: Unable to get the transactiontracker-base [ 0.265640][ T1] arm-smmu 15000000.apps-smmu: probing hardware configuration... [ 0.265647][ T1] arm-smmu 15000000.apps-smmu: SMMUv2 with: [ 0.265670][ T1] arm-smmu 15000000.apps-smmu: stage 1 translation [ 0.265676][ T1] arm-smmu 15000000.apps-smmu: coherent table walk [ 0.265683][ T1] arm-smmu 15000000.apps-smmu: stream matching with 57 register groups [ 0.265695][ T1] arm-smmu 15000000.apps-smmu: 24 context banks (0 stage-2 only) [ 0.265724][ T1] arm-smmu 15000000.apps-smmu: Supported page sizes: 0x61311000 [ 0.265731][ T1] arm-smmu 15000000.apps-smmu: Stage-1: 36-bit VA -> 42-bit IPA [ 0.267222][ T1] iommu: Default domain type: Translated [ 0.267230][ T1] iommu: DMA domain TLB invalidation policy: strict mode [ 0.267364][ T1] vgaarb: loaded [ 0.267632][ T1] SCSI subsystem initialized [ 0.267774][ T1] usbcore: registered new interface driver usbfs [ 0.267806][ T1] usbcore: registered new interface driver hub [ 0.267838][ T1] usbcore: registered new device driver usb [ 0.268337][ T1] pps_core: LinuxPPS API ver. 1 registered [ 0.268343][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.268356][ T1] PTP clock support registered [ 0.268981][ T1] IPA framework init [ 0.270607][ T1] Advanced Linux Sound Architecture Driver Initialized. [ 0.271144][ T1] pcie:pcie_init. [ 0.272208][ T1] clocksource: Switched to clocksource arch_sys_counter [ 0.308468][ T1] sdxpinn-debugcc soc:clock-controller@0: Registered debug measure clocks [ 0.315928][ T1] qcom_dload_probe: Current dump mode: 0x10 [ 0.316791][ T1] NET: Registered PF_INET protocol family [ 0.316888][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.317478][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.317501][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.317512][ T1] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.317594][ T1] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.317724][ T1] TCP: Hash tables configured (established 8192 bind 8192) [ 0.317816][ T1] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.317858][ T1] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.318020][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.318449][ T1] PCI: CLS 0 bytes, default 64 [ 0.318812][ T41] Trying to unpack rootfs image as initramfs... [ 0.329030][ T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.343087][ T1] Initialise system trusted keyrings [ 0.343350][ T1] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.348933][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.369362][ T1] Key type asymmetric registered [ 0.369385][ T1] Asymmetric key parser 'x509' registered [ 0.369484][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.369493][ T1] io scheduler mq-deadline registered [ 0.369499][ T1] io scheduler kyber registered [ 0.376279][ T1] gpi_dma 900000.qcom,gpi-dma: Adding to iommu group 0 [ 0.379944][ T1] geni_se_qup 9c0000.qcom,qupv3_0_geni_se: Adding to iommu group 1 [ 0.400805][ T1] v0.19, id=559, ver=1.0, raw_id=505, raw_ver=0, hw_plat=34, hw_plat_ver=65536 [ 0.400805][ T1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65610, pmic_die_revision=131073 foundry_id=1 serial_number=4071031649 num_pmics=2 chip_family=0x89 raw_device_family=0xa raw_device_number=0xb nproduct_id=0x443 num_clusters=0x1 ncluster_array_offset=0xd8 num_subset_parts=0xf nsubset_parts_array_offset=0xdc nmodem_supported=0xffffffff feature_code=0x0 pcode=0x0 sku=SA522M-0-(null) hw_plat_oem_variant=0 num_kvps=0 kvps_offset=296 num_func_clusters=0 boot_cluster=0 boot_core=0 [ 0.403494][ T1] ff0000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 141, base_baud = 0) is a EUD UART [ 0.404340][ T1] msm_mem_dump soc:mem_dump: assigned reserved memory node mem_dump_region [ 0.407205][ T1] MSM Memory Dump apps data table set up [ 0.408100][ T1] msm-dcc 240ff000.dcc_v2: ll-reg-offsets property doesn't exist [ 0.416908][ T1] mpm_hr_counter: can't find DT node [ 0.417080][ T1] KPI: Bootloader start count = 92660 [ 0.417090][ T1] KPI: Bootloader end count = 163395 [ 0.417097][ T1] KPI: Bootloader load kernel count = 55860 [ 0.417105][ T1] KPI: Kernel MPM timestamp = 180384 [ 0.417109][ T1] KPI: Kernel MPM Clock frequency = 32768 [ 0.417424][ T1] msm_hang_detect_probe: Missing cluster-id. [ 0.417432][ T1] msm_hang_detect_probe: Failed to get qcom,chd-percpu-info DT property [ 0.417437][ T1] msm_hang_detect: probe of soc:qcom,chd failed with error -22 [ 0.419894][ T1] msm_serial: driver initialized [ 0.422874][ T18] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.423575][ T1] brd: module loaded [ 0.428750][ T1] loop: module loaded [ 0.429092][ T1] zram: Added device: zram0 [ 0.429367][ T1] lkdtm: No crash points registered, enable through debugfs [ 0.430537][ T1] qcom_system_heap_create: DMA-BUF Heap: Created 'qcom,system' [ 0.430563][ T1] sysfs: cannot create duplicate filename '/devices/virtual/dma_heap/system' [ 0.430570][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.104-debug-g6812784dff8f-dirty #1 [ 0.430578][ T1] Hardware name: Qualcomm Technologies, Inc. SA522 IDP Overlay (DT) [ 0.430583][ T1] Call trace: [ 0.430587][ T1] dump_backtrace+0x0/0x214 [ 0.430601][ T1] show_stack+0x18/0x24 [ 0.430608][ T1] dump_stack_lvl+0x64/0x7c [ 0.430617][ T1] dump_stack+0x18/0x38 [ 0.430623][ T1] sysfs_create_dir_ns+0xe8/0x144 [ 0.430631][ T1] kobject_add_internal+0x168/0x3c4 [ 0.430640][ T1] kobject_add+0x94/0x100 [ 0.430646][ T1] device_add+0x17c/0x608 [ 0.430655][ T1] device_create_groups_vargs+0xcc/0x128 [ 0.430662][ T1] device_create+0x58/0x80 [ 0.430669][ T1] dma_heap_add+0x11c/0x2ac [ 0.430676][ T1] qcom_system_heap_create+0x24c/0x2a0 [ 0.430683][ T1] qcom_dma_heap_probe+0x3c/0x1cc [ 0.430689][ T1] platform_probe+0xa8/0xd0 [ 0.430696][ T1] call_driver_probe+0x38/0x110 [ 0.430703][ T1] really_probe+0xc4/0x34c [ 0.430708][ T1] __driver_probe_device+0x114/0x17c [ 0.430714][ T1] driver_probe_device+0x48/0x1a0 [ 0.430721][ T1] __driver_attach+0x100/0x23c [ 0.430726][ T1] bus_for_each_dev+0x80/0xcc [ 0.430732][ T1] driver_attach+0x24/0x30 [ 0.430738][ T1] bus_add_driver+0x110/0x220 [ 0.430744][ T1] driver_register+0x78/0x110 [ 0.430750][ T1] __platform_driver_register+0x24/0x30 [ 0.430757][ T1] init_heap_driver+0x1c/0x28 [ 0.430765][ T1] do_one_initcall+0xb4/0x2e4 [ 0.430771][ T1] do_initcall_level+0xa4/0x14c [ 0.430778][ T1] do_initcalls+0x54/0x94 [ 0.430784][ T1] do_basic_setup+0x1c/0x28 [ 0.430790][ T1] kernel_init_freeable+0xe0/0x158 [ 0.430796][ T1] kernel_init+0x20/0x1a0 [ 0.430803][ T1] ret_from_fork+0x10/0x20 [ 0.430810][ T1] kobject_add_internal failed for system with -EEXIST, don't try to register things with the same name in the same directory. [ 0.430818][ T1] dma_heap: Unable to create device [ 0.430827][ T1] qcom_system_heap_create: Failed to create 'system', error is -17 [ 0.431026][ T1] qcom_system_heap_create: DMA-BUF Heap: Created 'qcom,system-uncached' [ 0.431134][ T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-pixel' [ 0.431235][ T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-non-pixel' [ 0.431584][ T1] platform soc:qcom,dma-heaps:qcom,qseecom: assigned reserved memory node qseecom_region [ 0.431821][ T1] platform soc:qcom,dma-heaps:qcom,qseecom_ta: assigned reserved memory node qseecom_ta_region [ 0.432072][ T1] platform soc:qcom,dma-heaps:qcom,audio: assigned reserved memory node audio_heap_region@88b00000 [ 0.432240][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom [ 0.432350][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom-ta [ 0.433169][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,audio [ 0.433926][ T1] msm_qpic_nand 1c98000.nand: Adding to iommu group 2 [ 0.435296][ T1] sps_phy2h: sps: BAM device 0x0000000001c9c000 is not registered yet [ 0.435525][ T1] sps_register_bam_device: sps:BAM 0x0000000001c9c000 is registered [ 0.435537][ T1] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xffffff80041cb400 [ 0.435691][ T1] sps_bam_enable: sps:BAM 0x0000000001c9c000 (va:0x00000000614a9ff0) enabled: ver:0x19, number of pipes:9 [ 0.435978][ T1] msm_nand_version_check: nand_major:2, nand_minor:1, qpic_major:2, qpic_minor:1 [ 0.436073][ T1] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM [ 0.436181][ T1] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 51 [ 0.436248][ T1] msm_nand_version_check: nand_major:2, nand_minor:1, qpic_major:2, qpic_minor:1 [ 0.436377][ T1] msm_nand_flash_onfi_probe: Found an ONFI compliant device MT29F8G08ADBFA , [ 0.436384][ T1] msm_nand_scan: NAND Id: 0x26d0a32c Buswidth: 8Bits Density: 1024 MByte [ 0.436390][ T1] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 256 (in Bytes) [ 0.436395][ T1] msm_nand_scan: BCH ECC: 8 Bit [ 0.436400][ T1] msm_nand_scan: CFG0: 0x290409c0, CFG1: 0x08045d5c [ 0.436400][ T1] RAWCFG0: 0x2b8401c0, RAWCFG1: 0x0005055d [ 0.436400][ T1] ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040d10 [ 0.436400][ T1] RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175 [ 0.441307][ T41] Freeing initrd memory: 6144K [ 0.441645][ T73] kworker/u8:0 (73) used greatest stack depth: 13456 bytes left [ 0.441978][ T1] Creating 51 MTD partitions on "1c98000.nand": [ 0.441989][ T1] 0x000000000000-0x000000280000 : "sbl" [ 0.443440][ T1] 0x000000280000-0x000000500000 : "sbl_b" [ 0.444818][ T1] 0x000000500000-0x000000680000 : "mibib" [ 0.446150][ T1] 0x000000680000-0x000000b80000 : "efs_backup" [ 0.447471][ T1] 0x000000b80000-0x000002200000 : "efs2" [ 0.448875][ T1] 0x000002200000-0x0000022c0000 : "ddr" [ 0.450242][ T1] 0x0000022c0000-0x000002380000 : "sec" [ 0.451589][ T1] 0x000002380000-0x000002440000 : "emac" [ 0.453042][ T1] 0x000002440000-0x000002500000 : "devinfo" [ 0.454374][ T1] 0x000002500000-0x0000025c0000 : "recoveryinfo" [ 0.455692][ T1] 0x0000025c0000-0x000002680000 : "misc" [ 0.457071][ T1] 0x000002680000-0x000002800000 : "keystore" [ 0.458406][ T1] 0x000002800000-0x000002b80000 : "tz" [ 0.459749][ T1] 0x000002b80000-0x000002c40000 : "tz_devcfg" [ 0.461111][ T1] 0x000002c40000-0x000002d00000 : "apdp" [ 0.462495][ T1] 0x000002d00000-0x000002e00000 : "keymaster" [ 0.463823][ T1] 0x000002e00000-0x000002f80000 : "cmnlib64" [ 0.465201][ T1] 0x000002f80000-0x000003040000 : "xbl_config" [ 0.466533][ T1] 0x000003040000-0x0000031c0000 : "xbl_ramdump" [ 0.467885][ T1] 0x0000031c0000-0x000003280000 : "multi_oem" [ 0.469306][ T1] 0x000003280000-0x000003340000 : "multi_qti" [ 0.470644][ T1] 0x000003340000-0x000003400000 : "aop" [ 0.472046][ T1] 0x000003400000-0x0000034c0000 : "aop_devcfg" [ 0.473434][ T1] 0x0000034c0000-0x0000036c0000 : "qhee" [ 0.474784][ T1] 0x0000036c0000-0x0000037c0000 : "abl" [ 0.476087][ T1] 0x0000037c0000-0x000003b40000 : "uefi" [ 0.477463][ T1] 0x000003b40000-0x000003c00000 : "qupfw" [ 0.478810][ T1] 0x000003c00000-0x000003cc0000 : "shrm" [ 0.480122][ T1] 0x000003cc0000-0x000003d80000 : "cpucpfw" [ 0.481629][ T1] 0x000003d80000-0x000003e40000 : "dtbo" [ 0.482965][ T1] 0x000003e40000-0x000006040000 : "boot" [ 0.484394][ T1] 0x000006040000-0x0000063c0000 : "tz_b" [ 0.485776][ T1] 0x0000063c0000-0x000006480000 : "tz_devcfg_b" [ 0.487103][ T1] 0x000006480000-0x000006540000 : "apdp_b" [ 0.488474][ T1] 0x000006540000-0x000006640000 : "keymaster_b" [ 0.489823][ T1] 0x000006640000-0x0000067c0000 : "cmnlib64_b" [ 0.491193][ T1] 0x0000067c0000-0x000006880000 : "xbl_config_b" [ 0.492588][ T1] 0x000006880000-0x000006a00000 : "xbl_ramdump_b" [ 0.493951][ T1] 0x000006a00000-0x000006ac0000 : "multi_oem_b" [ 0.495288][ T1] 0x000006ac0000-0x000006b80000 : "multi_qti_b" [ 0.496707][ T1] 0x000006b80000-0x000006c40000 : "aop_b" [ 0.498060][ T1] 0x000006c40000-0x000006d00000 : "aop_devcfg_b" [ 0.499425][ T1] 0x000006d00000-0x000006f00000 : "qhee_b" [ 0.500839][ T1] 0x000006f00000-0x000007000000 : "abl_b" [ 0.502178][ T1] 0x000007000000-0x000007380000 : "uefi_b" [ 0.503533][ T1] 0x000007380000-0x000007440000 : "qupfw_b" [ 0.504969][ T1] 0x000007440000-0x000007500000 : "shrm_b" [ 0.506319][ T1] 0x000007500000-0x0000075c0000 : "cpucpfw_b" [ 0.507669][ T1] 0x0000075c0000-0x000007680000 : "dtbo_b" [ 0.509087][ T1] 0x000007680000-0x000009880000 : "boot_b" [ 0.510436][ T1] 0x000009880000-0x000040000000 : "system" [ 0.511779][ T1] msm_nand_probe: NANDc phys addr 0x1c98000, BAM phys addr 0x1c9c000, BAM IRQ 23 [ 0.511797][ T1] msm_nand_probe: Allocated DMA buffer at virt_addr 0x00000000bb340f09, phys_addr 0xffffe000 [ 0.511805][ T1] msm_nand_probe: Host capabilities:0x00000001 [ 0.512226][ T1] SPI driver spidev has no spi_device_id for qcom,spi-msm-codec-slave [ 0.512238][ T1] SPI driver spidev has no spi_device_id for qcom,si5518-clk [ 0.513081][ T1] MACsec IEEE 802.1AE [ 0.514317][ T1] tun: Universal TUN/TAP device driver, 1.6 [ 0.514548][ T1] slcan: serial line CAN interface driver [ 0.514555][ T1] slcan: 10 dynamic interface channels. [ 0.514562][ T1] CAN device driver interface [ 0.514573][ T1] SPI driver qti-can has no spi_device_id for qcom,renesas,rh850 [ 0.514577][ T1] SPI driver qti-can has no spi_device_id for qcom,nxp,mpc5746c [ 0.517883][ T1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 0.644942][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.644983][ T1] ehci-pci: EHCI PCI platform driver [ 0.645055][ T1] ehci-platform: EHCI generic platform driver [ 0.646282][ T1] usbcore: registered new interface driver usb-storage [ 0.646319][ T1] usbcore: registered new interface driver usb_ehset_test [ 0.646343][ T1] usbcore: registered new interface driver lvs [ 0.648600][ T1] i2c_dev: i2c /dev entries driver [ 0.660777][ T1] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 0.660794][ T1] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 0.661040][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.661308][ T1] cpuidle: using governor qcom-cpu-lpm [ 0.664358][ T1] sdhci: Secure Digital Host Controller Interface driver [ 0.664372][ T1] sdhci: Copyright(c) Pierre Ossman [ 0.664376][ T1] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.665444][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.665845][ T1] usbcore: registered new interface driver usbhid [ 0.665852][ T1] usbhid: USB HID core driver [ 0.667233][ T1] [1]: __qmp_rx_worker: RX int without negotiation ack [ 0.691817][ T1] qcom_q6v5_pas 4080000.remoteproc-mss: assigned reserved memory node linux,cma [ 0.693231][ T1] remoteproc remoteproc0: 4080000.remoteproc-mss is available [ 0.696651][ T1] cs_system_cfg: CoreSight Configuration manager initialised [ 0.698414][ T1] coresight-tmc 24048000.tmc: Adding to iommu group 3 [ 0.699566][ T1] coresight-tmc 2404f000.tmc: Adding to iommu group 4 [ 0.723076][ T1] CSCFG registered coresight-etm0 [ 0.723088][ T1] coresight coresight-etm0: CPU0: coresight-etm v4.2 initialized [ 0.724363][ T1] CSCFG registered coresight-etm1 [ 0.724374][ T1] coresight coresight-etm1: CPU1: coresight-etm v4.2 initialized [ 0.725629][ T1] CSCFG registered coresight-etm2 [ 0.725640][ T1] coresight coresight-etm2: CPU2: coresight-etm v4.2 initialized [ 0.726895][ T1] CSCFG registered coresight-etm3 [ 0.726906][ T1] coresight coresight-etm3: CPU3: coresight-etm v4.2 initialized [ 0.728093][ T1] coresight-stm 24002000.stm: coresight-stm : stm_register_device failed, probing deferred [ 0.728959][ T1] coresight coresight-cti-qc_cti: CTI initialized [ 0.729613][ T1] coresight coresight-cti-apss_dl_cti: CTI initialized [ 0.730250][ T1] coresight coresight-cti-apss_cti0: CTI initialized [ 0.730880][ T1] coresight coresight-cti-apss_cti1: CTI initialized [ 0.731501][ T1] coresight coresight-cti-apss_cti2: CTI initialized [ 0.732123][ T1] coresight coresight-cti-cti0: CTI initialized [ 0.732784][ T1] coresight coresight-cti-ddr_ch01_dl_cti_0: CTI initialized [ 0.733397][ T1] coresight coresight-cti-ddr_dl_0_cti_0: CTI initialized [ 0.734004][ T1] coresight coresight-cti-ddr_dl_1_cti_0: CTI initialized [ 0.734609][ T1] coresight coresight-cti-swao_cti: CTI initialized [ 0.735216][ T1] coresight coresight-cti-mss_cti: CTI initialized [ 0.735822][ T1] coresight coresight-cti-mss_q6_cti: CTI initialized [ 0.736427][ T1] coresight coresight-cti-mss_vq6_cti: CTI initialized [ 0.770231][ T1] coresight-csr 24001000.csr: CSR initialized: coresight-csr [ 0.770425][ T1] coresight-csr 24b11000.csr: CSR initialized: coresight-swao-csr [ 0.771448][ T1] coresight-dummy soc:snoc: Dummy device initialized [ 0.772069][ T1] coresight-dummy soc:modem_diag: Dummy device initialized [ 0.772372][ T1] coresight-dummy soc:dummy_sink: Dummy device initialized [ 0.773159][ T1] coresight-dummy soc:dummy_replicator: Dummy device initialized [ 0.774432][ T1] coresight-remote-etm soc:modem_etm0: Remote ETM initialized [ 0.775069][ T1] coresight-remote-etm soc:modem2_etm0: Remote ETM initialized [ 0.783546][ T1] u32 classifier [ 0.783563][ T1] input device check on [ 0.783567][ T1] Actions configured [ 0.784167][ T1] IPv4 over IPsec tunneling driver [ 0.784623][ T1] Initializing XFRM netlink socket [ 0.784651][ T1] IPsec XFRM device driver [ 0.784974][ T1] NET: Registered PF_INET6 protocol family [ 0.785864][ T1] Segment Routing with IPv6 [ 0.785887][ T1] In-situ OAM (IOAM) with IPv6 [ 0.785956][ T1] mip6: Mobile IPv6 [ 0.786371][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.787015][ T1] NET: Registered PF_PACKET protocol family [ 0.787040][ T1] NET: Registered PF_KEY protocol family [ 0.787069][ T1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.787097][ T1] can: controller area network core [ 0.787200][ T1] NET: Registered PF_CAN protocol family [ 0.787209][ T1] can: raw protocol [ 0.787217][ T1] can: broadcast manager protocol [ 0.787228][ T1] can: netlink gateway - max_hops=1 [ 0.787315][ T1] l2tp_core: L2TP core driver, V2.0 [ 0.787322][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 0.787338][ T1] tipc: Activated (version 2.0.0) [ 0.787446][ T1] NET: Registered PF_TIPC protocol family [ 0.787514][ T1] tipc: Started in single node mode [ 0.787736][ T1] NET: Registered PF_VSOCK protocol family [ 0.789881][ T1] registered taskstats version 1 [ 0.789906][ T1] Loading compiled-in X.509 certificates [ 0.792136][ T1] Loaded X.509 cert 'Build time autogenerated kernel key: d548f2f4b1fe74299f7e8ae08567837fc60be0f5' [ 0.793262][ T1] Loaded X.509 cert 'IMA-CA: IMA/EVM certificate signing key: 62abee15e385145ad6690c2ed8cb3038f1b96625' [ 0.793977][ T1] Key type .fscrypt registered [ 0.793991][ T1] Key type fscrypt-provisioning registered [ 0.816073][ T41] cpu cpu0: EM: created perf domain [ 0.816768][ T41] gpio-481 (hsm-rst-hog): hogged as output/high [ 0.818751][ T9] spmi spmi-0: PMIC arbiter version v7 (0x70000001) [ 0.839997][ T41] gpio-regulator soc:sdc1-sd-ls-gpio-regulator: nonexclusive access to GPIO for enable [ 0.851627][ T41] pci-msm 1bf0000.qcom,pcie: PCIe: msm_pcie_probe [ 0.852156][ T41] msm_pcie_get_reg: PCIe: RC0: no tcsr resource found. [ 0.852175][ T41] msm_pcie_get_reg: PCIe: RC0: no rumi resource found. [ 0.854199][ T41] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. [ 0.858179][ T41] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 0.860785][ T41] pcie_phy_init: PCIe RC0 PHY is ready! [ 0.870838][ T41] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. [ 0.979545][ T41] msm_pcie_link_train: PCIe: Assert the reset of endpoint of RC0. [ 0.979558][ T41] msm_pcie_link_train: PCIe RC0 link initialization failed [ 0.980052][ T41] msm_pcie_enumerate: PCIe: RC0: failed to enable [ 0.980063][ T41] msm_pcie_probe: PCIe: RC0 is not enabled during bootup; it will be enumerated upon client request. [ 0.980809][ T41] pci-msm 1c10000.qcom,pcie: PCIe: msm_pcie_probe [ 0.981346][ T41] msm_pcie_get_reg: PCIe: RC2: no tcsr resource found. [ 0.981359][ T41] msm_pcie_get_reg: PCIe: RC2: no rumi resource found. [ 0.983106][ T41] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. [ 0.986940][ T41] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 0.989305][ T41] pcie_phy_init: PCIe RC2 PHY is ready! [ 0.999358][ T41] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ 1.108044][ T41] msm_pcie_link_train: PCIe: Assert the reset of endpoint of RC2. [ 1.108058][ T41] msm_pcie_link_train: PCIe RC2 link initialization failed [ 1.108598][ T41] msm_pcie_enumerate: PCIe: RC2: failed to enable [ 1.108610][ T41] msm_pcie_probe: PCIe: RC2 is not enabled during bootup; it will be enumerated upon client request. [ 1.110511][ T41] qcom-ethqos 23040000.qcom,emac0: Adding to iommu group 5 [ 1.111287][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ eth_wake_irq not found [ 1.111303][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ eth_lpi not found [ 1.113323][ T41] qcom-ethqos 23040000.qcom,emac0: snps,phy-addr property is deprecated [ 1.115585][ T41] qcom-ethqos qcom_ethqos_probe:7040 emac-phy-off-suspend = 4 [ 1.115610][ T41] qcom-ethqos qcom_ethqos_probe:7061 has_xgmac = 1 GMAC4_version_id = 0x31 [ 1.115620][ T41] qcom-ethqos qcom_ethqos_probe:7071 emac_core_version = 1073741824 [ 1.115735][ T41] qcom-scm: __qcom_scm_get_emac_maxspeed: scm get max_spd ret=0x0 res0 = 0 res1 =0 res2 = 0 [ 1.115743][ T41] qcom-ethqos qcom_ethqos_probe:7077 7077 qcom_ethqos_probe max speed = 0 [ 1.115974][ T41] qcom-ethqos 23040000.qcom,emac0: User ID: 0x76, Synopsys ID: 0x31 [ 1.115990][ T41] qcom-ethqos 23040000.qcom,emac0: XGMAC2 [ 1.116003][ T41] qcom-ethqos 23040000.qcom,emac0: DMA HW capability register supported [ 1.116009][ T41] qcom-ethqos 23040000.qcom,emac0: RX Checksum Offload Engine supported [ 1.116015][ T41] qcom-ethqos 23040000.qcom,emac0: COE Type 1 [ 1.116021][ T41] qcom-ethqos 23040000.qcom,emac0: TX Checksum insertion supported [ 1.116026][ T41] qcom-ethqos 23040000.qcom,emac0: TSO supported [ 1.116032][ T41] qcom-ethqos 23040000.qcom,emac0: Enable RX Mitigation via HW Watchdog Timer [ 1.116043][ T41] qcom-ethqos 23040000.qcom,emac0: device MAC address f2:e0:c0:a2:62:88 [ 1.116051][ T41] qcom-ethqos 23040000.qcom,emac0: Enabled L3L4 Flow TC (entries=8) [ 1.116058][ T41] qcom-ethqos 23040000.qcom,emac0: Enabled RFS Flow TC (entries=8) [ 1.116066][ T41] qcom-ethqos 23040000.qcom,emac0: Enabling HW TC (entries=128, max_off=64) [ 1.116073][ T41] qcom-ethqos 23040000.qcom,emac0: TSO feature enabled [ 1.116079][ T41] qcom-ethqos 23040000.qcom,emac0: Using 40 bits DMA width [ 1.457720][ T41] qcom-scm: __qcom_scm_iomacro_dump: scm io macro dump 0x230bf000 buf = 0x80c01000 len = 0x200 [ 1.457900][ T41] qcom-ethqos 23040000.qcom,emac0: ext_snapshot_num = 0 [ 1.458264][ T41] qcom-scm: __qcom_scm_ethqos_configure: scm ethqos configure 0x230bf000 0xa 0x4 0x80c00000, 0x200 done =0x0 [ 1.458290][ T41] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1370 qcom_ethqos_serdes_update_sgmii : Serdes Speed set to 1GB speed [ 1.463445][ T41] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1385 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000 [ 1.463577][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ pcs_intr not found [ 1.463587][ T41] qcom-ethqos ethqos_xpcs_intr_config:49 XPCS IRQ configuration information not found [ 1.463595][ T41] qcom-ethqos ethqos_xpcs_init:99 No DTSI entry found for XPCS interrupt, using non-interrupt mode [ 1.463613][ T41] qcom-ethqos ethqos_xpcs_init:111 Successfully initialized XPCS [ 1.464044][ T41] qcom-ethqos ethqos_create_emac_rec_device_node:5848 mac recovery node opened [ 1.465667][ T41] PMIC PON log: Fundamental Reset: PON_PBL_STATUS=XVDD, DVDD [ 1.465703][ T41] PMIC PON log: FAULT_REASON2=RESTART_PON [ 1.465799][ T41] PMIC PON log: PON Trigger: KPDPWR_N [ 1.465914][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.465936][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.465958][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.466017][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.466129][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.466152][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.466173][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.466232][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.467033][ T41] qcom-bwmon: Zone thres larger than hw limit: hi:97 med:400 lo:0 [ 1.467997][ T41] 984000.qcom,qup_uart: ttyMSM0 at MMIO 0x984000 (irq = 131, base_baud = 0) is a MSM [ 6.049940][ T41] printk: console [ttyMSM0] enabled [ 6.056659][ T41] msm_geni_serial 98c000.qcom,qup_uart: Wakeup byte 0xfd [ 6.064979][ T41] msm_geni_serial 98c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0 [ 6.075573][ T41] msm_geni_serial 98c000.qcom,qup_uart: gsi_mode:0 [ 6.082142][ T41] 98c000.qcom,qup_uart: ttyHS0 at MMIO 0x98c000 (irq = 132, base_baud = 0) is a MSM [ 6.092606][ T41] msm_geni_serial 990000.qcom,qup_uart: IRQ index 1 not found [ 6.100131][ T41] msm_geni_serial 990000.qcom,qup_uart: No wakeup IRQ configured [ 6.107917][ T41] msm_geni_serial 990000.qcom,qup_uart: No Shutdown config specified [ 6.117071][ T41] msm_geni_serial 990000.qcom,qup_uart: Serial port1 added.FifoSize 64 is_console0 [ 6.127659][ T41] msm_geni_serial 990000.qcom,qup_uart: gsi_mode:0 [ 6.134225][ T41] 990000.qcom,qup_uart: ttyHS1 at MMIO 0x990000 (irq = 135, base_baud = 0) is a MSM [ 6.144765][ T41] msm_geni_serial 9a0000.qcom,qup_uart: IRQ index 1 not found [ 6.152293][ T41] msm_geni_serial 9a0000.qcom,qup_uart: No wakeup IRQ configured [ 6.160082][ T41] msm_geni_serial 9a0000.qcom,qup_uart: No Shutdown config specified [ 6.169227][ T41] msm_geni_serial 9a0000.qcom,qup_uart: Serial port2 added.FifoSize 64 is_console0 [ 6.179769][ T41] msm_geni_serial 9a0000.qcom,qup_uart: gsi_mode:0 [ 6.186317][ T41] 9a0000.qcom,qup_uart: ttyHS2 at MMIO 0x9a0000 (irq = 139, base_baud = 0) is a MSM [ 6.198920][ T41] spi_geni 980000.spi: spi_geni_probe: completed 0 [ 6.205890][ T153] spi_geni 980000.spi: tx_fifo 16 rx_fifo 32 tx_width 32 [ 6.208130][ T41] spi_geni 998000.spi: spi_geni_probe: completed 0 [ 6.222178][ T41] spi_geni 99c000.spi: spi_geni_probe: completed 0 [ 6.231864][ T41] spmi spmi-1: SPMI PMIC arbiter debug bus controller added [ 6.240875][ T41] i2c_geni 988000.i2c: Bus frequency is set to 400000Hz. [ 6.248132][ T41] i2c_geni 988000.i2c: Multi-EE usecase [ 6.254680][ T41] at24 6-0052: supply vcc not found, using dummy regulator [ 6.292482][ T41] i2c_geni 988000.i2c: I2C probed [ 6.298471][ T41] i2c_geni 994000.i2c: Bus frequency is set to 400000Hz. [ 6.307817][ T41] [ 6.307817][ T41] [I]6SMI230<222>SMI230GYRO i2c adapter is at 0x00000000bb08d7ff [ 6.320235][ T41] [ 6.320235][ T41] [E]3SMI230<238>Bosch Sensor Device SMI230GYRO initialization failed, error -3 [ 6.333742][ T41] SMI230GYRO: probe of 5-0069 failed with error -5 [ 6.341425][ T41] [ 6.341425][ T41] [I]6SMI230<152>SMI230ACC i2c adapter is at 0x00000000bb08d7ff [ 6.354651][ T41] [ 6.354651][ T41] [E]3SMI230<95>I2C xfer error [ 6.363254][ T41] [ 6.363254][ T41] [E]3SMI230<168>Bosch Sensor Device SMI230ACC initialization failed, error -2 [ 6.376712][ T41] SMI230ACC: probe of 5-0019 failed with error -5 [ 6.383232][ T41] i2c i2c-5: Failed to register i2c client iam20680 at 0x69 (-16) [ 6.391120][ T41] i2c i2c-5: of_i2c: Failure registering /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/iam20680@69 [ 6.401774][ T41] i2c i2c-5: Failed to create I2C device for /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/iam20680@69 [ 6.413789][ T41] st_asm330lhh_i2c 5-006b: Ver: v2.0.1-4 [ 6.419455][ T41] st_asm330lhh_i2c 5-006b: Ver: v2.0.1-4 [ 6.425322][ T41] st_asm330lhh_i2c 5-006b: failed to read whoami register [ 6.432492][ T41] st_asm330lhh_i2c: probe of 5-006b failed with error -22 [ 6.439712][ T41] i2c i2c-5: Failed to register i2c client asm330lhhx at 0x6b (-16) [ 6.447771][ T41] i2c i2c-5: of_i2c: Failure registering /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/asm330lhhx@6b [ 6.458601][ T41] i2c i2c-5: Failed to create I2C device for /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/asm330lhhx@6b [ 6.469850][ T41] i2c_geni 994000.i2c: I2C probed [ 6.475574][ T41] irq: IRQ164: trimming hierarchy from :soc:interrupt-controller@b220000-9 [ 6.484440][ T41] pps pps0: new PPS source soc:pps.-1 [ 6.489869][ T41] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 164 [ 6.498305][ T41] pps pps0: Registered IRQ 164 as PPS source [ 6.506124][ T57] sdhci_msm 8804000.sdhci: Adding to iommu group 6 [ 6.507248][ T41] coresight-tmc 24048000.tmc: setting tmc etr sw usb buf size 0x400000 [ 6.513594][ T57] sdhci_msm 8804000.sdhci: nvmem cell get failed [ 6.521301][ T41] coresight-tmc 24048000.tmc: setting tmc etr sw pcie buf size 0x2000000 [ 6.536807][ T57] sdhci_msm 8804000.sdhci: core_reset unavailable,err = -2 [ 6.537574][ T41] tmc_etr_usb_init: ETR usb property is not configured! [ 6.544077][ T57] sdhci_msm 8804000.sdhci: error -EOPNOTSUPP: unable to acquire core_reset [ 6.560426][ T57] sdhci_msm 8804000.sdhci: TCXO clk not present (-2) [ 6.561785][ T41] coresight coresight-stm: STM32 initialized [ 6.567158][ T57] sdhci_msm 8804000.sdhci: Failed to get bus_scale data [ 6.580237][ T57] mmc0: CQHCI version 5.10 [ 6.580964][ T41] sdc2_sd_vdd: supplied by sdc2_sd_ls_vccb [ 6.598129][ T41] input: pmic_pwrkey as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:pwrkey/input/input0 [ 6.616505][ T67] sdhci_msm 8804000.sdhci: sdhci_msm_hw_reset: failed, err = -95 [ 6.617152][ T57] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit [ 6.618167][ T41] input: pmic_resin as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:resin/input/input1 [ 6.619401][ T41] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: registered as rtc0 [ 6.619456][ T41] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: setting system clock to 1970-01-01T00:15:39 UTC (939) [ 6.635340][ T41] extcon-pm8941-misc c42d000.qcom,spmi:qcom,pmx75@1:qcom,pmd-vbus-det@1500: IRQ usb_id not found [ 6.652340][ T57] sdhci_msm 8804000.sdhci: mmc0: CQE init: success [ 6.662091][ T41] nvmem-cells property is not defined in ssusb node [ 6.684233][ T153] qti-can spi0.0: QTI CAN probe failed [ 6.690485][ T41] msm-dwc3 a600000.ssusb: IRQ hs_phy_irq not found [ 6.701610][ T67] mmc0: Command Queue Engine enabled [ 6.703278][ T41] msm-dwc3 a600000.ssusb: Nominal values not found. [ 6.708622][ T67] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.713902][ T41] msm-dwc3 a600000.ssusb: Using default bus votes [ 6.721002][ T67] mmcblk0: mmc0:0001 8GUF4R 7.28 GiB [ 6.728638][ T41] msm-dwc3 a600000.ssusb: Could not get usb psy [ 6.735453][ T67] mmcblk0: p1 [ 6.749709][ T67] mmcblk0boot0: mmc0:0001 8GUF4R 31.9 MiB [ 6.751063][ T57] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode [ 6.755928][ T41] tlv320aic32x4 6-0018: 222 [ 6.756532][ T67] mmcblk0boot1: mmc0:0001 8GUF4R 31.9 MiB [ 6.757428][ T67] mmcblk0rpmb: mmc0:0001 8GUF4R 4.00 MiB, chardev (506:0) [ 6.763341][ T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK [ 6.767191][ T41] tlv320aic32x4 6-0018: aic32x4_parse_dt 1 [ 6.767196][ T41] tlv320aic32x4 6-0018: aic32x4_parse_dt 2 [ 6.775959][ T57] dwc3 a600000.dwc3: Adding to iommu group 7 [ 6.780182][ T41] tlv320aic32x4 6-0018: rstn_gpio (357) [ 6.791674][ T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK [ 6.797018][ T41] tlv320aic32x4 6-0018: aic32x4_setup_regulators [ 6.824745][ T57] msm-dwc3 a600000.ssusb: dwc3 msm iommu fault handler registered [ 6.827416][ T41] tlv320aic32x4 6-0018: aic32x4_register_clocks (-1452873372) [ 6.862288][ T41] tlv320aic32x4 6-0018: aic32x4_register_clocks (-1452873372) done [ 6.870287][ T41] tlv320aic32x4 6-0018: devm_snd_soc_register_component (0) done [ 6.879298][ T41] sdhci_msm 8844000.sdhci: Adding to iommu group 8 [ 6.879624][ T1] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.888411][ T41] sdhci_msm 8844000.sdhci: Got CD GPIO [ 6.895039][ T1] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.900430][ T41] sdhci_msm 8844000.sdhci: core_reset unavailable,err = -2 [ 6.907584][ T67] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.914708][ T41] sdhci_msm 8844000.sdhci: error -EOPNOTSUPP: unable to acquire core_reset [ 6.933069][ T67] cfg80211: failed to load regulatory.db [ 6.939148][ T1] ALSA device list: [ 6.939753][ T41] sdhci_msm 8844000.sdhci: TCXO clk not present (-2) [ 6.942948][ T1] No soundcards found. [ 6.949673][ T41] sdhci_msm 8844000.sdhci: Failed to get bus_scale data [ 6.993837][ T41] mmc1: SDHCI controller on 8844000.sdhci [8844000.sdhci] using ADMA 64-bit [ 7.002982][ T1] Freeing unused kernel memory: 768K [ 7.009584][ T1] Run /init as init process [ 7.022311][ T190] busybox (190) used greatest stack depth: 12928 bytes left Init: EarlySetup Init: SetArgs [ 7.071344][ T206] busybox (206) used greatest stack depth: 12704 bytes left [ 7.083034][ T207] busybox (207) used greatest stack depth: 11792 bytes left [ 7.091780][ T209] ubi0: attaching mtd50 [ 8.181999][ T209] ubi0: scanning is finished [ 8.194148][ T209] ubi0: attached mtd50 (name "system", size 871 MiB) [ 8.200900][ T209] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 8.208690][ T209] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 8.216394][ T209] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 8.224277][ T209] ubi0: good PEBs: 3486, bad PEBs: 0, corrupted PEBs: 0 [ 8.231261][ T209] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128 [ 8.239406][ T209] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1295712816 [ 8.249504][ T209] ubi0: available PEBs: 0, total reserved PEBs: 3486, PEBs reserved for bad PEB handling: 80 [ 8.259799][ T210] ubi0: background thread "ubi_bgt0d" started, PID 210 UBI device number 0, total 3486 LEBs (885276672 bytes, 844.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 8.294101][ T224] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 8.383454][ T224] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_a", R/O mode [ 8.392859][ T224] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 8.403749][ T224] UBIFS (ubi0:0): FS size: 144498688 bytes (137 MiB, 569 LEBs), max 2146 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 8.416693][ T224] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 8.423407][ T224] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 4FC9AB5D-0785-4F16-8AA2-292044690D35, small LPT model Init: MountSystem [ 8.447091][ T226] busybox.suid (226) used greatest stack depth: 11568 bytes left Init: MoveMountToSystem [ 8.868701][ T230] modprobe (230) used greatest stack depth: 10512 bytes left systemd 244.5+ running in system mode. (-PAM +AUDIT +SELINUX +IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS -KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) Detected virtualization vm-other. Detected architecture arm64. Welcome to QTI Linux Telematics distro with debug capabilities. android-1.0-25-g42ad0b88! Set hostname to . Initializing machine ID from random generator. Installed transient /etc/machine-id file. [ 9.098517][ T232] systemd-run-gen (232) used greatest stack depth: 10368 bytes left Configuration file /lib/systemd/system/systemrw.mount.d/systemrw.conf is marked executable. Please remove executable permission bits. Proceeding anyway. /lib/systemd/system/earlyinit-logd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/logd.pid → /run/logd.pid; please update the unit file accordingly. Configuration file /lib/systemd/system/dbus.service.d/dbus.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway. multi-user.target: Wants dependency dropin /lib/systemd/system/multi-user.target.wants/tz_log.service target /lib/systemd/system/qrng.service has different name Configuration file /lib/systemd/system/overlay_selinuxrw-workdir.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. /lib/systemd/system/ipacmdiag.service:4: Failed to add dependency on diag-router, ignoring: Invalid argument /lib/systemd/system/ipacmdiag.service:5: Failed to add dependency on diag-router, ignoring: Invalid argument /lib/systemd/system/emac_ioss.service:1: Assignment outside of section. Ignoring. /lib/systemd/system/emac_ioss.service:2: Assignment outside of section. Ignoring. /etc/systemd/system/agm_server.service:14: Unknown key name 'SystemdService' in section 'Service', ignoring. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Slices. [ OK ] Reached target Swap. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Mounting /systemrw... Mounting /data... Mounting POSIX Message Queue File System... Mounting /persist... var-volatile.mount: Directory /var/volatile to mount over is not empty, mounting anyway. Mounting /var/volatile... Starting Load dataipa dlkm... [ 9.965296][ T233] UBIFS (ubi0:3): Mounting in unauthenticated mode Starting Mount firmware pa…on to /firmware mount point... Starting Load datarmnet dlkm service... [ 9.968242][ T241] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 241 [ 9.987723][ T236] UBIFS (ubi0:4): Mounting in unauthenticated mode [ 10.000228][ T243] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 243 [ OK ] Started qrtr-filter Service. [ 10.036521][ T244] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 244 Starting Load/Save Random Seed... [ 10.050077][ T242] qrtr_bpf_filter_attach bpf filter with fd 15 attached with qrtr Starting Apply Kernel Variables... [ 10.122352][ T233] UBIFS (ubi0:3): recovery needed [ OK ] Started zram setup service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /var/volatile. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ 10.227962][ T240] rmnet:start/load [ 10.228120][ T234] UBIFS (ubi0:2): recovery needed [ 10.232688][ T238] dataipa:start/load [ 10.344442][ T247] zram0: detected capacity change from 0 to 617480 [ 10.351556][ T255] 0 [ 10.358398][ T255] rootfs_a [ 10.361655][ T255] 1 [ 10.368990][ T255] rootfs_b [ 10.372041][ T255] 2 [ 10.378566][ T255] usrfs [ 10.378676][ T258] rmnet_core: loading out-of-tree module taints kernel. [ 10.382123][ T255] 3 [ 10.389051][ T258] rmnet_core: module verification failed: signature and/or required key missing - tainting kernel [ 10.408585][ T255] systemrw [ 10.411730][ T255] 4 [ 10.414591][ T240] done loading rmnet core modules [ 10.415164][ T233] UBIFS (ubi0:3): recovery completed [ 10.416974][ T257] (NULL device *): msm_gsi_probe:6257 No MSIs configured [ 10.432396][ T233] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "systemrw" [ 10.433388][ T236] UBIFS (ubi0:4): recovery needed [ 10.440920][ T233] UBIFS (ubi0:3): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.440927][ T233] UBIFS (ubi0:3): FS size: 4063232 bytes (3 MiB, 16 LEBs), max 25 LEBs, journal size 1777665 bytes (1 MiB, 5 LEBs) [ 10.440938][ T233] UBIFS (ubi0:3): reserved for root: 191915 bytes (187 KiB) [ 10.440942][ T233] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID F0BDF392-3D40-4E6C-A6C1-BF0ED46886C7, small LPT model [ 10.469523][ T265] Adding 308736k swap on /dev/zram0. Priority:10 extents:1 across:308736k SS [ OK ] Started Load datarmnet dlkm service. [ 10.498358][ T255] persist [ 10.507389][ T255] 5 [ OK ] Mounted /systemrw.[ 10.515042][ T255] volume id found for firmware_a, volume id 5 [ 10.525242][ T248] found volume index for firmware mount 5 Mounting Kernel Configuration File System... Mounting Kernel Debug File System... Mounting Temporary Directory (/tmp)...[ 10.560509][ T248] /dev/ubiblock0_5 desnt exists, creating [ OK ] Started QCMAP_Bootup service. Starting QCMAP_copybind service... [ OK ] Started irsc-util Service. [ OK ] Started qrtr-ns Service. Starting Netmgrd Service... [ OK ] Started SSREQ server Service. Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ 10.679560][ T278] block ubiblock0_5: created from ubi0:5(firmware_a) [ 10.740315][ T234] UBIFS (ubi0:2): recovery completed [ 10.746965][ T234] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "usrfs" [ 10.756055][ T234] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.767210][ T234] UBIFS (ubi0:2): FS size: 323534848 bytes (308 MiB, 1274 LEBs), max 2146 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 10.780992][ T234] UBIFS (ubi0:2): reserved for root: 0 bytes (0 KiB) [ 10.788826][ T234] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 1B3F5C46-A1F8-437D-9D45-16EBC3D3F603, small LPT model [ OK ] Mounted /data. [ 10.829135][ T248] root fstype is ubifs [ 10.841672][ T292] UBIFS (ubi0:5): Mounting in unauthenticated mode [ 10.853432][ T293] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 293 [ OK ] Started Netmgrd Service. [ 11.024336][ T292] UBIFS (ubi0:5): recovery needed [ 11.028400][ T236] UBIFS (ubi0:4): recovery completed [ 11.034764][ T236] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "persist" [ 11.043249][ T236] UBIFS (ubi0:4): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 11.054209][ T236] UBIFS (ubi0:4): FS size: 4063232 bytes (3 MiB, 16 LEBs), max 25 LEBs, journal size 1777665 bytes (1 MiB, 5 LEBs) [ 11.066538][ T236] UBIFS (ubi0:4): reserved for root: 191915 bytes (187 KiB) [ 11.073924][ T236] UBIFS (ubi0:4): media format: w5/r0 (latest is w5/r0), UUID 31DB6946-2311-4A31-84A8-93EC9D845AA7, small LPT model [ 11.100349][ T280] systemd-tmpfiles[280]: /etc/tmpfiles.d/platform.conf:38: Line references path below legacy directory /var/run/, updating /var/run/resolv.conf → /run/resolv.conf; please update the tmpfiles.d/ drop-in file accordingly. [ 11.118239][ T292] UBIFS (ubi0:5): recovery completed [ OK ] Mounted /persist. [ 11.132656][ T292] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "firmware_a" [ OK ] Started Staring tftp server. [ 11.142050][ T292] UBIFS (ubi0:5): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 11.158519][ T292] UBIFS (ubi0:5): FS size: 113008640 bytes (107 MiB, 445 LEBs), max 567 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 11.171454][ T292] UBIFS (ubi0:5): reserved for root: 0 bytes (0 KiB) [ 11.178268][ T292] UBIFS (ubi0:5): media format: w4/r0 (latest is w5/r0), UUID C29FF9FD-1B3D-48BF-B24A-DB5ABB24D898, small LPT model [ OK ] Started Create Static Device Nodes in /dev. firmware-mount.service: Succeeded. [ OK ] Started Mount firmware par…tion to /firmware mount point. Starting Service to trigge…em load based on remoteproc... [ 11.226919][ T311] remoteproc remoteproc0: powering up 4080000.remoteproc-mss Starting udev Kernel Device Manager... [ OK ] Started QCMAP_copybind service. Starting usb Service... [ 11.276890][ T311] remoteproc remoteproc0: Booting fw image modem.mdt, size 7420 QCMAP_copybind.service: Succeeded. [SSREQ-Server]I:Successfully started SSREQ server[ 11.589601][ T341] QCMAP_Bootup:Start Main [ 11.698796][ T314] systemd-udevd[314]: Network interface NamePolicy= disabled on kernel command line, ignoring. [ 11.731348][ T363] Mass Storage Function, version: 2009/09/11 [ 11.737388][ T363] LUN: removable file: (no medium) [ 11.745947][ T364] Mass Storage Function, version: 2009/09/11 [ 11.751982][ T364] LUN: removable file: (no medium) [ 11.775167][ T365] file system registered [ 11.796826][ T368] QCMAP_Bootup:Start DHCP server [ 11.820639][ T370] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0) [ 11.840429][ T373] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1) [ 11.919734][ T314] systemd-udevd[314]: Configuration file /etc/udev/rules.d/automountemmc.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.925916][ T267] ipam: no symbol version for gsi_cleanup_channel [ 11.937978][ T314] systemd-udevd[314]: Configuration file /etc/udev/rules.d/automountsdcard.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.971431][ T388] gsi_set_inst_name: prot_id = 2, prev inst do not freed yet [ 11.981510][ T314] systemd-udevd[314]: Configuration file /etc/udev/rules.d/ipacm.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.985034][ T267] ipa get_ipa_dts_configuration:11838 No gunyah-label info [ 12.004932][ T314] systemd-udevd[314]: Configuration file /etc/udev/rules.d/ipacm.rules is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 12.023038][ T372] dnsmasq (372) used greatest stack depth: 10320 bytes left [ 12.025595][ T314] systemd-udevd[314]: Configuration file /etc/udev/rules.d/mountpartitions.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 12.038366][ T397] dnsmasq --conf-file=/systemrw/data/dnsmasq.conf --dhcp-leasefile=/var/run/data/dnsmasq.leases --addn-hosts=/etc/data/hosts --pid-file=/var/run/data/dnsmasq.pid --resolv-file=/etc/resolv.conf -i bridge0 -I lo -z --dhcp-range=bridge0,192.168.225.20,192.168.225.60,255.255.255.0,43200 --dhcp-hostsfile=/etc/data/dhcp_hosts --dhcp-option-force=6,192.168.225.1 --dhcp-script=/bin/dnsmasq_script.sh [ 12.053718][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_ap: Adding to iommu group 9 [ 12.099419][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_wlan: Adding to iommu group 10 [ 12.100546][ T410] QCMAP_Bootup:DHCP server started [ 12.121676][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_uc: Adding to iommu group 11 [ OK ] Started udev Kernel Device Manager. [ 12.137423][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_wlan1: Adding to iommu group 12 [ 12.152798][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_wlan2: Adding to iommu group 13 [ 12.156721][ T428] systemd-udevd[428]: Using default interface naming scheme 'v243'. [ 12.174586][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_eth: Adding to iommu group 5 [ 12.185582][ T267] ipa 3e00000.qcom,ipa:ipa_smmu_eth1: Adding to iommu group 14 [ 12.198147][ T153] ipa ipa_smmu_11ad_cb_probe:13019 11AD SMMU is disabled [ 12.207421][ T454] QCMAP_Bootup ecm mapped to bridge0 [ 12.230731][ T440] write to ipa devnode [ 12.230816][ T455] rmnet_ipa3 started initialization [ 12.242189][ T456] QCMAP_Bootup:Init Complete [ 12.253769][ T153] IPA FW loaded successfully [ 12.264369][ T439] write to ipa devnode [ 12.264700][ T153] gsi soc:qcom,msm_gsi: gsi_register_device:1574 GSI irq is wake enabled 37 [ 12.295810][ T153] ipa_ut ipa_ut_module_init:1037 Loading IPA test module... [ 12.303479][ T153] ipa-lnx-stats ipa_tlpd_stats_ioctl_init:1966 IPA ipa_lnx_stats_ioctl major(492) initial ok :>>>> [ 12.314417][ T153] ipa-lnx-stats ipa_tlpd_stats_init:1989 IPA_LNX_STATS_IOCTL init success [ 12.323032][ T153] IPA driver initialization was successful. [ 12.336437][ T466] RNDIS_IPA module is loaded. [ 12.345830][ T462] write to ipa devnode [ 12.367956][ T489] ecm driver init [ 12.500617][ T494] IPA clients manager init [ 12.505064][ T494] ipa_usb driver init [ 12.512326][ T494] ipa_usb registered successfully [ 12.517378][ T494] exit: IPA_USB init success! [ 12.522048][ T494] ipa_wdi3 registered successfully [ 12.527163][ T494] ipa_gsb registered successfully [ 12.532189][ T494] ipa_uc_offload registered successfully [ 12.537845][ T494] ipa_mhi registered successfully [ 12.542941][ T494] ipa_wigig registered successfully [ 12.548147][ T494] ipa_eth registered successfully [ 12.553219][ T68] rmnet_ipa3 started initialization [ 12.558443][ T68] IPA SSR support = True [ 12.562666][ T68] IPA SG support = True [ 12.566809][ T68] using default for wan-rx-desc-size = 256 [ 12.568915][ T526] Switching to composition number 0x901D [ 12.572739][ T494] IPA driver is now in ready state [ 12.583499][ T494] ipa_qdss registered successfully [ 12.590138][ T68] ipa-wan ipa3_wwan_register_netdev_pm_client:4952 rmnet_ipa%d register done [ 12.599420][ T238] done loading dataipa core modules [ OK ] Started Load dataipa dlkm. [ 12.609624][ T68] ipa-wan ipa3_wwan_probe:5179 rmnet_ipa completed initialization [ OK ] Started usb Service. [ OK ] Started diag-router Service. Starting adbd Service... [ 12.675881][ T549] Launch adb is starting adbd... [ 12.691892][ T544] read descriptors [ 12.700795][ T544] read strings [ 12.710529][ T542] dwc3 a600000.dwc3: request 0000000000000000 was not queued to ep0out [ 12.718936][ T542] udc a600000.dwc3: failed to start g1: -19 [ 12.837509][ T562] read descriptors [ 12.841260][ T562] read strings [ 12.872945][ T562] dwc3 a600000.dwc3: Set IRQ thread:irq/168-dwc3 pid:563 to SCHED_NORMAL prio [ 12.995691][ T67] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 13.142834][ T67] android_work: sent uevent USB_STATE=CONNECTED [ 13.183044][ T67] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 13.190177][ T67] android_work: sent uevent USB_STATE=CONFIGURED [ OK ] Started adbd Service. [*** ] (1 of 4) A start job is running for /dev/input/event0 (10s / 1min 30s) [ 13.779839][ T549] Started adbd. [ 20.352322][ T311] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:5674 IPA received MPSS AFTER_POWERUP [ 20.364613][ T311] ipa ipa3_odl_pipe_open:371 adpl pipe not configured [ 20.369997][ T55] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 20.371686][ T311] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:5687 IPA AFTER_POWERUP handling is complete [ 20.377540][ C0] qrtr: Modem QMI Readiness TX cmd:0x2 node[0x0] [ 20.386812][ T311] remoteproc remoteproc0: remote processor 4080000.remoteproc-mss is now up [ 20.393163][ C0] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x0] [ OK ] Started Service to trigger…odem load based on remoteproc. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 20.433234][ T571] systemd-tmpfiles[571]: /etc/tmpfiles.d/platform.conf:38: Line references path below legacy directory /var/run/, updating /var/run/resolv.conf → /run/resolv.conf; please update the tmpfiles.d/ drop-in file accordingly. [ 20.500727][ T571] systemd-tmpfiles[571]: symlink(/etc/machine-id, /var/lib/dbus/machine-id) failed: Read-only file system [ 20.516891][ T571] systemd-tmpfiles[571]: Failed to open directory 'coredump': No such file or directory [ 20.527043][ T52] coresight-remote-etm soc:modem2_etm0: Connection established between QMI handle and 11 service [ 20.527165][ T571] systemd-tmpfiles[571]: Failed to open directory 'private': No such file or directory [ 20.527283][ T133] coresight-remote-etm soc:modem_etm0: Connection established between QMI handle and 2 service [ 20.558639][ T571] systemd-tmpfiles[571]: Failed to open directory 'private': No such file or directory [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started D-Bus System Message Bus. [ 20.627763][ T41] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 [ 20.648056][ T57] ipa ipa3_uc_wdi_event_log_info_handler:398 WDI stats ofst=0x141100 [ 20.656300][ T57] ipa ipa3_uc_ntn_event_log_info_handler:19 NTN protocol missing 0x9 Starting Logd logging Service...[ 20.667181][ T41] ipa-wan ipa3_q6_clnt_svc_arrive:1870 send ipa3_qmi_init_modem_send_sync_msg to modem rc:0 Starting IPACM Service... Starting udev Coldplug all Devices... [ OK ] Started Logd logging Service. [ OK ] Started Monitor /dev/socket path to start logd. [ OK ] Reached target Paths. [ 20.921557][ T581] logd.auditd: start [ 20.925635][ T581] logd.klogd: 20921401709 [ 20.982955][ T597] write to ipa devnode [ OK ] Started IPACM Service. Starting QCMAP connectionManager service... [ 21.158886][ T642] cnss2 script called from: qcmap [ 21.474538][ T676] QCMAP: Start [ OK ] Started QCMAP connectionManager service. [ OK ] Reached target Sockets. [ OK ] Started Post modem boot service. [ 21.703662][ T641] netlink: 4 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 21.739144][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: PHY [stmmac_dev0-0:00] driver [RTL9010AA_RTL9010AN Ethernet] (irq=POLL) [ 21.752104][ T718] qcom-ethqos: stmmac_init_phy early eth setting stmmac init [ 21.760152][ T718] qcom-ethqos: stmmac_init_phy priv phydev is null Starting qti service... [ 21.789145][ T718] qcom-ethqos: stmmac_init_phy priv->phydev is set with dev->phydev [ 21.799616][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-1 [ 21.815735][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-2 Starting Bind mount volatile /etc/ObeConfig.conf... [ 21.840133][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-3 Starting Bind mount volatile /etc/data/adpl/... [ 21.876857][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-4 Starting Bind mount volatile /etc/data/ipa/... Starting Bind mount volatile /etc/data/usb/... Starting Bind mount volatile /etc/data/...[ 21.947948][ T718] qcom-ethqos ethqos_serdes_power_up:1799 ethqos_serdes_power_up : speed = 10 interface = 4 Starting Bind mount volatile /etc/cv2x/enable... [ 21.947996][ T718] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1385 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000 [ 21.981566][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: No Safety Features support found [ 22.004100][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: IEEE 1588-2008 Advanced Timestamp supported [ 22.014182][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: registered PTP clock Starting Bind mount volatile /etc/misc/wifi/... [ 22.030975][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: FPE workqueue start Starting Bind mount volatile /etc/tel.conf... [ OK ] Started udev Coldplug all Devices. [ 22.057584][ T718] qcom-ethqos 23040000.qcom,emac0 eth0: configuring for phy/sgmii link mode postmss.service: Succeeded. [ OK ] Started qti service. [ OK ] Started Bind mount volatile /etc/ObeConfig.conf. [ OK ] Started Bind mount volatile /etc/data/usb/. [ OK ] Started Bind mount volatile /etc/cv2x/enable. [ 22.133357][ T403] ipa ipa3_set_aggr_limit:5875 get close-by 8192 [ 22.139799][ T403] ipa ipa3_set_aggr_limit:5877 set default rx_buff_sz 7744 [ 22.150006][ T849] Found mmcblk0 add [ 22.154306][ T849] Reading partition from mmcblk0 [ OK ] Started Bind mount volatile /etc/data/ipa/. [ 22.162936][ T403] ipa ipa3_set_aggr_limit:5870 set rx_buff_sz config from netmngr 16384 [ OK ] Started Bind mount volatile /etc/data/adpl/. [ OK ] Started Bind mount volatile /etc/tel.conf. [ 22.230680][ T881] QTI: Start main [ 22.237805][ T869] QCMAP: HW Address for dev bridge0: 5e:bb:6d:ad:a6:74 [ OK ] Reached target Hardware activated USB gadget. [ OK ] Found device /dev/input/event0. QCMAP_Bootup.service: Succeeded. [ 22.348850][ T943] QCMAP_Bootup kill complete [ 22.351027][ T403] ipa-wan ipa3_wwan_ioctl:4250 dev(rmnet_data0) register to IPA [ 22.366580][ T893] Disk /dev/mmcblk0: 7456 MB, 7818182656 bytes, 15269888 sectors [ 22.366580][ T893] 238592 cylinders, 4 heads, 16 sectors/track [ 22.366580][ T893] Units: sectors of 1 * 512 = 512 bytes [ 22.366580][ T893] [ 22.366580][ T893] Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type [ 22.366580][ T893] /dev/mmcblk0p1 0,1,1 1023,3,16 16 15269887 15269872 7455M 83 Linux [ 22.409833][ T849] mmcblk0 status: 1 [ 22.448440][ T964] QTI: NO ETH PH enabled [ 22.463217][ T970] QTI: DPM Init cb [ 22.480315][ T979] QTI: Modem In Service [ 22.480795][ T980] QCMAP:Start DHCP server [ 22.531044][ T1002] Found mmcblk0p1 add [ 22.535148][ T1002] Trying to mount mmcblk0p1 at : /mnt/internal_storage [ OK ] Started Bind mount volatile /etc/misc/wifi/. [ OK ] Created slice system-dnsmasq_service.slice. [ 22.584406][ T1015] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem Starting dnsmasq service... [ 22.603376][ T1030] Starting DNSMASQ SERVICE arg1: /var/run/data/dnsmasq_env.conf agr2: vlan [ 22.623004][ T1002] Failed to mount ext4 mmcblk0p1 to : /mnt/internal_storage status:32 [ 22.633804][ T1030] launching dnsmasq for tpie vlan inst [ OK ] Started dnsmasq service. [ 22.707579][ T1081] QCMAP:DHCP server started [ 22.743125][ T1101] device bridge0 entered promiscuous mode [ 22.916750][ T1145] CDI: Init func for CDI [ OK ] Started Bind mount volatile /etc/data/. [ OK ] Reached target Basic System. [ OK ] Started Create overlays fo…ls, /var/lib/selinux in /data. [ OK ] Started adpl service. [ OK ] Started Atfwd_daemon Service. Starting Bluetooth Power Service... Starting System Logging Service... Starting NTP client/server... [ OK ] Started CV2X Daemon Service. [ OK ] Started data-init service. [ 23.010143][ T1161] write to ipa devnode [ 23.029390][ T1177] bt_dt_parse_vreg_info: qcom,bt-vdd-ctrl2 is not provided in device tree [ OK ] Started EMAC_IOSS. [ OK ] Started Getty on tty1. Starting init-can Service... [ 23.074847][ T1177] bt-sw-ctrl-gpio not provided in devicetree Starting Audio Init Service... [ 23.097452][ T1184] (NULL device *): ioss:cfg:IOSS version 0x1000000, API version 6 [ 23.102616][ T1177] bt-debug-gpio not provided in devicetree [ 23.106192][ T431] mtdblock: MTD device 'misc' is NAND, please consider using UBI block devices instead. [ 23.125323][ T427] mtdblock: MTD device 'keystore' is NAND, please consider using UBI block devices instead. Starting MODPROBE_CNSS2_MODULE...[ 23.147568][ T1184] (NULL device *): ioss:cfg:Root device probe completed [ 23.147596][ T153] (NULL device *): ioss:cfg:IPA is ready Starting IPv6 Packet Filtering Framework...[ 23.182696][ T1177] xo-clk-gpio not provided in devicetree [ 23.189453][ T1198] audio:start/load Starting IPv4 Packet Filtering Framework... [ 23.197959][ T153] (NULL device *): ioss:cfg:Starting PCI [ 23.200674][ T427] mtdblock: MTD device 'sbl' is NAND, please consider using UBI block devices instead. [ 23.201614][ T1177] bt_dt_parse_clk_info: clocks is not provided in device tree [ 23.201619][ T1177] bt_power_populate_dt_pinfo: clock not provided in device tree [ 23.201758][ T1177] btpower_aop_mbox_init: failed to get mbox channel [ 23.203298][ T426] mtdblock: MTD device 'sbl_b' is NAND, please consider using UBI block devices instead. [ 23.204646][ T423] mtdblock: MTD device 'tz' is NAND, please consider using UBI block devices instead. [ 23.215389][ T1184] (NULL device *): ioss:cfg:Registering Platform driver qcom-ethqos_ioss [ 23.225537][ T420] mtdblock: MTD device 'tz_devcfg' is NAND, please consider using UBI block devices instead. Starting logd logging service... [ 23.284008][ T1204] cnss2 script called from: atrdemo [ 23.284161][ T1204] start to load cnss2 [ 23.287619][ T1184] qcom-ethqos_ioss 23040000.qcom,emac0-ioss: ioss:cfg:(eth0) addr: , driver: st_xgmac Jan_2016, firmware: , erom: [ OK ] Started Load mvm dlkm service. [ 23.311032][ T420] mtdblock: MTD device 'apdp' is NAND, please consider using UBI block devices instead. Starting Port bridge Service... [ 23.328546][ T419] mtdblock: MTD device 'keymaster' is NAND, please consider using UBI block devices instead. Starting Load qcedev dlkm service... [ 23.349099][ T1184] qcom-ethqos_ioss 23040000.qcom,emac0-ioss: ioss:cfg:(eth0) creating dev char device for auto platform [ 23.349099][ T1184] [ OK ] Started Modem Shutdown Service. [ OK ] Started Load qrng dlkm service. [ 23.396382][ T438] mtdblock: MTD device 'xbl_config' is NAND, please consider using UBI block devices instead. [ 23.445676][ T420] mtdblock: MTD device 'xbl_ramdump' is NAND, please consider using UBI block devices instead. [ 23.464318][ T1249] netlink: 8 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 23.475086][ T1224] mvm 10000000.qcom,mvm: Adding to iommu group 15 [ OK ] Started reboot-daemon service. [ 23.487364][ T1251] QCMAP:Netlink Query to Kernel Success [ OK ] Started Serial Getty on ttyMSM0. [ 23.511978][ T1249] netlink: 8 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ OK ] Reached target Login Prompts. [ 23.515604][ T1224] mvm 10000000.qcom,mvm: The current state of MVM is OFFLINE Starting Load smcinvoke dlkm service... [ 23.542674][ T1257] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:spf_core:1:3 [ 23.551223][ T422] mtdblock: MTD device 'cmnlib64' is NAND, please consider using UBI block devices instead. Starting ssgtzd Service... [ OK ] Started Telux Config Server. [ 23.575786][ T1262] ssgtzd Service started [ 23.580938][ T1260] smcinvoke:start/load [ 23.586348][ T428] mtdblock: MTD device 'multi_oem' is NAND, please consider using UBI block devices instead. [ 23.591471][ T1257] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:audio-pkt:1:17 [ OK ] Started Telux Thermal Server. [ 23.617191][ T1257] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:audio_prm:1:7 Starting Thermal Engine Service... [ 23.636365][ T35] audio_notifier_reg_service: service SSR_MODEM is in use [ OK ] Started Throttle Manager Service. [ 23.645812][ T1257] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: gpr_probe: gpr-lite probe success Starting time serviced Service... [ OK ] Started Load tz_log dlkm service. [ 23.673066][ T424] mtdblock: MTD device 'mibib' is NAND, please consider using UBI block devices instead. [ 23.680296][ T35] gpr_modem_up: called [ 23.691290][ T420] mtdblock: MTD device 'multi_qti' is NAND, please consider using UBI block devices instead. [ 23.700304][ T35] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: gpr_notifier_register: registered via subsys_notif_register for domain id(1) [ 23.703099][ T428] mtdblock: MTD device 'aop' is NAND, please consider using UBI block devices instead. [ OK ] Started Bluetooth Power Service. [ OK ] Started System Logging Service. [ OK ] Started NTP client/server. [ 23.740662][ T1224] mvm 10000000.qcom,mvm: MVM GSDC powered up data-init.service: Succeeded. [ 23.748466][ T422] mtdblock: MTD device 'aop_devcfg' is NAND, please consider using UBI block devices instead. [ 23.756958][ T428] mtdblock: MTD device 'qhee' is NAND, please consider using UBI block devices instead. [ 23.762606][ T428] mtdblock: MTD device 'abl' is NAND, please consider using UBI block devices instead. [ 23.782178][ T1226] cnss: Failed to get mbox channel [ OK ] Started init-can Service. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Started Port bridge Service. [ OK ] Started Load qcedev dlkm service. [ 23.814351][ T424] mtdblock: MTD device 'uefi' is NAND, please consider using UBI block devices instead. ssgtzd.service: Main process exited, code=exited, status=203/EXEC ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ 23.816917][ T1274] spf_core_platform_driver_probe [ 23.816958][ T1274] spf_core_probe [ 23.817696][ T35] spf_core_add_child_devices:enumarate machine driver [ 23.832402][ T428] mtdblock: MTD device 'shrm' is NAND, please consider using UBI block devices instead. [ 23.865736][ T428] mtdblock: MTD device 'cpucpfw' is NAND, please consider using UBI block devices instead. [ OK ] Found device /dev/binder. [ 23.897850][ T52] cnss: QMI DMS service connected, state: 0x100000 [ OK ] Reached target Network (Pre). [ 23.909737][ T1224] mvm 10000000.qcom,mvm: MVM subsystem brought out of reset Starting Chrony Sock Source... [ 23.923752][ T1224] mvm 10000000.qcom,mvm: The current state of MVM is ONLINE [ 23.924347][ T35] spf-core-platform soc:spf_core_platform: __spf_core_is_apm_ready: send_command ret [ 23.939905][ T438] mtdblock: MTD device 'qupfw' is NAND, please consider using UBI block devices instead. [ 23.954274][ T422] mtdblock: MTD device 'dtbo' is NAND, please consider using UBI block devices instead. [ 23.955342][ T1224] mvm 10000000.qcom,mvm: mvm_stats device created [ 23.972366][ T1226] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. [ OK ] Started powermanager-daemon Service. [ 23.980373][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: Payload 2001007 [ 23.993237][ T1281] qce 1de0000.qcedev: Adding to iommu group 16 [ 23.995041][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: sucess response received [ 24.012058][ T1281] qcedev_probe_device: No icc avg BW set, using default [ 24.013949][ T35] spf-core-platform soc:spf_core_platform: spf_core_add_child_devices: apm is up [ 24.019629][ T1281] qcedev_probe_device: No icc peak BW set, using default [ 24.033324][ T1226] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ OK ] Started ethpwrmgr service.[ 24.045776][ T1224] gcc-sdxpinn 80000.clock-controller: sync-state [ 24.068390][ T1281] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ [ 24.068952][ T1297] audio_prm_probe: prm probe success [ 24.069768][ T153] tz_log_dlkm:[tzdbg_get_tz_version][1724]: tz diag version is 2404000 [ 24.069867][ T153] tz_log_dlkm:[tzdbg_query_encrypted_log][1758]: encrypted qseelog enabled is 0 [ 24.069892][ T153] tz_log_dlkm:[tzdbg_init_tme_log][1412]: Tme Crashdump address offset need to be defined! [ 24.069896][ T153] tz_log_dlkm:[tz_log_probe][1880]: Tme log initialization failed! [ 24.079820][ T1226] pcie_phy_init: PCIe RC2 PHY is ready! [ 24.104565][ T1281] qce 1de0000.qcedev: QTI Crypto 5.7.0 device found @0x1de0000 [ 24.113518][ T419] mtdblock: MTD device 'efs_backup' is NAND, please consider using UBI block devices instead. [ 24.133748][ T1226] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ 24.145992][ T1281] sps_register_bam_device: sps:BAM 0x0000000001dc4000 is registered [ 24.162806][ T1281] sps_bam_enable: sps:BAM 0x0000000001dc4000 (va:0x0000000000000000) enabled: ver:0x28, number of pipes:20 [ 24.174665][ T1281] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 21 [ 24.176575][ T1226] msm_pcie_link_train: PCIe RC2 link initialized [ 24.191274][ T1226] pci-msm 1c10000.qcom,pcie: host bridge /soc/qcom,pcie@1c10000 ranges: [ 24.199950][ T1226] pci-msm 1c10000.qcom,pcie: No bus range found for /soc/qcom,pcie@1c10000, using [bus 00-ff] [ 24.212701][ T1226] pci-msm 1c10000.qcom,pcie: MEM 0x006c200000..0x006fffffff -> 0x006c200000 [ 24.224183][ T428] mtdblock: MTD device 'tz_devcfg_b' is NAND, please consider using UBI block devices instead. [ 24.229015][ T1226] pci-msm 1c10000.qcom,pcie: MSI: synopsys controller is present [ 24.234871][ T1224] insmod (1224) used greatest stack depth: 9120 bytes left [ 24.264088][ T1281] qce 1de0000.qcedev:qcom_cedev_ns_cb: Adding to iommu group 16 [ OK ] Started Service manager Service. [ 24.286219][ T426] mtdblock: MTD device 'tz_b' is NAND, please consider using UBI block devices instead. [ 24.297313][ T1303] msm-audio-ion soc:qcom,msm-audio-ion: msm_audio_ion_probe: msm_audio_ion_probe [ 24.324151][ T424] mtdblock: MTD device 'keymaster_b' is NAND, please consider using UBI block devices instead. [ 24.324505][ T1226] pci-msm 1c10000.qcom,pcie: PCI host bridge to bus 0002:00 [ 24.344446][ T1226] pci_bus 0002:00: root bus resource [bus 00-ff] [ 24.353027][ T1226] pci_bus 0002:00: root bus resource [mem 0x6c200000-0x6fffffff] [ 24.363551][ T1226] pci 0002:00:00.0: [17cb:0309] type 01 class 0x060400 [ OK ] Started Load smcinvoke dlkm service. [ 24.373223][ T1226] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 24.387823][ T1226] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 24.395364][ T438] mtdblock: MTD device 'boot' is NAND, please consider using UBI block devices instead. [ 24.395542][ T1226] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ 24.422577][ T65] mvm 10000000.qcom,mvm: MVM License file is read and the max rate supported by MVM is 0 [ OK ] Started time serviced Service. [ OK ] Started logd logging service. [ 24.476346][ T1226] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ OK ] Started Chrony Sock Source. ssgtzd.service: Scheduled restart job, restart counter is at 1. [ 24.540554][ T1226] pci 0002:01:00.0: [17cb:1103] type 00 class 0x028000 [ 24.556621][ T1226] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] Starting sensor remote service launcher... [ 24.570259][ T438] mtdblock: MTD device 'apdp_b' is NAND, please consider using UBI block devices instead. [ 24.585251][ T1226] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 24.595486][ T427] mtdblock: MTD device 'cmnlib64_b' is NAND, please consider using UBI block devices instead. [ 24.595773][ T1226] pci 0002:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0002:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link) [ 24.605774][ T431] mtdblock: MTD device 'multi_oem_b' is NAND, please consider using UBI block devices instead. [ 24.608364][ T438] mtdblock: MTD device 'xbl_ramdump_b' is NAND, please consider using UBI block devices instead. [ 24.608874][ T423] mtdblock: MTD device 'multi_qti_b' is NAND, please consider using UBI block devices instead. [ 24.623837][ T423] mtdblock: MTD device 'efs2' is NAND, please consider using UBI block devices instead. [ 24.632382][ T419] mtdblock: MTD device 'xbl_config_b' is NAND, please consider using UBI block devices instead. [ 24.654083][ T438] mtdblock: MTD device 'aop_b' is NAND, please consider using UBI block devices instead. [ 24.704631][ T1182] cv2x-daemon: Starting CV2X Daemon Service [ 24.753659][ T1226] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 24.761517][ T1226] pci 0002:00:00.0: BAR 8: assigned [mem 0x6c200000-0x6c3fffff] [ 24.770293][ T1226] pci 0002:00:00.0: BAR 9: assigned [mem 0x6c400000-0x6c5fffff 64bit pref] [ 24.779355][ T426] mtdblock: MTD device 'abl_b' is NAND, please consider using UBI block devices instead. [ 24.782828][ T1226] pci 0002:00:00.0: BAR 1: assigned [mem 0x6c600000-0x6c60ffff] [ 24.798125][ T1226] pci 0002:00:00.0: BAR 0: assigned [mem 0x6c610000-0x6c610fff] [ OK ] Started Ril Daemon. [ 24.806599][ T1226] pci 0002:00:00.0: BAR 7: no space for [io size 0x1000] [ 24.820395][ T1226] pci 0002:00:00.0: BAR 7: failed to assign [io size 0x1000] [ 24.828434][ T1226] pci 0002:01:00.0: BAR 0: assigned [mem 0x6c200000-0x6c3fffff 64bit] [ 24.837961][ T1226] pci 0002:00:00.0: PCI bridge to [bus 01] [ 24.846802][ T1226] pci 0002:00:00.0: bridge window [mem 0x6c200000-0x6c3fffff] [ 24.859801][ T1226] pci 0002:00:00.0: bridge window [mem 0x6c400000-0x6c5fffff 64bit pref] [ 24.870093][ T419] mtdblock: MTD device 'qhee_b' is NAND, please consider using UBI block devices instead. [ 24.881329][ T1226] mhi 0002:00:00.0: Adding to iommu group 17 [ 24.888661][ T428] mtdblock: MTD device 'qupfw_b' is NAND, please consider using UBI block devices instead. rild2.service: Ignoring invalid environment assignment 'persist.radio.mt_sms_ack=30': /etc/tel.conf [ 24.905806][ T424] mtdblock: MTD device 'uefi_b' is NAND, please consider using UBI block devices instead. rild2.service: Ignoring invalid environment assignment 'tel.disable_ind=0x1': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'data.disable_ind_during_suspend=0x0000000F': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'sensor.disable_ind_during_suspend=0x01': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'loc.disable_in+▒▒rʊ▒ʢ▒▒m▒ T427] mtdblock: MTD device 'aop_devcfg_b' is NAND, please consider using UBI block devices instead. [ 24.970281][ T423] mtdblock: MTD device 'shrm_b' is NAND, please consider using UBI block devices instead. [ 24.984827][ T1226] mhi 0002:00:00.0: BAR 0: assigned [mem 0x6c610000-0x6c610fff] [ 24.992680][ T1226] mhi 0002:00:00.0: enabling device (0000 -> 0002) [ 25.016448][ T1226] [E][mhi_arch_pcie_init] No interconnect name specified [ 25.046380][ T438] mtdblock: MTD device 'dtbo_b' is NAND, please consider using UBI block devices instead. Starting Rild2 Launcher... [ 25.107096][ T422] mtdblock: MTD device 'cpucpfw_b' is NAND, please consider using UBI block devices instead. [ OK ] Started Rilmuxd Daemon. [ 25.160468][ T422] mtdblock: MTD device 'sec' is NAND, please consider using UBI block devices instead. [ OK ] Stopped ssgtzd Service. [ 25.161596][ T1435] cv2x-daemon: Initializing Data subsytem [ 25.188443][ T423] mtdblock: MTD device 'boot_b' is NAND, please consider using UBI block devices instead. [ 25.194875][ T424] mtdblock: MTD device 'ddr' is NAND, please consider using UBI block devices instead. [ 25.255236][ T424] systemd-udevd[424]: Using default interface naming scheme 'v243'. Starting ssgtzd Service... [ 25.267933][ T641] netlink: 4 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 25.280658][ T1226] mhi: probe of 0002:00:00.0 failed with error -2 [ 25.283416][ T1449] QCMAP: Received Resume State [ 25.310305][ T438] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. [ 25.321223][ T1451] QCMAP: Interface Up for eth0 [ 25.321223][ T1454] QCMAP:Netlink Query to Kernel Success [ 25.333571][ T1460] QCMAP: DSI Init Callback Received dsi_mode:5 [ 25.335226][ T67] msm_pcie_enumerate: PCIe: RC2: has already been enumerated. [ OK ] Started sensor remote service launcher. [ 25.349479][ T419] mtdblock: MTD device 'system' is NAND, please consider using UBI block devices instead. rild2.service: Succeeded. [ 25.396814][ T427] mtdblock: MTD device 'recoveryinfo' is NAND, please consider using UBI block devices instead. [ 25.423095][ T1226] cnss_pci 0002:01:00.0: Adding to iommu group 18 [ OK ] Started Rild2 Launcher. ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 25.468954][ T1445] ssgtzd Service started [ 25.468954][ T1469] QCMAP: Eth SW-IP filter count: 0 for iface: eth0 [ 25.484144][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.494008][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.503518][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.513331][ T1226] cnss_pci 0002:01:00.0: assigned reserved memory node cnss_wlan_region [ 25.513689][ T1491] QCMAP:Enable mobileap [ 25.526011][ T1226] cnss_pci 0002:01:00.0: BAR 0: assigned [mem 0x6c200000-0x6c3fffff 64bit] [ 25.536592][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.546282][ T1226] cnss_pci 0002:01:00.0: enabling device (0000 -> 0002) [ 25.553417][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.563700][ T1419] sdx-asoc-snd soc:sound-auto: control 2:0:0:MI2S Mode:0 is already present [ 25.573066][ T1419] tlv320aic32x4 6-0018: ASoC: Failed to add MI2S Mode: -16 [ 25.580517][ T1419] msm_int_audrx_init: add_codec_controls failed, -16 [ 25.587380][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc rilmuxd2.service: Ignoring invalid environment assignment 'persist.radio.mt_sms_ack=30': /etc/tel.conf [ 25.603010][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc rilmuxd2.service: Ignoring invalid environment assignment 'tel.disable_ind=0x1': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'data.disable_ind_during_suspend=0x0000000F': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'sensor.disable_ind_during_suspend=0x01': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'loc.disable_ind_during_suspend=0x01': /etc/tel.conf Starting Rilmuxd2 Launcher... [ 25.696492][ T1505] QCMAP:Enable mobileap done ssgtzd.service: Failed with result 'exit-code'. [ 25.696816][ T1419] sdx-asoc-snd soc:sound-auto: control 2:0:0:MI2S Mode:0 is already present [ 25.719481][ T1419] msm-stub-codec soc:qcom,msm-stub-codec: ASoC: Failed to add MI2S Mode: -16 [ 25.728876][ T1419] msm_int_audrx_init: add_codec_controls failed, -16 [ 25.729304][ T1465] \n changing permission on radio:radio /dev/mtd7 (user:group) [ 25.736287][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.752700][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.761835][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.771290][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.780394][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.789497][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.790152][ T1511] QCMAP: DSD service available [ 25.799224][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.807652][ T423] mtdblock: MTD device 'emac' is NAND, please consider using UBI block devices instead. [ 25.822678][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.832546][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.841695][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.850792][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [FAILED] Failed to start ssgtzd Service. [ 25.860389][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc See 'systemctl status ssgtzd.service' for details. [ 25.879835][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.889377][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.898947][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.908348][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.917770][ T1419] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc rilmuxd2.service: Succeeded. [ OK ] Started Rilmuxd2 Launcher. sensor_hal_daemon.service: Succeeded. [ 25.988341][ T1435] cv2x-daemon: Data subsytem ready ssgtzd.service: Scheduled restart job, restart counter is at 2. [ 26.000540][ T1226] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC2. [ OK ] Stopped ssgtzd Service. [ 26.012037][ T1226] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. Starting ssgtzd Service... ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 26.029660][ T1226] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 26.046558][ T1226] pcie_phy_init: PCIe RC2 PHY is ready! [ 26.058051][ T1419] sdx-asoc-snd soc:sound-auto: msm_asoc_machine_probe: Sound card sdx-auto-i2s-snd-card registered [ 26.058074][ T1541] ssgtzd Service started [ 26.062630][ T1226] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ 26.070043][ T1419] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for tdm max slots [ 26.079188][ T1226] msm_pcie_link_train: PCIe RC2 link initialized [ 26.080888][ T1419] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: Using default tdm max slot: 8 [ 26.080908][ T1419] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for tdm clk attribute, set to default [ 26.118135][ T1226] (NULL device *): ioss:cfg:Adding device 0002:01:00.0 [ 26.119540][ T1419] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for mi2s clk attribute, set to default [ 26.125451][ T1226] ioss 0002:01:00.0-ioss: ioss:ERR:(0002:01:00.0) Failed to register device with ioss bus ssgtzd.service: Failed with result 'exit-code'.[ 26.136504][ T1419] sdx-asoc-snd soc:sound-auto: num_links 22 [ 26.146694][ T1226] cnss: Platform driver probed successfully. [ 26.159080][ T1419] sdx-asoc-snd soc:sound-auto: sdx_ssr_enable: setting snd_card to ONLINE [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ OK ] Started Audio Init Service. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 1. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... Starting Agm Server Init... ssgtzd.service: Scheduled restart job, restart counter is at 3. [ OK ] Stopped ssgtzd Service. Starting ssgtzd Service... ssgtzd.service: Main process exited, code=exited, status=203/EXEC ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ OK ] Started sensor remote service launcher. sensor_hal_daemon.service: Succeeded. [ OK ] Found device /dev/smcinvoke. Starting Qseecomd Service... [ OK ] Started Thermal Engine Service. [ OK ] Started Qseecomd Service. Starting Qwesd Service... [ OK ] Started sfs configuration Service. [ 26.371668][ T1579] ssgtzd Service started [ 26.501198][ T1599] Creating QWES LICENSE STORE : /persist/data/pfm/licenses/ [ OK ] Started Tsens Service. [ OK ] Started Agm Server Init. ssgtzd.service: Scheduled restart job, restart counter is at 4. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 2. [ 26.593927][ T1609] Creating qwes_ipc [ OK ] Reached target Sound Card. [ OK ] Stopped sensor remote service launcher. [ 26.611570][ T1600] SFS configuration started. Starting sensor remote service launcher... [ OK ] Stopped ssgtzd Service. Starting ssgtzd Service... [ OK ] Started Telux Audio Server. ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 26.623691][ T1616] ssgtzd Service started ssgtzd.service: Failed with result 'exit-code'. [ 26.643451][ T1600] SFS configuration completed. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ OK ] Started Qwesd Service. [ 26.671096][ T1623] Qwesd Service Completed [ 26.702465][ T1631] smcinvoke: process_accept_req: Setting pid:1631, server id : 17 state to defunct [ 26.717213][ T1630] smcinvoke: process_accept_req: Setting pid:1630, server id : 17 state to defunct [ 26.731489][ T1629] smcinvoke: process_accept_req: Setting pid:1629, server id : 17 state to defunct [ 26.744083][ T1627] smcinvoke: process_accept_req: Setting pid:1627, server id : 17 state to defunct throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. ssgtzd.service: Scheduled restart job, restart counter is at 5. [ OK ] Stopped ssgtzd Service. ssgtzd.service: Start request repeated too quickly. ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ OK ] Started sensor remote service launcher. [ OK ] Started GPS Location process launcher. Starting location remote service launcher... [ OK ] Started location remote service launcher. sensor_hal_daemon.service: Succeeded. [ OK ] Started Location App. throttleman.service: Scheduled restart job, restart counter is at 1. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 3. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... [ OK ] Stopped Throttle Manager Service. [ OK ] Started Throttle Manager Service. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. [ OK ] Started sensor remote service launcher. throttleman.service: Scheduled restart job, restart counter is at 2. [ OK ] Stopped Throttle Manager Service. [ OK ] Started Throttle Manager Service. sensor_hal_daemon.service: Succeeded. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 4. throttleman.service: Scheduled restart job, restart counter is at 3. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... [ OK ] Stopped Throttle Manager Service. [ OK ] Started Throttle Manager Service. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. [ OK ] Started sensor remote service launcher. sensor_hal_daemon.service: Succeeded. throttleman.service: Scheduled restart job, restart counter is at 4. sensor_hal_daemon.service: Start request repeated too quickly. sensor_hal_daemon.service: Failed with result 'start-limit-hit'. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. [ 28.188059][ T1551] qca6490: Loading driver v5.2.1.43M +PANIC_ON_BUG; cld:; cmn:; dev:wlan [ 28.200351][ T165] cnss: PCI link is already resumed throttleman.service: Scheduled restart job, restart counter is at 5. throttleman.service: Start request repeated too quickly. throttleman.service: Failed with result 'exit-code'. chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. chrony-sock.service: Scheduled restart job, restart counter is at 1. chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. QTI Linux Telematics distro with debug capabilities. android-1.0-25-g42ad0b88 sa525m ttyMSM0 sa525m login: chrony-sock.service: Scheduled restart job, restart counter is at 2. chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. [ 29.624009][ T153] cnss: QMI WLFW service connected, state: 0x4d06011 [ 29.685208][ T153] cnss: TCS CMD not configured for IPA Vreg enable [ 29.691777][ T153] cnss: Host BDF config: HW_XPA: 0 CalDB: 0 [ 29.720562][ T153] cnss: Qmi fail: respons with error:94 [ 29.726161][ T153] cnss: Qmi fail: request rejected, req 55, ret -1 [ 29.732761][ T153] cnss: pcss recovery setting failed with ret -1 chrony-sock.service: Scheduled restart job, restart counter is at 3. [ 29.739522][ T153] cnss: QMI_DMS_GET_MAC_ADDRESS_REQ_V01 failed, result: 1, err: 16 [ 29.781575][ T153] [kworke][0x27e74d57][00:00:05.271683] wlan: [153:I:HIF] hif_pci_enable_bus: con_mode = 0x0, WLAN_SOC_device_id = 0x1103 [ 29.794545][ T153] [kworke][0x27eb1a44][00:00:05.284656] wlan: [153:I:HIF] hif_pci_get_soc_info_pld: hif_pci_get_soc_info_pld: fam num 4 dev ver 12 maj ver 2 min ver 16 [ 29.794545][ T153] [ 29.812363][ T153] [kworke][0x27f0529d][00:00:05.302474] wlan: [153:I:HIF] hif_pci_enable_bus: hif_enable_pci done [ 29.823535][ T153] [kworke][0x27f39890][00:00:05.313646] wlan: [153:I:HIF] hif_get_device_type: *********** QCA6490 ************* [ 29.835720][ T153] [kworke][0x27f72a6a][00:00:05.325831] wlan: [153:I:HIF] hif_pci_enable_bus: hif_type = 0x16, target_type = 0x1b [ 29.847927][ T153] [kworke][0x27fabd85][00:00:05.338032] wlan: [153:I:HIF] hif_register_tbl_attach: HIF_TYPE_QCA6490 [ 29.858857][ T153] [kworke][0x27fdf157][00:00:05.348963] wlan: [153:I:HIF] hif_target_register_tbl_attach: TARGET_TYPE_QCA6490 [ 29.870684][ T153] [kworke][0x280167eb][00:00:05.360784] wlan: [153:I:HIF] hif_pci_enable_bus: Skip tgt_wake up for srng devices [ 29.883118][ T153] [kworke][0x28050d60][00:00:05.373230] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: v2: num_config 27 [ 29.895025][ T153] [kworke][0x280889f7][00:00:05.385131] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 0, val a3b034 [ 29.906756][ T153] [kworke][0x280bf9d4][00:00:05.396868] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 1, val a3b03c [ 29.918486][ T153] [kworke][0x280f699a][00:00:05.408593] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 2, val a3b044 [ 29.930208][ T153] [kworke][0x2812d917][00:00:05.420319] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 3, val a3b04c [ 29.941939][ T153] [kworke][0x281648ef][00:00:05.432051] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 4, val a3b064 chrony-sock.service: Main process exited, code=exited, status=234/n/a[ 29.953676][ T153] [kworke][0x2819b936][00:00:05.443788] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 5, val a3b028 [ 29.972685][ T153] [kworke][0x281f4ad6][00:00:05.462796] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 6, val a3b020 [ 29.984402][ T153] [kworke][0x2822b9a2][00:00:05.474513] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 7, val a3b07c [ 29.996298][ T153] [kworke][0x282635d4][00:00:05.486410] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 8, val a46000 [ 30.008019][ T153] [kworke][0x2829a481][00:00:05.498125] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 9, val a46008 chrony-sock.service: Failed with result 'exit-code'.[ 30.019736][ T153] [kworke][0x282d13b3][00:00:05.509848] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 10, val a46010 [ 30.037849][ T153] [kworke][0x28326224][00:00:05.527960] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 11, val a46018 [ 30.049814][ T153] [kworke][0x2835e382][00:00:05.539925] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 12, val a46034 [ 30.061622][ T153] [kworke][0x28395924][00:00:05.551734] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 13, val a370b0 [ 30.073432][ T153] [kworke][0x283cceeb][00:00:05.563544] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 14, val a37018 [ 30.085232][ T153] [kworke][0x284043e0][00:00:05.575343] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 15, val a370c4 [ 30.097041][ T153] [kworke][0x2843b997][00:00:05.587153] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 16, val a370cc [ 30.108845][ T153] [kworke][0x28472ee1][00:00:05.598957] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 17, val a370d4 [ 30.120653][ T153] [kworke][0x284aa471][00:00:05.610764] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 18, val a370dc [ 30.132452][ T153] [kworke][0x284e1967][00:00:05.622564] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 19, val a370e4 [ 30.144254][ T153] [kworke][0x28518e84][00:00:05.634365] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 20, val 1b80400 [ 30.156140][ T153] [kworke][0x285509f8][00:00:05.646251] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 21, val 1b83400 [ 30.168025][ T153] [kworke][0x2858855b][00:00:05.658136] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 22, val 1b8340c [ 30.179912][ T153] [kworke][0x285c00e1][00:00:05.670023] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 23, val 1b85400 [ 30.191811][ T153] [kworke][0x285f7d4d][00:00:05.681922] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 24, val 1b8540c [ 30.203710][ T153] [kworke][0x2862f9be][00:00:05.693822] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 25, val 1b86400 [ 30.215599][ T153] [kworke][0x28667573][00:00:05.705711] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 26, val 1b88400 [ 30.257383][ T153] [kworke][0x2872b339][00:00:05.747495] wlan: [153:I:HIF] hif_configure_irq: E [ 30.267230][ T153] wlan_pld:pld_is_ipa_offload_disabled:3344:: Not supported on type 0 [ 30.275607][ T153] [kworke][0x28780a0c][00:00:05.765719] wlan: [153:E:POLICY_MGR] policy_mgr_init_cfg: max_conc_cxns 3 non-nan [ 30.287674][ T153] [kworke][0x287b9312][00:00:05.777786] wlan: [153:E:QDF] __cds_get_context: Module ID 66 context is Null (via hdd_update_ol_config) [ 30.301555][ T153] [kworke][0x287fa426][00:00:05.791667] wlan: [153:E:HDD] hdd_wlan_start_modules: WBUFF init unsuccessful; status: 11 [ 30.317048][ T153] [kworke][0x28842e06][00:00:05.807159] wlan: [153:E:QDF] __cds_get_context: Module ID 66 context is Null (via cds_open) [ 30.330669][ T153] [kworke][0x28882b70][00:00:05.820778] wlan: [153:F:WMA] WMA --> wmi_unified_attach - success [ 30.345014][ T153] [kworke][0x288c5f56][00:00:05.835123] wlan: [153:E:QDF] htc_wait_target: Target Ready! TX resource : 1 size:2176, MaxMsgsPerHTCBundle = 1 [ 30.359500][ T153] [kworke][0x28909dfa][00:00:05.849611] wlan: [153:E:QDF] htc_setup_target_buffer_assignments: SVS Index : 1 TX : 0x100 : alloc:1 chrony-sock.service: Scheduled restart job, restart counter is at 4.[ 30.374747][ T153] [kworke][0x28951520][00:00:05.864854] wlan: [153:I:DP] dp_soc_tx_desc_sw_pools_alloc Tx Desc Alloc num_pool = 6, descs = 4096 [ 30.408177][ T153] [kworke][0x289ee0bf][00:00:05.898288] wlan: [153:I:scan] scm_channel_list_db_init: min_freq 5935 max_freq 7115 [ 30.420765][ T153] [kworke][0x28a290cb][00:00:05.910876] wlan: [153:I:DP] Peer pool init [ 30.446265][ T165] [kworke][0x28aa095a][00:00:05.936376] wlan: [165:I:WMA] wma_rx_service_ready_event: Firmware build version : 11488300 [ 30.459285][ T165] [kworke][0x28add9e3][00:00:05.949397] wlan: [165:I:WMA] wma_rx_service_ready_event: Board id: 0, Board version: 8 0 0 0 1 [ 30.474760][ T165] [kworke][0x28b26276][00:00:05.964871] wlan: [165:I:WMA] wma_is_dbs_mandatory: MAC0 does not support both bands 2 DBS is mandatory [ 30.488647][ T165] [kworke][0x28b673a6][00:00:05.978754] wlan: [165:I:WMI] extract_hw_bdf_status: BDF VER is 0, FW and BDF ver check skipped [ 30.501737][ T165] [kworke][0x28ba496e][00:00:05.991844] wlan: [165:E:TIF] init_deinit_populate_dbs_or_sbs_cap_ext2: Extraction of twt capability failed [ 30.515890][ T165] [kworke][0x28be6f40][00:00:06.006002] wlan: [165:I:WMA] wma_is_dbs_mandatory: MAC0 does not support both bands 2 DBS is mandatory chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. [ 30.799771][ T1524] [kworke][0x29119a48][00:00:06.289882] wlan: [1524:I:WMI] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 30.813669][ T1524] [kworke][0x2915acb2][00:00:06.303781] wlan: [1524:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_offload 1 [ 30.827818][ T1524] [kworke][0x2919d1c1][00:00:06.317929] wlan: [1524:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_bangradar_320_support 0 [ 30.843251][ T1524] [kworke][0x291e5745][00:00:06.333362] wlan: [1524:I:GREEN_AP] wlan_green_ap_pdev_obj_create_notification: Green AP creation successful, green ap ctx: 0000000000000000, pdev: 0000000000000000 [ 30.862751][ T1524] [kworke][0x29240dd2][00:00:06.352863] wlan: [1524:I:REGULATORY] reg_set_band: set band bitmap: 3 [ 30.873693][ T1524] [kworke][0x29274275][00:00:06.363804] wlan: [1524:I:HDD] hdd_intersect_igmp_offload_setting: fw cap to handle igmp 1 igmp_offload_enable ini 0 chrony-sock.service: Scheduled restart job, restart counter is at 5.[ 30.888918][ T1524] [kworke][0x292bb85d][00:00:06.379030] wlan: [1524:I:GREEN_AP] target_if_green_ap_register_egap_event_handler: Set the Enhance Green AP event handler chrony-sock.service: Start request repeated too quickly. chrony-sock.service: Failed with result 'exit-code'. [ 30.910203][ T153] [kworke][0x2931f4aa][00:00:06.400314] wlan: [153:I:WMA] wma_wait_for_ready_event: FW ready event received [ 30.935674][ T153] [kworke][0x29396b13][00:00:06.425786] wlan: [153:I:SYS] Creating periodic timer for OLBC UPDATE CACHE TIMEOUT [ 30.935674][ T153] [ 30.949999][ T153] [kworke][0x293d9d7d][00:00:06.440111] wlan: [153:E:DP] dp_rxdma_ring_config: pdev_id 0 max_mac_rings 2 [ 30.961808][ T153] [kworke][0x29411322][00:00:06.451920] wlan: [153:I:HAL] hal_reo_set_err_dst_remap_6490: HWIO_REO_R0_ERROR_DESTINATION_MAPPING_IX_0 0x55555 [ 30.976386][ T153] [kworke][0x29455872][00:00:06.466498] wlan: [153:I:HAL] hal_reo_set_err_dst_remap_6490: HWIO_REO_R0_ERROR_DESTINATION_MAPPING_IX_1 0x5555550 [ 30.991260][ T153] [kworke][0x2949b408][00:00:06.481372] wlan: [153:I:DIRECT_BUF_RX] target_if_direct_buf_rx_register_events: DBR Handler Context 1 [ 31.011222][ T153] [kworke][0x294f8d18][00:00:06.501333] wlan: [153:E:fwol] ucfg_fwol_send_get_thermal_stats_cmd: Command Disabled in Ini gThermalStatsTempOffset 5 or not enabled in FW 0 [ 31.028367][ T153] [kworke][0x29549300][00:00:06.518478] wlan: [153:E:OSIF] os_if_fwol_get_thermal_stats_req: Failed to send get thermal stats cmd to FW, 4 [ 31.043148][ T153] [kworke][0x2958e799][00:00:06.533260] wlan: [153:E:WMI] send_action_oui_cmd_tlv: Invalid action id [ 31.054169][ T153] [kworke][0x295c223e][00:00:06.544281] wlan: [153:E:WMI] send_action_oui_cmd_tlv: Invalid action id [ 31.065824][ T153] [kworke][0x295f8c40][00:00:06.555935] wlan: [153:I:HDD] hdd_initialize_mac_address: using default MAC address [ 31.080712][ T420] systemd-udevd[420]: Using default interface naming scheme 'v243'. [ 31.083811][ T427] systemd-udevd[427]: Using default interface naming scheme 'v243'. [ 31.085037][ T153] [kworke][0x29652d3e][00:00:06.575148] wlan: [153:I:HDD] hdd_psoc_idle_timer_start: psoc idle timer is disabled [ 31.109220][ T422] systemd-udevd[422]: Using default interface naming scheme 'v243'. [ 31.667249][ T2046] [ifconf][0x2a0fbf21][00:00:07.157360] wlan: [2046:I:DP] 00000000: 5b 92 94 6b b2 49 db d2 25 22 7c 9a b6 ae bc d7 [ 31.679642][ T2046] [ifconf][0x2a136096][00:00:07.169753] wlan: [2046:I:DP] 00000010: 1d 09 7a 74 [ 31.688836][ T2046] [ifconf][0x2a161235][00:00:07.178948] wlan: [2046:I:DP] 00000000: 09 87 40 55 03 2b b3 bc 58 77 a9 08 42 17 9b fa [ 31.701188][ T2046] [ifconf][0x2a19b094][00:00:07.191299] wlan: [2046:I:DP] 00000010: ae 53 c6 85 9a b2 b9 07 19 57 50 58 62 79 d7 43 [ 31.713622][ T2046] [ifconf][0x2a1d551e][00:00:07.203733] wlan: [2046:I:DP] 00000020: 98 42 fd 52 02 42 30 2a 81 3b e3 1a [ 31.726444][ T2046] [ifconf][0x2a2116b4][00:00:07.216554] wlan: [2046:E:HDD] hdd_sysfs_bmiss_create: could not create bmiss sysfs file [ 36.799354][ T2051] [hostap][0x2fef4b01][00:00:12.289465] wlan: [2051:E:HDD] __hdd_stop_tsf_sync: Host Target sync has not initialized [ 36.812415][ T2013] [schedu][0x2ff31e9f][00:00:12.302527] wlan: [2013:E:DP] dp_rx_flush_rx_cached: txrx_peer NULL!! peer mac_addr(00:03:7f:12:e8:83) [ 36.826148][ T2013] [schedu][0x2ff72497][00:00:12.316259] wlan: [2013:E:DP] dp_tx_flow_pool_unmap_handler: flow pool id: 0 is inactive, ignore unmap [ 36.858600][ T2013] [schedu][0x3000a67a][00:00:12.348711] wlan: [2013:I:WMA] wma_vdev_detach_callback: vdev del response received for VDEV_0 [ 36.872189][ T2051] [hostap][0x3004a1ab][00:00:12.362300] wlan: [2051:E:REGULATORY] reg_run_11d_state_machine: Invalid vdev [ 36.930247][ T2013] [schedu][0x3015a3f8][00:00:12.420358] wlan: [2013:I:OSIF] scan start scan id 40961 [ 37.065164][ T2013] [schedu][0x303d2abd][00:00:12.555275] wlan: [2013:I:OSIF] vdev 0, scan id 40961 type COMPLETED(1) reason COMPLETED(1) scan found 0 bss [ 37.213866][ T2052] [hostap][0x3068bb63][00:00:12.703977] wlan: [2052:I:HDD] wlan0(vdevid-0): START AP: mode SAP(1) 5745 bw 3 sub20 0 [ 37.231503][ T153] [kworke][0x306de62d][00:00:12.721614] wlan: [153:E:OSIF] osif_twt_disable_complete_cb: obsolete request [ 37.232295][ T2013] [schedu][0x306e21a7][00:00:12.722407] wlan: [2013:I:WMI] send_vdev_start_cmd_tlv: vdev_id 0 freq 5745 chanmode 18 ch_info: 0x12 is_dfs 0 beacon interval 100 dtim 2 center_chan 5775 center_freq2 0 reg_info_1: 0x1e0000 reg_info_2: 0x1e00, req->max_txpow: 0x1e Tx SS 2, Rx SS 2, ldpc_rx: 0, cac 0, regd 1, HE ops: 1056964876req->dis_hw_ack: 0 [ 37.243002][ T153] [kworke][0x3071449c][00:00:12.733113] wlan: [153:E:OSIF] osif_twt_disable_complete_cb: obsolete request [ 37.374800][ T2013] [schedu][0x3097e17a][00:00:12.864911] wlan: [2013:E:WMA] wma_sr_update: Spatial Reuse disabled for vdev_id: 0 [ 37.387350][ T2013] [schedu][0x309b8eb3][00:00:12.877461] wlan: [2013:I:HDD] AP started vid 0 freq 5745 BW 2 [ 37.397991][ T67] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.406036][ T2052] [hostap][0x30a1080c][00:00:12.896146] wlan: [2052:E:SAP] wlansap_is_6ghz_included_in_acs_range: NULL parameters [ 37.418435][ T1286] [kworke][0x30a4a9d0][00:00:12.908542] wlan: [1286:W:TWT] wlan_twt_responder_enable: twt responder ini is not enabled [ 37.424665][ T2013] [schedu][0x30a67cf5][00:00:12.914771] wlan: [2013:E:HDD] hdd_tsf_is_initialized: TSF is not initialized [ 37.431052][ T1286] [kworke][0x30a85c64][00:00:12.921164] wlan: [1286:W:OSIF] osif_twt_responder_enable: Failed to send TWT responder enable command [ 37.442495][ T2013] [schedu][0x30abb686][00:00:12.932605] wlan: [2013:E:HDD] hdd_get_tsf_cb: tsf is not init, ignore tsf event [ 41.907209][ T2058] bridge0: port 1(wlan0) entered blocking state [ 41.913551][ T2058] bridge0: port 1(wlan0) entered disabled state [ 41.920271][ T2058] device wlan0 entered promiscuous mode [ 41.926044][ T2058] bridge0: port 1(wlan0) entered blocking state [ 41.932364][ T2058] bridge0: port 1(wlan0) entered forwarding state [ 41.949481][ T2063] QCMAP: HW Address for dev wlan0: 00:03:7f:12:e8:83 [ 41.959003][ T2065] ++++ /etc/init.post_boot.sh -> Starting post boot settings [ 41.998782][ T2065] ++++ /etc/init.post_boot.sh -> Debug SA525M - START [ 42.005967][ T2065] ++++ /etc/init.post_boot.sh -> SA525M target specific debug file [ 42.014052][ T2065] ++++ /etc/init.post_boot.sh -> DCC-Enable START [ 42.081737][ T2065] msm-dcc 240ff000.dcc_v2: DCC list passed 7 [ 42.088694][ T2065] msm-dcc 240ff000.dcc_v2: All values written to enable. [ 42.096186][ T2065] ++++ /etc/init.post_boot.sh -> DCC-Enable END [ 42.119365][ T2065] ++++ /etc/init.post_boot.sh -> ENABLE-FTRACE START [ 42.126269][ T2065] ++++ /etc/init.post_boot.sh -> create_stp_policy START [ 42.150213][ T2065] ++++ /etc/init.post_boot.sh -> create_stp_policy END [ 42.171767][ T2065] ++++ /etc/init.post_boot.sh -> FTRACE-Enable END [ 42.178486][ T2065] ++++ /etc/init.post_boot.sh -> Debug SA525M - END [ 42.185691][ T2065] ++++ /etc/init.post_boot.sh -> post boot settings completed Startup finished in 8.740s (kernel) + 33.779s (userspace) = 42.519s. [ 47.651741][ T2013] [schedu][0x3c5ab34e][00:00:23.141843] wlan: [2013:E:QDF] qdf_mc_timer_start: Cannot start timer in state = 21 tx_main_timer_func [qca6490] [ 72.153357][ T67] android_work: sent uevent USB_STATE=DISCONNECTED [ 72.155039][ T565] dwc3 a600000.dwc3: request 0000000000000000 was not queued to ep0out [ 72.168573][ T565] dwc3 a600000.dwc3: request 0000000000000000 was not queued to ep0out adbd.service: Main process exited, code=exited, status=1/FAILURE adbd.service: Failed with result 'exit-code'. adbd.service: Scheduled restart job, restart counter is at 1. [ 72.458838][ T2101] Launch adb is starting adbd... [ 72.487992][ T2106] read descriptors [ 72.497042][ T2106] read strings [ 72.530412][ T2106] dwc3 a600000.dwc3: Set IRQ thread:irq/168-dwc3 pid:2108 to SCHED_NORMAL prio [ 72.655191][ T67] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 72.756643][ T67] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 72.810459][ T67] android_work: sent uevent USB_STATE=CONNECTED [ 72.855599][ T67] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 72.865709][ T67] android_work: sent uevent USB_STATE=CONFIGURED [ 73.451175][ T1524] [kworke][0x59e1212a][00:00:48.941281] wlan: [1524:E:REGULATORY] reg_run_11d_state_machine: Invalid vdev [ 73.520567][ T2101] Started adbd. [ 91.460190][ T2080] CPU-SKU: Invalid num CPUs. Forcing to 1 CPUs [ 91.557641][ T2080] psci: CPU1 killed (polled 0 ms) [ 91.685481][ T2080] psci: CPU2 killed (polled 0 ms) [ 91.825718][ T2080] psci: CPU3 killed (polled 0 ms) [ 160.910938][ T1558] prm_gpr_send_pkt: apm ready check not done [ 161.020621][ T1558] spf-core-platform soc:spf_core_platform: __spf_core_is_apm_ready: send_command ret [ 161.041637][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: Payload 2001007 [ 161.050070][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: sucess response received [ 161.060051][ T1558] prm_gpr_send_pkt: apm ready check done [ 161.077215][ T1558] tlv320aic32x4 6-0018: Could not set clocks to support sample rate. [ 324.725601][ T1558] tlv320aic32x4 6-0018: Could not set clocks to support sample rate.