ChipId = 0x22Fusb_repeater_init, tuning_allowed: 1 WRITING: reg: 0xFD51, data: 9, res = 0 WRITING: reg: 0xFD54, data: 3, res = 0 WRITING: reg: 0xFD57, data: 2, res = 0 UsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLib_pmic_npa_create_sync_client: USB (/mccin/s_sUsbConfigLibOpenProtocols: PMI version (0x51) UsbConfigIsAutoChipinfoID: UsbConfigIsAutoChipinfoID: ChipId = 0x22F ButtonsDxeTest: Keypress SDAM data payload 0 GetBootSet : ImageSet to Boot: 0x0 WaitParallelThreads InIt [ 2808] Var Store : WARNING, not persistent UEFI Ver : 6.0.240421.BOOT.MXF.2.3-00354-PINNACLES-1 Platform : IDP Subtype : 0 Boot Device : Nand Chip Name : SA_PINNACLES_L Chip Ver : 1.0 Chip ECID : 0x0443F2A70361 ----------------------------- LaunchAppFromGuidedFv: Load image from guided FV failed, Not Found Failed to launch default charger app, status: Not Found UEFI Total : 456 ms POST Time [ 2820] OS Loader [2826]Loader Build Info: Apr 23 2024 02:47:14 VB: Non-secure device: Security State: (0xFDF3F) VB: RWDeviceState: Succeed using devinfo! GetBootSet : ImageSet to Boot: 0x0 [2846]Total DDR Size: 0x000000003EE28000 [2846]KeyPress:0, BootReason:0 [2846]Fastboot=0, Recovery:0 [2846]SilentBoot Mode:11 [2847]Booting Into Mission Mode [2860]Loading Image boot Done : 12 ms, Image size : 4096 Bytes [4559]Loading Image boot Done : 1700 ms, Image size : 30441472 Bytes [4575]Loading Image dtbo Done : 15 ms, Image size : 262144 Bytes VB: DeviceInit: Device is unlocked! Skipping verification! [4611]VB: LoadImageAndAuthForLE complete! GetBootSet : ImageSet to Boot: 0x0 LoadImageFromPartitionUsingGuid Failed: 14 Keymaster failed to load! Status = 0xE LoadSecureApps: Load app from partition(keymaster): Status = 0x0, AppId = 1 QseeResponse->result = 0xFFFFFFFF Status = 0x7 [4704]KeyMasterSetRotForLE success [4704]Hyp version: 1 [4704]Silent Mode value: 11 [4705]Memory Base Address: 0x80000000 [4717]Override DTB: GetBlkIOHandles failed loading user_dtbo! [4800]Apply Overlay total time: 83 ms tz_armv8_smc_call failed, TzStatus = 0xFFFFFFFF, SmcId = 0x2001901 [4800]ScmSipSysCall() failed, Status = (0x3) [4802]Unknown Boot Device type detected [4802]Failed to get Boot Device: Not Found [4802]Unable to get Panel Config, Not Found [4802]Unable to get hw fence Config, Not Found [4802]Unable to get GPU Preempt Config, Not Found [4802]Offlining Memory Not Supported [4803]Loading Image emac Done : 1 ms, Image size : 4096 Bytes [4803]Cmdline: ro rootwait console=ttyMSM0,115200,n8 no_console_suspend=1 androidboot.console=ttyMSM0 lpm_levels.sleep_disabled=1 firmware_class.path=/lib/firmware/updates,/vm-bootsys/boot service_locator.enable=1 net.ifnames=0 root=/dev/ram rootfstype=ramfs in[4806]Final RAM Partitions [4806]Add Base: 0x0000000081400000 Available Length: 0x00000000000E0000 [4806]Add Base: 0x0000000082180000 Available Length: 0x0000000005880000 [4807]Add Base: 0x0000000087BC0000 Available Length: 0x0000000000040000 [4807]Add Base: 0x0000000087D90000 Available Length: 0x0000000000070000 [4807]Add Base: 0x0000000087F85000 Available Length: 0x000000000057B000 [4807]Add Base: 0x000000009DD00000 Available Length: 0x0000000002300000 [4807]Add Base: 0x00000000A0000000 Available Length: 0x000000001EE00000 [4807]Add Base: 0x00000000BEFC0000 Available Length: 0x0000000000E40000 [4807]Add Base: 0x0000000080600000 Available Length: 0x0000000000D80000 [4817]Unable to get splash buffer info, Not Found [4818]Unable to get splash buffer info, Not Found [4822]PartialGoods Value: 0x0 [4822]Update Device Tree total time: 16 ms [4822] Shutting Down UEFI Boot Services: 4822 ms Start EBS [ 4822] BDS: LogFs sync skipped, No Media App Log Flush : 124 ms ScmArmV8ExitBootServicesHandler, Status = 0x0. ExitBootServicesScmDxeV8EventHandler TZ SMC call t=128ms Exit EBS [ 4958] UEFI End [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000][ T0] Linux version 5.15.104-debug-g6812784dff8f-dirty (build-user@build-host) (Android (8508608, based on r450784e) clang version 14.0.7 (https://android.googlesource.com/toolchain/llvm-project 4c603efb0cca074e9238af8b4106c30add4418f6), LLD 14.0.7) #1 SMP PREEMPT Sun Apr 21 14:26:25 UTC 2024 [ 0.000000][ T0] Machine model: Qualcomm Technologies, Inc. SA522 IDP Overlay [ 0.000000][ T0] efi: UEFI not found. [ 0.000000][ T0] OF: reserved mem: 0x00000000bfc00000..0x00000000bfdfffff (2048 KiB) map non-reusable ramoops_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bd800000, size 20 MiB [ 0.000000][ T0] OF: reserved mem: initialized node cnss_wlan_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bd800000..0x00000000bebfffff (20480 KiB) map reusable cnss_wlan_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bf400000, size 8 MiB [ 0.000000][ T0] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bf400000..0x00000000bfbfffff (8192 KiB) map reusable qseecom_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bb800000, size 32 MiB [ 0.000000][ T0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bb800000..0x00000000bd7fffff (32768 KiB) map reusable linux,cma [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bf000000, size 4 MiB [ 0.000000][ T0] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bf000000..0x00000000bf3fffff (4096 KiB) map reusable qseecom_ta_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000bb000000, size 8 MiB [ 0.000000][ T0] OF: reserved mem: initialized node mem_dump_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000bb000000..0x00000000bb7fffff (8192 KiB) map reusable mem_dump_region [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000ba000000, size 16 MiB [ 0.000000][ T0] OF: reserved mem: initialized node va_md_mem_region, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x00000000ba000000..0x00000000baffffff (16384 KiB) map reusable va_md_mem_region [ 0.000000][ T0] OF: reserved mem: 0x0000000015800000..0x0000000015ffffff (8192 KiB) nomap non-reusable llcc_tcm_region@15800000 [ 0.000000][ T0] OF: reserved mem: 0x0000000080000000..0x00000000805fffff (6144 KiB) nomap non-reusable gunyah_hyp_region@80000000 [ 0.000000][ T0] OF: reserved mem: 0x0000000081380000..0x00000000813fffff (512 KiB) nomap non-reusable access_control_db_region@81380000 [ 0.000000][ T0] OF: reserved mem: 0x00000000814e0000..0x000000008177ffff (2688 KiB) nomap non-reusable qteetz_region@814e0000 [ 0.000000][ T0] OF: reserved mem: 0x0000000081780000..0x000000008217ffff (10240 KiB) nomap non-reusable trusted_apps_region@81780000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087a00000..0x0000000087bbffff (1792 KiB) nomap non-reusable xbl_ramdump_region@87a00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087c00000..0x0000000087cfffff (1024 KiB) nomap non-reusable cpucp_fw_region@87c00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d00000..0x0000000087d3ffff (256 KiB) nomap non-reusable xbl_dtlog_region@87d00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d40000..0x0000000087d7ffff (256 KiB) nomap non-reusable xbl_sc_region@87d40000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087d80000..0x0000000087d8ffff (64 KiB) nomap non-reusable modem_efs_shared_region@87d80000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087e00000..0x0000000087e1ffff (128 KiB) nomap non-reusable aop_image_region@87e00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087e20000..0x0000000087edffff (768 KiB) nomap non-reusable smem_region@87e20000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087ee0000..0x0000000087efffff (128 KiB) nomap non-reusable aop_cmd_db_region@87ee0000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f00000..0x0000000087f1ffff (128 KiB) nomap non-reusable aop_config_region@87f00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f20000..0x0000000087f2ffff (64 KiB) nomap non-reusable ipa_fw_region@87f20000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f30000..0x0000000087f30fff (4 KiB) nomap non-reusable secdata_region@87f30000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f31000..0x0000000087f70fff (256 KiB) nomap non-reusable tme_crashdump_region@87f31000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f71000..0x0000000087f74fff (16 KiB) nomap non-reusable tme_log_region@87f71000 [ 0.000000][ T0] OF: reserved mem: 0x0000000087f75000..0x0000000087f84fff (64 KiB) nomap non-reusable uefi_log@87f75000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088500000..0x00000000887fffff (3072 KiB) nomap non-reusable qdss_region@88500000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088800000..0x0000000088afffff (3072 KiB) nomap non-reusable qlink_logging@88800000 [ 0.000000][ T0] Reserved memory: created DMA memory pool at 0x0000000088b00000, size 4 MiB [ 0.000000][ T0] OF: reserved mem: initialized node audio_heap_region@88b00000, compatible id shared-dma-pool [ 0.000000][ T0] OF: reserved mem: 0x0000000088b00000..0x0000000088efffff (4096 KiB) nomap non-reusable audio_heap_region@88b00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000088f00000..0x00000000896fffff (8192 KiB) nomap non-reusable mpss_dsmharq2_region@88f00000 [ 0.000000][ T0] OF: reserved mem: 0x0000000089700000..0x000000008df7ffff (74240 KiB) nomap non-reusable mpss_dsmharq_region@89700000 [ 0.000000][ T0] OF: reserved mem: 0x000000008df80000..0x000000008dffffff (512 KiB) nomap non-reusable q6_mpss_dtb_region@8df80000 [ 0.000000][ T0] OF: reserved mem: 0x000000008e000000..0x000000009dcfffff (259072 KiB) nomap non-reusable mpssadsp_region@8e000000 [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] DMA [mem 0x0000000080600000-0x00000000bfdfffff] [ 0.000000][ T0] DMA32 empty [ 0.000000][ T0] Normal empty [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000080600000-0x000000008137ffff] [ 0.000000][ T0] node 0: [mem 0x0000000081400000-0x00000000814dffff] [ 0.000000][ T0] node 0: [mem 0x0000000082180000-0x00000000879fffff] [ 0.000000][ T0] node 0: [mem 0x0000000087bc0000-0x0000000087bfffff] [ 0.000000][ T0] node 0: [mem 0x0000000087d90000-0x0000000087dfffff] [ 0.000000][ T0] node 0: [mem 0x0000000087f85000-0x00000000884fffff] [ 0.000000][ T0] node 0: [mem 0x000000009dd00000-0x00000000bedfffff] [ 0.000000][ T0] node 0: [mem 0x00000000befc0000-0x00000000bfdfffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000080600000-0x00000000bfdfffff] [ 0.000000][ T0] On node 0, zone DMA: 1536 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 3232 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 448 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 400 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 389 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 55296 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 448 pages in unavailable ranges [ 0.000000][ T0] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000][ T0] psci: probing for conduit method from DT. [ 0.000000][ T0] psci: PSCIv1.1 detected in firmware. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs [ 0.000000][ T0] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000][ T0] psci: SMC Calling Convention v1.3 [ 0.000000][ T0] psci: OSI mode supported. [ 0.000000][ T0] percpu: Embedded 28 pages/cpu s77608 r8192 d28888 u114688 [ 0.000000][ T0] Detected VIPT I-cache on CPU0 [ 0.000000][ T0] CPU features: detected: GIC system register CPU interface [ 0.000000][ T0] CPU features: kernel page table isolation forced OFF by kpti command line option [ 0.000000][ T0] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 164377 [ 0.000000][ T0] Kernel command line: disable_dma32=on swiotlb=noforce kpti=off cpufreq.default_governor=performance pcie_ports=compat msm_rtb.filter=0x237 ftrace_dump_on_oops selinux=0 ro rootwait console=ttyMSM0,115200,n8 no_console_suspend=1 androidboot.console=ttyMSM0 lpm_levels.sleep_disabled=1 firmware_class.path=/lib/firmware/updates,/vm-bootsys/boot service_locator.enable=1 net.ifnames=0 root=/dev/ram rootfstype=ramfs init=/sbin/init androidboot.serialno=f2a70361 androidboot.baseband=msm part.activeboot=boot systemd.setenv="SLOT_SUFFIX=_a" eipv4= eipv6= ermac= ephyaddr= eiface= espeed= silent_boot.mode=nonsilent [ 0.000000][ T0] qcom-ethqos set_early_ethernet_ipv4:499 Invalid ipv4 address programmed: [ 0.000000][ T0] qcom-ethqos set_early_ethernet_ipv6:524 Invalid ipv6 address programmed: [ 0.000000][ T0] qcom-ethqos set_early_ethernet_mac:552 Invalid Mac address programmed: [ 0.000000][ T0] qcom-ethqos set_ethernet_phyaddr:567 Invalid phy addr programmed: [ 0.000000][ T0] qcom-ethqos set_ethernet_speed:619 Invalid link speed programmed: 0 [ 0.000000][ T0] Unknown kernel command line parameters "eipv4= eipv6=", will be passed to user space. [ 0.000000][ T0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000][ T0] Memory: 520516K/667948K available (15168K kernel code, 2442K rwdata, 4648K rodata, 768K init, 6708K bss, 57320K reserved, 90112K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000][ T0] kmemleak: Kernel memory leak detector disabled [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] rcu: RCU event tracing is enabled. [ 0.000000][ T0] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Rude variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000][ T0] GICv3: 988 SPIs implemented [ 0.000000][ T0] GICv3: 0 Extended SPIs implemented [ 0.000000][ T0] GICv3: Distributor has no Range Selector support [ 0.000000][ T0] Root IRQ handler: gic_handle_irq [ 0.000000][ T0] GICv3: 16 PPIs implemented [ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000017260000 [ 0.000000][ T0] rcu: Offload RCU callbacks from CPUs: (none). [ 0.000000][ T0] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000][ T0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000731][ T0] random: crng init done [ 0.000900][ T0] Console: colour dummy device 80x25 [ 0.000941][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800) [ 0.000952][ T0] pid_max: default: 32768 minimum: 301 [ 0.001025][ T0] LSM: Security Framework initializing [ 0.001098][ T0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001111][ T0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002715][ T1] rcu: Hierarchical SRCU implementation. [ 0.003015][ T1] Kprobe smoke test: started [ 0.012781][ T1] Kprobe smoke test: passed successfully [ 0.014325][ T1] EFI services will not be available. [ 0.014667][ T1] smp: Bringing up secondary CPUs ... [ 0.015322][ T0] Detected VIPT I-cache on CPU1 [ 0.015358][ T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000017280000 [ 0.015441][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.016343][ T0] Detected VIPT I-cache on CPU2 [ 0.016372][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000172a0000 [ 0.016439][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.017234][ T0] Detected VIPT I-cache on CPU3 [ 0.017259][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000172c0000 [ 0.017320][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.017406][ T1] smp: Brought up 1 node, 4 CPUs [ 0.017436][ T1] SMP: Total of 4 processors activated. [ 0.017441][ T1] CPU features: detected: 32-bit EL0 Support [ 0.017446][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.017451][ T1] CPU features: detected: Common not Private translations [ 0.017455][ T1] CPU features: detected: CRC32 instructions [ 0.017461][ T1] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.017465][ T1] CPU features: detected: LSE atomic instructions [ 0.017469][ T1] CPU features: detected: Privileged Access Never [ 0.017473][ T1] CPU features: detected: RAS Extension Support [ 0.017478][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.097931][ T1] CPU: All CPU(s) started at EL1 [ 0.097983][ T16] alternatives: patching kernel code [ 0.099452][ T1] devtmpfs: initialized [ 0.128864][ T1] KASLR enabled [ 0.129068][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.129085][ T1] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.130210][ T1] pinctrl core: initialized pinctrl subsystem [ 0.130775][ T1] DMI not present or invalid. [ 0.131197][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.132595][ T1] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.132700][ T1] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.132760][ T1] audit: initializing netlink subsys (disabled) [ 0.132895][ T39] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1 [ 0.133285][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.138000][ T1] cpuidle: using governor menu [ 0.138673][ T1] NET: Registered PF_QIPCRTR protocol family [ 0.139154][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.139268][ T1] ASID allocator initialised with 65536 entries [ 0.141969][ T1] qcom-scm: __get_convention: qcom_scm: convention: smc arm 64 [ 0.142275][ T1] qcom-scm: qcom_scm_query_wq_queue_info: WQ Info, feature: 1 call_ctx_cnt: 2 irq: 962 [ 0.142488][ T1] qtee shmbridge registered default bridge with size 4194304 bytes [ 0.144341][ T1] shmbridge is enabled [ 0.144467][ T1] qcom-scm: scm_mem_protection_init_do: SCM call failed -5, resp 0 [ 0.144475][ T1] MEM protection Not enabled, -5 [ 0.172884][ T1] CPUidle PSCI: Initialized CPU PM domain topology [ 0.186028][ T1] rpmh_regulator_probe: smpk1: could not find RPMh address for resource [ 0.187655][ T1] qcom-memlat soc:qcom,memlat: Failure to probe memlat device: -517 [ 0.193784][ T1] gcc-sdxpinn 80000.clock-controller: Registered GCC clocks [ 0.206379][ T1] msm_sps_probe: sps:sps is ready [ 0.207424][ T1] qnoc-sdxpinn soc:interconnect@0: Registered SDXPINN ICC [ 0.207986][ T1] qnoc-sdxpinn soc:interconnect@1: Registered SDXPINN ICC [ 0.208255][ T1] qnoc-sdxpinn 190e0000.interconnect: Registered SDXPINN ICC [ 0.208878][ T1] qnoc-sdxpinn 19100000.interconnect: Registered SDXPINN ICC [ 0.209264][ T1] qnoc-sdxpinn 16c0000.interconnect: Registered SDXPINN ICC [ 0.210274][ T1] qnoc-sdxpinn 1640000.interconnect: Registered SDXPINN ICC [ 0.215498][ T1] amba 24d22000.funnel: Fixing up cyclic dependency with 24d20000.tpdm [ 0.215976][ T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d0a000.funnel [ 0.216022][ T1] amba 24d03000.funnel: Fixing up cyclic dependency with 24d22000.funnel [ 0.216285][ T1] amba 2480d000.funnel: Fixing up cyclic dependency with soc:modem_etm0 [ 0.216583][ T1] amba 2480c000.funnel: Fixing up cyclic dependency with soc:modem_diag [ 0.216626][ T1] amba 2480c000.funnel: Fixing up cyclic dependency with 2480d000.funnel [ 0.216947][ T1] amba 24804000.funnel: Fixing up cyclic dependency with 2480c000.funnel [ 0.216992][ T1] amba 24804000.funnel: Fixing up cyclic dependency with soc:modem2_etm0 [ 0.217289][ T1] amba 24803000.tpda: Fixing up cyclic dependency with 24804000.funnel [ 0.217332][ T1] amba 24803000.tpda: Fixing up cyclic dependency with 24800000.tpdm [ 0.217585][ T1] amba 2480e000.tpda: Fixing up cyclic dependency with 2480c000.funnel [ 0.217886][ T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc1000.tpdm [ 0.217933][ T1] amba 24cc4000.tpda: Fixing up cyclic dependency with 24cc0000.tpdm [ 0.218200][ T1] amba 24cc5000.funnel: Fixing up cyclic dependency with 24cc4000.tpda [ 0.218490][ T1] amba 26863000.tpda: Fixing up cyclic dependency with 26860000.tpdm [ 0.218537][ T1] amba 26863000.tpda: Fixing up cyclic dependency with 268a0000.tpdm [ 0.220045][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26863000.tpda [ 0.220093][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26340000.etm3 [ 0.220135][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26240000.etm2 [ 0.220187][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26140000.etm1 [ 0.220229][ T1] amba 26810000.funnel: Fixing up cyclic dependency with 26040000.etm0 [ 0.220716][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c29000.tpdm [ 0.220762][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c28000.tpdm [ 0.220833][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24c00000.tpdm [ 0.220878][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24840000.tpdm [ 0.220922][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24854000.tpdm [ 0.220968][ T1] amba 24c2b000.tpda: Fixing up cyclic dependency with 24d03000.funnel [ 0.221299][ T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24d03000.funnel [ 0.221344][ T1] amba 24c2c000.funnel: Fixing up cyclic dependency with 24c2b000.tpda [ 0.221644][ T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d0a000.funnel [ 0.221695][ T1] amba 24d09000.tpda: Fixing up cyclic dependency with 24d40000.tpdm [ 0.221985][ T1] amba 24004000.tpda: Fixing up cyclic dependency with 24003000.tpdm [ 0.222028][ T1] amba 24004000.tpda: Fixing up cyclic dependency with 2400f000.tpdm [ 0.222366][ T1] amba 24041000.funnel: Fixing up cyclic dependency with 24002000.stm [ 0.222409][ T1] amba 24041000.funnel: Fixing up cyclic dependency with 24004000.tpda [ 0.222458][ T1] amba 24041000.funnel: Fixing up cyclic dependency with soc:snoc [ 0.222843][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24c2c000.funnel [ 0.222891][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 26810000.funnel [ 0.222937][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24804000.funnel [ 0.222987][ T1] amba 24042000.funnel: Fixing up cyclic dependency with 24cc5000.funnel [ 0.223282][ T1] amba 24045000.funnel: Fixing up cyclic dependency with 24041000.funnel [ 0.223329][ T1] amba 24045000.funnel: Fixing up cyclic dependency with 24042000.funnel [ 0.223748][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0d000.tpdm [ 0.223796][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0b000.tpdm [ 0.223841][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0c000.tpdm [ 0.223891][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b09000.tpdm [ 0.223933][ T1] amba 24b08000.tpda: Fixing up cyclic dependency with 24b0a000.tpdm [ 0.224241][ T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24b08000.tpda [ 0.224289][ T1] amba 24b04000.funnel: Fixing up cyclic dependency with 24045000.funnel [ 0.224699][ T1] amba 24b05000.tmc: Fixing up cyclic dependency with 24b04000.funnel [ 0.225013][ T1] amba 24b06000.replicator: Fixing up cyclic dependency with soc:dummy_sink [ 0.225058][ T1] amba 24b06000.replicator: Fixing up cyclic dependency with 24b05000.tmc [ 0.225312][ T1] amba 24046000.replicator: Fixing up cyclic dependency with 24b06000.replicator [ 0.225568][ T1] amba 2404e000.replicator: Fixing up cyclic dependency with 24046000.replicator [ 0.225779][ T1] platform soc:dummy_replicator: Fixing up cyclic dependency with 2404e000.replicator [ 0.225992][ T1] platform soc:tmc_modem: Fixing up cyclic dependency with soc:dummy_replicator [ 0.226337][ T1] amba 24048000.tmc: Fixing up cyclic dependency with 2404e000.replicator [ 0.226618][ T1] amba 2404f000.tmc: Fixing up cyclic dependency with soc:dummy_replicator [ 0.239455][ T1] qcom_dma_iommu soc:dma_dev: assigned reserved memory node linux,cma [ 0.239660][ T1] DMA preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.242062][ T1] sdc1_emmc_sd_vdd: supplied by regulator-dummy [ 0.253371][ T1] gh-watchdog hypervisor:qcom,gh-watchdog: QCOM Apps Watchdog Initialized [ 0.253389][ T1] Minidump: Minidump driver hasn't probe, add region to pending list [ 0.260419][ T1] gcc_emac0_gdsc: supplied by pmx75_s5_level [ 0.260763][ T1] gcc_emac1_gdsc: supplied by pmx75_s5_level [ 0.261106][ T1] gcc_pcie_2_gdsc: supplied by pmx75_s5_level [ 0.261416][ T1] gcc_pcie_2_phy_gdsc: supplied by pmx75_l17_level [ 0.261726][ T1] gcc_pcie_gdsc: supplied by pmx75_l17_level [ 0.262029][ T1] gcc_pcie_phy_gdsc: supplied by pmx75_l17_level [ 0.262339][ T1] gcc_usb30_gdsc: supplied by pmx75_l17_level [ 0.262644][ T1] gcc_usb3_phy_gdsc: supplied by pmx75_s5_level [ 0.263860][ T1] Minidump: Enabled with max number of regions 200 [ 0.265686][ T1] qsmmuv500-tbu 1680000.anoc_1_qtb: Unable to get the transactiontracker-base [ 0.265930][ T1] qsmmuv500-tbu 1688000.ipa_qtb: Unable to get the transactiontracker-base [ 0.266159][ T1] qsmmuv500-tbu 16d0000.pcie_qtb: Unable to get the transactiontracker-base [ 0.266551][ T1] arm-smmu 15000000.apps-smmu: probing hardware configuration... [ 0.266559][ T1] arm-smmu 15000000.apps-smmu: SMMUv2 with: [ 0.266582][ T1] arm-smmu 15000000.apps-smmu: stage 1 translation [ 0.266588][ T1] arm-smmu 15000000.apps-smmu: coherent table walk [ 0.266594][ T1] arm-smmu 15000000.apps-smmu: stream matching with 57 register groups [ 0.266606][ T1] arm-smmu 15000000.apps-smmu: 24 context banks (0 stage-2 only) [ 0.266632][ T1] arm-smmu 15000000.apps-smmu: Supported page sizes: 0x61311000 [ 0.266639][ T1] arm-smmu 15000000.apps-smmu: Stage-1: 36-bit VA -> 42-bit IPA [ 0.268069][ T1] iommu: Default domain type: Translated [ 0.268077][ T1] iommu: DMA domain TLB invalidation policy: strict mode [ 0.268215][ T1] vgaarb: loaded [ 0.268480][ T1] SCSI subsystem initialized [ 0.268621][ T1] usbcore: registered new interface driver usbfs [ 0.268656][ T1] usbcore: registered new interface driver hub [ 0.268686][ T1] usbcore: registered new device driver usb [ 0.269229][ T1] pps_core: LinuxPPS API ver. 1 registered [ 0.269235][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.269248][ T1] PTP clock support registered [ 0.269876][ T1] IPA framework init [ 0.271430][ T1] Advanced Linux Sound Architecture Driver Initialized. [ 0.271922][ T1] pcie:pcie_init. [ 0.272976][ T1] clocksource: Switched to clocksource arch_sys_counter [ 0.309546][ T1] sdxpinn-debugcc soc:clock-controller@0: Registered debug measure clocks [ 0.317088][ T1] qcom_dload_probe: Current dump mode: 0x10 [ 0.317931][ T1] NET: Registered PF_INET protocol family [ 0.318027][ T1] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.318609][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.318632][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.318643][ T1] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.318725][ T1] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.318860][ T1] TCP: Hash tables configured (established 8192 bind 8192) [ 0.318949][ T1] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.318993][ T1] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.319154][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.319583][ T1] PCI: CLS 0 bytes, default 64 [ 0.319948][ T41] Trying to unpack rootfs image as initramfs... [ 0.329777][ T1] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.343835][ T1] Initialise system trusted keyrings [ 0.344097][ T1] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.349696][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.370260][ T1] Key type asymmetric registered [ 0.370283][ T1] Asymmetric key parser 'x509' registered [ 0.370384][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.370392][ T1] io scheduler mq-deadline registered [ 0.370399][ T1] io scheduler kyber registered [ 0.377077][ T1] gpi_dma 900000.qcom,gpi-dma: Adding to iommu group 0 [ 0.380721][ T1] geni_se_qup 9c0000.qcom,qupv3_0_geni_se: Adding to iommu group 1 [ 0.401757][ T1] v0.19, id=559, ver=1.0, raw_id=505, raw_ver=0, hw_plat=34, hw_plat_ver=65536 [ 0.401757][ T1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65610, pmic_die_revision=131073 foundry_id=1 serial_number=4071031649 num_pmics=2 chip_family=0x89 raw_device_family=0xa raw_device_number=0xb nproduct_id=0x443 num_clusters=0x1 ncluster_array_offset=0xd8 num_subset_parts=0xf nsubset_parts_array_offset=0xdc nmodem_supported=0xffffffff feature_code=0x0 pcode=0x0 sku=SA522M-0-(null) hw_plat_oem_variant=0 num_kvps=0 kvps_offset=296 num_func_clusters=0 boot_cluster=0 boot_core=0 [ 0.404436][ T1] ff0000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 141, base_baud = 0) is a EUD UART [ 0.405299][ T1] msm_mem_dump soc:mem_dump: assigned reserved memory node mem_dump_region [ 0.408190][ T1] MSM Memory Dump apps data table set up [ 0.409124][ T1] msm-dcc 240ff000.dcc_v2: ll-reg-offsets property doesn't exist [ 0.417902][ T1] mpm_hr_counter: can't find DT node [ 0.418069][ T1] KPI: Bootloader start count = 92677 [ 0.418080][ T1] KPI: Bootloader end count = 163223 [ 0.418087][ T1] KPI: Bootloader load kernel count = 55681 [ 0.418095][ T1] KPI: Kernel MPM timestamp = 180246 [ 0.418099][ T1] KPI: Kernel MPM Clock frequency = 32768 [ 0.418411][ T1] msm_hang_detect_probe: Missing cluster-id. [ 0.418419][ T1] msm_hang_detect_probe: Failed to get qcom,chd-percpu-info DT property [ 0.418424][ T1] msm_hang_detect: probe of soc:qcom,chd failed with error -22 [ 0.420851][ T1] msm_serial: driver initialized [ 0.423818][ T18] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.424534][ T1] brd: module loaded [ 0.429828][ T1] loop: module loaded [ 0.430161][ T1] zram: Added device: zram0 [ 0.430437][ T1] lkdtm: No crash points registered, enable through debugfs [ 0.431634][ T1] qcom_system_heap_create: DMA-BUF Heap: Created 'qcom,system' [ 0.431660][ T1] sysfs: cannot create duplicate filename '/devices/virtual/dma_heap/system' [ 0.431668][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.104-debug-g6812784dff8f-dirty #1 [ 0.431676][ T1] Hardware name: Qualcomm Technologies, Inc. SA522 IDP Overlay (DT) [ 0.431682][ T1] Call trace: [ 0.431685][ T1] dump_backtrace+0x0/0x214 [ 0.431699][ T1] show_stack+0x18/0x24 [ 0.431707][ T1] dump_stack_lvl+0x64/0x7c [ 0.431715][ T1] dump_stack+0x18/0x38 [ 0.431721][ T1] sysfs_create_dir_ns+0xe8/0x144 [ 0.431729][ T1] kobject_add_internal+0x168/0x3c4 [ 0.431738][ T1] kobject_add+0x94/0x100 [ 0.431744][ T1] device_add+0x17c/0x608 [ 0.431752][ T1] device_create_groups_vargs+0xcc/0x128 [ 0.431759][ T1] device_create+0x58/0x80 [ 0.431766][ T1] dma_heap_add+0x11c/0x2ac [ 0.431774][ T1] qcom_system_heap_create+0x24c/0x2a0 [ 0.431781][ T1] qcom_dma_heap_probe+0x3c/0x1cc [ 0.431787][ T1] platform_probe+0xa8/0xd0 [ 0.431794][ T1] call_driver_probe+0x38/0x110 [ 0.431801][ T1] really_probe+0xc4/0x34c [ 0.431807][ T1] __driver_probe_device+0x114/0x17c [ 0.431813][ T1] driver_probe_device+0x48/0x1a0 [ 0.431819][ T1] __driver_attach+0x100/0x23c [ 0.431825][ T1] bus_for_each_dev+0x80/0xcc [ 0.431832][ T1] driver_attach+0x24/0x30 [ 0.431837][ T1] bus_add_driver+0x110/0x220 [ 0.431843][ T1] driver_register+0x78/0x110 [ 0.431849][ T1] __platform_driver_register+0x24/0x30 [ 0.431855][ T1] init_heap_driver+0x1c/0x28 [ 0.431864][ T1] do_one_initcall+0xb4/0x2e4 [ 0.431870][ T1] do_initcall_level+0xa4/0x14c [ 0.431877][ T1] do_initcalls+0x54/0x94 [ 0.431883][ T1] do_basic_setup+0x1c/0x28 [ 0.431889][ T1] kernel_init_freeable+0xe0/0x158 [ 0.431895][ T1] kernel_init+0x20/0x1a0 [ 0.431902][ T1] ret_from_fork+0x10/0x20 [ 0.431910][ T1] kobject_add_internal failed for system with -EEXIST, don't try to register things with the same name in the same directory. [ 0.431918][ T1] dma_heap: Unable to create device [ 0.431926][ T1] qcom_system_heap_create: Failed to create 'system', error is -17 [ 0.432158][ T1] qcom_system_heap_create: DMA-BUF Heap: Created 'qcom,system-uncached' [ 0.432279][ T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-pixel' [ 0.432376][ T1] qcom_secure_system_heap_create: DMA-BUF Heap: Created 'qcom,secure-non-pixel' [ 0.432719][ T1] platform soc:qcom,dma-heaps:qcom,qseecom: assigned reserved memory node qseecom_region [ 0.432950][ T1] platform soc:qcom,dma-heaps:qcom,qseecom_ta: assigned reserved memory node qseecom_ta_region [ 0.433260][ T1] platform soc:qcom,dma-heaps:qcom,audio: assigned reserved memory node audio_heap_region@88b00000 [ 0.433395][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom [ 0.433494][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,qseecom-ta [ 0.434294][ T1] qcom_dma_heap_probe: DMA-BUF Heap: Created qcom,audio [ 0.435043][ T1] msm_qpic_nand 1c98000.nand: Adding to iommu group 2 [ 0.436412][ T1] sps_phy2h: sps: BAM device 0x0000000001c9c000 is not registered yet [ 0.436645][ T1] sps_register_bam_device: sps:BAM 0x0000000001c9c000 is registered [ 0.436658][ T1] msm_nand_bam_init: msm_nand_bam_init: BAM device registered: bam_handle 0xffffff80041cb800 [ 0.436813][ T1] sps_bam_enable: sps:BAM 0x0000000001c9c000 (va:0x00000000aefc37e3) enabled: ver:0x19, number of pipes:9 [ 0.437136][ T1] msm_nand_version_check: nand_major:2, nand_minor:1, qpic_major:2, qpic_minor:1 [ 0.437227][ T1] msm_nand_parse_smem_ptable: Parsing partition table info from SMEM [ 0.437335][ T1] msm_nand_parse_smem_ptable: SMEM partition table found: ver: 4 len: 51 [ 0.437361][ T1] msm_nand_version_check: nand_major:2, nand_minor:1, qpic_major:2, qpic_minor:1 [ 0.437488][ T1] msm_nand_flash_onfi_probe: Found an ONFI compliant device MT29F8G08ADBFA , [ 0.437495][ T1] msm_nand_scan: NAND Id: 0x26d0a32c Buswidth: 8Bits Density: 1024 MByte [ 0.437501][ T1] msm_nand_scan: pagesize: 4096 Erasesize: 262144 oobsize: 256 (in Bytes) [ 0.437506][ T1] msm_nand_scan: BCH ECC: 8 Bit [ 0.437510][ T1] msm_nand_scan: CFG0: 0x290409c0, CFG1: 0x08045d5c [ 0.437510][ T1] RAWCFG0: 0x2b8401c0, RAWCFG1: 0x0005055d [ 0.437510][ T1] ECCBUFCFG: 0x00000203, ECCBCHCFG: 0x42040d10 [ 0.437510][ T1] RAWECCCFG: 0x42000d11, BAD BLOCK BYTE: 0x00000175 [ 0.442401][ T41] Freeing initrd memory: 6144K [ 0.442733][ T73] kworker/u8:0 (73) used greatest stack depth: 13808 bytes left [ 0.443067][ T1] Creating 51 MTD partitions on "1c98000.nand": [ 0.443078][ T1] 0x000000000000-0x000000280000 : "sbl" [ 0.444540][ T1] 0x000000280000-0x000000500000 : "sbl_b" [ 0.445952][ T1] 0x000000500000-0x000000680000 : "mibib" [ 0.447285][ T1] 0x000000680000-0x000000b80000 : "efs_backup" [ 0.448600][ T1] 0x000000b80000-0x000002200000 : "efs2" [ 0.450014][ T1] 0x000002200000-0x0000022c0000 : "ddr" [ 0.451344][ T1] 0x0000022c0000-0x000002380000 : "sec" [ 0.452666][ T1] 0x000002380000-0x000002440000 : "emac" [ 0.454143][ T1] 0x000002440000-0x000002500000 : "devinfo" [ 0.455458][ T1] 0x000002500000-0x0000025c0000 : "recoveryinfo" [ 0.456774][ T1] 0x0000025c0000-0x000002680000 : "misc" [ 0.458152][ T1] 0x000002680000-0x000002800000 : "keystore" [ 0.459466][ T1] 0x000002800000-0x000002b80000 : "tz" [ 0.460807][ T1] 0x000002b80000-0x000002c40000 : "tz_devcfg" [ 0.462180][ T1] 0x000002c40000-0x000002d00000 : "apdp" [ 0.463545][ T1] 0x000002d00000-0x000002e00000 : "keymaster" [ 0.464863][ T1] 0x000002e00000-0x000002f80000 : "cmnlib64" [ 0.466228][ T1] 0x000002f80000-0x000003040000 : "xbl_config" [ 0.467557][ T1] 0x000003040000-0x0000031c0000 : "xbl_ramdump" [ 0.468894][ T1] 0x0000031c0000-0x000003280000 : "multi_oem" [ 0.470267][ T1] 0x000003280000-0x000003340000 : "multi_qti" [ 0.471594][ T1] 0x000003340000-0x000003400000 : "aop" [ 0.472983][ T1] 0x000003400000-0x0000034c0000 : "aop_devcfg" [ 0.474332][ T1] 0x0000034c0000-0x0000036c0000 : "qhee" [ 0.475683][ T1] 0x0000036c0000-0x0000037c0000 : "abl" [ 0.477025][ T1] 0x0000037c0000-0x000003b40000 : "uefi" [ 0.478374][ T1] 0x000003b40000-0x000003c00000 : "qupfw" [ 0.479701][ T1] 0x000003c00000-0x000003cc0000 : "shrm" [ 0.481011][ T1] 0x000003cc0000-0x000003d80000 : "cpucpfw" [ 0.482446][ T1] 0x000003d80000-0x000003e40000 : "dtbo" [ 0.483767][ T1] 0x000003e40000-0x000006040000 : "boot" [ 0.485141][ T1] 0x000006040000-0x0000063c0000 : "tz_b" [ 0.486507][ T1] 0x0000063c0000-0x000006480000 : "tz_devcfg_b" [ 0.487832][ T1] 0x000006480000-0x000006540000 : "apdp_b" [ 0.489255][ T1] 0x000006540000-0x000006640000 : "keymaster_b" [ 0.490620][ T1] 0x000006640000-0x0000067c0000 : "cmnlib64_b" [ 0.492015][ T1] 0x0000067c0000-0x000006880000 : "xbl_config_b" [ 0.493496][ T1] 0x000006880000-0x000006a00000 : "xbl_ramdump_b" [ 0.494855][ T1] 0x000006a00000-0x000006ac0000 : "multi_oem_b" [ 0.496183][ T1] 0x000006ac0000-0x000006b80000 : "multi_qti_b" [ 0.497571][ T1] 0x000006b80000-0x000006c40000 : "aop_b" [ 0.498875][ T1] 0x000006c40000-0x000006d00000 : "aop_devcfg_b" [ 0.500228][ T1] 0x000006d00000-0x000006f00000 : "qhee_b" [ 0.501634][ T1] 0x000006f00000-0x000007000000 : "abl_b" [ 0.502943][ T1] 0x000007000000-0x000007380000 : "uefi_b" [ 0.504255][ T1] 0x000007380000-0x000007440000 : "qupfw_b" [ 0.505681][ T1] 0x000007440000-0x000007500000 : "shrm_b" [ 0.506984][ T1] 0x000007500000-0x0000075c0000 : "cpucpfw_b" [ 0.508288][ T1] 0x0000075c0000-0x000007680000 : "dtbo_b" [ 0.509718][ T1] 0x000007680000-0x000009880000 : "boot_b" [ 0.511053][ T1] 0x000009880000-0x000040000000 : "system" [ 0.512362][ T1] msm_nand_probe: NANDc phys addr 0x1c98000, BAM phys addr 0x1c9c000, BAM IRQ 23 [ 0.512379][ T1] msm_nand_probe: Allocated DMA buffer at virt_addr 0x000000006ffec8c0, phys_addr 0xffffe000 [ 0.512387][ T1] msm_nand_probe: Host capabilities:0x00000001 [ 0.512783][ T1] SPI driver spidev has no spi_device_id for qcom,spi-msm-codec-slave [ 0.512795][ T1] SPI driver spidev has no spi_device_id for qcom,si5518-clk [ 0.513831][ T1] MACsec IEEE 802.1AE [ 0.515173][ T1] tun: Universal TUN/TAP device driver, 1.6 [ 0.515323][ T1] slcan: serial line CAN interface driver [ 0.515332][ T1] slcan: 10 dynamic interface channels. [ 0.515339][ T1] CAN device driver interface [ 0.515350][ T1] SPI driver qti-can has no spi_device_id for qcom,renesas,rh850 [ 0.515355][ T1] SPI driver qti-can has no spi_device_id for qcom,nxp,mpc5746c [ 0.518792][ T1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 0.646032][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.646073][ T1] ehci-pci: EHCI PCI platform driver [ 0.646142][ T1] ehci-platform: EHCI generic platform driver [ 0.647151][ T1] usbcore: registered new interface driver usb-storage [ 0.647180][ T1] usbcore: registered new interface driver usb_ehset_test [ 0.647203][ T1] usbcore: registered new interface driver lvs [ 0.649332][ T1] i2c_dev: i2c /dev entries driver [ 0.661523][ T1] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 0.661541][ T1] softdog: soft_reboot_cmd= soft_active_on_boot=0 [ 0.661785][ T1] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.662052][ T1] cpuidle: using governor qcom-cpu-lpm [ 0.665108][ T1] sdhci: Secure Digital Host Controller Interface driver [ 0.665121][ T1] sdhci: Copyright(c) Pierre Ossman [ 0.665125][ T1] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.666181][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.666582][ T1] usbcore: registered new interface driver usbhid [ 0.666590][ T1] usbhid: USB HID core driver [ 0.667955][ T1] [1]: __qmp_rx_worker: RX int without negotiation ack [ 0.692091][ T1] qcom_q6v5_pas 4080000.remoteproc-mss: assigned reserved memory node linux,cma [ 0.693527][ T1] remoteproc remoteproc0: 4080000.remoteproc-mss is available [ 0.696784][ T1] cs_system_cfg: CoreSight Configuration manager initialised [ 0.698513][ T1] coresight-tmc 24048000.tmc: Adding to iommu group 3 [ 0.699675][ T1] coresight-tmc 2404f000.tmc: Adding to iommu group 4 [ 0.722963][ T1] CSCFG registered coresight-etm0 [ 0.722974][ T1] coresight coresight-etm0: CPU0: coresight-etm v4.2 initialized [ 0.724237][ T1] CSCFG registered coresight-etm1 [ 0.724248][ T1] coresight coresight-etm1: CPU1: coresight-etm v4.2 initialized [ 0.725535][ T1] CSCFG registered coresight-etm2 [ 0.725546][ T1] coresight coresight-etm2: CPU2: coresight-etm v4.2 initialized [ 0.726817][ T1] CSCFG registered coresight-etm3 [ 0.726827][ T1] coresight coresight-etm3: CPU3: coresight-etm v4.2 initialized [ 0.727996][ T1] coresight-stm 24002000.stm: coresight-stm : stm_register_device failed, probing deferred [ 0.728836][ T1] coresight coresight-cti-qc_cti: CTI initialized [ 0.729480][ T1] coresight coresight-cti-apss_dl_cti: CTI initialized [ 0.730081][ T1] coresight coresight-cti-apss_cti0: CTI initialized [ 0.730678][ T1] coresight coresight-cti-apss_cti1: CTI initialized [ 0.731286][ T1] coresight coresight-cti-apss_cti2: CTI initialized [ 0.731885][ T1] coresight coresight-cti-cti0: CTI initialized [ 0.732480][ T1] coresight coresight-cti-ddr_ch01_dl_cti_0: CTI initialized [ 0.733110][ T1] coresight coresight-cti-ddr_dl_0_cti_0: CTI initialized [ 0.733710][ T1] coresight coresight-cti-ddr_dl_1_cti_0: CTI initialized [ 0.734308][ T1] coresight coresight-cti-swao_cti: CTI initialized [ 0.734904][ T1] coresight coresight-cti-mss_cti: CTI initialized [ 0.735511][ T1] coresight coresight-cti-mss_q6_cti: CTI initialized [ 0.736093][ T1] coresight coresight-cti-mss_vq6_cti: CTI initialized [ 0.770020][ T1] coresight-csr 24001000.csr: CSR initialized: coresight-csr [ 0.770207][ T1] coresight-csr 24b11000.csr: CSR initialized: coresight-swao-csr [ 0.771234][ T1] coresight-dummy soc:snoc: Dummy device initialized [ 0.771835][ T1] coresight-dummy soc:modem_diag: Dummy device initialized [ 0.772114][ T1] coresight-dummy soc:dummy_sink: Dummy device initialized [ 0.772857][ T1] coresight-dummy soc:dummy_replicator: Dummy device initialized [ 0.774186][ T1] coresight-remote-etm soc:modem_etm0: Remote ETM initialized [ 0.774836][ T1] coresight-remote-etm soc:modem2_etm0: Remote ETM initialized [ 0.783321][ T1] u32 classifier [ 0.783338][ T1] input device check on [ 0.783342][ T1] Actions configured [ 0.783953][ T1] IPv4 over IPsec tunneling driver [ 0.784349][ T1] Initializing XFRM netlink socket [ 0.784377][ T1] IPsec XFRM device driver [ 0.784707][ T1] NET: Registered PF_INET6 protocol family [ 0.785661][ T1] Segment Routing with IPv6 [ 0.785688][ T1] In-situ OAM (IOAM) with IPv6 [ 0.785762][ T1] mip6: Mobile IPv6 [ 0.786185][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.786829][ T1] NET: Registered PF_PACKET protocol family [ 0.786865][ T1] NET: Registered PF_KEY protocol family [ 0.786894][ T1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.786924][ T1] can: controller area network core [ 0.787025][ T1] NET: Registered PF_CAN protocol family [ 0.787034][ T1] can: raw protocol [ 0.787042][ T1] can: broadcast manager protocol [ 0.787053][ T1] can: netlink gateway - max_hops=1 [ 0.787139][ T1] l2tp_core: L2TP core driver, V2.0 [ 0.787146][ T1] 8021q: 802.1Q VLAN Support v1.8 [ 0.787163][ T1] tipc: Activated (version 2.0.0) [ 0.787278][ T1] NET: Registered PF_TIPC protocol family [ 0.787349][ T1] tipc: Started in single node mode [ 0.787565][ T1] NET: Registered PF_VSOCK protocol family [ 0.789652][ T1] registered taskstats version 1 [ 0.789673][ T1] Loading compiled-in X.509 certificates [ 0.791910][ T1] Loaded X.509 cert 'Build time autogenerated kernel key: 1384fad0733612bd96674d72f5afa610c000bca1' [ 0.793004][ T1] Loaded X.509 cert 'IMA-CA: IMA/EVM certificate signing key: f6724d3e943647213ed9c19c6c0b13915f0a1606' [ 0.793727][ T1] Key type .fscrypt registered [ 0.793739][ T1] Key type fscrypt-provisioning registered [ 0.816213][ T41] cpu cpu0: EM: created perf domain [ 0.816841][ T41] gpio-481 (hsm-rst-hog): hogged as output/high [ 0.818875][ T9] spmi spmi-0: PMIC arbiter version v7 (0x70000001) [ 0.840143][ T41] gpio-regulator soc:sdc1-sd-ls-gpio-regulator: nonexclusive access to GPIO for enable [ 0.851828][ T41] pci-msm 1bf0000.qcom,pcie: PCIe: msm_pcie_probe [ 0.852365][ T41] msm_pcie_get_reg: PCIe: RC0: no tcsr resource found. [ 0.852385][ T41] msm_pcie_get_reg: PCIe: RC0: no rumi resource found. [ 0.854387][ T41] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. [ 0.858370][ T41] msm_pcie_enable: PCIe: RC0: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 0.861008][ T41] pcie_phy_init: PCIe RC0 PHY is ready! [ 0.871065][ T41] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. [ 0.979771][ T41] msm_pcie_link_train: PCIe: Assert the reset of endpoint of RC0. [ 0.979785][ T41] msm_pcie_link_train: PCIe RC0 link initialization failed [ 0.980300][ T41] msm_pcie_enumerate: PCIe: RC0: failed to enable [ 0.980312][ T41] msm_pcie_probe: PCIe: RC0 is not enabled during bootup; it will be enumerated upon client request. [ 0.981032][ T41] pci-msm 1c10000.qcom,pcie: PCIe: msm_pcie_probe [ 0.981604][ T41] msm_pcie_get_reg: PCIe: RC2: no tcsr resource found. [ 0.981616][ T41] msm_pcie_get_reg: PCIe: RC2: no rumi resource found. [ 0.983358][ T41] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. [ 0.987178][ T41] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 0.989542][ T41] pcie_phy_init: PCIe RC2 PHY is ready! [ 0.999596][ T41] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ 1.108283][ T41] msm_pcie_link_train: PCIe: Assert the reset of endpoint of RC2. [ 1.108297][ T41] msm_pcie_link_train: PCIe RC2 link initialization failed [ 1.108804][ T41] msm_pcie_enumerate: PCIe: RC2: failed to enable [ 1.108815][ T41] msm_pcie_probe: PCIe: RC2 is not enabled during bootup; it will be enumerated upon client request. [ 1.110803][ T41] qcom-ethqos 23040000.qcom,emac0: Adding to iommu group 5 [ 1.111573][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ eth_wake_irq not found [ 1.111586][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ eth_lpi not found [ 1.113651][ T41] qcom-ethqos 23040000.qcom,emac0: snps,phy-addr property is deprecated [ 1.116036][ T41] qcom-ethqos qcom_ethqos_probe:7040 emac-phy-off-suspend = 4 [ 1.116059][ T41] qcom-ethqos qcom_ethqos_probe:7061 has_xgmac = 1 GMAC4_version_id = 0x31 [ 1.116070][ T41] qcom-ethqos qcom_ethqos_probe:7071 emac_core_version = 1073741824 [ 1.116183][ T41] qcom-scm: __qcom_scm_get_emac_maxspeed: scm get max_spd ret=0x0 res0 = 0 res1 =0 res2 = 0 [ 1.116192][ T41] qcom-ethqos qcom_ethqos_probe:7077 7077 qcom_ethqos_probe max speed = 0 [ 1.116434][ T41] qcom-ethqos 23040000.qcom,emac0: User ID: 0x76, Synopsys ID: 0x31 [ 1.116455][ T41] qcom-ethqos 23040000.qcom,emac0: XGMAC2 [ 1.116469][ T41] qcom-ethqos 23040000.qcom,emac0: DMA HW capability register supported [ 1.116475][ T41] qcom-ethqos 23040000.qcom,emac0: RX Checksum Offload Engine supported [ 1.116480][ T41] qcom-ethqos 23040000.qcom,emac0: COE Type 1 [ 1.116486][ T41] qcom-ethqos 23040000.qcom,emac0: TX Checksum insertion supported [ 1.116491][ T41] qcom-ethqos 23040000.qcom,emac0: TSO supported [ 1.116496][ T41] qcom-ethqos 23040000.qcom,emac0: Enable RX Mitigation via HW Watchdog Timer [ 1.116507][ T41] qcom-ethqos 23040000.qcom,emac0: device MAC address 52:7c:43:3c:b9:5f [ 1.116516][ T41] qcom-ethqos 23040000.qcom,emac0: Enabled L3L4 Flow TC (entries=8) [ 1.116523][ T41] qcom-ethqos 23040000.qcom,emac0: Enabled RFS Flow TC (entries=8) [ 1.116531][ T41] qcom-ethqos 23040000.qcom,emac0: Enabling HW TC (entries=128, max_off=64) [ 1.116537][ T41] qcom-ethqos 23040000.qcom,emac0: TSO feature enabled [ 1.116543][ T41] qcom-ethqos 23040000.qcom,emac0: Using 40 bits DMA width [ 1.454476][ T41] qcom-scm: __qcom_scm_iomacro_dump: scm io macro dump 0x230bf000 buf = 0x80c01000 len = 0x200 [ 1.454686][ T41] qcom-ethqos 23040000.qcom,emac0: ext_snapshot_num = 0 [ 1.455111][ T41] qcom-scm: __qcom_scm_ethqos_configure: scm ethqos configure 0x230bf000 0xa 0x4 0x80c00000, 0x200 done =0x0 [ 1.455140][ T41] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1370 qcom_ethqos_serdes_update_sgmii : Serdes Speed set to 1GB speed [ 1.460293][ T41] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1385 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000 [ 1.460417][ T41] qcom-ethqos 23040000.qcom,emac0: IRQ pcs_intr not found [ 1.460427][ T41] qcom-ethqos ethqos_xpcs_intr_config:49 XPCS IRQ configuration information not found [ 1.460435][ T41] qcom-ethqos ethqos_xpcs_init:99 No DTSI entry found for XPCS interrupt, using non-interrupt mode [ 1.460453][ T41] qcom-ethqos ethqos_xpcs_init:111 Successfully initialized XPCS [ 1.460836][ T41] qcom-ethqos ethqos_create_emac_rec_device_node:5848 mac recovery node opened [ 1.462170][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.462199][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462221][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462293][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.462405][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.462427][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462450][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462510][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.462622][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.462644][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462666][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462724][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.462836][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.462858][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462880][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.462939][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.463051][ T41] PMIC PON log: Reset Trigger: PS_HOLD [ 1.463073][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.463094][ T41] PMIC PON log: Reset Type: HARD_RESET [ 1.463151][ T41] PMIC PON log: PON Trigger: HARD_RESET [ 1.463952][ T41] qcom-bwmon: Zone thres larger than hw limit: hi:97 med:400 lo:0 [ 1.464951][ T41] 984000.qcom,qup_uart: ttyMSM0 at MMIO 0x984000 (irq = 131, base_baud = 0) is a MSM [ 6.094308][ T41] printk: console [ttyMSM0] enabled [ 6.101051][ T41] msm_geni_serial 98c000.qcom,qup_uart: Wakeup byte 0xfd [ 6.109466][ T41] msm_geni_serial 98c000.qcom,qup_uart: Serial port0 added.FifoSize 64 is_console0 [ 6.120102][ T41] msm_geni_serial 98c000.qcom,qup_uart: gsi_mode:0 [ 6.126654][ T41] 98c000.qcom,qup_uart: ttyHS0 at MMIO 0x98c000 (irq = 132, base_baud = 0) is a MSM [ 6.137085][ T41] msm_geni_serial 990000.qcom,qup_uart: IRQ index 1 not found [ 6.144615][ T41] msm_geni_serial 990000.qcom,qup_uart: No wakeup IRQ configured [ 6.152405][ T41] msm_geni_serial 990000.qcom,qup_uart: No Shutdown config specified [ 6.161604][ T41] msm_geni_serial 990000.qcom,qup_uart: Serial port1 added.FifoSize 64 is_console0 [ 6.172217][ T41] msm_geni_serial 990000.qcom,qup_uart: gsi_mode:0 [ 6.178771][ T41] 990000.qcom,qup_uart: ttyHS1 at MMIO 0x990000 (irq = 135, base_baud = 0) is a MSM [ 6.189216][ T41] msm_geni_serial 9a0000.qcom,qup_uart: IRQ index 1 not found [ 6.196742][ T41] msm_geni_serial 9a0000.qcom,qup_uart: No wakeup IRQ configured [ 6.204535][ T41] msm_geni_serial 9a0000.qcom,qup_uart: No Shutdown config specified [ 6.213737][ T41] msm_geni_serial 9a0000.qcom,qup_uart: Serial port2 added.FifoSize 64 is_console0 [ 6.224352][ T41] msm_geni_serial 9a0000.qcom,qup_uart: gsi_mode:0 [ 6.230902][ T41] 9a0000.qcom,qup_uart: ttyHS2 at MMIO 0x9a0000 (irq = 139, base_baud = 0) is a MSM [ 6.243553][ T41] spi_geni 980000.spi: spi_geni_probe: completed 0 [ 6.250225][ T153] spi_geni 980000.spi: tx_fifo 16 rx_fifo 32 tx_width 32 [ 6.252712][ T41] spi_geni 998000.spi: spi_geni_probe: completed 0 [ 6.266480][ T41] spi_geni 99c000.spi: spi_geni_probe: completed 0 [ 6.276181][ T41] spmi spmi-1: SPMI PMIC arbiter debug bus controller added [ 6.285176][ T41] i2c_geni 988000.i2c: Bus frequency is set to 400000Hz. [ 6.292436][ T41] i2c_geni 988000.i2c: Multi-EE usecase [ 6.299025][ T41] at24 2-0052: supply vcc not found, using dummy regulator [ 6.337334][ T41] i2c_geni 988000.i2c: I2C probed [ 6.343286][ T41] i2c_geni 994000.i2c: Bus frequency is set to 400000Hz. [ 6.352715][ T41] [ 6.352715][ T41] [I]6SMI230<222>SMI230GYRO i2c adapter is at 0x00000000d149fdbd [ 6.365137][ T41] [ 6.365137][ T41] [E]3SMI230<238>Bosch Sensor Device SMI230GYRO initialization failed, error -3 [ 6.378641][ T41] SMI230GYRO: probe of 5-0069 failed with error -5 [ 6.386324][ T41] [ 6.386324][ T41] [I]6SMI230<152>SMI230ACC i2c adapter is at 0x00000000d149fdbd [ 6.399546][ T41] [ 6.399546][ T41] [E]3SMI230<95>I2C xfer error [ 6.408139][ T41] [ 6.408139][ T41] [E]3SMI230<168>Bosch Sensor Device SMI230ACC initialization failed, error -2 [ 6.421447][ T41] SMI230ACC: probe of 5-0019 failed with error -5 [ 6.427964][ T41] i2c i2c-5: Failed to register i2c client iam20680 at 0x69 (-16) [ 6.435850][ T41] i2c i2c-5: of_i2c: Failure registering /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/iam20680@69 [ 6.446507][ T41] i2c i2c-5: Failed to create I2C device for /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/iam20680@69 [ 6.458551][ T41] st_asm330lhh_i2c 5-006b: Ver: v2.0.1-4 [ 6.464218][ T41] st_asm330lhh_i2c 5-006b: Ver: v2.0.1-4 [ 6.470096][ T41] st_asm330lhh_i2c 5-006b: failed to read whoami register [ 6.477267][ T41] st_asm330lhh_i2c: probe of 5-006b failed with error -22 [ 6.484484][ T41] i2c i2c-5: Failed to register i2c client asm330lhhx at 0x6b (-16) [ 6.492545][ T41] i2c i2c-5: of_i2c: Failure registering /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/asm330lhhx@6b [ 6.503377][ T41] i2c i2c-5: Failed to create I2C device for /soc/qcom,qupv3_0_geni_se@9c0000/i2c@994000/asm330lhhx@6b [ 6.514638][ T41] i2c_geni 994000.i2c: I2C probed [ 6.520361][ T41] irq: IRQ164: trimming hierarchy from :soc:interrupt-controller@b220000-9 [ 6.529247][ T41] pps pps0: new PPS source soc:pps.-1 [ 6.534670][ T41] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 164 [ 6.543109][ T41] pps pps0: Registered IRQ 164 as PPS source [ 6.550892][ T9] sdhci_msm 8804000.sdhci: Adding to iommu group 6 [ 6.551982][ T41] coresight-tmc 24048000.tmc: setting tmc etr sw usb buf size 0x400000 [ 6.558393][ T9] sdhci_msm 8804000.sdhci: nvmem cell get failed [ 6.566029][ T41] coresight-tmc 24048000.tmc: setting tmc etr sw pcie buf size 0x2000000 [ 6.581505][ T9] sdhci_msm 8804000.sdhci: core_reset unavailable,err = -2 [ 6.588804][ T9] sdhci_msm 8804000.sdhci: error -EOPNOTSUPP: unable to acquire core_reset [ 6.589297][ T41] tmc_etr_usb_init: ETR usb property is not configured! [ 6.598453][ T9] sdhci_msm 8804000.sdhci: TCXO clk not present (-2) [ 6.611211][ T9] sdhci_msm 8804000.sdhci: Failed to get bus_scale data [ 6.619268][ T41] coresight coresight-stm: STM32 initialized [ 6.625367][ T9] mmc0: CQHCI version 5.10 [ 6.626083][ T41] sdc2_sd_vdd: supplied by sdc2_sd_ls_vccb [ 6.643796][ T41] input: pmic_pwrkey as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:pwrkey/input/input0 [ 6.661613][ T66] sdhci_msm 8804000.sdhci: sdhci_msm_hw_reset: failed, err = -95 [ 6.662799][ T9] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit [ 6.663798][ T41] input: pmic_resin as /devices/platform/soc/c42d000.qcom,spmi/spmi-0/0-00/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300/c42d000.qcom,spmi:qcom,pmk8550@0:pon_hlos@1300:resin/input/input1 [ 6.665068][ T41] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: registered as rtc0 [ 6.665115][ T41] rtc-pm8xxx c42d000.qcom,spmi:qcom,pmk8550@0:rtc@6100: setting system clock to 1970-01-01T03:53:13 UTC (13993) [ 6.680847][ T41] extcon-pm8941-misc c42d000.qcom,spmi:qcom,pmx75@1:qcom,pmd-vbus-det@1500: IRQ usb_id not found [ 6.698006][ T9] sdhci_msm 8804000.sdhci: mmc0: CQE init: success [ 6.707783][ T41] nvmem-cells property is not defined in ssusb node [ 6.721000][ T153] qti-can spi0.0: QTI CAN probe failed [ 6.729758][ T41] msm-dwc3 a600000.ssusb: IRQ hs_phy_irq not found [ 6.748040][ T66] mmc0: Command Queue Engine enabled [ 6.755507][ T41] msm-dwc3 a600000.ssusb: Nominal values not found. [ 6.759799][ T66] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.766388][ T41] msm-dwc3 a600000.ssusb: Using default bus votes [ 6.774079][ T66] mmcblk0: mmc0:0001 8GUF4R 7.28 GiB [ 6.780864][ T41] msm-dwc3 a600000.ssusb: Could not get usb psy [ 6.786748][ T66] mmcblk0: p1 [ 6.795472][ T66] mmcblk0boot0: mmc0:0001 8GUF4R 31.9 MiB [ 6.797053][ T57] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode [ 6.802371][ T66] mmcblk0boot1: mmc0:0001 8GUF4R 31.9 MiB [ 6.814919][ T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK [ 6.815864][ T66] mmcblk0rpmb: mmc0:0001 8GUF4R 4.00 MiB, chardev (506:0) [ 6.839703][ T57] dwc3 a600000.dwc3: Adding to iommu group 7 [ 6.846421][ T57] eusb2-repeater c42d000.qcom,spmi:qcom,pmx75@1:qcom,eusb2-repeater@fd00: eUSB2 repeater status:OK [ 6.848422][ T41] sdhci_msm 8844000.sdhci: Adding to iommu group 8 [ 6.848773][ T1] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.849331][ T1] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.849613][ T169] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 6.849623][ T169] cfg80211: failed to load regulatory.db [ 6.880077][ T1] ALSA device list: [ 6.893155][ T41] sdhci_msm 8844000.sdhci: Got CD GPIO [ 6.895296][ T1] No soundcards found. [ 6.899457][ T41] sdhci_msm 8844000.sdhci: core_reset unavailable,err = -2 [ 6.905901][ T57] msm-dwc3 a600000.ssusb: dwc3 msm iommu fault handler registered [ 6.908719][ T41] sdhci_msm 8844000.sdhci: error -EOPNOTSUPP: unable to acquire core_reset [ 6.933763][ T41] sdhci_msm 8844000.sdhci: TCXO clk not present (-2) [ 6.940499][ T41] sdhci_msm 8844000.sdhci: Failed to get bus_scale data [ 6.980410][ T41] mmc1: SDHCI controller on 8844000.sdhci [8844000.sdhci] using ADMA 64-bit [ 6.989569][ T1] Freeing unused kernel memory: 768K [ 6.996820][ T1] Run /init as init process [ 7.009772][ T191] busybox (191) used greatest stack depth: 13104 bytes left [ 7.033941][ T197] busybox.suid (197) used greatest stack depth: 12800 bytes left Init: EarlySetup Init: SetArgs [ 7.070575][ T208] busybox (208) used greatest stack depth: 11792 bytes left [ 7.079321][ T210] ubi0: attaching mtd50 [ 8.167364][ T210] ubi0: scanning is finished [ 8.179344][ T210] ubi0: attached mtd50 (name "system", size 871 MiB) [ 8.186083][ T210] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes [ 8.193877][ T210] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096 [ 8.201578][ T210] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192 [ 8.209454][ T210] ubi0: good PEBs: 3486, bad PEBs: 0, corrupted PEBs: 0 [ 8.216436][ T210] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128 [ 8.224582][ T210] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 625043565 [ 8.234599][ T210] ubi0: available PEBs: 0, total reserved PEBs: 3486, PEBs reserved for bad PEB handling: 80 [ 8.244897][ T211] ubi0: background thread "ubi_bgt0d" started, PID 211 UBI device number 0, total 3486 LEBs (885276672 bytes, 844.2 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) [ 8.279366][ T225] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 8.368565][ T225] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs_a", R/O mode [ 8.377981][ T225] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 8.388891][ T225] UBIFS (ubi0:0): FS size: 144498688 bytes (137 MiB, 569 LEBs), max 2146 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 8.401849][ T225] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 8.408574][ T225] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 6A20AE40-5348-4F90-B6DE-B47D508C2541, small LPT model Init: MountSystem [ 8.432281][ T227] busybox.suid (227) used greatest stack depth: 11568 bytes left Init: MoveMountToSystem [ 8.853190][ T231] modprobe (231) used greatest stack depth: 10512 bytes left systemd 244.5+ running in system mode. (-PAM +AUDIT +SELINUX +IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS -KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) Detected virtualization vm-other. Detected architecture arm64. Welcome to QTI Linux Telematics distro with debug capabilities. android-1.0-25-g42ad0b88! Set hostname to . Initializing machine ID from random generator. Installed transient /etc/machine-id file. [ 9.039431][ T233] systemd-run-gen (233) used greatest stack depth: 10368 bytes left Configuration file /lib/systemd/system/systemrw.mount.d/systemrw.conf is marked executable. Please remove executable permission bits. Proceeding anyway. /lib/systemd/system/earlyinit-logd.service:16: PIDFile= references a path below legacy directory /var/run/, updating /var/run/logd.pid → /run/logd.pid; please update the unit file accordingly. Configuration file /lib/systemd/system/dbus.service.d/dbus.conf is marked world-writable. Please remove world writability permission bits. Proceeding anyway. multi-user.target: Wants dependency dropin /lib/systemd/system/multi-user.target.wants/tz_log.service target /lib/systemd/system/qrng.service has different name Configuration file /lib/systemd/system/overlay_selinuxrw-workdir.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. /lib/systemd/system/ipacmdiag.service:4: Failed to add dependency on diag-router, ignoring: Invalid argument /lib/systemd/system/ipacmdiag.service:5: Failed to add dependency on diag-router, ignoring: Invalid argument /lib/systemd/system/emac_ioss.service:1: Assignment outside of section. Ignoring. /lib/systemd/system/emac_ioss.service:2: Assignment outside of section. Ignoring. /etc/systemd/system/agm_server.service:14: Unknown key name 'SystemdService' in section 'Service', ignoring. [ OK ] Created slice system-getty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Slices. [ OK ] Reached target Swap. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Mounting /systemrw... Mounting /data... Mounting POSIX Message Queue File System... Mounting /persist... var-volatile.moun[ 9.850299][ T234] UBIFS (ubi0:3): Mounting in unauthenticated mode t: Directory /var/volatile to mount over is not empty, mounting anyway. Mounting /var/volatile... Starting Load dataipa dlkm... [ 9.905029][ T237] UBIFS (ubi0:4): Mounting in unauthenticated mode Starting Mount firmware pa…on to /firmware mount point... Starting Load datarmnet dlkm service... [ OK ] Started qrtr-filter Service. [ 9.921211][ T244] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 244 [ 9.945258][ T245] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 245 [ 9.945547][ T235] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 9.967544][ T246] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 246 Starting Load/Save Random Seed... Starting Apply Kernel Variables... [ OK ] Started zram setup service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted /var/volatile. [ OK ] Started Load/Save Random Seed. [ 10.122640][ T239] dataipa:start/load [ 10.129368][ T241] rmnet:start/load [ OK ] Started Apply Kernel Variables. [ 10.152173][ T242] qrtr_bpf_filter_attach bpf filter with fd 15 attached with qrtr [ 10.186818][ T248] zram0: detected capacity change from 0 to 617544 [ 10.228474][ T234] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "systemrw" [ 10.236994][ T234] UBIFS (ubi0:3): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.247890][ T234] UBIFS (ubi0:3): FS size: 4063232 bytes (3 MiB, 16 LEBs), max 25 LEBs, journal size 1777665 bytes (1 MiB, 5 LEBs) [ 10.258619][ T256] rmnet_core: loading out-of-tree module taints kernel. [ 10.260132][ T234] UBIFS (ubi0:3): reserved for root: 191915 bytes (187 KiB) [ 10.269437][ T256] rmnet_core: module verification failed: signature and/or required key missing - tainting kernel [ 10.274869][ T234] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID A469C4FD-4238-42C7-BE04-07C9EDA28A27, small LPT model [ 10.288007][ T257] (NULL device *): msm_gsi_probe:6257 No MSIs configured [ 10.321221][ T241] done loading rmnet core modules [ 10.321991][ T258] 0 [ OK ] Mounted /systemrw. [ 10.337413][ T258] rootfs_a [ 10.343078][ T258] 1 [ 10.344518][ T263] Adding 308768k swap on /dev/zram0. Priority:10 extents:1 across:308768k SS [ OK ] Started Load datarmnet dlkm service. [ 10.357326][ T258] rootfs_b Mounting Kernel Configuration File System... [ 10.365342][ T258] 2 Mounting Kernel Debug File System... [ 10.376396][ T258] usrfs [ 10.384043][ T258] 3 Mounting Temporary Directory (/tmp)... [ 10.390663][ T258] systemrw [ OK ] Started QCMAP_Bootup service.[ 10.402466][ T258] 4 Starting QCMAP_copybind service... [ OK ] Started irsc-util Service. [ 10.415391][ T258] persist [ 10.422293][ T258] 5 [ OK ] Started qrtr-ns Service. [ 10.428496][ T258] volume id found for firmware_a, volume id 5 [ 10.444439][ T252] found volume index for firmware mount 5 Starting Netmgrd Service... [ OK ] Started SSREQ server Service. Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ 10.502580][ T237] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "persist" [ 10.511042][ T237] UBIFS (ubi0:4): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.522079][ T237] UBIFS (ubi0:4): FS size: 4063232 bytes (3 MiB, 16 LEBs), max 25 LEBs, journal size 1777665 bytes (1 MiB, 5 LEBs) [ 10.534940][ T237] UBIFS (ubi0:4): reserved for root: 191915 bytes (187 KiB) [ 10.542614][ T237] UBIFS (ubi0:4): media format: w5/r0 (latest is w5/r0), UUID 3B8E7BEE-F16E-4D84-AF11-18CCA654A854, small LPT model [ 10.558271][ T252] /dev/ubiblock0_5 desnt exists, creating [ 10.566963][ T235] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "usrfs" [ 10.575241][ T235] UBIFS (ubi0:2): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 10.586170][ T235] UBIFS (ubi0:2): FS size: 323534848 bytes (308 MiB, 1274 LEBs), max 2146 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 10.599509][ T235] UBIFS (ubi0:2): reserved for root: 0 bytes (0 KiB) [ 10.606298][ T235] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID CFE1645F-BE76-4F52-A95D-A0A6A6B82555, small LPT model [ OK ] Mounted /persist. [ OK ] Mounted /data. [ OK ] Started Staring tftp server. [ 10.654229][ T286] block ubiblock0_5: created from ubi0:5(firmware_a) [ OK ] Started Netmgrd Service. [ 10.803221][ T280] systemd-tmpfiles[280]: /etc/tmpfiles.d/platform.conf:38: Line references path below legacy directory /var/run/, updating /var/run/resolv.conf → /run/resolv.conf; please update the tmpfiles.d/ drop-in file accordingly. [ 10.840184][ T252] root fstype is ubifs [ 10.850569][ T302] UBIFS (ubi0:5): Mounting in unauthenticated mode [ 10.857419][ T304] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 304 [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started QCMAP_copybind service. Starting usb Service... QCMAP_copybind.service: Succeeded. [ 11.112776][ T302] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "firmware_a" [ 11.121482][ T302] UBIFS (ubi0:5): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 11.132418][ T302] UBIFS (ubi0:5): FS size: 113008640 bytes (107 MiB, 445 LEBs), max 567 LEBs, journal size 9404416 bytes (8 MiB, 38 LEBs) [ 11.145301][ T302] UBIFS (ubi0:5): reserved for root: 0 bytes (0 KiB) [ 11.152051][ T302] UBIFS (ubi0:5): media format: w4/r0 (latest is w5/r0), UUID 801125C1-E654-4321-90EE-019FAB747337, small LPT model firmware-mount.service: Succeeded. [ OK ] Started Mount firmware par…tion to /firmware mount point. [ 11.187960][ T329] remoteproc remoteproc0: powering up 4080000.remoteproc-mss Starting Service to trigge…em load based on remoteproc... [ 11.234385][ T329] remoteproc remoteproc0: Booting fw image modem.mdt, size 7420 [ 11.250874][ T310] systemd-udevd[310]: Network interface NamePolicy= disabled on kernel command line, ignoring. [SSREQ-Server]I:Successfully started SSREQ server[ 11.388877][ T347] QCMAP_Bootup:Start Main [ 11.507681][ T364] Mass Storage Function, version: 2009/09/11 [ 11.509118][ T310] systemd-udevd[310]: Configuration file /etc/udev/rules.d/automountemmc.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.519679][ T262] ipam: no symbol version for gsi_cleanup_channel [ 11.530131][ T364] LUN: removable file: (no medium) [ 11.532521][ T310] systemd-udevd[310]: Configuration file /etc/udev/rules.d/automountsdcard.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.564397][ T365] Mass Storage Function, version: 2009/09/11 [ 11.570458][ T365] LUN: removable file: (no medium) [ 11.582870][ T310] systemd-udevd[310]: Configuration file /etc/udev/rules.d/ipacm.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.584209][ T262] ipa get_ipa_dts_configuration:11838 No gunyah-label info [ 11.600541][ T367] file system registered [ 11.606926][ T310] systemd-udevd[310]: Configuration file /etc/udev/rules.d/ipacm.rules is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 11.634030][ T310] systemd-udevd[310]: Configuration file /etc/udev/rules.d/mountpartitions.rules is marked executable. Please remove executable permission bits. Proceeding anyway. [ 11.653369][ T363] ifconfig (363) used greatest stack depth: 10352 bytes left [ 11.654770][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_ap: Adding to iommu group 9 [ 11.662790][ T375] QCMAP_Bootup:Start DHCP server [ 11.689168][ T380] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0) [ 11.698018][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_wlan: Adding to iommu group 10 [ 11.707890][ T382] systemd-udevd[382]: Using default interface naming scheme 'v243'. [ OK ] Started udev Kernel Device Manager. [ 11.717751][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_uc: Adding to iommu group 11 [ 11.733360][ T398] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1) [ 11.746084][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_wlan1: Adding to iommu group 12 [ 11.756930][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_wlan2: Adding to iommu group 13 [ 11.765368][ T399] write to ipa devnode [ 11.765407][ T401] write to ipa devnode [ 11.766434][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_eth: Adding to iommu group 5 [ 11.767751][ T262] ipa 3e00000.qcom,ipa:ipa_smmu_eth1: Adding to iommu group 14 [ 11.769368][ T41] ipa ipa_smmu_11ad_cb_probe:13019 11AD SMMU is disabled [ 11.811585][ T416] rmnet_ipa3 started initialization [ 11.817990][ T41] IPA FW loaded successfully [ 11.829368][ T414] write to ipa devnode [ 11.836294][ T41] gsi soc:qcom,msm_gsi: gsi_register_device:1574 GSI irq is wake enabled 37 [ 11.857802][ T41] ipa_ut ipa_ut_module_init:1037 Loading IPA test module... [ 11.865575][ T41] ipa-lnx-stats ipa_tlpd_stats_ioctl_init:1966 IPA ipa_lnx_stats_ioctl major(492) initial ok :>>>> [ 11.876532][ T41] ipa-lnx-stats ipa_tlpd_stats_init:1989 IPA_LNX_STATS_IOCTL init success [ 11.885141][ T41] IPA driver initialization was successful. [ 11.909105][ T425] RNDIS_IPA module is loaded. [ 11.934264][ T460] gsi_set_inst_name: prot_id = 2, prev inst do not freed yet [ 11.951333][ T390] dnsmasq (390) used greatest stack depth: 10320 bytes left [ 11.961395][ T467] dnsmasq --conf-file=/systemrw/data/dnsmasq.conf --dhcp-leasefile=/var/run/data/dnsmasq.leases --addn-hosts=/etc/data/hosts --pid-file=/var/run/data/dnsmasq.pid --resolv-file=/etc/resolv.conf -i bridge0 -I lo -z --dhcp-range=bridge0,192.168.225.20,192.168.225.60,255.255.255.0,43200 --dhcp-hostsfile=/etc/data/dhcp_hosts --dhcp-option-force=6,192.168.225.1 --dhcp-script=/bin/dnsmasq_script.sh [ 11.999156][ T451] ecm driver init [ 12.009117][ T475] QCMAP_Bootup:DHCP server started [ 12.060328][ T494] QCMAP_Bootup ecm mapped to bridge0 [ 12.070289][ T495] QCMAP_Bootup:Init Complete [ 12.120827][ T474] IPA clients manager init [ 12.125295][ T474] ipa_usb driver init [ 12.129495][ T474] ipa_usb registered successfully [ 12.134547][ T474] exit: IPA_USB init success! [ 12.139224][ T474] ipa_wdi3 registered successfully [ 12.144383][ T474] ipa_gsb registered successfully [ 12.149454][ T474] ipa_uc_offload registered successfully [ 12.155136][ T474] ipa_mhi registered successfully [ 12.160177][ T474] ipa_wigig registered successfully [ 12.165394][ T474] ipa_eth registered successfully [ 12.170489][ T65] rmnet_ipa3 started initialization [ 12.175744][ T65] IPA SSR support = True [ 12.180045][ T65] IPA SG support = True [ 12.184221][ T65] using default for wan-rx-desc-size = 256 [ 12.190170][ T474] IPA driver is now in ready state [ 12.190793][ T65] ipa-wan ipa3_wwan_register_netdev_pm_client:4952 rmnet_ipa%d register done [ 12.195342][ T474] ipa_qdss registered successfully [ 12.211912][ T65] ipa-wan ipa3_wwan_probe:5179 rmnet_ipa completed initialization [ 12.221413][ T239] done loading dataipa core modules [ OK ] Started Load dataipa dlkm. [ 12.299700][ T535] Switching to composition number 0x901D [ OK ] Started usb Service. [ OK ] Started diag-router Service. Starting adbd Service... [ 12.370204][ T552] Launch adb is starting adbd... [ 12.377858][ T546] read descriptors [ 12.386681][ T546] read strings [ 12.396174][ T544] dwc3 a600000.dwc3: request 0000000000000000 was not queued to ep0out [ 12.404680][ T544] udc a600000.dwc3: failed to start g1: -19 [ 12.543179][ T564] read descriptors [ 12.546974][ T564] read strings [ 12.577745][ T564] dwc3 a600000.dwc3: Set IRQ thread:irq/168-dwc3 pid:565 to SCHED_NORMAL prio [ 12.700284][ T65] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 12.843739][ T65] android_work: sent uevent USB_STATE=CONNECTED [ 12.885448][ T65] msm_eusb2_phy ff4000.hsphy: Could not get usb psy [ 12.892499][ T65] android_work: sent uevent USB_STATE=CONFIGURED [ OK ] Started adbd Service. [*** ] (1 of 4) A start job is running for /dev/input/event0 (10s / 1min 30s) [ 13.477260][ T552] Started adbd. [ 20.178389][ T329] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:5674 IPA received MPSS AFTER_POWERUP [ 20.190750][ T329] ipa ipa3_odl_pipe_open:371 adpl pipe not configured [ 20.197220][ T55] qcom_smd_qrtr_probe:SMD QRTR driver probed [ 20.197576][ T329] ipa-wan ipa3_lcl_mdm_ssr_notifier_cb:5687 IPA AFTER_POWERUP handling is complete [ 20.203633][ C0] qrtr: Modem QMI Readiness TX cmd:0x2 node[0x0] [ 20.212940][ T329] remoteproc remoteproc0: remote processor 4080000.remoteproc-mss is now up [ *** ] (2 of 4) A start job is running for /dev/smcinvoke (10s / 1min 30s) [ OK ] Started Service to trigger…odem load based on remoteproc. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ 20.270176][ T574] systemd-tmpfiles[574]: /etc/tmpfiles.d/platform.conf:38: Line references path below legacy directory /var/run/, updating /var/run/resolv.conf → /run/resolv.conf; please update the tmpfiles.d/ drop-in file accordingly. [ 20.333369][ T574] systemd-tmpfiles[574]: symlink(/etc/machine-id, /var/lib/dbus/machine-id) failed: Read-only file system [ 20.349138][ T574] systemd-tmpfiles[574]: Failed to open directory 'coredump': No such file or directory [ 20.359271][ T52] coresight-remote-etm soc:modem2_etm0: Connection established between QMI handle and 11 service [ 20.359296][ T52] coresight-remote-etm soc:modem_etm0: Connection established between QMI handle and 2 service [ 20.380777][ T574] systemd-tmpfiles[574]: Failed to open directory 'private': No such file or directory [ 20.391124][ T574] systemd-tmpfiles[574]: Failed to open directory 'private': No such file or directory [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started D-Bus System Message Bus. [ 20.456249][ T153] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 Starting Logd logging Service... Starting IPACM Service... [ 20.477219][ T57] ipa ipa3_uc_wdi_event_log_info_handler:398 WDI stats ofst=0x141100 [ 20.490021][ T153] ipa-wan ipa3_q6_clnt_svc_arrive:1870 send ipa3_qmi_init_modem_send_sync_msg to modem rc:0 Starting udev Coldplug all Devices... [ 20.501066][ T57] ipa ipa3_uc_ntn_event_log_info_handler:19 NTN protocol missing 0x9 [ OK ] Started Logd logging Service. [ OK ] Started Monitor /dev/socket path to start logd. [ OK ] Reached target Paths. [ 20.758115][ T585] logd.auditd: start [ 20.762541][ T585] logd.klogd: 20757546814 [ 20.812280][ T597] write to ipa devnode [ OK ] Started IPACM Service. Starting QCMAP connectionManager service... [ 21.012342][ T645] cnss2 script called from: qcmap [ 21.338163][ T694] QCMAP: Start [ 21.531099][ T387] systemd-udevd[387]: Using default interface naming scheme 'v243'. [ OK ] Started QCMAP connectionManager service. [ OK ] Reached target Sockets. [ OK ] Started Post modem boot service. Starting qti service... Starting Bind mount volatile /etc/ObeConfig.conf... Starting Bind mount volatile /etc/data/adpl/... [ 21.601233][ T644] netlink: 4 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 21.646458][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: PHY [stmmac_dev0-0:00] driver [RTL9010AA_RTL9010AN Ethernet] (irq=POLL) Starting Bind mount volatile /etc/data/ipa/... [ 21.666473][ T742] qcom-ethqos: stmmac_init_phy early eth setting stmmac init Starting Bind mount volatile /etc/data/usb/... [ 21.676154][ T742] qcom-ethqos: stmmac_init_phy priv phydev is null [ 21.689056][ T742] qcom-ethqos: stmmac_init_phy priv->phydev is set with dev->phydev Starting Bind mount volatile /etc/data/... [ 21.700458][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-1 Starting Bind mount volatile /etc/cv2x/enable... Starting Bind mount volatile /etc/misc/wifi/... Starting Bind mount volatile /etc/tel.conf... [ 21.743098][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-2 [ OK ] Started udev Coldplug all Devices. [ OK ] Started qti service. [ OK ] Started Bind mount volatile /etc/ObeConfig.conf. [ 21.774841][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-3 [ OK ] Started Bind mount volatile /etc/cv2x/enable. [ OK ] Started Bind mount volatile /etc/data/usb/. [ 21.860390][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: Register MEM_TYPE_PAGE_POOL RxQ-4 [ OK ] Started Bind mount volatile /etc/data/adpl/. [ OK ] Started Bind mount volatile /etc/tel.conf. [ 21.890008][ T846] QTI: Start main postmss.service: Succeeded. [ 21.919349][ T742] qcom-ethqos ethqos_serdes_power_up:1799 ethqos_serdes_power_up : speed = 10 interface = 4 [ 21.919396][ T742] qcom-ethqos qcom_ethqos_serdes_update_sgmii:1385 qcom_ethqos_serdes_update_sgmii : Exit serdes speed = 1000 [ 21.935072][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: No Safety Features support found [ 21.955933][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: IEEE 1588-2008 Advanced Timestamp supported [ 21.973203][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: registered PTP clock [ OK ] Started Bind mount volatile /etc/data/ipa/. [ 21.996160][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: FPE workqueue start [ 22.006361][ T742] qcom-ethqos 23040000.qcom,emac0 eth0: configuring for phy/sgmii link mode [ OK ] Reached target Hardware activated USB gadget. [ 22.024681][ T883] QTI: NO ETH PH enabled [ 22.039815][ T887] QTI: DPM Init cb [ 22.050722][ T889] QTI: DPM Init cb [ 22.067543][ T902] QTI: Modem In Service [ OK ] Started Bind mount volatile /etc/misc/wifi/. [ 22.108602][ T905] Found mmcblk0 add [ 22.121325][ T383] ipa ipa3_set_aggr_limit:5875 get close-by 8192 [ 22.121799][ T905] Reading partition from mmcblk0 [ 22.128751][ T383] ipa ipa3_set_aggr_limit:5877 set default rx_buff_sz 7744 [ 22.146527][ T383] ipa ipa3_set_aggr_limit:5870 set rx_buff_sz config from netmngr 16384 [ 22.176627][ T945] QCMAP: HW Address for dev bridge0: 7e:2b:3d:8c:44:e5 [ 22.230790][ T955] Disk /dev/mmcblk0: 7456 MB, 7818182656 bytes, 15269888 sectors [ 22.230790][ T955] 238592 cylinders, 4 heads, 16 sectors/track [ 22.230790][ T955] Units: sectors of 1 * 512 = 512 bytes [ 22.230790][ T955] [ 22.230790][ T955] Device Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type [ 22.230790][ T955] /dev/mmcblk0p1 0,1,1 1023,3,16 16 15269887 15269872 7455M 83 Linux QCMAP_Bootup.service: Succeeded. [ 22.314470][ T383] ipa-wan ipa3_wwan_ioctl:4250 dev(rmnet_data0) register to IPA [ 22.327975][ T1011] QCMAP_Bootup kill complete [ 22.372088][ T1027] QCMAP:Start DHCP server [ OK ] Found device /dev/input/event0. [ OK ] Created slice system-dnsmasq_service.slice. Starting dnsmasq service... [ 22.446363][ T1056] Starting DNSMASQ SERVICE arg1: /var/run/data/dnsmasq_env.conf agr2: vlan [ 22.459277][ T1056] launching dnsmasq for tpie vlan inst [ OK ] Started dnsmasq service.[ 22.478510][ T905] mmcblk0 status: 1 [ 22.549648][ T1096] QCMAP:DHCP server started [ 22.579603][ T1104] Found mmcblk0p1 add [ 22.583835][ T1104] Trying to mount mmcblk0p1 at : /mnt/internal_storage [ 22.598996][ T1117] device bridge0 entered promiscuous mode [ OK ] Started Bind mount volatile /etc/data/. [ 22.634484][ T1122] EXT4-fs (mmcblk0p1): VFS: Can't find ext4 filesystem [ OK ] Reached target Basic System. [ OK ] Started Create overlays fo…ls, /var/lib/selinux in /data. [ OK ] Started adpl service. [ OK ] Started Atfwd_daemon Service. [ 22.666658][ T1104] Failed to mount ext4 mmcblk0p1 to : /mnt/internal_storage status:32 Starting Bluetooth Power Service... Starting System Logging Service... Starting NTP client/server... [ OK ] Started CV2X Daemon Service. [ OK ] Started data-init service. [ OK ] Started EMAC_IOSS. [ OK ] Started Getty on tty1. [ 22.734897][ T1165] bt_dt_parse_vreg_info: qcom,bt-vdd-ctrl2 is not provided in device tree Starting init-can Service... [ 22.764674][ T1165] bt-sw-ctrl-gpio not provided in devicetree [ 22.770763][ T1165] bt-debug-gpio not provided in devicetree [ 22.782393][ T1165] xo-clk-gpio not provided in devicetree [ 22.792669][ T1166] (NULL device *): ioss:cfg:IOSS version 0x1000000, API version 6 [ 22.794646][ T1165] bt_dt_parse_clk_info: clocks is not provided in device tree Starting Audio Init Service... [ 22.833197][ T1165] bt_power_populate_dt_pinfo: clock not provided in device tree [ 22.858427][ T1181] cnss2 script called from: atrdemo [ 22.858538][ T1181] start to load cnss2 [ 22.863304][ T1189] CDI: Init func for CDI [ 22.873190][ T1166] (NULL device *): ioss:cfg:Root device probe completed [ 22.880250][ T57] (NULL device *): ioss:cfg:IPA is ready [ 22.886864][ T57] (NULL device *): ioss:cfg:Starting PCI Starting MODPROBE_CNSS2_MODULE... [ 22.901464][ T1177] audio:start/load Starting IPv6 Packet Filtering Framework... [ 22.930432][ T1166] (NULL device *): ioss:cfg:Registering Platform driver qcom-ethqos_ioss [ 22.958244][ T1165] btpower_aop_mbox_init: failed to get mbox channel Starting IPv4 Packet Filtering Framework... Starting logd logging service... [ 23.041281][ T1166] qcom-ethqos_ioss 23040000.qcom,emac0-ioss: ioss:cfg:(eth0) addr: , driver: st_xgmac Jan_2016, firmware: , erom: [ OK ] Started Load mvm dlkm service. Starting Port bridge Service... [ 23.073809][ T1166] qcom-ethqos_ioss 23040000.qcom,emac0-ioss: ioss:cfg:(eth0) creating dev char device for auto platform [ 23.073809][ T1166] Starting Load qcedev dlkm service... [ 23.105656][ T1192] cnss: Failed to get mbox channel [ OK ] Started Modem Shutdown Service. [ OK ] Started Load qrng dlkm service. [ OK ] Started reboot-daemon service. [ OK ] Started Serial Getty on ttyMSM0. [ OK ] Reached target Login Prompts. [ 23.147162][ T52] cnss: QMI DMS service connected, state: 0x100000 Starting Load smcinvoke dlkm service... [ 23.188333][ T1210] mvm 10000000.qcom,mvm: Adding to iommu group 15 [ 23.198799][ T1192] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. [ 23.208337][ T1231] netlink: 8 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 23.214624][ T1192] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 23.229582][ T1233] QCMAP:Netlink Query to Kernel Success [ 23.231143][ T1210] mvm 10000000.qcom,mvm: The current state of MVM is OFFLINE [ 23.249443][ T1192] pcie_phy_init: PCIe RC2 PHY is ready! Starting ssgtzd Service... [ 23.269080][ T1192] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ OK ] Started Telux Config Server. [ 23.283493][ T1210] mvm 10000000.qcom,mvm: MVM GSDC powered up [ 23.290028][ T1235] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:spf_core:1:3 [ 23.303818][ T1229] smcinvoke:start/load [ OK ] Started Telux Thermal Server. Starting Thermal Engine Service... [ OK ] Started Throttle Manager Service. Starting time serviced Service... [ 23.330145][ T1235] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:audio-pkt:1:17 [ 23.342016][ T1192] msm_pcie_link_train: PCIe RC2 link initialized [ 23.348625][ T1192] pci-msm 1c10000.qcom,pcie: host bridge /soc/qcom,pcie@1c10000 ranges: [ 23.348651][ T1192] pci-msm 1c10000.qcom,pcie: No bus range found for /soc/qcom,pcie@1c10000, using [bus 00-ff] [ 23.348692][ T1192] pci-msm 1c10000.qcom,pcie: MEM 0x006c200000..0x006fffffff -> 0x006c200000 [ 23.350103][ T1192] pci-msm 1c10000.qcom,pcie: MSI: synopsys controller is present [ 23.350814][ T1192] pci-msm 1c10000.qcom,pcie: PCI host bridge to bus 0002:00 [ OK ] Started Load tz_log dlkm service. [ 23.350826][ T1192] pci_bus 0002:00: root bus resource [bus 00-ff] [ 23.350834][ T1192] pci_bus 0002:00: root bus resource [mem 0x6c200000-0x6fffffff] [ 23.350965][ T1192] pci 0002:00:00.0: [17cb:0309] type 01 class 0x060400 [ 23.355797][ T1235] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: Adding GPR dev: gprsvc:audio_prm:1:7 [ 23.356194][ T21] audio_notifier_reg_service: service SSR_MODEM is in use [ 23.356201][ T21] gpr_modem_up: called [ 23.356207][ T21] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: gpr_notifier_register: registered via subsys_notif_register for domain id(1) [ 23.356534][ T1235] qcom,gpr 4080000.remoteproc-mss:glink-edge.modem_apps.-1.-1: gpr_probe: gpr-lite probe success [ 23.372180][ T1236] ssgtzd Service started [ 23.408201][ T1192] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [ 23.434344][ T1210] mvm 10000000.qcom,mvm: MVM subsystem brought out of reset [ 23.485060][ T1192] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 23.495631][ T1192] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ OK ] Started Bluetooth Power Service. [ 23.524163][ T1192] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ OK ] Started System Logging Service. [ OK ] Started NTP client/server. data-init.service: Succeeded. [ 23.537596][ T1192] pci 0002:01:00.0: [17cb:1103] type 00 class 0x028000 [ OK ] Started init-can Service. [ 23.540072][ T1210] mvm 10000000.qcom,mvm: The current state of MVM is ONLINE [ OK ] Started IPv6 Packet Filtering Framework. [ 23.569289][ T1192] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ OK ] Started IPv4 Packet Filtering Framework. [ 23.587014][ T1210] mvm 10000000.qcom,mvm: mvm_stats device created [ 23.589340][ T153] tz_log_dlkm:[tzdbg_get_tz_version][1724]: tz diag version is 2404000 [ 23.592243][ T1192] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 23.592487][ T1192] pci 0002:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0002:00:00.0 (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link) [ 23.600269][ T1210] gcc-sdxpinn 80000.clock-controller: sync-state [ 23.615701][ T1192] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01 [ 23.627828][ T153] tz_log_dlkm:[tzdbg_query_encrypted_log][1758]: encrypted qseelog enabled is 0 [ 23.641743][ T1192] pci 0002:00:00.0: BAR 8: assigned [mem 0x6c200000-0x6c3fffff] [ OK ] Started Port bridge Service. [ 23.663012][ T153] tz_log_dlkm:[tzdbg_init_tme_log][1412]: Tme Crashdump address offset need to be defined! [ OK ] Started Load qcedev dlkm service. [ 23.675147][ T153] tz_log_dlkm:[tz_log_probe][1880]: Tme log initialization failed! [ 23.680570][ T1257] spf_core_platform_driver_probe [ 23.690443][ T1257] spf_core_probe [ 23.698277][ T21] spf_core_add_child_devices:enumarate machine driver [ 23.712009][ T1192] pci 0002:00:00.0: BAR 9: assigned [mem 0x6c400000-0x6c5fffff 64bit pref] ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 23.723621][ T1192] pci 0002:00:00.0: BAR 1: assigned [mem 0x6c600000-0x6c60ffff] [ 23.737386][ T1210] insmod (1210) used greatest stack depth: 9120 bytes left [ 23.737456][ T387] mtdblock: MTD device 'sbl' is NAND, please consider using UBI block devices instead. [ 23.737993][ T1192] pci 0002:00:00.0: BAR 0: assigned [mem 0x6c610000-0x6c610fff] [ 23.738015][ T1192] pci 0002:00:00.0: BAR 7: no space for [io size 0x1000] [ 23.738020][ T1192] pci 0002:00:00.0: BAR 7: failed to assign [io size 0x1000] [ 23.738036][ T1192] pci 0002:01:00.0: BAR 0: assigned [mem 0x6c200000-0x6c3fffff 64bit] [ 23.738136][ T1192] pci 0002:00:00.0: PCI bridge to [bus 01] [ 23.738166][ T1192] pci 0002:00:00.0: bridge window [mem 0x6c200000-0x6c3fffff] [ 23.738188][ T1192] pci 0002:00:00.0: bridge window [mem 0x6c400000-0x6c5fffff 64bit pref] [ 23.755036][ T1242] write to ipa devnode ssgtzd.service: Failed with result 'exit-code'. [ 23.812498][ T1192] mhi 0002:00:00.0: Adding to iommu group 16 [ 23.823717][ T21] spf-core-platform soc:spf_core_platform: __spf_core_is_apm_ready: send_command ret [ 23.833750][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: Payload 2001007 [ 23.842170][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: sucess response received [ 23.842844][ T21] spf-core-platform soc:spf_core_platform: spf_core_add_child_devices: apm is up [FAILED] Failed to start ssgtzd Service.[ 23.861862][ T1192] mhi 0002:00:00.0: BAR 0: assigned [mem 0x6c610000-0x6c610fff] See 'systemctl status ssgtzd.service' for details. [ 23.865103][ T1268] qce 1de0000.qcedev: Adding to iommu group 17 [ 23.885462][ T1192] mhi 0002:00:00.0: enabling device (0000 -> 0002) [ 23.901231][ T1268] qcedev_probe_device: No icc avg BW set, using default [ OK ] Found device /dev/binder. [ 23.908859][ T1268] qcedev_probe_device: No icc peak BW set, using default [ OK ] Reached target Network (Pre). [ 23.921811][ T1272] audio_prm_probe: prm probe success [ 23.939289][ T1268] QCE50: __qce_get_device_tree_data: CE operating frequency is not defined, setting to default 100MHZ Starting Chrony Sock Source... [ 23.952242][ T1268] qce 1de0000.qcedev: QTI Crypto 5.7.0 device found @0x1de0000 [ 23.966070][ T1268] sps_register_bam_device: sps:BAM 0x0000000001dc4000 is registered [ 23.974686][ T1268] sps_bam_enable: sps:BAM 0x0000000001dc4000 (va:0x0000000000000000) enabled: ver:0x28, number of pipes:20 [ 23.975673][ T1192] [E][mhi_arch_pcie_init] No interconnect name specified [ 23.987393][ T1268] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 21 [ 24.033975][ T1268] qce 1de0000.qcedev:qcom_cedev_ns_cb: Adding to iommu group 17 [ 24.041924][ T64] mvm 10000000.qcom,mvm: MVM License file is read and the max rate supported by MVM is 0 [ 24.053373][ T381] mtdblock: MTD device 'tz' is NAND, please consider using UBI block devices instead. [ 24.072203][ T1192] mhi: probe of 0002:00:00.0 failed with error -2 [ 24.072869][ T1295] msm-audio-ion soc:qcom,msm-audio-ion: msm_audio_ion_probe: msm_audio_ion_probe [ 24.098084][ T65] msm_pcie_enumerate: PCIe: RC2: has already been enumerated. [ 24.131730][ T1192] cnss_pci 0002:01:00.0: Adding to iommu group 18 [ 24.153925][ T391] mtdblock: MTD device 'sbl_b' is NAND, please consider using UBI block devices instead. [ 24.176613][ T1192] cnss_pci 0002:01:00.0: assigned reserved memory node cnss_wlan_region [ 24.181188][ T389] mtdblock: MTD device 'misc' is NAND, please consider using UBI block devices instead. [ 24.185235][ T382] mtdblock: MTD device 'apdp' is NAND, please consider using UBI block devices instead. [ 24.200146][ T388] mtdblock: MTD device 'tz_devcfg' is NAND, please consider using UBI block devices instead. [ 24.200256][ T381] mtdblock: MTD device 'keystore' is NAND, please consider using UBI block devices instead. [ OK ] Started powermanager-daemon Service. [ 24.229377][ T386] mtdblock: MTD device 'keymaster' is NAND, please consider using UBI block devices instead. [ OK ] Started ethpwrmgr service. [ 24.249742][ T1192] cnss_pci 0002:01:00.0: BAR 0: assigned [mem 0x6c200000-0x6c3fffff 64bit] [ OK ] Started Service manager Service. [ 24.259536][ T1192] cnss_pci 0002:01:00.0: enabling device (0000 -> 0002) [ 24.265492][ T381] mtdblock: MTD device 'cmnlib64' is NAND, please consider using UBI block devices instead. [ 24.308897][ T1178] cv2x-daemon: Starting CV2X Daemon Service [ 24.332202][ T387] mtdblock: MTD device 'mibib' is NAND, please consider using UBI block devices instead. [ 24.340468][ T391] mtdblock: MTD device 'xbl_ramdump' is NAND, please consider using UBI block devices instead. [ 24.367588][ T385] mtdblock: MTD device 'multi_oem' is NAND, please consider using UBI block devices instead. [ 24.370414][ T391] mtdblock: MTD device 'multi_qti' is NAND, please consider using UBI block devices instead. [ 24.398597][ T382] mtdblock: MTD device 'aop_devcfg' is NAND, please consider using UBI block devices instead. [ 24.426756][ T644] netlink: 4 bytes leftover after parsing attributes in process `QCMAP_Connectio'. [ 24.438845][ T1367] QCMAP: Received Resume State [ 24.449823][ T386] mtdblock: MTD device 'qhee' is NAND, please consider using UBI block devices instead. [ 24.450055][ T391] mtdblock: MTD device 'xbl_config' is NAND, please consider using UBI block devices instead. [ 24.462011][ T1369] QCMAP: Interface Up for eth0 [ 24.476445][ T1370] QCMAP:Netlink Query to Kernel Success [ 24.488792][ T384] mtdblock: MTD device 'abl' is NAND, please consider using UBI block devices instead. [ 24.499180][ T1192] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC2. [ 24.507946][ T1192] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC2. [ 24.514022][ T391] mtdblock: MTD device 'qupfw' is NAND, please consider using UBI block devices instead. [ 24.525107][ T1192] msm_pcie_enable: PCIe: RC2: PCIE20_PARF_INT_ALL_MASK: 0x7f80d202 [ 24.536031][ T1192] pcie_phy_init: PCIe RC2 PHY is ready! [ 24.543798][ T1390] cv2x-daemon: Initializing Data subsytem [ 24.553078][ T1192] msm_pcie_enable: PCIe: Release the reset of endpoint of RC2. [ 24.567091][ T1391] QCMAP: Eth SW-IP filter count: 0 for iface: eth0 [ OK ] Started Load smcinvoke dlkm service.[ 24.579367][ T1192] msm_pcie_link_train: PCIe RC2 link initialized [ OK ] Started time serviced Service. [ OK ] Started logd logging service. [ 24.596356][ T1398] QCMAP: DSI Init Callback Received dsi_mode:5 [ OK ] Started Chrony Sock Source. [ 24.606891][ T388] mtdblock: MTD device 'uefi' is NAND, please consider using UBI block devices instead. ssgtzd.service: Scheduled restart job, restart counter is at 1. [ 24.617151][ T381] mtdblock: MTD device 'aop' is NAND, please consider using UBI block devices instead. [ 24.625161][ T1192] (NULL device *): ioss:cfg:Adding device 0002:01:00.0 [ 24.646277][ T1192] ioss 0002:01:00.0-ioss: ioss:ERR:(0002:01:00.0) Failed to register device with ioss bus Starting sensor remote service launcher... [ OK ] Started Ril Daemon. [ 24.663720][ T1412] QCMAP:Enable mobileap [ 24.671915][ T1192] cnss: Platform driver probed successfully. [ 24.672478][ T384] mtdblock: MTD device 'shrm' is NAND, please consider using UBI block devices instead. rild2.service: Ignoring invalid environment assignment 'persist.radio.mt_sms_ack=30': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'tel.disable_ind=0x1': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'data.disable_ind_during_suspend=0x0000000F': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'sensor.disable_ind_during_suspend=0x01': /etc/tel.conf rild2.service: Ignoring invalid environment assignment 'loc.disable_ind_during_suspend=0x01': /etc/tel.conf [ 24.733853][ T392] mtdblock: MTD device 'cpucpfw' is NAND, please consider using UBI block devices instead. Starting Rild2 Launcher... [ 24.766135][ T1424] QCMAP:Enable mobileap done [ 24.772677][ T392] mtdblock: MTD device 'dtbo' is NAND, please consider using UBI block devices instead. [ OK ] Started Rilmuxd Daemon. [ OK ] Stopped ssgtzd Service. [ 24.806313][ T1426] QCMAP: DSD service available [ 24.846638][ T387] mtdblock: MTD device 'tz_b' is NAND, please consider using UBI block devices instead. [ 24.861370][ T391] mtdblock: MTD device 'efs_backup' is NAND, please consider using UBI block devices instead. Starting ssgtzd Service... [ 24.890337][ T389] mtdblock: MTD device 'boot' is NAND, please consider using UBI block devices instead. rild2.service: Succeeded. [ 24.903097][ T381] mtdblock: MTD device 'tz_devcfg_b' is NAND, please consider using UBI block devices instead. [ OK ] Started Rild2 Launcher. ssgtzd.service: Main process exited, code=exited, status=203/EXEC rilmuxd2.service: Ignoring invalid environment assignment 'persist.radio.mt_sms_ack=30': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'tel.disable_ind=0x1': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'data.disable_ind_during_suspend=0x0000000F': /etc/tel.conf rilmuxd2.service: Ignoring invalid environment assignment 'sensor.disable_ind_during_suspend=0x01': /etc/tel.conf rilmuxd2.service:[ 24.941290][ T381] mtdblock: MTD device 'apdp_b' is NAND, please consider using UBI block devices instead. Ignoring invalid environment assignment 'loc.disable_ind_during_suspend=0x01': /etc/tel.conf Starting Rilmuxd2 Launcher... [ 25.021248][ T386] mtdblock: MTD device 'keymaster_b' is NAND, please consider using UBI block devices instead. rilmuxd2.service: Succeeded. [ 25.094140][ T1390] cv2x-daemon: Data subsytem ready [ OK ] Started Rilmuxd2 Launcher. [ OK ] Started sensor remote service launcher. ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. [ 25.116223][ T1431] ssgtzd Service started See 'systemctl status ssgtzd.service' for details. [ 25.142800][ T381] mtdblock: MTD device 'cmnlib64_b' is NAND, please consider using UBI block devices instead. [ 25.165983][ T384] mtdblock: MTD device 'xbl_config_b' is NAND, please consider using UBI block devices instead. [ 25.166124][ T389] mtdblock: MTD device 'multi_qti_b' is NAND, please consider using UBI block devices instead. [ 25.189149][ T387] mtdblock: MTD device 'xbl_ramdump_b' is NAND, please consider using UBI block devices instead. [ 25.204261][ T382] mtdblock: MTD device 'efs2' is NAND, please consider using UBI block devices instead. [ 25.217288][ T392] mtdblock: MTD device 'multi_oem_b' is NAND, please consider using UBI block devices instead. [ 25.250629][ T391] mtdblock: MTD device 'aop_b' is NAND, please consider using UBI block devices instead. [ 25.267402][ T385] mtdblock: MTD device 'aop_devcfg_b' is NAND, please consider using UBI block devices instead. [ 25.267951][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc ssgtzd.service: Scheduled restart job, restart counter is at 2. [ OK ] Stopped ssgtzd Service. Starting ssgtzd Service... [ 25.297079][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc sensor_hal_daemon.service: Succeeded. [ 25.315939][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 25.331652][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.345716][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.354822][ T1401] sdx-asoc-snd soc:sound-auto: control 2:0:0:MI2S Mode:0 is already present [ 25.365491][ T1401] tlv320aic32x4 2-0018: ASoC: Failed to add MI2S Mode: -16 [ 25.372801][ T1401] msm_int_audrx_init: add_codec_controls failed, -16 [ 25.379820][ T384] mtdblock: MTD device 'abl_b' is NAND, please consider using UBI block devices instead. [ 25.389053][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.398959][ T386] mtdblock: MTD device 'uefi_b' is NAND, please consider using UBI block devices instead. [ 25.401378][ T387] mtdblock: MTD device 'shrm_b' is NAND, please consider using UBI block devices instead. [ 25.411157][ T1485] ssgtzd Service started [ 25.421084][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc ssgtzd.service: Failed with result 'exit-code'.[ 25.437099][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.450362][ T1401] sdx-asoc-snd soc:sound-auto: control 2:0:0:MI2S Mode:0 is already present [ 25.456223][ T381] mtdblock: MTD device 'qhee_b' is NAND, please consider using UBI block devices instead. [FAILED] Failed to start ssgtzd Service. [ 25.477020][ T1401] msm-stub-codec soc:qcom,msm-stub-codec: ASoC: Failed to add MI2S Mode: -16 See 'systemctl status ssgtzd.service' for details. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 1. [ OK ] Stopped sensor remote service launcher. [ 25.482806][ T389] mtdblock: MTD device 'qupfw_b' is NAND, please consider using UBI block devices instead. [ 25.493464][ T1401] msm_int_audrx_init: add_codec_controls failed, -16 Starting sensor remote service launcher... [ 25.533050][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.542175][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.558132][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.562513][ T392] mtdblock: MTD device 'boot_b' is NAND, please consider using UBI block devices instead. [ 25.567366][ T384] mtdblock: MTD device 'cpucpfw_b' is NAND, please consider using UBI block devices instead. [ 25.569072][ T388] mtdblock: MTD device 'dtbo_b' is NAND, please consider using UBI block devices instead. [ 25.581056][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.606729][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.615847][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ OK ] Started Thermal Engine Service. [ 25.628140][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc ssgtzd.service: Scheduled restart job, restart counter is at 3. [ OK ] Stopped ssgtzd Service. [ 25.646862][ T389] mtdblock: MTD device 'ddr' is NAND, please consider using UBI block devices instead. [ 25.647958][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc Starting ssgtzd Service... ssgtzd.service: Main process exited, code=exited, status=203/EXEC [ 25.676892][ T386] mtdblock: MTD device 'system' is NAND, please consider using UBI block devices instead. [ 25.692003][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.701348][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.713178][ T1509] ssgtzd Service started [ 25.713504][ T385] mtdblock: MTD device 'sec' is NAND, please consider using UBI block devices instead. [ 25.723462][ T392] mtdblock: MTD device 'recoveryinfo' is NAND, please consider using UBI block devices instead. [ 25.733305][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.747208][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ 25.780329][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.785826][ T384] mtdblock: MTD device 'devinfo' is NAND, please consider using UBI block devices instead. [ 25.801121][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.801660][ T391] systemd-udevd[391]: Using default interface naming scheme 'v243'. [ 25.810454][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.828310][ T1513] \n changing permission on radio:radio /dev/mtd7 (user:group) [ 25.830216][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.847981][ T1401] msm_register_pm_qos_latency_controls: could not find component for lpass-cdc [ 25.887554][ T1401] sdx-asoc-snd soc:sound-auto: msm_asoc_machine_probe: Sound card sdx-auto-i2s-snd-card registered [ 25.898575][ T1401] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for tdm max slots [ 25.898584][ T1401] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: Using default tdm max slot: 8 [ 25.898600][ T1401] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for tdm clk attribute, set to default [ OK ] Started sensor remote service launcher.[ 25.898604][ T1401] sdx-asoc-snd soc:sound-auto: msm_common_snd_init: No DT match for mi2s clk attribute, set to default [ 25.898615][ T1401] sdx-asoc-snd soc:sound-auto: num_links 22 [ 25.905034][ T1401] sdx-asoc-snd soc:sound-auto: sdx_ssr_enable: setting snd_card to ONLINE ssgtzd.service: Scheduled restart job, restart counter is at 4. [ OK ] Stopped ssgtzd Service. Starting ssgtzd Service... sensor_hal_daemon.service: Succeeded. [ 25.978218][ T1548] ssgtzd Service started [ 25.983122][ T389] mtdblock: MTD device 'emac' is NAND, please consider using UBI block devices instead. [ OK ] Started Audio Init Service. ssgtzd.service: Main process exited, code=exited, status=203/EXEC ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. Starting Agm Server Init... sensor_hal_daemon.service: Scheduled restart job, restart counter is at 2. ssgtzd.service: Scheduled restart job, restart counter is at 5. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... [ OK ] Stopped ssgtzd Service. ssgtzd.service: Start request repeated too quickly. ssgtzd.service: Failed with result 'exit-code'. [FAILED] Failed to start ssgtzd Service. See 'systemctl status ssgtzd.service' for details. [ OK ] Started Agm Server Init. [ OK ] Started Telux Audio Server. [ OK ] Started sensor remote service launcher. [ OK ] Found device /dev/smcinvoke. Starting Qseecomd Service... sensor_hal_daemon.service: Succeeded. [ OK ] Reached target Sound Card. [ OK ] Started Qseecomd Service. Starting Qwesd Service... [ OK ] Started sfs configuration Service. [ 26.488823][ T1639] Creating QWES LICENSE STORE : /persist/data/pfm/licenses/ [ 26.506567][ T1640] SFS configuration started. [ 26.526763][ T1640] SFS configuration completed. [ OK ] Started Tsens Service. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 3. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... [ 26.589686][ T1668] Creating qwes_ipc [ OK ] Started Qwesd Service. [ 26.635595][ T1683] Qwesd Service Completed [ 26.673857][ T1690] smcinvoke: process_accept_req: Setting pid:1690, server id : 17 state to defunct [ 26.688307][ T1689] smcinvoke: process_accept_req: Setting pid:1689, server id : 17 state to defunct [ 26.708123][ T1688] smcinvoke: process_accept_req: Setting pid:1688, server id : 17 state to defunct [ OK ] Started sensor remote service launcher. [ OK ] Started GPS Location process launcher. [ 26.727070][ T1687] smcinvoke: process_accept_req: Setting pid:1687, server id : 17 state to defunct Starting location remote service launcher... sensor_hal_daemon.service: Succeeded. [ OK ] Started location remote service launcher. [ OK ] Started Location App. [ 27.078613][ T1419] qca6490: Loading driver v5.2.1.43M +PANIC_ON_BUG; cld:; cmn:; dev:wlan [ 27.095010][ T153] cnss: PCI link is already resumed sensor_hal_daemon.service: Scheduled restart job, restart counter is at 4. [ OK ] Stopped sensor remote service launcher. Starting sensor remote service launcher... [ OK ] Started sensor remote service launcher. sensor_hal_daemon.service: Succeeded. [ 27.280301][ T1787] smcinvoke: process_accept_req: Setting pid:1787, server id : 26 state to defunct [ 27.290248][ T1786] smcinvoke: process_accept_req: Setting pid:1786, server id : 26 state to defunct [ 27.301112][ T1785] smcinvoke: process_accept_req: Setting pid:1785, server id : 26 state to defunct [ 27.317108][ T1784] smcinvoke: process_accept_req: Setting pid:1784, server id : 26 state to defunct throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. sensor_hal_daemon.service: Scheduled restart job, restart counter is at 5. [ OK ] Stopped sensor remote service launcher. sensor_hal_daemon.service: Start request repeated too quickly. sensor_hal_daemon.service: Failed with result 'start-limit-hit'. [FAILED] Failed to start sensor remote service launcher. See 'systemctl status sensor_hal_daemon.service' for details. [ 27.481757][ T1748] smcinvoke: process_accept_req: Setting pid:1748, server id : 24 state to defunct [ 27.491863][ T1747] smcinvoke: process_accept_req: Setting pid:1747, server id : 24 state to defunct [ 27.538261][ T1803] smcinvoke: prepare_send_scm_msg: Secure side is busy,will retry after 30 ms, retry_count = 0 [ 27.585058][ T1803] smcinvoke: smcinvoke_release_tz_object: Failed to release object(0x2), ret:-16 throttleman.service: Scheduled restart job, restart counter is at 1. [ 27.756353][ T1806] smcinvoke: prepare_send_scm_msg: Secure side is busy,will retry after 30 ms, retry_count = 0 [ 27.801173][ T1806] smcinvoke: smcinvoke_release_tz_object: Failed to release object(0x9), ret:-16 throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. throttleman.service: Scheduled restart job, restart counter is at 2. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. throttleman.service: Scheduled restart job, restart counter is at 3. throttleman.service: Main process exited, code=exited, status=1/FAILURE throttleman.service: Failed with result 'exit-code'. [ 28.692753][ T153] cnss: QMI WLFW service connected, state: 0x4d06011 [ 28.764230][ T153] cnss: TCS CMD not configured for IPA Vreg enable [ 28.770830][ T153] cnss: Host BDF config: HW_XPA: 0 CalDB: 0 QTI Linux Telematics distro with debug capabilities. android-1.0-25-g42ad0b88 sa525m ttyMSM0 sa525m login: [ 28.802700][ T153] cnss: Qmi fail: respons with error:94 chrony-sock.service: Scheduled restart job, restart counter is at 1. [ 28.808353][ T153] cnss: Qmi fail: request rejected, req 55, ret -1 [ 28.821279][ T153] cnss: pcss recovery setting failed with ret -1 throttleman.service: Scheduled restart job, restart counter is at 4.[ 28.828078][ T153] cnss: QMI_DMS_GET_MAC_ADDRESS_REQ_V01 failed, result: 1, err: 16 [ 28.876328][ T153] [kworke][0x26dc9062][00:00:04.232732] wlan: [153:I:HIF] hif_pci_enable_bus: con_mode = 0x0, WLAN_SOC_device_id = 0x1103 [ 28.889312][ T153] [kworke][0x26e05e60][00:00:04.245718] wlan: [153:I:HIF] hif_pci_get_soc_info_pld: hif_pci_get_soc_info_pld: fam num 4 dev ver 12 maj ver 2 min ver 16 [ 28.889312][ T153] [ 28.907131][ T153] [kworke][0x26e596cb][00:00:04.263537] wlan: [153:I:HIF] hif_pci_enable_bus: hif_enable_pci done [ 28.921815][ T153] [kworke][0x26e9e3ee][00:00:04.278219] wlan: [153:I:HIF] hif_get_device_type: *********** QCA6490 ************* [ 28.934450][ T153] [kworke][0x26ed97a7][00:00:04.290855] wlan: [153:I:HIF] hif_pci_enable_bus: hif_type = 0x16, target_type = 0x1b [ 28.946916][ T153] [kworke][0x26f13e7f][00:00:04.303320] wlan: [153:I:HIF] hif_register_tbl_attach: HIF_TYPE_QCA6490 [ 28.958438][ T153] [kworke][0x26f49ea1][00:00:04.314842] wlan: [153:I:HIF] hif_target_register_tbl_attach: TARGET_TYPE_QCA6490 [ 28.970334][ T153] [kworke][0x26f81813][00:00:04.326701] wlan: [153:I:HIF] hif_pci_enable_bus: Skip tgt_wake up for srng devices [ 28.982824][ T153] [kworke][0x26fbc3f0][00:00:04.339232] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: v2: num_config 27 [ 28.994851][ T153] [kworke][0x26ff498a][00:00:04.351253] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 0, val a3b034 [ 29.006637][ T153] [kworke][0x2702bdd7][00:00:04.363044] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 1, val a3b03c [ 29.018370][ T153] [kworke][0x27062dd9][00:00:04.374777] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 2, val a3b044 [ 29.030119][ T153] [kworke][0x27099f01][00:00:04.386526] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 3, val a3b04c [ 29.042019][ T153] [kworke][0x270d1b8a][00:00:04.398427] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 4, val a3b064 [ 29.053867][ T153] [kworke][0x2710940a][00:00:04.410273] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 5, val a3b028 [ 29.066144][ T153] [kworke][0x27142cce][00:00:04.422551] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 6, val a3b020 [ 29.078007][ T153] [kworke][0x2717a696][00:00:04.434414] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 7, val a3b07c throttleman.service: Main process exited, code=exited, status=1/FAILURE[ 29.089878][ T153] [kworke][0x271b20c4][00:00:04.446283] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 8, val a46000 [ 29.109095][ T153] [kworke][0x2720bed5][00:00:04.465457] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 9, val a46008 throttleman.service: Failed with result 'exit-code'.[ 29.120898][ T153] [kworke][0x272436f9][00:00:04.477299] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 10, val a46010 [ 29.139037][ T153] [kworke][0x272987d2][00:00:04.495444] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 11, val a46018 [ 29.150859][ T153] [kworke][0x272cfe89][00:00:04.507266] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 12, val a46034 [ 29.162866][ T153] [kworke][0x27308302][00:00:04.519273] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 13, val a370b0 chrony-sock.service: Main process exited, code=exited, status=234/n/a [ 29.174736][ T153] [kworke][0x2733fd3d][00:00:04.531143] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 14, val a37018 [ 29.194034][ T153] [kworke][0x2739a49b][00:00:04.550441] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 15, val a370c4 chrony-sock.service: Failed with result 'exit-code'.[ 29.205905][ T153] [kworke][0x273d1eee][00:00:04.562312] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 16, val a370cc [ 29.223988][ T153] [kworke][0x27426b29][00:00:04.580395] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 17, val a370d4 [ 29.235991][ T153] [kworke][0x2745ef52][00:00:04.592397] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 18, val a370dc [ 29.247820][ T153] [kworke][0x27496689][00:00:04.604227] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 19, val a370e4 [ 29.259646][ T153] [kworke][0x274cdd97][00:00:04.616054] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 20, val 1b80400 [ 29.271554][ T153] [kworke][0x27505ab0][00:00:04.627962] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 21, val 1b83400 [ 29.283473][ T153] [kworke][0x2753d887][00:00:04.639880] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 22, val 1b8340c [ 29.295423][ T153] [kworke][0x275758ca][00:00:04.651830] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 23, val 1b85400 [ 29.307334][ T153] [kworke][0x275ad623][00:00:04.663741] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 24, val 1b8540c [ 29.319281][ T153] [kworke][0x275e5619][00:00:04.675688] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 25, val 1b86400 [ 29.331191][ T153] [kworke][0x2761d363][00:00:04.687598] wlan: [153:I:HIF] hif_print_hal_shadow_register_cfg: i 26, val 1b88400 [ 29.372349][ T153] [kworke][0x276de249][00:00:04.728756] wlan: [153:I:HIF] hif_configure_irq: E [ 29.382277][ T153] wlan_pld:pld_is_ipa_offload_disabled:3344:: Not supported on type 0 [ 29.390687][ T153] [kworke][0x277341a5][00:00:04.747095] wlan: [153:E:POLICY_MGR] policy_mgr_init_cfg: max_conc_cxns 3 non-nan throttleman.service: Scheduled restart job, restart counter is at 5. [ 29.402936][ T153] [kworke][0x2776d84c][00:00:04.759343] wlan: [153:E:QDF] __cds_get_context: Module ID 66 context is Null (via hdd_update_ol_config) [ 29.422970][ T153] [kworke][0x277cb6e9][00:00:04.779378] wlan: [153:E:HDD] hdd_wlan_start_modules: WBUFF init unsuccessful; status: 11 chrony-sock.service: Scheduled restart job, restart counter is at 2. throttleman.service: Start request repeated too quickly. throttleman.service: Failed with result 'exit-code'. [ 29.450810][ T153] [kworke][0x2784ded8][00:00:04.807217] wlan: [153:E:QDF] __cds_get_context: Module ID 66 context is Null (via cds_open) [ 29.477582][ T153] [kworke][0x278cb65f][00:00:04.833985] wlan: [153:F:WMA] WMA --> wmi_unified_attach - success [ 29.492402][ T153] [kworke][0x27910e06][00:00:04.848807] wlan: [153:E:QDF] htc_wait_target: Target Ready! TX resource : 1 size:2176, MaxMsgsPerHTCBundle = 1 [ 29.506933][ T153] [kworke][0x27954ff4][00:00:04.863339] wlan: [153:E:QDF] htc_setup_target_buffer_assignments: SVS Index : 1 TX : 0x100 : alloc:1 [ 29.523101][ T153] [kworke][0x279a0c4c][00:00:04.879504] wlan: [153:I:DP] dp_soc_tx_desc_sw_pools_alloc Tx Desc Alloc num_pool = 6, descs = 4096 chrony-sock.service: Main process exited, code=exited, status=234/n/a [ 29.553836][ T153] [kworke][0x27a30dc2][00:00:04.910243] wlan: [153:I:scan] scm_channel_list_db_init: min_freq 5935 max_freq 7115 chrony-sock.service: Failed with result 'exit-code'. [ 29.570711][ T153] [kworke][0x27a7ff64][00:00:04.927118] wlan: [153:I:DP] Peer pool init [ 29.602313][ T57] [kworke][0x27b14198][00:00:04.958720] wlan: [57:I:WMA] wma_rx_service_ready_event: Firmware build version : 11488300 [ 29.615153][ T57] [kworke][0x27b5049d][00:00:04.971561] wlan: [57:I:WMA] wma_rx_service_ready_event: Board id: 0, Board version: 8 0 0 0 1 [ 29.630568][ T57] [kworke][0x27b988b9][00:00:04.986975] wlan: [57:I:WMA] wma_is_dbs_mandatory: MAC0 does not support both bands 2 DBS is mandatory [ 29.644356][ T57] [kworke][0x27bd92da][00:00:05.000764] wlan: [57:I:WMI] extract_hw_bdf_status: BDF VER is 0, FW and BDF ver check skipped [ 29.657363][ T57] [kworke][0x27c16268][00:00:05.013771] wlan: [57:E:TIF] init_deinit_populate_dbs_or_sbs_cap_ext2: Extraction of twt capability failed [ 29.671460][ T57] [kworke][0x27c5833c][00:00:05.027862] wlan: [57:I:WMA] wma_is_dbs_mandatory: MAC0 does not support both bands 2 DBS is mandatory chrony-sock.service: Scheduled restart job, restart counter is at 3. [ 29.954162][ T57] [kworke][0x28185634][00:00:05.310569] wlan: [57:I:WMI] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 [ 29.971653][ T57] [kworke][0x281d760f][00:00:05.328060] wlan: [57:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_offload 1 [ 29.985639][ T57] [kworke][0x28218efe][00:00:05.342046] wlan: [57:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_bangradar_320_support 0 [ 30.000886][ T57] [kworke][0x2826067f][00:00:05.357293] wlan: [57:I:GREEN_AP] wlan_green_ap_pdev_obj_create_notification: Green AP creation successful, green ap ctx: 0000000000000000, pdev: 0000000000000000 [ 30.022856][ T57] [kworke][0x282c7595][00:00:05.379254] wlan: [57:I:REGULATORY] reg_set_band: set band bitmap: 3 [ 30.033664][ T57] [kworke][0x282fa0e9][00:00:05.390071] wlan: [57:I:HDD] hdd_intersect_igmp_offload_setting: fw cap to handle igmp 1 igmp_offload_enable ini 0 [ 30.049056][ T57] [kworke][0x28342350][00:00:05.405463] wlan: [57:I:GREEN_AP] target_if_green_ap_register_egap_event_handler: Set the Enhance Green AP event handler [ 30.064616][ T153] [kworke][0x2838b247][00:00:05.421023] wlan: [153:I:WMA] wma_wait_for_ready_event: FW ready event received chrony-sock.service: Main process exited, code=exited, status=234/n/a [ 30.077400][ T153] [kworke][0x283c711d][00:00:05.433807] wlan: [153:I:SYS] Creating periodic timer for OLBC UPDATE CACHE TIMEOUT [ 30.077400][ T153] chrony-sock.service: Failed with result 'exit-code'. [ 30.098284][ T153] [kworke][0x28428f6b][00:00:05.454691] wlan: [153:E:DP] dp_rxdma_ring_config: pdev_id 0 max_mac_rings 2 [ 30.116643][ T153] [kworke][0x2847f051][00:00:05.473050] wlan: [153:I:HAL] hal_reo_set_err_dst_remap_6490: HWIO_REO_R0_ERROR_DESTINATION_MAPPING_IX_0 0x55555 [ 30.131347][ T153] [kworke][0x284c3eff][00:00:05.487753] wlan: [153:I:HAL] hal_reo_set_err_dst_remap_6490: HWIO_REO_R0_ERROR_DESTINATION_MAPPING_IX_1 0x5555550 [ 30.146262][ T153] [kworke][0x28509dd3][00:00:05.502670] wlan: [153:I:DIRECT_BUF_RX] target_if_direct_buf_rx_register_events: DBR Handler Context 1 [ 30.166485][ T153] [kworke][0x28568a55][00:00:05.522891] wlan: [153:E:fwol] ucfg_fwol_send_get_thermal_stats_cmd: Command Disabled in Ini gThermalStatsTempOffset 5 or not enabled in FW 0 [ 30.184008][ T153] [kworke][0x285bac86][00:00:05.540413] wlan: [153:E:OSIF] os_if_fwol_get_thermal_stats_req: Failed to send get thermal stats cmd to FW, 4 [ 30.198895][ T153] [kworke][0x2860093c][00:00:05.555302] wlan: [153:E:WMI] send_action_oui_cmd_tlv: Invalid action id [ 30.209972][ T153] [kworke][0x28634812][00:00:05.566380] wlan: [153:E:WMI] send_action_oui_cmd_tlv: Invalid action id [ 30.221776][ T153] [kworke][0x2866bd4c][00:00:05.578183] wlan: [153:I:HDD] hdd_initialize_mac_address: using default MAC address [ 30.239734][ T153] [kworke][0x286c0016][00:00:05.596141] wlan: [153:I:HDD] hdd_psoc_idle_timer_start: psoc idle timer is disabled [ 30.241238][ T385] systemd-udevd[385]: Using default interface naming scheme 'v243'. [ 30.260850][ T381] systemd-udevd[381]: Using default interface naming scheme 'v243'. [ 30.263695][ T389] systemd-udevd[389]: Using default interface naming scheme 'v243'. chrony-sock.service: Scheduled restart job, restart counter is at 4. chrony-sock.service: Main process exited, code=exited, status=234/n/a chrony-sock.service: Failed with result 'exit-code'. chrony-sock.service: Scheduled restart job, restart counter is at 5. chrony-sock.service: Start request repeated too quickly. chrony-sock.service: Failed with result 'exit-code'. [ 30.833424][ T2103] [ifconf][0x2919eedf][00:00:06.189831] wlan: [2103:I:DP] 00000000: 03 df b6 26 c5 eb 41 ed 70 23 ed e8 0e 89 97 fb [ 30.845810][ T2103] [ifconf][0x291d8fd2][00:00:06.202217] wlan: [2103:I:DP] 00000010: 2d 5c ff a8 [ 30.854973][ T2103] [ifconf][0x29203f16][00:00:06.211380] wlan: [2103:I:DP] 00000000: 2f 8c 62 14 af de ef cb ac 68 16 c5 54 b4 83 ad [ 30.867323][ T2103] [ifconf][0x2923dd52][00:00:06.223730] wlan: [2103:I:DP] 00000010: 5e d2 c7 a4 d8 dd f4 e6 e9 5c 87 9c e1 97 7e a1 [ 30.879705][ T2103] [ifconf][0x29277df1][00:00:06.236112] wlan: [2103:I:DP] 00000020: e5 22 14 4a a7 91 5d 22 dc 98 b4 e4 [ 30.893055][ T2103] [ifconf][0x292b672c][00:00:06.249462] wlan: [2103:E:HDD] hdd_sysfs_bmiss_create: could not create bmiss sysfs file [ 32.016205][ T2109] process_accept_req: 38 callbacks suppressed [ 32.016218][ T2109] smcinvoke: process_accept_req: Setting pid:2109, server id : 40 state to defunct [ 32.032111][ T2108] smcinvoke: process_accept_req: Setting pid:2108, server id : 40 state to defunct [ 32.041731][ T2107] smcinvoke: process_accept_req: Setting pid:2107, server id : 40 state to defunct [ 32.051389][ T2106] smcinvoke: process_accept_req: Setting pid:2106, server id : 40 state to defunct [ 32.173192][ T2113] smcinvoke: process_accept_req: Setting pid:2113, server id : 41 state to defunct [ 32.182831][ T2112] smcinvoke: process_accept_req: Setting pid:2112, server id : 41 state to defunct [ 32.192437][ T2111] smcinvoke: process_accept_req: Setting pid:2111, server id : 41 state to defunct [ 32.202125][ T2110] smcinvoke: process_accept_req: Setting pid:2110, server id : 41 state to defunct [ 32.787046][ T2117] smcinvoke: process_accept_req: Setting pid:2117, server id : 42 state to defunct [ 32.796683][ T2116] smcinvoke: process_accept_req: Setting pid:2116, server id : 42 state to defunct [ 35.971255][ T2148] [hostap][0x2efb2830][00:00:11.327662] wlan: [2148:E:HDD] __hdd_stop_tsf_sync: Host Target sync has not initialized [ 35.984299][ T2014] [schedu][0x2efefa8c][00:00:11.340706] wlan: [2014:E:DP] dp_rx_flush_rx_cached: txrx_peer NULL!! peer mac_addr(00:03:7f:12:79:9d) [ 35.998056][ T2014] [schedu][0x2f03025b][00:00:11.354464] wlan: [2014:E:DP] dp_tx_flow_pool_unmap_handler: flow pool id: 0 is inactive, ignore unmap [ 36.030045][ T2014] [schedu][0x2f0c6179][00:00:11.386452] wlan: [2014:I:WMA] wma_vdev_detach_callback: vdev del response received for VDEV_0 [ 36.043617][ T2148] [hostap][0x2f105b61][00:00:11.400024] wlan: [2148:E:REGULATORY] reg_run_11d_state_machine: Invalid vdev [ 36.103156][ T2014] [schedu][0x2f21ccca][00:00:11.459563] wlan: [2014:I:OSIF] scan start scan id 40961 [ 36.238917][ T2014] [schedu][0x2f4992e6][00:00:11.595325] wlan: [2014:I:OSIF] vdev 0, scan id 40961 type COMPLETED(1) reason COMPLETED(1) scan found 0 bss [ 36.386817][ T2149] [hostap][0x2f74e761][00:00:11.743224] wlan: [2149:I:HDD] wlan0(vdevid-0): START AP: mode SAP(1) 5745 bw 3 sub20 0 [ 36.404600][ T1860] [kworke][0x2f7a1d11][00:00:11.761007] wlan: [1860:E:OSIF] osif_twt_disable_complete_cb: obsolete request [ 36.406278][ T2014] [schedu][0x2f7a9af0][00:00:11.762685] wlan: [2014:I:WMI] send_vdev_start_cmd_tlv: vdev_id 0 freq 5745 chanmode 18 ch_info: 0x12 is_dfs 0 beacon interval 100 dtim 2 center_chan 5775 center_freq2 0 reg_info_1: 0x1e0000 reg_info_2: 0x1e00, req->max_txpow: 0x1e Tx SS 2, Rx SS 2, ldpc_rx: 0, cac 0, regd 1, HE ops: 1056964876req->dis_hw_ack: 0 [ 36.416208][ T1860] [kworke][0x2f7d83be][00:00:11.772616] wlan: [1860:E:OSIF] osif_twt_disable_complete_cb: obsolete request [ 36.533064][ T2014] [schedu][0x2f9fbfe9][00:00:11.889471] wlan: [2014:E:WMA] wma_sr_update: Spatial Reuse disabled for vdev_id: 0 [ 36.545202][ T2014] [schedu][0x2fa34e50][00:00:11.901610] wlan: [2014:I:HDD] AP started vid 0 freq 5745 BW 2 [ 36.555476][ T139] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 36.560012][ T2149] [hostap][0x2fa7a4de][00:00:11.916418] wlan: [2149:E:SAP] wlansap_is_6ghz_included_in_acs_range: NULL parameters [ 36.561244][ T2014] [schedu][0x2fa80169][00:00:11.917651] wlan: [2014:E:HDD] hdd_tsf_is_initialized: TSF is not initialized [ 36.561253][ T2014] [schedu][0x2fa8021f][00:00:11.917661] wlan: [2014:E:HDD] hdd_get_tsf_cb: tsf is not init, ignore tsf event [ 36.598262][ T26] [kworke][0x2fb2d9bd][00:00:11.954669] wlan: [26:W:TWT] wlan_twt_responder_enable: twt responder ini is not enabled [ 36.610710][ T26] [kworke][0x2fb67eeb][00:00:11.967112] wlan: [26:W:OSIF] osif_twt_responder_enable: Failed to send TWT responder enable command [ 41.079627][ T2156] bridge0: port 1(wlan0) entered blocking state [ 41.085938][ T2156] bridge0: port 1(wlan0) entered disabled state [ 41.093076][ T2156] device wlan0 entered promiscuous mode [ 41.098856][ T2156] bridge0: port 1(wlan0) entered blocking state [ 41.105195][ T2156] bridge0: port 1(wlan0) entered forwarding state [ 41.121864][ T2161] QCMAP: HW Address for dev wlan0: 00:03:7f:12:79:9d [ 41.131410][ T2163] ++++ /etc/init.post_boot.sh -> Starting post boot settings [ 41.171173][ T2163] ++++ /etc/init.post_boot.sh -> Debug SA525M - START [ 41.178379][ T2163] ++++ /etc/init.post_boot.sh -> SA525M target specific debug file [ 41.186514][ T2163] ++++ /etc/init.post_boot.sh -> DCC-Enable START [ 41.254628][ T2163] msm-dcc 240ff000.dcc_v2: DCC list passed 7 [ 41.261554][ T2163] msm-dcc 240ff000.dcc_v2: All values written to enable. [ 41.268810][ T2163] ++++ /etc/init.post_boot.sh -> DCC-Enable END [ 41.291626][ T2163] ++++ /etc/init.post_boot.sh -> ENABLE-FTRACE START [ 41.298529][ T2163] ++++ /etc/init.post_boot.sh -> create_stp_policy START [ 41.322084][ T2163] ++++ /etc/init.post_boot.sh -> create_stp_policy END [ 41.343192][ T2163] ++++ /etc/init.post_boot.sh -> FTRACE-Enable END [ 41.350154][ T2163] ++++ /etc/init.post_boot.sh -> Debug SA525M - END [ 41.357655][ T2163] ++++ /etc/init.post_boot.sh -> post boot settings completed Startup finished in 8.724s (kernel) + 32.969s (userspace) = 41.694s. [ 46.758299][ T2014] [schedu][0x3b536b7e][00:00:22.114694] wlan: [2014:E:QDF] qdf_mc_timer_start: Cannot start timer in state = 21 tx_main_timer_func [qca6490] [ 70.127951][ T57] [kworke][0x5611fffc][00:00:45.484352] wlan: [57:E:REGULATORY] reg_run_11d_state_machine: Invalid vdev [ 76.121716][ T1565] prm_gpr_send_pkt: apm ready check not done [ 76.231205][ T1565] spf-core-platform soc:spf_core_platform: __spf_core_is_apm_ready: send_command ret [ 76.252180][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: Payload 2001007 [ 76.260613][ C0] qcom-spf_core gprsvc:spf_core:1:3: spf_core_callback: sucess response received [ 76.270107][ T1565] prm_gpr_send_pkt: apm ready check done [ 76.278506][ T1565] tlv320aic32x4 2-0018: aic32x4_hw_params() [ 76.284518][ T1565] tlv320aic32x4 2-0018: aic32x4_setup_clocks sample_rate(48000) [ 76.292388][ T1565] tlv320aic32x4 2-0018: aic32x4_set_processing_blocks r_block(1), p_block(1) [ 76.306491][ T1565] tlv320aic32x4 2-0018: aic32x4->fmt(0x0) [ 76.313054][ T1565] tlv320aic32x4 2-0018: Could not set clocks to support sample rate. [ 76.407173][ T1565] tlv320aic32x4 2-0018: aic32x4_mute() [ 85.040613][ T1565] tlv320aic32x4 2-0018: aic32x4_mute() [