
root@am65xx-evm:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.79-gbde58ab01e (oe-user@oe-host) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Thu Dec 20 03:19:19 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: Texas Instruments AM654 Base Board
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] bootconsole [ns16550a0] enabled
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-dma-memory@9b000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-memory@9b100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-dma-memory@9c000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c100000, size 7 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-memory@9c100000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 512 MiB at 0x00000000c0000000
[    0.000000] On node 0 totalpages: 64768
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 32000 pages, LIFO batch:1
[    0.000000]   Normal zone: 32 pages used for memmap
[    0.000000]   Normal zone: 32768 pages, LIFO batch:1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 2 pages/cpu @ffff80087feb0000 s38936 r8192 d83944 u131072
[    0.000000] pcpu-alloc: s38936 r8192 d83944 u131072 alloc=2*65536
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64704
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.ospi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs) root=PARTUUID=0009559b-02 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf9db0000-0xfddb0000] (64MB) mapped at [ffff800079db0000-ffff80007ddaffff]
[    0.000000] Memory: 3529664K/4145152K available (7422K kernel code, 660K rwdata, 2816K rodata, 448K init, 654K bss, 91200K reserved, 524288K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000   (126847 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
[    0.000000]     .rodata : 0xffff0000087c0000 - 0xffff000008a90000   (  2880 KB)
[    0.000000]       .init : 0xffff000008a90000 - 0xffff000008b00000   (   448 KB)
[    0.000000]       .data : 0xffff000008b00000 - 0xffff000008ba5008   (   661 KB)
[    0.000000]        .bss : 0xffff000008ba5008 - 0xffff000008c48a60   (   655 KB)
[    0.000000]     fixed   : 0xffff7fdffe7b0000 - 0xffff7fdffec00000   (  4416 KB)
[    0.000000]     PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7fe000000000 - 0xffff800000000000   (   128 GB maximum)
[    0.000000]               0xffff7fe000000000 - 0xffff7fe002200000   (    34 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800880000000   ( 34816 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000008c00b0000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[    0.000000] CPU0: using LPI pending table @0x00000008c00c0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000006] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.008633] Console: colour dummy device 80x25
[    0.013218] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.023907] pid_max: default: 32768 minimum: 301
[    0.028757] Security Framework initialized
[    0.033009] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.039892] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.063314] ASID allocator initialised with 32768 entries
[    0.068953] Hierarchical SRCU implementation.
[    0.081535] PCI/MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.089934] Platform MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.106520] smp: Bringing up secondary CPUs ...
[    0.139649] Detected VIPT I-cache on CPU1
[    0.139686] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[    0.139733] CPU1: using LPI pending table @0x00000008c0360000
[    0.139778] CPU1: Booted secondary processor [410fd034]
[    0.196672] Detected VIPT I-cache on CPU2
[    0.196713] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000
[    0.196762] CPU2: using LPI pending table @0x00000008c03d0000
[    0.196810] CPU2: Booted secondary processor [410fd034]
[    0.225082] Detected VIPT I-cache on CPU3
[    0.225108] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000
[    0.225153] CPU3: using LPI pending table @0x00000008c0430000
[    0.225183] CPU3: Booted secondary processor [410fd034]
[    0.225313] smp: Brought up 1 node, 4 CPUs
[    0.296969] SMP: Total of 4 processors activated.
[    0.301786] CPU features: detected feature: GIC system register CPU interface
[    0.309091] CPU features: detected feature: 32-bit EL0 Support
[    0.315061] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.346357] CPU: All CPU(s) started at EL2
[    0.350574] alternatives: patching kernel code
[    0.356551] devtmpfs: initialized
[    0.369757] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
[    0.379383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.389378] futex hash table entries: 1024 (order: 1, 131072 bytes)
[    0.397250] pinctrl core: initialized pinctrl subsystem
[    0.403236] NET: Registered protocol family 16
[    0.409857] vdso: 2 pages (1 code @ ffff0000087d0000, 1 data @ ffff000008b20000)
[    0.423452] DMA: preallocated 256 KiB pool for atomic allocations
[    0.434583] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.441748] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.448880] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.466621] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.473505] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
[    0.482826] omap_i2c 42120000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/wkup_i2c0_pins_default, deferring probe
[    0.494739] omap_i2c 40b00000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/mcu_i2c0_pins_default, deferring probe
[    0.506519] omap_i2c 2000000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c0_pins_default, deferring probe
[    0.518122] omap_i2c 2010000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c1_pins_default, deferring probe
[    0.529719] omap_i2c 2020000.i2c: could not find pctldev for node /soc0/pinmux@11c000/main_i2c2_pins_default, deferring probe
[    0.541427] media: Linux media interface: v0.10
[    0.546093] Linux video capture interface: v2.00
[    0.550853] pps_core: LinuxPPS API ver. 1 registered
[    0.555935] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.565292] PTP clock support registered
[    0.569327] EDAC MC: Ver: 3.0.0
[    0.573464] Advanced Linux Sound Architecture Driver Initialized.
[    0.580431] clocksource: Switched to clocksource arch_sys_counter
[    0.586844] VFS: Disk quotas dquot_6.6.0
[    0.590969] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[    0.604946] NET: Registered protocol family 2
[    0.609942] TCP established hash table entries: 32768 (order: 2, 262144 bytes)
[    0.617653] TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
[    0.624999] TCP: Hash tables configured (established 32768 bind 32768)
[    0.631836] UDP hash table entries: 2048 (order: 0, 65536 bytes)
[    0.638104] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
[    0.644978] NET: Registered protocol family 1
[    0.649932] RPC: Registered named UNIX socket transport module.
[    0.656010] RPC: Registered udp transport module.
[    0.660825] RPC: Registered tcp transport module.
[    0.665640] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.672237] PCI: CLS 0 bytes, default 128
[    0.677278] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.689174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.695807] NFS: Registering the id_resolver key type
[    0.701022] Key type id_resolver registered
[    0.705305] Key type id_legacy registered
[    0.709426] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.716495] 9p: Installing v9fs 9p2000 file system support
[    0.726739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.734340] io scheduler noop registered
[    0.738468] io scheduler cfq registered (default)
[    0.743288] io scheduler mq-deadline registered
[    0.747927] io scheduler kyber registered
[    0.754292] pinctrl-single 11c000.pinmux: 185 pins at pa ffff000009c4c000 size 740
[    0.762210] pinctrl-single 11c2e8.pinmux: 9 pins at pa ffff000009c6c2e8 size 36
[    0.769933] pinctrl-single 4301c000.pinmux: 70 pins at pa ffff000009c8c000 size 280
[    0.785117] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.794505] console [ttyS2] disabled
[    0.798229] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 14, base_baud = 3000000) is a 8250
[    0.807033] console [ttyS2] enabled
[    0.814080] bootconsole [ns16550a0] disabled
[    0.834580] loop: module loaded
[    0.839647] libphy: Fixed MDIO Bus: probed
[    0.844339] tun: Universal TUN/TAP device driver, 1.6
[    0.849590] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.857417] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.863384] sky2: driver version 1.30
[    0.868339] VFIO - User Level meta-driver version: 0.3
[    0.874237] i2c /dev entries driver
[    0.878681] sdhci: Secure Digital Host Controller Interface driver
[    0.884864] sdhci: Copyright(c) Pierre Ossman
[    0.889240] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.896196] ledtrig-cpu: registered to indicate activity on CPUs
[    0.902291] ti-sci soc0:dmsc: invalid resource
[    0.907480] optee: probing for conduit method from DT.
[    0.916648] optee: initialized driver
[    0.921596] NET: Registered protocol family 17
[    0.926130] 9pnet: Installing 9P2000 support
[    0.930457] Key type dns_resolver registered
[    0.935359] registered taskstats version 1
[    0.940076] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.947252] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.954252] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.965927] ti-sci soc0:dmsc: invalid resource
[    0.970565] ti-sci soc0:dmsc: ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)')
[    0.996461] random: fast init done
[    1.318836] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    1.326009] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    1.333015] davinci_gpio 42110000.: IRQ not populated, err = -517
[    1.340596] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[    1.346958] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[    1.380598] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz
[    1.386780] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz
[    1.392944] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz
[    1.399976] ti-sci-inta 33d00000.interrupt-controller: ti,sci-dst-irq-type resource type ids not available
[    1.413898] keystone-pcie 5500000.pcie: Linked as a consumer to phy-900000.serdes.2
[    1.421618] keystone-pcie 5500000.pcie: Linked as a consumer to phy-910000.serdes.3
[    1.434701] OF: PCI: host bridge /soc0/pcie@5500000 ranges:
[    1.440294] OF: PCI:    IO 0x10020000..0x1002ffff -> 0x00000000
[    1.446220] OF: PCI:   MEM 0x10030000..0x17ffffff -> 0x10030000
[    2.452435] keystone-pcie 5500000.pcie: phy link never came up
[    2.458380] keystone-pcie 5500000.pcie: PCI host bridge to bus 0000:00
[    2.464913] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.470400] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.476580] pci_bus 0000:00: root bus resource [mem 0x10030000-0x17ffffff]
[    2.483475] pci 0000:00:00.0: [104c:b00c] type 01 class 0x060400
[    2.483512] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.483569] pci 0000:00:00.0: supports D1
[    2.483575] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.483870] pci 0000:00:00.0: BAR 6: assigned [mem 0x10030000-0x1003ffff pref]
[    2.491100] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.496495] pcieport 0000:00:00.0: limiting MRRS to 256
[    2.501942] pcieport 0000:00:00.0: Signaling PME with IRQ 31
[    2.507701] pcieport 0000:00:00.0: AER enabled with IRQ 31
[    2.514196] k3-navss-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187
[    2.524551] k3-navss-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled
[    2.531598] k3-navss-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.539617] k3-navss-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,255] sci-dev-id:195
[    2.549873] k3-navss-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled
[    2.556918] k3-navss-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.566494] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    2.572524] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    2.579220] Creating 7 MTD partitions on "47040000.ospi.0":
[    2.584801] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    2.591140] 0x000000080000-0x000000280000 : "ospi.tispl"
[    2.597081] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    2.603075] 0x000000680000-0x0000006a0000 : "ospi.env"
[    2.608835] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    2.615165] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    2.621052] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    2.736664] cadence-qspi 47040000.ospi: Cadence QSPI NOR probe failed -517
[    2.745225] spi spi2.0: not using DMA for McSPI (-19)
[    2.750515] m25p80 spi2.0: unrecognized JEDEC id bytes: 3f, ff, 1f
[    2.756720] m25p80: probe of spi2.0 failed with error -2
[    2.762516] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    2.769728] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    2.781317] UDMA has not been proped
[    2.784905] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517
[    2.794584] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    2.804511] mmc0: Unknown controller version (4). You may experience problems.
[    2.856443] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit
[    2.869105] mmc1: Unknown controller version (4). You may experience problems.
[    2.920445] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit
[    2.930652] mmc0: new HS200 MMC card at address 0001
[    2.937964] mmcblk0: mmc0:0001 R1J56L 14.7 GiB
[    2.942898] mmcblk0boot0: mmc0:0001 R1J56L partition 1 8.00 MiB
[    2.952006] mmcblk0boot1: mmc0:0001 R1J56L partition 2 8.00 MiB
[    2.958473] mmcblk0rpmb: mmc0:0001 R1J56L partition 3 4.00 MiB
[    2.999275] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc5900
[    3.006331] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc5900
[    3.014216] ti-udma 31150000.udmap: Channels: 267 (tchan: 120, echan: 32, rchan: 150, rflow: 300)
[    3.023114] mmc1: new high speed SDHC card at address aaaa
[    3.028935] mmcblk1: mmc1:aaaa SA08G 7.40 GiB
[    3.038780]  mmcblk1: p1 p2
[    3.052538] ti-udma 285c0000.udmap: Channels: 96 (tchan: 48, echan: 0, rchan: 48, rflow: 96)
[    3.067594] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    3.073633] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    3.080332] Creating 7 MTD partitions on "47040000.ospi.0":
[    3.085907] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    3.092204] 0x000000080000-0x000000280000 : "ospi.tispl"
[    3.098117] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    3.104161] 0x000000680000-0x0000006a0000 : "ospi.env"
[    3.110016] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    3.116334] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    3.122249] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    3.130585] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    3.137772] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    3.155531] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[    3.166767] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    3.175236] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 0.4
[    3.182459] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[    3.228444] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000
[    3.236619] libphy: 46000000.ethernet: probed
[    3.243614] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.250535] hctosys: unable to open rtc device (rtc0)
[    3.347181] ALSA device list:
[    3.350165]   No soundcards found.
[    3.839613] EXT4-fs (mmcblk1p2): 4 orphan inodes deleted
[    3.844960] EXT4-fs (mmcblk1p2): recovery complete
[    3.863082] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.871239] VFS: Mounted root (ext4 filesystem) on device 179:130.
[    3.878712] devtmpfs: mounted
[    3.881868] Freeing unused kernel memory: 448K
[    4.150523] systemd[1]: System time before build time, advancing clock.
[    4.242539] NET: Registered protocol family 10
[    4.248093] Segment Routing with IPv6
[    4.293146] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    4.314340] systemd[1]: Detected architecture arm64.
[    4.334310] systemd[1]: Set hostname to <am65xx-evm>.
[    4.663503] random: systemd: uninitialized urandom read (16 bytes read)
[    4.672174] systemd[1]: Created slice User and Session Slice.
[    4.692626] random: systemd: uninitialized urandom read (16 bytes read)
[    4.699474] systemd[1]: Listening on Journal Socket.
[    4.716611] random: systemd: uninitialized urandom read (16 bytes read)
[    4.724215] systemd[1]: Created slice System Slice.
[    4.747615] systemd[1]: Starting Load Kernel Modules...
[    4.768740] systemd[1]: Reached target Slices.
[    4.773775] cryptodev: loading out-of-tree module taints kernel.
[    4.785127] cryptodev: driver 1.9 loaded.
[    4.789370] systemd[1]: Reached target Swap.
[    4.813745] systemd[1]: Mounting Temporary Directory (/tmp)...
[    4.919908] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[    5.398472] systemd-journald[151]: Received request to flush runtime journal from PID 1
[    7.522762] input: gpio-decoder as /devices/platform/gpio-decoder/input/input1
[    7.669597] CAN device driver interface
[    7.702253] m_can 40528000.mcan: m_can device registered (irq=10, version=32)
[    7.743920] m_can 40568000.mcan: m_can device registered (irq=12, version=32)
[    7.777026] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
[    7.829618] omap_rng 4e10000.trng: Random Number Generator ver. 230b34c
[    7.856864] pruss b000000.icssg: creating PRU cores and other child platform devices
[    7.899623] remoteproc remoteproc0: b034000.pru is available
[    7.905634] pru-rproc b034000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@34000 probed successfully
[    7.923694] remoteproc remoteproc1: b004000.rtu is available
[    7.929669] pru-rproc b004000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@4000 probed successfully
[    7.958308] remoteproc remoteproc2: b038000.pru is available
[    7.966287] pru-rproc b038000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@38000 probed successfully
[    8.001370] remoteproc remoteproc3: b006000.rtu is available
[    8.026696] pru-rproc b006000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@6000 probed successfully
[    8.082813] am65-cpsw-nuss 46000000.ethernet: Phy mode driver DT not found
[    8.111574] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL)
[    8.124082] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.126466] davinci_mdio b032400.mdio: davinci mdio revision 1.7, bus freq 1000000
[    8.126475] libphy: b032400.mdio: probed
[    8.158873] davinci_mdio b032400.mdio: phy[0]: device b032400.mdio:00, driver TI DP83867
[    8.167216] davinci_mdio b032400.mdio: phy[3]: device b032400.mdio:03, driver TI DP83867
[    8.183350] [drm] Initialized pvr 1.17.4948957 20110701 for 7000000.gpu on minor 0
[    8.199621] pruss b100000.icssg: creating PRU cores and other child platform devices
[    8.212857] remoteproc remoteproc4: b134000.pru is available
[    8.214882] icssg-prueth pruss0_eth: TI PRU ethernet driver initialized: dual EMAC mode
[    8.225839] random: crng init done
[    8.225845] random: 7 urandom warning(s) missed due to ratelimiting
[    8.238556] pru-rproc b134000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@34000 probed successfully
[    8.253248] remoteproc remoteproc5: b104000.rtu is available
[    8.263669] pru-rproc b104000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@4000 probed successfully
[    8.278387] remoteproc remoteproc6: b138000.pru is available
[    8.282293] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]
[    8.295071] pru-rproc b138000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@38000 probed successfully
[    8.310708] remoteproc remoteproc7: b106000.rtu is available
[    8.317315] pru-rproc b106000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@6000 probed successfully
[    8.357388] davinci_mdio b132400.mdio: davinci mdio revision 1.7, bus freq 1000000
[    8.366168] libphy: b132400.mdio: probed
[    8.380238] davinci_mdio b132400.mdio: phy[0]: device b132400.mdio:00, driver TI DP83867
[    8.393965] davinci_mdio b132400.mdio: phy[3]: device b132400.mdio:03, driver TI DP83867
[    8.408652] pruss b200000.icssg: creating PRU cores and other child platform devices
[    8.441229] icssg-prueth pruss1_eth: TI PRU ethernet driver initialized: dual EMAC mode
[    8.447191] remoteproc remoteproc8: b234000.pru is available
[    8.447251] pru-rproc b234000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@34000 probed successfully
[    8.448195] remoteproc remoteproc9: b204000.rtu is available
[    8.448241] pru-rproc b204000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@4000 probed successfully
[    8.449070] remoteproc remoteproc10: b238000.pru is available
[    8.449114] pru-rproc b238000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@38000 probed successfully
[    8.449724] remoteproc remoteproc11: b206000.rtu is available
[    8.449761] pru-rproc b206000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@6000 probed successfully
[    8.488581] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000
[    8.488589] libphy: b232400.mdio: probed
[    8.521146] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867
[    8.521154] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867
[    8.591858] icssg-prueth pruss2_eth: TI PRU ethernet driver initialized: dual EMAC mode
[    8.618564] k3_r5_rproc soc0:mcu_r5f_cluster@41000000: creating child devices for R5F cores
[    8.688968] platform 41000000.r5f: boot_vector = 0x41c00000, cfg = 0x1903 ctrl = 0x0 stat = 0x104
[    8.731616] platform 41000000.r5f: assigned reserved memory node r5f0-dma-memory@9c000000
[    8.740521] remoteproc remoteproc12: 41000000.r5f is available
[    8.788701] NET: Registered protocol family 15
[    9.032962] remoteproc remoteproc12: powering up 41000000.r5f
[    9.038902] remoteproc remoteproc12: Booting fw image am65x-mcu-r5f0-fw, size 3864336
[    9.048054] platform 41000000.r5f: booting R5F core using boot addr = 0x0
[    9.055804] remoteproc remoteproc12: registered virtio0 (type 7)
[    9.061861] remoteproc remoteproc12: remote processor 41000000.r5f is now up
[    9.154665] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down
[    9.218993] Initializing XFRM netlink socket
[    9.318631] remoteproc remoteproc0: powering up b034000.pru
[    9.348792] remoteproc remoteproc0: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120
[    9.359994] remoteproc remoteproc0: remote processor b034000.pru is now up
[    9.368301] remoteproc remoteproc1: powering up b004000.rtu
[    9.386446] remoteproc remoteproc1: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552
[    9.397419] remoteproc remoteproc1: remote processor b004000.rtu is now up
[    9.408730] icssg-prueth pruss0_eth: setting rx flow id 150
[    9.415898] net eth1: started
[    9.419680] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.484304] remoteproc remoteproc2: powering up b038000.pru
[    9.496976] remoteproc remoteproc2: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040
[    9.506502] remoteproc remoteproc2: remote processor b038000.pru is now up
[    9.514038] remoteproc remoteproc3: powering up b006000.rtu
[    9.525146] virtio_rpmsg_bus virtio0: rpmsg host is online
[    9.531038] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d
[    9.572147] NET: Registered protocol family 44
[    9.575655] remoteproc remoteproc3: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568
[    9.575696] remoteproc remoteproc3: remote processor b006000.rtu is now up
[    9.577743] icssg-prueth pruss0_eth: setting rx flow id 151
[    9.578900] net eth2: started
[    9.579122] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.599466] usbcore: registered new interface driver usbfs
[    9.604160] usbcore: registered new interface driver hub
[    9.605558] usbcore: registered new device driver usb
[    9.625782] remoteproc remoteproc4: powering up b134000.pru
[    9.626081] remoteproc remoteproc4: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120
[    9.626116] remoteproc remoteproc4: remote processor b134000.pru is now up
[    9.626133] remoteproc remoteproc5: powering up b104000.rtu
[    9.626200] remoteproc remoteproc5: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552
[    9.626227] remoteproc remoteproc5: remote processor b104000.rtu is now up
[    9.628242] icssg-prueth pruss1_eth: setting rx flow id 152
[    9.629370] net eth3: started
[    9.629574] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    9.637953] remoteproc remoteproc8: powering up b234000.pru
[    9.638080] remoteproc remoteproc8: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120
[    9.638113] remoteproc remoteproc8: remote processor b234000.pru is now up
[    9.638131] remoteproc remoteproc9: powering up b204000.rtu
[    9.638197] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552
[    9.638223] remoteproc remoteproc9: remote processor b204000.rtu is now up
[    9.640237] icssg-prueth pruss2_eth: setting rx flow id 153
[    9.641332] net eth5: started
[    9.641537] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready
[    9.648567] remoteproc remoteproc6: powering up b138000.pru
[    9.648688] remoteproc remoteproc6: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040
[    9.648722] remoteproc remoteproc6: remote processor b138000.pru is now up
[    9.648739] remoteproc remoteproc7: powering up b106000.rtu
[    9.648803] remoteproc remoteproc7: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568
[    9.648830] remoteproc remoteproc7: remote processor b106000.rtu is now up
[    9.650842] icssg-prueth pruss1_eth: setting rx flow id 154
[    9.651877] net eth4: started
[    9.652083] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
[    9.660015] remoteproc remoteproc10: powering up b238000.pru
[    9.660133] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040
[    9.660167] remoteproc remoteproc10: remote processor b238000.pru is now up
[    9.660184] remoteproc remoteproc11: powering up b206000.rtu
[    9.660246] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568
[    9.660273] remoteproc remoteproc11: remote processor b206000.rtu is now up
[    9.662287] icssg-prueth pruss2_eth: setting rx flow id 155
[    9.663337] net eth6: started
[    9.663548] IPv6: ADDRCONF(NETDEV_UP): eth6: link is not ready
[    9.758652] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    9.759094] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    9.759928] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x00010010
[    9.760004] xhci-hcd xhci-hcd.0.auto: irq 298, io mem 0x04010000
[    9.760220] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.760226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.760231] usb usb1: Product: xHCI Host Controller
[    9.760236] usb usb1: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[    9.760242] usb usb1: SerialNumber: xhci-hcd.0.auto
[    9.768313] hub 1-0:1.0: USB hub found
[    9.769347] hub 1-0:1.0: 1 port detected
[    9.770081] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    9.770102] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    9.770121] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    9.770651] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.770783] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    9.770790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.770795] usb usb2: Product: xHCI Host Controller
[    9.770800] usb usb2: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[    9.770805] usb usb2: SerialNumber: xhci-hcd.0.auto
[    9.771938] hub 2-0:1.0: USB hub found
[    9.772283] hub 2-0:1.0: 1 port detected
[    9.775137] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    9.775160] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    9.775803] xhci-hcd xhci-hcd.1.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x00010010
[    9.775880] xhci-hcd xhci-hcd.1.auto: irq 300, io mem 0x04030000
[    9.776073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    9.776080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.776085] usb usb3: Product: xHCI Host Controller
[    9.776090] usb usb3: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[    9.776095] usb usb3: SerialNumber: xhci-hcd.1.auto
[    9.779966] hub 3-0:1.0: USB hub found
[    9.780058] hub 3-0:1.0: 1 port detected
[    9.781370] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    9.781398] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    9.781418] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    9.781628] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    9.781886] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    9.781894] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.781900] usb usb4: Product: xHCI Host Controller
[    9.781906] usb usb4: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[    9.781911] usb usb4: SerialNumber: xhci-hcd.1.auto
[    9.783747] hub 4-0:1.0: USB hub found
[    9.783827] hub 4-0:1.0: 1 port detected
[   10.145973] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   12.225995] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.234754] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@am65xx-evm:~#
