root@am62xx-evm:~# dmesg
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 6.1.33-g40c32565ca (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Jul  6 14:17:24 UTC 2023
Machine model: Texas Instruments AM625 SK
efi: UEFI not found.
OF: reserved mem: OVERLAP DETECTED!
framebuffer@0 (0x00000000ff700000--0x00000000fffca000) overlaps with framebuffer@ff700000 (0x00000000ff700000--0x00000000fffca000)
Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB
OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool
Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB
OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool
Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB
OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool
Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB
OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool
Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB
OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool
Zone ranges:
  DMA      [mem 0x0000000080000000-0x00000000ffffffff]
  DMA32    empty
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x000000009c7fffff]
  node   0: [mem 0x000000009c800000-0x000000009e6fffff]
  node   0: [mem 0x000000009e700000-0x000000009e77ffff]
  node   0: [mem 0x000000009e780000-0x000000009fffffff]
  node   0: [mem 0x00000000a0000000-0x00000000ff6fffff]
  node   0: [mem 0x00000000ff700000-0x00000000fffc9fff]
  node   0: [mem 0x00000000fffca000-0x00000000ffffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff]
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: Trusted OS migration not required
psci: SMC Calling Convention v1.2
percpu: Embedded 19 pages/cpu s38760 r8192 d30872 u77824
pcpu-alloc: s38760 r8192 d30872 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected VIPT I-cache on CPU0
CPU features: detected: GIC system register CPU interface
CPU features: detected: ARM erratum 845719
alternatives: applying boot alternatives
Built 1 zonelists, mobility grouping on.  Total pages: 516096
Kernel command line: console=ttyS2,115200n8 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) loglevel=0 quiet vt.global_cursor_default=0 vt.color=0x00 systemd.show_status=0 rd.udev.log_priority=0 root=PARTUUID=9144bb42-02 rw rootfstype=ext4 rootwait
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1836240K/2097152K available (13696K kernel code, 1450K rwdata, 4032K rodata, 2624K init, 517K bss, 129840K reserved, 131072K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU event tracing is enabled.
rcu:    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
        Trampoline variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 256 SPIs implemented
GICv3: 0 Extended SPIs implemented
Root IRQ handler: gic_handle_irq
GICv3: GICv3 features: 16 PPIs
GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
ITS [mem 0x01820000-0x0182ffff]
GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000080040000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000080050000
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 200.00MHz (phys).
clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting shift to 2 and lim to 1.
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
Platform MSI: msi-controller@1820000 domain created
PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
GICv3: CPU1: using allocated LPI pending table @0x0000000080060000
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000
GICv3: CPU2: using allocated LPI pending table @0x0000000080070000
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000
GICv3: CPU3: using allocated LPI pending table @0x0000000080080000
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: applying system-wide alternatives
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.024:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
platform 30200000.dss: Fixed dependency cycle(s) with /display
KASLR disabled due to lack of seed
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected
reg-fixed-voltage regulator-0: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-0: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]'
reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-0: No GPIO consumer (null) found
reg-fixed-voltage regulator-1: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-1: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]'
reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-1: No GPIO consumer (null) found
reg-fixed-voltage regulator-2: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-2: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]'
reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-2: No GPIO consumer (null) found
reg-fixed-voltage regulator-3: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-3: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]'
reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-3: No GPIO consumer (null) found
reg-fixed-voltage regulator-5: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-5: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-5[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-5[0]'
reg-fixed-voltage regulator-5: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-5: No GPIO consumer (null) found
reg-fixed-voltage regulator-6: GPIO lookup for consumer (null)
reg-fixed-voltage regulator-6: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-6[0]'
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-6[0]'
reg-fixed-voltage regulator-6: using lookup tables for GPIO lookup
reg-fixed-voltage regulator-6: No GPIO consumer (null) found
gpio-regulator regulator-4: GPIO lookup for consumer enable
gpio-regulator regulator-4: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]'
of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]'
gpio-regulator regulator-4: using lookup tables for GPIO lookup
gpio-regulator regulator-4: No GPIO consumer enable found
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100
FPGA manager framework
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NET: Registered PF_XDP protocol family
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
9p: Installing v9fs 9p2000 file system support
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
io scheduler kyber registered
pinctrl-single 4084000.pinctrl: 34 pins, size 136
pinctrl-single f4000.pinctrl: 171 pins, size 684
pinctrl-single a40000.pinctrl: 512 pins, size 2048
gpio-clk clk_mcasp1: GPIO lookup for consumer enable
gpio-clk clk_mcasp1: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/clk_mcasp1[0]'
of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/clk_mcasp1[0]'
gpio-clk clk_mcasp1: using lookup tables for GPIO lookup
gpio-clk clk_mcasp1: No GPIO consumer enable found
clk_mcasp1: gpio_clk_driver_probe: Can't get 'enable' named GPIO property
gpio-clk: probe of clk_mcasp1 failed with error -2
Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled
loop: module loaded
megasas: 07.719.03.00-rc1
mdio_bus fixed-0: GPIO lookup for consumer reset
mdio_bus fixed-0: using lookup tables for GPIO lookup
mdio_bus fixed-0: No GPIO consumer reset found
tun: Universal TUN/TAP device driver, 1.6
thunder_xcv, ver 1.0
thunder_bgx, ver 1.0
nicpf, ver 1.0
hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
hns3: Copyright (c) 2017 Huawei Corporation.
hclge is initializing
e1000: Intel(R) PRO/1000 Network Driver
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
sky2: driver version 1.30
VFIO - User Level meta-driver version: 0.3
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
UDC core: g_mass_storage: couldn't find an available UDC
UDC core: g_serial: couldn't find an available UDC
UDC core: g_cdc: couldn't find an available UDC
UDC core: g_ncm: couldn't find an available UDC
Gt9xx driver installing..
>> i2c_add_driver - ret : 0x0
i2c_dev: i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
optee: probing for conduit method.
optee: revision 3.20 (8e74d476)
optee: dynamic shared memory is enabled
optee: initialized driver
Initializing XFRM netlink socket
NET: Registered PF_PACKET protocol family
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
i2c i2c-0: GPIO lookup for consumer scl
i2c i2c-0: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@f0000/i2c@20000000[0]'
of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@f0000/i2c@20000000[0]'
i2c i2c-0: using lookup tables for GPIO lookup
i2c i2c-0: No GPIO consumer scl found
i2c i2c-0: GPIO lookup for consumer sda
i2c i2c-0: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@f0000/i2c@20000000[0]'
of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@f0000/i2c@20000000[0]'
i2c i2c-0: using lookup tables for GPIO lookup
i2c i2c-0: No GPIO consumer sda found
at24 0-0051: supply vcc not found, using dummy regulator
at24 0-0051: GPIO lookup for consumer wp
at24 0-0051: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/i2c@20000000/eeprom@51[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/i2c@20000000/eeprom@51[0]'
at24 0-0051: using lookup tables for GPIO lookup
at24 0-0051: No GPIO consumer wp found
at24 0-0051: 65536 byte 24c512 EEPROM, writable, 64 bytes/write
omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz
i2c i2c-1: GPIO lookup for consumer scl
i2c i2c-1: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@f0000/i2c@20010000[0]'
of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@f0000/i2c@20010000[0]'
i2c i2c-1: using lookup tables for GPIO lookup
i2c i2c-1: No GPIO consumer scl found
i2c i2c-1: GPIO lookup for consumer sda
i2c i2c-1: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@f0000/i2c@20010000[0]'
of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@f0000/i2c@20010000[0]'
i2c i2c-1: using lookup tables for GPIO lookup
i2c i2c-1: No GPIO consumer sda found
i2c 1-0044: Fixed dependency cycle(s) with /bus@f0000/ticsi2rx@30102000/csi-bridge@30101000
tas2505-codec 1-0018: tas2505_i2c_probe: clock-source = MCLK
omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz
ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created
ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created
ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created
ti-udma 485c0100.dma-controller: Number of rings: 82
ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18)
ti-udma 485c0000.dma-controller: Number of rings: 150
ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15)
printk: console [ttyS2] disabled
omap8250 2800000.serial: GPIO lookup for consumer rs485-term
omap8250 2800000.serial: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2800000[0]'
of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2800000[0]'
omap8250 2800000.serial: using lookup tables for GPIO lookup
omap8250 2800000.serial: No GPIO consumer rs485-term found
2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 240, base_baud = 3000000) is a 8250
printk: console [ttyS2] enabled
omap8250 2840000.serial: GPIO lookup for consumer rs485-term
omap8250 2840000.serial: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2840000[0]'
of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2840000[0]'
omap8250 2840000.serial: using lookup tables for GPIO lookup
omap8250 2840000.serial: No GPIO consumer rs485-term found
2840000.serial: ttyS4 at MMIO 0x2840000 (irq = 242, base_baud = 3000000) is a 8250
omap8250 2860000.serial: GPIO lookup for consumer rs485-term
omap8250 2860000.serial: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2860000[0]'
of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2860000[0]'
omap8250 2860000.serial: using lookup tables for GPIO lookup
omap8250 2860000.serial: No GPIO consumer rs485-term found
2860000.serial: ttyS6 at MMIO 0x2860000 (irq = 243, base_baud = 3000000) is a 8250
spi-nor spi0.0: s28hs512t (65536 Kbytes)
7 fixed-partitions partitions found on MTD device fc40000.spi.0
Creating 7 MTD partitions on "fc40000.spi.0":
0x000000000000-0x000000080000 : "ospi.tiboot3"
0x000000080000-0x000000280000 : "ospi.tispl"
0x000000280000-0x000000680000 : "ospi.u-boot"
0x000000680000-0x0000006c0000 : "ospi.env"
0x0000006c0000-0x000000700000 : "ospi.env.backup"
0x000000800000-0x000003fc0000 : "ospi.rootfs"
0x000003fc0000-0x000004000000 : "ospi.phypattern"
davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode
mdio_bus 8000f00.mdio: GPIO lookup for consumer reset
mdio_bus 8000f00.mdio: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]'
of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]'
mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup
mdio_bus 8000f00.mdio: No GPIO consumer reset found
davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
mdio_bus 8000f00.mdio:00: GPIO lookup for consumer reset
mdio_bus 8000f00.mdio:00: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@0[0]'
of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@0[0]'
mdio_bus 8000f00.mdio:00: using lookup tables for GPIO lookup
mdio_bus 8000f00.mdio:00: No GPIO consumer reset found
mdio_bus 8000f00.mdio: MDIO device at address 1 is missing.
davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867
am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006
am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5
am65-cpsw-nuss 8000000.ethernet: ALE Table size 512
pps pps0: new PPS source ptp0
am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1
dwc3 31000000.usb: Configuration mismatch. dr_mode forced to gadget
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
udc 31000000.usb: failed to start g_mass_storage: -22
g_mass_storage: probe of gadget.0 failed with error -22
g_serial gadget.0: Gadget Serial v2.4
g_serial gadget.0: g_serial ready
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
xhci-hcd xhci-hcd.0.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010
xhci-hcd xhci-hcd.0.auto: irq 248, io mem 0x31100000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
(NULL device *): taeha0203x, Searching for format with pixel format: 0x59565955
(NULL device *): taeha0203x Format found: 0x59565955
(NULL device *): Filling V4L2 format for CSI format: 0x59565955
(NULL device *): Initial width: 640, height: 480, bpp: 16
(NULL device *): Pixels in word: 8
(NULL device *): Clamped and rounded width: 640
(NULL device *): Clamped height: 480
(NULL device *): taeha0203x, Searching for format with pixel format: 0x59565955
(NULL device *): taeha0203x Format found: 0x59565955
(NULL device *): Filling V4L2 format for CSI format: 0x59565955
(NULL device *): Initial width: 640, height: 480, bpp: 16
(NULL device *): Pixels in word: 8
(NULL device *): Clamped and rounded width: 640
(NULL device *): Clamped height: 480
(NULL device *): taeha0203x, Searching for format with pixel format: 0x59565955
(NULL device *): taeha0203x Format found: 0x59565955
(NULL device *): Filling V4L2 format for CSI format: 0x59565955
(NULL device *): Initial width: 640, height: 480, bpp: 16
(NULL device *): Pixels in word: 8
(NULL device *): Clamped and rounded width: 640
(NULL device *): Clamped height: 480
(NULL device *): taeha0203x, Searching for format with pixel format: 0x59565955
(NULL device *): taeha0203x Format found: 0x59565955
(NULL device *): Filling V4L2 format for CSI format: 0x59565955
(NULL device *): Initial width: 640, height: 480, bpp: 16
(NULL device *): Pixels in word: 8
(NULL device *): Clamped and rounded width: 640
(NULL device *): Clamped height: 480
cdns-csi2rx 30101000.csi-bridge: Probed CSI2RX with 4/4 lanes, 4 streams, external D-PHY
sdhci-am654 fa10000.mmc: GPIO lookup for consumer cd
sdhci-am654 fa10000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa10000[0]'
of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa10000[0]'
sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup
sdhci-am654 fa10000.mmc: No GPIO consumer cd found
sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp
sdhci-am654 fa10000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]'
sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup
sdhci-am654 fa10000.mmc: No GPIO consumer wp found
sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd
mmc0: CQHCI version 5.10
sdhci-am654 fa00000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]'
of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]'
sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup
sdhci-am654 fa00000.mmc: No GPIO consumer cd found
sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp
sdhci-am654 fa00000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]'
sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup
sdhci-am654 fa00000.mmc: No GPIO consumer wp found
mmc1: CQHCI version 5.10
sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp
sdhci-am654 fa20000.mmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]'
sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup
sdhci-am654 fa20000.mmc: No GPIO consumer wp found
mmc2: CQHCI version 5.10
gpiochip_find_base: found new base at 488
gpio gpiochip0: (4201000.gpio): added GPIO chardev (254:0)
gpio gpiochip0: registered GPIOs 488 to 511 on 4201000.gpio
gpiochip_find_base: found new base at 396
gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1)
gpio gpiochip1: registered GPIOs 396 to 487 on 600000.gpio
gpiochip_find_base: found new base at 344
gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2)
gpio gpiochip2: registered GPIOs 344 to 395 on 601000.gpio
[gtp_probe:1962]
goodix-ts 0-005d: GTP Driver Version: V2.8.0.2<2017/12/14>
goodix-ts 0-005d: GTP I2C Address: 0x5d
goodix-ts 0-005d: Unset touchscreen-max-id, use default
goodix-ts 0-005d: touch input parameters is [id x y w p]<16 800 480 1024 1024>
goodix-ts 0-005d: int-sync enabled
goodix-ts 0-005d: driver-send-cfg enabled
goodix-ts 0-005d: auto-update-cfg enabled
goodix-ts 0-005d: esd-protect enabled
goodix-ts 0-005d: type-a-report enabled
of_get_named_gpiod_flags: parsed 'irq-gpios' property of node '/bus@f0000/i2c@20000000/touchscreen@5d[0]' - status (0)
of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/bus@f0000/i2c@20000000/touchscreen@5d[0]' - status (0)
goodix-ts 0-005d: get RST [0x1f2] INT [0x1f1] from DTS
goodix-ts 0-005d: supply vdd_ana not found, using dummy regulator
goodix-ts 0-005d: supply vcc_i2c not found, using dummy regulator
goodix-ts 0-005d: Failed get pinctrl state:output_high
goodix-ts 0-005d: Success request irq-gpio
goodix-ts 0-005d: Success request rst-gpio
goodix-ts 0-005d: Guitar reset
mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit
mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit
mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit
mmc1: new high speed SDHC card at address 59b4
mmcblk1: mmc1:59b4 NCard 15.1 GiB
 mmcblk1: p1 p2
mmc0: Command Queue Engine enabled
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 0IM20E 29.6 GiB
 mmcblk0: p1
mmcblk0boot0: mmc0:0001 0IM20E 31.5 MiB
mmcblk0boot1: mmc0:0001 0IM20E 31.5 MiB
mmcblk0rpmb: mmc0:0001 0IM20E 4.00 MiB, chardev (238:0)
goodix-ts 0-005d: GTP reset Guitar
goodix-ts 0-005d: I2C Addr is 5d
goodix-ts 0-005d: IC Version: 911_1060
goodix-ts 0-005d: Config group5 used,length: 186
goodix-ts 0-005d: Driver send config
goodix-ts 0-005d: Use type A report protocol
input: goodix-ts as /devices/virtual/input/input0
goodix-ts 0-005d: INT num 275, trigger type:2
goodix-ts 0-005d: create proc entry gt9xx_config success
goodix-ts 0-005d: Alloc memory size:1534.
goodix-ts 0-005d: I2C function: without pre and end cmd!
goodix-ts 0-005d: Create proc entry success!
goodix-ts 0-005d: ESD on
tp2855 1-0044: tp2855 probe starts
tp2855 1-0044: GPIO lookup for consumer reset-gpios
tp2855 1-0044: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'reset-gpios-gpios' property of node '/bus@f0000/i2c@20010000/tp2855ov2312_mipi@44[0]'
of_get_named_gpiod_flags: can't parse 'reset-gpios-gpio' property of node '/bus@f0000/i2c@20010000/tp2855ov2312_mipi@44[0]'
tp2855 1-0044: using lookup tables for GPIO lookup
tp2855 1-0044: No GPIO consumer reset-gpios found
tp2855 1-0044: tp2855 probe reset gpio = 0
of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/bus@f0000/i2c@20010000/tp2855ov2312_mipi@44[0]' - status (0)
tp2855 1-0044: tp2855 probe tp2855->clk = 21709056
tp2855 1-0044: xvclk rate: 27000000 Hz
tp2855 1-0044: tp2855 Probe hardware reset
tp2855 1-0044: tp2855 probe init decoder registers IN/OUT
tp2855 1-0044: tp2855, tp2855_start_stream and init ALL registors
tp2855 1-0044: tp2855,  init ALL registors end
tp2855 1-0044: tp2855  chip id found id_high = 0x28, id_low = 0x55
tp2855 1-0044: Initialize the subdev and its controls finish.
tp2855 1-0044: Consider updating driver tp2855 to match on endpoints
tp2855 1-0044: tp2855 probed  successfully
asoc-simple-card sound: GPIO lookup for consumer simple-audio-card,hp-det
asoc-simple-card sound: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpios' property of node '/sound[0]'
of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
asoc-simple-card sound: using lookup tables for GPIO lookup
asoc-simple-card sound: No GPIO consumer simple-audio-card,hp-det found
asoc-simple-card sound: GPIO lookup for consumer simple-audio-card,mic-det
asoc-simple-card sound: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpios' property of node '/sound[0]'
of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
asoc-simple-card sound: using lookup tables for GPIO lookup
asoc-simple-card sound: No GPIO consumer simple-audio-card,mic-det found
tas2505-codec 1-0018: tas2505_codec_probe: Probe finished
tas2505-codec 1-0018: tas2505_set_dai_sysclk: clk_id: 0, freq: 12288000
tas2505-codec 1-0018: tas2505_set_dai_sysclk: id [0] tas2505->sysclk: 12288000, freq: 12288000
ALSA device list:
  #0: TAS2505
EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 2624K
Run /sbin/init as init process
  with arguments:
    /sbin/init
  with environment:
    HOME=/
    TERM=linux
systemd[1]: System time before build time, advancing clock.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to <am62xx-evm>.
systemd-sysv-generator[162]: SysV service '/etc/init.d/dropbear' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/telnetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/netperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/psplash.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/resize_rootfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[162]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice Slice /system/serial-getty.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Reached target RPC Port Mapper.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Kernel Debug File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/debug).
systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Started Start psplash boot splash screen.
systemd[1]: Starting RPC Bind...
systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
systemd[1]: Starting Journal Service...
fuse: init (API version 7.37)
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Generate network units from Kernel command line...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
systemd[1]: Finished Remount Root and Kernel File Systems.
cryptodev: loading out-of-tree module taints kernel.
cryptodev: driver 1.12 loaded.
systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc).
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Generate network units from Kernel command line.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started RPC Bind.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Reached target Preparation for Local File Systems.
audit: type=1334 audit(1651167747.544:2): prog-id=5 op=LOAD
audit: type=1334 audit(1651167747.544:3): prog-id=6 op=LOAD
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started Journal Service.
systemd-journald[178]: Received client request to flush runtime journal.
pwm-backlight backlight: GPIO lookup for consumer enable
pwm-backlight backlight: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/backlight[0]'
of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/backlight[0]'
pwm-backlight backlight: using lookup tables for GPIO lookup
pwm-backlight backlight: No GPIO consumer enable found
pwm-backlight backlight: supply power not found, using dummy regulator
panel-simple display: supply power not found, using dummy regulator
panel-simple display: GPIO lookup for consumer enable
panel-simple display: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display[0]'
of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display[0]'
panel-simple display: using lookup tables for GPIO lookup
panel-simple display: No GPIO consumer enable found
panel-simple display: Specify missing bus_flags
[drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0
Console: switching to colour frame buffer device 100x30
tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device
rtc rtc0: Unknown quartz-load-femtofarads value: 1250. Assuming 12500
rtc-pcf8523 1-0068: registered as rtc0
rtc-pcf8523 1-0068: setting system clock to 2025-05-14T07:58:51 UTC (1747209531)
systemd-journald[178]: Oldest entry in /run/log/journal/a78a477c2a594aa6ba0481866467b678/system.journal is older than the configured file retention duration (1month), suggesting rotation.
systemd-journald[178]: /run/log/journal/a78a477c2a594aa6ba0481866467b678/system.journal: Journal header limits reached or header out-of-date, rotating.
systemd-journald[178]: Oldest entry in /run/log/journal/a78a477c2a594aa6ba0481866467b678/system.journal is older than the configured file retention duration (1month), suggesting rotation.
systemd-journald[178]: /run/log/journal/a78a477c2a594aa6ba0481866467b678/system.journal: Journal header limits reached or header out-of-date, rotating.
CAN device driver interface
k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000
k3-m4-rproc 5000000.m4fss: local reset is deasserted for device
remoteproc remoteproc0: 5000000.m4fss is available
remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2
remoteproc remoteproc0: powering up 5000000.m4fss
remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2
rtc-ti-k3 2b1f0000.rtc: registered as rtc1
rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp
rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]'
rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup
rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found
platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1)
platform 78000000.r5f: configured R5F for IPC-only mode
platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000
remoteproc remoteproc1: 78000000.r5f is available
remoteproc remoteproc1: attaching to 78000000.r5f
platform 78000000.r5f: R5F core initialized in IPC-only mode
rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000
virtio_rpmsg_bus virtio0: rpmsg host is online
rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7)
remoteproc remoteproc1: remote processor 78000000.r5f is now attached
virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd
virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe
can-transceiver-phy can-phy1: GPIO lookup for consumer standby
can-transceiver-phy can-phy1: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'standby-gpios' property of node '/can-phy1[0]'
of_get_named_gpiod_flags: can't parse 'standby-gpio' property of node '/can-phy1[0]'
can-transceiver-phy can-phy1: using lookup tables for GPIO lookup
can-transceiver-phy can-phy1: No GPIO consumer standby found
can-transceiver-phy can-phy2: GPIO lookup for consumer standby
m_can_platform 4e00000.can: GPIO lookup for consumer termination
m_can_platform 4e00000.can: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'termination-gpios' property of node '/bus@f0000/bus@4000000/can@4e00000[0]'
of_get_named_gpiod_flags: can't parse 'termination-gpio' property of node '/bus@f0000/bus@4000000/can@4e00000[0]'
m_can_platform 4e00000.can: using lookup tables for GPIO lookup
m_can_platform 4e00000.can: No GPIO consumer termination found
m_can_platform 4e00000.can: m_can device registered (irq=0, version=32)
can-transceiver-phy can-phy2: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'standby-gpios' property of node '/can-phy2[0]'
of_get_named_gpiod_flags: can't parse 'standby-gpio' property of node '/can-phy2[0]'
can-transceiver-phy can-phy2: using lookup tables for GPIO lookup
can-transceiver-phy can-phy2: No GPIO consumer standby found
m_can_platform 4e10000.can: GPIO lookup for consumer termination
m_can_platform 4e10000.can: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'termination-gpios' property of node '/bus@f0000/bus@4000000/can@4e10000[0]'
of_get_named_gpiod_flags: can't parse 'termination-gpio' property of node '/bus@f0000/bus@4000000/can@4e10000[0]'
m_can_platform 4e10000.can: using lookup tables for GPIO lookup
m_can_platform 4e10000.can: No GPIO consumer termination found
m_can_platform 4e10000.can: m_can device registered (irq=0, version=32)
PVR_K:  199: Device: fd00000.gpu
PVR_K:  199: Read BVNC 33.15.11.3 from HW device registers
PVR_K:  199: RGX Device registered with BVNC 33.15.11.3
[drm] Initialized pvr 23.1.6404501 20170530 for fd00000.gpu on minor 1
random: crng init done
audit: type=1334 audit(1747209533.388:4): prog-id=7 op=LOAD
audit: type=1334 audit(1747209533.388:5): prog-id=8 op=LOAD
audit: type=1701 audit(1747209533.504:6): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=398 comm="psplash" exe="/usr/bin/psplash-default" sig=5 res=1
audit: type=1334 audit(1747209533.728:7): prog-id=9 op=LOAD
audit: type=1334 audit(1747209533.736:8): prog-id=10 op=LOAD
remoteproc remoteproc2: 30074000.pru is available
remoteproc remoteproc3: 30078000.pru is available
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
audit: type=1334 audit(1747209535.204:9): prog-id=10 op=UNLOAD
audit: type=1334 audit(1747209535.204:10): prog-id=9 op=UNLOAD
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
audit: type=1334 audit(1747209542.048:11): prog-id=11 op=LOAD
audit: type=1334 audit(1747209542.048:12): prog-id=12 op=LOAD
audit: type=1006 audit(1747209542.476:13): pid=651 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
audit: type=1300 audit(1747209542.476:13): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe54e3a28 a2=1 a3=0 items=0 ppid=1 pid=651 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
audit: type=1327 audit(1747209542.476:13): proctitle="(systemd)"
audit: type=1334 audit(1747209542.536:14): prog-id=13 op=LOAD
audit: type=1300 audit(1747209542.536:14): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff0e52ad0 a2=78 a3=0 items=0 ppid=1 pid=651 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null)
audit: type=1327 audit(1747209542.536:14): proctitle="(systemd)"
audit: type=1334 audit(1747209542.536:15): prog-id=13 op=UNLOAD
audit: type=1334 audit(1747209542.536:16): prog-id=14 op=LOAD
root@am62xx-evm:~# dmesg | grep g_mass_storage
UDC core: g_mass_storage: couldn't find an available UDC
udc 31000000.usb: failed to start g_mass_storage: -22
g_mass_storage: probe of gadget.0 failed with error -22
root@am62xx-evm:~#