U-Boot SPL 2024.04-ti-gfb66753ebf09 (Apr 14 2025 - 09:47:00 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.11.0(release):v2.11.0-906-g58b25570c9-dirty NOTICE: BL31: Built : 04:20:32, Nov 1 2024 I/TC: I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2024.04-ti-gfb66753ebf09 (Apr 09 2025 - 06:53:19 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 error getting GPIO lookup name: -22 Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2024.04-ti-gfb66753ebf09 (Apr 09 2025 - 06:53:19 +0000) SoC: J721E SR2.0 GP Model: Texas Instruments J721E SK EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Board: J721EX-PM1-SOM rev E2 DRAM: 2 GiB (effective 4 GiB) Core: 125 devices, 33 uclasses, devicetree: separate Flash: 0 Bytes MMC: mmc@4fb0000: 1 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Net: Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000port@1: phy_connect() failed No ethernet found. Hit space key to stop autoboot switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 1296 bytes read in 30 ms (42 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... 1 bytes read in 30 ms (0 Bytes/s) Already setup. GPIO: 'gpio@22_17' not found Command 'gpio' failed: Error -22 GPIO: 'gpio@22_16' not found Command 'gpio' failed: Error -22 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work 89944 bytes read in 40 ms (2.1 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 40 ms (2.1 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 40 ms (2.1 MiB/s) Load Remote Processor 4 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 40 ms (2.1 MiB/s) Load Remote Processor 5 with data@addr=0x82000000 89944 bytes: Success! 148732 bytes read in 41 ms (3.5 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 148732 bytes: Success! 148732 bytes read in 42 ms (3.4 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 148732 bytes: Success! 10488888 bytes read in 47 ms (212.8 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 10488888 bytes: Success! 19677696 bytes read in 419 ms (44.8 MiB/s) 124361 bytes read in 35 ms (3.4 MiB/s) Working FDT set to 88000000 2300 bytes read in 33 ms (67.4 KiB/s) failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND 2405 bytes read in 33 ms (70.3 KiB/s) failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC base fdt does not have a /__symbols__ node make sure you've compiled with -@ ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': No EFI system partition No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000ethernet@46000: phy_connect() failed Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000ethernet@46000: phy_connect() failed 0 efi_mgr ready (none) 0 ** Booting bootflow '' with efi_mgr Booting: mmc 1 error: no such device: ((hd0,msdos1)/EFI/BOOT)/EFI/BOOT/grub.cfg. error: serial port `com0' isn't found. GNU GRUB version 2.12 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x*boot x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Use the ▲ and ▼ keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable EFI stub: Using DTB from configuration table EFI stub: Exiting boot services... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 6.6.44-ti (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Thu Apr 17 06:52:28 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Texas Instruments J721E SK [ 0.000000] efi: EFI v2.10 by Das U-Boot [ 0.000000] efi: RTPROP=0xfce4a040 SMBIOS 3.0=0xfdeb2000 MEMRESERVE=0xfce1c040 [ 0.000000] Reserved memory: created CMA memory pool at 0x00000008e0000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000008e0000000..0x00000008ffffffff (524288 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000fce49fff] [ 0.000000] node 0: [mem 0x00000000fce4a000-0x00000000fce4afff] [ 0.000000] node 0: [mem 0x00000000fce4b000-0x00000000fce4bfff] [ 0.000000] node 0: [mem 0x00000000fce4c000-0x00000000fce6dfff] [ 0.000000] node 0: [mem 0x00000000fce6e000-0x00000000fdeb1fff] [ 0.000000] node 0: [mem 0x00000000fdeb2000-0x00000000fdeb2fff] [ 0.000000] node 0: [mem 0x00000000fdeb3000-0x00000000ffeaffff] [ 0.000000] node 0: [mem 0x00000000ffeb0000-0x00000000ffebffff] [ 0.000000] node 0: [mem 0x00000000ffec0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: BOOT_IMAGE=/Image root=PARTUUID=076c4a2a-02 rootwait rootfstype=ext4 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x00000000f8e1a000-0x00000000fce1a000] (64MB) [ 0.000000] Memory: 3302472K/4194304K available (11648K kernel code, 1232K rwdata, 3832K rodata, 2368K init, 514K bss, 367544K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000880040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.000217] Console: colour dummy device 80x25 [ 0.000223] printk: console [tty0] enabled [ 0.000623] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.000633] pid_max: default: 32768 minimum: 301 [ 0.000679] LSM: initializing lsm=capability,selinux,integrity [ 0.000699] SELinux: Initializing. [ 0.000777] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000794] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001674] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.001729] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.001844] rcu: Hierarchical SRCU implementation. [ 0.001851] rcu: Max phase no-delay instances is 1000. [ 0.002034] Platform MSI: msi-controller@1820000 domain created [ 0.002385] Remapping and enabling EFI services. [ 0.002529] smp: Bringing up secondary CPUs ... [ 0.011117] Detected PIPT I-cache on CPU1 [ 0.011164] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.011176] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 [ 0.011206] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.011282] smp: Brought up 1 node, 2 CPUs [ 0.011303] SMP: Total of 2 processors activated. [ 0.011308] CPU features: detected: 32-bit EL0 Support [ 0.011312] CPU features: detected: CRC32 instructions [ 0.011383] CPU: All CPU(s) started at EL2 [ 0.011389] alternatives: applying system-wide alternatives [ 0.012222] devtmpfs: initialized [ 0.019813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.019841] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.026385] pinctrl core: initialized pinctrl subsystem [ 0.026693] SMBIOS 3.7.0 present. [ 0.026708] DMI: ti Texas Instruments J721E SK/Texas Instruments J721E SK, BIOS 2024.04-ti-gfb66753ebf09 04/01/2024 [ 0.027044] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027724] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.027819] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.027906] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.027935] audit: initializing netlink subsys (disabled) [ 0.028047] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 [ 0.028222] thermal_sys: Registered thermal governor 'step_wise' [ 0.028225] thermal_sys: Registered thermal governor 'power_allocator' [ 0.028247] cpuidle: using governor menu [ 0.028326] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.028355] ASID allocator initialised with 65536 entries [ 0.038109] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.038280] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.038318] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000 [ 0.040088] platform a000000.dp-bridge: Fixed dependency cycle(s) with /connector [ 0.040132] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000 [ 0.040376] platform hdmi-connector: Fixed dependency cycle(s) with /dvi-bridge [ 0.040411] platform 4a00000.dss: Fixed dependency cycle(s) with /dvi-bridge [ 0.040442] platform dvi-bridge: Fixed dependency cycle(s) with /hdmi-connector [ 0.040480] platform dvi-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.040734] Modules: 27824 pages in range for non-PLT usage [ 0.040738] Modules: 519344 pages in range for PLT usage [ 0.041150] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041162] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.041168] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.041172] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.041177] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041182] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.041186] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.041190] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.041899] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x2bb6402f] Detected [ 0.042588] iommu: Default domain type: Translated [ 0.042600] iommu: DMA domain TLB invalidation policy: strict mode [ 0.042730] SCSI subsystem initialized [ 0.042823] usbcore: registered new interface driver usbfs [ 0.042841] usbcore: registered new interface driver hub [ 0.042856] usbcore: registered new device driver usb [ 0.043084] pps_core: LinuxPPS API ver. 1 registered [ 0.043090] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.043099] PTP clock support registered [ 0.043202] EDAC MC: Ver: 3.0.0 [ 0.043479] scmi_core: SCMI protocol bus registered [ 0.043512] efivars: Registered efivars operations [ 0.043675] FPGA manager framework [ 0.044177] clocksource: Switched to clocksource arch_sys_counter [ 0.044309] VFS: Disk quotas dquot_6.6.0 [ 0.044327] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.047587] NET: Registered PF_INET protocol family [ 0.047736] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.049190] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.049228] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.049240] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.049370] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.050313] TCP: Hash tables configured (established 32768 bind 32768) [ 0.050415] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.050472] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.050621] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.050936] RPC: Registered named UNIX socket transport module. [ 0.050946] RPC: Registered udp transport module. [ 0.050950] RPC: Registered tcp transport module. [ 0.050954] RPC: Registered tcp-with-tls transport module. [ 0.050958] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.050965] NET: Registered PF_XDP protocol family [ 0.051630] Initialise system trusted keyrings [ 0.051738] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.051899] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.052016] NFS: Registering the id_resolver key type [ 0.052034] Key type id_resolver registered [ 0.052039] Key type id_legacy registered [ 0.052050] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.052057] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.065865] Key type asymmetric registered [ 0.065875] Asymmetric key parser 'x509' registered [ 0.065905] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.065990] io scheduler mq-deadline registered [ 0.065997] io scheduler kyber registered [ 0.066018] io scheduler bfq registered [ 0.068080] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 [ 0.068561] pinctrl-single 11c000.pinctrl: 173 pins, size 692 [ 0.069164] pinctrl-single 104200.pinctrl: 20 pins, size 80 [ 0.069235] pinctrl-single 104280.pinctrl: 8 pins, size 32 [ 0.072480] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.075000] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001f8f) [ 0.075254] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq [ 0.075500] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq [ 0.076395] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs [ 0.079513] loop: module loaded [ 0.081742] tun: Universal TUN/TAP device driver, 1.6 [ 0.082184] VFIO - User Level meta-driver version: 0.3 [ 0.082738] usbcore: registered new interface driver usb-storage [ 0.083069] i2c_dev: i2c /dev entries driver [ 0.083693] sdhci: Secure Digital Host Controller Interface driver [ 0.083701] sdhci: Copyright(c) Pierre Ossman [ 0.083817] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.084141] ledtrig-cpu: registered to indicate activity on CPUs [ 0.084398] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.084802] usbcore: registered new interface driver usbhid [ 0.084809] usbhid: USB HID core driver [ 0.085484] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.085739] optee: probing for conduit method. [ 0.085759] optee: revision 4.4 (8f645256efc0dc66) [ 0.102211] optee: dynamic shared memory is enabled [ 0.102635] random: crng init done [ 0.102689] optee: initialized driver [ 0.103643] Initializing XFRM netlink socket [ 0.103677] NET: Registered PF_PACKET protocol family [ 0.103721] Key type dns_resolver registered [ 0.106761] registered taskstats version 1 [ 0.106827] Loading compiled-in X.509 certificates [ 0.113836] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') [ 0.224196] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 0.225014] pca954x 1-0071: supply vdd not found, using dummy regulator [ 0.240354] i2c i2c-1: Added multiplexed i2c bus 2 [ 0.240450] i2c i2c-1: Added multiplexed i2c bus 3 [ 0.240458] pca954x 1-0071: registered 2 multiplexed busses for I2C switch pca9543 [ 0.240486] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz [ 0.241061] omap_i2c 2010000.i2c: bus 4 rev0.12 at 100 kHz [ 0.241659] pca954x 5-0070: supply vdd not found, using dummy regulator [ 0.264351] i2c i2c-5: Added multiplexed i2c bus 6 [ 0.264453] i2c i2c-5: Added multiplexed i2c bus 7 [ 0.264462] pca954x 5-0070: registered 2 multiplexed busses for I2C switch pca9543 [ 0.264489] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz [ 0.264941] omap_i2c 2050000.i2c: bus 8 rev0.12 at 400 kHz [ 0.265074] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created [ 0.265180] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created [ 0.265275] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created [ 0.265456] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created [ 0.274399] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 [ 0.274420] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 0.274426] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 0.276712] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 [ 0.276731] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 0.276737] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 0.277372] 42300000.serial: ttyS0 at MMIO 0x42300000 (irq = 206, base_baud = 3000000) is a 8250 [ 0.277984] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 207, base_baud = 6000000) is a 8250 [ 0.278541] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 208, base_baud = 3000000) is a 8250 [ 0.278580] printk: console [ttyS2] enabled [ 2.309784] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 209, base_baud = 3000000) is a 8250 [ 2.319848] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode [ 2.364180] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.372107] mdio_bus 46000f00.mdio: MDIO device at address 0 is missing. [ 2.378817] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 [ 2.391677] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 2.398888] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 2.405232] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0 [ 2.415588] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 2.696774] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 [ 2.702753] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock [ 2.959726] tps6594 0-004c: Error IRQ trap undervoltage for LDO1 [ 2.969055] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) [ 2.980394] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) [ 2.995282] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 3.000381] 8 fixed-partitions partitions found on MTD device 47040000.spi.0 [ 3.007421] Creating 8 MTD partitions on "47040000.spi.0": [ 3.012898] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 3.019032] 0x000000080000-0x000000280000 : "ospi.tispl" [ 3.024837] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 3.030720] 0x000000680000-0x0000006c0000 : "ospi.env" [ 3.036347] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 3.042146] 0x0000007c0000-0x000000800000 : "ospi.env.backup" [ 3.048386] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 3.054272] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 3.060599] cadence-qspi 47040000.spi: Pattern not found. Skipping calibration. [ 3.068435] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode [ 3.112178] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 3.120104] mdio_bus 46000f00.mdio: MDIO device at address 0 is missing. [ 3.126812] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 [ 3.139683] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 3.146894] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 3.153205] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0 [ 3.170568] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 3.182131] mmc1: CQHCI version 5.10 [ 3.186214] clk: Disabling unused clocks [ 3.226761] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit [ 3.234339] Waiting for root device PARTUUID=076c4a2a-02... [ 3.294371] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 3.301269] mmcblk1: mmc1:aaaa SS16G 14.8 GiB [ 3.310954] mmcblk1: p1 p2 [ 3.321624] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.328933] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.507045] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs [ 3.513350] EXT4-fs (mmcblk1p2): recovery complete [ 3.522473] EXT4-fs (mmcblk1p2): mounted filesystem 96cb5726-6472-49d9-a610-6385e22c32b1 ro with ordered data mode. Quota mode: none. [ 3.534511] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.544472] devtmpfs: mounted [ 3.548440] Freeing unused kernel memory: 2368K [ 3.553051] Run /sbin/init as init process [ 3.852053] systemd[1]: System time before build time, advancing clock. [ 3.905187] NET: Registered PF_INET6 protocol family [ 3.910699] Segment Routing with IPv6 [ 3.914378] In-situ OAM (IOAM) with IPv6 [ 3.958127] systemd[1]: systemd 255.13^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.990034] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 4.012827] systemd[1]: Hostname set to . [ 4.281380] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 4.337386] systemd[1]: Queued start job for default target Graphical Interface. [ 4.379259] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 4.401483] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 4.425351] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 4.449107] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.472412] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.496336] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.520254] systemd[1]: Expecting device /dev/ttyS2... Expecting device /dev/ttyS2... [ 4.536286] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 4.552238] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.572227] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 4.588238] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 4.626818] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 4.652331] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 4.678171] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 4.700432] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 4.724829] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 4.748593] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.772576] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.792631] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.822452] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.844527] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.864538] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 4.912382] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 4.934412] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.960515] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 4.980527] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 4.998872] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 5.024677] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 5.072695] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 5.092789] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.116766] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.150607] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 5.160339] fuse: init (API version 7.39) [ 5.172736] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 5.200435] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.216728] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.236773] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network units from Kernel co[ 5.252726] systemd[1]: Starting Coldplug All udev Devices... mmand line... Starting Coldplug All udev Devices... [ 5.266696] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 5.272480] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System.[ 5.282368] systemd[1]: Mounted POSIX Message Queue File System. [ 5.286128] cryptodev: loading out-of-tree module taints kernel. [ OK ] Mounted POSIX Message Queue File Sy[ 5.300501] systemd[1]: Mounted Kernel Debug File System. stem. [ 5.301573] cryptodev: driver 1.14 loaded. [ OK ] Mounted Kernel Debug File System 5.316882] systemd[1]: Mounted Temporary Directory /tmp. m. [ 5.326211] systemd-journald[109]: Collecting audit messages is enabled. [ OK ] Mounted Temporary Directory /tmp 5.335452] systemd[1]: Finished Create List of Static Device Nodes. m. [ OK ] Finished Create List of Static Devi[ 5.347379] systemd[1]: modprobe@configfs.service: Deactivated successfully. ce Nodes. [ 5.359935] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configf[ 5.367653] systemd[1]: modprobe@drm.service: Deactivated successfully. s. [ 5.379659] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm[ 5.389418] systemd[1]: modprobe@fuse.service: Deactivated successfully. . [ 5.406757] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse. [ 5.428812] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Remount Root and Kernel File Systems... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev gracefully... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ 5.670310] EXT4-fs (mmcblk1p2): re-mounted 96cb5726-6472-49d9-a610-6385e22c32b1 r/w. Quota mode: none. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Create Static Device Nodes in /dev gracefully. Starting Flush Journal to Persistent Storage... [ 5.787000] systemd-journald[109]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... [ 5.933651] audit: type=1334 audit(1728487094.080:2): prog-id=6 op=LOAD [ 5.940619] audit: type=1334 audit(1728487094.088:3): prog-id=7 op=LOAD Starting Rule-based Manager for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save OS Random Seed... [ OK ] Reached target Local File Systems. Starting Create System Files and Directories... [ OK ] Finished Load/Save OS Random Seed. [ OK ] Finished Create System Files and Directories. [ 6.113832] audit: type=1334 audit(1728487094.260:4): prog-id=8 op=LOAD Starting Network Name Resolution... [ 6.146199] audit: type=1334 audit(1728487094.292:5): prog-id=9 op=LOAD Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ 6.210199] audit: type=1334 audit(1728487094.356:6): prog-id=10 op=LOAD [ 6.218015] audit: type=1334 audit(1728487094.364:7): prog-id=11 op=LOAD Starting User Database Manager... [ 6.232243] audit: type=1334 audit(1728487094.364:8): prog-id=12 op=LOAD [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started User Database Manager. [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Found device /dev/ttyS2. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. Starting Weston socket... [ 6.764542] audit: type=1334 audit(1728497587.324:9): prog-id=13 op=LOAD Starting D-Bus System Message Bus... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Reached target Socket Units. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ 6.949826] dbus-broker-lau[282]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ OK ] Started Job spooling tools. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Periodic Command Scheduler. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ 7.099202] audit: type=1334 audit(1728497587.660:10): prog-id=14 op=LOAD [ 7.113305] audit: type=1334 audit(1728497587.660:11): prog-id=15 op=LOAD Starting Telnet Server... [ OK ] Started Uart Manager. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Finished Telnet Server. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ 7.351356] CAN device driver interface [ 7.460986] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ OK ] Started User Login Management. [ 7.491781] mc: Linux media interface: v0.10 [ 7.503317] PVR_K: 171: Device: 4e20000000.gpu [ 7.524684] PVR_K: 171: Read BVNC 22.104.208.318 from HW device registers [ 7.535859] videodev: Linux video capture interface: v2.00 [ 7.548571] PVR_K: 171: RGX Device registered with BVNC 22.104.208.318 [ 7.567334] cdns-mhdp8546 a000000.dp-bridge: invalid resource (null) [ 7.574457] cdns-mhdp8546 a000000.dp-bridge: Failed to get SAPB memory resource, HDCP not supported [ 7.608880] at24 0-0051: supply vcc not found, using dummy regulator [ 7.615477] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.640473] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.653910] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.666647] at24 0-0051: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 7.668615] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.682710] [drm] Initialized pvr 24.1.6554834 20170530 for 4e20000000.gpu on minor 0 [ 7.697039] cfg80211: failed to load regulatory.db [ 7.756303] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 7.772733] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 7.792676] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 7.804707] platform 41000000.r5f: configured R5F for IPC-only mode [ 7.811373] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 [ 7.814312] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 7.827377] remoteproc remoteproc0: 41000000.r5f is available [ 7.836979] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 7.837699] remoteproc remoteproc0: attaching to 41000000.r5f [ OK ] Reached target Network. [ 7.854247] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node r5f-dma-memory@a0000000 [ 7.867254] virtio_rpmsg_bus virtio0: rpmsg host is online [ 7.879852] rproc-virtio rproc-virtio.11.auto: registered virtio0 (type 7) [ 7.889573] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [ 7.897217] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 7.905920] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 7.915363] remoteproc remoteproc0: remote processor 41000000.r5f is now attached [ 7.923026] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-dma-memory@a7000000 [ 7.933917] platform 5c00000.r5f: configured R5F for IPC-only mode Starting LLDP daemon... [ 7.940567] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000 [ 7.942368] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ 7.967514] remoteproc remoteproc2: 5c00000.r5f is available [ OK ] Started Netperf Benchmark Server 7.977839] remoteproc remoteproc2: attaching to 5c00000.r5f [ 7.983445] remoteproc remoteproc1: 4d80800000.dsp is available m. [ 7.985038] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node r5f-dma-memory@a2000000 [ 7.996361] remoteproc remoteproc1: attaching to 4d80800000.dsp [ 8.000699] virtio_rpmsg_bus virtio1: rpmsg host is online [ 8.011523] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 8.011634] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 8.011971] rproc-virtio rproc-virtio.12.auto: registered virtio1 (type 7) [ 8.011994] remoteproc remoteproc2: remote processor 5c00000.r5f is now attached [ 8.013856] platform 5d00000.r5f: configured R5F for IPC-only mode [ 8.014210] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000 [ 8.022855] rproc-virtio rproc-virtio.13.auto: assigned reserved memory node c66-dma-memory@a7000000 [ 8.023242] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.023260] rproc-virtio rproc-virtio.13.auto: registered virtio2 (type 7) [ 8.023264] remoteproc remoteproc1: remote processor 4d80800000.dsp is now attached [ 8.024064] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-dma-memory@a6000000 [ 8.026930] k3-dsp-rproc 4d81800000.dsp: configured DSP for IPC-only mode [ 8.032864] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd [ 8.041195] remoteproc remoteproc4: 4d81800000.dsp is available [ 8.043952] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe [ 8.060241] remoteproc remoteproc4: attaching to 4d81800000.dsp [ 8.099593] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc [ 8.109099] img_dec 4300000.video-decoder: decoder registered as /dev/video0 [ 8.111401] remoteproc remoteproc3: 5d00000.r5f is available [ 8.117691] rproc-virtio rproc-virtio.14.auto: assigned reserved memory node c66-dma-memory@a6000000 [ 8.123595] remoteproc remoteproc3: attaching to 5d00000.r5f [ 8.139277] virtio_rpmsg_bus virtio3: rpmsg host is online [ 8.144917] rproc-virtio rproc-virtio.15.auto: assigned reserved memory node r5f-dma-memory@a3000000 [ 8.160044] rproc-virtio rproc-virtio.14.auto: registered virtio3 (type 7) [ 8.166599] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd [ 8.181460] remoteproc remoteproc4: remote processor 4d81800000.dsp is now attached [ 8.187003] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe [ 8.197920] virtio_rpmsg_bus virtio4: rpmsg host is online [ 8.205806] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xd [ 8.216128] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma-memory@a8000000 [ 8.221634] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xe [ 8.237503] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 8.237699] remoteproc remoteproc5: 64800000.dsp is available [ 8.250722] rproc-virtio rproc-virtio.15.auto: registered virtio4 (type 7) [ 8.258295] remoteproc remoteproc5: attaching to 64800000.dsp [ 8.264035] remoteproc remoteproc3: remote processor 5d00000.r5f is now attached Starting Permit User Sessions... [ 8.278764] remoteproc remoteproc5: unsupported resource 65538 [ 8.278941] img_enc 4200000.video-encoder: encoder registered as /dev/video1 [ 8.302952] rproc-virtio rproc-virtio.16.auto: assigned reserved memory node c71-dma-memory@a8000000 [ 8.312665] virtio_rpmsg_bus virtio5: rpmsg host is online [ 8.318260] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xd [ 8.318437] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xe [ 8.318499] platform 5e00000.r5f: configured R5F for IPC-only mode [ 8.318527] rproc-virtio rproc-virtio.16.auto: registered virtio5 (type 7) [ 8.318532] remoteproc remoteproc5: remote processor 64800000.dsp is now attached [ 8.318747] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memory@a4000000 [ 8.331807] remoteproc remoteproc6: 5e00000.r5f is available [ 8.331871] remoteproc remoteproc6: attaching to 5e00000.r5f [ 8.332467] m_can_platform 2701000.can: m_can device registered (irq=826, version=32) [ 8.332579] rproc-virtio rproc-virtio.17.auto: assigned reserved memory node r5f-dma-memory@a4000000 [ 8.334603] m_can_platform 2751000.can: m_can device registered (irq=827, version=32) [ 8.336985] m_can_platform 2791000.can: m_can device registered (irq=828, version=32) [ 8.350471] m_can_platform 40528000.can: m_can device registered (irq=829, version=32) [ OK ] Finished Permit User Sessions. [ 8.482547] gpio-mux mux-controller: 2-way mux-controller registered [ 8.491236] virtio_rpmsg_bus virtio6: rpmsg host is online [ 8.497184] rproc-virtio rproc-virtio.17.auto: registered virtio6 (type 7) [ 8.502417] virtio_rpmsg_bus virtio6: creating channel ti.ipc4.ping-pong addr 0xd [ 8.504584] remoteproc remoteproc6: remote processor 5e00000.r5f is now attached [ OK ] Started Getty on tty1. [ 8.526378] platform 5f00000.r5f: configured R5F for IPC-only mode [ 8.528044] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 1 [ 8.534632] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memory@a5000000 [ 8.563305] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xe [ 8.602951] remoteproc remoteproc7: 5f00000.r5f is available [ OK ] Reached target Login Prompts.[ 8.613822] remoteproc remoteproc7: attaching to 5f00000.r5f [ 8.643409] Console: switching to colour frame buffer device 240x67 [ 8.670022] rproc-virtio rproc-virtio.18.auto: assigned reserved memory node r5f-dma-memory@a5000000 [ 8.682709] tidss 4a00000.dss: [drm] fb0: tidssdrmfb frame buffer device Starting Synchronize System and HW clocks.[ 8.697047] virtio_rpmsg_bus virtio7: rpmsg host is online .. Starting Weston, a Wayland compositor, as a sy[ 8.708969] virtio_rpmsg_bus virtio7: creating channel ti.ipc4.ping-pong addr 0xd stem service... [ 8.719769] virtio_rpmsg_bus virtio7: creating channel rpmsg_chrdev addr 0xe [ 8.730326] rproc-virtio rproc-virtio.18.auto: registered virtio7 (type 7) [ 8.737239] cdns-mhdp8546 a000000.dp-bridge: get block[0] edid failed: -22 [ 8.746186] remoteproc remoteproc7: remote processor 5f00000.r5f is now attached [ OK ] Started LLDP daemon. [ OK ] Created slice Slice /system/tee-supplicant. [ OK ] Started TEE Supplicant on teepriv0. [ 8.918278] cdns-mhdp8546 a000000.dp-bridge: Failed to read receiver capabilities [ 8.934891] remoteproc remoteproc8: b034000.pru is available [ 8.982986] remoteproc remoteproc9: b004000.rtu is available [ 9.013358] remoteproc remoteproc10: b00a000.txpru is available Starting Virtual Console Setup... [ 9.067073] remoteproc remoteproc11: b038000.pru is available [ 9.078601] remoteproc remoteproc12: b006000.rtu is available [ OK ] Created slice User Slice of UID 1000. [ 9.132387] remoteproc remoteproc13: b00c000.txpru is available Starting User Runtime Directory /run/user/1000... [ 9.155078] remoteproc remoteproc14: b134000.pru is available [ 9.171032] remoteproc remoteproc15: b104000.rtu is available [ 9.198040] remoteproc remoteproc16: b10a000.txpru is available [ OK ] Finished User Runtime Directory /run/user/1000. [ 9.233775] remoteproc remoteproc17: b138000.pru is available Starting User Manager for UID 1000... [ 9.255788] remoteproc remoteproc18: b106000.rtu is available [ 9.275413] remoteproc remoteproc19: b10c000.txpru is available [ 9.286178] cdns-mhdp8546 a000000.dp-bridge: Failed to read receiver capabilities [ 9.324029] cdns-mhdp8546 a000000.dp-bridge: get block[0] edid failed: -22 [ OK ] Finished Virtual Console Setup. [ 9.442076] m_can_platform 2751000.can main_mcan5: renamed from can1 [ OK ] Finished Synchronize System and HW clocks. [ 9.470159] m_can_platform 2701000.can main_mcan0: renamed from can0 [ 9.551543] m_can_platform 2791000.can main_mcan9: renamed from can2 [ 9.573737] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller [ OK ] Stopped Virtual Console Setup. Stopping Virtual Console Setup... Starting Virtual Console Setup... [ 9.631700] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 1 [ 9.696053] m_can_platform 40528000.can mcu_mcan0: renamed from can3 [ 9.718144] xhci-hcd xhci-hcd.19.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000008010 [ OK ] Finished Virtual Console Setup. [ 9.781251] xhci-hcd xhci-hcd.19.auto: irq 850, io mem 0x06410000 [ 9.812489] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller [ 9.836343] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 2 [ 9.852760] xhci-hcd xhci-hcd.19.auto: Host supports USB 3.0 SuperSpeed [ 9.871660] hub 1-0:1.0: USB hub found [ 9.877423] hub 1-0:1.0: 1 port detected [ 9.882777] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.891734] hub 2-0:1.0: USB hub found [ 9.895634] hub 2-0:1.0: 1 port detected [ OK ] Reached target Hardware activated USB gadget. [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ OK ] Created slice Slice /system/systemd-fsck. Expecting device /dev/mmcblk1p1... [ 10.416253] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ 10.573603] hub 1-1:1.0: USB hub found [ 10.577456] hub 1-1:1.0: 4 ports detected [ 10.678869] usbcore: registered new device driver onboard-usb-hub [ 10.700246] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 10.725347] hub 2-1:1.0: USB hub found [ 10.729660] hub 2-1:1.0: 4 ports detected [ 10.736693] hub 2-1:1.0: USB hub found [ 10.740559] hub 2-1:1.0: 4 ports detected [ 10.840840] hub 1-1:1.0: USB hub found [ 10.844729] hub 1-1:1.0: 4 ports detected [ 10.852263] hub 1-1:1.0: USB hub found [ 10.856099] hub 1-1:1.0: 4 ports detected [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/boot-mmcblk1p1... [ 10.950432] hub 2-1:1.0: USB hub found [ 10.954964] hub 2-1:1.0: 4 ports detected [ OK ] Mounted /run/media/boot-mmcblk1p1. [ OK ] Started containerd container runtime. [ 12.453820] PVR_K: 441: RGX Firmware image 'rgx.fw.22.104.208.318' loaded [ 12.473119] PVR_K: 441: Shader binary image 'rgx.sh.22.104.208.318' loaded [ OK ] Started Weston, a Wayland compositor, as a system service. [ OK ] Started SocketAPI services. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb glmark2 grub-common grub-editenv grub-efi gzip kbd-keymaps-pine less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgmp-dev libgmp10 libgmpxx4 libgnutls-dev libgnutls-openssl27 libidn2-0 libidn2-dev libmpc3 libmpfr6 libopcodes libreadline8 libstdc++-dev libstdc++6 libtasn1-dev libunistring-dev libunistring5 make nettle-dev nettle parted qtbase-plugins qtbase-qmlplugins qtbase qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Arago 2023.10 j721e-sk ttyS2 j721e-sk login: root [ 20.454415] kauditd_printk_skb: 8 callbacks suppressed [ 20.454422] audit: type=1006 audit(1728497601.016:16): pid=789 uid=0 subj=kernel old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 20.473258] audit: type=1300 audit(1728497601.016:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe2c633b8 a2=1 a3=1 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" subj=kernel key=(null) [ 20.501037] audit: type=1327 audit(1728497601.016:16): proctitle="(systemd)" [ 20.508749] audit: type=1334 audit(1728497601.036:17): prog-id=18 op=LOAD [ 20.516016] audit: type=1300 audit(1728497601.036:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffffe0f9748 a2=90 a3=0 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) [ 20.542984] audit: type=1327 audit(1728497601.036:17): proctitle="(systemd)" [ 20.550274] audit: type=1334 audit(1728497601.064:18): prog-id=18 op=UNLOAD [ 20.557509] audit: type=1300 audit(1728497601.064:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffffa6840c60 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) [ 20.584389] audit: type=1327 audit(1728497601.064:18): proctitle="(systemd)" [ 20.591633] audit: type=1334 audit(1728497601.064:19): prog-id=19 op=LOAD root@j721e-sk:~# dmesg | grep tty [ 0.000223] printk: console [tty0] enabled [ 0.277372] 42300000.serial: ttyS0 at MMIO 0x42300000 (irq = 206, base_baud = 3000000) is a 8250 [ 0.277984] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 207, base_baud = 6000000) is a 8250 [ 0.278541] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 208, base_baud = 3000000) is a 8250 [ 0.278580] printk: console [ttyS2] enabled [ 2.309784] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 209, base_baud = 3000000) is a 8250 [ 4.379259] systemd[1]: Created slice Slice /system/getty. [ 4.425351] systemd[1]: Created slice Slice /system/serial-getty. [ 4.520254] systemd[1]: Expecting device /dev/ttyS2... [ 20.454422] audit: type=1006 audit(1728497601.016:16): pid=789 uid=0 subj=kernel old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 20.473258] audit: type=1300 audit(1728497601.016:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe2c633b8 a2=1 a3=1 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" subj=kernel key=(null) [ 20.516016] audit: type=1300 audit(1728497601.036:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffffe0f9748 a2=90 a3=0 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) [ 20.557509] audit: type=1300 audit(1728497601.064:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffffa6840c60 items=0 ppid=1 pid=789 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) root@j721e-sk:~# cat proc/tty/driver/serial cat: proc/tty/driver/serial: No such file or directory root@j721e-sk:~# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:8250 mmio:0x42300000 irq:206 tx:0 rx:0 DSR 1: uart:8250 mmio:0x40A00000 irq:207 tx:0 rx:0 DSR 2: uart:8250 mmio:0x02800000 irq:208 tx:14585 rx:295 RTS|CTS|DTR 3: uart:8250 mmio:0x02810000 irq:209 tx:0 rx:0 DSR 4: uart:unknown port:00000000 irq:0 5: uart:unknown port:00000000 irq:0 6: uart:unknown port:00000000 irq:0 7: uart:unknown port:00000000 irq:0 8: uart:unknown port:00000000 irq:0 9: uart:unknown port:00000000 irq:0 10: uart:unknown port:00000000 irq:0 11: uart:unknown port:00000000 irq:0 root@j721e-sk:~# U-Boot SPL 2024.04-ti-gfb66753ebf09 (Apr 14 2025 - 09:47:00 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.11.0(release):v2.11.0-906-g58b25570c9-dirty NOTICE: BL31: Built : 04:20:32, Nov 1 2024 I/TC: I/TC: OP-TEE version: 4.4.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Oct 18 17:45:27 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: HUK Initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2024.04-ti-gfb66753ebf09 (Apr 09 2025 - 06:53:19 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 error getting GPIO lookup name: -22 Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2024.04-ti-gfb66753ebf09 (Apr 09 2025 - 06:53:19 +0000) SoC: J721E SR2.0 GP Model: Texas Instruments J721E SK EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Board: J721EX-PM1-SOM rev E2 DRAM: 2 GiB (effective 4 GiB) Core: 125 devices, 33 uclasses, devicetree: separate Flash: 0 Bytes MMC: mmc@4fb0000: 1 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 EEPROM not available at 0x50, trying to read at 0x51 Reading on-board EEPROM at 0x51 failed -1 Net: Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000port@1: phy_connect() failed No ethernet found. Hit space key to stop autoboot switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 1296 bytes read in 30 ms (42 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... 1 bytes read in 29 ms (0 Bytes/s) Already setup. GPIO: 'gpio@22_17' not found Command 'gpio' failed: Error -22 GPIO: 'gpio@22_16' not found Command 'gpio' failed: Error -22 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work 89944 bytes read in 39 ms (2.2 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 38 ms (2.3 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 39 ms (2.2 MiB/s) Load Remote Processor 4 with data@addr=0x82000000 89944 bytes: Success! 89944 bytes read in 38 ms (2.3 MiB/s) Load Remote Processor 5 with data@addr=0x82000000 89944 bytes: Success! 148732 bytes read in 39 ms (3.6 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 148732 bytes: Success! 148732 bytes read in 40 ms (3.5 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 148732 bytes: Success! 10488888 bytes read in 46 ms (217.5 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 10488888 bytes: Success! 19677696 bytes read in 419 ms (44.8 MiB/s) 124361 bytes read in 34 ms (3.5 MiB/s) Working FDT set to 88000000 2300 bytes read in 33 ms (67.4 KiB/s) failed on fdt_overlay_apply(): FDT_ERR_NOTFOUND 2405 bytes read in 32 ms (73.2 KiB/s) failed on fdt_overlay_apply(): FDT_ERR_BADMAGIC base fdt does not have a /__symbols__ node make sure you've compiled with -@ ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': No EFI system partition No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000ethernet@46000: phy_connect() failed Could not get PHY for mdio@f00: addr 0 am65_cpsw_nuss_port ethernet@46000000ethernet@46000: phy_connect() failed 0 efi_mgr ready (none) 0 ** Booting bootflow '' with efi_mgr Booting: mmc 1 error: no such device: ((hd0,msdos1)/EFI/BOOT)/EFI/BOOT/grub.cfg. error: serial port `com0' isn't found. GNU GRUB version 2.12 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x*boot x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Use the ▲ and ▼ keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. EFI stub: Booting Linux Kernel... EFI stub: EFI_RNG_PROTOCOL unavailable EFI stub: Using DTB from configuration table EFI stub: Exiting boot services... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 6.6.44-ti (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP PREEMPT Thu Apr 17 06:52:28 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Texas Instruments J721E SK [ 0.000000] efi: EFI v2.10 by Das U-Boot [ 0.000000] efi: RTPROP=0xfce4a040 SMBIOS 3.0=0xfdeb2000 MEMRESERVE=0xfce1c040 [ 0.000000] Reserved memory: created CMA memory pool at 0x00000008e0000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000008e0000000..0x00000008ffffffff (524288 KiB) map reusable linux,cma [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000fce49fff] [ 0.000000] node 0: [mem 0x00000000fce4a000-0x00000000fce4afff] [ 0.000000] node 0: [mem 0x00000000fce4b000-0x00000000fce4bfff] [ 0.000000] node 0: [mem 0x00000000fce4c000-0x00000000fce6dfff] [ 0.000000] node 0: [mem 0x00000000fce6e000-0x00000000fdeb1fff] [ 0.000000] node 0: [mem 0x00000000fdeb2000-0x00000000fdeb2fff] [ 0.000000] node 0: [mem 0x00000000fdeb3000-0x00000000ffeaffff] [ 0.000000] node 0: [mem 0x00000000ffeb0000-0x00000000ffebffff] [ 0.000000] node 0: [mem 0x00000000ffec0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 20 pages/cpu s43176 r8192 d30552 u81920 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: BOOT_IMAGE=/Image root=PARTUUID=076c4a2a-02 rootwait rootfstype=ext4 [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/Image", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x00000000f8e1a000-0x00000000fce1a000] (64MB) [ 0.000000] Memory: 3302472K/4194304K available (11648K kernel code, 1232K rwdata, 3832K rodata, 2368K init, 514K bss, 367544K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000880040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.000221] Console: colour dummy device 80x25 [ 0.000227] printk: console [tty0] enabled [ 0.000627] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.000637] pid_max: default: 32768 minimum: 301 [ 0.000683] LSM: initializing lsm=capability,selinux,integrity [ 0.000703] SELinux: Initializing. [ 0.000780] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000798] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001680] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.001738] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. [ 0.001852] rcu: Hierarchical SRCU implementation. [ 0.001859] rcu: Max phase no-delay instances is 1000. [ 0.002045] Platform MSI: msi-controller@1820000 domain created [ 0.002398] Remapping and enabling EFI services. [ 0.002542] smp: Bringing up secondary CPUs ... [ 0.011129] Detected PIPT I-cache on CPU1 [ 0.011174] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.011186] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 [ 0.011217] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.011292] smp: Brought up 1 node, 2 CPUs [ 0.011314] SMP: Total of 2 processors activated. [ 0.011319] CPU features: detected: 32-bit EL0 Support [ 0.011323] CPU features: detected: CRC32 instructions [ 0.011393] CPU: All CPU(s) started at EL2 [ 0.011398] alternatives: applying system-wide alternatives [ 0.012228] devtmpfs: initialized [ 0.019813] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.019845] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.026363] pinctrl core: initialized pinctrl subsystem [ 0.026706] SMBIOS 3.7.0 present. [ 0.026720] DMI: ti Texas Instruments J721E SK/Texas Instruments J721E SK, BIOS 2024.04-ti-gfb66753ebf09 04/01/2024 [ 0.027063] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027731] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.027827] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.027914] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.027943] audit: initializing netlink subsys (disabled) [ 0.028051] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 [ 0.028223] thermal_sys: Registered thermal governor 'step_wise' [ 0.028227] thermal_sys: Registered thermal governor 'power_allocator' [ 0.028250] cpuidle: using governor menu [ 0.028326] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.028358] ASID allocator initialised with 65536 entries [ 0.038200] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.038378] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.038416] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000 [ 0.040194] platform a000000.dp-bridge: Fixed dependency cycle(s) with /connector [ 0.040239] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000 [ 0.040481] platform hdmi-connector: Fixed dependency cycle(s) with /dvi-bridge [ 0.040518] platform 4a00000.dss: Fixed dependency cycle(s) with /dvi-bridge [ 0.040547] platform dvi-bridge: Fixed dependency cycle(s) with /hdmi-connector [ 0.040586] platform dvi-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000 [ 0.040846] Modules: 27824 pages in range for non-PLT usage [ 0.040850] Modules: 519344 pages in range for PLT usage [ 0.041259] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041272] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.041278] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.041283] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.041288] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041292] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.041297] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.041302] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.042002] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x2bb6402f] Detected [ 0.042490] iommu: Default domain type: Translated [ 0.042501] iommu: DMA domain TLB invalidation policy: strict mode [ 0.042641] SCSI subsystem initialized [ 0.042727] usbcore: registered new interface driver usbfs [ 0.042744] usbcore: registered new interface driver hub [ 0.042760] usbcore: registered new device driver usb [ 0.043022] pps_core: LinuxPPS API ver. 1 registered [ 0.043028] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.043037] PTP clock support registered [ 0.043139] EDAC MC: Ver: 3.0.0 [ 0.043413] scmi_core: SCMI protocol bus registered [ 0.043450] efivars: Registered efivars operations [ 0.043613] FPGA manager framework [ 0.044123] clocksource: Switched to clocksource arch_sys_counter [ 0.044247] VFS: Disk quotas dquot_6.6.0 [ 0.044266] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.047473] NET: Registered PF_INET protocol family [ 0.047624] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.049066] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.049108] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.049120] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.049260] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.050201] TCP: Hash tables configured (established 32768 bind 32768) [ 0.050302] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.050360] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.050511] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.050809] RPC: Registered named UNIX socket transport module. [ 0.050819] RPC: Registered udp transport module. [ 0.050823] RPC: Registered tcp transport module. [ 0.050828] RPC: Registered tcp-with-tls transport module. [ 0.050832] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.050839] NET: Registered PF_XDP protocol family [ 0.051497] Initialise system trusted keyrings [ 0.051607] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.051776] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.051897] NFS: Registering the id_resolver key type [ 0.051912] Key type id_resolver registered [ 0.051917] Key type id_legacy registered [ 0.051928] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.051934] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.065733] Key type asymmetric registered [ 0.065745] Asymmetric key parser 'x509' registered [ 0.065776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.065863] io scheduler mq-deadline registered [ 0.065871] io scheduler kyber registered [ 0.065892] io scheduler bfq registered [ 0.067988] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 [ 0.068489] pinctrl-single 11c000.pinctrl: 173 pins, size 692 [ 0.069090] pinctrl-single 104200.pinctrl: 20 pins, size 80 [ 0.069167] pinctrl-single 104280.pinctrl: 8 pins, size 32 [ 0.072415] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.074947] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001f8f) [ 0.075199] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq [ 0.075449] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq [ 0.076341] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs [ 0.079467] loop: module loaded [ 0.081713] tun: Universal TUN/TAP device driver, 1.6 [ 0.082151] VFIO - User Level meta-driver version: 0.3 [ 0.082715] usbcore: registered new interface driver usb-storage [ 0.083045] i2c_dev: i2c /dev entries driver [ 0.083669] sdhci: Secure Digital Host Controller Interface driver [ 0.083678] sdhci: Copyright(c) Pierre Ossman [ 0.083797] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.084156] ledtrig-cpu: registered to indicate activity on CPUs [ 0.084398] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.084810] usbcore: registered new interface driver usbhid [ 0.084817] usbhid: USB HID core driver [ 0.085489] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.085748] optee: probing for conduit method. [ 0.085767] optee: revision 4.4 (8f645256efc0dc66) [ 0.102228] optee: dynamic shared memory is enabled [ 0.102653] random: crng init done [ 0.102707] optee: initialized driver [ 0.103698] Initializing XFRM netlink socket [ 0.103730] NET: Registered PF_PACKET protocol family [ 0.103776] Key type dns_resolver registered [ 0.106835] registered taskstats version 1 [ 0.106899] Loading compiled-in X.509 certificates [ 0.113900] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.1.6--v10.01.06 (Fiery Fox)') [ 0.223011] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 0.223698] pca954x 1-0071: supply vdd not found, using dummy regulator [ 0.244318] i2c i2c-1: Added multiplexed i2c bus 2 [ 0.244418] i2c i2c-1: Added multiplexed i2c bus 3 [ 0.244427] pca954x 1-0071: registered 2 multiplexed busses for I2C switch pca9543 [ 0.244455] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz [ 0.244891] omap_i2c 2010000.i2c: bus 4 rev0.12 at 100 kHz [ 0.245357] pca954x 5-0070: supply vdd not found, using dummy regulator [ 0.268294] i2c i2c-5: Added multiplexed i2c bus 6 [ 0.268394] i2c i2c-5: Added multiplexed i2c bus 7 [ 0.268403] pca954x 5-0070: registered 2 multiplexed busses for I2C switch pca9543 [ 0.268431] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz [ 0.268860] omap_i2c 2050000.i2c: bus 8 rev0.12 at 400 kHz [ 0.269003] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created [ 0.269107] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created [ 0.269204] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created [ 0.269386] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created [ 0.278401] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 [ 0.278423] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 0.278429] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 0.280717] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 [ 0.280736] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 0.280742] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 0.281409] 42300000.serial: ttyS0 at MMIO 0x42300000 (irq = 206, base_baud = 3000000) is a 8250 [ 0.282046] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 207, base_baud = 6000000) is a 8250 [ 0.282635] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 208, base_baud = 3000000) is a 8250 [ 0.282684] printk: console [ttyS2] enabled [ 2.313844] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 209, base_baud = 3000000) is a 8250 [ 2.323863] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode [ 2.368127] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.376056] mdio_bus 46000f00.mdio: MDIO device at address 0 is missing. [ 2.382765] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 [ 2.395623] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 2.402834] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 2.409177] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0 [ 2.419541] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 2.700701] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 [ 2.706681] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock [ 2.966051] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) [ 2.977384] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) [ 2.992308] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 2.997398] 8 fixed-partitions partitions found on MTD device 47040000.spi.0 [ 3.004439] Creating 8 MTD partitions on "47040000.spi.0": [ 3.009915] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 3.016043] 0x000000080000-0x000000280000 : "ospi.tispl" [ 3.021858] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 3.027749] 0x000000680000-0x0000006c0000 : "ospi.env" [ 3.033376] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 3.039186] 0x0000007c0000-0x000000800000 : "ospi.env.backup" [ 3.045419] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 3.051294] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 3.057610] cadence-qspi 47040000.spi: Pattern not found. Skipping calibration. [ 3.065455] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode [ 3.112127] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 3.120052] mdio_bus 46000f00.mdio: MDIO device at address 0 is missing. [ 3.126759] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 [ 3.139627] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 3.146841] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 3.153164] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:0 [ 3.170565] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 3.184378] mmc1: CQHCI version 5.10 [ 3.186780] clk: Disabling unused clocks [ 3.194544] tps6594 0-004c: Error IRQ trap undervoltage for LDO1 [ 3.226685] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit [ 3.234275] Waiting for root device PARTUUID=076c4a2a-02... [ 3.288367] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 3.295267] mmcblk1: mmc1:aaaa SL32G 29.7 GiB [ 3.304076] mmcblk1: p1 p2 [ 3.324068] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 3.331382] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 3.696014] EXT4-fs (mmcblk1p2): orphan cleanup on readonly fs [ 3.702322] EXT4-fs (mmcblk1p2): recovery complete [ 3.713272] EXT4-fs (mmcblk1p2): mounted filesystem 96cb5726-6472-49d9-a610-6385e22c32b1 ro with ordered data mode. Quota mode: none. [ 3.725308] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.735499] devtmpfs: mounted [ 3.739382] Freeing unused kernel memory: 2368K [ 3.744005] Run /sbin/init as init process [ 4.028690] systemd[1]: System time before build time, advancing clock. [ 4.078610] NET: Registered PF_INET6 protocol family [ 4.084102] Segment Routing with IPv6 [ 4.087792] In-situ OAM (IOAM) with IPv6 [ 4.124833] systemd[1]: systemd 255.13^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.156799] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 4.176743] systemd[1]: Hostname set to . [ 4.438131] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 4.492866] systemd[1]: Queued start job for default target Graphical Interface. [ 4.527112] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 4.549335] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 4.573297] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 4.597062] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.620356] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.644286] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.668215] systemd[1]: Expecting device /dev/ttyS2... Expecting device /dev/ttyS2... [ 4.688229] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 4.708187] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.728182] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 4.748187] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 4.802641] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 4.828296] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 4.853416] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 4.876386] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 4.900781] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 4.924546] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.948527] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.964597] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.994003] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.016476] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.036477] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 5.092327] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 5.110333] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.136719] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.156488] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 5.174005] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 5.192647] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 5.232533] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 5.250443] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.276689] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.325289] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 5.337118] fuse: init (API version 7.39) [ 5.344579] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device.[ 5.356633] systemd[1]: Starting Journal Service... .. Starting Journal Service... [ 5.373278] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 5.409353] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network units from Kernel command line... [ 5.424439] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 5.442840] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System. [ 5.457423] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File Sy[ 5.464331] systemd[1]: Started RPC Bind. stem. [ 5.473891] systemd[1]: Mounted Kernel Debug File System. [ OK ] Started RPC Bind. [ 5.480300] systemd[1]: Mounted Temporary Directory /tmp. [ OK ] Mounted Kernel Debug File System 5.490014] cryptodev: loading out-of-tree module taints kernel. m. [ OK ] Mounted Temporary Directory /t[ 5.490620] systemd[1]: Finished Create List of Static Device Nodes. mp. [ 5.513707] cryptodev: driver 1.14 loaded. [ OK ] Finished Create List of Static Devi[ 5.514273] systemd[1]: modprobe@configfs.service: Deactivated successfully. ce Nodes. [ 5.531529] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configf[ 5.538979] systemd[1]: modprobe@drm.service: Deactivated successfully. s. [ 5.550840] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm[ 5.557174] systemd-journald[108]: Collecting audit messages is enabled. . [ 5.557439] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 5.576831] systemd[1]: Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module fuse 5.583233] systemd[1]: Finished Load Kernel Modules. m. [ 5.595016] systemd[1]: Finished Generate network units from Kernel command line. [ OK ] Finished Generate network units from Kernel command line. [ 5.632705] systemd[1]: Mounting FUSE Control File System... [ 5.644414] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 5.668006] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 5.684606] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... Starting Create Static Device Nodes in /dev gr[ 5.697713] systemd[1]: Started Journal Service. acefully... [ OK ] Started Journal Service. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished File System Check on Root Device. Starting Remount Root and Kernel File Systems... [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev gracefully. [ 5.827600] EXT4-fs (mmcblk1p2): re-mounted 96cb5726-6472-49d9-a610-6385e22c32b1 r/w. Quota mode: none. [ OK ] Finished Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev 5.889829] systemd-journald[108]: Received client request to flush runtime journal. m... [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... [ 6.021761] audit: type=1334 audit(1728487093.988:2): prog-id=6 op=LOAD Starting Rule-based Manager for Device Events [ 6.037244] audit: type=1334 audit(1728487093.996:3): prog-id=7 op=LOAD and Files... [ OK ] Mounted /var/volatile. Starting Load/Save OS Random Seed... [ OK ] Reached target Local File Systems. Starting Create System Files and Directories... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Load/Save OS Random Seed. [ OK ] Finished Create System Files and Directories. [ 6.227598] audit: type=1334 audit(1728487094.192:4): prog-id=8 op=LOAD Starting Network Name Resolution... [ 6.262147] audit: type=1334 audit(1728487094.228:5): prog-id=9 op=LOAD Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ 6.330497] audit: type=1334 audit(1728487094.296:6): prog-id=10 op=LOAD [ 6.337430] audit: type=1334 audit(1728487094.308:7): prog-id=11 op=LOAD [ 6.345097] audit: type=1334 audit(1728487094.312:8): prog-id=12 op=LOAD Starting User Database Manager... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started User Database Manager. [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Found device /dev/ttyS2. [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. Starting Weston socket... [ 6.927116] audit: type=1334 audit(1751353858.624:9): prog-id=13 op=LOAD Starting D-Bus System Message Bus... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Reached target Socket Units. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ 7.159257] dbus-broker-lau[279]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ OK ] Started Job spooling tools. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Periodic Command Scheduler. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ 7.292229] audit: type=1334 audit(1751353858.988:10): prog-id=14 op=LOAD [ 7.303086] audit: type=1334 audit(1751353859.000:11): prog-id=15 op=LOAD Starting User Login Management... Starting Telnet Server... [ OK ] Started Uart Manager. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ 7.396845] CAN device driver interface [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ 7.549046] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 7.556251] mc: Linux media interface: v0.10 [ OK ] Started User Login Management. [ 7.641709] videodev: Linux video capture interface: v2.00 [ 7.685012] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.688239] at24 0-0051: supply vcc not found, using dummy regulator [ 7.703211] PVR_K: 187: Device: 4e20000000.gpu [ 7.714440] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.714539] PVR_K: 187: Read BVNC 22.104.208.318 from HW device registers [ 7.720439] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 7.727023] PVR_K: 187: RGX Device registered with BVNC 22.104.208.318 [ 7.742768] at24 0-0051: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 7.758398] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.770635] [drm] Initialized pvr 24.1.6554834 20170530 for 4e20000000.gpu on minor 0 [ 7.776070] cfg80211: failed to load regulatory.db [ 7.820941] cdns-mhdp8546 a000000.dp-bridge: invalid resource (null) [ OK ] Started Network Configuration. [ OK ] Reached target Network. Starting containerd container runtime... Starting LLDP daemon... [ OK ] Started Netperf Benchmark Server 7.914177] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc m. Starting Permit User Sessions... [ 7.942424] img_enc 4200000.video-encoder: encoder registered as /dev/video1 [ 7.950341] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 7.978162] cdns-mhdp8546 a000000.dp-bridge: Failed to get SAPB memory resource, HDCP not supported [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Wayland compositor, as a system service... [ 8.127435] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 8.138384] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 8.170212] img_dec 4300000.video-decoder: decoder registered as /dev/video0 [ 8.212819] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ OK ] Started LLDP daemon. [ 8.264739] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 8.300371] platform 41000000.r5f: configured R5F for IPC-only mode [ 8.304479] m_can_platform 40528000.can: m_can device registered (irq=825, version=32) [ 8.307879] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 8.320796] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 [ 8.330479] m_can_platform 2701000.can: m_can device registered (irq=827, version=32) [ OK ] Finished Synchronize System and HW [ 8.346186] m_can_platform 2751000.can: m_can device registered (irq=828, version=32) clocks. [ 8.355653] remoteproc remoteproc0: 41000000.r5f is available [ 8.367968] remoteproc remoteproc0: attaching to 41000000.r5f [ 8.379225] m_can_platform 2791000.can: m_can device registered (irq=829, version=32) [ 8.381022] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node r5f-dma-memory@a0000000 [ 8.398487] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-dma-memory@a7000000 [ 8.411037] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ 8.419013] remoteproc remoteproc1: 4d80800000.dsp is available [ 8.426017] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.431779] remoteproc remoteproc1: attaching to 4d80800000.dsp [ 8.437802] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [ 8.445471] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 8.454498] rproc-virtio rproc-virtio.11.auto: registered virtio0 (type 7) [ 8.462884] remoteproc remoteproc0: remote processor 41000000.r5f is now attached [ 8.476514] gpio-mux mux-controller: 2-way mux-controller registered [ 8.495415] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node c66-dma-memory@a7000000 [ 8.517660] virtio_rpmsg_bus virtio1: rpmsg host is online [ 8.522793] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 8.526202] rproc-virtio rproc-virtio.12.auto: registered virtio1 (type 7) [ 8.530829] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 8.537696] remoteproc remoteproc1: remote processor 4d80800000.dsp is now attached [ 8.548903] platform 5c00000.r5f: configured R5F for IPC-only mode [ 8.559106] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-dma-memory@a6000000 [ 8.568896] k3-dsp-rproc 4d81800000.dsp: configured DSP for IPC-only mode [ 8.577049] remoteproc remoteproc3: 4d81800000.dsp is available [ 8.583734] remoteproc remoteproc3: attaching to 4d81800000.dsp [ 8.585916] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a2000000 [ 8.590653] rproc-virtio rproc-virtio.13.auto: assigned reserved memory node c66-dma-memory@a6000000 [ 8.607564] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.613229] rproc-virtio rproc-virtio.13.auto: registered virtio2 (type 7) [ 8.616773] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd [ 8.620175] remoteproc remoteproc3: remote processor 4d81800000.dsp is now attached [ 8.627696] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe [ 8.636102] remoteproc remoteproc2: 5c00000.r5f is available [ 8.648163] remoteproc remoteproc2: attaching to 5c00000.r5f [ 8.652272] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma-memory@a8000000 [ 8.654486] rproc-virtio rproc-virtio.14.auto: assigned reserved memory node r5f-dma-memory@a2000000 [ 8.671847] virtio_rpmsg_bus virtio3: rpmsg host is online [ 8.671876] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 8.677413] rproc-virtio rproc-virtio.14.auto: registered virtio3 (type 7) [ 8.684012] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xd [ 8.690871] remoteproc remoteproc2: remote processor 5c00000.r5f is now attached [ 8.705998] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xe [ OK ] Created slice Slice /system/tee-supplicant. [ 8.733088] remoteproc remoteproc4: 64800000.dsp is available [ 8.739683] platform 5d00000.r5f: configured R5F for IPC-only mode [ 8.746015] remoteproc remoteproc4: attaching to 64800000.dsp [ 8.746250] remoteproc remoteproc4: unsupported resource 65538 [ 8.746277] rproc-virtio rproc-virtio.15.auto: assigned reserved memory node c71-dma-memory@a8000000 [ 8.746631] virtio_rpmsg_bus virtio4: rpmsg host is online [ 8.772645] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xd [ 8.780271] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xe [ 8.793692] remoteproc remoteproc6: b034000.pru is available [ 8.799406] rproc-virtio rproc-virtio.15.auto: registered virtio4 (type 7) [ 8.812170] remoteproc remoteproc4: remote processor 64800000.dsp is now attached [ 8.813336] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000 [ OK ] Started TEE Supplicant on teepriv0 [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 1 [0m. [ 8.835372] remoteproc remoteproc5: 5d00000.r5f is available [ 8.850190] remoteproc remoteproc5: attaching to 5d00000.r5f [ 8.859641] rproc-virtio rproc-virtio.16.auto: assigned reserved memory node r5f-dma-memory@a3000000 [ 8.870839] virtio_rpmsg_bus virtio5: rpmsg host is online [ 8.876509] rproc-virtio rproc-virtio.16.auto: registered virtio5 (type 7) [ 8.883781] remoteproc remoteproc5: remote processor 5d00000.r5f is now attached [ 8.883987] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xd [ 8.899110] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xe [ 8.899536] remoteproc remoteproc7: b004000.rtu is available [ 8.906363] cdns-mhdp8546 a000000.dp-bridge: get block[0] edid failed: -22 [ 8.913660] remoteproc remoteproc8: b00a000.txpru is available [ 8.924102] platform 5e00000.r5f: configured R5F for IPC-only mode [ 8.924966] remoteproc remoteproc10: b038000.pru is available [ 8.937552] remoteproc remoteproc11: b006000.rtu is available [ 8.941518] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memory@a4000000 [ 8.944542] remoteproc remoteproc12: b00c000.txpru is available [ 8.958203] remoteproc remoteproc13: b134000.pru is available [ 8.964544] remoteproc remoteproc14: b104000.rtu is available [ 8.970959] remoteproc remoteproc9: 5e00000.r5f is available [ 8.971216] remoteproc remoteproc15: b10a000.txpru is available [ 8.979605] remoteproc remoteproc9: attaching to 5e00000.r5f [ 8.982983] remoteproc remoteproc16: b138000.pru is available [ 8.990345] rproc-virtio rproc-virtio.17.auto: assigned reserved memory node r5f-dma-memory@a4000000 [ OK ] Created slice User Slice of UID 100[ 9.006998] remoteproc remoteproc17: b106000.rtu is available 0. [ 9.015359] remoteproc remoteproc18: b10c000.txpru is available [ 9.016200] virtio_rpmsg_bus virtio6: rpmsg host is online [ 9.027619] virtio_rpmsg_bus virtio6: creating channel ti.ipc4.ping-pong addr 0xd [ 9.035415] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xe [ 9.044740] rproc-virtio rproc-virtio.17.auto: registered virtio6 (type 7) [ 9.051910] remoteproc remoteproc9: remote processor 5e00000.r5f is now attached Starting User Runtime Directory /run/user/1000[ 9.067307] platform 5f00000.r5f: configured R5F for IPC-only mode ... [ 9.077993] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memory@a5000000 [ 9.078708] remoteproc remoteproc19: 5f00000.r5f is available [ 9.078766] remoteproc remoteproc19: attaching to 5f00000.r5f [ 9.079006] rproc-virtio rproc-virtio.18.auto: assigned reserved memory node r5f-dma-memory@a5000000 [ 9.079475] virtio_rpmsg_bus virtio7: rpmsg host is online [ 9.079496] rproc-virtio rproc-virtio.18.auto: registered virtio7 (type 7) [ 9.079500] remoteproc remoteproc19: remote processor 5f00000.r5f is now attached [ 9.097118] virtio_rpmsg_bus virtio7: creating channel ti.ipc4.ping-pong addr 0xd [ 9.097312] virtio_rpmsg_bus virtio7: creating channel rpmsg_chrdev addr 0xe [ 9.173128] m_can_platform 2791000.can main_mcan9: renamed from can3 Starting Virtual Console Setup... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ 9.286579] m_can_platform 2751000.can main_mcan5: renamed from can2 [ 9.327367] m_can_platform 40528000.can mcu_mcan0: renamed from can0 [ 9.333824] cdns-mhdp8546 a000000.dp-bridge: Failed to read receiver capabilities [ 9.429205] m_can_platform 2701000.can main_mcan0: renamed from can1 [ 9.560730] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller [ 9.560754] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 1 [ 9.561211] xhci-hcd xhci-hcd.19.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000008010 [ 9.561253] xhci-hcd xhci-hcd.19.auto: irq 850, io mem 0x06410000 [ 9.561400] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller [ 9.561412] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 2 [ 9.561424] xhci-hcd xhci-hcd.19.auto: Host supports USB 3.0 SuperSpeed [ 9.565256] hub 1-0:1.0: USB hub found [ 9.565286] hub 1-0:1.0: 1 port detected [ 9.566778] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 9.567149] hub 2-0:1.0: USB hub found [ 9.567166] hub 2-0:1.0: 1 port detected [ 9.712709] cdns-mhdp8546 a000000.dp-bridge: Failed to read receiver capabilities [ 9.713114] Console: switching to colour frame buffer device 80x30 [ 9.825837] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 9.833540] tidss 4a00000.dss: [drm] fb0: tidssdrmfb frame buffer device [ OK ] Reached target Hardware activated USB gadget. [ OK ] Stopped Virtual Console Setup. Starting Virtual Console Setup... [ OK ] Finished Virtual Console Setup. [ OK ] Started User Manager for UID 1000 9.973671] hub 1-1:1.0: USB hub found 0m. [ 9.979744] hub 1-1:1.0: 4 ports detected [ OK ] Started Session c1 of User weston. [ 10.035137] usbcore: registered new device driver onboard-usb-hub [ 10.104212] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 10.129521] hub 2-1:1.0: USB hub found [ 10.134003] hub 2-1:1.0: 4 ports detected [ 10.141476] hub 2-1:1.0: USB hub found [ 10.146043] hub 2-1:1.0: 4 ports detected [ 10.196740] hub 1-1:1.0: USB hub found [ 10.201081] hub 1-1:1.0: 4 ports detected [ 10.208350] hub 1-1:1.0: USB hub found [ 10.212651] hub 1-1:1.0: 4 ports detected [ 10.356781] hub 2-1:1.0: USB hub found [ 10.361051] hub 2-1:1.0: 4 ports detected [ OK ] Created slice Slice /system/systemd-fsck. Expecting device /dev/mmcblk1p1... [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/boot-mmcblk1p1... [ OK ] Mounted /run/media/boot-mmcblk1p1. [ OK ] Started containerd container runtime. [ 12.376977] PVR_K: 424: RGX Firmware image 'rgx.fw.22.104.208.318' loaded [ 12.394043] PVR_K: 424: Shader binary image 'rgx.sh.22.104.208.318' loaded [ OK ] Started Weston, a Wayland compositor, as a system service. [ OK ] Started SocketAPI services. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb glmark2 grub-common grub-editenv grub-efi gzip kbd-keymaps-pine less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgmp-dev libgmp10 libgmpxx4 libgnutls-dev libgnutls-openssl27 libidn2-0 libidn2-dev libmpc3 libmpfr6 libopcodes libreadline8 libstdc++-dev libstdc++6 libtasn1-dev libunistring-dev libunistring5 make nettle-dev nettle parted qtbase-plugins qtbase-qmlplugins qtbase qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** Arago 2023.10 j721e-sk ttyS2 j721e-sk login: root [ 15.754564] kauditd_printk_skb: 8 callbacks suppressed [ 15.754572] audit: type=1006 audit(1751353867.452:16): pid=787 uid=0 subj=kernel old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 15.773811] audit: type=1300 audit(1751353867.452:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffea647978 a2=1 a3=1 items=0 ppid=1 pid=787 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" subj=kernel key=(null) [ 15.801363] audit: type=1327 audit(1751353867.452:16): proctitle="(systemd)" [ 15.808826] audit: type=1334 audit(1751353867.472:17): prog-id=18 op=LOAD [ 15.816066] audit: type=1300 audit(1751353867.472:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe6e03e88 a2=90 a3=0 items=0 ppid=1 pid=787 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) [ 15.843267] audit: type=1327 audit(1751353867.472:17): proctitle="(systemd)" [ 15.850619] audit: type=1334 audit(1751353867.500:18): prog-id=18 op=UNLOAD [ 15.858012] audit: type=1300 audit(1751353867.500:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffff9dcabc60 items=0 ppid=1 pid=787 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" subj=kernel key=(null) [ 15.884843] audit: type=1327 audit(1751353867.500:18): proctitle="(systemd)" [ 15.892054] audit: type=1334 audit(1751353867.500:19): prog-id=19 op=LOAD root@j721e-sk:~# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:8250 mmio:0x42300000 irq:206 tx:0 rx:0 DSR 1: uart:8250 mmio:0x40A00000 irq:207 tx:0 rx:0 DSR 2: uart:8250 mmio:0x02800000 irq:208 tx:12700 rx:160 RTS|CTS|DTR 3: uart:8250 mmio:0x02810000 irq:209 tx:0 rx:0 DSR 4: uart:unknown port:00000000 irq:0 5: uart:unknown port:00000000 irq:0 6: uart:unknown port:00000000 irq:0 7: uart:unknown port:00000000 irq:0 8: uart:unknown port:00000000 irq:0 9: uart:unknown port:00000000 irq:0 10: uart:unknown port:00000000 irq:0 11: uart:unknown port:00000000 irq:0 root@j721e-sk:~#