U-Boot SPL 2017.01-g590c7d7fe1 (Sep 26 2017 - 18:58:02) Trying to boot from MMC1 U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 18:58:02 -0400) I2C: ready DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB MMC: davinci: 0 In: serial Out: serial Err: serial Invalid MAC address read. Net: DaVinci-EMAC Warning: DaVinci-EMAC (eth0) using random MAC address - f2:e7:70:50:93:18 Hit any key to stop autoboot: 0 BOOTP broadcast 1 DHCP client bound to address 192.168.0.143 (26 ms) Using DaVinci-EMAC device TFTP from server 192.168.0.223; our IP address is 192.168.0.143 Filename 'zImage'. Load address: 0xc0700000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################# 420.9 KiB/s done Bytes transferred = 2497776 (261cf0 hex) Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 4.9.41-ge3a80a1c5c (user@userVM) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 PREEMPT Tue Feb 6 14:29:02 +06 2018 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f CPU: VIVT data cache, VIVT instruction cache Machine: AM18x/OMAP-L138 Hawkboard da8xx_rproc_reserve_cma: 'rproc_mem=nn@address' badly specified 'nn' and 'address' must both be non-zero cma: Reserved 16 MiB at 0xc6c00000 Memory policy: Data cache writethrough DaVinci da850/omap-l138/am18x variant 0x1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 Kernel command line: console=ttyS2,115200n8 rw noinitrd root=/dev/nfs nfsroot=192.168.0.223:/home/user/ti-processor-sdk-linux-omapl138-lcdk-04.01.00.06/targetNFS,nolock,rsize=1024,wsize=1024 ip=dhcp PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 106304K/131072K available (4796K kernel code, 315K rwdata, 1512K rodata, 228K init, 164K bss, 8384K reserved, 16384K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc04b7518 (4798 kB) .init : 0xc0633000 - 0xc066c000 ( 228 kB) .data : 0xc066c000 - 0xc06bae70 ( 316 kB) .bss : 0xc06bae70 - 0xc06e3f08 ( 165 kB) SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:245 clocksource: timer0_1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Console: colour dummy device 80x30 Calibrating delay loop... 227.32 BogoMIPS (lpj=1136640) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc0008400 - 0xc0008458 devtmpfs: initialized VFP support v0.3: not present clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu EMAC: MII PHY configured mux: initialized GPIO3_12 mux: Setting register GPIO3_12 mux: PINMUX7 (0x0000001c) = 0x00110110 -> 0x00118110 mux: initialized GPIO3_13 mux: Setting register GPIO3_13 mux: PINMUX7 (0x0000001c) = 0x00118110 -> 0x00118810 mux: initialized GPIO2_4 mux: Setting register GPIO2_4 mux: PINMUX6 (0x00000018) = 0x00000000 -> 0x00008000 mux: initialized GPIO6_13 mux: Setting register GPIO6_13 mux: PINMUX13 (0x00000034) = 0x00000000 -> 0x00000800 da8xx_register_rproc: memory not reserved for DSP, not registering DSP device omapl138_hawk_init: dsp/rproc registration failed: -12 edma edma.0: Legacy memcpy is enabled, things might not work edma edma.0: TI EDMA DMA engine driver edma edma.1: Legacy memcpy is enabled, things might not work edma edma.1: TI EDMA DMA engine driver usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb clocksource: Switched to clocksource timer0_1 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. workingset: timestamp_bits=14 max_order=15 bucket_order=1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) io scheduler noop registered (default) Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25, base_baud = 14250000) is a 16550A serial8250.1: ttyS1 at MMIO 0x1d0c000 (irq = 53, base_baud = 8250000) is a 16550A serial8250.2: ttyS2 at MMIO 0x1d0d000 (irq = 61, base_baud = 8250000) is a 16550A console [ttyS2] enabled brd: module loaded libphy: Fixed MDIO Bus: probed davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 davinci_mdio davinci_mdio.0: detected phy mask ffffff7f libphy: davinci_mdio.0: probed davinci_mdio davinci_mdio.0: phy[7]: device davinci_mdio-0:07, driver SMSC LAN8710/LAN8720 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-da8xx: DA8XX ohci-da8xx ohci-da8xx: USB Host Controller ohci-da8xx ohci-da8xx: new USB bus registered, assigned bus number 1 ohci-da8xx ohci-da8xx: irq 59, io mem 0x01e25000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usbtest i2c /dev entries driver davinci_mmc da830-mmc.0: cannot find GPIO chip davinci_gpio.1 davinci_mmc da830-mmc.0: cannot find GPIO chip davinci_gpio.1 davinci_mmc da830-mmc.0: Using DMA, 4-bit mode NET: Registered protocol family 10 sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver NET: Registered protocol family 17 console [netcon0] enabled netconsole: network logging started davinci_emac davinci_emac.1: using random MAC addr: 4a:a6:b6:67:46:86 hctosys: unable to open rtc device (rtc0) davinci_mdio davinci_mdio.0: resetting idled controller mmc0: host does not support reading read-only switch, assuming write-enable mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD8GB 7.42 GiB mmcblk0: p1 p2 SMSC LAN8710/LAN8720 davinci_mdio-0:07: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=davinci_mdio-0:07, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready random: fast init done davinci_emac davinci_emac.1 eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending DHCP requests .., OK IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.109 IP-Config: Complete: device=eth0, hwaddr=4a:a6:b6:67:46:86, ipaddr=192.168.0.109, mask=255.255.255.0, gw=192.168.0.1 host=192.168.0.109, domain=Dlink, nis-domain=(none) bootserver=192.168.0.1, rootserver=192.168.0.223, rootpath= nameserver0=192.168.0.1 VFS: Mounted root (nfs filesystem) on device 0:13. devtmpfs: mounted Freeing unused kernel memory: 228K (c0633000 - c066c000) This architecture does not have kernel memory protection. systemd[1]: System time before build time, advancing clock. systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! systemd[1]: Set hostname to . systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... Starting Create list of required st... nodes for the current kernel... Mounting POSIX Message Queue File System... Starting Setup Virtual Console... [ OK ] Listening on Journal Socket (/dev/log). cryptodev: loading out-of-tree module taints kernel. [ OK ] Listening on Network Service Netlink Socket. cryptodev: driver 1.8 loaded. Starting Remount Root and Kernel File Systems... [ OK ] Listening on Process Core Dump Socket. [ OK ] Reached target Remote File Systems. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Started Dispatch Password Requests to Console Directory Watch. Starting Journal Service... [ OK ] Reached target Swap. Mounting Temporary Directory... Mounting Debug File System... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. systemd[1]: Started Load Kernel Modules. [ OK ] Started Load Kernel Modules. systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel. systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... random: crng init done [ OK ] Started Apply Kernel Variables. systemd-journald[65]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting udev Kernel Device Manager... [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. davinci-wdt davinci-wdt: heartbeat 60 sec [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Listening on dropbear.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started System Logging Service. [ OK ] Started System Logger Daemon. Starting Print notice about GPLv3 packages... Starting Ethernet Bridge Filtering Tables... Starting telnetd.service... [ OK ] Started Kernel Logging Service. Starting tiipclad-daemon.service... Starting Login Service... [ OK ] Started D-Bus System Message Bus. Starting Network Service... [ OK ] Started Ethernet Bridge Filtering Tables. [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem EXT4-fs (mmcblk0p2): recovery complete EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Network Service. [ OK ] Found device /dev/ttyS2. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils cifs-utils cpp-symlinks cpp dosfstools g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gstreamer1.0-libav hidapi libgmp10 libidn11 libmpc3 libmpfr4 libreadline6 m4 make nettle If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Reached target Network. Starting Simple Network Management Protocol (SNMP) Daemon.... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Permit User Sessions... [ OK ] Started Vsftpd ftp daemon. Starting Lightning Fast Webserver With Light System Requirements... Starting Network Name Resolution... Starting thttpd.service... [ OK ] Started Permit User Sessions. [ OK ] Started Login Service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started Network Name Resolution. [ OK ] Started rng-tools.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org omapl138-lcdk ttyS2 Arago 2017.06 omapl138-lcdk ttyS2 omapl138-lcdk login: root root@omapl138-lcdk:~# lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub root@omapl138-lcdk:~#