U-Boot SPL 2021.01-g44a87e3ab8 (Feb 16 2023 - 17:59:39 +0000) DRA752-GP ES2.0 Trying to boot from MMC1 no pinctrl state for default mode Loading Environment from FAT... no pinctrl state for default mode OK U-Boot 2021.01-g44a87e3ab8 (Feb 16 2023 - 17:59:39 +0000) CPU : DRA752-GP ES2.0 Model: TI AM5728 IDK Board: AM572x IDK REV 1.3C DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... OK am57x_idk_lcd_detect: Failed to get I2C device 0/56 (ret 1) Net: Warning: ethernet@48484000 MAC addresses don't match: Address in ROM is e4:15:f6:0e:4f:ae Address in environment is 70:ff:76:1c:35:5b eth2: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device 574 bytes read in 9 ms (61.5 KiB/s) Importing environment from mmc0 ... ethernet@48484000 Waiting for PHY auto negotiation to complete.......... done link up on port 0, speed 1000, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.5.124 (7 ms) link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.5.64; our IP address is 192.168.5.124 Filename 'zImage'. Load address: 0x82000000 Loading: #T ################################################################ ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### 459 KiB/s done Bytes transferred = 5169664 (4ee200 hex) link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.5.64; our IP address is 192.168.5.124 Filename 'am572x-idk.dtb'. Load address: 0x88000000 Loading: #T ######################################## 40 KiB/s done Bytes transferred = 209063 (330a7 hex) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffc9000, end 8ffff0a6 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.100-g7a7a3af903 (oe-user@oe-host) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for 3 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5728 IDK [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000 [ 0.000000] OMAP4: Map 0x00000000afd00000 to (ptrval) for dram barrier [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afcfffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000afd00000-0x00000000ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afcfffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 16 pages/cpu s33228 r8192 d24116 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521798 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.5.64:/home/stranzjm/Projekte/ti-am57x/PROCESSOR-SDK-LINUX-AM57X/ti-psdk-08_02_01_00/targetNFS,nolock,v3,tcp,rsize=4096,wsp [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000aa93f000-0x00000000ae93f000] (64MB) [ 0.000000] Memory: 1801980K/2094080K available (10240K kernel code, 710K rwdata, 3464K rodata, 2048K init, 297K bss, 103684K reserved, 188416K cma-reserved, 1286144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4e0 with crng_init=0 [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.001312] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000 [ 0.001831] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@32000 [ 0.002929] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2a000 [ 0.003814] Console: colour dummy device 80x30 [ 0.003875] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664) [ 0.061920] pid_max: default: 32768 minimum: 301 [ 0.062042] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.062042] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.062622] CPU: Testing write buffer coherency: ok [ 0.062683] CPU0: Spectre v2: using ICIALLU workaround [ 0.062835] /cpus/cpu@0 missing clock-frequency property [ 0.062866] /cpus/cpu@1 missing clock-frequency property [ 0.062866] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.063354] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.063446] rcu: Hierarchical SRCU implementation. [ 0.063598] EFI services will not be available. [ 0.064147] smp: Bringing up secondary CPUs ... [ 0.124359] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.124389] CPU1: Spectre v2: using ICIALLU workaround [ 0.124511] smp: Brought up 1 node, 2 CPUs [ 0.124511] SMP: Total of 2 processors activated (3994.41 BogoMIPS). [ 0.124542] CPU: All CPU(s) started in HYP mode. [ 0.124542] CPU: Virtualization extensions available. [ 0.124908] devtmpfs: initialized [ 0.147552] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.147705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.147735] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.150604] pinctrl core: initialized pinctrl subsystem [ 0.151123] DMI not present or invalid. [ 0.151367] NET: Registered protocol family 16 [ 0.152465] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.155120] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.173217] thermal_sys: Registered thermal governor 'fair_share' [ 0.173217] thermal_sys: Registered thermal governor 'bang_bang' [ 0.173217] thermal_sys: Registered thermal governor 'step_wise' [ 0.173248] thermal_sys: Registered thermal governor 'user_space' [ 0.173980] cpuidle: using governor ladder [ 0.174011] cpuidle: using governor menu [ 2.574188] random: fast init done [ 3.149230] No ATAGs? [ 3.149291] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 3.149291] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 3.186187] reg-fixed-voltage fixedregulator-v3_3d: Failed to register regulator: -517 [ 3.186340] V1_2D: supplied by VMAIN [ 3.186859] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517 [ 3.188171] iommu: Default domain type: Translated [ 3.191558] SCSI subsystem initialized [ 3.192016] mc: Linux media interface: v0.10 [ 3.192047] videodev: Linux video capture interface: v2.00 [ 3.192108] pps_core: LinuxPPS API ver. 1 registered [ 3.192138] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.192138] PTP clock support registered [ 3.192169] EDAC MC: Ver: 3.0.0 [ 3.193298] Advanced Linux Sound Architecture Driver Initialized. [ 3.194091] clocksource: Switched to clocksource 32k_counter [ 3.200256] NET: Registered protocol family 2 [ 3.200378] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.201141] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.201171] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.201232] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.201354] TCP: Hash tables configured (established 8192 bind 8192) [ 3.201416] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 3.201446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 3.201568] NET: Registered protocol family 1 [ 3.201904] RPC: Registered named UNIX socket transport module. [ 3.201934] RPC: Registered udp transport module. [ 3.201934] RPC: Registered tcp transport module. [ 3.201934] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.201965] PCI: CLS 0 bytes, default 64 [ 3.203369] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.203521] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 3.204284] Initialise system trusted keyrings [ 3.204376] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 3.208190] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.208679] NFS: Registering the id_resolver key type [ 3.208679] Key type id_resolver registered [ 3.208709] Key type id_legacy registered [ 3.208770] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.208770] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.208801] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.209136] Key type asymmetric registered [ 3.209167] Asymmetric key parser 'x509' registered [ 3.209197] bounce: pool size: 64 pages [ 3.209228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 3.209228] io scheduler mq-deadline registered [ 3.209259] io scheduler kyber registered [ 3.725952] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 4.041015] OMAP GPIO hardware version 0.1 [ 4.274200] palmas 0-0058: Irq flag is 0x00000004 [ 4.306030] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 4.321258] smps12: supplied by regulator-dummy [ 4.322814] smps3: supplied by VMAIN [ 4.324432] smps45: supplied by regulator-dummy [ 4.326141] smps6: supplied by VMAIN [ 4.327697] smps7: supplied by VMAIN [ 4.329528] smps8: supplied by VMAIN [ 4.330322] smps9: supplied by VMAIN [ 4.331268] ldo1: supplied by VMAIN [ 4.333007] ldo2: supplied by VMAIN [ 4.334747] ldo3: supplied by VMAIN [ 4.336456] ldo4: supplied by VMAIN [ 4.338317] LDO5: supplied by regulator-dummy [ 4.338684] LDO6: supplied by regulator-dummy [ 4.339019] LDO7: supplied by regulator-dummy [ 4.339385] LDO8: supplied by regulator-dummy [ 4.339752] ldo9: supplied by VMAIN [ 4.341644] ldoln: supplied by VMAIN [ 4.343383] ldousb: supplied by VMAIN [ 4.360870] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.384887] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 4.386260] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 4.395904] edma 43300000.dma: memcpy is disabled [ 4.398620] edma 43300000.dma: TI EDMA DMA engine driver [ 4.415313] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 4.420440] dra7-pcie 51000000.pcie: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 4.420471] dra7-pcie 51000000.pcie: IO 0x0020003000..0x0020012fff -> 0x0000000000 [ 4.420532] dra7-pcie 51000000.pcie: MEM 0x0020013000..0x002fffffff -> 0x0020013000 [ 5.414794] dra7-pcie 51000000.pcie: Phy link never came up [ 5.414886] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 5.414916] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.414916] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 5.414947] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 5.414978] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 [ 5.415008] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 5.415008] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 5.415069] pci 0000:00:00.0: supports D1 [ 5.415100] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 5.422943] PCI: bus0: Fast back to back transfers disabled [ 5.430572] PCI: bus1: Fast back to back transfers enabled [ 5.430603] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 5.430603] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 5.430633] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 5.430938] pcieport 0000:00:00.0: PME: Signaling with IRQ 175 [ 5.481933] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 5.485809] printk: console [ttyS2] disabled [ 5.485961] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 112, base_baud = 3000000) is a 8250 [ 6.589508] printk: console [ttyS2] enabled [ 6.596588] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 6.603973] random: crng init done [ 6.607727] DSS: OMAP DSS rev 6.1 [ 6.636199] brd: module loaded [ 6.644805] loop: module loaded [ 6.656158] spi-nor spi0.0: s25fl256s1 (32768 Kbytes) [ 6.661285] 7 fixed-partitions partitions found on MTD device spi0.0 [ 6.667724] Creating 7 MTD partitions on "spi0.0": [ 6.672546] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 6.694732] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 6.701171] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 6.714691] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 6.724731] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 6.744659] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 6.751037] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 6.824188] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 6.835540] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 6.845275] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 6.855590] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4 [ 6.862426] cpsw-switch 48484000.switch: ALE Table size 1024 [ 6.868194] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies) [ 6.875823] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec [ 6.887054] cpsw-switch 48484000.switch: Detected MACID = e4:15:f6:0e:4f:ae [ 6.894042] cpsw-switch 48484000.switch: Detected MACID = e4:15:f6:0e:4f:af [ 6.902465] cpsw-switch 48484000.switch: initialized (regs 0x0000000048484000, pool size 256) hw_ver:0019010F 1.15 (0) [ 6.914184] i2c /dev entries driver [ 6.927368] sdhci: Secure Digital Host Controller Interface driver [ 6.933593] sdhci: Copyright(c) Pierre Ossman [ 6.939117] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.946319] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 6.955657] sdhci-omap 480b4000.mmc: failed to set system capabilities [ 6.964141] sdhci-omap 4809c000.mmc: Got CD GPIO [ 6.974426] ledtrig-cpu: registered to indicate activity on CPUs [ 6.984649] NET: Registered protocol family 10 [ 6.989715] Segment Routing with IPv6 [ 6.993438] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.999664] NET: Registered protocol family 17 [ 7.004333] Key type dns_resolver registered [ 7.008697] Registering SWP/SWPB emulation handler [ 7.013824] omap_voltage_late_init: Voltage driver support not added [ 7.020233] Power Management for TI OMAP4+ devices. [ 7.025482] Loading compiled-in X.509 certificates [ 7.050476] dmm 4e000000.dmm: workaround for errata i878 in use [ 7.057830] dmm 4e000000.dmm: initialized all PAT entries [ 7.063934] V3_3D: supplied by smps9 [ 7.068084] vtt_fixed: supplied by V3_3D [ 7.073211] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 7.080627] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 7.086853] platform 40800000.dsp: Adding to iommu group 0 [ 7.093353] omap-iommu 58882000.mmu: 58882000.mmu registered [ 7.099304] platform 58820000.ipu: Adding to iommu group 1 [ 7.105834] omap-iommu 55082000.mmu: 55082000.mmu registered [ 7.111755] platform 55020000.ipu: Adding to iommu group 2 [ 7.118286] omap-iommu 41501000.mmu: 41501000.mmu registered [ 7.125091] omap-iommu 41502000.mmu: 41502000.mmu registered [ 7.131134] platform 41000000.dsp: Adding to iommu group 3 [ 7.137786] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 7.145782] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 7.430633] [drm] Enabling DMM ywrap scrolling [ 7.482971] Console: switching to colour frame buffer device 240x67 [ 7.505950] omapdrm omapdrm.0: [drm] fb0: omapdrmdrmfb frame buffer device [ 7.513641] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 7.522949] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 7.531799] sdhci-omap 4809c000.mmc: Got CD GPIO [ 7.537384] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 7.546905] mmc0: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 7.570343] mmc1: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 7.578247] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac [ 7.635437] mmc0: new DDR MMC card at address 0001 [ 7.640655] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 7.641510] mmc1: new high speed SDHC card at address e624 [ 7.645416] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB [ 7.651153] mmcblk1: mmc1:e624 SC16G 14.8 GiB [ 7.656890] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB [ 7.667236] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (243:0) [ 7.671173] mmcblk1: p1 p2 [ 7.685485] Micrel KSZ9031 Gigabit PHY 48485000.mdio:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:00, irq=POLL) [ 7.705749] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac [ 7.805541] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=POLL) [ 11.865753] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off [ 11.874176] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.904174] Sending DHCP requests ., OK [ 11.958068] IP-Config: Got DHCP answer from 192.168.5.254, my address is 192.168.5.126 [ 11.966094] IP-Config: Complete: [ 11.969390] device=eth0, hwaddr=e4:15:f6:0e:4f:ae, ipaddr=192.168.5.126, mask=255.255.255.0, gw=192.168.5.254 [ 11.979827] host=192.168.5.126, domain=gins.local, nis-domain=(none) [ 11.986724] bootserver=0.0.0.0, rootserver=192.168.5.64, rootpath= [ 11.986724] nameserver0=192.168.2.230, nameserver1=192.168.2.228 [ 12.002685] ALSA device list: [ 12.005676] No soundcards found. [ 12.014648] VFS: Mounted root (nfs filesystem) on device 0:16. [ 12.020904] devtmpfs: mounted [ 12.025024] Freeing unused kernel memory: 2048K [ 12.084320] Run /sbin/init as init process [ 12.216369] systemd[1]: System time before build time, advancing clock. [ 12.235168] systemd[1]: systemd 244 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN) [ 12.256988] systemd[1]: Detected architecture arm. Welcome to Arago 2021.09! [ 12.355682] systemd[1]: Set hostname to . [ 12.872406] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 12.884918] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 12.896118] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 12.935668] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 12.974945] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 13.014434] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ��…ts to Console Directory Watch. [ 13.054412] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R��…uests to Wall Directory Watch. [ 13.094573] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 13.124237] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 13.164367] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 13.204254] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 13.235687] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 13.274444] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 13.321685] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 13.354370] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 13.421600] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 13.430938] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 13.464691] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 13.495513] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 13.535369] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 13.574676] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 13.614501] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 13.626007] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 13.667236] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 13.699676] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 13.735076] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 13.749450] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 13.788482] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 13.824768] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.837890] systemd[1]: Starting Journal Service... Starting Journal Service... [ 13.869293] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 13.895812] cmemk: loading out-of-tree module taints kernel. [ 13.902282] CMEMK module: reference Linux version 5.10.100 [ 13.910339] systemd[1]: Starting Remount Root and Kernel File Systems... [ 13.918121] no physical memory specified Starting Remount Root and Kernel File Systems 13.922576] cmemk initialized [0m... [ 13.938385] cryptodev: driver 1.10 loaded. [ 13.957550] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 13.979095] systemd[1]: Started Start psplash boot splash screen. [ OK ] Started Start psplash boot splash screen. [ 14.015228] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 14.054534] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... [ OK ] Started Start psplash-syst��…progress communication helper. Starting Flush Journal to Persistent Storage... [ 14.308776] systemd-journald[109]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Load/Save Random Seed. [ 14.975524] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 Starting udev Wait for Complete Device Initialization... [ 15.012817] remoteproc remoteproc0: 58820000.ipu is available [ 15.093658] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 [ 15.122772] remoteproc remoteproc1: 55020000.ipu is available [ 15.138092] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 15.183288] remoteproc remoteproc2: 40800000.dsp is available [ 15.243194] omap-rproc 41000000.dsp: assigned reserved memory node dsp2-memory@9f000000 [ 15.252471] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 15.269042] remoteproc remoteproc3: 41000000.dsp is available [ 15.308776] omap-sham 4b101000.sham: will run requests pump with realtime priority [ 15.309509] remoteproc remoteproc0: powering up 58820000.ipu [ 15.362792] remoteproc remoteproc1: powering up 55020000.ipu [ 15.382598] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3747240 [ 15.417907] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4899616 [ OK ] Started Create Volatile Files and Directories. [ 15.439544] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 15.449920] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 15.474975] omap-sham 42701000.sham: hw accel on OMAP rev 4.3 [ 15.481872] omap-sham 42701000.sham: will run requests pump with realtime priority [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ 15.562011] remoteproc remoteproc2: powering up 40800000.dsp [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ 15.632141] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 5583832 Starting Update UTMP about System Boot/Shutdown... [ 15.726715] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 15.756896] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ OK ] Started Update UTMP about System Boot/Shutdown. [ 15.812316] remoteproc remoteproc3: powering up 41000000.dsp [ OK ] Stopped Network Time Synchronization. [ 15.841003] remoteproc remoteproc3: Booting fw image dra7-dsp2-fw.xe66, size 5583960 [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ 15.955413] omap-iommu 41501000.mmu: 41501000.mmu: version 3.0 [ OK ] Stopped Network Time Synchronization. [ 15.990020] omap-iommu 41502000.mmu: 41502000.mmu: version 3.0 [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. [ 16.057189] remoteproc0#vdev0buffer: assigned reserved memory node ipu1-memory@9d000000 [ 16.116668] virtio_rpmsg_bus virtio0: rpmsg host is online [ 16.118164] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 16.126190] remoteproc0#vdev0buffer: registered virtio0 (type 7) [ 16.150848] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 16.151214] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 16.202880] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [FAILED] Failed to start Network Time Sync[ 16.219818] omap_gpio 48057000.gpio: Could not set line 16 debounce to 20000 microseconds (-22) hronization. [ 16.221771] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 16.247283] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: registered as rtc0 [ 16.257507] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: setting system clock to 2000-01-01T00:06:00 UTC (946685160) [ 16.272674] omap-des 480a5000.des: will run requests pump with realtime priority [ 16.299163] Driver for 1-wire Dallas network protocol. See 'systemctl status systemd-timesyncd.service' for details. [ 16.318572] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. [ 16.420806] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ 16.585998] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d [ 16.659545] omap_rtc 48838000.rtc: registered as rtc1 [ 16.692810] power_supply bq27000-battery: power_supply_get_battery_info currently only supports devicetree [ 16.868774] remoteproc1#vdev0buffer: assigned reserved memory node ipu2-memory@95800000 [ 16.953063] remoteproc2#vdev0buffer: assigned reserved memory node dsp1-memory@99000000 [ 16.974822] virtio_rpmsg_bus virtio1: rpmsg host is online [ 16.978027] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 16.981903] remoteproc1#vdev0buffer: registered virtio1 (type 7) [ 17.005615] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 17.049438] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 17.060119] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 17.069244] virtio_rpmsg_bus virtio2: rpmsg host is online [ 17.070831] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x32 [ 17.075469] remoteproc2#vdev0buffer: registered virtio2 (type 7) [ 17.084228] virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x33 [ 17.108489] virtio_rpmsg_bus virtio2: creating channel rpmsg-omx addr 0x3c [ 17.115753] virtio_rpmsg_bus virtio2: creating channel rpmsg-rpc addr 0x65 [ 17.124877] vpe 489d0000.vpe: Device registered as /dev/video0 [ 17.229644] ahci 4a140000.sata: supply ahci not found, using dummy regulator [ 17.235076] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 17.239868] ahci 4a140000.sata: supply phy not found, using dummy regulator [ 17.269805] remoteproc3#vdev0buffer: assigned reserved memory node dsp2-memory@9f000000 [ 17.281829] virtio_rpmsg_bus virtio3: rpmsg host is online [ 17.282897] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x32 [ 17.287414] remoteproc3#vdev0buffer: registered virtio3 (type 7) [ 17.287414] remoteproc remoteproc3: remote processor 41000000.dsp is now up [ 17.333099] ahci 4a140000.sata: supply target not found, using dummy regulator [ 17.383666] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 [ 17.408264] virtio_rpmsg_bus virtio3: creating channel rpmsg-client-sample addr 0x33 [ 17.425048] virtio_rpmsg_bus virtio3: creating channel rpmsg-omx addr 0x3c [ 17.434448] virtio_rpmsg_bus virtio3: creating channel rpmsg-rpc addr 0x65 [ 17.475097] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 17.515563] ahci 4a140000.sata: flags: 64bit ncq sntf pm led clo only pmp pio slum part ccc apst [ 17.593139] scsi host0: ahci [ 17.596466] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 35 [ 17.944763] ata1: SATA link down (SStatus 0 SControl 300) [ 18.180877] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 18.386993] CAN device driver interface [ 18.431701] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 18.438232] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=9ad7f05f, irq=111) [ 18.462646] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 18.525115] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 18.581634] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 18.600982] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 18.628631] mdio_bus 4b2b2400.mdio: MDIO device at address 1 is missing. [ 18.656524] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 18.863159] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 1 [ 19.047943] remoteproc remoteproc4: 4b234000.pru is available [ 19.066009] remoteproc remoteproc5: 4b238000.pru is available [ 19.098358] remoteproc remoteproc6: 4b2b4000.pru is available [ 19.123291] remoteproc remoteproc7: 4b2b8000.pru is available [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Found device /dev/mmcblk1p2. [ 20.831726] usbcore: registered new interface driver usbfs [ 20.838836] usbcore: registered new interface driver hub [ 20.846954] usbcore: registered new device driver usb [ OK ] Found device /dev/mmcblk1p1. [ 20.881958] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 20.888092] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 20.897430] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 20.907562] xhci-hcd xhci-hcd.2.auto: irq 190, io mem 0x48890000 [ 20.914062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 20.923919] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.936431] usb usb1: Product: xHCI Host Controller [ 20.941345] usb usb1: Manufacturer: Linux 5.10.100-g7a7a3af903 xhci-hcd [ 20.948394] usb usb1: SerialNumber: xhci-hcd.2.auto [ 20.953643] hub 1-0:1.0: USB hub found [ 20.958679] hub 1-0:1.0: 1 port detected [ 20.963714] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 20.970489] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 20.978698] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 20.986022] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 20.994415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 21.002716] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.010314] usb usb2: Product: xHCI Host Controller [ 21.015411] usb usb2: Manufacturer: Linux 5.10.100-g7a7a3af903 xhci-hcd [ 21.022094] usb usb2: SerialNumber: xhci-hcd.2.auto [ 21.027587] hub 2-0:1.0: USB hub found [ 21.031372] hub 2-0:1.0: 1 port detected [ OK ] Started udev Wait for Complete Device Initialization. [ 21.424224] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch. [ 21.696685] usb 2-1: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 [ 21.704956] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 21.712799] usb 2-1: Product: USB3.0 Hub [ 21.719482] usb 2-1: Manufacturer: VIA Labs, Inc. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ 21.754760] hub 2-1:1.0: USB hub found [ 21.758728] hub 2-1:1.0: 4 ports detected Starting File System Check on /dev/mmcblk1p1... Starting File System Check on /dev/mmcblk1p2... [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. [ OK ] Reached target 21.864257] usb 1-1: new high-speed USB device number 2 using xhci-hcd [0;1;39mSockets. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State... [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Reboot and dump vmcore via kexec... Starting rc.pvr.service... [FAILED] Failed to start Login Service. See 'systemctl status systemd-logind.service' for details. Starting TI IPC Daemon... [ OK ] Started Save/Restore Sound Card State. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Reached target Network (Pre). [ OK ] Reached target Sound Card. [ OK ] Stopped Login Service. [FAILED] Failed to start Login Service. See 'systemctl status systemd-logind.service' for details. Starting Network Service 22.027984] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] 0m... [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started TI IPC Daemon. [ OK ] Stopped Login Service. [FAILED] Failed to start Login Servic[ 22.056488] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 e. See 'systemctl status systemd-logind.service' for detail[ 22.065521] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 s. [ 22.078460] usb 1-1: Product: USB2.0 Hub [ 22.083740] usb 1-1: Manufacturer: VIA Labs, Inc. [ OK ] Started rc.pvr.service. [ OK ] Stopped Login Service. [FAILED] Failed to start Login Service. See 'systemctl status systemd-logind.service' for details. Starting weston.service... [ OK ] Started File System Check on /dev/m[ 22.139007] hub 1-1:1.0: USB hub found mcblk1p1. [ 22.148315] hub 1-1:1.0: 4 ports detected Mounting /run/media/mmcblk1p1... [ OK ] Stopped Login Service. [FAILED] Failed to start Login Service[ 22.194335] usb 2-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd . See 'systemctl status systemd-logind.service' for details. [ OK ] Stopped Login Service. [FAILED] Failed to start Login Service. See 'systemctl status systemd-logind.service' for details. [ OK ] Started Network Service. Starting Wait for Network to be Configured... [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma��…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Started Wait for Network to be Configured. [ OK ] Reached target Network is Online. Starting Lighttpd Daemon... [ OK ] Started strongSwan IPsec I��…IKEv2 daemon using ipsec.conf. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Started File System Check on /dev/mmcblk1p2. [ OK ] Mounted /run/media/mmcblk1p1. [ OK ] Started Permit User Sessions. [ OK ] Started Avahi mDNS/D[ 22.471099] usb 2-1.1: New USB device found, idVendor=2109, idProduct=0812, bcdDevice= b.e1 NS-SD Stack. [ 22.489318] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Mounting /run/media/mmcblk1p2... [ OK ] Started Getty on tty1.[ 22.515960] usb 2-1.1: Product: USB3.0 Hub [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts.[ 22.541900] usb 2-1.1: Manufacturer: VIA Labs, Inc. Starting Synchronize System and HW clocks... [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Started Enable an[ 22.584442] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd d configure wl18xx bluetooth stack. [ 22.603820] hub 2-1.1:1.0: USB hub found [ 22.609283] hub 2-1.1:1.0: 4 ports detected [ OK ] Stopped Network Name Resolution. [ 22.631072] EXT4-fs (mmcblk1p2): mounting ext3 file system using the ext4 subsystem [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Started Lighttpd Daemon. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name R[ 22.776367] usb 1-1.1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 esolution. See 'systemctl status systemd-resolved.service' [ 22.790802] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 for details. [ OK ] Started Synchronize S[ 22.803649] usb 1-1.1: Product: USB2.0 Hub ystem and HW clocks. [ 22.814666] usb 1-1.1: Manufacturer: VIA Labs, Inc. [ 22.824462] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /run/media/mmcblk1p2. [ 22.875518] hub 1-1.1:1.0: USB hub found [ 22.879821] hub 1-1.1:1.0: 4 ports detected [ OK ] Started Simple Network Man��…ement Protocol (SNMP) Daemon.. [ 23.019622] cryptd: max_cpu_qlen set to 1000 [ 23.064239] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd [ 23.256835] Initializing XFRM netlink socket [ OK ] Stopped Lighttpd Daemon. Starting Lighttpd Daemon... [ 23.278259] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00 [ 23.287200] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 23.294799] usb 1-1.2: Product: USB Optical Mouse [ 23.299835] usb 1-1.2: Manufacturer: Logitech [ OK ] Started Lighttpd Daemon. [ 23.389587] input: Logitech USB Optical Mouse as /devices/platform/44000000.ocp/48800000.interconnect/48800000.interconnect:segment@0/48880000.target-module/48880000.omap_dwc3_1/48890000.usb/xhci-hcd.2.auto/0 [ 23.413482] hid-generic 0003:046D:C077.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-xhci-hcd.2.auto-1.2/input0 [ 23.427734] usbcore: registered new interface driver usbhid [ 23.433380] usbhid: USB HID core driver [ 23.504150] usb 1-1.3: new low-speed USB device number 5 using xhci-hcd [ OK ] Stopped Lighttpd Daemon. Starting Lighttpd Daemon... [ OK ] Started Lighttpd Daemon. [ 23.709777] usb 1-1.3: New USB device found, idVendor=17ef, idProduct=6099, bcdDevice= 1.21 [ 23.718292] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 23.726257] usb 1-1.3: Product: Lenovo Traditional USB Keyboard [ 23.732238] usb 1-1.3: Manufacturer: Primax [ 23.774993] input: Primax Lenovo Traditional USB Keyboard as /devices/platform/44000000.ocp/48800000.interconnect/48800000.interconnect:segment@0/48880000.target-module/48880000.omap_dwc3_1/48890000.usb/xhci1 [ 23.864624] hid-generic 0003:17EF:6099.0002: input: USB HID v1.10 Keyboard [Primax Lenovo Traditional USB Keyboard] on usb-xhci-hcd.2.auto-1.3/input0 [ OK ] Stopped Lighttpd Daemon. Starting Lighttpd Daemon... [ OK ] Started Lighttpd Daemon. [ OK ] Stopped Lighttpd Daemon. Starting Lighttpd Daemon... [ OK ] Started Lighttpd Daemon. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext glmark2 gstreamer1.0-libav gzip less libasm1 libbfd libdw1 libelf1 libgdbm-compat4 libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libreadline8 libunistring2 m4 make nettle parted pdm-anomaly-detection tar which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Stopped Lighttpd Daemon. [FAILED] Failed to start Lighttpd Daemon. See 'systemctl status lighttpd.service' for details. [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started Matrix GUI. [ OK ] Started telnetd.service. Starting LSB: network benchmark... [ OK ] Started LSB: network benchmark. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Created slice system-systemd\x2dcoredump.slice. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [FAILED] Failed to start Process Core Dump (PID 1304/UID 0). See 'systemctl status systemd-coredump@0-1304-0.service' for details. [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm-tisdk-default-image ttyS2 Arago 2021.09 am57xx-evm-tisdk-default-image ttyS2 am57xx-evm-tisdk-default-image login: