U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42 -0400) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3B DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 3 ms (186.5 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3739976 bytes read in 252 ms (14.2 MiB/s) 102295 bytes read in 69 ms (1.4 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8fffff96 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.41-ge3a80a1c5c (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Tue Sep 26 19:14:57 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM571x IDK-LCD-OSD-Display [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef646000 s22156 r8192 d22900 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=879e002c-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644576K/848896K available (8192K kernel code, 315K rwdata, 2500K rodata, 2048K init, 304K bss, 24096K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104ed60 ( 316 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109c0f0 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000320] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000328] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000743] Console: colour dummy device 80x30 [ 0.000760] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000767] This ensures that you still see kernel messages. Please [ 0.000773] update your kernel commandline. [ 0.000789] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000801] pid_max: default: 32768 minimum: 301 [ 0.000903] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000914] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001522] CPU: Testing write buffer coherency: ok [ 0.001731] /cpus/cpu@0 missing clock-frequency property [ 0.001745] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001760] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080038] EFI services will not be available. [ 0.099924] Brought up 1 CPUs [ 0.099935] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099942] CPU: All CPU(s) started in HYP mode. [ 0.099949] CPU: Virtualization extensions available. [ 0.100329] devtmpfs: initialized [ 0.130075] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130328] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130344] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133725] pinctrl core: initialized pinctrl subsystem [ 0.134575] NET: Registered protocol family 16 [ 0.135437] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136361] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.360271] cpuidle: using governor ladder [ 0.390294] cpuidle: using governor menu [ 0.400464] OMAP GPIO hardware version 0.1 [ 0.415177] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.439630] No ATAGs? [ 0.439650] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.439659] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.440045] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.440055] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.440626] OMAP DMA hardware revision 0.0 [ 0.520993] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.522323] edma 43300000.edma: memcpy is disabled [ 0.527152] edma 43300000.edma: TI EDMA DMA engine driver [ 0.530954] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.531148] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.531301] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.531460] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.534358] palmas 0-0058: Irq flag is 0x00000004 [ 0.562370] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.565561] SMPS3: supplied by VMAIN [ 0.568894] SMPS6: supplied by VMAIN [ 0.570668] SMPS7: supplied by VMAIN [ 0.572568] SMPS8: supplied by VMAIN [ 0.573904] SMPS9: supplied by VMAIN [ 0.574850] V3_3D: supplied by smps9 [ 0.575081] vtt_fixed: supplied by V3_3D [ 0.575188] LDO1: supplied by VMAIN [ 0.581408] LDO2: supplied by VMAIN [ 0.581666] random: fast init done [ 0.591266] LDO3: supplied by VMAIN [ 0.601298] LDO4: supplied by VMAIN [ 0.613395] LDO9: supplied by VMAIN [ 0.621689] LDOLN: supplied by VMAIN [ 0.631393] LDOUSB: supplied by VMAIN [ 0.644724] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.644928] media: Linux media interface: v0.10 [ 0.644975] Linux video capture interface: v2.00 [ 0.645010] pps_core: LinuxPPS API ver. 1 registered [ 0.645017] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645038] PTP clock support registered [ 0.645075] EDAC MC: Ver: 3.0.0 [ 0.651287] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.651579] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.651873] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.652060] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.652411] Advanced Linux Sound Architecture Driver Initialized. [ 0.660903] clocksource: Switched to clocksource arch_sys_counter [ 0.670675] NET: Registered protocol family 2 [ 0.671230] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.671293] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.671418] TCP: Hash tables configured (established 8192 bind 8192) [ 0.671471] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.671502] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.671686] NET: Registered protocol family 1 [ 0.692050] RPC: Registered named UNIX socket transport module. [ 0.692060] RPC: Registered udp transport module. [ 0.692066] RPC: Registered tcp transport module. [ 0.692073] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693025] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.705711] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.713291] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.724030] NFS: Registering the id_resolver key type [ 0.724060] Key type id_resolver registered [ 0.724067] Key type id_legacy registered [ 0.724106] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725523] bounce: pool size: 64 pages [ 0.725679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725689] io scheduler noop registered [ 0.725697] io scheduler deadline registered [ 0.725834] io scheduler cfq registered (default) [ 0.731245] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.731317] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.731390] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.731401] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.744574] dra7-pcie 51000000.pcie: Linked as a consumer to phy-4a094000.pciephy.3 [ 0.744898] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.744910] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.744943] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.744963] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.740962] dra7-pcie 51000000.pcie: phy link never came up [ 1.741138] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.741151] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.741162] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.741172] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.741551] PCI: bus0: Fast back to back transfers disabled [ 1.741664] PCI: bus1: Fast back to back transfers enabled [ 1.741789] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.741805] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.741819] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.742051] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.743110] backlight supply power not found, using dummy regulator [ 1.799259] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802676] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.790125] console [ttyS2] enabled [ 2.795526] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.802304] [drm] Initialized [ 2.807033] OMAP DSS rev 6.1 [ 2.810373] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.818883] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.829240] display supply vcc not found, using dummy regulator [ 3.006356] brd: module loaded [ 3.094817] loop: module loaded [ 3.102188] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 3.107232] 7 ofpart partitions found on MTD device spi0.0 [ 3.112782] Creating 7 MTD partitions on "spi0.0": [ 3.117596] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 3.133800] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 3.150167] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 3.167161] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 3.183908] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 3.201324] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 3.217647] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 3.235103] libphy: Fixed MDIO Bus: probed [ 3.300936] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.307061] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 3.327908] libphy: 48485000.mdio: probed [ 3.331995] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 3.341731] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.352201] cpsw 48484000.ethernet: Detected MACID = 5c:f8:21:5f:0c:c2 [ 3.358850] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.367233] cpsw 48484000.ethernet: cpsw: Detected MACID = 5c:f8:21:5f:0c:c3 [ 3.375692] mousedev: PS/2 mouse device common for all mice [ 3.381614] i2c /dev entries driver [ 3.392396] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.461317] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.467698] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.541985] ledtrig-cpu: registered to indicate activity on CPUs [ 3.561971] NET: Registered protocol family 10 [ 3.577088] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.591300] NET: Registered protocol family 17 [ 3.595915] Key type dns_resolver registered [ 3.600285] omap_voltage_late_init: Voltage driver support not added [ 3.620981] Power Management for TI OMAP4+ devices. [ 3.626069] Registering SWP/SWPB emulation handler [ 3.660929] dmm 4e000000.dmm: initialized all PAT entries [ 3.692010] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.698652] [drm] No driver support for vblank timestamp query. [ 3.715671] [drm] Enabling DMM ywrap scrolling [ 3.748715] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.750295] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.760660] mmcblk0: mmc0:59b4 SS08G 7.41 GiB [ 3.761623] mmcblk0: p1 p2 [ 3.771350] mmc1: new DDR MMC card at address 0001 [ 3.781668] mmcblk1: mmc1:0001 R1J56L 13.8 GiB [ 3.800925] mmcblk1boot0: mmc1:0001 R1J56L partition 1 4.00 MiB [ 3.802289] Console: switching to colour frame buffer device 240x75 [ 3.824753] mmcblk1boot1: mmc1:0001 R1J56L partition 2 4.00 MiB [ 3.867343] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.902084] hctosys: unable to open rtc device (rtc0) [ 3.907791] ALSA device list: [ 3.910770] No soundcards found. [ 5.827855] EXT4-fs (mmcblk0p2): recovery complete [ 5.870766] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.878943] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.887496] devtmpfs: mounted [ 5.891910] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 6.038274] systemd[1]: System time before build time, advancing clock. [ 6.081873] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.100472] systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! [ 6.135435] systemd[1]: Set hostname to . [ 6.420787] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 6.428684] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 6.436437] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 6.444786] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 6.452234] systemd[1]: sysinit.target: Found dependency on dropbear.socket/stop [ 6.459674] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 6.467120] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ SKIP ] Ordering cycle found, skipping alignment.service [ OK ] Listening on Journal Socket. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Swap. [ OK ] Listening on Syslog Socket. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... Mounting Debug File System... [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Remote File Systems. Starting Journal Service... [ OK ] Created slice system-getty.slice. Mounting Temporary Directory... [ OK ] Reached target Paths. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on udev Kernel Socket. Starting Create Static Device Nodes in /dev... [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on udev Control Socket. Starting Setup Virtual Console... Starting Load Kernel Modules... [ 7.168607] cmemk: loading out-of-tree module taints kernel. [ 7.175144] CMEMK module: reference Linux version 4.9.41 [ 7.184141] cmemk initialized Starting Remount Root and Kernel File Systems... [ 7.208369] cryptodev: driver 1.8 loaded. [ 7.217168] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Listening on Network Service Netlink Socket. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Setup Virtual Console. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Apply Kernel Variables... Mounting Configuration File System... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 8.014248] systemd-journald[110]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 8.613346] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 8.657289] remoteproc remoteproc0: 58820000.ipu is available [ OK ] Started udev Coldplug all Devices. [ 8.731697] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Found device /dev/ttyS2. [ 8.863725] remoteproc remoteproc1: 55020000.ipu is available [ 8.919979] remoteproc remoteproc0: powering up 58820000.ipu [ 8.919988] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 8.920093] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 8.945308] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.945333] remoteproc remoteproc0: registered virtio0 (type 7) [ 8.945337] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 8.982079] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 8.982201] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 8.982293] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 8.982382] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 9.051674] ov2659 0-0030: Sensor detection failed (3030, 0) [ 9.190399] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 9.192886] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22) [ 9.378574] input: EP0790M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ OK ] Reached target System Initialization. [ 9.724234] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Listening on RPCbind Server Activation Socket. [ 9.775802] omap-des 480a5000.des: will run requests pump with realtime priority [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 9.814312] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc1 [ OK ] Listening on D-Bus System Message Bus Socket. [ 9.852597] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ OK ] Started Daily Cleanup of Temporary Directorie[ 9.873651] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 s. [ 9.886040] remoteproc remoteproc1: powering up 55020000.ipu [ 9.886049] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 [ 9.886125] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 9.891328] vpe 489d0000.vpe: Device registered as /dev/video0 [ 9.931555] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.133835] SCSI subsystem initialized [ OK ] Reached target Timers. [ 10.235304] remoteproc remoteproc2: 40800000.dsp is available [ 10.269556] CAN device driver interface [ 10.293289] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.293309] remoteproc remoteproc1: registered virtio1 (type 7) [ 10.293314] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 10.305650] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.305758] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ OK ] Listening on dropbear.socket. [ 10.403521] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 10.418772] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 10.430970] vip 48970000.vip: VPDMA firmware loaded [ OK ] Reached target Sockets. [ 10.463920] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [[ 10.511105] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst OK ] Reached target Basic System. [ OK ] Started Kernel Logging Service. [ 10.609703] scsi host0: ahci [ 10.615907] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 344 Starting Print notice about GPLv3 packages... [ OK ] Started D-Bus System Message Bus. [ 10.676107] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 10.735926] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 10.841179] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=352) [ 10.895428] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 10.934303] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 11.011514] ata1: SATA link down (SStatus 0 SControl 300) [ 11.038420] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 11.067622] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 11.153934] remoteproc remoteproc2: powering up 40800000.dsp [ 11.160100] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 11.233505] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 22220992 [ 11.277659] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.283553] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.289458] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.346933] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices Starting Network Service... Starting Telephony service... Starting Avahi mDNS/DNS-SD Stack... Starting Login Service... [ 11.449231] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 11.503903] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ OK ] Started System Logging Service. Starting uim-sysfs.service... Starting TI MultiCore Tools Daemon... [ 11.666943] virtio_rpmsg_bus virtio2: rpmsg host is online [ 11.767175] net eth1: initializing cpsw version 1.15 (0) [ 11.767180] net eth0: initialized cpsw ale version 1.4 [ 11.767183] net eth0: ALE Table size 1024 [ 11.770938] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 11.770942] libphy: 4b2b2400.mdio: probed [ 11.798111] Bluetooth: Core ver 2.22 [ 11.798148] NET: Registered protocol family 31 [ 11.798150] Bluetooth: HCI device and connection manager initialized [ 11.798160] Bluetooth: HCI socket layer initialized [ 11.798166] Bluetooth: L2CAP socket layer initialized [ 11.798187] Bluetooth: SCO socket layer initialized [ 11.890040] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 11.890045] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 11.900210] remoteproc remoteproc3: 4b234000.pru0 is available [ 11.900253] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 11.900425] remoteproc remoteproc4: 4b238000.pru1 is available [ 11.900463] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 11.900632] remoteproc remoteproc5: 4b2b4000.pru0 is available [ 11.900660] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 11.900821] remoteproc remoteproc6: 4b2b8000.pru1 is available [ 11.900852] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 12.236538] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=-1) [ 12.292868] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.293884] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized [ 12.327191] net eth0: initializing cpsw version 1.15 (0) [ 12.639828] Micrel KSZ9031 Gigabit PHY 48485000.mdio:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:00, irq=-1) [ 12.701970] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Network Service. [ OK ] Started TI MultiCore Tools Daemon. [ 14.093613] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service rpc_example_2 with src 1024 dst 101 [ 14.133840] remoteproc remoteproc2: registered virtio2 (type 7) [ 14.133845] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 14.143710] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d ▒▒▒ U-Boot SPL 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42) DRA722-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42 -0400) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3B DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 3 ms (186.5 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3739976 bytes read in 252 ms (14.2 MiB/s) 102295 bytes read in 69 ms (1.4 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8fffff96 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.41-ge3a80a1c5c (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Tue Sep 26 19:14:57 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM571x IDK-LCD-OSD-Display [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef646000 s22156 r8192 d22900 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=879e002c-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644576K/848896K available (8192K kernel code, 315K rwdata, 2500K rodata, 2048K init, 304K bss, 24096K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104ed60 ( 316 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109c0f0 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000321] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000329] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000744] Console: colour dummy device 80x30 [ 0.000761] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000767] This ensures that you still see kernel messages. Please [ 0.000773] update your kernel commandline. [ 0.000790] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000802] pid_max: default: 32768 minimum: 301 [ 0.000905] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000916] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001525] CPU: Testing write buffer coherency: ok [ 0.001735] /cpus/cpu@0 missing clock-frequency property [ 0.001748] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001764] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080034] EFI services will not be available. [ 0.099920] Brought up 1 CPUs [ 0.099930] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099938] CPU: All CPU(s) started in HYP mode. [ 0.099944] CPU: Virtualization extensions available. [ 0.100332] devtmpfs: initialized [ 0.130076] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130342] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133735] pinctrl core: initialized pinctrl subsystem [ 0.134594] NET: Registered protocol family 16 [ 0.135459] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136372] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.360265] cpuidle: using governor ladder [ 0.390288] cpuidle: using governor menu [ 0.400457] OMAP GPIO hardware version 0.1 [ 0.415221] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.439648] No ATAGs? [ 0.439668] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.439678] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.440065] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.440075] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.440647] OMAP DMA hardware revision 0.0 [ 0.520963] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.522294] edma 43300000.edma: memcpy is disabled [ 0.527126] edma 43300000.edma: TI EDMA DMA engine driver [ 0.530941] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.531134] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.531289] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.531445] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.534363] palmas 0-0058: Irq flag is 0x00000004 [ 0.562372] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.565582] SMPS3: supplied by VMAIN [ 0.568908] SMPS6: supplied by VMAIN [ 0.570673] SMPS7: supplied by VMAIN [ 0.572590] SMPS8: supplied by VMAIN [ 0.573925] SMPS9: supplied by VMAIN [ 0.574869] V3_3D: supplied by smps9 [ 0.575101] vtt_fixed: supplied by V3_3D [ 0.575207] LDO1: supplied by VMAIN [ 0.581275] random: fast init done [ 0.581413] LDO2: supplied by VMAIN [ 0.591269] LDO3: supplied by VMAIN [ 0.601297] LDO4: supplied by VMAIN [ 0.613401] LDO9: supplied by VMAIN [ 0.621700] LDOLN: supplied by VMAIN [ 0.631395] LDOUSB: supplied by VMAIN [ 0.644711] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.644913] media: Linux media interface: v0.10 [ 0.644962] Linux video capture interface: v2.00 [ 0.644997] pps_core: LinuxPPS API ver. 1 registered [ 0.645005] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645025] PTP clock support registered [ 0.645063] EDAC MC: Ver: 3.0.0 [ 0.651288] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.651582] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.651872] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.652057] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.652407] Advanced Linux Sound Architecture Driver Initialized. [ 0.660904] clocksource: Switched to clocksource arch_sys_counter [ 0.670665] NET: Registered protocol family 2 [ 0.671220] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.671282] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.671407] TCP: Hash tables configured (established 8192 bind 8192) [ 0.671459] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.671489] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.671676] NET: Registered protocol family 1 [ 0.692035] RPC: Registered named UNIX socket transport module. [ 0.692044] RPC: Registered udp transport module. [ 0.692052] RPC: Registered tcp transport module. [ 0.692058] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693020] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.705717] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.713231] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.723972] NFS: Registering the id_resolver key type [ 0.723993] Key type id_resolver registered [ 0.724000] Key type id_legacy registered [ 0.724040] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725454] bounce: pool size: 64 pages [ 0.725607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725618] io scheduler noop registered [ 0.725626] io scheduler deadline registered [ 0.725761] io scheduler cfq registered (default) [ 0.731190] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.731264] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.731336] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.731348] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.744517] dra7-pcie 51000000.pcie: Linked as a consumer to phy-4a094000.pciephy.3 [ 0.744844] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.744856] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.744890] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.744911] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.740964] dra7-pcie 51000000.pcie: phy link never came up [ 1.741136] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.741149] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.741160] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.741171] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.741546] PCI: bus0: Fast back to back transfers disabled [ 1.741658] PCI: bus1: Fast back to back transfers enabled [ 1.741784] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.741800] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.741813] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.742042] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.743098] backlight supply power not found, using dummy regulator [ 1.799396] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802822] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.790319] console [ttyS2] enabled [ 2.795723] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.802503] [drm] Initialized [ 2.807237] OMAP DSS rev 6.1 [ 2.810580] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.819085] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.829436] display supply vcc not found, using dummy regulator [ 3.006542] brd: module loaded [ 3.094981] loop: module loaded [ 3.102353] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 3.107398] 7 ofpart partitions found on MTD device spi0.0 [ 3.112950] Creating 7 MTD partitions on "spi0.0": [ 3.117764] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 3.133966] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 3.150337] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 3.167335] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 3.184075] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 3.201490] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 3.217820] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 3.235278] libphy: Fixed MDIO Bus: probed [ 3.300937] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.307063] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 3.328115] libphy: 48485000.mdio: probed [ 3.332201] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 3.341938] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.352414] cpsw 48484000.ethernet: Detected MACID = 5c:f8:21:5f:0c:c2 [ 3.359060] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.367441] cpsw 48484000.ethernet: cpsw: Detected MACID = 5c:f8:21:5f:0c:c3 [ 3.375892] mousedev: PS/2 mouse device common for all mice [ 3.381821] i2c /dev entries driver [ 3.392539] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.461318] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.467698] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.541981] ledtrig-cpu: registered to indicate activity on CPUs [ 3.561965] NET: Registered protocol family 10 [ 3.577085] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.591298] NET: Registered protocol family 17 [ 3.595904] Key type dns_resolver registered [ 3.600276] omap_voltage_late_init: Voltage driver support not added [ 3.620983] Power Management for TI OMAP4+ devices. [ 3.626074] Registering SWP/SWPB emulation handler [ 3.652991] dmm 4e000000.dmm: initialized all PAT entries [ 3.682004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.688646] [drm] No driver support for vblank timestamp query. [ 3.705770] [drm] Enabling DMM ywrap scrolling [ 3.728732] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.730313] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.740687] mmcblk0: mmc0:59b4 SS08G 7.41 GiB [ 3.741779] mmcblk0: p1 p2 [ 3.760645] mmc1: new DDR MMC card at address 0001 [ 3.771018] mmcblk1: mmc1:0001 R1J56L 13.8 GiB [ 3.790925] mmcblk1boot0: mmc1:0001 R1J56L partition 1 4.00 MiB [ 3.792220] Console: switching to colour frame buffer device 240x75 [ 3.814401] mmcblk1boot1: mmc1:0001 R1J56L partition 2 4.00 MiB [ 3.857017] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.893023] hctosys: unable to open rtc device (rtc0) [ 3.898729] ALSA device list: [ 3.901747] No soundcards found. [ 5.816437] EXT4-fs (mmcblk0p2): recovery complete [ 5.860319] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.868507] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.877054] devtmpfs: mounted [ 5.881483] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 6.023780] systemd[1]: System time before build time, advancing clock. [ 6.067186] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.085798] systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! [ 6.125601] systemd[1]: Set hostname to . [ 6.398245] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 6.406139] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 6.413906] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 6.421177] systemd[1]: sysinit.target: Found dependency on sockets.target/start [ 6.428616] systemd[1]: sysinit.target: Found dependency on rpcbind.socket/start [ 6.436084] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 6.444591] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ SKIP ] Ordering cycle found, skipping alignment.service [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Created slice User and Session Slice. [ OK ] Listening on udev Control Socket. [ OK ] Reached target Swap. [ OK ] Listening on Syslog Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Journal Socket. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Paths. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. Mounting Temporary Directory... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Journal Service... Starting Load Kernel Modules... [ 7.049723] cmemk: loading out-of-tree module taints kernel. Mounting POSIX Message Queue File System... [ 7.072247] CMEMK module: reference Linux version 4.9.41 [ 7.091611] cmemk initialized Starting Create Static Device Nodes in /dev... [ 7.122166] cryptodev: driver 1.8 loaded. [ OK ] Reached target Slices. Starting Setup Virtual Console... Starting Remount Root and Kernel File Systems... [ 7.215140] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Created slice system-getty.slice. Mounting Debug File System... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting Apply Kernel Variables... Mounting Configuration File System... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 7.963060] systemd-journald[108]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 8.497219] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 8.586075] remoteproc remoteproc0: 58820000.ipu is available [ 8.625711] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Started udev Coldplug all Devices. [ 8.717318] remoteproc remoteproc1: 55020000.ipu is available [ 8.799496] remoteproc remoteproc0: powering up 58820000.ipu [ 8.799506] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 8.799618] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 8.869862] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.869889] remoteproc remoteproc0: registered virtio0 (type 7) [ 8.869894] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 8.877447] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 8.877563] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 8.877660] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 8.877745] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 9.026499] ov2659 0-0030: Sensor detection failed (3030, 0) [ 9.080485] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 9.083063] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22) [ 9.360376] input: EP0790M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ OK ] Reached target System Initialization. [ 9.664686] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started Daily Cleanup of Temporary Directorie[ 9.711160] omap-des 480a5000.des: will run requests pump with realtime priority s. [ OK ] Reached target Timers. [ 9.762270] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc1 [ 9.798932] remoteproc remoteproc1: powering up 55020000.ipu [ 9.798941] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 [ 9.799016] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 9.847903] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. [ 9.956232] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activati[ 9.984186] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 on Socket. [ OK ] Listening on RPCbind Server Activation Socket[ 10.049026] remoteproc remoteproc2: 40800000.dsp is available . [ 10.101391] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.101414] remoteproc remoteproc1: registered virtio1 (type 7) [ 10.101418] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 10.111420] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.111537] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 10.131623] vpe 489d0000.vpe: Device registered as /dev/video0 [ 10.177197] SCSI subsystem initialized [ 10.305726] CAN device driver interface [ OK ] Reached target Sockets. [ 10.363887] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 10.374374] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 10.390969] vip 48970000.vip: VPDMA firmware loaded [[ 10.429056] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode OK ] Reached target Basic System. [ 10.473432] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst Starting TI MultiCore Tools Daemon... [ OK ] Started System Logging Service. [ 10.555164] scsi host0: ahci [ 10.558317] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 344 [ OK ] Started D-Bus System Message Bus. [ 10.616644] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 10.686773] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 10.795540] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=352) [ 10.852422] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 10.889761] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 10.945665] ata1: SATA link down (SStatus 0 SControl 300) [ 10.962191] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 10.968211] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 11.011181] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 11.102538] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 11.128295] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 11.132236] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 11.200998] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 11.201001] libphy: 4b2b2400.mdio: probed [ 11.234701] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 11.234706] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 11.244777] remoteproc remoteproc3: 4b234000.pru0 is available [ 11.244822] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 11.245030] remoteproc remoteproc4: 4b238000.pru1 is available [ 11.245058] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 11.245243] remoteproc remoteproc5: 4b2b4000.pru0 is available [ 11.245275] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 11.245446] remoteproc remoteproc6: 4b2b8000.pru1 is available [ 11.245474] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 11.299092] remoteproc remoteproc2: powering up 40800000.dsp [ 11.299102] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 22220992 [ 11.305758] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 11.305792] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 11.305899] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 11.426362] net eth1: initializing cpsw version 1.15 (0) [ 11.426369] net eth0: initialized cpsw ale version 1.4 [ 11.426372] net eth0: ALE Table size 1024 [ 11.481783] virtio_rpmsg_bus virtio2: rpmsg host is online [ 11.481813] remoteproc remoteproc2: registered virtio2 (type 7) [ 11.481818] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 11.486368] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 11.741033] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=-1) ▒▒▒ U-Boot SPL 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42) DRA722-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42 -0400) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3B DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 3 ms (186.5 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3739976 bytes read in 252 ms (14.2 MiB/s) 102295 bytes read in 70 ms (1.4 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8fffff96 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.41-ge3a80a1c5c (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Tue Sep 26 19:14:57 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM571x IDK-LCD-OSD-Display [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef646000 s22156 r8192 d22900 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=879e002c-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644576K/848896K available (8192K kernel code, 315K rwdata, 2500K rodata, 2048K init, 304K bss, 24096K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104ed60 ( 316 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109c0f0 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000322] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000331] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000744] Console: colour dummy device 80x30 [ 0.000761] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000768] This ensures that you still see kernel messages. Please [ 0.000774] update your kernel commandline. [ 0.000790] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000803] pid_max: default: 32768 minimum: 301 [ 0.000906] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001523] CPU: Testing write buffer coherency: ok [ 0.001733] /cpus/cpu@0 missing clock-frequency property [ 0.001747] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001762] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080036] EFI services will not be available. [ 0.099923] Brought up 1 CPUs [ 0.099933] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099940] CPU: All CPU(s) started in HYP mode. [ 0.099946] CPU: Virtualization extensions available. [ 0.100330] devtmpfs: initialized [ 0.130074] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130328] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130344] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133724] pinctrl core: initialized pinctrl subsystem [ 0.134576] NET: Registered protocol family 16 [ 0.135441] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136371] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.360261] cpuidle: using governor ladder [ 0.390285] cpuidle: using governor menu [ 0.400447] OMAP GPIO hardware version 0.1 [ 0.415169] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.439598] No ATAGs? [ 0.439618] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.439627] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.440013] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.440024] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.440597] OMAP DMA hardware revision 0.0 [ 0.520983] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.522313] edma 43300000.edma: memcpy is disabled [ 0.527148] edma 43300000.edma: TI EDMA DMA engine driver [ 0.530951] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.531144] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.531299] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.531455] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.534354] palmas 0-0058: Irq flag is 0x00000004 [ 0.562358] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.565566] SMPS3: supplied by VMAIN [ 0.568888] SMPS6: supplied by VMAIN [ 0.570652] SMPS7: supplied by VMAIN [ 0.572559] SMPS8: supplied by VMAIN [ 0.573902] SMPS9: supplied by VMAIN [ 0.574854] V3_3D: supplied by smps9 [ 0.575090] vtt_fixed: supplied by V3_3D [ 0.575195] LDO1: supplied by VMAIN [ 0.581240] random: fast init done [ 0.581411] LDO2: supplied by VMAIN [ 0.591264] LDO3: supplied by VMAIN [ 0.601292] LDO4: supplied by VMAIN [ 0.613389] LDO9: supplied by VMAIN [ 0.621679] LDOLN: supplied by VMAIN [ 0.631383] LDOUSB: supplied by VMAIN [ 0.644695] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.644899] media: Linux media interface: v0.10 [ 0.644947] Linux video capture interface: v2.00 [ 0.644982] pps_core: LinuxPPS API ver. 1 registered [ 0.644990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645010] PTP clock support registered [ 0.645048] EDAC MC: Ver: 3.0.0 [ 0.651275] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.651566] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.651855] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.652040] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.652390] Advanced Linux Sound Architecture Driver Initialized. [ 0.660895] clocksource: Switched to clocksource arch_sys_counter [ 0.670655] NET: Registered protocol family 2 [ 0.671205] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.671267] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.671392] TCP: Hash tables configured (established 8192 bind 8192) [ 0.671441] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.671473] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.671659] NET: Registered protocol family 1 [ 0.692019] RPC: Registered named UNIX socket transport module. [ 0.692028] RPC: Registered udp transport module. [ 0.692036] RPC: Registered tcp transport module. [ 0.692043] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693005] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.705706] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.713226] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.723970] NFS: Registering the id_resolver key type [ 0.723995] Key type id_resolver registered [ 0.724003] Key type id_legacy registered [ 0.724041] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725452] bounce: pool size: 64 pages [ 0.725606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725616] io scheduler noop registered [ 0.725624] io scheduler deadline registered [ 0.725758] io scheduler cfq registered (default) [ 0.731159] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.731232] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.731305] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.731317] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.744477] dra7-pcie 51000000.pcie: Linked as a consumer to phy-4a094000.pciephy.3 [ 0.744803] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.744815] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.744847] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.744869] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.740954] dra7-pcie 51000000.pcie: phy link never came up [ 1.741128] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.741141] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.741152] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.741163] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.741541] PCI: bus0: Fast back to back transfers disabled [ 1.741655] PCI: bus1: Fast back to back transfers enabled [ 1.741777] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.741793] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.741807] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.742039] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.743091] backlight supply power not found, using dummy regulator [ 1.799138] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802558] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.790061] console [ttyS2] enabled [ 2.795459] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.802235] [drm] Initialized [ 2.806968] OMAP DSS rev 6.1 [ 2.810310] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.818820] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.829171] display supply vcc not found, using dummy regulator [ 3.006278] brd: module loaded [ 3.094740] loop: module loaded [ 3.102138] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 3.107185] 7 ofpart partitions found on MTD device spi0.0 [ 3.112737] Creating 7 MTD partitions on "spi0.0": [ 3.117550] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 3.133752] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 3.150118] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 3.167117] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 3.183856] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 3.201265] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 3.217597] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 3.235044] libphy: Fixed MDIO Bus: probed [ 3.300928] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.307053] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 3.327950] libphy: 48485000.mdio: probed [ 3.332033] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 3.341770] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.352243] cpsw 48484000.ethernet: Detected MACID = 5c:f8:21:5f:0c:c2 [ 3.358889] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.367280] cpsw 48484000.ethernet: cpsw: Detected MACID = 5c:f8:21:5f:0c:c3 [ 3.375721] mousedev: PS/2 mouse device common for all mice [ 3.381648] i2c /dev entries driver [ 3.392429] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.461311] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.467691] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.541981] ledtrig-cpu: registered to indicate activity on CPUs [ 3.561965] NET: Registered protocol family 10 [ 3.577083] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.591291] NET: Registered protocol family 17 [ 3.595897] Key type dns_resolver registered [ 3.600266] omap_voltage_late_init: Voltage driver support not added [ 3.620973] Power Management for TI OMAP4+ devices. [ 3.626061] Registering SWP/SWPB emulation handler [ 3.656997] dmm 4e000000.dmm: initialized all PAT entries [ 3.692005] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.698647] [drm] No driver support for vblank timestamp query. [ 3.715746] [drm] Enabling DMM ywrap scrolling [ 3.738717] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.740297] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.750670] mmcblk0: mmc0:59b4 SS08G 7.41 GiB [ 3.751766] mmcblk0: p1 p2 [ 3.766481] mmc1: new DDR MMC card at address 0001 [ 3.776829] mmcblk1: mmc1:0001 R1J56L 13.8 GiB [ 3.787007] mmcblk1boot0: mmc1:0001 R1J56L partition 1 4.00 MiB [ 3.800915] mmcblk1boot1: mmc1:0001 R1J56L partition 2 4.00 MiB [ 3.803404] Console: switching to colour frame buffer device 240x75 [ 3.867299] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.902081] hctosys: unable to open rtc device (rtc0) [ 3.907798] ALSA device list: [ 3.910777] No soundcards found. [ 5.786332] EXT4-fs (mmcblk0p2): recovery complete [ 5.828881] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.837061] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.845627] devtmpfs: mounted [ 5.850021] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 5.997314] systemd[1]: System time before build time, advancing clock. [ 6.040990] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.059578] systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! [ 6.095394] systemd[1]: Set hostname to . [ 6.378551] systemd[1]: basic.target: Found ordering cycle on basic.target/start [ 6.386101] systemd[1]: basic.target: Found dependency on sysinit.target/start [ 6.393433] systemd[1]: basic.target: Found dependency on alignment.service/start [ 6.400971] systemd[1]: basic.target: Found dependency on basic.target/start [ 6.408063] systemd[1]: basic.target: Breaking ordering cycle by deleting job alignment.service/start [ 6.417340] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with basic.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 6.464492] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Journal Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Created slice System Slice. Mounting POSIX Message Queue File System... [ OK ] Reached target Slices. Starting Remount Root and Kernel File Systems... [ 6.724786] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Listening on udev Control Socket. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. Starting Setup Virtual Console... [ OK ] Created slice system-getty.slice. [ OK ] Reached target Swap. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. Mounting Temporary Directory... Starting Load Kernel Modules... [ 6.988583] cmemk: loading out-of-tree module taints kernel. [ 6.995106] CMEMK module: reference Linux version 4.9.41 [ 7.003804] cmemk initialized Mounting Debug File System... [ 7.027699] cryptodev: driver 1.8 loaded. Starting Create Static Device Nodes in /dev... [ OK ] Listening on Process Core Dump Socket. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Reached target Remote File Systems. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Setup Virtual Console. [ OK ] Started Load Kernel Modules. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Mounting Configuration File System... Starting Apply Kernel Variables... Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 7.967965] systemd-journald[125]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 8.490877] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 8.508888] remoteproc remoteproc0: 58820000.ipu is available [ 8.617234] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Started udev Coldplug all Devices. [ 8.709087] remoteproc remoteproc1: 55020000.ipu is available [ 8.793100] remoteproc remoteproc0: powering up 58820000.ipu [ 8.793109] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 8.793219] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 8.859082] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.859105] remoteproc remoteproc0: registered virtio0 (type 7) [ 8.859110] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 8.871207] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 8.871328] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 8.871414] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 8.871496] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 9.037380] ov2659 0-0030: Sensor detection failed (3030, 0) [ 9.087123] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 9.095280] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22) [ 9.375039] input: EP0790M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ OK ] Reached target System Initialization. [ 9.638540] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Listening on dropbear.socket. [ 9.709153] omap-des 480a5000.des: will run requests pump with realtime priority [ OK ] Started Daily Cleanup of Temporary Directorie[ 9.751978] remoteproc remoteproc1: powering up 55020000.ipu s. [ 9.770758] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc1 [ 9.787165] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 9.787776] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 9.787856] remoteproc remoteproc2: 40800000.dsp is available [ 9.836026] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 9.877972] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 10.039230] SCSI subsystem initialized [ 10.109416] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 10.109436] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 10.109442] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 10.144077] CAN device driver interface [[ 10.257943] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 OK ] Reached target Timers. [[ 10.299239] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ 10.351252] vpe 489d0000.vpe: Device registered as /dev/video0 [ 10.361319] vip 48970000.vip: VPDMA firmware loaded [ OK ] Reached target Basic System. [ 10.398602] scsi host0: ahci [ 10.402486] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 344 Starting Login Service... Starting uim-sysfs.service... [ 10.462113] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec Starting Avahi mDNS/DNS-SD Stack... [ 10.510401] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=352) [ 10.596742] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 Starting Print notice about GPLv3 packages... [ OK ] Started System Logging Service. Starting TI MultiCore Tools Daemon... [ OK ] Started D-Bus System Message Bus. [ 10.750819] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 10.792895] ata1: SATA link down (SStatus 0 SControl 300) [ 10.887515] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 10.930004] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.930022] remoteproc remoteproc1: registered virtio1 (type 7) [ 10.930027] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 10.979268] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.979395] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 11.051944] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 11.279493] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 11.308719] remoteproc remoteproc2: powering up 40800000.dsp [ 11.318077] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 11.324290] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 11.326713] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 11.349566] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 11.390310] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 11.390313] libphy: 4b2b2400.mdio: probed [ 11.413518] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 11.413523] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 11.421292] remoteproc remoteproc3: 4b234000.pru0 is available [ 11.421333] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 11.421506] remoteproc remoteproc4: 4b238000.pru1 is available [ 11.421538] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 11.421703] remoteproc remoteproc5: 4b2b4000.pru0 is available [ 11.421731] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 11.421893] remoteproc remoteproc6: 4b2b8000.pru1 is available [ 11.421927] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 11.642848] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting Telephony service... [ 12.808285] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 22220992 Starting Network Service... [ OK ] Started Kernel Logging Service. [ 12.920610] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 12.926504] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 12.932453] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ OK ] Started TI MultiCore Tools Daemon. [ OK ] Found device /dev/ttyS2. [ OK ] Started Network Service. [ 13.135592] Bluetooth: Core ver 2.22 [ 13.149199] net eth1: initializing cpsw version 1.15 (0) [ 13.179454] NET: Registered protocol family 31 [ 13.179458] Bluetooth: HCI device and connection manager initialized [ 13.179470] Bluetooth: HCI socket layer initialized [ 13.179478] Bluetooth: L2CAP socket layer initialized [ 13.179499] Bluetooth: SCO socket layer initialized [ 13.388501] virtio_rpmsg_bus virtio2: rpmsg host is online [ 13.388526] remoteproc remoteproc2: registered virtio2 (type 7) [ 13.388530] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 13.413440] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 13.847637] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service rpc_example_2 with src 1024 dst 101 ▒▒▒ U-Boot SPL 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42) DRA722-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42 -0400) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3B DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 4 ms (139.6 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3739976 bytes read in 252 ms (14.2 MiB/s) 102295 bytes read in 69 ms (1.4 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe4000, end 8fffff96 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.41-ge3a80a1c5c (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Tue Sep 26 19:14:57 EDT 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM571x IDK-LCD-OSD-Display [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef646000 s22156 r8192 d22900 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=879e002c-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644576K/848896K available (8192K kernel code, 315K rwdata, 2500K rodata, 2048K init, 304K bss, 24096K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104ed60 ( 316 kB) [ 0.000000] .bss : 0xc1050000 - 0xc109c0f0 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000016] Switching to timer-based delay loop, resolution 162ns [ 0.000319] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000327] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000745] Console: colour dummy device 80x30 [ 0.000762] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000769] This ensures that you still see kernel messages. Please [ 0.000775] update your kernel commandline. [ 0.000790] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000804] pid_max: default: 32768 minimum: 301 [ 0.000906] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001524] CPU: Testing write buffer coherency: ok [ 0.001736] /cpus/cpu@0 missing clock-frequency property [ 0.001750] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001765] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080033] EFI services will not be available. [ 0.099920] Brought up 1 CPUs [ 0.099930] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099937] CPU: All CPU(s) started in HYP mode. [ 0.099944] CPU: Virtualization extensions available. [ 0.100325] devtmpfs: initialized [ 0.130073] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130324] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130340] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133735] pinctrl core: initialized pinctrl subsystem [ 0.134591] NET: Registered protocol family 16 [ 0.135457] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136388] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.360270] cpuidle: using governor ladder [ 0.390293] cpuidle: using governor menu [ 0.400431] OMAP GPIO hardware version 0.1 [ 0.415118] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.439505] No ATAGs? [ 0.439525] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.439534] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.439917] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.439927] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.440491] OMAP DMA hardware revision 0.0 [ 0.521007] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.522337] edma 43300000.edma: memcpy is disabled [ 0.527175] edma 43300000.edma: TI EDMA DMA engine driver [ 0.530977] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.531174] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.531331] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.531490] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.534384] palmas 0-0058: Irq flag is 0x00000004 [ 0.562374] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.565575] SMPS3: supplied by VMAIN [ 0.568894] SMPS6: supplied by VMAIN [ 0.570663] SMPS7: supplied by VMAIN [ 0.572575] SMPS8: supplied by VMAIN [ 0.573915] SMPS9: supplied by VMAIN [ 0.574863] V3_3D: supplied by smps9 [ 0.575094] vtt_fixed: supplied by V3_3D [ 0.575202] LDO1: supplied by VMAIN [ 0.581410] LDO2: supplied by VMAIN [ 0.581462] random: fast init done [ 0.591270] LDO3: supplied by VMAIN [ 0.601297] LDO4: supplied by VMAIN [ 0.613395] LDO9: supplied by VMAIN [ 0.621689] LDOLN: supplied by VMAIN [ 0.631395] LDOUSB: supplied by VMAIN [ 0.644724] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.644928] media: Linux media interface: v0.10 [ 0.644975] Linux video capture interface: v2.00 [ 0.645011] pps_core: LinuxPPS API ver. 1 registered [ 0.645019] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645038] PTP clock support registered [ 0.645076] EDAC MC: Ver: 3.0.0 [ 0.651292] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.651586] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.651875] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.652062] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.652414] Advanced Linux Sound Architecture Driver Initialized. [ 0.660907] clocksource: Switched to clocksource arch_sys_counter [ 0.670673] NET: Registered protocol family 2 [ 0.671227] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.671289] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.671415] TCP: Hash tables configured (established 8192 bind 8192) [ 0.671466] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.671498] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.671684] NET: Registered protocol family 1 [ 0.692044] RPC: Registered named UNIX socket transport module. [ 0.692053] RPC: Registered udp transport module. [ 0.692060] RPC: Registered tcp transport module. [ 0.692066] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.693026] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.705741] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.713261] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.723999] NFS: Registering the id_resolver key type [ 0.724022] Key type id_resolver registered [ 0.724029] Key type id_legacy registered [ 0.724068] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725483] bounce: pool size: 64 pages [ 0.725639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725649] io scheduler noop registered [ 0.725657] io scheduler deadline registered [ 0.725791] io scheduler cfq registered (default) [ 0.731216] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.731288] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.731362] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.731373] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.744527] dra7-pcie 51000000.pcie: Linked as a consumer to phy-4a094000.pciephy.3 [ 0.744855] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.744867] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.744899] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.744920] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 1.740966] dra7-pcie 51000000.pcie: phy link never came up [ 1.741140] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 1.741153] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.741164] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.741176] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 1.741552] PCI: bus0: Fast back to back transfers disabled [ 1.741665] PCI: bus1: Fast back to back transfers enabled [ 1.741791] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 1.741807] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 1.741820] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.742050] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 1.743105] backlight supply power not found, using dummy regulator [ 1.799563] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 1.802959] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.790454] console [ttyS2] enabled [ 2.795855] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.802634] [drm] Initialized [ 2.807370] OMAP DSS rev 6.1 [ 2.810713] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.819225] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.829582] display supply vcc not found, using dummy regulator [ 3.006704] brd: module loaded [ 3.095176] loop: module loaded [ 3.102565] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 3.107611] 7 ofpart partitions found on MTD device spi0.0 [ 3.113165] Creating 7 MTD partitions on "spi0.0": [ 3.117979] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 3.134180] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 3.150547] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 3.167553] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 3.184290] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 3.201699] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 3.218029] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 3.235488] libphy: Fixed MDIO Bus: probed [ 3.300940] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 3.307065] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 3.328036] libphy: 48485000.mdio: probed [ 3.332124] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 3.341860] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.352329] cpsw 48484000.ethernet: Detected MACID = 5c:f8:21:5f:0c:c2 [ 3.358977] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.367364] cpsw 48484000.ethernet: cpsw: Detected MACID = 5c:f8:21:5f:0c:c3 [ 3.375808] mousedev: PS/2 mouse device common for all mice [ 3.381729] i2c /dev entries driver [ 3.392463] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 3.461316] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 3.467696] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 3.541989] ledtrig-cpu: registered to indicate activity on CPUs [ 3.561982] NET: Registered protocol family 10 [ 3.577098] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.591303] NET: Registered protocol family 17 [ 3.595912] Key type dns_resolver registered [ 3.600285] omap_voltage_late_init: Voltage driver support not added [ 3.620985] Power Management for TI OMAP4+ devices. [ 3.626075] Registering SWP/SWPB emulation handler [ 3.657788] dmm 4e000000.dmm: initialized all PAT entries [ 3.692012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.698654] [drm] No driver support for vblank timestamp query. [ 3.715771] [drm] Enabling DMM ywrap scrolling [ 3.738733] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.740314] mmc0: new ultra high speed DDR50 SDHC card at address 59b4 [ 3.750683] mmcblk0: mmc0:59b4 SS08G 7.41 GiB [ 3.751777] mmcblk0: p1 p2 [ 3.766709] mmc1: new DDR MMC card at address 0001 [ 3.777055] mmcblk1: mmc1:0001 R1J56L 13.8 GiB [ 3.787230] mmcblk1boot0: mmc1:0001 R1J56L partition 1 4.00 MiB [ 3.800927] mmcblk1boot1: mmc1:0001 R1J56L partition 2 4.00 MiB [ 3.803460] Console: switching to colour frame buffer device 240x75 [ 3.867161] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.902098] hctosys: unable to open rtc device (rtc0) [ 3.907806] ALSA device list: [ 3.910785] No soundcards found. [ 5.807892] EXT4-fs (mmcblk0p2): recovery complete [ 5.852921] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.861109] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.869612] devtmpfs: mounted [ 5.874045] Freeing unused kernel memory: 2048K (c0e00000 - c1000000) [ 6.020118] systemd[1]: System time before build time, advancing clock. [ 6.063459] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 6.082141] systemd[1]: Detected architecture arm. Welcome to Arago 2017.06! [ 6.115529] systemd[1]: Set hostname to . [ 6.394584] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start [ 6.402465] systemd[1]: sysinit.target: Found dependency on alignment.service/start [ 6.410178] systemd[1]: sysinit.target: Found dependency on basic.target/start [ 6.417486] systemd[1]: sysinit.target: Found dependency on sysinit.target/start [ 6.424942] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start [ 6.434394] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start [ SKIP ] Ordering cycle found, skipping alignment.service [ 6.483406] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Listening on Journal Socket. [ OK ] Reached target Remote File Systems. [ OK ] Reached target Swap. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Syslog Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. Starting Load Kernel Modules... [ 6.898259] cmemk: loading out-of-tree module taints kernel. [ 6.904746] CMEMK module: reference Linux version 4.9.41 [ 6.910725] cmemk initialized Mounting Debug File System... [ 6.931521] cryptodev: driver 1.8 loaded. [ OK ] Created slice system-getty.slice. Mounting Temporary Directory... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting POSIX Message Queue File System... Starting Remount Root and Kernel File Systems... [ 7.085142] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Reached target Slices. Starting Journal Service... Starting Setup Virtual Console... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Paths. Starting Create Static Device Nodes in /dev... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Setup Virtual Console. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... Starting udev Coldplug all Devices... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting Apply Kernel Variables... Mounting Configuration File System... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 7.973217] systemd-journald[121]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 8.515903] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 8.611048] remoteproc remoteproc0: 58820000.ipu is available [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. [ 8.658031] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activati[ 8.702762] remoteproc remoteproc1: 55020000.ipu is available on Socket. [ 8.768181] remoteproc remoteproc0: powering up 58820000.ipu [ 8.768191] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4872056 [ 8.768302] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 8.779490] virtio_rpmsg_bus virtio0: rpmsg host is online [ 8.779512] remoteproc remoteproc0: registered virtio0 (type 7) [ 8.779516] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 8.835851] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 8.835984] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 8.836073] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 8.836157] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 9.082076] ov2659 0-0030: Sensor detection failed (3030, 0) [ 9.135993] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 9.229890] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22) [ 9.412171] input: EP0790M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ OK ] Listening on D-Bus System Message Bus Socket.[ 9.627451] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ OK ] Started Daily Cleanup of Temporary Directorie[ 9.711083] omap-des 480a5000.des: will run requests pump with realtime priority s. [ 9.751544] remoteproc remoteproc1: powering up 55020000.ipu [ 9.751553] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3743164 [ 9.751626] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ OK ] Reached target Timers. [ 9.888013] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc1 [ OK ] Listening on dropbear.socket. [ 9.933749] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 9.952609] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 9.952684] remoteproc remoteproc2: 40800000.dsp is available [ 9.954610] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 9.997092] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 10.039542] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.039561] remoteproc remoteproc1: registered virtio1 (type 7) [ 10.039565] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 10.100425] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 10.100544] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ 10.111089] vip 48970000.vip: VPDMA firmware loaded [ 10.111393] vpe 489d0000.vpe: Device registered as /dev/video0 [ 10.202022] SCSI subsystem initialized [ 10.267981] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 10.292794] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled [ 10.292814] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 10.292820] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 10.308546] CAN device driver interface [ 10.321161] scsi host0: ahci [ 10.321405] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 344 [ 10.321923] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 10.323943] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 10.334543] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 10.354477] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 10.355448] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 10.410414] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=352) [ 10.651048] ata1: SATA link down (SStatus 0 SControl 300) [ 10.687248] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ 10.769071] remoteproc remoteproc2: powering up 40800000.dsp [ 10.769080] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 22220992 [ 10.775727] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 10.775761] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 10.775849] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 10.821017] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok [ 10.856227] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 10.858616] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 10.905554] virtio_rpmsg_bus virtio2: rpmsg host is online [ 10.905570] remoteproc remoteproc2: registered virtio2 (type 7) [ 10.905573] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 10.910111] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 10.966508] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 10.966512] libphy: 4b2b2400.mdio: probed [ 11.003214] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 11.003219] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 11.044767] remoteproc remoteproc3: 4b234000.pru0 is available [ 11.044807] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 11.045021] remoteproc remoteproc4: 4b238000.pru1 is available [ 11.045056] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully ▒▒▒ U-Boot SPL 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42) DRA722-GP ES2.0 Trying to boot from MMC1 reading uboot.env ** Unable to read "uboot.env" from mmc0:1 ** Using default environment reading u-boot.img reading u-boot.img reading u-boot.img reading u-boot.img U-Boot 2017.01-g590c7d7fe1 (Sep 26 2017 - 20:05:42 -0400)