U-Boot SPL 2019.01-ga141f7abfd (Jan 05 2020 - 10:23:38 +0000) DRA752-GP ES2.0 no pinctrl state for default mode Trying to boot from MMC1 no pinctrl state for default mode Loading Environment from FAT... OK U-Boot 2019.01-ga141f7abfd (Jan 05 2020 - 10:23:38 +0000) CPU : DRA752-GP ES2.0 Model: TI AM5728 IDK Board: AM572x IDK REV 1.3C DRAM: 2 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... OK am57x_idk_lcd_detect: Failed to get I2C device 0/56 (ret 1) Net: eth0: ethernet@48484000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device 1490 bytes read in 2 ms (727.5 KiB/s) Importing environment from mmc0 ... ethernet@48484000 Waiting for PHY auto negotiation to complete.......... done link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.5.104 (258 ms) link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.5.64; our IP address is 192.168.5.104 Filename 'zImage-am57xx-evm.bin'. Load address: 0x82000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################### 4.1 MiB/s done Bytes transferred = 5169664 (4ee200 hex) link up on port 0, speed 1000, full duplex Using ethernet@48484000 device TFTP from server 192.168.5.64; our IP address is 192.168.5.104 Filename 'am572x-idk.dtb'. Load address: 0x88000000 Loading: ######################################### 3.6 MiB/s done Bytes transferred = 209063 (330a7 hex) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffc9000, end 8ffff0a6 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.100-g7a7a3af903 (oe-user@oe-host) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for t he A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Sun Jun 26 17:12:53 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5728 IDK [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node dsp2-memory@9f000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fe400000 [ 0.000000] OMAP4: Map 0x00000000afd00000 to (ptrval) for dram barrier [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000afcfffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x00000000afd00000-0x00000000ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000afcfffff] [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DRA752 ES2.0 [ 0.000000] percpu: Embedded 16 pages/cpu s33228 r8192 d24116 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521798 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.5.64:/home/stranzjm/Projekte/ti-am57x/PROCESSOR-SDK-LINUX-AM57X/ti-psdk-08_02_01_00/targetNFS,nolock,v3,tcp,rsize=4096,wsi ze=4096 rw ip=192.168.5.41::192.168.5.254:255.255.255.0::eth0:off [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000aa93f000-0x00000000ae93f000] (64MB) [ 0.000000] Memory: 1801980K/2094080K available (10240K kernel code, 710K rwdata, 3464K rodata, 2048K init, 297K bss, 103684K reserved, 188416K cma-reserved, 1286144K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4e0 with crng_init=0 [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000000] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65535999984741ns [ 0.001312] TI gptimer clockevent: always-on 32786 Hz at /ocp/interconnect@4ae00000/segment@10000/target-module@8000 [ 0.001861] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48000000/segment@0/target-module@32000 [ 0.002960] TI gptimer percpu-dmtimer: 20000000 Hz at /ocp/interconnect@48800000/segment@0/target-module@2a000 [ 0.003845] Console: colour dummy device 80x30 [ 0.003906] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664) [ 0.061950] pid_max: default: 32768 minimum: 301 [ 0.062072] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.062072] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.062683] CPU: Testing write buffer coherency: ok [ 0.062713] CPU0: Spectre v2: using ICIALLU workaround [ 0.062896] /cpus/cpu@0 missing clock-frequency property [ 0.062896] /cpus/cpu@1 missing clock-frequency property [ 0.062927] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.063415] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.063507] rcu: Hierarchical SRCU implementation. [ 0.063659] EFI services will not be available. [ 0.064208] smp: Bringing up secondary CPUs ... [ 0.124420] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.124450] CPU1: Spectre v2: using ICIALLU workaround [ 0.124572] smp: Brought up 1 node, 2 CPUs [ 0.124572] SMP: Total of 2 processors activated (3994.41 BogoMIPS). [ 0.124603] CPU: All CPU(s) started in HYP mode. [ 0.124603] CPU: Virtualization extensions available. [ 0.124969] devtmpfs: initialized [ 0.147796] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.147979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.147979] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.150909] pinctrl core: initialized pinctrl subsystem [ 0.151428] DMI not present or invalid. [ 0.151702] NET: Registered protocol family 16 [ 0.152801] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.155548] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.173614] thermal_sys: Registered thermal governor 'fair_share' [ 0.173614] thermal_sys: Registered thermal governor 'bang_bang' [ 0.173614] thermal_sys: Registered thermal governor 'step_wise' [ 0.173645] thermal_sys: Registered thermal governor 'user_space' [ 0.174377] cpuidle: using governor ladder [ 0.174407] cpuidle: using governor menu [ 2.574249] random: fast init done [ 3.149597] No ATAGs? [ 3.149688] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 3.149688] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 3.186645] reg-fixed-voltage fixedregulator-v3_3d: Failed to register regulator: -517 [ 3.186828] V1_2D: supplied by VMAIN [ 3.187316] reg-fixed-voltage fixedregulator-vtt: Failed to register regulator: -517 [ 3.188629] iommu: Default domain type: Translated [ 3.192047] SCSI subsystem initialized [ 3.192535] mc: Linux media interface: v0.10 [ 3.192565] videodev: Linux video capture interface: v2.00 [ 3.192626] pps_core: LinuxPPS API ver. 1 registered [ 3.192626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.192657] PTP clock support registered [ 3.192687] EDAC MC: Ver: 3.0.0 [ 3.193786] Advanced Linux Sound Architecture Driver Initialized. [ 3.194580] clocksource: Switched to clocksource 32k_counter [ 3.200744] NET: Registered protocol family 2 [ 3.200866] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 3.201629] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.201660] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 3.201721] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.201843] TCP: Hash tables configured (established 8192 bind 8192) [ 3.201934] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 3.201965] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 3.202056] NET: Registered protocol family 1 [ 3.202423] RPC: Registered named UNIX socket transport module. [ 3.202453] RPC: Registered udp transport module. [ 3.202453] RPC: Registered tcp transport module. [ 3.202453] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.202484] PCI: CLS 0 bytes, default 64 [ 3.203887] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 3.204040] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 3.204772] Initialise system trusted keyrings [ 3.204895] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 3.208740] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.209197] NFS: Registering the id_resolver key type [ 3.209228] Key type id_resolver registered [ 3.209259] Key type id_legacy registered [ 3.209320] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.209320] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.209350] ntfs: driver 2.1.32 [Flags: R/O]. [ 3.209686] Key type asymmetric registered [ 3.209716] Asymmetric key parser 'x509' registered [ 3.209747] bounce: pool size: 64 pages [ 3.209777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 3.209808] io scheduler mq-deadline registered [ 3.209808] io scheduler kyber registered [ 3.726226] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 4.040832] OMAP GPIO hardware version 0.1 [ 4.273803] palmas 0-0058: Irq flag is 0x00000004 [ 4.296508] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 4.311676] smps12: supplied by regulator-dummy [ 4.313232] smps3: supplied by VMAIN [ 4.314849] smps45: supplied by regulator-dummy [ 4.316528] smps6: supplied by VMAIN [ 4.318054] smps7: supplied by VMAIN [ 4.319885] smps8: supplied by VMAIN [ 4.320678] smps9: supplied by VMAIN [ 4.321624] ldo1: supplied by VMAIN [ 4.323333] ldo2: supplied by VMAIN [ 4.325073] ldo3: supplied by VMAIN [ 4.326782] ldo4: supplied by VMAIN [ 4.328613] LDO5: supplied by regulator-dummy [ 4.328979] LDO6: supplied by regulator-dummy [ 4.329315] LDO7: supplied by regulator-dummy [ 4.329650] LDO8: supplied by regulator-dummy [ 4.330047] ldo9: supplied by VMAIN [ 4.331909] ldoln: supplied by VMAIN [ 4.333648] ldousb: supplied by VMAIN [ 4.351104] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.375457] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 4.376831] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 4.386444] edma 43300000.dma: memcpy is disabled [ 4.389221] edma 43300000.dma: TI EDMA DMA engine driver [ 4.406005] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 4.411193] dra7-pcie 51000000.pcie: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 4.411254] dra7-pcie 51000000.pcie: IO 0x0020003000..0x0020012fff -> 0x0000000000 [ 4.411285] dra7-pcie 51000000.pcie: MEM 0x0020013000..0x002fffffff -> 0x0020013000 [ 5.412109] dra7-pcie 51000000.pcie: Phy link never came up [ 5.412231] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 5.412261] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.412261] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 5.412261] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 5.412322] pci 0000:00:00.0: [104c:8888] type 01 class 0x060400 [ 5.412322] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 5.412353] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 5.412414] pci 0000:00:00.0: supports D1 [ 5.412445] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 5.420379] PCI: bus0: Fast back to back transfers disabled [ 5.427978] PCI: bus1: Fast back to back transfers enabled [ 5.428009] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 5.428039] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 5.428039] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 5.428375] pcieport 0000:00:00.0: PME: Signaling with IRQ 175 [ 5.480346] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 5.484191] printk: console [ttyS2] disabled [ 5.484344] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 112, base_baud = 3000000) is a 8250 [ 6.591644] printk: console [ttyS2] enabled [ 6.598724] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 6.605072] random: crng init done [ 6.606567] DSS: OMAP DSS rev 6.1 [ 6.636840] brd: module loaded [ 6.645477] loop: module loaded [ 6.656890] spi-nor spi0.0: s25fl256s1 (32768 Kbytes) [ 6.662017] 7 fixed-partitions partitions found on MTD device spi0.0 [ 6.668426] Creating 7 MTD partitions on "spi0.0": [ 6.673248] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 6.695220] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 6.701599] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 6.715209] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 6.735168] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 6.742584] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 6.755218] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 6.824645] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 6.835968] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 6.845733] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 6.855926] cpsw-switch 48484000.switch: initialized cpsw ale version 1.4 [ 6.862762] cpsw-switch 48484000.switch: ALE Table size 1024 [ 6.868530] cpsw-switch 48484000.switch: cpts: overflow check period 500 (jiffies) [ 6.876159] cpsw-switch 48484000.switch: CPTS: ref_clk_freq:266000000 calc_mult:4036623398 calc_shift:30 error:-1 nsec/sec [ 6.887390] cpsw-switch 48484000.switch: Detected MACID = e4:15:f6:0e:4f:ae [ 6.894409] cpsw-switch 48484000.switch: Detected MACID = e4:15:f6:0e:4f:af [ 6.902862] cpsw-switch 48484000.switch: initialized (regs 0x0000000048484000, pool size 256) hw_ver:0019010F 1.15 (0) [ 6.914550] i2c /dev entries driver [ 6.927825] sdhci: Secure Digital Host Controller Interface driver [ 6.934051] sdhci: Copyright(c) Pierre Ossman [ 6.939575] sdhci-pltfm: SDHCI platform and OF driver helper [ 6.946807] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 6.955688] sdhci-omap 4809c000.mmc: Got CD GPIO [ 6.961029] sdhci-omap 480b4000.mmc: failed to set system capabilities [ 6.968292] ledtrig-cpu: registered to indicate activity on CPUs [ 6.978790] NET: Registered protocol family 10 [ 6.983856] Segment Routing with IPv6 [ 6.987579] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.993804] NET: Registered protocol family 17 [ 6.998504] Key type dns_resolver registered [ 7.002838] Registering SWP/SWPB emulation handler [ 7.008026] omap_voltage_late_init: Voltage driver support not added [ 7.014404] Power Management for TI OMAP4+ devices. [ 7.019653] Loading compiled-in X.509 certificates [ 7.044799] dmm 4e000000.dmm: workaround for errata i878 in use [ 7.052215] dmm 4e000000.dmm: initialized all PAT entries [ 7.058380] V3_3D: supplied by smps9 [ 7.062469] vtt_fixed: supplied by V3_3D [ 7.067626] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 7.075073] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 7.081329] platform 40800000.dsp: Adding to iommu group 0 [ 7.087829] omap-iommu 58882000.mmu: 58882000.mmu registered [ 7.093750] platform 58820000.ipu: Adding to iommu group 1 [ 7.100311] omap-iommu 55082000.mmu: 55082000.mmu registered [ 7.106262] platform 55020000.ipu: Adding to iommu group 2 [ 7.112762] omap-iommu 41501000.mmu: 41501000.mmu registered [ 7.119537] omap-iommu 41502000.mmu: 41502000.mmu registered [ 7.125610] platform 41000000.dsp: Adding to iommu group 3 [ 7.132232] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 7.140228] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 7.424285] [drm] Enabling DMM ywrap scrolling [ 7.480102] Console: switching to colour frame buffer device 240x67 [ 7.503295] omapdrm omapdrm.0: [drm] fb0: omapdrmdrmfb frame buffer device [ 7.511138] [drm] Initialized omapdrm 1.0.0 20110917 for omapdrm.0 on minor 0 [ 7.519226] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 7.528381] sdhci-omap 4809c000.mmc: Got CD GPIO [ 7.535003] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 7.559997] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 7.567657] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 7.575469] cpsw-switch 48484000.switch: starting ndev. mode: dual_mac [ 7.613769] mmc0: new high speed SDHC card at address 59b4 [ 7.619659] mmcblk0: mmc0:59b4 USDU1 14.9 GiB [ 7.625518] mmcblk0: p1 p2 [ 7.647247] mmc1: new DDR MMC card at address 0001 [ 7.652465] mmcblk1: mmc1:0001 S0J56X 14.8 GiB [ 7.657226] mmcblk1boot0: mmc1:0001 S0J56X partition 1 31.5 MiB [ 7.663360] mmcblk1boot1: mmc1:0001 S0J56X partition 2 31.5 MiB [ 7.669494] mmcblk1rpmb: mmc1:0001 S0J56X partition 3 4.00 MiB, chardev (243:0) [ 7.675811] Micrel KSZ9031 Gigabit PHY 48485000.mdio:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:00, irq=POLL) [ 11.866241] cpsw-switch 48484000.switch eth0: Link is Up - 1Gbps/Full - flow control off [ 11.894653] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.924682] IP-Config: Complete: [ 11.927917] device=eth0, hwaddr=e4:15:f6:0e:4f:ae, ipaddr=192.168.5.41, mask=255.255.255.0, gw=192.168.5.254 [ 11.938262] host=192.168.5.41, domain=, nis-domain=(none) [ 11.944122] bootserver=255.255.255.255, rootserver=192.168.5.64, rootpath= [ 11.944732] ALSA device list: [ 11.955078] No soundcards found. [ 11.963684] VFS: Mounted root (nfs filesystem) on device 0:16. [ 11.969848] devtmpfs: mounted [ 11.973907] Freeing unused kernel memory: 2048K [ 12.024841] Run /sbin/init as init process [ 12.186950] systemd[1]: System time before build time, advancing clock. [ 12.203033] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 12.224822] systemd[1]: Detected architecture arm. Welcome to Arago 2019.11! [ 12.295837] systemd[1]: Set hostname to . [ 12.468170] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 12.485412] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 12.809448] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 12.845886] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 12.885192] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 12.926025] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 12.965545] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Listening on Journal Socket. Starting Journal Service... Starting Remount Root and Kernel File Systems... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Mounting Kernel Debug File System... [ OK ] Created slice system-getty.slice. [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... Starting Load Kernel Modules... [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... Mounting POSIX Message Queue File System... [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Kernel Debug File System. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Mounted POSIX Message Queue File System. Starting Apply Kernel Variables... Mounting Kernel Configuration File System... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Create Static Device Nodes in /dev. [ 14.073455] systemd-journald[101]: Received request to flush runtime journal from PID 1 Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... [ OK ] Reached target Containers. Mounting /var/volatile... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Service... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Found device /dev/ttyS2. [ OK ] Started Network Service. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Reboot and dump vmcore via kexec... [ OK ] Listening on dropbear.socket. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Periodic Command Scheduler. Starting rc.pvr.service... Starting Print notice about GPLv3 packages... Starting Login Service... Starting TI MultiCore Tools Daemon... Starting TI IPC Daemon... [ OK ] Started Job spooling tools. [ OK ] Started D-Bus System Message Bus. Starting RPC Bind Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started Network Name Resolution. [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started TI IPC Daemon. [ OK ] Started rc.pvr.service. [FAILED] Failed to start TI MultiCore Tools Daemon. See 'systemctl status ti-mct-daemon.service' for details. [ OK ] Started RPC Bind Service. [ OK ] Started Wait for Network to be Configured. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils-dev binutils bison-dev bison cifs-utils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libasm1 libbfd libcairo-perf-utils libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmavconn libmpc3 libmpfr6 libreadline-dev libreadline7 libunistring2 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle parted pdm-anomaly-detection socketcan-interface swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Created slice system-systemd\x2dfsck.slice. Starting File System Check on /dev/mmcblk0p2... Starting File System Check on /dev/mmcblk0p1... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting weston.service... [ OK ] Reached target Network. Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Enable and configure wl18xx bluetooth stack... [ OK ] Started Redis In-Memory Data Store. [ OK ] Reached target Network is Online. [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Lightning Fast Webserver With Light System Requirements... Starting Permit User Sessions... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Login Service. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started File System Check on /dev/mmcblk0p2. Mounting /run/media/mmcblk0p2... [ OK ] Started File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Mounted /run/media/mmcblk0p1. [ 24.564941] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 24.602996] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /run/media/mmcblk0p2. [ OK ] Started weston.service. Starting Matrix GUI... Starting telnetd.service... [ OK ] Started Matrix GUI. [ OK ] Started telnetd.service. Starting thttpd.service... Starting LSB: network benchmark... [ OK ] Started thttpd.service. Starting LSB: Redis, a key-value store... [ OK ] Started LSB: network benchmark. [ OK ] Started LSB: Redis, a key-value store. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2019.11 am57xx-evm ttyS2 am57xx-evm login: