U-Boot SPL 2015.07-00017-g3c1b18c (Jun 21 2017 - 00:15:13)
DRA752-GP ES1.1
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img
ti_i2c_eeprom_init failed -1


U-Boot 2015.07-00017-g3c1b18c (Jun 21 2017 - 00:15:13 +0800), Build: jenkins-aph-uboot-315

CPU  : DRA752-GP ES1.1
Board: vp2730 REV <NULL>
I2C:   ready
DRAM:  2 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
reading uboot.env

** Unable to read "uboot.env" from mmc0:1 **
Using default environment

SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst 
SCSI:  SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst 
scanning bus for devices...
Found 0 device(s).
Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
574 bytes read in 9 ms (61.5 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
3402600 bytes read in 345 ms (9.4 MiB/s)
108844 bytes read in 141 ms (752.9 KiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x33eb68 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 8ffe2000, end 8ffff92b ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.32-g1d4e0f1 (jenkins@jks2-1404) (gcc version 4.9.3 20150413 (prerelease) (Linaro GCC 4.9-2015.05) ) #1 SMP PREEMPT Wed Jun 21 00:48:54 CST 2017
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: ATEN APH0402
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB
[    0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB
[    0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009f000000, size 8 MiB
[    0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 512 MiB at 0x00000000dfc00000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OMAP4: Map 0x00000000ffd00000 to fe600000 for dram barrier
[    0.000000] DRA752 ES1.1
[    0.000000] PERCPU: Embedded 11 pages/cpu @dfb2c000 s14848 r8192 d22016 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 473225
[    0.000000] Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 1181800K/1897472K available (6195K kernel code, 348K rwdata, 2304K rodata, 328K init, 288K bss, 27544K reserved, 688128K cma-reserved, 852992K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfc00000   ( 508 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc085505c   (8501 kB)
[    0.000000]       .init : 0xc0856000 - 0xc08a8000   ( 328 kB)
[    0.000000]       .data : 0xc08a8000 - 0xc08ff0a0   ( 349 kB)
[    0.000000]        .bss : 0xc0901000 - 0xc0949398   ( 289 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div
[    0.000000] OMAP clockevent source: timer1 at 32786 Hz
[    0.000000] Architected cp15 timer(s) running at 6.14MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[    0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
[    0.000016] Switching to timer-based delay loop, resolution 162ns
[    0.000332] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000339] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000802] Console: colour dummy device 80x30
[    0.000817] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2'
[    0.000823] This ensures that you still see kernel messages. Please
[    0.000829] update your kernel commandline.
[    0.000842] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
[    0.000855] pid_max: default: 32768 minimum: 301
[    0.000947] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000956] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001470] Initializing cgroup subsys io
[    0.001487] Initializing cgroup subsys memory
[    0.001511] Initializing cgroup subsys devices
[    0.001522] Initializing cgroup subsys freezer
[    0.001533] Initializing cgroup subsys perf_event
[    0.001543] Initializing cgroup subsys pids
[    0.001569] CPU: Testing write buffer coherency: ok
[    0.001766] /cpus/cpu@0 missing clock-frequency property
[    0.001781] /cpus/cpu@1 missing clock-frequency property
[    0.001791] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001828] Setting up static identity map for 0x800082c0 - 0x80008318
[    0.080164] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.080232] Brought up 2 CPUs
[    0.080245] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[    0.080252] CPU: All CPU(s) started in SVC mode.
[    0.080623] devtmpfs: initialized
[    0.110131] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.111080] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.316610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.328860] pinctrl core: initialized pinctrl subsystem
[    0.329721] NET: Registered protocol family 16
[    0.330716] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.360275] cpuidle: using governor ladder
[    0.390305] cpuidle: using governor menu
[    0.398475] OMAP GPIO hardware version 0.1
[    0.404917] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[    0.432100] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.432112] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.432598] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.432608] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.433182] OMAP DMA hardware revision 0.0
[    0.471758] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    0.477736] edma 43300000.edma: TI EDMA DMA engine driver
[    0.482427] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    0.482598] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    0.482751] omap-iommu 58882000.mmu: 58882000.mmu registered
[    0.482909] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.483190] omap-iommu 41501000.mmu: 41501000.mmu registered
[    0.483377] omap-iommu 41502000.mmu: 41502000.mmu registered
[    0.486657] palmas 0-0058: Irq flag is 0x00000008
[    0.502862] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0
[    0.585040] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.585106] omap_i2c 4807a000.i2c: could not find pctldev for node /ocp/l4@4a000000/scm@2000/pinmux@1400/i2c4_pins_default, deferring probe
[    0.585320] media: Linux media interface: v0.10
[    0.585378] Linux video capture interface: v2.00
[    0.585420] pps_core: LinuxPPS API ver. 1 registered
[    0.585427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.585453] PTP clock support registered
[    0.585507] EDAC MC: Ver: 3.0.0
[    0.586270] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400
[    0.586579] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400
[    0.586873] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    0.587164] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    0.587535] Advanced Linux Sound Architecture Driver Initialized.
[    0.588346] clocksource: Switched to clocksource arch_sys_counter
[    0.599468] NET: Registered protocol family 2
[    0.599967] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.600006] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.600072] TCP: Hash tables configured (established 4096 bind 4096)
[    0.600119] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.600139] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.600344] NET: Registered protocol family 1
[    0.600580] RPC: Registered named UNIX socket transport module.
[    0.600589] RPC: Registered udp transport module.
[    0.600596] RPC: Registered tcp transport module.
[    0.600602] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.601576] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.604030] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.611785] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.612427] NFS: Registering the id_resolver key type
[    0.612456] Key type id_resolver registered
[    0.612464] Key type id_legacy registered
[    0.612528] ntfs: driver 2.1.32 [Flags: R/O].
[    0.614499] bounce: pool size: 64 pages
[    0.614653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.614669] io scheduler noop registered
[    0.614683] io scheduler deadline registered
[    0.614716] io scheduler cfq registered (default)
[    0.619772] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
[    0.624317] backlight supply power not found, using dummy regulator
[    0.682534] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.685918] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 299, base_baud = 3000000) is a 8250
[    1.546624] console [ttyS2] enabled
[    1.551052] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq = 300, base_baud = 3000000) is a 8250
[    1.560697] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 301, base_baud = 3000000) is a 8250
[    1.570841] [drm] Initialized drm 1.1.0 20060810
[    1.577521] OMAP DSS rev 6.1
[    1.581340] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
[    1.589821] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops)
[    1.598953] *** tpd_probe enter
[    1.602457] *** tpd_probe success
[    1.606488] connector-hdmi hdmi_connector_1: failed to find video source
[    1.613321] connector-hdmi hdmi_connector_2: failed to find video source
[    1.632562] loop: module loaded
[    1.635990] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
[    1.643874] libphy: Fixed MDIO Bus: probed
[    1.698382] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
[    1.704505] davinci_mdio 48485000.mdio: detected phy mask fffffffc
[    1.715062] libphy: 48485000.mdio: probed
[    1.719133] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver unknown
[    1.727176] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver unknown
[    1.735876] cpsw 48484000.ethernet: Detected MACID = 74:da:ea:3d:60:36
[    1.742582] cpsw 48484000.ethernet: cpts: overflow check period 800
[    1.749581] cpsw 48484000.ethernet: cpsw: Detected MACID = 74:da:ea:3d:60:37
[    1.758118] mousedev: PS/2 mouse device common for all mice
[    1.764248] i2c /dev entries driver
[    1.770462] gpio-fan gpio_fan: GPIO fan initialized
[    1.775680] tmp102 0-0048: error reading config register
[    1.781070] tmp102: probe of 0-0048 failed with error -121
[    1.838966] vdd_3v3: supplied by regen1
[    1.899726] ledtrig-cpu: registered to indicate activity on CPUs
[    1.909760] davinci-mcasp 48460000.mcasp: ERRATA i868 workaround is enabled
[    1.917903] NET: Registered protocol family 10
[    1.933258] sit: IPv6 over IPv4 tunneling driver
[    1.938446] NET: Registered protocol family 17
[    1.943121] Key type dns_resolver registered
[    1.947521] omap_voltage_late_init: Voltage driver support not added
[    1.954425] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    1.960651] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    1.967360] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    1.973591] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    1.981792] Power Management for TI OMAP4+ devices.
[    1.986901] Registering SWP/SWPB emulation handler
[    1.993500] dmm 4e000000.dmm: initialized all PAT entries
[    2.034727] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz
[    2.041248] [dssclk] dpi_init_pll 625 channel 0 clk src 1
[    2.065713] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.073889] [dssclk] dpi_init_pll 625 channel 2 clk src 3
[    2.076473] mmc0: new high speed SDHC card at address dedb
[    2.094997] mmcblk0: mmc0:dedb SU04G 3.69 GiB 
[    2.100652]  mmcblk0: p1 p2
[    2.128680] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.135322] [drm] No driver support for vblank timestamp query.
[    2.142923] omapdrm omapdrm.0: No connectors reported connected with modes
[    2.149852] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.158493] [drm] Enabling DMM ywrap scrolling
[    2.161005] mmc1: MAN_BKOPS_EN bit is not set
[    2.162701] mmc1: new DDR MMC card at address 0001
[    2.173122] mmcblk1: mmc1:0001 8GME4R 7.28 GiB 
[    2.176469] Console: switching to colour frame buffer device 128x48
[    2.183336] mmcblk1boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
[    2.193519] mmcblk1boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
[    2.197767]  mmcblk1: p1 p2 p3
[    2.206010] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[    2.239747] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[    2.246048] hctosys: unable to open rtc device (rtc0)
[    2.261941] aic_dvdd_fixed: disabling
[    2.265626] vmmcwl_fixed: disabling
[    2.269336] ldousb: disabling
[    2.272765] ALSA device list:
[    2.275744]   No soundcards found.
[    2.321997] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.330165] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.350577] devtmpfs: mounted
[    2.353729] Freeing unused kernel memory: 328K (c0856000 - c08a8000)
[    2.360125] This architecture does not have kernel memory protection.
[    3.075849] systemd[1]: System time before build time, advancing clock.
[    3.243195] random: systemd: uninitialized urandom read (16 bytes read, 22 bits of entropy available)
[    3.261000] random: systemd: uninitialized urandom read (16 bytes read, 23 bits of entropy available)
[    3.272690] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[    3.292122] systemd[1]: Detected architecture arm.

Welcome to Arago 2016.10!

[    3.332086] systemd[1]: Set hostname to <VP2730>.
[    3.440886] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 24 bits of entropy available)
[    3.451914] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available)
[    3.462057] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 24 bits of entropy available)
[    3.530525] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 25 bits of entropy available)
[    3.638270] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.656331] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
[    3.909247] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    3.918800] random: systemd: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[    4.150278] systemd[1]: [/lib/systemd/system/nginx.service:1] Unknown section 't'. Ignoring.
[    4.452271] systemd[1]: sysinit.target: Found ordering cycle on sysinit.target/start
[    4.460131] systemd[1]: sysinit.target: Found dependency on alignment.service/start
[    4.467826] systemd[1]: sysinit.target: Found dependency on basic.target/start
[    4.475121] systemd[1]: sysinit.target: Found dependency on sockets.target/start
[    4.482853] systemd[1]: sysinit.target: Found dependency on avahi-daemon.socket/start
[    4.490738] systemd[1]: sysinit.target: Found dependency on sysinit.target/start
[    4.498171] systemd[1]: sysinit.target: Breaking ordering cycle by deleting job alignment.service/start
[    4.507617] systemd[1]: alignment.service: Job alignment.service/start deleted to break ordering cycle starting with sysinit.target/start
[ SKIP ] Ordering cycle found, skipping alignment.service
[    4.540942] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    4.614458] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    4.638634] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    4.658519] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    4.678653] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    4.698608] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    4.718524] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    4.738708] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    4.759824] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    4.788797] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    4.808578] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    4.829138] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    4.888720] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    4.920677] systemd[1]: Starting Setup Virtual Console...
         Starting Setup Virtual Console...
[    4.950705] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    4.969008] CMEMK module: reference Linux version 4.4.32
[    4.975006] allocated heap buffer 0x40500000 of size 0x100000
[    4.981892] systemd[1]: Created slice system-getty.slice.
[    4.985722] cmemk initialized
[  OK  ] Created slice system-getty.slice.
[    5.006129] cryptodev: driver 1.8 loaded.
[    5.048732] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required st... nodes for the current kernel...
[    5.090671] systemd[1]: Mounting Debug File System...
         Mounting Debug File System...
[    5.178551] systemd[1]: Mounting Temporary Directory...
         Mounting Temporary Directory...
[    5.200640] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[    5.228601] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    5.249423] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.258625] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    5.289698] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    5.358774] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    5.378589] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    5.404911] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Debug File System.
[    5.428690] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    5.458624] systemd[1]: Mounted Temporary Directory.
[  OK  ] Mounted Temporary Directory.
[    5.488904] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    5.509530] systemd[1]: Failed to start Load Kernel Modules.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[    5.568632] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[    5.576074] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[    5.584963] systemd[1]: Started Setup Virtual Console.
[  OK  ] Started Setup Virtual Console.
[    5.609740] systemd[1]: Started Create list of required static device nodes for the current kernel.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[    5.639880] systemd[1]: Started Remount Root and Kernel File Systems.
[  OK  ] Started Remount Root and Kernel File Systems.
[    5.668772] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
         Starting udev Coldplug all Devices...
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
[    6.135234] systemd-journald[149]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /media/ram...
         Mounting /var/volatile...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /var/volatile.
[  OK  ] Mounted /media/ram.
[  OK  ] Started udev Coldplug all Devices.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[    7.207962] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000
[    7.216395]  remoteproc0: 58820000.ipu is available
[    7.222891]  remoteproc0: Note: remoteproc is still under development and considered experimental.
         Starting Synchronize System and HW clocks...[    7.235489]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.

[    7.250125] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000
[    7.257964]  remoteproc1: 55020000.ipu is available
[    7.263733]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[    7.273902]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    7.290911] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000
[    7.312218]  remoteproc2: 40800000.dsp is available
[    7.331567]  remoteproc2: Note: remoteproc is still under development and considered experimental.
[    7.342226]  remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    7.376196] omap-rproc 41000000.dsp: assigned reserved memory node dsp2_cma@9f000000
[    7.397597]  remoteproc3: 41000000.dsp is available
[    7.405402]  remoteproc3: Note: remoteproc is still under development and considered experimental.
[  OK  ] Found device /dev/ttyS2.
[    7.424850]  remoteproc3: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[FAILED] Failed to start Synchronize System and HW clocks.
See 'systemctl status sync-clocks.service' for details.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[    7.604551] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20
[    7.694865] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2
[    7.701081] alg: skcipher: setkey failed on test 5 for ecb-des-omap: flags=100
[    7.709097] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100
[    7.717113] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-omap: flags=100
[    7.782819] wm8994_i2c_probe
[    7.785751] wm8994_device_init
[    7.789639] wm8994: wm8994_set_pdata_from_of
[    7.793925] wm8994: gpio-cfg 0 0x10000
[    7.797686] wm8994: gpio-cfg 1 0x10000
[    7.804422] wm8994: gpio-cfg 2 0x10000
[    7.808189] wm8994: gpio-cfg 3 0x10000
[    7.811985] wm8994: gpio-cfg 4 0x10000
[    7.815746] wm8994: gpio-cfg 5 0x10000
[    7.819520] wm8994: gpio-cfg 6 0x10000
[    7.823293] wm8994: gpio-cfg 7 0x10000
[    7.827461] wm8994: gpio-cfg 8 0x10000
[    7.831246] wm8994: gpio-cfg 9 0x10000
[    7.835006] wm8994: gpio-cfg 10 0x10000
[    7.841961] 0-001b supply DCVDD not found, using dummy regulator
[    7.848474] 0-001b supply AVDD1 not found, using dummy regulator
[    7.855156] wm8994 0-001b: WM8994 revision D CUST_ID 00
[    7.860963] wm8994: regmap_register_patch
[    7.867693] wm8994: wm8994_ldo_in_use
[    7.871545] wm8994: wm8994_ldo_in_use
[    7.875371] wm8994: WM8994_POWER_MANAGEMENT_1 0x3 0x0
[    7.880470] wm8994: WM8994_POWER_MANAGEMENT_2 0x6050 0x6000
[    7.886075] wm8994: WM8994_POWER_MANAGEMENT_3 0x3cf0 0x0
[    7.891777] wm8994: WM8994_ANTIPOP_1 0x80 0x0
[    7.896151] wm8994: WM8994_ANTIPOP_2 0x64 0x0
[    7.900559] wm8994: WM8994_LEFT_LINE_INPUT_1_2_VOLUME 0x10b 0x8b
[    7.906589] wm8994: WM8994_RIGHT_LINE_INPUT_1_2_VOLUME 0x10b 0x8b
[    7.912717] wm8994: WM8994_INPUT_MIXER_2 0x33 0x0
[    7.917437] wm8994: WM8994_LINE_OUTPUTS_VOLUME 0x00 0x66
[    7.922791] wm8994: WM8994_OUTPUT_MIXER_1 0x5 0x0
[    7.927866] wm8994: WM8994_OUTPUT_MIXER_2 0x5 0x0
[    7.932607] wm8994: WM8994_LINE_MIXER_1 0x31 0x0
[    7.937242] wm8994 0-001b: No interrupt specified, no interrupts
[    7.943621] wm8994_device_init done
[    8.177794]  remoteproc1: registered virtio0 (type 7)
[    8.287687] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1
[  OK  ] Listening on dropbear.socket.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Login Service...
[  OK  ] Started Kernel Logging Service.
         Starting nginx.service...
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started D-Bus System Message Bus.
[    8.868888] aic_dvdd_fixed: supplied by vdd_3v3
[    9.108589]  remoteproc0: registered virtio1 (type 7)
[    9.344779] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc2
[    9.682082] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin
[    9.738514] vpe 489d0000.vpe: Device registered as /dev/video0
[    9.922844] SCSI subsystem initialized
[   10.261143] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[   10.338644] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled
[   10.350468] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[   10.378400] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[   10.412185] scsi host0: ahci
[   10.416013] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 346
[   10.426147] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3
[   10.778375] ata1: SATA link down (SStatus 0 SControl 300)
[   10.821023] EXT4-fs (mmcblk1p3): mounting ext3 file system using the ext4 subsystem
[   10.858876] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
[   11.979381] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok
[   12.070133] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices
[   12.087865] irq: no irq domain found for /ocp/pruss@4b200000/intc@4b220000 !
[   12.095535] irq: no irq domain found for /ocp/pruss@4b200000/intc@4b220000 !
[   12.103068] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices
[   12.112209] irq: no irq domain found for /ocp/pruss@4b280000/intc@4b2a0000 !
[   12.124475] irq: no irq domain found for /ocp/pruss@4b280000/intc@4b2a0000 !
[   12.132619] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3
[   12.544574] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   12.823359]  remoteproc4: 4b234000.pru0 is available
[   12.838442]  remoteproc4: Note: remoteproc is still under development and considered experimental.
[   12.847933]  remoteproc4: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting Network Service...
         Starting Telephony service...
         Starting Permit User Sessions...
         Starting Print notice about GPLv3 packages...
         Starting uim-sysfs.service...
[  OK  ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf.
[   13.575189]  remoteproc2: registered virtio2 (type 7)
[   13.583808] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3
[   13.598329] vip 48970000.vip: loading firmware vpdma-1b8.bin
[   13.618380] vip 48970000.vip: VPDMA firmware loaded
[   13.623320] vip 48970000.vip: vip_of_probe, reg: 0
[   13.623430] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1
[   13.640547]  remoteproc3: registered virtio3 (type 7)
[   13.646648] vip 48990000.vip: loading firmware vpdma-1b8.bin
[   13.662616] vip 489b0000.vip: loading firmware vpdma-1b8.bin
[   13.671212]  remoteproc4: registered virtio4 (type 7)
[   13.677437] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss@4b200000/pru0@4b234000 probed successfully
[   13.696203]  remoteproc5: 4b238000.pru1 is available
[   13.696206]  remoteproc5: Note: remoteproc is still under development and considered experimental.
[   13.696209]  remoteproc5: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   13.718376] vip 489b0000.vip: VPDMA firmware loaded
[   13.718395] vip 489b0000.vip: vip_of_probe, reg: 1
[   13.718422] vip 48990000.vip: VPDMA firmware loaded
[   13.718432] vip 48990000.vip: vip_of_probe, reg: 0
[   13.732080] vip 48990000.vip: vip_of_probe, videoNR: 3
[   13.732087] vip 48990000.vip: vip_of_probe, sync_type: 1, pclk-sample: 0
[   13.734825] vip 489b0000.vip: vip_of_probe, videoNR: 6
[   13.734830] vip 489b0000.vip: vip_of_probe, sync_type: 0, pclk-sample: 0
[   13.738083]  remoteproc5: registered virtio5 (type 7)
[   13.738117] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss@4b200000/pru1@4b238000 probed successfully
[   13.738417]  remoteproc6: 4b2b4000.pru0 is available
[   13.738420]  remoteproc6: Note: remoteproc is still under development and considered experimental.
[   13.738422]  remoteproc6: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   13.763702]  remoteproc6: registered virtio6 (type 7)
[   13.763741] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss@4b280000/pru0@4b2b4000 probed successfully
[   13.764026]  remoteproc7: 4b2b8000.pru1 is available
[   13.764029]  remoteproc7: Note: remoteproc is still under development and considered experimental.
[   13.764031]  remoteproc7: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[   13.769030] adv7612 3-004c: select_input: port 0 selected
[   13.776412] adv7612 3-004c: adv76xx_set_edid: spa_loc 0x99
[   13.785438]  remoteproc7: registered virtio7 (type 7)
[   13.785470] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss@4b280000/pru1@4b2b8000 probed successfully
[   13.804049] vip 48990000.vip: vip_of_probe, reg: 1
[   13.819337] vip 48990000.vip: vip_of_probe, videoNR: 4
[   13.819344] vip 48990000.vip: vip_of_probe, sync_type: 1, pclk-sample: 0
[   13.855939] vip 48970000.vip: vip_of_probe, videoNR: 1
[   13.855945] vip 48970000.vip: vip_of_probe, sync_type: 1, pclk-sample: 0
[  OK  ] Started System Logging Service.
[   13.984874] random: nonblocking pool is initialized
[   14.028138] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   14.081102] vip 48970000.vip: vip_of_probe, reg: 1
         Starting Save/Restore Sound Card State...
[   14.120371] vip 48970000.vip: vip_of_probe, videoNR: 2
[   14.125551] vip 48970000.vip: vip_of_probe, sync_type: 1, pclk-sample: 0
[  OK  ] Started Permit User Sessions.
[   14.267451] net eth1: initializing cpsw version 1.15 (0)
[  OK  ] Started Network Service.
[   14.288549] net eth0: initialized cpsw ale version 1.4
[   14.309637] net eth0: ALE Table size 1024
[   14.324496] libphy: PHY 48485000.mdio:02 not found
[   14.345651] net eth1: phy "48485000.mdio:02" not found on slave 1, err -19
[   14.686719] Bluetooth: Core ver 2.21
[   14.695635] NET: Registered protocol family 31
[   14.707700] Bluetooth: HCI device and connection manager initialized


