Xshell 5 (Build 0555) Copyright (c) 2002-2015 NetSarang Computer, Inc. All rights reserved. Type `help' to learn how to use Xshell prompt. [c:\~]$ Connecting to COM13... Connected. U-Boot SPL 2020.01-gf9b0d030d3 (Jun 17 2020 - 15:08:08 +0000) SYSFW ABI: 3.0 (firmware rev 0x0014 '20.04.1-v2020.04a (Terrific Lla') Trying to boot from MMC2 Loading Environment from MMC... *** Warning - No MMC card found, using default environment Remoteproc 2 started successfully ** File not found /lib/firmware/j7-mcu-r5f0_0-fw ** Starting ATF on ARM64 core... NOTICE: BL31: v2.3():07.00.00.005-dirty NOTICE: BL31: Built : 14:33:55, Jun 17 2020 U-Boot SPL 2020.01-gf9b0d030d3 (Jun 17 2020 - 14:34:25 +0000) SYSFW ABI: 3.0 (firmware rev 0x0014 '20.04.1-v2020.04a (Terrific Lla') Detected: J7X-BASE-CPB rev E3 Detected: J7X-INFOTAN-EXP rev E3 Detected: J7X-VSC8514-ETH rev E2 Trying to boot from MMC2 U-Boot 2020.01-gf9b0d030d3 (Jun 17 2020 - 14:34:25 +0000) SoC: J721E SR1.0 Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev E7 DRAM: 4 GiB not found for dev hbmc-mux Flash: 0 Bytes MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Detected: J7X-BASE-CPB rev E3 Detected: J7X-INFOTAN-EXP rev E3 Detected: J7X-VSC8514-ETH rev E2 Net: Warning: ethernet@046000000 using MAC address from ROM eth0: ethernet@046000000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 55 bytes read in 3 ms (17.6 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... 1513584 bytes read in 35 ms (41.2 MiB/s) Load Remote Processor 6 with data@addr=0x80080000 1513584 bytes: Success! 1513584 bytes read in 35 ms (41.2 MiB/s) Load Remote Processor 7 with data@addr=0x80080000 1513584 bytes: Success! 9314288 bytes read in 197 ms (45.1 MiB/s) Load Remote Processor 8 with data@addr=0x80080000 9314288 bytes: Success! 16654344 bytes read in 348 ms (45.6 MiB/s) 89857 bytes read in 4 ms (21.4 MiB/s) 1719 bytes read in 3 ms (559.6 KiB/s) ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 00000000fdda1000, end 00000000fdeb9fff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 5.4.40-g66cf445b76 (oe-user@oe-host) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 SMP PREEMPT Wed Jun 17 14:28:47 UTC 2020 [ 0.000000] Machine model: Texas Instruments K3 J721E SoC [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-dma-memory@ac000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ce000000, size 720 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@ce000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fb000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@fb000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fb100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@fb100000, compatible id shared-dma-pool [ 0.000000] cma: Failed to reserve 512 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 2 pages/cpu s48408 r8192 d74472 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 35779 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs) root=PARTUUID=f494d26d-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x9a800000-0x9e800000] (64MB) [ 0.000000] Memory: 2584064K/2293760K available (9534K kernel code, 776K rwdata, 3840K rodata, 1728K init, 695K bss, 18446744073709261312K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008c00c0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008c00d0000 [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x438 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000002] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008343] Console: colour dummy device 80x25 [ 0.012906] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023574] pid_max: default: 32768 minimum: 301 [ 0.028323] LSM: Security Framework initializing [ 0.033070] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.040640] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.072694] ASID allocator initialised with 32768 entries [ 0.086221] rcu: Hierarchical SRCU implementation. [ 0.099180] Platform MSI: gic-its@1820000 domain created [ 0.104785] PCI/MSI: /interconnect@100000/interrupt-controller@1800000/gic-its@1820000 domain created [ 0.122220] smp: Bringing up secondary CPUs ... [ 0.159189] Detected PIPT I-cache on CPU1 [ 0.159211] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.159221] GICv3: CPU1: using allocated LPI pending table @0x00000008c00e0000 [ 0.159250] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.159302] smp: Brought up 1 node, 2 CPUs [ 0.188647] SMP: Total of 2 processors activated. [ 0.193452] CPU features: detected: 32-bit EL0 Support [ 0.198705] CPU features: detected: CRC32 instructions [ 0.210316] CPU: All CPU(s) started at EL2 [ 0.214512] alternatives: patching kernel code [ 0.219568] devtmpfs: initialized [ 0.227534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.237504] futex hash table entries: 512 (order: -1, 32768 bytes, linear) [ 0.244678] pinctrl core: initialized pinctrl subsystem [ 0.250414] NET: Registered protocol family 16 [ 0.255135] DMA: preallocated 256 KiB pool for atomic allocations [ 0.261612] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.276650] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages [ 0.283503] HugeTLB registered 512 MiB page size, pre-allocated 0 pages [ 0.290263] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.298941] cryptd: max_cpu_qlen set to 1000 [ 0.306098] vsys_3v3: supplied by evm_12v0 [ 0.310421] vsys_5v0: supplied by evm_12v0 [ 0.315076] iommu: Default domain type: Translated [ 0.320225] SCSI subsystem initialized [ 0.324343] mc: Linux media interface: v0.10 [ 0.328733] videodev: Linux video capture interface: v2.00 [ 0.334344] pps_core: LinuxPPS API ver. 1 registered [ 0.339413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.348750] PTP clock support registered [ 0.352761] EDAC MC: Ver: 3.0.0 [ 0.356468] FPGA manager framework [ 0.359982] Advanced Linux Sound Architecture Driver Initialized. [ 0.366538] clocksource: Switched to clocksource arch_sys_counter [ 0.372866] VFS: Disk quotas dquot_6.6.0 [ 0.376910] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.386437] Carveout Heap: Exported 512 MiB at 0x00000000ae000000 [ 0.392671] thermal_sys: Registered thermal governor 'step_wise' [ 0.392672] thermal_sys: Registered thermal governor 'power_allocator' [ 0.399055] NET: Registered protocol family 2 [ 0.410450] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear) [ 0.419210] TCP established hash table entries: 32768 (order: 2, 262144 bytes, linear) [ 0.427407] TCP bind hash table entries: 32768 (order: 3, 524288 bytes, linear) [ 0.435165] TCP: Hash tables configured (established 32768 bind 32768) [ 0.441903] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 0.448793] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 0.456188] NET: Registered protocol family 1 [ 0.460928] RPC: Registered named UNIX socket transport module. [ 0.466980] RPC: Registered udp transport module. [ 0.471784] RPC: Registered tcp transport module. [ 0.476586] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.483169] PCI: CLS 0 bytes, default 64 [ 0.487505] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.498881] Initialise system trusted keyrings [ 0.503519] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.512129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.518467] NFS: Registering the id_resolver key type [ 0.523642] Key type id_resolver registered [ 0.527913] Key type id_legacy registered [ 0.532010] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.539038] 9p: Installing v9fs 9p2000 file system support [ 0.552027] Key type asymmetric registered [ 0.556224] Asymmetric key parser 'x509' registered [ 0.561238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.568799] io scheduler mq-deadline registered [ 0.573426] io scheduler kyber registered [ 0.578613] pinctrl-single 4301c000.pinmux: 94 pins, size 376 [ 0.584673] pinctrl-single 11c000.pinmux: 173 pins, size 692 [ 0.590838] pinctrl-single a40000.timesync_router: 512 pins, size 2048 [ 0.599860] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.606124] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.612451] ti-pat 31010000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.618860] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.626836] ti-pat 31011000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.633246] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.641169] ti-pat 31012000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.647579] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.655499] ti-pat 31013000.pat: Found PAT Rev 1.0 with 2048 pages [ 0.661819] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.669731] ti-pat 31014000.pat: Found PAT Rev 1.0 with 2048 pages [ 0.676053] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 0.685372] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.697230] brd: module loaded [ 0.703247] loop: module loaded [ 0.706787] sysfs: cannot create duplicate filename '/devices/platform/dma_buf_phys' [ 0.714710] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.40-g66cf445b76 #1 [ 0.721819] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 0.727774] Call trace: [ 0.730271] dump_backtrace+0x0/0x140 [ 0.734005] show_stack+0x14/0x20 [ 0.737389] dump_stack+0xb4/0xf8 [ 0.740774] sysfs_warn_dup+0x5c/0x78 [ 0.744508] sysfs_create_dir_ns+0xd8/0xf0 [ 0.748687] kobject_add_internal+0x94/0x280 [ 0.753043] kobject_add+0x90/0xf8 [ 0.756512] device_add+0xdc/0x600 [ 0.759980] platform_device_add+0xfc/0x228 [ 0.764247] platform_device_register_full+0xc8/0x140 [ 0.769405] dma_buf_phys_init+0x68/0x94 [ 0.773406] do_one_initcall+0x50/0x190 [ 0.777320] kernel_init_freeable+0x194/0x22c [ 0.781765] kernel_init+0x10/0xfc [ 0.785234] ret_from_fork+0x10/0x18 [ 0.788895] kobject_add_internal failed for dma_buf_phys with -EEXIST, don't try to register things with the same name in the same directory. [ 0.802997] libphy: Fixed MDIO Bus: probed [ 0.807343] tun: Universal TUN/TAP device driver, 1.6 [ 0.812763] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.820766] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.826830] sky2: driver version 1.30 [ 0.831060] VFIO - User Level meta-driver version: 0.3 [ 0.836664] i2c /dev entries driver [ 0.840747] sdhci: Secure Digital Host Controller Interface driver [ 0.847061] sdhci: Copyright(c) Pierre Ossman [ 0.851708] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.857940] ledtrig-cpu: registered to indicate activity on CPUs [ 0.864679] optee: probing for conduit method from DT. [ 0.869943] optee: revision 3.8 (199fca17) [ 0.870261] optee: initialized driver [ 0.878985] NET: Registered protocol family 17 [ 0.883601] 9pnet: Installing 9P2000 support [ 0.887989] Key type dns_resolver registered [ 0.892500] registered taskstats version 1 [ 0.896687] Loading compiled-in X.509 certificates [ 0.905170] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.911487] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.919075] ti-sci 44083000.dmsc: ABI: 3.0 (firmware rev 0x0014 '20.04.1-v2020.04a (Terrific Lla') [ 0.944793] random: fast init done [ 0.972482] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 0.979809] omap_i2c 40b00000.i2c: bus 0 rev0.12 at 100 kHz [ 0.985803] omap_i2c 40b10000.i2c: bus 1 rev0.12 at 100 kHz [ 0.991764] omap_i2c 42120000.i2c: bus 2 rev0.12 at 100 kHz [ 0.997827] pca953x 3-0020: 3-0020 supply vcc not found, using dummy regulator [ 1.027054] pca953x 3-0022: 3-0022 supply vcc not found, using dummy regulator [ 1.035142] GPIO line 481 (MCASP/TRACE_MUX_S0) hogged as output/low [ 1.041736] GPIO line 482 (MCASP/TRACE_MUX_S1) hogged as output/high [ 1.048571] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz [ 1.054483] omap_i2c 2020000.i2c: bus 4 rev0.12 at 100 kHz [ 1.060415] pca953x 5-0020: 5-0020 supply vcc not found, using dummy regulator [ 2.074698] pca953x 5-0020: failed writing register [ 2.079736] pca953x: probe of 5-0020 failed with error -16 [ 2.085451] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz [ 2.091347] omap_i2c 2040000.i2c: bus 6 rev0.12 at 100 kHz [ 2.097211] omap_i2c 2050000.i2c: bus 7 rev0.12 at 100 kHz [ 2.103455] ti-sci-intr interconnect@100000:interconnect@28380000:interrupt-controller2: Interrupt Router 137 domain created [ 2.115020] ti-sci-intr interconnect@100000:interrupt-controller0: Interrupt Router 131 domain created [ 2.124626] ti-sci-intr interconnect@100000:navss@30000000:interrupt-controller1: Interrupt Router 213 domain created [ 2.135633] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created [ 3.151710] j721e-pcie 2900000.pcie: host bridge /interconnect@100000/pcie@2900000 ranges: [ 3.160211] j721e-pcie 2900000.pcie: IO 0x10001000..0x10010fff -> 0x10001000 [ 3.167700] j721e-pcie 2900000.pcie: MEM 0x10011000..0x17ffffff -> 0x10011000 [ 3.175245] j721e-pcie 2900000.pcie: PCI host bridge to bus 0000:00 [ 3.181650] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.187255] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x10001000-0x10010fff]) [ 3.196945] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff] [ 3.203985] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400 [ 3.210140] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.220009] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits [ 3.229895] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xe8 may corrupt adjacent RW1C bits [ 3.239853] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x3e may corrupt adjacent RW1C bits [ 3.249820] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x92 may corrupt adjacent RW1C bits [ 3.259782] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0xb2 may corrupt adjacent RW1C bits [ 3.269779] pci 0000:00:00.0: supports D1 [ 3.273873] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.279745] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x84 may corrupt adjacent RW1C bits [ 3.289710] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x208 may corrupt adjacent RW1C bits [ 3.299761] pci 0000:00:00.0: reg 0x224: [mem 0x00000000-0x003fffff 64bit] [ 3.306787] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x00ffffff 64bit] (contains BAR0 for 4 VFs) [ 3.316753] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x210 may corrupt adjacent RW1C bits [ 3.326800] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x210 may corrupt adjacent RW1C bits [ 3.338336] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.347852] pci_bus 0000:01: busn_res: [bus 01-0f] end is updated to 01 [ 3.354623] pci 0000:00:00.0: BAR 7: assigned [mem 0x10400000-0x113fffff 64bit] [ 3.362100] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.367352] pcieport 0000:00:00.0: PME: Signaling with IRQ 33 [ 3.373386] pcieport 0000:00:00.0: AER: enabled with IRQ 33 [ 4.378504] j721e-pcie 2910000.pcie: host bridge /interconnect@100000/pcie@2910000 ranges: [ 4.386969] j721e-pcie 2910000.pcie: IO 0x18001000..0x18010fff -> 0x18001000 [ 4.394445] j721e-pcie 2910000.pcie: MEM 0x18011000..0x1fffffff -> 0x18011000 [ 4.401975] j721e-pcie 2910000.pcie: PCI host bridge to bus 0001:00 [ 4.408380] pci_bus 0001:00: root bus resource [bus 00-0f] [ 4.413984] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x18001000-0x18010fff]) [ 4.423852] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff] [ 4.430888] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400 [ 4.437090] pci 0001:00:00.0: supports D1 [ 4.441184] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 4.448480] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.457975] pci_bus 0001:01: busn_res: [bus 01-0f] end is updated to 01 [ 4.464742] pci 0001:00:00.0: PCI bridge to [bus 01] [ 4.469969] pcieport 0001:00:00.0: PME: Signaling with IRQ 36 [ 4.475962] pcieport 0001:00:00.0: AER: enabled with IRQ 36 [ 5.478508] j721e-pcie 2920000.pcie: host bridge /interconnect@100000/pcie@2920000 ranges: [ 5.486975] j721e-pcie 2920000.pcie: IO 0x4400001000..0x4400010fff -> 0x00001000 [ 5.494806] j721e-pcie 2920000.pcie: MEM 0x4400011000..0x4407ffffff -> 0x00011000 [ 5.502696] j721e-pcie 2920000.pcie: PCI host bridge to bus 0002:00 [ 5.509101] pci_bus 0002:00: root bus resource [bus 00-0f] [ 5.514707] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x1000-0x10fff]) [ 5.523953] pci_bus 0002:00: root bus resource [mem 0x4400011000-0x4407ffffff] (bus address [0x00011000-0x07ffffff]) [ 5.534720] pci 0002:00:00.0: [104c:b00d] type 01 class 0x060400 [ 5.540922] pci 0002:00:00.0: supports D1 [ 5.545016] pci 0002:00:00.0: PME# supported from D0 D1 D3hot [ 5.552294] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.561789] pci_bus 0002:01: busn_res: [bus 01-0f] end is updated to 01 [ 5.568555] pci 0002:00:00.0: PCI bridge to [bus 01] [ 5.573781] pcieport 0002:00:00.0: PME: Signaling with IRQ 39 [ 5.579770] pcieport 0002:00:00.0: AER: enabled with IRQ 39 [ 5.586145] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 [ 5.596023] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 5.602782] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 5.611655] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 [ 5.621800] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 5.628559] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 5.636254] omap8250 40a00000.serial: PM domain pd:149 will not be powered off [ 5.643805] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 7, base_baud = 6000000) is a 8250 [ 5.653046] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 18, base_baud = 3000000) is a 8250 [ 5.661791] printk: console [ttyS2] enabled [ 5.661791] printk: console [ttyS2] enabled [ 5.670228] printk: bootconsole [ns16550a0] disabled [ 5.670228] printk: bootconsole [ns16550a0] disabled [ 5.680580] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 19, base_baud = 3000000) is a 8250 [ 5.689421] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 20, base_baud = 3000000) is a 8250 [ 5.698172] arm-smmu-v3 36600000.smmu: ias 48-bit, oas 48-bit (features 0x00001faf) [ 5.707076] arm-smmu-v3 36600000.smmu: allocated 524288 entries for cmdq [ 5.715940] arm-smmu-v3 36600000.smmu: allocated 524288 entries for evtq [ 5.723496] arm-smmu-v3 36600000.smmu: msi_domain absent - falling back to wired irqs [ 5.732243] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 5.742754] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled [ 5.752906] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 5.763145] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled [ 5.773912] scsi host0: ufshcd [ 5.780713] cadence-qspi 47040000.spi: mt35xu512aba (65536 Kbytes) [ 5.786895] 7 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 5.793492] Creating 7 MTD partitions on "47040000.spi.0": [ 5.798974] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 [ 5.798975] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 5.817294] 0x000000080000-0x000000280000 : "ospi.tispl" [ 5.822969] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 5.828778] 0x000000680000-0x0000006a0000 : "ospi.env" [ 5.834290] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 5.840439] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 5.846126] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 5.863538] cdns-ufshcd 4e84000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 5.875209] cdns-ufshcd 4e84000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 5.886520] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G8T23BAILB 0300 PQ: 0 ANSI: 6 [ 5.895350] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G8T23BAILB 0300 PQ: 0 ANSI: 6 [ 5.904070] cdns-ufshcd 4e84000.ufs: ufshcd_scsi_add_wlus: BOOT WLUN not found [ 6.094791] cadence-qspi 47040000.spi: Cadence QSPI NOR probe failed -517 [ 6.102502] cadence-qspi 47050000.spi: mt25qu512a (65536 Kbytes) [ 6.138756] cadence-qspi 47050000.spi: Cadence QSPI NOR probe failed -517 [ 6.182541] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 6.190186] libphy: 46000f00.mdio: probed [ 6.195233] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 [ 6.203496] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 [ 6.214912] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517 [ 6.223527] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 6.232074] mmc0: CQHCI version 5.10 [ 6.270442] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit [ 6.279185] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 6.285753] davinci_gpio 42110000.gpio: IRQ index 4 not found [ 6.291526] davinci_gpio 42110000.gpio: IRQ not populated, err = -6 [ 6.301735] vdd_mmc1: supplied by vsys_3v3 [ 6.306466] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 6.313347] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 6.320176] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 6.327078] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 6.333896] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 6.343546] ti-udma 285c0000.dma-controller: Channels: 24 (tchan: 12, rchan: 12, gp-rflow: 8) [ 6.353898] ti-udma 31150000.dma-controller: Channels: 84 (tchan: 42, rchan: 42, gp-rflow: 16) [ 6.366004] cadence-qspi 47040000.spi: mt35xu512aba (65536 Kbytes) [ 6.372186] 7 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 6.378818] Creating 7 MTD partitions on "47040000.spi.0": [ 6.384305] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 6.390361] 0x000000080000-0x000000280000 : "ospi.tispl" [ 6.396064] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 6.401895] 0x000000680000-0x0000006a0000 : "ospi.env" [ 6.407505] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 6.413656] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 6.419415] 0x000000800000-0x000004000000 : "ospi.rootfs" [ 6.427570] cadence-qspi 47050000.spi: mt25qu512a (65536 Kbytes) [ 6.433702] mmc0: Command Queue Engine enabled [ 6.438139] mmc0: new HS400 MMC card at address 0001 [ 6.443834] mmcblk0: mmc0:0001 S0J56X 14.8 GiB [ 6.448515] mmcblk0boot0: mmc0:0001 S0J56X partition 1 31.5 MiB [ 6.454579] mmcblk0boot1: mmc0:0001 S0J56X partition 2 31.5 MiB [ 6.460592] mmcblk0rpmb: mmc0:0001 S0J56X partition 3 4.00 MiB, chardev (240:0) [ 6.506548] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 6.514197] libphy: 46000f00.mdio: probed [ 6.519276] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 [ 6.527543] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 [ 6.539722] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 6.546859] pps pps0: new PPS source ptp1 [ 6.550976] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010a, freq:500000000, add_val:1 pps:1 [ 6.559928] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 57.4 [ 6.567223] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 6.574205] mmc1: CQHCI version 5.10 [ 6.608622] mmc1: SDHCI controller on 4fb0000.sdhci [4fb0000.sdhci] using ADMA 64-bit [ 6.616785] davinci-mcasp 2ba0000.mcasp: IRQ common not found [ 6.627864] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 6.635236] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 6.642598] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 6.649914] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! [ 6.657959] hctosys: unable to open rtc device (rtc0) [ 6.676687] ALSA device list: [ 6.679649] No soundcards found. [ 6.683293] Waiting for root device PARTUUID=f494d26d-02... [ 8.052504] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 8.059363] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 8.069731] mmcblk1: p1 p2 [ 8.128701] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 8.136820] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 8.149553] devtmpfs: mounted [ 8.152889] Freeing unused kernel memory: 1728K [ 8.157438] Run /sbin/init as init process [ 8.343283] systemd[1]: System time before build time, advancing clock. [ 8.415544] NET: Registered protocol family 10 [ 8.420406] Segment Routing with IPv6 [ 8.445667] systemd[1]: systemd 244.3+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 8.467415] systemd[1]: Detected architecture arm64. Welcome to Arago 2020.05! [ 8.517269] systemd[1]: Set hostname to . [ 8.675735] systemd[1]: Configuration file /lib/systemd/system/systemd-firstboot.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.691023] systemd[1]: Configuration file /lib/systemd/system/systemd-firstboot.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 8.720328] systemd[1]: Configuration file /lib/systemd/system/var-lib-machines.mount is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.735351] systemd[1]: Configuration file /lib/systemd/system/var-lib-machines.mount is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 8.778383] systemd[1]: Configuration file /lib/systemd/system/strongswan.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.793066] systemd[1]: Configuration file /lib/systemd/system/strongswan.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 8.817160] systemd[1]: Configuration file /lib/systemd/system/machines.target is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.831571] systemd[1]: Configuration file /lib/systemd/system/machines.target is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 8.863321] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. [ 8.887117] systemd[1]: Configuration file /lib/systemd/system/busybox-syslog.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.902137] systemd[1]: Configuration file /lib/systemd/system/busybox-syslog.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 8.920913] systemd[1]: Configuration file /lib/systemd/system/busybox-klogd.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 8.935846] systemd[1]: Configuration file /lib/systemd/system/busybox-klogd.service is marked world-writable. Please remove world writability permission bits. Proceeding anyway. [ 9.003994] random: systemd: uninitialized urandom read (16 bytes read) [ 9.010736] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 9.023063] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 9.032977] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 9.050621] random: systemd: uninitialized urandom read (16 bytes read) [ 9.057905] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 9.074609] random: systemd: uninitialized urandom read (16 bytes read) [ 9.081712] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 9.098708] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 9.122648] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 9.146646] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 9.162592] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 9.178584] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 9.194586] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 9.220784] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 9.238624] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 9.257502] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 9.278740] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 9.294709] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 9.324726] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 9.333061] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 9.350849] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 9.366875] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 9.386778] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 9.406680] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 9.425209] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 9.445800] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 9.465177] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 9.487732] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 9.514579] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 9.541204] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 9.568976] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ 9.594270] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 9.610988] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 9.623847] systemd[1]: Starting Journal Service... Starting Journal Service... [ 9.657363] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 9.681855] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems cryptodev: loading out-of-tree module taints kernel. [0m... [ 9.717845] systemd[1]: Starting udev Coldplug all Devices... [ 9.725256] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) Starting udev Coldplug all Devices... [ 9.731060] cryptodev: driver 1.10 loaded. [ 9.745162] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 9.763742] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Create list of sta… nodes for the current kernel. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Started Load Kernel Modules. [ OK ] Started Remount Root and Kernel File Systems. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 9.974445] systemd-journald[225]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... [ OK ] Reached target Containers. Mounting /var/volatile... Starting udev Kernel Device Manager... [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. Starting Network Time Synchronization... [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. Starting Network Time Synchronization... [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. Starting Network Time Synchronization... [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ 10.704572] rti-wdt 2200000.rti: heartbeat 60 sec [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ 10.762901] rti-wdt 2210000.rti: heartbeat 60 sec [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 10.823034] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-dma-memory@a7000000 [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API. [ OK ] Listening on dropbear.socket. Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Docker Socket for the API. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Kernel Logging Service. [ 10.996331] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ OK ] Started System Logging Service. [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. [ 11.063157] remoteproc remoteproc0: 4d80800000.dsp is available Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ 11.115843] remoteproc remoteproc0: powering up 4d80800000.dsp [ 11.122216] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-dma-memory@a6000000 [ 11.122812] remoteproc remoteproc0: Booting fw image j7-c66_0-fw, size 1513584 [ OK ] Started irqbalance daemon. [ 11.147699] k3-dsp-rproc 4d80800000.dsp: DSP initialized in IPC-only mode Starting rc.pvr.service... [ 11.165130] remoteproc0#vdev0buffer: assigned reserved memory node c66-dma-memory@a7000000 [ 11.180132] virtio_rpmsg_bus virtio0: rpmsg host is online [ 11.183906] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 11.186476] k3-dsp-rproc 4d81800000.dsp: configured DSP for IPC-only mode [ 11.199629] remoteproc0#vdev0buffer: registered virtio0 (type 7) [ 11.205783] remoteproc remoteproc0: remote processor 4d80800000.dsp is now up Starting Login Service... [ OK ] Started TEE Supplicant. [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started IPv6 Packet Filtering Framework. [ OK ] Started IPv4 Packet Filtering Framework. [ OK ] Reached target Network (Pre). Starting Network Service... [ OK ] Started Network Service. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started Login Service. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Permit User Sessions... [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Started Serial Getty on ttyS3. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Avahi mDNS/DNS-SD Stack. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ 11.984391] remoteproc remoteproc1: 4d81800000.dsp is available [ 12.133194] platform 41000000.r5f: configured R5F for remoteproc mode [ 12.241241] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma-memory@a8000000 [ 12.276238] remoteproc remoteproc1: powering up 4d81800000.dsp [ 12.282572] remoteproc remoteproc1: Booting fw image j7-c66_1-fw, size 1513584 [ 12.294702] k3-dsp-rproc 4d81800000.dsp: DSP initialized in IPC-only mode [ 12.298564] random: crng init done [ 12.304533] remoteproc1#vdev0buffer: assigned reserved memory node c66-dma-memory@a6000000 [ 12.304875] random: 7 urandom warning(s) missed due to ratelimiting [ 12.318727] virtio_rpmsg_bus virtio1: rpmsg host is online [ 12.325032] remoteproc1#vdev0buffer: registered virtio1 (type 7) [ 12.342321] remoteproc remoteproc1: remote processor 4d81800000.dsp is now up [ 12.352757] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ OK ] Started Load/Save Random Seed. [ 12.440728] platform 41000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 [ 12.553317] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 12.638788] remoteproc remoteproc2: 41000000.r5f is available [ 12.703347] remoteproc remoteproc3: 64800000.dsp is available [ 12.767263] remoteproc remoteproc2: Direct firmware load for j7-mcu-r5f0_0-fw failed with error -2 [ 12.778235] remoteproc remoteproc2: powering up 41000000.r5f [ 12.787421] remoteproc remoteproc2: Direct firmware load for j7-mcu-r5f0_0-fw failed with error -2 [ 12.789947] TI DP83867 46000f00.mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=46000f00.mdio:00, irq=POLL) [ 12.802581] remoteproc remoteproc2: request_firmware failed: -2 [ 12.823362] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down [ 12.836241] platform 5c00000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 13.105069] remoteproc remoteproc3: powering up 64800000.dsp [ 13.110775] remoteproc remoteproc3: Booting fw image j7-c71_0-fw, size 9314288 [ 13.122702] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode [ 13.123435] platform 5c00000.r5f: configured R5F for IPC-only mode [ 13.134593] remoteproc3#vdev0buffer: assigned reserved memory node c71-dma-memory@a8000000 [ 13.151008] virtio_rpmsg_bus virtio2: rpmsg host is online [ 13.153100] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 13.156516] remoteproc3#vdev0buffer: registered virtio2 (type 7) [ 13.176999] remoteproc remoteproc3: remote processor 64800000.dsp is now up [ 13.254328] platform 5c00000.r5f: assigned reserved memory node r5f-dma-memory@a1000000 [ 13.282442] remoteproc remoteproc4: 5c00000.r5f is available [ 13.317645] platform 5d00000.r5f: configured R5F for remoteproc mode [ 13.351175] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000 [ 13.446987] remoteproc remoteproc5: 5d00000.r5f is available [ 13.476725] remoteproc remoteproc4: powering up 5c00000.r5f [ 13.482349] remoteproc remoteproc4: Booting fw image j7-main-r5f0_0-fw, size 5511492 [ 13.494697] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 13.504823] remoteproc4#vdev0buffer: assigned reserved memory node r5f-dma-memory@a1000000 [ 13.519302] virtio_rpmsg_bus virtio3: rpmsg host is online [ 13.529583] remoteproc4#vdev0buffer: registered virtio3 (type 7) [ 13.538423] remoteproc remoteproc4: remote processor 5c00000.r5f is now up [ 13.549979] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15 [ 13.557308] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe [ 13.570292] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd [ 13.582647] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x15 [ 13.592737] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15 [ 13.604382] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe [ 13.614818] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 13.622494] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 13.629739] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xe [ 13.640886] virtio_rpmsg_bus virtio3: creating channel ti.ethfw.notifyservice addr 0x1e [ 13.653001] virtio_rpmsg_bus virtio3: creating channel rpmsg-kdrv addr 0x1a [ 13.667614] rpmsg-kdrv-eth-switch rpmsg-kdrv-2-mpu_1_0_ethswitch-device-0: Device info: permissions: 07FFFFFF uart_id: 2 [ 13.668024] remoteproc remoteproc5: Direct firmware load for j7-main-r5f0_1-fw failed with error -2 [ 13.681424] rpmsg-kdrv-eth-switch rpmsg-kdrv-2-mpu_1_0_ethswitch-device-0: FW ver 0.1 (rev 1) 16/Jul/2020 SHA: [ 13.694599] remoteproc remoteproc5: powering up 5d00000.r5f [ 13.708573] remoteproc remoteproc5: Direct firmware load for j7-main-r5f0_1-fw failed with error -2 [ 13.712061] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xe [ 13.723984] remoteproc remoteproc5: request_firmware failed: -2 [ 13.750176] platform 5e00000.r5f: configured R5F for remoteproc mode [ 13.783707] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 13.853867] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac loaded [ 13.863476] platform 5e00000.r5f: assigned reserved memory node r5f-dma-memory@a4000000 [ 13.866591] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: rdev_features:00000003 rdev_mtu:1522 flow_id:172 tx_psil_dst_id:4A00 [ 13.892655] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: local_mac_addr:00:00:00:00:00:00 rdev_mac_addr:70:ff:76:1d:92:c1 [ 13.914921] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 13.926585] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ OK ] Started rc.pvr.service. Starting weston.service... [ 14.036213] remoteproc remoteproc6: 5e00000.r5f is available [ 14.191569] remoteproc remoteproc6: Direct firmware load for j7-main-r5f1_0-fw failed with error -2 [ 14.203652] remoteproc remoteproc6: powering up 5e00000.r5f [ 14.211209] platform 5f00000.r5f: configured R5F for remoteproc mode [ 14.217631] remoteproc remoteproc6: Direct firmware load for j7-main-r5f1_0-fw failed with error -2 [ 14.226786] remoteproc remoteproc6: request_firmware failed: -2 [ 14.402184] platform 5f00000.r5f: assigned reserved memory node r5f-dma-memory@a5000000 [ 14.581303] remoteproc remoteproc7: 5f00000.r5f is available [ 14.706806] remoteproc remoteproc7: Direct firmware load for j7-main-r5f1_1-fw failed with error -2 [ 14.719319] remoteproc remoteproc7: powering up 5f00000.r5f [ 14.726580] remoteproc remoteproc7: Direct firmware load for j7-main-r5f1_1-fw failed with error -2 [ 14.740443] remoteproc remoteproc7: request_firmware failed: -2 [ 14.751365] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 14.762556] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 14.867456] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 14.876192] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Created slice system-systemd\x2dfsck.slice. [ 15.007315] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.016875] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.029891] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.042628] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.053157] remoteproc remoteproc8: b034000.pru is available [ 15.059277] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.066789] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.101902] pru-rproc b034000.pru: PRU rproc node /interconnect@100000/icssg@b000000/pru@34000 probed successfully [ 15.212291] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.222574] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.235785] remoteproc remoteproc9: b004000.rtu is available [ 15.246575] omap_rng 4e10000.trng: Random Number Generator ver. 241b34c [ 15.264484] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.274093] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.286908] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.294482] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.307426] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.317490] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.318140] pru-rproc b004000.rtu: PRU rproc node /interconnect@100000/icssg@b000000/rtu@4000 probed successfully [ 15.439158] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.446662] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.457114] pru-rproc b00a000.txpru: IRQ vring not found [ 15.488502] pru-rproc b00a000.txpru: IRQ kick not found [ 15.529071] remoteproc remoteproc10: b00a000.txpru is available [ 15.603738] pru-rproc b00a000.txpru: PRU rproc node /interconnect@100000/icssg@b000000/txpru@a000 probed successfully [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1 15.675603] cdns-usb3 6000000.usb: DRD version v1 (ID: 0004024e, rev: 00000200) 0m... [ 15.752602] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.762591] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.782789] remoteproc remoteproc11: b038000.pru is available [ 15.837108] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 15.845426] cdns-usb3 6400000.usb: DRD version v1 (ID: 0004024e, rev: 00000200) [ 15.852805] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 15.869750] pru-rproc b038000.pru: PRU rproc node /interconnect@100000/icssg@b000000/pru@38000 probed successfully [ OK ] Started File System Check on /dev/mmcblk1p1. Mounting /run/media/mmcblk1p1... ***************************************************************[ 15.902284] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 **************************************************************[ 15.918581] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 * NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils cifs-utils coreutils-dev coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gstreamer1.0-libav gzip less libasm1 libbfd libcairo-perf-utils libdw1 libel[ 15.954857] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 f1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib [ 15.971415] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 libgettextsrc libgmp-dev libgmp10 libgmpxx4 libidn2-0 libmpc3 libmpfr6 libreadline-dev libreadline7 libreadlin[ 15.987909] remoteproc remoteproc12: b006000.rtu is available e8 libunistring2 m4-dev m4 make nettle parted tar which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can [ 16.012166] usbcore: registered new interface driver usbfs [ 16.014925] pru-rproc b006000.rtu: PRU rproc node /interconnect@100000/icssg@b000000/rtu@6000 probed successfully be done using the opkg remove command. i.e.: opkg remove [ 16.030717] usbcore: registered new interface driver hub Where is the name printed in the list above[ 16.044197] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.053203] usbcore: registered new device driver usbyou [ 16.054756] pru-rproc b00c000.txpru: IRQ vring not found will be notified of the dependent packages. You should [ 16.068238] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 use the --force-removal-of-dependent-packages option to also remove the dependent packages as well ***************[ 16.090665] pru-rproc b00c000.txpru: IRQ kick not found ************************************************ *************************************************************** [ 16.103184] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.103489] remoteproc remoteproc13: b00c000.txpru is available [ OK ] Mounted /run/media/mmcblk1p1. [ 16.126472] pru-rproc b00c000.txpru: PRU rproc node /interconnect@100000/icssg@b000000/txpru@c000 probed successfully [ OK ] Started Print notice about GPLv3 packages. [ 16.150594] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 16.155340] remoteproc remoteproc14: b134000.pru is available [ 16.165257] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.176529] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.182218] xhci-hcd xhci-hcd.2.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000000000010010 [ 16.186932] pru-rproc b134000.pru: PRU rproc node /interconnect@100000/icssg@b100000/pru@34000 probed successfully [ 16.207407] xhci-hcd xhci-hcd.2.auto: irq 509, io mem 0x06410000 [ 16.224820] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 16.231172] remoteproc remoteproc15: b104000.rtu is available [ 16.240091] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.244020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.248583] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.265762] pru-rproc b104000.rtu: PRU rproc node /interconnect@100000/icssg@b100000/rtu@4000 probed successfully [ 16.276535] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac started [ 16.282954] usb usb1: Product: xHCI Host Controller [ 16.290797] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.299294] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.310585] usb usb1: Manufacturer: Linux 5.4.40-g66cf445b76 xhci-hcd [ 16.311466] pru-rproc b10a000.txpru: IRQ vring not found [ 16.344205] usb usb1: SerialNumber: xhci-hcd.2.auto [ 16.348130] pru-rproc b10a000.txpru: IRQ kick not found [ 16.359115] hub 1-0:1.0: USB hub found [ 16.362965] remoteproc remoteproc16: b10a000.txpru is available [ 16.369172] hub 1-0:1.0: 1 port detected [ 16.376501] pru-rproc b10a000.txpru: PRU rproc node /interconnect@100000/icssg@b100000/txpru@a000 probed successfully [ 16.384188] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.395903] remoteproc remoteproc17: b138000.pru is available [ 16.395972] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 16.407138] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.410655] pru-rproc b138000.pru: PRU rproc node /interconnect@100000/icssg@b100000/pru@38000 probed successfully [ 16.414752] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.434742] remoteproc remoteproc18: b106000.rtu is available [ 16.440510] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.447334] pru-rproc b106000.rtu: PRU rproc node /interconnect@100000/icssg@b100000/rtu@6000 probed successfully [ 16.454767] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.463106] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 16.465084] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.479868] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 16.491968] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.500171] pru-rproc b10c000.txpru: IRQ vring not found [ 16.505489] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.516822] pru-rproc b10c000.txpru: IRQ kick not found [ 16.526151] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.540009] remoteproc remoteproc19: b10c000.txpru is available [ 16.549425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 16.563928] pru-rproc b10c000.txpru: PRU rproc node /interconnect@100000/icssg@b100000/txpru@c000 probed successfully [ 16.578563] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.586218] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.596304] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.596518] usb usb2: Product: xHCI Host Controller [ 16.710571] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 16.719912] usb usb2: Manufacturer: Linux 5.4.40-g66cf445b76 xhci-hcd [ 16.738549] usb usb2: SerialNumber: xhci-hcd.2.auto [ 16.746811] hub 2-0:1.0: USB hub found [ 16.759455] hub 2-0:1.0: 1 port detected [ 16.767440] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.778216] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.788743] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.802569] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 [ 16.862843] usb 1-1: New USB device found, idVendor=0451, idProduct=8142, bcdDevice= 1.00 [ 16.874543] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 16.886564] usb 1-1: SerialNumber: D00200797885 [ 16.892787] hub 1-1:1.0: USB hub found [ 16.902557] hub 1-1:1.0: 4 ports detected [ 16.908182] j721e-audio sound@0: ASoC: failed to init link CPB pcm3168a DAC: -517 [ 16.918553] j721e-audio sound@0: devm_snd_soc_register_card() failed: -517 _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org j7-evm ttyS2 Arago 2020.05 j7-evm ttyS2 j7-evm login: [ 29.503463] Initializing XFRM netlink socket [ 31.983010] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 31.996909] Bridge firewalling registered j7-evm login: root root@j7-evm:~# 2;125R -sh: 2: command not found -sh: 125R: command not found root@j7-evm:~# root@j7-evm:~# root@j7-evm:~# cam.out-evm:~# cd /opt/vision_apps;source ./vision_apps_init.sh;./vx_app_single_c APP: Init ... !!! MEM: Init ... !!! MEM: Initialized DMA HEAP (fd=4) !!! MEM: Init ... Done !!! IPC: Init ... !!! [MCU2_0] 0.000000 s: CIO: Init ... Done !!! [MCU2_0] 0.000000 s: ### CPU Frequency , [MCU2_0] 0.000000 s: APP: Init ... !!! [MCU2_0] 0.000000 s: SCICLIENT: Init ... !!! [MCU2_0] 0.000000 s: SCICLIENT: DMSC FW version [20.04.1-v2020.04a (Terrific Lla] [MCU2_0] 0.000000 s: SCICLIENT: DMSC FW revision 0x14 [MCU2_0] 0.000000 s: SCICLIENT: DMSC FW ABI revision 3.0 [MCU2_0] 0.000000 s: SCICLIENT: Init ... Done !!! [MCU2_0] 0.000000 s: UDMA: Init ... !!! [MCU2_0] 0.000000 s: UDMA: Init ... Done !!! [MCU2_0] 0.000000 s: MEM: Init ... !!! [MCU2_0] 0.000000 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d2800000 of size 16777216 bytes !!! [MCU2_0] 0.000000 s: MEM: Created heap (DDR_NON_CACHE_ME, id=5, flags=0x00000000) @ ce000000 of size 67108864 bytes !!! [MCU2_0] 0.000000 s: MEM: Init ... Done !!! [MCU2_0] 0.000000 s: FVID2: Init ... !!! [MCU2_0] 0.000000 s: FVID2: Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: Init ... !!! [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState module=290 state=2 [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState module=48 state=2 [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState module=305 state=2 [MCU2_0] 0.000000 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 0.000000 s: VHWA: DOF Init ... !!! [MCU2_0] 0.000000 s: VHWA: DOF Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: LDC Init ... !!! [MCU2_0] 0.000000 s: VHWA: LDC Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: MSC Init ... !!! [MCU2_0] 0.000000 s: VHWA: MSC Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: NF Init ... !!! [MCU2_0] 0.000000 s: VHWA: NF Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: SDE Init ... !!! [MCU2_0] 0.000000 s: VHWA: SDE Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: VISS Init ... !!! [MCU2_0] 0.000000 s: VHWA: VISS Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: VDEC Init ... !!! [MCU2_0] 0.000000 s: VHWA: VDEC Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: VENC Init ... !!! [MCU2_0] 0.000000 s: VHWA: VENC Init ... Done !!! [MCU2_0] 0.000000 s: VHWA: Init ... Done !!! [MCU2_0] 0.000000 s: IPC: Init ... !!! [MCU2_0] 0.000000 s: IPC: 5 CPUs participating in IPC !!! [MCU2_0] 0.000000 s: IPC: Waiting for HLOS to be ready ... !!! [MCU2_0] 18.962389 s: IPC: HLOS is ready !!! [MCU2_0] 18.967358 s: IPC: Init ... Done !!! [MCU2_0] 18.967415 s: APP: Syncing with 4 CPUs ... !!! [MCU2_0] 18.967449 s: APP: Syncing with 4 CPUs ... Done !!! [MCU2_0] 18.967477 s: REMOTE_SERVICE: Init ... !!! [MCU2_0] 18.968787 s: REMOTE_SERVICE: Init ... Done !!! [MCU2_0] 18.968846 s: ETHFW: Init ... !!! [MCU2_0] 19.040970 s: ETHFW: Version : 0.01.01 [MCU2_0] 19.041036 s: ETHFW: Build Date: Jul 16, 2020 [MCU2_0] 19.041067 s: ETHFW: Build Time: 15:14:45 [MCU2_0] 19.041089 s: ETHFW: Commit SHA: [MCU2_0] 19.041110 s: ETHFW: Init ... DONE !!! [MCU2_0] 19.041132 s: ETHFW: Remove server Init ... !!! [MCU2_0] 19.084886 s: ETHFW: Remove server Init ... DONE !!! [MCU2_0] 19.084958 s: DSS: Init ... !!! [MCU2_0] 19.084985 s: DSS: Display type is HDMI !!! [MCU2_0] 19.085007 s: DSS: SoC init ... !!! [MCU2_0] 19.085025 s: SCICLIENT: Sciclient_pmSetModuleState module=152 state=2 [MCU2_0] 19.085221 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.085254 s: SCICLIENT: Sciclient_pmSetModuleClkParent module=152 clk=4 parent=6 [MCU2_0] 19.085344 s: SCICLIENT: Sciclient_pmSetModuleClkParent success [MCU2_0] 19.085373 s: SCICLIENT: Sciclient_pmSetModuleClkFreq module=152 clk=4 freq=148500000 [MCU2_0] 19.089884 s: SCICLIENT: Sciclient_pmSetModuleClkFreq success [MCU2_0] 19.089919 s: SCICLIENT: Sciclient_pmModuleClkRequest module=152 clk=4 state=2 flag=0 [MCU2_0] 19.090008 s: SCICLIENT: Sciclient_pmModuleClkRequest success [MCU2_0] 19.090037 s: DSS: SoC init ... Done !!! [MCU2_0] 19.090056 s: DSS: Board init ... !!! [MCU2_0] 19.135889 s: DSS: Board init ... Done !!! [MCU2_0] 19.137224 s: DSS: Init ... Done !!! [MCU2_0] 19.137285 s: VX_ZONE_INIT:Enabled [MCU2_0] 19.137309 s: VX_ZONE_ERROR:Enabled [MCU2_0] 19.137328 s: VX_ZONE_WARNING:Enabled [MCU2_0] 19.140832 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [MCU2_0] 19.140909 s: APP: OpenVX Target kernel init ... !!! [MCU2_0] 19.148231 s: APP: OpenVX Target kernel init ... Done !!! [MCU2_0] 19.148286 s: CSI2RX: Init ... !!! [MCU2_0] 19.148308 s: SCICLIENT: Sciclient_pmSetModuleState module=25 state=2 [MCU2_0] 19.148403 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.148435 s: SCICLIENT: Sciclient_pmSetModuleState module=26 state=2 [MCU2_0] 19.148578 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.148604 s: SCICLIENT: Sciclient_pmSetModuleState module=27 state=2 [MCU2_0] 19.148743 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.148768 s: SCICLIENT: Sciclient_pmSetModuleState module=147 state=2 [MCU2_0] 19.148858 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.148916 s: SCICLIENT: Sciclient_pmSetModuleState module=148 state=2 [MCU2_0] 19.149014 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.149712 s: CSI2RX: Init ... Done !!! [MCU2_0] 19.149759 s: CSI2TX: Init ... !!! [MCU2_0] 19.149779 s: SCICLIENT: Sciclient_pmSetModuleState module=25 state=2 [MCU2_0] 19.149861 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.149929 s: SCICLIENT: Sciclient_pmSetModuleState module=28 state=2 [MCU2_0] 19.150075 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.150102 s: SCICLIENT: Sciclient_pmSetModuleState module=296 state=2 [MCU2_0] 19.150211 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 19.150803 s: CSI2TX: Init ... Done !!! [MCU2_0] 19.150842 s: ISS: Init ... !!! [MCU2_0] 19.150933 s: Found sensor AR0147-MAX96701 at location 0 [MCU2_0] 19.151020 s: Found sensor AR0233-MAX9295 at location 1 [MCU2_0] 19.151075 s: Found sensor AR0233-NO_SERDES at location 2 [MCU2_0] 19.151116 s: Found sensor AR0147LFM-MAX96701 at location 3 [MCU2_0] 19.151161 s: Found sensor AR0233LFM-MAX9295 at location 4 [MCU2_0] 19.151207 s: Found sensor AR0233LFM-NO_SERDES at location 5 [MCU2_0] 19.151248 s: Found sensor AR0233LFM-60FPS-NO_SERDES at location 6 [MCU2_0] 19.151291 s: Found sensor AR0233LFM-CS-NO_SERDES at location 7 [MCU2_0] 19.151317 s: IssSensor_Init ... Done !!! [MCU2_0] 19.151371 s: vissRemoteServer_Init ... Done !!! [MCU2_0] 19.151419 s: IttRemoteServer_Init ... Done !!! [MCU2_0] 19.151446 s: UDMA Copy: Init ... !!! [MCU2_0] 19.152720 s: UDMA Copy: Init ... Done !!! [MCU2_0] 19.152771 s: APP: Init ... Done !!! [MCU2_0] 19.152796 s: APP: Run ... !!! [MCU2_0] 19.152814 s: IPC: Starting echo test ... [MCU2_0] 19.154805 s: APP: Run ... Done !!! [MCU2_0] 19.156112 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] C66X_1[P] C66X_2[.] C7X_1[.] [MCU2_0] 19.156262 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] C66X_1[P] C66X_2[P] C7X_1[.] [MCU2_0] 19.156362 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] C66X_1[P] C66X_2[P] C7X_1[P] [C6x_1 ] 3.900597 s: CIO: Init ... Done !!! [C6x_1 ] 3.900629 s: ### CPU Frequency , [C6x_1 ] 3.900642 s: APP: Init ... !!! [C6x_1 ] 3.900649 s: SCICLIENT: Init ... !!! [C6x_1 ] 3.900722 s: SCICLIENT: DMSC FW version [20.04.1-v2020.04a (Terrific Lla] [C6x_1 ] 3.900734 s: SCICLIENT: DMSC FW revision 0x14 [C6x_1 ] 3.900743 s: SCICLIENT: DMSC FW ABI revision 3.0 [C6x_1 ] 3.900752 s: SCICLIENT: Init ... Done !!! [C6x_1 ] 3.900761 s: UDMA: Init ... !!! [C6x_1 ] 3.901679 s: UDMA: Init ... Done !!! [C6x_1 ] 3.901702 s: MEM: Init ... !!! [C6x_1 ] 3.901715 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d4000000 of size 16777216 bytes !!! [C6x_1 ] 3.901732 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 800000 of size 229376 bytes !!! [C6x_1 ] 3.901747 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ d5000000 of size 50331648 bytes !!! [C6x_1 ] 3.901763 s: MEM: Init ... Done !!! [C6x_1 ] 3.901770 s: IPC: Init ... !!! [C6x_1 ] 3.901781 s: IPC: 5 CPUs participating in IPC !!! [C6x_1 ] 3.901794 s: IPC: Waiting for HLOS to be ready ... !!! [C6x_1 ] 16.623231 s: IPC: HLOS is ready !!! [C6x_1 ] 16.626879 s: IPC: Init ... Done !!! [C6x_1 ] 16.626912 s: APP: Syncing with 4 CPUs ... !!! [C6x_1 ] 18.967449 s: APP: Syncing with 4 CPUs ... Done !!! [C6x_1 ] 18.967461 s: REMOTE_SERVICE: Init ... !!! [C6x_1 ] 18.968006 s: REMOTE_SERVICE: Init ... Done !!! [C6x_1 ] 18.968046 s: VX_ZONE_INIT:Enabled [C6x_1 ] 18.968056 s: VX_ZONE_ERROR:Enabled [C6x_1 ] 18.968065 s: VX_ZONE_WARNING:Enabled [C6x_1 ] 18.968893 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C6x_1 ] 18.968910 s: APP: OpenVX Target kernel init ... !!! [C6x_1 ] 18.969212 s: APP: OpenVX Target kernel init ... Done !!! [C6x_1 ] 18.969233 s: UDMA Copy: Init ... !!! [C6x_1 ] 18.971110 s: UDMA Copy: Init ... Done !!! [C6x_1 ] 18.971129 s: APP: Init ... Done !!! [C6x_1 ] 18.971493 s: APP: Run ... !!! [C6x_1 ] 18.971506 s: IPC: Starting echo test ... [C6x_1 ] 18.972452 s: APP: Run ... Done !!! [C6x_1 ] 18.972759 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[s] C66X_2[x] C7X_1[P] [C6x_1 ] 18.973010 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[s] C66X_2[P] C7X_1[P] [C6x_1 ] 19.155803 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] C66X_1[s] C66X_2[P] C7X_1[P] [C6x_2 ] 3.952062 s: CIO: Init ... Done !!! [C6x_2 ] 3.952096 s: ### CPU Frequency , [C6x_2 ] 3.952109 s: APP: Init ... !!! [C6x_2 ] 3.952117 s: SCICLIENT: Init ... !!! [C6x_2 ] 3.952189 s: SCICLIENT: DMSC FW version [20.04.1-v2020.04a (Terrific Lla] [C6x_2 ] 3.952202 s: SCICLIENT: DMSC FW revision 0x14 [C6x_2 ] 3.952210 s: SCICLIENT: DMSC FW ABI revision 3.0 [C6x_2 ] 3.952220 s: SCICLIENT: Init ... Done !!! [C6x_2 ] 3.952229 s: UDMA: Init ... !!! [C6x_2 ] 3.953157 s: UDMA: Init ... Done !!! [C6x_2 ] 3.953181 s: MEM: Init ... !!! [C6x_2 ] 3.953194 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d8000000 of size 16777216 bytes !!! [C6x_2 ] 3.953212 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 800000 of size 229376 bytes !!! [C6x_2 ] 3.953227 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ d9000000 of size 50331648 bytes !!! [C6x_2 ] 3.953243 s: MEM: Init ... Done !!! [C6x_2 ] 3.953251 s: IPC: Init ... !!! [C6x_2 ] 3.953263 s: IPC: 5 CPUs participating in IPC !!! [C6x_2 ] 3.953276 s: IPC: Waiting for HLOS to be ready ... !!! [C6x_2 ] 17.761801 s: IPC: HLOS is ready !!! [C6x_2 ] 17.765324 s: IPC: Init ... Done !!! [C6x_2 ] 17.765356 s: APP: Syncing with 4 CPUs ... !!! [C6x_2 ] 18.967449 s: APP: Syncing with 4 CPUs ... Done !!! [C6x_2 ] 18.967461 s: REMOTE_SERVICE: Init ... !!! [C6x_2 ] 18.968018 s: REMOTE_SERVICE: Init ... Done !!! [C6x_2 ] 18.968058 s: VX_ZONE_INIT:Enabled [C6x_2 ] 18.968068 s: VX_ZONE_ERROR:Enabled [C6x_2 ] 18.968077 s: VX_ZONE_WARNING:Enabled [C6x_2 ] 18.968888 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C6x_2 ] 18.968906 s: APP: OpenVX Target kernel init ... !!! [C6x_2 ] 18.969213 s: APP: OpenVX Target kernel init ... Done !!! [C6x_2 ] 18.969234 s: UDMA Copy: Init ... !!! [C6x_2 ] 18.971234 s: UDMA Copy: Init ... Done !!! [C6x_2 ] 18.971253 s: APP: Init ... Done !!! [C6x_2 ] 18.971631 s: APP: Run ... !!! [C6x_2 ] 18.971643 s: IPC: Starting echo test ... [C6x_2 ] 18.972698 s: APP: Run ... Done !!! [C6x_2 ] 18.973013 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[P] C66X_2[s] C7X_1[.] [C6x_2 ] 18.973044 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[P] C66X_2[s] C7X_1[P] [C6x_2 ] 19.155844 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] C66X_1[P] C66X_2[s] C7X_1[P] [C7x_1 ] 4.171390 s: CIO: Init ... Done !!! [C7x_1 ] 4.171414 s: ### CPU Frequency , [C7x_1 ] 4.171432 s: APP: Init ... !!! [C7x_1 ] 4.171440 s: SCICLIENT: Init ... !!! [C7x_1 ] 4.171499 s: SCICLIENT: DMSC FW version [20.04.1-v2020.04a (Terrific Lla] [C7x_1 ] 4.171513 s: SCICLIENT: DMSC FW revision 0x14 [C7x_1 ] 4.171524 s: SCICLIENT: DMSC FW ABI revision 3.0 [C7x_1 ] 4.171535 s: SCICLIENT: Init ... Done !!! [C7x_1 ] 4.171544 s: UDMA: Init ... !!! [C7x_1 ] 4.171676 s: UDMA: Init ... Done !!! [C7x_1 ] 4.171688 s: MEM: Init ... !!! [C7x_1 ] 4.171701 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ dc000000 of size 268435456 bytes !!! [C7x_1 ] 4.171723 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 70020000 of size 8159232 bytes !!! [C7x_1 ] 4.171741 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 64800000 of size 491520 bytes !!! [C7x_1 ] 4.171759 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 64e00000 of size 16384 bytes !!! [C7x_1 ] 4.171775 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ ec000000 of size 251658240 bytes !!! [C7x_1 ] 4.171794 s: MEM: Init ... Done !!! [C7x_1 ] 4.171803 s: IPC: Init ... !!! [C7x_1 ] 4.171813 s: IPC: 5 CPUs participating in IPC !!! [C7x_1 ] 4.171827 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_1 ] 18.594110 s: IPC: HLOS is ready !!! [C7x_1 ] 18.596277 s: IPC: Init ... Done !!! [C7x_1 ] 18.596290 s: APP: Syncing with 4 CPUs ... !!! [C7x_1 ] 18.967450 s: APP: Syncing with 4 CPUs ... Done !!! [C7x_1 ] 18.967466 s: REMOTE_SERVICE: Init ... !!! [C7x_1 ] 18.967745 s: REMOTE_SERVICE: Init ... Done !!! [C7x_1 ] 18.967768 s: VX_ZONE_INIT:Enabled [C7x_1 ] 18.967782 s: VX_ZONE_ERROR:Enabled [C7x_1 ] 18.967792 s: VX_ZONE_WARNING:Enabled [C7x_1 ] 18.967990 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C7x_1 ] 18.968004 s: APP: OpenVX Target kernel init ... !!! [C7x_1 ] 18.968083 s: APP: OpenVX Target kernel init ... Done !!! [C7x_1 ] 18.968100 s: APP: Init ... Done !!! [C7x_1 ] 18.968110 s: APP: Run ... !!! [C7x_1 ] 18.968118 s: IPC: Starting echo test ... [C7x_1 ] 18.968551 s: APP: Run ... Done !!! [C7x_1 ] 18.972819 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[P] C66X_2[x] C7X_1[s] [C7x_1 ] 18.973035 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] C66X_1[P] C66X_2[P] C7X_1[s] [C7x_1 ] 19.155883 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] C66X_1[P] C66X_2[P] C7X_1[s] IPC: Init ... Done !!! REMOTE_SERVICE: Init ... !!! REMOTE_SERVICE: Init ... Done !!! APP: Init ... Done !!! 76.124409 s: VX_ZONE_INIT:Enabled 76.124424 s: VX_ZONE_ERROR:Enabled 76.124428 s: VX_ZONE_WARNING:Enabled 76.124974 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! 76.125130 s: VX_ZONE_INIT:[tivxHostInit:48] Initialization Done for HOST !!! Single Camera Demo - (c) Texas Instruments 2019 ======================================================== Usage, ./vx_app_single_cam.out --cfg Defaulting to interactive mode IttCtrl_registerHandler: command echo registered at location 0 IttCtrl_registerHandler: command iss_read_2a_params registered at location 1 IttCtrl_registerHandler: command iss_write_2a_params registered at location 2 IttCtrl_registerHandler: command iss_raw_save registered at location 3 IttCtrl_registerHandler: command iss_yuv_save registered at location 4 IttCtrl_registerHandler: command iss_read_sensor_reg registered at location 5 IttCtrl_registerHandler: command iss_write_sensor_reg registered at location 6 IttCtrl_registerHandler: command dev_ctrl registered at location 7 IttCtrl_registerHandler: command iss_send_dcc_file registered at location 8 Thread created successfully NETWORK: Opened at IP Addr = 192.168.10.126, socket port=5000!!! Network_open returned 0 76.129305 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 0, kernel com.ti.hwa.display ... 76.129319 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 0, kernel com.ti.hwa.display ... done !!! appGrpxInit done - 0x0 76.157276 s: ISS: Enumerating sensors ... !!! 76.157624 s: ISS: Enumerating sensors ... found 0 : AR0147-MAX96701 76.157631 s: ISS: Enumerating sensors ... found 1 : AR0233-MAX9295 76.157635 s: ISS: Enumerating sensors ... found 2 : AR0233-NO_SERDES 76.157655 s: ISS: Enumerating sensors ... found 3 : AR0147LFM-MAX96701 76.157660 s: ISS: Enumerating sensors ... found 4 : AR0233LFM-MAX9295 76.157664 s: ISS: Enumerating sensors ... found 5 : AR0233LFM-NO_SERDES 76.157668 s: ISS: Enumerating sensors ... found 6 : AR0233LFM-60FPS-NO_SERDES 76.157672 s: ISS: Enumerating sensors ... found 7 : AR0233LFM-CS-NO_SERDES 8 sensor(s) found Supported sensor list: a : AR0147-MAX96701 b : AR0233-MAX9295 c : AR0233-NO_SERDES d : AR0147LFM-MAX96701 e : AR0233LFM-MAX9295 f : AR0233LFM-NO_SERDES g : AR0233LFM-60FPS-NO_SERDES h : AR0233LFM-CS-NO_SERDES Select a sensor [MCU2_0] 76.157321 s: ImageSensor_RemoteServiceHandler: IM_SENSOR_CMD_CREATE [MCU2_0] 76.157386 s: Sensor at index 0 = AR0147-MAX96701 [MCU2_0] 76.157417 s: Sensor at index 1 = AR0233-MAX9295 [MCU2_0] 76.157442 s: Sensor at index 2 = AR0233-NO_SERDES [MCU2_0] 76.157465 s: Sensor at index 3 = AR0147LFM-MAX96701 [MCU2_0] 76.157489 s: Sensor at index 4 = AR0233LFM-MAX9295 [MCU2_0] 76.157512 s: Sensor at index 5 = AR0233LFM-NO_SERDES [MCU2_0] 76.157535 s: Sensor at index 6 = AR0233LFM-60FPS-NO_SERDES [MCU2_0] 76.157560 s: Sensor at index 7 = AR0233LFM-CS-NO_SERDES c USE DCC Bin Files in SD Card ???? Yes : 1 No : 0 Choose :0 USE NSF4 ?? Yes : 1 No : 0 Choose :0 Sensor selected : AR0233-NO_SERDES Querying AR0233-NO_SERDES 84.913592 s: ISS: Querying sensor [AR0233-NO_SERDES] ... !!! 84.913799 s: ISS: Querying sensor [AR0233-NO_SERDES] ... Done !!! 84.913805 s: ISS: Initializing sensor [AR0233-NO_SERDES], doing IM_SENSOR_CMD_PWRON ... !!! 84.914118 s: ISS: Initializing sensor [AR0233-NO_SERDES], doing IM_SENSOR_CMD_CONFIG ... !!! [MCU2_0] 84.913651 s: ImageSensor_RemoteServiceHandler: IM_SENSOR_CMD_QUERY [MCU2_0] 84.913721 s: Received Query for AR0233-NO_SERDES [MCU2_0] 84.913859 s: ImageSensor_RemoteServiceHandler: IM_SENSOR_CMD_PWRON [MCU2_0] 84.913965 s: IM_SENSOR_CMD_PWRON : channel_mask = 0x1 [MCU2_0] 84.914183 s: ImageSensor_RemoteServiceHandler: IM_SENSOR_CMD_CONFIG [MCU2_0] 84.914234 s: Application requested features = 0x158 [MCU2_0] [MCU2_0] 84.914271 s: #SerDes Type = 0 , 100 [MCU2_0] 84.914299 s: Configuring camera # 0 [MCU2_0] 84.914322 s: [MCU2_0] ###### AR0233_DIRECT_Config[16] ####### [MCU2_0] 84.914348 s: ## AR0233 Direct_Config : WDR :: 1137 [MCU2_0] 84.963878 s: Configuring Direct AR0233 imager .. Please wait till it finishes 85.377052 s: ISS: Initializing sensor [AR0233-NO_SERDES] ... Done !!! [MCU2_0] 85.376876 s: AR0233 Direct config done [MCU2_0] 85.376948 s: IM_SENSOR_CMD_CONFIG returning status = 0 [Hive]Sing laneBandSpeed = 13 :: Csi Clock = 800 85.435276 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 0, kernel com.ti.capture ... 85.435298 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 0, kernel com.ti.capture ... done !!! 85.439608 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 1, kernel com.ti.hwa.vpac_viss ... 85.439615 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 1, kernel com.ti.hwa.vpac_viss ... done !!! 85.441666 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 2, kernel com.ti.imaging.aewb ... 85.441674 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 2, kernel com.ti.imaging.aewb ... done !!! 85.444723 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 3, kernel com.ti.hwa.vpac_msc_multi_scale ... 85.444730 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 3, kernel com.ti.hwa.vpac_msc_multi_scale ... done !!! 85.445455 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:578] kernel init for node 4, kernel com.ti.hwa.display ... 85.445461 s: VX_ZONE_ERROR:[ownGraphNodeKernelInit:589] kernel init for node 4, kernel com.ti.hwa.display ... done !!! Scaler is enabled [MCU2_0] 85.441301 s: ******************************************** [MCU2_0] 85.441390 s: ** HV AEWB Lib Version :: [0.0.9] CH:[0] ** [MCU2_0] 85.441433 s: ******************************************** ========================== HIVE monitor command ========================== mem_rd: memory read. ex) mem_rd address count mem_wr: memory write. ex) mem_wr address value aewb_get: get hive aewb data. ex) aewb_get command_id aewb_set: set hive aewb data. ex) aewb_set command_id value .... sen_wr : sensor register Write. sen_wr ID REG_ADD REG VAL ... sen_rd : sensor register Read. sen_wr ID REG_ADD ... print: Print performance statistics export: Export performance statistics save: Save Sensor RAW, VISS Output and H3A output images to File System exit: Exit **********[app_run_graph]*********** 85.451184 s: ISS: Starting sensor [AR0233-NO_SERDES] ... !!! [MCU2_0] 85.451294 s: ImageSensor_RemoteServiceHandler: IM_SENSOR_CMD_STREAM_ON [MCU2_0] 85.451369 s: IM_SENSOR_CMD_STREAM_ON: channel_mask = 0x1 [MCU2_0] 85.451405 s: #SerDes Type = 0 , 100 [MCU2_0] 85.451433 s: Starting camera # 0 [MCU2_0] 85.451476 s: Entering IssSensor_Start [MCU2_0] 85.451525 s: Warning : channel ID 0 already has a registered sensor handle 85.460936 s: ISS: Starting sensor [AR0233-NO_SERDES] ... !!!