U-Boot SPL 2023.04 (Dec 02 2024 - 02:13:01 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted *Starting ATF on ARM64 core...re... OK NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 I/TC: I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarcH64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/tC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls foR SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04 (Nov 28 2024 - 02:35:40 +0000) *Trying to boot from MMC2rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificatE to prevent boot failure. This will fail if the image was also encrypted U-Boot 2023.04 (Dec 02 2024 - 02:12:55 +0000) SoC: J721E SRUnknown Revision GP Model: Texas Instruments K3 J721E SoC Board: J721EX-PM2-SOM rev DRAM: 2 GiB (effective 4 GiB) Core: 108 devices, 34 uclasses, devicetree: separate Flash: 0 Bytes MMC: mmc@4f80000: 0, mmc@4fb0000: 1 Loading Environment from nowhere... OK In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Failed to probe am65_cpsw_nussdriver Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' === uEnv.txt 1392 bytes read in 29 ms (46.9 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... === .psdk_setup 1 bytes read in 29 ms (0 Bytes/s) Already setup. Timed out in wait_for_bb: status=1000 Timed out in wait_for_bb: status=1000 *pca953x gpio@20: Error reading output register i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@20: Error reading output register Timed out in wait_for_bb: status=1000 Timed out in wait_for_bb: status=1000 Timed out in wait_for_bb: status=1000 pca953x gpio@20: Error reading output register GPIO: 'gpio@22_17' not found Command 'gpio' failed: Error -22 Timed out in wait_for_bb: status=1000 pca953x gpio@20: Error reading output register i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@20: Error reading output register Timed out in wait_for_bb: status=1000 pca953x gpio@20: Error reading output register GPIO: 'gpio@22_16' not found Command 'gpio' failed: Error -22 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work Failed to load '/lib/firmware/j7-mcu-r5f0_1-fw' === /lib/firmware/j7-main-r5f0_0-fw 437920 bytes read in 49 ms (8.5 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 437920 bytes: Success! === /lib/firmware/j7-main-r5f0_1-fw 152424 bytes read in 38 ms (3.8 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 152424 bytes: Success! CAN Profile App:Can App Startu=== /lib/firmware/j7-main-r5f1_0-fw 150784 bytes read in 37 ms (3.9 MiB/s) p!Load Remote Processor 4 with data@addr=0x82000000 150784 bytes: Success! !! CAN Profile App:Wait For A72 SPL boot=== /lib/firmware/j7-main-r5f1_1-fw 150784 bytes read in 37 ms (3.9 MiB/s) eLoad Remote Processor 5 with data@addr=0x82000000 150784 bytes: Success! d... cAN Profile App:IPC App Startup!!! === /lib/firmware/j7-c66_0-fw 998192 bytes read in 72 ms (13.2 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 998192 bytes: Success! === /lib/firmware/j7-c66_1-fw 1002288 bytes read in 72 ms (13.3 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 1002288 bytes: Success! === /lib/firmware/j7-c71_0-fw 13504656 bytes read in 589 ms (21.9 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 13504656 bytes: Success! === /boot/Image 19384832 Bytes read in 830 ms (22.3 MiB/s) === /boot/dtb/ti/k3-j721e-common-proc-board.dtb 126958 bytes read in 35 ms (3.5 MiB/s) Working FDT set to 88000000 === /boot/dtb/ti/k3-j721e-vision-apps.dtbo 11287 bytes read in 29 ms (379.9 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=880000000 size=27000000 flags=4) Loading Device Tree to 000000008fedd000, end 000000008fffffff ... OK working FDT set to 8fedd000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 6.1.80 (yangjunyan@sz081) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #98 SMP PREEMPT Mon Dec 2 01:50:56 UTC 2024 [ 0.000000] Machine model: Texas Instruments J721e EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000008e0000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory poOl at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 Mib [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 31 MiB [ 0.000000] OF: reserved mem: initializeD node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c66-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c66-memory@a8100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c66-dma-memory@a9000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c66-memory@a9100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@ac000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2100000, size 95 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-memory@b2100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 192 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@d8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000e4000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-queues@e4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000e4800000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-buffers@e4800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 624 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] [ 0.000000] Movable zone start for each node- [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000b7ffffff] [ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000d7ffffff] [ 0.000000] node 0: [mem 0x00000000d8000000-0x00000000e5ffffff] [ 0.000000] node 0: [mem 0x00000000e6000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008a6ffffff] [ 0.000000] node 0: [mem 0x0000008a7000000-0x00000008ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920 [ 0.000000] Detected PIPT I-cache on CPU0 { 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=faf4c751-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 1695632K/4194304K available (11712K kernel code, 1266K rwdata, 3828K rodata, 1984K init, 438K bss, 1974384K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC:Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: fouNd redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8a8800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008a8030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008a8040000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008470] Console: colour dummy device 80x25 [ 0.013047] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023717] pid_max: default: 32768 minimum: 301 [ 0.028452] LSM: Security Framework initializing [ 0.033233] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.040807] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.049640] cblist_init_generic: Setting adjustable number of callback queues. [ 0.057043] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.06304] cblist_init_generic: Setting adjustable number of callback queues. [ 0.070690] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.077000] rcu: Hierarchical SRCU implementation. [ 0.081898] rcu: Max phase no-delay instances is 1000.- [ 0.087420] Platform MSI: msi-controller@1820000 domain created [ 0.093728] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.103179] EFI services will not be available. [ 0.107930] smp: Bringing uP secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot [ 0.121170] Detected PIPT I-cache on CPU1 [ 0.121238] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.121250] GICv3: CPU1: using allocated LPI pending table @0x00000008a8050000 [ 0.121287] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.121342] smp: Brought up 1 node, 2 CPUs [ 0.150688] SMP: Total of 2 processors activated. [ 0.155493] CpU features: detected: 32-bit EL0 Support [ 0.160746] CPU features: detected: CRC32 instructions [ 0.166023] CPU: All CPU(s) started at EL2 [ 0.170204] alternatives: applying system-wide alternatives [ 0.176880] devtmpfs: initialized [ .187961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.197953] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.213429] pinctrl core: initialized pinctrl subsystem [ 0.219152] DMI not present or invalid. [ 0.223420] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.230111] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.237444] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.245447] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.253575] audit: initializing netlink subsys (disabled) *[ 0.259460] thermal_sys: Registered thermal governor 'step_wise'dit_enabled=0 res=1 [ 0.267130] thermal_sys: Registered thermal governor 'power_allocator' [ 0.273337] cpuidle: using governor menu [ 0.284108] hw-breakpoint: found 6 breakpoint and 4 watchpoint Registers. [ 0.291076] ASID allocator initialised with 65536 entries [ 0.306220] platform a40000.pinctrl: Fixed dependency cycle(s) with /bus@100000/pinctrl@a40000/mcu-cpsw-cpts [ 0.318192] KASLR disabled due to lack of seed [ 0.325635] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.332571] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.338978] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.345912] HugeTLB: 0 KiB vmemmap can be fReed for a 32.0 MiB page [ 0.352313] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.359246] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.365647] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.372580] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.379741] k3-chipinfo 43000014.chipid: Family:J721E rev:SR3.0 JTAGID[0x2bb6402f] Detected [ 0.389242] iommu: Default domain type: Translated [ 0.394230] iommu: DMA domain TlB invalidation policy: strict mode [ 0.400765] SCSI subsystem initialized [ 0.404747] usbcore: registered new interface driver usbfs [ 0.410368] usbcore: registered new interface driver hub [ 0.415804] usbcore: registered new device driveR usb [ 0.421195] pps_core: LinuxPPS API ver. 1 registered [ 0.426266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.435606] PTP clock support registered [ 0.439685] EDAC MC: Ver: 3.0.0 [ 0.443424] FPGA manager framework [ 0.446937] Advanced Linux Sound Architecture Driver Initialized. [ 0.453588] clocksource: Switched to clocksource arch_sys_counter [ 0.459931] VFS: Disk quotas dquot_6.6.0 [ 0.463965] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.473955] Carveout Heap: Exported 512 MiB at 0x00000000b8000000 [ 0.480252] NET: Registered PF_INET protocol family [ 0.485445] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.494485] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.503252] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.511189] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.519394] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.528116] TCP: Hash tables configured (established 32768 bind 32768) [ 0.534925] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.541852] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.549328] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.555449] RPC: Registered named UNIX socket transport module. [ 0.561511] RPC: Registered udp transport module. [ 0.566314] RPC: Registered tcp transport module. [ 0.571116] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.577706] NET: Registered PF_XDP protocol family [ 0.582615] PCI: CLS 0 bytes, default 64 [ 0.587219] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.596286] Initialise system trusted keyrings [ 0.600953] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.609552] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.615802] NFS: Registering the id_resolver key type [ 0.620993] Key type id_resolver registered [ 0.625265] Key type id_legacy registered [ 0.629383] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.636232} nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.662960] Key type asymmetric registered [ 0.667143] Asymmetric key parser 'x509' registered [ 0.672154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.679792] io scheduler mq-deadline registered [ 0.684424] io scheduler kyber registered [ 0.690885] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 [ 0.697326] pinctrl-single 11c000.pinctrl: 173 pins, size 692 [ 0.704107] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.713719] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.722222] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf) [ 0.730452] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq [ 0.737619] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq [ 0.745665] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs [ 0.756785] loop: module loaded [ 0.760739] megasas: 07.719.03.00-rc1 [ 0.766148] tun: Universal TUN/TAP device driver, 1.6 [ 0.771729] VFIO - User Level meta-driver version: 0.3 [ 0.777402] usbcore: registered new interface driver usb-storage [ 0.783870] i2c_dev: i2c /dev entries driver [ 0.788829] sdhci: Secure Digital Host Controller Interface driver [ 0.795149] sdhci: Copyright(c) Pierre Ossman [ 0.799753] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.805993] ledtrig-cpu: registered to indicate activity on CPUs [ 0.812231] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.818963] usbcore: registered new interface driver usbhid [ 0.824657] usbhid: USB HID core driver [ 0.829083] optee: probing for conduit method. I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 0.833641] optee: revision 4.1 (012cdca4) [ 0.850071] optee: dynamic shared memory is enabled [ 0.859461] optee: initialized driver [ 0.864720] Initializing XFRM netlink socket [ 0.869112] NET: Registered PF_PACKET protocol family [ 0.874325] Key type dns_resolver registered [ 0.878891] registered taskstats version 1 [ 0.883089] Loading compiled-in X.509 certificates [ 0.894416] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') [ 0.953151] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 0.959528] pca953x 1-0020: supply vcc not found, using dummy regulator [ 0.966365] pca953x 1-0020: using no AI [ 1.977592] omap_i2c 2000000.i2c: timeout waiting for bus ready [ 1.983645] pca953x 1-0020: failed writing register [ 1.988701] pca953x: probe of 1-0020 failed with error -16 [ 1.994430] pca953x 1-0022: supply vcc not found, using dummy regulator [ 2.001238] pca953x 1-0022: using AI [ 3.009591] omap_i2c 2000000.i2c: timeout waiting for bus ready [ 3.015644] pca953x 1-0022: failed writing register [ 3.020674] pca953x: probe of 1-0022 failed with error -16 [ 3.026361] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz [ 3.032444] omap_i2c 2020000.i2c: bus 2 rev0.12 at 400 kHz [ 3.038470] omap_i2c 2060000.i2c: bus 3 rev0.12 at 400 kHz- [ 3.044308] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created [ 3.052867] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created [ 3.062213] ti-sci-intr 310e0000.interrupt-controlleR: Interrupt Router 213 domain created [ 3.070866] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created [ 3.088493] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 [ 3.098392] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 3.105151] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 3.114293] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 [ 3.124440] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 3.131199] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 3.138883] omap8250 2800000.serial: probe begin [ 3.143867] printk: console {ttyS2] disabled [ 3.148257] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 192, base_baud = 3000000) is a 8250 [ 3.157107] printk: console [ttyS2] enabled [ 3.157107] printk: console [ttyS2] enabled [ 3.165554] printk: bootconsole [ns16550a0] disabled [ 3.165554] printk: bootconsole [ns16550a0] disabled [ 3.175904] omap8250 2820000.serial: probe begin [ 3.180726] 2820000.serial: ttyS4 at MMIO 0x2820000 (irq = 193, base_baud = 3000000) is a 8250 [ 3.189603] omap8250 2830000.serial: probe begin [ 3.194416] 2830000.serial: ttyS5 at MMIO 0x2830000 (irq = 194, base_baud = 3000000) is a 8250 [ 3.203255] omap8250 2840000.serial: probe begin [ 3.208039] 2840000.serial: ttyS6 at MMIO 0x2840000 (irq = 195, base_baud = 3000000) is a 8250 [ 3.218455] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 3.227386] mmc0: CQHCI version 5.10 [ 3.231165] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 3.241677] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled [ 3.251839] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 3.262081] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled [ 3.271885] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit [ 3.280476] scsi host0: ufshcd [ 3.406389] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.415848] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.425132] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.434693] scsi 0:0:0:0: Direct-Access SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.442860] mmc0: Command Queue Engine enabled [ 3.447325] mmc0: new high speed MMC card at address 0001 [ 3.453528] mmcblk0: mmc0:0001 DA6064 58.2 GiB [ 3.453558] sd 0:0:0:0: [sda] 61743104 4096-byte logical blocks: (253 GB/236 GiB) [ 3.453646] scsi 0:0:0:1: Direct-Access SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.465558] sd 0:0:0:0: [sda] Write Protect is off [ 3.478482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.480888] mmcblk0: p1 p2 [ 3.487003] sd 0:0:0:0: [sda] Preferred minimum I/O size 524288 bytes [ 3.487008] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 3.489821] sd 0:0:0:1: [sdb] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 3.496630] scsi 0:0:0:2: Direct-Access SAMSUNG KLUEGAJ1ZD-C0CQ 5900 PQ: 0 ANSI: 6 [ 3.502361] sd 0:0:0:1: [sdb] Write Protect is off [ 3.522764] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.522830] mmcblk0boot0: mmc0:0001 DA6064 4.00 MiB [ 3.527424] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.533059] mmcblk0boot1: mmc0:0001 DA6064 4.00 MiB [ 3.540884] sd 0:0:0:1: [sdb] Preferred minimum I/O size 524288 bytes [ 3.546429] mmcblk0rpmb: mmc0:0001 DA6064 4.00 MiB, chardev (240:0) [ 3.552268] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes [ 3.559460] sd 0:0:0:2: [sdc] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB) [ 3.571851] sd 0:0:0:2: [sdc] Write Protect is off [ 3.576783] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 3.585336] sd 0:0:0:2: [sdc] Preferred minimum I/O size 524288 bytes [ 3.585355] sd 0:0:0:1: [sdb] Attached SCSI disk [ 3.591786] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes [ 3.603299] sd 0:0:0:2: [sdc] Attached SCSI disk [ 4.000667] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 4.007505] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 4.014304] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 4.021107] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 4.027875] omap-mailbox 1f84000.mailbox: omap mailbox rev 0x66fc7100 [ 4.034542] hardware-id Pylon-hardware-ID: Board HWID value is 7 [ 4.048680] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) [ 4.059433] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) [ 4.070808] omap8250 2810000.serial: probe begin [ 4.075459] gnss rst on [ 4.077904] gnss pwren on [ 4.080517] gnss en3v3 on [ 4.083133] gnss en5v on [ 4.085972] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 794, base_baud = 3000000) is a 8250 [ 4.098131] spi-nor spi0.0: gd25lx256e (32768 Kbytes) [ 4.103225] 7 fixed-partitions partitions found on MTD device 47040000.spi.0 [ 4.110263] Creating 7 MTD partitions on "47040000.spi.0": [ 4.115735] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 4.121773] 0x000000080000-0x000000280000 : "ospi.tispl" [ 4.127513] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 4.133374] 0x000000680000-0x0000006a0000 : "ospi.env" [ 4.138944] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" [ 4.145161] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" [ 4.150892] 0x000001fe0000-0x000002000000 : "ospi.phypattern" [ 5.493594] davinci_mdio c000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 5.501377] mdio_bus c000f00.mdio: MDIO device at address 5 is missing. [ 5.508190] mdio_bus c000f00.mdio: MDIO device at address 15 is missing. [ 5.514899] am65-cpsw-nuss c000000.ethernet: initializing am65 cpsw nuss version 0x6BA01901, cpsw version 0x6BA80101 Ports: 9 quirks:00000000 [ 5.528798] am65-cpsw-nuss c000000.ethernet: Use random MAC address [ 5.535503] am65-cpsw-nuss c000000.ethernet: Use random MAC address [ 5.541837] am65-cpsw-nuss c000000.ethernet: Use random MAC address [ 5.548097] am65-cpsw-nuss c000000.ethernet: initialized cpsw ale version 1.4 [ 5.555218] am65-cpsw-nuss c000000.ethernet: ALE Table size 512 [ 5.561570] am65-cpsw-nuss c000000.ethernet: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 5.573085] am65-cpsw-nuss c000000.ethernet: set new flow-id-base 140 [ 5.582460] mmc1: CQHCI version 5.10 [ 5.589284] pinctrl-single 11c000.pinctrl: Invalid number of rows: 0 [ 5.595659] pinctrl-single 11c000.pinctrl: no pins entries for sw10-button-pins-default [ 5.612409] ALSA device list: [ 5.615378] No soundcards found. [ 5.624188] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit [ 5.631910] Waiting for root device PARTUuID=faf4c751-02... [ 5.672385] mmc1: new high speed SDHC card at address aaaa [ 5.678301] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 5.687310] mmcblk1: p1 p2 [ 6.178626] EXT4-fs (mmcblk1p2): recovery complete [ 6.184511] EXT4-fs (mmcblk1p2):mounted filesystem with ordered data mode. Quota mode: none. [ 6.193063] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 6.202681] devtmpfs: mounted [ 6.206682] Freeing unused kernel memory: 1984K [ 6.211314] Run /sbin/init as init process [ 6.615161] systemd[1]: System time before build time, advancing clock. [ 6.693139] NET: Registered PF_INET6 protocol family [ 6.698749] Segment Routing with IPv6 [ 6.702427] In-situ OAM (IOAM) with IPv6 [ 6.744525] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIb +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 6.775966] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 6.836431] systemd[1]: Hostname set to . [ 6.934178] systemd-sysv-generator[148]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please*[ 7.128840] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 7.176140] systemd[1]: /etc/syStemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 7.231565] systemd[1]: Queued start job for default target Graphical Interface. [ 7.272212] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 7.295257] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 7.319048] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 7.342696] systemd[1]: Created slice User and Session Slice. [ Ok ] Created slice User and Session Slice. [ 7.365815] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ¡­ts to Console Directory Watch. [ 7.389726] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R¡­uests to Wall Directory Watch. [ 7.413782] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 7.429649] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 7.449646] systemd[1]: Reached target Slice Units. [ OK ] Reached target ;[0;1;39mSlice Units. [ 7.465651] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 7.520317] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbinD Server Activation Socket. [ 7.541739] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 7.566818] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 7.589834] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 7.614008] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 7.633870] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.653908] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.669983] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 7.693948] systemd[]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.713830] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.733855] systemD[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 7.773939] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 7.72316] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.830051] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... { 7.849871] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 7.868271] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 7.892907] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 7.916370] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 7.940370] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 7.964386] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 7.996379] fuse: init (API version 7.37) [ 8.018201] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 8.053180] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 8.102106] systemd[1]: Starting data call... Starting data call... [ 8.121771] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 8.138066] systemd[1]: Starting Journal Service... Starting Journal Service... [ 8.202236] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 8.220895] systemd[1]: Starting Generate network units from Kernel command line... [ 8.228845] cryptodev: loading out-of-tree module taints kernel. Starting Generate network ¡­ts from Kernel command line... [ 8.244253] cryptodev: driver 1.12 loaded. [ 8.252715] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 8.277105] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 8.302477] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 8.334306] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 8.354163] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug FilE System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details.- [DEPEND] Dependency failed for Star¡­progress communication helper. [ OK ] Finished Load Kernel Modules. . [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 8.688938] systemd-journald[165]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... [ 8.892041] audit: type=1334 audit(1651167747.276:2): prog-id=5 op=LOAD [ 8.898967] audit: type=1334 audit(1651167747.284:3): prog-id=6 op=LOAD Starting Rule-based Manage¡­for Device Events and Files... [ OK ] Finished Coldplug All udev Devices. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. * Starting Record System Boot/Shutdown in UTMP... [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ 9.319939] random: crng init done [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Reached target System Initializatio[ 9.381010] j721e-pcie-host 2900000.pcie: host bridge /bus@100000/pcie@2900000 ranges: n. [ OK ] Started Daily rotation of log files[ 9.408655] j721e-pcie-host 2900000.pcie: IO 0x0010001000..0x0010010fff -> 0x0010001000 . [ 9.418025] j721e-pcie-host 2900000.pcie: MEM 0x0010011000..0x0017ffffff -> 0x0010011000 [ 9.47459] j721e-pcie-host 2900000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 [ OK ] Started Daily Cleanup of Temporary [ 9.441088] mc: Linux media interface: v0.10 Directories. [ 9.448857] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node vision-apps-c66-dma-memory@a9000000 [ OK ] Reached target Timer Units. [ 9.462449] k3-dsp-rproc 4d80800000.dsp: configured DSP for IPC-only mode [ OK ] Listening on Avahi mDNS/DNS-SD Stac[ 9.474918] remoteproc remoteproc0: 4d80800000.dsp is available k Activation Socket. [ 9.483894] remoteproc remoteproc0: attaching to 4d80800000.dsp [ 9.493968] k3-dsp-rproc 4d80800000.dsp: DSP initialized in IPC-only mode [ 9.500832] rproc-virtio rproc-virtio.10.auto: assigned reserved memory node vision-apps-c66-dma-memory@a9000000 [ 9.512012] virtio_rpmsg_bus virtio0: rpmsg host is online [ 9.517543] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 9.517854] rproc-virtio rproc-virtio.10.auto: registered virtio0 (type 7) [ 9.531478] remoteproc remoteproc0: remote processor 4d80800000.dsp is now attached [ OK ] Listening on D-Bus System Message B[ 9.539302] k3-dsp-rproc 4d80800000.dsp: register pm nitifiers in remoteproc mode us Socket.[ 9.553198] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node vision-apps-c66-dma-memory@a8000000 [ 9.564379] k3-dsp-rproc 4d81800000.dsp: configured DSP for IPC-only mode [ 9.574072] videodev: Linux video capture interface: v2.00 Starting Docker Socket for the API...[ 9.582544] remoteproc remoteproc1: 4d81800000.dsp is available [ OK ] Listening on dropbear.socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. [ 9.639991] remoteproc remoteproc1: attaching to 4d81800000.dsp Starting Weston socket... [ 9.659167] k3-dsp-rproc 4d81800000.dsp: DSP initialized in IPC-only mode [FAILED] Failed to start D-Bus System Message Bus. [ 9.679973] img_enc 4200000.video-encoder: vxe_enc_probe: using heap 1 for internal alloc See 'systemctl status dbus-broker.service' for details. Starting Reboot and dump vmcore via kexec... [ 9.708588] rproc-virtio rproc-virtio.13.auto: assigned reserved memory node vision-apps-c66-dma-memory@a8000000 [ OK ] Finished Load/Save Random Seed.[ 9.728278] virtio_rpmsg_bus virtio1: rpmsg host is online [ 9.732126] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 9.734352] rproc-virtio rproc-virtio.13.auto: registered virtio1 (type 7) [ 9.748131] remoteproc remoteproc1: remote processor 4d81800000.dsp is now attached [ 9.755878] k3-dsp-rproc 4d81800000.dsp: register pm nitifiers in remoteproc mode [ OK ] Listening on Docker Socket for the [ 9.766020] img_dec 4300000.video-decoder: decoder registered as /dev/video0 API. [ 9.768659] img_enc 4200000.video-encoder: encoder registered as /dev/video1 [ OK ] Listening on Weston socket. [ 9.794521] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 [ OK ] Found device /dev/ttyS2. [ OK ] Finished Reboot and dump vmcore via kexec. *[ 9.851196] at24 0-0057: 16384 byte 24c128 EEPROM, writable, 64 bytes/write [ 9.858390] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ OK ] Reached target 9mBasic System. [ 9.877442] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ OK ] Started Job spooling tools. [ 9.926014] remoteproc remoteproc2: 64800000.dsp is available [ OK ] Started 0;1;39mPeriodic Command Scheduler. [ 9.949607] platform 41000000.r5f: configured R5F for IPC-only mode Starting DEMO...[ 9.962846] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 - [ 9.963003] remoteproc remoteproc2: attaching to 64800000.dsp [ 9.983893] remoteproc remoteproc3: 41000000.r5f is available Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering FramEwork remoteproc remoteproc3: attaching to 41000000.r5f [0m... Starting IPv4 Packet Filtering Framework... [ 10.022940] platform 41000000.r5f: R5F core initialized in IPC-only mode [ OK ] Started irqbalance daemon. [ 10.031966] rproc-virtio rproc-virtio.14.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 Starting Telephony service... Starting Update pmic regis¡­fety feature on power rails... Starting Expand the rootfs¡­ll size of the boot device.... [ OK ] Started strongSwan IPsec I¡­IKEv2 daemon using ipsec.conf. [ 10.089958] audit: type=1334 audit(1651167748.476:4): prog-id=7 op=LOAD [FAILED] Failed to start User Login Manage[ 10.097874] audit: type=1334 audit(1651167748.476:5): prog-id=8 op=LOAD ment. See 'systemctl status systemd-logind.service' for details. [ OK ] Stopped Network Time Synchronization. [FAILED] Failed to start Network Time Synchronization. See 'systemctl status systemd-timesyncd.service' for details. [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Update pmic regis¡­safety feature on power rails. [ [ 10.176077] virtio_rpmsg_bus virtio2: rpmsg host is online OK ] Finished Telnet Server. [ OK ] Reached target Preparation for Network. [ 10.193628] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd 2m OK ] Stopped User Login Management. Starting Load Kernel Module drm... St[ 10.209923] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe [ 10.213882] remoteproc remoteproc2: unsupported resource 65538 arting Network Configuration... [ OK [ 10.228941] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode ] Stopped Network Time Synchronization. [[ 10.240482] rproc-virtio rproc-virtio.15.auto: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 FAILED] Failed to start Network Time Synchronizatio[ 10.256079] audit: type=1334 audit(1651167748.628:6): prog-id=9 op=LOAD n. See 'systemctl status systemd-timesyncd.service' for det[ 10.268252] audit: type=1334 audit(1651167748.644:7): prog-id=10 op=LOAD ails. [ OK ] Finished Load Kernel Module [ 10.280541] audit: type=1334 audit(1651167748.644:8): prog-id=7 op=UNLOAD drm. [FAILED] Failed to start User Lo[ 10.283728] virtio_rpmsg_bus virtio3: rpmsg host is online [ 10.292751] audit: type=1334 audit(1651167748.644:9): prog-id=8 op=UNLOAD gin Management. See 'systemctl status systemd-logind.servic[ 10.303711] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd e' for details. [ OK ] Stopped User Login Management. Starting Load Kernel Module drm... [ OK ] Finished Load Kernel Mo[ 10.336351] audit: type=1334 audit(1651167748.720:10): prog-id=11 op=LOAD dule drm. [ 10.347276] audit: type=1334 audit(1651167748.732:11): prog-id=12 oP=LOAD [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [ OK ] Stopped User Login Management. Starting Load Kernel Module drm... [ 10.387040] rproc-virtio rproc-virtio.14.auto: registered virtio2 (type 7) [ 10.394031] remoteproc remoteproc3: remote processor 41000000.r5f is now attached [ OK ] Finished Load Kernel Module drm. [ 10.409839]platform 41400000.r5f: configured R5F for remoteproc mode [ 10.418147] rproc-virtio rproc-virtio.15.auto: registered virtio3 (type 7) [FAILED] Failed to start User Login Manage[ 10.425318] remoteproc remoteproc2: remote processor 64800000.dsp is now attached ment. See 'systemctl status systemd-logind.service' for det[ 10.438436] k3-dsp-rproc 64800000.dsp: register pm nitifiers in remoteproc mode ails. [ OK ] Stopped User Login Management. Starting Load Kernel Module drm... [ OK ] Finished Load Kernel Module drm. [FAILED] Failed to start User Login Management. *[ OK ] Stopped User Login Management.vice' for details. [FAILED] Failed to start Load Kernel Module drm. See 'systemctl status modprobe@drm.service' for details. [FAILED] Failed to start User LogiN Management. See 'systemctl status systemd-logind.service' for details. [ 10.550680] platform 41400000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a1000000 [ 10.604633] remoteproc remoteproc4: 41400000.r5f is available [ 10.612818] remoteproc remoteproc4: Direct firmware load for j7-mcu-r5f0_1-fw failed with error -2 [ OK ] Started DEMO.[ 10.622143] remoteproc remoteproc4: powering up 41400000.r5f [ 10.631649] remoteproc remoteproc4: Direct firmware load for j7-mcu-r5f0_1-fw failed with error -2 [ 10.645763] remoteproc remoteproc4: request_firmware failed: -2 [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus-broker.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus-broker.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus-broker.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus-broker.service' for details. [FAILED] Failed to start D-Bus System Message Bus. See 'systemctl status dbus-broker.service' for details. [ OK ] Started Telephony service. [ 10.807293] cfg80211: Loading compiled-in X.509 certificates for regulatory database *[ 10.853398] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 10.881623] j721e-pcie-host 2900000.pcie: Link up [ 10.887067] j721e-pcie-host 2900000.pcie: PCI host bridge to bus 0000:00 [ 10.903929] pci_bus 0000:00:root bus resource [bus 00-ff] [ 10.909569] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x10001000-0x10010fff]) [ 10.957358] pci_bus 0000:00: root bus resource [mem 0x10011000-0x17ffffff] [ 10.966678] pci 0000:00:00.0: [104c:b00d] type 01 class 0x060400 [ 10.977347] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits [ 10.987713] pci 0000:00:00.0: supports D1 [ 10.991979] pci 0000:00:00.0: PME# supported from D0 D1 D3hot { 11.005927] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 11.014494] pci 0000:01:00.0: [14e4:a00d] type 00 class 0x020000 [ 11.022019] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit] [ 11.029813] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x0001ffff 64bit] [ 11.038823] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x0000ffff 64bit] [ 11.060682] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 11.069649] pci 0000:01:00.0: reg 0x1dc: [mem 0x00000000-0x0001ffff 64bit] [ 11.087782] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000dffff 64bit] (contains BAR0 for 7 VFs) [ 11.098956] pci 0000:01:00.0: reg 0x1e4: [mem 0x00000000-0x0001ffff 64bit] [ 11.108517] pci 0000:01:00.0: vF(n) BAR2 space: [mem 0x00000000-0x000dffff 64bit] (contains BAR2 for 7 VFs) [ 11.119533] pci 0000:01:00.0: reg 0x1ec: [mem 0x00000000-0x0000ffff 64bit] [ 11.127692] pci 0000:01:00.0: VF(n) BAR4 space: [mem 0x00000000-0x0006ffff 64bit] (contains BAR for 7 VFs) [ 11.138027] pci 0000:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.753 Gb/s with 16.0 GT/s PCIe x1 link) [ OK ] Finished Expand the rootfs¡­full size of the boot device.. [ OK ] Started Network Configuration. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetoo[ 11.430780] am65-cpsw-nuss c000000.ethernet eth1: configuring for fixed/rgmii-rxid link mode th stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ 11.469812] am65-cpsw-nuss c000000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Starting Simple Network Ma¡­ent Protocol (SNMP) Daemon.... Starting permit User Sessio[ 11.494175] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ns... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ OK ] Stopped Network Name Resolution. {FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start NetWork Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ Ok ] Stopped Network Name Resolution. [FAILED] Failed to start Network Name Resolution. See 'systemctl status systemd-resolved.service' for details. [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks...- Starting Weston, a Wayland¡­ositor, as a system service... [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ 11.722684] msm_ipc_routeR_init-Enter- [ 11.737934] NET: Registered PF_IB protocol family [ 11.744013] msm_ipc_router_init-Exit- [ 11.750736] ipc_router_mhi_xprt_probe--Enter-- [ 11.759558] ipc_router_mhi_xprt_probe--Exit-- [ 11.791115] cnss: cssr_timeout is (12000)ms, cssr_enable is (0),ssr_period is (4000) ms [ 11.807254] cnss: Platform driver probed successfully. [ 11.818257] diagchar initializing .. [ 11.823213] diagchar initialized now [ 11.823413] diag_mhi_probe start [ 11.847952] diag: mhi device is ready [FAILED] Failed to start Avahi mDNS/DNS-SD Stack. See 'systemctl status avahi-daemon.service' for details. [ 12.297648] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 12.304300] pci 0000:00:00.0: BAR 14: assigned [mem 0x10100000-0x103fffff] [ 12.311244] pci 0000:01:00.0: BAR 0: assigned [mem 0x10100000-0x1011ffff 64bit] [ 12.318595] pci 0000:01:00.0: BAR 2: assigned [mem 0x10120000-0x1013ffff 64bit] [ 12.326360] pci 0000:01:00.0: BAR 7: assigned [mem 0x10140000-0x1021ffff 64bit] [ 12.333736] pci 0000:01:00.0: BAR 9: assigned [mem 0x10220000-0x102fffff 64bit] [ 12.341062] pci 0000:01:00.0: BAR 4: assigned [mem 0x10300000-0x1030ffff 64bit] [ 12.348925] pci 0000:01:00.0: BAR 11: assigned [mem 0x10310000-0x1037ffff 64bit] [ 12.356392] pci 0000:00:00.0: PCI bridge to [bus 01] [ 12.361392] pci 0000:00:00.0: bridge window [mem 0x10100000-0x103fffff] [ 12.368609] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 12.374989] pcieport 0000:00:00.0: PME: Signaling with IRQ 821 [ 12.383271] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 12.385656] pcieport 0000:00:00.0: AER: enabled with IRQ 821 [ 12.396619] j721e-pcie-host 2910000.pcie: host bridge /bus@100000/pcie@2910000 ranges: [ 12.404643] j721e-pcie-host 2910000.pcie: IO 0x0018001000..0x0018010fff -> 0x0018001000 [ 12.413228] j721e-pcie-host 2910000.pcie: MEM 0x0018011000..0x001fffffff -> 0x0018011000 [ 12.421965] j721e-pcie-host 2910000.pcie: IB MEM 0x0000000000..0xffffffffffff -> 0x0000000000 [ OK ] Created slice Slice /system/systemd-fsck. Starting User Database Manager... [ OK ] Found device KLUEGAJ1Zd-C0CQ. Starting File System Check on /dev/sda... [ OK ] Found device /dev/mmcblk0p2. Starting File System Check on /dev/mmcblk0p2... [ OK ] Found device /dev/mmcblk0p1.[ 12.649773] k3_r5_rproc bus@100000:bus@28380000:r5fss@41000000: Timed out waiting for 41400000.r5f core to power up! Starting File System Check on /dev/mmcblk0p1 12.666259] platform 5c00000.r5f: configured R5F for IPC-only mode 0m... [ 12.673137] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 12.684432] remoteproc remoteproc5: 5c00000.r5f is available [ 12.692240] remoteproc remoteproc5: attaching to 5c00000.r5f [ OK ] Started User Database Manager.[ 12.699266] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 12.710682] rproc-virtio rproc-virtio.16.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 12.722262] virtio_rpmsg_bus virtio4: rpmsg host is online [ 12.728749] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd [ 12.730514] rproc-virtio rproc-virtio.16.auto: registered virtio4 (type 7) [ 12.742813] remoteproc remoteproc5: remote processor 5c00000.r5f is now attached [ 12.750963] platform 5d00000.r5f: configured R5F for IPC-only mode [ 12.758013] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000 [ 12.768262] remoteproc remoteproc6: 5d00000.r5f is available [ 12.774010] remoteproc remoteproc6: attaching to 5d00000.r5f [ 12.779783] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 12.786420] remoteproc remoteproc6: remote processor 5d00000.r5f is now attached [ 12.795736] platform 5e00000.r5f: configured R5F for IPC-only mode [ 12.802777] platform 5e00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000 [ 12.813997] remoteproc remoteproc8: b034000.pru is available [ 12.820079] remoteproc remoteproc7: 5e00000.r5f is available [ 12.821315] remoteproc remoteproc9: b004000.rtu is available [ 12.827500] remoteproc remoteproc7: attaching to 5e00000.r5f [ 12.833320] remoteproc remoteproc10: b00a000.txpru is available [ 12.841035] platform 5e00000.r5f: R5F core initialized in IPC-only mode [ 12.844463] remoteproc remoteproc11: b038000.pru is available [ 12.851166] rproc-virtio rproc-virtio.17.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a600000 [ 12.856656] remoteproc remoteproc12: b006000.rtu is available [ 12.870375] virtio_rpmsg_bus virtio5: rpmsg host is online [ 12.872859] remoteproc remoteproc13: b00c000.txpru is available [ 12.877365] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xd [ 12.883657] remoteproc remoteproc14: b134000.pru is available [ 12.898647] rproc-virtio rproc-virtio.17.auto: registered virtio5 (type 7) [ 12.906133] remoteproc remoteproc7: remote processor 5e00000.r5f is now attached- [ 12.909310] remoteproc remoteproc15: b104000.rtu is available [ 12.920596] platform 5f00000.r5f: configured R5F for IPC-only mode [ 12.921161] remoteproc remoteproc17: b10a000.txpru is available [ 12.927629] platform 5f00000.r5f: assigned resErved memory node vision-apps-r5f-dma-memory@a7000000 [ 12.936034] remoteproc remoteproc18: b138000.pru is available [ 12.943321] remoteproc remoteproc16: 5f00000.r5f is available [ 12.950556] remoteproc remoteproc19: b106000.rtu is available [ 12.953969] remoteproc remoteproc16: attaching to 5f00000.r5f [ 12.966373] platform 5f00000.r5f: R5F core initialized in IPC-only mode [ 12.968957] remoteproc remoteproc20: b10c000.txpru is available [ 12.974754] rproc-virtio rproc-virtio.18.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000 [ 12.992114] virtio_rpmsg_bus virtio6: rpmsg host is online [ 12.999031] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xd [ 12.999424] rproc-virtio rproc-virtio.18.auto: registered virtio6 (type 7) [ 13.014355] remoteproc remoteproc16: remote processor 5f00000.r5f is now attached [ OK ] Listening on Load/Save RF ¡­itch Status /dev/rfkill Watch. [ OK ] Finished File System Check on /dev/mmcblk0p1. Mounting /run/media/BOOT-mmcblk0p1... [ OK ] Mounted /run/media/BOOT-mmcblk0p1. [ OK ] Finished File System Check on /dev/mmcblk0p2. Mounting /run/media/rootfs-mmcblk0p2... [ OK ] Finished File System Check on /dev/sda. Mounting /run/media/sda... [ 13.425978] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 13.429081] EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none. [ OK ] Mounted /run/media/rootfs-mmcblk0p2. [ OK ] Mounted /run/media/sda. [ OK ] Reached target Hardware activated USB gadget. [ 13.918992] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller [ 13.926854] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 1 [ 13.935843] xhci-hcd xhci-hcd.19.Auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000018010 [FAILED] Failed to start Weston, a ¡­mpos[ 13.947134] xhci-hcd xhci-hcd.19.auto: irq 845, io mem 0x06410000 itor, as a system service. See 'systemctl status weston.ser[ 13.957456] xhci-hcd xhci-hcd.19.auto: xHCI Host Controller vice' for details. [ 13.968327] xhci-hcd xhci-hcd.19.auto: new USB bus registered, assigned bus number 2 [ 13.977707] xhci-hcd xhci-hcd.19.auto: Host supports USB 3.0 SuperSpeed [ 13.984877] hub 1-0:1.0: USB hub found [ 13.988723] hub 1-0:1.0: 1 port detected [ 13.992947] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 14.002037] hub 2-0:1.0: USB hub found [ 14.005839] hub 2-0:10: 1 port detected Starting Save/Restore Sound Card State... [ OK ] Finished Save/Restore Sound Card State. [ OK ] Reached target Sound Card. [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/BOOT-mmcblk1p1... [ OK ] Mounted /run/media/BOOT-mmcblk1p1. [ OK ] Started Simple Network Man¡­ement Protocol (SNMP) Daemon.. [ OK ] Started containerd container runtime. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| - Arago Project j721e-evm - Arago 2023.10 j721e-evm - j721e-evm login: [ 17.647144] j721e-pcie-host 2910000.pcie: Link up [ 17.654095] j721e-pcie-host 2910000.pcie: PCI host bridge to bus 0001:00 [ 17.660806] pci_bus 0001:00: root bus resourcE [bus 00-ff] [ 17.666292] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x18001000-0x18010fff]) [ 17.675944] pci_bus 0001:00: root bus resource [mem 0x18011000-0x1fffffff] [ 17.682840] pci 0001:00:00.0: [104c:b00d] type 01 class 0x060400 [ 17.688838] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits [ 17.698568] pci 0001:00:00.0: supports D1 [ 17.702576] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 17.710830] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 17.719010] pci 0001:01:00.0: [17cb:1103] type 00 class 0x028000 [ 17.725060] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 17.732042] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 18.861667] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 [ 18.868355] pci 0001:00:00.0: BAR 14: assigned [mem 0x18200000-0x183fffff] [ 18.875230] pci 0001:01:00.0: BAR 0: assigned [mem 0x1820000-0x183fffff 64bit] [ 18.883035] pci 0001:00:00.0: PCI bridge to [bus 01] [ 18.888039] pci 0001:00:00.0: bridge window [mem 0x18200000-0x183fffff] [ 18.895123] pcieport 0001:00:00.0: enabling device (0000 -> 0002) [ 18.901458] pcieport 0001:00:00.0: PME: Signaling with IRQ 849 [ 18.908026] pcieport 0001:00:00.0: AER: enabled with IRQ 849 [ 18.914633] cnss: PCI is probing, vendor ID: 0x17cb, device ID: 0x1103 [ 18.921547] cnss2 bus@100000:qcom,cnss-qca-converged: for wlan segments only will be dumped. [ 18.932314] cnss_pci 0001:01:00.0: BAR 0: assigned [mem 0x18200000-0x183fffff 64bit] [ 18.940173] cnss_pci 0001:01:00.0: enabling device (0000 -> 0002) [ 18.946452] cnss: Current L1SS status: 0x0 [ 18.946458] cnss: Current ASPm status: 0x0 [ 18.951185] cnss: MSI base data is 0 [ 18.958888] single_msi 0 [ 18.961949] diag: In mhi_notifier, invalid cb reason 0x6 [ 18.967289] diag: In mhi_notifier, invalid cb reason 0x6 [ 18.972599] IPC_RTR: ipc_router_mhi_xprt_cb: Invalid cb reason 6 [ 18.978608] IPC_RTR: ipc_router_mhi_xprt_cb: Invalid cb reason 6 [ 19.424213] <-- xgbe_mod_init 1180 [ 19.427656] =============xgbe_mod_init1182============= [ 19.433114] brcm-xgbe-SC3-pf 0000:01:00.0: enabling device (0000 -> 0002) [ 19.439990] brcm-xgbe-SC3-pf 0000:01:00.0: xgmac ioremap done [ 19.447705] brcm-xgbe-SC3-pf 0000:01:00.0: multi MSI/MSI-X enablement passed IRQ Count=11 [ 19.460268] brcm-xgbe-SC3-pf 0000:01:00.0 eth3: net device enabled [ 19.467225] brcm-xgbe-SC3-pf 0000:01:00.0: xgbe_config_netdev done [ 19.473580] <-- xgbe_mod_init xgbe_pci_init ret 0 [ 20.551254] wlan: Loading driver v5.2.1.98X; cld:I82ed30107f; cmn:I82ed30107f; dev:wlan [ 20.559860] cnss: Posting event: REGISTER_DRIVER(7)-sync, state: 0x0 flags: 0x3 [ 20.567216] cnss: Processing driver event: REGISTER_DRIVER-sync(7), state: 0x0 [ 20.574457] [mhi_enable_ltssm] PCIE_PCIE_PARF_LTSSM 0x111 [ 20.580094] [bhi_probe] jtagid:0x26a0e1 [ 20.819128] [bhi_probe] fw: qca6490/amss.bin size 5378048 [ 20.833176] patch-1: clear rx-vec, bhi_base as 0x0000000000000000 [ 21.604850] cnss: Posting event: SERVER_ARRIVE(0), state: 0x10 flags: 0x0 [ 21.617744] cnss: Processing driver event: SERVER_ARRIVE(0), state: 0x10 [ 21.627918] cnss: QMI WLFW service connected, state: 0x11 [ 21.637216] cnss: Posting event: REQUEST_MEM(2), state: 0x11 flags: 0x0 [ 21.646893] cnss: Processing driver event: REQUEST_MEM(2), state: 0x11 [ 21.665863] cnss: Memory for FW, va: 0x0000000060611acf, pa: 0x0000000092800000, size: 0x660000, type: 1 [ 21.681051] cnss: Memory for FW, va: 0x0000000090ad2306, pa: 0x0000000093000000, size: 0x454000, type: 4 [ 21.696667] cnss: Memory for FW, va: 0x000000007f36b6ff, pa: 0x0000000090144000, size: 0x4000, type: 10 [ 21.713689] cnss: Posting event: FW_MEM_READY(3), state: 0x11 flags: 0x0 [ 21.721487] cnss: Processing driver event: FW_MEM_READY(3), state: 0x11 [ 21.735068] cnss: Target capability: chip_id: 0x2, chip_family: 0xb, board_id: 0xff, soc_id: 0x400c0210, fw_version: 0x114803a1, fw_build_timestamp: 2024-04-16 10:07 [ 21.740562] cnss: Downloading BDF: qca6490/bdwlan.elf, type BDF_ELF size: 59844 [ 21.796420] cnss: Downloading BDF: qca6490/regdb.bin, type BDF_REGDB size: 24278- [ 21.827103] cnss: M3 memory, va: 0x000000006689df2b, pa: 0x0000000090d80000, size: 0x411bc [ 21.837047] cnss: Posting event: FW_READY(4), state: 0x13 flags: 0x0 [ 21.843795] cnss: Processing driver event: FW_READY(4), state: 0x13 [ 21.886344]cnss: Mode: 0, config: 00000000fda119ec, host_version: 5.2.1.98X [ 21.895403] cnss: Sending mode message, mode: MISSION(0), state: 0x17 [ 21.925777] wlan_pld:pld_is_ipa_offload_disabled:2796:: Not supported on type 0 [ 21.933283] [kworke][0x14c9371][17:42:40.322591] wlan: [9:E:POLICY_MGR] policy_mgr_init_cfg: max_conc_cxns 3 non-nan [ 21.944714] [kworke][0x14cc017][17:42:40.334021] wlan: [9:E:QDF] __cds_get_context: Module ID 66 context is Null (via hdd_update_ol_config) ***************************************************************[ 21.962193] [kworke][0x14d045f][17:42:40.351502] wlan: [9:E:QDF] __cds_get_context: Module ID 66 context is Null (via cds_open) NOTICE: This file system contains the following GPL-3.0 packag[ 21.981001] [kworke][0x14d4db5][17:42:40.370276] wlan: [9:I:WMA] wma_open: WMA --> wmi_unified_attach - success es: adwaita-icon-theme-symbolic [ 21.996898] [kworke][0x14d8bea][17:42:40.386200] wlan: [9:E:QDF] htc_wait_target: Target Ready! TX resource : 1 size:2176, MaxMsgsPerHTCBundle = 1 autoconf bash-dev bash bc binutils cifs-utils coreu[ 22.011748] [kworke][0x14dc5ee][17:42:40.401053] wlan: [9:E:QDF] htc_setup_target_buffer_assignments: SVS Index : 1 TX : 0x100 : alloc:1 tils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc g[ 22.039583] [kworke][0x14e32ac][17:42:40.428891] wlan: [9:I:scan] scm_channel_list_db_init: min_freq 5935 max_freq 7115 Cdb gdbserver gettext glmark2 gnu-config grub-common [ 22.051499] [kworke][0x14e613a][17:42:40.440808] wlan: [9:I:SPECTRAL] wlan_spectral_psoc_open: Spectral feature is disabled grub-editenv grub-efi Gzip hidapi less libasm1 libat[ 22.068741] [kworke][0x14ea490][17:42:40.458046] wlan: [9:I:TXRX] hal_rx_fst base address 0x0000000075cfedb9 omic-dev libatomic1 libbfd libdebuginfod1 libdw1 libeigen-dev libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 l[ 22.094335] [kworke][0x14f088d][17:42:40.483643] wlan: [106:I:WMA] wma_rx_service_ready_event: Firmware build version : 114803a1 ibgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10[ 22.106330] [kworke][0x14f3768][1:42:40.495638] wlan: [106:I:WMA] wma_rx_service_ready_event: Board id: 0, Board version: 8 0 0 0 1 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-ex[ 22.124441] [kworke][0x14f7e27][17:42:40.513749] wlan: [106:I:WMA] wma_is_dbs_mandatory: MAC0 does not support both bands 2 DBS is mandatory amples libqt5charts-plugins libqt5charts-qmlplugins libqt5[ 22.141691] [kworke][0x14fc18a][17:42:40.531001] wlan: [106:I:WMI] extract_hw_bdf_status: BDF VER is 0, FW and BDF ver check skipped cHarts5 libqt5sensors-plugins libqt5sensors-qmlplugins lib[ 22.159084] [kworke][0x150057b][17:42:40.548394] wlan: [106:E:TIF] get_sar_flag: failed to parse sar flag qt5sensors5 libqt5serialport-examples libqt5serialport-plugi[ 22.174165] [kworke][0x1504061][17:42:40.563472] wlan: [106:E:TIF] init_deinit_populate_dbs_or_sbs_cap_ext2: Extraction of twt capability failed ns libqt5serialport-qmlplugins libqt5serialport5 libqt5svg[ 22.192617] [kworke][0x1508879][17:42:40.581927] wlan: [106:E:TIF] init_deinit_populate_sap_coex_capability: Extraction of sap_coex_chan_pref cap failed -examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg[ 22.211830] [kworke][0x150d386][17:42:40.601140] wlan: [106:I:WMA] wma_is_dbs_mandatory: MAC0 Does not support both bands 2 DBS is mandatory 5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libqt5webchannel-plugins libqt5webchannel-qmlplugins libqt5webchannel5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring2 m4-dev m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qAmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples * qtmultimedia-qmlplugins qtmultimedia qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples Nqtwayland-plugIns qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well ****************** ********************************************* *************************************************************** Profile App:Cdd Ipc Module Start Init!!! CAN Profile App: CDD IPC MCAL Version Info CaN Profile App:--------------[ 22.495126] [kworke][0x1552624][17:42:40.884434] wlan: [40:E:WMI] extract_reg_fcc_rules_tlv: Fcc rules not sent by fw [ 22.505975] [kworke][0x1555087][17:42:40.895285] wlan: [40:E:WMI] extract_reg_fcc_rules_tlv: Fcc rulesnot sent by fw [ 22.516617] [kworke][0x1557a15][17:42:40.905923] wlan: [40:I:WMI] ready_extract_init_status_tlv: ready_extract_init_status_tlv:0 -[ 22.528703] [kworke][0x155a94d][17:42:40.918011] wlan: [40:E:REGULATORY] reg_set_keep_6ghz_sta_cli_connection: pdev reg component is NULL -[ 22.541274] [kworke][0x155da69][17:42:40.930583] wlan: [40:E:REGULATORY] reg_send_scheduler_msg_nb: hlos not initialized [ 22.552183] [kworke][0x1560507][17:42:40.941493] wlan: [40:I:dfs] WLAN_DEBUG_DFS_ALWAYS : wlan_dfs_pdev_obj_create_notification: dfs_bangradar_320_support 0 -[ 22.566246] [kworke][0x1563bf4][17:42:40.955554] wlan: [40:I:SPECTRAL] wlan_spectral_pdev_obj_create_handler: Spectral feature is disabled [ 22.578738] [kworke][0x1566cc2][17:42:40.968048] wlan: [40:I:GREEN_AP] wlan_green_ap_pdev_obj_create_notification: Green AP creation successful, green ap ctx: 0000000033b74c8d, pdev: 000000008bf5f61c -[ 22.597424] [kworke][0x156b5be][17:42:40.986732] wlan: [40:E:CFR] cfr_streamfs_init: Directory create failed -[ 22.607368] [kworke][0x156dc8d][17:42:40.996668] wlan: [40:E:CFR] wlan_cfr_pdev_open: cfr_streamfs_init failed with 16 [ 22.607368] [ 22.619614] [kworke][0x1570c6d][17:42:41.008923] wlan: [40:I:REGULATORY] reg_set_band: set band bitmap: 3 -[ 22.629343] [kworke][0x1573269][17:42:41.018647] wlan: [40:I:HDD] hdd_intersect_igmp_offload_setting: fw cap to handle igmp 1 igmp_offload_enable ini 0 [ 22.643083] [kworke][0x157681a][17:42:41.032392] wlan: [40:I:GREEN_AP] target_if_green_ap_register_egap_event_handler: Set the Enhance Green AP event handler [ 22.657218] [kworke][0x1579f50][17:42:41.046527] wlan: [9:I:WMA] wma_wait_for_ready_event: FW ready event received [ 22.667583] [kworke][0x157c7cf][17:42:41.056893] wlan: [9:i:SPECTRAL] spectral_pdev_open: Spectral feature is disabled -[ 22.678680] [kworke][0x157f327][17:42:41.067989] wlan: [9:I:SPECTRAL] wlan_register_spectral_wmi_ops: Spectral feature is disabled [ 22.690522] [kworke][0x1582169][17:42:41.079831] wlan: {9:I:SYS] Creating periodic timer for OLBC UPDATE CACHE TIMEOUT [ 22.690522] [ 22.702740] [kworke][0x1585124][17:42:41.092050] wlan: [9:I:SPECTRAL] spectral_register_legacy_cb: Spectral feature is disabled [ 22.714557] [kworke][0x1587f4c][17:42:41.103866] wlan: [9:I:DIRECT_BUF_RX] target_if_direct_buf_rx_register_events: DBR Handler Context 1 [ 22.726952] [kworke][0x158afb8][17:42:41.116263] wlan: [9:I:SPECTRAL] wlan_spectral_psoc_enable: Spectral feature is disabled CAN Profile App: Vendo[ 22.761061] [kworke][0x15934f4][17:42:41.150370] wlan: [9:E:fwol] ucfg_fwol_send_get_thermal_stats_cmd: Command Disabled in Ini gThermalStatsTempOffset 5 or not enabled in FW 0 [ 22.776775] [kworke][0x1597257][17:42:41.166085] wlan: [9:E:OSIF] os_if_fwol_get_thermal_stats_req: Failed to send get thermal stats cmd to FW, 4 r[ 22.791134] [kworke][0x159aa6d][17:42:41.180443] wlan: [9:I:HDD] hdd_initialize_mac_address: using default MAC address ID : 44 CAN Profile App: Module ID : 255 CAN Profile App: SW Major Version : 10 CAN Profile App: SW Minor Version : 0 CAN Profile App: SW Patch Version : 1 CAN Profile App:Cdd Ipc Annonce!!! [ 23.081621] [kworke][0x15e191c][17:42:41.470923] wlan: [1254:I:HDD] hdd_psoc_idle_timeout_callback: Psoc idle timeout elapsed; starting psoc shutdown CAN Profile App:Can Module Start Init!!! CAN Profile App: Variant - Pre Compile being used !!! CAN_APP: Successfully Enabled CAN Transceiver MCAN1!!! CAN_APP: Successfully Enabled CAN Transceiver MCAN7!!! CAN_APP: Successfully Enabled CAN Transceiver MCAN9!!! CAN_APP: Successfully Enabled CAN Transceiver MCAN4!!! [ 28.095972] [system][0x1aa9c6f][17:42:46.485278] wlan: [323:E:HDD] hdd_sysfs_bmiss_create: could not create bmiss sysfs file [ 28.191576] [system][0x1ac11e5][17:42:46.580883] wlan: [323:E:HDD] hdd_sysfs_bmiss_create: could not create bmiss sysfs file [ 29.546212] platform can-phy2: deferred probe pending [ 29.551273] platform connector: deferred probe pending [ 29.556402] platform regulator-dp-pwr: deferred probe pending CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance [ 42.956682] kauditd_printk_skb: 15 callbacks suppressed [ 42.956691] audit: type=1006 audit(1651167781.340:25): pid=1314 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1 [ 42.976174] audit: type=1300 audit(1651167781.340:25): arch=c00000b7 syscall=64 success=yes exit=1 a0=3 a1=fffffd553ef8 a2=1 a3=ffffbd5a0020 items=0 ppid=267 pid=1314 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=2 comm="crond" exe="/usr/sbin/crond" key=(null) [ 43.002190] audit: type=1327 audit(1651167781.340:25): proctitle=2F7573722F7362696E2F63726F6E64002D6E CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance [ 45.007658] brcm-xgbe-SC3-pf 0000:01:00.0 eth3: Current addr: 00 aa bb cc dd ee 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.021832] brcm-xgbe-SC3-pf 0000:01:00.0 eth3: Expected addr: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.035980] ------------[ cut here ]------------ [ 45.040589] netdevice: eth3: Incorrect netdev->dev_addr [ 45.045832] WARNING: CPU: 1 PID: 1329 at net/core/dev_addr_lists.c:519 dev_addcheck+0x94/0x140 [ 45.054608] Modules linked in: wlan(O) brcm_xgbe pci_endpoint_test xhci_plat_hcd pru_rproc ti_am335x_adc irq_pruss_intc kfifo_buf omap_rng cdns3 rpmsg_ctrl cdns_usb_common rpmsg_char wlan_cnss_core_pcie(O) overlay display_connector drm_kms_helper crct10dif_ce snd_soc_simple_card syscopyarea snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops phy_can_transceiver cfg80211 rfkill at24 ti_k3_r5_remoteproc k3_j72xx_bandgap vxe_enc vxd_dec videobuf2_dma_sg videobuf2_dma_contig videobUf2_memops ti_am335x_tscadc v4l2_mem2mem videobuf2_v4l2 videobuf2_common pruss videodev snd_soc_davinci_mcasp ti_k3_dsp_remoteproc mc virtio_rpmsg_bus snd_soc_ti_udma rpmsg_ns snd_soc_ti_edma sa2ul ti_k3_common snd_soc_ti_sdma cdns_dphy_rx cdns3_ti pci_j721e_host pci_j721e pcie_cadence_host pcie_cadence rti_wdt optee_rng rng_core spi_omap2_mcspi cryptodev(O) fuse drm drm_panel_orientation_quirks ipv6 [ 45.132550] CPU: 1 PID: 1329 Comm: ifconfig Tainted: G O 6.1.80 #98 [ 45.140187] Hardware name: Texas Instruments J721e EVM (DT) [ 45.145741] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 45.152684] pc : dev_addr_check+0x94/0x140 [ 45.156766] lr : dev_addr_check+0x94/0x140 *[ 45.164147] x29: ffff80000b74bad0 x28: ffff00082c785600 x27: 0000000000000000 [ 45.171265] x26: 0000000000001043 x25: 0000000000000041 x24: 0000000000000000 [ 45.178382] x23: ffff00084f3b0248 x22: 0000000000001002 x21: ffff800001040808 [ 45.18499] x20: ffff00084f3b0000 x19: ffff00084f3b0000 x18: ffffffffffffffff [ 45.192615] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008b74b757 [ 45.199732] x14: 0000000000000000 x13: ffff800009161640 x12: 00000000000008d6 [ 45.206849] x11: 00000000000002f2 x10: ffff8000091b9640 x9 : ffff800009161640 [ 45.213966] x8 : 00000000ffffefff x7 : ffff8000091b9640 x6 : 0000000000000000 [ 45.221082] x5 : ffff00085f9b5b60 x4 : ffff00085f9b5b60 x3 : ffff00085f9b8da0 [ 45.228200] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000829883900 [ 45.235317] Call trace: [ 45.237752] dev_addr_check+0x94/0x140 [ 45.241487] __dev_open+0x44/0x1e0 [ 45.244878] __dev_change_flags+0x198/0x210 [ 45.249046] dev_change_flags+0x24/0x64 [ 45.252866] devinet_ioctl+0x524/0x6ec [ 45.256603] inet_ioctl+0x1e4/0x1f4 [ 45.260076] sock_do_ioctl+0x4c/0x100 [ 45.263725] sock_ioctl+0x244/0x354 [ 45.267201] __arm64_sys_ioctl+0xa8/0xf0 [ 45.271113] invoke_syscall+0x48/0x114 [ 45.274851] el0_svc_common.constprop.0+0xd4/0xfc [ 45.279540] do_el0_svc+0x20/0x30 [ 45.282842] el0_svc+0x28/0xa0 [ 45.285887] el0t_64_sync_handler+0xbc/0x140 [ 45.290144] el0t_64_sync+0x18c/0x190 [ 45.293793] ---[ end trace 0000000000000000 ]--- [ 45.298474] xgbe_open 2040======== [ 45.310167] brcm-xgbe-SC3-pf 0000:01:00.0 eth3: Module parameter FRP mode is Disabled for PF [ 45.324074] brcm-xgbe-SC3-pf 0000:01:00.0 eth3: Loopback mode Disabled [ 46.345725] IPv6: ADDRCONF(NETDeV_CHANGE): eth3: link becomes ready CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:TRansmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance CAN Profile App:NOTE : Operating in interrupt mode! CAN Profile App:Transmit 1 packets 1 times CAN Profile App:Test completed for 4 instance