U-Boot 2019.01-g323d51410c-dirty (Nov 19 2022 - 18:51:55 +0900) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3B DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... OK Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 669 bytes read in 2 ms (326.2 KiB/s) Running bootscript from mmc1 ... ## Executing script at 82000000 Setting bus to 2 4b2ae000: 00000550 P... 4b22e000: 00000550 P... switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 4452864 bytes read in 55 ms (77.2 MiB/s) 132322 bytes read in 3 ms (42.1 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffdc000, end 8ffff4e1 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.94-gbe5389fd85 (root@DS68U-Ubuntu) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Sat Nov 19 09:50:57 JST 2022 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: TI AM5718 IDK [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] OMAP4: Map 0x00000000bfd00000 to (ptrval) for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 202048 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=ec61f70d-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 641876K/815104K available (10240K kernel code, 335K rwdata, 2800K rodata, 2048K init, 268K bss, 25772K reserved, 147456K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (2048 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 336 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 269 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000018] Switching to timer-based delay loop, resolution 162ns [ 0.000293] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000303] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000801] Console: colour dummy device 80x30 [ 0.000845] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000860] pid_max: default: 32768 minimum: 301 [ 0.000982] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000998] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001554] CPU: Testing write buffer coherency: ok [ 0.001591] CPU0: Spectre v2: using ICIALLU workaround [ 0.001813] /cpus/cpu@0 missing clock-frequency property [ 0.001828] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059869] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079877] rcu: Hierarchical SRCU implementation. [ 0.100062] EFI services will not be available. [ 0.119932] smp: Bringing up secondary CPUs ... [ 0.119944] smp: Brought up 1 node, 1 CPU [ 0.119954] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.119963] CPU: All CPU(s) started in HYP mode. [ 0.119970] CPU: Virtualization extensions available. [ 0.120395] devtmpfs: initialized [ 0.150111] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.150401] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.150420] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.152985] pinctrl core: initialized pinctrl subsystem [ 0.153537] DMI not present or invalid. [ 0.153806] NET: Registered protocol family 16 [ 0.160921] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.161837] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.340061] cpuidle: using governor ladder [ 0.340100] cpuidle: using governor menu [ 0.350635] OMAP GPIO hardware version 0.1 [ 0.376506] No ATAGs? [ 0.376552] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.376568] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.377455] OMAP DMA hardware revision 0.0 [ 0.412657] edma 43300000.edma: memcpy is disabled [ 0.416112] edma 43300000.edma: TI EDMA DMA engine driver [ 0.423409] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.427274] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.427461] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.427708] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.427955] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.428329] iommu: Adding device 58820000.ipu to group 1 [ 0.428418] iommu: Adding device 55020000.ipu to group 2 [ 0.428550] iommu: Adding device 40800000.dsp to group 0 [ 0.429863] SCSI subsystem initialized [ 0.431045] palmas 0-0058: Irq flag is 0x00000004 [ 0.463663] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 0.465377] SMPS12: supplied by regulator-dummy [ 0.467094] SMPS3: supplied by VMAIN [ 0.468657] SMPS45: supplied by regulator-dummy [ 0.470488] SMPS6: supplied by VMAIN [ 0.472186] SMPS7: supplied by VMAIN [ 0.474018] SMPS8: supplied by VMAIN [ 0.475273] SMPS9: supplied by VMAIN [ 0.475338] random: fast init done [ 0.476228] LDO1: supplied by VMAIN [ 0.481289] LDO2: supplied by VMAIN [ 0.491149] LDO3: supplied by VMAIN [ 0.501173] LDO4: supplied by VMAIN [ 0.511193] LDO5: supplied by regulator-dummy [ 0.511882] LDO6: supplied by regulator-dummy [ 0.512567] LDO7: supplied by regulator-dummy [ 0.513253] LDO8: supplied by regulator-dummy [ 0.513923] LDO9: supplied by VMAIN [ 0.521506] LDOLN: supplied by VMAIN [ 0.531211] LDOUSB: supplied by VMAIN [ 0.543841] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.544380] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz [ 0.544951] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 0.545511] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 0.546053] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 100 kHz [ 0.546274] media: Linux media interface: v0.10 [ 0.546314] videodev: Linux video capture interface: v2.00 [ 0.546402] pps_core: LinuxPPS API ver. 1 registered [ 0.546412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.546433] PTP clock support registered [ 0.546462] EDAC MC: Ver: 3.0.0 [ 0.551345] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.551530] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.560873] Advanced Linux Sound Architecture Driver Initialized. [ 0.561700] clocksource: Switched to clocksource arch_sys_counter [ 0.570060] NET: Registered protocol family 2 [ 0.570663] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.570879] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.570943] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.571070] TCP: Hash tables configured (established 8192 bind 8192) [ 0.571146] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.571182] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.571315] NET: Registered protocol family 1 [ 0.601810] RPC: Registered named UNIX socket transport module. [ 0.601821] RPC: Registered udp transport module. [ 0.601830] RPC: Registered tcp transport module. [ 0.601839] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.603079] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.604059] Initialise system trusted keyrings [ 0.604221] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.609260] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.619800] NFS: Registering the id_resolver key type [ 0.619824] Key type id_resolver registered [ 0.619834] Key type id_legacy registered [ 0.619878] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.622000] Key type asymmetric registered [ 0.622012] Asymmetric key parser 'x509' registered [ 0.622061] bounce: pool size: 64 pages [ 0.622100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.622111] io scheduler noop registered [ 0.622121] io scheduler deadline registered [ 0.622227] io scheduler cfq registered (default) [ 0.622238] io scheduler mq-deadline registered [ 0.622248] io scheduler kyber registered [ 0.628263] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 0.628420] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.628471] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.628482] pinctrl-single 4a002e8c.pinmux: 1 pins, size 4 [ 0.654031] pwm-backlight backlight: backlight supply power not found, using dummy regulator [ 0.654100] pwm-backlight backlight: Linked as a consumer to regulator.0 [ 0.657207] V3_3D: supplied by smps9 [ 0.657443] vtt_fixed: supplied by V3_3D [ 0.703656] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.707361] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 43, base_baud = 3000000) is a 8250 [ 0.708331] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250 [ 1.684023] console [ttyS2] enabled [ 1.688457] 48422000.serial: ttyS7 at MMIO 0x48422000 (irq = 45, base_baud = 3000000) is a 8250 [ 1.698126] 48424000.serial: ttyS8 at MMIO 0x48424000 (irq = 46, base_baud = 3000000) is a 8250 [ 1.709138] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 1.715553] random: crng init done [ 1.733446] brd: module loaded [ 1.742930] loop: module loaded [ 1.751187] libphy: Fixed MDIO Bus: probed [ 1.758828] i2c /dev entries driver [ 1.768100] cpu cpu0: Linked as a consumer to regulator.4 [ 1.773627] cpu cpu0: Linked as a consumer to regulator.27 [ 1.780827] sdhci: Secure Digital Host Controller Interface driver [ 1.787144] sdhci: Copyright(c) Pierre Ossman [ 1.792916] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.799277] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 1.808134] sdhci-omap 4809c000.mmc: Got CD GPIO [ 1.812970] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.26 [ 1.820001] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.11 [ 1.826886] sdhci-omap 4809c000.mmc: Dropping the link to regulator.11 [ 1.833544] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.2 [ 1.840459] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.11 [ 1.847427] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 1.880709] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 1.889031] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 1.895995] sdhci-omap 480b4000.mmc: Dropping the link to regulator.2 [ 1.902602] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.2 [ 1.934494] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 1.943701] ledtrig-cpu: registered to indicate activity on CPUs [ 1.952104] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.966473] NET: Registered protocol family 10 [ 1.971372] mmc0: new high speed SDHC card at address 5048 [ 1.977164] Segment Routing with IPv6 [ 1.981131] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.987466] NET: Registered protocol family 17 [ 1.992361] mmcblk0: mmc0:5048 ISAOE 28.9 GiB [ 1.997220] Key type dns_resolver registered [ 2.001909] Registering SWP/SWPB emulation handler [ 2.006754] omap_voltage_late_init: Voltage driver support not added [ 2.013246] Power Management for TI OMAP4+ devices. [ 2.018222] mmcblk0: p1 [ 2.021837] Loading compiled-in X.509 certificates [ 2.036678] ti-iodelay 4844a000.padconf: Set reg 0x18c Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.051766] ti-iodelay 4844a000.padconf: Set reg 0x1a4 Delay(a: 119 g: 0), Elements(C=0 F=3)0x29003 [ 2.060857] ti-iodelay 4844a000.padconf: Set reg 0x1b0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.072474] ti-iodelay 4844a000.padconf: Set reg 0x1bc Delay(a: 18 g: 0), Elements(C=0 F=0)0x29000 [ 2.081475] ti-iodelay 4844a000.padconf: Set reg 0x1c8 Delay(a: 894 g: 0), Elements(C=2 F=0)0x29040 [ 2.090594] ti-iodelay 4844a000.padconf: Set reg 0x1d4 Delay(a: 30 g: 0), Elements(C=0 F=0)0x29000 [ 2.099602] ti-iodelay 4844a000.padconf: Set reg 0x1e0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.108521] ti-iodelay 4844a000.padconf: Set reg 0x1ec Delay(a: 23 g: 0), Elements(C=0 F=0)0x29000 [ 2.117528] ti-iodelay 4844a000.padconf: Set reg 0x1f8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.126446] ti-iodelay 4844a000.padconf: Set reg 0x360 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.135365] ti-iodelay 4844a000.padconf: Set reg 0x194 Delay(a: 152 g: 0), Elements(C=0 F=4)0x29004 [ 2.144459] ti-iodelay 4844a000.padconf: Set reg 0x1ac Delay(a: 206 g: 0), Elements(C=0 F=6)0x29006 [ 2.153552] ti-iodelay 4844a000.padconf: Set reg 0x1b8 Delay(a: 78 g: 0), Elements(C=0 F=2)0x29002 [ 2.162558] ti-iodelay 4844a000.padconf: Set reg 0x1c4 Delay(a: 2 g: 0), Elements(C=0 F=0)0x29000 [ 2.171468] ti-iodelay 4844a000.padconf: Set reg 0x1d0 Delay(a: 266 g: 0), Elements(C=0 F=8)0x29008 [ 2.180560] ti-iodelay 4844a000.padconf: Set reg 0x1dc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.189478] ti-iodelay 4844a000.padconf: Set reg 0x1e8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.198395] ti-iodelay 4844a000.padconf: Set reg 0x1f4 Delay(a: 43 g: 0), Elements(C=0 F=1)0x29001 [ 2.207401] ti-iodelay 4844a000.padconf: Set reg 0x200 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.216319] ti-iodelay 4844a000.padconf: Set reg 0x368 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.225237] ti-iodelay 4844a000.padconf: Set reg 0x190 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.234156] ti-iodelay 4844a000.padconf: Set reg 0x1a8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.243074] ti-iodelay 4844a000.padconf: Set reg 0x1b4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.251991] ti-iodelay 4844a000.padconf: Set reg 0x1c0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.260900] ti-iodelay 4844a000.padconf: Set reg 0x1d8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.269818] ti-iodelay 4844a000.padconf: Set reg 0x1e4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.278746] ti-iodelay 4844a000.padconf: Set reg 0x1f0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.287666] ti-iodelay 4844a000.padconf: Set reg 0x1fc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.296584] ti-iodelay 4844a000.padconf: Set reg 0x364 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 2.306674] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.313534] mmc1: new DDR MMC card at address 0001 [ 2.318864] dmm 4e000000.dmm: initialized all PAT entries [ 2.324962] hctosys: unable to open rtc device (rtc0) [ 2.330488] mmcblk1: mmc1:0001 MMC32G 29.1 GiB [ 2.335699] ALSA device list: [ 2.338678] No soundcards found. [ 2.342546] mmcblk1boot0: mmc1:0001 MMC32G partition 1 4.00 MiB [ 2.348939] mmcblk1boot1: mmc1:0001 MMC32G partition 2 4.00 MiB [ 2.355585] mmcblk1rpmb: mmc1:0001 MMC32G partition 3 4.00 MiB, chardev (244:0) [ 2.364102] mmcblk1: p1 p2 [ 2.387433] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.395665] VFS: Mounted root (ext4 filesystem) on device 179:18. [ 2.405479] devtmpfs: mounted [ 2.410131] Freeing unused kernel memory: 2048K [ 2.414795] Run /sbin/init as init process [ 2.543685] systemd[1]: System time before build time, advancing clock. [ 2.573084] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 2.595377] systemd[1]: Detected architecture arm. Welcome to Arago 2019.11! [ 2.632631] systemd[1]: Set hostname to . [ 2.763583] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 2.780829] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.940723] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 2.982166] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 3.014509] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 3.055538] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.092049] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Created slice system-getty.slice. [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on udev Control Socket. [ OK ] Listening on Journal Socket. [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Load Kernel Modules... [ 3.405082] cmemk: loading out-of-tree module taints kernel. [ 3.416053] CMEMK module: reference Linux version 4.19.94 Mounting POSIX Message Queue File System... [ 3.425593] cmemk initialized Starting udev Coldplug all Devices... [ 3.447246] cryptodev: driver 1.9 loaded. Mounting Kernel Debug File System... Starting Remount Root and Kernel File Systems... Mounting Temporary Directory (/tmp)... [ 3.540031] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ 3.590579] usbcore: registered new interface driver usbfs Starting Journal Service... [ 3.615430] usbcore: registered new interface driver hub [ 3.643908] usbcore: registered new device driver usb [ OK ] Reached target Remote File Systems. [ 3.669786] usbcore: registered new interface driver ftdi_sio [ OK ] Mounted POSIX Message Queue File System. [ 3.692008] usbserial: USB Serial support registered for FTDI USB Serial Device [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Load Kernel Modules. Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Started Journal Service. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Mounting /media/ram... [ OK ] Reached target Containers. Starting Flush Journal to Persistent Storage... [ OK ] Started udev Kernel Device Manager. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ 4.262450] systemd-journald[99]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Service... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Service. Starting Network Name Resolution... Starting Wait for Network to be Configured... [ 4.882742] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ 4.890980] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ 5.039825] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@9d000000 [ OK ] Started udev Coldplug all Devices. [ 5.150348] remoteproc remoteproc0: 58820000.ipu is available [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ 5.237246] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ 5.323786] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ OK ] Listening on dropbear.socket. [ 5.365636] remoteproc remoteproc0: powering up 58820000.ipu [ 5.371331] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 6887428 [ OK ] Listening on D-Bus System Message Bus Socket. Starting Reboot and dump vmcore via kexec... [ OK ] Listening on RPCbind Server Activation Socket[ 5.431945] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000 . [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ 5.528258] virtio_rpmsg_bus virtio0: rpmsg host is online [ 5.559645] remoteproc remoteproc1: 55020000.ipu is available [ OK ] Started Periodic Command Scheduler. Starting RPC Bind Service... [ 5.602447] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 5.620809] remoteproc remoteproc0: registered virtio0 (type 7) [ OK ] Started D-Bus System Message Bus. [ 5.723434] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 5.778679] tlv320aic32x4 2-0018: Linked as a consumer to regulator.2 [ 5.796210] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver Starting TI MultiCore Tools Daemon... [ 5.882230] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 5.891286] tlv320aic32x4 2-0018: Linked as a consumer to regulator.12 Starting TI IPC Daemon... [ 5.911376] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@99000000 [ 5.933678] omap-des 480a5000.des: will run requests pump with realtime priority Starting Print notice about GPLv3 packages... [ 5.950010] remoteproc remoteproc1: powering up 55020000.ipu Starting Login Service... [ 6.010215] omap_gpio 48053000.gpio: Could not set line 30 debounce to 20000 microseconds (-22) [ 6.027724] tlv320aic32x4 3-0018: Linked as a consumer to regulator.2 Starting rc.pvr.service... [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started Network Name Resolution. [ 6.071789] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3747220 [ 6.079642] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ OK ] Started Reboot and dump vmcore via kexec. [ OK ] Started RPC Bind Service. [ OK 6.133288] remoteproc remoteproc2: 40800000.dsp is available m] Started TI IPC Daemon. [ 6.141163] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as rtc0 [ 6.156147] tlv320aic32x4 3-0018: Linked as a consumer to regulator.12 [ 6.277719] Driver for 1-wire Dallas network protocol. [ OK ] Found device /dev/ttyS2. [ OK ] Started TI MultiCore Tools Daemon. [ 6.402489] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.gpu on minor 0 [ 6.482002] tlv320aic32x4 4-0018: Linked as a consumer to regulator.2 [ 6.600007] tlv320aic32x4 4-0018: Linked as a consumer to regulator.12 [ 6.621869] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode [ 6.709170] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ] [ 6.782937] remoteproc remoteproc2: powering up 40800000.dsp [ 6.788633] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 20482288 [ 6.874128] omap_rtc 48838000.rtc: registered as rtc1 [ OK ] Started rc.pvr.service. [ 6.968930] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d [ 6.990074] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 6.996020] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 7.032901] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin Starting weston.service... [ OK ] Reached target Network. [ OK ] Started Redis In-Memory Data Store. Starting Enable and configure wl18xx bluetooth stack... [ 7.175683] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered. Starting Permit User Sessions... [ 7.239003] vip 48970000.vip: loading firmware vpdma-1b8.bin [ 7.261911] vpe 489d0000.vpe: Device registered as /dev/video0 Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Reached target Host and Network Name Lookups.[ 7.344550] virtio_rpmsg_bus virtio1: rpmsg host is online [ 7.373065] vip 48970000.vip: VPDMA firmware loaded [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ 7.515767] remoteproc remoteproc1: registered virtio1 (type 7) [ OK ] Started Permit User Sessions. [ 7.646038] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 7.775003] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 7.876954] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ OK ] Started Enable and configure wl18xx bluetooth stack. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ 8.098422] virtio_rpmsg_bus virtio2: rpmsg host is online [ 8.159039] phy phy-4a084000.phy.3: Linked as a consumer to regulator.21 [ 8.186097] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d [ 8.280337] remoteproc remoteproc2: registered virtio2 (type 7) [ 8.293260] phy phy-4a085000.phy.4: Linked as a consumer to regulator.21 [ 8.319319] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 8.387096] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit [ 8.421821] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.474935] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 [ 8.480567] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.500169] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 8.524687] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 8.617495] omap-aes 4b500000.aes: will run requests pump with realtime priority [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ 8.669402] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 8.734184] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 8.778231] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 8.813777] scsi host0: ahci [ 8.816978] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 85 [ 9.102146] davinci_mdio 4b232400.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 9.142406] libphy: 4b232400.mdio: probed [ 9.189321] asoc-simple-card sound0: tlv320aic32x4-hifi <-> 4847c000.mcasp mapping ok [ 9.225029] davinci_mdio 4b232400.mdio: phy[1]: device 4b232400.mdio:01, driver NS DP83848C 10/100 Mbps PHY [ 9.255624] asoc-simple-card sound0: ASoC: no DMI vendor name! [ 9.276749] ata1: SATA link down (SStatus 0 SControl 300) [ 9.381613] asoc-simple-card sound1: tlv320aic32x4-hifi <-> 4846c000.mcasp mapping ok [ 9.389553] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 9.438216] libphy: 4b2b2400.mdio: probed [ 9.472596] asoc-simple-card sound1: ASoC: no DMI vendor name! [ 9.537713] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver NS DP83848C 10/100 Mbps PHY [ 9.598585] asoc-simple-card sound2: tlv320aic32x4-hifi <-> 48470000.mcasp mapping ok [ 9.643145] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver NS DP83848C 10/100 Mbps PHY [ 9.691600] asoc-simple-card sound2: ASoC: no DMI vendor name! [ 9.754624] remoteproc remoteproc3: 4b234000.pru is available [ 9.760452] pru-rproc 4b234000.pru: PRU rproc node pru@4b234000 probed successfully [ 9.898500] remoteproc remoteproc4: 4b238000.pru is available [ 9.985402] pru-rproc 4b238000.pru: PRU rproc node pru@4b238000 probed successfully [ 10.093411] remoteproc remoteproc5: 4b2b4000.pru is available [ 10.099241] pru-rproc 4b2b4000.pru: PRU rproc node pru@4b2b4000 probed successfully [ 10.272350] remoteproc remoteproc6: 4b2b8000.pru is available [ 10.278183] pru-rproc 4b2b8000.pru: PRU rproc node pru@4b2b8000 probed successfully [ 10.542683] prueth pruss1_eth: pruss_fw_drop_untagged_vlan 0 [ 10.548375] prueth pruss1_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff [ 10.677546] prueth pruss1_eth: TI PRU ethernet (type 0) driver initialized [ OK ] Started weston.service. [ 10.963362] prueth pruss2_eth: pruss_fw_drop_untagged_vlan 0 [ 10.969052] prueth pruss2_eth: pruss MC Mask (Port 0) ff:ff:ff:ff:ff:ff [ 11.075479] prueth pruss2_eth: pruss MC Mask (Port 1) ff:ff:ff:ff:ff:ff [ 11.170603] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized [ 12.166314] dwc3 48890000.usb: Failed to get clk 'ref': -2 [ 12.194802] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service dce-callback with src 1024 dst 101 [ 12.276920] NET: Registered protocol family 45 [ 12.282321] dwc3 488d0000.usb: Failed to get clk 'ref': -2 [ 12.315081] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: probing service rpmsg-dce with src 1025 dst 102 [ 12.324818] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 4 [ 12.416468] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: published functions = 9 [ 12.695348] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 12.700880] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 12.811592] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 12.872868] iep ptp bc clkid -1 [ 12.876069] remoteproc remoteproc5: powering up 4b2b4000.pru [ 12.902795] xhci-hcd xhci-hcd.0.auto: irq 175, io mem 0x48890000 [ 12.912745] remoteproc remoteproc5: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 7228 [ 12.928357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 12.952161] pruss 4b280000.pruss: configured system_events[63-0] = 00000600,04500000 [ 12.959944] pruss 4b280000.pruss: configured intr_channels = 0x000000d5 host_intr = 0x00000155 [ 12.981595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.007153] usb usb1: Product: xHCI Host Controller [ 13.024178] usb usb1: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 13.030899] remoteproc remoteproc5: remote processor 4b2b4000.pru is now up [ 13.052962] usb usb1: SerialNumber: xhci-hcd.0.auto [ 13.065229] net eth1: started [ 13.082356] hub 1-0:1.0: USB hub found [ 13.101203] hub 1-0:1.0: 1 port detected [ 13.116424] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 13.138272] remoteproc remoteproc6: powering up 4b2b8000.pru [ 13.145817] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 13.162536] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256 [ 13.171677] pruss 4b280000.pruss: configured system_events[63-0] = 00600000,08a00000 [ 13.195466] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 13.213311] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 13.234363] pruss 4b280000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa [ 13.260747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 13.278196] remoteproc remoteproc6: remote processor 4b2b8000.pru is now up [ 13.292659] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.299927] usb usb2: Product: xHCI Host Controller [ 13.318304] net eth2: started [ 13.333234] iep ptp bc clkid -1 [ 13.336441] remoteproc remoteproc4: powering up 4b238000.pru [ 13.356013] usb usb2: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 13.374611] remoteproc remoteproc4: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 7256 [ 13.393202] usb usb2: SerialNumber: xhci-hcd.0.auto [ 13.408564] hub 2-0:1.0: USB hub found [ 13.415283] pruss 4b200000.pruss: configured system_events[63-0] = 00600000,08a00000 [ 13.433703] hub 2-0:1.0: 1 port detected [ 13.447735] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 13.456602] pruss 4b200000.pruss: configured intr_channels = 0x0000032a host_intr = 0x000002aa [ 13.478950] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 13.498750] remoteproc remoteproc4: remote processor 4b238000.pru is now up [ 13.515441] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 13.537355] net eth0: started [ 13.565910] xhci-hcd xhci-hcd.1.auto: irq 176, io mem 0x488d0000 [ 13.593529] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 13.641286] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.688693] usb usb3: Product: xHCI Host Controller [ 13.710183] usb usb3: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 13.754649] usb usb3: SerialNumber: xhci-hcd.1.auto [ 13.764416] hub 3-0:1.0: USB hub found [ 13.782041] hub 3-0:1.0: 1 port detected [ 13.799610] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 13.815147] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 13.844553] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 13.863527] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 13.898159] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 13.929470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.952451] usb usb4: Product: xHCI Host Controller [ 13.957364] usb usb4: Manufacturer: Linux 4.19.94-gbe5389fd85 xhci-hcd [ 13.984810] usb usb4: SerialNumber: xhci-hcd.1.auto [ 14.012725] hub 4-0:1.0: USB hub found [ 14.024581] hub 4-0:1.0: 1 port detected *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf bash-dev bash bc binutils-dev binutils bison-dev bison cifs-utils cpio cpp-symlinks cpp dosfstools elfutils-dev elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbc6x gdbserver gettext glmark2 gstreamer1.0-libav gzip hidapi libasm1 libbfd libcairo-perf-utils libdw1 libelf1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmavconn libmpc3 libmpfr6 libreadline-dev libreadline7 libunistring2 m4-dev m4 make mavlink mavros-extras mavros-msgs mavros nettle parted pdm-anomaly-detection socketcan-interface swig-dev swig which If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. Starting Save/Restore Sound Card State... [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Matrix GUI... [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight…ightness of backlight:backlight... Starting Time & Date Service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Save/Restore Sound Card State. [ OK ] Started Matrix GUI. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Synchronize System and HW clocks. [ OK ] Started Time & Date Service. Starting Rotate log files... [ OK ] Reached target Sound Card. Stopping Simple Network Management Protocol (SNMP) Daemon.... [ OK ] Created slice system-systemd\x2dcoredump.slice. [ OK ] Started Process Core Dump (PID 986/UID 0). [ OK ] Stopped Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started Rotate log files. [ OK ] Started Login Service. Stopping Redis In-Memory Data Store... [ OK ] Stopped Redis In-Memory Data Store. [ 17.359369] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2019.11 am57xx-evm ttyS2 am57xx-evm login: