/* * TEXAS INSTRUMENTS TEXT FILE LICENSE * * Copyright (c) 2023 Texas Instruments Incorporated * * All rights reserved not granted herein. * * Limited License. * * Texas Instruments Incorporated grants a world-wide, royalty-free, non-exclusive * license under copyrights and patents it now or hereafter owns or controls to * make, have made, use, import, offer to sell and sell ("Utilize") this software * subject to the terms herein. With respect to the foregoing patent license, * such license is granted solely to the extent that any such patent is necessary * to Utilize the software alone. The patent license shall not apply to any * combinations which include this software, other than combinations with devices * manufactured by or for TI ("TI Devices"). No hardware patent is licensed hereunder. * * Redistributions must preserve existing copyright notices and reproduce this license * (including the above copyright notice and the disclaimer and (if applicable) source * code license limitations below) in the documentation and/or other materials provided * with the distribution. * * Redistribution and use in binary form, without modification, are permitted provided * that the following conditions are met: * No reverse engineering, decompilation, or disassembly of this software is * permitted with respect to any software provided in binary form. * Any redistribution and use are licensed by TI for use only with TI Devices. * Nothing shall obligate TI to provide you with source code for the software * licensed and provided to you in object code. * * If software source code is provided to you, modification and redistribution of the * source code are permitted provided that the following conditions are met: * Any redistribution and use of the source code, including any resulting derivative * works, are licensed by TI for use only with TI Devices. * Any redistribution and use of any object code compiled from the source code * and any resulting derivative works, are licensed by TI for use only with TI Devices. * * Neither the name of Texas Instruments Incorporated nor the names of its suppliers * may be used to endorse or promote products derived from this software without * specific prior written permission. * * DISCLAIMER. * * THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL TI AND TI'S * LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** * \file Port_PBcfg.c * * \brief This file contains generated post build configuration file * for PORT MCAL driver * */ /********************************************************************************************************************** Project: SIPpackage Date : 2024-04-03 23:42:17 This file is generated by EB Tresos Do not modify this file, otherwise the software may behave in unexpected way. *********************************************************************************************************************/ #define PORT_CFG_SOURCE /********************************************************************************************************************** * INCLUDES *********************************************************************************************************************/ #include "Std_Types.h" #include "Port.h" #include "hw_ctrl_core.h" /********************************************************************************************************************** * VERSION CHECK *********************************************************************************************************************/ /* Version checking */ #if ((PORT_SW_MAJOR_VERSION != (10U))||(PORT_SW_MINOR_VERSION != (2U))) #error "Version numbers of Port_PBcfg.c and Port.h are inconsistent!" #endif #if ((PORT_CFG_MAJOR_VERSION != (10U))||(PORT_CFG_MINOR_VERSION != (2U))) #error "Version numbers of Port_PBcfg.c and Port_Cfg.h are inconsistent!" #endif /********************************************************************************************************************** * GLOBAL FUNCTION PROTOTYPES *********************************************************************************************************************/ /********************************************************************************************************************** * LOCAL MACROS **********************************************************************************************************************/ /*MCAL: S MR:1.1 "Reason - Start Section Code is also defined Port.h" */ #define PORT_START_SEC_CONFIG_DATA /*MCAL: S MR:19.1 "Reason - This is the format for specifying memory sections" */ #include "Port_MemMap.h" /**/ static CONST( Port_PinConfigType, PORT_PBCFG) PortConfigSet_0_PinConfig[] = { { .Port_PinId = 87, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_DISABLE_OUTPUT_OVERRIDE, .Port_InputOverride_Ctrl = PORT_PIN_DISABLE_INPUT_OVERRIDE, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = TRUE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_GPIOGH, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_GPIOGH, .muxmode = 7, }, }, .Port_PinDioRegId = (4 - 1U), /* GPIO register index is 0 based */ .Port_PinDioChannelId = 24, .Port_RegOffsetAddr = PINC15_PR0_PRU1_GPIO18, //.Port_PinSignalName = (const sint8 *)"GPIO120", //.Port_PinName = (const sint8 *)"PIN_C15", }, { .Port_PinId = 89, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_DISABLE_OUTPUT_OVERRIDE, .Port_InputOverride_Ctrl = PORT_PIN_DISABLE_INPUT_OVERRIDE, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = TRUE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_GPIOGH, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_GPIOGH, .muxmode = 7, }, }, .Port_PinDioRegId = (4 - 1U), /* GPIO register index is 0 based */ .Port_PinDioChannelId = 26, .Port_RegOffsetAddr = PINB16_SDFM0_CLK0, //.Port_PinSignalName = (const sint8 *)"GPIO122", //.Port_PinName = (const sint8 *)"PIN_B16", }, { .Port_PinId = 95, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_DISABLE_OUTPUT_OVERRIDE, .Port_InputOverride_Ctrl = PORT_PIN_DISABLE_INPUT_OVERRIDE, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = TRUE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_GPIOI, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_GPIOI, .muxmode = 7, }, }, .Port_PinDioRegId = (5 - 1U), /* GPIO register index is 0 based */ .Port_PinDioChannelId = 0, .Port_RegOffsetAddr = PINA15_SDFM0_CLK3, //.Port_PinSignalName = (const sint8 *)"GPIO128", //.Port_PinName = (const sint8 *)"PIN_A15", }, { .Port_PinId = 44, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = TRUE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB6_MMC_CLK, //.Port_PinSignalName = (const sint8 *)"UART0_RXD", //.Port_PinName = (const sint8 *)"PIN_B6", }, { .Port_PinId = 45, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = TRUE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA4_MMC_CMD, //.Port_PinSignalName = (const sint8 *)"UART0_TXD", //.Port_PinName = (const sint8 *)"PIN_A4", }, { .Port_PinId = 2, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA11_SPI0_CLK, //.Port_PinSignalName = (const sint8 *)"SPI0_CLK", //.Port_PinName = (const sint8 *)"PIN_A11", }, { .Port_PinId = 1, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC11_SPI0_CS0, //.Port_PinSignalName = (const sint8 *)"SPI0_CS0", //.Port_PinName = (const sint8 *)"PIN_C11", }, { .Port_PinId = 3, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC10_SPI0_D0, //.Port_PinSignalName = (const sint8 *)"SPI0_D0", //.Port_PinName = (const sint8 *)"PIN_C10", }, { .Port_PinId = 4, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB11_SPI0_D1, //.Port_PinSignalName = (const sint8 *)"SPI0_D1", //.Port_PinName = (const sint8 *)"PIN_B11", }, { .Port_PinId = 311, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL2_GPIO9, //.Port_PinSignalName = (const sint8 *)"OSPI0_CLK", //.Port_PinName = (const sint8 *)"PIN_L2", }, { .Port_PinId = 303, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINP1_GPIO0, //.Port_PinSignalName = (const sint8 *)"OSPI0_D0", //.Port_PinName = (const sint8 *)"PIN_P1", }, { .Port_PinId = 316, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ1_GPIO66, //.Port_PinSignalName = (const sint8 *)"OSPI0_D1", //.Port_PinName = (const sint8 *)"PIN_J1", }, { .Port_PinId = 310, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_SYNC_QUAL, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL1_GPIO8, //.Port_PinSignalName = (const sint8 *)"OSPI0_D2", //.Port_PinName = (const sint8 *)"PIN_L1", }, { .Port_PinId = 319, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK4_GPIO69, //.Port_PinSignalName = (const sint8 *)"OSPI0_D3", //.Port_PinName = (const sint8 *)"PIN_K4", }, { .Port_PinId = 315, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINH1_GPIO65, //.Port_PinSignalName = (const sint8 *)"OSPI0_CSn0", //.Port_PinName = (const sint8 *)"PIN_H1", }, { .Port_PinId = 60, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK17_PR0_PRU0_GPIO0, //.Port_PinSignalName = (const sint8 *)"RGMII2_RD0", //.Port_PinName = (const sint8 *)"PIN_K17", }, { .Port_PinId = 61, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK18_PR0_PRU0_GPIO1, //.Port_PinSignalName = (const sint8 *)"RGMII2_RD1", //.Port_PinName = (const sint8 *)"PIN_K18", }, { .Port_PinId = 62, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ18_PR0_PRU0_GPIO2, //.Port_PinSignalName = (const sint8 *)"RGMII2_RD2", //.Port_PinName = (const sint8 *)"PIN_J18", }, { .Port_PinId = 63, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ17_PR0_PRU0_GPIO3, //.Port_PinSignalName = (const sint8 *)"RGMII2_RD3", //.Port_PinName = (const sint8 *)"PIN_J17", }, { .Port_PinId = 59, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK16_PR0_PRU0_GPIO4, //.Port_PinSignalName = (const sint8 *)"RGMII2_RX_CTL", //.Port_PinName = (const sint8 *)"PIN_K16", }, { .Port_PinId = 58, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK15_PR0_PRU0_GPIO6, //.Port_PinSignalName = (const sint8 *)"RGMII2_RXC", //.Port_PinName = (const sint8 *)"PIN_K15", }, { .Port_PinId = 66, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM16_PR0_PRU0_GPIO11, //.Port_PinSignalName = (const sint8 *)"RGMII2_TD0", //.Port_PinName = (const sint8 *)"PIN_M16", }, { .Port_PinId = 67, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM15_PR0_PRU0_GPIO12, //.Port_PinSignalName = (const sint8 *)"RGMII2_TD1", //.Port_PinName = (const sint8 *)"PIN_M15", }, { .Port_PinId = 68, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINH17_PR0_PRU0_GPIO13, //.Port_PinSignalName = (const sint8 *)"RGMII2_TD2", //.Port_PinName = (const sint8 *)"PIN_H17", }, { .Port_PinId = 69, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINH16_PR0_PRU0_GPIO14, //.Port_PinSignalName = (const sint8 *)"RGMII2_TD3", //.Port_PinName = (const sint8 *)"PIN_H16", }, { .Port_PinId = 65, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL16_PR0_PRU0_GPIO15, //.Port_PinSignalName = (const sint8 *)"RGMII2_TX_CTL", //.Port_PinName = (const sint8 *)"PIN_L16", }, { .Port_PinId = 64, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINH18_PR0_PRU0_GPIO16, //.Port_PinSignalName = (const sint8 *)"RGMII2_TXC", //.Port_PinName = (const sint8 *)"PIN_H18", }, { .Port_PinId = 22, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_MDIO, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MDIO, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM17_MDIO_MDC, //.Port_PinSignalName = (const sint8 *)"MDIO_MDC", //.Port_PinName = (const sint8 *)"PIN_M17", }, { .Port_PinId = 21, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_MDIO, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MDIO, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINN16_MDIO_MDIO, //.Port_PinSignalName = (const sint8 *)"MDIO_MDIO", //.Port_PinName = (const sint8 *)"PIN_N16", }, { .Port_PinId = 17, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_RGMII1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINR17_RGMII1_RXC, //.Port_PinSignalName = (const sint8 *)"RGMII1_RXC", //.Port_PinName = (const sint8 *)"PIN_R17", }, { .Port_PinId = 20, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINP16_RGMII1_TD0, //.Port_PinSignalName = (const sint8 *)"RGMII1_TD0", //.Port_PinName = (const sint8 *)"PIN_P16", }, { .Port_PinId = 19, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM18_RGMII1_TX_CTL, //.Port_PinSignalName = (const sint8 *)"RGMII1_TX_CTL", //.Port_PinName = (const sint8 *)"PIN_M18", }, { .Port_PinId = 18, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_RGMII1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_RGMII1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINN18_RGMII1_TXC, //.Port_PinSignalName = (const sint8 *)"RGMII1_TXC", //.Port_PinName = (const sint8 *)"PIN_N18", }, { .Port_PinId = 102, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_I2C0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_I2C0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA13_I2C0_SCL, //.Port_PinSignalName = (const sint8 *)"I2C0_SCL", //.Port_PinName = (const sint8 *)"PIN_A13", }, { .Port_PinId = 101, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_I2C0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_I2C0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB13_I2C0_SDA, //.Port_PinSignalName = (const sint8 *)"I2C0_SDA", //.Port_PinName = (const sint8 *)"PIN_B13", }, { .Port_PinId = 13, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_I2C2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_I2C2, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC7_UART0_RTSN, //.Port_PinSignalName = (const sint8 *)"I2C2_SCL", //.Port_PinName = (const sint8 *)"PIN_C7", }, { .Port_PinId = 14, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_I2C2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_I2C2, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB7_UART0_CTSN, //.Port_PinSignalName = (const sint8 *)"I2C2_SDA", //.Port_PinName = (const sint8 *)"PIN_B7", }, { .Port_PinId = 74, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE16_PR0_PRU1_GPIO6, //.Port_PinSignalName = (const sint8 *)"MCAN0_RX", //.Port_PinName = (const sint8 *)"PIN_E16", }, { .Port_PinId = 75, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF16_PR0_PRU1_GPIO4, //.Port_PinSignalName = (const sint8 *)"MCAN0_TX", //.Port_PinName = (const sint8 *)"PIN_F16", }, { .Port_PinId = 76, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN1, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF18_PR0_PRU1_GPIO0, //.Port_PinSignalName = (const sint8 *)"MCAN1_RX", //.Port_PinName = (const sint8 *)"PIN_F18", }, { .Port_PinId = 47, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN1, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB4_MMC_DAT1, //.Port_PinSignalName = (const sint8 *)"MCAN1_TX", //.Port_PinName = (const sint8 *)"PIN_B4", }, { .Port_PinId = 41, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM9, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM9, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING1_EPWM9_A, //.Port_PinSignalName = (const sint8 *)"EPWM9_A", //.Port_PinName = (const sint8 *)"PIN_G1", }, { .Port_PinId = 104, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN2, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA12_MCAN2_RX, //.Port_PinSignalName = (const sint8 *)"MCAN2_RX", //.Port_PinName = (const sint8 *)"PIN_A12", }, { .Port_PinId = 103, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_MCAN2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_MCAN2, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB12_MCAN2_TX, //.Port_PinSignalName = (const sint8 *)"MCAN2_TX", //.Port_PinName = (const sint8 *)"PIN_B12", }, { .Port_PinId = 6, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA10_SPI1_CLK, //.Port_PinSignalName = (const sint8 *)"SPI1_CLK", //.Port_PinName = (const sint8 *)"PIN_A10", }, { .Port_PinId = 5, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC9_SPI1_CS0, //.Port_PinSignalName = (const sint8 *)"SPI1_CS0", //.Port_PinName = (const sint8 *)"PIN_C9", }, { .Port_PinId = 7, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB10_SPI1_D0, //.Port_PinSignalName = (const sint8 *)"SPI1_D0", //.Port_PinName = (const sint8 *)"PIN_B10", }, { .Port_PinId = 8, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND9_SPI1_D1, //.Port_PinSignalName = (const sint8 *)"SPI1_D1", //.Port_PinName = (const sint8 *)"PIN_D9", }, { .Port_PinId = 324, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI2, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB9_LIN1_TXD, //.Port_PinSignalName = (const sint8 *)"SPI2_CLK", //.Port_PinName = (const sint8 *)"PIN_B9", }, { .Port_PinId = 323, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI2, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA9_LIN1_RXD, //.Port_PinSignalName = (const sint8 *)"SPI2_CS0", //.Port_PinName = (const sint8 *)"PIN_A9", }, { .Port_PinId = 9, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI2, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB8_LIN2_RXD, //.Port_PinSignalName = (const sint8 *)"SPI2_D0", //.Port_PinName = (const sint8 *)"PIN_B8", }, { .Port_PinId = 10, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI2, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA8_LIN2_TXD, //.Port_PinSignalName = (const sint8 *)"SPI2_D1", //.Port_PinName = (const sint8 *)"PIN_A8", }, { .Port_PinId = 97, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI4, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI4, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB14_EQEP0_A, //.Port_PinSignalName = (const sint8 *)"SPI4_CLK", //.Port_PinName = (const sint8 *)"PIN_B14", }, { .Port_PinId = 98, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI4, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI4, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA14_EQEP0_B, //.Port_PinSignalName = (const sint8 *)"SPI4_CS0", //.Port_PinName = (const sint8 *)"PIN_A14", }, { .Port_PinId = 304, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI4, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI4, .muxmode = 4, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINR3_GPIO1, //.Port_PinSignalName = (const sint8 *)"SPI4_CS1", //.Port_PinName = (const sint8 *)"PIN_R3", }, { .Port_PinId = 99, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI4, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI4, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC12_EQEP0_STROBE, //.Port_PinSignalName = (const sint8 *)"SPI4_D0", //.Port_PinName = (const sint8 *)"PIN_C12", }, { .Port_PinId = 100, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_ENABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_SPI4, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_SPI4, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND11_EQEP0_INDEX, //.Port_PinSignalName = (const sint8 *)"SPI4_D1", //.Port_PinName = (const sint8 *)"PIN_D11", }, { .Port_PinId = 43, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART1, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING4_EPWM10_A, //.Port_PinSignalName = (const sint8 *)"UART1_CTSn", //.Port_PinName = (const sint8 *)"PIN_G4", }, { .Port_PinId = 42, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART1, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ2_EPWM9_B, //.Port_PinSignalName = (const sint8 *)"UART1_RTSn", //.Port_PinName = (const sint8 *)"PIN_J2", }, { .Port_PinId = 321, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL3_UART1_RXD, //.Port_PinSignalName = (const sint8 *)"UART1_RXD", //.Port_PinName = (const sint8 *)"PIN_L3", }, { .Port_PinId = 322, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM3_UART1_TXD, //.Port_PinSignalName = (const sint8 *)"UART1_TXD", //.Port_PinName = (const sint8 *)"PIN_M3", }, { .Port_PinId = 46, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART2, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB5_MMC_DAT0, //.Port_PinSignalName = (const sint8 *)"UART2_RXD", //.Port_PinName = (const sint8 *)"PIN_B5", }, { .Port_PinId = 48, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART2, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA3_MMC_DAT2, //.Port_PinSignalName = (const sint8 *)"UART2_TXD", //.Port_PinName = (const sint8 *)"PIN_A3", }, { .Port_PinId = 92, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART5, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART5, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND13_SDFM0_D1, //.Port_PinSignalName = (const sint8 *)"UART5_CTSn", //.Port_PinName = (const sint8 *)"PIN_D13", }, { .Port_PinId = 91, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART5, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART5, .muxmode = 2, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA16_SDFM0_CLK1, //.Port_PinSignalName = (const sint8 *)"UART5_RTSn", //.Port_PinName = (const sint8 *)"PIN_A16", }, { .Port_PinId = 94, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_UART5, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART5, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC13_SDFM0_D2, //.Port_PinSignalName = (const sint8 *)"UART5_RXD", //.Port_PinName = (const sint8 *)"PIN_C13", }, { .Port_PinId = 93, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_UART5, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_UART5, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINP15_EPWM15_A, //.Port_PinSignalName = (const sint8 *)"UART5_TXD", //.Port_PinName = (const sint8 *)"PIN_B15", }, { .Port_PinId = 35, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE1_EPWM6_A, //.Port_PinSignalName = (const sint8 *)"FSIRX1_CLK", //.Port_PinName = (const sint8 *)"PIN_E1", }, { .Port_PinId = 36, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF3_EPWM6_B, //.Port_PinSignalName = (const sint8 *)"FSIRX1_D0", //.Port_PinName = (const sint8 *)"PIN_F3", }, { .Port_PinId = 37, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF4_EPWM7_A, //.Port_PinSignalName = (const sint8 *)"FSIRX1_D1", //.Port_PinName = (const sint8 *)"PIN_F4", }, { .Port_PinId = 77, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING16_PR0_PRU1_GPIO1, //.Port_PinSignalName = (const sint8 *)"FSIRX2_CLK", //.Port_PinName = (const sint8 *)"PIN_G16", }, { .Port_PinId = 78, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE17_PR0_PRU1_GPIO2, //.Port_PinSignalName = (const sint8 *)"FSIRX2_D0", //.Port_PinName = (const sint8 *)"PIN_E17", }, { .Port_PinId = 79, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX2, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE18_PR0_PRU1_GPIO3, //.Port_PinSignalName = (const sint8 *)"FSIRX2_D1", //.Port_PinName = (const sint8 *)"PIN_E18", }, { .Port_PinId = 83, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB17_PR0_PRU1_GPIO12, //.Port_PinSignalName = (const sint8 *)"FSIRX3_CLK", //.Port_PinName = (const sint8 *)"PIN_B17", }, { .Port_PinId = 84, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = TRUE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND16_PR0_PRU1_GPIO13, //.Port_PinSignalName = (const sint8 *)"FSIRX3_D0", //.Port_PinName = (const sint8 *)"PIN_D16", }, { .Port_PinId = 85, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_IN, .Port_PinInitialMode = PORT_PIN_MODE_FSIRX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSIRX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC17_PR0_PRU1_GPIO14, //.Port_PinSignalName = (const sint8 *)"FSIRX3_D1", //.Port_PinName = (const sint8 *)"PIN_C17", }, { .Port_PinId = 32, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE4_EPWM4_B, //.Port_PinSignalName = (const sint8 *)"FSITX1_CLK", //.Port_PinName = (const sint8 *)"PIN_E4", }, { .Port_PinId = 33, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF2_EPWM5_A, //.Port_PinSignalName = (const sint8 *)"FSITX1_D0", //.Port_PinName = (const sint8 *)"PIN_F2", }, { .Port_PinId = 34, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX1, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING2_EPWM5_B, //.Port_PinSignalName = (const sint8 *)"FSITX1_D1", //.Port_PinName = (const sint8 *)"PIN_G2", }, { .Port_PinId = 80, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC16_PR0_PRU1_GPIO16, //.Port_PinSignalName = (const sint8 *)"FSITX3_CLK", //.Port_PinName = (const sint8 *)"PIN_C16", }, { .Port_PinId = 81, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA17_PR0_PRU1_GPIO15, //.Port_PinSignalName = (const sint8 *)"FSITX3_D0", //.Port_PinName = (const sint8 *)"PIN_A17", }, { .Port_PinId = 82, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_FSITX3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_FSITX3, .muxmode = 3, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB18_PR0_PRU1_GPIO11, //.Port_PinSignalName = (const sint8 *)"FSITX3_D1", //.Port_PinName = (const sint8 *)"PIN_B18", }, { .Port_PinId = 23, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB2_EPWM0_A, //.Port_PinSignalName = (const sint8 *)"EPWM0_A", //.Port_PinName = (const sint8 *)"PIN_B2", }, { .Port_PinId = 24, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM0, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINB1_EPWM0_B, //.Port_PinSignalName = (const sint8 *)"EPWM0_B", //.Port_PinName = (const sint8 *)"PIN_B1", }, { .Port_PinId = 25, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND3_EPWM1_A, //.Port_PinSignalName = (const sint8 *)"EPWM1_A", //.Port_PinName = (const sint8 *)"PIN_D3", }, { .Port_PinId = 26, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM1, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM1, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND2_EPWM1_B, //.Port_PinSignalName = (const sint8 *)"EPWM1_B", //.Port_PinName = (const sint8 *)"PIN_D2", }, { .Port_PinId = 27, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM2, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC2_EPWM2_A, //.Port_PinSignalName = (const sint8 *)"EPWM2_A", //.Port_PinName = (const sint8 *)"PIN_C2", }, { .Port_PinId = 28, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM2, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM2, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC1_EPWM2_B, //.Port_PinSignalName = (const sint8 *)"EPWM2_B", //.Port_PinName = (const sint8 *)"PIN_C1", }, { .Port_PinId = 29, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM3, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE2_EPWM3_A, //.Port_PinSignalName = (const sint8 *)"EPWM3_A", //.Port_PinName = (const sint8 *)"PIN_E2", }, { .Port_PinId = 30, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM3, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM3, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINE3_EPWM3_B, //.Port_PinSignalName = (const sint8 *)"EPWM3_B", //.Port_PinName = (const sint8 *)"PIN_E3", }, { .Port_PinId = 39, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM8, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM8, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING3_EPWM8_A, //.Port_PinSignalName = (const sint8 *)"EPWM8_A", //.Port_PinName = (const sint8 *)"PIN_G3", }, { .Port_PinId = 40, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM8, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM8, .muxmode = 0, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINH2_EPWM8_B, //.Port_PinSignalName = (const sint8 *)"EPWM8_B", //.Port_PinName = (const sint8 *)"PIN_H2", }, { .Port_PinId = 52, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM21, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM21, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL17_PR0_MDIO_MDIO, //.Port_PinSignalName = (const sint8 *)"EPWM21_A", //.Port_PinName = (const sint8 *)"PIN_L17", }, { .Port_PinId = 53, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM21, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM21, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINL18_PR0_MDIO_MDC, //.Port_PinSignalName = (const sint8 *)"EPWM21_B", //.Port_PinName = (const sint8 *)"PIN_L18", }, { .Port_PinId = 54, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM22, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM22, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING17_PR0_PRU0_GPIO5, //.Port_PinSignalName = (const sint8 *)"EPWM22_A", //.Port_PinName = (const sint8 *)"PIN_G17", }, { .Port_PinId = 55, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM22, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM22, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF17_PR0_PRU0_GPIO9, //.Port_PinSignalName = (const sint8 *)"EPWM22_B", //.Port_PinName = (const sint8 *)"PIN_F17", }, { .Port_PinId = 56, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_LOW, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM23, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM23, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING18_PR0_PRU0_GPIO10, //.Port_PinSignalName = (const sint8 *)"EPWM23_A", //.Port_PinName = (const sint8 *)"PIN_G18", }, { .Port_PinId = 57, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM23, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM23, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PING15_PR0_PRU0_GPIO8, //.Port_PinSignalName = (const sint8 *)"EPWM23_B", //.Port_PinName = (const sint8 *)"PIN_G15", }, { .Port_PinId = 70, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM30, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM30, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINF15_PR0_PRU1_GPIO5, //.Port_PinSignalName = (const sint8 *)"EPWM30_A", //.Port_PinName = (const sint8 *)"PIN_F15", }, { .Port_PinId = 71, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM30, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM30, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINC18_PR0_PRU1_GPIO9, //.Port_PinSignalName = (const sint8 *)"EPWM30_B", //.Port_PinName = (const sint8 *)"PIN_C18", }, { .Port_PinId = 72, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM31, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM31, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND17_PR0_PRU1_GPIO10, //.Port_PinSignalName = (const sint8 *)"EPWM31_A", //.Port_PinName = (const sint8 *)"PIN_D17", }, { .Port_PinId = 73, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_EPWM31, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_EPWM31, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PIND18_PR0_PRU1_GPIO8, //.Port_PinSignalName = (const sint8 *)"EPWM31_B", //.Port_PinName = (const sint8 *)"PIN_D18", }, { .Port_PinId = 313, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINP3_GPIO6, //.Port_PinSignalName = (const sint8 *)"OSPI0_D4", //.Port_PinName = (const sint8 *)"PIN_P3", }, { .Port_PinId = 314, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DISABLE, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_OUT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 5, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ3_GPIO64, //.Port_PinSignalName = (const sint8 *)"OSPI0_RESET_OUT0", //.Port_PinName = (const sint8 *)"PIN_J3", }, { .Port_PinId = 317, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_PULLDOWN, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINK2_GPIO67, //.Port_PinSignalName = (const sint8 *)"OSPI0_D5", //.Port_PinName = (const sint8 *)"PIN_K2", }, { .Port_PinId = 308, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM4_GPIO5, //.Port_PinSignalName = (const sint8 *)"OSPI0_D6", //.Port_PinName = (const sint8 *)"PIN_M4", }, { .Port_PinId = 318, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_INVTYPE_DEFAULT, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINJ4_GPIO68, //.Port_PinSignalName = (const sint8 *)"OSPI0_D7", //.Port_PinName = (const sint8 *)"PIN_J4", }, { .Port_PinId = 309, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_OSPI0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_INVTYPE_DEFAULT, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_OSPI0, .muxmode = 6, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINM1_GPIO7, //.Port_PinSignalName = (const sint8 *)"OSPI0_DQS", //.Port_PinName = (const sint8 *)"PIN_M1", }, { .Port_PinId = 15, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_LIN0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_PULLDOWN, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_LIN0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA7_UART0_RXD, //.Port_PinSignalName = (const sint8 *)"LIN0_RXD", //.Port_PinName = (const sint8 *)"PIN_A7", }, { .Port_PinId = 16, .Port_PullInhibitEnable = PORT_PIN_PULL_INHIBIT_DEFAULT, .Port_OutputOverride_Ctrl = PORT_PIN_OUTPUT_RETAIN_HW_CTRL, .Port_InputOverride_Ctrl = PORT_PIN_INPUT_RETAIN_HW_CTRL, .Port_DirectionChangeable = FALSE, .Port_PinModeChangeable = FALSE, .Port_PinLevelValue = PORT_PIN_LEVEL_HIGH, .Port_PinDirection = PORT_PIN_DEFAULT, .Port_PinInitialMode = PORT_PIN_MODE_LIN0, .Port_PullTypeSelect = PORT_PIN_PULLTYPE_DEFAULT, .Port_PinHSmasterEnable = FALSE, .Port_PinHSmodeEnable = FALSE, .Port_InversionSelect = PORT_NONINV, .Port_QualifierTypeSelect = PORT_QUALTYPE_DEFAULT, .Port_SlewControl = PORT_PIN_SLEWCONTROL_SLOW_SLEW, .Port_GpioOwnerCore = 0, .Port_NumPortModes = 1, .Port_PinMode = { [0] = { .mode = PORT_PIN_MODE_LIN0, .muxmode = 1, }, }, .Port_PinDioRegId = PORT_DIO_INVALID_REG_ID, /* GPIO register index is 0 based */ .Port_PinDioChannelId = PORT_DIO_INVALID_REG_ID, .Port_RegOffsetAddr = PINA6_UART0_TXD, //.Port_PinSignalName = (const sint8 *)"LIN0_TXD", //.Port_PinName = (const sint8 *)"PIN_A6", }, }; /**/ static CONST( Port_DioRegConfigType, PORT_PBCFG) PortConfigSet_0_DioConfig[] = { [0] = { .Port_DioPinNumber = 21, .Port_PinSelectEdgeTrigger = PORT_RISING_EDGE, .Port_PinSelectInterruptType = PORT_BANK_INTR, #if(PORT_ENABLE_INTR_API == STD_ON) .Port_DioInterruptNotification = (Port_IsrNotificationType) NULL_PTR, #endif }, }; /**/ CONST(Port_ConfigType, PORT_PBCFG) Port_Config = { .NumberOfPortPins = 110, .PinConfig_pt = PortConfigSet_0_PinConfig, .NumberOfGPIORegs = 1, .DioConfig_pt = PortConfigSet_0_DioConfig, }; #define PORT_STOP_SEC_CONFIG_DATA #include "Port_MemMap.h" /********************************************************************************************************************** * END OF FILE: Port_PBcfg.c * **********************************************************************************************************************/