U-Boot SPL 2023.04-dirty (Jul 01 2024 - 10:27:56 -0400)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)')
SPL initial stack usage: 13408 bytes
Trying to boot from MMC2
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Authentication passed
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty
NOTICE:  BL31: Built : 16:09:05, Feb  9 2024

U-Boot SPL 2023.04-dirty (Jul 01 2024 - 10:28:03 -0400)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.8--v09.02.08 (Kool Koala)')
SPL initial stack usage: 1856 bytes
Trying to boot from MMC2
Authentication passed
Authentication passed


U-Boot 2023.04-dirty (Jul 01 2024 - 10:28:03 -0400)

SoC:   AM62X SR1.0 HS-FS
Model: Texas Instruments AM625 SK
EEPROM not available at 80, trying to read at 81
Reading on-board EEPROM at 0x51 failed -121
DRAM:  no bloblist found!2 GiB
Core:  66 devices, 28 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
EEPROM not available at 80, trying to read at 81
Reading on-board EEPROM at 0x51 failed -121
Net:   eth0: ethernet@8000000port@1
Warning: ethernet@8000000port@2 (eth1) using random MAC address - 92:94:e0:3e:b5:3d
, eth1: ethernet@8000000port@2
Hit any key to stop autoboot:  0
=> net list
eth0 : ethernet@8000000port@1 98:03:8a:7f:17:3f active
eth1 : ethernet@8000000port@2 92:94:e0:3e:b5:3d
=> setenv ethact eth1
=> net list
eth0 : ethernet@8000000port@1 98:03:8a:7f:17:3f active
eth1 : ethernet@8000000port@2 92:94:e0:3e:b5:3d
=> setenv autoload no; dhcp;
link up on port 2, speed 10, half duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12

Abort
=> net list
eth0 : ethernet@8000000port@1 98:03:8a:7f:17:3f
eth1 : ethernet@8000000port@2 92:94:e0:3e:b5:3d active
=> setenv ipaddr 192.168.1.51
=> ping 192.168.1.50
link up on port 2, speed 10, half duplex
Using ethernet@8000000port@2 device
host 192.168.1.50 is alive
=>