/** * \file am335x_pinmux.h * * \brief This file contains pad configure register offsets and bit-field * value macros for different configurations, * * 6 SLEWCTRL Select between faster or slower slew rate * 5 RXACTIVE Input enable value for the Pad * 4 PULLTYPESEL Pad pullup/pulldown type selection * 3 PULLUDEN Pad Pullup/pulldown enable * 2-0 MUXMODE Pad functional signal mux select * * \copyright Copyright (CU) 2015 Texas Instruments Incorporated - * http://www.ti.com/ */ /** * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDINGU, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef AM335X_PIN_MUX_H_ #define AM335X_PIN_MUX_H_ /* ========================================================================== */ /* Include Files */ /* ========================================================================== */ #include "pinmux.h" #ifdef __cplusplus extern "C" { #endif /* ========================================================================== */ /* Macros & Typedefs */ /* ========================================================================== */ /* macro used to define the MUXMODE for pad control registers. */ #define PIN_MODE(mode) (mode) /* Active mode configurations. */ /* Pull up/down enable. */ #define PIN_PULL_UD_EN (0x1U << 3U) /* Pull up/down type select. */ #define PIN_PULL_TYPE_SEL (0x1U << 4U) /* Receiver enable. */ #define PIN_RX_ACTIVE (0x1U << 5U) /** \brief Slew rate */ #define PIN_SLEW_SLOW (0x1U << 6U) #define PINMUX_REG_MASK (0x007FU) /** Pad config register offset in control module */ enum pinOffsets { PIN_GPMC_AD0 = 0x0800U, PIN_OFFSET_MIN = PIN_GPMC_AD0, PIN_GPMC_AD1 = 0x0804U, PIN_GPMC_AD2 = 0x0808U, PIN_GPMC_AD3 = 0x080cU, PIN_GPMC_AD4 = 0x0810U, PIN_GPMC_AD5 = 0x0814U, PIN_GPMC_AD6 = 0x0818U, PIN_GPMC_AD7 = 0x081cU, PIN_GPMC_AD8 = 0x0820U, PIN_GPMC_AD9 = 0x0824U, PIN_GPMC_AD10 = 0x0828U, PIN_GPMC_AD11 = 0x082cU, PIN_GPMC_AD12 = 0x0830U, PIN_GPMC_AD13 = 0x0834U, PIN_GPMC_AD14 = 0x0838U, PIN_GPMC_AD15 = 0x083cU, PIN_GPMC_A0 = 0x0840U, PIN_GPMC_A1 = 0x0844U, PIN_GPMC_A2 = 0x0848U, PIN_GPMC_A3 = 0x084cU, PIN_GPMC_A4 = 0x0850U, PIN_GPMC_A5 = 0x0854U, PIN_GPMC_A6 = 0x0858U, PIN_GPMC_A7 = 0x085cU, PIN_GPMC_A8 = 0x0860U, PIN_GPMC_A9 = 0x0864U, PIN_GPMC_A10 = 0x0868U, PIN_GPMC_A11 = 0x086cU, PIN_GPMC_WAIT0 = 0x0870U, PIN_GPMC_WPN = 0x0874U, PIN_GPMC_BE1N = 0x0878U, PIN_GPMC_CSN0 = 0x087cU, PIN_GPMC_CSN1 = 0x0880U, PIN_GPMC_CSN2 = 0x0884U, PIN_GPMC_CSN3 = 0x0888U, PIN_GPMC_CLK = 0x088cU, PIN_GPMC_ADVN_ALE = 0x0890U, PIN_GPMC_OEN_REN = 0x0894U, PIN_GPMC_WEN = 0x0898U, PIN_GPMC_BE0N_CLE = 0x089cU, PIN_LCD_DATA0 = 0x08a0U, PIN_LCD_DATA1 = 0x08a4U, PIN_LCD_DATA2 = 0x08a8U, PIN_LCD_DATA3 = 0x08acU, PIN_LCD_DATA4 = 0x08b0U, PIN_LCD_DATA5 = 0x08b4U, PIN_LCD_DATA6 = 0x08b8U, PIN_LCD_DATA7 = 0x08bcU, PIN_LCD_DATA8 = 0x08c0U, PIN_LCD_DATA9 = 0x08c4U, PIN_LCD_DATA10 = 0x08c8U, PIN_LCD_DATA11 = 0x08ccU, PIN_LCD_DATA12 = 0x08d0U, PIN_LCD_DATA13 = 0x08d4U, PIN_LCD_DATA14 = 0x08d8U, PIN_LCD_DATA15 = 0x08dcU, PIN_LCD_VSYNC = 0x08e0U, PIN_LCD_HSYNC = 0x08e4U, PIN_LCD_PCLK = 0x08e8U, PIN_LCD_AC_BIAS_EN = 0x08ecU, PIN_MMC0_DAT3 = 0x08f0U, PIN_MMC0_DAT2 = 0x08f4U, PIN_MMC0_DAT1 = 0x08f8U, PIN_MMC0_DAT0 = 0x08fcU, PIN_MMC0_CLK = 0x0900U, PIN_MMC0_CMD = 0x0904U, PIN_GMII1_COL = 0x0908U, PIN_GMII1_CRS = 0x090cU, PIN_GMII1_RXER = 0x0910U, PIN_GMII1_TXEN = 0x0914U, PIN_GMII1_RXDV = 0x0918U, PIN_GMII1_TXD3 = 0x091cU, PIN_GMII1_TXD2 = 0x0920U, PIN_GMII1_TXD1 = 0x0924U, PIN_GMII1_TXD0 = 0x0928U, PIN_GMII1_TXCLK = 0x092cU, PIN_GMII1_RXCLK = 0x0930U, PIN_GMII1_RXD3 = 0x0934U, PIN_GMII1_RXD2 = 0x0938U, PIN_GMII1_RXD1 = 0x093cU, PIN_GMII1_RXD0 = 0x0940U, PIN_RMII1_REFCLK = 0x0944U, PIN_MDIO_DATA = 0x0948U, PIN_MDIO_CLK = 0x094cU, PIN_SPI0_SCLK = 0x0950U, PIN_SPI0_D0 = 0x0954U, PIN_SPI0_D1 = 0x0958U, PIN_SPI0_CS0 = 0x095cU, PIN_SPI0_CS1 = 0x0960U, PIN_ECAP0_IN_PWM0_OUT = 0x0964U, PIN_UART0_CTSN = 0x0968U, PIN_UART0_RTSN = 0x096cU, PIN_UART0_RXD = 0x0970U, PIN_UART0_TXD = 0x0974U, PIN_UART1_CTSN = 0x0978U, PIN_UART1_RTSN = 0x097cU, PIN_UART1_RXD = 0x0980U, PIN_UART1_TXD = 0x0984U, PIN_I2C0_SDA = 0x0988U, PIN_I2C0_SCL = 0x098cU, PIN_MCASP0_ACLKX = 0x0990U, PIN_MCASP0_FSX = 0x0994U, PIN_MCASP0_AXR0 = 0x0998U, PIN_MCASP0_AHCLKR = 0x099cU, PIN_MCASP0_ACLKR = 0x09a0U, PIN_MCASP0_FSR = 0x09a4U, PIN_MCASP0_AXR1 = 0x09a8U, PIN_MCASP0_AHCLKX = 0x09acU, PIN_XDMA_EVENT_INTR0 = 0x09b0U, PIN_XDMA_EVENT_INTR1 = 0x09b4U, PIN_NRESETIN_OUT = 0x09b8U, PIN_PORZ = 0x09bcU, PIN_NNMI = 0x09c0U, PIN_OSC0_IN = 0x09c4U, PIN_OSC0_OUT = 0x09c8U, PIN_TMS = 0x09d0U, PIN_TDI = 0x09d4U, PIN_TDO = 0x09d8U, PIN_TCK = 0x09dcU, PIN_NTRST = 0x09e0U, PIN_EMU0 = 0x09e4U, PIN_EMU1 = 0x09e8U, PIN_OSC1_IN = 0x09ecU, PIN_OSC1_OUT = 0x09f0U, PIN_RTC_PORZ = 0x09f8U, PIN_PMIC_POWER_EN = 0x09fcU, PIN_EXT_WAKEUP = 0x0a00U, PIN_ENZ_KALDO_1P8V = 0x0a04U, PIN_USB0_DM = 0x0a08U, PIN_USB0_DP = 0x0a0cU, PIN_USB0_CE = 0x0a10U, PIN_USB0_ID = 0x0a14U, PIN_USB0_VBUS = 0x0a18U, PIN_USB0_DRVVBUS = 0x0a1cU, PIN_USB1_DM = 0x0a20U, PIN_USB1_DP = 0x0a24U, PIN_USB1_CE = 0x0a28U, PIN_USB1_ID = 0x0a2cU, PIN_USB1_VBUS = 0x0a30U, PIN_USB1_DRVVBUS = 0x0a34U, PIN_DDR_RESETN = 0x0a38U, PIN_DDR_CSN0 = 0x0a3cU, PIN_DDR_CKE = 0x0a40U, PIN_DDR_CK = 0x0a44U, PIN_DDR_NCK = 0x0a48U, PIN_DDR_CASN = 0x0a4cU, PIN_DDR_RASN = 0x0a50U, PIN_DDR_WEN = 0x0a54U, PIN_DDR_BA0 = 0x0a58U, PIN_DDR_BA1 = 0x0a5cU, PIN_DDR_BA2 = 0x0a60U, PIN_DDR_A0 = 0x0a64U, PIN_DDR_A1 = 0x0a68U, PIN_DDR_A2 = 0x0a6cU, PIN_DDR_A3 = 0x0a70U, PIN_DDR_A4 = 0x0a74U, PIN_DDR_A5 = 0x0a78U, PIN_DDR_A6 = 0x0a7cU, PIN_DDR_A7 = 0x0a80U, PIN_DDR_A8 = 0x0a84U, PIN_DDR_A9 = 0x0a88U, PIN_DDR_A10 = 0x0a8cU, PIN_DDR_A11 = 0x0a90U, PIN_DDR_A12 = 0x0a94U, PIN_DDR_A13 = 0x0a98U, PIN_DDR_A14 = 0x0a9cU, PIN_DDR_A15 = 0x0aa0U, PIN_DDR_ODT = 0x0aa4U, PIN_DDR_D0 = 0x0aa8U, PIN_DDR_D1 = 0x0aacU, PIN_DDR_D2 = 0x0ab0U, PIN_DDR_D3 = 0x0ab4U, PIN_DDR_D4 = 0x0ab8U, PIN_DDR_D5 = 0x0abcU, PIN_DDR_D6 = 0x0ac0U, PIN_DDR_D7 = 0x0ac4U, PIN_DDR_D8 = 0x0ac8U, PIN_DDR_D9 = 0x0accU, PIN_DDR_D10 = 0x0ad0U, PIN_DDR_D11 = 0x0ad4U, PIN_DDR_D12 = 0x0ad8U, PIN_DDR_D13 = 0x0adcU, PIN_DDR_D14 = 0x0ae0U, PIN_DDR_D15 = 0x0ae4U, PIN_DDR_DQM0 = 0x0ae8U, PIN_DDR_DQM1 = 0x0aecU, PIN_DDR_DQS0 = 0x0af0U, PIN_DDR_DQSN0 = 0x0af4U, PIN_DDR_DQS1 = 0x0af8U, PIN_DDR_DQSN1 = 0x0afcU, PIN_DDR_VREF = 0x0b00U, PIN_DDR_VTP = 0x0b04U, PIN_DDR_STRBEN0 = 0x0b08U, PIN_DDR_STRBEN1 = 0x0b0cU, PIN_AIN7 = 0x0b10U, PIN_AIN6 = 0x0b14U, PIN_AIN5 = 0x0b18U, PIN_AIN4 = 0x0b1cU, PIN_AIN3 = 0x0b20U, PIN_AIN2 = 0x0b24U, PIN_AIN1 = 0x0b28U, PIN_AIN0 = 0x0b2cU, PIN_VREFP = 0x0b30U, PIN_VREFN = 0x0b34U, PIN_IFORCE = 0x0b40U, PIN_VSENSE = 0x0b44U, PIN_TESTOUT = 0x0b48U, PIN_OFFSET_MAX = PIN_TESTOUT }; /* ========================================================================== */ /* Global Variables */ /* ========================================================================== */ /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gGpevmPinmuxData[]; /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gEvmskPinmuxData[]; /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gBbPinmuxData[]; /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gBbbPinmuxData[]; /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gIceV1PinmuxData[]; /** \brief Pinmux configuration data for the board. Auto-generated from Pinmux tool. */ extern pinmuxBoardCfg_t gIceV2PinmuxData[]; #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* AM335X_PIN_MUX_H_ */