U-Boot 2017.01-g340fb36f04 (Dec 23 2017 - 11:25:49 -0500) CPU : DRA722-GP ES2.0 Model: TI AM5718 IDK Board: AM571x IDK REV 1.3A DRAM: 1 GiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 ** First descriptor is NOT a primary desc on 1:1 ** *** Warning - bad CRC, using default environment GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid GPT *** GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 part_get_info_efi: *** ERROR: Invalid Backup GPT *** SCSI: SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... Found 0 device(s). Net: not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 reading boot.scr ** Unable to read file boot.scr ** reading uEnv.txt 574 bytes read in 3 ms (186.5 KiB/s) Loaded env from uEnv.txt Importing environment from mmc0 ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 3754896 bytes read in 255 ms (14 MiB/s) 104223 bytes read in 42 ms (2.4 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 8ffe3000, end 8ffff71e ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.59-ga75d8e9305 (gtbldadm@ubuntu-16) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #2 SMP PREEMPT Sat Dec 23 10:02:24 EST 2017 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt:Machine model: TI AM571x IDK-LCD-OSD-Display [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2_cma@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000099000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1_cma@99000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000be400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] OMAP4: Map 0x00000000bfd00000 to fe600000 for dram barrier [ 0.000000] DRA722 ES2.0 [ 0.000000] percpu: Embedded 13 pages/cpu @ef644000 s22156 r8192 d22900 u53248 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 210496 [ 0.000000] Kernel command line: console=ttyO2,115200n8 root=PARTUUID=000ab8ff-02 rw rootfstype=ext4 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 644564K/848896K available (8192K kernel code, 316K rwdata, 2488K rodata, 2048K init, 304K bss, 24108K reserved, 180224K cma-reserved, 234496K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) [ 0.000000] .data : 0xc1000000 - 0xc104f240 ( 317 kB) [ 0.000000] .bss : 0xc1051000 - 0xc109d130 ( 305 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000015] Switching to timer-based delay loop, resolution 162ns [ 0.000325] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000332] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000749] Console: colour dummy device 80x30 [ 0.000766] WARNING: Your 'console=ttyO2' has been replaced by 'ttyS2' [ 0.000772] This ensures that you still see kernel messages. Please [ 0.000778] update your kernel commandline. [ 0.000794] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000807] pid_max: default: 32768 minimum: 301 [ 0.000907] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001536] CPU: Testing write buffer coherency: ok [ 0.001744] /cpus/cpu@0 missing clock-frequency property [ 0.001758] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001772] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.080031] EFI services will not be available. [ 0.099918] Brought up 1 CPUs [ 0.099928] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.099935] CPU: All CPU(s) started in HYP mode. [ 0.099940] CPU: Virtualization extensions available. [ 0.100320] devtmpfs: initialized [ 0.130069] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.130325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.130342] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.133710] pinctrl core: initialized pinctrl subsystem [ 0.134565] NET: Registered protocol family 16 [ 0.135422] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.136411] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.360273] cpuidle: using governor ladder [ 0.390297] cpuidle: using governor menu [ 0.400573] OMAP GPIO hardware version 0.1 [ 0.415415] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 ! [ 0.440581] No ATAGs? [ 0.440600] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.440610] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.441013] omap4_sram_init:Unable to allocate sram needed to handle errata I688 [ 0.441023] omap4_sram_init:Unable to get sram pool needed to handle errata I688 [ 0.441581] OMAP DMA hardware revision 0.0 [ 0.520900] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.522227] edma 43300000.edma: memcpy is disabled [ 0.526995] edma 43300000.edma: TI EDMA DMA engine driver [ 0.530852] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.531036] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.531194] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.531350] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.534363] palmas 0-0058: Irq flag is 0x00000004 [ 0.562917] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 0.566031] SMPS3: supplied by VMAIN [ 0.569232] SMPS6: supplied by VMAIN [ 0.570926] SMPS7: supplied by VMAIN [ 0.572777] SMPS8: supplied by VMAIN [ 0.574066] SMPS9: supplied by VMAIN [ 0.574982] V3_3D: supplied by smps9 [ 0.575208] vtt_fixed: supplied by V3_3D [ 0.575311] LDO1: supplied by VMAIN [ 0.575485] random: fast init done [ 0.581399] LDO2: supplied by VMAIN [ 0.591282] LDO3: supplied by VMAIN [ 0.601299] LDO4: supplied by VMAIN [ 0.613336] LDO9: supplied by VMAIN [ 0.621672] LDOLN: supplied by VMAIN [ 0.631397] LDOUSB: supplied by VMAIN [ 0.644700] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 0.644910] media: Linux media interface: v0.10 [ 0.644959] Linux video capture interface: v2.00 [ 0.644993] pps_core: LinuxPPS API ver. 1 registered [ 0.645001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.645021] PTP clock support registered [ 0.645053] EDAC MC: Ver: 3.0.0 [ 0.651330] omap-mailbox 4883c000.mailbox: omap mailbox rev 0x400 [ 0.651629] omap-mailbox 4883e000.mailbox: omap mailbox rev 0x400 [ 0.651914] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.652100] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.652452] Advanced Linux Sound Architecture Driver Initialized. [ 0.660933] clocksource: Switched to clocksource arch_sys_counter [ 0.670595] NET: Registered protocol family 2 [ 0.671160] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.671224] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.671349] TCP: Hash tables configured (established 8192 bind 8192) [ 0.671400] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.671431] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.671616] NET: Registered protocol family 1 [ 0.691971] RPC: Registered named UNIX socket transport module. [ 0.691981] RPC: Registered udp transport module. [ 0.691987] RPC: Registered tcp transport module. [ 0.691994] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.692955] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.705662] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.713064] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.723815] NFS: Registering the id_resolver key type [ 0.723839] Key type id_resolver registered [ 0.723846] Key type id_legacy registered [ 0.723886] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.725306] bounce: pool size: 64 pages [ 0.725459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.725470] io scheduler noop registered [ 0.725477] io scheduler deadline registered [ 0.725608] io scheduler cfq registered (default) [ 0.731036] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128 [ 0.731109] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.731186] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.731197] pinctrl-single 4a002e8c.pinmux: 1 pins at pa fc002e8c size 4 [ 0.744428] dra7-pcie 51000000.pcie: Linked as a consumer to phy-4a094000.pciephy.3 [ 0.744759] OF: PCI: host bridge /ocp/axi@0/pcie@51000000 ranges: [ 0.744770] OF: PCI: No bus range found for /ocp/axi@0/pcie@51000000, using [bus 00-ff] [ 0.744802] OF: PCI: IO 0x20003000..0x20012fff -> 0x00000000 [ 0.744824] OF: PCI: MEM 0x20013000..0x2fffffff -> 0x20013000 [ 0.846002] dra7-pcie 51000000.pcie: link up [ 0.846178] dra7-pcie 51000000.pcie: PCI host bridge to bus 0000:00 [ 0.846191] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.846201] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.846211] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff] [ 0.846589] PCI: bus0: Fast back to back transfers disabled [ 0.848553] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.848648] PCI: bus1: Fast back to back transfers disabled [ 0.848919] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff] [ 0.848935] pci 0000:00:00.0: BAR 8: assigned [mem 0x20200000-0x202fffff] [ 0.848948] pci 0000:00:00.0: BAR 9: assigned [mem 0x20300000-0x203fffff pref] [ 0.848959] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff] [ 0.848972] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.848988] pci 0000:01:00.0: BAR 0: assigned [mem 0x20200000-0x2021ffff] [ 0.849012] pci 0000:01:00.0: BAR 1: assigned [mem 0x20220000-0x2023ffff] [ 0.849036] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2031ffff pref] [ 0.849047] pci 0000:01:00.1: BAR 0: assigned [mem 0x20240000-0x2025ffff] [ 0.849071] pci 0000:01:00.1: BAR 1: assigned [mem 0x20260000-0x2027ffff] [ 0.849094] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 0.849117] pci 0000:01:00.1: BAR 2: assigned [io 0x1020-0x103f] [ 0.849142] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.849152] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.849163] pci 0000:00:00.0: bridge window [mem 0x20200000-0x202fffff] [ 0.849173] pci 0000:00:00.0: bridge window [mem 0x20300000-0x203fffff pref] [ 0.849400] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.849410] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.849418] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt [ 0.850537] backlight supply power not found, using dummy regulator [ 0.906242] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 0.909584] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 301, base_baud = 3000000) is a 8250 [ 2.006101] console [ttyS2] enabled [ 2.011540] omap_rng 48090000.rng: OMAP Random Number Generator ver. 20 [ 2.018299] [drm] Initialized [ 2.023037] OMAP DSS rev 6.1 [ 2.026388] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops) [ 2.034912] omapdss_dss 58000000.dss: bound 58040000.encoder (ops hdmi5_component_ops) [ 2.045311] display supply vcc not found, using dummy regulator [ 2.222490] brd: module loaded [ 2.310877] loop: module loaded [ 2.318309] m25p80 spi0.0: s25fl256s1 (32768 Kbytes) [ 2.323403] 7 ofpart partitions found on MTD device spi0.0 [ 2.328912] Creating 7 MTD partitions on "spi0.0": [ 2.333741] 0x000000000000-0x000000040000 : "QSPI.SPL" [ 2.349905] 0x000000040000-0x000000140000 : "QSPI.u-boot" [ 2.366316] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os" [ 2.383302] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env" [ 2.399993] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1" [ 2.417395] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel" [ 2.433762] 0x0000009e0000-0x000002000000 : "QSPI.file-system" [ 2.451236] libphy: Fixed MDIO Bus: probed [ 2.510971] davinci_mdio 48485000.mdio: davinci mdio revision 1.6 [ 2.517097] davinci_mdio 48485000.mdio: detected phy mask fffffffc [ 2.537710] libphy: 48485000.mdio: probed [ 2.541798] davinci_mdio 48485000.mdio: phy[0]: device 48485000.mdio:00, driver Micrel KSZ9031 Gigabit PHY [ 2.551536] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 2.562016] cpsw 48484000.ethernet: Detected MACID = 5c:f8:21:14:26:d8 [ 2.569180] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 2.578666] cpsw 48484000.ethernet: cpsw: Detected MACID = 5c:f8:21:14:26:d9 [ 2.587280] mousedev: PS/2 mouse device common for all mice [ 2.593210] i2c /dev entries driver [ 2.603567] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.681373] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode [ 2.687754] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode [ 2.762030] ledtrig-cpu: registered to indicate activity on CPUs [ 2.782013] NET: Registered protocol family 10 [ 2.797131] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.811318] NET: Registered protocol family 17 [ 2.815930] Key type dns_resolver registered [ 2.820302] omap_voltage_late_init: Voltage driver support not added [ 2.841012] Power Management for TI OMAP4+ devices. [ 2.846102] Registering SWP/SWPB emulation handler [ 2.869657] dmm 4e000000.dmm: workaround for errata i878 in use [ 2.891403] dmm 4e000000.dmm: initialized all PAT entries [ 2.921935] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.928577] [drm] No driver support for vblank timestamp query. [ 2.960491] [drm] Enabling DMM ywrap scrolling [ 3.050665] Console: switching to colour frame buffer device 240x75 [ 3.062925] mmc1: new DDR MMC card at address 0001 [ 3.076504] omapdrm omapdrm.0: fb0: omapdrm frame buffer device [ 3.082576] mmcblk1: mmc1:0001 R1J56L 13.8 GiB [ 3.097323] mmcblk1boot0: mmc1:0001 R1J56L partition 1 4.00 MiB [ 3.103298] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.113637] hctosys: unable to open rtc device (rtc0) [ 3.118773] mmc0: new ultra high speed DDR50 SDHC card at address aaaa [ 3.126343] ALSA device list: [ 3.129515] No soundcards found. [ 3.132978] mmcblk0: mmc0:aaaa SU08G 7.40 GiB [ 3.133322] mmcblk1boot1: mmc1:0001 R1J56L partition 2 4.00 MiB [ 3.144481] mmcblk0: p1 p2 [ 7.798456] EXT4-fs (mmcblk0p2): recovery complete [ 7.805653] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.813834] VFS: Mounted root (ext4 filesystem) on device 179:50. [ 7.824082] devtmpfs: mounted [ 7.828486] Freeing unused kernel memory: 2048K [ 8.009445] systemd[1]: System time before build time, advancing clock. [ 8.038521] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 8.057053] systemd[1]: Detected architecture arm. Welcome to Arago 2017.10! [ 8.092060] systemd[1]: Set hostname to . [ 8.406306] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 8.441147] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 8.515482] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 8.551051] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 8.581128] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 8.611084] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 8.641213] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Reached target Remote File Systems. [ OK ] Listening on Journal Socket. [ OK ] Created slice User and Session Slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Created slice System Slice. Mounting Temporary Directory... [ OK ] Created slice system-getty.slice. Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Create Static Device Nodes in /dev... Starting alignment.service... Starting Load Kernel Modules... [ 9.138376] cmemk: loading out-of-tree module taints kernel. [ 9.145045] CMEMK module: reference Linux version 4.9.59 [ 9.154295] cmemk initialized Starting Journal Service... Starting Setup Virtual Console... [ 9.190594] cryptodev: driver 1.8 loaded. [ OK ] Reached target Slices. Mounting Debug File System... Starting Remount Root and Kernel File Systems... [ OK ] Mounted POSIX Message Queue File System. [ 9.286128] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ OK ] Mounted Debug File System. [ OK ] Mounted Temporary Directory. [ OK ] Started Journal Service. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started alignment.service. [ OK ] Started Load Kernel Modules. [ OK ] Started Setup Virtual Console. [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Mounting Configuration File System... Starting Apply Kernel Variables... Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /media/ram... Mounting /var/volatile... Starting Flush Journal to Persistent Storage... [ OK ] Mounted Configuration File System. [ OK ] Mounted /var/volatile. [ OK ] Mounted /media/ram. [ OK ] Started udev Kernel Device Manager. [ OK ] Started Apply Kernel Variables. [ 10.013325] systemd-journald[115]: Received request to flush runtime journal from PID 1 Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ 10.558621] omap-rproc 58820000.ipu: assigned reserved memory node ipu1_cma@9d000000 [ 10.662442] remoteproc remoteproc0: 58820000.ipu is available [ 10.734036] omap-rproc 55020000.ipu: assigned reserved memory node ipu2_cma@95800000 [ OK ] Started udev Coldplug all Devices. [ 10.774888] remoteproc remoteproc1: 55020000.ipu is available [ 10.853756] remoteproc remoteproc0: powering up 58820000.ipu [ 10.853766] remoteproc remoteproc0: Booting fw image dra7-ipu1-fw.xem4, size 4687356 [ 10.853879] omap-iommu 58882000.mmu: 58882000.mmu: version 2.1 [ 10.934909] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.934936] remoteproc remoteproc0: registered virtio0 (type 7) [ 10.934940] remoteproc remoteproc0: remote processor 58820000.ipu is now up [ 10.940435] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 [ 10.940554] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 [ 10.940642] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c [ 10.940721] virtio_rpmsg_bus virtio0: creating channel rpmsg-rpc addr 0x65 [ 10.999313] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 10.999315] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 10.999395] e1000e 0000:01:00.0: enabling device (0140 -> 0142) [ 10.999647] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.101630] ov2659 0-0030: Sensor detection failed (3030, 0) [ 11.154591] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc0 [ 11.176443] e1000e 0000:01:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 00:15:17:cf:b5:9a [ 11.176466] e1000e 0000:01:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 11.176552] e1000e 0000:01:00.0 eth2: MAC: 0, PHY: 4, PBA No: D56146-003 [ 11.176636] e1000e 0000:01:00.1: enabling device (0140 -> 0142) [ 11.176889] e1000e 0000:01:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 11.228444] omap_gpio 4805b000.gpio: Could not set line 7 debounce to 20000 microseconds (-22) [ 11.366465] e1000e 0000:01:00.1 eth3: (PCI Express:2.5GT/s:Width x1) 00:15:17:cf:b5:9b [ 11.366470] e1000e 0000:01:00.1 eth3: Intel(R) PRO/1000 Network Connection [ 11.366556] e1000e 0000:01:00.1 eth3: MAC: 0, PHY: 4, PBA No: D56146-003 [ 11.440663] input: EP05120M09 as /devices/platform/44000000.ocp/48070000.i2c/i2c-0/0-0038/input/input0 [ OK ] Reached target System Initialization. [ 12.040236] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 12.060547] omap-des 480a5000.des: will run requests pump with realtime priority [ 12.082059] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started Daily Cleanup of Temporary Directories. [ 12.129488] omap_rtc 48838000.rtc: rtc core: registered 48838000.rtc as rtc1 [ OK ] Reached target Timers. [ 12.171132] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ OK ] Listening on dropbear.socket. [ 12.198505] omap-rproc 40800000.dsp: assigned reserved memory node dsp1_cma@99000000 [ 12.211423] remoteproc remoteproc1: powering up 55020000.ipu [ 12.211433] remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3738980 [ 12.211510] omap-iommu 55082000.mmu: 55082000.mmu: version 2.1 [ 12.251148] vpe 489d0000.vpe: Device registered as /dev/video0 [ 12.413338] SCSI subsystem initialized [ OK ] Listening on RPCbind Server Activation Socket[ 12.494071] remoteproc remoteproc2: 40800000.dsp is available . [ 12.539544] CAN device driver interface [ 12.558944] virtio_rpmsg_bus virtio1: rpmsg host is online [ 12.558963] remoteproc remoteproc1: registered virtio1 (type 7) [ 12.558967] remoteproc remoteproc1: remote processor 55020000.ipu is now up [ 12.593714] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x65 [ 12.593833] virtio_rpmsg_bus virtio1: creating channel rpmsg-rpc addr 0x66 [ OK ] Listening on D-Bus System Message Bus Socket.[ 12.665766] vip 48970000.vip: loading firmware vpdma-1b8.bin [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activati[ 12.695780] ahci 4a140000.sata: SSS flag set, parallel bus scan disabled on Socket. [ 12.708398] vip 48970000.vip: VPDMA firmware loaded [[ 12.774007] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode OK ] Reached target Sockets. [[ 12.820839] ahci 4a140000.sata: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst OK ] Reached target Basic System. [ 12.842323] remoteproc remoteproc2: powering up 40800000.dsp [ 12.842332] remoteproc remoteproc2: Booting fw image dra7-dsp1-fw.xe66, size 4465836 [ 12.848992] omap_hwmod: mmu0_dsp1: _wait_target_disable failed [ 12.849024] omap-iommu 40d01000.mmu: 40d01000.mmu: version 3.0 [ 12.849066] omap-iommu 40d02000.mmu: 40d02000.mmu: version 3.0 [ 12.888714] virtio_rpmsg_bus virtio2: rpmsg host is online [ 12.888729] remoteproc remoteproc2: registered virtio2 (type 7) [ 12.888733] remoteproc remoteproc2: remote processor 40800000.dsp is now up [ 12.917374] virtio_rpmsg_bus virtio2: creating channel rpmsg-proto addr 0x3d Starting Login Service... [ 13.126329] scsi host0: ahci [ OK ] Started System Logging Service. [ 13.133959] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 344 [ OK ] Started D-Bus System Message Bus. [ 13.177078] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 13.215281] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 13.231739] omap-hdmi-audio omap-hdmi-audio.0.auto: snd-soc-dummy-dai <-> 58040000.encoder mapping ok Starting Network Service... [ 13.352936] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=fce3c000, irq=352) [ 13.388050] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 Starting Save/Restore Sound Card State... [ OK ] Started Kernel Logging Service. [ 13.435560] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 13.501233] net eth1: initializing cpsw version 1.15 (0) [ 13.501239] cpsw 48484000.ethernet: initialized cpsw ale version 1.4 [ 13.501243] cpsw 48484000.ethernet: ALE Table size 1024 [ 13.512157] ata1: SATA link down (SStatus 0 SControl 300) [ 13.627851] ti-pruss 4b200000.pruss: creating PRU cores and other child platform devices [ 13.645826] ti-pruss 4b280000.pruss: creating PRU cores and other child platform devices [ 13.704972] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=-1) [ 13.720979] davinci_mdio 4b2b2400.mdio: davinci mdio revision 1.6 [ 13.720983] libphy: 4b2b2400.mdio: probed [ 13.735392] davinci_mdio 4b2b2400.mdio: phy[0]: device 4b2b2400.mdio:00, driver TI TLK10X 10/100 Mbps PHY [ 13.735396] davinci_mdio 4b2b2400.mdio: phy[1]: device 4b2b2400.mdio:01, driver TI TLK10X 10/100 Mbps PHY [ 13.738612] remoteproc remoteproc3: 4b234000.pru0 is available [ 13.738655] pru-rproc 4b234000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b234000 probed successfully [ 13.738846] remoteproc remoteproc4: 4b238000.pru1 is available [ 13.738876] pru-rproc 4b238000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b226000/pruss@4b200000/pru@4b238000 probed successfully [ 13.739048] remoteproc remoteproc5: 4b2b4000.pru0 is available [ 13.739083] pru-rproc 4b2b4000.pru0: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b4000 probed successfully [ 13.739240] remoteproc remoteproc6: 4b2b8000.pru1 is available [ 13.739269] pru-rproc 4b2b8000.pru1: PRU rproc node /ocp/pruss_soc_bus@4b2a6000/pruss@4b280000/pru@4b2b8000 probed successfully [ 13.748799] pps pps0: new PPS source ptp0 [ 13.748808] cpts ptp bc clkid 0 [ 13.794529] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.860417] net eth0: initializing cpsw version 1.15 (0) [ 14.145802] Micrel KSZ9031 Gigabit PHY 48485000.mdio:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:00, irq=-1) [ 14.175302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.212637] prueth pruss2_eth: TI PRU ethernet (type 0) driver initialized Starting Avahi mDNS/DNS-SD Stack... Starting uim-sysfs.service... [ 15.075604] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 Starting Print notice about GPLv3 packages... [ 15.104560] omap-aes 4b700000.aes: will run requests pump with realtime priority Starting Telephony service... [ 15.185537] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 [ OK ] Started Network Service. [ OK ] Started Save/Restore Sound Card State. [ OK ] Found device /dev/ttyS2. [ 15.323605] Bluetooth: Core ver 2.22 [ 15.327241] NET: Registered protocol family 31 [ 15.411062] Bluetooth: HCI device and connection manager initialized [ 15.417457] Bluetooth: HCI socket layer initialized [ 15.494708] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: probing service rpc_example_2 with src 1024 dst 101 [ 15.494916] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: probing service dce-callback with src 1024 dst 101 [ 15.495068] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: probing service rpmsg-dce with src 1025 dst 102 [ 15.495424] rpmsg_rpc virtio0.rpmsg-rpc.-1.101: published functions = 8 [ 15.495581] rpmsg_rpc virtio1.rpmsg-rpc.-1.101: published functions = 4 [ 15.495713] rpmsg_rpc virtio1.rpmsg-rpc.-1.102: published functions = 9 [ 15.512649] e1000e 0000:01:00.1 enp1s0f1: renamed from eth3 [ 15.538259] e1000e 0000:01:00.0 enp1s0f0: renamed from eth2 [ 15.705806] NET: Registered protocol family 43 [ 16.052192] usbcore: registered new interface driver usbfs [ 16.052754] usbcore: registered new interface driver hub [ 16.053742] usbcore: registered new device driver usb [ 16.073242] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.073264] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 16.075620] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x02010010 [ 16.075660] xhci-hcd xhci-hcd.1.auto: irq 468, io mem 0x48890000 [ 16.082610] hub 1-0:1.0: USB hub found [ 16.082645] hub 1-0:1.0: 1 port detected [ 16.082928] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.084572] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 16.084639] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.088879] hub 2-0:1.0: USB hub found [ 16.088906] hub 2-0:1.0: 1 port detected [ 16.176091] remoteproc remoteproc5: powering up 4b2b4000.pru0 [ 16.178889] remoteproc remoteproc5: Booting fw image ti-pruss/am57xx-pru0-prueth-fw.elf, size 5028 [ 16.179013] ti-pruss 4b280000.pruss: configured system_events = 0x0000060000500000 intr_channels = 0x00000095 host_intr = 0x00000115 [ 16.179018] remoteproc remoteproc5: remote processor 4b2b4000.pru0 is now up [ 16.179041] net eth4: started [ 16.179157] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready [ 16.216807] remoteproc remoteproc6: powering up 4b2b8000.pru1 [ 16.218475] remoteproc remoteproc6: Booting fw image ti-pruss/am57xx-pru1-prueth-fw.elf, size 5060 [ 16.218600] ti-pruss 4b280000.pruss: configured system_events = 0x0060000000a00000 intr_channels = 0x0000012a host_intr = 0x0000022a [ 16.218605] remoteproc remoteproc6: remote processor 4b2b8000.pru1 is now up [ 16.218629] net eth5: started [ 16.219332] IPv6: ADDRCONF(NETDEV_UP): eth5: link is not ready [ 16.893906] Bluetooth: L2CAP socket layer initialized [ 16.926195] Bluetooth: SCO socket layer initialized [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Telephony service. [ OK ] Started Login Service. [ OK ] Reached target Sound Card. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-systemd\x2dbacklight.slice. Starting Load/Save Screen Backlight...htness of backlight:backlight... [ OK ] Reached target Network. Starting Lightning Fast Webserver With Light System Requirements... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting Simple Network Management Protocol (SNMP) Daemon.... Starting Permit User Sessions... Starting Network Name Resolution... Starting Enable and configure wl18xx bluetooth stack... [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight. [ OK ] Started Lightning Fast Webserver With Light System Requirements. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Network Name Resolution. [ OK ] Started Synchronize System and HW clocks. [ OK ] Started Enable and configure wl18xx bluetooth stack. [ 18.091621] NET: Registered protocol family 15 [ 18.254722] random: crng init done [ 18.312724] Initializing XFRM netlink socket *************************************************************** *************************************************************** NOTICE: This file system contains the following GPLv3 packages: autoconf binutils-dev binutils bison-dev bison cifs-utils cpp-symlinks cpp dosfstools g++-symlinks g++ gawk-dev gawk gcc-symlinks gcc gdb gdbc6x gdbserver glmark2 gstreamer1.0-libav hidapi libcairo-perf-utils libgmp10 libidn11 libmpc3 libmpfr4 libreadline-dev libreadline6 m4-dev m4 make nettle parted swig-dev swig If you do not wish to distribute GPLv3 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Started Print notice about GPLv3 packages. [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Started uim-sysfs.service. Starting rc.pvr.service... [ 19.387927] PVR_K: UM DDK-(3699939) and KM DDK-(3699939) match. [ OK ] [ OK ] Started rc.pvr.service. Starting weston.service... [ OK ] Started weston.service. Starting telnetd.service... Starting tiipclad-daemon.service... [ OK ] Started telnetd.service. [ OK ] Started tiipclad-daemon.service. Starting thttpd.service... [ OK ] Started thttpd.service. Starting rng-tools.service... [ OK ] Started rng-tools.service. Starting gdbserverproxy.service... [ OK ] Started gdbserverproxy.service. Starting matrix-gui-2.0.service... [ OK ] Started matrix-gui-2.0.service. Starting thermal-zone-init.service... [ OK ] Started thermal-zone-init.service. [ OK ] Reached target Multi-User System. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project http://arago-project.org am57xx-evm ttyS2 Arago 2017.10 am57xx-evm ttyS2 am57xx-evm login: root root@am57xx-evm:~# uname -a Linux am57xx-evm 4.9.59-ga75d8e9305 #2 SMP PREEMPT Sat Dec 23 10:02:24 EST 2017 armv7l GNU/Linux root@am57xx-evm:~# root@am57xx-evm:~# root@am57xx-evm:~# lspci -nn 00:00.0 PCI bridge [0604]: Texas Instruments Multicore DSP+ARM KeyStone II SOC [104c:8888] (rev 01) 01:00.0 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) 01:00.1 Ethernet controller [0200]: Intel Corporation 82571EB Gigabit Ethernet Controller [8086:105e] (rev 06) root@am57xx-evm:~#