ïÓ-Boot SPL 2021.01 (Mar 12 2024 - 12:52:09 +0900) Resetting on cold boot to workaround ErrataID:i2331 resetting ... U-Boot SPL 2021.01 (Mar 12 2024 - 12:52:09 +0900) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') SPL initial stack usage: 13424 bytes Trying to boot from MMC2 Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Warning: Did not detect image signing certificate. Skipping authentication to prevent boot failure. This will fail on Security Enforcing(HS-SE) devices Authentication passed Authentication passed Starting ATF on ARM64 core... NOTICE: BL31: v2.8(release):v2.8-767-gffd74f661-dirty NOTICE: BL31: Built : 12:56:29, Mar 12 2024 U-Boot SPL 2021.01 (Mar 12 2024 - 12:57:58 +0900) SYSFW ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') Trying to boot from MMC2 Authentication passed Authentication passed U-Boot 2021.01 (Mar 12 2024 - 12:57:58 +0900) SoC: AM64X SR2.0 HS-FS Model: Texas Instruments AM642 EVM Board: AM64-EVM rev C DRAM: 2 GiB NAND: 0 MiB MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@2800000 Out: serial@2800000 Err: serial@2800000 Unidentified board claims AM64-EVM in eeprom header Net: eth0: ethernet@8000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 Failed to load 'boot.scr' 662 bytes read in 2 ms (323.2 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... 18680320 bytes read in 777 ms (22.9 MiB/s) 56196 bytes read in 5 ms (10.7 MiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Device Tree to 000000008feef000, end 000000008fffffff ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.10.168 (xinagaki@debian) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Tue Mar 12 12:59:26 JST 2024 [ 0.000000] Machine model: Texas Instruments AM642 EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a57fffff] [ 0.000000] node 0: [mem 0x00000000a5800000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] cma: Reserved 512 MiB at 0x00000000dd000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 22 pages/cpu s50008 r8192 d31912 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=fc40000.spi.0:1m(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=427edd0b-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1399240K/2097152K available (11008K kernel code, 1154K rwdata, 4184K rodata, 1792K init, 430K bss, 173624K reserved, 524288K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001840000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000005] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008559] Console: colour dummy device 80x25 [ 0.013149] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023823] pid_max: default: 32768 minimum: 301 [ 0.028645] LSM: Security Framework initializing [ 0.033434] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.041009] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.050864] rcu: Hierarchical SRCU implementation. [ 0.056086] Platform MSI: msi-controller@1820000 domain created [ 0.062447] PCI/MSI: /bus@f4000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.071737] EFI services will not be available. [ 0.076666] smp: Bringing up secondary CPUs ... [ 0.082270] Detected VIPT I-cache on CPU1 [ 0.082315] GICv3: CPU1: found redistributor 1 region 0:0x0000000001860000 [ 0.082330] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [ 0.082397] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.082537] smp: Brought up 1 node, 2 CPUs [ 0.111916] SMP: Total of 2 processors activated. [ 0.116728] CPU features: detected: 32-bit EL0 Support [ 0.122000] CPU features: detected: CRC32 instructions [ 0.135313] CPU: All CPU(s) started at EL2 [ 0.139517] alternatives: patching kernel code [ 0.145239] devtmpfs: initialized [ 0.156615] KASLR disabled due to lack of seed [ 0.161403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.171374] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.195599] pinctrl core: initialized pinctrl subsystem [ 0.201640] DMI not present or invalid. [ 0.206300] NET: Registered protocol family 16 [ 0.212661] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.220050] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.228157] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.236942] thermal_sys: Registered thermal governor 'step_wise' [ 0.236949] thermal_sys: Registered thermal governor 'power_allocator' [ 0.243674] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.257365] ASID allocator initialised with 65536 entries [ 0.290962] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.297843] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.304705] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.311556] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.319780] cryptd: max_cpu_qlen set to 1000 [ 0.327646] k3-chipinfo 43000014.chipid: Family:AM64X rev:SR2.0 JTAGID[0x1bb3802f] Detected [ 0.336856] vsys_5v0: supplied by evm_12v0 [ 0.341541] vsys_3v3: supplied by evm_12v0 [ 0.346416] vddb_3v3_display: supplied by vsys_3v3 [ 0.352563] iommu: Default domain type: Translated [ 0.358008] SCSI subsystem initialized [ 0.362672] mc: Linux media interface: v0.10 [ 0.367075] videodev: Linux video capture interface: v2.00 [ 0.372777] pps_core: LinuxPPS API ver. 1 registered [ 0.377850] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.387202] PTP clock support registered [ 0.391243] EDAC MC: Ver: 3.0.0 [ 0.395349] omap-mailbox 29020000.mailbox: omap mailbox rev 0x66fc9100 [ 0.402277] omap-mailbox 29040000.mailbox: omap mailbox rev 0x66fc9100 [ 0.409089] omap-mailbox 29060000.mailbox: omap mailbox rev 0x66fc9100 [ 0.416630] FPGA manager framework [ 0.420259] Advanced Linux Sound Architecture Driver Initialized. [ 0.427561] clocksource: Switched to clocksource arch_sys_counter [ 0.434074] VFS: Disk quotas dquot_6.6.0 [ 0.438153] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.451412] NET: Registered protocol family 2 [ 0.456201] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.465179] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.473978] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.482205] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.489948] TCP: Hash tables configured (established 16384 bind 16384) [ 0.496878] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.503778] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.511270] NET: Registered protocol family 1 [ 0.516337] RPC: Registered named UNIX socket transport module. [ 0.522413] RPC: Registered udp transport module. [ 0.527220] RPC: Registered tcp transport module. [ 0.532032] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.538625] PCI: CLS 0 bytes, default 64 [ 0.543383] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.556378] Initialise system trusted keyrings [ 0.561259] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.572249] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.578927] NFS: Registering the id_resolver key type [ 0.584161] Key type id_resolver registered [ 0.588438] Key type id_legacy registered [ 0.592611] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.599463] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.607276] 9p: Installing v9fs 9p2000 file system support [ 0.655659] Key type asymmetric registered [ 0.659863] Asymmetric key parser 'x509' registered [ 0.664904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.672474] io scheduler mq-deadline registered [ 0.677104] io scheduler kyber registered [ 0.683679] pinctrl-single 4084000.pinctrl: 33 pins, size 132 [ 0.690090] pinctrl-single f4000.pinctrl: 180 pins, size 720 [ 0.697043] pinctrl-single a40000.timesync-router: 512 pins, size 2048 [ 0.713585] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.736304] brd: module loaded [ 0.747376] loop: module loaded [ 0.751693] megasas: 07.714.04.00-rc1 [ 0.760084] tun: Universal TUN/TAP device driver, 1.6 [ 0.766037] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.772457] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.778571] sky2: driver version 1.30 [ 0.783705] VFIO - User Level meta-driver version: 0.3 [ 0.790216] i2c /dev entries driver [ 0.795315] sdhci: Secure Digital Host Controller Interface driver [ 0.801693] sdhci: Copyright(c) Pierre Ossman [ 0.806876] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.814023] ledtrig-cpu: registered to indicate activity on CPUs [ 0.820688] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.829017] optee: probing for conduit method. [ 0.833633] optee: revision 3.19 (9446de32) [ 0.833985] optee: dynamic shared memory is enabled [ 0.843651] optee: initialized driver [ 0.850289] NET: Registered protocol family 17 [ 0.855071] 9pnet: Installing 9P2000 support [ 0.859552] Key type dns_resolver registered [ 0.864154] Loading compiled-in X.509 certificates [ 0.885929] ti-sci 44043000.dmsc: lpm region is required for suspend but not provided. [ 0.894140] ti-sci 44043000.dmsc: ABI: 3.1 (firmware rev 0x0008 '8.6.4--v08.06.04 (Chill Capybar') [ 0.952276] omap-gpmc 3b000000.memory-controller: GPMC revision 6.0 [ 0.958745] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 0.967288] omap_i2c 20000000.i2c: bus 0 rev0.12 at 100 kHz [ 0.975101] pca953x 1-0022: supply vcc not found, using dummy regulator [ 0.982052] pca953x 1-0022: using AI [ 1.037022] Console: switching to mono frame buffer device 12x2 [ 1.071895] ssd1307fb 1-003c: fb0: Solomon SSD1307 framebuffer device registered, using 192 bytes of video memory [ 1.082603] omap_i2c 20010000.i2c: bus 1 rev0.12 at 400 kHz [ 1.089680] omap_i2c 20020000.i2c: bus 2 rev0.12 at 100 kHz [ 1.096746] omap_i2c 20030000.i2c: bus 3 rev0.12 at 100 kHz [ 1.103021] ti-sci-intr bus@f4000:bus@4000000:interrupt-controller1: Interrupt Router 5 domain created [ 1.112995] ti-sci-intr bus@f4000:interrupt-controller0: Interrupt Router 3 domain created [ 1.121862] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.142621] j721e-pcie f102000.pcie: host bridge /bus@f4000/pcie@f102000 ranges: [ 1.150306] j721e-pcie f102000.pcie: IO 0x0068001000..0x0068010fff -> 0x0068001000 [ 1.158598] j721e-pcie f102000.pcie: MEM 0x0068011000..0x006fffffff -> 0x0068011000 [ 1.166881] j721e-pcie f102000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x0000000000 [ 2.179582] j721e-pcie f102000.pcie: PCI host bridge to bus 0000:00 [ 2.186003] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.191614] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x68001000-0x68010fff]) [ 2.201304] pci_bus 0000:00: root bus resource [mem 0x68011000-0x6fffffff] [ 2.208370] pci 0000:00:00.0: [104c:b010] type 01 class 0x060400 [ 2.214524] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0xfffffffff 64bit pref] [ 2.222074] pci 0000:00:00.0: supports D1 [ 2.226172] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.234558] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.245313] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 2.245360] pci 0000:00:00.0: BAR 0: no space for [mem size 0x1000000000 64bit pref] [ 2.245366] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x1000000000 64bit pref] [ 2.245374] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.246021] pcieport 0000:00:00.0: PME: Signaling with IRQ 44 [ 2.246944] ti-udma 485c0100.dma-controller: Number of rings: 68 [ 2.248410] ti-udma 485c0100.dma-controller: Channels: 24 (bchan: 12, tchan: 6, rchan: 6) [ 2.297852] ti-udma 485c0000.dma-controller: Number of rings: 288 [ 2.312485] ti-udma 485c0000.dma-controller: Channels: 44 (tchan: 29, rchan: 15) [ 2.323452] printk: console [ttyS2] disabled [ 2.327912] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 16, base_baud = 3000000) is a 8250 [ 2.336677] printk: console [ttyS2] enabled [ 2.336677] printk: console [ttyS2] enabled [ 2.345122] printk: bootconsole [ns16550a0] disabled [ 2.345122] printk: bootconsole [ns16550a0] disabled [ 2.360070] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 2.365089] 7 cmdlinepart partitions found on MTD device fc40000.spi.0 [ 2.371611] Creating 7 MTD partitions on "fc40000.spi.0": [ 2.377007] 0x000000000000-0x000000100000 : "ospi.tiboot3" [ 2.383855] 0x000000100000-0x000000300000 : "ospi.tispl" [ 2.390395] 0x000000300000-0x000000700000 : "ospi.u-boot" [ 2.396959] 0x000000700000-0x000000740000 : "ospi.env" [ 2.403301] 0x000000740000-0x000000780000 : "ospi.env.backup" [ 2.410254] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 2.416843] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 2.441709] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 2.487564] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.496713] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 2.504947] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA00903, cpsw version 0x6BA80903 Ports: 3 quirks:00000006 [ 2.517818] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.4 [ 2.524947] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 2.531665] pps pps0: new PPS source ptp0 [ 2.536110] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1 [ 2.546749] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 16 [ 2.557569] am65-cpts 39000000.cpts: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [ 2.566697] k3-j72xx-soc-thermal b00000.temperature-sensor: invalid resource [ 2.573811] k3-j72xx-soc-thermal: probe of b00000.temperature-sensor failed with error -22 [ 2.585608] mmc1: CQHCI version 5.10 [ 2.585669] gpio-mux mux-controller: 2-way mux-controller registered [ 2.604177] vdd_mmc1: supplied by vsys_3v3 [ 2.616285] debugfs: Directory 'pd:114' with parent 'pm_genpd' already present! [ 2.616328] mmc0: CQHCI version 5.10 [ 2.635601] mmc1: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 2.636778] ALSA device list: [ 2.646220] No soundcards found. [ 2.668985] mmc0: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 2.677287] Waiting for root device PARTUUID=427edd0b-02... [ 2.731113] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 2.738670] mmcblk0: mmc0:aaaa SD128 119 GiB [ 2.745722] mmcblk0: p1 p2 [ 2.752056] mmc1: Command Queue Engine enabled [ 2.756535] mmc1: new HS200 MMC card at address 0001 [ 2.762334] mmcblk1: mmc1:0001 S0J56X 14.8 GiB [ 2.767257] mmcblk1boot0: mmc1:0001 S0J56X partition 1 31.5 MiB [ 2.773513] mmcblk1boot1: mmc1:0001 S0J56X partition 2 31.5 MiB [ 2.779707] mmcblk1rpmb: mmc1:0001 S0J56X partition 3 4.00 MiB, chardev (237:0) [ 2.791377] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.799643] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.806709] devtmpfs: mounted [ 2.811089] Freeing unused kernel memory: 1792K [ 2.819641] Run /sbin/init as init process [ 2.986280] systemd[1]: System time before build time, advancing clock. [ 3.041545] NET: Registered protocol family 10 [ 3.047317] Segment Routing with IPv6 [ 3.068539] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 3.100528] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 3.140906] systemd[1]: Hostname set to . [ 3.261543] systemd-sysv-generator[153]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.287983] systemd-sysv-generator[153]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.288255] systemd-sysv-generator[153]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.519748] systemd[1]: Configuration file /lib/systemd/system/ti-apps-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.649395] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 3.740106] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 3.841605] systemd[1]: Queued start job for default target Graphical Interface. [ 3.906152] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 3.931368] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 3.955183] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 3.978716] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.000256] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password cts to Console Directory Watch. [ 4.024163] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Rcuests to Wall Directory Watch. [ 4.048246] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 4.063898] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.083876] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 4.099904] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 4.122494] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 4.143885] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 4.171742] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 4.192320] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 4.225852] systemd[1]: Journal Audit Socket was skipped because of a failed condition check (ConditionSecurity=audit). [ 4.237731] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 4.260713] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.281069] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.304799] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.328462] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.352576] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 4.382577] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 4.409834] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.438289] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 4.456371] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 4.476522] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 4.499508] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 4.530505] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 4.554083] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 4.581834] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 4.598687] fuse: init (API version 7.32) [ 4.615198] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 4.649070] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 4.680135] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 4.693758] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 4.706702] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 4.722659] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.754970] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.787196] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network cts from Kernel command line... [ 4.818909] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.855402] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 4.899421] systemd[1]: Started Start psplash boot splash screen. [ OK ] Started Start psplash boot splash s[ 4.914797] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) creen. [ 4.932595] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 4.951991] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... [ OK ] Started Start psplash-systcprogress communication helper. Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 5.368992] systemd-journald[166]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... Starting Rule-based Managecfor Device Events and Files... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. Starting Weston socket... Starting Console System Startup Logging... Starting D-Bus System Message Bus... Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Finished Console System Startup Logging. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Reached target Socket Units. [ 7.267893] random: dbus-broker-lau: uninitialized urandom read (8 bytes read) [ 7.281495] random: dbus-broker-lau: uninitialized urandom read (8 bytes read) [ 7.292392] random: dbus-broker-lau: uninitialized urandom read (8 bytes read) [ 7.320478] random: crng init done [ 7.324044] random: 2 urandom warning(s) missed due to ratelimiting [ OK ] Finished Load/Save Random Seed. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting DEMO... [ 7.484936] 93xx46 spi1.0: 16-bit eeprom Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... Starting PulseAudio Sound System... Starting Expand the rootfscll size of the boot device.... [ OK ] Started strongSwan IPsec IcIKEv2 daemon using ipsec.conf. Starting User Login Management... [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Started ti-apps-launcher service. [ 7.745301] Bluetooth: Core ver 2.22 Starting Rotate log files... [ 7.761353] NET: Registered protocol family 31 [ 7.765895] Bluetooth: HCI device and connection manager initialized [ 7.778480] Bluetooth: HCI socket layer initialized [ 7.783474] Bluetooth: L2CAP socket layer initialized [ 7.795865] Bluetooth: SCO socket layer initialized [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ OK ] Created slice Slice /system/systemd-backlight. [ OK ] Reached target Preparation for Network. Starting Load/Save Screen cess of backlight:ssd1307fb0... Starting Network Configuration... [ OK ] Started Telephony service. [ OK ] Started DEMO. [ OK ] Finished Load/Save Screen ctness of backlight:ssd1307fb0. [ OK ] Finished Expand the rootfscfull size of the boot device.. [ OK ] Found device /dev/ttyS2. [ 8.646468] CAN device driver interface [ 8.656534] Initializing XFRM netlink socket [ OK ] Started PulseAudio Sound System. [ 8.936380] davinci_mdio 300b2400.mdio: Configuring MDIO in manual mode [ 8.988147] davinci_mdio 300b2400.mdio: davinci mdio revision 1.7, bus freq 1000000 [ 9.021275] davinci_mdio 300b2400.mdio: phy[15]: device 300b2400.mdio:0f, driver TI DP83869 [ 9.770778] platform 78000000.r5f: configured R5F for remoteproc mode [ 9.854775] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@a0000000 [ 10.034102] remoteproc remoteproc0: 78000000.r5f is available [ 10.064761] remoteproc remoteproc0: Direct firmware load for am64-main-r5f0_0-fw failed with error -2 [ 10.079739] remoteproc remoteproc0: powering up 78000000.r5f [ 10.087542] remoteproc remoteproc0: Direct firmware load for am64-main-r5f0_0-fw failed with error -2 [ 10.102702] remoteproc remoteproc0: request_firmware failed: -2 [ 10.112743] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.157400] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK ] Finished Rotate log files. [ 10.309026] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@a4000000 [ 10.356045] platform 78200000.r5f: configured R5F for remoteproc mode [ OK ] Started Network Configuration. Starting Network Name Resolution... [ OK ] Started User Login Management. [ 10.575197] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [ 10.591068] platform 78200000.r5f: assigned reserved memory node r5f-dma-memory@a1000000 [ 10.623513] am65-cpsw-nuss 8000000.ethernet eth1: PHY [0.1:03] driver [TI DP83869] (irq=POLL) [ 10.648753] remoteproc remoteproc1: 78200000.r5f is available [ 10.654755] am65-cpsw-nuss 8000000.ethernet eth1: configuring for phy/rgmii-rxid link mode [ 10.654953] remoteproc remoteproc1: Direct firmware load for am64-main-r5f0_1-fw failed with error -2 [ 10.676569] remoteproc remoteproc1: powering up 78200000.r5f [ 10.685933] remoteproc remoteproc1: Direct firmware load for am64-main-r5f0_1-fw failed with error -2 [ 10.699671] remoteproc remoteproc1: request_firmware failed: -2 [ 10.719505] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) [ 10.732102] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode [ 10.822554] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [ 10.885422] m_can_platform 20701000.can: m_can device registered (irq=36, version=32) [ 10.930117] platform 78400000.r5f: configured R5F for remoteproc mode [ 10.934186] m_can_platform 20711000.can: m_can device registered (irq=38, version=32) [ 10.950532] remoteproc remoteproc2: 5000000.m4fss is available [ 10.963257] remoteproc remoteproc2: Direct firmware load for am64-mcu-m4f0_0-fw failed with error -2 [ 10.975201] remoteproc remoteproc2: powering up 5000000.m4fss [ 10.981167] remoteproc remoteproc2: Direct firmware load for am64-mcu-m4f0_0-fw failed with error -2 [ 10.993708] remoteproc remoteproc2: request_firmware failed: -2 [ 11.108538] platform 78400000.r5f: assigned reserved memory node r5f-dma-memory@a2000000 [ 11.217843] remoteproc remoteproc3: 78400000.r5f is available [ 11.224152] remoteproc remoteproc3: Direct firmware load for am64-main-r5f1_0-fw failed with error -2 [ 11.234193] remoteproc remoteproc3: powering up 78400000.r5f [ 11.240142] remoteproc remoteproc3: Direct firmware load for am64-main-r5f1_0-fw failed with error -2 [ 11.249429] remoteproc remoteproc3: request_firmware failed: -2 [ 11.362845] platform 78600000.r5f: configured R5F for remoteproc mode [ 11.500322] platform 78600000.r5f: assigned reserved memory node r5f-dma-memory@a3000000 [ 11.554833] remoteproc remoteproc5: 30034000.pru is available [ 11.563092] remoteproc remoteproc6: 30004000.rtu is available [ 11.571679] remoteproc remoteproc7: 3000a000.txpru is available [ 11.578357] remoteproc remoteproc8: 30038000.pru is available [ 11.664838] remoteproc remoteproc9: 30006000.rtu is available [ 11.698691] remoteproc remoteproc10: 3000c000.txpru is available [ 11.832338] remoteproc remoteproc4: 78600000.r5f is available [ 11.838891] remoteproc remoteproc4: Direct firmware load for am64-main-r5f1_1-fw failed with error -2 [ 11.848199] remoteproc remoteproc4: powering up 78600000.r5f [ 11.856733] remoteproc remoteproc4: Direct firmware load for am64-main-r5f1_1-fw failed with error -2 [ 11.871646] remoteproc remoteproc4: request_firmware failed: -2 [ 11.883311] remoteproc remoteproc11: 300b4000.pru is available [ 11.890066] remoteproc remoteproc12: 30084000.rtu is available [ 11.896799] remoteproc remoteproc13: 3008a000.txpru is available [ 11.903528] remoteproc remoteproc14: 300b8000.pru is available [ 11.912512] remoteproc remoteproc15: 30086000.rtu is available [ 11.920206] remoteproc remoteproc16: 3008c000.txpru is available [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Macent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Waylandcositor, as a system service... [ OK ] Started Avahi mDNS/DNS-SD Stack. [FAILED] Failed to start Synchronize System and HW clocks. See 'systemctl status sync-clocks.service' for details. [ OK ] Finished Enable and configure wl18xx bluetooth stack. Starting User Database Manager... [ OK ] Created slice Slice /system/systemd-coredump. [ OK ] Started Process Core Dump (PID 527/UID 0). [ OK ] Started Simple Network Mancement Protocol (SNMP) Daemon.. [ OK ] Started User Database Manager. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ OK ] Started containerd container runtime. [FAILED] Failed to start Weston, a cmpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Waylandcositor, as a system service... [ OK ] Started Session c2 of User weston. [FAILED] Failed to start Weston, a cmpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Waylandcositor, as a system service... [ OK ] Started Session c3 of User weston. [FAILED] Failed to start Weston, a cmpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Waylandcositor, as a system service... [ OK ] Started Session c4 of User weston. [FAILED] Failed to start Weston, a cmpositor, as a system service. See 'systemctl status weston.service' for details. Starting Weston, a Waylandcositor, as a system service... *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp dosfstools elfutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gnu-config grub-common grub-editenv grub-efi gzip hidapi less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libeigen-dev libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-examples libqt5charts-plugins libqt5charts-qmlplugins libqt5charts5 libqt5sensors-plugins libqt5sensors-qmlplugins libqt5sensors5 libqt5serialport-examples libqt5serialport-plugins libqt5serialport-qmlplugins libqt5serialport5 libqt5svg-examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libqt5webchannel-plugins libqt5webchannel-qmlplugins libqt5webchannel5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring2 m4-dev m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples qtmultimedia-plugins qtmultimedia-qmlplugins qtmultimedia qtquick3d-plugins qtquick3d-qmlplugins qtquick3d qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project am62xx-lp-evm - Arago 2023.10 am62xx-lp-evm - am62xx-lp-evm login: [ 19.140938] TI DP83869 300b2400.mdio:0f: attached PHY driver [TI DP83869] (mii_bus:phy_addr=300b2400.mdio:0f, irq=POLL) [ 19.162149] icssg-prueth icssg1-eth: TI PRU ethernet driver initialized: single EMAC mode [ 19.263277] usbcore: registered new interface driver usbfs [ 19.269095] usbcore: registered new interface driver hub [ 19.291503] usbcore: registered new device driver usb [ 19.433462] remoteproc remoteproc11: powering up 300b4000.pru [ 19.443876] remoteproc remoteproc11: Direct firmware load for ti-pruss/am65x-sr2-pru0-prueth-fw.elf failed with error -2 [ 19.467755] remoteproc remoteproc11: request_firmware failed: -2 [ 19.476647] icssg-prueth icssg1-eth: failed to boot PRU0: -2 am62xx-lp-evm login: root root@am62xx-lp-evm:~# ls Set_Composite_USBD_new_mod.sh root@am62xx-lp-evm:~# ./Set_Composite_USBD_new_mod.sh [ 31.440681] using random self ethernet address [ 31.445248] using random host ethernet address [ 32.498810] usb0: HOST MAC 1e:0e:d6:e5:85:ea [ 32.506063] usb0: MAC 2e:ce:fd:dd:be:0d [ 33.202003] configfs-gadget gadget: Using interface 2 [ 33.207475] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 33.215345] configfs-gadget gadget: Using interface 2 eth0: flags=4099 mtu 1500 ether 34:08:e1:80:a3:19 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth1: flags=4099 mtu 1500 ether 70:ff:76:1e:a2:15 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 93 bytes 7735 (7.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 93 bytes 7735 (7.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 usb0: flags=4163 mtu 1500 inet 10.10.10.10 netmask 255.0.0.0 broadcast 10.255.255.255 inet6 fe80::1022:c4ff:fe8d:7cbf prefixlen 64 scopeid 0x20 ether 12:22:c4:8d:7c:bf txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 14 bytes 2160 (2.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@am62xx-lp-evm:~# ls /dev/g g_printer0 gpiochip0 gpiochip1 gpiochip2 gpiochip3 root@am62xx-lp-evm:~# [ 141.510441] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 141.528441] Bridge firewalling registered root@am62xx-lp-evm:~# root@am62xx-lp-evm:~# while true; do cat /boot/Image.gz > /dev/g_printer0 ; sleep 1; done [ 167.211587] omap_i2c 20010000.i2c: controller timed out [ 167.211613] ssd1307fb 1-003c: Couldn't send I2C command. [ 168.267609] omap_i2c 20010000.i2c: controller timed out [ 168.267634] ssd1307fb 1-003c: Couldn't send I2C command. [ 169.323574] omap_i2c 20010000.i2c: controller timed out [ 169.323601] ssd1307fb 1-003c: Couldn't send I2C command. [ 170.379573] omap_i2c 20010000.i2c: controller timed out [ 170.379598] ssd1307fb 1-003c: Couldn't send I2C command. [ 171.436207] omap_i2c 20010000.i2c: controller timed out [ 171.436230] ssd1307fb 1-003c: Couldn't send I2C command. [ 172.491578] omap_i2c 20010000.i2c: controller timed out [ 172.491601] ssd1307fb 1-003c: Couldn't send I2C command. [ 173.547570] omap_i2c 20010000.i2c: controller timed out [ 173.547593] ssd1307fb 1-003c: Couldn't send I2C command. [ 174.604289] omap_i2c 20010000.i2c: controller timed out [ 174.604311] ssd1307fb 1-003c: Couldn't send I2C command. [ 175.659579] omap_i2c 20010000.i2c: controller timed out [ 175.659600] ssd1307fb 1-003c: Couldn't send I2C command. [ 176.203556] mmc0: Timeout waiting for hardware interrupt. [ 176.203565] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 176.203575] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 176.203579] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 176.203584] mmc0: sdhci: Argument: 0x05044860 | Trn mode: 0x0000002b [ 176.203588] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 176.203592] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 176.203597] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 176.203601] mmc0: sdhci: Timeout: 0x00000000 | Int stat: 0x00000003 [ 176.203605] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 176.203610] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 176.203614] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 176.203618] mmc0: sdhci: Cmd: 0x0000193a | Max curr: 0x00000000 [ 176.203622] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x03b8ab7f [ 176.203626] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 176.203630] mmc0: sdhci: Host ctl2: 0x0000000b [ 176.203635] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 176.203638] mmc0: sdhci: ============================================ [ 176.715577] omap_i2c 20010000.i2c: controller timed out [ 176.715598] ssd1307fb 1-003c: Couldn't send I2C command. [ 177.867571] omap_i2c 20010000.i2c: controller timed out [ 177.867593] ssd1307fb 1-003c: Couldn't send I2C command. [ 178.923574] omap_i2c 20010000.i2c: controller timed out [ 178.923597] ssd1307fb 1-003c: Couldn't send I2C command. [ 179.979578] omap_i2c 20010000.i2c: controller timed out [ 179.979601] ssd1307fb 1-003c: Couldn't send I2C command. [ 181.035572] omap_i2c 20010000.i2c: controller timed out [ 181.035595] ssd1307fb 1-003c: Couldn't send I2C command. [ 182.091593] omap_i2c 20010000.i2c: controller timed out [ 182.091617] ssd1307fb 1-003c: Couldn't send I2C command. [ 183.147572] omap_i2c 20010000.i2c: controller timed out [ 183.147596] ssd1307fb 1-003c: Couldn't send I2C command. [ 184.203580] omap_i2c 20010000.i2c: controller timed out [ 184.203605] ssd1307fb 1-003c: Couldn't send I2C command. [ 185.259581] omap_i2c 20010000.i2c: controller timed out [ 185.259604] ssd1307fb 1-003c: Couldn't send I2C command. [ 186.315582] omap_i2c 20010000.i2c: controller timed out [ 186.315605] ssd1307fb 1-003c: Couldn't send I2C command. [ 186.443553] mmc0: Timeout waiting for hardware interrupt. [ 186.443561] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 186.443568] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 186.443573] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 186.443577] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 186.443581] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 186.443585] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 186.443589] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 186.443594] mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00018002 [ 186.443598] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 186.443602] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 186.443607] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 186.443611] mmc0: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 [ 186.443615] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x03b8ab7f [ 186.443619] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 186.443622] mmc0: sdhci: Host ctl2: 0x0000000b [ 186.443627] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 186.443630] mmc0: sdhci: ============================================ [ 187.067552] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 187.067574] rcu: 0-...0: (18 ticks this GP) idle=fea/1/0x4000000000000000 softirq=7633/7634 fqs=2619 [ 187.067581] (detected by 1, t=5252 jiffies, g=6921, q=894) [ 187.067585] Task dump for CPU 0: [ 187.067590] task:irq/543-f400000 state:R running task stack: 0 pid: 1155 ppid: 2 flags:0x0000002a [ 187.067605] Call trace: [ 187.067622] __switch_to+0xc0/0x120 [ 187.067642] cdns3_hw_role_switch.part.0+0x60/0x140 [cdns3] [ 187.067651] cdns3_hw_role_switch+0x20/0x2c [cdns3] [ 187.067660] cdns3_drd_thread_irq+0x14/0x24 [cdns3] [ 187.067670] irq_thread_fn+0x2c/0xb0 [ 187.067675] irq_thread+0x1b8/0x300 [ 187.067682] kthread+0x154/0x160 [ 187.067687] ret_from_fork+0x10/0x38 [ 187.371576] omap_i2c 20010000.i2c: controller timed out [ 187.371602] ssd1307fb 1-003c: Couldn't send I2C command. [ 188.619570] omap_i2c 20010000.i2c: controller timed out [ 188.619596] ssd1307fb 1-003c: Couldn't send I2C command. [ 189.675574] omap_i2c 20010000.i2c: controller timed out [ 189.675598] ssd1307fb 1-003c: Couldn't send I2C command. [ 190.731574] omap_i2c 20010000.i2c: controller timed out [ 190.731598] ssd1307fb 1-003c: Couldn't send I2C command. [ 191.787575] omap_i2c 20010000.i2c: controller timed out [ 191.787601] ssd1307fb 1-003c: Couldn't send I2C command. [ 192.843589] omap_i2c 20010000.i2c: controller timed out [ 192.843613] ssd1307fb 1-003c: Couldn't send I2C command. [ 193.899571] omap_i2c 20010000.i2c: controller timed out [ 193.899595] ssd1307fb 1-003c: Couldn't send I2C command. [ 194.955574] omap_i2c 20010000.i2c: controller timed out [ 194.955598] ssd1307fb 1-003c: Couldn't send I2C command. [ 196.012221] omap_i2c 20010000.i2c: controller timed out [ 196.012245] ssd1307fb 1-003c: Couldn't send I2C command. [ 196.683555] mmc0: Timeout waiting for hardware cmd interrupt. [ 196.683564] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 196.683573] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 196.683578] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 196.683582] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000023 [ 196.683586] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 196.683590] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 196.683594] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 196.683598] mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00018001 [ 196.683603] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 196.683607] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 196.683611] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 196.683615] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000 [ 196.683619] mmc0: sdhci: Resp[0]: 0x00400900 | Resp[1]: 0x03b8ab7f [ 196.683623] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 196.683627] mmc0: sdhci: Host ctl2: 0x0000000b [ 196.683632] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 196.683635] mmc0: sdhci: ============================================ [ 197.067581] omap_i2c 20010000.i2c: controller timed out [ 197.067605] ssd1307fb 1-003c: Couldn't send I2C command. [ 198.251580] omap_i2c 20010000.i2c: controller timed out [ 198.251603] ssd1307fb 1-003c: Couldn't send I2C command. [ 199.307577] omap_i2c 20010000.i2c: controller timed out [ 199.307600] ssd1307fb 1-003c: Couldn't send I2C command. [ 200.363571] omap_i2c 20010000.i2c: controller timed out [ 200.363592] ssd1307fb 1-003c: Couldn't send I2C command. [ 201.419576] omap_i2c 20010000.i2c: controller timed out [ 201.419599] ssd1307fb 1-003c: Couldn't send I2C command. [ 202.475572] omap_i2c 20010000.i2c: controller timed out [ 202.475594] ssd1307fb 1-003c: Couldn't send I2C command. [ 203.531573] omap_i2c 20010000.i2c: controller timed out [ 203.531595] ssd1307fb 1-003c: Couldn't send I2C command. [ 204.587574] omap_i2c 20010000.i2c: controller timed out [ 204.587596] ssd1307fb 1-003c: Couldn't send I2C command. [ 205.643589] omap_i2c 20010000.i2c: controller timed out [ 205.643613] ssd1307fb 1-003c: Couldn't send I2C command. [ 206.699576] omap_i2c 20010000.i2c: controller timed out [ 206.699601] ssd1307fb 1-003c: Couldn't send I2C command. [ 206.923554] mmc0: Timeout waiting for hardware cmd interrupt. [ 206.923562] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 206.923569] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 206.923573] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 206.923577] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000023 [ 206.923582] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 206.923586] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 206.923590] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 206.923595] mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00018001 [ 206.923599] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 206.923604] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 206.923608] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 206.923612] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000 [ 206.923616] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x03b8ab7f [ 206.923620] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 206.923623] mmc0: sdhci: Host ctl2: 0x0000000b [ 206.923628] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 206.923631] mmc0: sdhci: ============================================ [ 207.755576] omap_i2c 20010000.i2c: controller timed out [ 207.755601] ssd1307fb 1-003c: Couldn't send I2C command. [ 208.907574] omap_i2c 20010000.i2c: controller timed out [ 208.907598] ssd1307fb 1-003c: Couldn't send I2C command. [ 209.963574] omap_i2c 20010000.i2c: controller timed out [ 209.963595] ssd1307fb 1-003c: Couldn't send I2C command. [ 211.019581] omap_i2c 20010000.i2c: controller timed out [ 211.019606] ssd1307fb 1-003c: Couldn't send I2C command. [ 212.075575] omap_i2c 20010000.i2c: controller timed out [ 212.075600] ssd1307fb 1-003c: Couldn't send I2C command. [ 213.131576] omap_i2c 20010000.i2c: controller timed out [ 213.131599] ssd1307fb 1-003c: Couldn't send I2C command. [ 214.187571] omap_i2c 20010000.i2c: controller timed out [ 214.187595] ssd1307fb 1-003c: Couldn't send I2C command. [ 215.243572] omap_i2c 20010000.i2c: controller timed out [ 215.243596] ssd1307fb 1-003c: Couldn't send I2C command. [ 216.299576] omap_i2c 20010000.i2c: controller timed out [ 216.299602] ssd1307fb 1-003c: Couldn't send I2C command. [ 217.163556] mmc0: Timeout waiting for hardware cmd interrupt. [ 217.163565] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 217.163574] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 217.163578] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 217.163582] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 217.163587] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 217.163591] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 217.163595] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 217.163600] mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00018002 [ 217.163604] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 217.163608] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 217.163613] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 217.163616] mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00000000 [ 217.163621] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x03b8ab7f [ 217.163625] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 217.163628] mmc0: sdhci: Host ctl2: 0x0000000b [ 217.163633] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 217.163636] mmc0: sdhci: ============================================ [ 217.355570] omap_i2c 20010000.i2c: controller timed out [ 217.355595] ssd1307fb 1-003c: Couldn't send I2C command. [ 218.507572] omap_i2c 20010000.i2c: controller timed out [ 218.507597] ssd1307fb 1-003c: Couldn't send I2C command. [ 219.564218] omap_i2c 20010000.i2c: controller timed out [ 219.564241] ssd1307fb 1-003c: Couldn't send I2C command. [ 220.619583] omap_i2c 20010000.i2c: controller timed out [ 220.619605] ssd1307fb 1-003c: Couldn't send I2C command. [ 221.675576] omap_i2c 20010000.i2c: controller timed out [ 221.675600] ssd1307fb 1-003c: Couldn't send I2C command. [ 222.732284] omap_i2c 20010000.i2c: controller timed out [ 222.732306] ssd1307fb 1-003c: Couldn't send I2C command. [ 223.787579] omap_i2c 20010000.i2c: controller timed out [ 223.787602] ssd1307fb 1-003c: Couldn't send I2C command. [ 224.843573] omap_i2c 20010000.i2c: controller timed out [ 224.843596] ssd1307fb 1-003c: Couldn't send I2C command. [ 225.899573] omap_i2c 20010000.i2c: controller timed out [ 225.899596] ssd1307fb 1-003c: Couldn't send I2C command. [ 226.955575] omap_i2c 20010000.i2c: controller timed out [ 226.955597] ssd1307fb 1-003c: Couldn't send I2C command. [ 227.403555] mmc0: Timeout waiting for hardware cmd interrupt. [ 227.403564] mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== [ 227.403573] mmc0: sdhci: Sys addr: 0x00000400 | Version: 0x00001004 [ 227.403577] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000000 [ 227.403581] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 227.403585] mmc0: sdhci: Present: 0x01f70000 | Host ctl: 0x0000001f [ 227.403589] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000080 [ 227.403594] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007 [ 227.403598] mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00018002 [ 227.403603] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b [ 227.403607] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 227.403611] mmc0: sdhci: Caps: 0x3de8c801 | Caps_1: 0x18002407 [ 227.403615] mmc0: sdhci: Cmd: 0x00000c1a | Max curr: 0x00000000 [ 227.403619] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x03b8ab7f [ 227.403623] mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x00000900 [ 227.403626] mmc0: sdhci: Host ctl2: 0x0000000b [ 227.403632] mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000817a2800 [ 227.403635] mmc0: sdhci: ============================================ [ 228.011576] omap_i2c 20010000.i2c: controller timed out [ 228.011600] ssd1307fb 1-003c: Couldn't send I2C command.