U-Boot SPL 2024.04-ti-g818c76aed67f (Aug 01 2024 - 19:19:47 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)') Initialized 2 DRAM controllers SPL initial stack usage: 13456 bytes Trying to boot from MMC1 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Loading Environment from nowhere... OK init_env from device 17 not supported! Starting ATF on ARM64 core... NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty NOTICE: BL31: Built : 16:09:05, Feb 9 2024 I/TC: I/TC: OP-TEE version: 4.2.0-dev (gcc version 13.3.0 (GCC)) #1 Fri Apr 12 09:51:21 UTC 2024 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: GIC redistributor base address not provided I/TC: Assuming default GIC group status and modifier I/TC: SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2024.04-ti-g818c76aed67f (Aug 01 2024 - 19:19:47 +0000) SYSFW ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)') Trying to boot from MMC1 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2024.04-ti-g818c76aed67f (Aug 01 2024 - 19:19:47 +0000) SoC: J784S4 SR1.0 GP Model: Texas Instruments J784S4 EVM DRAM: 2 GiB (effective 16 GiB) Core: 133 devices, 31 uclasses, devicetree: separate Flash: 0 Bytes MMC: mmc@4f80000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@2850000 Out: serial@2850000 Err: serial@2850000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 Net: eth0: ethernet@46000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0(part 0) is current device SD/MMC found on device 0 Can't set block device k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work k3_r5f_rproc r5f@41400000: Core 2 is already in use. No rproc commands work 892488 bytes read in 62 ms (13.7 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 892488 bytes: Success! 322804 bytes read in 59 ms (5.2 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 322804 bytes: Success! 146624 bytes read in 55 ms (2.5 MiB/s) Load Remote Processor 4 with data@addr=0x82000000 146624 bytes: Success! 146624 bytes read in 56 ms (2.5 MiB/s) Load Remote Processor 5 with data@addr=0x82000000 146624 bytes: Success! 486652 bytes read in 59 ms (7.9 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 486652 bytes: Success! 146624 bytes read in 56 ms (2.5 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 146624 bytes: Success! 15601880 bytes read in 88 ms (169.1 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 15601880 bytes: Success! 15995208 bytes read in 93 ms (164 MiB/s) Load Remote Processor 9 with data@addr=0x82000000 15995208 bytes: Success! 15470920 bytes read in 87 ms (169.6 MiB/s) Load Remote Processor 10 with data@addr=0x82000000 15470920 bytes: Success! 15470920 bytes read in 97 ms (152.1 MiB/s) Load Remote Processor 11 with data@addr=0x82000000 15470920 bytes: Success! 20353536 bytes read in 98 ms (198.1 MiB/s) 132737 bytes read in 43 ms (2.9 MiB/s) Working FDT set to 88000000 1088 bytes read in 41 ms (25.4 KiB/s) 14369 bytes read in 40 ms (350.6 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=880000000 size=80000000 flags=4) Loading Device Tree to 000000008fedc000, end 000000008fffffff ... OK Working FDT set to 8fedc000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 6.6.32-ti-01301-gdb8871293143-dirty (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240620) #1 SMP PREEMPT Thu Aug 1 19:10:56 UTC 2024 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Texas Instruments J784S4 EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002850000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a0000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a0100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a1000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a1100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a2000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a3ffffff (31744 KiB) nomap non-reusable vision-apps-r5f-memory@a2100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a4000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a4100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a5000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a5100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a6000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a6100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a7000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a7100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable vision-apps-r5f-dma-memory@a8000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a8100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable vision-apps-r5f-memory@a8100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 48 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@ac000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000ac000000..0x00000000aeffffff (49152 KiB) nomap non-reusable vision-apps-rtos-ipc-memory-region@ac000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000af000000, size 48 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@af000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000af000000..0x00000000b1ffffff (49152 KiB) nomap non-reusable vision-apps-dma-memory@af000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b2000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b2000000..0x00000000b20fffff (1024 KiB) nomap non-reusable vision-apps-c71-dma-memory@b2000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b2100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b2100000..0x00000000b2603fff (5136 KiB) nomap non-reusable vision-apps-c71_0-memory@b2100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b4000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b4000000..0x00000000b40fffff (1024 KiB) nomap non-reusable vision-apps-c71_1-dma-memory@b4000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b4100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b4100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b4100000..0x00000000b4603fff (5136 KiB) nomap non-reusable vision-apps-c71_1-memory@b4100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_2-dma-memory@b6000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b6000000..0x00000000b60fffff (1024 KiB) nomap non-reusable vision-apps-c71_2-dma-memory@b6000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_2-memory@b6100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b6100000..0x00000000b6603fff (5136 KiB) nomap non-reusable vision-apps-c71_2-memory@b6100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_3-dma-memory@b8000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b8000000..0x00000000b80fffff (1024 KiB) nomap non-reusable vision-apps-c71_3-dma-memory@b8000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_3-memory@b8100000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000b8100000..0x00000000b8603fff (5136 KiB) nomap non-reusable vision-apps-c71_3-memory@b8100000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ba000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@ba000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000ba000000..0x00000000bdffffff (65536 KiB) nomap non-reusable vision-apps-core-heap-memory-lo@ba000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000be000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-queues@be000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000be000000..0x00000000be7fffff (8192 KiB) nomap non-reusable vision-apps-r5f-virtual-eth-queues@be000000 [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000be800000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-buffers@be800000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x00000000be800000..0x00000000bfffffff (24576 KiB) nomap non-reusable vision-apps-r5f-virtual-eth-buffers@be800000 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 2048 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-hi@880000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000880000000..0x00000008ffffffff (2097152 KiB) nomap non-reusable vision-apps-core-heap-memory-hi@880000000 [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] OF: reserved mem: 0x0000000900000000..0x000000093bffffff (983040 KiB) map non-reusable vision_apps_shared-memories [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000980000000, size 1792 MiB [ 0.000000] OF: reserved mem: initialized node linux-cma-buffers@980000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000980000000..0x00000009efffffff (1835008 KiB) map reusable linux-cma-buffers@980000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000bffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000b2603fff] [ 0.000000] node 0: [mem 0x00000000b2604000-0x00000000b3ffffff] [ 0.000000] node 0: [mem 0x00000000b4000000-0x00000000b4603fff] [ 0.000000] node 0: [mem 0x00000000b4604000-0x00000000b5ffffff] [ 0.000000] node 0: [mem 0x00000000b6000000-0x00000000b6603fff] [ 0.000000] node 0: [mem 0x00000000b6604000-0x00000000b7ffffff] [ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000b8603fff] [ 0.000000] node 0: [mem 0x00000000b8604000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x00000000ba000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] [ 0.000000] node 0: [mem 0x0000000900000000-0x0000000bffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 20 pages/cpu s42920 r8192 d30808 u81920 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02850000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=5028f0d0-2ee9-8848-934e-1c3b389018e8 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4128768 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 11065920K/16777216K available (12032K kernel code, 1252K rwdata, 4044K rodata, 2432K init, 504K bss, 3876288K reserved, 1835008K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: [Firmware Bug]: GICR region 0x0000000001900000 has overlapping address [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @93c800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x000000093c060000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000093c070000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008459] Console: colour dummy device 80x25 [ 0.013036] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023708] pid_max: default: 32768 minimum: 301 [ 0.028471] LSM: initializing lsm=capability,integrity [ 0.033818] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.041602] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.050900] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.058163] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.066011] rcu: Hierarchical SRCU implementation. [ 0.070908] rcu: Max phase no-delay instances is 1000. [ 0.076421] Platform MSI: msi-controller@1820000 domain created [ 0.082648] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.092098] EFI services will not be available. [ 0.096977] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot [ 0.110094] Detected PIPT I-cache on CPU1 [ 0.110142] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.110157] GICv3: CPU1: using allocated LPI pending table @0x000000093c080000 [ 0.110192] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.118674] Detected PIPT I-cache on CPU2 [ 0.118701] GICv3: CPU2: found redistributor 2 region 0:0x0000000001940000 [ 0.118714] GICv3: CPU2: using allocated LPI pending table @0x000000093c090000 [ 0.118738] CPU2: Booted secondary processor 0x0000000002 [0x411fd080] [ 0.127183] Detected PIPT I-cache on CPU3 [ 0.127213] GICv3: CPU3: found redistributor 3 region 0:0x0000000001960000 [ 0.127226] GICv3: CPU3: using allocated LPI pending table @0x000000093c0a0000 [ 0.127249] CPU3: Booted secondary processor 0x0000000003 [0x411fd080] [ 0.135754] Detected PIPT I-cache on CPU4 [ 0.135813] GICv3: CPU4: found redistributor 100 region 0:0x0000000001980000 [ 0.135827] GICv3: CPU4: using allocated LPI pending table @0x000000093c0b0000 [ 0.135859] CPU4: Booted secondary processor 0x0000000100 [0x411fd080] [ 0.144355] Detected PIPT I-cache on CPU5 [ 0.144392] GICv3: CPU5: found redistributor 101 region 0:0x00000000019a0000 [ 0.144405] GICv3: CPU5: using allocated LPI pending table @0x000000093c0c0000 [ 0.144430] CPU5: Booted secondary processor 0x0000000101 [0x411fd080] [ 0.152894] Detected PIPT I-cache on CPU6 [ 0.152931] GICv3: CPU6: found redistributor 102 region 0:0x00000000019c0000 [ 0.152943] GICv3: CPU6: using allocated LPI pending table @0x000000093c0d0000 [ 0.152968] CPU6: Booted secondary processor 0x0000000102 [0x411fd080] [ 0.161435] Detected PIPT I-cache on CPU7 [ 0.161475] GICv3: CPU7: found redistributor 103 region 0:0x00000000019e0000 [ 0.161487] GICv3: CPU7: using allocated LPI pending table @0x000000093c0e0000 [ 0.161511] CPU7: Booted secondary processor 0x0000000103 [0x411fd080] [ 0.161565] smp: Brought up 1 node, 8 CPUs [ 0.342550] SMP: Total of 8 processors activated. [ 0.347357] CPU features: detected: 32-bit EL0 Support [ 0.352611] CPU features: detected: CRC32 instructions [ 0.357908] CPU: All CPU(s) started at EL2 [ 0.362098] alternatives: applying system-wide alternatives [ 0.368928] devtmpfs: initialized [ 0.381820] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.391796] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.425589] pinctrl core: initialized pinctrl subsystem [ 0.431253] DMI not present or invalid. [ 0.435532] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.442409] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.450072] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.458428] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.466642] audit: initializing netlink subsys (disabled) [ 0.472258] audit: type=2000 audit(0.324:1): state=initialized audit_enabled=0 res=1 [ 0.472453] thermal_sys: Registered thermal governor 'step_wise' [ 0.480185] thermal_sys: Registered thermal governor 'power_allocator' [ 0.486340] cpuidle: using governor menu [ 0.497090] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.504113] ASID allocator initialised with 65536 entries [ 0.520240] platform a40000.pinctrl: Fixed dependency cycle(s) with /bus@100000/pinctrl@a40000/mcu-cpsw-cpts [ 0.531460] Modules: 27664 pages in range for non-PLT usage [ 0.531464] Modules: 519184 pages in range for PLT usage [ 0.537598] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.549967] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.556374] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.563309] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.569712] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.576647] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.583050] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.589985] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.597169] k3-chipinfo 43000014.chipid: Family:J784S4 rev:SR1.0 JTAGID[0x0bb8002f] Detected [ 0.606188] iommu: Default domain type: Translated [ 0.611089] iommu: DMA domain TLB invalidation policy: strict mode [ 0.617544] SCSI subsystem initialized [ 0.621531] usbcore: registered new interface driver usbfs [ 0.627151] usbcore: registered new interface driver hub [ 0.632592] usbcore: registered new device driver usb [ 0.637989] pps_core: LinuxPPS API ver. 1 registered [ 0.643062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.652400] PTP clock support registered [ 0.656513] EDAC MC: Ver: 3.0.0 [ 0.659942] scmi_core: SCMI protocol bus registered [ 0.665065] FPGA manager framework [ 0.668575] Advanced Linux Sound Architecture Driver Initialized. [ 0.675234] vgaarb: loaded [ 0.678150] clocksource: Switched to clocksource arch_sys_counter [ 0.684500] VFS: Disk quotas dquot_6.6.0 [ 0.688527] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.698843] Carveout Heap: Exported 960 MiB at 0x0000000900000000 [ 0.705127] NET: Registered PF_INET protocol family [ 0.710544] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.723237] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.732143] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.740075] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.748757] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.757561] TCP: Hash tables configured (established 131072 bind 65536) [ 0.764449] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.771565] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.779214] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.785322] RPC: Registered named UNIX socket transport module. [ 0.791382] RPC: Registered udp transport module. [ 0.796185] RPC: Registered tcp transport module. [ 0.800988] RPC: Registered tcp-with-tls transport module. [ 0.806591] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.813173] NET: Registered PF_XDP protocol family [ 0.818078] PCI: CLS 0 bytes, default 64 [ 0.823120] Initialise system trusted keyrings [ 0.827762] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 0.834520] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.840628] NFS: Registering the id_resolver key type [ 0.845810] Key type id_resolver registered [ 0.850083] Key type id_legacy registered [ 0.854187] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.861037] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.882231] Key type asymmetric registered [ 0.886416] Asymmetric key parser 'x509' registered [ 0.891426] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.898991] io scheduler mq-deadline registered [ 0.903619] io scheduler kyber registered [ 0.907734] io scheduler bfq registered [ 0.913965] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 [ 0.919953] pinctrl-single 4301c038.pinctrl: 11 pins, size 44 [ 0.925970] pinctrl-single 4301c068.pinctrl: 72 pins, size 288 [ 0.932182] pinctrl-single 4301c190.pinctrl: 1 pins, size 4 [ 0.938007] pinctrl-single 11c000.pinctrl: 72 pins, size 288 [ 0.944068] pinctrl-single 104200.pinctrl: 20 pins, size 80 [ 0.949819] pinctrl-single 104280.pinctrl: 8 pins, size 32 [ 0.955823] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.965421] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.977949] loop: module loaded [ 0.981698] megasas: 07.725.01.00-rc1 [ 0.986092] MACsec IEEE 802.1AE [ 0.990563] tun: Universal TUN/TAP device driver, 1.6 [ 0.996257] VFIO - User Level meta-driver version: 0.3 [ 1.002140] usbcore: registered new interface driver usb-storage [ 1.008624] i2c_dev: i2c /dev entries driver [ 1.013629] sdhci: Secure Digital Host Controller Interface driver [ 1.019945] sdhci: Copyright(c) Pierre Ossman [ 1.024516] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.030715] ledtrig-cpu: registered to indicate activity on CPUs [ 1.037031] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.044007] usbcore: registered new interface driver usbhid [ 1.049702] usbhid: USB HID core driver [ 1.054513] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.063202] optee: probing for conduit method. I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 1.067783] optee: revision 4.2 (12d7c4ee) [ 1.084209] optee: dynamic shared memory is enabled [ 1.093776] random: crng init done [ 1.097304] optee: initialized driver [ 1.102219] NET: Registered PF_PACKET protocol family [ 1.107430] Key type dns_resolver registered [ 1.115278] registered taskstats version 1 [ 1.119734] Loading compiled-in X.509 certificates [ 1.131952] ti-sci 44083000.system-controller: ABI: 4.0 (firmware rev 0x000a '10.0.8--v10.00.08 (Fiery Fox)') [ 1.175306] ti-sci-clk 44083000.system-controller:clock-controller: get-parent failed for dev=157, clk=34, ret=-19 [ 1.185982] ti-sci-clk 44083000.system-controller:clock-controller: get-parent failed for dev=157, clk=34, ret=-19 [ 1.196679] ti-sci-clk 44083000.system-controller:clock-controller: get-parent failed for dev=157, clk=34, ret=-19 [ 1.225216] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz [ 1.231454] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz [ 1.237504] omap_i2c 40b10000.i2c: bus 2 rev0.12 at 400 kHz [ 1.243738] pca953x 3-0022: supply vcc not found, using dummy regulator [ 1.250560] pca953x 3-0022: using AI [ 1.271067] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz [ 1.277045] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz [ 1.283411] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz [ 1.289130] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 177 domain created [ 1.297662] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 10 domain created [ 1.306917] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 283 domain created [ 1.315615] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 321 created [ 1.324630] ti-udma 311a0000.dma-controller: Number of rings: 48 [ 1.331566] ti-udma 311a0000.dma-controller: Channels: 24 (bchan: 0, tchan: 8, rchan: 16) [ 1.340901] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:328 [ 1.350778] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 1.357537] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 [ 1.366960] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:315 [ 1.377118] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 1.383877] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 [ 1.391919] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 228, base_baud = 6000000) is a 8250 [ 1.401502] 2850000.serial: ttyS2 at MMIO 0x2850000 (irq = 229, base_baud = 3000000) is a 8250 [ 1.410363] printk: console [ttyS2] enabled [ 1.410363] printk: console [ttyS2] enabled [ 1.418816] printk: bootconsole [ns16550a0] disabled [ 1.418816] printk: bootconsole [ns16550a0] disabled [ 1.470155] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.485276] davinci_mdio 46000f00.mdio: phy[19]: device 46000f00.mdio:13, driver NXP C45 TJA1120 [ 1.494066] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 1.506876] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 1.514084] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 1.520244] pps pps0: new PPS source ptp0 [ 1.524405] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1 [ 1.574150] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.588988] davinci_mdio c200f00.mdio: phy[19]: device c200f00.mdio:13, driver NXP C45 TJA1120 [ 1.597600] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 1.610357] am65-cpsw-nuss c200000.ethernet: Use random MAC address [ 1.616612] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4 [ 1.623731] am65-cpsw-nuss c200000.ethernet: ALE Table size 64 [ 1.629859] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:250000000, add_val:3 pps:0 [ 1.639908] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fca100 [ 1.646525] mmc0: CQHCI version 5.10 [ 1.646746] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fca100 [ 1.656909] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fca100 [ 1.663706] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fca100 [ 1.670563] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fca100 [ 1.677353] omap-mailbox 31f85000.mailbox: omap mailbox rev 0x66fca100 [ 1.686714] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit [ 1.765409] mmc0: Command Queue Engine enabled [ 1.769857] mmc0: new HS400 MMC card at address 0001 [ 1.775190] mmcblk0: mmc0:0001 DG4008 7.28 GiB [ 1.782268] mmcblk0: p1 [ 1.785060] mmcblk0boot0: mmc0:0001 DG4008 4.00 MiB [ 1.790633] mmcblk0boot1: mmc0:0001 DG4008 4.00 MiB [ 1.796101] mmcblk0rpmb: mmc0:0001 DG4008 4.00 MiB, chardev (239:0) [ 1.952788] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 [ 1.958748] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock [ 1.967531] ti-udma 285c0000.dma-controller: Channels: 22 (tchan: 11, rchan: 11, gp-rflow: 8) [ 1.977866] ti-udma 31150000.dma-controller: Channels: 66 (tchan: 33, rchan: 33, gp-rflow: 16) [ 1.990224] spi-nor: probe of spi0.0 failed with error -22 [ 2.034152] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.048403] davinci_mdio 46000f00.mdio: phy[19]: device 46000f00.mdio:13, driver NXP C45 TJA1120 [ 2.057195] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 2.070015] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 2.077224] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 2.083390] pps pps0: new PPS source ptp0 [ 2.087523] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1 [ 2.102289] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 2.150162] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.164244] davinci_mdio c200f00.mdio: phy[19]: device c200f00.mdio:13, driver NXP C45 TJA1120 [ 2.172861] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 2.185629] am65-cpsw-nuss c200000.ethernet: Use random MAC address [ 2.191892] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4 [ 2.199011] am65-cpsw-nuss c200000.ethernet: ALE Table size 64 [ 2.205182] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:250000000, add_val:3 pps:0 [ 2.220355] am65-cpsw-nuss c200000.ethernet: set new flow-id-base 82 [ 2.233047] clk: Disabling unused clocks [ 2.245829] ALSA device list: [ 2.248869] No soundcards found. [ 2.329423] EXT4-fs (mmcblk0p1): recovery complete [ 2.335151] EXT4-fs (mmcblk0p1): mounted filesystem 3d4bc2d8-8a66-4edd-85f8-09abc1034b02 r/w with ordered data mode. Quota mode: none. [ 2.347256] VFS: Mounted root (ext4 filesystem) on device 179:1. [ 2.353806] devtmpfs: mounted [ 2.357808] Freeing unused kernel memory: 2432K [ 2.362461] Run /sbin/init as init process [ 2.441793] systemd[1]: System time before build time, advancing clock. [ 2.463411] NET: Registered PF_INET6 protocol family [ 2.468997] Segment Routing with IPv6 [ 2.472676] In-situ OAM (IOAM) with IPv6 [ 2.491451] systemd[1]: systemd 255.4^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.523254] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 2.543347] systemd[1]: Hostname set to . [ 2.680241] systemd[1]: /usr/lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.736297] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 2.780706] systemd[1]: Queued start job for default target Graphical Interface. [ 2.808891] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 2.831168] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 2.855059] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 2.878858] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 2.902316] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 2.926277] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 2.950226] systemd[1]: Expecting device /dev/ttyS2... Expecting device /dev/ttyS2... [ 2.966247] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 2.982205] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.002196] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 3.018205] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 3.060853] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 3.086305] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 3.109897] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.130322] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.154637] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.174395] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.194439] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.210464] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.235540] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.258362] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.278933] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 3.318409] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 3.336036] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 3.360136] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 3.374459] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 3.390616] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 3.408758] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 3.432569] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 3.452467] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 3.472287] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 3.489552] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen.[ 3.496364] fuse: init (API version 7.39) .. [ 3.516911] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 3.530379] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 3.546329] systemd[1]: Starting Journal Service... Starting Journal Service... [ 3.565385] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 3.584666] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network units from Kernel co[ 3.595486] cryptodev: loading out-of-tree module taints kernel. [ 3.603746] systemd-journald[162]: Collecting audit messages is enabled. mmand line... [ 3.611302] cryptodev: driver 1.13 loaded. [ 3.624749] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 3.648963] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 3.670488] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 3.686521] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ 3.698458] EXT4-fs (mmcblk0p1): re-mounted 3d4bc2d8-8a66-4edd-85f8-09abc1034b02 r/w. Quota mode: none. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Start psplas…temd progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 4.054091] systemd-journald[162]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev gracefully... [ OK ] Finished Coldplug All udev Devices. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev gracefully. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... [ 4.319545] audit: type=1334 audit(1709054765.876:2): prog-id=6 op=LOAD [ 4.326382] audit: type=1334 audit(1709054765.884:3): prog-id=7 op=LOAD Starting Rule-based Manager for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save OS Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Finished Load/Save OS Random Seed. [ OK ] Finished Create Volatile Files and Directories. [ 4.473045] audit: type=1334 audit(1709054766.028:4): prog-id=8 op=LOAD Starting Network Name Resolution... [ 4.497003] audit: type=1334 audit(1709054766.052:5): prog-id=9 op=LOAD Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Found device /dev/ttyS2. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ 4.679124] ina2xx 5-004d: supply vs not found, using dummy regulator [ 4.685996] mc: Linux media interface: v0.10 [ 4.690753] CAN device driver interface [ 4.702451] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 [ 4.702772] videodev: Linux video capture interface: v2.00 [ 4.713789] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ 4.717520] audit: type=1334 audit(1709054766.268:6): prog-id=10 op=LOAD [ 4.731150] audit: type=1334 audit(1709054766.272:7): prog-id=11 op=LOAD [ 4.733782] ina2xx 5-004d: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.737889] audit: type=1334 audit(1709054766.280:8): prog-id=12 op=LOAD [ 4.745075] remoteproc remoteproc0: 64800000.dsp is available [ 4.751595] ina2xx 5-004c: supply vs not found, using dummy regulator [ 4.756842] remoteproc remoteproc0: attaching to 64800000.dsp Starting User Database Manager... [ 4.779108] ina2xx 5-004c: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.779417] remoteproc remoteproc0: unsupported resource 65538 [ 4.785672] PVR_K: 268: Device: 4e20000000.gpu [ 4.786850] ina2xx 5-0047: supply vs not found, using dummy regulator [ 4.791819] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode [ 4.809237] rproc-virtio rproc-virtio.6.auto: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 [ 4.819632] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 4.820235] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 4.820362] PVR_K: 268: Read BVNC 36.53.104.796 from HW device registers [ 4.820375] PVR_K: 268: RGX Device registered BVNC 36.53.104.796 with 1 core in the system [ 4.831485] platform 41000000.r5f: configured R5F for IPC-only mode [ 4.840419] virtio_rpmsg_bus virtio0: rpmsg host is online [ 4.843054] ina2xx 5-0047: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.844077] [drm] Initialized pvr 24.1.6554834 20170530 for 4e20000000.gpu on minor 0 [ 4.844407] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 4.844982] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 4.846524] ina2xx 5-0046: supply vs not found, using dummy regulator [ 4.846735] at24 0-0050: supply vcc not found, using dummy regulator [ 4.856058] rproc-virtio rproc-virtio.6.auto: registered virtio0 (type 7) [ 4.856264] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 4.863445] ina2xx 5-0046: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.865237] remoteproc remoteproc0: remote processor 64800000.dsp is now attached [ 4.871581] ina2xx 5-0045: supply vs not found, using dummy regulator [ 4.880763] remoteproc remoteproc1: 41000000.r5f is available [ 4.886529] k3-dsp-rproc 65800000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b4000000 [ 4.891526] ina2xx 5-0045: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.891750] ina2xx 5-0044: supply vs not found, using dummy regulator [ 4.893512] ina2xx 5-0044: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.893640] ina2xx 5-0042: supply vs not found, using dummy regulator [ 4.894438] ina2xx 5-0042: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.894528] ina2xx 5-0041: supply vs not found, using dummy regulator [ 4.894988] ina2xx 5-0041: power monitor ina226 (Rshunt = 10000 uOhm) [ 4.896552] remoteproc remoteproc1: attaching to 41000000.r5f [ 4.902850] k3-dsp-rproc 65800000.dsp: configured DSP for IPC-only mode [ 4.907792] m_can_platform 40528000.can: m_can device registered (irq=606, version=32) [ 4.928808] platform 41000000.r5f: R5F core initialized in IPC-only mode [ 4.930999] m_can_platform 2711000.can: m_can device registered (irq=607, version=32) [ 4.937711] remoteproc remoteproc2: 65800000.dsp is available [ 4.942659] rproc-virtio rproc-virtio.7.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 4.948145] remoteproc remoteproc2: attaching to 65800000.dsp [ 4.952153] remoteproc remoteproc2: unsupported resource 65538 [ 4.960115] virtio_rpmsg_bus virtio1: rpmsg host is online [ 4.960280] m_can_platform 2741000.can: m_can device registered (irq=609, version=32) [ 4.962008] m_can_platform 2751000.can: m_can device registered (irq=610, version=32) [ 4.964710] vdec 4210000.video-codec: Added wave5 driver with caps: 'ENCODE' 'DECODE' [ 4.964998] m_can_platform 26a1000.can: m_can device registered (irq=611, version=32) [ 4.965363] k3-dsp-rproc 65800000.dsp: DSP initialized in IPC-only mode [ 4.965443] rproc-virtio rproc-virtio.8.auto: assigned reserved memory node vision-apps-c71_1-dma-memory@b4000000 [ 4.965955] virtio_rpmsg_bus virtio2: rpmsg host is online [ 4.965974] rproc-virtio rproc-virtio.8.auto: registered virtio2 (type 7) [ 4.965979] remoteproc remoteproc2: remote processor 65800000.dsp is now attached [ 4.966472] k3-dsp-rproc 66800000.dsp: assigned reserved memory node vision-apps-c71_2-dma-memory@b6000000 [ 4.966945] k3-dsp-rproc 66800000.dsp: configured DSP for IPC-only mode [ 4.967094] remoteproc remoteproc3: 66800000.dsp is available [ 4.967150] remoteproc remoteproc3: attaching to 66800000.dsp [ 4.967288] remoteproc remoteproc3: unsupported resource 65538 [ 4.968070] k3-dsp-rproc 66800000.dsp: DSP initialized in IPC-only mode [ 4.968091] rproc-virtio rproc-virtio.9.auto: assigned reserved memory node vision-apps-c71_2-dma-memory@b6000000 [ 4.968653] virtio_rpmsg_bus virtio3: rpmsg host is online [ 4.968678] rproc-virtio rproc-virtio.9.auto: registered virtio3 (type 7) [ 4.968683] remoteproc remoteproc3: remote processor 66800000.dsp is now attached [ 4.969423] k3-dsp-rproc 67800000.dsp: assigned reserved memory node vision-apps-c71_3-dma-memory@b8000000 [ 4.969664] k3-dsp-rproc 67800000.dsp: configured DSP for IPC-only mode [ 4.969820] remoteproc remoteproc4: 67800000.dsp is available [ 4.969868] remoteproc remoteproc4: attaching to 67800000.dsp [ 4.970022] remoteproc remoteproc4: unsupported resource 65538 [ 4.970362] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 4.970959] k3-dsp-rproc 67800000.dsp: DSP initialized in IPC-only mode [ 4.970976] rproc-virtio rproc-virtio.10.auto: assigned reserved memory node vision-apps-c71_3-dma-memory@b8000000 [ 4.971511] virtio_rpmsg_bus virtio4: rpmsg host is online [ 4.971689] rproc-virtio rproc-virtio.7.auto: registered virtio1 (type 7) [ 4.971697] remoteproc remoteproc1: remote processor 41000000.r5f is now attached [ 4.973356] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd [ 4.975480] platform 5c00000.r5f: configured R5F for IPC-only mode [ 4.975768] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 4.976207] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd [ 4.977986] vdec 4210000.video-codec: Product Code: 0x521c [ 4.981654] remoteproc remoteproc5: 5c00000.r5f is available [ 4.981738] remoteproc remoteproc5: attaching to 5c00000.r5f [ 4.984292] rproc-virtio rproc-virtio.10.auto: registered virtio4 (type 7) [ 4.984703] m_can_platform 40528000.can mcu_mcan0: renamed from can0 [ 4.985956] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 4.986192] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 4.986656] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 4.986676] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 4.987086] virtio_rpmsg_bus virtio5: rpmsg host is online [ 4.987100] rproc-virtio rproc-virtio.11.auto: registered virtio5 (type 7) [ 4.987105] remoteproc remoteproc5: remote processor 5c00000.r5f is now attached [ 4.987664] platform 5d00000.r5f: configured R5F for IPC-only mode [ 4.987898] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000 [ 4.988324] remoteproc remoteproc6: 5d00000.r5f is available [ 4.988377] remoteproc remoteproc6: attaching to 5d00000.r5f [ 4.988729] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 4.988737] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000 [ 4.989101] virtio_rpmsg_bus virtio6: rpmsg host is online [ 4.989117] rproc-virtio rproc-virtio.12.auto: registered virtio6 (type 7) [ 4.989121] remoteproc remoteproc6: remote processor 5d00000.r5f is now attached [ 4.990428] vdec 4210000.video-codec: Firmware Revision: 320127 [ 4.993180] platform 5e00000.r5f: configured R5F for IPC-only mode [ 4.993431] platform 5e00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a5000000 [ 4.994054] remoteproc remoteproc7: 5e00000.r5f is available [ 4.994117] remoteproc remoteproc7: attaching to 5e00000.r5f [ 4.994606] platform 5e00000.r5f: R5F core initialized in IPC-only mode [ 4.994615] rproc-virtio rproc-virtio.13.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a5000000 [ 4.994989] virtio_rpmsg_bus virtio7: rpmsg host is online [ 4.995002] rproc-virtio rproc-virtio.13.auto: registered virtio7 (type 7) [ 4.995006] remoteproc remoteproc7: remote processor 5e00000.r5f is now attached [ 4.995171] platform 5f00000.r5f: configured R5F for IPC-only mode [ 4.995268] platform 5f00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000 [ 4.995649] remoteproc remoteproc8: 5f00000.r5f is available [ 4.995688] remoteproc remoteproc8: attaching to 5f00000.r5f [ 4.995927] platform 5f00000.r5f: R5F core initialized in IPC-only mode [ 4.995935] rproc-virtio rproc-virtio.14.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000 [ 4.996278] virtio_rpmsg_bus virtio8: rpmsg host is online [ 4.996293] rproc-virtio rproc-virtio.14.auto: registered virtio8 (type 7) [ 4.996296] remoteproc remoteproc8: remote processor 5f00000.r5f is now attached [ 4.996881] remoteproc remoteproc4: remote processor 67800000.dsp is now attached [ 4.996920] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xd [ 5.012132] xhci-hcd xhci-hcd.15.auto: xHCI Host Controller [ 5.016068] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xd [ 5.030584] platform 5900000.r5f: configured R5F for IPC-only mode [ 5.038581] virtio_rpmsg_bus virtio8: creating channel rpmsg_chrdev addr 0xd [ 5.044744] platform 5900000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000 [ 5.054369] xhci-hcd xhci-hcd.15.auto: new USB bus registered, assigned bus number 1 [ 5.059713] m_can_platform 2751000.can main_mcan5: renamed from can3 [ 5.066297] remoteproc remoteproc9: 5900000.r5f is available [ 5.066454] virtio_rpmsg_bus virtio7: creating channel rpmsg_chrdev addr 0xd [ 5.069510] vdec 4220000.video-codec: Added wave5 driver with caps: 'ENCODE' 'DECODE' [ 5.069522] vdec 4220000.video-codec: Product Code: 0x521c [ 5.069526] vdec 4220000.video-codec: Firmware Revision: 320127 [ 5.072012] xhci-hcd xhci-hcd.15.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000002000008010 [ 5.079411] remoteproc remoteproc9: attaching to 5900000.r5f [ 5.087234] xhci-hcd xhci-hcd.15.auto: irq 612, io mem 0x06010000 [ 5.095744] platform 5900000.r5f: R5F core initialized in IPC-only mode [ 5.103036] xhci-hcd xhci-hcd.15.auto: xHCI Host Controller [ 5.109490] rproc-virtio rproc-virtio.16.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000 [ 5.119735] xhci-hcd xhci-hcd.15.auto: new USB bus registered, assigned bus number 2 [ 5.125834] virtio_rpmsg_bus virtio9: rpmsg host is online [ 5.132020] xhci-hcd xhci-hcd.15.auto: Host supports USB 3.0 SuperSpeed [ 5.132106] virtio_rpmsg_bus virtio9: creating channel rpmsg_chrdev addr 0xd [ 5.139564] rproc-virtio rproc-virtio.16.auto: registered virtio9 (type 7) [ 5.149657] hub 1-0:1.0: USB hub found [ 5.155773] remoteproc remoteproc9: remote processor 5900000.r5f is now attached [ 5.155957] platform 5a00000.r5f: configured R5F for IPC-only mode [ 5.159065] m_can_platform 2711000.can main_mcan1: renamed from can1 [ 5.161567] hub 1-0:1.0: 1 port detected [ 5.167519] platform 5a00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a8000000 [ 5.173537] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.180595] remoteproc remoteproc10: 5a00000.r5f is available [ 5.190460] hub 2-0:1.0: USB hub found [ 5.195679] remoteproc remoteproc10: attaching to 5a00000.r5f [ 5.202327] hub 2-0:1.0: 1 port detected [ 5.210353] platform 5a00000.r5f: R5F core initialized in IPC-only mode [ 5.215806] m_can_platform 2741000.can main_mcan4: renamed from can2 [ 5.841634] rproc-virtio rproc-virtio.17.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a8000000 Starting Virtual Console Setup... [ 5.852683] virtio_rpmsg_bus virtio10: rpmsg host is online [ 5.858903] virtio_rpmsg_bus virtio10: creating channel rpmsg_chrdev addr 0xd [ 5.862604] rproc-virtio rproc-virtio.17.auto: registered virtio10 (type 7) [ 5.869888] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15 [ 5.876645] remoteproc remoteproc10: remote processor 5a00000.r5f is now attached [ 5.891816] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15 [ 5.904395] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x15 [ 5.911673] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0x15 [ 5.918890] virtio_rpmsg_bus virtio7: creating channel rpmsg_chrdev addr 0x15 [ 5.926100] virtio_rpmsg_bus virtio8: creating channel rpmsg_chrdev addr 0x15 [ 5.933285] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0x15 [ 5.940446] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0x15 [ 5.947832] m_can_platform 26a1000.can main_mcan16: renamed from can4 [ 5.948330] virtio_rpmsg_bus virtio3: creating channel ti.ipc4.ping-pong addr 0xe [ 5.961939] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xe [ 5.969513] virtio_rpmsg_bus virtio7: creating channel ti.ipc4.ping-pong addr 0xe [ 5.977191] virtio_rpmsg_bus virtio8: creating channel ti.ipc4.ping-pong addr 0xe [ 5.984993] virtio_rpmsg_bus virtio10: creating channel rpmsg_chrdev addr 0x15 [ 5.992427] virtio_rpmsg_bus virtio6: creating channel ti.ipc4.ping-pong addr 0xe [ 6.000111] virtio_rpmsg_bus virtio10: creating channel ti.ipc4.ping-pong addr 0xe [ 6.008046] virtio_rpmsg_bus virtio9: creating channel rpmsg_chrdev addr 0x15 [ 6.015654] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe [ 6.023782] virtio_rpmsg_bus virtio9: creating channel ti.ipc4.ping-pong addr 0xe [ 6.031571] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe [ OK ] Finished Virtual Console Setup. [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. Starting Weston socket... [ 6.391683] audit: type=1334 audit(1738921913.994:9): prog-id=13 op=LOAD [ 6.394335] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xe Starting D-Bus System Message Bus... Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Docker Socket for the API. [ OK ] Started D-Bus System Message Bus 6.459201] dbus-broker-lau[447]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set m. [ OK ] Listening on Weston socket. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. Starting Avahi mDNS/DNS-SD Stack... Starting Configure main_cpsw2g phy mode... [ OK ] Started Periodic Command Scheduler. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... [ 6.678829] audit: type=1334 audit(1738921914.282:10): prog-id=14 op=LOAD Starting Expand the rootfs partiti…to full size [ 6.686170] audit: type=1334 audit(1738921914.286:11): prog-id=15 op=LOAD of the boot device.... [ OK ] Started 6.699080] audit: type=1334 audit(1738921914.302:12): prog-id=16 op=LOAD 9mstrongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. Starting User Login Management... Starting Telnet Server... [ OK ] Finished Configure main_cpsw2g phy mode. [ OK ] Finished IPv6 Packet Filtering Framework 6.735489] audit: type=1334 audit(1738921914.338:13): prog-id=17 op=LOAD m. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Started Telephony service. [ OK ] Finished Telnet Server. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started Avahi mDNS/[ 6.775479] Bluetooth: Core ver 2.22 DNS-SD Stack. [ OK ] Listening on Lo[ 6.782105] NET: Registered PF_BLUETOOTH protocol family ad/Save RF Kill Switch Status /dev/rfkill Watch. [ 6.792846] Bluetooth: HCI device and connection manager initialized [ 6.792867] Bluetooth: HCI socket layer initialized [ 6.792876] Bluetooth: L2CAP socket layer initialized [ 6.792893] Bluetooth: SCO socket layer initialized [ OK ] Finished Expand the rootfs partition to full size of the boot device.. [ OK ] Started User Login Management. [ 6.866883] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.884514] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.890545] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ OK ] Started Network Configuration. [ OK ] Reached target Network. Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. Starting Simple Network [ 6.984064] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:13] driver [NXP C45 TJA1120] (irq=POLL) Management Protocol (SNMP) Daemon.... Starting 6.995313] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-id link mode 0;1;39mPermit User Sessions... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ 7.019279] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Wayland compositor, as a system service... [ 7.068658] am65-cpsw-nuss c200000.ethernet eth1: PHY [c200f00.mdio:13] driver [NXP C45 TJA1120] (irq=POLL) [ 7.078465] am65-cpsw-nuss c200000.ethernet eth1: configuring for phy/rgmii-id link mode [ 7.097167] am65-cpsw-nuss c200000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ 7.200458] audit: type=1006 audit(1738921914.802:14): pid=529 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 7.213156] audit: type=1300 audit(1738921914.802:14): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffa7286c8 a2=4 a3=1 items=0 ppid=1 pid=529 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" key=(null) [ 7.239915] audit: type=1327 audit(1738921914.802:14): proctitle="(systemd)" [ OK ] Started Simple Network Management Protocol (SNMP) Daemon.. [ OK ] Finished Synchronize System and HW clocks. [ OK ] Started User Manager for UID 1000 7.495042] audit: type=1006 audit(1738921915.098:15): pid=520 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 0m. [ OK ] Started Session c1 of User we[ 7.509073] audit: type=1300 audit(1738921915.098:15): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffbeac558 a2=4 a3=1 items=0 ppid=1 pid=520 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/usr/lib/systemd/systemd-executor" key=(null) ston. [ OK ] Started containerd container runtime. [FAILED] Failed to start Weston, a Wayland compositor, as a system service. See 'systemctl status weston.service' for details. *************************************************************** *************************************************************** NOTICE: This file system contains the following GPL-3.0 packages: adwaita-icon-theme-symbolic autoconf bash-dev bash bc binutils cifs-utils coreutils-stdbuf coreutils cpio cpp-symlinks cpp cukinia dosfstools elfutils findutils g++-symlinks g++ gawk gcc-symlinks gcc gdb gdbserver gettext glmark2 gnu-config grub-common grub-editenv grub-efi gzip hidapi kbd-dev kbd-keymaps-pine less libasm1 libatomic-dev libatomic1 libbfd libdebuginfod1 libdw1 libelf1 libgcc-s-dev libgcc1 libgdbm-compat4 libgdbm-dev libgdbm6 libgettextlib libgettextsrc libgmp10 libidn2-0 libmpc3 libmpfr6 libopcodes libqt5charts-examples libqt5charts-plugins libqt5charts-qmlplugins libqt5charts5 libqt5serialport-examples libqt5serialport-plugins libqt5serialport-qmlplugins libqt5serialport5 libqt5svg-examples libqt5svg-plugins libqt5svg-qmlplugins libqt5svg5 libqt5virtualkeyboard-plugins libqt5virtualkeyboard-qmlplugins libqt5virtualkeyboard5 libreadline-dev libreadline8 libstdc++-dev libstdc++6 libunistring5 m4 make nettle parted piglit qt3d-plugins qt3d-qmlplugins qt3d qtbase-examples qtbase-plugins qtbase-qmlplugins qtbase qtconnectivity-plugins qtconnectivity-qmlplugins qtconnectivity qtdeclarative-plugins qtdeclarative-qmlplugins qtdeclarative-tools qtdeclarative qtgraphicaleffects-qmlplugins qtlocation-examples qtlocation-plugins qtlocation-qmlplugins qtlocation qtmultimedia-examples qtmultimedia-plugins qtmultimedia-qmlplugins qtmultimedia qtquics-qmlplugins.control qtquics2-plugins.control qtquics2-qmlplugins.control qtquics2.control qtscript-examples qtscript-plugins qtscript-qmlplugins qtscript qtwayland-examples qtwayland-plugins qtwayland-qmlplugins qtwayland tar which If you do not wish to distribute GPL-3.0 components please remove the above packages prior to distribution. This can be done using the opkg remove command. i.e.: opkg remove Where is the name printed in the list above NOTE: If the package is a dependency of another package you will be notified of the dependent packages. You should use the --force-removal-of-dependent-packages option to also remove the dependent packages as well *************************************************************** *************************************************************** [ OK ] Finished Print notice about GPLv3 packages. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project j784s4-evm ttyS2 Arago 2023.10 j784s4-evm ttyS2 j784s4-evm login: root [ 11.788275] kauditd_printk_skb: 1 callbacks suppressed [ 11.788282] audit: type=1006 audit(1738921919.390:16): pid=912 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 11.805804] audit: type=1300 audit(1738921919.390:16): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffff7b84908 a2=1 a3=1 items=0 ppid=1 pid=912 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/usr/lib/systemd/systemd-executor" key=(null) [ 11.832270] audit: type=1327 audit(1738921919.390:16): proctitle="(systemd)" [ 11.839333] audit: type=1334 audit(1738921919.406:17): prog-id=18 op=LOAD [ 11.846134] audit: type=1300 audit(1738921919.406:17): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff0b01288 a2=90 a3=0 items=0 ppid=1 pid=912 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) [ 11.871816] audit: type=1327 audit(1738921919.406:17): proctitle="(systemd)" [ 11.878871] audit: type=1334 audit(1738921919.406:18): prog-id=18 op=UNLOAD [ 11.885830] audit: type=1300 audit(1738921919.406:18): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=1 a2=0 a3=ffff9600fc60 items=0 ppid=1 pid=912 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/usr/lib/systemd/systemd" key=(null) [ 11.911339] audit: type=1327 audit(1738921919.406:18): proctitle="(systemd)" [ 11.918393] audit: type=1334 audit(1738921919.406:19): prog-id=19 op=LOAD root@j784s4-evm:~# root@j784s4-evm:~# root@j784s4-evm:~# cd /opt/vision_apps/ root@j784s4-evm:/opt/vision_apps# ./vision_apps_init.sh root@j784s4-evm:/opt/vision_apps# [MCU2_0] 5.344080 s: CIO: Init ... Done !!! [MCU2_0] 5.344135 s: ### CPU Frequency = 1000000000 Hz [MCU2_0] 5.344160 s: CPU is running FreeRTOS [MCU2_0] 5.344177 s: APP: Init ... !!! [MCU2_0] 5.344210 s: SCICLIENT: Init ... !!! [MCU2_0] 5.344328 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU2_0] 5.344356 s: SCICLIENT: DMSC FW revision 0xa [MCU2_0] 5.344377 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU2_0] 5.344398 s: SCICLIENT: Init ... Done !!! [MCU2_0] 5.344417 s: UDMA: Init ... !!! [MCU2_0] 5.345286 s: UDMA: Init ... Done !!! [MCU2_0] 5.345325 s: UDMA: Init for CSITX/CSIRX ... !!! [MCU2_0] 5.345758 s: UDMA: Init for CSITX/CSIRX ... Done !!! [MCU2_0] 5.345798 s: MEM: Init ... !!! [MCU2_0] 5.345823 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bb000000 of size 6291456 bytes !!! [MCU2_0] 5.345874 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000000) @ 60000000 of size 262144 bytes !!! [MCU2_0] 5.345911 s: MEM: Created heap (DDR_CACHE_WT_MEM, id=7, flags=0x00000000) @ bb600000 of size 2097152 bytes !!! [MCU2_0] 5.345948 s: MEM: Init ... Done !!! [MCU2_0] 5.345966 s: IPC: Init ... !!! [MCU2_0] 5.346003 s: IPC: 11 CPUs participating in IPC !!! [MCU2_0] 5.346036 s: IPC: Waiting for HLOS to be ready ... !!! [MCU2_0] 13.889764 s: IPC: HLOS is ready !!! [MCU2_0] 13.897597 s: IPC: Init ... Done !!! [MCU2_0] 13.897650 s: APP: Syncing with 10 CPUs ... !!! [MCU2_0] 14.761713 s: APP: Syncing with 10 CPUs ... Done !!! [MCU2_0] 14.761744 s: REMOTE_SERVICE: Init ... !!! [MCU2_0] 14.762353 s: REMOTE_SERVICE: Init ... Done !!! [MCU2_0] 14.762397 s: FVID2: Init ... !!! [MCU2_0] 14.762450 s: FVID2: Init ... Done !!! [MCU2_0] 14.762473 s: SCICLIENT: Sciclient_pmSetModuleState module=275 state=2 [MCU2_0] 14.762657 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.762701 s: DSS: Init ... !!! [MCU2_0] 14.762720 s: DSS: Display type is eDP !!! [MCU2_0] 14.762739 s: DSS: M2M Path is enabled !!! [MCU2_0] 14.762762 s: DSS: SoC init ... !!! [MCU2_0] 14.762784 s: SCICLIENT: Sciclient_pmSetModuleState module=218 state=0 [MCU2_0] 14.762920 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.762947 s: SCICLIENT: Sciclient_pmSetModuleState module=404 state=2 [MCU2_0] 14.763212 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.763232 s: SCICLIENT: Sciclient_pmSetModuleState module=217 state=2 [MCU2_0] 14.763463 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.763486 s: SCICLIENT: Sciclient_pmSetModuleState module=404 state=2 [MCU2_0] 14.763663 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.763684 s: SCICLIENT: Sciclient_pmSetModuleState module=217 state=2 [MCU2_0] 14.763837 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.763859 s: SCICLIENT: Sciclient_pmSetModuleState module=218 state=0 [MCU2_0] 14.764236 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.764264 s: SCICLIENT: Sciclient_pmSetModuleClkFreq module=218 clk=3 freq=148500000 [MCU2_0] 14.764646 s: SCICLIENT: Sciclient_pmSetModuleClkFreq success [MCU2_0] 14.764673 s: SCICLIENT: Sciclient_pmModuleClkRequest module=218 clk=3 state=2 flag=2 [MCU2_0] 14.765018 s: SCICLIENT: Sciclient_pmModuleClkRequest success [MCU2_0] 14.765040 s: SCICLIENT: Sciclient_pmSetModuleState module=218 state=2 [MCU2_0] 14.765473 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 14.765494 s: DSS: SoC init ... Done !!! [MCU2_0] 14.765512 s: DSS: Board init ... !!! [MCU2_0] 14.765529 s: DSS: Turning on DP_PWR pin for eDP adapters ... !!! [MCU2_0] 15.250174 s: DSS: ERROR: Turning on DP_PWR pin for eDP adapters failed !!! [MCU2_0] 15.250210 s: DSS: Board init ... Done !!! [MCU2_0] 15.268110 s: DSS: Init ... Done !!! [MCU2_0] 15.268155 s: VHWA: VPAC Init ... !!! [MCU2_0] 15.268174 s: SCICLIENT: Sciclient_pmSetModuleState module=399 state=2 [MCU2_0] 15.268281 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.268309 s: VHWA: LDC Init ... !!! [MCU2_0] 15.269985 s: VHWA: LDC Init ... Done !!! [MCU2_0] 15.270024 s: VHWA: MSC Init ... !!! [MCU2_0] 15.275931 s: VHWA: MSC Init ... Done !!! [MCU2_0] 15.275970 s: VHWA: NF Init ... !!! [MCU2_0] 15.276820 s: VHWA: NF Init ... Done !!! [MCU2_0] 15.276853 s: VHWA: VISS Init ... !!! [MCU2_0] 15.282326 s: VHWA: VISS Init ... Done !!! [MCU2_0] 15.282368 s: VHWA: VPAC Init ... Done !!! [MCU2_0] 15.282405 s: VX_ZONE_INIT:Enabled [MCU2_0] 15.282426 s: VX_ZONE_ERROR:Enabled [MCU2_0] 15.282444 s: VX_ZONE_WARNING:Enabled [MCU2_0] 15.283809 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU2-0 [MCU2_0] 15.283916 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC_NF [MCU2_0] 15.284011 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC_LDC1 [MCU2_0] 15.284109 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC_MSC1 [MCU2_0] 15.284211 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC_MSC2 [MCU2_0] 15.284349 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC_VISS1 [MCU2_0] 15.284463 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE1 [MCU2_0] 15.284565 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE2 [MCU2_0] 15.284710 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE3 [MCU2_0] 15.284839 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE4 [MCU2_0] 15.284951 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE5 [MCU2_0] 15.285053 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE6 [MCU2_0] 15.285146 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE7 [MCU2_0] 15.285246 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE8 [MCU2_0] 15.285338 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE9 [MCU2_0] 15.285433 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE10 [MCU2_0] 15.285546 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE11 [MCU2_0] 15.285664 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CAPTURE12 [MCU2_0] 15.285775 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DISPLAY1 [MCU2_0] 15.285888 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DISPLAY2 [MCU2_0] 15.285982 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CSITX [MCU2_0] 15.286085 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target CSITX2 [MCU2_0] 15.286174 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSS_M2M1 [MCU2_0] 15.286255 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSS_M2M2 [MCU2_0] 15.286332 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSS_M2M3 [MCU2_0] 15.286443 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSS_M2M4 [MCU2_0] 15.286481 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU2_0] 15.286506 s: APP: OpenVX Target kernel init ... !!! [MCU2_0] 15.293961 s: APP: OpenVX Target kernel init ... Done !!! [MCU2_0] 15.294001 s: CSI2RX: Init ... !!! [MCU2_0] 15.294020 s: SCICLIENT: Sciclient_pmSetModuleState module=189 state=2 [MCU2_0] 15.294095 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294122 s: SCICLIENT: Sciclient_pmSetModuleState module=72 state=2 [MCU2_0] 15.294208 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294231 s: SCICLIENT: Sciclient_pmSetModuleState module=73 state=2 [MCU2_0] 15.294307 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294329 s: SCICLIENT: Sciclient_pmSetModuleState module=74 state=2 [MCU2_0] 15.294411 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294432 s: SCICLIENT: Sciclient_pmSetModuleState module=212 state=2 [MCU2_0] 15.294491 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294511 s: SCICLIENT: Sciclient_pmSetModuleState module=213 state=2 [MCU2_0] 15.294564 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294585 s: SCICLIENT: Sciclient_pmSetModuleState module=214 state=2 [MCU2_0] 15.294635 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294830 s: CSI2RX: Init ... Done !!! [MCU2_0] 15.294853 s: CSI2TX: Init ... !!! [MCU2_0] 15.294871 s: SCICLIENT: Sciclient_pmSetModuleState module=189 state=2 [MCU2_0] 15.294921 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.294943 s: SCICLIENT: Sciclient_pmSetModuleState module=75 state=2 [MCU2_0] 15.295003 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.295026 s: SCICLIENT: Sciclient_pmSetModuleState module=76 state=2 [MCU2_0] 15.295094 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.295115 s: SCICLIENT: Sciclient_pmSetModuleState module=402 state=2 [MCU2_0] 15.295163 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.295184 s: SCICLIENT: Sciclient_pmSetModuleState module=403 state=2 [MCU2_0] 15.295243 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_0] 15.295319 s: CSI2TX: Init ... Done !!! [MCU2_0] 15.295340 s: ISS: Init ... !!! [MCU2_0] 15.295378 s: IssSensor_IMX390_MAX9295A_Init start [MCU2_0] 15.295406 s: IssSensor_IMX390_MAX9295A_Init end [MCU2_0] 15.295427 s: IssSensor_Init ... Done !!! [MCU2_0] 15.295486 s: IttRemoteServer_Init ... Done !!! [MCU2_0] 15.295508 s: ISS: Init ... Done !!! [MCU2_0] 15.295526 s: VISS REMOTE SERVICE: Init ... !!! [MCU2_0] 15.295576 s: VISS REMOTE SERVICE: Init ... Done !!! [MCU2_0] 15.295599 s: UDMA Copy: Init ... !!! [MCU2_0] 15.296528 s: UDMA Copy: Init ... Done !!! [MCU2_0] 15.296571 s: APP: Init ... Done !!! [MCU2_0] 15.296592 s: APP: Run ... !!! [MCU2_0] 15.296608 s: IPC: Starting echo test ... [MCU2_0] 15.296794 s: APP: Run ... Done !!! [MCU2_0] 15.298078 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[.] mcu3_1[.] mcu4_0[.] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298161 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[.] mcu4_0[.] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298233 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[.] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298300 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298364 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298429 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_0] 15.298497 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[.] c7x_4[.] [MCU2_0] 15.298562 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[.] [MCU2_0] 15.298627 s: IPC: Echo status: mpu1_0[x] mcu2_0[s] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU2_1] 5.404683 s: CIO: Init ... Done !!! [MCU2_1] 5.404737 s: ### CPU Frequency = 1000000000 Hz [MCU2_1] 5.404762 s: CPU is running FreeRTOS [MCU2_1] 5.404780 s: APP: Init ... !!! [MCU2_1] 5.404814 s: SCICLIENT: Init ... !!! [MCU2_1] 5.404929 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU2_1] 5.404958 s: SCICLIENT: DMSC FW revision 0xa [MCU2_1] 5.404979 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU2_1] 5.405000 s: SCICLIENT: Init ... Done !!! [MCU2_1] 5.405018 s: UDMA: Init ... !!! [MCU2_1] 5.405921 s: UDMA: Init ... Done !!! [MCU2_1] 5.405958 s: MEM: Init ... !!! [MCU2_1] 5.405982 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bb800000 of size 8388608 bytes !!! [MCU2_1] 5.406028 s: MEM: Init ... Done !!! [MCU2_1] 5.406046 s: IPC: Init ... !!! [MCU2_1] 5.406079 s: IPC: 11 CPUs participating in IPC !!! [MCU2_1] 5.406111 s: IPC: Waiting for HLOS to be ready ... !!! [MCU2_1] 13.891779 s: IPC: HLOS is ready !!! [MCU2_1] 13.899415 s: IPC: Init ... Done !!! [MCU2_1] 13.899460 s: APP: Syncing with 10 CPUs ... !!! [MCU2_1] 14.761715 s: APP: Syncing with 10 CPUs ... Done !!! [MCU2_1] 14.761744 s: REMOTE_SERVICE: Init ... !!! [MCU2_1] 14.762331 s: REMOTE_SERVICE: Init ... Done !!! [MCU2_1] 14.762369 s: FVID2: Init ... !!! [MCU2_1] 14.762407 s: FVID2: Init ... Done !!! [MCU2_1] 14.762433 s: VHWA: DMPAC: Init ... !!! [MCU2_1] 14.762451 s: SCICLIENT: Sciclient_pmSetModuleState module=92 state=2 [MCU2_1] 14.762558 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_1] 14.762582 s: SCICLIENT: Sciclient_pmSetModuleState module=96 state=2 [MCU2_1] 14.762686 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_1] 14.762712 s: VHWA: DOF Init ... !!! [MCU2_1] 14.769581 s: VHWA: DOF Init ... Done !!! [MCU2_1] 14.769614 s: VHWA: SDE Init ... !!! [MCU2_1] 14.771631 s: VHWA: SDE Init ... Done !!! [MCU2_1] 14.771659 s: VHWA: DMPAC: Init ... Done !!! [MCU2_1] 14.771694 s: VX_ZONE_INIT:Enabled [MCU2_1] 14.771713 s: VX_ZONE_ERROR:Enabled [MCU2_1] 14.771732 s: VX_ZONE_WARNING:Enabled [MCU2_1] 14.773105 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU2-1 [MCU2_1] 14.773199 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DMPAC_SDE [MCU2_1] 14.773282 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DMPAC_DOF [MCU2_1] 14.773319 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU2_1] 14.773344 s: APP: OpenVX Target kernel init ... !!! [MCU2_1] 14.773488 s: APP: OpenVX Target kernel init ... Done !!! [MCU2_1] 14.773519 s: APP: Init ... Done !!! [MCU2_1] 14.773538 s: APP: Run ... !!! [MCU2_1] 14.773555 s: IPC: Starting echo test ... [MCU2_1] 14.773708 s: APP: Run ... Done !!! [MCU2_1] 14.774703 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_1] 14.774778 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_1] 14.774844 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_1] 14.774911 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[.] c7x_3[.] c7x_4[.] [MCU2_1] 14.774978 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[.] c7x_4[.] [MCU2_1] 14.775044 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[.] [MCU2_1] 14.775112 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU2_1] 14.791890 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU2_1] 15.297342 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[s] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_0] 5.478842 s: CIO: Init ... Done !!! [MCU3_0] 5.478898 s: ### CPU Frequency = 1000000000 Hz [MCU3_0] 5.478925 s: CPU is running FreeRTOS [MCU3_0] 5.478941 s: APP: Init ... !!! [MCU3_0] 5.478970 s: SCICLIENT: Init ... !!! [MCU3_0] 5.479087 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU3_0] 5.479119 s: SCICLIENT: DMSC FW revision 0xa [MCU3_0] 5.479138 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU3_0] 5.479159 s: SCICLIENT: Init ... Done !!! [MCU3_0] 5.479178 s: MEM: Init ... !!! [MCU3_0] 5.479201 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bc000000 of size 8388608 bytes !!! [MCU3_0] 5.479243 s: MEM: Init ... Done !!! [MCU3_0] 5.479260 s: IPC: Init ... !!! [MCU3_0] 5.479292 s: IPC: 11 CPUs participating in IPC !!! [MCU3_0] 5.479323 s: IPC: Waiting for HLOS to be ready ... !!! [MCU3_0] 13.897669 s: IPC: HLOS is ready !!! [MCU3_0] 13.904800 s: IPC: Init ... Done !!! [MCU3_0] 13.904847 s: APP: Syncing with 10 CPUs ... !!! [MCU3_0] 14.761710 s: APP: Syncing with 10 CPUs ... Done !!! [MCU3_0] 14.761740 s: REMOTE_SERVICE: Init ... !!! [MCU3_0] 14.762326 s: REMOTE_SERVICE: Init ... Done !!! [MCU3_0] 14.762377 s: VX_ZONE_INIT:Enabled [MCU3_0] 14.762397 s: VX_ZONE_ERROR:Enabled [MCU3_0] 14.762416 s: VX_ZONE_WARNING:Enabled [MCU3_0] 14.763749 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU3-0 [MCU3_0] 14.763793 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU3_0] 14.763821 s: APP: OpenVX Target kernel init ... !!! [MCU3_0] 14.763848 s: APP: OpenVX Target kernel init ... Done !!! [MCU3_0] 14.763870 s: APP: Init ... Done !!! [MCU3_0] 14.763887 s: APP: Run ... !!! [MCU3_0] 14.763903 s: IPC: Starting echo test ... [MCU3_0] 14.764118 s: APP: Run ... Done !!! [MCU3_0] 14.764839 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[.] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_0] 14.765001 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[.] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_0] 14.765123 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_0] 14.767025 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[.] c7x_4[P] [MCU3_0] 14.767116 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[P] c7x_4[P] [MCU3_0] 14.767611 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[s] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_0] 14.774146 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[s] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_0] 14.791864 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[s] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_0] 15.297374 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[s] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_1] 5.554476 s: CIO: Init ... Done !!! [MCU3_1] 5.554535 s: ### CPU Frequency = 1000000000 Hz [MCU3_1] 5.554563 s: CPU is running FreeRTOS [MCU3_1] 5.554581 s: APP: Init ... !!! [MCU3_1] 5.554610 s: SCICLIENT: Init ... !!! [MCU3_1] 5.554725 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU3_1] 5.554758 s: SCICLIENT: DMSC FW revision 0xa [MCU3_1] 5.554778 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU3_1] 5.554800 s: SCICLIENT: Init ... Done !!! [MCU3_1] 5.554819 s: MEM: Init ... !!! [MCU3_1] 5.554843 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bc800000 of size 8388608 bytes !!! [MCU3_1] 5.554888 s: MEM: Init ... Done !!! [MCU3_1] 5.554906 s: IPC: Init ... !!! [MCU3_1] 5.554936 s: IPC: 11 CPUs participating in IPC !!! [MCU3_1] 5.554968 s: IPC: Waiting for HLOS to be ready ... !!! [MCU3_1] 13.898959 s: IPC: HLOS is ready !!! [MCU3_1] 13.905931 s: IPC: Init ... Done !!! [MCU3_1] 13.905979 s: APP: Syncing with 10 CPUs ... !!! [MCU3_1] 14.761712 s: APP: Syncing with 10 CPUs ... Done !!! [MCU3_1] 14.761742 s: REMOTE_SERVICE: Init ... !!! [MCU3_1] 14.762341 s: REMOTE_SERVICE: Init ... Done !!! [MCU3_1] 14.762397 s: VX_ZONE_INIT:Enabled [MCU3_1] 14.762415 s: VX_ZONE_ERROR:Enabled [MCU3_1] 14.762435 s: VX_ZONE_WARNING:Enabled [MCU3_1] 14.763775 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU3-1 [MCU3_1] 14.763820 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU3_1] 14.763846 s: APP: OpenVX Target kernel init ... !!! [MCU3_1] 14.763869 s: APP: OpenVX Target kernel init ... Done !!! [MCU3_1] 14.763889 s: APP: Init ... Done !!! [MCU3_1] 14.763906 s: APP: Run ... !!! [MCU3_1] 14.763922 s: IPC: Starting echo test ... [MCU3_1] 14.764135 s: APP: Run ... Done !!! [MCU3_1] 14.764690 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[s] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_1] 14.764927 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_1] 14.765023 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU3_1] 14.767052 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[.] c7x_4[P] [MCU3_1] 14.767130 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[P] c7x_4[P] [MCU3_1] 14.767598 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_1] 14.774165 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[s] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_1] 14.791874 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[s] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU3_1] 15.297383 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[s] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_0] 5.646716 s: CIO: Init ... Done !!! [MCU4_0] 5.646777 s: ### CPU Frequency = 1000000000 Hz [MCU4_0] 5.646802 s: CPU is running FreeRTOS [MCU4_0] 5.646820 s: APP: Init ... !!! [MCU4_0] 5.646854 s: SCICLIENT: Init ... !!! [MCU4_0] 5.646967 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU4_0] 5.646999 s: SCICLIENT: DMSC FW revision 0xa [MCU4_0] 5.647020 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU4_0] 5.647042 s: SCICLIENT: Init ... Done !!! [MCU4_0] 5.647062 s: UDMA: Init ... !!! [MCU4_0] 5.647976 s: UDMA: Init ... Done !!! [MCU4_0] 5.648012 s: MEM: Init ... !!! [MCU4_0] 5.648038 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bd000000 of size 6291456 bytes !!! [MCU4_0] 5.648086 s: MEM: Created heap (DDR_CACHE_WT_MEM, id=7, flags=0x00000000) @ bd600000 of size 2097152 bytes !!! [MCU4_0] 5.648124 s: MEM: Init ... Done !!! [MCU4_0] 5.648143 s: IPC: Init ... !!! [MCU4_0] 5.648181 s: IPC: 11 CPUs participating in IPC !!! [MCU4_0] 5.648211 s: IPC: Waiting for HLOS to be ready ... !!! [MCU4_0] 14.028510 s: IPC: HLOS is ready !!! [MCU4_0] 14.034844 s: IPC: Init ... Done !!! [MCU4_0] 14.034892 s: APP: Syncing with 10 CPUs ... !!! [MCU4_0] 14.761710 s: APP: Syncing with 10 CPUs ... Done !!! [MCU4_0] 14.761737 s: REMOTE_SERVICE: Init ... !!! [MCU4_0] 14.762353 s: REMOTE_SERVICE: Init ... Done !!! [MCU4_0] 14.762388 s: FVID2: Init ... !!! [MCU4_0] 14.762427 s: FVID2: Init ... Done !!! [MCU4_0] 14.762447 s: VHWA: VPAC Init ... !!! [MCU4_0] 14.762465 s: SCICLIENT: Sciclient_pmSetModuleState module=400 state=2 [MCU4_0] 14.762625 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU4_0] 14.762648 s: VHWA: LDC Init ... !!! [MCU4_0] 14.767292 s: VHWA: LDC Init ... Done !!! [MCU4_0] 14.767328 s: VHWA: MSC Init ... !!! [MCU4_0] 14.774774 s: VHWA: MSC Init ... Done !!! [MCU4_0] 14.774809 s: VHWA: NF Init ... !!! [MCU4_0] 14.775651 s: VHWA: NF Init ... Done !!! [MCU4_0] 14.775678 s: VHWA: VISS Init ... !!! [MCU4_0] 14.781128 s: VHWA: VISS Init ... Done !!! [MCU4_0] 14.781169 s: VHWA: VPAC Init ... Done !!! [MCU4_0] 14.781204 s: VX_ZONE_INIT:Enabled [MCU4_0] 14.781227 s: VX_ZONE_ERROR:Enabled [MCU4_0] 14.781245 s: VX_ZONE_WARNING:Enabled [MCU4_0] 14.782480 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU4-0 [MCU4_0] 14.782578 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC2_NF [MCU4_0] 14.782659 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC2_LDC1 [MCU4_0] 14.782731 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC2_MSC1 [MCU4_0] 14.782818 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC2_MSC2 [MCU4_0] 14.782961 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target VPAC2_VISS1 [MCU4_0] 14.782999 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU4_0] 14.783023 s: APP: OpenVX Target kernel init ... !!! [MCU4_0] 14.790041 s: APP: OpenVX Target kernel init ... Done !!! [MCU4_0] 14.790079 s: VISS REMOTE SERVICE: Init ... !!! [MCU4_0] 14.790136 s: VISS REMOTE SERVICE: Init ... Done !!! [MCU4_0] 14.790159 s: UDMA Copy: Init ... !!! [MCU4_0] 14.791113 s: UDMA Copy: Init ... Done !!! [MCU4_0] 14.791149 s: APP: Init ... Done !!! [MCU4_0] 14.791170 s: APP: Run ... !!! [MCU4_0] 14.791185 s: IPC: Starting echo test ... [MCU4_0] 14.791353 s: APP: Run ... Done !!! [MCU4_0] 14.792484 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[.] mcu3_1[.] mcu4_0[s] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU4_0] 14.792567 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[.] mcu4_0[s] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU4_0] 14.792634 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[.] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU4_0] 14.792700 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[.] c7x_2[.] c7x_3[.] c7x_4[.] [MCU4_0] 14.792763 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[P] c7x_2[.] c7x_3[.] c7x_4[.] [MCU4_0] 14.792829 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[.] c7x_4[.] [MCU4_0] 14.792894 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[.] [MCU4_0] 14.792959 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_0] 15.297387 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[s] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_1] 5.712005 s: CIO: Init ... Done !!! [MCU4_1] 5.712069 s: ### CPU Frequency = 1000000000 Hz [MCU4_1] 5.712097 s: CPU is running FreeRTOS [MCU4_1] 5.712115 s: APP: Init ... !!! [MCU4_1] 5.712149 s: SCICLIENT: Init ... !!! [MCU4_1] 5.712268 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [MCU4_1] 5.712303 s: SCICLIENT: DMSC FW revision 0xa [MCU4_1] 5.712325 s: SCICLIENT: DMSC FW ABI revision 4.0 [MCU4_1] 5.712348 s: SCICLIENT: Init ... Done !!! [MCU4_1] 5.712366 s: MEM: Init ... !!! [MCU4_1] 5.712390 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ bd800000 of size 8388608 bytes !!! [MCU4_1] 5.712433 s: MEM: Init ... Done !!! [MCU4_1] 5.712451 s: IPC: Init ... !!! [MCU4_1] 5.712482 s: IPC: 11 CPUs participating in IPC !!! [MCU4_1] 5.712514 s: IPC: Waiting for HLOS to be ready ... !!! [MCU4_1] 14.755357 s: IPC: HLOS is ready !!! [MCU4_1] 14.761632 s: IPC: Init ... Done !!! [MCU4_1] 14.761674 s: APP: Syncing with 10 CPUs ... !!! [MCU4_1] 14.761710 s: APP: Syncing with 10 CPUs ... Done !!! [MCU4_1] 14.761736 s: REMOTE_SERVICE: Init ... !!! [MCU4_1] 14.762391 s: REMOTE_SERVICE: Init ... Done !!! [MCU4_1] 14.762448 s: VX_ZONE_INIT:Enabled [MCU4_1] 14.762467 s: VX_ZONE_ERROR:Enabled [MCU4_1] 14.762485 s: VX_ZONE_WARNING:Enabled [MCU4_1] 14.763831 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MCU4-1 [MCU4_1] 14.763867 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [MCU4_1] 14.763892 s: APP: OpenVX Target kernel init ... !!! [MCU4_1] 14.763912 s: APP: OpenVX Target kernel init ... Done !!! [MCU4_1] 14.763934 s: APP: Init ... Done !!! [MCU4_1] 14.763952 s: APP: Run ... !!! [MCU4_1] 14.763968 s: IPC: Starting echo test ... [MCU4_1] 14.764189 s: APP: Run ... Done !!! [MCU4_1] 14.764930 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[.] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU4_1] 14.765035 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[.] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU4_1] 14.765137 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[x] c7x_3[x] c7x_4[x] [MCU4_1] 14.767049 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[x] c7x_3[P] c7x_4[.] [MCU4_1] 14.767129 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[x] c7x_3[P] c7x_4[P] [MCU4_1] 14.767618 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_1] 14.774174 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[s] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_1] 14.791883 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[s] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [MCU4_1] 15.297396 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[s] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[P] [C7x_1 ] 5.875559 s: CIO: Init ... Done !!! [C7x_1 ] 5.875575 s: ### CPU Frequency = 1000000000 Hz [C7x_1 ] 5.875587 s: CPU is running FreeRTOS [C7x_1 ] 5.875597 s: APP: Init ... !!! [C7x_1 ] 5.875606 s: SCICLIENT: Init ... !!! [C7x_1 ] 5.875711 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [C7x_1 ] 5.875725 s: SCICLIENT: DMSC FW revision 0xa [C7x_1 ] 5.875736 s: SCICLIENT: DMSC FW ABI revision 4.0 [C7x_1 ] 5.875748 s: SCICLIENT: Init ... Done !!! [C7x_1 ] 5.875758 s: UDMA: Init ... !!! [C7x_1 ] 5.876633 s: UDMA: Init ... Done !!! [C7x_1 ] 5.876645 s: MEM: Init ... !!! [C7x_1 ] 5.876657 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 108000000 of size 134217728 bytes !!! [C7x_1 ] 5.876679 s: MEM: Init ... Done !!! [C7x_1 ] 5.876690 s: IPC: Init ... !!! [C7x_1 ] 5.876704 s: IPC: 11 CPUs participating in IPC !!! [C7x_1 ] 5.876720 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_1 ] 13.743092 s: IPC: HLOS is ready !!! [C7x_1 ] 13.747105 s: IPC: Init ... Done !!! [C7x_1 ] 13.747122 s: APP: Syncing with 10 CPUs ... !!! [C7x_1 ] 14.761714 s: APP: Syncing with 10 CPUs ... Done !!! [C7x_1 ] 14.761734 s: REMOTE_SERVICE: Init ... !!! [C7x_1 ] 14.761916 s: REMOTE_SERVICE: Init ... Done !!! [C7x_1 ] 14.761943 s: VX_ZONE_INIT:Enabled [C7x_1 ] 14.762000 s: VX_ZONE_ERROR:Enabled [C7x_1 ] 14.762014 s: VX_ZONE_WARNING:Enabled [C7x_1 ] 14.762449 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1 [C7x_1 ] 14.762519 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_2 [C7x_1 ] 14.762588 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_3 [C7x_1 ] 14.762660 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_4 [C7x_1 ] 14.762733 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_5 [C7x_1 ] 14.762807 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_6 [C7x_1 ] 14.762895 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_7 [C7x_1 ] 14.762989 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-1_PRI_8 [C7x_1 ] 14.763016 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [C7x_1 ] 14.763032 s: APP: OpenVX Target kernel init ... !!! [C7x_1 ] 14.763720 s: APP: OpenVX Target kernel init ... Done !!! [C7x_1 ] 14.763736 s: APP: Init ... Done !!! [C7x_1 ] 14.763746 s: APP: Run ... !!! [C7x_1 ] 14.763756 s: IPC: Starting echo test ... [C7x_1 ] 14.763937 s: APP: Run ... Done !!! [C7x_1 ] 14.764724 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[.] mcu4_0[x] mcu4_1[.] c7x_1[s] c7x_2[x] c7x_3[x] c7x_4[x] [C7x_1 ] 14.764846 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[s] c7x_2[x] c7x_3[x] c7x_4[x] [C7x_1 ] 14.764903 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[s] c7x_2[x] c7x_3[x] c7x_4[x] [C7x_1 ] 14.767053 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[s] c7x_2[x] c7x_3[P] c7x_4[.] [C7x_1 ] 14.767113 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[s] c7x_2[x] c7x_3[P] c7x_4[P] [C7x_1 ] 14.767591 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[s] c7x_2[P] c7x_3[P] c7x_4[P] [C7x_1 ] 14.774190 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[s] c7x_2[P] c7x_3[P] c7x_4[P] [C7x_1 ] 14.791901 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[s] c7x_2[P] c7x_3[P] c7x_4[P] [C7x_1 ] 15.297407 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[s] c7x_2[P] c7x_3[P] c7x_4[P] [C7x_2 ] 5.990181 s: CIO: Init ... Done !!! [C7x_2 ] 5.990198 s: ### CPU Frequency = 1000000000 Hz [C7x_2 ] 5.990211 s: CPU is running FreeRTOS [C7x_2 ] 5.990220 s: APP: Init ... !!! [C7x_2 ] 5.990229 s: SCICLIENT: Init ... !!! [C7x_2 ] 5.990333 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [C7x_2 ] 5.990347 s: SCICLIENT: DMSC FW revision 0xa [C7x_2 ] 5.990359 s: SCICLIENT: DMSC FW ABI revision 4.0 [C7x_2 ] 5.990371 s: SCICLIENT: Init ... Done !!! [C7x_2 ] 5.990381 s: UDMA: Init ... !!! [C7x_2 ] 5.991273 s: UDMA: Init ... Done !!! [C7x_2 ] 5.991285 s: MEM: Init ... !!! [C7x_2 ] 5.991297 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 108000000 of size 134217728 bytes !!! [C7x_2 ] 5.991319 s: MEM: Init ... Done !!! [C7x_2 ] 5.991329 s: IPC: Init ... !!! [C7x_2 ] 5.991344 s: IPC: 11 CPUs participating in IPC !!! [C7x_2 ] 5.991360 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_2 ] 13.868633 s: IPC: HLOS is ready !!! [C7x_2 ] 13.873061 s: IPC: Init ... Done !!! [C7x_2 ] 13.873077 s: APP: Syncing with 10 CPUs ... !!! [C7x_2 ] 14.761714 s: APP: Syncing with 10 CPUs ... Done !!! [C7x_2 ] 14.761735 s: REMOTE_SERVICE: Init ... !!! [C7x_2 ] 14.761922 s: REMOTE_SERVICE: Init ... Done !!! [C7x_2 ] 14.761948 s: VX_ZONE_INIT:Enabled [C7x_2 ] 14.762002 s: VX_ZONE_ERROR:Enabled [C7x_2 ] 14.762018 s: VX_ZONE_WARNING:Enabled [C7x_2 ] 14.762913 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2 [C7x_2 ] 14.763010 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_2 [C7x_2 ] 14.763090 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_3 [C7x_2 ] 14.763163 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_4 [C7x_2 ] 14.763232 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_5 [C7x_2 ] 14.763305 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_6 [C7x_2 ] 14.763375 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_7 [C7x_2 ] 14.763449 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-2_PRI_8 [C7x_2 ] 14.763473 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [C7x_2 ] 14.763488 s: APP: OpenVX Target kernel init ... !!! [C7x_2 ] 14.764752 s: APP: OpenVX Target kernel init ... Done !!! [C7x_2 ] 14.764771 s: UDMA Copy: Init ... !!! [C7x_2 ] 14.766860 s: UDMA Copy: Init ... Done !!! [C7x_2 ] 14.766878 s: APP: Init ... Done !!! [C7x_2 ] 14.766888 s: APP: Run ... !!! [C7x_2 ] 14.766898 s: IPC: Starting echo test ... [C7x_2 ] 14.767073 s: APP: Run ... Done !!! [C7x_2 ] 14.767735 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[.] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[s] c7x_3[.] c7x_4[.] [C7x_2 ] 14.767782 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[s] c7x_3[.] c7x_4[.] [C7x_2 ] 14.767826 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[s] c7x_3[.] c7x_4[P] [C7x_2 ] 14.767868 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[s] c7x_3[.] c7x_4[P] [C7x_2 ] 14.767910 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[s] c7x_3[.] c7x_4[P] [C7x_2 ] 14.767952 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[s] c7x_3[P] c7x_4[P] [C7x_2 ] 14.774198 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[s] c7x_3[P] c7x_4[P] [C7x_2 ] 14.791906 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[s] c7x_3[P] c7x_4[P] [C7x_2 ] 15.297414 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[s] c7x_3[P] c7x_4[P] [C7x_3 ] 6.101780 s: CIO: Init ... Done !!! [C7x_3 ] 6.101798 s: ### CPU Frequency = 1000000000 Hz [C7x_3 ] 6.101811 s: CPU is running FreeRTOS [C7x_3 ] 6.101820 s: APP: Init ... !!! [C7x_3 ] 6.101829 s: SCICLIENT: Init ... !!! [C7x_3 ] 6.101933 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [C7x_3 ] 6.101948 s: SCICLIENT: DMSC FW revision 0xa [C7x_3 ] 6.101959 s: SCICLIENT: DMSC FW ABI revision 4.0 [C7x_3 ] 6.101971 s: SCICLIENT: Init ... Done !!! [C7x_3 ] 6.101981 s: UDMA: Init ... !!! [C7x_3 ] 6.102864 s: UDMA: Init ... Done !!! [C7x_3 ] 6.102876 s: MEM: Init ... !!! [C7x_3 ] 6.102888 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 108000000 of size 134217728 bytes !!! [C7x_3 ] 6.102911 s: MEM: Init ... Done !!! [C7x_3 ] 6.102920 s: IPC: Init ... !!! [C7x_3 ] 6.102935 s: IPC: 11 CPUs participating in IPC !!! [C7x_3 ] 6.102950 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_3 ] 13.871331 s: IPC: HLOS is ready !!! [C7x_3 ] 13.876051 s: IPC: Init ... Done !!! [C7x_3 ] 13.876068 s: APP: Syncing with 10 CPUs ... !!! [C7x_3 ] 14.761714 s: APP: Syncing with 10 CPUs ... Done !!! [C7x_3 ] 14.761736 s: REMOTE_SERVICE: Init ... !!! [C7x_3 ] 14.761934 s: REMOTE_SERVICE: Init ... Done !!! [C7x_3 ] 14.761961 s: VX_ZONE_INIT:Enabled [C7x_3 ] 14.761974 s: VX_ZONE_ERROR:Enabled [C7x_3 ] 14.761986 s: VX_ZONE_WARNING:Enabled [C7x_3 ] 14.762475 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3 [C7x_3 ] 14.762554 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_2 [C7x_3 ] 14.762632 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_3 [C7x_3 ] 14.762709 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_4 [C7x_3 ] 14.762786 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_5 [C7x_3 ] 14.762890 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_6 [C7x_3 ] 14.762993 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_7 [C7x_3 ] 14.763079 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-3_PRI_8 [C7x_3 ] 14.763106 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [C7x_3 ] 14.763121 s: APP: OpenVX Target kernel init ... !!! [C7x_3 ] 14.763769 s: APP: OpenVX Target kernel init ... Done !!! [C7x_3 ] 14.763795 s: UDMA Copy: Init ... !!! [C7x_3 ] 14.766294 s: UDMA Copy: Init ... Done !!! [C7x_3 ] 14.766311 s: APP: Init ... Done !!! [C7x_3 ] 14.766322 s: APP: Run ... !!! [C7x_3 ] 14.766332 s: IPC: Starting echo test ... [C7x_3 ] 14.766502 s: APP: Run ... Done !!! [C7x_3 ] 14.767256 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[.] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[s] c7x_4[.] [C7x_3 ] 14.767307 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[s] c7x_4[.] [C7x_3 ] 14.767353 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[s] c7x_4[.] [C7x_3 ] 14.767397 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[s] c7x_4[.] [C7x_3 ] 14.767456 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[s] c7x_4[P] [C7x_3 ] 14.767653 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[s] c7x_4[P] [C7x_3 ] 14.774208 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[s] c7x_4[P] [C7x_3 ] 14.791916 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[s] c7x_4[P] [C7x_3 ] 15.297424 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[s] c7x_4[P] [C7x_4 ] 6.225842 s: CIO: Init ... Done !!! [C7x_4 ] 6.225859 s: ### CPU Frequency = 1000000000 Hz [C7x_4 ] 6.225872 s: CPU is running FreeRTOS [C7x_4 ] 6.225881 s: APP: Init ... !!! [C7x_4 ] 6.225890 s: SCICLIENT: Init ... !!! [C7x_4 ] 6.225995 s: SCICLIENT: DMSC FW version [10.0.8--v10.00.08 (Fiery Fox)] [C7x_4 ] 6.226010 s: SCICLIENT: DMSC FW revision 0xa [C7x_4 ] 6.226021 s: SCICLIENT: DMSC FW ABI revision 4.0 [C7x_4 ] 6.226033 s: SCICLIENT: Init ... Done !!! [C7x_4 ] 6.226043 s: UDMA: Init ... !!! [C7x_4 ] 6.226912 s: UDMA: Init ... Done !!! [C7x_4 ] 6.226925 s: MEM: Init ... !!! [C7x_4 ] 6.226938 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 108000000 of size 134217728 bytes !!! [C7x_4 ] 6.226960 s: MEM: Init ... Done !!! [C7x_4 ] 6.226970 s: IPC: Init ... !!! [C7x_4 ] 6.226984 s: IPC: 11 CPUs participating in IPC !!! [C7x_4 ] 6.227000 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_4 ] 13.874187 s: IPC: HLOS is ready !!! [C7x_4 ] 13.878888 s: IPC: Init ... Done !!! [C7x_4 ] 13.878905 s: APP: Syncing with 10 CPUs ... !!! [C7x_4 ] 14.761715 s: APP: Syncing with 10 CPUs ... Done !!! [C7x_4 ] 14.761737 s: REMOTE_SERVICE: Init ... !!! [C7x_4 ] 14.761947 s: REMOTE_SERVICE: Init ... Done !!! [C7x_4 ] 14.761974 s: VX_ZONE_INIT:Enabled [C7x_4 ] 14.761986 s: VX_ZONE_ERROR:Enabled [C7x_4 ] 14.761998 s: VX_ZONE_WARNING:Enabled [C7x_4 ] 14.762487 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4 [C7x_4 ] 14.762566 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_2 [C7x_4 ] 14.762643 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_3 [C7x_4 ] 14.762721 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_4 [C7x_4 ] 14.762802 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_5 [C7x_4 ] 14.762894 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_6 [C7x_4 ] 14.762985 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_7 [C7x_4 ] 14.763079 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target DSP_C7-4_PRI_8 [C7x_4 ] 14.763104 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! [C7x_4 ] 14.763118 s: APP: OpenVX Target kernel init ... !!! [C7x_4 ] 14.763766 s: APP: OpenVX Target kernel init ... Done !!! [C7x_4 ] 14.763782 s: UDMA Copy: Init ... !!! [C7x_4 ] 14.766228 s: UDMA Copy: Init ... Done !!! [C7x_4 ] 14.766246 s: APP: Init ... Done !!! [C7x_4 ] 14.766257 s: APP: Run ... !!! [C7x_4 ] 14.766267 s: IPC: Starting echo test ... [C7x_4 ] 14.766433 s: APP: Run ... Done !!! [C7x_4 ] 14.767068 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[.] c7x_2[x] c7x_3[.] c7x_4[s] [C7x_4 ] 14.767158 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[.] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[.] c7x_4[s] [C7x_4 ] 14.767275 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[.] c7x_1[P] c7x_2[x] c7x_3[.] c7x_4[s] [C7x_4 ] 14.767319 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[.] c7x_4[s] [C7x_4 ] 14.767362 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[x] c7x_3[P] c7x_4[s] [C7x_4 ] 14.767622 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[x] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[s] [C7x_4 ] 14.774215 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[x] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[s] [C7x_4 ] 14.791923 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[s] [C7x_4 ] 15.297432 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_0[P] mcu3_1[P] mcu4_0[P] mcu4_1[P] c7x_1[P] c7x_2[P] c7x_3[P] c7x_4[s] root@j784s4-evm:/opt/vision_apps# root@j784s4-evm:/opt/vision_apps# root@j784s4-evm:/opt/vision_apps# root@j784s4-evm:/opt/vision_apps# ./run_app_single_cam.sh APP: Init ... !!! 36.404466 s: MEM: Init ... !!! 36.404529 s: MEM: Initialized DMA HEAP (fd=5) !!! 36.404676 s: MEM: Init ... Done !!! 36.404689 s: IPC: Init ... !!! 36.426822 s: IPC: Init ... Done !!! REMOTE_SERVICE: Init ... !!! REMOTE_SERVICE: Init ... Done !!! 36.435126 s: GTC Frequency = 200 MHz APP: Init ... Done !!! 36.435994 s: VX_ZONE_INIT:Enabled 36.436007 s: VX_ZONE_ERROR:Enabled 36.436015 s: VX_ZONE_WARNING:Enabled 36.438134 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MPU-0 36.438261 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MPU-1 36.438345 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MPU-2 36.438450 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:124] Added target MPU-3 36.438463 s: VX_ZONE_INIT:[tivxInitLocal:136] Initialization Done !!! 36.439771 s: VX_ZONE_INIT:[tivxHostInitLocal:106] Initialization Done for HOST !!! Invalid token [ ] sensor_selection = [0] Invalid token [ ] ldc_enable = [0] Invalid token [ ] num_frames_to_run = [1000000000] Invalid token [ ] is_interactive = [1] IttCtrl_registerHandler: command echo registered at location 0 IttCtrl_registerHandler: command iss_read_2a_params registered at location 1 IttCtrl_registerHandler: command iss_write_2a_params registered at location 2 IttCtrl_registerHandler: command iss_raw_save registered at location 3 IttCtrl_registerHandler: command iss_yuv_save registered at location 4 IttCtrl_registerHandler: command iss_read_sensor_reg registered at location 5 IttCtrl_registerHandler: command iss_write_sensor_reg registered at location 6 IttCtrl_registerHandler: command dev_ctrl registered at location 7 IttCtrl_registerHandler: command iss_send_dcc_file registered at location 8 NETWORK: Opened at IP Addr = 192.168.238.203, socket port=5000!!! tivxImagingLoadKernels done 36.447566 s: ISS: Enumerating sensors ... !!! [MCU2_0] 36.447715 s: [setupI2CInst]: Success to initialize I2C bus 4!!! [MCU2_0] 36.447773 s: [setupI2CInst]: Success to initialize I2C bus 5!!! [MCU2_0] 36.447804 s: Warning: deserializer config = NULL [MCU2_0] 36.447826 s: Warning: deserializer config = NULL 36.447915 s: ISS: Enumerating sensors ... found 0 : IMX390-UB953_D3 36.447925 s: ISS: Enumerating sensors ... found 1 : IMX390-UB953-DISCOVERY-NARROW 36.447932 s: ISS: Enumerating sensors ... found 2 : IMX390-UB953-DISCOVERY-MID 36.447939 s: ISS: Enumerating sensors ... found 3 : IMX390-UB953-DISCOVERY-WIDE 36.447946 s: ISS: Enumerating sensors ... found 4 : AR0233-UB953_MARS 36.447953 s: ISS: Enumerating sensors ... found 5 : AR0820-UB953_LI 36.447960 s: ISS: Enumerating sensors ... found 6 : UB9xxx_RAW12_TESTPATTERN 36.447966 s: ISS: Enumerating sensors ... found 7 : UB96x_UYVY_TESTPATTERN 36.447973 s: ISS: Enumerating sensors ... found 8 : GW_AR0233_UYVY 36.447979 s: ISS: Enumerating sensors ... found 9 : IMX390_MAX9295A Camera port 0 : Dual deser Cam 1 Camera port 1 : Dual deser Cam 2 Camera port 2 : Quad deser Cam 1 Camera port 3 : Quad deser Cam 2 Camera port 4 : Quad deser Cam 3 Camera port 5 : Quad deser Cam 4 Camera port 6-11 : Invalid Select camera port index 0-11 : 1 10 registered sensor drivers a : IMX390-UB953_D3 b : IMX390-UB953-DISCOVERY-NARROW c : IMX390-UB953-DISCOVERY-MID d : IMX390-UB953-DISCOVERY-WIDE e : AR0233-UB953_MARS f : AR0820-UB953_LI g : UB9xxx_RAW12_TESTPATTERN h : UB96x_UYVY_TESTPATTERN i : GW_AR0233_UYVY j : IMX390_MAX9295A Select a sensor above or press '0' to autodetect the sensor : Invalid selection . Try again 10 registered sensor drivers a : IMX390-UB953_D3 b : IMX390-UB953-DISCOVERY-NARROW c : IMX390-UB953-DISCOVERY-MID d : IMX390-UB953-DISCOVERY-WIDE e : AR0233-UB953_MARS f : AR0820-UB953_LI g : UB9xxx_RAW12_TESTPATTERN h : UB96x_UYVY_TESTPATTERN i : GW_AR0233_UYVY j : IMX390_MAX9295A Select a sensor above or press '0' to autodetect the sensor : j Sensor selected : IMX390_MAX9295A LDC Selection Yes(1)/No(0) : LDC Selection Yes(1)/No(0) : 0 Dual FCP enable for MV Selection Yes(1)/No(0) : Dual FCP enable for MV Selection Yes(1)/No(0) : 0 CAC Selection Yes(1)/No(0) : CAC Selection Yes(1)/No(0) : 0 app_init done Querying IMX390_MAX9295A 41.029277 s: ISS: Querying sensor [IMX390_MAX9295A] ... !!! 41.029387 s: ISS: Querying sensor [IMX390_MAX9295A] ... Done !!! WDR mode is not supported. Defaulting to linear obj->aewb_cfg.ae_mode = 2 obj->aewb_cfg.awb_mode = 2 Sensor DCC is NOT enabled Sensor width = 1936 Sensor height = 1096 Sensor DCC ID = 390 Sensor Supported Features = 0x20 Sensor Enabled Features = 0x20 41.029454 s: ISS: Initializing sensor [IMX390_MAX9295A], doing IM_SENSOR_CMD_PWRON ... !!! 41.029565 s: ISS: Initializing sensor [IMX390_MAX9295A], doing IM_SENSOR_CMD_CONFIG ... !!! [MCU2_0] 41.029506 s: IMX390_PowerOn : chId = 0x1 [MCU2_0] 41.125414 s: [IMX390_MAX9295A_Config : 424] [MCU2_0] 41.125440 s: IMX390_MAX9295A_Config Configuring Deserializer Pre... [MCU2_0] 41.403890 s: IMX390_MAX9295A_Config Configuring Serializer... [MCU2_0] 41.403927 s: [IMX390_MAX9295A_Config : 435] [MCU2_0] 41.406259 s: IMX390_MAX9295A_Config Configuring Deserialzier Post... [MCU2_0] 41.409034 s: IMX390_MAX9295A_Config Configuring Sensor... [MCU2_0] 41.409072 s: Configuring IMX390 imager 0x21.. Please wait till it finishes 41.948778 s: ISS: Initializing sensor [IMX390_MAX9295A] ... Done !!! Creating graph Initializing params for capture node local_capture_config.instId[0]2 local_capture_config.chInstMap[0] 2 local_capture_config.chVcNum[0] 0 capture_config = 0x0xffff9585db68 Creating capture node obj->capture_node = 0x0xffff957c12e8 Test data path is NULL. Defaulting to current folder read_test_image_raw : Unable to open file .//img_test.raw app_create_viss : sensor_dcc_id = 390 Invalid DCC size for VISS. Disabling DCC Invalid DCC size for 2A. Disabling DCC AEWB Set Reference done Display Set Target done vxSetGraphScheduleConfig done [MCU2_0] 41.965918 s: VX_ZONE_WARNING:[tivxVpacVissCreate:377] VISS H3A output is not generated due to DCC not being enabled Scaler is enabled [MCU2_0] 41.970819 s: VX_ZONE_WARNING:[tivxAewbCreate:1110] No DCC buffer passed. Disabling 2A app_create_graph exiting app_create_graph done ========================== Demo : Single Camera w/ 2A ========================== p: Print performance statistics s: Save Sensor RAW, VISS Output and H3A output images to File System e: Export performance statistics u: Update DCC from File System x: Exit Enter Choice: Unsupported command ========================== Demo : Single Camera w/ 2A ========================== p: Print performance statistics s: Save Sensor RAW, VISS Output and H3A output images to File System e: Export performance statistics u: Update DCC from File System x: Exit Enter Choice: 41.982210 s: ISS: Starting sensor [IMX390_MAX9295A] ... !!! [MCU2_0] 41.982372 s: [IMX390_MAX9295A_StreamOn : 464] desInstanceId 2 [MCU2_0] 41.982431 s: IMX390_MAX9295A_StreamOn 489 : i2cInstId(5) sensorI2cAddr(0x21) [MCU2_0] 42.088097 s: [IMX390_MAX9295A_StreamOn : 499] 42.098653 s: ISS: Starting sensor [IMX390_MAX9295A] ... Done !!! get_dcc_dir_size : Could not open directory or directory is empty /opt/vision_apps/dcc/IMX390_MAX9295A/wdr [MCU2_0] 42.097681 s: STATUS AFTER STREAM ON: [MCU2_0] 42.097904 s: READ from SERIALIZER 0x62, register(13) value (da) [MCU2_0] 42.098130 s: READ from SERIALIZER 0x62, VID_TX register(102) value (8a) [MCU2_0] 42.098356 s: READ from DESERIALIZER 0x28, register(13) value (22) [MCU2_0] 42.098580 s: READ from DESERIALIZER 0x28, register(5009) value (c8) [MCU2_0] 42.145927 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.178751 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.212049 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.245393 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.278727 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.312031 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.345385 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.378710 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.412061 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.445391 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.478712 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.512062 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.545392 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.578709 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.612047 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.645377 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.678697 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.712045 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.745364 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.778710 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.812031 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.845369 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.878692 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.912039 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.945368 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 42.978685 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.012028 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.045362 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.078703 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.112029 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.145356 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.178707 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.212028 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.245357 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.278689 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 Unsupported command ========================== Demo : Single Camera w/ 2A ========================== p: Print performance statistics s: Save Sensor RAW, VISS Output and H3A output images to File System e: Export performance statistics u: Update DCC from File System x: Exit Enter Choice: [MCU2_0] 43.312032 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.345348 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.378699 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.412036 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.445366 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.478704 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.512030 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.545358 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.578696 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.612025 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.645344 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.678678 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.712007 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 Unsupported command ========================== Demo : Single Camera w/ 2A ========================== p: Print performance statistics s: Save Sensor RAW, VISS Output and H3A output images to File System e: Export performance statistics u: Update DCC from File System x: Exit Enter Choice: [MCU2_0] 43.745353 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.778695 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.812019 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.845344 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.878667 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.912007 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.945343 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 43.978672 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.011993 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.045326 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 Unsupported command ========================== Demo : Single Camera w/ 2A ========================== p: Print performance statistics s: Save Sensor RAW, VISS Output and H3A output images to File System e: Export performance statistics u: Update DCC from File System x: Exit Enter Choice: [MCU2_0] 44.078662 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.112002 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.145350 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.178677 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.212004 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.245330 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.278681 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.312012 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.345350 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.378669 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.411991 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.445325 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.478655 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.512007 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 p[MCU2_0] 44.545328 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.578666 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.611985 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.645316 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.678659 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.711972 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.745328 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.778655 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 [MCU2_0] 44.811987 s: VX_ZONE_ERROR:[tivxDisplayProcess:1182] DISPLAY: ERROR: Wrong Operation Mode Selected! -16843010 Summary of CPU load, ==================== CPU: mpu1_0: TOTAL LOAD = 0.20 % ( HWI = 0. 1 %, SWI = 0. 1 % ) CPU: mcu2_0: TOTAL LOAD = 31. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: mcu2_1: TOTAL LOAD = 24. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: mcu3_0: TOTAL LOAD = 24. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: mcu3_1: TOTAL LOAD = 24. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: mcu4_0: TOTAL LOAD = 24. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: mcu4_1: TOTAL LOAD = 24. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: c7x_1: TOTAL LOAD = 0. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: c7x_2: TOTAL LOAD = 1. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: c7x_3: TOTAL LOAD = 0. 0 % ( HWI = 0. 0 %, SWI = 0. 0 % ) CPU: c7x_4: TOTAL LOAD = 42949671.96 % ( HWI = 0. 0 %, SWI = 0. 0 % ) HWA performance statistics, =========================== HWA: VISS: LOAD = 9. 4 % ( 60 MP/s ) HWA: MSC0: LOAD = 13.44 % ( 60 MP/s ) DDR performance statistics, =========================== DDR: READ BW: AVG = 399 MB/s, PEAK = 1652 MB/s DDR: WRITE BW: AVG = 392 MB/s, PEAK = 1225 MB/s DDR: TOTAL BW: AVG = 791 MB/s, PEAK = 2877 MB/s Detailed CPU performance/memory statistics, =========================================== 44.822636 s: DDR_SHARED_MEM: Alloc's: 21 alloc's of 46326038 bytes 44.822645 s: DDR_SHARED_MEM: Free's : 0 free's of 0 bytes 44.822653 s: DDR_SHARED_MEM: Open's : 21 allocs of 46326038 bytes CPU: mcu2_0: TASK: FREERTOS_TA: 23.97 % CPU: mcu2_0: TASK: IPC_RX: 0. 1 % CPU: mcu2_0: TASK: REMOTE_SRV: 1.15 % CPU: mcu2_0: TASK: LOAD_TEST: 0. 0 % CPU: mcu2_0: TASK: TIVX_CPU_0: 5.12 % CPU: mcu2_0: TASK: TIVX_V1NF: 0. 0 % CPU: mcu2_0: TASK: TIVX_V1LDC: 0. 0 % CPU: mcu2_0: TASK: TIVX_V1MSC1: 0. 8 % CPU: mcu2_0: TASK: TIVX_V1MSC2: 0. 0 % CPU: mcu2_0: TASK: TIVX_V1VISS: 0.14 % CPU: mcu2_0: TASK: TIVX_CAPT1: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT2: 0. 7 % CPU: mcu2_0: TASK: TIVX_CAPT3: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT4: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT5: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT6: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT7: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT8: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT9: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT10: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT11: 0. 0 % CPU: mcu2_0: TASK: TIVX_CAPT12: 0. 0 % CPU: mcu2_0: TASK: TIVX_DISP1: 0. 3 % CPU: mcu2_0: TASK: TIVX_DISP2: 0. 0 % CPU: mcu2_0: TASK: TIVX_CSITX: 0. 0 % CPU: mcu2_0: TASK: TIVX_CSITX2: 0. 0 % CPU: mcu2_0: TASK: TIVX_DPM2M1: 0. 0 % CPU: mcu2_0: TASK: TIVX_DPM2M2: 0. 0 % CPU: mcu2_0: TASK: TIVX_DPM2M3: 0. 0 % CPU: mcu2_0: TASK: TIVX_DPM2M4: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_RX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % CPU: mcu2_0: TASK: IPC_TEST_TX: 0. 0 % ^C Clean up and exit while handling signal 2 Application did not close some rpmsg_char devices root@j784s4-evm:/opt/vision_apps#