[Fri Jan 03 13:52:55.630 2025] [Fri Jan 03 13:52:55.630 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:52:55.645 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:52:55.708 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:52:55.724 2025] Trying to boot from MMC1 [Fri Jan 03 13:52:55.896 2025] Authentication passed [Fri Jan 03 13:52:55.896 2025] Authentication passed [Fri Jan 03 13:52:55.896 2025] Authentication passed [Fri Jan 03 13:52:55.943 2025] Authentication passed [Fri Jan 03 13:52:55.943 2025] Authentication passed [Fri Jan 03 13:52:55.943 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:52:55.943 2025] [Fri Jan 03 13:52:55.959 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:52:55.959 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:52:56.257 2025] [Fri Jan 03 13:52:56.257 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:52:56.257 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:52:56.304 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:52:56.304 2025] Error: could not access storage. [Fri Jan 03 13:52:56.313 2025] Trying to boot from MMC1 [Fri Jan 03 13:52:56.462 2025] Authentication passed [Fri Jan 03 13:52:56.478 2025] Authentication passed [Fri Jan 03 13:52:57.121 2025] [Fri Jan 03 13:52:57.121 2025] [Fri Jan 03 13:52:57.121 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:52:57.137 2025] [Fri Jan 03 13:52:57.137 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:52:57.137 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:52:57.137 2025] DRAM: 2 GiB [Fri Jan 03 13:52:57.372 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:52:57.372 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:52:57.388 2025] Loading Environment from MMC... OK [Fri Jan 03 13:52:57.594 2025] In: serial [Fri Jan 03 13:52:57.594 2025] Out: serial [Fri Jan 03 13:52:57.594 2025] Err: serial [Fri Jan 03 13:52:57.594 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:52:57.594 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:52:57.768 2025] switch to partitions #0, OK [Fri Jan 03 13:52:57.770 2025] mmc0(part 0) is current device [Fri Jan 03 13:52:57.915 2025] SD/MMC found on device 0 [Fri Jan 03 13:52:57.916 2025] Running eMMC boot ... [Fri Jan 03 13:52:57.934 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 13:52:57.937 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:52:57.943 2025] Importing environment from mmc0 ... [Fri Jan 03 13:52:58.163 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:52:58.184 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:52:58.190 2025] Working FDT set to 88000000 [Fri Jan 03 13:52:58.194 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:52:58.199 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:52:58.205 2025] Working FDT set to 88000000 [Fri Jan 03 13:52:58.226 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:52:58.236 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:52:58.242 2025] Working FDT set to 8feed000 [Fri Jan 03 13:52:58.252 2025] [Fri Jan 03 13:52:58.252 2025] Starting kernel ... [Fri Jan 03 13:52:58.252 2025] [Fri Jan 03 13:52:58.287 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:52:58.294 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:52:58.313 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:52:58.319 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:52:58.407 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:52:58.415 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:52:58.419 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:52:58.426 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:52:58.433 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:52:58.442 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:52:58.453 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:52:58.462 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:52:58.469 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:52:58.477 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:52:58.485 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:52:58.498 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:52:58.505 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:52:58.513 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:52:58.521 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:52:58.528 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:52:58.533 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:52:58.538 2025] [ 0.000000] Normal empty [Fri Jan 03 13:52:58.543 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:52:58.543 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:52:58.548 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:52:58.554 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:52:58.560 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:52:58.566 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:52:58.573 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:52:58.578 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:52:58.585 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:52:58.591 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:52:58.598 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:52:58.605 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:52:58.610 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:52:58.614 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:52:58.619 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:52:58.624 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:52:58.629 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:52:58.635 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:52:58.641 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:52:58.645 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:52:58.651 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:52:58.658 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:52:58.665 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:52:58.670 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:52:58.677 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:52:58.723 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:52:58.732 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:52:58.739 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:52:58.747 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:52:58.754 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:52:58.770 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:52:58.777 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:52:58.784 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:52:58.791 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:52:58.797 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:52:58.804 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:52:58.810 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:52:58.816 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:52:58.823 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:52:58.828 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:52:58.834 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:52:58.839 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:52:58.844 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:52:58.844 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:52:58.851 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:52:58.857 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:52:58.862 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:52:58.872 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:52:58.879 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:52:58.884 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:52:58.890 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:52:58.895 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:52:58.903 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:52:58.909 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:52:58.915 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:52:58.926 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:52:58.934 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 13:52:58.941 2025] [ 0.528870] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:52:58.950 2025] [ 0.528880] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:52:58.956 2025] [ 0.528964] LSM: Security Framework initializing [Fri Jan 03 13:52:58.963 2025] [ 0.529102] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:52:58.970 2025] [ 0.529126] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:52:58.977 2025] [ 0.530808] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:52:58.984 2025] [ 0.530816] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:52:58.989 2025] [ 0.530860] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:52:58.995 2025] [ 0.583317] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:52:59.002 2025] [ 0.583561] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:52:59.009 2025] [ 0.583646] EFI services will not be available. [Fri Jan 03 13:52:59.016 2025] [ 0.583901] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:52:59.024 2025] [ 0.584680] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:52:59.025 2025] [ 0.584793] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:52:59.032 2025] [ 0.584810] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:52:59.039 2025] [ 0.584864] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:52:59.045 2025] [ 0.634957] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:52:59.053 2025] [ 0.635045] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:52:59.058 2025] [ 0.635057] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:52:59.065 2025] [ 0.635088] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:52:59.072 2025] [ 0.660954] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:52:59.078 2025] [ 0.661033] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:52:59.085 2025] [ 0.661047] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:52:59.092 2025] [ 0.661077] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:52:59.098 2025] [ 0.661132] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:52:59.103 2025] [ 0.661138] SMP: Total of 4 processors activated. [Fri Jan 03 13:52:59.108 2025] [ 0.695322] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:52:59.114 2025] [ 0.695326] CPU features: detected: CRC32 instructions [Fri Jan 03 13:52:59.122 2025] [ 0.695372] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:52:59.126 2025] [ 0.695374] alternatives: applying system-wide alternatives [Fri Jan 03 13:52:59.131 2025] [ 0.696836] devtmpfs: initialized [Fri Jan 03 13:52:59.131 2025] [ 0.708425] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:52:59.138 2025] [ 0.708451] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:52:59.145 2025] [ 0.713577] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:52:59.152 2025] [ 0.714385] DMI not present or invalid. [Fri Jan 03 13:52:59.159 2025] [ 0.714901] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:52:59.164 2025] [ 0.729120] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:52:59.172 2025] [ 0.729488] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:52:59.178 2025] [ 0.729713] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:52:59.186 2025] [ 0.729845] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:52:59.192 2025] [ 0.730032] audit: type=2000 audit(0.728:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:52:59.198 2025] [ 0.730666] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:52:59.205 2025] [ 0.730670] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:52:59.212 2025] [ 0.730914] ASID allocator initialised with 65536 entries [Fri Jan 03 13:52:59.219 2025] [ 0.745823] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:52:59.225 2025] [ 0.754945] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:52:59.233 2025] [ 0.754955] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:52:59.239 2025] [ 0.754960] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:52:59.245 2025] [ 0.754963] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:52:59.251 2025] [ 0.754966] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:52:59.262 2025] [ 0.754969] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:52:59.266 2025] [ 0.754973] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:52:59.273 2025] [ 0.754976] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:52:59.280 2025] [ 0.756087] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:52:59.286 2025] [ 0.756552] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:52:59.294 2025] [ 0.756559] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:52:59.301 2025] [ 0.756571] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:52:59.309 2025] [ 0.756588] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:52:59.317 2025] [ 0.756599] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.324 2025] [ 0.756604] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:52:59.331 2025] [ 0.756846] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:52:59.340 2025] [ 0.756852] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:52:59.346 2025] [ 0.756865] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:52:59.355 2025] [ 0.756878] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:52:59.364 2025] [ 0.756886] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.371 2025] [ 0.756891] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:52:59.387 2025] [ 0.757143] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:52:59.395 2025] [ 0.757148] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:52:59.404 2025] [ 0.757157] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:52:59.411 2025] [ 0.757170] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:52:59.417 2025] [ 0.757178] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.422 2025] [ 0.757182] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:52:59.429 2025] [ 0.757384] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:52:59.435 2025] [ [ 1.021706] printk: console [ttyS2] printing thread started [Fri Jan 03 13:52:59.440 2025] 0.757389] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:52:59.449 2025] [ 1.021726] printk: console [ttyS2] enabled [Fri Jan 03 13:52:59.449 2025] [ 1.021731] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:52:59.457 2025] [ 1.034486] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:52:59.462 2025] [ 1.035653] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:52:59.469 2025] [ 1.035663] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:52:59.476 2025] [ 1.035676] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:52:59.486 2025] [ 1.035694] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:52:59.493 2025] [ 1.035706] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.502 2025] [ 1.035712] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:52:59.508 2025] [ 1.035741] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:52:59.515 2025] [ 1.036663] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:52:59.521 2025] [ 1.036672] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:52:59.527 2025] [ 1.036685] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:52:59.536 2025] [ 1.036700] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:52:59.544 2025] [ 1.036710] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.552 2025] [ 1.036714] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:52:59.558 2025] [ 1.039734] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:52:59.566 2025] [ 1.046530] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:52:59.572 2025] [ 1.053090] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:52:59.579 2025] [ 1.053508] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:52:59.585 2025] [ 1.053513] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:52:59.592 2025] [ 1.053531] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:52:59.598 2025] [ 1.053548] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:52:59.613 2025] [ 1.053561] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.618 2025] [ 1.053566] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:52:59.618 2025] [ 1.087012] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:52:59.629 2025] [ 1.087297] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:52:59.629 2025] [ 1.088110] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:52:59.645 2025] [ 1.088117] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:52:59.645 2025] [ 1.088130] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:52:59.661 2025] [ 1.088154] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:52:59.676 2025] [ 1.088172] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.676 2025] [ 1.088176] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:52:59.692 2025] [ 1.088936] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:52:59.692 2025] [ 1.088999] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:52:59.708 2025] [ 1.089261] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:52:59.708 2025] [ 1.089273] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:52:59.724 2025] [ 1.089278] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:52:59.724 2025] [ 1.090072] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:52:59.724 2025] [ 1.106518] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:52:59.739 2025] [ 1.111307] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:52:59.755 2025] [ 1.111544] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:52:59.755 2025] [ 1.111554] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:52:59.771 2025] [ 1.111577] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:52:59.771 2025] [ 1.111598] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:52:59.771 2025] [ 1.111603] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:52:59.786 2025] [ 1.111601] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:52:59.786 2025] [ 1.111613] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.802 2025] [ 1.111617] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:52:59.802 2025] [ 1.111616] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:52:59.819 2025] [ 1.111635] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:52:59.819 2025] [ 1.111649] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.834 2025] [ 1.111653] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:52:59.834 2025] [ 1.111658] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:52:59.849 2025] [ 1.111661] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:52:59.849 2025] [ 1.111669] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:52:59.865 2025] [ 1.111681] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:52:59.865 2025] [ 1.111690] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.880 2025] [ 1.111693] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:52:59.880 2025] [ 1.112909] mmc0: CQHCI version 5.10 [Fri Jan 03 13:52:59.880 2025] [ 1.112909] mmc1: CQHCI version 5.10 [Fri Jan 03 13:52:59.880 2025] [ 1.113532] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:52:59.896 2025] [ 1.113546] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:52:59.896 2025] [ 1.113559] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:52:59.912 2025] [ 1.113582] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:52:59.928 2025] [ 1.113599] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:52:59.928 2025] [ 1.113613] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:52:59.928 2025] [ 1.114524] mmc2: CQHCI version 5.10 [Fri Jan 03 13:52:59.943 2025] [ 1.116427] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:52:59.943 2025] [ 1.118866] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:52:59.959 2025] [ 1.121897] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:52:59.959 2025] [ 1.122109] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:52:59.975 2025] [ 1.122178] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:52:59.975 2025] [ 1.125281] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:52:59.990 2025] [ 1.125493] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:53:00.006 2025] [ 1.125556] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:53:00.019 2025] [ 1.127162] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:53:00.022 2025] [ 1.127171] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:53:00.022 2025] [ 1.127192] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:53:00.038 2025] [ 1.127209] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:53:00.038 2025] [ 1.127224] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:53:00.053 2025] [ 1.127228] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:53:00.053 2025] [ 1.127237] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:53:00.069 2025] [ 1.127247] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:53:00.069 2025] [ 1.127257] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:53:00.085 2025] [ 1.127261] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:53:00.085 2025] [ 1.127713] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:53:00.085 2025] [ 1.127718] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:53:00.100 2025] [ 1.127736] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:53:00.116 2025] [ 1.127747] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:53:00.120 2025] [ 1.127751] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:53:00.120 2025] [ 1.128313] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:53:00.132 2025] [ 1.128329] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:53:00.132 2025] [ 1.128332] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:53:00.148 2025] [ 1.128428] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:53:00.148 2025] [ 1.128440] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:53:00.148 2025] [ 1.128443] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:53:00.163 2025] [ 1.128508] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:53:00.163 2025] [ 1.128519] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:00.179 2025] [ 1.128525] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:53:00.179 2025] [ 1.129180] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:53:00.194 2025] [ 1.132006] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:53:00.194 2025] [ 1.144594] ALSA device list: [Fri Jan 03 13:53:00.210 2025] [ 1.144610] No soundcards found. [Fri Jan 03 13:53:00.210 2025] [ 1.147141] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:00.210 2025] [ 1.154604] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:00.220 2025] [ 1.163626] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:00.226 2025] [ 1.163787] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:53:00.226 2025] [ 1.209663] mmc1: new MMC card at address 0001 [Fri Jan 03 13:53:00.242 2025] [ 1.210475] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:53:00.242 2025] [ 1.218461] mmcblk1: p1 [Fri Jan 03 13:53:00.242 2025] [ 1.219289] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:53:00.258 2025] [ 1.220937] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:53:00.258 2025] [ 1.222321] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:53:00.258 2025] [ 1.302826] mmc0: Command Queue Engine enabled [Fri Jan 03 13:53:00.274 2025] [ 1.302844] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:53:00.274 2025] [ 1.303597] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:53:00.289 2025] [ 1.307640] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:53:00.289 2025] [ 1.308740] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:53:00.289 2025] [ 1.310119] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:53:00.289 2025] [ 1.311270] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:53:00.305 2025] [ 1.331370] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:53:00.305 2025] [ 1.331749] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:00.320 2025] [ 1.331829] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:53:00.320 2025] [ 1.332008] devtmpfs: mounted [Fri Jan 03 13:53:00.320 2025] [ 1.333407] Freeing unused kernel memory: 1856K [Fri Jan 03 13:53:00.320 2025] [ 1.338095] Run /sbin/init as init process [Fri Jan 03 13:53:00.336 2025] [ 1.338098] with arguments: [Fri Jan 03 13:53:00.336 2025] [ 1.338100] /sbin/init [Fri Jan 03 13:53:00.352 2025] [ 1.338102] with environment: [Fri Jan 03 13:53:00.352 2025] [ 1.338103] HOME=/ [Fri Jan 03 13:53:00.352 2025] [ 1.338105] TERM=linux [Fri Jan 03 13:53:00.352 2025] [ 1.338107] syntec_extend= [Fri Jan 03 13:53:00.352 2025] [ 1.429421] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:53:00.352 2025] [ 1.467934] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:53:00.352 2025] [ 1.469147] Segment Routing with IPv6 [Fri Jan 03 13:53:00.367 2025] [ 1.469180] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:53:00.367 2025] [ 1.499261] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:53:00.404 2025] [ 1.499811] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:53:00.404 2025] [ 1.503143] systemd[1]: Hostname set to . [Fri Jan 03 13:53:00.414 2025] [ 1.613119] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:53:00.446 2025] [ 1.915650] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:53:00.446 2025] [ 1.918439] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:53:00.462 2025] [ 1.981047] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:53:00.477 2025] [ 1.984351] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:53:00.477 2025] [ 1.985855] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:53:00.477 2025] [ 1.986351] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:53:00.493 2025] [ 1.986695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:53:00.493 2025] [ 1.986903] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:53:00.509 2025] [ 1.987274] systemd[1]: Reached target Path Units. [Fri Jan 03 13:53:00.509 2025] [ 1.987365] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:53:00.521 2025] [ 1.987435] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:53:00.525 2025] [ 1.987533] systemd[1]: Reached target Swaps. [Fri Jan 03 13:53:00.525 2025] [ 1.991765] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:53:00.525 2025] [ 1.991933] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:53:00.540 2025] [ 1.998011] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:53:00.540 2025] [ 1.998480] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:53:00.556 2025] [ 1.999359] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:53:00.556 2025] [ 1.999969] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:53:00.556 2025] [ 2.000652] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:53:00.572 2025] [ 2.001466] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:53:00.572 2025] [ 2.003362] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:53:00.587 2025] [ 2.003865] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:53:00.587 2025] [ 2.004445] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:53:00.603 2025] [ 2.067678] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:53:00.603 2025] [ 2.071680] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:53:00.618 2025] [ 2.076015] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:53:00.621 2025] [ 2.076802] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:53:00.634 2025] [ 2.078343] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:53:00.634 2025] [ 2.082333] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:53:00.634 2025] [ 2.089535] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:53:00.653 2025] [ 2.094871] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:53:00.653 2025] [ 2.100219] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:53:00.668 2025] [ 2.105119] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:53:00.668 2025] [ 2.111561] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:53:00.668 2025] [ 2.112147] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:53:00.682 2025] [ 2.113603] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:53:00.698 2025] [ 2.113634] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:53:00.698 2025] [ 2.117131] systemd[1]: Starting Journal Service... [Fri Jan 03 13:53:00.715 2025] [ 2.121683] fuse: init (API version 7.37) [Fri Jan 03 13:53:00.721 2025] [ 2.125619] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:53:00.730 2025] [ 2.130620] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:53:00.732 2025] [ 2.136451] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:53:00.732 2025] [ 2.141855] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:53:00.746 2025] [ 2.149776] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:53:00.746 2025] [ 2.163171] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:53:00.761 2025] [ 2.167508] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:53:00.761 2025] [ 2.179907] systemd[1]: Started RPC Bind. [Fri Jan 03 13:53:00.761 2025] [ 2.181086] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:53:00.761 2025] [ 2.182052] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:53:00.777 2025] [ 2.182748] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:53:00.777 2025] [ 2.184682] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:53:00.792 2025] [ 2.194404] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:53:00.792 2025] [ 2.204281] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:53:00.792 2025] [ 2.209615] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:53:00.808 2025] [ 2.211500] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:53:00.808 2025] [ 2.215314] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:53:00.821 2025] [ 2.215934] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:53:00.824 2025] [ 2.217433] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:53:00.824 2025] [ 2.218115] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:53:00.840 2025] [ 2.219414] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:53:00.840 2025] [ 2.220578] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:53:00.840 2025] [ 2.221744] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:53:00.855 2025] [ 2.222977] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:53:00.855 2025] [ 2.246759] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:53:00.855 2025] [ 2.250832] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:53:00.871 2025] [ 2.253802] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:53:00.887 2025] [ 2.254330] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:53:00.902 2025] [ 2.258792] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:53:00.902 2025] [ 2.260021] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:53:00.902 2025] [ 2.268293] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:53:00.921 2025] [ 2.282613] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:53:00.921 2025] [ 2.293638] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:53:00.934 2025] [ 2.319780] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:53:00.934 2025] [ 2.339884] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 13:53:00.934 2025] [ 2.340743] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 13:53:00.950 2025] [ 2.345575] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 13:53:00.950 2025] [ 2.351551] systemd[1]: Started Journal Service. [Fri Jan 03 13:53:00.965 2025] [ 2.395721] systemd-journald[190]: Received client request to flush runtime journal. [Fri Jan 03 13:53:01.158 2025] [ 2.752311] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:53:01.172 2025] [ 2.752328] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:53:01.179 2025] [ 2.752342] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:53:01.211 2025] [ 2.752375] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:53:01.221 2025] [ 2.752393] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:53:01.234 2025] [ 2.765811] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:53:01.234 2025] [ 2.765834] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:01.242 2025] [ 2.765867] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:01.253 2025] [ 2.765907] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:53:01.272 2025] [ 2.765920] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:53:01.285 2025] [ 2.765924] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:01.306 2025] [ 2.765936] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:01.330 2025] [ 2.765949] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:53:01.338 2025] [ 2.765957] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:53:01.349 2025] [ 2.765960] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:01.349 2025] [ 2.765973] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:01.381 2025] [ 2.770090] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:53:01.394 2025] [ 2.786962] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:53:01.403 2025] [ 2.787109] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:53:01.409 2025] [ 2.787147] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:53:01.413 2025] [ 2.787149] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:53:01.441 2025] [ 2.787181] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:01.461 2025] [ 2.835181] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:53:01.472 2025] [ 2.836261] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:23:18 UTC (1681064598) [Fri Jan 03 13:53:01.477 2025] [ 2.843611] mc: Linux media interface: v0.10 [Fri Jan 03 13:53:01.488 2025] [ 2.845521] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:53:01.509 2025] [ 2.845551] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:53:01.531 2025] [ 2.852629] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:53:01.536 2025] [ 2.987334] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:53:01.541 2025] [ 2.987765] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:53:01.552 2025] [ 2.987849] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:53:01.568 2025] [ 2.988332] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:53:01.574 2025] [ 2.989261] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:53:01.594 2025] [ 2.989298] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:53:01.606 2025] [ 2.989336] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:53:01.610 2025] [ 2.989344] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:53:01.620 2025] [ 3.122934] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:53:01.634 2025] [ 3.127958] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:53:01.644 2025] [ 3.128233] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:53:01.654 2025] [ 3.169186] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:53:01.656 2025] [ 3.169281] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:53:01.664 2025] [ 3.174292] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:53:01.669 2025] [ 3.174326] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:53:01.676 2025] [ 3.174331] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:53:01.682 2025] [ 3.174354] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:53:01.694 2025] [ 3.174379] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:53:01.703 2025] [ 3.174396] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:01.715 2025] [ 3.174402] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:53:01.718 2025] [ 3.179008] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:53:01.726 2025] [ 3.179045] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:53:01.737 2025] [ 3.179807] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:53:01.744 2025] [ 3.179843] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 13:53:01.778 2025] [ 3.179850] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:53:01.823 2025] [ 3.180857] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:53:01.829 2025] [ 3.181150] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:53:01.836 2025] [ 3.195393] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:53:01.849 2025] [ 3.231353] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:53:01.852 2025] [ 3.232112] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:53:01.866 2025] [ 3.232145] Get kick_gpio number= (418) [Fri Jan 03 13:53:02.194 2025] [ 3.785049] random: crng init done [Fri Jan 03 13:53:02.624 2025] [ 4.214825] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:53:02.635 2025] [ 4.214846] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:53:02.668 2025] [ 4.214862] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:53:02.677 2025] [ 4.214896] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:53:02.711 2025] [ 4.214912] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:53:02.727 2025] [ 4.214919] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:53:02.736 2025] [ 4.237885] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:53:02.755 2025] [ 4.285957] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:53:02.766 2025] [ 4.296081] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:53:02.896 2025] [ 4.486628] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:53:02.947 2025] [ 4.538446] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:53:02.954 2025] [ 4.538502] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:53:02.968 2025] [ 4.538720] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:53:02.977 2025] [ 4.538731] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:53:02.994 2025] [ 4.554935] xhci-hcd xhci-hcd.4.auto: irq 471, io mem 0x31100000 [Fri Jan 03 13:53:03.005 2025] [ 4.583514] hub 1-0:1.0: USB hub found [Fri Jan 03 13:53:03.007 2025] [ 4.586937] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:53:03.238 2025] [ 4.830142] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:53:03.412 2025] [ 5.003816] hub 1-1:1.0: USB hub found [Fri Jan 03 13:53:03.417 2025] [ 5.003982] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:53:03.645 2025] [ 5.237920] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:53:03.660 2025] [ 5.255069] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:53:03.676 2025] [ 5.256102] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:53:03.676 2025] [ 5.256129] cfg80211: failed to load regulatory.db [Fri Jan 03 13:53:03.692 2025] [ 5.292437] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:53:03.708 2025] [ 5.292479] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:03.708 2025] [ 5.305273] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:53:03.723 2025] [ 5.305370] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:03.755 2025] [ 5.347474] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:53:03.755 2025] [ 5.347510] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:03.802 2025] [ 5.401389] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:53:03.818 2025] [ 5.401420] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:53:03.912 2025] [ 5.506946] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:53:03.960 2025] [ 5.559398] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:53:03.960 2025] [ 5.559782] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:04.164 2025] [ 5.758899] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:53:04.164 2025] [ 5.762075] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:04.370 2025] [ 5.961089] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:53:04.401 2025] [ 6.005701] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:53:04.417 2025] [ 6.005741] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:53:04.607 2025] *************************************************************** [Fri Jan 03 13:53:04.622 2025] *************************************************************** [Fri Jan 03 13:53:04.622 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:53:04.637 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:53:04.637 2025] bash [Fri Jan 03 13:53:04.637 2025] cifs-utils [Fri Jan 03 13:53:04.637 2025] dosfstools [Fri Jan 03 13:53:04.637 2025] grub-common [Fri Jan 03 13:53:04.637 2025] grub-editenv [Fri Jan 03 13:53:04.637 2025] grub-efi [Fri Jan 03 13:53:04.637 2025] less [Fri Jan 03 13:53:04.637 2025] lib32-libgcc1 [Fri Jan 03 13:53:04.637 2025] lib32-libstdc++6 [Fri Jan 03 13:53:04.653 2025] libdw1 [Fri Jan 03 13:53:04.653 2025] libelf1 [Fri Jan 03 13:53:04.653 2025] libgcc1 [Fri Jan 03 13:53:04.653 2025] libgdbm-compat4 [Fri Jan 03 13:53:04.653 2025] libgdbm6 [Fri Jan 03 13:53:04.653 2025] libgmp10 [Fri Jan 03 13:53:04.653 2025] libidn2-0 [Fri Jan 03 13:53:04.653 2025] libreadline8 [Fri Jan 03 13:53:04.653 2025] libstdc++6 [Fri Jan 03 13:53:04.653 2025] libunistring2 [Fri Jan 03 13:53:04.653 2025] libvte-2.91-0 [Fri Jan 03 13:53:04.653 2025] nettle [Fri Jan 03 13:53:04.669 2025] onboard [Fri Jan 03 13:53:04.669 2025] parted [Fri Jan 03 13:53:04.669 2025] rxvt-unicode [Fri Jan 03 13:53:04.669 2025] [Fri Jan 03 13:53:04.669 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:53:04.677 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:53:04.677 2025] the opkg remove command. i.e.: [Fri Jan 03 13:53:04.685 2025] opkg remove [Fri Jan 03 13:53:04.685 2025] Where is the name printed in the list above [Fri Jan 03 13:53:04.685 2025] [Fri Jan 03 13:53:04.685 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:53:04.685 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:53:04.700 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:53:04.700 2025] also remove the dependent packages as well [Fri Jan 03 13:53:04.700 2025] *************************************************************** [Fri Jan 03 13:53:04.716 2025] *************************************************************** [Fri Jan 03 13:53:10.382 2025] [Fri Jan 03 13:53:10.382 2025] _____ _____ _ _ [Fri Jan 03 13:53:10.388 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:53:10.394 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:53:10.400 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:53:10.405 2025] |___| |___| [Fri Jan 03 13:53:10.412 2025] [Fri Jan 03 13:53:10.412 2025] Arago Project am62xx-evm - [Fri Jan 03 13:53:10.412 2025] [Fri Jan 03 13:53:10.412 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:53:10.417 2025] [Fri Jan 03 13:53:10.417 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:53:10.643 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:53:10.825 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:53:10.832 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:53:11.004 2025] [ 12.595469] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:53:11.010 2025] [ 12.595493] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:53:11.017 2025] [ 12.595514] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.026 2025] [ 12.595581] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:53:11.032 2025] [ 12.595587] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:53:11.043 2025] [ 12.595594] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.047 2025] [ 12.595636] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:11.057 2025] [ 12.595641] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:53:11.066 2025] [ 12.595652] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.073 2025] [ 12.595687] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:53:11.073 2025] [ 12.595693] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:53:11.083 2025] [ 12.595700] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.093 2025] [ 12.595737] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:53:11.093 2025] [ 12.595742] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:53:11.103 2025] [ 12.595749] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.114 2025] [ 12.595784] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:53:11.115 2025] [ 12.595789] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:53:11.125 2025] [ 12.595798] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.126 2025] [ 12.595831] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:11.131 2025] [ 12.595836] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:53:11.132 2025] [ 12.595843] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:11.140 2025] [ 12.595881] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:53:11.151 2025] [ 12.595886] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:53:11.159 2025] [ 12.595894] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.284 2025] [ 14.873711] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:53:13.289 2025] [ 14.873733] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:53:13.298 2025] [ 14.873750] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.310 2025] [ 14.873798] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:53:13.311 2025] [ 14.873803] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:53:13.327 2025] [ 14.873809] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.328 2025] [ 14.873848] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:13.335 2025] [ 14.873853] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:53:13.343 2025] [ 14.873860] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.349 2025] [ 14.873892] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:53:13.349 2025] [ 14.873898] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:53:13.355 2025] [ 14.873905] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.362 2025] [ 14.873942] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:53:13.369 2025] [ 14.873947] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:53:13.374 2025] [ 14.873953] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.380 2025] [ 14.874223] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:53:13.386 2025] [ 14.874230] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:53:13.391 2025] [ 14.874240] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.396 2025] [ 14.874293] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:13.401 2025] [ 14.874299] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:53:13.408 2025] [ 14.874306] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.416 2025] [ 14.874340] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:53:13.421 2025] [ 14.874345] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:53:13.426 2025] [ 14.874354] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:13.770 2025] [ 15.369157] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:53:17.082 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:53:17.082 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:53:18.929 2025] [ 20.516907] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:53:18.933 2025] [ 20.516931] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:53:18.939 2025] [ 20.516952] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:18.945 2025] [ 20.520476] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:53:18.951 2025] [ 20.520496] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:53:18.957 2025] [ 20.520511] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:18.967 2025] [ 20.520583] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:18.973 2025] [ 20.520588] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:53:18.975 2025] [ 20.520597] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:18.981 2025] [ 20.520636] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:53:18.987 2025] [ 20.520642] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:53:18.994 2025] [ 20.520649] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.000 2025] [ 20.520686] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:53:19.007 2025] [ 20.520691] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:53:19.014 2025] [ 20.520699] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.022 2025] [ 20.520733] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:53:19.026 2025] [ 20.520738] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:53:19.033 2025] [ 20.520748] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.039 2025] [ 20.520786] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:19.045 2025] [ 20.520791] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:53:19.051 2025] [ 20.520799] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.056 2025] [ 20.520838] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:53:19.063 2025] [ 20.520843] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:53:19.069 2025] [ 20.520850] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.075 2025] [ 20.596072] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:53:19.081 2025] [ 20.596102] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:53:19.087 2025] [ 20.596122] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.093 2025] [ 20.596187] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:53:19.099 2025] [ 20.596192] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:53:19.105 2025] [ 20.596200] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.111 2025] [ 20.596240] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:19.117 2025] [ 20.596245] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:53:19.122 2025] [ 20.596252] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.130 2025] [ 20.596287] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:53:19.136 2025] [ 20.596292] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:53:19.143 2025] [ 20.596302] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.149 2025] [ 20.596337] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:53:19.155 2025] [ 20.596342] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:53:19.162 2025] [ 20.596349] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.168 2025] [ 20.596385] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:53:19.174 2025] [ 20.596389] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:53:19.180 2025] [ 20.596399] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.185 2025] [ 20.596433] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:19.191 2025] [ 20.596439] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:53:19.197 2025] [ 20.596447] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:19.203 2025] [ 20.596481] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:53:19.210 2025] [ 20.596485] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:53:19.216 2025] [ 20.596492] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:53:50.587 2025] [Fri Jan 03 13:53:50.587 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:53:50.607 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:53:50.656 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:53:50.678 2025] Trying to boot from MMC1 [Fri Jan 03 13:53:50.852 2025] Authentication passed [Fri Jan 03 13:53:50.858 2025] Authentication passed [Fri Jan 03 13:53:50.865 2025] Authentication passed [Fri Jan 03 13:53:50.900 2025] Authentication passed [Fri Jan 03 13:53:50.908 2025] Authentication passed [Fri Jan 03 13:53:50.911 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:53:50.916 2025] [Fri Jan 03 13:53:50.916 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:53:50.923 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:53:51.215 2025] [Fri Jan 03 13:53:51.216 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:53:51.223 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:53:51.261 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:53:51.265 2025] Error: could not access storage. [Fri Jan 03 13:53:51.271 2025] Trying to boot from MMC1 [Fri Jan 03 13:53:51.425 2025] Authentication passed [Fri Jan 03 13:53:51.431 2025] Authentication passed [Fri Jan 03 13:53:52.077 2025] [Fri Jan 03 13:53:52.077 2025] [Fri Jan 03 13:53:52.078 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:53:52.084 2025] [Fri Jan 03 13:53:52.084 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:53:52.088 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:53:52.094 2025] DRAM: 2 GiB [Fri Jan 03 13:53:52.327 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:53:52.334 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:53:52.346 2025] Loading Environment from MMC... OK [Fri Jan 03 13:53:52.547 2025] In: serial [Fri Jan 03 13:53:52.553 2025] Out: serial [Fri Jan 03 13:53:52.553 2025] Err: serial [Fri Jan 03 13:53:52.558 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:53:52.558 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:53:52.715 2025] switch to partitions #0, OK [Fri Jan 03 13:53:52.719 2025] mmc0(part 0) is current device [Fri Jan 03 13:53:52.866 2025] SD/MMC found on device 0 [Fri Jan 03 13:53:52.870 2025] Running eMMC boot ... [Fri Jan 03 13:53:52.883 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 13:53:52.887 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:53:52.892 2025] Importing environment from mmc0 ... [Fri Jan 03 13:53:53.113 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:53:53.135 2025] 62962 bytes read in 17 ms (3.5 MiB/s) [Fri Jan 03 13:53:53.139 2025] Working FDT set to 88000000 [Fri Jan 03 13:53:53.145 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:53:53.150 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:53:53.155 2025] Working FDT set to 88000000 [Fri Jan 03 13:53:53.175 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:53:53.182 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:53:53.193 2025] Working FDT set to 8feed000 [Fri Jan 03 13:53:53.201 2025] [Fri Jan 03 13:53:53.201 2025] Starting kernel ... [Fri Jan 03 13:53:53.209 2025] [Fri Jan 03 13:53:53.237 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:53:53.250 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:53:53.269 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:53:53.276 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:53:53.359 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:53:53.367 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:53:53.379 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:53:53.395 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:53:53.401 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:53:53.402 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:53:53.407 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:53:53.415 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:53:53.423 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:53:53.430 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:53:53.437 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:53:53.446 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:53:53.454 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:53:53.463 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:53:53.471 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:53:53.476 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:53:53.483 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:53:53.483 2025] [ 0.000000] Normal empty [Fri Jan 03 13:53:53.489 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:53:53.496 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:53:53.501 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:53:53.507 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:53:53.512 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:53:53.518 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:53:53.523 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:53:53.529 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:53:53.536 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:53:53.541 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:53:53.548 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:53:53.554 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:53:53.559 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:53:53.564 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:53:53.569 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:53:53.574 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:53:53.579 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:53:53.587 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:53:53.591 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:53:53.598 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:53:53.605 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:53:53.610 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:53:53.617 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:53:53.623 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:53:53.629 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:53:53.672 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:53:53.682 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:53:53.689 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:53:53.698 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:53:53.706 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:53:53.721 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:53:53.730 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:53:53.736 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:53:53.741 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:53:53.746 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:53:53.753 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:53:53.760 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:53:53.766 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:53:53.772 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:53:53.777 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:53:53.783 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:53:53.789 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:53:53.794 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:53:53.794 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:53:53.800 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:53:53.805 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:53:53.812 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:53:53.819 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:53:53.826 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:53:53.832 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:53:53.839 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:53:53.845 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:53:53.852 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:53:53.859 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:53:53.865 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:53:53.875 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:53:53.884 2025] [ 0.000245] Console: colour dummy device 80x25 [Fri Jan 03 13:53:53.890 2025] [ 0.528878] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:53:53.902 2025] [ 0.528889] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:53:53.909 2025] [ 0.528973] LSM: Security Framework initializing [Fri Jan 03 13:53:53.916 2025] [ 0.529108] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:53:53.921 2025] [ 0.529133] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:53:53.930 2025] [ 0.530816] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:53:53.937 2025] [ 0.530823] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:53:53.943 2025] [ 0.530868] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:53:53.948 2025] [ 0.583325] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:53:53.954 2025] [ 0.583554] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:53:53.961 2025] [ 0.583639] EFI services will not be available. [Fri Jan 03 13:53:53.967 2025] [ 0.583889] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:53:53.972 2025] [ 0.584656] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:53:53.977 2025] [ 0.584762] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:53:53.984 2025] [ 0.584780] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:53:53.991 2025] [ 0.584836] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:53:54.001 2025] [ 0.634923] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:53:54.001 2025] [ 0.635009] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:53:54.008 2025] [ 0.635022] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:53:54.015 2025] [ 0.635051] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:53:54.023 2025] [ 0.660934] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:53:54.029 2025] [ 0.661016] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:53:54.034 2025] [ 0.661028] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:53:54.040 2025] [ 0.661058] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:53:54.047 2025] [ 0.661117] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:53:54.053 2025] [ 0.661123] SMP: Total of 4 processors activated. [Fri Jan 03 13:53:54.059 2025] [ 0.661126] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:53:54.064 2025] [ 0.700554] CPU features: detected: CRC32 instructions [Fri Jan 03 13:53:54.070 2025] [ 0.700600] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:53:54.075 2025] [ 0.700602] alternatives: applying system-wide alternatives [Fri Jan 03 13:53:54.081 2025] [ 0.702083] devtmpfs: initialized [Fri Jan 03 13:53:54.086 2025] [ 0.713667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:53:54.092 2025] [ 0.713695] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:53:54.098 2025] [ 0.718826] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:53:54.104 2025] [ 0.719650] DMI not present or invalid. [Fri Jan 03 13:53:54.105 2025] [ 0.720176] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:53:54.111 2025] [ 0.734219] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:53:54.119 2025] [ 0.734508] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:53:54.126 2025] [ 0.734702] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:53:54.134 2025] [ 0.734843] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:53:54.141 2025] [ 0.735036] audit: type=2000 audit(0.732:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:53:54.149 2025] [ 0.735675] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:53:54.156 2025] [ 0.735680] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:53:54.164 2025] [ 0.735923] ASID allocator initialised with 65536 entries [Fri Jan 03 13:53:54.169 2025] [ 0.750801] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:53:54.175 2025] [ 0.759944] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:53:54.182 2025] [ 0.759955] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:53:54.187 2025] [ 0.759959] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:53:54.194 2025] [ 0.759962] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:53:54.203 2025] [ 0.759966] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:53:54.209 2025] [ 0.759968] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:53:54.215 2025] [ 0.759972] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:53:54.221 2025] [ 0.759975] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:53:54.228 2025] [ 0.761113] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:53:54.235 2025] [ 0.761614] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:53:54.242 2025] [ 0.761622] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:53:54.249 2025] [ 0.761635] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:53:54.258 2025] [ 0.761649] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:53:54.266 2025] [ 0.761660] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.276 2025] [ 0.761665] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:53:54.283 2025] [ 0.761889] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:53:54.288 2025] [ 0.761894] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:53:54.296 2025] [ 0.761903] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:53:54.303 2025] [ 0.761915] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:53:54.323 2025] [ 0.761924] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.329 2025] [ 0.761928] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:53:54.337 2025] [ 0.762183] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:53:54.345 2025] [ 0.762187] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:53:54.351 2025] [ 0.762201] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:53:54.358 2025] [ 0.762213] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:53:54.363 2025] [ 0.762222] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.369 2025] [ 0.762225] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:53:54.375 2025] [ [ 1.013515] printk: console [ttyS2] printing thread started [Fri Jan 03 13:53:54.384 2025] 0.762439] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:53:54.389 2025] [ 1.013535] printk: console [ttyS2] enabled [Fri Jan 03 13:53:54.396 2025] [ 1.013540] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:53:54.401 2025] [ 1.026119] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:53:54.406 2025] [ 1.027403] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:53:54.413 2025] [ 1.027413] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:53:54.420 2025] [ 1.027426] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:53:54.427 2025] [ 1.027445] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:53:54.435 2025] [ 1.027457] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.442 2025] [ 1.027462] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:53:54.451 2025] [ 1.027492] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:53:54.458 2025] [ 1.028461] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:53:54.464 2025] [ 1.028469] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:53:54.471 2025] [ 1.028481] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:53:54.482 2025] [ 1.028497] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:53:54.486 2025] [ 1.028506] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.494 2025] [ 1.028511] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:53:54.504 2025] [ 1.031471] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:53:54.508 2025] [ 1.038559] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:53:54.515 2025] [ 1.045260] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:53:54.521 2025] [ 1.045683] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:53:54.528 2025] [ 1.045689] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:53:54.534 2025] [ 1.045707] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:53:54.544 2025] [ 1.045724] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:53:54.558 2025] [ 1.045737] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.563 2025] [ 1.045742] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:53:54.570 2025] [ 1.079018] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:53:54.577 2025] [ 1.079311] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:53:54.582 2025] [ 1.080108] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:53:54.589 2025] [ 1.080115] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:53:54.595 2025] [ 1.080130] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:53:54.608 2025] [ 1.080154] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:53:54.621 2025] [ 1.080169] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.627 2025] [ 1.080174] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:53:54.633 2025] [ 1.080920] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:53:54.641 2025] [ 1.080967] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:53:54.654 2025] [ 1.081263] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:53:54.664 2025] [ 1.081281] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:53:54.673 2025] [ 1.081286] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:53:54.680 2025] [ 1.082069] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:53:54.689 2025] [ 1.098572] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:53:54.696 2025] [ 1.103299] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:53:54.701 2025] [ 1.103318] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:53:54.706 2025] [ 1.103327] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:53:54.711 2025] [ 1.103332] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:53:54.717 2025] [ 1.103334] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:53:54.725 2025] [ 1.103341] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:53:54.731 2025] [ 1.103357] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:53:54.742 2025] [ 1.103357] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:53:54.752 2025] [ 1.103369] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.760 2025] [ 1.103369] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.767 2025] [ 1.103374] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:53:54.774 2025] [ 1.103376] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:53:54.784 2025] [ 1.103382] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:53:54.793 2025] [ 1.103386] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:53:54.802 2025] [ 1.103394] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:53:54.815 2025] [ 1.103411] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:53:54.829 2025] [ 1.103419] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.830 2025] [ 1.103422] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:53:54.837 2025] [ 1.104094] mmc1: CQHCI version 5.10 [Fri Jan 03 13:53:54.837 2025] [ 1.104871] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:53:54.838 2025] [ 1.104885] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:53:54.845 2025] [ 1.104902] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:53:54.858 2025] [ 1.104926] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:53:54.861 2025] [ 1.104940] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:54.867 2025] [ 1.104944] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:53:54.873 2025] [ 1.104953] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:53:54.880 2025] [ 1.105344] mmc0: CQHCI version 5.10 [Fri Jan 03 13:53:54.891 2025] [ 1.105668] mmc2: CQHCI version 5.10 [Fri Jan 03 13:53:54.891 2025] [ 1.108062] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:53:54.906 2025] [ 1.110383] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:53:54.914 2025] [ 1.113371] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:53:54.921 2025] [ 1.113569] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:53:54.938 2025] [ 1.113635] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:53:54.953 2025] [ 1.117027] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:53:54.953 2025] [ 1.117280] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:53:54.961 2025] [ 1.117345] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:53:54.962 2025] [ 1.118940] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:53:54.968 2025] [ 1.118948] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:53:54.973 2025] [ 1.118970] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:53:54.981 2025] [ 1.118996] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:53:54.987 2025] [ 1.119008] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:53:54.995 2025] [ 1.119012] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:53:55.000 2025] [ 1.119023] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:53:55.008 2025] [ 1.119034] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:53:55.015 2025] [ 1.119044] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:53:55.022 2025] [ 1.119048] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:53:55.029 2025] [ 1.119480] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:53:55.036 2025] [ 1.119485] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:53:55.043 2025] [ 1.119496] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:53:55.050 2025] [ 1.119507] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:53:55.058 2025] [ 1.119512] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:53:55.065 2025] [ 1.120024] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:53:55.073 2025] [ 1.120041] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:53:55.080 2025] [ 1.120045] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:53:55.086 2025] [ 1.120141] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:53:55.094 2025] [ 1.120152] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:53:55.101 2025] [ 1.120156] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:53:55.106 2025] [ 1.120215] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:53:55.115 2025] [ 1.120225] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:53:55.120 2025] [ 1.120229] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:53:55.125 2025] [ 1.120826] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:53:55.132 2025] [ 1.123469] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:53:55.139 2025] [ 1.136185] ALSA device list: [Fri Jan 03 13:53:55.139 2025] [ 1.136203] No soundcards found. [Fri Jan 03 13:53:55.146 2025] [ 1.140901] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:55.154 2025] [ 1.145853] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:55.161 2025] [ 1.155718] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:53:55.168 2025] [ 1.155891] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:53:55.175 2025] [ 1.201812] mmc1: new MMC card at address 0001 [Fri Jan 03 13:53:55.181 2025] [ 1.202631] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:53:55.187 2025] [ 1.210653] mmcblk1: p1 [Fri Jan 03 13:53:55.192 2025] [ 1.211431] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:53:55.192 2025] [ 1.213059] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:53:55.198 2025] [ 1.214407] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:53:55.206 2025] [ 1.294824] mmc0: Command Queue Engine enabled [Fri Jan 03 13:53:55.207 2025] [ 1.294841] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:53:55.213 2025] [ 1.295563] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:53:55.218 2025] [ 1.299552] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:53:55.224 2025] [ 1.300653] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:53:55.229 2025] [ 1.302053] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:53:55.236 2025] [ 1.303323] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:53:55.241 2025] [ 1.325257] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:53:55.246 2025] [ 1.325637] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:55.252 2025] [ 1.325720] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:53:55.258 2025] [ 1.325874] devtmpfs: mounted [Fri Jan 03 13:53:55.264 2025] [ 1.327281] Freeing unused kernel memory: 1856K [Fri Jan 03 13:53:55.270 2025] [ 1.330083] Run /sbin/init as init process [Fri Jan 03 13:53:55.270 2025] [ 1.330087] with arguments: [Fri Jan 03 13:53:55.275 2025] [ 1.330089] /sbin/init [Fri Jan 03 13:53:55.275 2025] [ 1.330091] with environment: [Fri Jan 03 13:53:55.281 2025] [ 1.330092] HOME=/ [Fri Jan 03 13:53:55.281 2025] [ 1.330094] TERM=linux [Fri Jan 03 13:53:55.288 2025] [ 1.330096] syntec_extend= [Fri Jan 03 13:53:55.288 2025] [ 1.420992] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:53:55.295 2025] [ 1.444495] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:53:55.300 2025] [ 1.445702] Segment Routing with IPv6 [Fri Jan 03 13:53:55.304 2025] [ 1.445732] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:53:55.304 2025] [ 1.462740] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:53:55.342 2025] [ 1.463347] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:53:55.352 2025] [ 1.466555] systemd[1]: Hostname set to . [Fri Jan 03 13:53:55.352 2025] [ 1.586399] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:53:55.375 2025] [ 1.890715] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:53:55.386 2025] [ 1.893540] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:53:55.408 2025] [ 1.956613] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:53:55.414 2025] [ 1.959854] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:53:55.419 2025] [ 1.961451] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:53:55.425 2025] [ 1.961967] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:53:55.431 2025] [ 1.962342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:53:55.438 2025] [ 1.962541] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:53:55.446 2025] [ 1.962910] systemd[1]: Reached target Path Units. [Fri Jan 03 13:53:55.455 2025] [ 1.963019] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:53:55.457 2025] [ 1.963083] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:53:55.462 2025] [ 1.963169] systemd[1]: Reached target Swaps. [Fri Jan 03 13:53:55.469 2025] [ 1.967367] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:53:55.476 2025] [ 1.967542] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:53:55.480 2025] [ 1.973580] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:53:55.494 2025] [ 1.974069] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:53:55.501 2025] [ 1.974929] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:53:55.507 2025] [ 1.975585] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:53:55.514 2025] [ 1.976183] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:53:55.520 2025] [ 1.976927] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:53:55.533 2025] [ 1.978800] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:53:55.537 2025] [ 1.979375] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:53:55.543 2025] [ 1.979895] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:53:55.552 2025] [ 2.025678] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:53:55.559 2025] [ 2.029779] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:53:55.564 2025] [ 2.034274] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:53:55.571 2025] [ 2.035120] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:53:55.581 2025] [ 2.036893] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:53:55.589 2025] [ 2.040958] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:53:55.596 2025] [ 2.046690] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:53:55.603 2025] [ 2.051614] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:53:55.614 2025] [ 2.057593] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:53:55.614 2025] [ 2.067357] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:53:55.614 2025] [ 2.073402] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:53:55.625 2025] [ 2.073894] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:53:55.630 2025] [ 2.075252] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:53:55.646 2025] [ 2.075275] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:53:55.657 2025] [ 2.079184] systemd[1]: Starting Journal Service... [Fri Jan 03 13:53:55.662 2025] [ 2.079911] fuse: init (API version 7.37) [Fri Jan 03 13:53:55.667 2025] [ 2.087082] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:53:55.667 2025] [ 2.092341] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:53:55.678 2025] [ 2.097931] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:53:55.678 2025] [ 2.106382] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:53:55.694 2025] [ 2.110279] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:53:55.700 2025] [ 2.112660] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:53:55.700 2025] [ 2.115834] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:53:55.709 2025] [ 2.130680] systemd[1]: Started RPC Bind. [Fri Jan 03 13:53:55.710 2025] [ 2.132323] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:53:55.710 2025] [ 2.133556] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:53:55.721 2025] [ 2.134724] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:53:55.725 2025] [ 2.135640] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:53:55.731 2025] [ 2.137416] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:53:55.741 2025] [ 2.139110] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:53:55.742 2025] [ 2.139848] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:53:55.753 2025] [ 2.141468] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:53:55.757 2025] [ 2.142269] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:53:55.764 2025] [ 2.144350] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:53:55.764 2025] [ 2.145238] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:53:55.774 2025] [ 2.146952] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:53:55.785 2025] [ 2.171109] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:53:55.796 2025] [ 2.173340] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:53:55.796 2025] [ 2.177477] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:53:55.796 2025] [ 2.185885] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:53:55.806 2025] [ 2.202774] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:53:55.809 2025] [ 2.207062] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:53:55.821 2025] [ 2.208432] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:53:55.828 2025] [ 2.209271] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:53:55.828 2025] [ 2.209905] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:53:55.838 2025] [ 2.211977] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:53:55.860 2025] [ 2.212322] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:53:55.884 2025] [ 2.212662] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:53:55.900 2025] [ 2.216849] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:53:55.902 2025] [ 2.226596] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:53:55.916 2025] [ 2.271497] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 13:53:55.916 2025] [ 2.272183] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 13:53:55.924 2025] [ 2.303183] systemd[1]: Mounting /media/ram... [Fri Jan 03 13:53:55.934 2025] [ 2.309163] systemd[1]: Mounting /var/volatile... [Fri Jan 03 13:53:55.934 2025] [ 2.314600] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 13:53:55.945 2025] [ 2.321121] systemd[1]: Started Journal Service. [Fri Jan 03 13:53:55.947 2025] [ 2.367874] systemd-journald[190]: Received client request to flush runtime journal. [Fri Jan 03 13:53:55.999 2025] [ 2.645046] random: crng init done [Fri Jan 03 13:53:56.180 2025] [ 2.819334] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:53:56.186 2025] [ 2.819354] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:53:56.190 2025] [ 2.819367] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:53:56.222 2025] [ 2.819406] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:53:56.233 2025] [ 2.819427] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:53:56.297 2025] [ 2.821407] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:53:56.318 2025] [ 2.821425] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:56.340 2025] [ 2.821456] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:56.350 2025] [ 2.821482] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:53:56.372 2025] [ 2.821494] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:53:56.393 2025] [ 2.821498] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:56.404 2025] [ 2.821513] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:56.425 2025] [ 2.821525] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:53:56.436 2025] [ 2.821532] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:53:56.446 2025] [ 2.821536] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:53:56.467 2025] [ 2.821546] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:53:56.489 2025] [ 2.821557] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:53:56.504 2025] [ 2.823699] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:53:56.509 2025] [ 2.823716] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:53:56.520 2025] [ 2.823754] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:53:56.520 2025] [ 2.823757] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:53:56.536 2025] [ 2.823781] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:53:56.536 2025] [ 2.898349] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:53:56.552 2025] [ 2.899474] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:24:13 UTC (1681064653) [Fri Jan 03 13:53:56.552 2025] [ 2.900324] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:53:56.567 2025] [ 2.900350] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:53:56.583 2025] [ 2.903894] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:53:56.609 2025] [ 2.903919] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:53:56.630 2025] [ 2.938865] mc: Linux media interface: v0.10 [Fri Jan 03 13:53:56.630 2025] [ 2.966310] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:53:56.646 2025] [ 3.063880] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:53:56.646 2025] [ 3.064088] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:53:56.662 2025] [ 3.064172] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:53:56.662 2025] [ 3.064490] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:53:56.677 2025] [ 3.067339] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:53:56.677 2025] [ 3.067387] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:53:56.693 2025] [ 3.067430] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:53:56.709 2025] [ 3.067438] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:53:56.724 2025] [ 3.118687] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:53:56.740 2025] [ 3.118722] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:53:56.740 2025] [ 3.118733] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:53:56.756 2025] [ 3.118756] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:53:56.771 2025] [ 3.118785] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:53:56.810 2025] [ 3.118806] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:53:56.819 2025] [ 3.118812] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:53:56.819 2025] [ 3.228114] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:53:56.834 2025] [ 3.273191] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:53:56.850 2025] [ 3.273424] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:53:56.850 2025] [ 3.273588] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:53:56.865 2025] [ 3.273951] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:53:56.865 2025] [ 3.276983] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:53:56.881 2025] [ 3.344313] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:53:56.881 2025] [ 3.344355] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:53:56.897 2025] [ 3.348155] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:53:56.897 2025] [ 3.348210] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:53:56.910 2025] [ 3.348218] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:53:56.913 2025] [ 3.348497] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:53:56.913 2025] [ 3.348692] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:53:56.928 2025] [ 3.370370] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:53:56.928 2025] [ 3.370969] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:53:56.944 2025] [ 3.371079] Get kick_gpio number= (418) [Fri Jan 03 13:53:57.117 2025] [ 3.764272] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:53:57.149 2025] [ 3.764297] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:53:57.164 2025] [ 3.764327] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:53:57.164 2025] [ 3.764361] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:53:57.196 2025] [ 3.764379] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:53:57.196 2025] [ 3.764389] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:53:57.212 2025] [ 3.792584] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:53:57.212 2025] [ 3.839687] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:53:57.228 2025] [ 3.842714] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:53:57.354 2025] [ 3.996072] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:53:57.448 2025] [ 4.100794] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:53:57.463 2025] [ 4.100847] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:53:57.463 2025] [ 4.115147] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:53:57.479 2025] [ 4.115170] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:53:57.495 2025] [ 4.128097] xhci-hcd xhci-hcd.4.auto: irq 468, io mem 0x31100000 [Fri Jan 03 13:53:57.510 2025] [ 4.138063] hub 1-0:1.0: USB hub found [Fri Jan 03 13:53:57.511 2025] [ 4.138554] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:53:57.742 2025] [ 4.381121] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:53:57.945 2025] [ 4.576856] hub 1-1:1.0: USB hub found [Fri Jan 03 13:53:57.945 2025] [ 4.579451] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:53:58.241 2025] [ 4.882578] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:53:58.282 2025] [ 4.923395] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:53:58.296 2025] [ 4.924232] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:53:58.309 2025] [ 4.924264] cfg80211: failed to load regulatory.db [Fri Jan 03 13:53:58.410 2025] [ 5.051209] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:53:58.426 2025] [ 5.051246] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:53:58.760 2025] [ 5.400476] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:53:58.769 2025] [ 5.400519] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:58.786 2025] [ 5.427853] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:53:58.792 2025] [ 5.427895] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:58.816 2025] [ 5.455248] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:53:58.820 2025] [ 5.455285] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:58.832 2025] [ 5.471311] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:53:58.895 2025] [ 5.536573] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:53:58.905 2025] [ 5.537147] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:59.092 2025] [ 5.733600] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:53:59.138 2025] [ 5.780164] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:53:59.149 2025] [ 5.780204] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:53:59.287 2025] [ 5.928405] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:53:59.295 2025] [ 5.931871] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:53:59.554 2025] *************************************************************** [Fri Jan 03 13:53:59.560 2025] *************************************************************** [Fri Jan 03 13:53:59.567 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:53:59.573 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:53:59.577 2025] bash [Fri Jan 03 13:53:59.582 2025] cifs-utils [Fri Jan 03 13:53:59.582 2025] dosfstools [Fri Jan 03 13:53:59.582 2025] grub-common [Fri Jan 03 13:53:59.582 2025] grub-editenv [Fri Jan 03 13:53:59.587 2025] grub-efi [Fri Jan 03 13:53:59.587 2025] less [Fri Jan 03 13:53:59.587 2025] lib32-libgcc1 [Fri Jan 03 13:53:59.587 2025] lib32-libstdc++6 [Fri Jan 03 13:53:59.591 2025] libdw1 [Fri Jan 03 13:53:59.591 2025] libelf1 [Fri Jan 03 13:53:59.591 2025] libgcc1 [Fri Jan 03 13:53:59.592 2025] libgdbm-compat4 [Fri Jan 03 13:53:59.592 2025] libgdbm6 [Fri Jan 03 13:53:59.596 2025] libgmp10 [Fri Jan 03 13:53:59.596 2025] libidn2-0 [Fri Jan 03 13:53:59.596 2025] libreadline8 [Fri Jan 03 13:53:59.596 2025] libstdc++6 [Fri Jan 03 13:53:59.596 2025] libunistring2 [Fri Jan 03 13:53:59.598 2025] libvte-2.91-0 [Fri Jan 03 13:53:59.598 2025] nettle [Fri Jan 03 13:53:59.598 2025] onboard [Fri Jan 03 13:53:59.598 2025] parted [Fri Jan 03 13:53:59.598 2025] rxvt-unicode [Fri Jan 03 13:53:59.598 2025] [Fri Jan 03 13:53:59.598 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:53:59.598 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:53:59.614 2025] the opkg remove command. i.e.: [Fri Jan 03 13:53:59.614 2025] opkg remove [Fri Jan 03 13:53:59.614 2025] Where is the name printed in the list above [Fri Jan 03 13:53:59.614 2025] [Fri Jan 03 13:53:59.614 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:53:59.630 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:53:59.630 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:53:59.630 2025] also remove the dependent packages as well [Fri Jan 03 13:53:59.645 2025] *************************************************************** [Fri Jan 03 13:53:59.645 2025] *************************************************************** [Fri Jan 03 13:54:05.016 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:54:05.016 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:54:05.125 2025] [Fri Jan 03 13:54:05.125 2025] _____ _____ _ _ [Fri Jan 03 13:54:05.132 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:54:05.134 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:54:05.142 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:54:05.142 2025] |___| |___| [Fri Jan 03 13:54:05.142 2025] [Fri Jan 03 13:54:05.142 2025] Arago Project am62xx-evm - [Fri Jan 03 13:54:05.157 2025] [Fri Jan 03 13:54:05.157 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:54:05.157 2025] [Fri Jan 03 13:54:05.157 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:54:05.220 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:54:05.393 2025] [ 12.043802] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:54:05.409 2025] [ 12.043825] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:54:05.409 2025] [ 12.043845] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.409 2025] [ 12.043909] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:54:05.425 2025] [ 12.043915] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:54:05.434 2025] [ 12.043922] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.434 2025] [ 12.043962] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:54:05.441 2025] [ 12.043968] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:54:05.441 2025] [ 12.043975] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.456 2025] [ 12.044125] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:54:05.456 2025] [ 12.044133] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:54:05.472 2025] [ 12.044141] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.472 2025] [ 12.044180] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:54:05.472 2025] [ 12.044185] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:54:05.488 2025] [ 12.044192] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.488 2025] [ 12.044227] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:54:05.503 2025] [ 12.044232] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:54:05.503 2025] [ 12.044241] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.519 2025] [ 12.044282] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:54:05.519 2025] [ 12.044287] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:54:05.519 2025] [ 12.044294] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:05.534 2025] [ 12.044328] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:54:05.534 2025] [ 12.044334] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:54:05.534 2025] [ 12.044342] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.678 2025] [ 14.319815] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:54:07.685 2025] [ 14.319837] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:54:07.692 2025] [ 14.319855] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.698 2025] [ 14.319907] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:54:07.704 2025] [ 14.319912] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:54:07.710 2025] [ 14.319919] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.716 2025] [ 14.319952] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:54:07.722 2025] [ 14.319959] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:54:07.729 2025] [ 14.319965] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.735 2025] [ 14.320074] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:54:07.741 2025] [ 14.320079] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:54:07.747 2025] [ 14.320087] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.753 2025] [ 14.320127] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:54:07.759 2025] [ 14.320132] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:54:07.767 2025] [ 14.320139] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.773 2025] [ 14.320173] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:54:07.779 2025] [ 14.320178] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:54:07.785 2025] [ 14.320185] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.791 2025] [ 14.320218] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:54:07.797 2025] [ 14.320223] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:54:07.804 2025] [ 14.320230] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:07.809 2025] [ 14.320264] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:54:07.817 2025] [ 14.320269] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:54:07.822 2025] [ 14.320276] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:08.173 2025] [ 14.811282] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:54:11.444 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:54:11.444 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:54:13.221 2025] [ 19.875262] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:54:13.237 2025] [ 19.875286] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:54:13.249 2025] [ 19.875305] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.253 2025] [ 19.875364] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:54:13.253 2025] [ 19.875370] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:54:13.253 2025] [ 19.875377] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.268 2025] [ 19.875415] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:54:13.268 2025] [ 19.875420] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:54:13.284 2025] [ 19.875429] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.284 2025] [ 19.875463] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:54:13.300 2025] [ 19.875469] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:54:13.300 2025] [ 19.875475] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.300 2025] [ 19.875512] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:54:13.315 2025] [ 19.875517] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:54:13.315 2025] [ 19.875524] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.315 2025] [ 19.875562] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:54:13.331 2025] [ 19.875567] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:54:13.331 2025] [ 19.875575] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.346 2025] [ 19.875608] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:54:13.349 2025] [ 19.875613] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:54:13.349 2025] [ 19.875620] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.363 2025] [ 19.875656] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:54:13.363 2025] [ 19.875661] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:54:13.363 2025] [ 19.875668] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.378 2025] [ 19.951190] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:54:13.378 2025] [ 19.951222] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:54:13.394 2025] [ 19.951244] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.394 2025] [ 19.951311] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:54:13.394 2025] [ 19.951317] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:54:13.409 2025] [ 19.951328] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.409 2025] [ 19.951373] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:54:13.425 2025] [ 19.951378] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:54:13.425 2025] [ 19.951386] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.441 2025] [ 19.951423] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:54:13.441 2025] [ 19.951431] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:54:13.450 2025] [ 19.951438] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.457 2025] [ 19.951472] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:54:13.457 2025] [ 19.951478] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:54:13.457 2025] [ 19.951486] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.472 2025] [ 19.951520] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:54:13.472 2025] [ 19.951526] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:54:13.488 2025] [ 19.951533] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.488 2025] [ 19.951567] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:54:13.488 2025] [ 19.951575] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:54:13.504 2025] [ 19.951582] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:13.504 2025] [ 19.951616] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:54:13.519 2025] [ 19.951622] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:54:13.519 2025] [ 19.951628] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:54:45.882 2025] [Fri Jan 03 13:54:45.882 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:54:45.902 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:54:45.951 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:54:45.972 2025] Trying to boot from MMC1 [Fri Jan 03 13:54:46.145 2025] Authentication passed [Fri Jan 03 13:54:46.151 2025] Authentication passed [Fri Jan 03 13:54:46.156 2025] Authentication passed [Fri Jan 03 13:54:46.192 2025] Authentication passed [Fri Jan 03 13:54:46.197 2025] Authentication passed [Fri Jan 03 13:54:46.204 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:54:46.206 2025] [Fri Jan 03 13:54:46.210 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:54:46.214 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:54:46.512 2025] [Fri Jan 03 13:54:46.512 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:54:46.519 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:54:46.559 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:54:46.563 2025] Error: could not access storage. [Fri Jan 03 13:54:46.568 2025] Trying to boot from MMC1 [Fri Jan 03 13:54:46.724 2025] Authentication passed [Fri Jan 03 13:54:46.730 2025] Authentication passed [Fri Jan 03 13:54:47.383 2025] [Fri Jan 03 13:54:47.384 2025] [Fri Jan 03 13:54:47.384 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:54:47.391 2025] [Fri Jan 03 13:54:47.391 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:54:47.391 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:54:47.396 2025] DRAM: 2 GiB [Fri Jan 03 13:54:47.630 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:54:47.630 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:54:47.645 2025] Loading Environment from MMC... OK [Fri Jan 03 13:54:47.850 2025] In: serial [Fri Jan 03 13:54:47.850 2025] Out: serial [Fri Jan 03 13:54:47.850 2025] Err: serial [Fri Jan 03 13:54:47.850 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:54:47.865 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:54:48.009 2025] switch to partitions #0, OK [Fri Jan 03 13:54:48.024 2025] mmc0(part 0) is current device [Fri Jan 03 13:54:48.166 2025] SD/MMC found on device 0 [Fri Jan 03 13:54:48.166 2025] Running eMMC boot ... [Fri Jan 03 13:54:48.182 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 13:54:48.182 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:54:48.197 2025] Importing environment from mmc0 ... [Fri Jan 03 13:54:48.418 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:54:48.433 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:54:48.449 2025] Working FDT set to 88000000 [Fri Jan 03 13:54:48.449 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:54:48.449 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:54:48.449 2025] Working FDT set to 88000000 [Fri Jan 03 13:54:48.481 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:54:48.481 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:54:48.496 2025] Working FDT set to 8feed000 [Fri Jan 03 13:54:48.496 2025] [Fri Jan 03 13:54:48.496 2025] Starting kernel ... [Fri Jan 03 13:54:48.512 2025] [Fri Jan 03 13:54:48.543 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:54:48.543 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:54:48.567 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:54:48.575 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:54:48.667 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:54:48.669 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:54:48.669 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:54:48.669 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:54:48.685 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:54:48.701 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:54:48.701 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:54:48.716 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:54:48.716 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:54:48.732 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:54:48.732 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:54:48.748 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:54:48.748 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:54:48.767 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:54:48.767 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:54:48.779 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:54:48.779 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:54:48.779 2025] [ 0.000000] Normal empty [Fri Jan 03 13:54:48.795 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:54:48.795 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:54:48.795 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:54:48.795 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:54:48.811 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:54:48.811 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:54:48.826 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:54:48.826 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:54:48.826 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:54:48.842 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:54:48.842 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:54:48.858 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:54:48.858 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:54:48.868 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:54:48.874 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:54:48.874 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:54:48.874 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:54:48.889 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:54:48.889 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:54:48.889 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:54:48.905 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:54:48.905 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:54:48.920 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:54:48.920 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:54:48.920 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:54:48.968 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:54:48.983 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:54:48.983 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:54:48.999 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:54:48.999 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:54:49.015 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:54:49.030 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:54:49.030 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:54:49.046 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:54:49.046 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:54:49.061 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:54:49.068 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:54:49.068 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:54:49.078 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:54:49.078 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:54:49.078 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:54:49.093 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:54:49.093 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:54:49.093 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:54:49.109 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:54:49.109 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:54:49.109 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:54:49.124 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:54:49.124 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:54:49.140 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:54:49.140 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:54:49.140 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:54:49.156 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:54:49.156 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:54:49.172 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:54:49.172 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:54:49.187 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 13:54:49.187 2025] [ 0.528871] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:54:49.203 2025] [ 0.528882] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:54:49.203 2025] [ 0.528966] LSM: Security Framework initializing [Fri Jan 03 13:54:49.219 2025] [ 0.529101] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:54:49.219 2025] [ 0.529126] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:54:49.219 2025] [ 0.530817] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:54:49.234 2025] [ 0.530824] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:54:49.234 2025] [ 0.530867] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:54:49.250 2025] [ 0.583332] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:54:49.250 2025] [ 0.583576] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:54:49.269 2025] [ 0.583660] EFI services will not be available. [Fri Jan 03 13:54:49.269 2025] [ 0.583917] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:54:49.269 2025] [ 0.584686] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:54:49.282 2025] [ 0.584798] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:54:49.282 2025] [ 0.584815] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:54:49.282 2025] [ 0.584871] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:54:49.297 2025] [ 0.634960] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:54:49.297 2025] [ 0.635045] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:54:49.313 2025] [ 0.635057] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:54:49.313 2025] [ 0.635089] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:54:49.329 2025] [ 0.660970] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:54:49.329 2025] [ 0.661049] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:54:49.329 2025] [ 0.661062] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:54:49.344 2025] [ 0.661094] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:54:49.344 2025] [ 0.661151] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:54:49.344 2025] [ 0.661156] SMP: Total of 4 processors activated. [Fri Jan 03 13:54:49.360 2025] [ 0.695346] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:54:49.369 2025] [ 0.695350] CPU features: detected: CRC32 instructions [Fri Jan 03 13:54:49.376 2025] [ 0.695399] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:54:49.376 2025] [ 0.695401] alternatives: applying system-wide alternatives [Fri Jan 03 13:54:49.376 2025] [ 0.696929] devtmpfs: initialized [Fri Jan 03 13:54:49.376 2025] [ 0.708569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:54:49.392 2025] [ 0.708596] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:54:49.392 2025] [ 0.713731] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:54:49.407 2025] [ 0.714554] DMI not present or invalid. [Fri Jan 03 13:54:49.407 2025] [ 0.715091] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:54:49.407 2025] [ 0.729133] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:54:49.423 2025] [ 0.729418] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:54:49.423 2025] [ 0.729611] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:54:49.438 2025] [ 0.729752] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:54:49.438 2025] [ 0.729943] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:54:49.454 2025] [ 0.730576] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:54:49.454 2025] [ 0.730581] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:54:49.454 2025] [ 0.730819] ASID allocator initialised with 65536 entries [Fri Jan 03 13:54:49.470 2025] [ 0.745736] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:54:49.470 2025] [ 0.754920] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:54:49.486 2025] [ 0.754930] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:54:49.486 2025] [ 0.754934] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:54:49.501 2025] [ 0.754937] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:54:49.501 2025] [ 0.754941] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:54:49.501 2025] [ 0.754943] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:54:49.517 2025] [ 0.754947] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:54:49.517 2025] [ 0.754950] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:54:49.533 2025] [ 0.756100] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:54:49.533 2025] [ 0.756608] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:54:49.548 2025] [ 0.756616] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:54:49.548 2025] [ 0.756629] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:54:49.564 2025] [ 0.756644] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:54:49.569 2025] [ 0.756655] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.580 2025] [ 0.756661] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:54:49.580 2025] [ 0.756883] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:54:49.596 2025] [ 0.756888] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:54:49.596 2025] [ 0.756897] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:54:49.616 2025] [ 0.756910] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:54:49.620 2025] [ 0.756918] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.627 2025] [ 0.756922] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:54:49.634 2025] [ 0.757180] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:54:49.641 2025] [ 0.757184] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:54:49.653 2025] [ 0.757194] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:54:49.657 2025] [ 0.757206] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:54:49.666 2025] [ 0.757214] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.674 2025] [ 0.757218] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:54:49.680 2025] [ 0.757433] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:54:49.687 2025] [ 0.757438] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:54:49.694 2025] [ 0.757451] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 13:54:49.703 2025] [ 0.757464] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 13:54:49.712 2025] [ 1.045[253] printk: console [ttyS2] printing thread started [Fri Jan 03 13:54:49.722 2025] 0.757472] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.729 2025] [ 1.045270] printk: console [ttyS2] enabled [Fri Jan 03 13:54:49.731 2025] [ 1.045274] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:54:49.737 2025] [ 1.058250] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:54:49.742 2025] [ 1.059459] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:54:49.749 2025] [ 1.059468] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:54:49.755 2025] [ 1.059481] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:54:49.765 2025] [ 1.059499] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:54:49.774 2025] [ 1.059511] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.782 2025] [ 1.059516] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:54:49.792 2025] [ 1.059545] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:54:49.796 2025] [ 1.060500] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:54:49.804 2025] [ 1.060509] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:54:49.810 2025] [ 1.060520] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:54:49.818 2025] [ 1.060534] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:54:49.826 2025] [ 1.060545] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.834 2025] [ 1.060549] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:54:49.843 2025] [ 1.063676] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:54:49.848 2025] [ 1.070557] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:54:49.855 2025] [ 1.077168] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:54:49.861 2025] [ 1.077627] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:54:49.867 2025] [ 1.077633] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:54:49.874 2025] [ 1.077647] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:54:49.885 2025] [ 1.077663] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:54:49.896 2025] [ 1.077679] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.903 2025] [ 1.077684] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:54:49.908 2025] [ 1.111042] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:54:49.916 2025] [ 1.111335] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:54:49.922 2025] [ 1.112119] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:54:49.933 2025] [ 1.112127] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:54:49.936 2025] [ 1.112139] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:54:49.947 2025] [ 1.112165] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:54:49.961 2025] [ 1.112179] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:54:49.967 2025] [ 1.112184] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:54:49.974 2025] [ 1.112947] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:54:49.981 2025] [ 1.112995] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:54:49.993 2025] [ 1.113260] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:54:50.000 2025] [ 1.113273] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:54:50.007 2025] [ 1.113278] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:54:50.013 2025] [ 1.114065] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:54:50.022 2025] [ 1.130532] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:54:50.028 2025] [ 1.135485] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:54:50.034 2025] [ 1.135493] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:54:50.043 2025] [ 1.135502] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:54:50.050 2025] [ 1.135515] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:54:50.062 2025] [ 1.135537] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:54:50.068 2025] [ 1.135548] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:54:50.077 2025] [ 1.135556] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:54:50.087 2025] [ 1.136299] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:54:50.088 2025] [ 1.136311] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:54:50.095 2025] [ 1.136326] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:54:50.104 2025] [ 1.136395] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:54:50.113 2025] [ 1.136407] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:54:50.124 2025] [ 1.136411] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:54:50.130 2025] [ 1.136417] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:54:50.134 2025] [ 1.136422] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:54:50.140 2025] [ 1.136431] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:54:50.150 2025] [ 1.136443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:54:50.159 2025] [ 1.136452] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:54:50.167 2025] [ 1.136456] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:54:50.172 2025] [ 1.136529] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:54:50.178 2025] [ 1.136535] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:54:50.184 2025] [ 1.136575] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:54:50.193 2025] [ 1.136589] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:54:50.202 2025] [ 1.136598] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:54:50.213 2025] [ 1.136601] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:54:50.219 2025] [ 1.137219] mmc2: CQHCI version 5.10 [Fri Jan 03 13:54:50.221 2025] [ 1.137220] mmc1: CQHCI version 5.10 [Fri Jan 03 13:54:50.226 2025] [ 1.138002] mmc0: CQHCI version 5.10 [Fri Jan 03 13:54:50.230 2025] [ 1.138790] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:54:50.237 2025] [ 1.141268] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:54:50.245 2025] [ 1.144397] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:54:50.251 2025] [ 1.144608] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:54:50.257 2025] [ 1.144675] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:54:50.263 2025] [ 1.147794] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:54:50.269 2025] [ 1.148002] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:54:50.277 2025] [ 1.148086] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:54:50.282 2025] [ 1.149773] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:54:50.288 2025] [ 1.149783] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:54:50.296 2025] [ 1.149804] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:54:50.308 2025] [ 1.149821] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:54:50.311 2025] [ 1.149838] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:54:50.322 2025] [ 1.149842] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:54:50.324 2025] [ 1.149851] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:54:50.333 2025] [ 1.149863] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:54:50.342 2025] [ 1.149872] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:54:50.350 2025] [ 1.149877] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:54:50.356 2025] [ 1.150336] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:54:50.363 2025] [ 1.150344] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:54:50.369 2025] [ 1.150358] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:54:50.378 2025] [ 1.150369] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:54:50.385 2025] [ 1.150374] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:54:50.391 2025] [ 1.150866] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:54:50.402 2025] [ 1.150878] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:54:50.405 2025] [ 1.150882] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:54:50.411 2025] [ 1.150976] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:54:50.419 2025] [ 1.150989] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:54:50.425 2025] [ 1.150993] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:54:50.430 2025] [ 1.151116] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:54:50.439 2025] [ 1.151128] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:54:50.445 2025] [ 1.151131] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:54:50.451 2025] [ 1.151776] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:54:50.459 2025] [ 1.154601] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:54:50.466 2025] [ 1.167043] ALSA device list: [Fri Jan 03 13:54:50.471 2025] [ 1.167055] No soundcards found. [Fri Jan 03 13:54:50.471 2025] [ 1.175028] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:54:50.482 2025] [ 1.179145] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:54:50.486 2025] [ 1.184671] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:54:50.497 2025] [ 1.184827] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:54:50.501 2025] [ 1.228696] mmc1: new MMC card at address 0001 [Fri Jan 03 13:54:50.507 2025] [ 1.229566] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:54:50.512 2025] [ 1.238155] mmcblk1: p1 [Fri Jan 03 13:54:50.518 2025] [ 1.238953] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:54:50.523 2025] [ 1.240850] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:54:50.528 2025] [ 1.242325] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:54:50.533 2025] [ 1.326875] mmc0: Command Queue Engine enabled [Fri Jan 03 13:54:50.538 2025] [ 1.326893] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:54:50.542 2025] [ 1.327686] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:54:50.547 2025] [ 1.331737] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:54:50.552 2025] [ 1.332868] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:54:50.557 2025] [ 1.334187] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:54:50.562 2025] [ 1.335296] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:54:50.567 2025] [ 1.353226] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:54:50.572 2025] [ 1.353610] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:50.578 2025] [ 1.353693] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:54:50.584 2025] [ 1.353849] devtmpfs: mounted [Fri Jan 03 13:54:50.589 2025] [ 1.355275] Freeing unused kernel memory: 1856K [Fri Jan 03 13:54:50.594 2025] [ 1.355392] Run /sbin/init as init process [Fri Jan 03 13:54:50.599 2025] [ 1.355395] with arguments: [Fri Jan 03 13:54:50.604 2025] [ 1.355397] /sbin/init [Fri Jan 03 13:54:50.605 2025] [ 1.355399] with environment: [Fri Jan 03 13:54:50.609 2025] [ 1.355400] HOME=/ [Fri Jan 03 13:54:50.610 2025] [ 1.355402] TERM=linux [Fri Jan 03 13:54:50.614 2025] [ 1.355404] syntec_extend= [Fri Jan 03 13:54:50.614 2025] [ 1.446218] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:54:50.620 2025] [ 1.473989] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:54:50.626 2025] [ 1.475239] Segment Routing with IPv6 [Fri Jan 03 13:54:50.630 2025] [ 1.475272] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:54:50.635 2025] [ 1.516758] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:54:50.663 2025] [ 1.517330] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:54:50.669 2025] [ 1.520576] systemd[1]: Hostname set to . [Fri Jan 03 13:54:50.674 2025] [ 1.633511] systemd-sysv-generator[184]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:54:50.696 2025] [ 1.937867] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:54:50.714 2025] [ 1.940699] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:54:50.732 2025] [ 2.003634] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:54:50.740 2025] [ 2.007079] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:54:50.746 2025] [ 2.008651] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:54:50.753 2025] [ 2.009149] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:54:50.759 2025] [ 2.009501] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:54:50.765 2025] [ 2.009702] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:54:50.771 2025] [ 2.010100] systemd[1]: Reached target Path Units. [Fri Jan 03 13:54:50.777 2025] [ 2.010193] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:54:50.782 2025] [ 2.010275] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:54:50.788 2025] [ 2.010361] systemd[1]: Reached target Swaps. [Fri Jan 03 13:54:50.795 2025] [ 2.014618] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:54:50.802 2025] [ 2.014794] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:54:50.807 2025] [ 2.021004] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:54:50.813 2025] [ 2.021484] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:54:50.820 2025] [ 2.022286] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:54:50.825 2025] [ 2.022827] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:54:50.831 2025] [ 2.023391] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:54:50.836 2025] [ 2.024179] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:54:50.842 2025] [ 2.026006] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:54:50.847 2025] [ 2.026506] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:54:50.857 2025] [ 2.026955] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:54:50.865 2025] [ 2.078679] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:54:50.874 2025] [ 2.082770] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:54:50.883 2025] [ 2.087192] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:54:50.893 2025] [ 2.088099] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:54:50.907 2025] [ 2.089312] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:54:50.912 2025] [ 2.093363] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:54:50.923 2025] [ 2.099238] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:54:50.935 2025] [ 2.104428] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:54:50.936 2025] [ 2.111689] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:54:50.942 2025] [ 2.116898] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:54:50.948 2025] [ 2.124431] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:54:50.954 2025] [ 2.124999] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:54:50.963 2025] [ 2.126623] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:54:50.976 2025] [ 2.126657] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:54:50.988 2025] [ 2.129615] fuse: init (API version 7.37) [Fri Jan 03 13:54:50.990 2025] [ 2.130736] systemd[1]: Starting Journal Service... [Fri Jan 03 13:54:50.996 2025] [ 2.138706] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:54:51.003 2025] [ 2.143688] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:54:51.009 2025] [ 2.148868] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:54:51.014 2025] [ 2.153980] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:54:51.021 2025] [ 2.159245] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:54:51.026 2025] [ 2.172289] systemd[1]: Started RPC Bind. [Fri Jan 03 13:54:51.031 2025] [ 2.174651] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:54:51.037 2025] [ 2.178791] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:54:51.043 2025] [ 2.181902] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:54:51.049 2025] [ 2.182854] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:54:51.054 2025] [ 2.189605] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:54:51.060 2025] [ 2.192094] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:54:51.066 2025] [ 2.192813] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:54:51.072 2025] [ 2.195126] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:54:51.077 2025] [ 2.201321] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:54:51.084 2025] [ 2.202198] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:54:51.089 2025] [ 2.203470] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:54:51.095 2025] [ 2.204221] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:54:51.101 2025] [ 2.206343] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:54:51.106 2025] [ 2.210229] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:54:51.112 2025] [ 2.213599] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:54:51.119 2025] [ 2.216861] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:54:51.125 2025] [ 2.239697] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:54:51.132 2025] [ 2.244097] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:54:51.138 2025] [ 2.249427] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:54:51.143 2025] [ 2.263996] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:54:51.149 2025] [ 2.265686] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:54:51.155 2025] [ 2.266599] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:54:51.161 2025] [ 2.267463] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:54:51.168 2025] [ 2.270582] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:54:51.178 2025] [ 2.270931] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:54:51.193 2025] [ 2.273596] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:54:51.201 2025] [ 2.298300] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:54:51.211 2025] [ 2.304234] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:54:51.221 2025] [ 2.352617] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 13:54:51.228 2025] [ 2.353358] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 13:54:51.238 2025] [ 2.358740] systemd[1]: Mounting /media/ram... [Fri Jan 03 13:54:51.240 2025] [ 2.364329] systemd[1]: Mounting /var/volatile... [Fri Jan 03 13:54:51.251 2025] [ 2.369335] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 13:54:51.260 2025] [ 2.370622] systemd[1]: Started Journal Service. [Fri Jan 03 13:54:51.266 2025] [ 2.422137] systemd-journald[194]: Received client request to flush runtime journal. [Fri Jan 03 13:54:51.458 2025] [ 2.788066] random: crng init done [Fri Jan 03 13:54:51.546 2025] [ 2.875347] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:54:51.549 2025] [ 2.875364] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:54:51.559 2025] [ 2.875386] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:54:51.570 2025] [ 2.875414] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:54:51.577 2025] [ 2.875434] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:54:51.584 2025] [ 2.880759] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:54:51.595 2025] [ 2.880775] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:54:51.598 2025] [ 2.880802] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:54:51.614 2025] [ 2.880832] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:54:51.629 2025] [ 2.880842] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:54:51.645 2025] [ 2.880846] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:54:51.661 2025] [ 2.880856] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:54:51.708 2025] [ 2.880868] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:54:51.739 2025] [ 2.880875] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:54:51.739 2025] [ 2.880879] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:54:51.739 2025] [ 2.880891] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:54:51.772 2025] [ 2.880902] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:54:51.786 2025] [ 2.905777] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:54:51.803 2025] [ 2.905795] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:54:51.815 2025] [ 2.905825] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:54:51.846 2025] [ 2.905829] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:54:51.893 2025] [ 2.905856] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:54:51.924 2025] [ 2.976223] mc: Linux media interface: v0.10 [Fri Jan 03 13:54:51.940 2025] [ 3.027610] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:54:51.956 2025] [ 3.060399] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:54:51.972 2025] [ 3.061569] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:25:08 UTC (1681064708) [Fri Jan 03 13:54:51.972 2025] [ 3.065300] systemd-journald[194]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:54:52.003 2025] [ 3.065333] systemd-journald[194]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:54:52.019 2025] [ 3.069840] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:54:52.034 2025] [ 3.070004] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:54:52.034 2025] [ 3.070254] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:54:52.034 2025] [ 3.071156] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:54:52.050 2025] [ 3.072658] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:54:52.072 2025] [ 3.072690] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:54:52.081 2025] [ 3.072731] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:54:52.081 2025] [ 3.072739] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:54:52.097 2025] [ 3.211075] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:54:52.097 2025] [ 3.225501] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:54:52.113 2025] [ 3.225532] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:54:52.113 2025] [ 3.225537] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:54:52.128 2025] [ 3.225556] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:54:52.144 2025] [ 3.225575] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:54:52.160 2025] [ 3.225596] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:54:52.160 2025] [ 3.225601] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:54:52.176 2025] [ 3.234917] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:54:52.191 2025] [ 3.235084] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:54:52.191 2025] [ 3.235244] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:54:52.207 2025] [ 3.237253] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:54:52.207 2025] [ 3.237336] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:54:52.223 2025] [ 3.261311] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:54:52.223 2025] [ 3.261356] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:54:52.238 2025] [ 3.262548] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:54:52.238 2025] [ 3.262600] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:54:52.254 2025] [ 3.262607] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:54:52.254 2025] [ 3.263264] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:54:52.273 2025] [ 3.264968] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:54:52.285 2025] [ 3.297496] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:54:52.285 2025] [ 3.302534] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:54:52.301 2025] [ 3.302572] Get kick_gpio number= (418) [Fri Jan 03 13:54:52.474 2025] [ 3.818824] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:54:52.490 2025] [ 3.818854] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:54:52.506 2025] [ 3.818871] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:54:52.506 2025] [ 3.818903] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:54:52.552 2025] [ 3.818922] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:54:52.568 2025] [ 3.818928] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:54:52.574 2025] [ 3.826068] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:54:52.584 2025] [ 3.837102] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:54:52.584 2025] [ 3.838895] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:54:52.710 2025] [ 4.053565] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:54:52.725 2025] [ 4.060777] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:54:52.741 2025] [ 4.060824] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:54:52.775 2025] [ 4.074573] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:54:52.788 2025] [ 4.074598] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:54:52.820 2025] [ 4.080111] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 13:54:52.820 2025] [ 4.086224] hub 1-0:1.0: USB hub found [Fri Jan 03 13:54:52.835 2025] [ 4.086309] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:54:52.993 2025] [ 4.325131] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:54:53.150 2025] [ 4.496874] hub 1-1:1.0: USB hub found [Fri Jan 03 13:54:53.166 2025] [ 4.497003] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:54:53.244 2025] [ 4.587806] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:54:53.292 2025] [ 4.634775] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:54:53.307 2025] [ 4.642266] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:54:53.307 2025] [ 4.642309] cfg80211: failed to load regulatory.db [Fri Jan 03 13:54:53.449 2025] [ 4.785327] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:54:53.464 2025] [ 4.785371] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:54:54.133 2025] [ 5.465730] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:54:54.170 2025] [ 5.502608] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:54:54.182 2025] [ 5.502644] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:54:54.317 2025] [ 5.648419] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:54:54.324 2025] [ 5.648463] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:54.334 2025] [ 5.667278] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:54:54.340 2025] [ 5.667328] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:54.352 2025] [ 5.682866] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:54:54.413 2025] [ 5.745558] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:54:54.418 2025] [ 5.745603] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:54.436 2025] [ 5.768584] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:54:54.444 2025] [ 5.775239] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:54.917 2025] [ 6.249161] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:54:54.923 2025] [ 6.250364] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:54:55.025 2025] *************************************************************** [Fri Jan 03 13:54:55.030 2025] *************************************************************** [Fri Jan 03 13:54:55.036 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:54:55.041 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:54:55.047 2025] bash [Fri Jan 03 13:54:55.047 2025] cifs-utils [Fri Jan 03 13:54:55.047 2025] dosfstools [Fri Jan 03 13:54:55.047 2025] grub-common [Fri Jan 03 13:54:55.052 2025] grub-editenv [Fri Jan 03 13:54:55.052 2025] grub-efi [Fri Jan 03 13:54:55.057 2025] less [Fri Jan 03 13:54:55.057 2025] lib32-libgcc1 [Fri Jan 03 13:54:55.057 2025] lib32-libstdc++6 [Fri Jan 03 13:54:55.057 2025] libdw1 [Fri Jan 03 13:54:55.061 2025] libelf1 [Fri Jan 03 13:54:55.062 2025] libgcc1 [Fri Jan 03 13:54:55.062 2025] libgdbm-compat4 [Fri Jan 03 13:54:55.062 2025] libgdbm6 [Fri Jan 03 13:54:55.062 2025] libgmp10 [Fri Jan 03 13:54:55.067 2025] libidn2-0 [Fri Jan 03 13:54:55.068 2025] libreadline8 [Fri Jan 03 13:54:55.068 2025] libstdc++6 [Fri Jan 03 13:54:55.068 2025] libunistring2 [Fri Jan 03 13:54:55.072 2025] libvte-2.91-0 [Fri Jan 03 13:54:55.072 2025] nettle [Fri Jan 03 13:54:55.072 2025] onboard [Fri Jan 03 13:54:55.072 2025] parted [Fri Jan 03 13:54:55.072 2025] rxvt-unicode [Fri Jan 03 13:54:55.077 2025] [Fri Jan 03 13:54:55.077 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:54:55.084 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:54:55.089 2025] the opkg remove command. i.e.: [Fri Jan 03 13:54:55.089 2025] opkg remove [Fri Jan 03 13:54:55.094 2025] Where is the name printed in the list above [Fri Jan 03 13:54:55.099 2025] [Fri Jan 03 13:54:55.099 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:54:55.103 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:54:55.108 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:54:55.113 2025] also remove the dependent packages as well [Fri Jan 03 13:54:55.118 2025] *************************************************************** [Fri Jan 03 13:54:55.123 2025] *************************************************************** [Fri Jan 03 13:55:00.323 2025] [Fri Jan 03 13:55:00.323 2025] _____ _____ _ _ [Fri Jan 03 13:55:00.338 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:55:00.338 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:55:00.354 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:55:00.354 2025] |___| |___| [Fri Jan 03 13:55:00.354 2025] [Fri Jan 03 13:55:00.354 2025] Arago Project am62xx-evm - [Fri Jan 03 13:55:00.370 2025] [Fri Jan 03 13:55:00.370 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:55:00.370 2025] [Fri Jan 03 13:55:00.370 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:55:00.370 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:55:00.559 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:55:00.559 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:55:00.731 2025] [ 12.075622] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:00.747 2025] [ 12.075650] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:00.747 2025] [ 12.075670] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.747 2025] [ 12.075723] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:00.762 2025] [ 12.075728] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:00.762 2025] [ 12.075735] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.778 2025] [ 12.075770] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:00.778 2025] [ 12.075776] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:00.778 2025] [ 12.075790] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.794 2025] [ 12.075828] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:00.800 2025] [ 12.075833] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:00.810 2025] [ 12.075845] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.810 2025] [ 12.075879] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:00.810 2025] [ 12.075884] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:00.825 2025] [ 12.075891] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.825 2025] [ 12.075924] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:00.841 2025] [ 12.075931] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:00.841 2025] [ 12.075939] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.841 2025] [ 12.075973] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:00.857 2025] [ 12.075978] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:00.857 2025] [ 12.075985] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:00.872 2025] [ 12.076225] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:00.872 2025] [ 12.076236] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:00.872 2025] [ 12.076251] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.042 2025] [ 14.371617] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:03.046 2025] [ 14.371638] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:03.052 2025] [ 14.371654] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.059 2025] [ 14.371702] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:03.065 2025] [ 14.371707] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:03.071 2025] [ 14.371713] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.077 2025] [ 14.371750] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:03.084 2025] [ 14.371755] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:03.090 2025] [ 14.371763] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.096 2025] [ 14.371798] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:03.102 2025] [ 14.371807] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:03.108 2025] [ 14.371813] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.114 2025] [ 14.371847] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:03.119 2025] [ 14.371851] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:03.125 2025] [ 14.371858] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.132 2025] [ 14.371896] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:03.137 2025] [ 14.371901] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:03.143 2025] [ 14.371908] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.149 2025] [ 14.371941] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:03.155 2025] [ 14.371947] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:03.161 2025] [ 14.371954] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.167 2025] [ 14.371987] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:03.173 2025] [ 14.371992] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:03.181 2025] [ 14.371999] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:03.534 2025] [ 14.866577] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:55:06.858 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:55:06.865 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:55:08.650 2025] [ 19.981734] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:08.658 2025] [ 19.981762] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:08.662 2025] [ 19.981779] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.668 2025] [ 19.981833] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:08.674 2025] [ 19.981838] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:08.680 2025] [ 19.981846] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.686 2025] [ 19.981882] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:08.693 2025] [ 19.981889] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:08.699 2025] [ 19.981897] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.706 2025] [ 19.981931] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:08.712 2025] [ 19.981937] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:08.721 2025] [ 19.981944] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.728 2025] [ 19.981979] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:08.730 2025] [ 19.981983] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:08.737 2025] [ 19.981991] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.744 2025] [ 19.994160] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:08.750 2025] [ 19.994180] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:08.755 2025] [ 19.994204] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.762 2025] [ 19.994270] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:08.768 2025] [ 19.994276] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:08.779 2025] [ 19.994286] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.781 2025] [ 19.994322] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:08.788 2025] [ 19.994327] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:08.796 2025] [ 19.994334] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.801 2025] [ 20.080431] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:08.809 2025] [ 20.080461] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:08.815 2025] [ 20.080503] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.821 2025] [ 20.080587] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:08.826 2025] [ 20.080593] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:08.832 2025] [ 20.080618] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.838 2025] [ 20.080655] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:08.844 2025] [ 20.080678] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:08.850 2025] [ 20.080685] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.856 2025] [ 20.080723] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:08.862 2025] [ 20.080747] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:08.867 2025] [ 20.080756] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.873 2025] [ 20.080810] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:08.883 2025] [ 20.080819] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:08.885 2025] [ 20.080827] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.892 2025] [ 20.080886] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:08.899 2025] [ 20.080894] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:08.904 2025] [ 20.080901] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.912 2025] [ 20.080957] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:08.918 2025] [ 20.080964] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:08.925 2025] [ 20.080970] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:08.932 2025] [ 20.091419] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:08.938 2025] [ 20.091520] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:08.945 2025] [ 20.091548] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:41.346 2025] [Fri Jan 03 13:55:41.346 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:55:41.361 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:55:41.415 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:55:41.440 2025] Trying to boot from MMC1 [Fri Jan 03 13:55:41.596 2025] Authentication passed [Fri Jan 03 13:55:41.616 2025] Authentication passed [Fri Jan 03 13:55:41.616 2025] Authentication passed [Fri Jan 03 13:55:41.643 2025] Authentication passed [Fri Jan 03 13:55:41.659 2025] Authentication passed [Fri Jan 03 13:55:41.659 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:55:41.659 2025] [Fri Jan 03 13:55:41.674 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:55:41.674 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:55:41.970 2025] [Fri Jan 03 13:55:41.970 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:55:41.970 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:55:42.016 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:55:42.016 2025] Error: could not access storage. [Fri Jan 03 13:55:42.016 2025] Trying to boot from MMC1 [Fri Jan 03 13:55:42.174 2025] Authentication passed [Fri Jan 03 13:55:42.189 2025] Authentication passed [Fri Jan 03 13:55:42.836 2025] [Fri Jan 03 13:55:42.836 2025] [Fri Jan 03 13:55:42.836 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:55:42.836 2025] [Fri Jan 03 13:55:42.836 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:55:42.836 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:55:42.852 2025] DRAM: 2 GiB [Fri Jan 03 13:55:43.088 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:55:43.088 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:55:43.103 2025] Loading Environment from MMC... OK [Fri Jan 03 13:55:43.307 2025] In: serial [Fri Jan 03 13:55:43.307 2025] Out: serial [Fri Jan 03 13:55:43.307 2025] Err: serial [Fri Jan 03 13:55:43.307 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:55:43.307 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:55:43.465 2025] switch to partitions #0, OK [Fri Jan 03 13:55:43.465 2025] mmc0(part 0) is current device [Fri Jan 03 13:55:43.631 2025] SD/MMC found on device 0 [Fri Jan 03 13:55:43.631 2025] Running eMMC boot ... [Fri Jan 03 13:55:43.644 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 13:55:43.649 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:55:43.651 2025] Importing environment from mmc0 ... [Fri Jan 03 13:55:43.873 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:55:43.895 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:55:43.899 2025] Working FDT set to 88000000 [Fri Jan 03 13:55:43.904 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:55:43.909 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:55:43.914 2025] Working FDT set to 88000000 [Fri Jan 03 13:55:43.935 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:55:43.943 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:55:43.950 2025] Working FDT set to 8feed000 [Fri Jan 03 13:55:43.960 2025] [Fri Jan 03 13:55:43.961 2025] Starting kernel ... [Fri Jan 03 13:55:43.967 2025] [Fri Jan 03 13:55:43.997 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:55:44.004 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:55:44.022 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:55:44.028 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:55:44.118 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:55:44.123 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:55:44.128 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:55:44.136 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:55:44.142 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:55:44.154 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:55:44.161 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:55:44.169 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:55:44.178 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:55:44.186 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:55:44.195 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:55:44.207 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:55:44.213 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:55:44.220 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:55:44.229 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:55:44.235 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:55:44.241 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:55:44.246 2025] [ 0.000000] Normal empty [Fri Jan 03 13:55:44.251 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:55:44.256 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:55:44.256 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:55:44.262 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:55:44.268 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:55:44.273 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:55:44.279 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:55:44.285 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:55:44.291 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:55:44.298 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:55:44.304 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:55:44.310 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:55:44.316 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:55:44.321 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:55:44.328 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:55:44.337 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:55:44.339 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:55:44.345 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:55:44.351 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:55:44.356 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:55:44.363 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:55:44.369 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:55:44.374 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:55:44.380 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:55:44.386 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:55:44.430 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:55:44.439 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:55:44.447 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:55:44.455 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:55:44.462 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:55:44.480 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:55:44.486 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:55:44.492 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:55:44.497 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:55:44.504 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:55:44.510 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:55:44.517 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:55:44.523 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:55:44.529 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:55:44.535 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:55:44.540 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:55:44.545 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:55:44.550 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:55:44.555 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:55:44.561 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:55:44.566 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:55:44.572 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:55:44.578 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:55:44.586 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:55:44.591 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:55:44.597 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:55:44.603 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:55:44.610 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:55:44.617 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:55:44.623 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:55:44.638 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:55:44.643 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 13:55:44.649 2025] [ 0.528881] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:55:44.660 2025] [ 0.528891] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:55:44.665 2025] [ 0.528977] LSM: Security Framework initializing [Fri Jan 03 13:55:44.672 2025] [ 0.529115] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:55:44.678 2025] [ 0.529139] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:55:44.685 2025] [ 0.530827] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:55:44.692 2025] [ 0.530834] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:55:44.698 2025] [ 0.530879] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:55:44.703 2025] [ 0.583344] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:55:44.709 2025] [ 0.583588] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:55:44.719 2025] [ 0.583674] EFI services will not be available. [Fri Jan 03 13:55:44.724 2025] [ 0.583933] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:55:44.729 2025] [ 0.584701] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:55:44.739 2025] [ 0.584814] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:55:44.741 2025] [ 0.584831] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:55:44.747 2025] [ 0.584887] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:55:44.759 2025] [ 0.634973] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:55:44.761 2025] [ 0.635060] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:55:44.768 2025] [ 0.635072] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:55:44.774 2025] [ 0.635107] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:55:44.785 2025] [ 0.660986] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:55:44.786 2025] [ 0.661064] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:55:44.792 2025] [ 0.661076] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:55:44.798 2025] [ 0.661107] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:55:44.805 2025] [ 0.661166] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:55:44.811 2025] [ 0.661172] SMP: Total of 4 processors activated. [Fri Jan 03 13:55:44.818 2025] [ 0.695361] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:55:44.823 2025] [ 0.695364] CPU features: detected: CRC32 instructions [Fri Jan 03 13:55:44.827 2025] [ 0.695409] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:55:44.832 2025] [ 0.695411] alternatives: applying system-wide alternatives [Fri Jan 03 13:55:44.838 2025] [ 0.696869] devtmpfs: initialized [Fri Jan 03 13:55:44.839 2025] [ 0.708460] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:55:44.847 2025] [ 0.708487] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:55:44.855 2025] [ 0.713619] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:55:44.861 2025] [ 0.714423] DMI not present or invalid. [Fri Jan 03 13:55:44.867 2025] [ 0.714928] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:55:44.872 2025] [ 0.729150] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:55:44.878 2025] [ 0.729524] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:55:44.885 2025] [ 0.729750] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:55:44.893 2025] [ 0.729884] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:55:44.899 2025] [ 0.730065] audit: type=2000 audit(0.728:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:55:44.907 2025] [ 0.730694] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:55:44.912 2025] [ 0.730698] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:55:44.919 2025] [ 0.730941] ASID allocator initialised with 65536 entries [Fri Jan 03 13:55:44.926 2025] [ 0.745843] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:55:44.933 2025] [ 0.754949] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:55:44.940 2025] [ 0.754960] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:55:44.946 2025] [ 0.754964] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:55:44.953 2025] [ 0.754966] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:55:44.960 2025] [ 0.754970] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:55:44.967 2025] [ 0.754973] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:55:44.973 2025] [ 0.754977] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:55:44.980 2025] [ 0.754979] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:55:44.986 2025] [ 0.756094] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:55:44.994 2025] [ 0.756555] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.002 2025] [ 0.756562] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:55:45.009 2025] [ 0.756575] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:55:45.018 2025] [ 0.756590] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:55:45.026 2025] [ 0.756601] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.034 2025] [ 0.756606] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:55:45.044 2025] [ 0.756846] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.051 2025] [ 0.756851] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:55:45.055 2025] [ 0.756863] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:55:45.063 2025] [ 0.756876] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:55:45.073 2025] [ 0.756884] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.079 2025] [ 0.756888] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:55:45.086 2025] [ 0.757143] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.093 2025] [ 0.757148] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:55:45.100 2025] [ 0.757157] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:55:45.109 2025] [ 0.757169] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:55:45.121 2025] [ 0.757178] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.124 2025] [ 0.757182] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:55:45.132 2025] [ 0.757384] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.139 2025] [ 1[.020574] printk: console [ttyS2] printing thread started [Fri Jan 03 13:55:45.145 2025] 0.757389] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:55:45.152 2025] [ 1.020599] printk: console [ttyS2] enabled [Fri Jan 03 13:55:45.158 2025] [ 1.020603] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:55:45.163 2025] [ 1.033402] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:55:45.169 2025] [ 1.034650] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:55:45.175 2025] [ 1.034660] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:55:45.181 2025] [ 1.034673] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:55:45.194 2025] [ 1.034692] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:55:45.201 2025] [ 1.034703] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.208 2025] [ 1.034709] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:55:45.215 2025] [ 1.034737] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:55:45.224 2025] [ 1.035710] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:55:45.230 2025] [ 1.035718] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:55:45.236 2025] [ 1.035729] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:55:45.245 2025] [ 1.035743] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:55:45.254 2025] [ 1.035752] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.265 2025] [ 1.035757] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:55:45.267 2025] [ 1.038809] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:55:45.275 2025] [ 1.045498] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:55:45.281 2025] [ 1.052119] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:55:45.288 2025] [ 1.052536] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:55:45.294 2025] [ 1.052542] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:55:45.300 2025] [ 1.052561] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:55:45.311 2025] [ 1.052578] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:55:45.322 2025] [ 1.052592] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.328 2025] [ 1.052598] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:55:45.336 2025] [ 1.085983] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:55:45.342 2025] [ 1.086271] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:55:45.348 2025] [ 1.087026] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:55:45.355 2025] [ 1.087034] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:55:45.361 2025] [ 1.087045] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:55:45.373 2025] [ 1.087072] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:55:45.385 2025] [ 1.087088] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.392 2025] [ 1.087093] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:55:45.399 2025] [ 1.087856] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:55:45.406 2025] [ 1.087900] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:55:45.419 2025] [ 1.088177] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:55:45.426 2025] [ 1.088190] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:55:45.438 2025] [ 1.088195] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:55:45.440 2025] [ 1.088988] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:55:45.448 2025] [ 1.105495] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:55:45.455 2025] [ 1.110477] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:55:45.461 2025] [ 1.110494] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:55:45.468 2025] [ 1.110508] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:55:45.477 2025] [ 1.110542] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:55:45.484 2025] [ 1.110540] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:55:45.492 2025] [ 1.110546] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:55:45.500 2025] [ 1.110553] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.507 2025] [ 1.110557] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:55:45.512 2025] [ 1.110556] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:55:45.521 2025] [ 1.110572] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:55:45.530 2025] [ 1.110574] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:55:45.539 2025] [ 1.110586] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.547 2025] [ 1.110593] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:55:45.553 2025] [ 1.110598] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:55:45.559 2025] [ 1.110601] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:55:45.565 2025] [ 1.110610] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:55:45.578 2025] [ 1.110622] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:55:45.586 2025] [ 1.110630] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.593 2025] [ 1.110634] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:55:45.598 2025] [ 1.111489] mmc1: CQHCI version 5.10 [Fri Jan 03 13:55:45.598 2025] [ 1.112066] mmc0: CQHCI version 5.10 [Fri Jan 03 13:55:45.598 2025] [ 1.112293] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:55:45.614 2025] [ 1.112300] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:55:45.614 2025] [ 1.112313] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:55:45.623 2025] [ 1.112338] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:55:45.630 2025] [ 1.112349] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.630 2025] [ 1.112355] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:55:45.645 2025] [ 1.112824] mmc2: CQHCI version 5.10 [Fri Jan 03 13:55:45.645 2025] [ 1.114233] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:55:45.661 2025] [ 1.116600] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:55:45.661 2025] [ 1.119481] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:55:45.676 2025] [ 1.119676] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:55:45.676 2025] [ 1.119739] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:55:45.692 2025] [ 1.122815] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:55:45.692 2025] [ 1.123050] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:55:45.692 2025] [ 1.123144] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:55:45.708 2025] [ 1.124726] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.708 2025] [ 1.124736] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:55:45.724 2025] [ 1.124756] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:55:45.724 2025] [ 1.124771] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:55:45.739 2025] [ 1.124783] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:55:45.739 2025] [ 1.124787] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:55:45.739 2025] [ 1.124798] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:55:45.755 2025] [ 1.124809] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:55:45.755 2025] [ 1.124818] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:55:45.771 2025] [ 1.124823] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:55:45.771 2025] [ 1.125251] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:55:45.786 2025] [ 1.125256] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:55:45.786 2025] [ 1.125273] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:55:45.802 2025] [ 1.125284] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:55:45.802 2025] [ 1.125288] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:55:45.817 2025] [ 1.125767] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:55:45.823 2025] [ 1.125780] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:55:45.823 2025] [ 1.125783] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:55:45.834 2025] [ 1.125884] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:55:45.834 2025] [ 1.125896] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:55:45.849 2025] [ 1.125899] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:55:45.849 2025] [ 1.125973] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:55:45.865 2025] [ 1.125985] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:45.865 2025] [ 1.125988] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:55:45.865 2025] [ 1.126693] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:55:45.880 2025] [ 1.129662] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:55:45.880 2025] [ 1.141890] ALSA device list: [Fri Jan 03 13:55:45.896 2025] [ 1.141906] No soundcards found. [Fri Jan 03 13:55:45.896 2025] [ 1.147242] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:55:45.896 2025] [ 1.154176] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:55:45.912 2025] [ 1.157813] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:55:45.912 2025] [ 1.157989] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:55:45.928 2025] [ 1.203690] mmc1: new MMC card at address 0001 [Fri Jan 03 13:55:45.928 2025] [ 1.204539] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:55:45.928 2025] [ 1.212636] mmcblk1: p1 [Fri Jan 03 13:55:45.928 2025] [ 1.213452] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:55:45.943 2025] [ 1.215234] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:55:45.943 2025] [ 1.216785] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:55:45.943 2025] [ 1.268131] mmc0: Command Queue Engine enabled [Fri Jan 03 13:55:45.959 2025] [ 1.268147] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:55:45.959 2025] [ 1.268862] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:55:45.975 2025] [ 1.272788] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:55:45.975 2025] [ 1.273840] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:55:45.975 2025] [ 1.275180] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:55:45.975 2025] [ 1.276277] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:55:45.990 2025] [ 1.291758] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:55:45.990 2025] [ 1.292137] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:45.990 2025] [ 1.292219] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:55:46.006 2025] [ 1.292368] devtmpfs: mounted [Fri Jan 03 13:55:46.006 2025] [ 1.293785] Freeing unused kernel memory: 1856K [Fri Jan 03 13:55:46.021 2025] [ 1.302056] Run /sbin/init as init process [Fri Jan 03 13:55:46.023 2025] [ 1.302061] with arguments: [Fri Jan 03 13:55:46.023 2025] [ 1.302063] /sbin/init [Fri Jan 03 13:55:46.023 2025] [ 1.302065] with environment: [Fri Jan 03 13:55:46.023 2025] [ 1.302066] HOME=/ [Fri Jan 03 13:55:46.037 2025] [ 1.302068] TERM=linux [Fri Jan 03 13:55:46.037 2025] [ 1.302070] syntec_extend= [Fri Jan 03 13:55:46.037 2025] [ 1.393522] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:55:46.037 2025] [ 1.423088] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:55:46.053 2025] [ 1.424287] Segment Routing with IPv6 [Fri Jan 03 13:55:46.053 2025] [ 1.424324] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:55:46.053 2025] [ 1.440914] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:55:46.084 2025] [ 1.441473] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:55:46.084 2025] [ 1.444748] systemd[1]: Hostname set to . [Fri Jan 03 13:55:46.100 2025] [ 1.571633] systemd-sysv-generator[179]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:55:46.124 2025] [ 1.874954] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:55:46.132 2025] [ 1.877752] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:55:46.147 2025] [ 1.940778] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:55:46.163 2025] [ 1.944078] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:55:46.163 2025] [ 1.945621] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:55:46.179 2025] [ 1.946093] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:55:46.179 2025] [ 1.946438] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:55:46.179 2025] [ 1.946648] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:55:46.194 2025] [ 1.947030] systemd[1]: Reached target Path Units. [Fri Jan 03 13:55:46.194 2025] [ 1.947135] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:55:46.210 2025] [ 1.947210] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:55:46.210 2025] [ 1.947297] systemd[1]: Reached target Swaps. [Fri Jan 03 13:55:46.210 2025] [ 1.951537] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:55:46.226 2025] [ 1.951710] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:55:46.226 2025] [ 1.957769] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:55:46.241 2025] [ 1.958269] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:55:46.241 2025] [ 1.959105] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:55:46.257 2025] [ 1.959668] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:55:46.257 2025] [ 1.960237] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:55:46.257 2025] [ 1.961010] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:55:46.273 2025] [ 1.962800] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:55:46.273 2025] [ 1.963343] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:55:46.273 2025] [ 1.963831] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:55:46.288 2025] [ 1.981745] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:55:46.288 2025] [ 1.985821] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:55:46.304 2025] [ 1.990202] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:55:46.304 2025] [ 1.991103] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:55:46.320 2025] [ 1.992389] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:55:46.324 2025] [ 1.996325] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:55:46.336 2025] [ 2.002219] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:55:46.351 2025] [ 2.007584] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:55:46.367 2025] [ 2.012850] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:55:46.367 2025] [ 2.018153] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:55:46.367 2025] [ 2.024657] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:55:46.382 2025] [ 2.025182] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:55:46.398 2025] [ 2.026451] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:55:46.398 2025] [ 2.026472] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:55:46.414 2025] [ 2.029654] systemd[1]: Starting Journal Service... [Fri Jan 03 13:55:46.414 2025] [ 2.037254] fuse: init (API version 7.37) [Fri Jan 03 13:55:46.424 2025] [ 2.039769] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:55:46.430 2025] [ 2.048860] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:55:46.430 2025] [ 2.062419] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:55:46.445 2025] [ 2.067663] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:55:46.445 2025] [ 2.070232] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:55:46.445 2025] [ 2.074585] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:55:46.461 2025] [ 2.080528] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:55:46.461 2025] [ 2.106764] systemd[1]: Started RPC Bind. [Fri Jan 03 13:55:46.461 2025] [ 2.107787] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:55:46.477 2025] [ 2.109371] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:55:46.477 2025] [ 2.121292] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:55:46.477 2025] [ 2.123534] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:55:46.492 2025] [ 2.132013] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:55:46.492 2025] [ 2.135652] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:55:46.508 2025] [ 2.138081] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:55:46.508 2025] [ 2.138703] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:55:46.508 2025] [ 2.140225] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:55:46.525 2025] [ 2.140781] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:55:46.525 2025] [ 2.142067] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:55:46.525 2025] [ 2.142629] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:55:46.540 2025] [ 2.143903] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:55:46.540 2025] [ 2.145146] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:55:46.555 2025] [ 2.146323] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:55:46.555 2025] [ 2.147505] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:55:46.571 2025] [ 2.178801] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:55:46.571 2025] [ 2.182883] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:55:46.586 2025] [ 2.185708] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:55:46.602 2025] [ 2.186203] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:55:46.618 2025] [ 2.190718] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:55:46.625 2025] [ 2.194535] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:55:46.634 2025] [ 2.202424] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:55:46.634 2025] [ 2.213111] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:55:46.634 2025] [ 2.213915] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:55:46.649 2025] [ 2.237733] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:55:46.649 2025] [ 2.241901] systemd[1]: Started Journal Service. [Fri Jan 03 13:55:46.649 2025] [ 2.276616] systemd-journald[190]: Received client request to flush runtime journal. [Fri Jan 03 13:55:46.806 2025] [ 2.699048] random: crng init done [Fri Jan 03 13:55:46.916 2025] [ 2.805438] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:55:46.926 2025] [ 2.805455] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:55:46.932 2025] [ 2.805468] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:55:46.932 2025] [ 2.805504] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:55:46.964 2025] [ 2.805521] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:55:47.042 2025] [ 2.811445] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:55:47.057 2025] [ 2.811463] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:55:47.057 2025] [ 2.811491] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:55:47.089 2025] [ 2.811525] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:55:47.089 2025] [ 2.811537] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:55:47.104 2025] [ 2.811541] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:55:47.120 2025] [ 2.811552] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:55:47.136 2025] [ 2.811563] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:55:47.151 2025] [ 2.811576] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:55:47.151 2025] [ 2.811582] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:55:47.167 2025] [ 2.811592] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:55:47.183 2025] [ 2.811603] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:55:47.183 2025] [ 2.818072] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:55:47.198 2025] [ 2.818089] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:55:47.198 2025] [ 2.818124] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:55:47.214 2025] [ 2.818127] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:55:47.226 2025] [ 2.818152] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:47.230 2025] [ 2.884461] mc: Linux media interface: v0.10 [Fri Jan 03 13:55:47.230 2025] [ 2.947702] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:55:47.246 2025] [ 2.967822] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:55:47.246 2025] [ 2.970000] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:26:04 UTC (1681064764) [Fri Jan 03 13:55:47.246 2025] [ 2.972064] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:55:47.261 2025] [ 2.972088] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:55:47.293 2025] [ 3.030020] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:55:47.293 2025] [ 3.032706] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:55:47.293 2025] [ 3.034409] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:55:47.308 2025] [ 3.034856] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:55:47.308 2025] [ 3.036527] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:55:47.327 2025] [ 3.036580] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:55:47.327 2025] [ 3.036621] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:55:47.340 2025] [ 3.036630] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:55:47.340 2025] [ 3.193941] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:55:47.355 2025] [ 3.194009] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:55:47.371 2025] [ 3.194014] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:55:47.371 2025] [ 3.194035] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:55:47.387 2025] [ 3.194068] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:55:47.418 2025] [ 3.194086] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:55:47.427 2025] [ 3.194092] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:55:47.434 2025] [ 3.209055] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:55:47.450 2025] [ 3.209199] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:55:47.450 2025] [ 3.209320] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:55:47.465 2025] [ 3.209638] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:55:47.481 2025] [ 3.209757] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:55:47.481 2025] [ 3.240293] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:55:47.512 2025] [ 3.248691] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:55:47.528 2025] [ 3.248734] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:55:47.528 2025] [ 3.252666] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:55:47.544 2025] [ 3.252741] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:55:47.544 2025] [ 3.252748] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:55:47.559 2025] [ 3.252947] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:55:47.575 2025] [ 3.253103] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:55:47.591 2025] [ 3.361246] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:55:47.608 2025] [ 3.365195] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:55:47.639 2025] [ 3.365248] Get kick_gpio number= (418) [Fri Jan 03 13:55:48.390 2025] [ 4.271856] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:55:48.457 2025] [ 4.338455] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:55:48.464 2025] [ 4.339545] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:55:48.474 2025] [ 4.339581] cfg80211: failed to load regulatory.db [Fri Jan 03 13:55:48.585 2025] [ 4.466321] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:55:48.590 2025] [ 4.466346] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:55:48.608 2025] [ 4.466365] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:55:48.649 2025] [ 4.466443] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:55:48.681 2025] [ 4.466461] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:55:48.712 2025] [ 4.466467] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:55:48.725 2025] [ 4.466660] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:55:48.736 2025] [ 4.506353] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:55:48.754 2025] [ 4.508455] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:55:48.769 2025] [ 4.650169] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:55:48.787 2025] [ 4.650205] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:55:48.934 2025] [ 4.815083] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:55:48.993 2025] [ 4.873309] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:55:49.009 2025] [ 4.873366] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:55:49.015 2025] [ 4.873575] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:55:49.022 2025] [ 4.873583] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:55:49.035 2025] [ 4.874358] xhci-hcd xhci-hcd.4.auto: irq 469, io mem 0x31100000 [Fri Jan 03 13:55:49.043 2025] [ 4.885059] hub 1-0:1.0: USB hub found [Fri Jan 03 13:55:49.052 2025] [ 4.885132] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:55:49.244 2025] [ 5.125149] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:55:49.410 2025] [ 5.291153] hub 1-1:1.0: USB hub found [Fri Jan 03 13:55:49.415 2025] [ 5.291316] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:55:49.492 2025] [ 5.373149] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:55:49.497 2025] [ 5.373230] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:49.509 2025] [ 5.390836] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:55:49.514 2025] [ 5.390890] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:49.645 2025] [ 5.532557] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:55:49.692 2025] [ 5.588162] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:55:49.708 2025] [ 5.588196] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:55:49.896 2025] [ 5.782304] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:55:49.896 2025] [ 5.782345] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:49.912 2025] [ 5.798449] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:55:49.990 2025] [ 5.871321] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:55:49.990 2025] [ 5.876854] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:50.243 2025] *************************************************************** [Fri Jan 03 13:55:50.243 2025] *************************************************************** [Fri Jan 03 13:55:50.259 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:55:50.259 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:55:50.259 2025] bash [Fri Jan 03 13:55:50.259 2025] cifs-utils [Fri Jan 03 13:55:50.259 2025] dosfstools [Fri Jan 03 13:55:50.259 2025] grub-common [Fri Jan 03 13:55:50.259 2025] grub-editenv [Fri Jan 03 13:55:50.259 2025] grub-efi [Fri Jan 03 13:55:50.259 2025] less [Fri Jan 03 13:55:50.274 2025] lib32-libgcc1 [Fri Jan 03 13:55:50.274 2025] lib32-libstdc++6 [Fri Jan 03 13:55:50.274 2025] libdw1 [Fri Jan 03 13:55:50.274 2025] libelf1 [Fri Jan 03 13:55:50.274 2025] libgcc1 [Fri Jan 03 13:55:50.274 2025] libgdbm-compat4 [Fri Jan 03 13:55:50.274 2025] libgdbm6 [Fri Jan 03 13:55:50.274 2025] libgmp10 [Fri Jan 03 13:55:50.274 2025] libidn2-0 [Fri Jan 03 13:55:50.274 2025] libreadline8 [Fri Jan 03 13:55:50.274 2025] libstdc++6 [Fri Jan 03 13:55:50.274 2025] libunistring2 [Fri Jan 03 13:55:50.274 2025] libvte-2.91-0 [Fri Jan 03 13:55:50.290 2025] nettle [Fri Jan 03 13:55:50.290 2025] onboard [Fri Jan 03 13:55:50.290 2025] parted [Fri Jan 03 13:55:50.290 2025] rxvt-unicode [Fri Jan 03 13:55:50.290 2025] [Fri Jan 03 13:55:50.290 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:55:50.290 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:55:50.290 2025] the opkg remove command. i.e.: [Fri Jan 03 13:55:50.290 2025] opkg remove [Fri Jan 03 13:55:50.306 2025] Where is the name printed in the list above [Fri Jan 03 13:55:50.306 2025] [Fri Jan 03 13:55:50.306 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:55:50.306 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:55:50.321 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:55:50.321 2025] also remove the dependent packages as well [Fri Jan 03 13:55:50.334 2025] *************************************************************** [Fri Jan 03 13:55:50.337 2025] *************************************************************** [Fri Jan 03 13:55:50.337 2025] [ 6.221932] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:55:50.353 2025] [ 6.224014] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:55:55.337 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:55:55.344 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:55:55.522 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:55:55.528 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:55:55.707 2025] [ 11.587911] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:55.712 2025] [ 11.587938] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:55.718 2025] [ 11.588046] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.730 2025] [ 11.588107] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:55.732 2025] [ 11.588113] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:55.740 2025] [ 11.588120] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.745 2025] [ 11.588160] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:55.751 2025] [ 11.588166] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:55.758 2025] [ 11.588172] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.764 2025] [ 11.588208] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:55.770 2025] [ 11.588213] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:55.776 2025] [ 11.588224] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.782 2025] [ 11.588258] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:55.788 2025] [ 11.588263] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:55.793 2025] [ 11.588270] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.799 2025] [ 11.588306] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:55.805 2025] [ 11.588311] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:55.811 2025] [ 11.588318] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.817 2025] [ 11.588352] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:55.822 2025] [ 11.588358] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:55.833 2025] [ 11.588368] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.835 2025] [ 11.588402] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:55.841 2025] [ 11.588407] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:55.848 2025] [ 11.588414] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:55.883 2025] [Fri Jan 03 13:55:55.883 2025] _____ _____ _ _ [Fri Jan 03 13:55:55.888 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:55:55.894 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:55:55.899 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:55:55.905 2025] |___| |___| [Fri Jan 03 13:55:55.912 2025] [Fri Jan 03 13:55:55.912 2025] Arago Project am62xx-evm - [Fri Jan 03 13:55:55.912 2025] [Fri Jan 03 13:55:55.912 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:55:55.917 2025] [Fri Jan 03 13:55:55.917 2025] am62xx-evm login: [ 13.842762] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:55:57.967 2025] [ 13.842784] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:55:57.973 2025] [ 13.842801] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:57.980 2025] [ 13.842851] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:55:57.989 2025] [ 13.842856] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:55:57.997 2025] [ 13.842863] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:57.999 2025] [ 13.842901] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:55:58.005 2025] [ 13.842906] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:55:58.011 2025] [ 13.842912] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.017 2025] [ 13.842945] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:55:58.022 2025] [ 13.842951] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:55:58.028 2025] [ 13.843030] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.034 2025] [ 13.843069] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:55:58.040 2025] [ 13.843074] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:55:58.046 2025] [ 13.843081] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.052 2025] [ 13.843117] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:55:58.064 2025] [ 13.843122] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:55:58.066 2025] [ 13.843129] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.072 2025] [ 13.843162] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:55:58.078 2025] [ 13.843167] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:55:58.084 2025] [ 13.843176] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.090 2025] [ 13.843209] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:55:58.096 2025] [ 13.843214] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:55:58.102 2025] [ 13.843222] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:55:58.450 2025] [ 14.331331] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:56:01.707 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:56:01.707 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:56:03.448 2025] [ 19.336104] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:03.448 2025] [ 19.336132] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:03.463 2025] [ 19.336150] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.463 2025] [ 19.336206] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:03.479 2025] [ 19.336211] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:03.479 2025] [ 19.336218] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.479 2025] [ 19.336253] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:03.495 2025] [ 19.336258] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:03.495 2025] [ 19.336264] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.510 2025] [ 19.336302] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:03.510 2025] [ 19.336308] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:03.510 2025] [ 19.336315] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.526 2025] [ 19.336351] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:03.526 2025] [ 19.336357] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:03.542 2025] [ 19.336365] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.542 2025] [ 19.336400] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:03.542 2025] [ 19.336405] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:03.557 2025] [ 19.336412] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.557 2025] [ 19.336446] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:03.557 2025] [ 19.336453] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:03.573 2025] [ 19.336459] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.579 2025] [ 19.336494] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:03.589 2025] [ 19.336499] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:03.589 2025] [ 19.336506] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.589 2025] [ 19.411536] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:03.605 2025] [ 19.411562] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:03.605 2025] [ 19.411605] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.620 2025] [ 19.411737] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:03.629 2025] [ 19.411743] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:03.635 2025] [ 19.411753] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.640 2025] [ 19.411815] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:03.646 2025] [ 19.411821] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:03.653 2025] [ 19.411829] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.663 2025] [ 19.411883] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:03.668 2025] [ 19.411888] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:03.673 2025] [ 19.411895] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.679 2025] [ 19.411953] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:03.684 2025] [ 19.423183] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:03.692 2025] [ 19.423298] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.697 2025] [ 19.423682] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:03.702 2025] [ 19.423692] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:03.708 2025] [ 19.423783] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.714 2025] [ 19.423938] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:03.720 2025] [ 19.423948] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:03.726 2025] [ 19.424084] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:03.733 2025] [ 19.424339] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:03.739 2025] [ 19.424349] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:03.746 2025] [ 19.424364] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:36.049 2025] [Fri Jan 03 13:56:36.049 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:56:36.071 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:56:36.124 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:56:36.145 2025] Trying to boot from MMC1 [Fri Jan 03 13:56:36.316 2025] Authentication passed [Fri Jan 03 13:56:36.316 2025] Authentication passed [Fri Jan 03 13:56:36.327 2025] Authentication passed [Fri Jan 03 13:56:36.363 2025] Authentication passed [Fri Jan 03 13:56:36.370 2025] Authentication passed [Fri Jan 03 13:56:36.370 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:56:36.370 2025] [Fri Jan 03 13:56:36.379 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:56:36.380 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:56:36.681 2025] [Fri Jan 03 13:56:36.681 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:56:36.681 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:56:36.728 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:56:36.728 2025] Error: could not access storage. [Fri Jan 03 13:56:36.728 2025] Trying to boot from MMC1 [Fri Jan 03 13:56:36.885 2025] Authentication passed [Fri Jan 03 13:56:36.901 2025] Authentication passed [Fri Jan 03 13:56:37.553 2025] [Fri Jan 03 13:56:37.553 2025] [Fri Jan 03 13:56:37.553 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:56:37.558 2025] [Fri Jan 03 13:56:37.558 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:56:37.558 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:56:37.564 2025] DRAM: 2 GiB [Fri Jan 03 13:56:37.809 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:56:37.813 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:56:37.824 2025] Loading Environment from MMC... OK [Fri Jan 03 13:56:38.028 2025] In: serial [Fri Jan 03 13:56:38.029 2025] Out: serial [Fri Jan 03 13:56:38.029 2025] Err: serial [Fri Jan 03 13:56:38.031 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:56:38.033 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:56:38.199 2025] switch to partitions #0, OK [Fri Jan 03 13:56:38.201 2025] mmc0(part 0) is current device [Fri Jan 03 13:56:38.345 2025] SD/MMC found on device 0 [Fri Jan 03 13:56:38.347 2025] Running eMMC boot ... [Fri Jan 03 13:56:38.365 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 13:56:38.368 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:56:38.372 2025] Importing environment from mmc0 ... [Fri Jan 03 13:56:38.594 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:56:38.619 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:56:38.621 2025] Working FDT set to 88000000 [Fri Jan 03 13:56:38.623 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:56:38.628 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:56:38.632 2025] Working FDT set to 88000000 [Fri Jan 03 13:56:38.658 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:56:38.665 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:56:38.675 2025] Working FDT set to 8feed000 [Fri Jan 03 13:56:38.682 2025] [Fri Jan 03 13:56:38.683 2025] Starting kernel ... [Fri Jan 03 13:56:38.684 2025] [Fri Jan 03 13:56:38.719 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:56:38.729 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:56:38.744 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:56:38.749 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:56:38.841 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:56:38.846 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:56:38.849 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:56:38.857 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:56:38.868 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:56:38.873 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:56:38.883 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:56:38.891 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:56:38.901 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:56:38.909 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:56:38.919 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:56:38.926 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:56:38.935 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:56:38.943 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:56:38.952 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:56:38.955 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:56:38.961 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:56:38.964 2025] [ 0.000000] Normal empty [Fri Jan 03 13:56:38.967 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:56:38.972 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:56:38.975 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:56:38.981 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:56:38.987 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:56:38.994 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:56:39.000 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:56:39.007 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:56:39.013 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:56:39.020 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:56:39.028 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:56:39.034 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:56:39.037 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:56:39.043 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:56:39.048 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:56:39.052 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:56:39.059 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:56:39.065 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:56:39.069 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:56:39.074 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:56:39.080 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:56:39.088 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:56:39.092 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:56:39.099 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:56:39.105 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:56:39.152 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:56:39.162 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:56:39.170 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:56:39.178 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:56:39.184 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:56:39.199 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:56:39.205 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:56:39.212 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:56:39.218 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:56:39.225 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:56:39.231 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:56:39.239 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:56:39.248 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:56:39.253 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:56:39.256 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:56:39.259 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:56:39.265 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:56:39.268 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:56:39.273 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:56:39.280 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:56:39.285 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:56:39.291 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:56:39.299 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:56:39.308 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:56:39.313 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:56:39.319 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:56:39.326 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:56:39.334 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:56:39.340 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:56:39.345 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:56:39.356 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:56:39.365 2025] [ 0.000249] Console: colour dummy device 80x25 [Fri Jan 03 13:56:39.370 2025] [ 0.528872] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:56:39.383 2025] [ 0.528883] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:56:39.387 2025] [ 0.528966] LSM: Security Framework initializing [Fri Jan 03 13:56:39.392 2025] [ 0.529104] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:56:39.400 2025] [ 0.529127] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:56:39.408 2025] [ 0.530814] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:56:39.412 2025] [ 0.530822] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:56:39.418 2025] [ 0.530867] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:56:39.425 2025] [ 0.583328] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:56:39.431 2025] [ 0.583569] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:56:39.441 2025] [ 0.583654] EFI services will not be available. [Fri Jan 03 13:56:39.445 2025] [ 0.583907] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:56:39.450 2025] [ 0.584679] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:56:39.456 2025] [ 0.584791] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:56:39.460 2025] [ 0.584808] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:56:39.468 2025] [ 0.584862] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:56:39.476 2025] [ 0.634951] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:56:39.480 2025] [ 0.635040] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:56:39.487 2025] [ 0.635053] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:56:39.495 2025] [ 0.635083] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:56:39.501 2025] [ 0.660957] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:56:39.506 2025] [ 0.661041] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:56:39.513 2025] [ 0.661052] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:56:39.522 2025] [ 0.661083] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:56:39.527 2025] [ 0.661142] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:56:39.531 2025] [ 0.661148] SMP: Total of 4 processors activated. [Fri Jan 03 13:56:39.536 2025] [ 0.661151] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:56:39.542 2025] [ 0.700582] CPU features: detected: CRC32 instructions [Fri Jan 03 13:56:39.547 2025] [ 0.700628] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:56:39.552 2025] [ 0.700630] alternatives: applying system-wide alternatives [Fri Jan 03 13:56:39.557 2025] [ 0.702170] devtmpfs: initialized [Fri Jan 03 13:56:39.561 2025] [ 0.713805] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:56:39.571 2025] [ 0.713834] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:56:39.578 2025] [ 0.718979] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:56:39.583 2025] [ 0.719810] DMI not present or invalid. [Fri Jan 03 13:56:39.587 2025] [ 0.720352] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:56:39.593 2025] [ 0.741280] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:56:39.598 2025] [ 0.741573] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:56:39.598 2025] [ 0.741763] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:56:39.613 2025] [ 0.741857] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:56:39.613 2025] [ 0.742015] audit: type=2000 audit(0.739:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:56:39.629 2025] [ 0.742653] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:56:39.629 2025] [ 0.742658] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:56:39.629 2025] [ 0.742916] ASID allocator initialised with 65536 entries [Fri Jan 03 13:56:39.645 2025] [ 0.757841] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:56:39.645 2025] [ 0.766897] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:56:39.661 2025] [ 0.766909] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:56:39.661 2025] [ 0.766913] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:56:39.661 2025] [ 0.766915] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:56:39.676 2025] [ 0.766919] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:56:39.676 2025] [ 0.766921] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:56:39.692 2025] [ 0.766925] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:56:39.692 2025] [ 0.766928] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:56:39.708 2025] [ 0.768134] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:56:39.708 2025] [ 0.768605] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:56:39.723 2025] [ 0.768611] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:56:39.730 2025] [ 0.768625] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:56:39.739 2025] [ 0.768640] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:56:39.739 2025] [ 0.768651] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:56:39.755 2025] [ 0.768657] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:56:39.755 2025] [ 0.768893] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:56:39.755 2025] [ 0.768898] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:56:39.771 2025] [ 0.768911] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:56:39.771 2025] [ 0.768924] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:56:39.786 2025] [ 0.768932] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:56:39.802 2025] [ 0.768936] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:56:39.802 2025] [ 0.769193] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:56:39.802 2025] [ 0.769198] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:56:39.817 2025] [ 0.769207] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:56:39.830 2025] [ 0.769220] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:56:39.833 2025] [ 0.769228] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:56:39.833 2025] [ 0.769232] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:56:39.849 2025] [ 0.769438] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:56:39.849 2025] [ 0.769443] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:56:39.865 2025] [[ 1.028044] printk: console [ttyS2] printing thread started [Fri Jan 03 13:56:39.865 2025] 0.769452] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 13:56:39.880 2025] [ 1.028118] printk: console [ttyS2] enabled [Fri Jan 03 13:56:39.880 2025] [ 1.028122] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:56:39.880 2025] [ 1.042286] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:56:39.896 2025] [ 1.043503] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:56:39.896 2025] [ 1.043513] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:56:39.912 2025] [ 1.043526] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:56:39.912 2025] [ 1.043543] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:56:39.930 2025] [ 1.043556] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:56:39.930 2025] [ 1.043561] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:56:39.943 2025] [ 1.043587] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:56:39.943 2025] [ 1.044549] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:56:39.959 2025] [ 1.044558] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:56:39.959 2025] [ 1.044572] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:56:39.975 2025] [ 1.044587] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:56:39.975 2025] [ 1.044597] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:56:39.990 2025] [ 1.044602] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:56:39.990 2025] [ 1.047666] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:56:40.006 2025] [ 1.054674] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:56:40.006 2025] [ 1.061214] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:56:40.006 2025] [ 1.061639] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:56:40.021 2025] [ 1.061645] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:56:40.030 2025] [ 1.061659] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:56:40.037 2025] [ 1.061679] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:56:40.053 2025] [ 1.061693] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.053 2025] [ 1.061698] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:56:40.053 2025] [ 1.095081] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:56:40.069 2025] [ 1.095369] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:56:40.069 2025] [ 1.096171] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:56:40.084 2025] [ 1.096179] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:56:40.084 2025] [ 1.096191] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:56:40.100 2025] [ 1.096215] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:56:40.116 2025] [ 1.096230] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.116 2025] [ 1.096237] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:56:40.131 2025] [ 1.097002] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:56:40.132 2025] [ 1.097050] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:56:40.147 2025] [ 1.097322] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:56:40.147 2025] [ 1.097334] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:56:40.163 2025] [ 1.097338] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:56:40.163 2025] [ 1.098144] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:56:40.179 2025] [ 1.114605] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:56:40.179 2025] [ 1.119465] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:56:40.179 2025] [ 1.119465] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:56:40.194 2025] [ 1.119480] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:56:40.194 2025] [ 1.119480] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:56:40.210 2025] [ 1.119495] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:56:40.210 2025] [ 1.119495] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:56:40.231 2025] [ 1.119518] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:56:40.231 2025] [ 1.119519] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:56:40.241 2025] [ 1.119531] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.257 2025] [ 1.119531] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.257 2025] [ 1.119535] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:56:40.257 2025] [ 1.119536] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:56:40.273 2025] [ 1.119540] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:56:40.273 2025] [ 1.119544] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:56:40.273 2025] [ 1.119547] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:56:40.288 2025] [ 1.119552] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:56:40.304 2025] [ 1.119569] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:56:40.304 2025] [ 1.119577] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.320 2025] [ 1.119581] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:56:40.320 2025] [ 1.120325] mmc1: CQHCI version 5.10 [Fri Jan 03 13:56:40.331 2025] [ 1.120900] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:56:40.336 2025] [ 1.120911] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:56:40.336 2025] [ 1.120924] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:56:40.351 2025] [ 1.120944] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:56:40.351 2025] [ 1.120955] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.367 2025] [ 1.120960] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:56:40.367 2025] [ 1.121784] mmc0: CQHCI version 5.10 [Fri Jan 03 13:56:40.367 2025] [ 1.121860] mmc2: CQHCI version 5.10 [Fri Jan 03 13:56:40.383 2025] [ 1.123560] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:56:40.383 2025] [ 1.125995] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:56:40.398 2025] [ 1.129004] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:56:40.398 2025] [ 1.129223] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:56:40.414 2025] [ 1.129288] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:56:40.414 2025] [ 1.132356] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:56:40.414 2025] [ 1.132557] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:56:40.431 2025] [ 1.132614] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:56:40.431 2025] [ 1.134230] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:56:40.445 2025] [ 1.134240] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:56:40.445 2025] [ 1.134271] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:56:40.461 2025] [ 1.134287] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:56:40.461 2025] [ 1.134299] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:56:40.461 2025] [ 1.134303] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:56:40.477 2025] [ 1.134313] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:56:40.477 2025] [ 1.134324] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:56:40.492 2025] [ 1.134333] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:56:40.508 2025] [ 1.134338] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:56:40.508 2025] [ 1.134764] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:56:40.508 2025] [ 1.134768] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:56:40.524 2025] [ 1.134784] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:56:40.532 2025] [ 1.134794] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:56:40.540 2025] [ 1.134798] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:56:40.540 2025] [ 1.135316] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:56:40.555 2025] [ 1.135328] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:56:40.555 2025] [ 1.135331] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:56:40.555 2025] [ 1.135433] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:56:40.571 2025] [ 1.135444] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:56:40.571 2025] [ 1.135447] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:56:40.587 2025] [ 1.135514] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:56:40.587 2025] [ 1.135525] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:40.602 2025] [ 1.135528] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:56:40.602 2025] [ 1.136203] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:56:40.602 2025] [ 1.139052] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:56:40.618 2025] [ 1.151523] ALSA device list: [Fri Jan 03 13:56:40.618 2025] [ 1.151534] No soundcards found. [Fri Jan 03 13:56:40.618 2025] [ 1.158719] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:56:40.634 2025] [ 1.161597] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:56:40.634 2025] [ 1.174146] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:56:40.649 2025] [ 1.174349] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:56:40.649 2025] [ 1.220254] mmc1: new MMC card at address 0001 [Fri Jan 03 13:56:40.649 2025] [ 1.221077] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:56:40.665 2025] [ 1.229102] mmcblk1: p1 [Fri Jan 03 13:56:40.665 2025] [ 1.229885] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:56:40.665 2025] [ 1.231592] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:56:40.681 2025] [ 1.232965] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:56:40.681 2025] [ 1.277225] mmc0: Command Queue Engine enabled [Fri Jan 03 13:56:40.681 2025] [ 1.277244] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:56:40.696 2025] [ 1.277975] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:56:40.696 2025] [ 1.281959] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:56:40.696 2025] [ 1.283033] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:56:40.696 2025] [ 1.284356] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:56:40.712 2025] [ 1.285448] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:56:40.712 2025] [ 1.301472] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:56:40.712 2025] [ 1.301852] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:40.732 2025] [ 1.301930] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:56:40.732 2025] [ 1.302103] devtmpfs: mounted [Fri Jan 03 13:56:40.744 2025] [ 1.303545] Freeing unused kernel memory: 1856K [Fri Jan 03 13:56:40.744 2025] [ 1.311152] Run /sbin/init as init process [Fri Jan 03 13:56:40.744 2025] [ 1.311156] with arguments: [Fri Jan 03 13:56:40.744 2025] [ 1.311158] /sbin/init [Fri Jan 03 13:56:40.744 2025] [ 1.311159] with environment: [Fri Jan 03 13:56:40.759 2025] [ 1.311161] HOME=/ [Fri Jan 03 13:56:40.759 2025] [ 1.311163] TERM=linux [Fri Jan 03 13:56:40.759 2025] [ 1.311164] syntec_extend= [Fri Jan 03 13:56:40.759 2025] [ 1.402658] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:56:40.775 2025] [ 1.429371] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:56:40.775 2025] [ 1.430544] Segment Routing with IPv6 [Fri Jan 03 13:56:40.775 2025] [ 1.430580] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:56:40.775 2025] [ 1.504156] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:56:40.806 2025] [ 1.504770] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:56:40.822 2025] [ 1.508095] systemd[1]: Hostname set to . [Fri Jan 03 13:56:40.822 2025] [ 1.645740] systemd-sysv-generator[183]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:56:40.854 2025] [ 1.950621] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:56:40.869 2025] [ 1.953372] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:56:40.885 2025] [ 2.016571] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:56:40.885 2025] [ 2.019866] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:56:40.900 2025] [ 2.021436] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:56:40.900 2025] [ 2.021941] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:56:40.900 2025] [ 2.022296] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:56:40.916 2025] [ 2.022492] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:56:40.916 2025] [ 2.022862] systemd[1]: Reached target Path Units. [Fri Jan 03 13:56:40.933 2025] [ 2.022960] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:56:40.933 2025] [ 2.023017] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:56:40.933 2025] [ 2.023127] systemd[1]: Reached target Swaps. [Fri Jan 03 13:56:40.948 2025] [ 2.027320] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:56:40.948 2025] [ 2.027482] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:56:40.948 2025] [ 2.033700] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:56:40.963 2025] [ 2.034185] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:56:40.963 2025] [ 2.035000] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:56:40.979 2025] [ 2.035552] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:56:40.979 2025] [ 2.036148] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:56:40.979 2025] [ 2.036971] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:56:40.995 2025] [ 2.038398] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:56:40.995 2025] [ 2.038921] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:56:40.995 2025] [ 2.039423] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:56:41.010 2025] [ 2.070790] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:56:41.010 2025] [ 2.074873] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:56:41.026 2025] [ 2.079319] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:56:41.026 2025] [ 2.080055] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:56:41.042 2025] [ 2.081434] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:56:41.058 2025] [ 2.085660] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:56:41.058 2025] [ 2.091168] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:56:41.073 2025] [ 2.096836] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:56:41.073 2025] [ 2.104499] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:56:41.073 2025] [ 2.109638] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:56:41.089 2025] [ 2.115712] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:56:41.089 2025] [ 2.116335] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:56:41.104 2025] [ 2.118004] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:56:41.120 2025] [ 2.118034] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:56:41.120 2025] [ 2.122102] fuse: init (API version 7.37) [Fri Jan 03 13:56:41.120 2025] [ 2.122533] systemd[1]: Starting Journal Service... [Fri Jan 03 13:56:41.136 2025] [ 2.130241] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:56:41.136 2025] [ 2.134947] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:56:41.136 2025] [ 2.140396] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:56:41.152 2025] [ 2.149964] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:56:41.152 2025] [ 2.154936] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:56:41.167 2025] [ 2.166402] systemd[1]: Started RPC Bind. [Fri Jan 03 13:56:41.167 2025] [ 2.168977] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:56:41.167 2025] [ 2.175341] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:56:41.183 2025] [ 2.176225] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:56:41.183 2025] [ 2.176988] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:56:41.183 2025] [ 2.179275] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:56:41.199 2025] [ 2.182431] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:56:41.199 2025] [ 2.185307] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:56:41.214 2025] [ 2.187459] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:56:41.214 2025] [ 2.188700] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:56:41.214 2025] [ 2.190028] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:56:41.230 2025] [ 2.196483] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:56:41.233 2025] [ 2.197548] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:56:41.233 2025] [ 2.198315] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:56:41.246 2025] [ 2.199776] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:56:41.246 2025] [ 2.206337] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:56:41.246 2025] [ 2.213000] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:56:41.261 2025] [ 2.228919] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:56:41.261 2025] [ 2.233239] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:56:41.277 2025] [ 2.238221] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:56:41.277 2025] [ 2.252330] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:56:41.277 2025] [ 2.255421] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:56:41.293 2025] [ 2.259310] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:56:41.293 2025] [ 2.260040] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:56:41.293 2025] [ 2.267832] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:56:41.308 2025] [ 2.268371] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:56:41.324 2025] [ 2.268785] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:56:41.340 2025] [ 2.272900] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:56:41.340 2025] [ 2.306206] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:56:41.356 2025] [ 2.327165] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 13:56:41.356 2025] [ 2.327731] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 13:56:41.371 2025] [ 2.348980] systemd[1]: Mounting /media/ram... [Fri Jan 03 13:56:41.371 2025] [ 2.354544] systemd[1]: Mounting /var/volatile... [Fri Jan 03 13:56:41.371 2025] [ 2.359429] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 13:56:41.387 2025] [ 2.364747] systemd[1]: Started Journal Service. [Fri Jan 03 13:56:41.387 2025] [ 2.420997] systemd-journald[193]: Received client request to flush runtime journal. [Fri Jan 03 13:56:41.639 2025] [ 2.797124] random: crng init done [Fri Jan 03 13:56:41.749 2025] [ 2.906317] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:56:41.764 2025] [ 2.906339] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:56:41.769 2025] [ 2.906363] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:56:41.782 2025] [ 2.906397] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:56:41.793 2025] [ 2.906420] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:56:41.821 2025] [ 2.979316] mc: Linux media interface: v0.10 [Fri Jan 03 13:56:41.834 2025] [ 2.980670] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:56:41.901 2025] [ 2.980692] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:56:41.913 2025] [ 2.980722] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:56:41.939 2025] [ 2.980745] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:56:41.960 2025] [ 2.980756] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:56:41.988 2025] [ 2.980762] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:56:42.001 2025] [ 2.980774] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:56:42.030 2025] [ 2.980786] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:56:42.047 2025] [ 2.980794] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:56:42.053 2025] [ 2.980798] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:56:42.060 2025] [ 2.980808] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:56:42.077 2025] [ 2.980819] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:56:42.087 2025] [ 2.996810] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:56:42.093 2025] [ 3.001469] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:56:42.099 2025] [ 3.002599] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:26:59 UTC (1681064819) [Fri Jan 03 13:56:42.126 2025] [ 3.011794] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:56:42.186 2025] [ 3.011821] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:56:42.222 2025] [ 3.019391] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:56:42.246 2025] [ 3.019420] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:56:42.261 2025] [ 3.024579] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:56:42.271 2025] [ 3.024599] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:56:42.273 2025] [ 3.024636] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:56:42.278 2025] [ 3.024639] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:56:42.301 2025] [ 3.024674] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:42.322 2025] [ 3.094601] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:56:42.347 2025] [ 3.095198] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:56:42.353 2025] [ 3.097860] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:56:42.365 2025] [ 3.099721] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:56:42.370 2025] [ 3.103493] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:56:42.379 2025] [ 3.103525] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:56:42.385 2025] [ 3.103561] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:56:42.394 2025] [ 3.103573] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:56:42.404 2025] [ 3.125742] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:56:42.412 2025] [ 3.125785] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:56:42.416 2025] [ 3.125791] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:56:42.423 2025] [ 3.125813] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:56:42.433 2025] [ 3.125841] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:56:42.444 2025] [ 3.125860] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:56:42.451 2025] [ 3.125866] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:56:42.457 2025] [ 3.290093] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:56:42.467 2025] [ 3.302782] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:56:42.480 2025] [ 3.302946] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:56:42.488 2025] [ 3.303177] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:56:42.494 2025] [ 3.303586] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:56:42.500 2025] [ 3.303664] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:56:42.506 2025] [ 3.343544] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:56:42.514 2025] [ 3.343583] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:56:42.523 2025] [ 3.344467] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:56:42.528 2025] [ 3.344509] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:56:42.536 2025] [ 3.344516] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:56:42.544 2025] [ 3.344846] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:56:42.551 2025] [ 3.344952] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:56:42.560 2025] [ 3.372571] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:56:42.565 2025] [ 3.373287] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:56:42.575 2025] [ 3.373314] Get kick_gpio number= (418) [Fri Jan 03 13:56:43.090 2025] [ 4.248221] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:56:43.206 2025] [ 4.362935] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:56:43.215 2025] [ 4.372499] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:56:43.225 2025] [ 4.372545] cfg80211: failed to load regulatory.db [Fri Jan 03 13:56:43.428 2025] [ 4.585960] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:56:43.437 2025] [ 4.585997] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:56:43.645 2025] [ 4.812149] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:56:43.645 2025] [ 4.818123] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:56:43.708 2025] [ 4.869811] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:56:43.708 2025] [ 4.869838] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:56:43.723 2025] [ 4.869861] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:56:43.740 2025] [ 4.869894] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:56:43.755 2025] [ 4.869910] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:56:43.755 2025] [ 4.869915] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:56:43.802 2025] [ 4.877315] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:56:43.975 2025] [ 5.131596] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:56:44.053 2025] [ 5.220643] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:56:44.069 2025] [ 5.220694] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:56:44.100 2025] [ 5.220902] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:56:44.116 2025] [ 5.220912] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:56:44.139 2025] [ 5.234192] xhci-hcd xhci-hcd.4.auto: irq 467, io mem 0x31100000 [Fri Jan 03 13:56:44.148 2025] [ 5.235721] hub 1-0:1.0: USB hub found [Fri Jan 03 13:56:44.148 2025] [ 5.235800] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:56:44.258 2025] [ 5.428096] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:56:44.273 2025] [ 5.428139] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:44.305 2025] [ 5.477166] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:56:44.384 2025] [ 5.543182] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:56:44.384 2025] [ 5.543234] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:44.440 2025] [ 5.600647] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:56:44.446 2025] [ 5.600697] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:44.493 2025] [ 5.650988] hub 1-1:1.0: USB hub found [Fri Jan 03 13:56:44.493 2025] [ 5.651327] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:56:44.572 2025] [ 5.741175] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:56:44.619 2025] [ 5.780333] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:56:44.619 2025] [ 5.780376] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:56:44.776 2025] [ 5.934671] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:56:44.841 2025] [ 6.002865] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:56:44.841 2025] [ 6.003443] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:45.106 2025] *************************************************************** [Fri Jan 03 13:56:45.122 2025] *************************************************************** [Fri Jan 03 13:56:45.122 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:56:45.122 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:56:45.137 2025] bash [Fri Jan 03 13:56:45.137 2025] cifs-utils [Fri Jan 03 13:56:45.137 2025] dosfstools [Fri Jan 03 13:56:45.137 2025] grub-common [Fri Jan 03 13:56:45.137 2025] grub-editenv [Fri Jan 03 13:56:45.142 2025] grub-efi [Fri Jan 03 13:56:45.142 2025] less [Fri Jan 03 13:56:45.142 2025] lib32-libgcc1 [Fri Jan 03 13:56:45.142 2025] lib32-libstdc++6 [Fri Jan 03 13:56:45.142 2025] libdw1 [Fri Jan 03 13:56:45.142 2025] libelf1 [Fri Jan 03 13:56:45.142 2025] libgcc1 [Fri Jan 03 13:56:45.142 2025] libgdbm-compat4 [Fri Jan 03 13:56:45.142 2025] libgdbm6 [Fri Jan 03 13:56:45.142 2025] libgmp10 [Fri Jan 03 13:56:45.142 2025] libidn2-0 [Fri Jan 03 13:56:45.153 2025] libreadline8 [Fri Jan 03 13:56:45.153 2025] libstdc++6 [Fri Jan 03 13:56:45.153 2025] libunistring2 [Fri Jan 03 13:56:45.153 2025] libvte-2.91-0 [Fri Jan 03 13:56:45.153 2025] nettle [Fri Jan 03 13:56:45.153 2025] onboard [Fri Jan 03 13:56:45.153 2025] parted [Fri Jan 03 13:56:45.153 2025] rxvt-unicode [Fri Jan 03 13:56:45.153 2025] [Fri Jan 03 13:56:45.153 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:56:45.153 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:56:45.169 2025] the opkg remove command. i.e.: [Fri Jan 03 13:56:45.169 2025] opkg remove [Fri Jan 03 13:56:45.169 2025] Where is the name printed in the list above [Fri Jan 03 13:56:45.169 2025] [Fri Jan 03 13:56:45.169 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:56:45.185 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:56:45.185 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:56:45.200 2025] also remove the dependent packages as well [Fri Jan 03 13:56:45.200 2025] *************************************************************** [Fri Jan 03 13:56:45.200 2025] *************************************************************** [Fri Jan 03 13:56:45.263 2025] [ 6.429437] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:56:45.263 2025] [ 6.430647] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:56:50.220 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:56:50.227 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:56:50.410 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:56:50.417 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:56:50.591 2025] [ 11.749236] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:50.598 2025] [ 11.749264] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:50.605 2025] [ 11.749284] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.609 2025] [ 11.749339] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:50.615 2025] [ 11.749344] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:50.621 2025] [ 11.749352] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.628 2025] [ 11.749388] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:50.635 2025] [ 11.749394] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:50.639 2025] [ 11.749404] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.646 2025] [ 11.749439] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:50.652 2025] [ 11.749445] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:50.659 2025] [ 11.749451] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.665 2025] [ 11.749493] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:50.672 2025] [ 11.749499] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:50.677 2025] [ 11.749506] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.683 2025] [ 11.749547] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:50.689 2025] [ 11.749552] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:50.695 2025] [ 11.749560] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.702 2025] [ 11.749594] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:50.707 2025] [ 11.749600] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:50.714 2025] [ 11.749606] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.722 2025] [ 11.749640] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:50.729 2025] [ 11.749645] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:50.735 2025] [ 11.749653] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:50.757 2025] [Fri Jan 03 13:56:50.757 2025] _____ _____ _ _ [Fri Jan 03 13:56:50.762 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:56:50.766 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:56:50.771 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:56:50.777 2025] |___| |___| [Fri Jan 03 13:56:50.782 2025] [Fri Jan 03 13:56:50.783 2025] Arago Project am62xx-evm - [Fri Jan 03 13:56:50.785 2025] [Fri Jan 03 13:56:50.785 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:56:50.787 2025] [Fri Jan 03 13:56:50.787 2025] am62xx-evm login: [ 14.069368] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:52.905 2025] [ 14.069394] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:52.920 2025] [ 14.069409] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:52.920 2025] [ 14.069459] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:52.920 2025] [ 14.069464] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:52.936 2025] [ 14.069470] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:52.936 2025] [ 14.069504] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:52.951 2025] [ 14.069509] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:52.951 2025] [ 14.069516] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:52.963 2025] [ 14.069549] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:52.967 2025] [ 14.069554] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:52.967 2025] [ 14.069561] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:52.983 2025] [ 14.069594] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:52.983 2025] [ 14.069601] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:52.983 2025] [ 14.069608] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:52.999 2025] [ 14.069642] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:52.999 2025] [ 14.069647] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:52.999 2025] [ 14.069654] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:53.015 2025] [ 14.069690] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:53.015 2025] [ 14.069695] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:53.030 2025] [ 14.069703] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:53.030 2025] [ 14.069736] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:53.030 2025] [ 14.069743] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:53.046 2025] [ 14.069751] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:53.393 2025] [ 14.557539] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:56:56.690 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:56:56.693 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:56:58.490 2025] [ 19.647290] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:58.495 2025] [ 19.647323] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:58.501 2025] [ 19.647344] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.507 2025] [ 19.647399] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:58.513 2025] [ 19.647405] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:58.519 2025] [ 19.647412] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.526 2025] [ 19.647447] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:58.532 2025] [ 19.647453] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:58.538 2025] [ 19.647460] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.544 2025] [ 19.647496] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:58.550 2025] [ 19.647501] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:58.556 2025] [ 19.647508] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.562 2025] [ 19.647546] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:58.568 2025] [ 19.647551] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:58.575 2025] [ 19.647560] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.581 2025] [ 19.647594] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:58.588 2025] [ 19.647599] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:58.593 2025] [ 19.647606] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.599 2025] [ 19.647643] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:58.605 2025] [ 19.647648] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:58.611 2025] [ 19.647656] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.617 2025] [ 19.647694] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:58.624 2025] [ 19.647699] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:58.631 2025] [ 19.647706] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.637 2025] [ 19.730225] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:56:58.643 2025] [ 19.730251] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:56:58.649 2025] [ 19.730275] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.656 2025] [ 19.730341] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:56:58.661 2025] [ 19.730346] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:56:58.667 2025] [ 19.730353] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.674 2025] [ 19.730389] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:56:58.680 2025] [ 19.730394] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:56:58.686 2025] [ 19.730405] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.692 2025] [ 19.730441] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:56:58.698 2025] [ 19.730446] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:56:58.705 2025] [ 19.730453] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.710 2025] [ 19.730488] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:56:58.716 2025] [ 19.730494] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:56:58.722 2025] [ 19.730501] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.728 2025] [ 19.730534] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:56:58.735 2025] [ 19.730540] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:56:58.741 2025] [ 19.730550] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.747 2025] [ 19.730584] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:56:58.753 2025] [ 19.730589] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:56:58.759 2025] [ 19.730595] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:56:58.765 2025] [ 19.730634] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:56:58.771 2025] [ 19.730642] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:56:58.777 2025] [ 19.730648] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:31.203 2025] [Fri Jan 03 13:57:31.203 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:57:31.223 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:57:31.273 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:57:31.294 2025] Trying to boot from MMC1 [Fri Jan 03 13:57:31.459 2025] Authentication passed [Fri Jan 03 13:57:31.465 2025] Authentication passed [Fri Jan 03 13:57:31.470 2025] Authentication passed [Fri Jan 03 13:57:31.507 2025] Authentication passed [Fri Jan 03 13:57:31.513 2025] Authentication passed [Fri Jan 03 13:57:31.517 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:57:31.519 2025] [Fri Jan 03 13:57:31.522 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:57:31.528 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:57:31.826 2025] [Fri Jan 03 13:57:31.826 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:57:31.833 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:57:31.874 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:57:31.878 2025] Error: could not access storage. [Fri Jan 03 13:57:31.881 2025] Trying to boot from MMC1 [Fri Jan 03 13:57:32.041 2025] Authentication passed [Fri Jan 03 13:57:32.048 2025] Authentication passed [Fri Jan 03 13:57:32.700 2025] [Fri Jan 03 13:57:32.701 2025] [Fri Jan 03 13:57:32.701 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:57:32.705 2025] [Fri Jan 03 13:57:32.705 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:57:32.707 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:57:32.711 2025] DRAM: 2 GiB [Fri Jan 03 13:57:32.954 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:57:32.959 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:57:32.969 2025] Loading Environment from MMC... OK [Fri Jan 03 13:57:33.174 2025] In: serial [Fri Jan 03 13:57:33.176 2025] Out: serial [Fri Jan 03 13:57:33.177 2025] Err: serial [Fri Jan 03 13:57:33.177 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:57:33.179 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:57:33.340 2025] switch to partitions #0, OK [Fri Jan 03 13:57:33.342 2025] mmc0(part 0) is current device [Fri Jan 03 13:57:33.487 2025] SD/MMC found on device 0 [Fri Jan 03 13:57:33.489 2025] Running eMMC boot ... [Fri Jan 03 13:57:33.507 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 13:57:33.510 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:57:33.513 2025] Importing environment from mmc0 ... [Fri Jan 03 13:57:33.737 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:57:33.759 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:57:33.762 2025] Working FDT set to 88000000 [Fri Jan 03 13:57:33.765 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:57:33.769 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:57:33.773 2025] Working FDT set to 88000000 [Fri Jan 03 13:57:33.799 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:57:33.806 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:57:33.814 2025] Working FDT set to 8feed000 [Fri Jan 03 13:57:33.824 2025] [Fri Jan 03 13:57:33.824 2025] Starting kernel ... [Fri Jan 03 13:57:33.826 2025] [Fri Jan 03 13:57:33.862 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:57:33.869 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:57:33.886 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:57:33.891 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:57:33.987 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:57:33.989 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:57:33.992 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:57:34.000 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:57:34.007 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:57:34.015 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:57:34.025 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:57:34.033 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:57:34.042 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:57:34.050 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:57:34.059 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:57:34.067 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:57:34.078 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:57:34.085 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:57:34.094 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:57:34.097 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:57:34.103 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:57:34.106 2025] [ 0.000000] Normal empty [Fri Jan 03 13:57:34.109 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:57:34.113 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:57:34.117 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:57:34.123 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:57:34.130 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:57:34.136 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:57:34.142 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:57:34.150 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:57:34.155 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:57:34.162 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:57:34.169 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:57:34.174 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:57:34.180 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:57:34.184 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:57:34.189 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:57:34.193 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:57:34.200 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:57:34.206 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:57:34.211 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:57:34.215 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:57:34.221 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:57:34.230 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:57:34.235 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:57:34.240 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:57:34.248 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:57:34.295 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:57:34.304 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:57:34.312 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:57:34.320 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:57:34.326 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:57:34.341 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:57:34.347 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:57:34.353 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:57:34.360 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:57:34.366 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:57:34.372 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:57:34.380 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:57:34.387 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:57:34.392 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:57:34.398 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:57:34.402 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:57:34.406 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:57:34.411 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:57:34.415 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:57:34.422 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:57:34.426 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:57:34.433 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:57:34.440 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:57:34.451 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:57:34.455 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:57:34.461 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:57:34.467 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:57:34.474 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:57:34.482 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:57:34.488 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:57:34.498 2025] [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:57:34.507 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 13:57:34.513 2025] [ 0.528903] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:57:34.524 2025] [ 0.528913] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:57:34.529 2025] [ 0.528998] LSM: Security Framework initializing [Fri Jan 03 13:57:34.533 2025] [ 0.529133] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:57:34.541 2025] [ 0.529156] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:57:34.549 2025] [ 0.530857] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:57:34.554 2025] [ 0.530865] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:57:34.559 2025] [ 0.530909] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:57:34.566 2025] [ 0.583372] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:57:34.573 2025] [ 0.583619] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:57:34.582 2025] [ 0.583702] EFI services will not be available. [Fri Jan 03 13:57:34.587 2025] [ 0.583957] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:57:34.592 2025] [ 0.584729] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:57:34.596 2025] [ 0.584844] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:57:34.603 2025] [ 0.584861] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:57:34.610 2025] [ 0.584916] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:57:34.617 2025] [ 0.634994] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:57:34.622 2025] [ 0.635074] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:57:34.629 2025] [ 0.635087] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:57:34.636 2025] [ 0.635119] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:57:34.643 2025] [ 0.660993] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:57:34.648 2025] [ 0.661075] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:57:34.656 2025] [ 0.661087] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:57:34.662 2025] [ 0.661118] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:57:34.669 2025] [ 0.661174] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:57:34.673 2025] [ 0.661180] SMP: Total of 4 processors activated. [Fri Jan 03 13:57:34.679 2025] [ 0.695378] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:57:34.685 2025] [ 0.695381] CPU features: detected: CRC32 instructions [Fri Jan 03 13:57:34.689 2025] [ 0.695428] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:57:34.693 2025] [ 0.695430] alternatives: applying system-wide alternatives [Fri Jan 03 13:57:34.699 2025] [ 0.696910] devtmpfs: initialized [Fri Jan 03 13:57:34.702 2025] [ 0.708523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:57:34.712 2025] [ 0.708550] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:57:34.719 2025] [ 0.713690] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:57:34.725 2025] [ 0.714501] DMI not present or invalid. [Fri Jan 03 13:57:34.729 2025] [ 0.715035] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:57:34.735 2025] [ 0.729176] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:57:34.742 2025] [ 0.729461] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:57:34.751 2025] [ 0.729655] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:57:34.758 2025] [ 0.729801] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:57:34.763 2025] [ 0.729995] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:57:34.771 2025] [ 0.730627] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:57:34.777 2025] [ 0.730632] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:57:34.784 2025] [ 0.730874] ASID allocator initialised with 65536 entries [Fri Jan 03 13:57:34.790 2025] [ 0.745789] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:57:34.797 2025] [ 0.754932] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:57:34.804 2025] [ 0.754941] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:57:34.810 2025] [ 0.754946] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:57:34.817 2025] [ 0.754949] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:57:34.823 2025] [ 0.754952] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:57:34.830 2025] [ 0.754955] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:57:34.837 2025] [ 0.754958] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:57:34.844 2025] [ 0.754961] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:57:34.850 2025] [ 0.756109] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:57:34.859 2025] [ 0.756626] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:57:34.866 2025] [ 0.756633] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:57:34.873 2025] [ 0.756645] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:57:34.883 2025] [ 0.756662] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:57:34.891 2025] [ 0.756673] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:57:34.898 2025] [ 0.756679] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:57:34.905 2025] [ 0.756903] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:57:34.912 2025] [ 0.756908] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:57:34.919 2025] [ 0.756917] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:57:34.928 2025] [ 0.756930] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:57:34.937 2025] [ 0.756939] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:57:34.944 2025] [ 0.756943] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:57:34.951 2025] [ 0.757192] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:57:34.958 2025] [ 0.757197] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:57:34.965 2025] [ 0.757210] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:57:34.974 2025] [ 0.757223] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:57:34.983 2025] [ 1.0[00529] printk: console [ttyS2] printing thread started [Fri Jan 03 13:57:34.989 2025] 0.757231] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:57:34.996 2025] [ 1.000545] printk: console [ttyS2] enabled [Fri Jan 03 13:57:35.001 2025] [ 1.000548] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:57:35.006 2025] [ 1.013487] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:57:35.012 2025] [ 1.014675] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:57:35.019 2025] [ 1.014685] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:57:35.025 2025] [ 1.014698] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:57:35.036 2025] [ 1.014716] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:57:35.047 2025] [ 1.014728] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.053 2025] [ 1.014733] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:57:35.059 2025] [ 1.014761] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:57:35.068 2025] [ 1.015726] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:57:35.074 2025] [ 1.015734] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:57:35.081 2025] [ 1.015746] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:57:35.090 2025] [ 1.015761] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:57:35.098 2025] [ 1.015771] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.104 2025] [ 1.015775] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:57:35.112 2025] [ 1.019552] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:57:35.119 2025] [ 1.025622] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:57:35.125 2025] [ 1.032250] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:57:35.132 2025] [ 1.032687] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:57:35.138 2025] [ 1.032695] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:57:35.144 2025] [ 1.032712] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:57:35.155 2025] [ 1.032730] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:57:35.166 2025] [ 1.032744] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.173 2025] [ 1.032749] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:57:35.179 2025] [ 1.066081] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:57:35.186 2025] [ 1.066377] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:57:35.193 2025] [ 1.067190] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:57:35.199 2025] [ 1.067198] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:57:35.208 2025] [ 1.067209] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:57:35.218 2025] [ 1.067233] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:57:35.230 2025] [ 1.067246] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.237 2025] [ 1.067251] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:57:35.243 2025] [ 1.068006] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:57:35.251 2025] [ 1.068079] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:57:35.264 2025] [ 1.068326] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:57:35.270 2025] [ 1.068339] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:57:35.278 2025] [ 1.068347] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:57:35.283 2025] [ 1.069158] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:57:35.292 2025] [ 1.085620] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:57:35.299 2025] [ 1.090535] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:57:35.305 2025] [ 1.090549] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:57:35.311 2025] [ 1.090566] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:57:35.321 2025] [ 1.090595] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:57:35.330 2025] [ 1.090607] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.337 2025] [ 1.090612] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:57:35.343 2025] [ 1.090618] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:57:35.349 2025] [ 1.090621] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:57:35.355 2025] [ 1.090633] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:57:35.365 2025] [ 1.090646] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:57:35.374 2025] [ 1.090655] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.382 2025] [ 1.090659] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:57:35.387 2025] [ 1.091251] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:57:35.397 2025] [ 1.091263] mmc1: CQHCI version 5.10 [Fri Jan 03 13:57:35.401 2025] [ 1.091568] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:57:35.407 2025] [ 1.091575] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:57:35.414 2025] [ 1.091586] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:57:35.423 2025] [ 1.091614] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:57:35.433 2025] [ 1.091624] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.439 2025] [ 1.091628] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:57:35.445 2025] [ 1.092661] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:57:35.451 2025] [ 1.092675] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:57:35.458 2025] [ 1.092694] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:57:35.467 2025] [ 1.092710] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:57:35.478 2025] [ 1.092720] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.485 2025] [ 1.092725] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:57:35.490 2025] [ 1.093468] mmc2: CQHCI version 5.10 [Fri Jan 03 13:57:35.493 2025] [ 1.093574] mmc0: CQHCI version 5.10 [Fri Jan 03 13:57:35.497 2025] [ 1.094582] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:57:35.506 2025] [ 1.097149] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:57:35.516 2025] [ 1.100125] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:57:35.521 2025] [ 1.100319] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:57:35.539 2025] [ 1.100385] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:57:35.551 2025] [ 1.103529] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:57:35.556 2025] [ 1.103743] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:57:35.562 2025] [ 1.103807] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:57:35.569 2025] [ 1.105461] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:57:35.576 2025] [ 1.105470] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:57:35.583 2025] [ 1.105491] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:57:35.591 2025] [ 1.105507] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:57:35.597 2025] [ 1.105523] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:57:35.605 2025] [ 1.105528] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:57:35.611 2025] [ 1.105537] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:57:35.620 2025] [ 1.105548] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:57:35.630 2025] [ 1.105558] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:57:35.637 2025] [ 1.105562] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:57:35.643 2025] [ 1.106008] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:57:35.650 2025] [ 1.106013] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:57:35.656 2025] [ 1.106029] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:57:35.664 2025] [ 1.106039] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:57:35.670 2025] [ 1.106043] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:57:35.677 2025] [ 1.106560] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:57:35.685 2025] [ 1.106573] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:57:35.691 2025] [ 1.106576] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:57:35.696 2025] [ 1.106667] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:57:35.705 2025] [ 1.106679] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:57:35.711 2025] [ 1.106682] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:57:35.716 2025] [ 1.106745] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:57:35.727 2025] [ 1.106755] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:57:35.732 2025] [ 1.106758] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:57:35.737 2025] [ 1.107435] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:57:35.744 2025] [ 1.110076] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:57:35.751 2025] [ 1.122373] ALSA device list: [Fri Jan 03 13:57:35.754 2025] [ 1.122385] No soundcards found. [Fri Jan 03 13:57:35.758 2025] [ 1.128351] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:57:35.765 2025] [ 1.133312] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:57:35.773 2025] [ 1.140819] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:57:35.780 2025] [ 1.140983] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:57:35.788 2025] [ 1.186896] mmc1: new MMC card at address 0001 [Fri Jan 03 13:57:35.792 2025] [ 1.187721] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:57:35.797 2025] [ 1.195638] mmcblk1: p1 [Fri Jan 03 13:57:35.799 2025] [ 1.196502] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:57:35.804 2025] [ 1.198172] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:57:35.809 2025] [ 1.199552] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:57:35.815 2025] [ 1.281896] mmc0: Command Queue Engine enabled [Fri Jan 03 13:57:35.820 2025] [ 1.281916] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:57:35.825 2025] [ 1.282717] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:57:35.829 2025] [ 1.286724] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:57:35.833 2025] [ 1.287889] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:57:35.838 2025] [ 1.289372] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:57:35.843 2025] [ 1.290632] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:57:35.849 2025] [ 1.315289] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:57:35.854 2025] [ 1.315752] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:35.863 2025] [ 1.315834] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:57:35.869 2025] [ 1.316065] devtmpfs: mounted [Fri Jan 03 13:57:35.872 2025] [ 1.317458] Freeing unused kernel memory: 1856K [Fri Jan 03 13:57:35.877 2025] [ 1.317572] Run /sbin/init as init process [Fri Jan 03 13:57:35.880 2025] [ 1.317575] with arguments: [Fri Jan 03 13:57:35.883 2025] [ 1.317577] /sbin/init [Fri Jan 03 13:57:35.886 2025] [ 1.317579] with environment: [Fri Jan 03 13:57:35.889 2025] [ 1.317580] HOME=/ [Fri Jan 03 13:57:35.891 2025] [ 1.317582] TERM=linux [Fri Jan 03 13:57:35.894 2025] [ 1.317583] syntec_extend= [Fri Jan 03 13:57:35.897 2025] [ 1.408615] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:57:35.904 2025] [ 1.434920] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:57:35.909 2025] [ 1.436105] Segment Routing with IPv6 [Fri Jan 03 13:57:35.913 2025] [ 1.436138] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:57:35.916 2025] [ 1.475496] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:57:35.948 2025] [ 1.476042] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:57:35.953 2025] [ 1.479509] systemd[1]: Hostname set to . [Fri Jan 03 13:57:35.958 2025] [ 1.594865] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:57:35.983 2025] [ 1.891665] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:57:35.998 2025] [ 1.894395] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:57:36.017 2025] [ 1.957272] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:57:36.025 2025] [ 1.960616] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:57:36.031 2025] [ 1.962210] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:57:36.037 2025] [ 1.962689] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:57:36.042 2025] [ 1.963026] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:57:36.051 2025] [ 1.963254] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:57:36.058 2025] [ 1.963627] systemd[1]: Reached target Path Units. [Fri Jan 03 13:57:36.063 2025] [ 1.963723] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:57:36.069 2025] [ 1.963789] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:57:36.074 2025] [ 1.963880] systemd[1]: Reached target Swaps. [Fri Jan 03 13:57:36.078 2025] [ 1.968191] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:57:36.085 2025] [ 1.968383] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:57:36.090 2025] [ 1.974530] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:57:36.096 2025] [ 1.974975] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:57:36.103 2025] [ 1.975924] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:57:36.108 2025] [ 1.976531] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:57:36.114 2025] [ 1.977085] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:57:36.119 2025] [ 1.977848] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:57:36.126 2025] [ 1.979709] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:57:36.131 2025] [ 1.980272] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:57:36.137 2025] [ 1.980738] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:57:36.143 2025] [ 2.049803] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:57:36.148 2025] [ 2.053946] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:57:36.155 2025] [ 2.058738] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:57:36.160 2025] [ 2.059570] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:57:36.173 2025] [ 2.061336] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:57:36.198 2025] [ 2.065523] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:57:36.213 2025] [ 2.071526] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:57:36.219 2025] [ 2.076452] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:57:36.225 2025] [ 2.081383] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:57:36.230 2025] [ 2.086960] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:57:36.236 2025] [ 2.095204] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:57:36.239 2025] [ 2.095701] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:57:36.252 2025] [ 2.097415] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:57:36.265 2025] [ 2.097444] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:57:36.274 2025] [ 2.098855] fuse: init (API version 7.37) [Fri Jan 03 13:57:36.278 2025] [ 2.102108] systemd[1]: Starting Journal Service... [Fri Jan 03 13:57:36.283 2025] [ 2.112412] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:57:36.289 2025] [ 2.123627] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:57:36.296 2025] [ 2.129125] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:57:36.302 2025] [ 2.134180] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:57:36.308 2025] [ 2.137732] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:57:36.314 2025] [ 2.139694] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:57:36.320 2025] [ 2.146703] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:57:36.324 2025] [ 2.152582] systemd[1]: Started RPC Bind. [Fri Jan 03 13:57:36.328 2025] [ 2.153913] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:57:36.333 2025] [ 2.155001] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:57:36.339 2025] [ 2.155900] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:57:36.344 2025] [ 2.156775] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:57:36.350 2025] [ 2.158530] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:57:36.356 2025] [ 2.160411] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:57:36.363 2025] [ 2.161322] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:57:36.369 2025] [ 2.163035] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:57:36.376 2025] [ 2.163855] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:57:36.381 2025] [ 2.165718] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:57:36.388 2025] [ 2.166653] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:57:36.393 2025] [ 2.168665] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:57:36.398 2025] [ 2.195122] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:57:36.404 2025] [ 2.202800] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:57:36.411 2025] [ 2.221498] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:57:36.416 2025] [ 2.222228] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:57:36.422 2025] [ 2.242721] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:57:36.430 2025] [ 2.244381] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:57:36.436 2025] [ 2.245680] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:57:36.441 2025] [ 2.246586] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:57:36.447 2025] [ 2.247246] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:57:36.453 2025] [ 2.252732] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:57:36.464 2025] [ 2.253041] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:57:36.479 2025] [ 2.253669] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:57:36.489 2025] [ 2.284411] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:57:36.496 2025] [ 2.290236] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 13:57:36.501 2025] [ 2.296124] systemd[1]: Started Journal Service. [Fri Jan 03 13:57:36.506 2025] [ 2.332658] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 13:57:36.771 2025] [ 2.786157] random: crng init done [Fri Jan 03 13:57:36.804 2025] [ 2.819805] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:57:36.820 2025] [ 2.819826] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:57:36.832 2025] [ 2.819842] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:57:36.873 2025] [ 2.819880] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:57:36.890 2025] [ 2.819905] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:57:36.897 2025] [ 2.844100] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:57:36.922 2025] [ 2.844120] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:57:36.943 2025] [ 2.844161] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:57:37.015 2025] [ 2.844187] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:57:37.024 2025] [ 2.844202] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:57:37.032 2025] [ 2.844206] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:57:37.046 2025] [ 2.844217] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:57:37.075 2025] [ 2.844229] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:57:37.083 2025] [ 2.844248] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:57:37.089 2025] [ 2.844253] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:57:37.097 2025] [ 2.844264] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:57:37.109 2025] [ 2.844275] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:57:37.115 2025] [ 2.847552] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:57:37.120 2025] [ 2.847573] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:57:37.126 2025] [ 2.847602] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:57:37.132 2025] [ 2.847604] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:57:37.142 2025] [ 2.847632] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:57:37.148 2025] [ 2.856406] mc: Linux media interface: v0.10 [Fri Jan 03 13:57:37.153 2025] [ 2.951674] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:57:37.158 2025] [ 2.954172] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:27:54 UTC (1681064874) [Fri Jan 03 13:57:37.166 2025] [ 2.956348] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:57:37.184 2025] [ 2.956379] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:57:37.198 2025] [ 2.970767] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:57:37.204 2025] [ 3.001462] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:57:37.212 2025] [ 3.006690] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:57:37.219 2025] [ 3.006776] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:57:37.227 2025] [ 3.012666] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:57:37.232 2025] [ 3.013668] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:57:37.249 2025] [ 3.013698] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:57:37.256 2025] [ 3.013734] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:57:37.273 2025] [ 3.013741] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:57:37.278 2025] [ 3.197479] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:57:37.291 2025] [ 3.197631] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:57:37.297 2025] [ 3.197838] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:57:37.306 2025] [ 3.198319] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:57:37.311 2025] [ 3.198417] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:57:37.321 2025] [ 3.201985] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:57:37.329 2025] [ 3.202024] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:57:37.339 2025] [ 3.202935] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:57:37.344 2025] [ 3.202968] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 13:57:37.351 2025] [ 3.202974] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:57:37.359 2025] [ 3.203151] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:57:37.367 2025] [ 3.203343] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:57:37.375 2025] [ 3.215281] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:57:37.381 2025] [ 3.215306] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:57:37.386 2025] [ 3.215314] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:57:37.393 2025] [ 3.215329] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:57:37.409 2025] [ 3.215354] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:57:37.420 2025] [ 3.215370] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:57:37.426 2025] [ 3.215375] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:57:37.436 2025] [ 3.248114] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:57:37.453 2025] [ 3.364423] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:57:37.457 2025] [ 3.365033] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:57:37.468 2025] [ 3.365785] Get kick_gpio number= (418) [Fri Jan 03 13:57:38.042 2025] [ 4.059549] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:57:38.054 2025] [ 4.059574] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:57:38.071 2025] [ 4.059591] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:57:38.129 2025] [ 4.078149] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:57:38.161 2025] [ 4.078209] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:57:38.173 2025] [ 4.078216] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:57:38.194 2025] [ 4.081747] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:57:38.224 2025] [ 4.099017] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:57:38.258 2025] [ 4.102683] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:57:38.298 2025] [ 4.312828] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:57:38.322 2025] [ 4.336727] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:57:38.327 2025] [ 4.336792] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:57:38.394 2025] [ 4.337010] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:57:38.419 2025] [ 4.337022] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:57:38.453 2025] [ 4.365114] xhci-hcd xhci-hcd.4.auto: irq 467, io mem 0x31100000 [Fri Jan 03 13:57:38.469 2025] [ 4.368311] hub 1-0:1.0: USB hub found [Fri Jan 03 13:57:38.473 2025] [ 4.368395] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:57:38.592 2025] [ 4.605157] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:57:38.768 2025] [ 4.783153] hub 1-1:1.0: USB hub found [Fri Jan 03 13:57:38.773 2025] [ 4.783415] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:57:38.853 2025] [ 4.869613] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:57:38.880 2025] [ 4.896568] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:57:38.887 2025] [ 4.899515] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:57:38.897 2025] [ 4.899554] cfg80211: failed to load regulatory.db [Fri Jan 03 13:57:39.013 2025] [ 5.027912] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:57:39.022 2025] [ 5.027949] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:57:39.254 2025] [ 5.266872] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:57:39.256 2025] [ 5.266907] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:39.304 2025] [ 5.320255] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:57:39.309 2025] [ 5.320294] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:39.506 2025] [ 5.522484] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:57:39.512 2025] [ 5.522535] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:39.525 2025] [ 5.541561] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:57:39.610 2025] [ 5.625041] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:57:39.614 2025] [ 5.625897] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:39.718 2025] [ 5.731012] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:57:39.762 2025] [ 5.779000] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:57:39.778 2025] [ 5.779036] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:57:40.361 2025] *************************************************************** [Fri Jan 03 13:57:40.367 2025] *************************************************************** [Fri Jan 03 13:57:40.372 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:57:40.378 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:57:40.381 2025] bash [Fri Jan 03 13:57:40.381 2025] cifs-utils [Fri Jan 03 13:57:40.382 2025] dosfstools [Fri Jan 03 13:57:40.383 2025] grub-common [Fri Jan 03 13:57:40.384 2025] grub-editenv [Fri Jan 03 13:57:40.385 2025] grub-efi [Fri Jan 03 13:57:40.386 2025] less [Fri Jan 03 13:57:40.387 2025] lib32-libgcc1 [Fri Jan 03 13:57:40.388 2025] lib32-libstdc++6 [Fri Jan 03 13:57:40.390 2025] libdw1 [Fri Jan 03 13:57:40.391 2025] libelf1 [Fri Jan 03 13:57:40.392 2025] libgcc1 [Fri Jan 03 13:57:40.393 2025] libgdbm-compat4 [Fri Jan 03 13:57:40.394 2025] libgdbm6 [Fri Jan 03 13:57:40.395 2025] libgmp10 [Fri Jan 03 13:57:40.396 2025] libidn2-0 [Fri Jan 03 13:57:40.397 2025] libreadline8 [Fri Jan 03 13:57:40.398 2025] libstdc++6 [Fri Jan 03 13:57:40.400 2025] libunistring2 [Fri Jan 03 13:57:40.401 2025] libvte-2.91-0 [Fri Jan 03 13:57:40.402 2025] nettle [Fri Jan 03 13:57:40.403 2025] onboard [Fri Jan 03 13:57:40.404 2025] parted [Fri Jan 03 13:57:40.405 2025] rxvt-unicode [Fri Jan 03 13:57:40.406 2025] [Fri Jan 03 13:57:40.406 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:57:40.412 2025] the above packages prior to distribution. Th[ 6.428482] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:57:40.421 2025] is can be done using [Fri Jan 03 13:57:40.423 2025] the opkg remove command. i.e.: [Fri Jan 03 13:57:40.426 2025] opkg [ 6.434987] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:57:40.435 2025] remove [Fri Jan 03 13:57:40.436 2025] Where is the name printed in the list above [Fri Jan 03 13:57:40.441 2025] [Fri Jan 03 13:57:40.441 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:57:40.447 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:57:40.452 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:57:40.458 2025] also remove the dependent packages as well [Fri Jan 03 13:57:40.462 2025] *************************************************************** [Fri Jan 03 13:57:40.468 2025] *************************************************************** [Fri Jan 03 13:57:45.634 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:57:45.640 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:57:45.729 2025] [Fri Jan 03 13:57:45.729 2025] _____ _____ _ _ [Fri Jan 03 13:57:45.734 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:57:45.739 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:57:45.744 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:57:45.749 2025] |___| |___| [Fri Jan 03 13:57:45.755 2025] [Fri Jan 03 13:57:45.755 2025] Arago Project am62xx-evm - [Fri Jan 03 13:57:45.757 2025] [Fri Jan 03 13:57:45.757 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:57:45.759 2025] [Fri Jan 03 13:57:45.759 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:57:45.837 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:57:46.013 2025] [ 12.029857] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:57:46.019 2025] [ 12.029882] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:57:46.025 2025] [ 12.029907] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.032 2025] [ 12.029961] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:57:46.038 2025] [ 12.029968] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:57:46.044 2025] [ 12.029978] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.050 2025] [ 12.030013] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:57:46.056 2025] [ 12.030018] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:57:46.062 2025] [ 12.030024] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.068 2025] [ 12.030209] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:57:46.074 2025] [ 12.030217] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:57:46.079 2025] [ 12.030227] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.086 2025] [ 12.030280] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:57:46.093 2025] [ 12.030285] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:57:46.099 2025] [ 12.030293] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.104 2025] [ 12.030328] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:57:46.110 2025] [ 12.030336] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:57:46.116 2025] [ 12.030343] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.123 2025] [ 12.030378] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:57:46.130 2025] [ 12.030383] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:57:46.135 2025] [ 12.030389] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:46.143 2025] [ 12.030426] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:57:46.147 2025] [ 12.030431] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:57:46.154 2025] [ 12.030438] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.307 2025] [ 14.331284] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:57:48.322 2025] [ 14.331306] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:57:48.322 2025] [ 14.331323] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.322 2025] [ 14.331372] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:57:48.338 2025] [ 14.331376] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:57:48.338 2025] [ 14.331384] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.338 2025] [ 14.331419] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:57:48.354 2025] [ 14.331424] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:57:48.354 2025] [ 14.331431] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.369 2025] [ 14.331464] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:57:48.369 2025] [ 14.331470] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:57:48.369 2025] [ 14.331476] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.385 2025] [ 14.331510] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:57:48.385 2025] [ 14.331514] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:57:48.385 2025] [ 14.331522] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.403 2025] [ 14.331556] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:57:48.403 2025] [ 14.331561] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:57:48.416 2025] [ 14.331568] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.416 2025] [ 14.331601] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:57:48.416 2025] [ 14.331606] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:57:48.432 2025] [ 14.331613] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.432 2025] [ 14.331646] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:57:48.448 2025] [ 14.331652] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:57:48.448 2025] [ 14.331659] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:48.805 2025] [ 14.822478] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:57:52.131 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:57:52.137 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:57:53.972 2025] [ 19.984292] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:57:53.974 2025] [ 19.984321] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:57:53.980 2025] [ 19.984343] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:53.986 2025] [ 19.984406] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:57:53.993 2025] [ 19.984411] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:57:53.999 2025] [ 19.984420] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.005 2025] [ 19.984461] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:57:54.011 2025] [ 19.984466] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:57:54.016 2025] [ 19.984473] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.023 2025] [ 19.984507] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:57:54.029 2025] [ 19.984512] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:57:54.035 2025] [ 19.984523] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.041 2025] [ 19.984562] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:57:54.047 2025] [ 19.984568] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:57:54.053 2025] [ 19.984576] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.060 2025] [ 19.984619] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:57:54.066 2025] [ 19.984623] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:57:54.075 2025] [ 19.984630] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.082 2025] [ 19.984668] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:57:54.088 2025] [ 19.984676] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:57:54.094 2025] [ 19.984683] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.101 2025] [ 19.984717] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:57:54.108 2025] [ 19.984722] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:57:54.115 2025] [ 19.984728] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.121 2025] [ 20.054959] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:57:54.127 2025] [ 20.054984] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:57:54.133 2025] [ 20.055008] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.139 2025] [ 20.055169] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:57:54.145 2025] [ 20.055177] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:57:54.151 2025] [ 20.055190] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.157 2025] [ 20.055239] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:57:54.163 2025] [ 20.055244] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:57:54.169 2025] [ 20.055252] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.176 2025] [ 20.055287] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:57:54.182 2025] [ 20.055293] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:57:54.188 2025] [ 20.055301] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.194 2025] [ 20.055337] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:57:54.200 2025] [ 20.055344] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:57:54.206 2025] [ 20.055351] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.212 2025] [ 20.055390] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:57:54.219 2025] [ 20.055395] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:57:54.224 2025] [ 20.055402] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.231 2025] [ 20.055436] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:57:54.237 2025] [ 20.055441] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:57:54.243 2025] [ 20.055452] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:57:54.249 2025] [ 20.055487] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:57:54.255 2025] [ 20.055492] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:57:54.261 2025] [ 20.055499] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:25.723 2025] [Fri Jan 03 13:58:25.723 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:58:25.735 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:58:25.785 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:58:25.806 2025] Trying to boot from MMC1 [Fri Jan 03 13:58:25.970 2025] Authentication passed [Fri Jan 03 13:58:25.976 2025] Authentication passed [Fri Jan 03 13:58:25.982 2025] Authentication passed [Fri Jan 03 13:58:26.018 2025] Authentication passed [Fri Jan 03 13:58:26.023 2025] Authentication passed [Fri Jan 03 13:58:26.028 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:58:26.031 2025] [Fri Jan 03 13:58:26.032 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:58:26.038 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:58:26.336 2025] [Fri Jan 03 13:58:26.336 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:58:26.341 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:58:26.385 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:58:26.388 2025] Error: could not access storage. [Fri Jan 03 13:58:26.392 2025] Trying to boot from MMC1 [Fri Jan 03 13:58:26.554 2025] Authentication passed [Fri Jan 03 13:58:26.558 2025] Authentication passed [Fri Jan 03 13:58:27.211 2025] [Fri Jan 03 13:58:27.211 2025] [Fri Jan 03 13:58:27.211 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:58:27.214 2025] [Fri Jan 03 13:58:27.214 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:58:27.216 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:58:27.219 2025] DRAM: 2 GiB [Fri Jan 03 13:58:27.462 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:58:27.467 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:58:27.477 2025] Loading Environment from MMC... OK [Fri Jan 03 13:58:27.684 2025] In: serial [Fri Jan 03 13:58:27.684 2025] Out: serial [Fri Jan 03 13:58:27.685 2025] Err: serial [Fri Jan 03 13:58:27.685 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:58:27.687 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:58:27.849 2025] switch to partitions #0, OK [Fri Jan 03 13:58:27.851 2025] mmc0(part 0) is current device [Fri Jan 03 13:58:27.997 2025] SD/MMC found on device 0 [Fri Jan 03 13:58:27.999 2025] Running eMMC boot ... [Fri Jan 03 13:58:28.016 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 13:58:28.020 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:58:28.023 2025] Importing environment from mmc0 ... [Fri Jan 03 13:58:28.249 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:58:28.269 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 13:58:28.273 2025] Working FDT set to 88000000 [Fri Jan 03 13:58:28.277 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:58:28.279 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:58:28.284 2025] Working FDT set to 88000000 [Fri Jan 03 13:58:28.310 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:58:28.316 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:58:28.324 2025] Working FDT set to 8feed000 [Fri Jan 03 13:58:28.334 2025] [Fri Jan 03 13:58:28.334 2025] Starting kernel ... [Fri Jan 03 13:58:28.336 2025] [Fri Jan 03 13:58:28.372 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:58:28.378 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:58:28.396 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:58:28.401 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:58:28.494 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:58:28.499 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:58:28.501 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:58:28.510 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:58:28.518 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:58:28.526 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:58:28.536 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:58:28.544 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:58:28.553 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:58:28.561 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:58:28.570 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:58:28.578 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:58:28.588 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:58:28.596 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:58:28.605 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:58:28.607 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:58:28.614 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:58:28.617 2025] [ 0.000000] Normal empty [Fri Jan 03 13:58:28.620 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:58:28.624 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:58:28.628 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:58:28.634 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:58:28.640 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:58:28.647 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:58:28.653 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:58:28.660 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:58:28.666 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:58:28.672 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:58:28.680 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:58:28.685 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:58:28.689 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:58:28.695 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:58:28.700 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:58:28.704 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:58:28.711 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:58:28.717 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:58:28.722 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:58:28.726 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:58:28.732 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:58:28.740 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:58:28.746 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:58:28.751 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:58:28.758 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:58:28.806 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:58:28.815 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:58:28.823 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:58:28.831 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:58:28.837 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:58:28.851 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:58:28.858 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:58:28.864 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:58:28.871 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:58:28.877 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:58:28.883 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:58:28.891 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:58:28.898 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:58:28.903 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:58:28.909 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:58:28.912 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:58:28.917 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:58:28.921 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:58:28.926 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:58:28.933 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:58:28.937 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:58:28.944 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:58:28.951 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:58:28.960 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:58:28.965 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:58:28.971 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:58:28.977 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:58:28.985 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:58:28.992 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:58:28.998 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:58:29.009 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:58:29.017 2025] [ 0.000245] Console: colour dummy device 80x25 [Fri Jan 03 13:58:29.023 2025] [ 0.528874] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:58:29.035 2025] [ 0.528885] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:58:29.039 2025] [ 0.528969] LSM: Security Framework initializing [Fri Jan 03 13:58:29.044 2025] [ 0.529108] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:58:29.052 2025] [ 0.529132] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:58:29.060 2025] [ 0.530822] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:58:29.064 2025] [ 0.530830] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:58:29.070 2025] [ 0.530874] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:58:29.077 2025] [ 0.583336] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:58:29.084 2025] [ 0.583573] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:58:29.093 2025] [ 0.583664] EFI services will not be available. [Fri Jan 03 13:58:29.097 2025] [ 0.583921] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:58:29.102 2025] [ 0.584696] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:58:29.106 2025] [ 0.584808] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:58:29.113 2025] [ 0.584826] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:58:29.121 2025] [ 0.584883] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:58:29.128 2025] [ 0.634968] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:58:29.132 2025] [ 0.635058] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:58:29.139 2025] [ 0.635071] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:58:29.147 2025] [ 0.635105] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:58:29.154 2025] [ 0.660970] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:58:29.158 2025] [ 0.661056] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:58:29.165 2025] [ 0.661068] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:58:29.173 2025] [ 0.661100] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:58:29.179 2025] [ 0.661156] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:58:29.184 2025] [ 0.661162] SMP: Total of 4 processors activated. [Fri Jan 03 13:58:29.188 2025] [ 0.661166] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:58:29.194 2025] [ 0.700595] CPU features: detected: CRC32 instructions [Fri Jan 03 13:58:29.199 2025] [ 0.700639] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:58:29.204 2025] [ 0.700642] alternatives: applying system-wide alternatives [Fri Jan 03 13:58:29.209 2025] [ 0.702133] devtmpfs: initialized [Fri Jan 03 13:58:29.213 2025] [ 0.713753] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:58:29.223 2025] [ 0.713781] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:58:29.230 2025] [ 0.718969] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:58:29.235 2025] [ 0.719806] DMI not present or invalid. [Fri Jan 03 13:58:29.240 2025] [ 0.720337] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:58:29.245 2025] [ 0.734281] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:58:29.252 2025] [ 0.734566] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:58:29.260 2025] [ 0.734760] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:58:29.268 2025] [ 0.734898] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:58:29.274 2025] [ 0.735088] audit: type=2000 audit(0.732:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:58:29.282 2025] [ 0.735715] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:58:29.288 2025] [ 0.735720] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:58:29.294 2025] [ 0.735964] ASID allocator initialised with 65536 entries [Fri Jan 03 13:58:29.300 2025] [ 0.750844] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:58:29.307 2025] [ 0.759989] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:58:29.314 2025] [ 0.759999] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:58:29.320 2025] [ 0.760003] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:58:29.327 2025] [ 0.760006] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:58:29.334 2025] [ 0.760010] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:58:29.341 2025] [ 0.760012] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:58:29.347 2025] [ 0.760016] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:58:29.354 2025] [ 0.760019] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:58:29.361 2025] [ 0.761171] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:58:29.369 2025] [ 0.761678] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:58:29.376 2025] [ 0.761686] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:58:29.383 2025] [ 0.761700] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:58:29.392 2025] [ 0.761716] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:58:29.401 2025] [ 0.761727] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.408 2025] [ 0.761733] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:58:29.415 2025] [ 0.761955] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:58:29.422 2025] [ 0.761960] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:58:29.429 2025] [ 0.761970] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:58:29.438 2025] [ 0.761983] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:58:29.446 2025] [ 0.761992] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.454 2025] [ 0.761996] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:58:29.460 2025] [ 0.762250] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:58:29.467 2025] [ 0.762255] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:58:29.475 2025] [ 0.762268] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:58:29.483 2025] [ 0.762281] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:58:29.492 2025] [ 0.762289] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.499 2025] [ 0.762293] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:58:29.506 2025] [ 0.762506] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:58:29.513 2025] [ 0.762511] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:58:29.520 2025] [ 0.762520] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 13:58:29.529 2025] [ 1.03614[5] printk: console [ttyS2] printing thread started [Fri Jan 03 13:58:29.535 2025] 0.762532] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 13:58:29.544 2025] [ 1.036166] printk: console [ttyS2] enabled [Fri Jan 03 13:58:29.549 2025] [ 1.036170] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:58:29.553 2025] [ 1.050254] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:58:29.560 2025] [ 1.051445] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:58:29.566 2025] [ 1.051453] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:58:29.573 2025] [ 1.051467] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:58:29.583 2025] [ 1.051484] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:58:29.594 2025] [ 1.051497] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.601 2025] [ 1.051502] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:58:29.607 2025] [ 1.051530] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:58:29.615 2025] [ 1.052469] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:58:29.623 2025] [ 1.052478] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:58:29.629 2025] [ 1.052489] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:58:29.638 2025] [ 1.052505] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:58:29.647 2025] [ 1.052514] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.653 2025] [ 1.052519] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:58:29.659 2025] [ 1.055505] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:58:29.666 2025] [ 1.062609] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:58:29.674 2025] [ 1.069087] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:58:29.680 2025] [ 1.069497] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:58:29.686 2025] [ 1.069507] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:58:29.692 2025] [ 1.069521] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:58:29.703 2025] [ 1.069538] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:58:29.714 2025] [ 1.069552] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.720 2025] [ 1.069557] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:58:29.726 2025] [ 1.103045] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:58:29.734 2025] [ 1.103336] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:58:29.741 2025] [ 1.104087] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:58:29.747 2025] [ 1.104094] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:58:29.753 2025] [ 1.104105] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:58:29.766 2025] [ 1.104129] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:58:29.778 2025] [ 1.104145] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.785 2025] [ 1.104150] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:58:29.791 2025] [ 1.104897] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:58:29.799 2025] [ 1.104945] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:58:29.812 2025] [ 1.105211] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:58:29.818 2025] [ 1.105222] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:58:29.825 2025] [ 1.105232] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:58:29.831 2025] [ 1.105967] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:58:29.840 2025] [ 1.122573] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:58:29.847 2025] [ 1.127491] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:58:29.856 2025] [ 1.127532] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:58:29.862 2025] [ 1.127539] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:58:29.868 2025] [ 1.127557] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:58:29.878 2025] [ 1.127579] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:58:29.887 2025] [ 1.127590] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.895 2025] [ 1.127595] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:58:29.901 2025] [ 1.128077] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:58:29.907 2025] [ 1.128088] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:58:29.914 2025] [ 1.128127] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:58:29.923 2025] [ 1.128156] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:58:29.933 2025] [ 1.128166] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.940 2025] [ 1.128170] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:58:29.945 2025] [ 1.128175] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:58:29.951 2025] [ 1.128179] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:58:29.958 2025] [ 1.128187] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:58:29.967 2025] [ 1.128199] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:58:29.977 2025] [ 1.128207] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:58:29.984 2025] [ 1.128211] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:58:29.990 2025] [ 1.128961] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:58:29.996 2025] [ 1.128973] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:58:30.002 2025] [ 1.128985] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:58:30.012 2025] [ 1.129002] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:58:30.021 2025] [ 1.129013] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:58:30.028 2025] [ 1.129018] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:58:30.034 2025] [ 1.129167] mmc0: CQHCI version 5.10 [Fri Jan 03 13:58:30.038 2025] [ 1.129168] mmc1: CQHCI version 5.10 [Fri Jan 03 13:58:30.041 2025] [ 1.129543] mmc2: CQHCI version 5.10 [Fri Jan 03 13:58:30.045 2025] [ 1.131827] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:58:30.054 2025] [ 1.134290] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:58:30.064 2025] [ 1.137276] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:58:30.072 2025] [ 1.137475] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:58:30.079 2025] [ 1.137532] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:58:30.085 2025] [ 1.140609] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:58:30.090 2025] [ 1.140830] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:58:30.097 2025] [ 1.140898] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:58:30.103 2025] [ 1.142572] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:58:30.110 2025] [ 1.142583] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:58:30.117 2025] [ 1.142604] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:58:30.126 2025] [ 1.142624] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:58:30.132 2025] [ 1.142636] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:58:30.139 2025] [ 1.142640] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:58:30.145 2025] [ 1.142649] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:58:30.155 2025] [ 1.142661] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:58:30.163 2025] [ 1.142670] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:58:30.170 2025] [ 1.142675] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:58:30.177 2025] [ 1.143161] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:58:30.183 2025] [ 1.143168] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:58:30.190 2025] [ 1.143180] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:58:30.199 2025] [ 1.143194] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:58:30.205 2025] [ 1.143197] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:58:30.210 2025] [ 1.143698] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:58:30.219 2025] [ 1.143711] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:58:30.226 2025] [ 1.143715] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:58:30.231 2025] [ 1.143808] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:58:30.240 2025] [ 1.143818] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:58:30.246 2025] [ 1.143822] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:58:30.251 2025] [ 1.143888] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:58:30.260 2025] [ 1.143898] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:58:30.266 2025] [ 1.143901] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:58:30.271 2025] [ 1.144570] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:58:30.278 2025] [ 1.147492] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:58:30.286 2025] [ 1.159532] ALSA device list: [Fri Jan 03 13:58:30.289 2025] [ 1.159542] No soundcards found. [Fri Jan 03 13:58:30.292 2025] [ 1.166033] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:58:30.300 2025] [ 1.169233] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:58:30.307 2025] [ 1.180817] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:58:30.315 2025] [ 1.186632] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:58:30.322 2025] [ 1.226939] mmc1: new MMC card at address 0001 [Fri Jan 03 13:58:30.327 2025] [ 1.227775] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:58:30.331 2025] [ 1.236438] mmcblk1: p1 [Fri Jan 03 13:58:30.334 2025] [ 1.237278] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:58:30.339 2025] [ 1.238902] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:58:30.344 2025] [ 1.240243] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:58:30.350 2025] [ 1.272941] mmc0: Command Queue Engine enabled [Fri Jan 03 13:58:30.355 2025] [ 1.272958] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:58:30.360 2025] [ 1.273693] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:58:30.364 2025] [ 1.277593] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:58:30.368 2025] [ 1.278679] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:58:30.373 2025] [ 1.279994] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:58:30.377 2025] [ 1.281160] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:58:30.384 2025] [ 1.301328] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:58:30.389 2025] [ 1.301708] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:30.397 2025] [ 1.301785] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:58:30.403 2025] [ 1.301928] devtmpfs: mounted [Fri Jan 03 13:58:30.406 2025] [ 1.303306] Freeing unused kernel memory: 1856K [Fri Jan 03 13:58:30.411 2025] [ 1.303425] Run /sbin/init as init process [Fri Jan 03 13:58:30.415 2025] [ 1.303429] with arguments: [Fri Jan 03 13:58:30.418 2025] [ 1.303430] /sbin/init [Fri Jan 03 13:58:30.421 2025] [ 1.303432] with environment: [Fri Jan 03 13:58:30.424 2025] [ 1.303434] HOME=/ [Fri Jan 03 13:58:30.426 2025] [ 1.303436] TERM=linux [Fri Jan 03 13:58:30.429 2025] [ 1.303437] syntec_extend= [Fri Jan 03 13:58:30.432 2025] [ 1.394771] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:58:30.439 2025] [ 1.421889] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:58:30.443 2025] [ 1.423120] Segment Routing with IPv6 [Fri Jan 03 13:58:30.447 2025] [ 1.423154] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:58:30.451 2025] [ 1.474412] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:58:30.482 2025] [ 1.474973] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:58:30.487 2025] [ 1.478270] systemd[1]: Hostname set to . [Fri Jan 03 13:58:30.492 2025] [ 1.602604] systemd-sysv-generator[182]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:58:30.517 2025] [ 1.901506] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:58:30.532 2025] [ 1.904250] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:58:30.552 2025] [ 1.967244] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:58:30.560 2025] [ 1.970513] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:58:30.565 2025] [ 1.972137] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:58:30.571 2025] [ 1.972640] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:58:30.577 2025] [ 1.972983] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:58:30.585 2025] [ 1.973209] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:58:30.593 2025] [ 1.973587] systemd[1]: Reached target Path Units. [Fri Jan 03 13:58:30.597 2025] [ 1.973688] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:58:30.603 2025] [ 1.973745] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:58:30.608 2025] [ 1.973828] systemd[1]: Reached target Swaps. [Fri Jan 03 13:58:30.612 2025] [ 1.978014] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:58:30.619 2025] [ 1.978221] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:58:30.625 2025] [ 1.984289] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:58:30.630 2025] [ 1.984785] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:58:30.637 2025] [ 1.985612] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:58:30.644 2025] [ 1.986183] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:58:30.654 2025] [ 1.986758] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:58:30.660 2025] [ 1.987597] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:58:30.668 2025] [ 1.989466] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:58:30.685 2025] [ 1.989979] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:58:30.690 2025] [ 1.990590] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:58:30.696 2025] [ 2.059642] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:58:30.701 2025] [ 2.063762] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:58:30.708 2025] [ 2.068096] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:58:30.714 2025] [ 2.068927] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:58:30.726 2025] [ 2.070230] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:58:30.735 2025] [ 2.074179] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:58:30.740 2025] [ 2.080668] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:58:30.747 2025] [ 2.086263] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:58:30.753 2025] [ 2.091716] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:58:30.758 2025] [ 2.097070] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:58:30.765 2025] [ 2.102811] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:58:30.769 2025] [ 2.103392] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:58:30.780 2025] [ 2.104786] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:58:30.793 2025] [ 2.104809] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:58:30.802 2025] [ 2.108471] systemd[1]: Starting Journal Service... [Fri Jan 03 13:58:30.807 2025] [ 2.115235] fuse: init (API version 7.37) [Fri Jan 03 13:58:30.811 2025] [ 2.119964] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:58:30.816 2025] [ 2.125016] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:58:30.824 2025] [ 2.130244] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:58:30.831 2025] [ 2.135187] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:58:30.836 2025] [ 2.140533] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:58:30.843 2025] [ 2.157652] systemd[1]: Started RPC Bind. [Fri Jan 03 13:58:30.846 2025] [ 2.159844] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:58:30.851 2025] [ 2.161940] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:58:30.857 2025] [ 2.164244] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:58:30.863 2025] [ 2.165130] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:58:30.868 2025] [ 2.170862] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:58:30.874 2025] [ 2.171335] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:58:30.881 2025] [ 2.173710] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:58:30.888 2025] [ 2.177551] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:58:30.892 2025] [ 2.178587] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:58:30.898 2025] [ 2.180912] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:58:30.904 2025] [ 2.186391] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:58:30.910 2025] [ 2.192621] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:58:30.917 2025] [ 2.198012] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:58:30.925 2025] [ 2.205305] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:58:30.935 2025] [ 2.207519] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:58:30.940 2025] [ 2.212178] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:58:30.947 2025] [ 2.213442] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:58:30.954 2025] [ 2.214754] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:58:30.959 2025] [ 2.242840] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:58:30.965 2025] [ 2.246884] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:58:30.971 2025] [ 2.249886] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:58:30.982 2025] [ 2.250414] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:58:30.996 2025] [ 2.254899] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:58:31.002 2025] [ 2.260699] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:58:31.014 2025] [ 2.273263] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:58:31.023 2025] [ 2.278335] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:58:31.029 2025] [ 2.279191] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:58:31.035 2025] [ 2.341496] systemd[1]: Started Journal Service. [Fri Jan 03 13:58:31.040 2025] [ 2.402078] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 13:58:31.199 2025] [ 2.701087] random: crng init done [Fri Jan 03 13:58:31.371 2025] [ 2.877534] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:58:31.377 2025] [ 2.877555] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:58:31.383 2025] [ 2.877570] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:58:31.483 2025] [ 2.877598] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:58:31.496 2025] [ 2.877621] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:58:31.510 2025] [ 2.891531] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:58:31.518 2025] [ 2.891548] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:58:31.543 2025] [ 2.891578] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:58:31.566 2025] [ 2.891601] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:58:31.573 2025] [ 2.891611] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:58:31.582 2025] [ 2.891615] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:58:31.600 2025] [ 2.891626] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:58:31.624 2025] [ 2.891638] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:58:31.630 2025] [ 2.891644] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:58:31.639 2025] [ 2.891648] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:58:31.652 2025] [ 2.891658] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:58:31.669 2025] [ 2.891669] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:58:31.681 2025] [ 2.906438] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:58:31.691 2025] [ 2.906458] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:58:31.697 2025] [ 2.906492] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:58:31.720 2025] [ 2.906494] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:58:31.744 2025] [ 2.906526] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:58:31.751 2025] [ 2.952663] mc: Linux media interface: v0.10 [Fri Jan 03 13:58:31.762 2025] [ 2.983264] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:58:31.768 2025] [ 3.002709] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:58:31.787 2025] [ 3.004490] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:28:49 UTC (1681064929) [Fri Jan 03 13:58:31.844 2025] [ 3.006089] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:58:31.874 2025] [ 3.006117] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:58:31.903 2025] [ 3.059089] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:58:31.913 2025] [ 3.059270] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:58:31.921 2025] [ 3.059336] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:58:31.940 2025] [ 3.059613] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:58:31.972 2025] [ 3.061238] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:58:32.021 2025] [ 3.061276] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:58:32.027 2025] [ 3.061311] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:58:32.036 2025] [ 3.061319] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:58:32.042 2025] [ 3.308684] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:58:32.053 2025] [ 3.321805] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:58:32.064 2025] [ 3.321995] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:58:32.071 2025] [ 3.322380] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:58:32.079 2025] [ 3.332956] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:58:32.084 2025] [ 3.332994] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:58:32.091 2025] [ 3.333001] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:58:32.097 2025] [ 3.333293] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:58:32.137 2025] [ 3.333346] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:58:32.152 2025] [ 3.333365] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:58:32.159 2025] [ 3.333371] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:58:32.165 2025] [ 3.334775] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:58:32.172 2025] [ 3.334866] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:58:32.178 2025] [ 3.347370] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:58:32.184 2025] [ 3.348250] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:58:32.192 2025] [ 3.348287] Get kick_gpio number= (418) [Fri Jan 03 13:58:32.197 2025] [ 3.377876] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:58:32.204 2025] [ 3.377926] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:58:32.214 2025] [ 3.379790] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:58:32.221 2025] [ 3.379866] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:58:32.231 2025] [ 3.379874] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:58:32.241 2025] [ 3.379917] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:58:32.249 2025] [ 3.380206] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:58:32.706 2025] [ 4.212808] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:58:32.776 2025] [ 4.281484] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:58:32.782 2025] [ 4.288810] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:58:32.844 2025] [ 4.350065] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:58:32.851 2025] [ 4.352648] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:58:32.860 2025] [ 4.352683] cfg80211: failed to load regulatory.db [Fri Jan 03 13:58:32.893 2025] [ 4.398976] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:58:32.898 2025] [ 4.399000] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:58:32.906 2025] [ 4.413228] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:58:32.917 2025] [ 4.413281] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:58:32.927 2025] [ 4.413304] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:58:32.933 2025] [ 4.413310] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:58:32.939 2025] [ 4.413654] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:58:33.104 2025] [ 4.609830] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:58:33.116 2025] [ 4.615157] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:58:33.152 2025] [ 4.615192] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:58:33.176 2025] [ 4.674226] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:58:33.194 2025] [ 4.674283] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:58:33.219 2025] [ 4.674485] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:58:33.230 2025] [ 4.674504] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:58:33.243 2025] [ 4.695601] xhci-hcd xhci-hcd.4.auto: irq 471, io mem 0x31100000 [Fri Jan 03 13:58:33.257 2025] [ 4.707647] hub 1-0:1.0: USB hub found [Fri Jan 03 13:58:33.260 2025] [ 4.707694] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:58:33.445 2025] [ 4.950209] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:58:33.639 2025] [ 5.144496] hub 1-1:1.0: USB hub found [Fri Jan 03 13:58:33.644 2025] [ 5.151693] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:58:33.908 2025] [ 5.410836] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:58:33.983 2025] [ 5.488364] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:58:33.996 2025] [ 5.488411] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:58:34.185 2025] [ 5.688465] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:58:34.187 2025] [ 5.688532] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:34.196 2025] [ 5.699352] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:58:34.201 2025] [ 5.699397] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:34.209 2025] [ 5.701382] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:58:34.215 2025] [ 5.701419] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:34.285 2025] [ 5.790438] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:58:34.369 2025] [ 5.875521] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:58:34.374 2025] [ 5.876098] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:34.614 2025] [ 6.119585] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:58:34.619 2025] [ 6.120911] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:58:34.694 2025] *************************************************************** [Fri Jan 03 13:58:34.699 2025] *************************************************************** [Fri Jan 03 13:58:34.705 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:58:34.710 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:58:34.713 2025] bash [Fri Jan 03 13:58:34.714 2025] cifs-utils [Fri Jan 03 13:58:34.716 2025] dosfstools [Fri Jan 03 13:58:34.717 2025] grub-common [Fri Jan 03 13:58:34.718 2025] grub-editenv [Fri Jan 03 13:58:34.718 2025] grub-efi [Fri Jan 03 13:58:34.719 2025] less [Fri Jan 03 13:58:34.720 2025] lib32-libgcc1 [Fri Jan 03 13:58:34.721 2025] lib32-libstdc++6 [Fri Jan 03 13:58:34.723 2025] libdw1 [Fri Jan 03 13:58:34.724 2025] libelf1 [Fri Jan 03 13:58:34.725 2025] libgcc1 [Fri Jan 03 13:58:34.726 2025] libgdbm-compat4 [Fri Jan 03 13:58:34.727 2025] libgdbm6 [Fri Jan 03 13:58:34.728 2025] libgmp10 [Fri Jan 03 13:58:34.729 2025] libidn2-0 [Fri Jan 03 13:58:34.730 2025] libreadline8 [Fri Jan 03 13:58:34.731 2025] libstdc++6 [Fri Jan 03 13:58:34.733 2025] libunistring2 [Fri Jan 03 13:58:34.734 2025] libvte-2.91-0 [Fri Jan 03 13:58:34.735 2025] nettle [Fri Jan 03 13:58:34.736 2025] onboard [Fri Jan 03 13:58:34.737 2025] parted [Fri Jan 03 13:58:34.738 2025] rxvt-unicode [Fri Jan 03 13:58:34.739 2025] [Fri Jan 03 13:58:34.739 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:58:34.745 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:58:34.751 2025] the opkg remove command. i.e.: [Fri Jan 03 13:58:34.754 2025] opkg remove [Fri Jan 03 13:58:34.756 2025] Where is the name printed in the list above [Fri Jan 03 13:58:34.761 2025] [Fri Jan 03 13:58:34.761 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:58:34.766 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:58:34.772 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:58:34.777 2025] also remove the dependent packages as well [Fri Jan 03 13:58:34.782 2025] *************************************************************** [Fri Jan 03 13:58:34.787 2025] *************************************************************** [Fri Jan 03 13:58:39.654 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:58:39.660 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:58:39.844 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:58:39.850 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:58:40.026 2025] [ 11.531261] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:58:40.033 2025] [ 11.531285] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:58:40.037 2025] [ 11.531303] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.043 2025] [ 11.531360] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:58:40.049 2025] [ 11.531365] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:58:40.055 2025] [ 11.531373] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.061 2025] [ 11.531411] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:58:40.067 2025] [ 11.531417] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:58:40.074 2025] [ 11.531424] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.080 2025] [ 11.531459] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:58:40.086 2025] [ 11.531464] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:58:40.092 2025] [ 11.531474] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.098 2025] [ 11.531509] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:58:40.105 2025] [ 11.531514] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:58:40.112 2025] [ 11.531520] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.117 2025] [ 11.531560] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:58:40.123 2025] [ 11.531565] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:58:40.130 2025] [ 11.531572] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.136 2025] [ 11.531607] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:58:40.141 2025] [ 11.531612] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:58:40.148 2025] [ 11.531620] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.154 2025] [ 11.531653] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:58:40.160 2025] [ 11.531658] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:58:40.166 2025] [ 11.531665] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:40.214 2025] [Fri Jan 03 13:58:40.214 2025] _____ _____ _ _ [Fri Jan 03 13:58:40.220 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:58:40.223 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:58:40.229 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:58:40.234 2025] |___| |___| [Fri Jan 03 13:58:40.239 2025] [Fri Jan 03 13:58:40.239 2025] Arago Project am62xx-evm - [Fri Jan 03 13:58:40.241 2025] [Fri Jan 03 13:58:40.241 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:58:40.244 2025] [Fri Jan 03 13:58:40.244 2025] am62xx-evm login: [ 13.848483] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:58:42.355 2025] [ 13.848509] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:58:42.356 2025] [ 13.848524] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.362 2025] [ 13.848569] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:58:42.366 2025] [ 13.848575] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:58:42.372 2025] [ 13.848583] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.378 2025] [ 13.848619] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:58:42.384 2025] [ 13.848624] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:58:42.390 2025] [ 13.848630] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.396 2025] [ 13.848668] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:58:42.402 2025] [ 13.848674] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:58:42.409 2025] [ 13.848680] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.415 2025] [ 13.848713] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:58:42.421 2025] [ 13.848721] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:58:42.427 2025] [ 13.848729] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.434 2025] [ 13.848762] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:58:42.440 2025] [ 13.848767] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:58:42.445 2025] [ 13.848774] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.451 2025] [ 13.848809] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:58:42.457 2025] [ 13.848814] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:58:42.465 2025] [ 13.848821] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.471 2025] [ 13.848854] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:58:42.476 2025] [ 13.848859] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:58:42.482 2025] [ 13.848870] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:42.839 2025] [ 14.335950] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:58:46.161 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:58:46.168 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:58:47.987 2025] [ 19.492107] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:58:47.993 2025] [ 19.492135] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:58:47.998 2025] [ 19.492155] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.004 2025] [ 19.492224] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:58:48.010 2025] [ 19.492230] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:58:48.016 2025] [ 19.492237] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.022 2025] [ 19.492275] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:58:48.029 2025] [ 19.492280] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:58:48.035 2025] [ 19.492286] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.041 2025] [ 19.492322] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:58:48.047 2025] [ 19.492327] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:58:48.053 2025] [ 19.492334] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.059 2025] [ 19.492372] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:58:48.065 2025] [ 19.492378] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:58:48.071 2025] [ 19.492385] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.077 2025] [ 19.492426] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:58:48.084 2025] [ 19.492431] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:58:48.090 2025] [ 19.492439] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.096 2025] [ 19.492474] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:58:48.102 2025] [ 19.492479] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:58:48.108 2025] [ 19.492491] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.114 2025] [ 19.492527] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:58:48.122 2025] [ 19.492533] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:58:48.127 2025] [ 19.492539] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.133 2025] [ 19.571656] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:58:48.139 2025] [ 19.571682] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:58:48.145 2025] [ 19.571708] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.152 2025] [ 19.571768] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:58:48.157 2025] [ 19.571774] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:58:48.163 2025] [ 19.571781] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.170 2025] [ 19.571819] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:58:48.175 2025] [ 19.571824] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:58:48.181 2025] [ 19.571831] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.188 2025] [ 19.571871] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:58:48.193 2025] [ 19.571876] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:58:48.200 2025] [ 19.571883] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.206 2025] [ 19.571922] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:58:48.212 2025] [ 19.571927] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:58:48.218 2025] [ 19.571934] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.224 2025] [ 19.571967] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:58:48.230 2025] [ 19.571972] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:58:48.236 2025] [ 19.571983] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.242 2025] [ 19.572016] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:58:48.248 2025] [ 19.572080] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:58:48.256 2025] [ 19.572090] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:58:48.261 2025] [ 19.572140] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:58:48.267 2025] [ 19.572145] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:58:48.273 2025] [ 19.572152] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:19.834 2025] [Fri Jan 03 13:59:19.834 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:59:19.850 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:59:19.897 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 13:59:19.928 2025] Trying to boot from MMC1 [Fri Jan 03 13:59:20.086 2025] Authentication passed [Fri Jan 03 13:59:20.101 2025] Authentication passed [Fri Jan 03 13:59:20.101 2025] Authentication passed [Fri Jan 03 13:59:20.132 2025] Authentication passed [Fri Jan 03 13:59:20.148 2025] Authentication passed [Fri Jan 03 13:59:20.148 2025] Starting ATF on ARM64 core... [Fri Jan 03 13:59:20.148 2025] [Fri Jan 03 13:59:20.148 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 13:59:20.164 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 13:59:20.463 2025] [Fri Jan 03 13:59:20.463 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:59:20.463 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 13:59:20.510 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 13:59:20.510 2025] Error: could not access storage. [Fri Jan 03 13:59:20.510 2025] Trying to boot from MMC1 [Fri Jan 03 13:59:20.667 2025] Authentication passed [Fri Jan 03 13:59:20.667 2025] Authentication passed [Fri Jan 03 13:59:21.313 2025] [Fri Jan 03 13:59:21.313 2025] [Fri Jan 03 13:59:21.313 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 13:59:21.328 2025] [Fri Jan 03 13:59:21.328 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 13:59:21.328 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 13:59:21.328 2025] DRAM: 2 GiB [Fri Jan 03 13:59:21.564 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 13:59:21.579 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 13:59:21.579 2025] Loading Environment from MMC... OK [Fri Jan 03 13:59:21.795 2025] In: serial [Fri Jan 03 13:59:21.795 2025] Out: serial [Fri Jan 03 13:59:21.796 2025] Err: serial [Fri Jan 03 13:59:21.797 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 13:59:21.800 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 13:59:21.965 2025] switch to partitions #0, OK [Fri Jan 03 13:59:21.966 2025] mmc0(part 0) is current device [Fri Jan 03 13:59:22.110 2025] SD/MMC found on device 0 [Fri Jan 03 13:59:22.112 2025] Running eMMC boot ... [Fri Jan 03 13:59:22.129 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 13:59:22.132 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 13:59:22.135 2025] Importing environment from mmc0 ... [Fri Jan 03 13:59:22.359 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 13:59:22.382 2025] 62962 bytes read in 17 ms (3.5 MiB/s) [Fri Jan 03 13:59:22.385 2025] Working FDT set to 88000000 [Fri Jan 03 13:59:22.389 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 13:59:22.392 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 13:59:22.396 2025] Working FDT set to 88000000 [Fri Jan 03 13:59:22.423 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 13:59:22.429 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 13:59:22.437 2025] Working FDT set to 8feed000 [Fri Jan 03 13:59:22.446 2025] [Fri Jan 03 13:59:22.446 2025] Starting kernel ... [Fri Jan 03 13:59:22.448 2025] [Fri Jan 03 13:59:22.484 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 13:59:22.490 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 13:59:22.508 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 13:59:22.513 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 13:59:22.605 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 13:59:22.610 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 13:59:22.613 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 13:59:22.621 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 13:59:22.629 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 13:59:22.637 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 13:59:22.646 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 13:59:22.654 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 13:59:22.664 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 13:59:22.672 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 13:59:22.681 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 13:59:22.689 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 13:59:22.699 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 13:59:22.707 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 13:59:22.716 2025] [ 0.000000] Zone ranges: [Fri Jan 03 13:59:22.719 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:59:22.725 2025] [ 0.000000] DMA32 empty [Fri Jan 03 13:59:22.728 2025] [ 0.000000] Normal empty [Fri Jan 03 13:59:22.731 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 13:59:22.735 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 13:59:22.739 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 13:59:22.745 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 13:59:22.752 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 13:59:22.759 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 13:59:22.765 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 13:59:22.771 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 13:59:22.777 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 13:59:22.784 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 13:59:22.791 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 13:59:22.796 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 13:59:22.801 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 13:59:22.806 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 13:59:22.811 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 13:59:22.815 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 13:59:22.822 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 13:59:22.828 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 13:59:22.833 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 13:59:22.837 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 13:59:22.843 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 13:59:22.851 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 13:59:22.857 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 13:59:22.862 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 13:59:22.869 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 13:59:22.917 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 13:59:22.926 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 13:59:22.934 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 13:59:22.942 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 13:59:22.948 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 13:59:22.963 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 13:59:22.969 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 13:59:22.975 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 13:59:22.983 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 13:59:22.988 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 13:59:22.995 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 13:59:23.002 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 13:59:23.010 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 13:59:23.014 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 13:59:23.020 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 13:59:23.024 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 13:59:23.028 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 13:59:23.032 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 13:59:23.037 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 13:59:23.044 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 13:59:23.048 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 13:59:23.056 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 13:59:23.062 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 13:59:23.072 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 13:59:23.078 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 13:59:23.083 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 13:59:23.088 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 13:59:23.096 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 13:59:23.103 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 13:59:23.109 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 13:59:23.121 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 13:59:23.128 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 13:59:23.135 2025] [ 0.528885] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 13:59:23.147 2025] [ 0.528896] pid_max: default: 32768 minimum: 301 [Fri Jan 03 13:59:23.151 2025] [ 0.528980] LSM: Security Framework initializing [Fri Jan 03 13:59:23.156 2025] [ 0.529118] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:59:23.163 2025] [ 0.529142] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 13:59:23.172 2025] [ 0.530818] rcu: Hierarchical SRCU implementation. [Fri Jan 03 13:59:23.177 2025] [ 0.530824] rcu: Max phase no-delay instances is 400. [Fri Jan 03 13:59:23.181 2025] [ 0.530868] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 13:59:23.189 2025] [ 0.583336] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 13:59:23.196 2025] [ 0.583581] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 13:59:23.204 2025] [ 0.583665] EFI services will not be available. [Fri Jan 03 13:59:23.209 2025] [ 0.583921] smp: Bringing up secondary CPUs ... [Fri Jan 03 13:59:23.213 2025] [ 0.584689] Detected VIPT I-cache on CPU1 [Fri Jan 03 13:59:23.218 2025] [ 0.584801] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 13:59:23.224 2025] [ 0.584818] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 13:59:23.232 2025] [ 0.584872] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 13:59:23.239 2025] [ 0.634957] Detected VIPT I-cache on CPU2 [Fri Jan 03 13:59:23.244 2025] [ 0.635044] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 13:59:23.250 2025] [ 0.635057] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 13:59:23.259 2025] [ 0.635089] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 13:59:23.266 2025] [ 0.660962] Detected VIPT I-cache on CPU3 [Fri Jan 03 13:59:23.269 2025] [ 0.661045] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 13:59:23.276 2025] [ 0.661058] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 13:59:23.286 2025] [ 0.661089] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 13:59:23.290 2025] [ 0.661146] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 13:59:23.295 2025] [ 0.661152] SMP: Total of 4 processors activated. [Fri Jan 03 13:59:23.300 2025] [ 0.695341] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 13:59:23.306 2025] [ 0.695345] CPU features: detected: CRC32 instructions [Fri Jan 03 13:59:23.311 2025] [ 0.695389] CPU: All CPU(s) started at EL2 [Fri Jan 03 13:59:23.315 2025] [ 0.695392] alternatives: applying system-wide alternatives [Fri Jan 03 13:59:23.321 2025] [ 0.696853] devtmpfs: initialized [Fri Jan 03 13:59:23.324 2025] [ 0.708458] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 13:59:23.334 2025] [ 0.708486] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 13:59:23.341 2025] [ 0.713647] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 13:59:23.346 2025] [ 0.714417] DMI not present or invalid. [Fri Jan 03 13:59:23.350 2025] [ 0.714927] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 13:59:23.357 2025] [ 0.729161] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 13:59:23.365 2025] [ 0.729455] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 13:59:23.372 2025] [ 0.729660] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 13:59:23.380 2025] [ 0.729803] audit: initializing netlink subsys (disabled) [Fri Jan 03 13:59:23.386 2025] [ 0.729969] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 13:59:23.393 2025] [ 0.730553] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 13:59:23.400 2025] [ 0.730557] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 13:59:23.407 2025] [ 0.730780] ASID allocator initialised with 65536 entries [Fri Jan 03 13:59:23.411 2025] [ 0.745647] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 13:59:23.420 2025] [ 0.754676] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 13:59:23.427 2025] [ 0.754687] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 13:59:23.432 2025] [ 0.754691] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:59:23.439 2025] [ 0.754694] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 13:59:23.445 2025] [ 0.754697] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 13:59:23.452 2025] [ 0.754700] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 13:59:23.460 2025] [ 0.754704] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 13:59:23.466 2025] [ 0.754707] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 13:59:23.472 2025] [ 0.755801] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 13:59:23.481 2025] [ 0.756262] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 13:59:23.488 2025] [ 0.756268] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 13:59:23.496 2025] [ 0.756281] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 13:59:23.504 2025] [ 0.756297] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 13:59:23.512 2025] [ 0.756308] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.519 2025] [ 0.756314] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 13:59:23.526 2025] [ 0.756544] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 13:59:23.534 2025] [ 0.756556] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 13:59:23.541 2025] [ 0.756566] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 13:59:23.550 2025] [ 0.756578] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 13:59:23.559 2025] [ 0.756588] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.566 2025] [ 0.756591] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 13:59:23.573 2025] [ 0.756845] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 13:59:23.580 2025] [ 0.756849] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 13:59:23.587 2025] [ 0.756859] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 13:59:23.596 2025] [ 0.756871] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 13:59:23.598 2025] [ 0.756879] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.598 2025] [ 0.756883] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 13:59:23.614 2025] [ 0.757091] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 13:59:23.614 2025] [ 0.757096] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 13:59:23.630 2025] [ 1.027[944] printk: console [ttyS2] printing thread started [Fri Jan 03 13:59:23.630 2025] 0.757106] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 13:59:23.645 2025] [ 1.027963] printk: console [ttyS2] enabled [Fri Jan 03 13:59:23.645 2025] [ 1.027967] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 13:59:23.656 2025] [ 1.042141] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 13:59:23.661 2025] [ 1.043344] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 13:59:23.661 2025] [ 1.043353] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 13:59:23.661 2025] [ 1.043365] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:59:23.677 2025] [ 1.043384] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 13:59:23.693 2025] [ 1.043396] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.693 2025] [ 1.043401] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 13:59:23.708 2025] [ 1.043431] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 13:59:23.708 2025] [ 1.044365] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 13:59:23.724 2025] [ 1.044374] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 13:59:23.724 2025] [ 1.044386] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 13:59:23.739 2025] [ 1.044400] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 13:59:23.739 2025] [ 1.044410] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.757 2025] [ 1.044414] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 13:59:23.757 2025] [ 1.047432] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 13:59:23.757 2025] [ 1.054274] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 13:59:23.771 2025] [ 1.059909] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 13:59:23.771 2025] [ 1.060798] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 13:59:23.787 2025] [ 1.060805] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 13:59:23.787 2025] [ 1.060820] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:59:23.802 2025] [ 1.060837] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 13:59:23.818 2025] [ 1.060851] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.818 2025] [ 1.060856] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 13:59:23.818 2025] [ 1.094727] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 13:59:23.834 2025] [ 1.095015] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 13:59:23.834 2025] [ 1.095821] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 13:59:23.849 2025] [ 1.095828] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 13:59:23.857 2025] [ 1.095840] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:59:23.865 2025] [ 1.095863] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 13:59:23.881 2025] [ 1.095882] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.881 2025] [ 1.095887] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 13:59:23.881 2025] [ 1.096636] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 13:59:23.897 2025] [ 1.096684] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 13:59:23.912 2025] [ 1.096947] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 13:59:23.912 2025] [ 1.096964] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 13:59:23.928 2025] [ 1.096969] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 13:59:23.928 2025] [ 1.097759] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 13:59:23.943 2025] [ 1.114240] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 13:59:23.943 2025] [ 1.118956] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 13:59:23.957 2025] [ 1.119025] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:59:23.959 2025] [ 1.119032] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:59:23.959 2025] [ 1.119044] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:59:23.975 2025] [ 1.119074] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 13:59:23.991 2025] [ 1.119085] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:59:23.991 2025] [ 1.119089] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 13:59:23.991 2025] [ 1.119393] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 13:59:24.006 2025] [ 1.119400] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:59:24.006 2025] [ 1.119410] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:59:24.022 2025] [ 1.119432] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:59:24.022 2025] [ 1.119445] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:59:24.038 2025] [ 1.119448] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 13:59:24.038 2025] [ 1.119453] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:59:24.053 2025] [ 1.119457] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:59:24.057 2025] [ 1.119471] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:59:24.069 2025] [ 1.119483] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 13:59:24.069 2025] [ 1.119494] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:59:24.085 2025] [ 1.119498] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 13:59:24.085 2025] [ 1.120155] mmc1: CQHCI version 5.10 [Fri Jan 03 13:59:24.085 2025] [ 1.120649] mmc0: CQHCI version 5.10 [Fri Jan 03 13:59:24.085 2025] [ 1.121989] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 13:59:24.101 2025] [ 1.122004] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 13:59:24.101 2025] [ 1.122023] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:59:24.116 2025] [ 1.122047] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 13:59:24.132 2025] [ 1.122065] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 13:59:24.132 2025] [ 1.122071] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 13:59:24.132 2025] [ 1.122561] mmc2: CQHCI version 5.10 [Fri Jan 03 13:59:24.147 2025] [ 1.122585] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 13:59:24.147 2025] [ 1.125019] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 13:59:24.163 2025] [ 1.128036] gpiochip_find_base: found new base at 418 [Fri Jan 03 13:59:24.163 2025] [ 1.128227] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 13:59:24.163 2025] [ 1.128289] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 13:59:24.179 2025] [ 1.131363] gpiochip_find_base: found new base at 366 [Fri Jan 03 13:59:24.179 2025] [ 1.131562] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 13:59:24.195 2025] [ 1.131623] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 13:59:24.195 2025] [ 1.133233] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 13:59:24.210 2025] [ 1.133243] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:59:24.226 2025] [ 1.133263] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 13:59:24.226 2025] [ 1.133282] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 13:59:24.242 2025] [ 1.133294] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 13:59:24.242 2025] [ 1.133298] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 13:59:24.242 2025] [ 1.133307] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 13:59:24.258 2025] [ 1.133318] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 13:59:24.273 2025] [ 1.133327] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 13:59:24.273 2025] [ 1.133332] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 13:59:24.273 2025] [ 1.133772] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 13:59:24.289 2025] [ 1.133781] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 13:59:24.289 2025] [ 1.133793] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 13:59:24.305 2025] [ 1.133805] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 13:59:24.305 2025] [ 1.133809] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 13:59:24.320 2025] [ 1.134294] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 13:59:24.320 2025] [ 1.134308] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 13:59:24.336 2025] [ 1.134311] gpio-453 (?): no flags found for gpios [Fri Jan 03 13:59:24.336 2025] [ 1.134404] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 13:59:24.336 2025] [ 1.134415] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 13:59:24.351 2025] [ 1.134419] gpio-396 (?): no flags found for gpios [Fri Jan 03 13:59:24.358 2025] [ 1.134484] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 13:59:24.367 2025] [ 1.134494] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 13:59:24.367 2025] [ 1.134498] gpio-375 (?): no flags found for gpios [Fri Jan 03 13:59:24.367 2025] [ 1.135172] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 13:59:24.383 2025] [ 1.137814] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 13:59:24.383 2025] [ 1.150124] ALSA device list: [Fri Jan 03 13:59:24.399 2025] [ 1.150136] No soundcards found. [Fri Jan 03 13:59:24.399 2025] [ 1.157321] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 13:59:24.399 2025] [ 1.162600] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 13:59:24.414 2025] [ 1.172426] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 13:59:24.414 2025] [ 1.172592] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 13:59:24.430 2025] [ 1.218517] mmc1: new MMC card at address 0001 [Fri Jan 03 13:59:24.430 2025] [ 1.219318] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 13:59:24.430 2025] [ 1.227444] mmcblk1: p1 [Fri Jan 03 13:59:24.430 2025] [ 1.228236] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:59:24.446 2025] [ 1.229906] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 13:59:24.446 2025] [ 1.231266] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 13:59:24.458 2025] [ 1.310557] mmc0: Command Queue Engine enabled [Fri Jan 03 13:59:24.462 2025] [ 1.310574] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 13:59:24.462 2025] [ 1.311318] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 13:59:24.462 2025] [ 1.315242] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 13:59:24.477 2025] [ 1.316347] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:59:24.477 2025] [ 1.317701] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 13:59:24.477 2025] [ 1.318833] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 13:59:24.493 2025] [ 1.338655] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 13:59:24.493 2025] [ 1.339086] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:24.493 2025] [ 1.339172] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 13:59:24.509 2025] [ 1.339327] devtmpfs: mounted [Fri Jan 03 13:59:24.509 2025] [ 1.340736] Freeing unused kernel memory: 1856K [Fri Jan 03 13:59:24.509 2025] [ 1.340857] Run /sbin/init as init process [Fri Jan 03 13:59:24.524 2025] [ 1.340860] with arguments: [Fri Jan 03 13:59:24.524 2025] [ 1.340862] /sbin/init [Fri Jan 03 13:59:24.524 2025] [ 1.340863] with environment: [Fri Jan 03 13:59:24.524 2025] [ 1.340865] HOME=/ [Fri Jan 03 13:59:24.524 2025] [ 1.340867] TERM=linux [Fri Jan 03 13:59:24.524 2025] [ 1.340868] syntec_extend= [Fri Jan 03 13:59:24.540 2025] [ 1.432193] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 13:59:24.540 2025] [ 1.457650] NET: Registered PF_INET6 protocol family [Fri Jan 03 13:59:24.540 2025] [ 1.458886] Segment Routing with IPv6 [Fri Jan 03 13:59:24.555 2025] [ 1.458921] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 13:59:24.558 2025] [ 1.495098] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 13:59:24.587 2025] [ 1.495646] systemd[1]: Detected architecture arm64. [Fri Jan 03 13:59:24.587 2025] [ 1.499043] systemd[1]: Hostname set to . [Fri Jan 03 13:59:24.587 2025] [ 1.640564] systemd-sysv-generator[183]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 13:59:24.619 2025] [ 1.930695] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 13:59:24.634 2025] [ 1.933514] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 13:59:24.659 2025] [ 1.996439] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 13:59:24.666 2025] [ 1.999887] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 13:59:24.666 2025] [ 2.001449] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 13:59:24.666 2025] [ 2.001977] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 13:59:24.681 2025] [ 2.002340] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 13:59:24.681 2025] [ 2.002543] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 13:59:24.697 2025] [ 2.002984] systemd[1]: Reached target Path Units. [Fri Jan 03 13:59:24.697 2025] [ 2.003084] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 13:59:24.713 2025] [ 2.003154] systemd[1]: Reached target Slice Units. [Fri Jan 03 13:59:24.713 2025] [ 2.003248] systemd[1]: Reached target Swaps. [Fri Jan 03 13:59:24.713 2025] [ 2.007431] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 13:59:24.728 2025] [ 2.007604] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 13:59:24.728 2025] [ 2.013738] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 13:59:24.728 2025] [ 2.014211] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 13:59:24.744 2025] [ 2.015050] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 13:59:24.744 2025] [ 2.015609] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 13:59:24.759 2025] [ 2.016197] systemd[1]: Listening on Journal Socket. [Fri Jan 03 13:59:24.760 2025] [ 2.016959] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 13:59:24.760 2025] [ 2.018793] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 13:59:24.760 2025] [ 2.019274] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 13:59:24.776 2025] [ 2.019766] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 13:59:24.776 2025] [ 2.058494] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 13:59:24.791 2025] [ 2.062485] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 13:59:24.791 2025] [ 2.066847] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 13:59:24.807 2025] [ 2.067738] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 13:59:24.822 2025] [ 2.068959] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 13:59:24.822 2025] [ 2.073022] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 13:59:24.838 2025] [ 2.078630] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 13:59:24.838 2025] [ 2.083858] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 13:59:24.854 2025] [ 2.089377] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 13:59:24.854 2025] [ 2.097288] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 13:59:24.859 2025] [ 2.103573] systemd[1]: Starting RPC Bind... [Fri Jan 03 13:59:24.859 2025] [ 2.104158] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 13:59:24.870 2025] [ 2.105536] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 13:59:24.885 2025] [ 2.105561] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 13:59:24.901 2025] [ 2.108969] systemd[1]: Starting Journal Service... [Fri Jan 03 13:59:24.901 2025] [ 2.112813] fuse: init (API version 7.37) [Fri Jan 03 13:59:24.901 2025] [ 2.120238] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 13:59:24.917 2025] [ 2.132872] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 13:59:24.917 2025] [ 2.137863] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 13:59:24.917 2025] [ 2.143920] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 13:59:24.932 2025] [ 2.143998] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 13:59:24.932 2025] [ 2.153211] cryptodev: driver 1.12 loaded. [Fri Jan 03 13:59:24.932 2025] [ 2.155211] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 13:59:24.948 2025] [ 2.175229] systemd[1]: Started RPC Bind. [Fri Jan 03 13:59:24.948 2025] [ 2.178332] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 13:59:24.959 2025] [ 2.182359] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 13:59:24.964 2025] [ 2.183448] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 13:59:24.964 2025] [ 2.184319] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 13:59:24.964 2025] [ 2.186866] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 13:59:24.980 2025] [ 2.190454] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 13:59:24.980 2025] [ 2.193979] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 13:59:24.995 2025] [ 2.198210] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 13:59:24.995 2025] [ 2.199046] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 13:59:24.995 2025] [ 2.202491] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 13:59:25.011 2025] [ 2.204066] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 13:59:25.011 2025] [ 2.205529] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 13:59:25.026 2025] [ 2.207941] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 13:59:25.026 2025] [ 2.214070] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 13:59:25.026 2025] [ 2.229814] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 13:59:25.042 2025] [ 2.235474] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 13:59:25.042 2025] [ 2.240574] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 13:59:25.058 2025] [ 2.251265] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 13:59:25.060 2025] [ 2.252936] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 13:59:25.060 2025] [ 2.253946] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 13:59:25.074 2025] [ 2.257328] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:59:25.074 2025] [ 2.257782] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 13:59:25.089 2025] [ 2.258199] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 13:59:25.105 2025] [ 2.277453] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 13:59:25.121 2025] [ 2.281902] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 13:59:25.121 2025] [ 2.301437] systemd[1]: Started Journal Service. [Fri Jan 03 13:59:25.136 2025] [ 2.334917] systemd-journald[194]: Received client request to flush runtime journal. [Fri Jan 03 13:59:25.341 2025] [ 2.736762] random: crng init done [Fri Jan 03 13:59:25.467 2025] [ 2.861173] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 13:59:25.467 2025] [ 2.861191] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 13:59:25.483 2025] [ 2.861209] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 13:59:25.483 2025] [ 2.861242] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 13:59:25.498 2025] [ 2.861261] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 13:59:25.514 2025] [ 2.865416] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 13:59:25.545 2025] [ 2.865432] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:59:25.561 2025] [ 2.865458] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:59:25.577 2025] [ 2.865484] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 13:59:25.592 2025] [ 2.865495] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 13:59:25.592 2025] [ 2.865499] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:59:25.592 2025] [ 2.865511] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:59:25.608 2025] [ 2.865522] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 13:59:25.638 2025] [ 2.865529] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 13:59:25.659 2025] [ 2.865533] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 13:59:25.667 2025] [ 2.865542] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 13:59:25.706 2025] [ 2.865555] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 13:59:25.733 2025] [ 2.882085] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 13:59:25.743 2025] [ 2.882103] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 13:59:25.760 2025] [ 2.882131] fram@0 enforce active low on chipselect handle [Fri Jan 03 13:59:25.766 2025] [ 2.882138] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 13:59:25.779 2025] [ 2.882165] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 13:59:25.787 2025] [ 2.889081] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 13:59:25.793 2025] [ 2.890877] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:29:43 UTC (1681064983) [Fri Jan 03 13:59:25.801 2025] [ 2.898967] systemd-journald[194]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 13:59:25.819 2025] [ 2.898989] systemd-journald[194]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 13:59:25.835 2025] [ 3.001347] mc: Linux media interface: v0.10 [Fri Jan 03 13:59:25.842 2025] [ 3.009484] videodev: Linux video capture interface: v2.00 [Fri Jan 03 13:59:25.848 2025] [ 3.081144] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 13:59:25.856 2025] [ 3.082764] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 13:59:25.864 2025] [ 3.082941] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 13:59:25.870 2025] [ 3.083252] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 13:59:25.877 2025] [ 3.084141] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:59:25.885 2025] [ 3.084170] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 13:59:25.892 2025] [ 3.084215] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 13:59:25.901 2025] [ 3.084221] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 13:59:25.907 2025] [ 3.245429] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 13:59:25.922 2025] [ 3.288589] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 13:59:25.929 2025] [ 3.288626] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 13:59:25.935 2025] [ 3.288632] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 13:59:25.941 2025] [ 3.288650] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:59:25.964 2025] [ 3.288684] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 13:59:25.998 2025] [ 3.288700] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 13:59:26.007 2025] [ 3.288820] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 13:59:26.014 2025] [ 3.312101] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 13:59:26.029 2025] [ 3.312275] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 13:59:26.043 2025] [ 3.312434] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:59:26.051 2025] [ 3.312869] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 13:59:26.057 2025] [ 3.312975] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 13:59:26.063 2025] [ 3.321230] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 13:59:26.069 2025] [ 3.321270] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 13:59:26.081 2025] [ 3.322143] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 13:59:26.086 2025] [ 3.322185] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 13:59:26.097 2025] [ 3.322192] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 13:59:26.109 2025] [ 3.322320] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 13:59:26.119 2025] [ 3.322514] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 13:59:26.127 2025] [ 3.495983] Init FPGA interrupt driver (1.0) [Fri Jan 03 13:59:26.131 2025] [ 3.496655] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 13:59:26.155 2025] [ 3.496689] Get kick_gpio number= (418) [Fri Jan 03 13:59:26.965 2025] [ 4.358915] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 13:59:27.032 2025] [ 4.426109] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 13:59:27.040 2025] [ 4.428298] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 13:59:27.049 2025] [ 4.428336] cfg80211: failed to load regulatory.db [Fri Jan 03 13:59:27.286 2025] [ 4.679250] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 13:59:27.306 2025] [ 4.679274] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 13:59:27.340 2025] [ 4.679292] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:59:27.378 2025] [ 4.679322] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 13:59:27.428 2025] [ 4.679336] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 13:59:27.435 2025] [ 4.679347] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 13:59:27.445 2025] [ 4.679569] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 13:59:27.456 2025] [ 4.711641] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 13:59:27.465 2025] [ 4.715786] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 13:59:27.472 2025] [ 4.729092] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:59:27.488 2025] [ 4.729133] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 13:59:27.537 2025] [ 4.931546] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 13:59:27.630 2025] [ 5.022760] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 13:59:27.630 2025] [ 5.022825] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 13:59:27.645 2025] [ 5.023039] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 13:59:27.645 2025] [ 5.023055] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 13:59:27.663 2025] [ 5.040306] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 13:59:27.677 2025] [ 5.054202] hub 1-0:1.0: USB hub found [Fri Jan 03 13:59:27.677 2025] [ 5.054255] hub 1-0:1.0: 1 port detected [Fri Jan 03 13:59:27.898 2025] [ 5.293814] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 13:59:27.976 2025] [ 5.369957] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 13:59:27.976 2025] [ 5.370004] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:28.055 2025] [ 5.457236] hub 1-1:1.0: USB hub found [Fri Jan 03 13:59:28.065 2025] [ 5.457415] hub 1-1:1.0: 4 ports detected [Fri Jan 03 13:59:28.118 2025] [ 5.514871] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 13:59:28.118 2025] [ 5.514925] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:28.133 2025] [ 5.539880] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 13:59:28.149 2025] [ 5.554955] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 13:59:28.165 2025] [ 5.554993] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:28.228 2025] [ 5.629317] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 13:59:28.228 2025] [ 5.633527] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:28.265 2025] [ 5.666743] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 13:59:28.306 2025] [ 5.710390] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 13:59:28.322 2025] [ 5.710424] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 13:59:28.668 2025] [ 6.062008] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 13:59:28.668 2025] [ 6.064647] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 13:59:28.888 2025] *************************************************************** [Fri Jan 03 13:59:28.888 2025] *************************************************************** [Fri Jan 03 13:59:28.888 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 13:59:28.904 2025] adwaita-icon-theme-symbolic [Fri Jan 03 13:59:28.904 2025] bash [Fri Jan 03 13:59:28.904 2025] cifs-utils [Fri Jan 03 13:59:28.904 2025] dosfstools [Fri Jan 03 13:59:28.904 2025] grub-common [Fri Jan 03 13:59:28.904 2025] grub-editenv [Fri Jan 03 13:59:28.904 2025] grub-efi [Fri Jan 03 13:59:28.904 2025] less [Fri Jan 03 13:59:28.904 2025] lib32-libgcc1 [Fri Jan 03 13:59:28.920 2025] lib32-libstdc++6 [Fri Jan 03 13:59:28.920 2025] libdw1 [Fri Jan 03 13:59:28.920 2025] libelf1 [Fri Jan 03 13:59:28.920 2025] libgcc1 [Fri Jan 03 13:59:28.920 2025] libgdbm-compat4 [Fri Jan 03 13:59:28.920 2025] libgdbm6 [Fri Jan 03 13:59:28.920 2025] libgmp10 [Fri Jan 03 13:59:28.920 2025] libidn2-0 [Fri Jan 03 13:59:28.920 2025] libreadline8 [Fri Jan 03 13:59:28.920 2025] libstdc++6 [Fri Jan 03 13:59:28.920 2025] libunistring2 [Fri Jan 03 13:59:28.920 2025] libvte-2.91-0 [Fri Jan 03 13:59:28.920 2025] nettle [Fri Jan 03 13:59:28.935 2025] onboard [Fri Jan 03 13:59:28.935 2025] parted [Fri Jan 03 13:59:28.935 2025] rxvt-unicode [Fri Jan 03 13:59:28.935 2025] [Fri Jan 03 13:59:28.935 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 13:59:28.935 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 13:59:28.935 2025] the opkg remove command. i.e.: [Fri Jan 03 13:59:28.951 2025] opkg remove [Fri Jan 03 13:59:28.951 2025] Where is the name printed in the list above [Fri Jan 03 13:59:28.951 2025] [Fri Jan 03 13:59:28.951 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 13:59:28.951 2025] will be notified of the dependent packages. You should [Fri Jan 03 13:59:28.967 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 13:59:28.967 2025] also remove the dependent packages as well [Fri Jan 03 13:59:28.967 2025] *************************************************************** [Fri Jan 03 13:59:28.982 2025] *************************************************************** [Fri Jan 03 13:59:33.862 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:59:33.867 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:59:34.049 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:59:34.054 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:59:34.230 2025] [ 11.620997] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:59:34.233 2025] [ 11.621025] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:59:34.239 2025] [ 11.621046] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.245 2025] [ 11.621102] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:59:34.251 2025] [ 11.621107] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:59:34.257 2025] [ 11.621115] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.263 2025] [ 11.621151] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:59:34.269 2025] [ 11.621156] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:59:34.275 2025] [ 11.621162] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.282 2025] [ 11.621198] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:59:34.288 2025] [ 11.621203] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:59:34.294 2025] [ 11.621210] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.300 2025] [ 11.621246] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:59:34.306 2025] [ 11.621251] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:59:34.312 2025] [ 11.621258] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.319 2025] [ 11.621292] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:59:34.325 2025] [ 11.621297] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:59:34.331 2025] [ 11.621304] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.337 2025] [ 11.621340] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:59:34.343 2025] [ 11.621344] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:59:34.349 2025] [ 11.621351] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.356 2025] [ 11.621385] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:59:34.362 2025] [ 11.621391] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:59:34.368 2025] [ 11.621399] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:34.396 2025] [Fri Jan 03 13:59:34.396 2025] _____ _____ _ _ [Fri Jan 03 13:59:34.400 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 13:59:34.405 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 13:59:34.410 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 13:59:34.415 2025] |___| |___| [Fri Jan 03 13:59:34.420 2025] [Fri Jan 03 13:59:34.420 2025] Arago Project am62xx-evm - [Fri Jan 03 13:59:34.423 2025] [Fri Jan 03 13:59:34.423 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 13:59:34.425 2025] [Fri Jan 03 13:59:34.425 2025] am62xx-evm login: [ 13.909556] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:59:36.513 2025] [ 13.909583] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:59:36.513 2025] [ 13.909599] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.529 2025] [ 13.909648] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:59:36.529 2025] [ 13.909653] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:59:36.544 2025] [ 13.909659] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.544 2025] [ 13.909693] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:59:36.544 2025] [ 13.909698] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:59:36.560 2025] [ 13.909785] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.560 2025] [ 13.909827] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:59:36.576 2025] [ 13.909833] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:59:36.576 2025] [ 13.909842] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.587 2025] [ 13.909880] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:59:36.592 2025] [ 13.909885] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:59:36.592 2025] [ 13.909893] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.607 2025] [ 13.909928] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:59:36.607 2025] [ 13.909935] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:59:36.607 2025] [ 13.909942] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.623 2025] [ 13.909976] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:59:36.623 2025] [ 13.909981] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:59:36.623 2025] [ 13.909988] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:36.639 2025] [ 13.910024] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:59:36.639 2025] [ 13.910029] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:59:36.654 2025] [ 13.910036] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:37.002 2025] [ 14.398003] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 13:59:40.291 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 13:59:40.298 2025] Using default runtime: v4.0.30319 [Fri Jan 03 13:59:42.076 2025] [ 19.471950] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:59:42.076 2025] [ 19.471980] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:59:42.092 2025] [ 19.472001] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.097 2025] [ 19.472057] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:59:42.097 2025] [ 19.472063] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:59:42.108 2025] [ 19.472070] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.108 2025] [ 19.472110] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:59:42.123 2025] [ 19.472115] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:59:42.123 2025] [ 19.472123] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.123 2025] [ 19.472159] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:59:42.139 2025] [ 19.472164] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:59:42.139 2025] [ 19.472172] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.155 2025] [ 19.472207] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:59:42.155 2025] [ 19.472212] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:59:42.155 2025] [ 19.472219] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.170 2025] [ 19.472259] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:59:42.170 2025] [ 19.472263] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:59:42.170 2025] [ 19.472271] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.186 2025] [ 19.472306] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:59:42.186 2025] [ 19.472311] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:59:42.202 2025] [ 19.472319] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.202 2025] [ 19.472353] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:59:42.218 2025] [ 19.472359] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:59:42.218 2025] [ 19.472366] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.218 2025] [ 19.545965] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 13:59:42.233 2025] [ 19.545997] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 13:59:42.233 2025] [ 19.546017] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.249 2025] [ 19.546076] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 13:59:42.249 2025] [ 19.546082] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 13:59:42.249 2025] [ 19.546089] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.264 2025] [ 19.546131] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 13:59:42.264 2025] [ 19.546136] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 13:59:42.264 2025] [ 19.546143] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.280 2025] [ 19.546177] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 13:59:42.280 2025] [ 19.546182] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 13:59:42.296 2025] [ 19.546189] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.298 2025] [ 19.546225] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 13:59:42.298 2025] [ 19.546230] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 13:59:42.312 2025] [ 19.546238] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.312 2025] [ 19.546273] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 13:59:42.312 2025] [ 19.546278] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 13:59:42.327 2025] [ 19.546285] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.327 2025] [ 19.546324] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 13:59:42.343 2025] [ 19.546329] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 13:59:42.343 2025] [ 19.546335] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 13:59:42.343 2025] [ 19.546369] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 13:59:42.359 2025] [ 19.546375] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 13:59:42.359 2025] [ 19.546381] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:14.717 2025] [Fri Jan 03 14:00:14.717 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:00:14.732 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:00:14.782 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:00:14.811 2025] Trying to boot from MMC1 [Fri Jan 03 14:00:14.968 2025] Authentication passed [Fri Jan 03 14:00:14.984 2025] Authentication passed [Fri Jan 03 14:00:14.984 2025] Authentication passed [Fri Jan 03 14:00:15.016 2025] Authentication passed [Fri Jan 03 14:00:15.031 2025] Authentication passed [Fri Jan 03 14:00:15.031 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:00:15.031 2025] [Fri Jan 03 14:00:15.031 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:00:15.047 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:00:15.346 2025] [Fri Jan 03 14:00:15.346 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:00:15.346 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:00:15.393 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:00:15.393 2025] Error: could not access storage. [Fri Jan 03 14:00:15.393 2025] Trying to boot from MMC1 [Fri Jan 03 14:00:15.566 2025] Authentication passed [Fri Jan 03 14:00:15.566 2025] Authentication passed [Fri Jan 03 14:00:16.210 2025] [Fri Jan 03 14:00:16.210 2025] [Fri Jan 03 14:00:16.210 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:00:16.226 2025] [Fri Jan 03 14:00:16.226 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:00:16.226 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:00:16.226 2025] DRAM: 2 GiB [Fri Jan 03 14:00:16.462 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:00:16.477 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:00:16.493 2025] Loading Environment from MMC... OK [Fri Jan 03 14:00:16.697 2025] In: serial [Fri Jan 03 14:00:16.697 2025] Out: serial [Fri Jan 03 14:00:16.697 2025] Err: serial [Fri Jan 03 14:00:16.697 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:00:16.697 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:00:16.870 2025] switch to partitions #0, OK [Fri Jan 03 14:00:16.870 2025] mmc0(part 0) is current device [Fri Jan 03 14:00:17.012 2025] SD/MMC found on device 0 [Fri Jan 03 14:00:17.012 2025] Running eMMC boot ... [Fri Jan 03 14:00:17.027 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:00:17.043 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:00:17.043 2025] Importing environment from mmc0 ... [Fri Jan 03 14:00:17.263 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:00:17.294 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:00:17.294 2025] Working FDT set to 88000000 [Fri Jan 03 14:00:17.294 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:00:17.294 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:00:17.310 2025] Working FDT set to 88000000 [Fri Jan 03 14:00:17.326 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:00:17.341 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:00:17.341 2025] Working FDT set to 8feed000 [Fri Jan 03 14:00:17.357 2025] [Fri Jan 03 14:00:17.357 2025] Starting kernel ... [Fri Jan 03 14:00:17.357 2025] [Fri Jan 03 14:00:17.389 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:00:17.389 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:00:17.420 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:00:17.420 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:00:17.514 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:00:17.514 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:00:17.514 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:00:17.530 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:00:17.545 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:00:17.545 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:00:17.545 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:00:17.561 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:00:17.577 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:00:17.577 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:00:17.593 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:00:17.593 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:00:17.612 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:00:17.620 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:00:17.629 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:00:17.635 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:00:17.641 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:00:17.645 2025] [ 0.000000] Normal empty [Fri Jan 03 14:00:17.650 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:00:17.655 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:00:17.660 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:00:17.665 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:00:17.670 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:00:17.674 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:00:17.680 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:00:17.686 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:00:17.692 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:00:17.697 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:00:17.704 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:00:17.710 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:00:17.716 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:00:17.722 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:00:17.727 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:00:17.733 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:00:17.738 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:00:17.746 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:00:17.751 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:00:17.756 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:00:17.761 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:00:17.767 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:00:17.773 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:00:17.780 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:00:17.785 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:00:17.830 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:00:17.840 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:00:17.847 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:00:17.855 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:00:17.863 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:00:17.879 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:00:17.885 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:00:17.891 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:00:17.899 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:00:17.905 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:00:17.910 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:00:17.917 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:00:17.923 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:00:17.929 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:00:17.935 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:00:17.940 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:00:17.945 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:00:17.952 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:00:17.956 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:00:17.962 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:00:17.966 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:00:17.971 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:00:17.977 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:00:17.985 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:00:17.991 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:00:17.997 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:00:18.004 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:00:18.009 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:00:18.017 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:00:18.024 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:00:18.035 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:00:18.042 2025] [ 0.000249] Console: colour dummy device 80x25 [Fri Jan 03 14:00:18.053 2025] [ 0.528886] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:00:18.059 2025] [ 0.528897] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:00:18.066 2025] [ 0.528981] LSM: Security Framework initializing [Fri Jan 03 14:00:18.071 2025] [ 0.529117] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:00:18.077 2025] [ 0.529141] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:00:18.084 2025] [ 0.530841] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:00:18.090 2025] [ 0.530848] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:00:18.098 2025] [ 0.530893] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:00:18.104 2025] [ 0.583349] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:00:18.110 2025] [ 0.583603] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:00:18.117 2025] [ 0.583688] EFI services will not be available. [Fri Jan 03 14:00:18.122 2025] [ 0.583944] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:00:18.128 2025] [ 0.584717] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:00:18.134 2025] [ 0.584828] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:00:18.140 2025] [ 0.584845] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:00:18.145 2025] [ 0.584903] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:00:18.156 2025] [ 0.634985] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:00:18.157 2025] [ 0.635076] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:00:18.164 2025] [ 0.635087] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:00:18.171 2025] [ 0.635121] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:00:18.182 2025] [ 0.660987] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:00:18.184 2025] [ 0.661069] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:00:18.191 2025] [ 0.661081] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:00:18.198 2025] [ 0.661114] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:00:18.205 2025] [ 0.661170] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:00:18.210 2025] [ 0.661176] SMP: Total of 4 processors activated. [Fri Jan 03 14:00:18.216 2025] [ 0.695361] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:00:18.222 2025] [ 0.695365] CPU features: detected: CRC32 instructions [Fri Jan 03 14:00:18.227 2025] [ 0.695411] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:00:18.232 2025] [ 0.695414] alternatives: applying system-wide alternatives [Fri Jan 03 14:00:18.238 2025] [ 0.696924] devtmpfs: initialized [Fri Jan 03 14:00:18.242 2025] [ 0.708569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:00:18.247 2025] [ 0.708596] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:00:18.255 2025] [ 0.713729] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:00:18.261 2025] [ 0.714536] DMI not present or invalid. [Fri Jan 03 14:00:18.267 2025] [ 0.715070] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:00:18.272 2025] [ 0.729129] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:00:18.278 2025] [ 0.729411] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:00:18.286 2025] [ 0.729603] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:00:18.292 2025] [ 0.729746] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:00:18.300 2025] [ 0.729937] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:00:18.307 2025] [ 0.730569] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:00:18.313 2025] [ 0.730575] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:00:18.319 2025] [ 0.730820] ASID allocator initialised with 65536 entries [Fri Jan 03 14:00:18.325 2025] [ 0.745740] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:00:18.332 2025] [ 0.754932] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:00:18.339 2025] [ 0.754943] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:00:18.346 2025] [ 0.754948] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:00:18.353 2025] [ 0.754950] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:00:18.360 2025] [ 0.754954] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:00:18.366 2025] [ 0.754956] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:00:18.373 2025] [ 0.754960] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:00:18.379 2025] [ 0.754963] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:00:18.385 2025] [ 0.756114] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:00:18.394 2025] [ 0.756618] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:00:18.401 2025] [ 0.756625] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:00:18.408 2025] [ 0.756639] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:00:18.417 2025] [ 0.756653] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:00:18.425 2025] [ 0.756664] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.434 2025] [ 0.756670] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:00:18.441 2025] [ 0.756887] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:00:18.448 2025] [ 0.756892] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:00:18.455 2025] [ 0.756902] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:00:18.467 2025] [ 0.756914] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:00:18.470 2025] [ 0.756922] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.478 2025] [ 0.756926] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:00:18.486 2025] [ 0.757184] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:00:18.493 2025] [ 0.757189] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:00:18.500 2025] [ 0.757198] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:00:18.509 2025] [ 0.757210] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:00:18.517 2025] [ 0.757218] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.525 2025] [ 0.757222] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:00:18.532 2025] [ 0.757436] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:00:18.540 2025] [ 0.757441] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:00:18.547 2025] [ 0.757454] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:00:18.558 2025] [ 1.037065[] printk: console [ttyS2] printing thread started [Fri Jan 03 14:00:18.560 2025] 0.757467] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:00:18.574 2025] [ 1.037080] printk: console [ttyS2] enabled [Fri Jan 03 14:00:18.575 2025] [ 1.037084] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:00:18.583 2025] [ 1.051176] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:00:18.589 2025] [ 1.052409] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:00:18.594 2025] [ 1.052419] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:00:18.600 2025] [ 1.052431] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:00:18.609 2025] [ 1.052449] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:00:18.619 2025] [ 1.052462] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.626 2025] [ 1.052467] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:00:18.632 2025] [ 1.052497] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:00:18.641 2025] [ 1.053439] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:00:18.648 2025] [ 1.053448] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:00:18.654 2025] [ 1.053459] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:00:18.662 2025] [ 1.053473] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:00:18.671 2025] [ 1.053483] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.678 2025] [ 1.053487] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:00:18.688 2025] [ 1.056543] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:00:18.692 2025] [ 1.063630] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:00:18.699 2025] [ 1.070217] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:00:18.705 2025] [ 1.070651] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:00:18.711 2025] [ 1.070657] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:00:18.718 2025] [ 1.070674] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:00:18.729 2025] [ 1.070691] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:00:18.744 2025] [ 1.070704] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.747 2025] [ 1.070710] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:00:18.753 2025] [ 1.104068] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:00:18.764 2025] [ 1.104358] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:00:18.767 2025] [ 1.105190] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:00:18.776 2025] [ 1.105198] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:00:18.779 2025] [ 1.105210] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:00:18.791 2025] [ 1.105233] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:00:18.804 2025] [ 1.105251] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.811 2025] [ 1.105256] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:00:18.819 2025] [ 1.105989] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:00:18.825 2025] [ 1.106031] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:00:18.837 2025] [ 1.106296] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:00:18.844 2025] [ 1.106308] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:00:18.851 2025] [ 1.106313] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:00:18.858 2025] [ 1.107081] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:00:18.869 2025] [ 1.123605] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:00:18.872 2025] [ 1.128402] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:00:18.881 2025] [ 1.128440] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:00:18.888 2025] [ 1.128447] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:00:18.894 2025] [ 1.128459] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:00:18.903 2025] [ 1.128480] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:00:18.913 2025] [ 1.128491] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.923 2025] [ 1.128495] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:00:18.926 2025] [ 1.129601] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:00:18.931 2025] [ 1.129618] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:00:18.938 2025] [ 1.129632] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:00:18.951 2025] [ 1.129661] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:00:18.957 2025] [ 1.129673] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:00:18.964 2025] [ 1.129678] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:00:18.974 2025] [ 1.129683] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:00:18.977 2025] [ 1.129687] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:00:18.984 2025] [ 1.129696] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:00:18.992 2025] [ 1.129708] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:00:19.001 2025] [ 1.129718] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:00:19.013 2025] [ 1.129722] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:00:19.019 2025] [ 1.129805] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:00:19.024 2025] [ 1.129811] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:00:19.032 2025] [ 1.129821] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:00:19.037 2025] [ 1.129835] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:00:19.047 2025] [ 1.129843] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:00:19.054 2025] [ 1.129847] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:00:19.061 2025] [ 1.130348] mmc0: CQHCI version 5.10 [Fri Jan 03 14:00:19.068 2025] [ 1.130365] mmc2: CQHCI version 5.10 [Fri Jan 03 14:00:19.068 2025] [ 1.130370] mmc1: CQHCI version 5.10 [Fri Jan 03 14:00:19.073 2025] [ 1.132909] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:00:19.080 2025] [ 1.135423] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:00:19.092 2025] [ 1.138431] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:00:19.095 2025] [ 1.138642] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:00:19.101 2025] [ 1.138701] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:00:19.123 2025] [ 1.141801] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:00:19.128 2025] [ 1.142023] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:00:19.135 2025] [ 1.142103] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:00:19.141 2025] [ 1.143714] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:00:19.154 2025] [ 1.143722] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:00:19.157 2025] [ 1.143742] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:00:19.168 2025] [ 1.143759] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:00:19.175 2025] [ 1.143777] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:00:19.178 2025] [ 1.143781] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:00:19.185 2025] [ 1.143791] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:00:19.193 2025] [ 1.143802] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:00:19.202 2025] [ 1.143811] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:00:19.210 2025] [ 1.143816] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:00:19.215 2025] [ 1.144259] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:00:19.222 2025] [ 1.144264] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:00:19.233 2025] [ 1.144277] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:00:19.237 2025] [ 1.144287] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:00:19.249 2025] [ 1.144292] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:00:19.251 2025] [ 1.144785] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:00:19.258 2025] [ 1.144800] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:00:19.265 2025] [ 1.144803] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:00:19.271 2025] [ 1.144894] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:00:19.282 2025] [ 1.144906] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:00:19.285 2025] [ 1.144909] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:00:19.291 2025] [ 1.144970] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:00:19.299 2025] [ 1.144980] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:00:19.306 2025] [ 1.144984] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:00:19.314 2025] [ 1.145679] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:00:19.320 2025] [ 1.148486] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:00:19.326 2025] [ 1.160659] ALSA device list: [Fri Jan 03 14:00:19.331 2025] [ 1.160670] No soundcards found. [Fri Jan 03 14:00:19.336 2025] [ 1.164828] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:00:19.342 2025] [ 1.168489] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:00:19.348 2025] [ 1.181077] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:00:19.353 2025] [ 1.181252] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:00:19.361 2025] [ 1.227160] mmc1: new MMC card at address 0001 [Fri Jan 03 14:00:19.368 2025] [ 1.227992] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:00:19.373 2025] [ 1.236042] mmcblk1: p1 [Fri Jan 03 14:00:19.378 2025] [ 1.236823] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:00:19.383 2025] [ 1.238508] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:00:19.387 2025] [ 1.239820] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:00:19.393 2025] [ 1.319938] mmc0: Command Queue Engine enabled [Fri Jan 03 14:00:19.398 2025] [ 1.319956] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:00:19.402 2025] [ 1.320734] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:00:19.408 2025] [ 1.324735] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:00:19.413 2025] [ 1.325884] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:00:19.418 2025] [ 1.327343] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:00:19.422 2025] [ 1.328556] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:00:19.427 2025] [ 1.343663] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:00:19.433 2025] [ 1.344085] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:19.439 2025] [ 1.344171] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:00:19.444 2025] [ 1.344396] devtmpfs: mounted [Fri Jan 03 14:00:19.449 2025] [ 1.345786] Freeing unused kernel memory: 1856K [Fri Jan 03 14:00:19.454 2025] [ 1.355135] Run /sbin/init as init process [Fri Jan 03 14:00:19.459 2025] [ 1.355143] with arguments: [Fri Jan 03 14:00:19.464 2025] [ 1.355145] /sbin/init [Fri Jan 03 14:00:19.464 2025] [ 1.355146] with environment: [Fri Jan 03 14:00:19.469 2025] [ 1.355148] HOME=/ [Fri Jan 03 14:00:19.469 2025] [ 1.355150] TERM=linux [Fri Jan 03 14:00:19.475 2025] [ 1.355151] syntec_extend= [Fri Jan 03 14:00:19.475 2025] [ 1.446509] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:00:19.481 2025] [ 1.472813] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:00:19.485 2025] [ 1.473998] Segment Routing with IPv6 [Fri Jan 03 14:00:19.490 2025] [ 1.474030] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:00:19.495 2025] [ 1.492006] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:00:19.522 2025] [ 1.492613] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:00:19.527 2025] [ 1.495799] systemd[1]: Hostname set to . [Fri Jan 03 14:00:19.534 2025] [ 1.633472] systemd-sysv-generator[184]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:00:19.555 2025] [ 1.938557] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:00:19.574 2025] [ 1.941368] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:00:19.592 2025] [ 2.004030] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:00:19.598 2025] [ 2.007398] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:00:19.598 2025] [ 2.008951] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:00:19.598 2025] [ 2.009527] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:00:19.614 2025] [ 2.009894] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:00:19.614 2025] [ 2.010157] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:00:19.629 2025] [ 2.010563] systemd[1]: Reached target Path Units. [Fri Jan 03 14:00:19.629 2025] [ 2.010665] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:00:19.629 2025] [ 2.010734] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:00:19.645 2025] [ 2.010824] systemd[1]: Reached target Swaps. [Fri Jan 03 14:00:19.645 2025] [ 2.015060] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:00:19.645 2025] [ 2.015245] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:00:19.661 2025] [ 2.021270] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:00:19.661 2025] [ 2.021717] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:00:19.676 2025] [ 2.022538] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:00:19.676 2025] [ 2.023111] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:00:19.676 2025] [ 2.023725] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:00:19.692 2025] [ 2.024591] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:00:19.692 2025] [ 2.026459] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:00:19.692 2025] [ 2.026954] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:00:19.708 2025] [ 2.027466] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:00:19.708 2025] [ 2.073836] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:00:19.724 2025] [ 2.077972] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:00:19.739 2025] [ 2.082597] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:00:19.739 2025] [ 2.083421] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:00:19.755 2025] [ 2.084780] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:00:19.755 2025] [ 2.088805] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:00:19.770 2025] [ 2.094206] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:00:19.770 2025] [ 2.100841] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:00:19.786 2025] [ 2.106554] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:00:19.791 2025] [ 2.111587] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:00:19.791 2025] [ 2.119408] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:00:19.802 2025] [ 2.119927] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:00:19.818 2025] [ 2.121622] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:00:19.833 2025] [ 2.121654] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:00:19.833 2025] [ 2.123132] fuse: init (API version 7.37) [Fri Jan 03 14:00:19.833 2025] [ 2.125620] systemd[1]: Starting Journal Service... [Fri Jan 03 14:00:19.849 2025] [ 2.134545] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:00:19.849 2025] [ 2.140171] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:00:19.849 2025] [ 2.146603] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:00:19.865 2025] [ 2.159218] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:00:19.865 2025] [ 2.166299] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:00:19.865 2025] [ 2.168256] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:00:19.880 2025] [ 2.191955] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:00:19.880 2025] [ 2.197336] systemd[1]: Started RPC Bind. [Fri Jan 03 14:00:19.891 2025] [ 2.208515] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:00:19.896 2025] [ 2.209558] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:00:19.896 2025] [ 2.210523] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:00:19.912 2025] [ 2.211473] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:00:19.912 2025] [ 2.212933] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:00:19.912 2025] [ 2.213107] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:00:19.928 2025] [ 2.216995] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:00:19.928 2025] [ 2.217659] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:00:19.928 2025] [ 2.219012] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:00:19.943 2025] [ 2.219872] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:00:19.943 2025] [ 2.224299] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:00:19.959 2025] [ 2.224879] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:00:19.959 2025] [ 2.226120] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:00:19.959 2025] [ 2.227272] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:00:19.974 2025] [ 2.243502] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:00:19.974 2025] [ 2.248804] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:00:19.990 2025] [ 2.253830] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:00:19.992 2025] [ 2.268595] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:00:19.992 2025] [ 2.275265] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:00:20.006 2025] [ 2.278594] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:00:20.006 2025] [ 2.281496] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:00:20.006 2025] [ 2.290220] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:00:20.022 2025] [ 2.290542] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:00:20.037 2025] [ 2.290902] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:00:20.053 2025] [ 2.322442] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:00:20.053 2025] [ 2.328938] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:00:20.069 2025] [ 2.329903] systemd[1]: Started Journal Service. [Fri Jan 03 14:00:20.069 2025] [ 2.366337] systemd-journald[194]: Received client request to flush runtime journal. [Fri Jan 03 14:00:20.289 2025] [ 2.768693] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:00:20.293 2025] [ 2.768710] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:00:20.305 2025] [ 2.768724] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:00:20.336 2025] [ 2.768755] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:00:20.393 2025] [ 2.768774] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:00:20.414 2025] [ 2.781635] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:00:20.414 2025] [ 2.781651] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:00:20.430 2025] [ 2.781685] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:00:20.461 2025] [ 2.781709] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:00:20.461 2025] [ 2.781723] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:00:20.493 2025] [ 2.781728] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:00:20.493 2025] [ 2.781738] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:00:20.524 2025] [ 2.781752] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:00:20.524 2025] [ 2.781760] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:00:20.540 2025] [ 2.781763] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:00:20.556 2025] [ 2.781774] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:00:20.571 2025] [ 2.781785] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:00:20.593 2025] [ 2.796206] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:00:20.603 2025] [ 2.796225] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:00:20.619 2025] [ 2.796260] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:00:20.634 2025] [ 2.796263] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:00:20.665 2025] [ 2.796297] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:00:20.681 2025] [ 2.856647] mc: Linux media interface: v0.10 [Fri Jan 03 14:00:20.697 2025] [ 2.864541] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:00:20.697 2025] [ 2.889710] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:00:20.697 2025] [ 2.891207] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:30:38 UTC (1681065038) [Fri Jan 03 14:00:20.713 2025] [ 2.892401] systemd-journald[194]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:00:20.744 2025] [ 2.892426] systemd-journald[194]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:00:20.760 2025] [ 2.974596] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:00:20.775 2025] [ 2.974903] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:00:20.807 2025] [ 2.979389] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:00:20.823 2025] [ 2.979774] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:00:20.823 2025] [ 2.981693] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:00:20.838 2025] [ 2.981735] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:00:20.885 2025] [ 2.981791] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:00:20.901 2025] [ 2.981801] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:00:20.917 2025] [ 3.108833] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:00:20.932 2025] [ 3.108862] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:00:20.948 2025] [ 3.108872] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:00:20.964 2025] [ 3.108891] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:00:20.964 2025] [ 3.108917] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:00:20.979 2025] [ 3.108935] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:00:20.995 2025] [ 3.108945] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:00:21.011 2025] [ 3.135258] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:00:21.011 2025] [ 3.151882] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:00:21.027 2025] [ 3.152118] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:00:21.027 2025] [ 3.152302] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:00:21.042 2025] [ 3.155257] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:00:21.042 2025] [ 3.155349] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:00:21.058 2025] [ 3.166008] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:00:21.058 2025] [ 3.166107] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:00:21.073 2025] [ 3.166923] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:00:21.073 2025] [ 3.166970] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:00:21.089 2025] [ 3.166978] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:00:21.095 2025] [ 3.177810] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:00:21.152 2025] [ 3.178111] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:00:21.168 2025] [ 3.290303] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:00:21.168 2025] [ 3.290947] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:00:21.168 2025] [ 3.290976] Get kick_gpio number= (418) [Fri Jan 03 14:00:21.420 2025] [ 3.912137] random: crng init done [Fri Jan 03 14:00:21.530 2025] [ 4.020029] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:00:21.546 2025] [ 4.020083] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:00:21.546 2025] [ 4.020102] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:00:21.561 2025] [ 4.020125] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:00:21.596 2025] [ 4.020140] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:00:21.619 2025] [ 4.020146] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:00:21.624 2025] [ 4.020330] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:00:21.633 2025] [ 4.112532] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:00:21.656 2025] [ 4.115139] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:00:21.730 2025] [ 4.210027] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:00:21.797 2025] [ 4.274943] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:00:21.806 2025] [ 4.275004] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:00:21.814 2025] [ 4.281379] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:00:21.821 2025] [ 4.281401] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:00:21.834 2025] [ 4.297519] xhci-hcd xhci-hcd.4.auto: irq 464, io mem 0x31100000 [Fri Jan 03 14:00:21.836 2025] [ 4.305872] hub 1-0:1.0: USB hub found [Fri Jan 03 14:00:21.846 2025] [ 4.305931] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:00:22.071 2025] [ 4.550145] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:00:22.234 2025] [ 4.714310] hub 1-1:1.0: USB hub found [Fri Jan 03 14:00:22.240 2025] [ 4.719002] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:00:22.668 2025] [ 5.149515] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:00:22.700 2025] [ 5.179247] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:00:22.709 2025] [ 5.190400] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:00:22.718 2025] [ 5.190445] cfg80211: failed to load regulatory.db [Fri Jan 03 14:00:22.837 2025] [ 5.315692] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:00:22.843 2025] [ 5.315725] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:00:22.855 2025] [ 5.329931] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:00:22.857 2025] [ 5.329977] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:22.865 2025] [ 5.334258] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:00:22.871 2025] [ 5.334297] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:22.898 2025] [ 5.377599] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:00:22.916 2025] [ 5.398577] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:00:22.925 2025] [ 5.398614] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:22.956 2025] [ 5.437533] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:00:22.965 2025] [ 5.437972] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:23.285 2025] [ 5.766399] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:00:23.292 2025] [ 5.767740] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:00:23.423 2025] [ 5.904677] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:00:23.463 2025] [ 5.944634] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:00:23.472 2025] [ 5.944677] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:00:23.818 2025] *************************************************************** [Fri Jan 03 14:00:23.818 2025] *************************************************************** [Fri Jan 03 14:00:23.818 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:00:23.833 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:00:23.833 2025] bash [Fri Jan 03 14:00:23.833 2025] cifs-utils [Fri Jan 03 14:00:23.833 2025] dosfstools [Fri Jan 03 14:00:23.833 2025] grub-common [Fri Jan 03 14:00:23.833 2025] grub-editenv [Fri Jan 03 14:00:23.849 2025] grub-efi [Fri Jan 03 14:00:23.849 2025] less [Fri Jan 03 14:00:23.849 2025] lib32-libgcc1 [Fri Jan 03 14:00:23.849 2025] lib32-libstdc++6 [Fri Jan 03 14:00:23.849 2025] libdw1 [Fri Jan 03 14:00:23.849 2025] libelf1 [Fri Jan 03 14:00:23.849 2025] libgcc1 [Fri Jan 03 14:00:23.849 2025] libgdbm-compat4 [Fri Jan 03 14:00:23.849 2025] libgdbm6 [Fri Jan 03 14:00:23.849 2025] libgmp10 [Fri Jan 03 14:00:23.849 2025] libidn2-0 [Fri Jan 03 14:00:23.849 2025] libreadline8 [Fri Jan 03 14:00:23.849 2025] libstdc++6 [Fri Jan 03 14:00:23.849 2025] libunistring2 [Fri Jan 03 14:00:23.864 2025] libvte-2.91-0 [Fri Jan 03 14:00:23.864 2025] nettle [Fri Jan 03 14:00:23.864 2025] onboard [Fri Jan 03 14:00:23.864 2025] parted [Fri Jan 03 14:00:23.864 2025] rxvt-unicode [Fri Jan 03 14:00:23.864 2025] [Fri Jan 03 14:00:23.864 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:00:23.864 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:00:23.880 2025] the opkg remove command. i.e.: [Fri Jan 03 14:00:23.880 2025] opkg remove [Fri Jan 03 14:00:23.880 2025] Where is the name printed in the list above [Fri Jan 03 14:00:23.880 2025] [Fri Jan 03 14:00:23.880 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:00:23.880 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:00:23.896 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:00:23.902 2025] also remove the dependent packages as well [Fri Jan 03 14:00:23.902 2025] *************************************************************** [Fri Jan 03 14:00:23.912 2025] *************************************************************** [Fri Jan 03 14:00:29.440 2025] [Fri Jan 03 14:00:29.440 2025] _____ _____ _ _ [Fri Jan 03 14:00:29.455 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:00:29.455 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:00:29.471 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:00:29.471 2025] |___| |___| [Fri Jan 03 14:00:29.471 2025] [Fri Jan 03 14:00:29.471 2025] Arago Project am62xx-evm - [Fri Jan 03 14:00:29.471 2025] [Fri Jan 03 14:00:29.471 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:00:29.486 2025] [Fri Jan 03 14:00:29.486 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:00:29.724 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:00:29.912 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:00:29.919 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:00:30.092 2025] [ 12.573807] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:00:30.098 2025] [ 12.573830] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:00:30.104 2025] [ 12.573850] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.111 2025] [ 12.573910] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:00:30.116 2025] [ 12.573915] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:00:30.123 2025] [ 12.573922] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.129 2025] [ 12.573964] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:00:30.135 2025] [ 12.573969] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:00:30.141 2025] [ 12.573976] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.148 2025] [ 12.574011] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:00:30.153 2025] [ 12.574019] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:00:30.160 2025] [ 12.574026] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.166 2025] [ 12.574181] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:00:30.172 2025] [ 12.574189] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:00:30.178 2025] [ 12.574198] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.184 2025] [ 12.574244] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:00:30.190 2025] [ 12.574249] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:00:30.197 2025] [ 12.574257] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.203 2025] [ 12.574293] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:00:30.209 2025] [ 12.574298] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:00:30.215 2025] [ 12.574309] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:30.221 2025] [ 12.574342] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:00:30.230 2025] [ 12.574347] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:00:30.233 2025] [ 12.574354] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.377 2025] [ 14.857389] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:00:32.385 2025] [ 14.857412] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:00:32.391 2025] [ 14.857428] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.395 2025] [ 14.857480] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:00:32.400 2025] [ 14.857484] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:00:32.407 2025] [ 14.857491] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.413 2025] [ 14.857527] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:00:32.420 2025] [ 14.857532] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:00:32.426 2025] [ 14.857538] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.431 2025] [ 14.857571] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:00:32.437 2025] [ 14.857576] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:00:32.445 2025] [ 14.857582] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.450 2025] [ 14.857617] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:00:32.456 2025] [ 14.857622] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:00:32.462 2025] [ 14.857629] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.468 2025] [ 14.857666] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:00:32.473 2025] [ 14.857671] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:00:32.480 2025] [ 14.857677] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.485 2025] [ 14.857710] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:00:32.492 2025] [ 14.857715] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:00:32.497 2025] [ 14.857722] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.503 2025] [ 14.857756] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:00:32.509 2025] [ 14.857761] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:00:32.515 2025] [ 14.857767] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:32.866 2025] [ 15.346643] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:00:36.143 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:00:36.149 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:00:37.928 2025] [ 20.421070] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:00:37.945 2025] [ 20.421094] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:00:37.945 2025] [ 20.421114] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:37.945 2025] [ 20.421171] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:00:37.960 2025] [ 20.421177] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:00:37.960 2025] [ 20.421191] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:37.975 2025] [ 20.421229] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:00:37.975 2025] [ 20.421234] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:00:37.975 2025] [ 20.421241] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:37.991 2025] [ 20.421280] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:00:37.991 2025] [ 20.421286] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:00:38.007 2025] [ 20.421294] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.007 2025] [ 20.421327] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:00:38.022 2025] [ 20.421333] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:00:38.022 2025] [ 20.421340] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.022 2025] [ 20.421374] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:00:38.038 2025] [ 20.421379] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:00:38.045 2025] [ 20.421386] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.045 2025] [ 20.421420] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:00:38.054 2025] [ 20.421429] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:00:38.054 2025] [ 20.421436] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.069 2025] [ 20.421469] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:00:38.069 2025] [ 20.421474] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:00:38.069 2025] [ 20.421481] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.085 2025] [ 20.509509] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:00:38.085 2025] [ 20.509561] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:00:38.085 2025] [ 20.509588] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.101 2025] [ 20.509711] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:00:38.101 2025] [ 20.509719] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:00:38.116 2025] [ 20.509744] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.116 2025] [ 20.509809] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:00:38.132 2025] [ 20.509815] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:00:38.132 2025] [ 20.509822] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.132 2025] [ 20.509885] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:00:38.148 2025] [ 20.509891] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:00:38.148 2025] [ 20.509898] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.148 2025] [ 20.509962] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:00:38.164 2025] [ 20.509968] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:00:38.164 2025] [ 20.509976] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.164 2025] [ 20.510121] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:00:38.179 2025] [ 20.510130] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:00:38.179 2025] [ 20.510145] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.195 2025] [ 20.510220] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:00:38.195 2025] [ 20.510242] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:00:38.195 2025] [ 20.510251] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:00:38.211 2025] [ 20.510311] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:00:38.211 2025] [ 20.510317] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:00:38.226 2025] [ 20.510326] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:10.669 2025] [Fri Jan 03 14:01:10.669 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:01:10.689 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:01:10.739 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:01:10.760 2025] Trying to boot from MMC1 [Fri Jan 03 14:01:10.935 2025] Authentication passed [Fri Jan 03 14:01:10.942 2025] Authentication passed [Fri Jan 03 14:01:10.945 2025] Authentication passed [Fri Jan 03 14:01:10.981 2025] Authentication passed [Fri Jan 03 14:01:10.988 2025] Authentication passed [Fri Jan 03 14:01:10.993 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:01:10.995 2025] [Fri Jan 03 14:01:10.999 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:01:11.003 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:01:11.296 2025] [Fri Jan 03 14:01:11.296 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:01:11.302 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:01:11.343 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:01:11.348 2025] Error: could not access storage. [Fri Jan 03 14:01:11.352 2025] Trying to boot from MMC1 [Fri Jan 03 14:01:11.507 2025] Authentication passed [Fri Jan 03 14:01:11.516 2025] Authentication passed [Fri Jan 03 14:01:12.161 2025] [Fri Jan 03 14:01:12.161 2025] [Fri Jan 03 14:01:12.161 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:01:12.165 2025] [Fri Jan 03 14:01:12.165 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:01:12.165 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:01:12.165 2025] DRAM: 2 GiB [Fri Jan 03 14:01:12.408 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:01:12.408 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:01:12.424 2025] Loading Environment from MMC... OK [Fri Jan 03 14:01:12.628 2025] In: serial [Fri Jan 03 14:01:12.628 2025] Out: serial [Fri Jan 03 14:01:12.628 2025] Err: serial [Fri Jan 03 14:01:12.628 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:01:12.628 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:01:12.786 2025] switch to partitions #0, OK [Fri Jan 03 14:01:12.786 2025] mmc0(part 0) is current device [Fri Jan 03 14:01:12.942 2025] SD/MMC found on device 0 [Fri Jan 03 14:01:12.942 2025] Running eMMC boot ... [Fri Jan 03 14:01:12.964 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:01:12.964 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:01:12.974 2025] Importing environment from mmc0 ... [Fri Jan 03 14:01:13.195 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:01:13.211 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:01:13.211 2025] Working FDT set to 88000000 [Fri Jan 03 14:01:13.226 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:01:13.226 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:01:13.226 2025] Working FDT set to 88000000 [Fri Jan 03 14:01:13.257 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:01:13.264 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:01:13.264 2025] Working FDT set to 8feed000 [Fri Jan 03 14:01:13.273 2025] [Fri Jan 03 14:01:13.273 2025] Starting kernel ... [Fri Jan 03 14:01:13.273 2025] [Fri Jan 03 14:01:13.305 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:01:13.320 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:01:13.336 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:01:13.336 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:01:13.430 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:01:13.446 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:01:13.446 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:01:13.446 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:01:13.465 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:01:13.465 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:01:13.477 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:01:13.477 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:01:13.493 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:01:13.509 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:01:13.509 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:01:13.524 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:01:13.524 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:01:13.540 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:01:13.540 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:01:13.556 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:01:13.556 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:01:13.565 2025] [ 0.000000] Normal empty [Fri Jan 03 14:01:13.572 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:01:13.572 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:01:13.572 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:01:13.572 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:01:13.587 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:01:13.587 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:01:13.604 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:01:13.610 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:01:13.616 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:01:13.622 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:01:13.628 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:01:13.634 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:01:13.640 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:01:13.649 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:01:13.651 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:01:13.656 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:01:13.662 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:01:13.667 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:01:13.672 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:01:13.677 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:01:13.684 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:01:13.689 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:01:13.696 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:01:13.700 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:01:13.707 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:01:13.754 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:01:13.763 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:01:13.770 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:01:13.779 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:01:13.785 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:01:13.802 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:01:13.809 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:01:13.815 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:01:13.821 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:01:13.828 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:01:13.834 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:01:13.840 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:01:13.845 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:01:13.852 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:01:13.858 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:01:13.863 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:01:13.869 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:01:13.874 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:01:13.878 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:01:13.884 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:01:13.889 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:01:13.892 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:01:13.899 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:01:13.909 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:01:13.915 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:01:13.921 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:01:13.927 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:01:13.933 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:01:13.940 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:01:13.947 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:01:13.957 2025] [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:01:13.966 2025] [ 0.000250] Console: colour dummy device 80x25 [Fri Jan 03 14:01:13.971 2025] [ 0.528887] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:01:13.982 2025] [ 0.528897] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:01:13.988 2025] [ 0.528982] LSM: Security Framework initializing [Fri Jan 03 14:01:13.994 2025] [ 0.529119] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:01:14.000 2025] [ 0.529142] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:01:14.008 2025] [ 0.530826] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:01:14.014 2025] [ 0.530833] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:01:14.020 2025] [ 0.530878] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:01:14.026 2025] [ 0.583340] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:01:14.032 2025] [ 0.583587] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:01:14.041 2025] [ 0.583674] EFI services will not be available. [Fri Jan 03 14:01:14.047 2025] [ 0.583934] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:01:14.053 2025] [ 0.584698] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:01:14.058 2025] [ 0.584812] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:01:14.064 2025] [ 0.584829] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:01:14.071 2025] [ 0.584885] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:01:14.077 2025] [ 0.634970] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:01:14.084 2025] [ 0.635056] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:01:14.090 2025] [ 0.635069] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:01:14.096 2025] [ 0.635103] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:01:14.102 2025] [ 0.660984] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:01:14.108 2025] [ 0.661067] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:01:14.114 2025] [ 0.661079] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:01:14.120 2025] [ 0.661109] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:01:14.128 2025] [ 0.661165] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:01:14.134 2025] [ 0.661171] SMP: Total of 4 processors activated. [Fri Jan 03 14:01:14.143 2025] [ 0.695358] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:01:14.145 2025] [ 0.695362] CPU features: detected: CRC32 instructions [Fri Jan 03 14:01:14.150 2025] [ 0.695407] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:01:14.156 2025] [ 0.695409] alternatives: applying system-wide alternatives [Fri Jan 03 14:01:14.160 2025] [ 0.696856] devtmpfs: initialized [Fri Jan 03 14:01:14.165 2025] [ 0.708448] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:01:14.171 2025] [ 0.708473] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:01:14.178 2025] [ 0.713584] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:01:14.183 2025] [ 0.714382] DMI not present or invalid. [Fri Jan 03 14:01:14.190 2025] [ 0.714891] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:01:14.196 2025] [ 0.736298] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:01:14.202 2025] [ 0.736590] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:01:14.208 2025] [ 0.736781] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:01:14.216 2025] [ 0.736869] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:01:14.222 2025] [ 0.737020] audit: type=2000 audit(0.734:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:01:14.231 2025] [ 0.737641] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:01:14.237 2025] [ 0.737646] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:01:14.243 2025] [ 0.737895] ASID allocator initialised with 65536 entries [Fri Jan 03 14:01:14.249 2025] [ 0.752755] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:01:14.255 2025] [ 0.761802] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:01:14.261 2025] [ 0.761811] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:01:14.269 2025] [ 0.761815] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:01:14.275 2025] [ 0.761817] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:01:14.282 2025] [ 0.761821] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:01:14.289 2025] [ 0.761824] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:01:14.296 2025] [ 0.761827] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:01:14.303 2025] [ 0.761830] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:01:14.313 2025] [ 0.763029] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:01:14.317 2025] [ 0.763501] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:01:14.324 2025] [ 0.763508] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:01:14.332 2025] [ 0.763522] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:01:14.340 2025] [ 0.763538] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:01:14.349 2025] [ 0.763548] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.356 2025] [ 0.763554] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:01:14.363 2025] [ 0.763786] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:01:14.371 2025] [ 0.763791] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:01:14.378 2025] [ 0.763804] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:01:14.386 2025] [ 0.763816] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:01:14.394 2025] [ 0.763825] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.405 2025] [ 0.763829] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:01:14.408 2025] [ 0.764084] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:01:14.415 2025] [ 0.764089] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:01:14.423 2025] [ 0.764098] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:01:14.431 2025] [ 0.764111] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:01:14.439 2025] [ 0.764119] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.448 2025] [ 0.764123] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:01:14.454 2025] [ 0.764327] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:01:14.461 2025] [ 0.764332] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:01:14.468 2025] [ 0.764341] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:01:14.477 2025] [ ‚rº²¢šªšêof_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:01:14.486 2025] [ 1.04500[2] printk: console [ttyS2] printing thread started [Fri Jan 03 14:01:14.494 2025] 0.764362] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.502 2025] [ 1.045025] printk: console [ttyS2] enabled [Fri Jan 03 14:01:14.509 2025] [ 1.045029] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:01:14.515 2025] [ 1.057963] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:01:14.522 2025] [ 1.059151] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:01:14.531 2025] [ 1.059160] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:01:14.537 2025] [ 1.059174] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:01:14.544 2025] [ 1.059191] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:01:14.552 2025] [ 1.059203] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.559 2025] [ 1.059207] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:01:14.572 2025] [ 1.059237] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:01:14.574 2025] [ 1.060145] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:01:14.583 2025] [ 1.060155] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:01:14.583 2025] [ 1.060167] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:01:14.592 2025] [ 1.060183] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:01:14.602 2025] [ 1.060193] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.610 2025] [ 1.060197] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:01:14.617 2025] [ 1.063146] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:01:14.624 2025] [ 1.069440] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:01:14.632 2025] [ 1.076110] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:01:14.638 2025] [ 1.076519] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:01:14.644 2025] [ 1.076526] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:01:14.651 2025] [ 1.076541] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:01:14.659 2025] [ 1.076558] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:01:14.669 2025] [ 1.076575] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.676 2025] [ 1.076581] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:01:14.685 2025] [ 1.109990] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:01:14.692 2025] [ 1.110278] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:01:14.699 2025] [ 1.111074] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:01:14.706 2025] [ 1.111083] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:01:14.712 2025] [ 1.111094] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:01:14.725 2025] [ 1.111117] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:01:14.732 2025] [ 1.111132] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.740 2025] [ 1.111136] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:01:14.747 2025] [ 1.111902] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:01:14.755 2025] [ 1.111950] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:01:14.766 2025] [ 1.112212] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:01:14.773 2025] [ 1.112227] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:01:14.781 2025] [ 1.112233] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:01:14.789 2025] [ 1.113018] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:01:14.797 2025] [ 1.129451] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:01:14.803 2025] [ 1.134332] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:01:14.810 2025] [ 1.134346] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:01:14.816 2025] [ 1.134354] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:01:14.823 2025] [ 1.134367] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:01:14.832 2025] [ 1.134389] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:01:14.841 2025] [ 1.134405] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.848 2025] [ 1.134410] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:01:14.854 2025] [ 1.134899] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:01:14.861 2025] [ 1.134915] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:01:14.868 2025] [ 1.134929] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:01:14.880 2025] [ 1.134982] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:01:14.885 2025] [ 1.134996] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.892 2025] [ 1.135001] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:01:14.899 2025] [ 1.135007] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:01:14.905 2025] [ 1.135010] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:01:14.911 2025] [ 1.135019] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:01:14.920 2025] [ 1.135033] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:01:14.929 2025] [ 1.135041] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.936 2025] [ 1.135045] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:01:14.942 2025] [ 1.135545] mmc1: CQHCI version 5.10 [Fri Jan 03 14:01:14.948 2025] [ 1.136312] mmc0: CQHCI version 5.10 [Fri Jan 03 14:01:14.953 2025] [ 1.136471] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:01:14.959 2025] [ 1.136478] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:01:14.965 2025] [ 1.136490] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:01:14.972 2025] [ 1.136517] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:01:14.981 2025] [ 1.136527] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:01:14.988 2025] [ 1.136533] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:01:14.995 2025] [ 1.137259] mmc2: CQHCI version 5.10 [Fri Jan 03 14:01:15.001 2025] [ 1.139185] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:01:15.007 2025] [ 1.141538] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:01:15.016 2025] [ 1.144464] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:01:15.022 2025] [ 1.144668] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:01:15.028 2025] [ 1.144736] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:01:15.034 2025] [ 1.147839] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:01:15.040 2025] [ 1.148086] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:01:15.046 2025] [ 1.148153] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:01:15.056 2025] [ 1.149771] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:01:15.063 2025] [ 1.149778] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:01:15.068 2025] [ 1.149798] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:01:15.081 2025] [ 1.149814] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:01:15.087 2025] [ 1.149832] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:01:15.094 2025] [ 1.149836] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:01:15.101 2025] [ 1.149845] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:01:15.110 2025] [ 1.149857] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:01:15.123 2025] [ 1.149866] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:01:15.127 2025] [ 1.149870] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:01:15.137 2025] [ 1.150307] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:01:15.140 2025] [ 1.150312] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:01:15.150 2025] [ 1.150324] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:01:15.156 2025] [ 1.150340] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:01:15.163 2025] [ 1.150344] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:01:15.169 2025] [ 1.150843] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:01:15.176 2025] [ 1.150857] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:01:15.182 2025] [ 1.150860] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:01:15.188 2025] [ 1.151018] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:01:15.197 2025] [ 1.151030] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:01:15.205 2025] [ 1.151034] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:01:15.215 2025] [ 1.151100] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:01:15.218 2025] [ 1.151110] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:01:15.224 2025] [ 1.151113] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:01:15.230 2025] [ 1.151741] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:01:15.236 2025] [ 1.154561] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:01:15.243 2025] [ 1.166741] ALSA device list: [Fri Jan 03 14:01:15.249 2025] [ 1.166752] No soundcards found. [Fri Jan 03 14:01:15.253 2025] [ 1.171833] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:01:15.259 2025] [ 1.176747] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:01:15.266 2025] [ 1.184194] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:01:15.271 2025] [ 1.205052] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:01:15.279 2025] [ 1.230292] mmc1: new MMC card at address 0001 [Fri Jan 03 14:01:15.285 2025] [ 1.231117] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:01:15.291 2025] [ 1.239074] mmcblk1: p1 [Fri Jan 03 14:01:15.291 2025] [ 1.239856] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:01:15.297 2025] [ 1.241518] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:01:15.303 2025] [ 1.242868] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:01:15.309 2025] [ 1.324786] mmc0: Command Queue Engine enabled [Fri Jan 03 14:01:15.315 2025] [ 1.324809] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:01:15.319 2025] [ 1.325577] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:01:15.324 2025] [ 1.329689] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:01:15.329 2025] [ 1.330762] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:01:15.333 2025] [ 1.332101] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:01:15.338 2025] [ 1.333237] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:01:15.347 2025] [ 1.353409] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:01:15.348 2025] [ 1.353806] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:15.354 2025] [ 1.353887] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:01:15.360 2025] [ 1.354137] devtmpfs: mounted [Fri Jan 03 14:01:15.366 2025] [ 1.355479] Freeing unused kernel memory: 1856K [Fri Jan 03 14:01:15.372 2025] [ 1.360057] Run /sbin/init as init process [Fri Jan 03 14:01:15.377 2025] [ 1.360062] with arguments: [Fri Jan 03 14:01:15.381 2025] [ 1.360064] /sbin/init [Fri Jan 03 14:01:15.381 2025] [ 1.360066] with environment: [Fri Jan 03 14:01:15.386 2025] [ 1.360068] HOME=/ [Fri Jan 03 14:01:15.386 2025] [ 1.360069] TERM=linux [Fri Jan 03 14:01:15.391 2025] [ 1.360071] syntec_extend= [Fri Jan 03 14:01:15.397 2025] [ 1.450669] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:01:15.402 2025] [ 1.489922] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:01:15.407 2025] [ 1.491156] Segment Routing with IPv6 [Fri Jan 03 14:01:15.407 2025] [ 1.491192] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:01:15.412 2025] [ 1.530831] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:01:15.443 2025] [ 1.531433] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:01:15.449 2025] [ 1.534755] systemd[1]: Hostname set to . [Fri Jan 03 14:01:15.454 2025] [ 1.669528] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:01:15.476 2025] [ 1.961229] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:01:15.491 2025] [ 1.963984] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:01:15.509 2025] [ 2.026151] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:01:15.516 2025] [ 2.029564] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:01:15.522 2025] [ 2.031126] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:01:15.529 2025] [ 2.031603] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:01:15.535 2025] [ 2.031934] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:01:15.542 2025] [ 2.032184] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:01:15.549 2025] [ 2.032564] systemd[1]: Reached target Path Units. [Fri Jan 03 14:01:15.555 2025] [ 2.032668] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:01:15.561 2025] [ 2.032741] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:01:15.568 2025] [ 2.032838] systemd[1]: Reached target Swaps. [Fri Jan 03 14:01:15.573 2025] [ 2.037183] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:01:15.579 2025] [ 2.037356] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:01:15.584 2025] [ 2.043437] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:01:15.590 2025] [ 2.043870] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:01:15.598 2025] [ 2.044731] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:01:15.598 2025] [ 2.045311] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:01:15.598 2025] [ 2.045864] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:01:15.614 2025] [ 2.046654] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:01:15.614 2025] [ 2.048564] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:01:15.614 2025] [ 2.049097] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:01:15.629 2025] [ 2.049628] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:01:15.629 2025] [ 2.093745] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:01:15.645 2025] [ 2.097855] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:01:15.661 2025] [ 2.102373] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:01:15.668 2025] [ 2.103215] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:01:15.677 2025] [ 2.105089] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:01:15.692 2025] [ 2.111796] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:01:15.692 2025] [ 2.117012] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:01:15.708 2025] [ 2.122064] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:01:15.708 2025] [ 2.127352] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:01:15.708 2025] [ 2.132293] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:01:15.724 2025] [ 2.138672] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:01:15.724 2025] [ 2.139196] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:01:15.739 2025] [ 2.140538] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:01:15.755 2025] [ 2.140563] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:01:15.755 2025] [ 2.144497] systemd[1]: Starting Journal Service... [Fri Jan 03 14:01:15.771 2025] [ 2.145410] fuse: init (API version 7.37) [Fri Jan 03 14:01:15.771 2025] [ 2.151736] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:01:15.771 2025] [ 2.156601] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:01:15.787 2025] [ 2.162148] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:01:15.787 2025] [ 2.167347] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:01:15.787 2025] [ 2.172027] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:01:15.802 2025] [ 2.190177] systemd[1]: Started RPC Bind. [Fri Jan 03 14:01:15.802 2025] [ 2.191323] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:01:15.818 2025] [ 2.192301] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:01:15.818 2025] [ 2.193056] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:01:15.818 2025] [ 2.194080] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:01:15.833 2025] [ 2.194886] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:01:15.833 2025] [ 2.208832] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:01:15.833 2025] [ 2.211121] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:01:15.849 2025] [ 2.212456] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:01:15.849 2025] [ 2.213094] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:01:15.865 2025] [ 2.216847] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:01:15.869 2025] [ 2.217755] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:01:15.869 2025] [ 2.219689] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:01:15.881 2025] [ 2.220437] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:01:15.881 2025] [ 2.220475] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:01:15.881 2025] [ 2.224625] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:01:15.896 2025] [ 2.245288] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:01:15.896 2025] [ 2.250564] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:01:15.896 2025] [ 2.255920] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:01:15.912 2025] [ 2.263873] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:01:15.912 2025] [ 2.265740] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:01:15.928 2025] [ 2.267460] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:01:15.928 2025] [ 2.275481] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:01:15.928 2025] [ 2.276499] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:01:15.943 2025] [ 2.284686] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:01:15.943 2025] [ 2.285089] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:01:15.969 2025] [ 2.285475] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:01:15.975 2025] [ 2.318211] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:01:15.991 2025] [ 2.324448] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:01:15.991 2025] [ 2.376306] systemd[1]: Started Journal Service. [Fri Jan 03 14:01:15.991 2025] [ 2.427943] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:01:16.163 2025] [ 2.722046] random: crng init done [Fri Jan 03 14:01:16.320 2025] [ 2.889134] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:01:16.336 2025] [ 2.889156] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:01:16.351 2025] [ 2.889171] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:01:16.383 2025] [ 2.889198] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:01:16.399 2025] [ 2.889222] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:01:16.414 2025] [ 2.900744] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:01:16.414 2025] [ 2.900764] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:01:16.430 2025] [ 2.900794] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:01:16.445 2025] [ 2.900823] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:01:16.445 2025] [ 2.900833] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:01:16.461 2025] [ 2.900837] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:01:16.477 2025] [ 2.900851] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:01:16.493 2025] [ 2.900865] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:01:16.508 2025] [ 2.900872] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:01:16.524 2025] [ 2.900876] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:01:16.524 2025] [ 2.900887] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:01:16.540 2025] [ 2.900898] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:01:16.555 2025] [ 2.917083] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:01:16.555 2025] [ 2.917101] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:01:16.571 2025] [ 2.917128] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:01:16.571 2025] [ 2.917131] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:01:16.618 2025] [ 2.917168] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:01:16.649 2025] [ 2.935045] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:01:16.649 2025] [ 2.936220] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:31:34 UTC (1681065094) [Fri Jan 03 14:01:16.681 2025] [ 2.938375] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:01:16.712 2025] [ 2.938397] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:01:16.728 2025] [ 2.966543] mc: Linux media interface: v0.10 [Fri Jan 03 14:01:16.744 2025] [ 2.991623] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:01:16.744 2025] [ 3.052788] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:01:16.771 2025] [ 3.056168] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:01:16.775 2025] [ 3.060039] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:01:16.791 2025] [ 3.064621] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:01:16.791 2025] [ 3.066822] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:01:16.791 2025] [ 3.066872] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:01:16.807 2025] [ 3.066915] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:01:16.822 2025] [ 3.066922] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:01:16.822 2025] [ 3.233228] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:01:16.838 2025] [ 3.243934] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:01:16.838 2025] [ 3.245278] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:01:16.838 2025] [ 3.245293] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:01:16.854 2025] [ 3.245316] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:01:16.871 2025] [ 3.245347] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:01:16.885 2025] [ 3.245363] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:01:16.885 2025] [ 3.245369] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:01:16.885 2025] [ 3.255162] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:01:16.901 2025] [ 3.255308] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:01:16.917 2025] [ 3.255436] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:01:16.917 2025] [ 3.255777] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:01:16.932 2025] [ 3.255851] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:01:16.932 2025] [ 3.284162] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:01:16.948 2025] [ 3.284210] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:01:16.964 2025] [ 3.285102] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:01:16.971 2025] [ 3.285145] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:01:16.980 2025] [ 3.285153] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:01:16.995 2025] [ 3.308445] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:01:16.995 2025] [ 3.308748] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:01:16.995 2025] [ 3.336943] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:01:17.011 2025] [ 3.337572] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:01:17.011 2025] [ 3.337596] Get kick_gpio number= (418) [Fri Jan 03 14:01:17.652 2025] [ 4.211013] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:01:17.662 2025] [ 4.211038] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:01:17.668 2025] [ 4.211056] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:01:17.681 2025] [ 4.211083] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:01:17.690 2025] [ 4.211100] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:01:17.696 2025] [ 4.211106] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:01:17.702 2025] [ 4.211291] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:01:17.710 2025] [ 4.263745] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:01:17.716 2025] [ 4.268329] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:01:17.938 2025] [ 4.496228] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:01:17.947 2025] [ 4.496291] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:01:18.001 2025] [ 4.496532] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:01:18.007 2025] [ 4.496544] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:01:18.031 2025] [ 4.517872] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:01:18.051 2025] [ 4.524180] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:01:18.068 2025] [ 4.526817] hub 1-0:1.0: USB hub found [Fri Jan 03 14:01:18.074 2025] [ 4.526878] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:01:18.209 2025] [ 4.766049] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:01:18.383 2025] [ 4.941076] hub 1-1:1.0: USB hub found [Fri Jan 03 14:01:18.388 2025] [ 4.942088] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:01:18.610 2025] [ 5.167828] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:01:18.616 2025] [ 5.167867] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:18.632 2025] [ 5.167904] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:01:18.638 2025] [ 5.167914] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:18.645 2025] [ 5.194363] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:01:18.656 2025] [ 5.211846] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:01:18.664 2025] [ 5.214138] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:01:18.673 2025] [ 5.214181] cfg80211: failed to load regulatory.db [Fri Jan 03 14:01:18.779 2025] [ 5.336286] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:01:18.791 2025] [ 5.336326] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:01:18.827 2025] [ 5.350355] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:01:18.836 2025] [ 5.392911] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:01:18.842 2025] [ 5.392948] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:18.882 2025] [ 5.440916] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:01:18.890 2025] [ 5.442497] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:19.347 2025] [ 5.904936] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:01:19.417 2025] [ 5.976214] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:01:19.432 2025] [ 5.976262] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:01:19.478 2025] [ 6.036542] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:01:19.483 2025] [ 6.037857] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:01:19.631 2025] *************************************************************** [Fri Jan 03 14:01:19.636 2025] *************************************************************** [Fri Jan 03 14:01:19.642 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:01:19.648 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:01:19.655 2025] bash [Fri Jan 03 14:01:19.655 2025] cifs-utils [Fri Jan 03 14:01:19.655 2025] dosfstools [Fri Jan 03 14:01:19.655 2025] grub-common [Fri Jan 03 14:01:19.655 2025] grub-editenv [Fri Jan 03 14:01:19.659 2025] grub-efi [Fri Jan 03 14:01:19.659 2025] less [Fri Jan 03 14:01:19.664 2025] lib32-libgcc1 [Fri Jan 03 14:01:19.664 2025] lib32-libstdc++6 [Fri Jan 03 14:01:19.664 2025] libdw1 [Fri Jan 03 14:01:19.664 2025] libelf1 [Fri Jan 03 14:01:19.669 2025] libgcc1 [Fri Jan 03 14:01:19.669 2025] libgdbm-compat4 [Fri Jan 03 14:01:19.669 2025] libgdbm6 [Fri Jan 03 14:01:19.669 2025] libgmp10 [Fri Jan 03 14:01:19.669 2025] libidn2-0 [Fri Jan 03 14:01:19.674 2025] libreadline8 [Fri Jan 03 14:01:19.674 2025] libstdc++6 [Fri Jan 03 14:01:19.674 2025] libunistring2 [Fri Jan 03 14:01:19.679 2025] libvte-2.91-0 [Fri Jan 03 14:01:19.679 2025] nettle [Fri Jan 03 14:01:19.679 2025] onboard [Fri Jan 03 14:01:19.679 2025] parted [Fri Jan 03 14:01:19.679 2025] rxvt-unicode [Fri Jan 03 14:01:19.683 2025] [Fri Jan 03 14:01:19.683 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:01:19.688 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:01:19.693 2025] the opkg remove command. i.e.: [Fri Jan 03 14:01:19.693 2025] opkg remove [Fri Jan 03 14:01:19.698 2025] Where is the name printed in the list above [Fri Jan 03 14:01:19.703 2025] [Fri Jan 03 14:01:19.703 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:01:19.708 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:01:19.713 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:01:19.718 2025] also remove the dependent packages as well [Fri Jan 03 14:01:19.723 2025] *************************************************************** [Fri Jan 03 14:01:19.728 2025] *************************************************************** [Fri Jan 03 14:01:25.292 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:01:25.298 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:01:25.363 2025] [Fri Jan 03 14:01:25.363 2025] _____ _____ _ _ [Fri Jan 03 14:01:25.368 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:01:25.374 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:01:25.380 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:01:25.385 2025] |___| |___| [Fri Jan 03 14:01:25.391 2025] [Fri Jan 03 14:01:25.391 2025] Arago Project am62xx-evm - [Fri Jan 03 14:01:25.391 2025] [Fri Jan 03 14:01:25.391 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:01:25.396 2025] [Fri Jan 03 14:01:25.396 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:01:25.493 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:01:25.661 2025] [ 12.225713] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:01:25.661 2025] [ 12.225735] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:01:25.677 2025] [ 12.225754] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.677 2025] [ 12.225805] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:01:25.677 2025] [ 12.225810] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:01:25.698 2025] [ 12.225817] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.698 2025] [ 12.225852] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:01:25.708 2025] [ 12.225857] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:01:25.708 2025] [ 12.225864] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.708 2025] [ 12.225898] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:01:25.724 2025] [ 12.225903] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:01:25.724 2025] [ 12.225910] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.740 2025] [ 12.225943] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:01:25.740 2025] [ 12.225952] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:01:25.740 2025] [ 12.226058] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.755 2025] [ 12.226113] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:01:25.755 2025] [ 12.226119] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:01:25.771 2025] [ 12.226127] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.771 2025] [ 12.226162] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:01:25.771 2025] [ 12.226169] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:01:25.787 2025] [ 12.226175] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:25.787 2025] [ 12.226209] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:01:25.803 2025] [ 12.226214] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:01:25.803 2025] [ 12.226224] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:27.967 2025] [ 14.523885] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:01:27.972 2025] [ 14.523912] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:01:27.978 2025] [ 14.523930] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:27.985 2025] [ 14.524087] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:01:27.991 2025] [ 14.524094] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:01:27.997 2025] [ 14.524103] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.003 2025] [ 14.524146] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:01:28.011 2025] [ 14.524151] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:01:28.017 2025] [ 14.524158] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.024 2025] [ 14.524198] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:01:28.028 2025] [ 14.524203] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:01:28.034 2025] [ 14.524210] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.040 2025] [ 14.524244] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:01:28.046 2025] [ 14.524249] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:01:28.052 2025] [ 14.524256] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.060 2025] [ 14.524290] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:01:28.066 2025] [ 14.524295] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:01:28.072 2025] [ 14.524302] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.078 2025] [ 14.524335] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:01:28.084 2025] [ 14.524343] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:01:28.090 2025] [ 14.524350] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.096 2025] [ 14.524383] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:01:28.102 2025] [ 14.524389] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:01:28.107 2025] [ 14.524395] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:28.462 2025] [ 15.019596] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:01:31.754 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:01:31.770 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:01:33.566 2025] [ 20.135276] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:01:33.582 2025] [ 20.135299] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:01:33.582 2025] [ 20.135322] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.582 2025] [ 20.135371] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:01:33.602 2025] [ 20.135376] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:01:33.608 2025] [ 20.135383] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.615 2025] [ 20.135421] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:01:33.620 2025] [ 20.135426] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:01:33.629 2025] [ 20.135434] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.635 2025] [ 20.135473] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:01:33.641 2025] [ 20.135478] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:01:33.647 2025] [ 20.135485] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.653 2025] [ 20.135519] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:01:33.659 2025] [ 20.135525] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:01:33.665 2025] [ 20.135536] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.671 2025] [ 20.135569] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:01:33.678 2025] [ 20.135574] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:01:33.684 2025] [ 20.135581] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.691 2025] [ 20.135618] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:01:33.697 2025] [ 20.135623] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:01:33.703 2025] [ 20.135630] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.709 2025] [ 20.135664] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:01:33.715 2025] [ 20.135669] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:01:33.721 2025] [ 20.135680] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.727 2025] [ 20.226222] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:01:33.735 2025] [ 20.226253] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:01:33.740 2025] [ 20.226272] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.746 2025] [ 20.226335] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:01:33.752 2025] [ 20.226341] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:01:33.758 2025] [ 20.226348] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.764 2025] [ 20.226389] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:01:33.770 2025] [ 20.226394] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:01:33.776 2025] [ 20.226402] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.782 2025] [ 20.226438] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:01:33.788 2025] [ 20.226443] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:01:33.794 2025] [ 20.226453] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.800 2025] [ 20.226486] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:01:33.806 2025] [ 20.226491] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:01:33.812 2025] [ 20.226499] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.819 2025] [ 20.226536] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:01:33.826 2025] [ 20.226541] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:01:33.831 2025] [ 20.226549] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.837 2025] [ 20.226583] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:01:33.845 2025] [ 20.226588] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:01:33.849 2025] [ 20.226597] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:01:33.855 2025] [ 20.226633] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:01:33.861 2025] [ 20.226637] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:01:33.868 2025] [ 20.226644] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:05.368 2025] [Fri Jan 03 14:02:05.368 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:02:05.388 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:02:05.438 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:02:05.460 2025] Trying to boot from MMC1 [Fri Jan 03 14:02:05.628 2025] Authentication passed [Fri Jan 03 14:02:05.628 2025] Authentication passed [Fri Jan 03 14:02:05.628 2025] Authentication passed [Fri Jan 03 14:02:05.675 2025] Authentication passed [Fri Jan 03 14:02:05.675 2025] Authentication passed [Fri Jan 03 14:02:05.675 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:02:05.675 2025] [Fri Jan 03 14:02:05.690 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:02:05.690 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:02:05.990 2025] [Fri Jan 03 14:02:05.990 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:02:05.990 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:02:06.045 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:02:06.045 2025] Error: could not access storage. [Fri Jan 03 14:02:06.052 2025] Trying to boot from MMC1 [Fri Jan 03 14:02:06.194 2025] Authentication passed [Fri Jan 03 14:02:06.210 2025] Authentication passed [Fri Jan 03 14:02:06.855 2025] [Fri Jan 03 14:02:06.855 2025] [Fri Jan 03 14:02:06.855 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:02:06.871 2025] [Fri Jan 03 14:02:06.871 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:02:06.871 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:02:06.871 2025] DRAM: 2 GiB [Fri Jan 03 14:02:07.122 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:02:07.123 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:02:07.138 2025] Loading Environment from MMC... OK [Fri Jan 03 14:02:07.328 2025] In: serial [Fri Jan 03 14:02:07.328 2025] Out: serial [Fri Jan 03 14:02:07.343 2025] Err: serial [Fri Jan 03 14:02:07.349 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:02:07.349 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:02:07.500 2025] switch to partitions #0, OK [Fri Jan 03 14:02:07.500 2025] mmc0(part 0) is current device [Fri Jan 03 14:02:07.650 2025] SD/MMC found on device 0 [Fri Jan 03 14:02:07.659 2025] Running eMMC boot ... [Fri Jan 03 14:02:07.675 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:02:07.675 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:02:07.675 2025] Importing environment from mmc0 ... [Fri Jan 03 14:02:07.896 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:02:07.927 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:02:07.927 2025] Working FDT set to 88000000 [Fri Jan 03 14:02:07.927 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:02:07.942 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:02:07.942 2025] Working FDT set to 88000000 [Fri Jan 03 14:02:07.958 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:02:07.974 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:02:07.974 2025] Working FDT set to 8feed000 [Fri Jan 03 14:02:07.990 2025] [Fri Jan 03 14:02:07.990 2025] Starting kernel ... [Fri Jan 03 14:02:07.990 2025] [Fri Jan 03 14:02:08.021 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:02:08.036 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:02:08.053 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:02:08.053 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:02:08.152 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:02:08.152 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:02:08.162 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:02:08.162 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:02:08.178 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:02:08.178 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:02:08.194 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:02:08.194 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:02:08.209 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:02:08.209 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:02:08.225 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:02:08.225 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:02:08.241 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:02:08.257 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:02:08.257 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:02:08.257 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:02:08.272 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:02:08.272 2025] [ 0.000000] Normal empty [Fri Jan 03 14:02:08.272 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:02:08.288 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:02:08.288 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:02:08.288 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:02:08.304 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:02:08.304 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:02:08.304 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:02:08.319 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:02:08.319 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:02:08.319 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:02:08.335 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:02:08.335 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:02:08.352 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:02:08.352 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:02:08.352 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:02:08.367 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:02:08.367 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:02:08.367 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:02:08.382 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:02:08.382 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:02:08.382 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:02:08.398 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:02:08.398 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:02:08.414 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:02:08.414 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:02:08.461 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:02:08.461 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:02:08.477 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:02:08.477 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:02:08.492 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:02:08.508 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:02:08.508 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:02:08.524 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:02:08.524 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:02:08.539 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:02:08.539 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:02:08.552 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:02:08.555 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:02:08.555 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:02:08.571 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:02:08.571 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:02:08.571 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:02:08.587 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:02:08.587 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:02:08.587 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:02:08.587 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:02:08.602 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:02:08.602 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:02:08.618 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:02:08.618 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:02:08.618 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:02:08.634 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:02:08.634 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:02:08.652 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:02:08.652 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:02:08.665 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:02:08.681 2025] [ 0.000251] Console: colour dummy device 80x25 [Fri Jan 03 14:02:08.681 2025] [ 0.528875] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:02:08.681 2025] [ 0.528885] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:02:08.697 2025] [ 0.528969] LSM: Security Framework initializing [Fri Jan 03 14:02:08.697 2025] [ 0.529108] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:02:08.712 2025] [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:02:08.712 2025] [ 0.530827] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:02:08.712 2025] [ 0.530833] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:02:08.728 2025] [ 0.530878] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:02:08.728 2025] [ 0.583337] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:02:08.743 2025] [ 0.583578] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:02:08.753 2025] [ 0.583663] EFI services will not be available. [Fri Jan 03 14:02:08.760 2025] [ 0.583919] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:02:08.760 2025] [ 0.584692] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:02:08.760 2025] [ 0.584805] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:02:08.775 2025] [ 0.584822] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:02:08.775 2025] [ 0.584877] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:02:08.775 2025] [ 0.634957] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:02:08.791 2025] [ 0.635042] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:02:08.791 2025] [ 0.635055] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:02:08.807 2025] [ 0.635089] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:02:08.807 2025] [ 0.660957] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:02:08.807 2025] [ 0.661040] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:02:08.822 2025] [ 0.661052] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:02:08.822 2025] [ 0.661081] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:02:08.838 2025] [ 0.661137] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:02:08.838 2025] [ 0.661144] SMP: Total of 4 processors activated. [Fri Jan 03 14:02:08.854 2025] [ 0.695342] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:02:08.854 2025] [ 0.695346] CPU features: detected: CRC32 instructions [Fri Jan 03 14:02:08.854 2025] [ 0.695392] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:02:08.854 2025] [ 0.695394] alternatives: applying system-wide alternatives [Fri Jan 03 14:02:08.870 2025] [ 0.696879] devtmpfs: initialized [Fri Jan 03 14:02:08.870 2025] [ 0.708490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:02:08.870 2025] [ 0.708516] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:02:08.885 2025] [ 0.713718] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:02:08.885 2025] [ 0.714534] DMI not present or invalid. [Fri Jan 03 14:02:08.901 2025] [ 0.715061] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:02:08.901 2025] [ 0.729142] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:02:08.901 2025] [ 0.729435] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:02:08.916 2025] [ 0.729629] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:02:08.916 2025] [ 0.729771] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:02:08.932 2025] [ 0.729965] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:02:08.932 2025] [ 0.730599] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:02:08.948 2025] [ 0.730603] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:02:08.953 2025] [ 0.730847] ASID allocator initialised with 65536 entries [Fri Jan 03 14:02:08.953 2025] [ 0.745753] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:02:08.964 2025] [ 0.754931] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:02:08.964 2025] [ 0.754942] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:02:08.980 2025] [ 0.754947] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:02:08.980 2025] [ 0.754949] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:02:08.995 2025] [ 0.754953] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:02:08.995 2025] [ 0.754956] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:02:08.995 2025] [ 0.754959] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:02:09.011 2025] [ 0.754962] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:02:09.011 2025] [ 0.756140] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:02:09.026 2025] [ 0.756680] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:02:09.026 2025] [ 0.756688] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:02:09.042 2025] [ 0.756702] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:02:09.042 2025] [ 0.756717] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:02:09.058 2025] [ 0.756728] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.058 2025] [ 0.756734] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:02:09.074 2025] [ 0.756967] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:02:09.074 2025] [ 0.756972] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:02:09.089 2025] [ 0.756981] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:02:09.089 2025] [ 0.756994] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:02:09.105 2025] [ 0.757003] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.105 2025] [ 0.757007] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:02:09.121 2025] [ 0.757236] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:02:09.121 2025] [ 0.757241] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:02:09.136 2025] [ 0.757250] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:02:09.136 2025] [ 0.757263] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:02:09.154 2025] [ [0.999792] printk: console [ttyS2] printing thread started [Fri Jan 03 14:02:09.154 2025] 0.757271] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.154 2025] [ 0.999813] printk: console [ttyS2] enabled [Fri Jan 03 14:02:09.168 2025] [ 0.999817] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:02:09.168 2025] [ 1.012751] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:02:09.184 2025] [ 1.013923] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:02:09.184 2025] [ 1.013933] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:02:09.184 2025] [ 1.013946] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:02:09.199 2025] [ 1.013963] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:02:09.215 2025] [ 1.013974] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.215 2025] [ 1.013980] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:02:09.215 2025] [ 1.014009] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:02:09.231 2025] [ 1.014939] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:02:09.231 2025] [ 1.014948] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:02:09.246 2025] [ 1.014958] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:02:09.254 2025] [ 1.014971] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:02:09.262 2025] [ 1.014981] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.262 2025] [ 1.014985] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:02:09.278 2025] [ 1.018000] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:02:09.278 2025] [ 1.024730] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:02:09.294 2025] [ 1.031149] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:02:09.294 2025] [ 1.031571] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:02:09.294 2025] [ 1.031577] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:02:09.309 2025] [ 1.031590] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:02:09.325 2025] [ 1.031608] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:02:09.325 2025] [ 1.031622] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.341 2025] [ 1.031627] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:02:09.341 2025] [ 1.065138] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:02:09.357 2025] [ 1.065429] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:02:09.357 2025] [ 1.066222] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:02:09.357 2025] [ 1.066232] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:02:09.373 2025] [ 1.066244] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:02:09.388 2025] [ 1.066269] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:02:09.389 2025] [ 1.066284] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.405 2025] [ 1.066289] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:02:09.405 2025] [ 1.067017] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:02:09.420 2025] [ 1.067065] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:02:09.420 2025] [ 1.067363] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:02:09.436 2025] [ 1.067376] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:02:09.436 2025] [ 1.067381] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:02:09.454 2025] [ 1.068173] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:02:09.454 2025] [ 1.084639] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:02:09.468 2025] [ 1.089728] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:02:09.468 2025] [ 1.089742] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:02:09.468 2025] [ 1.089762] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:02:09.483 2025] [ 1.089790] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:02:09.499 2025] [ 1.089802] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.499 2025] [ 1.089806] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:02:09.499 2025] [ 1.089843] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:02:09.514 2025] [ 1.090226] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:02:09.514 2025] [ 1.090235] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:02:09.530 2025] [ 1.090247] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:02:09.546 2025] [ 1.090273] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:02:09.546 2025] [ 1.090283] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.555 2025] [ 1.090291] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:02:09.562 2025] [ 1.090297] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:02:09.562 2025] [ 1.090300] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:02:09.578 2025] [ 1.090309] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:02:09.578 2025] [ 1.090321] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:02:09.593 2025] [ 1.090329] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.593 2025] [ 1.090333] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:02:09.612 2025] [ 1.090736] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:02:09.618 2025] [ 1.090745] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:02:09.625 2025] [ 1.090761] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:02:09.636 2025] [ 1.090779] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:02:09.643 2025] [ 1.090802] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.650 2025] [ 1.090809] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:02:09.657 2025] [ 1.091102] mmc1: CQHCI version 5.10 [Fri Jan 03 14:02:09.664 2025] [ 1.091288] mmc0: CQHCI version 5.10 [Fri Jan 03 14:02:09.664 2025] [ 1.091405] mmc2: CQHCI version 5.10 [Fri Jan 03 14:02:09.670 2025] [ 1.094757] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:02:09.680 2025] [ 1.097100] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:02:09.685 2025] [ 1.100112] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:02:09.691 2025] [ 1.100321] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:02:09.697 2025] [ 1.100388] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:02:09.703 2025] [ 1.103544] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:02:09.709 2025] [ 1.103747] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:02:09.715 2025] [ 1.103815] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:02:09.724 2025] [ 1.105435] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:02:09.734 2025] [ 1.105444] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:02:09.741 2025] [ 1.105464] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:02:09.753 2025] [ 1.105480] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:02:09.758 2025] [ 1.105499] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:02:09.764 2025] [ 1.105503] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:02:09.771 2025] [ 1.105512] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:02:09.780 2025] [ 1.105523] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:02:09.788 2025] [ 1.105532] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:02:09.796 2025] [ 1.105537] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:02:09.802 2025] [ 1.105965] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:02:09.809 2025] [ 1.105970] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:02:09.816 2025] [ 1.105983] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:02:09.824 2025] [ 1.105994] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:02:09.831 2025] [ 1.105998] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:02:09.837 2025] [ 1.106565] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:02:09.848 2025] [ 1.106588] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:02:09.851 2025] [ 1.106592] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:02:09.857 2025] [ 1.106693] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:02:09.865 2025] [ 1.106704] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:02:09.872 2025] [ 1.106708] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:02:09.877 2025] [ 1.106773] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:02:09.885 2025] [ 1.106783] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:02:09.892 2025] [ 1.106786] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:02:09.899 2025] [ 1.107463] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:02:09.905 2025] [ 1.110181] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:02:09.910 2025] [ 1.122589] ALSA device list: [Fri Jan 03 14:02:09.917 2025] [ 1.122606] No soundcards found. [Fri Jan 03 14:02:09.921 2025] [ 1.128472] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:02:09.927 2025] [ 1.133766] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:02:09.934 2025] [ 1.143704] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:02:09.940 2025] [ 1.143904] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:02:09.948 2025] [ 1.189770] mmc1: new MMC card at address 0001 [Fri Jan 03 14:02:09.954 2025] [ 1.190612] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:02:09.960 2025] [ 1.198663] mmcblk1: p1 [Fri Jan 03 14:02:09.960 2025] [ 1.199478] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:02:09.967 2025] [ 1.201156] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:02:09.975 2025] [ 1.202487] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:02:09.977 2025] [ 1.247426] mmc0: Command Queue Engine enabled [Fri Jan 03 14:02:09.982 2025] [ 1.247446] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:02:09.988 2025] [ 1.248294] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:02:09.992 2025] [ 1.252281] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:02:09.997 2025] [ 1.253394] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:02:10.002 2025] [ 1.254695] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:02:10.007 2025] [ 1.255831] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:02:10.016 2025] [ 1.280580] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:02:10.016 2025] [ 1.280956] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:10.023 2025] [ 1.281033] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:02:10.029 2025] [ 1.281205] devtmpfs: mounted [Fri Jan 03 14:02:10.034 2025] [ 1.282613] Freeing unused kernel memory: 1856K [Fri Jan 03 14:02:10.039 2025] [ 1.282734] Run /sbin/init as init process [Fri Jan 03 14:02:10.044 2025] [ 1.282737] with arguments: [Fri Jan 03 14:02:10.049 2025] [ 1.282739] /sbin/init [Fri Jan 03 14:02:10.049 2025] [ 1.282740] with environment: [Fri Jan 03 14:02:10.054 2025] [ 1.282742] HOME=/ [Fri Jan 03 14:02:10.054 2025] [ 1.282744] TERM=linux [Fri Jan 03 14:02:10.059 2025] [ 1.282745] syntec_extend= [Fri Jan 03 14:02:10.063 2025] [ 1.373586] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:02:10.065 2025] [ 1.411604] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:02:10.071 2025] [ 1.412833] Segment Routing with IPv6 [Fri Jan 03 14:02:10.075 2025] [ 1.412869] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:02:10.080 2025] [ 1.452021] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:02:10.108 2025] [ 1.452592] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:02:10.114 2025] [ 1.455940] systemd[1]: Hostname set to . [Fri Jan 03 14:02:10.120 2025] [ 1.594427] systemd-sysv-generator[182]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:02:10.147 2025] [ 1.875523] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:02:10.161 2025] [ 1.878286] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:02:10.178 2025] [ 1.940738] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:02:10.185 2025] [ 1.943993] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:02:10.191 2025] [ 1.945560] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:02:10.197 2025] [ 1.946031] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:02:10.203 2025] [ 1.946403] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:02:10.210 2025] [ 1.946603] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:02:10.217 2025] [ 1.946961] systemd[1]: Reached target Path Units. [Fri Jan 03 14:02:10.223 2025] [ 1.947056] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:02:10.230 2025] [ 1.947158] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:02:10.236 2025] [ 1.947248] systemd[1]: Reached target Swaps. [Fri Jan 03 14:02:10.240 2025] [ 1.951401] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:02:10.247 2025] [ 1.951568] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:02:10.253 2025] [ 1.957748] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:02:10.258 2025] [ 1.958230] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:02:10.265 2025] [ 1.959033] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:02:10.270 2025] [ 1.959699] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:02:10.276 2025] [ 1.960294] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:02:10.281 2025] [ 1.961043] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:02:10.287 2025] [ 1.962906] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:02:10.293 2025] [ 1.963427] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:02:10.298 2025] [ 1.963952] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:02:10.308 2025] [ 2.024955] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:02:10.312 2025] [ 2.029148] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:02:10.318 2025] [ 2.033504] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:02:10.324 2025] [ 2.034382] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:02:10.336 2025] [ 2.035601] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:02:10.346 2025] [ 2.039760] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:02:10.357 2025] [ 2.045543] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:02:10.365 2025] [ 2.050770] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:02:10.372 2025] [ 2.059043] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:02:10.378 2025] [ 2.063895] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:02:10.384 2025] [ 2.070055] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:02:10.390 2025] [ 2.070681] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:02:10.401 2025] [ 2.072212] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:02:10.417 2025] [ 2.072239] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:02:10.425 2025] [ 2.076048] systemd[1]: Starting Journal Service... [Fri Jan 03 14:02:10.432 2025] [ 2.085221] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:02:10.437 2025] [ 2.085655] fuse: init (API version 7.37) [Fri Jan 03 14:02:10.447 2025] [ 2.090235] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:02:10.449 2025] [ 2.096941] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:02:10.455 2025] [ 2.109677] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:02:10.460 2025] [ 2.116432] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:02:10.466 2025] [ 2.137910] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:02:10.472 2025] [ 2.141956] systemd[1]: Started RPC Bind. [Fri Jan 03 14:02:10.481 2025] [ 2.142673] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:02:10.482 2025] [ 2.143996] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:02:10.487 2025] [ 2.145017] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:02:10.493 2025] [ 2.145845] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:02:10.497 2025] [ 2.146766] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:02:10.503 2025] [ 2.148718] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:02:10.509 2025] [ 2.151038] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:02:10.515 2025] [ 2.152176] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:02:10.521 2025] [ 2.155173] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:02:10.527 2025] [ 2.158436] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:02:10.533 2025] [ 2.162257] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:02:10.539 2025] [ 2.162949] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:02:10.546 2025] [ 2.163784] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:02:10.551 2025] [ 2.172883] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:02:10.558 2025] [ 2.174290] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:02:10.565 2025] [ 2.175802] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:02:10.571 2025] [ 2.197078] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:02:10.577 2025] [ 2.201852] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:02:10.583 2025] [ 2.209217] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:02:10.593 2025] [ 2.209650] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:02:10.611 2025] [ 2.217034] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:02:10.616 2025] [ 2.217670] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:02:10.624 2025] [ 2.222581] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:02:10.631 2025] [ 2.233554] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:02:10.646 2025] [ 2.234618] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:02:10.662 2025] [ 2.235657] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:02:10.668 2025] [ 2.285338] systemd[1]: Started Journal Service. [Fri Jan 03 14:02:10.678 2025] [ 2.328512] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:02:10.798 2025] [ 2.643183] random: crng init done [Fri Jan 03 14:02:10.953 2025] [ 2.799085] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:02:10.962 2025] [ 2.799106] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:02:10.964 2025] [ 2.804608] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:02:10.975 2025] [ 2.804655] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:02:10.990 2025] [ 2.804681] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:02:11.001 2025] [ 2.816663] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:02:11.008 2025] [ 2.816684] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:02:11.015 2025] [ 2.816718] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:02:11.027 2025] [ 2.816747] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:02:11.038 2025] [ 2.816758] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:02:11.047 2025] [ 2.816762] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:02:11.052 2025] [ 2.816776] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:02:11.067 2025] [ 2.816787] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:02:11.096 2025] [ 2.816794] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:02:11.134 2025] [ 2.816797] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:02:11.141 2025] [ 2.816807] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:02:11.157 2025] [ 2.816818] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:02:11.173 2025] [ 2.826426] mc: Linux media interface: v0.10 [Fri Jan 03 14:02:11.182 2025] [ 2.833268] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:02:11.194 2025] [ 2.833284] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:02:11.201 2025] [ 2.833318] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:02:11.216 2025] [ 2.833321] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:02:11.231 2025] [ 2.833346] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:02:11.239 2025] [ 2.840021] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:02:11.245 2025] [ 2.841171] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:32:29 UTC (1681065149) [Fri Jan 03 14:02:11.255 2025] [ 2.846986] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:02:11.266 2025] [ 2.857911] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:02:11.283 2025] [ 2.857939] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:02:11.303 2025] [ 2.995775] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:02:11.306 2025] [ 2.995946] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:02:11.313 2025] [ 2.996011] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:02:11.319 2025] [ 3.003384] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:02:11.325 2025] [ 3.004878] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:02:11.338 2025] [ 3.004917] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:02:11.363 2025] [ 3.004955] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:02:11.374 2025] [ 3.004964] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:02:11.384 2025] [ 3.172439] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:02:11.392 2025] [ 3.196425] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:02:11.402 2025] [ 3.196614] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:02:11.409 2025] [ 3.196802] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:02:11.418 2025] [ 3.205897] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:02:11.424 2025] [ 3.205983] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:02:11.430 2025] [ 3.212473] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:02:11.436 2025] [ 3.212517] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:02:11.445 2025] [ 3.230630] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:02:11.454 2025] [ 3.230687] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 14:02:11.459 2025] [ 3.230695] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:02:11.467 2025] [ 3.230843] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:02:11.479 2025] [ 3.236920] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:02:11.482 2025] [ 3.270838] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:02:11.488 2025] [ 3.270869] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:02:11.495 2025] [ 3.270874] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:02:11.501 2025] [ 3.270897] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:02:11.511 2025] [ 3.270924] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:02:11.522 2025] [ 3.270940] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:02:11.530 2025] [ 3.270945] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:02:11.535 2025] [ 3.306473] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:02:11.541 2025] [ 3.306942] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:02:11.552 2025] [ 3.306961] Get kick_gpio number= (418) [Fri Jan 03 14:02:12.666 2025] [ 4.521402] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:02:12.682 2025] [ 4.521423] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:02:12.682 2025] [ 4.521445] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:02:12.697 2025] [ 4.521476] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:02:12.713 2025] [ 4.521493] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:02:12.792 2025] [ 4.521498] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:02:12.807 2025] [ 4.536492] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:02:12.823 2025] [ 4.540298] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:02:12.823 2025] [ 4.541550] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:02:12.862 2025] [ 4.699456] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:02:12.870 2025] [ 4.702452] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:02:12.886 2025] [ 4.702503] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:02:12.886 2025] [ 4.702694] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:02:12.901 2025] [ 4.702703] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:02:12.917 2025] [ 4.717360] xhci-hcd xhci-hcd.4.auto: irq 467, io mem 0x31100000 [Fri Jan 03 14:02:12.933 2025] [ 4.718723] hub 1-0:1.0: USB hub found [Fri Jan 03 14:02:12.964 2025] [ 4.718793] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:02:12.980 2025] [ 4.800430] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:02:12.980 2025] [ 4.824324] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:02:12.996 2025] [ 4.826339] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:02:12.996 2025] [ 4.826378] cfg80211: failed to load regulatory.db [Fri Jan 03 14:02:13.090 2025] [ 4.942253] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:02:13.106 2025] [ 4.942297] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:02:13.106 2025] [ 4.958227] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:02:13.279 2025] [ 5.134201] hub 1-1:1.0: USB hub found [Fri Jan 03 14:02:13.279 2025] [ 5.135086] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:02:13.468 2025] [ 5.323081] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:02:13.468 2025] [ 5.323217] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:13.484 2025] [ 5.344442] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:02:13.500 2025] [ 5.344494] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:13.515 2025] [ 5.375867] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:02:13.531 2025] [ 5.375907] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:13.707 2025] [ 5.554301] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:02:13.770 2025] [ 5.628103] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:02:13.785 2025] [ 5.634967] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:13.896 2025] [ 5.744913] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:02:13.927 2025] [ 5.778572] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:02:13.942 2025] [ 5.778613] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:02:14.226 2025] [ 6.082164] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:02:14.241 2025] [ 6.083318] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:02:14.509 2025] *************************************************************** [Fri Jan 03 14:02:14.509 2025] *************************************************************** [Fri Jan 03 14:02:14.509 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:02:14.524 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:02:14.524 2025] bash [Fri Jan 03 14:02:14.524 2025] cifs-utils [Fri Jan 03 14:02:14.524 2025] dosfstools [Fri Jan 03 14:02:14.524 2025] grub-common [Fri Jan 03 14:02:14.540 2025] grub-editenv [Fri Jan 03 14:02:14.540 2025] grub-efi [Fri Jan 03 14:02:14.540 2025] less [Fri Jan 03 14:02:14.540 2025] lib32-libgcc1 [Fri Jan 03 14:02:14.540 2025] lib32-libstdc++6 [Fri Jan 03 14:02:14.540 2025] libdw1 [Fri Jan 03 14:02:14.540 2025] libelf1 [Fri Jan 03 14:02:14.540 2025] libgcc1 [Fri Jan 03 14:02:14.540 2025] libgdbm-compat4 [Fri Jan 03 14:02:14.540 2025] libgdbm6 [Fri Jan 03 14:02:14.540 2025] libgmp10 [Fri Jan 03 14:02:14.540 2025] libidn2-0 [Fri Jan 03 14:02:14.540 2025] libreadline8 [Fri Jan 03 14:02:14.540 2025] libstdc++6 [Fri Jan 03 14:02:14.540 2025] libunistring2 [Fri Jan 03 14:02:14.540 2025] libvte-2.91-0 [Fri Jan 03 14:02:14.540 2025] nettle [Fri Jan 03 14:02:14.556 2025] onboard [Fri Jan 03 14:02:14.556 2025] parted [Fri Jan 03 14:02:14.556 2025] rxvt-unicode [Fri Jan 03 14:02:14.556 2025] [Fri Jan 03 14:02:14.556 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:02:14.556 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:02:14.568 2025] the opkg remove command. i.e.: [Fri Jan 03 14:02:14.572 2025] opkg remove [Fri Jan 03 14:02:14.572 2025] Where is the name printed in the list above [Fri Jan 03 14:02:14.572 2025] [Fri Jan 03 14:02:14.572 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:02:14.572 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:02:14.587 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:02:14.587 2025] also remove the dependent packages as well [Fri Jan 03 14:02:14.587 2025] *************************************************************** [Fri Jan 03 14:02:14.603 2025] *************************************************************** [Fri Jan 03 14:02:19.760 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:02:19.767 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:02:19.926 2025] [Fri Jan 03 14:02:19.931 2025] _____ _____ _ _ [Fri Jan 03 14:02:19.933 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:02:19.938 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:02:19.945 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:02:19.949 2025] |___| |___| [Fri Jan 03 14:02:19.955 2025] [Fri Jan 03 14:02:19.955 2025] Arago Project am62xx-evm - [Fri Jan 03 14:02:19.955 2025] [Fri Jan 03 14:02:19.955 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:02:19.960 2025] [Fri Jan 03 14:02:19.960 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:02:19.966 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:02:20.140 2025] [ 11.986557] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:02:20.146 2025] [ 11.986587] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:02:20.153 2025] [ 11.986605] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.160 2025] [ 11.986663] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:02:20.166 2025] [ 11.986668] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:02:20.172 2025] [ 11.986677] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.178 2025] [ 11.986712] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:02:20.185 2025] [ 11.986721] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:02:20.191 2025] [ 11.986728] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.199 2025] [ 11.986763] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:02:20.204 2025] [ 11.986769] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:02:20.211 2025] [ 11.986775] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.217 2025] [ 11.986811] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:02:20.224 2025] [ 11.986816] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:02:20.229 2025] [ 11.986822] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.235 2025] [ 11.986857] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:02:20.242 2025] [ 11.986864] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:02:20.246 2025] [ 11.986872] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.253 2025] [ 11.986907] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:02:20.259 2025] [ 11.986913] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:02:20.265 2025] [ 11.986920] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:20.271 2025] [ 11.986958] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:02:20.278 2025] [ 11.986964] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:02:20.286 2025] [ 11.986972] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.416 2025] [ 14.266323] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:02:22.416 2025] [ 14.266345] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:02:22.432 2025] [ 14.266363] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.432 2025] [ 14.266412] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:02:22.432 2025] [ 14.266417] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:02:22.448 2025] [ 14.266425] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.448 2025] [ 14.266462] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:02:22.463 2025] [ 14.266467] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:02:22.463 2025] [ 14.266474] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.463 2025] [ 14.266507] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:02:22.478 2025] [ 14.266513] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:02:22.478 2025] [ 14.266520] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.478 2025] [ 14.266553] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:02:22.496 2025] [ 14.266558] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:02:22.496 2025] [ 14.266564] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.510 2025] [ 14.266602] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:02:22.510 2025] [ 14.266607] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:02:22.510 2025] [ 14.266614] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.526 2025] [ 14.266647] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:02:22.526 2025] [ 14.266651] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:02:22.541 2025] [ 14.266659] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.541 2025] [ 14.266693] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:02:22.541 2025] [ 14.266697] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:02:22.557 2025] [ 14.266704] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:22.903 2025] [ 14.754352] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:02:26.197 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:02:26.205 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:02:28.011 2025] [ 19.860750] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:02:28.021 2025] [ 19.860775] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:02:28.021 2025] [ 19.860795] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.036 2025] [ 19.860871] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:02:28.036 2025] [ 19.860877] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:02:28.036 2025] [ 19.860889] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.036 2025] [ 19.860935] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:02:28.052 2025] [ 19.860940] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:02:28.052 2025] [ 19.860948] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.068 2025] [ 19.860989] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:02:28.068 2025] [ 19.860995] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:02:28.068 2025] [ 19.861002] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.083 2025] [ 19.861043] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:02:28.083 2025] [ 19.861048] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:02:28.099 2025] [ 19.861056] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.099 2025] [ 19.861094] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:02:28.111 2025] [ 19.861103] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:02:28.115 2025] [ 19.861846] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.115 2025] [ 19.862061] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:02:28.131 2025] [ 19.862071] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:02:28.131 2025] [ 19.862102] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.131 2025] [ 19.862251] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:02:28.146 2025] [ 19.862258] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:02:28.146 2025] [ 19.862272] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.162 2025] [ 19.926538] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:02:28.162 2025] [ 19.926562] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:02:28.162 2025] [ 19.926589] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.178 2025] [ 19.926659] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:02:28.178 2025] [ 19.926664] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:02:28.178 2025] [ 19.926672] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.193 2025] [ 19.926709] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:02:28.193 2025] [ 19.926715] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:02:28.209 2025] [ 19.926722] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.211 2025] [ 19.926759] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:02:28.211 2025] [ 19.926764] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:02:28.225 2025] [ 19.926772] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.225 2025] [ 19.926812] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:02:28.241 2025] [ 19.926817] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:02:28.241 2025] [ 19.926825] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.241 2025] [ 19.926859] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:02:28.256 2025] [ 19.926864] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:02:28.256 2025] [ 19.926870] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.272 2025] [ 19.926906] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:02:28.272 2025] [ 19.926911] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:02:28.288 2025] [ 19.926919] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:02:28.288 2025] [ 19.926959] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:02:28.288 2025] [ 19.926964] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:02:28.303 2025] [ 19.926971] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:00.712 2025] [Fri Jan 03 14:03:00.712 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:00.727 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:03:00.775 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:03:00.806 2025] Trying to boot from MMC1 [Fri Jan 03 14:03:00.979 2025] Authentication passed [Fri Jan 03 14:03:00.979 2025] Authentication passed [Fri Jan 03 14:03:00.979 2025] Authentication passed [Fri Jan 03 14:03:01.026 2025] Authentication passed [Fri Jan 03 14:03:01.026 2025] Authentication passed [Fri Jan 03 14:03:01.026 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:03:01.041 2025] [Fri Jan 03 14:03:01.047 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:03:01.047 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:03:01.347 2025] [Fri Jan 03 14:03:01.347 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:01.347 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:03:01.389 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:03:01.389 2025] Error: could not access storage. [Fri Jan 03 14:03:01.404 2025] Trying to boot from MMC1 [Fri Jan 03 14:03:01.548 2025] Authentication passed [Fri Jan 03 14:03:01.562 2025] Authentication passed [Fri Jan 03 14:03:02.208 2025] [Fri Jan 03 14:03:02.208 2025] [Fri Jan 03 14:03:02.208 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:02.224 2025] [Fri Jan 03 14:03:02.224 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:03:02.224 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:03:02.224 2025] DRAM: 2 GiB [Fri Jan 03 14:03:02.468 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:03:02.468 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:03:02.484 2025] Loading Environment from MMC... OK [Fri Jan 03 14:03:02.688 2025] In: serial [Fri Jan 03 14:03:02.688 2025] Out: serial [Fri Jan 03 14:03:02.688 2025] Err: serial [Fri Jan 03 14:03:02.688 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:03:02.688 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:03:02.853 2025] switch to partitions #0, OK [Fri Jan 03 14:03:02.853 2025] mmc0(part 0) is current device [Fri Jan 03 14:03:03.003 2025] SD/MMC found on device 0 [Fri Jan 03 14:03:03.003 2025] Running eMMC boot ... [Fri Jan 03 14:03:03.019 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:03:03.019 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:03:03.019 2025] Importing environment from mmc0 ... [Fri Jan 03 14:03:03.254 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:03:03.271 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:03:03.271 2025] Working FDT set to 88000000 [Fri Jan 03 14:03:03.271 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:03:03.287 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:03:03.287 2025] Working FDT set to 88000000 [Fri Jan 03 14:03:03.302 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:03:03.318 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:03:03.318 2025] Working FDT set to 8feed000 [Fri Jan 03 14:03:03.334 2025] [Fri Jan 03 14:03:03.334 2025] Starting kernel ... [Fri Jan 03 14:03:03.334 2025] [Fri Jan 03 14:03:03.365 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:03:03.381 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:03:03.397 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:03:03.397 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:03:03.491 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:03:03.491 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:03:03.507 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:03:03.507 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:03:03.522 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:03:03.522 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:03:03.538 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:03:03.538 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:03:03.554 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:03:03.554 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:03:03.570 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:03:03.585 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:03:03.585 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:03:03.603 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:03:03.612 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:03:03.618 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:03:03.624 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:03:03.624 2025] [ 0.000000] Normal empty [Fri Jan 03 14:03:03.630 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:03:03.635 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:03:03.639 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:03:03.644 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:03:03.651 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:03:03.657 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:03:03.663 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:03:03.669 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:03:03.675 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:03:03.683 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:03:03.689 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:03:03.695 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:03:03.700 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:03:03.704 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:03:03.709 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:03:03.714 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:03:03.720 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:03:03.726 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:03:03.731 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:03:03.736 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:03:03.742 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:03:03.748 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:03:03.755 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:03:03.761 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:03:03.767 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:03:03.813 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:03:03.822 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:03:03.830 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:03:03.838 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:03:03.845 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:03:03.862 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:03:03.869 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:03:03.875 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:03:03.881 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:03:03.886 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:03:03.893 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:03:03.899 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:03:03.906 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:03:03.914 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:03:03.918 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:03:03.923 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:03:03.928 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:03:03.933 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:03:03.938 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:03:03.943 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:03:03.948 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:03:03.954 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:03:03.960 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:03:03.968 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:03:03.975 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:03:03.983 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:03:03.988 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:03:03.994 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:03:04.000 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:03:04.006 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:03:04.017 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:03:04.024 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:03:04.034 2025] [ 0.528883] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:03:04.042 2025] [ 0.528892] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:03:04.048 2025] [ 0.528974] LSM: Security Framework initializing [Fri Jan 03 14:03:04.054 2025] [ 0.529113] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:03:04.061 2025] [ 0.529137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:03:04.067 2025] [ 0.530810] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:03:04.073 2025] [ 0.530816] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:03:04.080 2025] [ 0.530861] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:03:04.086 2025] [ 0.583316] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:03:04.092 2025] [ 0.583562] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:03:04.104 2025] [ 0.583651] EFI services will not be available. [Fri Jan 03 14:03:04.106 2025] [ 0.583902] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:03:04.112 2025] [ 0.584676] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:03:04.117 2025] [ 0.584787] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:03:04.123 2025] [ 0.584804] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:03:04.130 2025] [ 0.584859] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:03:04.136 2025] [ 0.634953] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:03:04.141 2025] [ 0.635043] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:03:04.148 2025] [ 0.635055] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:03:04.154 2025] [ 0.635088] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:03:04.164 2025] [ 0.660978] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:03:04.166 2025] [ 0.661061] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:03:04.172 2025] [ 0.661073] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:03:04.180 2025] [ 0.661104] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:03:04.187 2025] [ 0.661163] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:03:04.193 2025] [ 0.661169] SMP: Total of 4 processors activated. [Fri Jan 03 14:03:04.202 2025] [ 0.695357] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:03:04.204 2025] [ 0.695360] CPU features: detected: CRC32 instructions [Fri Jan 03 14:03:04.209 2025] [ 0.695406] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:03:04.217 2025] [ 0.695408] alternatives: applying system-wide alternatives [Fri Jan 03 14:03:04.219 2025] [ 0.696881] devtmpfs: initialized [Fri Jan 03 14:03:04.225 2025] [ 0.708589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:03:04.231 2025] [ 0.708613] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:03:04.237 2025] [ 0.713831] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:03:04.244 2025] [ 0.714563] DMI not present or invalid. [Fri Jan 03 14:03:04.249 2025] [ 0.715081] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:03:04.256 2025] [ 0.734049] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:03:04.262 2025] [ 0.734331] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:03:04.270 2025] [ 0.734541] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:03:04.276 2025] [ 0.734650] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:03:04.282 2025] [ 0.734783] audit: type=2000 audit(0.732:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:03:04.289 2025] [ 0.735349] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:03:04.295 2025] [ 0.735353] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:03:04.305 2025] [ 0.735592] ASID allocator initialised with 65536 entries [Fri Jan 03 14:03:04.307 2025] [ 0.750520] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:03:04.314 2025] [ 0.759523] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:04.321 2025] [ 0.759533] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:03:04.328 2025] [ 0.759538] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:04.335 2025] [ 0.759540] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:03:04.342 2025] [ 0.759565] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:04.348 2025] [ 0.759568] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:03:04.355 2025] [ 0.759571] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:04.362 2025] [ 0.759575] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:03:04.369 2025] [ 0.760845] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:03:04.377 2025] [ 0.761304] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:03:04.384 2025] [ 0.761322] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:03:04.391 2025] [ 0.761336] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:03:04.400 2025] [ 0.761351] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:03:04.409 2025] [ 0.761363] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.416 2025] [ 0.761369] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:03:04.423 2025] [ 0.761595] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:03:04.430 2025] [ 0.761600] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:03:04.437 2025] [ 0.761610] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:03:04.445 2025] [ 0.761622] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:03:04.453 2025] [ 0.761630] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.462 2025] [ 0.761634] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:03:04.469 2025] [ 0.761856] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:03:04.476 2025] [ 0.761861] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:03:04.483 2025] [ 0.761875] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:03:04.490 2025] [ 0.761887] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:03:04.499 2025] [ 0.761895] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.506 2025] [ 0.761899] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:03:04.514 2025] [ ‚rº²’Š’ªêreg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:03:04.522 2025] [ 1.02081[7] printk: console [ttyS2] printing thread started [Fri Jan 03 14:03:04.531 2025] 0.762130] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:03:04.539 2025] [ 1.020840] printk: console [ttyS2] enabled [Fri Jan 03 14:03:04.539 2025] [ 1.020844] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:03:04.547 2025] [ 1.033597] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:03:04.554 2025] [ 1.034881] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:03:04.561 2025] [ 1.034892] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:03:04.568 2025] [ 1.034904] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:03:04.577 2025] [ 1.034920] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:03:04.585 2025] [ 1.034933] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.593 2025] [ 1.034938] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:03:04.600 2025] [ 1.034969] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:03:04.608 2025] [ 1.035904] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:03:04.616 2025] [ 1.035912] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:03:04.622 2025] [ 1.035925] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:03:04.631 2025] [ 1.035940] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:03:04.638 2025] [ 1.035950] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.645 2025] [ 1.035954] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:03:04.653 2025] [ 1.038986] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:03:04.661 2025] [ 1.045261] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:03:04.668 2025] [ 1.052043] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:03:04.674 2025] [ 1.052473] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:03:04.680 2025] [ 1.052479] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:03:04.686 2025] [ 1.052493] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:03:04.694 2025] [ 1.052510] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:03:04.703 2025] [ 1.052523] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.711 2025] [ 1.052528] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:03:04.718 2025] [ 1.085788] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:03:04.725 2025] [ 1.086082] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:03:04.733 2025] [ 1.086896] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:03:04.740 2025] [ 1.086904] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:03:04.747 2025] [ 1.086916] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:03:04.757 2025] [ 1.086939] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:03:04.773 2025] [ 1.086958] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.775 2025] [ 1.086963] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:03:04.782 2025] [ 1.087715] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:03:04.791 2025] [ 1.087764] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:03:04.801 2025] [ 1.088069] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:03:04.809 2025] [ 1.088082] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:03:04.817 2025] [ 1.088088] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:03:04.824 2025] [ 1.088884] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:03:04.832 2025] [ 1.105293] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:03:04.838 2025] [ 1.110100] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:03:04.846 2025] [ 1.110157] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:04.852 2025] [ 1.110164] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:04.860 2025] [ 1.110177] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:03:04.868 2025] [ 1.110201] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:03:04.878 2025] [ 1.110213] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.888 2025] [ 1.110221] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:04.891 2025] [ 1.110243] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:03:04.898 2025] [ 1.110248] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:04.904 2025] [ 1.110262] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:04.916 2025] [ 1.110276] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:04.922 2025] [ 1.110285] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.929 2025] [ 1.110292] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:03:04.935 2025] [ 1.110296] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:04.941 2025] [ 1.110331] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:04.947 2025] [ 1.110340] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:04.958 2025] [ 1.110353] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:04.972 2025] [ 1.110363] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:04.974 2025] [ 1.110382] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:04.980 2025] [ 1.110949] mmc1: CQHCI version 5.10 [Fri Jan 03 14:03:04.986 2025] [ 1.111392] mmc0: CQHCI version 5.10 [Fri Jan 03 14:03:04.992 2025] [ 1.113618] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:04.997 2025] [ 1.113637] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:05.003 2025] [ 1.113652] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:03:05.009 2025] [ 1.113675] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:03:05.022 2025] [ 1.113687] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:05.029 2025] [ 1.113693] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:05.039 2025] [ 1.114113] mmc2: CQHCI version 5.10 [Fri Jan 03 14:03:05.050 2025] [ 1.114194] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:03:05.060 2025] [ 1.116612] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:03:05.068 2025] [ 1.119641] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:03:05.074 2025] [ 1.119859] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:03:05.081 2025] [ 1.119923] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:03:05.087 2025] [ 1.123031] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:03:05.094 2025] [ 1.123235] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:03:05.100 2025] [ 1.123298] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:03:05.106 2025] [ 1.124898] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:03:05.112 2025] [ 1.124908] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:03:05.119 2025] [ 1.124935] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:03:05.127 2025] [ 1.124952] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:03:05.133 2025] [ 1.124964] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:03:05.140 2025] [ 1.124968] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:03:05.147 2025] [ 1.124976] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:03:05.160 2025] [ 1.124990] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:03:05.169 2025] [ 1.124999] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:03:05.175 2025] [ 1.125003] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:03:05.179 2025] [ 1.125428] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:03:05.185 2025] [ 1.125433] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:03:05.192 2025] [ 1.125445] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:03:05.201 2025] [ 1.125456] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:03:05.208 2025] [ 1.125461] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:03:05.214 2025] [ 1.125964] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:03:05.222 2025] [ 1.125976] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:03:05.229 2025] [ 1.125979] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:03:05.234 2025] [ 1.126083] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:03:05.241 2025] [ 1.126095] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:03:05.249 2025] [ 1.126098] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:03:05.254 2025] [ 1.126159] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:03:05.261 2025] [ 1.126170] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:05.267 2025] [ 1.126173] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:03:05.273 2025] [ 1.126867] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:03:05.280 2025] [ 1.129712] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:03:05.287 2025] [ 1.141825] ALSA device list: [Fri Jan 03 14:03:05.293 2025] [ 1.141834] No soundcards found. [Fri Jan 03 14:03:05.294 2025] [ 1.146108] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:03:05.301 2025] [ 1.151054] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:03:05.311 2025] [ 1.158618] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:03:05.320 2025] [ 1.158792] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:03:05.327 2025] [ 1.204761] mmc1: new MMC card at address 0001 [Fri Jan 03 14:03:05.333 2025] [ 1.205608] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:03:05.337 2025] [ 1.213531] mmcblk1: p1 [Fri Jan 03 14:03:05.342 2025] [ 1.214350] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:03:05.347 2025] [ 1.216067] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:03:05.352 2025] [ 1.217439] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:03:05.356 2025] [ 1.255731] mmc0: Command Queue Engine enabled [Fri Jan 03 14:03:05.362 2025] [ 1.255750] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:03:05.367 2025] [ 1.256497] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:03:05.372 2025] [ 1.260535] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:03:05.378 2025] [ 1.261602] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:03:05.382 2025] [ 1.262952] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:03:05.383 2025] [ 1.264071] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:03:05.389 2025] [ 1.288481] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:03:05.395 2025] [ 1.288863] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:05.401 2025] [ 1.288949] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:03:05.407 2025] [ 1.289097] devtmpfs: mounted [Fri Jan 03 14:03:05.411 2025] [ 1.290514] Freeing unused kernel memory: 1856K [Fri Jan 03 14:03:05.416 2025] [ 1.290632] Run /sbin/init as init process [Fri Jan 03 14:03:05.421 2025] [ 1.290636] with arguments: [Fri Jan 03 14:03:05.425 2025] [ 1.290637] /sbin/init [Fri Jan 03 14:03:05.426 2025] [ 1.290639] with environment: [Fri Jan 03 14:03:05.430 2025] [ 1.290641] HOME=/ [Fri Jan 03 14:03:05.430 2025] [ 1.290642] TERM=linux [Fri Jan 03 14:03:05.435 2025] [ 1.290644] syntec_extend= [Fri Jan 03 14:03:05.439 2025] [ 1.382326] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:03:05.444 2025] [ 1.403565] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:03:05.449 2025] [ 1.404848] Segment Routing with IPv6 [Fri Jan 03 14:03:05.454 2025] [ 1.404882] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:03:05.459 2025] [ 1.447515] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:03:05.484 2025] [ 1.448096] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:03:05.490 2025] [ 1.451301] systemd[1]: Hostname set to . [Fri Jan 03 14:03:05.496 2025] [ 1.559035] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:03:05.519 2025] [ 1.866578] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:03:05.537 2025] [ 1.869306] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:03:05.554 2025] [ 1.932143] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:03:05.562 2025] [ 1.935347] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:03:05.568 2025] [ 1.936886] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:03:05.574 2025] [ 1.937358] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:03:05.580 2025] [ 1.937688] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:03:05.587 2025] [ 1.937948] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:03:05.596 2025] [ 1.938355] systemd[1]: Reached target Path Units. [Fri Jan 03 14:03:05.602 2025] [ 1.938455] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:03:05.610 2025] [ 1.938522] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:03:05.614 2025] [ 1.938613] systemd[1]: Reached target Swaps. [Fri Jan 03 14:03:05.620 2025] [ 1.942841] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:03:05.626 2025] [ 1.943013] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:03:05.630 2025] [ 1.949119] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:03:05.637 2025] [ 1.949595] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:03:05.643 2025] [ 1.950446] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:03:05.647 2025] [ 1.950997] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:03:05.654 2025] [ 1.951492] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:03:05.660 2025] [ 1.952339] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:03:05.665 2025] [ 1.954198] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:03:05.671 2025] [ 1.954712] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:03:05.677 2025] [ 1.955213] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:03:05.684 2025] [ 2.019510] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:03:05.690 2025] [ 2.023610] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:03:05.696 2025] [ 2.028005] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:03:05.702 2025] [ 2.028901] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:03:05.714 2025] [ 2.030103] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:03:05.725 2025] [ 2.034083] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:03:05.727 2025] [ 2.040091] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:03:05.734 2025] [ 2.047152] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:03:05.740 2025] [ 2.052581] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:03:05.746 2025] [ 2.057543] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:03:05.752 2025] [ 2.063846] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:03:05.759 2025] [ 2.064386] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:03:05.768 2025] [ 2.065839] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:03:05.781 2025] [ 2.065870] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:03:05.790 2025] [ 2.069385] systemd[1]: Starting Journal Service... [Fri Jan 03 14:03:05.796 2025] [ 2.076363] fuse: init (API version 7.37) [Fri Jan 03 14:03:05.802 2025] [ 2.078457] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:03:05.806 2025] [ 2.083814] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:03:05.813 2025] [ 2.089074] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:03:05.819 2025] [ 2.094257] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:03:05.825 2025] [ 2.099305] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:03:05.831 2025] [ 2.132855] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:03:05.837 2025] [ 2.134300] systemd[1]: Started RPC Bind. [Fri Jan 03 14:03:05.844 2025] [ 2.135560] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:03:05.848 2025] [ 2.136530] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:03:05.854 2025] [ 2.137526] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:03:05.860 2025] [ 2.138385] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:03:05.864 2025] [ 2.141164] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:03:05.871 2025] [ 2.143352] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:03:05.875 2025] [ 2.148391] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:03:05.882 2025] [ 2.150296] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:03:05.887 2025] [ 2.155258] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:03:05.893 2025] [ 2.160989] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:03:05.899 2025] [ 2.167655] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:03:05.905 2025] [ 2.171705] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:03:05.911 2025] [ 2.172470] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:03:05.917 2025] [ 2.173915] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:03:05.923 2025] [ 2.175334] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:03:05.929 2025] [ 2.176931] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:03:05.935 2025] [ 2.215628] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:03:05.942 2025] [ 2.219617] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:03:05.949 2025] [ 2.222604] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:03:05.957 2025] [ 2.223170] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:03:05.973 2025] [ 2.232884] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:03:05.979 2025] [ 2.233479] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:03:05.989 2025] [ 2.241823] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:03:05.996 2025] [ 2.255433] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:03:06.002 2025] [ 2.256486] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:03:06.008 2025] [ 2.257386] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:03:06.014 2025] [ 2.285838] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:03:06.020 2025] [ 2.294417] systemd[1]: Started Journal Service. [Fri Jan 03 14:03:06.029 2025] [ 2.342500] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:03:06.242 2025] [ 2.741843] random: crng init done [Fri Jan 03 14:03:06.339 2025] [ 2.838659] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:03:06.354 2025] [ 2.838684] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:03:06.376 2025] [ 2.838698] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:03:06.401 2025] [ 2.838736] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:03:06.458 2025] [ 2.838758] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:03:06.483 2025] [ 2.854342] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:03:06.525 2025] [ 2.854360] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:03:06.547 2025] [ 2.854391] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:03:06.560 2025] [ 2.854420] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:03:06.572 2025] [ 2.854433] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:03:06.576 2025] [ 2.854437] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:03:06.586 2025] [ 2.854448] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:03:06.632 2025] [ 2.854463] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:03:06.643 2025] [ 2.854470] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:03:06.646 2025] [ 2.854474] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:03:06.658 2025] [ 2.854484] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:03:06.674 2025] [ 2.854495] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:03:06.678 2025] [ 2.864711] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:03:06.684 2025] [ 2.864728] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:03:06.697 2025] [ 2.864755] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:03:06.703 2025] [ 2.864758] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:03:06.714 2025] [ 2.864834] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:03:06.724 2025] [ 2.891676] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:03:06.730 2025] [ 2.892768] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:33:24 UTC (1681065204) [Fri Jan 03 14:03:06.752 2025] [ 2.898580] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:03:06.779 2025] [ 2.898603] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:03:06.800 2025] [ 2.976201] mc: Linux media interface: v0.10 [Fri Jan 03 14:03:06.809 2025] [ 2.990257] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:03:06.820 2025] [ 3.102536] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:03:06.830 2025] [ 3.102755] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:03:06.837 2025] [ 3.103131] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:03:06.844 2025] [ 3.103978] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:03:06.850 2025] [ 3.107636] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:03:06.860 2025] [ 3.107674] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:03:06.867 2025] [ 3.107712] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:03:06.878 2025] [ 3.107719] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:03:06.916 2025] [ 3.415724] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:03:06.997 2025] [ 3.496289] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:03:07.006 2025] [ 3.496341] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:03:07.016 2025] [ 3.496347] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:03:07.027 2025] [ 3.496376] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:03:07.038 2025] [ 3.496409] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:03:07.044 2025] [ 3.496427] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:07.051 2025] [ 3.496433] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:03:07.062 2025] [ 3.501112] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:03:07.070 2025] [ 3.501861] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:03:07.077 2025] [ 3.502068] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:03:07.086 2025] [ 3.502496] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:03:07.092 2025] [ 3.502589] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:03:07.102 2025] [ 3.521149] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:03:07.105 2025] [ 3.521189] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:03:07.117 2025] [ 3.522201] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:03:07.121 2025] [ 3.522255] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:03:07.127 2025] [ 3.522263] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:03:07.135 2025] [ 3.522337] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:03:07.151 2025] [ 3.522575] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:03:07.163 2025] [ 3.632217] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:03:07.170 2025] [ 3.632970] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:03:07.176 2025] [ 3.633004] Get kick_gpio number= (418) [Fri Jan 03 14:03:07.435 2025] [ 3.934054] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:03:07.547 2025] [ 4.047358] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:03:07.556 2025] [ 4.048970] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:03:07.566 2025] [ 4.049009] cfg80211: failed to load regulatory.db [Fri Jan 03 14:03:07.665 2025] [ 4.165230] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:03:07.693 2025] [ 4.165271] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:03:08.107 2025] [ 4.599124] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:03:08.107 2025] [ 4.599150] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:03:08.115 2025] [ 4.599167] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:03:08.138 2025] [ 4.599197] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:03:08.163 2025] [ 4.599219] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:03:08.176 2025] [ 4.599225] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:03:08.179 2025] [ 4.636492] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:03:08.194 2025] [ 4.693213] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:03:08.231 2025] [ 4.728059] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:03:08.477 2025] [ 4.977176] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:03:08.573 2025] [ 5.073731] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:03:08.583 2025] [ 5.083192] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:03:08.596 2025] [ 5.083435] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:03:08.605 2025] [ 5.083446] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:03:08.614 2025] [ 5.100956] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:03:08.620 2025] [ 5.106404] hub 1-0:1.0: USB hub found [Fri Jan 03 14:03:08.628 2025] [ 5.106480] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:03:08.853 2025] [ 5.348925] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:03:09.014 2025] [ 5.512883] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:03:09.032 2025] [ 5.524098] hub 1-1:1.0: USB hub found [Fri Jan 03 14:03:09.046 2025] [ 5.527626] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:03:09.085 2025] [ 5.585616] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:03:09.119 2025] [ 5.585648] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:03:09.327 2025] [ 5.823758] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:03:09.341 2025] [ 5.823834] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:09.355 2025] [ 5.845499] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:03:09.363 2025] [ 5.845564] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:09.382 2025] [ 5.881753] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:03:09.415 2025] [ 5.914446] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:03:09.424 2025] [ 5.914488] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:09.464 2025] [ 5.964143] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:03:09.476 2025] [ 5.964744] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:09.485 2025] *************************************************************** [Fri Jan 03 14:03:09.492 2025] *************************************************************** [Fri Jan 03 14:03:09.498 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:03:09.504 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:03:09.510 2025] bash [Fri Jan 03 14:03:09.510 2025] cifs-utils [Fri Jan 03 14:03:09.514 2025] dosfstools [Fri Jan 03 14:03:09.515 2025] grub-common [Fri Jan 03 14:03:09.515 2025] grub-editenv [Fri Jan 03 14:03:09.515 2025] grub-efi [Fri Jan 03 14:03:09.515 2025] less [Fri Jan 03 14:03:09.519 2025] lib32-libgcc1 [Fri Jan 03 14:03:09.520 2025] lib32-libstdc++6 [Fri Jan 03 14:03:09.520 2025] libdw1 [Fri Jan 03 14:03:09.520 2025] libelf1 [Fri Jan 03 14:03:09.524 2025] libgcc1 [Fri Jan 03 14:03:09.525 2025] libgdbm-compat4 [Fri Jan 03 14:03:09.525 2025] libgdbm6 [Fri Jan 03 14:03:09.525 2025] libgmp10 [Fri Jan 03 14:03:09.525 2025] libidn2-0 [Fri Jan 03 14:03:09.529 2025] libreadline8 [Fri Jan 03 14:03:09.529 2025] libstdc++6 [Fri Jan 03 14:03:09.529 2025] libunistring2 [Fri Jan 03 14:03:09.530 2025] libvte-2.91-0 [Fri Jan 03 14:03:09.534 2025] nettle [Fri Jan 03 14:03:09.534 2025] onboard [Fri Jan 03 14:03:09.534 2025] parted [Fri Jan 03 14:03:09.534 2025] rxvt-unicode [Fri Jan 03 14:03:09.535 2025] [Fri Jan 03 14:03:09.535 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:03:09.541 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:03:09.547 2025] the opkg remove command. i.e.: [Fri Jan 03 14:03:09.547 2025] opkg remove [Fri Jan 03 14:03:09.551 2025] Where is the name printed in the list above [Fri Jan 03 14:03:09.557 2025] [Fri Jan 03 14:03:09.557 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:03:09.562 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:03:09.568 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:03:09.574 2025] also remove the dependent packages as well [Fri Jan 03 14:03:09.579 2025] *************************************************************** [Fri Jan 03 14:03:09.584 2025] *************************************************************** [Fri Jan 03 14:03:10.105 2025] [ 6.604192] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:03:10.110 2025] [ 6.605451] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:03:14.435 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:03:14.441 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:03:14.624 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:03:14.630 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:03:14.803 2025] [ 11.303032] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:03:14.814 2025] [ 11.303062] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:03:14.817 2025] [ 11.303082] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.824 2025] [ 11.303142] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:03:14.830 2025] [ 11.303147] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:03:14.836 2025] [ 11.303154] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.843 2025] [ 11.303189] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:14.849 2025] [ 11.303194] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:03:14.856 2025] [ 11.303201] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.862 2025] [ 11.303235] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:03:14.868 2025] [ 11.303240] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:03:14.873 2025] [ 11.303247] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.880 2025] [ 11.303283] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:03:14.885 2025] [ 11.303288] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:03:14.891 2025] [ 11.303295] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.897 2025] [ 11.303329] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:03:14.903 2025] [ 11.303334] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:03:14.909 2025] [ 11.303341] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.915 2025] [ 11.303376] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:03:14.921 2025] [ 11.303381] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:03:14.927 2025] [ 11.303387] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:14.933 2025] [ 11.303420] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:03:14.940 2025] [ 11.303429] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:03:14.948 2025] [ 11.303437] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:15.043 2025] [Fri Jan 03 14:03:15.047 2025] _____ _____ _ _ [Fri Jan 03 14:03:15.049 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:03:15.055 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:03:15.061 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:03:15.067 2025] |___| |___| [Fri Jan 03 14:03:15.073 2025] [Fri Jan 03 14:03:15.073 2025] Arago Project am62xx-evm - [Fri Jan 03 14:03:15.078 2025] [Fri Jan 03 14:03:15.078 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:03:15.078 2025] [Fri Jan 03 14:03:15.078 2025] am62xx-evm login: [ 13.582224] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:03:17.092 2025] [ 13.582251] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:03:17.098 2025] [ 13.582267] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.101 2025] [ 13.582317] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:03:17.108 2025] [ 13.582325] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:03:17.114 2025] [ 13.582333] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.120 2025] [ 13.582368] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:17.126 2025] [ 13.582373] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:03:17.134 2025] [ 13.582380] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.140 2025] [ 13.582415] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:03:17.146 2025] [ 13.582420] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:03:17.152 2025] [ 13.582428] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.158 2025] [ 13.582460] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:03:17.165 2025] [ 13.582466] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:03:17.171 2025] [ 13.582474] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.176 2025] [ 13.582507] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:03:17.182 2025] [ 13.582512] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:03:17.189 2025] [ 13.582519] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.195 2025] [ 13.582556] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:03:17.201 2025] [ 13.582561] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:03:17.208 2025] [ 13.582568] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.213 2025] [ 13.582602] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:03:17.219 2025] [ 13.582607] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:03:17.225 2025] [ 13.582617] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:17.616 2025] [ 14.108707] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:03:20.900 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:03:20.904 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:03:22.710 2025] [ 19.202518] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:03:22.713 2025] [ 19.202542] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:03:22.719 2025] [ 19.202566] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.725 2025] [ 19.202618] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:03:22.732 2025] [ 19.202623] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:03:22.740 2025] [ 19.202633] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.744 2025] [ 19.202669] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:22.752 2025] [ 19.202674] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:03:22.757 2025] [ 19.202681] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.763 2025] [ 19.202718] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:03:22.773 2025] [ 19.202723] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:03:22.775 2025] [ 19.202731] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.781 2025] [ 19.202765] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:03:22.788 2025] [ 19.202848] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:03:22.794 2025] [ 19.202862] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.800 2025] [ 19.202904] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:03:22.807 2025] [ 19.202909] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:03:22.813 2025] [ 19.202916] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.820 2025] [ 19.202954] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:03:22.828 2025] [ 19.202959] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:03:22.831 2025] [ 19.202967] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.838 2025] [ 19.203005] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:03:22.844 2025] [ 19.203011] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:03:22.850 2025] [ 19.203018] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.857 2025] [ 19.274503] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:03:22.863 2025] [ 19.274533] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:03:22.869 2025] [ 19.274552] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.877 2025] [ 19.274613] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:03:22.882 2025] [ 19.274618] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:03:22.889 2025] [ 19.274629] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.893 2025] [ 19.274665] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:22.898 2025] [ 19.274672] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:03:22.905 2025] [ 19.274679] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.912 2025] [ 19.274713] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:03:22.917 2025] [ 19.274718] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:03:22.923 2025] [ 19.274725] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.932 2025] [ 19.274761] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:03:22.935 2025] [ 19.274766] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:03:22.941 2025] [ 19.274931] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.948 2025] [ 19.274993] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:03:22.954 2025] [ 19.274999] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:03:22.960 2025] [ 19.275007] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.967 2025] [ 19.275046] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:03:22.972 2025] [ 19.275051] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:03:22.979 2025] [ 19.275058] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:22.985 2025] [ 19.275093] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:03:22.991 2025] [ 19.275098] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:03:22.997 2025] [ 19.275104] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:03:55.413 2025] [Fri Jan 03 14:03:55.413 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:55.432 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:03:55.481 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:03:55.503 2025] Trying to boot from MMC1 [Fri Jan 03 14:03:55.670 2025] Authentication passed [Fri Jan 03 14:03:55.677 2025] Authentication passed [Fri Jan 03 14:03:55.686 2025] Authentication passed [Fri Jan 03 14:03:55.718 2025] Authentication passed [Fri Jan 03 14:03:55.718 2025] Authentication passed [Fri Jan 03 14:03:55.733 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:03:55.733 2025] [Fri Jan 03 14:03:55.733 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:03:55.733 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:03:56.032 2025] [Fri Jan 03 14:03:56.032 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:56.047 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:03:56.079 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:03:56.079 2025] Error: could not access storage. [Fri Jan 03 14:03:56.095 2025] Trying to boot from MMC1 [Fri Jan 03 14:03:56.253 2025] Authentication passed [Fri Jan 03 14:03:56.253 2025] Authentication passed [Fri Jan 03 14:03:56.913 2025] [Fri Jan 03 14:03:56.913 2025] [Fri Jan 03 14:03:56.913 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:03:56.913 2025] [Fri Jan 03 14:03:56.913 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:03:56.913 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:03:56.913 2025] DRAM: 2 GiB [Fri Jan 03 14:03:57.164 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:03:57.164 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:03:57.182 2025] Loading Environment from MMC... OK [Fri Jan 03 14:03:57.383 2025] In: serial [Fri Jan 03 14:03:57.383 2025] Out: serial [Fri Jan 03 14:03:57.383 2025] Err: serial [Fri Jan 03 14:03:57.383 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:03:57.383 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:03:57.540 2025] switch to partitions #0, OK [Fri Jan 03 14:03:57.556 2025] mmc0(part 0) is current device [Fri Jan 03 14:03:57.700 2025] SD/MMC found on device 0 [Fri Jan 03 14:03:57.704 2025] Running eMMC boot ... [Fri Jan 03 14:03:57.722 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:03:57.728 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:03:57.731 2025] Importing environment from mmc0 ... [Fri Jan 03 14:03:57.950 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:03:57.974 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:03:57.977 2025] Working FDT set to 88000000 [Fri Jan 03 14:03:57.982 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:03:57.986 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:03:57.994 2025] Working FDT set to 88000000 [Fri Jan 03 14:03:58.014 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:03:58.021 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:03:58.028 2025] Working FDT set to 8feed000 [Fri Jan 03 14:03:58.038 2025] [Fri Jan 03 14:03:58.038 2025] Starting kernel ... [Fri Jan 03 14:03:58.043 2025] [Fri Jan 03 14:03:58.075 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:03:58.081 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:03:58.103 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:03:58.109 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:03:58.197 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:03:58.202 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:03:58.209 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:03:58.215 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:03:58.223 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:03:58.230 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:03:58.240 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:03:58.247 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:03:58.257 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:03:58.265 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:03:58.275 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:03:58.282 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:03:58.295 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:03:58.300 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:03:58.309 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:03:58.315 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:03:58.323 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:03:58.323 2025] [ 0.000000] Normal empty [Fri Jan 03 14:03:58.328 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:03:58.333 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:03:58.337 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:03:58.343 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:03:58.348 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:03:58.354 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:03:58.361 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:03:58.370 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:03:58.373 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:03:58.379 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:03:58.384 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:03:58.390 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:03:58.397 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:03:58.404 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:03:58.409 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:03:58.414 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:03:58.419 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:03:58.425 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:03:58.426 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:03:58.432 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:03:58.438 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:03:58.445 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:03:58.450 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:03:58.456 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:03:58.462 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:03:58.510 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:03:58.519 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:03:58.527 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:03:58.535 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:03:58.543 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:03:58.559 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:03:58.568 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:03:58.572 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:03:58.579 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:03:58.584 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:03:58.590 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:03:58.597 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:03:58.604 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:03:58.610 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:03:58.620 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:03:58.620 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:03:58.625 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:03:58.630 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:03:58.637 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:03:58.642 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:03:58.647 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:03:58.652 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:03:58.659 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:03:58.665 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:03:58.671 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:03:58.678 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:03:58.684 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:03:58.689 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:03:58.696 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:03:58.702 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:03:58.713 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:03:58.721 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:03:58.727 2025] [ 0.528878] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:03:58.742 2025] [ 0.528889] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:03:58.744 2025] [ 0.528973] LSM: Security Framework initializing [Fri Jan 03 14:03:58.750 2025] [ 0.529107] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:03:58.756 2025] [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:03:58.767 2025] [ 0.530824] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:03:58.769 2025] [ 0.530831] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:03:58.776 2025] [ 0.530874] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:03:58.783 2025] [ 0.583329] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:03:58.789 2025] [ 0.583573] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:03:58.797 2025] [ 0.583660] EFI services will not be available. [Fri Jan 03 14:03:58.803 2025] [ 0.583923] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:03:58.809 2025] [ 0.584692] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:03:58.814 2025] [ 0.584804] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:03:58.820 2025] [ 0.584821] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:03:58.827 2025] [ 0.584878] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:03:58.833 2025] [ 0.634964] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:03:58.839 2025] [ 0.635050] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:03:58.846 2025] [ 0.635064] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:03:58.852 2025] [ 0.635095] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:03:58.858 2025] [ 0.660978] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:03:58.864 2025] [ 0.661061] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:03:58.870 2025] [ 0.661075] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:03:58.878 2025] [ 0.661107] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:03:58.884 2025] [ 0.661162] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:03:58.890 2025] [ 0.661168] SMP: Total of 4 processors activated. [Fri Jan 03 14:03:58.899 2025] [ 0.695356] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:03:58.902 2025] [ 0.695360] CPU features: detected: CRC32 instructions [Fri Jan 03 14:03:58.909 2025] [ 0.695406] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:03:58.910 2025] [ 0.695408] alternatives: applying system-wide alternatives [Fri Jan 03 14:03:58.915 2025] [ 0.696931] devtmpfs: initialized [Fri Jan 03 14:03:58.920 2025] [ 0.708578] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:03:58.927 2025] [ 0.708604] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:03:58.935 2025] [ 0.713764] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:03:58.941 2025] [ 0.714590] DMI not present or invalid. [Fri Jan 03 14:03:58.947 2025] [ 0.715128] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:03:58.953 2025] [ 0.729134] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:03:58.959 2025] [ 0.729415] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:03:58.966 2025] [ 0.729606] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:03:58.973 2025] [ 0.729750] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:03:58.979 2025] [ 0.729941] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:03:58.986 2025] [ 0.730571] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:03:58.993 2025] [ 0.730576] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:03:58.999 2025] [ 0.730827] ASID allocator initialised with 65536 entries [Fri Jan 03 14:03:59.006 2025] [ 0.745757] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:03:59.012 2025] [ 0.754917] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:59.018 2025] [ 0.754928] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:03:59.028 2025] [ 0.754932] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:59.034 2025] [ 0.754935] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:03:59.040 2025] [ 0.754939] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:59.046 2025] [ 0.754941] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:03:59.052 2025] [ 0.754945] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:03:59.059 2025] [ 0.754948] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:03:59.066 2025] [ 0.756105] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:03:59.074 2025] [ 0.756615] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.081 2025] [ 0.756622] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:03:59.087 2025] [ 0.756635] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:03:59.096 2025] [ 0.756651] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:03:59.106 2025] [ 0.756662] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.113 2025] [ 0.756668] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:03:59.123 2025] [ 0.756891] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.130 2025] [ 0.756897] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:03:59.136 2025] [ 0.756906] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:03:59.143 2025] [ 0.756918] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:03:59.150 2025] [ 0.756927] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.159 2025] [ 0.756931] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:03:59.169 2025] [ 0.757187] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.172 2025] [ 0.757191] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:03:59.180 2025] [ 0.757204] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:03:59.191 2025] [ 0.757217] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:03:59.196 2025] [ 0.757225] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.204 2025] [ 0.757229] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:03:59.215 2025] [ 0.757446] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.219 2025] [ [ 1.020908] printk: console [ttyS2] printing thread started [Fri Jan 03 14:03:59.225 2025] 0.757451] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:03:59.232 2025] [ 1.020923] printk: console [ttyS2] enabled [Fri Jan 03 14:03:59.238 2025] [ 1.020927] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:03:59.244 2025] [ 1.033681] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:03:59.249 2025] [ 1.034872] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:03:59.255 2025] [ 1.034882] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:03:59.262 2025] [ 1.034895] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:03:59.270 2025] [ 1.034912] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:03:59.281 2025] [ 1.034925] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.287 2025] [ 1.034930] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:03:59.294 2025] [ 1.034958] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:03:59.302 2025] [ 1.035916] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:03:59.310 2025] [ 1.035923] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:03:59.316 2025] [ 1.035936] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:03:59.323 2025] [ 1.035949] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:03:59.332 2025] [ 1.035960] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.339 2025] [ 1.035964] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:03:59.345 2025] [ 1.039076] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:03:59.352 2025] [ 1.045552] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:03:59.359 2025] [ 1.052205] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:03:59.369 2025] [ 1.052631] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:03:59.372 2025] [ 1.052637] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:03:59.379 2025] [ 1.052650] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:03:59.390 2025] [ 1.052668] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:03:59.400 2025] [ 1.052683] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.406 2025] [ 1.052688] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:03:59.413 2025] [ 1.086041] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:03:59.420 2025] [ 1.086332] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:03:59.428 2025] [ 1.087161] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:03:59.434 2025] [ 1.087169] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:03:59.440 2025] [ 1.087182] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:03:59.452 2025] [ 1.087206] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:03:59.464 2025] [ 1.087226] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.471 2025] [ 1.087231] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:03:59.477 2025] [ 1.087974] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:03:59.485 2025] [ 1.088036] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:03:59.498 2025] [ 1.088292] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:03:59.504 2025] [ 1.088310] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:03:59.512 2025] [ 1.088315] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:03:59.518 2025] [ 1.089080] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:03:59.527 2025] [ 1.105529] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:03:59.533 2025] [ 1.110434] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:59.539 2025] [ 1.110449] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:59.545 2025] [ 1.110444] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:03:59.554 2025] [ 1.110461] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:03:59.564 2025] [ 1.110485] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:03:59.573 2025] [ 1.110496] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.581 2025] [ 1.110500] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:59.586 2025] [ 1.111476] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:03:59.593 2025] [ 1.111492] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:59.599 2025] [ 1.111511] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:59.609 2025] [ 1.111535] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:59.618 2025] [ 1.111546] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.625 2025] [ 1.111551] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:03:59.631 2025] [ 1.111557] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:59.637 2025] [ 1.111561] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:59.645 2025] [ 1.111569] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:59.653 2025] [ 1.111582] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:03:59.663 2025] [ 1.111590] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.670 2025] [ 1.111594] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:59.679 2025] [ 1.112180] mmc1: CQHCI version 5.10 [Fri Jan 03 14:03:59.684 2025] [ 1.112723] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:03:59.689 2025] [ 1.112733] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:03:59.694 2025] [ 1.112749] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:03:59.700 2025] [ 1.112764] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:03:59.709 2025] [ 1.112776] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.716 2025] [ 1.112780] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:03:59.723 2025] [ 1.113004] mmc0: CQHCI version 5.10 [Fri Jan 03 14:03:59.728 2025] [ 1.114235] mmc2: CQHCI version 5.10 [Fri Jan 03 14:03:59.733 2025] [ 1.116597] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:03:59.739 2025] [ 1.119014] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:03:59.751 2025] [ 1.122020] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:03:59.753 2025] [ 1.122228] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:03:59.761 2025] [ 1.122286] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:03:59.770 2025] [ 1.125346] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:03:59.773 2025] [ 1.125554] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:03:59.779 2025] [ 1.125611] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:03:59.786 2025] [ 1.127358] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.792 2025] [ 1.127368] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:03:59.798 2025] [ 1.127390] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:03:59.807 2025] [ 1.127406] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:03:59.813 2025] [ 1.127418] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:03:59.820 2025] [ 1.127422] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:03:59.832 2025] [ 1.127430] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:03:59.850 2025] [ 1.127441] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:03:59.860 2025] [ 1.127450] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:03:59.867 2025] [ 1.127455] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:03:59.875 2025] [ 1.127873] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:03:59.881 2025] [ 1.127878] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:03:59.887 2025] [ 1.127891] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:03:59.896 2025] [ 1.127902] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:03:59.907 2025] [ 1.127907] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:03:59.910 2025] [ 1.128432] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:03:59.917 2025] [ 1.128450] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:03:59.924 2025] [ 1.128454] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:03:59.930 2025] [ 1.128547] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:03:59.937 2025] [ 1.128558] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:03:59.944 2025] [ 1.128562] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:03:59.950 2025] [ 1.128628] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:03:59.958 2025] [ 1.128639] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:03:59.964 2025] [ 1.128642] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:03:59.970 2025] [ 1.129293] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:03:59.977 2025] [ 1.131928] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:03:59.984 2025] [ 1.144250] ALSA device list: [Fri Jan 03 14:03:59.989 2025] [ 1.144262] No soundcards found. [Fri Jan 03 14:03:59.994 2025] [ 1.151537] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:00.000 2025] [ 1.156827] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:00.008 2025] [ 1.165691] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:00.015 2025] [ 1.174739] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:04:00.022 2025] [ 1.211787] mmc1: new MMC card at address 0001 [Fri Jan 03 14:04:00.027 2025] [ 1.212642] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:04:00.032 2025] [ 1.220599] mmcblk1: p1 [Fri Jan 03 14:04:00.037 2025] [ 1.221422] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:04:00.043 2025] [ 1.223104] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:04:00.047 2025] [ 1.224465] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:04:00.052 2025] [ 1.300824] mmc0: Command Queue Engine enabled [Fri Jan 03 14:04:00.059 2025] [ 1.300842] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:04:00.063 2025] [ 1.301570] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:04:00.068 2025] [ 1.305416] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:04:00.068 2025] [ 1.306510] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:04:00.073 2025] [ 1.307847] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:04:00.078 2025] [ 1.308945] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:04:00.085 2025] [ 1.332941] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:04:00.089 2025] [ 1.333312] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:00.096 2025] [ 1.333398] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:04:00.102 2025] [ 1.333551] devtmpfs: mounted [Fri Jan 03 14:04:00.108 2025] [ 1.334941] Freeing unused kernel memory: 1856K [Fri Jan 03 14:04:00.113 2025] [ 1.336124] Run /sbin/init as init process [Fri Jan 03 14:04:00.118 2025] [ 1.336128] with arguments: [Fri Jan 03 14:04:00.123 2025] [ 1.336129] /sbin/init [Fri Jan 03 14:04:00.123 2025] [ 1.336131] with environment: [Fri Jan 03 14:04:00.128 2025] [ 1.336133] HOME=/ [Fri Jan 03 14:04:00.128 2025] [ 1.336135] TERM=linux [Fri Jan 03 14:04:00.133 2025] [ 1.336136] syntec_extend= [Fri Jan 03 14:04:00.133 2025] [ 1.426561] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:04:00.140 2025] [ 1.466318] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:04:00.145 2025] [ 1.467556] Segment Routing with IPv6 [Fri Jan 03 14:04:00.149 2025] [ 1.467588] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:04:00.154 2025] [ 1.550689] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:04:00.182 2025] [ 1.551287] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:04:00.187 2025] [ 1.554557] systemd[1]: Hostname set to . [Fri Jan 03 14:04:00.192 2025] [ 1.675820] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:04:00.214 2025] [ 1.964215] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:04:00.232 2025] [ 1.966919] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:04:00.249 2025] [ 2.030383] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:04:00.257 2025] [ 2.033704] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:04:00.264 2025] [ 2.035234] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:04:00.270 2025] [ 2.035721] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:04:00.276 2025] [ 2.036099] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:04:00.282 2025] [ 2.036320] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:04:00.290 2025] [ 2.036718] systemd[1]: Reached target Path Units. [Fri Jan 03 14:04:00.297 2025] [ 2.036824] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:04:00.303 2025] [ 2.036893] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:04:00.310 2025] [ 2.036972] systemd[1]: Reached target Swaps. [Fri Jan 03 14:04:00.314 2025] [ 2.041184] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:04:00.317 2025] [ 2.041366] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:04:00.323 2025] [ 2.047413] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:04:00.329 2025] [ 2.047864] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:04:00.336 2025] [ 2.048689] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:04:00.342 2025] [ 2.049266] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:04:00.348 2025] [ 2.049839] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:04:00.354 2025] [ 2.050681] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:04:00.361 2025] [ 2.052519] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:04:00.365 2025] [ 2.053119] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:04:00.372 2025] [ 2.053643] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:04:00.378 2025] [ 2.093678] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:04:00.383 2025] [ 2.097848] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:04:00.390 2025] [ 2.102082] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:04:00.396 2025] [ 2.102948] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:04:00.406 2025] [ 2.104281] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:04:00.415 2025] [ 2.108130] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:04:00.427 2025] [ 2.113849] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:04:00.436 2025] [ 2.121561] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:04:00.446 2025] [ 2.127636] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:04:00.450 2025] [ 2.133685] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:04:00.456 2025] [ 2.139889] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:04:00.463 2025] [ 2.140466] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:04:00.471 2025] [ 2.141867] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:04:00.485 2025] [ 2.141894] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:04:00.497 2025] [ 2.147364] systemd[1]: Starting Journal Service... [Fri Jan 03 14:04:00.500 2025] [ 2.152562] fuse: init (API version 7.37) [Fri Jan 03 14:04:00.506 2025] [ 2.156257] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:04:00.511 2025] [ 2.161164] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:04:00.517 2025] [ 2.166401] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:04:00.523 2025] [ 2.171334] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:04:00.530 2025] [ 2.176191] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:04:00.536 2025] [ 2.193716] systemd[1]: Started RPC Bind. [Fri Jan 03 14:04:00.542 2025] [ 2.194751] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:04:00.547 2025] [ 2.195660] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:04:00.553 2025] [ 2.196534] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:04:00.558 2025] [ 2.198137] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:04:00.564 2025] [ 2.212235] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:04:00.570 2025] [ 2.215668] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:04:00.576 2025] [ 2.223987] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:04:00.582 2025] [ 2.224354] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:04:00.588 2025] [ 2.226735] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:04:00.594 2025] [ 2.229889] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:04:00.599 2025] [ 2.235981] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:04:00.606 2025] [ 2.240368] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:04:00.611 2025] [ 2.245260] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:04:00.617 2025] [ 2.246121] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:04:00.623 2025] [ 2.248833] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:04:00.628 2025] [ 2.250495] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:04:00.634 2025] [ 2.251757] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:04:00.642 2025] [ 2.254430] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:04:00.648 2025] [ 2.297807] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:04:00.652 2025] [ 2.301904] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:04:00.659 2025] [ 2.304779] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:04:00.667 2025] [ 2.305301] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:04:00.684 2025] [ 2.317658] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:04:00.689 2025] [ 2.318226] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:04:00.697 2025] [ 2.331753] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:04:00.704 2025] [ 2.340479] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:04:00.710 2025] [ 2.346504] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:04:00.716 2025] [ 2.379746] systemd[1]: Started Journal Service. [Fri Jan 03 14:04:00.722 2025] [ 2.426475] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:04:01.033 2025] [ 2.835088] random: crng init done [Fri Jan 03 14:04:01.086 2025] [ 2.888539] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:04:01.095 2025] [ 2.888556] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:04:01.112 2025] [ 2.888570] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:04:01.127 2025] [ 2.888603] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:04:01.137 2025] [ 2.888622] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:04:01.143 2025] [ 2.929177] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:04:01.170 2025] [ 2.929197] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:01.184 2025] [ 2.929233] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:01.224 2025] [ 2.929266] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:04:01.265 2025] [ 2.929279] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:04:01.292 2025] [ 2.929283] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:01.303 2025] [ 2.929294] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:01.346 2025] [ 2.929306] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:04:01.481 2025] [ 2.929314] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:04:01.493 2025] [ 2.929318] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:01.499 2025] [ 2.929329] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:01.514 2025] [ 2.929340] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:04:01.526 2025] [ 2.942250] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:04:01.537 2025] [ 2.942276] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:04:01.548 2025] [ 2.942311] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:04:01.554 2025] [ 2.942314] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:04:01.563 2025] [ 2.942351] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:01.569 2025] [ 2.949819] mc: Linux media interface: v0.10 [Fri Jan 03 14:04:01.590 2025] [ 2.950878] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:04:01.600 2025] [ 2.952163] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:34:19 UTC (1681065259) [Fri Jan 03 14:04:01.611 2025] [ 2.955383] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:04:01.645 2025] [ 2.955409] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:04:01.684 2025] [ 2.980695] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:04:01.722 2025] [ 2.980723] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:04:01.742 2025] [ 2.987465] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:04:01.751 2025] [ 3.130713] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:04:01.757 2025] [ 3.131092] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:04:01.767 2025] [ 3.132124] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:04:01.777 2025] [ 3.137244] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:04:01.784 2025] [ 3.138290] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:04:01.797 2025] [ 3.138334] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:04:01.801 2025] [ 3.138371] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:04:01.813 2025] [ 3.138379] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:04:01.832 2025] [ 3.236830] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:04:01.839 2025] [ 3.236857] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:04:01.843 2025] [ 3.236863] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:04:01.850 2025] [ 3.236885] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:04:01.873 2025] [ 3.236913] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:04:01.910 2025] [ 3.236933] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:01.916 2025] [ 3.236938] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:04:01.924 2025] [ 3.255990] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:04:01.944 2025] [ 3.256186] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:04:01.946 2025] [ 3.256369] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:04:01.969 2025] [ 3.257089] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:04:01.982 2025] [ 3.257215] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:04:01.992 2025] [ 3.286232] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:04:02.008 2025] [ 3.297197] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:04:02.026 2025] [ 3.297248] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:04:02.055 2025] [ 3.300825] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:04:02.061 2025] [ 3.300880] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:04:02.072 2025] [ 3.300889] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:04:02.079 2025] [ 3.301456] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:04:02.087 2025] [ 3.301631] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:04:02.094 2025] [ 3.343298] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:04:02.103 2025] [ 3.344189] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:04:02.116 2025] [ 3.344225] Get kick_gpio number= (418) [Fri Jan 03 14:04:02.343 2025] [ 4.144404] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:04:02.355 2025] [ 4.144423] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:04:02.394 2025] [ 4.144443] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:04:02.483 2025] [ 4.144473] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:04:02.529 2025] [ 4.144487] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:04:02.555 2025] [ 4.144494] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:04:02.570 2025] [ 4.144721] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:04:02.605 2025] [ 4.209837] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:04:02.633 2025] [ 4.211247] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:04:02.680 2025] [ 4.481423] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:04:02.709 2025] [ 4.482178] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:04:02.718 2025] [ 4.482236] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:04:02.736 2025] [ 4.482428] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:04:02.748 2025] [ 4.482445] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:04:02.761 2025] [ 4.489305] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:04:02.777 2025] [ 4.494756] xhci-hcd xhci-hcd.4.auto: irq 467, io mem 0x31100000 [Fri Jan 03 14:04:02.798 2025] [ 4.498186] hub 1-0:1.0: USB hub found [Fri Jan 03 14:04:02.804 2025] [ 4.498278] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:04:02.810 2025] [ 4.595554] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:04:02.827 2025] [ 4.597319] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:04:02.835 2025] [ 4.597358] cfg80211: failed to load regulatory.db [Fri Jan 03 14:04:02.939 2025] [ 4.742340] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:04:02.970 2025] [ 4.768915] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:04:02.984 2025] [ 4.768962] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:04:03.114 2025] [ 4.917463] hub 1-1:1.0: USB hub found [Fri Jan 03 14:04:03.123 2025] [ 4.922591] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:04:03.655 2025] [ 5.460897] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:04:03.655 2025] [ 5.460936] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:03.692 2025] [ 5.483384] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:04:03.702 2025] [ 5.497739] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:04:03.717 2025] [ 5.497783] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:03.733 2025] [ 5.498993] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:04:03.749 2025] [ 5.506685] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:03.780 2025] [ 5.592289] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:04:03.796 2025] [ 5.592830] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:03.827 2025] [ 5.641609] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:04:03.858 2025] [ 5.670484] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:04:03.874 2025] [ 5.670520] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:04:04.347 2025] [ 6.161879] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:04:04.362 2025] [ 6.163214] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:04.567 2025] *************************************************************** [Fri Jan 03 14:04:04.567 2025] *************************************************************** [Fri Jan 03 14:04:04.582 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:04:04.582 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:04:04.595 2025] bash [Fri Jan 03 14:04:04.595 2025] cifs-utils [Fri Jan 03 14:04:04.598 2025] dosfstools [Fri Jan 03 14:04:04.598 2025] grub-common [Fri Jan 03 14:04:04.598 2025] grub-editenv [Fri Jan 03 14:04:04.598 2025] grub-efi [Fri Jan 03 14:04:04.598 2025] less [Fri Jan 03 14:04:04.598 2025] lib32-libgcc1 [Fri Jan 03 14:04:04.598 2025] lib32-libstdc++6 [Fri Jan 03 14:04:04.598 2025] libdw1 [Fri Jan 03 14:04:04.598 2025] libelf1 [Fri Jan 03 14:04:04.598 2025] libgcc1 [Fri Jan 03 14:04:04.598 2025] libgdbm-compat4 [Fri Jan 03 14:04:04.598 2025] libgdbm6 [Fri Jan 03 14:04:04.598 2025] libgmp10 [Fri Jan 03 14:04:04.614 2025] libidn2-0 [Fri Jan 03 14:04:04.614 2025] libreadline8 [Fri Jan 03 14:04:04.614 2025] libstdc++6 [Fri Jan 03 14:04:04.614 2025] libunistring2 [Fri Jan 03 14:04:04.614 2025] libvte-2.91-0 [Fri Jan 03 14:04:04.614 2025] nettle [Fri Jan 03 14:04:04.614 2025] onboard [Fri Jan 03 14:04:04.614 2025] parted [Fri Jan 03 14:04:04.614 2025] rxvt-unicode [Fri Jan 03 14:04:04.614 2025] [Fri Jan 03 14:04:04.614 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:04:04.630 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:04:04.630 2025] the opkg remove command. i.e.: [Fri Jan 03 14:04:04.630 2025] opkg remove [Fri Jan 03 14:04:04.630 2025] Where is the name printed in the list above [Fri Jan 03 14:04:04.645 2025] [Fri Jan 03 14:04:04.645 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:04:04.645 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:04:04.645 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:04:04.645 2025] also remove the dependent packages as well [Fri Jan 03 14:04:04.661 2025] *************************************************************** [Fri Jan 03 14:04:04.661 2025] *************************************************************** [Fri Jan 03 14:04:09.736 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:04:09.742 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:04:09.926 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:04:09.933 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:04:09.997 2025] [Fri Jan 03 14:04:09.997 2025] _____ _____ _ _ [Fri Jan 03 14:04:10.002 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:04:10.008 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:04:10.015 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:04:10.020 2025] |___| |___| [Fri Jan 03 14:04:10.026 2025] [Fri Jan 03 14:04:10.026 2025] Arago Project am62xx-evm - [Fri Jan 03 14:04:10.026 2025] [Fri Jan 03 14:04:10.026 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:04:10.031 2025] [Fri Jan 03 14:04:10.031 2025] am62xx-evm login: [ 11.914409] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:04:10.118 2025] [ 11.914433] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:04:10.125 2025] [ 11.914455] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.131 2025] [ 11.914509] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:04:10.137 2025] [ 11.914514] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:04:10.143 2025] [ 11.914523] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.149 2025] [ 11.914564] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:04:10.157 2025] [ 11.914569] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:04:10.163 2025] [ 11.914575] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.169 2025] [ 11.914609] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:04:10.176 2025] [ 11.914614] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:04:10.182 2025] [ 11.914626] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.188 2025] [ 11.914659] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:04:10.195 2025] [ 11.914665] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:04:10.200 2025] [ 11.914672] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.207 2025] [ 11.914710] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:04:10.213 2025] [ 11.914715] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:04:10.219 2025] [ 11.914722] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.225 2025] [ 11.914756] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:10.231 2025] [ 11.914761] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:04:10.238 2025] [ 11.914771] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:10.244 2025] [ 11.914807] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:04:10.250 2025] [ 11.914812] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:04:10.257 2025] [ 11.914819] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.403 2025] [ 14.214890] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:04:12.403 2025] [ 14.214911] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:04:12.419 2025] [ 14.214935] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.419 2025] [ 14.214979] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:04:12.435 2025] [ 14.214984] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:04:12.435 2025] [ 14.214996] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.435 2025] [ 14.215122] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:04:12.450 2025] [ 14.215128] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:04:12.450 2025] [ 14.215141] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.466 2025] [ 14.215182] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:04:12.466 2025] [ 14.215187] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:04:12.466 2025] [ 14.215194] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.482 2025] [ 14.215229] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:04:12.482 2025] [ 14.215235] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:04:12.497 2025] [ 14.215241] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.497 2025] [ 14.215276] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:04:12.497 2025] [ 14.215283] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:04:12.513 2025] [ 14.215290] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.519 2025] [ 14.215323] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:12.529 2025] [ 14.215328] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:04:12.529 2025] [ 14.215335] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.529 2025] [ 14.215374] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:04:12.545 2025] [ 14.215379] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:04:12.545 2025] [ 14.215387] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:12.890 2025] [ 14.702988] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:04:16.190 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:04:16.200 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:04:17.973 2025] [ 19.776503] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:04:17.981 2025] [ 19.776531] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:04:17.989 2025] [ 19.776552] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:17.996 2025] [ 19.776620] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:04:18.005 2025] [ 19.776625] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:04:18.012 2025] [ 19.776633] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.023 2025] [ 19.776674] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:04:18.030 2025] [ 19.776679] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:04:18.030 2025] [ 19.776686] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.039 2025] [ 19.776720] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:04:18.045 2025] [ 19.776726] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:04:18.050 2025] [ 19.776733] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.057 2025] [ 19.776768] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:04:18.061 2025] [ 19.776773] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:04:18.070 2025] [ 19.776781] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.075 2025] [ 19.776817] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:04:18.081 2025] [ 19.776822] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:04:18.087 2025] [ 19.776829] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.093 2025] [ 19.776863] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:18.099 2025] [ 19.776868] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:04:18.106 2025] [ 19.776875] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.112 2025] [ 19.776909] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:04:18.119 2025] [ 19.776914] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:04:18.132 2025] [ 19.776921] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.137 2025] [ 19.861665] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:04:18.138 2025] [ 19.861720] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:04:18.143 2025] [ 19.861742] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.150 2025] [ 19.861882] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:04:18.157 2025] [ 19.861911] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:04:18.161 2025] [ 19.861923] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.167 2025] [ 19.861989] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:04:18.178 2025] [ 19.861995] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:04:18.180 2025] [ 19.862003] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.187 2025] [ 19.862452] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:04:18.193 2025] [ 19.862482] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:04:18.199 2025] [ 19.862502] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.203 2025] [ 19.862609] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:04:18.212 2025] [ 19.862614] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:04:18.218 2025] [ 19.862622] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.223 2025] [ 19.862680] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:04:18.228 2025] [ 19.862686] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:04:18.237 2025] [ 19.862694] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.240 2025] [ 19.862753] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:18.246 2025] [ 19.862760] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:04:18.256 2025] [ 19.862768] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:18.263 2025] [ 19.862826] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:04:18.270 2025] [ 19.862832] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:04:18.275 2025] [ 19.862838] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:04:49.809 2025] [Fri Jan 03 14:04:49.809 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:04:49.828 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:04:49.878 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:04:49.899 2025] Trying to boot from MMC1 [Fri Jan 03 14:04:50.071 2025] Authentication passed [Fri Jan 03 14:04:50.078 2025] Authentication passed [Fri Jan 03 14:04:50.084 2025] Authentication passed [Fri Jan 03 14:04:50.120 2025] Authentication passed [Fri Jan 03 14:04:50.128 2025] Authentication passed [Fri Jan 03 14:04:50.130 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:04:50.135 2025] [Fri Jan 03 14:04:50.135 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:04:50.142 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:04:50.439 2025] [Fri Jan 03 14:04:50.439 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:04:50.446 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:04:50.490 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:04:50.492 2025] Error: could not access storage. [Fri Jan 03 14:04:50.496 2025] Trying to boot from MMC1 [Fri Jan 03 14:04:50.652 2025] Authentication passed [Fri Jan 03 14:04:50.658 2025] Authentication passed [Fri Jan 03 14:04:51.310 2025] [Fri Jan 03 14:04:51.310 2025] [Fri Jan 03 14:04:51.310 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:04:51.317 2025] [Fri Jan 03 14:04:51.317 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:04:51.317 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:04:51.322 2025] DRAM: 2 GiB [Fri Jan 03 14:04:51.562 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:04:51.566 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:04:51.577 2025] Loading Environment from MMC... OK [Fri Jan 03 14:04:51.784 2025] In: serial [Fri Jan 03 14:04:51.784 2025] Out: serial [Fri Jan 03 14:04:51.788 2025] Err: serial [Fri Jan 03 14:04:51.788 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:04:51.794 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:04:51.948 2025] switch to partitions #0, OK [Fri Jan 03 14:04:51.950 2025] mmc0(part 0) is current device [Fri Jan 03 14:04:52.096 2025] SD/MMC found on device 0 [Fri Jan 03 14:04:52.099 2025] Running eMMC boot ... [Fri Jan 03 14:04:52.117 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:04:52.120 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:04:52.125 2025] Importing environment from mmc0 ... [Fri Jan 03 14:04:52.347 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:04:52.369 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:04:52.375 2025] Working FDT set to 88000000 [Fri Jan 03 14:04:52.379 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:04:52.384 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:04:52.389 2025] Working FDT set to 88000000 [Fri Jan 03 14:04:52.409 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:04:52.416 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:04:52.424 2025] Working FDT set to 8feed000 [Fri Jan 03 14:04:52.434 2025] [Fri Jan 03 14:04:52.434 2025] Starting kernel ... [Fri Jan 03 14:04:52.440 2025] [Fri Jan 03 14:04:52.471 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:04:52.481 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:04:52.498 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:04:52.503 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:04:52.594 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:04:52.598 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:04:52.604 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:04:52.610 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:04:52.621 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:04:52.629 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:04:52.635 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:04:52.643 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:04:52.652 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:04:52.664 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:04:52.673 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:04:52.677 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:04:52.687 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:04:52.695 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:04:52.704 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:04:52.709 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:04:52.715 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:04:52.720 2025] [ 0.000000] Normal empty [Fri Jan 03 14:04:52.724 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:04:52.730 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:04:52.730 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:04:52.736 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:04:52.742 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:04:52.748 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:04:52.753 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:04:52.759 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:04:52.765 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:04:52.773 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:04:52.780 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:04:52.786 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:04:52.792 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:04:52.798 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:04:52.803 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:04:52.808 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:04:52.814 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:04:52.819 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:04:52.826 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:04:52.826 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:04:52.832 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:04:52.840 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:04:52.846 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:04:52.852 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:04:52.858 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:04:52.905 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:04:52.914 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:04:52.922 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:04:52.930 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:04:52.937 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:04:52.955 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:04:52.964 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:04:52.966 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:04:52.973 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:04:52.978 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:04:52.984 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:04:52.991 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:04:52.997 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:04:53.003 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:04:53.009 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:04:53.015 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:04:53.020 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:04:53.025 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:04:53.030 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:04:53.035 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:04:53.040 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:04:53.046 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:04:53.052 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:04:53.059 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:04:53.065 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:04:53.072 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:04:53.078 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:04:53.085 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:04:53.093 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:04:53.098 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:04:53.109 2025] [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:04:53.117 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 14:04:53.129 2025] [ 0.528882] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:04:53.134 2025] [ 0.528892] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:04:53.140 2025] [ 0.528975] LSM: Security Framework initializing [Fri Jan 03 14:04:53.146 2025] [ 0.529112] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:04:53.152 2025] [ 0.529136] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:04:53.160 2025] [ 0.530833] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:04:53.165 2025] [ 0.530841] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:04:53.171 2025] [ 0.530886] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:04:53.180 2025] [ 0.583343] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:04:53.183 2025] [ 0.583579] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:04:53.192 2025] [ 0.583666] EFI services will not be available. [Fri Jan 03 14:04:53.197 2025] [ 0.583930] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:04:53.203 2025] [ 0.584708] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:04:53.209 2025] [ 0.584818] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:04:53.215 2025] [ 0.584835] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:04:53.220 2025] [ 0.584890] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:04:53.231 2025] [ 0.634981] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:04:53.233 2025] [ 0.635070] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:04:53.239 2025] [ 0.635082] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:04:53.246 2025] [ 0.635113] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:04:53.257 2025] [ 0.660994] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:04:53.258 2025] [ 0.661075] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:04:53.265 2025] [ 0.661086] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:04:53.273 2025] [ 0.661119] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:04:53.280 2025] [ 0.661179] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:04:53.286 2025] [ 0.661184] SMP: Total of 4 processors activated. [Fri Jan 03 14:04:53.291 2025] [ 0.661188] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:04:53.297 2025] [ 0.700617] CPU features: detected: CRC32 instructions [Fri Jan 03 14:04:53.303 2025] [ 0.700663] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:04:53.307 2025] [ 0.700665] alternatives: applying system-wide alternatives [Fri Jan 03 14:04:53.313 2025] [ 0.702162] devtmpfs: initialized [Fri Jan 03 14:04:53.313 2025] [ 0.713757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:04:53.322 2025] [ 0.713785] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:04:53.329 2025] [ 0.718931] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:04:53.335 2025] [ 0.719746] DMI not present or invalid. [Fri Jan 03 14:04:53.341 2025] [ 0.720275] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:04:53.346 2025] [ 0.741306] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:04:53.352 2025] [ 0.741598] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:04:53.359 2025] [ 0.741791] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:04:53.368 2025] [ 0.741878] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:04:53.375 2025] [ 0.742034] audit: type=2000 audit(0.739:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:04:53.381 2025] [ 0.742667] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:04:53.387 2025] [ 0.742671] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:04:53.394 2025] [ 0.742920] ASID allocator initialised with 65536 entries [Fri Jan 03 14:04:53.400 2025] [ 0.757841] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:04:53.407 2025] [ 0.766904] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:04:53.414 2025] [ 0.766916] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:04:53.421 2025] [ 0.766920] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:04:53.427 2025] [ 0.766923] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:04:53.433 2025] [ 0.766926] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:04:53.440 2025] [ 0.766929] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:04:53.447 2025] [ 0.766933] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:04:53.454 2025] [ 0.766936] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:04:53.460 2025] [ 0.768126] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:04:53.469 2025] [ 0.768670] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:04:53.477 2025] [ 0.768677] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:04:53.483 2025] [ 0.768690] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:04:53.491 2025] [ 0.768705] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:04:53.500 2025] [ 0.768716] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.507 2025] [ 0.768722] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:04:53.514 2025] [ 0.768974] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:04:53.521 2025] [ 0.768979] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:04:53.528 2025] [ 0.768988] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:04:53.537 2025] [ 0.769001] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:04:53.545 2025] [ 0.769010] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.553 2025] [ 0.769014] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:04:53.560 2025] [ 0.769234] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:04:53.567 2025] [ 0.769239] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:04:53.574 2025] [ 0.769248] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:04:53.583 2025] [ 0.769260] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:04:53.596 2025] [ 0.769269] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.599 2025] [ 0.769273] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:04:53.607 2025] [ 0.769520] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:04:53.613 2025] [ 0.769524] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:04:53.624 2025] [ 0.769537] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:04:53.629 2025] [ [ 1.036847] printk: console [ttyS2] printing thread started [Fri Jan 03 14:04:53.635 2025] 0.769550] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:04:53.646 2025] [ 1.036869] printk: console [ttyS2] enabled [Fri Jan 03 14:04:53.648 2025] [ 1.036873] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:04:53.655 2025] [ 1.050954] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:04:53.660 2025] [ 1.052203] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:04:53.666 2025] [ 1.052213] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:04:53.673 2025] [ 1.052225] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:04:53.683 2025] [ 1.052243] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:04:53.693 2025] [ 1.052254] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.700 2025] [ 1.052259] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:04:53.707 2025] [ 1.052288] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:04:53.715 2025] [ 1.053196] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:04:53.722 2025] [ 1.053204] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:04:53.731 2025] [ 1.053216] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:04:53.736 2025] [ 1.053230] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:04:53.745 2025] [ 1.053240] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.752 2025] [ 1.053245] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:04:53.763 2025] [ 1.056318] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:04:53.767 2025] [ 1.062616] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:04:53.774 2025] [ 1.069234] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:04:53.780 2025] [ 1.069657] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:04:53.786 2025] [ 1.069664] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:04:53.792 2025] [ 1.069677] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:04:53.803 2025] [ 1.069698] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:04:53.817 2025] [ 1.069712] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.821 2025] [ 1.069717] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:04:53.827 2025] [ 1.103100] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:04:53.837 2025] [ 1.103387] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:04:53.839 2025] [ 1.104149] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:04:53.847 2025] [ 1.104157] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:04:53.854 2025] [ 1.104169] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:04:53.865 2025] [ 1.104192] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:04:53.878 2025] [ 1.104207] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.885 2025] [ 1.104211] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:04:53.892 2025] [ 1.104985] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:04:53.899 2025] [ 1.105036] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:04:53.911 2025] [ 1.105309] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:04:53.922 2025] [ 1.105321] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:04:53.925 2025] [ 1.105327] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:04:53.931 2025] [ 1.106118] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:04:53.942 2025] [ 1.122629] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:04:53.946 2025] [ 1.127652] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:04:53.955 2025] [ 1.127766] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:04:53.961 2025] [ 1.127772] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:04:53.968 2025] [ 1.127837] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:04:53.977 2025] [ 1.127861] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:04:53.987 2025] [ 1.127872] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:53.994 2025] [ 1.127879] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:04:53.999 2025] [ 1.127902] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:04:54.006 2025] [ 1.127906] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:04:54.012 2025] [ 1.127915] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:04:54.022 2025] [ 1.127928] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:04:54.031 2025] [ 1.128078] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:54.039 2025] [ 1.128099] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:04:54.044 2025] [ 1.128222] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:04:54.050 2025] [ 1.128367] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:04:54.057 2025] [ 1.128372] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:04:54.062 2025] [ 1.128388] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:04:54.072 2025] [ 1.128405] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:04:54.081 2025] [ 1.128415] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:54.089 2025] [ 1.128419] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:04:54.098 2025] [ 1.128506] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:04:54.105 2025] [ 1.128517] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:04:54.111 2025] [ 1.128531] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:04:54.121 2025] [ 1.128557] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:54.128 2025] [ 1.128560] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:04:54.133 2025] [ 1.128801] mmc2: CQHCI version 5.10 [Fri Jan 03 14:04:54.140 2025] [ 1.128832] mmc1: CQHCI version 5.10 [Fri Jan 03 14:04:54.140 2025] [ 1.129697] mmc0: CQHCI version 5.10 [Fri Jan 03 14:04:54.146 2025] [ 1.132680] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:04:54.154 2025] [ 1.135055] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:04:54.166 2025] [ 1.137964] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:04:54.173 2025] [ 1.138201] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:04:54.180 2025] [ 1.138265] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:04:54.187 2025] [ 1.141323] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:04:54.194 2025] [ 1.141533] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:04:54.206 2025] [ 1.141599] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:04:54.208 2025] [ 1.143252] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:04:54.215 2025] [ 1.143260] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:04:54.222 2025] [ 1.143281] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:04:54.231 2025] [ 1.143303] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:04:54.237 2025] [ 1.143316] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:04:54.244 2025] [ 1.143320] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:04:54.251 2025] [ 1.143329] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:04:54.259 2025] [ 1.143340] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:04:54.268 2025] [ 1.143349] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:04:54.275 2025] [ 1.143354] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:04:54.282 2025] [ 1.143813] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:04:54.288 2025] [ 1.143818] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:04:54.295 2025] [ 1.143831] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:04:54.304 2025] [ 1.143843] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:04:54.311 2025] [ 1.143847] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:04:54.317 2025] [ 1.144411] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:04:54.325 2025] [ 1.144428] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:04:54.331 2025] [ 1.144431] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:04:54.337 2025] [ 1.144542] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:04:54.345 2025] [ 1.144553] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:04:54.351 2025] [ 1.144557] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:04:54.357 2025] [ 1.144619] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:04:54.365 2025] [ 1.144630] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:04:54.372 2025] [ 1.144633] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:04:54.377 2025] [ 1.145445] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:04:54.383 2025] [ 1.148064] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:04:54.392 2025] [ 1.160620] ALSA device list: [Fri Jan 03 14:04:54.397 2025] [ 1.160633] No soundcards found. [Fri Jan 03 14:04:54.402 2025] [ 1.166440] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:54.408 2025] [ 1.168658] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:54.414 2025] [ 1.178486] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:04:54.420 2025] [ 1.178652] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:04:54.427 2025] [ 1.224561] mmc1: new MMC card at address 0001 [Fri Jan 03 14:04:54.432 2025] [ 1.225392] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:04:54.439 2025] [ 1.233527] mmcblk1: p1 [Fri Jan 03 14:04:54.443 2025] [ 1.234406] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:04:54.448 2025] [ 1.236011] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:04:54.453 2025] [ 1.237387] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:04:54.459 2025] [ 1.318920] mmc0: Command Queue Engine enabled [Fri Jan 03 14:04:54.463 2025] [ 1.318939] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:04:54.468 2025] [ 1.319664] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:04:54.473 2025] [ 1.323553] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:04:54.478 2025] [ 1.324647] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:04:54.483 2025] [ 1.325997] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:04:54.487 2025] [ 1.327173] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:04:54.493 2025] [ 1.350446] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:04:54.497 2025] [ 1.350828] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:54.502 2025] [ 1.350911] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:04:54.508 2025] [ 1.351060] devtmpfs: mounted [Fri Jan 03 14:04:54.514 2025] [ 1.352434] Freeing unused kernel memory: 1856K [Fri Jan 03 14:04:54.519 2025] [ 1.354186] Run /sbin/init as init process [Fri Jan 03 14:04:54.524 2025] [ 1.354190] with arguments: [Fri Jan 03 14:04:54.529 2025] [ 1.354192] /sbin/init [Fri Jan 03 14:04:54.529 2025] [ 1.354194] with environment: [Fri Jan 03 14:04:54.534 2025] [ 1.354195] HOME=/ [Fri Jan 03 14:04:54.534 2025] [ 1.354197] TERM=linux [Fri Jan 03 14:04:54.539 2025] [ 1.354199] syntec_extend= [Fri Jan 03 14:04:54.544 2025] [ 1.446020] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:04:54.549 2025] [ 1.477497] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:04:54.554 2025] [ 1.478702] Segment Routing with IPv6 [Fri Jan 03 14:04:54.558 2025] [ 1.478737] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:04:54.563 2025] [ 1.495965] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:04:54.589 2025] [ 1.496630] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:04:54.594 2025] [ 1.499813] systemd[1]: Hostname set to . [Fri Jan 03 14:04:54.600 2025] [ 1.621566] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:04:54.622 2025] [ 1.925450] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:04:54.641 2025] [ 1.928211] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:04:54.658 2025] [ 1.990611] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:04:54.665 2025] [ 1.993925] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:04:54.670 2025] [ 1.995524] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:04:54.676 2025] [ 1.996006] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:04:54.682 2025] [ 1.996378] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:04:54.690 2025] [ 1.996577] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:04:54.701 2025] [ 1.996944] systemd[1]: Reached target Path Units. [Fri Jan 03 14:04:54.703 2025] [ 1.997042] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:04:54.709 2025] [ 1.997145] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:04:54.715 2025] [ 1.997242] systemd[1]: Reached target Swaps. [Fri Jan 03 14:04:54.721 2025] [ 2.001470] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:04:54.727 2025] [ 2.001640] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:04:54.733 2025] [ 2.007816] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:04:54.739 2025] [ 2.008312] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:04:54.745 2025] [ 2.009139] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:04:54.751 2025] [ 2.009683] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:04:54.765 2025] [ 2.010299] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:04:54.775 2025] [ 2.011126] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:04:54.785 2025] [ 2.012984] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:04:54.792 2025] [ 2.013508] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:04:54.798 2025] [ 2.013985] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:04:54.804 2025] [ 2.045957] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:04:54.810 2025] [ 2.050045] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:04:54.815 2025] [ 2.054616] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:04:54.824 2025] [ 2.055447] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:04:54.833 2025] [ 2.057346] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:04:54.842 2025] [ 2.062043] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:04:54.848 2025] [ 2.069290] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:04:54.855 2025] [ 2.074372] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:04:54.861 2025] [ 2.079678] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:04:54.867 2025] [ 2.084639] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:04:54.874 2025] [ 2.091077] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:04:54.880 2025] [ 2.091747] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:04:54.889 2025] [ 2.093154] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:04:54.901 2025] [ 2.093184] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:04:54.909 2025] [ 2.096955] systemd[1]: Starting Journal Service... [Fri Jan 03 14:04:54.914 2025] [ 2.097714] fuse: init (API version 7.37) [Fri Jan 03 14:04:54.920 2025] [ 2.104996] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:04:54.926 2025] [ 2.110228] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:04:54.932 2025] [ 2.115425] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:04:54.939 2025] [ 2.120660] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:04:54.945 2025] [ 2.125808] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:04:54.950 2025] [ 2.151355] systemd[1]: Started RPC Bind. [Fri Jan 03 14:04:54.957 2025] [ 2.155362] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:04:54.962 2025] [ 2.156191] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:04:54.968 2025] [ 2.156827] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:04:54.974 2025] [ 2.157686] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:04:54.980 2025] [ 2.161581] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:04:54.985 2025] [ 2.163361] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:04:54.992 2025] [ 2.164749] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:04:54.997 2025] [ 2.165408] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:04:55.003 2025] [ 2.168740] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:04:55.009 2025] [ 2.169386] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:04:55.014 2025] [ 2.174406] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:04:55.020 2025] [ 2.176749] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:04:55.027 2025] [ 2.177672] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:04:55.032 2025] [ 2.180911] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:04:55.038 2025] [ 2.182843] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:04:55.047 2025] [ 2.189345] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:04:55.049 2025] [ 2.193926] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:04:55.055 2025] [ 2.195769] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:04:55.061 2025] [ 2.211934] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:04:55.068 2025] [ 2.216114] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:04:55.076 2025] [ 2.218850] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:04:55.091 2025] [ 2.219355] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:04:55.110 2025] [ 2.225051] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:04:55.119 2025] [ 2.225690] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:04:55.127 2025] [ 2.242335] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:04:55.132 2025] [ 2.247258] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:04:55.138 2025] [ 2.247955] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:04:55.161 2025] [ 2.282585] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:04:55.171 2025] [ 2.304049] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 14:04:55.175 2025] [ 2.304786] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 14:04:55.182 2025] [ 2.327505] systemd[1]: Mounting /media/ram... [Fri Jan 03 14:04:55.192 2025] [ 2.333012] systemd[1]: Mounting /var/volatile... [Fri Jan 03 14:04:55.195 2025] [ 2.337898] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 14:04:55.205 2025] [ 2.339596] systemd[1]: Started Journal Service. [Fri Jan 03 14:04:55.207 2025] [ 2.405568] systemd-journald[190]: Received client request to flush runtime journal. [Fri Jan 03 14:04:55.299 2025] [ 2.705141] random: crng init done [Fri Jan 03 14:04:55.447 2025] [ 2.852170] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:04:55.456 2025] [ 2.852187] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:04:55.469 2025] [ 2.852203] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:04:55.484 2025] [ 2.852239] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:04:55.499 2025] [ 2.852262] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:04:55.508 2025] [ 2.853826] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:04:55.516 2025] [ 2.853841] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:55.526 2025] [ 2.853869] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:55.534 2025] [ 2.853891] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:04:55.551 2025] [ 2.853902] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:04:55.561 2025] [ 2.853906] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:55.563 2025] [ 2.853916] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:55.601 2025] [ 2.853931] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:04:55.633 2025] [ 2.853938] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:04:55.639 2025] [ 2.853942] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:04:55.649 2025] [ 2.853952] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:04:55.657 2025] [ 2.853963] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:04:55.688 2025] [ 2.872195] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:04:55.706 2025] [ 2.872214] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:04:55.720 2025] [ 2.872246] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:04:55.730 2025] [ 2.872249] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:04:55.746 2025] [ 2.872284] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:04:55.757 2025] [ 2.902358] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:04:55.763 2025] [ 2.903455] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:35:13 UTC (1681065313) [Fri Jan 03 14:04:55.775 2025] [ 2.909636] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:04:55.797 2025] [ 2.909659] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:04:55.825 2025] [ 2.946988] mc: Linux media interface: v0.10 [Fri Jan 03 14:04:55.830 2025] [ 2.987442] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:04:55.834 2025] [ 3.047596] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:04:55.848 2025] [ 3.049537] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:04:55.886 2025] [ 3.050239] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:04:55.895 2025] [ 3.052650] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:04:55.905 2025] [ 3.056362] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:04:55.916 2025] [ 3.056399] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:04:55.919 2025] [ 3.056437] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:04:55.934 2025] [ 3.056445] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:04:55.942 2025] [ 3.221119] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:04:55.944 2025] [ 3.221153] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:04:55.950 2025] [ 3.221159] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:04:55.956 2025] [ 3.221187] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:04:55.967 2025] [ 3.221224] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:04:55.977 2025] [ 3.221255] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:04:55.985 2025] [ 3.221261] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:04:55.997 2025] [ 3.229591] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:04:56.006 2025] [ 3.260117] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:04:56.023 2025] [ 3.263389] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:04:56.027 2025] [ 3.263595] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:04:56.040 2025] [ 3.264123] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:04:56.059 2025] [ 3.264202] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:04:56.071 2025] [ 3.282544] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:04:56.078 2025] [ 3.282590] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:04:56.086 2025] [ 3.285580] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:04:56.104 2025] [ 3.285628] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:04:56.121 2025] [ 3.285640] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:04:56.145 2025] [ 3.285918] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:04:56.175 2025] [ 3.286054] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:04:56.183 2025] [ 3.370163] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:04:56.192 2025] [ 3.372904] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:04:56.200 2025] [ 3.372936] Get kick_gpio number= (418) [Fri Jan 03 14:04:56.797 2025] [ 4.198920] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:04:56.808 2025] [ 4.198945] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:04:56.855 2025] [ 4.198961] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:04:56.891 2025] [ 4.198992] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:04:56.935 2025] [ 4.199008] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:04:56.945 2025] [ 4.199013] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:04:56.950 2025] [ 4.199290] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:04:57.047 2025] [ 4.452482] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:04:57.052 2025] [ 4.459051] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:04:57.230 2025] [ 4.635431] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:04:57.256 2025] [ 4.657951] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:04:57.263 2025] [ 4.658015] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:04:57.269 2025] [ 4.674469] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:04:57.279 2025] [ 4.674494] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:04:57.286 2025] [ 4.690770] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:04:57.296 2025] [ 4.697864] hub 1-0:1.0: USB hub found [Fri Jan 03 14:04:57.299 2025] [ 4.697965] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:04:57.534 2025] [ 4.940171] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:04:57.596 2025] [ 5.002183] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:04:57.634 2025] [ 5.040748] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:04:57.645 2025] [ 5.044744] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:04:57.652 2025] [ 5.044791] cfg80211: failed to load regulatory.db [Fri Jan 03 14:04:57.734 2025] [ 5.139739] hub 1-1:1.0: USB hub found [Fri Jan 03 14:04:57.738 2025] [ 5.140015] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:04:57.796 2025] [ 5.202514] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:04:57.809 2025] [ 5.202558] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:04:57.843 2025] [ 5.249835] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:04:57.852 2025] [ 5.249878] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:57.866 2025] [ 5.257617] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:04:57.877 2025] [ 5.257660] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:58.053 2025] [ 5.460133] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:04:58.069 2025] [ 5.460178] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:58.081 2025] [ 5.485042] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:04:58.148 2025] [ 5.555667] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:04:58.153 2025] [ 5.556653] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:58.439 2025] [ 5.846333] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:04:58.474 2025] [ 5.880164] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:04:58.483 2025] [ 5.880201] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:04:58.572 2025] [ 5.979249] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:04:58.581 2025] [ 5.980455] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:04:58.781 2025] *************************************************************** [Fri Jan 03 14:04:58.786 2025] *************************************************************** [Fri Jan 03 14:04:58.792 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:04:58.798 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:04:58.805 2025] bash [Fri Jan 03 14:04:58.805 2025] cifs-utils [Fri Jan 03 14:04:58.805 2025] dosfstools [Fri Jan 03 14:04:58.805 2025] grub-common [Fri Jan 03 14:04:58.805 2025] grub-editenv [Fri Jan 03 14:04:58.809 2025] grub-efi [Fri Jan 03 14:04:58.810 2025] less [Fri Jan 03 14:04:58.814 2025] lib32-libgcc1 [Fri Jan 03 14:04:58.814 2025] lib32-libstdc++6 [Fri Jan 03 14:04:58.814 2025] libdw1 [Fri Jan 03 14:04:58.814 2025] libelf1 [Fri Jan 03 14:04:58.819 2025] libgcc1 [Fri Jan 03 14:04:58.819 2025] libgdbm-compat4 [Fri Jan 03 14:04:58.819 2025] libgdbm6 [Fri Jan 03 14:04:58.820 2025] libgmp10 [Fri Jan 03 14:04:58.820 2025] libidn2-0 [Fri Jan 03 14:04:58.824 2025] libreadline8 [Fri Jan 03 14:04:58.825 2025] libstdc++6 [Fri Jan 03 14:04:58.825 2025] libunistring2 [Fri Jan 03 14:04:58.825 2025] libvte-2.91-0 [Fri Jan 03 14:04:58.830 2025] nettle [Fri Jan 03 14:04:58.830 2025] onboard [Fri Jan 03 14:04:58.830 2025] parted [Fri Jan 03 14:04:58.830 2025] rxvt-unicode [Fri Jan 03 14:04:58.830 2025] [Fri Jan 03 14:04:58.830 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:04:58.837 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:04:58.842 2025] the opkg remove command. i.e.: [Fri Jan 03 14:04:58.847 2025] opkg remove [Fri Jan 03 14:04:58.847 2025] Where is the name printed in the list above [Fri Jan 03 14:04:58.852 2025] [Fri Jan 03 14:04:58.852 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:04:58.858 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:04:58.863 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:04:58.869 2025] also remove the dependent packages as well [Fri Jan 03 14:04:58.869 2025] *************************************************************** [Fri Jan 03 14:04:58.879 2025] *************************************************************** [Fri Jan 03 14:05:04.132 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:05:04.138 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:05:04.322 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:05:04.329 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:05:04.474 2025] [Fri Jan 03 14:05:04.474 2025] _____ _____ _ _ [Fri Jan 03 14:05:04.479 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:05:04.485 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:05:04.491 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:05:04.496 2025] |___| |___| [Fri Jan 03 14:05:04.502 2025] [Fri Jan 03 14:05:04.502 2025] Arago Project am62xx-evm - [Fri Jan 03 14:05:04.502 2025] [Fri Jan 03 14:05:04.502 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:05:04.508 2025] [Fri Jan 03 14:05:04.508 2025] am62xx-evm login: [ 11.916969] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:05:04.515 2025] [ 11.916993] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:05:04.522 2025] [ 11.917014] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.529 2025] [ 11.917074] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:05:04.537 2025] [ 11.917169] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:05:04.542 2025] [ 11.917186] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.548 2025] [ 11.917243] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:05:04.554 2025] [ 11.917248] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:05:04.559 2025] [ 11.917256] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.566 2025] [ 11.917292] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:05:04.571 2025] [ 11.917297] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:05:04.579 2025] [ 11.917305] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.585 2025] [ 11.917343] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:05:04.591 2025] [ 11.917348] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:05:04.597 2025] [ 11.917355] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.604 2025] [ 11.917395] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:05:04.610 2025] [ 11.917400] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:05:04.615 2025] [ 11.917407] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.621 2025] [ 11.917441] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:05:04.627 2025] [ 11.917446] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:05:04.632 2025] [ 11.917457] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:04.638 2025] [ 11.917491] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:05:04.645 2025] [ 11.917496] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:05:04.652 2025] [ 11.917503] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.827 2025] [ 14.234820] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:05:06.837 2025] [ 14.234843] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:05:06.843 2025] [ 14.234861] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.846 2025] [ 14.234908] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:05:06.852 2025] [ 14.234914] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:05:06.858 2025] [ 14.234926] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.864 2025] [ 14.234960] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:05:06.870 2025] [ 14.234964] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:05:06.876 2025] [ 14.234971] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.882 2025] [ 14.235005] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:05:06.888 2025] [ 14.235010] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:05:06.894 2025] [ 14.235017] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.901 2025] [ 14.235050] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:05:06.907 2025] [ 14.235055] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:05:06.913 2025] [ 14.235062] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.922 2025] [ 14.235340] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:05:06.925 2025] [ 14.235348] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:05:06.931 2025] [ 14.235357] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.937 2025] [ 14.235397] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:05:06.944 2025] [ 14.235402] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:05:06.950 2025] [ 14.235409] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:06.956 2025] [ 14.235444] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:05:06.962 2025] [ 14.235449] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:05:06.969 2025] [ 14.235455] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:07.317 2025] [ 14.723211] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:05:10.604 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:05:10.609 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:05:12.411 2025] [ 19.818429] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:05:12.420 2025] [ 19.818454] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:05:12.428 2025] [ 19.818475] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.430 2025] [ 19.818531] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:05:12.437 2025] [ 19.818536] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:05:12.445 2025] [ 19.818544] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.451 2025] [ 19.818581] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:05:12.457 2025] [ 19.818586] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:05:12.463 2025] [ 19.818594] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.469 2025] [ 19.818630] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:05:12.474 2025] [ 19.818636] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:05:12.481 2025] [ 19.818642] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.487 2025] [ 19.818677] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:05:12.493 2025] [ 19.818682] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:05:12.499 2025] [ 19.818689] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.505 2025] [ 19.818723] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:05:12.511 2025] [ 19.818729] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:05:12.517 2025] [ 19.818735] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.523 2025] [ 19.818771] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:05:12.532 2025] [ 19.818776] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:05:12.536 2025] [ 19.818783] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.542 2025] [ 19.818816] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:05:12.549 2025] [ 19.818823] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:05:12.558 2025] [ 19.818830] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.561 2025] [ 19.894732] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:05:12.567 2025] [ 19.894762] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:05:12.573 2025] [ 19.894785] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.579 2025] [ 19.894849] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:05:12.585 2025] [ 19.894854] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:05:12.591 2025] [ 19.894862] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.598 2025] [ 19.894903] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:05:12.603 2025] [ 19.894908] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:05:12.609 2025] [ 19.894917] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.616 2025] [ 19.894953] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:05:12.626 2025] [ 19.894958] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:05:12.631 2025] [ 19.894967] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.635 2025] [ 19.895003] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:05:12.641 2025] [ 19.895008] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:05:12.646 2025] [ 19.895015] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.653 2025] [ 19.895052] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:05:12.658 2025] [ 19.895058] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:05:12.664 2025] [ 19.895066] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.675 2025] [ 19.895183] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:05:12.678 2025] [ 19.895191] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:05:12.685 2025] [ 19.895198] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:12.691 2025] [ 19.895239] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:05:12.697 2025] [ 19.895244] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:05:12.703 2025] [ 19.895256] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:05:45.130 2025] [Fri Jan 03 14:05:45.130 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:05:45.146 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:05:45.192 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:05:45.220 2025] Trying to boot from MMC1 [Fri Jan 03 14:05:45.381 2025] Authentication passed [Fri Jan 03 14:05:45.397 2025] Authentication passed [Fri Jan 03 14:05:45.397 2025] Authentication passed [Fri Jan 03 14:05:45.429 2025] Authentication passed [Fri Jan 03 14:05:45.429 2025] Authentication passed [Fri Jan 03 14:05:45.444 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:05:45.444 2025] [Fri Jan 03 14:05:45.460 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:05:45.460 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:05:45.757 2025] [Fri Jan 03 14:05:45.757 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:05:45.762 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:05:45.805 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:05:45.808 2025] Error: could not access storage. [Fri Jan 03 14:05:45.813 2025] Trying to boot from MMC1 [Fri Jan 03 14:05:45.972 2025] Authentication passed [Fri Jan 03 14:05:45.977 2025] Authentication passed [Fri Jan 03 14:05:46.628 2025] [Fri Jan 03 14:05:46.628 2025] [Fri Jan 03 14:05:46.628 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:05:46.636 2025] [Fri Jan 03 14:05:46.636 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:05:46.636 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:05:46.641 2025] DRAM: 2 GiB [Fri Jan 03 14:05:46.879 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:05:46.883 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:05:46.894 2025] Loading Environment from MMC... OK [Fri Jan 03 14:05:47.102 2025] In: serial [Fri Jan 03 14:05:47.102 2025] Out: serial [Fri Jan 03 14:05:47.106 2025] Err: serial [Fri Jan 03 14:05:47.107 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:05:47.107 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:05:47.263 2025] switch to partitions #0, OK [Fri Jan 03 14:05:47.267 2025] mmc0(part 0) is current device [Fri Jan 03 14:05:47.410 2025] SD/MMC found on device 0 [Fri Jan 03 14:05:47.413 2025] Running eMMC boot ... [Fri Jan 03 14:05:47.431 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:05:47.435 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:05:47.440 2025] Importing environment from mmc0 ... [Fri Jan 03 14:05:47.663 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:05:47.683 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:05:47.688 2025] Working FDT set to 88000000 [Fri Jan 03 14:05:47.692 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:05:47.697 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:05:47.701 2025] Working FDT set to 88000000 [Fri Jan 03 14:05:47.723 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:05:47.730 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:05:47.743 2025] Working FDT set to 8feed000 [Fri Jan 03 14:05:47.749 2025] [Fri Jan 03 14:05:47.749 2025] Starting kernel ... [Fri Jan 03 14:05:47.758 2025] [Fri Jan 03 14:05:47.786 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:05:47.795 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:05:47.811 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:05:47.816 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:05:47.907 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:05:47.915 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:05:47.917 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:05:47.924 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:05:47.931 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:05:47.940 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:05:47.953 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:05:47.958 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:05:47.967 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:05:47.975 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:05:47.984 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:05:47.992 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:05:48.002 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:05:48.010 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:05:48.019 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:05:48.024 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:05:48.030 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:05:48.034 2025] [ 0.000000] Normal empty [Fri Jan 03 14:05:48.040 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:05:48.044 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:05:48.049 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:05:48.054 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:05:48.059 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:05:48.064 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:05:48.070 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:05:48.076 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:05:48.081 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:05:48.087 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:05:48.094 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:05:48.100 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:05:48.105 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:05:48.111 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:05:48.116 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:05:48.122 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:05:48.127 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:05:48.133 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:05:48.139 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:05:48.139 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:05:48.146 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:05:48.157 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:05:48.160 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:05:48.165 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:05:48.171 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:05:48.220 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:05:48.229 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:05:48.237 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:05:48.245 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:05:48.251 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:05:48.269 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:05:48.275 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:05:48.281 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:05:48.287 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:05:48.293 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:05:48.299 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:05:48.305 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:05:48.312 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:05:48.318 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:05:48.324 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:05:48.329 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:05:48.334 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:05:48.339 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:05:48.344 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:05:48.350 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:05:48.350 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:05:48.358 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:05:48.365 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:05:48.375 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:05:48.381 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:05:48.387 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:05:48.393 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:05:48.399 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:05:48.406 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:05:48.413 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:05:48.423 2025] [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:05:48.431 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 14:05:48.438 2025] [ 0.528884] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:05:48.449 2025] [ 0.528895] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:05:48.456 2025] [ 0.528979] LSM: Security Framework initializing [Fri Jan 03 14:05:48.461 2025] [ 0.529114] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:05:48.467 2025] [ 0.529137] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:05:48.474 2025] [ 0.530828] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:05:48.480 2025] [ 0.530835] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:05:48.487 2025] [ 0.530880] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:05:48.493 2025] [ 0.583335] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:05:48.498 2025] [ 0.583587] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:05:48.507 2025] [ 0.583672] EFI services will not be available. [Fri Jan 03 14:05:48.513 2025] [ 0.583931] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:05:48.518 2025] [ 0.584699] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:05:48.523 2025] [ 0.584811] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:05:48.529 2025] [ 0.584828] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:05:48.534 2025] [ 0.584883] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:05:48.544 2025] [ 0.634971] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:05:48.546 2025] [ 0.635057] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:05:48.554 2025] [ 0.635070] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:05:48.561 2025] [ 0.635104] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:05:48.569 2025] [ 0.660979] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:05:48.574 2025] [ 0.661062] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:05:48.580 2025] [ 0.661075] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:05:48.587 2025] [ 0.661108] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:05:48.593 2025] [ 0.661166] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:05:48.599 2025] [ 0.661171] SMP: Total of 4 processors activated. [Fri Jan 03 14:05:48.605 2025] [ 0.695362] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:05:48.610 2025] [ 0.695367] CPU features: detected: CRC32 instructions [Fri Jan 03 14:05:48.616 2025] [ 0.695410] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:05:48.621 2025] [ 0.695412] alternatives: applying system-wide alternatives [Fri Jan 03 14:05:48.626 2025] [ 0.696885] devtmpfs: initialized [Fri Jan 03 14:05:48.631 2025] [ 0.708490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:05:48.639 2025] [ 0.708517] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:05:48.644 2025] [ 0.713686] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:05:48.650 2025] [ 0.714484] DMI not present or invalid. [Fri Jan 03 14:05:48.656 2025] [ 0.715018] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:05:48.662 2025] [ 0.753267] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:05:48.668 2025] [ 0.753587] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:05:48.676 2025] [ 0.753760] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:05:48.684 2025] [ 0.753899] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:05:48.690 2025] [ 0.754058] audit: type=2000 audit(0.751:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:05:48.697 2025] [ 0.754670] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:05:48.707 2025] [ 0.754675] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:05:48.710 2025] [ 0.754907] ASID allocator initialised with 65536 entries [Fri Jan 03 14:05:48.716 2025] [ 0.769770] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:05:48.723 2025] [ 0.778837] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:05:48.730 2025] [ 0.778848] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:05:48.736 2025] [ 0.778852] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:05:48.743 2025] [ 0.778855] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:05:48.749 2025] [ 0.778858] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:05:48.756 2025] [ 0.778861] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:05:48.763 2025] [ 0.778865] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:05:48.770 2025] [ 0.778868] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:05:48.776 2025] [ 0.780060] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:05:48.785 2025] [ 0.780618] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:05:48.792 2025] [ 0.780626] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:05:48.799 2025] [ 0.780645] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:05:48.810 2025] [ 0.780660] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:05:48.816 2025] [ 0.780671] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:05:48.823 2025] [ 0.780677] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:05:48.829 2025] [ 0.780896] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:05:48.837 2025] [ 0.780901] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:05:48.844 2025] [ 0.780910] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:05:48.852 2025] [ 0.780923] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:05:48.861 2025] [ 0.780931] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:05:48.868 2025] [ 0.780935] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:05:48.875 2025] [ 0.781190] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:05:48.884 2025] [ 0.781195] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:05:48.890 2025] [ 0.781204] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:05:48.899 2025] [ 0.781216] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:05:48.907 2025] [ 0.781236] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:05:48.915 2025] [ 0.781240] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:05:48.921 2025] [ 0.781474] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:05:48.929 2025] [ 0.781479] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:05:48.936 2025] [ 0.781487] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:05:48.947 2025] [ 0.781500] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:05:48.953 2025] [ ‚rºÂŠª‚Âêreg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 14:05:48.965 2025] [ 1.05[3339] printk: console [ttyS2] printing thread started [Fri Jan 03 14:05:48.967 2025] 0.781512] reg-fixed-voltage regulator-3: No GPIO consumer (null) found [Fri Jan 03 14:05:48.974 2025] [ 1.053360] printk: console [ttyS2] enabled [Fri Jan 03 14:05:48.983 2025] [ 1.053364] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:05:48.983 2025] [ 1.065760] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:05:48.991 2025] [ 1.066951] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:05:48.998 2025] [ 1.066961] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:05:49.007 2025] [ 1.066975] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:05:49.015 2025] [ 1.066992] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:05:49.023 2025] [ 1.067004] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.031 2025] [ 1.067009] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:05:49.039 2025] [ 1.067039] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:05:49.048 2025] [ 1.068013] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:05:49.056 2025] [ 1.068022] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:05:49.057 2025] [ 1.068034] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:05:49.067 2025] [ 1.068048] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:05:49.076 2025] [ 1.068090] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.083 2025] [ 1.068094] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:05:49.092 2025] [ 1.071050] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:05:49.099 2025] [ 1.077599] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:05:49.106 2025] [ 1.084292] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:05:49.113 2025] [ 1.084715] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:05:49.119 2025] [ 1.084725] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:05:49.126 2025] [ 1.084741] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:05:49.133 2025] [ 1.084758] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:05:49.142 2025] [ 1.084772] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.150 2025] [ 1.084778] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:05:49.157 2025] [ 1.118081] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:05:49.164 2025] [ 1.118370] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:05:49.171 2025] [ 1.119176] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:05:49.178 2025] [ 1.119185] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:05:49.185 2025] [ 1.119197] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:05:49.194 2025] [ 1.119224] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:05:49.206 2025] [ 1.119239] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.214 2025] [ 1.119243] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:05:49.221 2025] [ 1.119983] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:05:49.228 2025] [ 1.120032] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:05:49.240 2025] [ 1.120333] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:05:49.247 2025] [ 1.120346] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:05:49.255 2025] [ 1.120351] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:05:49.261 2025] [ 1.121129] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:05:49.269 2025] [ 1.137594] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:05:49.275 2025] [ 1.142430] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:05:49.284 2025] [ 1.142516] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:05:49.291 2025] [ 1.142523] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:05:49.297 2025] [ 1.142537] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:05:49.306 2025] [ 1.142563] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:05:49.321 2025] [ 1.142576] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.323 2025] [ 1.142580] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:05:49.329 2025] [ 1.143042] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:05:49.335 2025] [ 1.143053] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:05:49.341 2025] [ 1.143089] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:05:49.350 2025] [ 1.143111] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:05:49.360 2025] [ 1.143123] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.366 2025] [ 1.143127] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:05:49.372 2025] [ 1.143137] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:05:49.379 2025] [ 1.143141] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:05:49.386 2025] [ 1.143149] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:05:49.394 2025] [ 1.143161] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:05:49.404 2025] [ 1.143170] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.411 2025] [ 1.143173] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:05:49.420 2025] [ 1.143887] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:05:49.423 2025] [ 1.143896] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:05:49.430 2025] [ 1.143908] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:05:49.439 2025] [ 1.143927] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:05:49.449 2025] [ 1.143937] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.456 2025] [ 1.143945] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:05:49.462 2025] [ 1.143948] mmc1: CQHCI version 5.10 [Fri Jan 03 14:05:49.466 2025] [ 1.143948] mmc0: CQHCI version 5.10 [Fri Jan 03 14:05:49.472 2025] [ 1.144494] mmc2: CQHCI version 5.10 [Fri Jan 03 14:05:49.477 2025] [ 1.147482] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:05:49.483 2025] [ 1.149900] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:05:49.491 2025] [ 1.152851] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:05:49.497 2025] [ 1.153050] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:05:49.503 2025] [ 1.153126] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:05:49.509 2025] [ 1.156391] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:05:49.518 2025] [ 1.156616] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:05:49.521 2025] [ 1.156679] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:05:49.531 2025] [ 1.158390] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:05:49.535 2025] [ 1.158401] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:05:49.543 2025] [ 1.158426] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:05:49.552 2025] [ 1.158443] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:05:49.558 2025] [ 1.158458] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:05:49.565 2025] [ 1.158462] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:05:49.571 2025] [ 1.158470] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:05:49.580 2025] [ 1.158482] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:05:49.587 2025] [ 1.158494] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:05:49.587 2025] [ 1.158499] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:05:49.603 2025] [ 1.158930] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:05:49.603 2025] [ 1.158935] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:05:49.603 2025] [ 1.158948] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:05:49.618 2025] [ 1.158959] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:05:49.628 2025] [ 1.158963] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:05:49.635 2025] [ 1.159551] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:05:49.635 2025] [ 1.159568] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:05:49.650 2025] [ 1.159572] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:05:49.650 2025] [ 1.159670] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:05:49.666 2025] [ 1.159681] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:05:49.666 2025] [ 1.159685] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:05:49.666 2025] [ 1.159753] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:05:49.681 2025] [ 1.159764] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:05:49.681 2025] [ 1.159767] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:05:49.697 2025] [ 1.160369] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:05:49.697 2025] [ 1.162999] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:05:49.697 2025] [ 1.175563] ALSA device list: [Fri Jan 03 14:05:49.713 2025] [ 1.175576] No soundcards found. [Fri Jan 03 14:05:49.713 2025] [ 1.181085] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:05:49.713 2025] [ 1.186255] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:05:49.728 2025] [ 1.196277] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:05:49.744 2025] [ 1.196451] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:05:49.744 2025] [ 1.242345] mmc1: new MMC card at address 0001 [Fri Jan 03 14:05:49.744 2025] [ 1.243267] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:05:49.744 2025] [ 1.251591] mmcblk1: p1 [Fri Jan 03 14:05:49.760 2025] [ 1.252436] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:05:49.760 2025] [ 1.254114] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:05:49.760 2025] [ 1.255477] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:05:49.775 2025] [ 1.333896] mmc0: Command Queue Engine enabled [Fri Jan 03 14:05:49.775 2025] [ 1.333912] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:05:49.775 2025] [ 1.334690] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:05:49.791 2025] [ 1.338573] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:05:49.791 2025] [ 1.339651] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:05:49.791 2025] [ 1.340951] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:05:49.806 2025] [ 1.342053] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:05:49.806 2025] [ 1.360684] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:05:49.806 2025] [ 1.361072] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:49.822 2025] [ 1.361158] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:05:49.829 2025] [ 1.361315] devtmpfs: mounted [Fri Jan 03 14:05:49.829 2025] [ 1.362778] Freeing unused kernel memory: 1856K [Fri Jan 03 14:05:49.838 2025] [ 1.369157] Run /sbin/init as init process [Fri Jan 03 14:05:49.838 2025] [ 1.369162] with arguments: [Fri Jan 03 14:05:49.838 2025] [ 1.369163] /sbin/init [Fri Jan 03 14:05:49.838 2025] [ 1.369165] with environment: [Fri Jan 03 14:05:49.854 2025] [ 1.369166] HOME=/ [Fri Jan 03 14:05:49.854 2025] [ 1.369169] TERM=linux [Fri Jan 03 14:05:49.854 2025] [ 1.369170] syntec_extend= [Fri Jan 03 14:05:49.854 2025] [ 1.460142] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:05:49.854 2025] [ 1.492415] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:05:49.869 2025] [ 1.493613] Segment Routing with IPv6 [Fri Jan 03 14:05:49.869 2025] [ 1.493645] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:05:49.869 2025] [ 1.510741] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:05:49.901 2025] [ 1.511381] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:05:49.901 2025] [ 1.514583] systemd[1]: Hostname set to . [Fri Jan 03 14:05:49.916 2025] [ 1.645411] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:05:49.932 2025] [ 1.949666] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:05:49.948 2025] [ 1.952415] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:05:49.964 2025] [ 2.015307] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:05:49.979 2025] [ 2.018580] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:05:49.979 2025] [ 2.020272] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:05:49.995 2025] [ 2.020779] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:05:49.995 2025] [ 2.021145] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:05:50.010 2025] [ 2.021351] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:05:50.010 2025] [ 2.021704] systemd[1]: Reached target Path Units. [Fri Jan 03 14:05:50.010 2025] [ 2.021799] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:05:50.029 2025] [ 2.021870] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:05:50.029 2025] [ 2.021959] systemd[1]: Reached target Swaps. [Fri Jan 03 14:05:50.029 2025] [ 2.026195] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:05:50.042 2025] [ 2.026359] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:05:50.042 2025] [ 2.032412] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:05:50.042 2025] [ 2.032914] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:05:50.058 2025] [ 2.033731] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:05:50.058 2025] [ 2.034284] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:05:50.073 2025] [ 2.034887] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:05:50.073 2025] [ 2.035732] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:05:50.073 2025] [ 2.037544] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:05:50.089 2025] [ 2.038021] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:05:50.089 2025] [ 2.038525] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:05:50.105 2025] [ 2.079883] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:05:50.120 2025] [ 2.083961] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:05:50.136 2025] [ 2.088420] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:05:50.136 2025] [ 2.089197] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:05:50.152 2025] [ 2.090515] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:05:50.152 2025] [ 2.095673] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:05:50.168 2025] [ 2.103003] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:05:50.168 2025] [ 2.108027] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:05:50.183 2025] [ 2.113240] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:05:50.183 2025] [ 2.118004] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:05:50.183 2025] [ 2.124465] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:05:50.183 2025] [ 2.124997] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:05:50.199 2025] [ 2.126436] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:05:50.215 2025] [ 2.126459] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:05:50.230 2025] [ 2.130039] systemd[1]: Starting Journal Service... [Fri Jan 03 14:05:50.231 2025] [ 2.134111] fuse: init (API version 7.37) [Fri Jan 03 14:05:50.231 2025] [ 2.140996] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:05:50.246 2025] [ 2.149280] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:05:50.246 2025] [ 2.158000] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:05:50.246 2025] [ 2.162916] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:05:50.262 2025] [ 2.167991] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:05:50.262 2025] [ 2.181988] systemd[1]: Started RPC Bind. [Fri Jan 03 14:05:50.262 2025] [ 2.183277] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:05:50.278 2025] [ 2.183278] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:05:50.278 2025] [ 2.187410] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:05:50.278 2025] [ 2.189013] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:05:50.293 2025] [ 2.190745] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:05:50.293 2025] [ 2.196714] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:05:50.293 2025] [ 2.206003] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:05:50.309 2025] [ 2.207824] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:05:50.309 2025] [ 2.208846] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:05:50.324 2025] [ 2.220201] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:05:50.330 2025] [ 2.220385] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:05:50.330 2025] [ 2.221287] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:05:50.341 2025] [ 2.224819] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:05:50.341 2025] [ 2.225560] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:05:50.356 2025] [ 2.228789] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:05:50.356 2025] [ 2.234001] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:05:50.356 2025] [ 2.235604] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:05:50.372 2025] [ 2.236867] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:05:50.372 2025] [ 2.262916] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:05:50.387 2025] [ 2.269518] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:05:50.387 2025] [ 2.272592] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:05:50.403 2025] [ 2.273239] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:05:50.419 2025] [ 2.283470] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:05:50.419 2025] [ 2.283952] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:05:50.435 2025] [ 2.292680] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:05:50.435 2025] [ 2.297592] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:05:50.435 2025] [ 2.298490] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:05:50.450 2025] [ 2.355468] systemd[1]: Started Journal Service. [Fri Jan 03 14:05:50.450 2025] [ 2.395154] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:05:50.702 2025] [ 2.800336] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:05:50.718 2025] [ 2.800355] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:05:50.718 2025] [ 2.800379] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:05:50.734 2025] [ 2.800410] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:05:50.749 2025] [ 2.800429] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:05:50.749 2025] [ 2.812963] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:05:50.765 2025] [ 2.812981] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:05:50.812 2025] [ 2.813010] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:05:50.859 2025] [ 2.813042] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:05:50.859 2025] [ 2.813054] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:05:50.859 2025] [ 2.813135] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:05:50.875 2025] [ 2.813152] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:05:50.890 2025] [ 2.813172] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:05:50.922 2025] [ 2.813180] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:05:50.932 2025] [ 2.813184] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:05:50.953 2025] [ 2.813195] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:05:50.969 2025] [ 2.813206] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:05:50.985 2025] [ 2.818285] mc: Linux media interface: v0.10 [Fri Jan 03 14:05:50.985 2025] [ 2.819699] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:05:51.000 2025] [ 2.819715] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:05:51.000 2025] [ 2.819744] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:05:51.000 2025] [ 2.819746] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:05:51.016 2025] [ 2.819783] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:05:51.016 2025] [ 2.830254] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:05:51.032 2025] [ 2.845687] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:05:51.032 2025] [ 2.846798] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:36:08 UTC (1681065368) [Fri Jan 03 14:05:51.048 2025] [ 2.854915] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:05:51.079 2025] [ 2.854953] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:05:51.095 2025] [ 3.004690] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:05:51.110 2025] [ 3.004968] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:05:51.126 2025] [ 3.005052] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:05:51.132 2025] [ 3.006290] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:05:51.158 2025] [ 3.007807] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:05:51.189 2025] [ 3.007847] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:05:51.205 2025] [ 3.007887] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:05:51.221 2025] [ 3.007898] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:05:51.233 2025] [ 3.124900] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:05:51.237 2025] [ 3.125115] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:05:51.252 2025] [ 3.125280] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:05:51.252 2025] [ 3.125709] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:05:51.252 2025] [ 3.125783] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:05:51.268 2025] [ 3.139318] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:05:51.268 2025] [ 3.139356] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:05:51.283 2025] [ 3.143358] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:05:51.283 2025] [ 3.143407] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 14:05:51.299 2025] [ 3.143416] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:05:51.299 2025] [ 3.147427] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:05:51.330 2025] [ 3.153756] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:05:51.332 2025] [ 3.180448] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:05:51.332 2025] [ 3.180485] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:05:51.332 2025] [ 3.180491] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:05:51.346 2025] [ 3.180513] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:05:51.362 2025] [ 3.180545] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:05:51.362 2025] [ 3.180561] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:05:51.378 2025] [ 3.180567] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:05:51.378 2025] [ 3.203115] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:05:51.393 2025] [ 3.284627] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:05:51.393 2025] [ 3.285394] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:05:51.409 2025] [ 3.285427] Get kick_gpio number= (418) [Fri Jan 03 14:05:51.701 2025] [ 3.791128] random: crng init done [Fri Jan 03 14:05:51.861 2025] [ 3.953642] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:05:51.867 2025] [ 3.953662] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:05:51.873 2025] [ 3.953682] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:05:51.911 2025] [ 3.953714] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:05:51.933 2025] [ 3.953730] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:05:51.945 2025] [ 3.953736] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:05:51.959 2025] [ 3.953939] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:05:51.978 2025] [ 4.006494] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:05:51.985 2025] [ 4.006995] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:05:52.047 2025] [ 4.138268] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:05:52.064 2025] [ 4.152635] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:05:52.072 2025] [ 4.152693] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:05:52.095 2025] [ 4.152942] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:05:52.101 2025] [ 4.152957] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:05:52.124 2025] [ 4.165406] xhci-hcd xhci-hcd.4.auto: irq 468, io mem 0x31100000 [Fri Jan 03 14:05:52.139 2025] [ 4.166747] hub 1-0:1.0: USB hub found [Fri Jan 03 14:05:52.144 2025] [ 4.166797] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:05:52.313 2025] [ 4.405177] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:05:52.490 2025] [ 4.582222] hub 1-1:1.0: USB hub found [Fri Jan 03 14:05:52.493 2025] [ 4.582372] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:05:53.078 2025] [ 5.169411] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:05:53.106 2025] [ 5.198818] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:05:53.122 2025] [ 5.202677] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:05:53.132 2025] [ 5.202720] cfg80211: failed to load regulatory.db [Fri Jan 03 14:05:53.237 2025] [ 5.330568] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:05:53.246 2025] [ 5.330599] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:05:53.285 2025] [ 5.378039] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:05:53.290 2025] [ 5.378242] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:53.299 2025] [ 5.388712] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:05:53.304 2025] [ 5.388750] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:53.323 2025] [ 5.416855] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:05:53.328 2025] [ 5.416892] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:53.350 2025] [ 5.441611] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:05:53.403 2025] [ 5.495549] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:05:53.407 2025] [ 5.495934] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:53.682 2025] [ 5.784843] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:05:53.682 2025] [ 5.786017] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:05:53.836 2025] [ 5.928556] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:05:53.871 2025] [ 5.965349] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:05:53.871 2025] [ 5.965381] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:05:54.202 2025] *************************************************************** [Fri Jan 03 14:05:54.202 2025] *************************************************************** [Fri Jan 03 14:05:54.218 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:05:54.218 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:05:54.234 2025] bash [Fri Jan 03 14:05:54.234 2025] cifs-utils [Fri Jan 03 14:05:54.234 2025] dosfstools [Fri Jan 03 14:05:54.234 2025] grub-common [Fri Jan 03 14:05:54.237 2025] grub-editenv [Fri Jan 03 14:05:54.237 2025] grub-efi [Fri Jan 03 14:05:54.237 2025] less [Fri Jan 03 14:05:54.237 2025] lib32-libgcc1 [Fri Jan 03 14:05:54.237 2025] lib32-libstdc++6 [Fri Jan 03 14:05:54.237 2025] libdw1 [Fri Jan 03 14:05:54.237 2025] libelf1 [Fri Jan 03 14:05:54.237 2025] libgcc1 [Fri Jan 03 14:05:54.250 2025] libgdbm-compat4 [Fri Jan 03 14:05:54.250 2025] libgdbm6 [Fri Jan 03 14:05:54.250 2025] libgmp10 [Fri Jan 03 14:05:54.250 2025] libidn2-0 [Fri Jan 03 14:05:54.250 2025] libreadline8 [Fri Jan 03 14:05:54.250 2025] libstdc++6 [Fri Jan 03 14:05:54.250 2025] libunistring2 [Fri Jan 03 14:05:54.250 2025] libvte-2.91-0 [Fri Jan 03 14:05:54.250 2025] nettle [Fri Jan 03 14:05:54.250 2025] onboard [Fri Jan 03 14:05:54.250 2025] parted [Fri Jan 03 14:05:54.250 2025] rxvt-unicode [Fri Jan 03 14:05:54.250 2025] [Fri Jan 03 14:05:54.250 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:05:54.265 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:05:54.265 2025] the opkg remove command. i.e.: [Fri Jan 03 14:05:54.265 2025] opkg remove [Fri Jan 03 14:05:54.265 2025] Where is the name printed in the list above [Fri Jan 03 14:05:54.281 2025] [Fri Jan 03 14:05:54.281 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:05:54.281 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:05:54.281 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:05:54.297 2025] also remove the dependent packages as well [Fri Jan 03 14:05:54.297 2025] *************************************************************** [Fri Jan 03 14:05:54.297 2025] *************************************************************** [Fri Jan 03 14:05:59.836 2025] [Fri Jan 03 14:05:59.836 2025] _____ _____ _ _ [Fri Jan 03 14:05:59.836 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:05:59.851 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:05:59.858 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:05:59.858 2025] |___| |___| [Fri Jan 03 14:05:59.868 2025] [Fri Jan 03 14:05:59.868 2025] Arago Project am62xx-evm - [Fri Jan 03 14:05:59.868 2025] [Fri Jan 03 14:05:59.868 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:05:59.868 2025] [Fri Jan 03 14:05:59.868 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:06:00.135 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:06:00.324 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:06:00.324 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:06:00.513 2025] [ 12.603957] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:00.513 2025] [ 12.603981] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:00.513 2025] [ 12.604001] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.529 2025] [ 12.604149] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:00.529 2025] [ 12.604160] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:00.529 2025] [ 12.604174] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.544 2025] [ 12.604224] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:00.544 2025] [ 12.604229] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:00.544 2025] [ 12.604239] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.560 2025] [ 12.604275] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:00.560 2025] [ 12.604280] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:00.576 2025] [ 12.604287] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.576 2025] [ 12.604328] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:00.576 2025] [ 12.604333] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:00.592 2025] [ 12.604340] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.592 2025] [ 12.604375] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:00.607 2025] [ 12.604380] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:00.607 2025] [ 12.604391] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.623 2025] [ 12.604425] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:00.623 2025] [ 12.604430] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:00.623 2025] [ 12.604437] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:00.638 2025] [ 12.604475] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:00.638 2025] [ 12.604480] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:00.638 2025] [ 12.604488] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.800 2025] [ 14.892904] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:02.804 2025] [ 14.892931] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:02.810 2025] [ 14.892948] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.817 2025] [ 14.892999] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:02.827 2025] [ 14.893005] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:02.829 2025] [ 14.893012] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.838 2025] [ 14.893046] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:02.841 2025] [ 14.893051] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:02.850 2025] [ 14.893340] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.853 2025] [ 14.893403] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:02.859 2025] [ 14.893408] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:02.867 2025] [ 14.893416] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.872 2025] [ 14.893453] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:02.878 2025] [ 14.893457] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:02.884 2025] [ 14.893464] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.890 2025] [ 14.893499] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:02.896 2025] [ 14.893505] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:02.906 2025] [ 14.893512] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.908 2025] [ 14.893545] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:02.915 2025] [ 14.893550] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:02.920 2025] [ 14.893557] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:02.926 2025] [ 14.893594] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:02.933 2025] [ 14.893599] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:02.942 2025] [ 14.893607] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:03.290 2025] [ 15.382554] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:06:06.545 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:06:06.560 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:06:08.378 2025] [ 20.470364] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:08.382 2025] [ 20.470393] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:08.388 2025] [ 20.470412] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.395 2025] [ 20.470476] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:08.404 2025] [ 20.470481] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:08.407 2025] [ 20.470490] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.414 2025] [ 20.470534] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:08.419 2025] [ 20.470538] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:08.425 2025] [ 20.470545] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.431 2025] [ 20.470580] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:08.437 2025] [ 20.470585] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:08.461 2025] [ 20.470597] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.464 2025] [ 20.470632] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:08.474 2025] [ 20.470636] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:08.478 2025] [ 20.470644] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.485 2025] [ 20.470680] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:08.490 2025] [ 20.470685] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:08.496 2025] [ 20.470692] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.506 2025] [ 20.470724] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:08.509 2025] [ 20.470729] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:08.516 2025] [ 20.470742] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.521 2025] [ 20.470775] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:08.527 2025] [ 20.470781] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:08.537 2025] [ 20.470788] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.540 2025] [ 20.548541] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:08.546 2025] [ 20.548569] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:08.552 2025] [ 20.548589] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.558 2025] [ 20.548643] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:08.565 2025] [ 20.548648] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:08.571 2025] [ 20.548655] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.577 2025] [ 20.548691] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:08.583 2025] [ 20.548697] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:08.588 2025] [ 20.548703] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.594 2025] [ 20.548738] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:08.601 2025] [ 20.548743] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:08.611 2025] [ 20.548750] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.614 2025] [ 20.548786] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:08.620 2025] [ 20.548791] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:08.626 2025] [ 20.548799] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.632 2025] [ 20.548833] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:08.638 2025] [ 20.548840] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:08.644 2025] [ 20.548846] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.650 2025] [ 20.548880] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:08.655 2025] [ 20.548886] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:08.665 2025] [ 20.548893] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:08.668 2025] [ 20.548927] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:08.674 2025] [ 20.548933] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:08.681 2025] [ 20.548939] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:41.195 2025] [Fri Jan 03 14:06:41.196 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:06:41.219 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:06:41.267 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:06:41.287 2025] Trying to boot from MMC1 [Fri Jan 03 14:06:41.458 2025] Authentication passed [Fri Jan 03 14:06:41.466 2025] Authentication passed [Fri Jan 03 14:06:41.471 2025] Authentication passed [Fri Jan 03 14:06:41.506 2025] Authentication passed [Fri Jan 03 14:06:41.512 2025] Authentication passed [Fri Jan 03 14:06:41.518 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:06:41.519 2025] [Fri Jan 03 14:06:41.523 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:06:41.527 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:06:41.822 2025] [Fri Jan 03 14:06:41.822 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:06:41.822 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:06:41.868 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:06:41.868 2025] Error: could not access storage. [Fri Jan 03 14:06:41.868 2025] Trying to boot from MMC1 [Fri Jan 03 14:06:42.026 2025] Authentication passed [Fri Jan 03 14:06:42.041 2025] Authentication passed [Fri Jan 03 14:06:42.687 2025] [Fri Jan 03 14:06:42.687 2025] [Fri Jan 03 14:06:42.687 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:06:42.702 2025] [Fri Jan 03 14:06:42.702 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:06:42.702 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:06:42.709 2025] DRAM: 2 GiB [Fri Jan 03 14:06:42.939 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:06:42.955 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:06:42.971 2025] Loading Environment from MMC... OK [Fri Jan 03 14:06:43.160 2025] In: serial [Fri Jan 03 14:06:43.160 2025] Out: serial [Fri Jan 03 14:06:43.176 2025] Err: serial [Fri Jan 03 14:06:43.176 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:06:43.176 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:06:43.334 2025] switch to partitions #0, OK [Fri Jan 03 14:06:43.334 2025] mmc0(part 0) is current device [Fri Jan 03 14:06:43.475 2025] SD/MMC found on device 0 [Fri Jan 03 14:06:43.475 2025] Running eMMC boot ... [Fri Jan 03 14:06:43.490 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:06:43.506 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:06:43.506 2025] Importing environment from mmc0 ... [Fri Jan 03 14:06:43.726 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:06:43.742 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:06:43.758 2025] Working FDT set to 88000000 [Fri Jan 03 14:06:43.758 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:06:43.758 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:06:43.758 2025] Working FDT set to 88000000 [Fri Jan 03 14:06:43.789 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:06:43.789 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:06:43.805 2025] Working FDT set to 8feed000 [Fri Jan 03 14:06:43.821 2025] [Fri Jan 03 14:06:43.821 2025] Starting kernel ... [Fri Jan 03 14:06:43.821 2025] [Fri Jan 03 14:06:43.852 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:06:43.852 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:06:43.868 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:06:43.883 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:06:43.977 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:06:43.977 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:06:43.977 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:06:43.993 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:06:43.993 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:06:44.014 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:06:44.014 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:06:44.025 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:06:44.025 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:06:44.040 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:06:44.056 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:06:44.056 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:06:44.072 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:06:44.072 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:06:44.087 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:06:44.087 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:06:44.087 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:06:44.103 2025] [ 0.000000] Normal empty [Fri Jan 03 14:06:44.103 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:06:44.103 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:06:44.114 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:06:44.119 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:06:44.119 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:06:44.119 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:06:44.135 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:06:44.135 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:06:44.150 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:06:44.150 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:06:44.166 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:06:44.166 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:06:44.166 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:06:44.166 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:06:44.181 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:06:44.181 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:06:44.181 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:06:44.197 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:06:44.197 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:06:44.213 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:06:44.214 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:06:44.214 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:06:44.229 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:06:44.229 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:06:44.229 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:06:44.291 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:06:44.291 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:06:44.307 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:06:44.314 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:06:44.314 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:06:44.339 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:06:44.339 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:06:44.339 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:06:44.354 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:06:44.354 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:06:44.354 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:06:44.370 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:06:44.370 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:06:44.385 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:06:44.385 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:06:44.385 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:06:44.401 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:06:44.401 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:06:44.415 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:06:44.417 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:06:44.417 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:06:44.433 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:06:44.433 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:06:44.433 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:06:44.448 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:06:44.448 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:06:44.464 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:06:44.464 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:06:44.464 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:06:44.480 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:06:44.480 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:06:44.495 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:06:44.511 2025] [ 0.528873] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:06:44.515 2025] [ 0.528884] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:06:44.515 2025] [ 0.528964] LSM: Security Framework initializing [Fri Jan 03 14:06:44.527 2025] [ 0.529100] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:06:44.527 2025] [ 0.529123] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:06:44.543 2025] [ 0.530827] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:06:44.543 2025] [ 0.530834] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:06:44.543 2025] [ 0.530879] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:06:44.558 2025] [ 0.583341] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:06:44.558 2025] [ 0.583584] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:06:44.574 2025] [ 0.583669] EFI services will not be available. [Fri Jan 03 14:06:44.574 2025] [ 0.583924] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:06:44.574 2025] [ 0.584702] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:06:44.589 2025] [ 0.584816] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:06:44.589 2025] [ 0.584833] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:06:44.605 2025] [ 0.584890] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:06:44.615 2025] [ 0.634976] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:06:44.615 2025] [ 0.635062] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:06:44.621 2025] [ 0.635075] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:06:44.621 2025] [ 0.635109] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:06:44.637 2025] [ 0.660987] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:06:44.637 2025] [ 0.661072] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:06:44.637 2025] [ 0.661086] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:06:44.652 2025] [ 0.661117] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:06:44.652 2025] [ 0.661175] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:06:44.668 2025] [ 0.661182] SMP: Total of 4 processors activated. [Fri Jan 03 14:06:44.668 2025] [ 0.695371] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:06:44.668 2025] [ 0.695375] CPU features: detected: CRC32 instructions [Fri Jan 03 14:06:44.684 2025] [ 0.695421] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:06:44.684 2025] [ 0.695423] alternatives: applying system-wide alternatives [Fri Jan 03 14:06:44.684 2025] [ 0.696900] devtmpfs: initialized [Fri Jan 03 14:06:44.699 2025] [ 0.708513] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:06:44.699 2025] [ 0.708540] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:06:44.716 2025] [ 0.713704] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:06:44.716 2025] [ 0.714475] DMI not present or invalid. [Fri Jan 03 14:06:44.716 2025] [ 0.715007] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:06:44.731 2025] [ 0.726412] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:06:44.731 2025] [ 0.726716] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:06:44.731 2025] [ 0.726921] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:06:44.747 2025] [ 0.727013] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:06:44.747 2025] [ 0.727161] audit: type=2000 audit(0.725:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:06:44.762 2025] [ 0.727759] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:06:44.762 2025] [ 0.727763] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:06:44.778 2025] [ 0.727993] ASID allocator initialised with 65536 entries [Fri Jan 03 14:06:44.778 2025] [ 0.742988] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:06:44.794 2025] [ 0.752104] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:06:44.794 2025] [ 0.752115] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:06:44.794 2025] [ 0.752119] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:06:44.809 2025] [ 0.752122] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:06:44.816 2025] [ 0.752126] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:06:44.825 2025] [ 0.752128] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:06:44.825 2025] [ 0.752132] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:06:44.825 2025] [ 0.752135] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:06:44.841 2025] [ 0.753402] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:06:44.841 2025] [ 0.753878] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:06:44.857 2025] [ 0.753886] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:06:44.857 2025] [ 0.753899] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:06:44.872 2025] [ 0.753915] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:06:44.872 2025] [ 0.753926] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:06:44.888 2025] [ 0.753931] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:06:44.888 2025] [ 0.754158] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:06:44.903 2025] [ 0.754163] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:06:44.903 2025] [ 0.754172] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:06:44.919 2025] [ 0.754184] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:06:44.919 2025] [ 0.754192] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:06:44.935 2025] [ 0.754196] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:06:44.935 2025] [ 0.754433] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:06:44.951 2025] [ 0.754438] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:06:44.951 2025] [ 0.754452] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:06:44.966 2025] [ 0.754464] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:06:44.966 2025] [ 0.754473] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:06:44.982 2025] [ 0.754476] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:06:44.982 2025] [ 1.013[630] printk: console [ttyS2] printing thread started [Fri Jan 03 14:06:44.998 2025] 0.754705] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:06:44.998 2025] [ 1.013644] printk: console [ttyS2] enabled [Fri Jan 03 14:06:44.998 2025] [ 1.013648] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:06:45.016 2025] [ 1.026231] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:06:45.016 2025] [ 1.027435] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:06:45.016 2025] [ 1.027445] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:06:45.029 2025] [ 1.027458] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:06:45.029 2025] [ 1.027476] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:06:45.045 2025] [ 1.027488] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.061 2025] [ 1.027493] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:06:45.061 2025] [ 1.027524] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:06:45.076 2025] [ 1.028462] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:06:45.076 2025] [ 1.028470] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:06:45.076 2025] [ 1.028487] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:06:45.092 2025] [ 1.028501] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:06:45.092 2025] [ 1.028512] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.108 2025] [ 1.028516] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:06:45.124 2025] [ 1.031471] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:06:45.124 2025] [ 1.037938] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:06:45.124 2025] [ 1.044362] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:06:45.139 2025] [ 1.044832] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:06:45.139 2025] [ 1.044842] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:06:45.139 2025] [ 1.044855] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:06:45.155 2025] [ 1.044871] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:06:45.170 2025] [ 1.044886] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.170 2025] [ 1.044891] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:06:45.186 2025] [ 1.078407] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:06:45.186 2025] [ 1.078694] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:06:45.202 2025] [ 1.079508] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:06:45.202 2025] [ 1.079515] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:06:45.202 2025] [ 1.079552] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:06:45.218 2025] [ 1.079581] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:06:45.233 2025] [ 1.079596] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.233 2025] [ 1.079601] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:06:45.249 2025] [ 1.080343] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:06:45.249 2025] [ 1.080415] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:06:45.265 2025] [ 1.080654] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:06:45.265 2025] [ 1.080667] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:06:45.280 2025] [ 1.080673] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:06:45.280 2025] [ 1.081506] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:06:45.296 2025] [ 1.097926] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:06:45.296 2025] [ 1.102702] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:06:45.312 2025] [ 1.102717] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:06:45.317 2025] [ 1.102738] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:06:45.328 2025] [ 1.102761] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:06:45.328 2025] [ 1.102772] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.343 2025] [ 1.102776] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:06:45.343 2025] [ 1.102783] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:06:45.359 2025] [ 1.103873] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:06:45.359 2025] [ 1.103892] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:06:45.375 2025] [ 1.103907] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:06:45.375 2025] [ 1.103931] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:06:45.390 2025] [ 1.103941] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.390 2025] [ 1.103947] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:06:45.406 2025] [ 1.103955] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:06:45.406 2025] [ 1.103959] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:06:45.417 2025] [ 1.103967] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:06:45.422 2025] [ 1.103979] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:06:45.422 2025] [ 1.103988] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.438 2025] [ 1.103992] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:06:45.438 2025] [ 1.104123] mmc0: CQHCI version 5.10 [Fri Jan 03 14:06:45.453 2025] [ 1.104695] mmc1: CQHCI version 5.10 [Fri Jan 03 14:06:45.453 2025] [ 1.104958] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:06:45.453 2025] [ 1.104971] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:06:45.469 2025] [ 1.104992] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:06:45.469 2025] [ 1.105017] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:06:45.485 2025] [ 1.105027] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.485 2025] [ 1.105033] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:06:45.501 2025] [ 1.105561] mmc2: CQHCI version 5.10 [Fri Jan 03 14:06:45.501 2025] [ 1.107428] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:06:45.501 2025] [ 1.109921] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:06:45.517 2025] [ 1.112902] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:06:45.517 2025] [ 1.113099] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:06:45.533 2025] [ 1.113186] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:06:45.533 2025] [ 1.116320] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:06:45.548 2025] [ 1.116559] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:06:45.548 2025] [ 1.116628] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:06:45.564 2025] [ 1.118261] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:06:45.564 2025] [ 1.118269] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:06:45.564 2025] [ 1.118291] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:06:45.580 2025] [ 1.118307] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:06:45.580 2025] [ 1.118324] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:06:45.600 2025] [ 1.118328] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:06:45.607 2025] [ 1.118336] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:06:45.616 2025] [ 1.118348] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:06:45.625 2025] [ 1.118357] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:06:45.633 2025] [ 1.118361] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:06:45.639 2025] [ 1.118850] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:06:45.645 2025] [ 1.118855] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:06:45.651 2025] [ 1.118869] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:06:45.661 2025] [ 1.118880] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:06:45.667 2025] [ 1.118884] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:06:45.673 2025] [ 1.119411] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:06:45.681 2025] [ 1.119424] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:06:45.688 2025] [ 1.119428] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:06:45.693 2025] [ 1.119521] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:06:45.701 2025] [ 1.119533] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:06:45.711 2025] [ 1.119536] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:06:45.713 2025] [ 1.119596] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:06:45.721 2025] [ 1.119607] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:45.727 2025] [ 1.119610] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:06:45.736 2025] [ 1.120276] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:06:45.740 2025] [ 1.123102] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:06:45.747 2025] [ 1.135785] ALSA device list: [Fri Jan 03 14:06:45.752 2025] [ 1.135796] No soundcards found. [Fri Jan 03 14:06:45.757 2025] [ 1.139270] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:06:45.762 2025] [ 1.148368] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:06:45.772 2025] [ 1.151784] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:06:45.776 2025] [ 1.151944] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:06:45.784 2025] [ 1.197987] mmc1: new MMC card at address 0001 [Fri Jan 03 14:06:45.789 2025] [ 1.198804] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:06:45.795 2025] [ 1.207192] mmcblk1: p1 [Fri Jan 03 14:06:45.799 2025] [ 1.208191] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:06:45.804 2025] [ 1.210113] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:06:45.808 2025] [ 1.211512] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:06:45.814 2025] [ 1.260566] mmc0: Command Queue Engine enabled [Fri Jan 03 14:06:45.819 2025] [ 1.260585] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:06:45.824 2025] [ 1.261468] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:06:45.829 2025] [ 1.265683] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:06:45.834 2025] [ 1.266837] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:06:45.838 2025] [ 1.268140] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:06:45.843 2025] [ 1.269261] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:06:45.848 2025] [ 1.291965] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:06:45.854 2025] [ 1.292431] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:45.859 2025] [ 1.292512] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:06:45.865 2025] [ 1.292721] devtmpfs: mounted [Fri Jan 03 14:06:45.870 2025] [ 1.294125] Freeing unused kernel memory: 1856K [Fri Jan 03 14:06:45.875 2025] [ 1.301483] Run /sbin/init as init process [Fri Jan 03 14:06:45.880 2025] [ 1.301487] with arguments: [Fri Jan 03 14:06:45.884 2025] [ 1.301488] /sbin/init [Fri Jan 03 14:06:45.888 2025] [ 1.301490] with environment: [Fri Jan 03 14:06:45.889 2025] [ 1.301492] HOME=/ [Fri Jan 03 14:06:45.893 2025] [ 1.301494] TERM=linux [Fri Jan 03 14:06:45.893 2025] [ 1.301495] syntec_extend= [Fri Jan 03 14:06:45.898 2025] [ 1.392864] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:06:45.903 2025] [ 1.414802] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:06:45.908 2025] [ 1.416063] Segment Routing with IPv6 [Fri Jan 03 14:06:45.912 2025] [ 1.416096] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:06:45.916 2025] [ 1.471617] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:06:45.944 2025] [ 1.472173] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:06:45.950 2025] [ 1.475484] systemd[1]: Hostname set to . [Fri Jan 03 14:06:45.956 2025] [ 1.601607] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:06:45.978 2025] [ 1.908255] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:06:45.997 2025] [ 1.911053] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:06:46.014 2025] [ 1.972820] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:06:46.021 2025] [ 1.976176] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:06:46.026 2025] [ 1.977713] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:06:46.033 2025] [ 1.978208] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:06:46.040 2025] [ 1.978607] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:06:46.047 2025] [ 1.978838] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:06:46.054 2025] [ 1.979235] systemd[1]: Reached target Path Units. [Fri Jan 03 14:06:46.061 2025] [ 1.979343] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:06:46.068 2025] [ 1.979445] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:06:46.074 2025] [ 1.979522] systemd[1]: Reached target Swaps. [Fri Jan 03 14:06:46.078 2025] [ 1.983768] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:06:46.084 2025] [ 1.983935] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:06:46.089 2025] [ 1.990039] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:06:46.094 2025] [ 1.990524] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:06:46.101 2025] [ 1.991364] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:06:46.106 2025] [ 1.991969] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:06:46.111 2025] [ 1.992553] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:06:46.117 2025] [ 1.993307] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:06:46.121 2025] [ 1.995128] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:06:46.128 2025] [ 1.995673] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:06:46.135 2025] [ 1.996216] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:06:46.140 2025] [ 2.036189] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:06:46.152 2025] [ 2.040244] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:06:46.161 2025] [ 2.044648] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:06:46.168 2025] [ 2.045455] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:06:46.187 2025] [ 2.046790] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:06:46.201 2025] [ 2.050944] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:06:46.208 2025] [ 2.056591] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:06:46.214 2025] [ 2.061648] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:06:46.221 2025] [ 2.071349] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:06:46.227 2025] [ 2.076188] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:06:46.232 2025] [ 2.082579] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:06:46.237 2025] [ 2.083010] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:06:46.249 2025] [ 2.084289] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:06:46.261 2025] [ 2.084311] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:06:46.269 2025] [ 2.088243] systemd[1]: Starting Journal Service... [Fri Jan 03 14:06:46.275 2025] [ 2.089338] fuse: init (API version 7.37) [Fri Jan 03 14:06:46.280 2025] [ 2.096110] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:06:46.286 2025] [ 2.101253] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:06:46.292 2025] [ 2.106432] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:06:46.299 2025] [ 2.111602] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:06:46.305 2025] [ 2.116372] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:06:46.310 2025] [ 2.134510] systemd[1]: Started RPC Bind. [Fri Jan 03 14:06:46.316 2025] [ 2.136561] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:06:46.321 2025] [ 2.143613] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:06:46.326 2025] [ 2.144771] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:06:46.331 2025] [ 2.148845] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:06:46.337 2025] [ 2.150449] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:06:46.343 2025] [ 2.153178] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:06:46.349 2025] [ 2.156129] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:06:46.355 2025] [ 2.158139] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:06:46.362 2025] [ 2.159491] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:06:46.369 2025] [ 2.161991] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:06:46.375 2025] [ 2.164518] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:06:46.381 2025] [ 2.166334] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:06:46.387 2025] [ 2.171530] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:06:46.393 2025] [ 2.175888] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:06:46.400 2025] [ 2.181960] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:06:46.405 2025] [ 2.191457] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:06:46.410 2025] [ 2.195852] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:06:46.416 2025] [ 2.202561] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:06:46.421 2025] [ 2.204213] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:06:46.427 2025] [ 2.206127] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:06:46.433 2025] [ 2.209947] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:06:46.447 2025] [ 2.210285] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:06:46.468 2025] [ 2.215726] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:06:46.478 2025] [ 2.216240] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:06:46.490 2025] [ 2.225345] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:06:46.493 2025] [ 2.234302] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:06:46.503 2025] [ 2.238752] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:06:46.508 2025] [ 2.266758] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:06:46.514 2025] [ 2.289450] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 14:06:46.521 2025] [ 2.290075] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 14:06:46.527 2025] [ 2.306200] systemd[1]: Mounting /media/ram... [Fri Jan 03 14:06:46.535 2025] [ 2.311586] systemd[1]: Mounting /var/volatile... [Fri Jan 03 14:06:46.540 2025] [ 2.316228] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 14:06:46.545 2025] [ 2.317908] systemd[1]: Started Journal Service. [Fri Jan 03 14:06:46.552 2025] [ 2.381274] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:06:46.689 2025] [ 2.708446] random: crng init done [Fri Jan 03 14:06:46.806 2025] [ 2.825602] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:06:46.822 2025] [ 2.825623] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:06:46.833 2025] [ 2.825653] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:06:46.857 2025] [ 2.825696] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:06:46.871 2025] [ 2.825723] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:06:46.878 2025] [ 2.831867] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:06:46.886 2025] [ 2.831885] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:06:46.907 2025] [ 2.831922] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:06:46.947 2025] [ 2.831948] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:06:46.956 2025] [ 2.831960] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:06:46.971 2025] [ 2.831967] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:06:46.978 2025] [ 2.831979] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:06:46.993 2025] [ 2.832193] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:06:47.000 2025] [ 2.832203] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:06:47.016 2025] [ 2.832207] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:06:47.023 2025] [ 2.832221] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:06:47.035 2025] [ 2.832234] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:06:47.065 2025] [ 2.860803] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:06:47.074 2025] [ 2.860821] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:06:47.083 2025] [ 2.860858] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:06:47.091 2025] [ 2.860862] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:06:47.099 2025] [ 2.860893] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:47.110 2025] [ 2.927359] mc: Linux media interface: v0.10 [Fri Jan 03 14:06:47.112 2025] [ 2.952910] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:06:47.119 2025] [ 2.955231] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:06:47.126 2025] [ 2.956380] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:37:04 UTC (1681065424) [Fri Jan 03 14:06:47.140 2025] [ 2.956533] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:06:47.163 2025] [ 2.956550] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:06:47.177 2025] [ 2.964504] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:06:47.200 2025] [ 2.964539] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:06:47.213 2025] [ 3.071202] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:06:47.223 2025] [ 3.073066] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:06:47.225 2025] [ 3.073502] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:06:47.234 2025] [ 3.074741] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:06:47.240 2025] [ 3.076338] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:06:47.248 2025] [ 3.076377] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:06:47.254 2025] [ 3.076476] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:06:47.263 2025] [ 3.076487] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:06:47.273 2025] [ 3.239771] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:06:47.279 2025] [ 3.288263] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:06:47.285 2025] [ 3.288301] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:06:47.291 2025] [ 3.288308] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:06:47.298 2025] [ 3.288330] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:06:47.307 2025] [ 3.288364] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:06:47.320 2025] [ 3.288382] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:06:47.327 2025] [ 3.288647] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:06:47.333 2025] [ 3.324357] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:06:47.348 2025] [ 3.324527] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:06:47.351 2025] [ 3.324685] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:06:47.359 2025] [ 3.325696] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:06:47.365 2025] [ 3.325775] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:06:47.373 2025] [ 3.341247] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:06:47.385 2025] [ 3.341293] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:06:47.406 2025] [ 3.427165] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:06:47.418 2025] [ 3.427239] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:06:47.426 2025] [ 3.427248] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:06:47.448 2025] [ 3.428229] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:06:47.458 2025] [ 3.440428] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:06:47.463 2025] [ 3.442111] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:06:47.478 2025] [ 3.442150] Get kick_gpio number= (418) [Fri Jan 03 14:06:47.492 2025] [ 3.446802] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:06:48.408 2025] [ 4.427728] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:06:48.417 2025] [ 4.435887] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:06:48.444 2025] [ 4.457121] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:06:48.482 2025] [ 4.457145] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:06:48.509 2025] [ 4.457161] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:06:48.572 2025] [ 4.457193] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:06:48.656 2025] [ 4.457213] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:06:48.674 2025] [ 4.457219] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:06:48.683 2025] [ 4.480545] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:06:48.686 2025] [ 4.494700] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:06:48.745 2025] [ 4.559433] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:06:48.766 2025] [ 4.561015] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:06:48.794 2025] [ 4.561045] cfg80211: failed to load regulatory.db [Fri Jan 03 14:06:48.802 2025] [ 4.733175] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:06:48.812 2025] [ 4.755291] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:06:48.829 2025] [ 4.755332] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:06:48.837 2025] [ 4.785755] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:06:48.843 2025] [ 4.785817] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:06:48.861 2025] [ 4.786062] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:06:48.869 2025] [ 4.786071] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:06:48.882 2025] [ 4.800284] xhci-hcd xhci-hcd.4.auto: irq 472, io mem 0x31100000 [Fri Jan 03 14:06:48.885 2025] [ 4.805505] hub 1-0:1.0: USB hub found [Fri Jan 03 14:06:48.890 2025] [ 4.806107] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:06:49.032 2025] [ 5.051497] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:06:49.200 2025] [ 5.219463] hub 1-1:1.0: USB hub found [Fri Jan 03 14:06:49.204 2025] [ 5.220369] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:06:49.303 2025] [ 5.321894] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:06:49.310 2025] [ 5.321938] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:49.372 2025] [ 5.391717] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:06:49.376 2025] [ 5.391762] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:49.522 2025] [ 5.541615] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:06:49.541 2025] [ 5.561041] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:06:49.549 2025] [ 5.561084] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:49.610 2025] [ 5.629885] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:06:49.618 2025] [ 5.635373] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:49.694 2025] [ 5.713497] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:06:49.745 2025] [ 5.763730] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:06:49.752 2025] [ 5.763768] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:06:50.239 2025] [ 6.259118] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:06:50.243 2025] [ 6.262064] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:06:50.316 2025] *************************************************************** [Fri Jan 03 14:06:50.320 2025] *************************************************************** [Fri Jan 03 14:06:50.325 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:06:50.330 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:06:50.335 2025] bash [Fri Jan 03 14:06:50.336 2025] cifs-utils [Fri Jan 03 14:06:50.336 2025] dosfstools [Fri Jan 03 14:06:50.339 2025] grub-common [Fri Jan 03 14:06:50.344 2025] grub-editenv [Fri Jan 03 14:06:50.344 2025] grub-efi [Fri Jan 03 14:06:50.344 2025] less [Fri Jan 03 14:06:50.344 2025] lib32-libgcc1 [Fri Jan 03 14:06:50.350 2025] lib32-libstdc++6 [Fri Jan 03 14:06:50.350 2025] libdw1 [Fri Jan 03 14:06:50.350 2025] libelf1 [Fri Jan 03 14:06:50.350 2025] libgcc1 [Fri Jan 03 14:06:50.355 2025] libgdbm-compat4 [Fri Jan 03 14:06:50.355 2025] libgdbm6 [Fri Jan 03 14:06:50.355 2025] libgmp10 [Fri Jan 03 14:06:50.355 2025] libidn2-0 [Fri Jan 03 14:06:50.355 2025] libreadline8 [Fri Jan 03 14:06:50.355 2025] libstdc++6 [Fri Jan 03 14:06:50.359 2025] libunistring2 [Fri Jan 03 14:06:50.359 2025] libvte-2.91-0 [Fri Jan 03 14:06:50.359 2025] nettle [Fri Jan 03 14:06:50.364 2025] onboard [Fri Jan 03 14:06:50.364 2025] parted [Fri Jan 03 14:06:50.364 2025] rxvt-unicode [Fri Jan 03 14:06:50.364 2025] [Fri Jan 03 14:06:50.364 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:06:50.369 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:06:50.374 2025] the opkg remove command. i.e.: [Fri Jan 03 14:06:50.375 2025] opkg remove [Fri Jan 03 14:06:50.380 2025] Where is the name printed in the list above [Fri Jan 03 14:06:50.385 2025] [Fri Jan 03 14:06:50.386 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:06:50.390 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:06:50.395 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:06:50.401 2025] also remove the dependent packages as well [Fri Jan 03 14:06:50.406 2025] *************************************************************** [Fri Jan 03 14:06:50.411 2025] *************************************************************** [Fri Jan 03 14:06:55.424 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:06:55.434 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:06:55.617 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:06:55.617 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:06:55.775 2025] [Fri Jan 03 14:06:55.790 2025] _____ _____ _ _ [Fri Jan 03 14:06:55.790 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:06:55.790 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:06:55.790 2025] |__|__|_| |__,|[ 11.825881] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:55.806 2025] _ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:06:55.806 2025] |___| [ 11.825905] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:55.822 2025] |___| [Fri Jan 03 14:06:55.822 2025] [Fri Jan 03 14:06:55.822 2025] Arago Project am62xx-evm [ 11.825929] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.822 2025] - [Fri Jan 03 14:06:55.837 2025] [Fri Jan 03 14:06:55.837 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:06:55.841 2025] [Fri Jan 03 14:06:55.841 2025] am62xx-evm login: [ 11.825982] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:55.841 2025] [ 11.825987] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:55.853 2025] [ 11.825996] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.853 2025] [ 11.826030] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:55.853 2025] [ 11.826036] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:55.869 2025] [ 11.826045] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.869 2025] [ 11.826083] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:55.869 2025] [ 11.826088] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:55.884 2025] [ 11.826095] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.884 2025] [ 11.826128] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:55.900 2025] [ 11.826133] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:55.900 2025] [ 11.826143] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.900 2025] [ 11.826177] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:55.916 2025] [ 11.826182] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:55.916 2025] [ 11.826189] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.931 2025] [ 11.826228] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:55.931 2025] [ 11.826233] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:55.942 2025] [ 11.826241] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:55.947 2025] [ 11.826276] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:55.947 2025] [ 11.826283] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:55.963 2025] [ 11.826290] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.120 2025] [ 14.137128] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:06:58.123 2025] [ 14.137155] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:06:58.129 2025] [ 14.137171] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.135 2025] [ 14.137220] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:06:58.141 2025] [ 14.137226] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:06:58.146 2025] [ 14.137232] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.153 2025] [ 14.137266] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:06:58.159 2025] [ 14.137272] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:06:58.165 2025] [ 14.137283] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.171 2025] [ 14.137317] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:06:58.176 2025] [ 14.137322] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:06:58.183 2025] [ 14.137330] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.192 2025] [ 14.137366] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:06:58.199 2025] [ 14.137371] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:06:58.202 2025] [ 14.137378] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.208 2025] [ 14.137659] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:06:58.214 2025] [ 14.137668] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:06:58.220 2025] [ 14.137677] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.225 2025] [ 14.137712] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:06:58.231 2025] [ 14.137719] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:06:58.237 2025] [ 14.137727] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.244 2025] [ 14.137762] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:06:58.254 2025] [ 14.137767] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:06:58.256 2025] [ 14.137776] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:06:58.615 2025] [ 14.633601] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:07:01.910 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:07:01.916 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:07:03.723 2025] [ 19.742040] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:03.727 2025] [ 19.742065] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:03.734 2025] [ 19.742090] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.740 2025] [ 19.742143] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:03.746 2025] [ 19.742148] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:03.751 2025] [ 19.742158] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.757 2025] [ 19.742194] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:03.764 2025] [ 19.742199] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:03.770 2025] [ 19.742206] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.780 2025] [ 19.742244] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:03.783 2025] [ 19.742249] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:03.789 2025] [ 19.742256] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.795 2025] [ 19.742291] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:03.800 2025] [ 19.742298] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:03.806 2025] [ 19.742305] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.813 2025] [ 19.742339] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:03.819 2025] [ 19.742344] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:03.825 2025] [ 19.742351] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.832 2025] [ 19.742472] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:03.838 2025] [ 19.742479] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:03.844 2025] [ 19.742489] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.850 2025] [ 19.742534] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:03.860 2025] [ 19.742540] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:03.863 2025] [ 19.742547] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.869 2025] [ 19.817685] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:03.875 2025] [ 19.817709] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:03.881 2025] [ 19.817737] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.887 2025] [ 19.817800] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:03.894 2025] [ 19.817806] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:03.899 2025] [ 19.817813] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.905 2025] [ 19.817849] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:03.911 2025] [ 19.817854] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:03.918 2025] [ 19.817861] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.924 2025] [ 19.817899] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:03.930 2025] [ 19.817904] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:03.936 2025] [ 19.817911] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.942 2025] [ 19.817948] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:03.952 2025] [ 19.817953] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:03.958 2025] [ 19.817960] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.961 2025] [ 19.817993] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:03.967 2025] [ 19.817998] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:03.973 2025] [ 19.818005] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:03.980 2025] [ 19.818039] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:03.986 2025] [ 19.818044] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:03.992 2025] [ 19.818052] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:04.002 2025] [ 19.818088] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:04.008 2025] [ 19.818094] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:04.011 2025] [ 19.818101] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:36.515 2025] [Fri Jan 03 14:07:36.515 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:07:36.530 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:07:36.593 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:07:36.609 2025] Trying to boot from MMC1 [Fri Jan 03 14:07:36.782 2025] Authentication passed [Fri Jan 03 14:07:36.782 2025] Authentication passed [Fri Jan 03 14:07:36.798 2025] Authentication passed [Fri Jan 03 14:07:36.829 2025] Authentication passed [Fri Jan 03 14:07:36.829 2025] Authentication passed [Fri Jan 03 14:07:36.844 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:07:36.844 2025] [Fri Jan 03 14:07:36.844 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:07:36.844 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:07:37.144 2025] [Fri Jan 03 14:07:37.144 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:07:37.159 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:07:37.191 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:07:37.191 2025] Error: could not access storage. [Fri Jan 03 14:07:37.207 2025] Trying to boot from MMC1 [Fri Jan 03 14:07:37.364 2025] Authentication passed [Fri Jan 03 14:07:37.364 2025] Authentication passed [Fri Jan 03 14:07:38.022 2025] [Fri Jan 03 14:07:38.022 2025] [Fri Jan 03 14:07:38.022 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:07:38.022 2025] [Fri Jan 03 14:07:38.022 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:07:38.022 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:07:38.038 2025] DRAM: 2 GiB [Fri Jan 03 14:07:38.273 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:07:38.284 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:07:38.290 2025] Loading Environment from MMC... OK [Fri Jan 03 14:07:38.494 2025] In: serial [Fri Jan 03 14:07:38.494 2025] Out: serial [Fri Jan 03 14:07:38.494 2025] Err: serial [Fri Jan 03 14:07:38.494 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:07:38.494 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:07:38.651 2025] switch to partitions #0, OK [Fri Jan 03 14:07:38.666 2025] mmc0(part 0) is current device [Fri Jan 03 14:07:38.809 2025] SD/MMC found on device 0 [Fri Jan 03 14:07:38.809 2025] Running eMMC boot ... [Fri Jan 03 14:07:38.824 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:07:38.824 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:07:38.840 2025] Importing environment from mmc0 ... [Fri Jan 03 14:07:39.060 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:07:39.085 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:07:39.085 2025] Working FDT set to 88000000 [Fri Jan 03 14:07:39.092 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:07:39.092 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:07:39.092 2025] Working FDT set to 88000000 [Fri Jan 03 14:07:39.123 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:07:39.123 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:07:39.139 2025] Working FDT set to 8feed000 [Fri Jan 03 14:07:39.139 2025] [Fri Jan 03 14:07:39.139 2025] Starting kernel ... [Fri Jan 03 14:07:39.154 2025] [Fri Jan 03 14:07:39.185 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:07:39.185 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:07:39.201 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:07:39.217 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:07:39.295 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:07:39.311 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:07:39.311 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:07:39.311 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:07:39.327 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:07:39.327 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:07:39.342 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:07:39.358 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:07:39.358 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:07:39.373 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:07:39.386 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:07:39.390 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:07:39.390 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:07:39.405 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:07:39.421 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:07:39.421 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:07:39.421 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:07:39.436 2025] [ 0.000000] Normal empty [Fri Jan 03 14:07:39.436 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:07:39.436 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:07:39.436 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:07:39.452 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:07:39.452 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:07:39.452 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:07:39.468 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:07:39.468 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:07:39.468 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:07:39.486 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:07:39.486 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:07:39.499 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:07:39.499 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:07:39.499 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:07:39.515 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:07:39.515 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:07:39.515 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:07:39.531 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:07:39.531 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:07:39.531 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:07:39.546 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:07:39.546 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:07:39.562 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:07:39.562 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:07:39.562 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:07:39.621 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:07:39.630 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:07:39.638 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:07:39.646 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:07:39.653 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:07:39.670 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:07:39.676 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:07:39.681 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:07:39.687 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:07:39.693 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:07:39.699 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:07:39.707 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:07:39.714 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:07:39.720 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:07:39.726 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:07:39.734 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:07:39.734 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:07:39.739 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:07:39.746 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:07:39.753 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:07:39.757 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:07:39.763 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:07:39.768 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:07:39.777 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:07:39.784 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:07:39.788 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:07:39.794 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:07:39.801 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:07:39.808 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:07:39.814 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:07:39.828 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:07:39.833 2025] [ 0.000250] Console: colour dummy device 80x25 [Fri Jan 03 14:07:39.842 2025] [ 0.528876] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:07:39.851 2025] [ 0.528886] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:07:39.856 2025] [ 0.528970] LSM: Security Framework initializing [Fri Jan 03 14:07:39.861 2025] [ 0.529103] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:07:39.868 2025] [ 0.529127] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:07:39.876 2025] [ 0.530836] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:07:39.881 2025] [ 0.530844] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:07:39.886 2025] [ 0.530888] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:07:39.896 2025] [ 0.583348] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:07:39.899 2025] [ 0.583599] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:07:39.909 2025] [ 0.583686] EFI services will not be available. [Fri Jan 03 14:07:39.916 2025] [ 0.583948] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:07:39.923 2025] [ 0.584726] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:07:39.923 2025] [ 0.584839] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:07:39.931 2025] [ 0.584856] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:07:39.937 2025] [ 0.584910] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:07:39.948 2025] [ 0.634990] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:07:39.949 2025] [ 0.635076] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:07:39.956 2025] [ 0.635088] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:07:39.963 2025] [ 0.635122] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:07:39.975 2025] [ 0.661005] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:07:39.976 2025] [ 0.661085] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:07:39.982 2025] [ 0.661097] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:07:39.989 2025] [ 0.661127] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:07:39.995 2025] [ 0.661184] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:07:40.000 2025] [ 0.661190] SMP: Total of 4 processors activated. [Fri Jan 03 14:07:40.007 2025] [ 0.695378] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:07:40.012 2025] [ 0.695382] CPU features: detected: CRC32 instructions [Fri Jan 03 14:07:40.019 2025] [ 0.695429] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:07:40.023 2025] [ 0.695431] alternatives: applying system-wide alternatives [Fri Jan 03 14:07:40.028 2025] [ 0.696952] devtmpfs: initialized [Fri Jan 03 14:07:40.034 2025] [ 0.708561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:07:40.040 2025] [ 0.708589] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:07:40.046 2025] [ 0.713770] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:07:40.052 2025] [ 0.714584] DMI not present or invalid. [Fri Jan 03 14:07:40.057 2025] [ 0.715115] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:07:40.062 2025] [ 0.729157] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:07:40.069 2025] [ 0.729435] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:07:40.076 2025] [ 0.729625] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:07:40.084 2025] [ 0.729767] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:07:40.093 2025] [ 0.729965] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:07:40.098 2025] [ 0.730606] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:07:40.109 2025] [ 0.730611] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:07:40.111 2025] [ 0.730856] ASID allocator initialised with 65536 entries [Fri Jan 03 14:07:40.117 2025] [ 0.745775] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:07:40.123 2025] [ 0.754941] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:07:40.130 2025] [ 0.754952] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:07:40.137 2025] [ 0.754956] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:07:40.144 2025] [ 0.754959] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:07:40.150 2025] [ 0.754963] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:07:40.156 2025] [ 0.754965] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:07:40.164 2025] [ 0.754969] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:07:40.171 2025] [ 0.754972] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:07:40.177 2025] [ 0.756147] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:07:40.186 2025] [ 0.756690] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:07:40.192 2025] [ 0.756699] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:07:40.200 2025] [ 0.756713] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:07:40.208 2025] [ 0.756728] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:07:40.217 2025] [ 0.756739] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.224 2025] [ 0.756746] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:07:40.231 2025] [ 0.756975] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:07:40.238 2025] [ 0.756981] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:07:40.245 2025] [ 0.756990] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:07:40.254 2025] [ 0.757003] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:07:40.263 2025] [ 0.757011] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.270 2025] [ 0.757015] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:07:40.277 2025] [ 0.757242] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:07:40.284 2025] [ 0.757247] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:07:40.291 2025] [ 0.757257] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:07:40.299 2025] [ 0.757269] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:07:40.311 2025] [ 0.757277] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.315 2025] [ 1[.006697] printk: console [ttyS2] printing thread started [Fri Jan 03 14:07:40.322 2025] 0.757281] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:07:40.329 2025] [ 1.006701] printk: console [ttyS2] enabled [Fri Jan 03 14:07:40.335 2025] [ 1.006705] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:07:40.340 2025] [ 1.019111] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:07:40.345 2025] [ 1.024515] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:07:40.354 2025] [ 1.024524] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:07:40.357 2025] [ 1.024537] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:07:40.372 2025] [ 1.024555] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:07:40.379 2025] [ 1.024566] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.386 2025] [ 1.024571] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:07:40.392 2025] [ 1.024602] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:07:40.401 2025] [ 1.025541] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:07:40.407 2025] [ 1.025550] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:07:40.413 2025] [ 1.025562] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:07:40.421 2025] [ 1.025578] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:07:40.431 2025] [ 1.025587] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.437 2025] [ 1.025592] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:07:40.443 2025] [ 1.028539] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:07:40.451 2025] [ 1.037765] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:07:40.457 2025] [ 1.044786] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:07:40.463 2025] [ 1.045220] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:07:40.470 2025] [ 1.045226] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:07:40.475 2025] [ 1.045246] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:07:40.486 2025] [ 1.045264] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:07:40.497 2025] [ 1.045278] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.504 2025] [ 1.045283] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:07:40.510 2025] [ 1.079155] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:07:40.517 2025] [ 1.079440] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:07:40.524 2025] [ 1.080245] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:07:40.530 2025] [ 1.080254] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:07:40.538 2025] [ 1.080266] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:07:40.549 2025] [ 1.080289] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:07:40.561 2025] [ 1.080308] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.568 2025] [ 1.080312] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:07:40.574 2025] [ 1.081042] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:07:40.582 2025] [ 1.081086] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:07:40.595 2025] [ 1.081344] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:07:40.601 2025] [ 1.081356] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:07:40.613 2025] [ 1.081361] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:07:40.614 2025] [ 1.082144] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:07:40.623 2025] [ 1.104022] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:07:40.631 2025] [ 1.108918] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:07:40.639 2025] [ 1.108959] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:07:40.645 2025] [ 1.108959] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:07:40.651 2025] [ 1.108966] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:07:40.658 2025] [ 1.108966] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:07:40.665 2025] [ 1.108979] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:07:40.674 2025] [ 1.108979] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:07:40.684 2025] [ 1.109001] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:07:40.693 2025] [ 1.109002] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:07:40.706 2025] [ 1.109013] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.709 2025] [ 1.109013] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.716 2025] [ 1.109017] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:07:40.722 2025] [ 1.109018] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:07:40.728 2025] [ 1.109023] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:07:40.735 2025] [ 1.109027] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:07:40.741 2025] [ 1.109035] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:07:40.751 2025] [ 1.109052] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:07:40.759 2025] [ 1.109060] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.766 2025] [ 1.109063] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:07:40.774 2025] [ 1.110185] mmc1: CQHCI version 5.10 [Fri Jan 03 14:07:40.779 2025] [ 1.110704] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:07:40.784 2025] [ 1.110715] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:07:40.794 2025] [ 1.110728] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:07:40.799 2025] [ 1.110748] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:07:40.808 2025] [ 1.110760] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.815 2025] [ 1.110764] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:07:40.821 2025] [ 1.111191] mmc0: CQHCI version 5.10 [Fri Jan 03 14:07:40.826 2025] [ 1.111190] mmc2: CQHCI version 5.10 [Fri Jan 03 14:07:40.832 2025] [ 1.112249] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:07:40.837 2025] [ 1.114873] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:07:40.846 2025] [ 1.117943] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:07:40.852 2025] [ 1.118159] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:07:40.862 2025] [ 1.118231] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:07:40.868 2025] [ 1.121278] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:07:40.877 2025] [ 1.121483] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:07:40.880 2025] [ 1.121553] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:07:40.887 2025] [ 1.123248] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:07:40.894 2025] [ 1.123258] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:07:40.905 2025] [ 1.123279] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:07:40.910 2025] [ 1.123300] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:07:40.916 2025] [ 1.123311] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:07:40.923 2025] [ 1.123315] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:07:40.932 2025] [ 1.123324] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:07:40.939 2025] [ 1.123335] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:07:40.948 2025] [ 1.123344] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:07:40.958 2025] [ 1.123349] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:07:40.961 2025] [ 1.123815] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:07:40.972 2025] [ 1.123821] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:07:40.975 2025] [ 1.123834] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:07:40.983 2025] [ 1.123846] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:07:40.989 2025] [ 1.123851] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:07:40.995 2025] [ 1.124382] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:07:41.004 2025] [ 1.124396] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:07:41.011 2025] [ 1.124399] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:07:41.018 2025] [ 1.124497] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:07:41.024 2025] [ 1.124509] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:07:41.030 2025] [ 1.124512] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:07:41.036 2025] [ 1.124572] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:07:41.048 2025] [ 1.124583] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:41.054 2025] [ 1.124586] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:07:41.056 2025] [ 1.125290] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:07:41.064 2025] [ 1.127862] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:07:41.071 2025] [ 1.139938] ALSA device list: [Fri Jan 03 14:07:41.076 2025] [ 1.139949] No soundcards found. [Fri Jan 03 14:07:41.077 2025] [ 1.148463] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:07:41.086 2025] [ 1.152523] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:07:41.092 2025] [ 1.158031] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:07:41.100 2025] [ 1.167046] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:07:41.112 2025] [ 1.202075] mmc1: new MMC card at address 0001 [Fri Jan 03 14:07:41.113 2025] [ 1.202936] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:07:41.119 2025] [ 1.211541] mmcblk1: p1 [Fri Jan 03 14:07:41.119 2025] [ 1.212361] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:07:41.124 2025] [ 1.214071] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:07:41.129 2025] [ 1.215524] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:07:41.135 2025] [ 1.266077] mmc0: Command Queue Engine enabled [Fri Jan 03 14:07:41.140 2025] [ 1.266100] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:07:41.145 2025] [ 1.266875] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:07:41.151 2025] [ 1.270771] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:07:41.156 2025] [ 1.271914] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:07:41.161 2025] [ 1.273252] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:07:41.167 2025] [ 1.274390] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:07:41.172 2025] [ 1.293560] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:07:41.177 2025] [ 1.293935] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:41.183 2025] [ 1.294010] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:07:41.188 2025] [ 1.294243] devtmpfs: mounted [Fri Jan 03 14:07:41.194 2025] [ 1.295622] Freeing unused kernel memory: 1856K [Fri Jan 03 14:07:41.199 2025] [ 1.295738] Run /sbin/init as init process [Fri Jan 03 14:07:41.203 2025] [ 1.295742] with arguments: [Fri Jan 03 14:07:41.207 2025] [ 1.295743] /sbin/init [Fri Jan 03 14:07:41.212 2025] [ 1.295745] with environment: [Fri Jan 03 14:07:41.217 2025] [ 1.295747] HOME=/ [Fri Jan 03 14:07:41.217 2025] [ 1.295749] TERM=linux [Fri Jan 03 14:07:41.218 2025] [ 1.295750] syntec_extend= [Fri Jan 03 14:07:41.222 2025] [ 1.386857] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:07:41.227 2025] [ 1.428014] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:07:41.237 2025] [ 1.429254] Segment Routing with IPv6 [Fri Jan 03 14:07:41.237 2025] [ 1.429290] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:07:41.241 2025] [ 1.467095] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:07:41.268 2025] [ 1.467699] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:07:41.273 2025] [ 1.470981] systemd[1]: Hostname set to . [Fri Jan 03 14:07:41.278 2025] [ 1.585635] systemd-sysv-generator[182]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:07:41.302 2025] [ 1.895963] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:07:41.320 2025] [ 1.898777] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:07:41.337 2025] [ 1.961787] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:07:41.344 2025] [ 1.965116] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:07:41.350 2025] [ 1.966699] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:07:41.357 2025] [ 1.967216] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:07:41.362 2025] [ 1.967564] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:07:41.369 2025] [ 1.967759] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:07:41.377 2025] [ 1.968226] systemd[1]: Reached target Path Units. [Fri Jan 03 14:07:41.386 2025] [ 1.968333] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:07:41.388 2025] [ 1.968408] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:07:41.393 2025] [ 1.968491] systemd[1]: Reached target Swaps. [Fri Jan 03 14:07:41.399 2025] [ 1.972774] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:07:41.404 2025] [ 1.972940] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:07:41.410 2025] [ 1.978960] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:07:41.416 2025] [ 1.979441] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:07:41.422 2025] [ 1.980264] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:07:41.427 2025] [ 1.980794] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:07:41.433 2025] [ 1.981325] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:07:41.439 2025] [ 1.982065] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:07:41.445 2025] [ 1.983554] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:07:41.450 2025] [ 1.984076] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:07:41.456 2025] [ 1.984592] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:07:41.463 2025] [ 2.036865] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:07:41.468 2025] [ 2.040931] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:07:41.475 2025] [ 2.045362] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:07:41.492 2025] [ 2.046117] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:07:41.508 2025] [ 2.047428] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:07:41.517 2025] [ 2.051536] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:07:41.524 2025] [ 2.057165] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:07:41.527 2025] [ 2.062256] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:07:41.533 2025] [ 2.067815] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:07:41.538 2025] [ 2.075802] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:07:41.544 2025] [ 2.081935] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:07:41.550 2025] [ 2.082510] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:07:41.560 2025] [ 2.083916] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:07:41.573 2025] [ 2.083945] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:07:41.581 2025] [ 2.087614] systemd[1]: Starting Journal Service... [Fri Jan 03 14:07:41.586 2025] [ 2.091884] fuse: init (API version 7.37) [Fri Jan 03 14:07:41.590 2025] [ 2.100315] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:07:41.590 2025] [ 2.105103] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:07:41.602 2025] [ 2.111649] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:07:41.602 2025] [ 2.120327] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:07:41.618 2025] [ 2.136387] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:07:41.618 2025] [ 2.142467] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:07:41.618 2025] [ 2.145246] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:07:41.633 2025] [ 2.155490] systemd[1]: Started RPC Bind. [Fri Jan 03 14:07:41.633 2025] [ 2.162286] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:07:41.633 2025] [ 2.163052] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:07:41.649 2025] [ 2.164795] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:07:41.649 2025] [ 2.173036] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:07:41.649 2025] [ 2.174003] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:07:41.664 2025] [ 2.175586] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:07:41.664 2025] [ 2.178337] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:07:41.664 2025] [ 2.179427] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:07:41.680 2025] [ 2.182571] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:07:41.690 2025] [ 2.183416] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:07:41.696 2025] [ 2.185047] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:07:41.696 2025] [ 2.187365] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:07:41.696 2025] [ 2.191492] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:07:41.712 2025] [ 2.192659] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:07:41.712 2025] [ 2.193774] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:07:41.727 2025] [ 2.235285] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:07:41.727 2025] [ 2.255834] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:07:41.727 2025] [ 2.258760] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:07:41.743 2025] [ 2.259268] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:07:41.759 2025] [ 2.263527] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:07:41.759 2025] [ 2.264026] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:07:41.774 2025] [ 2.270597] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:07:41.790 2025] [ 2.288554] systemd[1]: Started Journal Service. [Fri Jan 03 14:07:41.790 2025] [ 2.356341] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:07:42.026 2025] [ 2.725220] random: crng init done [Fri Jan 03 14:07:42.121 2025] [ 2.825054] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:07:42.137 2025] [ 2.825073] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:07:42.152 2025] [ 2.825088] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:07:42.168 2025] [ 2.835485] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:07:42.183 2025] [ 2.835532] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:07:42.191 2025] [ 2.869077] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:07:42.199 2025] [ 2.869097] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:07:42.199 2025] [ 2.869664] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:07:42.278 2025] [ 2.869724] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:07:42.294 2025] [ 2.869740] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:07:42.294 2025] [ 2.869745] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:07:42.309 2025] [ 2.869764] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:07:42.356 2025] [ 2.870207] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:07:42.356 2025] [ 2.870225] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:07:42.388 2025] [ 2.870229] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:07:42.391 2025] [ 2.870257] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:07:42.404 2025] [ 2.870280] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:07:42.419 2025] [ 2.887988] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:07:42.435 2025] [ 2.888006] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:07:42.451 2025] [ 2.888038] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:07:42.466 2025] [ 2.888040] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:07:42.466 2025] [ 2.888067] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:42.482 2025] [ 2.954048] mc: Linux media interface: v0.10 [Fri Jan 03 14:07:42.482 2025] [ 3.004886] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:07:42.491 2025] [ 3.029534] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:07:42.491 2025] [ 3.030659] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:37:59 UTC (1681065479) [Fri Jan 03 14:07:42.498 2025] [ 3.041285] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:07:42.513 2025] [ 3.041315] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:07:42.529 2025] [ 3.044522] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:07:42.545 2025] [ 3.044554] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:07:42.576 2025] [ 3.088811] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:07:42.607 2025] [ 3.089202] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:07:42.607 2025] [ 3.090229] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:07:42.623 2025] [ 3.110065] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:07:42.638 2025] [ 3.111623] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:07:42.645 2025] [ 3.111669] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:07:42.645 2025] [ 3.111709] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:07:42.692 2025] [ 3.111718] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:07:42.692 2025] [ 3.273699] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:07:42.723 2025] [ 3.286689] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:07:42.723 2025] [ 3.286724] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:07:42.739 2025] [ 3.286730] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:07:42.754 2025] [ 3.286750] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:07:42.754 2025] [ 3.286777] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:07:42.770 2025] [ 3.286793] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:07:42.770 2025] [ 3.286799] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:07:42.786 2025] [ 3.305641] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:07:42.802 2025] [ 3.305805] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:07:42.817 2025] [ 3.305987] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:07:42.817 2025] [ 3.313298] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:07:42.833 2025] [ 3.313410] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:07:42.849 2025] [ 3.313484] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:07:42.849 2025] [ 3.313873] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:07:42.864 2025] [ 3.313896] Get kick_gpio number= (418) [Fri Jan 03 14:07:42.864 2025] [ 3.319840] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:07:42.880 2025] [ 3.319888] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:07:42.880 2025] [ 3.321117] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:07:42.896 2025] [ 3.321197] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:07:42.896 2025] [ 3.321205] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:07:42.896 2025] [ 3.345259] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:07:42.912 2025] [ 3.345479] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:07:43.304 2025] [ 3.996189] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:07:43.304 2025] [ 3.996209] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:07:43.335 2025] [ 3.996231] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:07:43.367 2025] [ 3.996259] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:07:43.430 2025] [ 3.996274] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:07:43.430 2025] [ 3.996280] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:07:43.461 2025] [ 3.996485] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:07:43.477 2025] [ 4.032065] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:07:43.495 2025] [ 4.045461] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:07:43.607 2025] [ 4.296408] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:07:43.682 2025] [ 4.370451] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:07:43.690 2025] [ 4.370514] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:07:43.703 2025] [ 4.370717] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:07:43.724 2025] [ 4.370731] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:07:43.737 2025] [ 4.379861] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:07:43.741 2025] [ 4.381334] hub 1-0:1.0: USB hub found [Fri Jan 03 14:07:43.745 2025] [ 4.381395] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:07:43.751 2025] [ 4.394786] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:07:43.769 2025] [ 4.459205] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:07:43.780 2025] [ 4.459871] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:07:43.793 2025] [ 4.459908] cfg80211: failed to load regulatory.db [Fri Jan 03 14:07:43.933 2025] [ 4.621275] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:07:43.970 2025] [ 4.659866] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:07:43.983 2025] [ 4.659906] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:07:44.107 2025] [ 4.796583] hub 1-1:1.0: USB hub found [Fri Jan 03 14:07:44.114 2025] [ 4.801035] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:07:44.659 2025] [ 5.348610] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:07:44.715 2025] [ 5.404901] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:07:44.727 2025] [ 5.404946] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:07:44.894 2025] [ 5.582870] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:07:44.901 2025] [ 5.582914] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:44.911 2025] [ 5.596824] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:07:44.917 2025] [ 5.596868] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:44.922 2025] [ 5.613679] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:07:44.928 2025] [ 5.613715] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:44.941 2025] [ 5.615095] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:07:45.006 2025] [ 5.694602] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:07:45.013 2025] [ 5.700077] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:45.601 2025] *************************************************************** [Fri Jan 03 14:07:45.601 2025] ***************************************************************[ 6.307397] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:07:45.617 2025] [ 6.308607] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:07:45.617 2025] [Fri Jan 03 14:07:45.617 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:07:45.632 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:07:45.632 2025] bash [Fri Jan 03 14:07:45.632 2025] cifs-utils [Fri Jan 03 14:07:45.632 2025] dosfstools [Fri Jan 03 14:07:45.648 2025] grub-common [Fri Jan 03 14:07:45.648 2025] grub-editenv [Fri Jan 03 14:07:45.648 2025] grub-efi [Fri Jan 03 14:07:45.648 2025] less [Fri Jan 03 14:07:45.648 2025] lib32-libgcc1 [Fri Jan 03 14:07:45.648 2025] lib32-libstdc++6 [Fri Jan 03 14:07:45.648 2025] libdw1 [Fri Jan 03 14:07:45.648 2025] libelf1 [Fri Jan 03 14:07:45.648 2025] libgcc1 [Fri Jan 03 14:07:45.648 2025] libgdbm-compat4 [Fri Jan 03 14:07:45.648 2025] libgdbm6 [Fri Jan 03 14:07:45.648 2025] libgmp10 [Fri Jan 03 14:07:45.648 2025] libidn2-0 [Fri Jan 03 14:07:45.664 2025] libreadline8 [Fri Jan 03 14:07:45.664 2025] libstdc++6 [Fri Jan 03 14:07:45.664 2025] libunistring2 [Fri Jan 03 14:07:45.664 2025] libvte-2.91-0 [Fri Jan 03 14:07:45.664 2025] nettle [Fri Jan 03 14:07:45.664 2025] onboard [Fri Jan 03 14:07:45.664 2025] parted [Fri Jan 03 14:07:45.664 2025] rxvt-unicode [Fri Jan 03 14:07:45.664 2025] [Fri Jan 03 14:07:45.664 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:07:45.664 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:07:45.679 2025] the opkg remove command. i.e.: [Fri Jan 03 14:07:45.679 2025] opkg remove [Fri Jan 03 14:07:45.679 2025] Where is the name printed in the list above [Fri Jan 03 14:07:45.679 2025] [Fri Jan 03 14:07:45.679 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:07:45.695 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:07:45.699 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:07:45.699 2025] also remove the dependent packages as well [Fri Jan 03 14:07:45.711 2025] *************************************************************** [Fri Jan 03 14:07:45.711 2025] *************************************************************** [Fri Jan 03 14:07:50.618 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:07:50.625 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:07:50.797 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:07:50.813 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:07:50.892 2025] [Fri Jan 03 14:07:50.892 2025] _____ _____ _ _ [Fri Jan 03 14:07:50.907 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:07:50.907 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:07:50.907 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:07:50.923 2025] |___| |___| [Fri Jan 03 14:07:50.923 2025] [Fri Jan 03 14:07:50.923 2025] Arago Project am62xx-evm - [Fri Jan 03 14:07:50.923 2025] [Fri Jan 03 14:07:50.923 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:07:50.923 2025] [Fri Jan 03 14:07:50.923 2025] am62xx-evm login: [ 11.688835] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:51.001 2025] [ 11.688860] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:51.001 2025] [ 11.688880] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.017 2025] [ 11.688941] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:51.019 2025] [ 11.688946] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:51.019 2025] [ 11.688954] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.033 2025] [ 11.688992] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:51.033 2025] [ 11.688997] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:51.033 2025] [ 11.689005] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.049 2025] [ 11.689039] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:51.049 2025] [ 11.689045] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:51.064 2025] [ 11.689055] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.064 2025] [ 11.689089] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:51.064 2025] [ 11.689094] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:51.080 2025] [ 11.689101] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.080 2025] [ 11.689249] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:51.095 2025] [ 11.689256] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:51.095 2025] [ 11.689270] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.095 2025] [ 11.689310] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:51.111 2025] [ 11.689316] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:51.119 2025] [ 11.689323] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:51.127 2025] [ 11.689359] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:51.127 2025] [ 11.689364] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:51.127 2025] [ 11.689371] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.284 2025] [ 13.984508] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:53.300 2025] [ 13.984530] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:53.300 2025] [ 13.984547] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.300 2025] [ 13.984598] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:53.315 2025] [ 13.984603] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:53.315 2025] [ 13.984610] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.331 2025] [ 13.984646] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:53.331 2025] [ 13.984651] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:53.331 2025] [ 13.984658] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.347 2025] [ 13.984693] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:53.347 2025] [ 13.984698] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:53.347 2025] [ 13.984709] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.363 2025] [ 13.984741] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:53.363 2025] [ 13.984746] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:53.378 2025] [ 13.984753] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.378 2025] [ 13.984790] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:53.378 2025] [ 13.984795] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:53.394 2025] [ 13.984803] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.394 2025] [ 13.984836] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:53.410 2025] [ 13.984840] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:53.410 2025] [ 13.984852] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.410 2025] [ 13.984886] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:53.425 2025] [ 13.984891] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:53.430 2025] [ 13.984898] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:53.782 2025] [ 14.469069] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:07:57.042 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:07:57.051 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:07:58.898 2025] [ 19.587755] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:58.907 2025] [ 19.587782] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:58.915 2025] [ 19.587801] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:58.916 2025] [ 19.587858] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:58.925 2025] [ 19.587863] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:58.930 2025] [ 19.587871] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:58.935 2025] [ 19.587906] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:58.941 2025] [ 19.587912] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:58.946 2025] [ 19.587919] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:58.952 2025] [ 19.587957] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:58.958 2025] [ 19.587962] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:58.968 2025] [ 19.587970] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:58.971 2025] [ 19.588010] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:58.977 2025] [ 19.588015] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:58.983 2025] [ 19.588023] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:58.989 2025] [ 19.588058] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:59.000 2025] [ 19.588063] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:59.003 2025] [ 19.588074] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.009 2025] [ 19.588109] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:59.015 2025] [ 19.588114] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:59.021 2025] [ 19.588220] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.027 2025] [ 19.588273] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:59.033 2025] [ 19.588279] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:59.039 2025] [ 19.588290] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.046 2025] [ 19.654948] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:07:59.052 2025] [ 19.654975] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:07:59.058 2025] [ 19.654998] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.063 2025] [ 19.655064] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:07:59.069 2025] [ 19.655069] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:07:59.076 2025] [ 19.655076] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.081 2025] [ 19.655111] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:07:59.087 2025] [ 19.655116] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:07:59.093 2025] [ 19.665042] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.100 2025] [ 19.665260] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:07:59.110 2025] [ 19.665270] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:07:59.112 2025] [ 19.665283] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.119 2025] [ 19.665332] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:07:59.125 2025] [ 19.665337] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:07:59.131 2025] [ 19.665345] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.137 2025] [ 19.665380] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:07:59.143 2025] [ 19.665388] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:07:59.148 2025] [ 19.665394] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.154 2025] [ 19.665430] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:07:59.161 2025] [ 19.665435] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:07:59.168 2025] [ 19.665441] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:07:59.174 2025] [ 19.665484] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:07:59.180 2025] [ 19.665489] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:07:59.186 2025] [ 19.665502] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:31.680 2025] [Fri Jan 03 14:08:31.680 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:08:31.711 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:08:31.758 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:08:31.774 2025] Trying to boot from MMC1 [Fri Jan 03 14:08:31.948 2025] Authentication passed [Fri Jan 03 14:08:31.948 2025] Authentication passed [Fri Jan 03 14:08:31.963 2025] Authentication passed [Fri Jan 03 14:08:31.994 2025] Authentication passed [Fri Jan 03 14:08:31.994 2025] Authentication passed [Fri Jan 03 14:08:32.010 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:08:32.010 2025] [Fri Jan 03 14:08:32.010 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:08:32.010 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:08:32.310 2025] [Fri Jan 03 14:08:32.310 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:08:32.325 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:08:32.358 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:08:32.373 2025] Error: could not access storage. [Fri Jan 03 14:08:32.373 2025] Trying to boot from MMC1 [Fri Jan 03 14:08:32.531 2025] Authentication passed [Fri Jan 03 14:08:32.531 2025] Authentication passed [Fri Jan 03 14:08:33.192 2025] [Fri Jan 03 14:08:33.192 2025] [Fri Jan 03 14:08:33.192 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:08:33.192 2025] [Fri Jan 03 14:08:33.192 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:08:33.192 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:08:33.192 2025] DRAM: 2 GiB [Fri Jan 03 14:08:33.443 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:08:33.443 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:08:33.459 2025] Loading Environment from MMC... OK [Fri Jan 03 14:08:33.666 2025] In: serial [Fri Jan 03 14:08:33.666 2025] Out: serial [Fri Jan 03 14:08:33.671 2025] Err: serial [Fri Jan 03 14:08:33.671 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:08:33.671 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:08:33.834 2025] switch to partitions #0, OK [Fri Jan 03 14:08:33.834 2025] mmc0(part 0) is current device [Fri Jan 03 14:08:33.978 2025] SD/MMC found on device 0 [Fri Jan 03 14:08:33.980 2025] Running eMMC boot ... [Fri Jan 03 14:08:33.997 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:08:34.002 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:08:34.006 2025] Importing environment from mmc0 ... [Fri Jan 03 14:08:34.226 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:08:34.250 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:08:34.252 2025] Working FDT set to 88000000 [Fri Jan 03 14:08:34.257 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:08:34.262 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:08:34.267 2025] Working FDT set to 88000000 [Fri Jan 03 14:08:34.290 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:08:34.296 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:08:34.303 2025] Working FDT set to 8feed000 [Fri Jan 03 14:08:34.315 2025] [Fri Jan 03 14:08:34.315 2025] Starting kernel ... [Fri Jan 03 14:08:34.319 2025] [Fri Jan 03 14:08:34.350 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:08:34.357 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:08:34.376 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:08:34.386 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:08:34.472 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:08:34.477 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:08:34.483 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:08:34.489 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:08:34.497 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:08:34.505 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:08:34.514 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:08:34.522 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:08:34.532 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:08:34.540 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:08:34.550 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:08:34.558 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:08:34.570 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:08:34.575 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:08:34.584 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:08:34.590 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:08:34.595 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:08:34.600 2025] [ 0.000000] Normal empty [Fri Jan 03 14:08:34.605 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:08:34.609 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:08:34.613 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:08:34.618 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:08:34.623 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:08:34.628 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:08:34.635 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:08:34.640 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:08:34.645 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:08:34.652 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:08:34.663 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:08:34.665 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:08:34.671 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:08:34.676 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:08:34.681 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:08:34.686 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:08:34.693 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:08:34.699 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:08:34.704 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:08:34.713 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:08:34.714 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:08:34.720 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:08:34.725 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:08:34.734 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:08:34.737 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:08:34.785 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:08:34.798 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:08:34.805 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:08:34.813 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:08:34.817 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:08:34.834 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:08:34.839 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:08:34.845 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:08:34.851 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:08:34.857 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:08:34.862 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:08:34.870 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:08:34.877 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:08:34.882 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:08:34.891 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:08:34.893 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:08:34.899 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:08:34.903 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:08:34.908 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:08:34.913 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:08:34.919 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:08:34.924 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:08:34.932 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:08:34.939 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:08:34.945 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:08:34.950 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:08:34.957 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:08:34.964 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:08:34.972 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:08:34.978 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:08:34.988 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:08:34.996 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 14:08:35.006 2025] [ 0.528877] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:08:35.018 2025] [ 0.528886] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:08:35.020 2025] [ 0.528970] LSM: Security Framework initializing [Fri Jan 03 14:08:35.025 2025] [ 0.529107] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:08:35.035 2025] [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:08:35.043 2025] [ 0.530836] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:08:35.044 2025] [ 0.530844] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:08:35.050 2025] [ 0.530890] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:08:35.059 2025] [ 0.583352] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:08:35.063 2025] [ 0.583589] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:08:35.072 2025] [ 0.583678] EFI services will not be available. [Fri Jan 03 14:08:35.077 2025] [ 0.583937] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:08:35.082 2025] [ 0.584711] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:08:35.088 2025] [ 0.584824] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:08:35.093 2025] [ 0.584841] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:08:35.100 2025] [ 0.584901] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:08:35.110 2025] [ 0.634986] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:08:35.111 2025] [ 0.635075] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:08:35.118 2025] [ 0.635088] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:08:35.126 2025] [ 0.635118] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:08:35.133 2025] [ 0.661001] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:08:35.138 2025] [ 0.661082] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:08:35.145 2025] [ 0.661096] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:08:35.152 2025] [ 0.661127] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:08:35.158 2025] [ 0.661185] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:08:35.163 2025] [ 0.661191] SMP: Total of 4 processors activated. [Fri Jan 03 14:08:35.169 2025] [ 0.695385] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:08:35.174 2025] [ 0.695389] CPU features: detected: CRC32 instructions [Fri Jan 03 14:08:35.179 2025] [ 0.695435] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:08:35.185 2025] [ 0.695437] alternatives: applying system-wide alternatives [Fri Jan 03 14:08:35.190 2025] [ 0.696960] devtmpfs: initialized [Fri Jan 03 14:08:35.195 2025] [ 0.708600] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:08:35.202 2025] [ 0.708627] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:08:35.209 2025] [ 0.713847] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:08:35.216 2025] [ 0.714672] DMI not present or invalid. [Fri Jan 03 14:08:35.220 2025] [ 0.715201] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:08:35.226 2025] [ 0.729156] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:08:35.232 2025] [ 0.729442] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:08:35.239 2025] [ 0.729633] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:08:35.251 2025] [ 0.729778] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:08:35.253 2025] [ 0.729968] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:08:35.261 2025] [ 0.730605] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:08:35.268 2025] [ 0.730610] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:08:35.275 2025] [ 0.730855] ASID allocator initialised with 65536 entries [Fri Jan 03 14:08:35.280 2025] [ 0.745776] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:08:35.287 2025] [ 0.754930] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:08:35.294 2025] [ 0.754942] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:08:35.301 2025] [ 0.754946] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:08:35.307 2025] [ 0.754949] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:08:35.314 2025] [ 0.754953] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:08:35.321 2025] [ 0.754955] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:08:35.327 2025] [ 0.754959] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:08:35.337 2025] [ 0.754963] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:08:35.340 2025] [ 0.756116] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:08:35.352 2025] [ 0.756630] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:08:35.359 2025] [ 0.756637] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:08:35.363 2025] [ 0.756650] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:08:35.371 2025] [ 0.756665] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:08:35.381 2025] [ 0.756675] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.387 2025] [ 0.756681] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:08:35.394 2025] [ 0.756909] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:08:35.401 2025] [ 0.756914] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:08:35.408 2025] [ 0.756923] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:08:35.417 2025] [ 0.756936] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:08:35.426 2025] [ 0.756944] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.434 2025] [ 0.756947] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:08:35.440 2025] [ 0.757202] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:08:35.448 2025] [ 0.757206] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:08:35.455 2025] [ 0.757219] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:08:35.464 2025] [i 0.757232] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:08:35.472 2025] [ 0.9[99445] printk: console [ttyS2] printing thread started [Fri Jan 03 14:08:35.478 2025] 0.757240] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.488 2025] [ 0.999466] printk: console [ttyS2] enabled [Fri Jan 03 14:08:35.490 2025] [ 0.999470] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:08:35.495 2025] [ 1.012400] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:08:35.502 2025] [ 1.013651] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:08:35.508 2025] [ 1.013662] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:08:35.515 2025] [ 1.013674] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:08:35.524 2025] [ 1.013693] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:08:35.535 2025] [ 1.013705] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.541 2025] [ 1.013710] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:08:35.548 2025] [ 1.013741] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:08:35.557 2025] [ 1.014725] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:08:35.564 2025] [ 1.014734] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:08:35.570 2025] [ 1.014746] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:08:35.579 2025] [ 1.014760] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:08:35.591 2025] [ 1.014770] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.593 2025] [ 1.014774] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:08:35.604 2025] [ 1.017820] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:08:35.607 2025] [ 1.024691] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:08:35.615 2025] [ 1.031165] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:08:35.624 2025] [ 1.031587] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:08:35.627 2025] [ 1.031596] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:08:35.634 2025] [ 1.031610] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:08:35.644 2025] [ 1.031627] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:08:35.655 2025] [ 1.031641] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.662 2025] [ 1.031647] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:08:35.668 2025] [ 1.065085] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:08:35.675 2025] [ 1.065371] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:08:35.685 2025] [ 1.066187] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:08:35.688 2025] [ 1.066195] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:08:35.699 2025] [ 1.066209] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:08:35.707 2025] [ 1.066237] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:08:35.720 2025] [ 1.066253] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.726 2025] [ 1.066258] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:08:35.733 2025] [ 1.067018] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:08:35.740 2025] [ 1.067086] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:08:35.753 2025] [ 1.067340] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:08:35.760 2025] [ 1.067354] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:08:35.767 2025] [ 1.067359] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:08:35.773 2025] [ 1.068146] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:08:35.782 2025] [ 1.084596] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:08:35.788 2025] [ 1.089608] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:08:35.801 2025] [ 1.089622] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:08:35.808 2025] [ 1.089633] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:08:35.810 2025] [ 1.089648] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:08:35.819 2025] [ 1.089672] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:08:35.828 2025] [ 1.089683] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.835 2025] [ 1.089688] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:08:35.841 2025] [ 1.090094] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:08:35.847 2025] [ 1.090103] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:08:35.853 2025] [ 1.090114] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:08:35.863 2025] [ 1.090133] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:08:35.873 2025] [ 1.090144] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.880 2025] [ 1.090148] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:08:35.886 2025] [ 1.090202] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:08:35.892 2025] [ 1.090209] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:08:35.898 2025] [ 1.090220] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:08:35.907 2025] [ 1.090242] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:08:35.914 2025] [ 1.090247] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:08:35.920 2025] [ 1.090256] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:08:35.929 2025] [ 1.090259] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:08:35.939 2025] [ 1.090268] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.947 2025] [ 1.090271] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:08:35.956 2025] [ 1.090271] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:08:35.961 2025] [ 1.090284] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:08:35.969 2025] [ 1.090287] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:08:35.975 2025] [ 1.091111] mmc1: CQHCI version 5.10 [Fri Jan 03 14:08:35.980 2025] [ 1.091245] mmc2: CQHCI version 5.10 [Fri Jan 03 14:08:35.985 2025] [ 1.091731] mmc0: CQHCI version 5.10 [Fri Jan 03 14:08:35.989 2025] [ 1.093434] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:08:35.995 2025] [ 1.095815] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:08:36.003 2025] [ 1.098817] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:08:36.009 2025] [ 1.099011] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:08:36.015 2025] [ 1.099097] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:08:36.022 2025] [ 1.102196] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:08:36.027 2025] [ 1.102396] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:08:36.033 2025] [ 1.102453] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:08:36.043 2025] [ 1.104166] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:08:36.048 2025] [ 1.104176] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:08:36.055 2025] [ 1.104202] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:08:36.067 2025] [ 1.104218] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:08:36.071 2025] [ 1.104230] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:08:36.078 2025] [ 1.104234] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:08:36.085 2025] [ 1.104243] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:08:36.094 2025] [ 1.104254] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:08:36.103 2025] [ 1.104263] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:08:36.110 2025] [ 1.104272] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:08:36.116 2025] [ 1.104687] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:08:36.124 2025] [ 1.104692] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:08:36.135 2025] [ 1.104709] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:08:36.139 2025] [ 1.104720] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:08:36.150 2025] [ 1.104724] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:08:36.151 2025] [ 1.105238] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:08:36.160 2025] [ 1.105252] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:08:36.166 2025] [ 1.105256] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:08:36.171 2025] [ 1.105346] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:08:36.180 2025] [ 1.105361] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:08:36.189 2025] [ 1.105364] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:08:36.191 2025] [ 1.105431] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:08:36.200 2025] [ 1.105441] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:08:36.206 2025] [ 1.105444] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:08:36.211 2025] [ 1.106109] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:08:36.218 2025] [ 1.108990] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:08:36.225 2025] [ 1.121558] ALSA device list: [Fri Jan 03 14:08:36.230 2025] [ 1.121570] No soundcards found. [Fri Jan 03 14:08:36.236 2025] [ 1.128157] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:08:36.241 2025] [ 1.133702] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:08:36.248 2025] [ 1.143373] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:08:36.254 2025] [ 1.143548] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:08:36.263 2025] [ 1.189434] mmc1: new MMC card at address 0001 [Fri Jan 03 14:08:36.268 2025] [ 1.190261] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:08:36.273 2025] [ 1.198281] mmcblk1: p1 [Fri Jan 03 14:08:36.277 2025] [ 1.199110] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:08:36.283 2025] [ 1.200795] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:08:36.287 2025] [ 1.202203] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:08:36.292 2025] [ 1.280877] mmc0: Command Queue Engine enabled [Fri Jan 03 14:08:36.298 2025] [ 1.280895] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:08:36.303 2025] [ 1.281724] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:08:36.308 2025] [ 1.285611] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:08:36.312 2025] [ 1.286714] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:08:36.317 2025] [ 1.288148] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:08:36.321 2025] [ 1.289277] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:08:36.326 2025] [ 1.304795] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:08:36.332 2025] [ 1.305174] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:36.338 2025] [ 1.305256] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:08:36.344 2025] [ 1.305405] devtmpfs: mounted [Fri Jan 03 14:08:36.351 2025] [ 1.306834] Freeing unused kernel memory: 1856K [Fri Jan 03 14:08:36.352 2025] [ 1.316151] Run /sbin/init as init process [Fri Jan 03 14:08:36.357 2025] [ 1.316155] with arguments: [Fri Jan 03 14:08:36.366 2025] [ 1.316157] /sbin/init [Fri Jan 03 14:08:36.366 2025] [ 1.316158] with environment: [Fri Jan 03 14:08:36.370 2025] [ 1.316160] HOME=/ [Fri Jan 03 14:08:36.370 2025] [ 1.316162] TERM=linux [Fri Jan 03 14:08:36.374 2025] [ 1.316163] syntec_extend= [Fri Jan 03 14:08:36.379 2025] [ 1.407609] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:08:36.380 2025] [ 1.445887] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:08:36.386 2025] [ 1.447040] Segment Routing with IPv6 [Fri Jan 03 14:08:36.391 2025] [ 1.447105] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:08:36.395 2025] [ 1.489229] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:08:36.423 2025] [ 1.489780] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:08:36.428 2025] [ 1.493110] systemd[1]: Hostname set to . [Fri Jan 03 14:08:36.435 2025] [ 1.624593] systemd-sysv-generator[179]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:08:36.460 2025] [ 1.919638] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:08:36.475 2025] [ 1.922410] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:08:36.493 2025] [ 1.984845] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:08:36.500 2025] [ 1.988300] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:08:36.506 2025] [ 1.989852] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:08:36.512 2025] [ 1.990351] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:08:36.518 2025] [ 1.990699] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:08:36.528 2025] [ 1.990900] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:08:36.532 2025] [ 1.991291] systemd[1]: Reached target Path Units. [Fri Jan 03 14:08:36.538 2025] [ 1.991386] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:08:36.544 2025] [ 1.991454] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:08:36.550 2025] [ 1.991540] systemd[1]: Reached target Swaps. [Fri Jan 03 14:08:36.555 2025] [ 1.995716] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:08:36.561 2025] [ 1.995888] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:08:36.566 2025] [ 2.002048] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:08:36.572 2025] [ 2.002563] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:08:36.582 2025] [ 2.003376] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:08:36.584 2025] [ 2.003903] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:08:36.590 2025] [ 2.004550] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:08:36.595 2025] [ 2.005394] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:08:36.605 2025] [ 2.007241] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:08:36.607 2025] [ 2.007743] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:08:36.612 2025] [ 2.008267] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:08:36.622 2025] [ 2.045801] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:08:36.624 2025] [ 2.049850] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:08:36.634 2025] [ 2.054574] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:08:36.645 2025] [ 2.055432] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:08:36.661 2025] [ 2.057293] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:08:36.682 2025] [ 2.061604] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:08:36.689 2025] [ 2.068559] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:08:36.697 2025] [ 2.073486] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:08:36.701 2025] [ 2.078963] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:08:36.710 2025] [ 2.084030] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:08:36.713 2025] [ 2.090361] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:08:36.722 2025] [ 2.090861] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:08:36.732 2025] [ 2.092187] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:08:36.745 2025] [ 2.092207] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:08:36.754 2025] [ 2.095749] systemd[1]: Starting Journal Service... [Fri Jan 03 14:08:36.760 2025] [ 2.099564] fuse: init (API version 7.37) [Fri Jan 03 14:08:36.765 2025] [ 2.103672] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:08:36.771 2025] [ 2.108584] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:08:36.777 2025] [ 2.113808] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:08:36.787 2025] [ 2.123873] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:08:36.788 2025] [ 2.133207] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:08:36.794 2025] [ 2.159672] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:08:36.801 2025] [ 2.171748] systemd[1]: Started RPC Bind. [Fri Jan 03 14:08:36.806 2025] [ 2.173518] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:08:36.813 2025] [ 2.175238] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:08:36.818 2025] [ 2.178021] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:08:36.824 2025] [ 2.178919] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:08:36.829 2025] [ 2.179789] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:08:36.835 2025] [ 2.195373] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:08:36.840 2025] [ 2.196733] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:08:36.845 2025] [ 2.198009] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:08:36.851 2025] [ 2.198852] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:08:36.856 2025] [ 2.200738] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:08:36.862 2025] [ 2.201578] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:08:36.867 2025] [ 2.203417] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:08:36.874 2025] [ 2.203954] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:08:36.883 2025] [ 2.205281] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:08:36.885 2025] [ 2.206533] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:08:36.892 2025] [ 2.209157] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:08:36.899 2025] [ 2.215415] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:08:36.905 2025] [ 2.219707] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:08:36.916 2025] [ 2.222949] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:08:36.927 2025] [ 2.223578] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:08:36.942 2025] [ 2.228304] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:08:36.952 2025] [ 2.228899] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:08:36.966 2025] [ 2.233295] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:08:36.970 2025] [ 2.240774] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:08:36.975 2025] [ 2.247144] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:08:36.980 2025] [ 2.248020] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:08:36.990 2025] [ 2.308587] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:08:36.992 2025] [ 2.315239] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 14:08:36.999 2025] [ 2.315855] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 14:08:37.005 2025] [ 2.337146] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 14:08:37.013 2025] [ 2.338298] systemd[1]: Started Journal Service. [Fri Jan 03 14:08:37.019 2025] [ 2.373518] systemd-journald[190]: Received client request to flush runtime journal. [Fri Jan 03 14:08:37.232 2025] [ 2.758920] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:08:37.240 2025] [ 2.758939] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:08:37.250 2025] [ 2.758961] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:08:37.264 2025] [ 2.759003] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:08:37.273 2025] [ 2.759020] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:08:37.280 2025] [ 2.788838] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:08:37.287 2025] [ 2.788857] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:08:37.298 2025] [ 2.788885] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:08:37.311 2025] [ 2.788919] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:08:37.314 2025] [ 2.788931] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:08:37.325 2025] [ 2.788935] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:08:37.329 2025] [ 2.788946] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:08:37.419 2025] [ 2.788957] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:08:37.445 2025] [ 2.788965] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:08:37.454 2025] [ 2.788971] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:08:37.462 2025] [ 2.788982] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:08:37.534 2025] [ 2.788993] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:08:37.540 2025] [ 2.807284] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:08:37.549 2025] [ 2.807300] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:08:37.581 2025] [ 2.807328] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:08:37.586 2025] [ 2.807331] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:08:37.601 2025] [ 2.807362] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:08:37.617 2025] [ 2.822735] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:08:37.632 2025] [ 2.826158] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:38:54 UTC (1681065534) [Fri Jan 03 14:08:37.658 2025] [ 2.846276] systemd-journald[190]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:08:37.664 2025] [ 2.846337] systemd-journald[190]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:08:37.695 2025] [ 2.849530] mc: Linux media interface: v0.10 [Fri Jan 03 14:08:37.714 2025] [ 2.861381] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:08:37.737 2025] [ 2.994918] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:08:37.758 2025] [ 2.996470] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:08:37.768 2025] [ 2.998300] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:08:37.784 2025] [ 3.000527] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:08:37.784 2025] [ 3.002240] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:08:37.800 2025] [ 3.002275] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:08:37.800 2025] [ 3.002322] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:08:37.816 2025] [ 3.002330] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:08:37.816 2025] [ 3.111232] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:08:37.831 2025] [ 3.128524] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:08:37.831 2025] [ 3.128560] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:08:37.858 2025] [ 3.128566] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:08:37.863 2025] [ 3.128585] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:08:37.879 2025] [ 3.128618] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:08:37.879 2025] [ 3.128635] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:08:37.894 2025] [ 3.128641] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:08:37.910 2025] [ 3.143104] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:08:37.925 2025] [ 3.143257] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:08:37.925 2025] [ 3.143401] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:08:37.941 2025] [ 3.143764] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:08:37.941 2025] [ 3.143857] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:08:37.958 2025] [ 3.181128] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:08:37.958 2025] [ 3.181169] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:08:37.988 2025] [ 3.184746] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:08:38.004 2025] [ 3.184796] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:08:38.020 2025] [ 3.184807] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:08:38.020 2025] [ 3.185474] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:08:38.035 2025] [ 3.185690] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:08:38.067 2025] [ 3.227197] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:08:38.067 2025] [ 3.227872] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:08:38.083 2025] [ 3.227900] Get kick_gpio number= (418) [Fri Jan 03 14:08:38.303 2025] [ 3.842141] random: crng init done [Fri Jan 03 14:08:38.382 2025] [ 3.911725] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:08:38.398 2025] [ 3.911750] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:08:38.398 2025] [ 3.911768] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:08:38.429 2025] [ 3.911800] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:08:38.460 2025] [ 3.911818] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:08:38.476 2025] [ 3.911823] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:08:38.491 2025] [ 3.912016] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:08:38.491 2025] [ 3.947948] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:08:38.538 2025] [ 3.950320] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:08:38.560 2025] [ 4.092660] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:08:38.570 2025] [ 4.092736] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:08:38.586 2025] [ 4.092953] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:08:38.586 2025] [ 4.092964] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:08:38.601 2025] [ 4.097987] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:08:38.617 2025] [ 4.099537] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:08:38.617 2025] [ 4.114591] hub 1-0:1.0: USB hub found [Fri Jan 03 14:08:38.632 2025] [ 4.114673] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:08:38.822 2025] [ 4.357156] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:08:39.010 2025] [ 4.548382] hub 1-1:1.0: USB hub found [Fri Jan 03 14:08:39.026 2025] [ 4.550644] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:08:39.608 2025] [ 5.134675] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:08:39.616 2025] [ 5.134747] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:39.626 2025] [ 5.149342] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:08:39.633 2025] [ 5.149387] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:39.667 2025] [ 5.192730] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:08:39.671 2025] [ 5.192766] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:39.703 2025] [ 5.230021] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:08:39.783 2025] [ 5.309122] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:08:39.787 2025] [ 5.309789] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:39.886 2025] [ 5.412660] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:08:39.906 2025] [ 5.432614] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:08:39.917 2025] [ 5.434209] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:08:39.923 2025] [ 5.434248] cfg80211: failed to load regulatory.db [Fri Jan 03 14:08:39.978 2025] [ 5.503272] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:08:39.985 2025] [ 5.503302] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:08:40.439 2025] [ 5.964707] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:08:40.449 2025] [ 5.971749] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:08:40.451 2025] [ 5.972954] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:08:40.491 2025] [ 6.017702] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:08:40.504 2025] [ 6.017739] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:08:40.743 2025] *************************************************************** [Fri Jan 03 14:08:40.748 2025] *************************************************************** [Fri Jan 03 14:08:40.755 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:08:40.761 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:08:40.767 2025] bash [Fri Jan 03 14:08:40.767 2025] cifs-utils [Fri Jan 03 14:08:40.767 2025] dosfstools [Fri Jan 03 14:08:40.767 2025] grub-common [Fri Jan 03 14:08:40.771 2025] grub-editenv [Fri Jan 03 14:08:40.775 2025] grub-efi [Fri Jan 03 14:08:40.775 2025] less [Fri Jan 03 14:08:40.775 2025] lib32-libgcc1 [Fri Jan 03 14:08:40.775 2025] lib32-libstdc++6 [Fri Jan 03 14:08:40.780 2025] libdw1 [Fri Jan 03 14:08:40.780 2025] libelf1 [Fri Jan 03 14:08:40.780 2025] libgcc1 [Fri Jan 03 14:08:40.780 2025] libgdbm-compat4 [Fri Jan 03 14:08:40.784 2025] libgdbm6 [Fri Jan 03 14:08:40.784 2025] libgmp10 [Fri Jan 03 14:08:40.785 2025] libidn2-0 [Fri Jan 03 14:08:40.785 2025] libreadline8 [Fri Jan 03 14:08:40.789 2025] libstdc++6 [Fri Jan 03 14:08:40.789 2025] libunistring2 [Fri Jan 03 14:08:40.789 2025] libvte-2.91-0 [Fri Jan 03 14:08:40.789 2025] nettle [Fri Jan 03 14:08:40.789 2025] onboard [Fri Jan 03 14:08:40.793 2025] parted [Fri Jan 03 14:08:40.793 2025] rxvt-unicode [Fri Jan 03 14:08:40.793 2025] [Fri Jan 03 14:08:40.793 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:08:40.799 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:08:40.803 2025] the opkg remove command. i.e.: [Fri Jan 03 14:08:40.807 2025] opkg remove [Fri Jan 03 14:08:40.812 2025] Where is the name printed in the list above [Fri Jan 03 14:08:40.816 2025] [Fri Jan 03 14:08:40.816 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:08:40.821 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:08:40.825 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:08:40.831 2025] also remove the dependent packages as well [Fri Jan 03 14:08:40.835 2025] *************************************************************** [Fri Jan 03 14:08:40.840 2025] *************************************************************** [Fri Jan 03 14:08:46.431 2025] [Fri Jan 03 14:08:46.432 2025] _____ _____ _ _ [Fri Jan 03 14:08:46.437 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:08:46.442 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:08:46.448 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:08:46.452 2025] |___| |___| [Fri Jan 03 14:08:46.457 2025] [Fri Jan 03 14:08:46.461 2025] Arago Project am62xx-evm - [Fri Jan 03 14:08:46.461 2025] [Fri Jan 03 14:08:46.461 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:08:46.465 2025] [Fri Jan 03 14:08:46.465 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:08:46.882 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:08:47.062 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:08:47.067 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:08:47.250 2025] [ 12.775932] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:08:47.254 2025] [ 12.775955] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:08:47.261 2025] [ 12.775970] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.267 2025] [ 12.776023] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:08:47.273 2025] [ 12.776028] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:08:47.279 2025] [ 12.776034] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.285 2025] [ 12.776147] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:08:47.291 2025] [ 12.776153] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:08:47.300 2025] [ 12.776160] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.306 2025] [ 12.776195] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:08:47.309 2025] [ 12.776203] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:08:47.316 2025] [ 12.776210] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.321 2025] [ 12.776244] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:08:47.328 2025] [ 12.776249] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:08:47.334 2025] [ 12.776256] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.340 2025] [ 12.776294] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:08:47.350 2025] [ 12.776299] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:08:47.352 2025] [ 12.776305] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.359 2025] [ 12.776339] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:08:47.365 2025] [ 12.776345] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:08:47.372 2025] [ 12.776352] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:47.377 2025] [ 12.776386] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:08:47.383 2025] [ 12.776391] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:08:47.393 2025] [ 12.776397] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.509 2025] [ 15.035467] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:08:49.515 2025] [ 15.035489] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:08:49.521 2025] [ 15.035507] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.528 2025] [ 15.035558] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:08:49.533 2025] [ 15.035563] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:08:49.539 2025] [ 15.035570] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.560 2025] [ 15.035603] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:08:49.566 2025] [ 15.035609] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:08:49.566 2025] [ 15.035616] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.571 2025] [ 15.035649] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:08:49.578 2025] [ 15.035654] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:08:49.584 2025] [ 15.035662] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.589 2025] [ 15.035698] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:08:49.594 2025] [ 15.035703] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:08:49.598 2025] [ 15.035709] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.604 2025] [ 15.035741] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:08:49.609 2025] [ 15.035746] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:08:49.617 2025] [ 15.035757] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.623 2025] [ 15.035789] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:08:49.628 2025] [ 15.035794] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:08:49.637 2025] [ 15.035801] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.638 2025] [ 15.035841] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:08:49.644 2025] [ 15.035846] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:08:49.650 2025] [ 15.035852] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:49.995 2025] [ 15.520982] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:08:53.279 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:08:53.287 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:08:55.044 2025] [ 20.570903] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:08:55.051 2025] [ 20.570932] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:08:55.057 2025] [ 20.570951] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.063 2025] [ 20.571010] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:08:55.070 2025] [ 20.571015] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:08:55.076 2025] [ 20.571026] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.082 2025] [ 20.571199] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:08:55.089 2025] [ 20.571209] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:08:55.096 2025] [ 20.571219] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.101 2025] [ 20.571271] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:08:55.119 2025] [ 20.571280] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:08:55.131 2025] [ 20.571287] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.133 2025] [ 20.571325] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:08:55.138 2025] [ 20.571330] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:08:55.144 2025] [ 20.571338] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.150 2025] [ 20.571372] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:08:55.156 2025] [ 20.571377] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:08:55.166 2025] [ 20.571384] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.171 2025] [ 20.571420] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:08:55.178 2025] [ 20.571426] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:08:55.184 2025] [ 20.571432] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.189 2025] [ 20.571467] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:08:55.196 2025] [ 20.571472] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:08:55.206 2025] [ 20.571480] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.209 2025] [ 20.649366] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:08:55.215 2025] [ 20.649390] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:08:55.222 2025] [ 20.649418] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.227 2025] [ 20.649474] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:08:55.234 2025] [ 20.649479] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:08:55.241 2025] [ 20.649492] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.249 2025] [ 20.649527] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:08:55.255 2025] [ 20.649532] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:08:55.266 2025] [ 20.649539] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.267 2025] [ 20.649575] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:08:55.273 2025] [ 20.649581] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:08:55.282 2025] [ 20.649592] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.287 2025] [ 20.649627] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:08:55.292 2025] [ 20.649636] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:08:55.298 2025] [ 20.649643] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.303 2025] [ 20.649677] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:08:55.310 2025] [ 20.649682] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:08:55.315 2025] [ 20.649689] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.321 2025] [ 20.649727] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:08:55.327 2025] [ 20.649732] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:08:55.332 2025] [ 20.649738] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:08:55.338 2025] [ 20.649772] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:08:55.345 2025] [ 20.649780] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:08:55.351 2025] [ 20.649788] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:27.709 2025] [Fri Jan 03 14:09:27.710 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:09:27.730 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:09:27.779 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:09:27.800 2025] Trying to boot from MMC1 [Fri Jan 03 14:09:27.973 2025] Authentication passed [Fri Jan 03 14:09:27.979 2025] Authentication passed [Fri Jan 03 14:09:27.986 2025] Authentication passed [Fri Jan 03 14:09:28.020 2025] Authentication passed [Fri Jan 03 14:09:28.026 2025] Authentication passed [Fri Jan 03 14:09:28.032 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:09:28.033 2025] [Fri Jan 03 14:09:28.038 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:09:28.045 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:09:28.340 2025] [Fri Jan 03 14:09:28.340 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:09:28.346 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:09:28.388 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:09:28.394 2025] Error: could not access storage. [Fri Jan 03 14:09:28.396 2025] Trying to boot from MMC1 [Fri Jan 03 14:09:28.552 2025] Authentication passed [Fri Jan 03 14:09:28.559 2025] Authentication passed [Fri Jan 03 14:09:29.212 2025] [Fri Jan 03 14:09:29.212 2025] [Fri Jan 03 14:09:29.212 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:09:29.217 2025] [Fri Jan 03 14:09:29.217 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:09:29.222 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:09:29.226 2025] DRAM: 2 GiB [Fri Jan 03 14:09:29.466 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:09:29.470 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:09:29.483 2025] Loading Environment from MMC... OK [Fri Jan 03 14:09:29.679 2025] In: serial [Fri Jan 03 14:09:29.679 2025] Out: serial [Fri Jan 03 14:09:29.679 2025] Err: serial [Fri Jan 03 14:09:29.679 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:09:29.679 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:09:29.836 2025] switch to partitions #0, OK [Fri Jan 03 14:09:29.852 2025] mmc0(part 0) is current device [Fri Jan 03 14:09:29.994 2025] SD/MMC found on device 0 [Fri Jan 03 14:09:29.994 2025] Running eMMC boot ... [Fri Jan 03 14:09:30.009 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:09:30.009 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:09:30.025 2025] Importing environment from mmc0 ... [Fri Jan 03 14:09:30.244 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:09:30.261 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:09:30.261 2025] Working FDT set to 88000000 [Fri Jan 03 14:09:30.276 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:09:30.276 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:09:30.276 2025] Working FDT set to 88000000 [Fri Jan 03 14:09:30.308 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:09:30.308 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:09:30.323 2025] Working FDT set to 8feed000 [Fri Jan 03 14:09:30.323 2025] [Fri Jan 03 14:09:30.323 2025] Starting kernel ... [Fri Jan 03 14:09:30.339 2025] [Fri Jan 03 14:09:30.370 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:09:30.370 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:09:30.386 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:09:30.402 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:09:30.496 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:09:30.496 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:09:30.496 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:09:30.496 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:09:30.512 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:09:30.512 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:09:30.528 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:09:30.543 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:09:30.543 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:09:30.562 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:09:30.562 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:09:30.575 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:09:30.575 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:09:30.591 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:09:30.606 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:09:30.606 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:09:30.606 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:09:30.606 2025] [ 0.000000] Normal empty [Fri Jan 03 14:09:30.622 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:09:30.622 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:09:30.622 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:09:30.622 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:09:30.638 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:09:30.638 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:09:30.654 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:09:30.654 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:09:30.662 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:09:30.670 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:09:30.670 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:09:30.685 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:09:30.685 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:09:30.685 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:09:30.701 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:09:30.701 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:09:30.701 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:09:30.717 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:09:30.717 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:09:30.717 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:09:30.732 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:09:30.732 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:09:30.732 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:09:30.748 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:09:30.748 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:09:30.795 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:09:30.811 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:09:30.811 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:09:30.827 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:09:30.827 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:09:30.842 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:09:30.858 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:09:30.862 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:09:30.862 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:09:30.874 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:09:30.874 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:09:30.890 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:09:30.890 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:09:30.890 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:09:30.905 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:09:30.905 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:09:30.921 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:09:30.921 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:09:30.921 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:09:30.937 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:09:30.937 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:09:30.937 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:09:30.952 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:09:30.952 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:09:30.963 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:09:30.968 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:09:30.968 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:09:30.984 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:09:30.984 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:09:30.984 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:09:30.999 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:09:31.015 2025] [ 0.000250] Console: colour dummy device 80x25 [Fri Jan 03 14:09:31.015 2025] [ 0.528890] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:09:31.031 2025] [ 0.528901] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:09:31.031 2025] [ 0.528980] LSM: Security Framework initializing [Fri Jan 03 14:09:31.031 2025] [ 0.529115] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:09:31.046 2025] [ 0.529139] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:09:31.046 2025] [ 0.530825] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:09:31.063 2025] [ 0.530832] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:09:31.063 2025] [ 0.530876] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:09:31.078 2025] [ 0.583344] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:09:31.078 2025] [ 0.583582] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:09:31.094 2025] [ 0.583667] EFI services will not be available. [Fri Jan 03 14:09:31.094 2025] [ 0.583925] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:09:31.094 2025] [ 0.584702] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:09:31.094 2025] [ 0.584819] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:09:31.110 2025] [ 0.584836] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:09:31.110 2025] [ 0.584894] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:09:31.125 2025] [ 0.634987] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:09:31.125 2025] [ 0.635075] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:09:31.141 2025] [ 0.635088] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:09:31.141 2025] [ 0.635122] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:09:31.157 2025] [ 0.660998] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:09:31.157 2025] [ 0.661082] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:09:31.164 2025] [ 0.661095] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:09:31.173 2025] [ 0.661126] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:09:31.173 2025] [ 0.661182] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:09:31.173 2025] [ 0.661188] SMP: Total of 4 processors activated. [Fri Jan 03 14:09:31.188 2025] [ 0.695374] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:09:31.188 2025] [ 0.695377] CPU features: detected: CRC32 instructions [Fri Jan 03 14:09:31.188 2025] [ 0.695427] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:09:31.204 2025] [ 0.695429] alternatives: applying system-wide alternatives [Fri Jan 03 14:09:31.204 2025] [ 0.696943] devtmpfs: initialized [Fri Jan 03 14:09:31.204 2025] [ 0.708576] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:09:31.220 2025] [ 0.708603] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:09:31.220 2025] [ 0.713753] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:09:31.235 2025] [ 0.714572] DMI not present or invalid. [Fri Jan 03 14:09:31.235 2025] [ 0.715106] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:09:31.235 2025] [ 0.729137] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:09:31.251 2025] [ 0.729422] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:09:31.251 2025] [ 0.729618] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:09:31.267 2025] [ 0.729759] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:09:31.267 2025] [ 0.729954] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:09:31.283 2025] [ 0.730586] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:09:31.283 2025] [ 0.730591] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:09:31.298 2025] [ 0.730836] ASID allocator initialised with 65536 entries [Fri Jan 03 14:09:31.298 2025] [ 0.745763] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:09:31.298 2025] [ 0.754925] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:09:31.314 2025] [ 0.754936] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:09:31.314 2025] [ 0.754941] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:09:31.314 2025] [ 0.754943] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:09:31.329 2025] [ 0.754947] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:09:31.329 2025] [ 0.754950] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:09:31.345 2025] [ 0.754953] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:09:31.345 2025] [ 0.754956] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:09:31.361 2025] [ 0.756155] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:09:31.364 2025] [ 0.756695] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:09:31.377 2025] [ 0.756703] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:09:31.377 2025] [ 0.756716] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:09:31.392 2025] [ 0.756731] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:09:31.392 2025] [ 0.756742] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.408 2025] [ 0.756748] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:09:31.408 2025] [ 0.756978] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:09:31.408 2025] [ 0.756983] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:09:31.424 2025] [ 0.756992] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:09:31.424 2025] [ 0.757005] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:09:31.439 2025] [ 0.757014] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.455 2025] [ 0.757018] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:09:31.455 2025] [ 0.757249] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:09:31.471 2025] [ 0.757253] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:09:31.471 2025] [ 0.757263] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:09:31.471 2025] [ 0.757275] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:09:31.487 2025] [ 0.757283] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.487 2025] [ 0.757287] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:09:31.502 2025] [ 0.757523] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:09:31.502 2025] [ 0.757527] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:09:31.518 2025] [ 1[.027716] printk: console [ttyS2] printing thread started [Fri Jan 03 14:09:31.518 2025] 0.757541] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:09:31.534 2025] [ 1.027725] printk: console [ttyS2] enabled [Fri Jan 03 14:09:31.534 2025] [ 1.027729] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:09:31.534 2025] [ 1.041989] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:09:31.549 2025] [ 1.043210] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:09:31.549 2025] [ 1.043219] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:09:31.565 2025] [ 1.043231] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:09:31.565 2025] [ 1.043249] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:09:31.581 2025] [ 1.043261] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.581 2025] [ 1.043266] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:09:31.596 2025] [ 1.043297] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:09:31.596 2025] [ 1.044236] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:09:31.615 2025] [ 1.044244] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:09:31.620 2025] [ 1.044256] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:09:31.629 2025] [ 1.044271] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:09:31.637 2025] [ 1.044282] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.645 2025] [ 1.044286] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:09:31.652 2025] [ 1.047219] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:09:31.659 2025] [ 1.053677] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:09:31.665 2025] [ 1.060470] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:09:31.671 2025] [ 1.060903] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:09:31.678 2025] [ 1.060909] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:09:31.684 2025] [ 1.060923] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:09:31.695 2025] [ 1.060939] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:09:31.706 2025] [ 1.060953] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.712 2025] [ 1.060958] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:09:31.718 2025] [ 1.094168] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:09:31.727 2025] [ 1.094453] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:09:31.737 2025] [ 1.095225] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:09:31.739 2025] [ 1.095234] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:09:31.745 2025] [ 1.095245] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:09:31.758 2025] [ 1.095273] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:09:31.770 2025] [ 1.095288] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.777 2025] [ 1.095293] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:09:31.783 2025] [ 1.096058] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:09:31.791 2025] [ 1.096103] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:09:31.804 2025] [ 1.096388] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:09:31.810 2025] [ 1.096400] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:09:31.817 2025] [ 1.096405] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:09:31.823 2025] [ 1.097184] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:09:31.832 2025] [ 1.113665] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:09:31.838 2025] [ 1.118459] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:09:31.851 2025] [ 1.118702] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:09:31.854 2025] [ 1.118715] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:09:31.860 2025] [ 1.118726] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:09:31.870 2025] [ 1.118749] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:09:31.879 2025] [ 1.118760] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.887 2025] [ 1.118765] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:09:31.893 2025] [ 1.118887] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:09:31.899 2025] [ 1.118892] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:09:31.904 2025] [ 1.118903] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:09:31.914 2025] [ 1.118919] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:09:31.923 2025] [ 1.118930] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.930 2025] [ 1.118933] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:09:31.936 2025] [ 1.118939] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:09:31.942 2025] [ 1.118942] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:09:31.949 2025] [ 1.118950] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:09:31.959 2025] [ 1.118962] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:09:31.974 2025] [ 1.118971] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:09:31.975 2025] [ 1.118975] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:09:31.981 2025] [ 1.119465] mmc1: CQHCI version 5.10 [Fri Jan 03 14:09:31.986 2025] [ 1.120427] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:09:31.992 2025] [ 1.120441] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:09:32.001 2025] [ 1.120459] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:09:32.007 2025] [ 1.120482] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:09:32.021 2025] [ 1.120500] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:09:32.027 2025] [ 1.120505] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:09:32.030 2025] [ 1.120917] mmc0: CQHCI version 5.10 [Fri Jan 03 14:09:32.035 2025] [ 1.121016] mmc2: CQHCI version 5.10 [Fri Jan 03 14:09:32.039 2025] [ 1.123426] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:09:32.046 2025] [ 1.125759] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:09:32.058 2025] [ 1.128673] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:09:32.063 2025] [ 1.128864] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:09:32.067 2025] [ 1.128921] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:09:32.076 2025] [ 1.131982] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:09:32.078 2025] [ 1.132200] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:09:32.084 2025] [ 1.132265] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:09:32.091 2025] [ 1.133876] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:09:32.099 2025] [ 1.133886] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:09:32.106 2025] [ 1.133906] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:09:32.116 2025] [ 1.133923] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:09:32.121 2025] [ 1.133934] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:09:32.127 2025] [ 1.133942] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:09:32.135 2025] [ 1.133951] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:09:32.143 2025] [ 1.133962] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:09:32.152 2025] [ 1.133971] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:09:32.159 2025] [ 1.133976] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:09:32.167 2025] [ 1.134443] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:09:32.173 2025] [ 1.134451] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:09:32.180 2025] [ 1.134463] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:09:32.189 2025] [ 1.134474] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:09:32.196 2025] [ 1.134478] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:09:32.202 2025] [ 1.134975] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:09:32.209 2025] [ 1.134989] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:09:32.216 2025] [ 1.134993] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:09:32.220 2025] [ 1.135092] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:09:32.229 2025] [ 1.135104] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:09:32.235 2025] [ 1.135108] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:09:32.241 2025] [ 1.135208] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:09:32.249 2025] [ 1.135220] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:09:32.255 2025] [ 1.135223] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:09:32.260 2025] [ 1.135874] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:09:32.268 2025] [ 1.138694] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:09:32.274 2025] [ 1.150864] ALSA device list: [Fri Jan 03 14:09:32.278 2025] [ 1.150875] No soundcards found. [Fri Jan 03 14:09:32.284 2025] [ 1.158037] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:09:32.289 2025] [ 1.160284] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:09:32.296 2025] [ 1.167303] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:09:32.307 2025] [ 1.167475] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:09:32.311 2025] [ 1.213332] mmc1: new MMC card at address 0001 [Fri Jan 03 14:09:32.317 2025] [ 1.214125] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:09:32.322 2025] [ 1.222181] mmcblk1: p1 [Fri Jan 03 14:09:32.326 2025] [ 1.222969] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:09:32.332 2025] [ 1.224738] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:09:32.337 2025] [ 1.226053] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:09:32.342 2025] [ 1.310003] mmc0: Command Queue Engine enabled [Fri Jan 03 14:09:32.347 2025] [ 1.310019] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:09:32.352 2025] [ 1.310765] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:09:32.356 2025] [ 1.314645] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:09:32.361 2025] [ 1.315763] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:09:32.366 2025] [ 1.317105] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:09:32.370 2025] [ 1.318280] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:09:32.375 2025] [ 1.342634] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:09:32.381 2025] [ 1.343009] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:32.387 2025] [ 1.343086] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:09:32.393 2025] [ 1.343343] devtmpfs: mounted [Fri Jan 03 14:09:32.398 2025] [ 1.344727] Freeing unused kernel memory: 1856K [Fri Jan 03 14:09:32.403 2025] [ 1.345248] Run /sbin/init as init process [Fri Jan 03 14:09:32.407 2025] [ 1.345252] with arguments: [Fri Jan 03 14:09:32.413 2025] [ 1.345253] /sbin/init [Fri Jan 03 14:09:32.417 2025] [ 1.345255] with environment: [Fri Jan 03 14:09:32.417 2025] [ 1.345256] HOME=/ [Fri Jan 03 14:09:32.421 2025] [ 1.345258] TERM=linux [Fri Jan 03 14:09:32.422 2025] [ 1.345260] syntec_extend= [Fri Jan 03 14:09:32.427 2025] [ 1.436537] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:09:32.432 2025] [ 1.475114] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:09:32.436 2025] [ 1.476373] Segment Routing with IPv6 [Fri Jan 03 14:09:32.440 2025] [ 1.476407] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:09:32.445 2025] [ 1.512415] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:09:32.471 2025] [ 1.512976] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:09:32.476 2025] [ 1.516316] systemd[1]: Hostname set to . [Fri Jan 03 14:09:32.481 2025] [ 1.648297] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:09:32.506 2025] [ 1.951646] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:09:32.523 2025] [ 1.954431] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:09:32.541 2025] [ 2.017779] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:09:32.548 2025] [ 2.021094] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:09:32.555 2025] [ 2.022641] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:09:32.560 2025] [ 2.023112] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:09:32.568 2025] [ 2.023514] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:09:32.575 2025] [ 2.023733] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:09:32.582 2025] [ 2.024120] systemd[1]: Reached target Path Units. [Fri Jan 03 14:09:32.587 2025] [ 2.024251] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:09:32.592 2025] [ 2.024335] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:09:32.599 2025] [ 2.024424] systemd[1]: Reached target Swaps. [Fri Jan 03 14:09:32.604 2025] [ 2.028649] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:09:32.609 2025] [ 2.028826] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:09:32.615 2025] [ 2.034949] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:09:32.621 2025] [ 2.035426] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:09:32.626 2025] [ 2.036266] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:09:32.635 2025] [ 2.036798] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:09:32.641 2025] [ 2.037360] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:09:32.646 2025] [ 2.038122] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:09:32.652 2025] [ 2.040044] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:09:32.657 2025] [ 2.040600] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:09:32.662 2025] [ 2.041080] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:09:32.667 2025] [ 2.068985] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:09:32.672 2025] [ 2.073090] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:09:32.678 2025] [ 2.077393] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:09:32.683 2025] [ 2.078247] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:09:32.700 2025] [ 2.079574] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:09:32.711 2025] [ 2.083492] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:09:32.725 2025] [ 2.089905] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:09:32.728 2025] [ 2.095237] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:09:32.734 2025] [ 2.100450] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:09:32.743 2025] [ 2.105732] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:09:32.745 2025] [ 2.111547] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:09:32.750 2025] [ 2.112093] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:09:32.761 2025] [ 2.113543] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:09:32.778 2025] [ 2.113568] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:09:32.783 2025] [ 2.117117] systemd[1]: Starting Journal Service... [Fri Jan 03 14:09:32.788 2025] [ 2.124206] fuse: init (API version 7.37) [Fri Jan 03 14:09:32.793 2025] [ 2.125395] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:09:32.798 2025] [ 2.130292] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:09:32.804 2025] [ 2.135395] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:09:32.811 2025] [ 2.140707] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:09:32.821 2025] [ 2.148902] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:09:32.823 2025] [ 2.164952] systemd[1]: Started RPC Bind. [Fri Jan 03 14:09:32.832 2025] [ 2.166037] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:09:32.838 2025] [ 2.166887] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:09:32.844 2025] [ 2.167617] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:09:32.846 2025] [ 2.168355] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:09:32.853 2025] [ 2.169791] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:09:32.859 2025] [ 2.171392] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:09:32.865 2025] [ 2.172141] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:09:32.871 2025] [ 2.173920] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:09:32.881 2025] [ 2.174635] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:09:32.883 2025] [ 2.176072] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:09:32.890 2025] [ 2.176802] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:09:32.895 2025] [ 2.178381] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:09:32.902 2025] [ 2.192644] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:09:32.906 2025] [ 2.205358] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:09:32.912 2025] [ 2.210260] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:09:32.918 2025] [ 2.212255] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:09:32.924 2025] [ 2.223020] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:09:32.929 2025] [ 2.225751] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:09:32.936 2025] [ 2.230737] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:09:32.942 2025] [ 2.237502] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:09:32.947 2025] [ 2.244491] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:09:32.954 2025] [ 2.247660] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:09:32.959 2025] [ 2.250883] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:09:32.970 2025] [ 2.251536] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:09:32.992 2025] [ 2.281252] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:09:32.997 2025] [ 2.281759] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:09:33.003 2025] [ 2.286280] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:09:33.009 2025] [ 2.318584] systemd[1]: Started Journal Service. [Fri Jan 03 14:09:33.015 2025] [ 2.364672] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:09:33.284 2025] [ 2.785968] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:09:33.294 2025] [ 2.785988] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:09:33.304 2025] [ 2.786002] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:09:33.318 2025] [ 2.786041] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:09:33.358 2025] [ 2.786059] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:09:33.365 2025] [ 2.815032] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:09:33.370 2025] [ 2.815051] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:09:33.382 2025] [ 2.815083] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:09:33.390 2025] [ 2.815108] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:09:33.424 2025] [ 2.815119] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:09:33.440 2025] [ 2.815123] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:09:33.451 2025] [ 2.815133] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:09:33.513 2025] [ 2.818312] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:09:33.523 2025] [ 2.818344] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:09:33.534 2025] [ 2.818350] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:09:33.546 2025] [ 2.818383] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:09:33.565 2025] [ 2.818398] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:09:33.570 2025] [ 2.824389] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:09:33.580 2025] [ 2.824404] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:09:33.583 2025] [ 2.824446] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:09:33.586 2025] [ 2.824449] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:09:33.586 2025] [ 2.824477] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:09:33.601 2025] [ 2.837101] mc: Linux media interface: v0.10 [Fri Jan 03 14:09:33.617 2025] [ 2.903428] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:09:33.617 2025] [ 2.945374] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:09:33.633 2025] [ 2.946490] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:39:50 UTC (1681065590) [Fri Jan 03 14:09:33.633 2025] [ 2.951557] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:09:33.667 2025] [ 2.951586] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:09:33.680 2025] [ 3.007565] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:09:33.696 2025] [ 3.009775] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:09:33.696 2025] [ 3.010227] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:09:33.711 2025] [ 3.013423] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:09:33.711 2025] [ 3.015011] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:09:33.727 2025] [ 3.015045] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:09:33.727 2025] [ 3.015088] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:09:33.727 2025] [ 3.015096] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:09:33.743 2025] [ 3.020467] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:09:33.743 2025] [ 3.020503] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:09:33.759 2025] [ 3.020513] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:09:33.768 2025] [ 3.020533] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:09:33.775 2025] [ 3.020561] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:09:33.790 2025] [ 3.020577] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:09:33.790 2025] [ 3.020587] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:09:33.790 2025] [ 3.145825] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:09:33.806 2025] [ 3.145978] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:09:33.806 2025] [ 3.146135] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:09:33.822 2025] [ 3.154920] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:09:33.822 2025] [ 3.155011] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:09:33.837 2025] [ 3.162178] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:09:33.837 2025] [ 3.162231] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:09:33.853 2025] [ 3.163263] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:09:33.853 2025] [ 3.163330] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:09:33.869 2025] [ 3.163468] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:09:33.869 2025] [ 3.163476] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:09:33.869 2025] [ 3.164053] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:09:33.885 2025] [ 3.188319] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:09:33.885 2025] [ 3.284822] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:09:33.901 2025] [ 3.286010] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:09:33.901 2025] [ 3.286046] Get kick_gpio number= (418) [Fri Jan 03 14:09:34.342 2025] [ 3.855258] random: crng init done [Fri Jan 03 14:09:34.500 2025] [ 4.014362] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:09:34.515 2025] [ 4.014383] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:09:34.515 2025] [ 4.014404] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:09:34.547 2025] [ 4.014446] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:09:34.569 2025] [ 4.014464] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:09:34.578 2025] [ 4.014470] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:09:34.594 2025] [ 4.014629] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:09:34.625 2025] [ 4.054414] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:09:34.625 2025] [ 4.057019] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:09:34.769 2025] [ 4.278608] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:09:34.769 2025] [ 4.278661] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:09:34.783 2025] [ 4.278871] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:09:34.798 2025] [ 4.278881] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:09:34.814 2025] [ 4.293832] xhci-hcd xhci-hcd.4.auto: irq 467, io mem 0x31100000 [Fri Jan 03 14:09:34.814 2025] [ 4.302751] hub 1-0:1.0: USB hub found [Fri Jan 03 14:09:34.814 2025] [ 4.302847] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:09:34.829 2025] [ 4.304515] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:09:35.036 2025] [ 4.541240] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:09:35.209 2025] [ 4.715748] hub 1-1:1.0: USB hub found [Fri Jan 03 14:09:35.209 2025] [ 4.720600] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:09:35.507 2025] [ 5.019019] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:09:35.554 2025] [ 5.061750] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:09:35.554 2025] [ 5.064996] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:09:35.572 2025] [ 5.065035] cfg80211: failed to load regulatory.db [Fri Jan 03 14:09:35.702 2025] [ 5.205086] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:09:35.715 2025] [ 5.205124] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:09:35.774 2025] [ 5.280084] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:09:35.783 2025] [ 5.280132] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:36.083 2025] [ 5.587510] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:09:36.091 2025] [ 5.587555] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:36.105 2025] [ 5.609597] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:09:36.109 2025] [ 5.609636] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:36.124 2025] [ 5.627022] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:09:36.185 2025] [ 5.690104] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:09:36.190 2025] [ 5.692991] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:36.333 2025] [ 5.837286] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:09:36.339 2025] [ 5.842110] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:09:36.345 2025] [ 5.845593] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:09:36.365 2025] [ 5.870833] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:09:36.374 2025] [ 5.870873] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:09:37.126 2025] *************************************************************** [Fri Jan 03 14:09:37.131 2025] *************************************************************** [Fri Jan 03 14:09:37.136 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:09:37.141 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:09:37.146 2025] bash [Fri Jan 03 14:09:37.146 2025] cifs-utils [Fri Jan 03 14:09:37.146 2025] dosfstools [Fri Jan 03 14:09:37.150 2025] grub-common [Fri Jan 03 14:09:37.154 2025] grub-editenv [Fri Jan 03 14:09:37.154 2025] grub-efi [Fri Jan 03 14:09:37.155 2025] less [Fri Jan 03 14:09:37.155 2025] lib32-libgcc1 [Fri Jan 03 14:09:37.159 2025] lib32-libstdc++6 [Fri Jan 03 14:09:37.159 2025] libdw1 [Fri Jan 03 14:09:37.159 2025] libelf1 [Fri Jan 03 14:09:37.159 2025] libgcc1 [Fri Jan 03 14:09:37.164 2025] libgdbm-compat4 [Fri Jan 03 14:09:37.164 2025] libgdbm6 [Fri Jan 03 14:09:37.164 2025] libgmp10 [Fri Jan 03 14:09:37.164 2025] libidn2-0 [Fri Jan 03 14:09:37.168 2025] libreadline8 [Fri Jan 03 14:09:37.168 2025] libstdc++6 [Fri Jan 03 14:09:37.168 2025] libunistring2 [Fri Jan 03 14:09:37.168 2025] libvte-2.91-0 [Fri Jan 03 14:09:37.173 2025] nettle [Fri Jan 03 14:09:37.173 2025] onboard [Fri Jan 03 14:09:37.173 2025] parted [Fri Jan 03 14:09:37.173 2025] rxvt-unicode [Fri Jan 03 14:09:37.173 2025] [Fri Jan 03 14:09:37.173 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:09:37.180 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:09:37.185 2025] the opkg remove command. i.e.: [Fri Jan 03 14:09:37.189 2025] opkg remove [Fri Jan 03 14:09:37.194 2025] Where is the name printed in the list above [Fri Jan 03 14:09:37.198 2025] [Fri Jan 03 14:09:37.199 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:09:37.203 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:09:37.207 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:09:37.216 2025] also remove the dependent packages as well [Fri Jan 03 14:09:37.217 2025] *************************************************************** [Fri Jan 03 14:09:37.226 2025] *************************************************************** [Fri Jan 03 14:09:42.416 2025] [Fri Jan 03 14:09:42.416 2025] _____ _____ _ _ [Fri Jan 03 14:09:42.422 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:09:42.427 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:09:42.432 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:09:42.437 2025] |___| |___| [Fri Jan 03 14:09:42.442 2025] [Fri Jan 03 14:09:42.443 2025] Arago Project am62xx-evm - [Fri Jan 03 14:09:42.447 2025] [Fri Jan 03 14:09:42.447 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:09:42.452 2025] [Fri Jan 03 14:09:42.452 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:09:42.723 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:09:42.908 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:09:42.916 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:09:43.091 2025] [ 12.594358] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:09:43.095 2025] [ 12.594382] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:09:43.102 2025] [ 12.594405] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.108 2025] [ 12.594469] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:09:43.115 2025] [ 12.594474] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:09:43.120 2025] [ 12.594482] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.130 2025] [ 12.594519] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:09:43.133 2025] [ 12.594524] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:09:43.139 2025] [ 12.594531] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.145 2025] [ 12.594566] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:09:43.151 2025] [ 12.594573] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:09:43.157 2025] [ 12.594579] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.163 2025] [ 12.594613] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:09:43.174 2025] [ 12.594618] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:09:43.176 2025] [ 12.594625] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.182 2025] [ 12.594659] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:09:43.188 2025] [ 12.594664] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:09:43.195 2025] [ 12.594671] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.201 2025] [ 12.594705] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:09:43.207 2025] [ 12.594710] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:09:43.213 2025] [ 12.594718] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:43.219 2025] [ 12.594752] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:09:43.224 2025] [ 12.594757] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:09:43.231 2025] [ 12.594765] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.366 2025] [ 14.882433] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:09:45.381 2025] [ 14.882459] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:09:45.381 2025] [ 14.882475] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.381 2025] [ 14.882522] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:09:45.397 2025] [ 14.882527] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:09:45.405 2025] [ 14.882536] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.413 2025] [ 14.882570] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:09:45.413 2025] [ 14.882575] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:09:45.413 2025] [ 14.882581] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.429 2025] [ 14.882617] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:09:45.429 2025] [ 14.882622] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:09:45.444 2025] [ 14.882629] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.444 2025] [ 14.882661] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:09:45.444 2025] [ 14.882666] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:09:45.460 2025] [ 14.882672] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.460 2025] [ 14.882708] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:09:45.460 2025] [ 14.882713] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:09:45.475 2025] [ 14.882720] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.475 2025] [ 14.882757] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:09:45.491 2025] [ 14.882762] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:09:45.491 2025] [ 14.882769] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.507 2025] [ 14.882804] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:09:45.507 2025] [ 14.882809] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:09:45.507 2025] [ 14.882817] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:45.875 2025] [ 15.376501] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:09:49.157 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:09:49.164 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:09:50.956 2025] [ 20.468320] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:09:50.956 2025] [ 20.468344] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:09:50.972 2025] [ 20.468370] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:50.972 2025] [ 20.468420] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:09:50.987 2025] [ 20.468426] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:09:50.987 2025] [ 20.468435] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:50.987 2025] [ 20.468470] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:09:51.003 2025] [ 20.468475] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:09:51.003 2025] [ 20.468482] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.019 2025] [ 20.468520] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:09:51.023 2025] [ 20.468525] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:09:51.023 2025] [ 20.468532] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.035 2025] [ 20.468566] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:09:51.035 2025] [ 20.468571] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:09:51.035 2025] [ 20.468582] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.050 2025] [ 20.468617] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:09:51.050 2025] [ 20.468622] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:09:51.066 2025] [ 20.468629] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.066 2025] [ 20.468665] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:09:51.082 2025] [ 20.468670] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:09:51.082 2025] [ 20.468677] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.082 2025] [ 20.468712] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:09:51.097 2025] [ 20.468717] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:09:51.097 2025] [ 20.468724] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.113 2025] [ 20.543603] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:09:51.113 2025] [ 20.543636] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:09:51.123 2025] [ 20.543660] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.129 2025] [ 20.543729] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:09:51.129 2025] [ 20.543735] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:09:51.144 2025] [ 20.543745] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.144 2025] [ 20.543793] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:09:51.144 2025] [ 20.543800] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:09:51.160 2025] [ 20.543808] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.160 2025] [ 20.543845] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:09:51.160 2025] [ 20.543850] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:09:51.176 2025] [ 20.543862] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.176 2025] [ 20.543896] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:09:51.191 2025] [ 20.543902] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:09:51.191 2025] [ 20.543909] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.191 2025] [ 20.543951] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:09:51.207 2025] [ 20.543956] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:09:51.207 2025] [ 20.543964] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.223 2025] [ 20.543999] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:09:51.223 2025] [ 20.544004] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:09:51.239 2025] [ 20.544013] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:09:51.239 2025] [ 20.544050] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:09:51.239 2025] [ 20.544056] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:09:51.254 2025] [ 20.544063] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:23.689 2025] [Fri Jan 03 14:10:23.689 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:10:23.708 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:10:23.758 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:10:23.779 2025] Trying to boot from MMC1 [Fri Jan 03 14:10:23.950 2025] Authentication passed [Fri Jan 03 14:10:23.956 2025] Authentication passed [Fri Jan 03 14:10:23.961 2025] Authentication passed [Fri Jan 03 14:10:23.999 2025] Authentication passed [Fri Jan 03 14:10:24.005 2025] Authentication passed [Fri Jan 03 14:10:24.009 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:10:24.010 2025] [Fri Jan 03 14:10:24.014 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:10:24.018 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:10:24.317 2025] [Fri Jan 03 14:10:24.317 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:10:24.324 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:10:24.366 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:10:24.368 2025] Error: could not access storage. [Fri Jan 03 14:10:24.372 2025] Trying to boot from MMC1 [Fri Jan 03 14:10:24.531 2025] Authentication passed [Fri Jan 03 14:10:24.536 2025] Authentication passed [Fri Jan 03 14:10:25.189 2025] [Fri Jan 03 14:10:25.189 2025] [Fri Jan 03 14:10:25.189 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:10:25.194 2025] [Fri Jan 03 14:10:25.194 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:10:25.201 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:10:25.202 2025] DRAM: 2 GiB [Fri Jan 03 14:10:25.443 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:10:25.447 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:10:25.460 2025] Loading Environment from MMC... OK [Fri Jan 03 14:10:25.661 2025] In: serial [Fri Jan 03 14:10:25.668 2025] Out: serial [Fri Jan 03 14:10:25.668 2025] Err: serial [Fri Jan 03 14:10:25.668 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:10:25.672 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:10:25.830 2025] switch to partitions #0, OK [Fri Jan 03 14:10:25.832 2025] mmc0(part 0) is current device [Fri Jan 03 14:10:25.975 2025] SD/MMC found on device 0 [Fri Jan 03 14:10:25.977 2025] Running eMMC boot ... [Fri Jan 03 14:10:25.999 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:10:26.000 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:10:26.004 2025] Importing environment from mmc0 ... [Fri Jan 03 14:10:26.225 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:10:26.248 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:10:26.251 2025] Working FDT set to 88000000 [Fri Jan 03 14:10:26.255 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:10:26.260 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:10:26.265 2025] Working FDT set to 88000000 [Fri Jan 03 14:10:26.288 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:10:26.295 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:10:26.302 2025] Working FDT set to 8feed000 [Fri Jan 03 14:10:26.311 2025] [Fri Jan 03 14:10:26.311 2025] Starting kernel ... [Fri Jan 03 14:10:26.316 2025] [Fri Jan 03 14:10:26.350 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:10:26.355 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:10:26.374 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:10:26.379 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:10:26.471 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:10:26.477 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:10:26.482 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:10:26.488 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:10:26.496 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:10:26.504 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:10:26.514 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:10:26.520 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:10:26.531 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:10:26.538 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:10:26.548 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:10:26.555 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:10:26.569 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:10:26.574 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:10:26.583 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:10:26.588 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:10:26.593 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:10:26.598 2025] [ 0.000000] Normal empty [Fri Jan 03 14:10:26.598 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:10:26.604 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:10:26.613 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:10:26.614 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:10:26.620 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:10:26.625 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:10:26.631 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:10:26.638 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:10:26.644 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:10:26.651 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:10:26.658 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:10:26.663 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:10:26.669 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:10:26.674 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:10:26.680 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:10:26.685 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:10:26.690 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:10:26.696 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:10:26.701 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:10:26.706 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:10:26.711 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:10:26.718 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:10:26.725 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:10:26.731 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:10:26.737 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:10:26.782 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:10:26.796 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:10:26.803 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:10:26.807 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:10:26.815 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:10:26.833 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:10:26.838 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:10:26.844 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:10:26.850 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:10:26.856 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:10:26.861 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:10:26.869 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:10:26.879 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:10:26.881 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:10:26.890 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:10:26.891 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:10:26.897 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:10:26.902 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:10:26.906 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:10:26.912 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:10:26.917 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:10:26.923 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:10:26.930 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:10:26.938 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:10:26.944 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:10:26.950 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:10:26.957 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:10:26.967 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:10:26.970 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:10:26.976 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:10:26.987 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:10:26.994 2025] [ 0.000249] Console: colour dummy device 80x25 [Fri Jan 03 14:10:27.005 2025] [ 0.528884] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:10:27.016 2025] [ 0.528894] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:10:27.018 2025] [ 0.528981] LSM: Security Framework initializing [Fri Jan 03 14:10:27.024 2025] [ 0.529118] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:10:27.033 2025] [ 0.529142] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:10:27.041 2025] [ 0.530835] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:10:27.043 2025] [ 0.530843] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:10:27.048 2025] [ 0.530886] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:10:27.058 2025] [ 0.583348] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:10:27.062 2025] [ 0.583616] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:10:27.071 2025] [ 0.583704] EFI services will not be available. [Fri Jan 03 14:10:27.076 2025] [ 0.583962] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:10:27.081 2025] [ 0.584736] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:10:27.086 2025] [ 0.584844] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:10:27.092 2025] [ 0.584860] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:10:27.099 2025] [ 0.584915] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:10:27.109 2025] [ 0.635006] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:10:27.110 2025] [ 0.635092] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:10:27.117 2025] [ 0.635106] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:10:27.124 2025] [ 0.635139] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:10:27.135 2025] [ 0.661024] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:10:27.136 2025] [ 0.661103] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:10:27.143 2025] [ 0.661116] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:10:27.151 2025] [ 0.661148] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:10:27.157 2025] [ 0.661206] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:10:27.162 2025] [ 0.661212] SMP: Total of 4 processors activated. [Fri Jan 03 14:10:27.167 2025] [ 0.695407] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:10:27.172 2025] [ 0.695410] CPU features: detected: CRC32 instructions [Fri Jan 03 14:10:27.178 2025] [ 0.695456] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:10:27.184 2025] [ 0.695458] alternatives: applying system-wide alternatives [Fri Jan 03 14:10:27.190 2025] [ 0.696956] devtmpfs: initialized [Fri Jan 03 14:10:27.194 2025] [ 0.708573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:10:27.201 2025] [ 0.708601] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:10:27.208 2025] [ 0.713769] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:10:27.215 2025] [ 0.714579] DMI not present or invalid. [Fri Jan 03 14:10:27.220 2025] [ 0.715109] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:10:27.225 2025] [ 0.729157] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:10:27.231 2025] [ 0.729440] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:10:27.238 2025] [ 0.729635] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:10:27.246 2025] [ 0.729777] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:10:27.252 2025] [ 0.729972] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:10:27.260 2025] [ 0.730606] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:10:27.266 2025] [ 0.730610] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:10:27.273 2025] [ 0.730853] ASID allocator initialised with 65536 entries [Fri Jan 03 14:10:27.278 2025] [ 0.745801] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:10:27.285 2025] [ 0.754946] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:10:27.292 2025] [ 0.754956] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:10:27.299 2025] [ 0.754961] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:10:27.306 2025] [ 0.754964] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:10:27.312 2025] [ 0.754967] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:10:27.319 2025] [ 0.754970] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:10:27.326 2025] [ 0.754973] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:10:27.332 2025] [ 0.754976] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:10:27.339 2025] [ 0.756132] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:10:27.347 2025] [ 0.756639] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:10:27.354 2025] [ 0.756646] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:10:27.365 2025] [ 0.756660] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:10:27.369 2025] [ 0.756674] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:10:27.378 2025] [ 0.756685] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.386 2025] [ 0.756691] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:10:27.392 2025] [ 0.756917] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:10:27.400 2025] [ 0.756922] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:10:27.406 2025] [ 0.756932] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:10:27.415 2025] [ 0.756944] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:10:27.423 2025] [ 0.756953] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.431 2025] [ 0.756957] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:10:27.439 2025] [ 0.757210] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:10:27.446 2025] [ 0.757215] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:10:27.453 2025] [ 0.757229] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:10:27.461 2025] [ 0.757241] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:10:27.474 2025] [ ‚rºªº’¢Êêreg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.477 2025] [ 1.00711[9] printk: console [ttyS2] printing thread started [Fri Jan 03 14:10:27.487 2025] 0.757253] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:10:27.493 2025] [ 1.007140] printk: console [ttyS2] enabled [Fri Jan 03 14:10:27.501 2025] [ 1.007144] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:10:27.501 2025] [ 1.019544] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:10:27.508 2025] [ 1.020773] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:10:27.515 2025] [ 1.020783] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:10:27.524 2025] [ 1.020798] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:10:27.532 2025] [ 1.020816] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:10:27.541 2025] [ 1.020828] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.549 2025] [ 1.020832] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:10:27.557 2025] [ 1.020862] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:10:27.566 2025] [ 1.021784] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:10:27.574 2025] [ 1.021793] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:10:27.581 2025] [ 1.021805] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:10:27.588 2025] [ 1.021820] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:10:27.594 2025] [ 1.021830] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.602 2025] [ 1.021834] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:10:27.608 2025] [ 1.024775] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:10:27.616 2025] [ 1.031626] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:10:27.623 2025] [ 1.038186] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:10:27.633 2025] [ 1.038611] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:10:27.633 2025] [ 1.038617] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:10:27.640 2025] [ 1.038632] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:10:27.650 2025] [ 1.038651] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:10:27.660 2025] [ 1.038665] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.668 2025] [ 1.038673] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:10:27.674 2025] [ 1.072072] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:10:27.681 2025] [ 1.072359] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:10:27.688 2025] [ 1.073129] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:10:27.695 2025] [ 1.073137] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:10:27.702 2025] [ 1.073154] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:10:27.713 2025] [ 1.073177] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:10:27.724 2025] [ 1.073192] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.732 2025] [ 1.073197] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:10:27.739 2025] [ 1.073948] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:10:27.747 2025] [ 1.073992] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:10:27.759 2025] [ 1.074274] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:10:27.768 2025] [ 1.074286] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:10:27.774 2025] [ 1.074291] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:10:27.781 2025] [ 1.075038] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:10:27.788 2025] [ 1.091595] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:10:27.794 2025] [ 1.096386] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:10:27.803 2025] [ 1.096451] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:10:27.810 2025] [ 1.096457] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:10:27.817 2025] [ 1.096474] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:10:27.824 2025] [ 1.096496] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:10:27.833 2025] [ 1.096507] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.841 2025] [ 1.096512] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:10:27.847 2025] [ 1.097429] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:10:27.853 2025] [ 1.097445] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:10:27.863 2025] [ 1.097461] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:10:27.868 2025] [ 1.097484] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:10:27.883 2025] [ 1.097494] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.889 2025] [ 1.097498] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:10:27.892 2025] [ 1.097504] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:10:27.898 2025] [ 1.097507] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:10:27.908 2025] [ 1.097516] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:10:27.914 2025] [ 1.097527] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:10:27.926 2025] [ 1.097536] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.929 2025] [ 1.097540] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:10:27.936 2025] [ 1.097865] mmc0: CQHCI version 5.10 [Fri Jan 03 14:10:27.941 2025] [ 1.097870] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:10:27.946 2025] [ 1.097876] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:10:27.952 2025] [ 1.097888] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:10:27.962 2025] [ 1.097908] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:10:27.974 2025] [ 1.097922] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:10:27.978 2025] [ 1.097926] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:10:27.984 2025] [ 1.098087] mmc1: CQHCI version 5.10 [Fri Jan 03 14:10:27.989 2025] [ 1.098336] mmc2: CQHCI version 5.10 [Fri Jan 03 14:10:27.994 2025] [ 1.101340] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:10:28.000 2025] [ 1.103869] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:10:28.010 2025] [ 1.106896] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:10:28.015 2025] [ 1.107096] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:10:28.024 2025] [ 1.107159] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:10:28.033 2025] [ 1.110408] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:10:28.046 2025] [ 1.110624] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:10:28.058 2025] [ 1.110685] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:10:28.066 2025] [ 1.112261] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:10:28.072 2025] [ 1.112274] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:10:28.079 2025] [ 1.112294] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:10:28.088 2025] [ 1.112310] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:10:28.097 2025] [ 1.112322] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:10:28.101 2025] [ 1.112326] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:10:28.107 2025] [ 1.112335] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:10:28.116 2025] [ 1.112349] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:10:28.125 2025] [ 1.112358] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:10:28.133 2025] [ 1.112363] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:10:28.140 2025] [ 1.112788] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:10:28.146 2025] [ 1.112793] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:10:28.153 2025] [ 1.112805] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:10:28.161 2025] [ 1.112816] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:10:28.172 2025] [ 1.112820] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:10:28.173 2025] [ 1.113387] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:10:28.181 2025] [ 1.113401] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:10:28.188 2025] [ 1.113405] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:10:28.193 2025] [ 1.113504] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:10:28.205 2025] [ 1.113515] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:10:28.211 2025] [ 1.113518] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:10:28.213 2025] [ 1.113575] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:10:28.222 2025] [ 1.113586] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:10:28.229 2025] [ 1.113589] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:10:28.234 2025] [ 1.114369] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:10:28.241 2025] [ 1.117062] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:10:28.248 2025] [ 1.129394] ALSA device list: [Fri Jan 03 14:10:28.253 2025] [ 1.129405] No soundcards found. [Fri Jan 03 14:10:28.258 2025] [ 1.134661] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:10:28.264 2025] [ 1.139985] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:10:28.270 2025] [ 1.149879] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:10:28.277 2025] [ 1.150047] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:10:28.285 2025] [ 1.195931] mmc1: new MMC card at address 0001 [Fri Jan 03 14:10:28.290 2025] [ 1.196787] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:10:28.295 2025] [ 1.204852] mmcblk1: p1 [Fri Jan 03 14:10:28.299 2025] [ 1.205645] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:10:28.305 2025] [ 1.207349] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:10:28.310 2025] [ 1.208702] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:10:28.316 2025] [ 1.287920] mmc0: Command Queue Engine enabled [Fri Jan 03 14:10:28.320 2025] [ 1.287936] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:10:28.326 2025] [ 1.288746] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:10:28.330 2025] [ 1.292766] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:10:28.334 2025] [ 1.293799] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:10:28.338 2025] [ 1.295185] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:10:28.343 2025] [ 1.296275] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:10:28.352 2025] [ 1.314743] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:10:28.352 2025] [ 1.315121] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:28.363 2025] [ 1.315203] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:10:28.366 2025] [ 1.315358] devtmpfs: mounted [Fri Jan 03 14:10:28.371 2025] [ 1.316789] Freeing unused kernel memory: 1856K [Fri Jan 03 14:10:28.377 2025] [ 1.316908] Run /sbin/init as init process [Fri Jan 03 14:10:28.377 2025] [ 1.316912] with arguments: [Fri Jan 03 14:10:28.382 2025] [ 1.316913] /sbin/init [Fri Jan 03 14:10:28.386 2025] [ 1.316915] with environment: [Fri Jan 03 14:10:28.391 2025] [ 1.316916] HOME=/ [Fri Jan 03 14:10:28.395 2025] [ 1.316918] TERM=linux [Fri Jan 03 14:10:28.395 2025] [ 1.316919] syntec_extend= [Fri Jan 03 14:10:28.400 2025] [ 1.407789] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:10:28.404 2025] [ 1.434949] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:10:28.409 2025] [ 1.436147] Segment Routing with IPv6 [Fri Jan 03 14:10:28.413 2025] [ 1.436184] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:10:28.418 2025] [ 1.474874] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:10:28.445 2025] [ 1.475586] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:10:28.450 2025] [ 1.478834] systemd[1]: Hostname set to . [Fri Jan 03 14:10:28.455 2025] [ 1.596587] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:10:28.478 2025] [ 1.897103] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:10:28.497 2025] [ 1.899935] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:10:28.514 2025] [ 1.962700] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:10:28.522 2025] [ 1.966025] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:10:28.528 2025] [ 1.967682] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:10:28.534 2025] [ 1.968224] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:10:28.540 2025] [ 1.968571] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:10:28.548 2025] [ 1.968773] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:10:28.555 2025] [ 1.969194] systemd[1]: Reached target Path Units. [Fri Jan 03 14:10:28.560 2025] [ 1.969300] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:10:28.566 2025] [ 1.969364] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:10:28.572 2025] [ 1.969447] systemd[1]: Reached target Swaps. [Fri Jan 03 14:10:28.577 2025] [ 1.973701] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:10:28.582 2025] [ 1.973882] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:10:28.587 2025] [ 1.980084] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:10:28.593 2025] [ 1.980550] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:10:28.599 2025] [ 1.981388] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:10:28.605 2025] [ 1.981969] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:10:28.615 2025] [ 1.982588] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:10:28.616 2025] [ 1.983372] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:10:28.621 2025] [ 1.985254] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:10:28.630 2025] [ 1.985763] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:10:28.636 2025] [ 1.986246] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:10:28.642 2025] [ 2.057737] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:10:28.653 2025] [ 2.061805] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:10:28.664 2025] [ 2.066231] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:10:28.670 2025] [ 2.067137] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:10:28.688 2025] [ 2.068359] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:10:28.693 2025] [ 2.072518] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:10:28.700 2025] [ 2.082884] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:10:28.706 2025] [ 2.087977] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:10:28.712 2025] [ 2.093548] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:10:28.718 2025] [ 2.098409] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:10:28.723 2025] [ 2.106021] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:10:28.729 2025] [ 2.107441] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:10:28.739 2025] [ 2.109147] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:10:28.752 2025] [ 2.109185] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:10:28.761 2025] [ 2.111577] fuse: init (API version 7.37) [Fri Jan 03 14:10:28.767 2025] [ 2.113022] systemd[1]: Starting Journal Service... [Fri Jan 03 14:10:28.772 2025] [ 2.122915] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:10:28.777 2025] [ 2.127880] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:10:28.783 2025] [ 2.133181] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:10:28.791 2025] [ 2.138030] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:10:28.798 2025] [ 2.153461] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:10:28.803 2025] [ 2.161677] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:10:28.809 2025] [ 2.168476] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:10:28.815 2025] [ 2.178355] systemd[1]: Started RPC Bind. [Fri Jan 03 14:10:28.816 2025] [ 2.182347] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:10:28.825 2025] [ 2.184628] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:10:28.831 2025] [ 2.185540] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:10:28.833 2025] [ 2.186413] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:10:28.840 2025] [ 2.187922] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:10:28.845 2025] [ 2.189798] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:10:28.852 2025] [ 2.190655] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:10:28.858 2025] [ 2.192331] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:10:28.864 2025] [ 2.193185] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:10:28.869 2025] [ 2.199954] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:10:28.879 2025] [ 2.204905] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:10:28.881 2025] [ 2.204922] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:10:28.887 2025] [ 2.208562] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:10:28.892 2025] [ 2.210039] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:10:28.904 2025] [ 2.211296] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:10:28.907 2025] [ 2.247591] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:10:28.914 2025] [ 2.251837] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:10:28.919 2025] [ 2.254806] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:10:28.931 2025] [ 2.255373] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:10:28.948 2025] [ 2.266251] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:10:28.950 2025] [ 2.266721] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:10:28.960 2025] [ 2.285133] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:10:28.967 2025] [ 2.290854] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:10:28.973 2025] [ 2.291782] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:10:28.978 2025] [ 2.292999] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:10:28.984 2025] [ 2.327761] systemd[1]: Started Journal Service. [Fri Jan 03 14:10:28.989 2025] [ 2.361234] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:10:29.273 2025] [ 2.793189] random: crng init done [Fri Jan 03 14:10:29.328 2025] [ 2.856461] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:10:29.332 2025] [ 2.856482] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:10:29.343 2025] [ 2.856498] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:10:29.353 2025] [ 2.856526] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:10:29.361 2025] [ 2.856544] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:10:29.373 2025] [ 2.860745] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:10:29.383 2025] [ 2.860763] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:10:29.392 2025] [ 2.860796] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:10:29.426 2025] [ 2.860828] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:10:29.448 2025] [ 2.860839] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:10:29.470 2025] [ 2.860843] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:10:29.486 2025] [ 2.860854] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:10:29.509 2025] [ 2.860867] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:10:29.515 2025] [ 2.860874] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:10:29.526 2025] [ 2.860878] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:10:29.533 2025] [ 2.860888] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:10:29.567 2025] [ 2.860898] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:10:29.574 2025] [ 2.875174] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:10:29.584 2025] [ 2.875195] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:10:29.601 2025] [ 2.875228] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:10:29.633 2025] [ 2.875231] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:10:29.664 2025] [ 2.875260] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:10:29.664 2025] [ 2.921887] mc: Linux media interface: v0.10 [Fri Jan 03 14:10:29.680 2025] [ 2.942324] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:10:29.696 2025] [ 2.943475] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:40:46 UTC (1681065646) [Fri Jan 03 14:10:29.712 2025] [ 2.948789] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:10:29.727 2025] [ 2.948816] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:10:29.759 2025] [ 2.955011] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:10:29.775 2025] [ 3.082380] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:10:29.775 2025] [ 3.083158] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:10:29.790 2025] [ 3.084159] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:10:29.790 2025] [ 3.084511] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:10:29.806 2025] [ 3.086128] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:10:29.806 2025] [ 3.086166] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:10:29.822 2025] [ 3.086203] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:10:29.822 2025] [ 3.086210] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:10:29.838 2025] [ 3.294085] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:10:29.869 2025] [ 3.410417] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:10:29.884 2025] [ 3.411539] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:10:29.900 2025] [ 3.411579] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:10:29.900 2025] [ 3.411585] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:10:29.916 2025] [ 3.411606] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:10:29.938 2025] [ 3.411634] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:10:29.963 2025] [ 3.411654] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:10:29.963 2025] [ 3.411660] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:10:29.979 2025] [ 3.430194] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:10:29.994 2025] [ 3.430230] Get kick_gpio number= (418) [Fri Jan 03 14:10:30.010 2025] [ 3.448805] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:10:30.026 2025] [ 3.450206] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:10:30.042 2025] [ 3.450424] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:10:30.057 2025] [ 3.451267] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:10:30.073 2025] [ 3.451432] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:10:30.073 2025] [ 3.478148] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:10:30.073 2025] [ 3.478202] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:10:30.088 2025] [ 3.479350] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:10:30.104 2025] [ 3.479413] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:10:30.104 2025] [ 3.479422] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:10:30.120 2025] [ 3.483227] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:10:30.120 2025] [ 3.483511] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:10:30.717 2025] [ 4.253363] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:10:30.795 2025] [ 4.336012] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:10:30.811 2025] [ 4.338638] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:10:30.827 2025] [ 4.338682] cfg80211: failed to load regulatory.db [Fri Jan 03 14:10:31.043 2025] [ 4.569725] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:10:31.047 2025] [ 4.569763] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:10:31.062 2025] [ 4.595518] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:10:31.078 2025] [ 4.595543] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:10:31.109 2025] [ 4.595560] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:10:31.157 2025] [ 4.595590] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:10:31.172 2025] [ 4.595612] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:10:31.188 2025] [ 4.595618] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:10:31.219 2025] [ 4.613092] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:10:31.251 2025] [ 4.661052] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:10:31.314 2025] [ 4.663501] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:10:31.408 2025] [ 4.941230] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:10:31.424 2025] [ 4.962156] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:10:31.456 2025] [ 4.962227] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:10:31.456 2025] [ 4.962454] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:10:31.471 2025] [ 4.962464] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:10:31.487 2025] [ 4.978362] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:10:31.487 2025] [ 4.981120] hub 1-0:1.0: USB hub found [Fri Jan 03 14:10:31.503 2025] [ 4.981175] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:10:31.695 2025] [ 5.222181] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:10:31.868 2025] [ 5.395209] hub 1-1:1.0: USB hub found [Fri Jan 03 14:10:31.871 2025] [ 5.397202] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:10:31.973 2025] [ 5.498334] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:10:31.976 2025] [ 5.498379] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:32.048 2025] [ 5.575612] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:10:32.058 2025] [ 5.575664] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:32.090 2025] [ 5.617584] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:10:32.098 2025] [ 5.617634] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:32.145 2025] [ 5.673638] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:10:32.215 2025] [ 5.742023] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:10:32.219 2025] [ 5.742865] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:32.231 2025] [ 5.752392] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:10:32.272 2025] [ 5.800736] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:10:32.289 2025] [ 5.800772] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:10:32.611 2025] ***************************************************************[ 6.141960] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:10:32.621 2025] [ 6.143308] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:10:32.631 2025] [Fri Jan 03 14:10:32.631 2025] *************************************************************** [Fri Jan 03 14:10:32.636 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:10:32.641 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:10:32.646 2025] bash [Fri Jan 03 14:10:32.646 2025] cifs-utils [Fri Jan 03 14:10:32.647 2025] dosfstools [Fri Jan 03 14:10:32.650 2025] grub-common [Fri Jan 03 14:10:32.650 2025] grub-editenv [Fri Jan 03 14:10:32.655 2025] grub-efi [Fri Jan 03 14:10:32.655 2025] less [Fri Jan 03 14:10:32.655 2025] lib32-libgcc1 [Fri Jan 03 14:10:32.655 2025] lib32-libstdc++6 [Fri Jan 03 14:10:32.659 2025] libdw1 [Fri Jan 03 14:10:32.659 2025] libelf1 [Fri Jan 03 14:10:32.659 2025] libgcc1 [Fri Jan 03 14:10:32.659 2025] libgdbm-compat4 [Fri Jan 03 14:10:32.664 2025] libgdbm6 [Fri Jan 03 14:10:32.664 2025] libgmp10 [Fri Jan 03 14:10:32.664 2025] libidn2-0 [Fri Jan 03 14:10:32.668 2025] libreadline8 [Fri Jan 03 14:10:32.668 2025] libstdc++6 [Fri Jan 03 14:10:32.668 2025] libunistring2 [Fri Jan 03 14:10:32.668 2025] libvte-2.91-0 [Fri Jan 03 14:10:32.672 2025] nettle [Fri Jan 03 14:10:32.672 2025] onboard [Fri Jan 03 14:10:32.672 2025] parted [Fri Jan 03 14:10:32.672 2025] rxvt-unicode [Fri Jan 03 14:10:32.676 2025] [Fri Jan 03 14:10:32.677 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:10:32.681 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:10:32.686 2025] the opkg remove command. i.e.: [Fri Jan 03 14:10:32.690 2025] opkg remove [Fri Jan 03 14:10:32.690 2025] Where is the name printed in the list above [Fri Jan 03 14:10:32.696 2025] [Fri Jan 03 14:10:32.696 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:10:32.700 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:10:32.706 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:10:32.711 2025] also remove the dependent packages as well [Fri Jan 03 14:10:32.716 2025] *************************************************************** [Fri Jan 03 14:10:32.721 2025] *************************************************************** [Fri Jan 03 14:10:37.763 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:10:37.774 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:10:37.964 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:10:37.964 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:10:38.136 2025] [ 11.674930] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:10:38.152 2025] [ 11.674958] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:10:38.152 2025] [ 11.674978] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.152 2025] [ 11.675038] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:10:38.168 2025] [ 11.675044] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:10:38.168 2025] [ 11.675051] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.183 2025] [ 11.675210] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:10:38.183 2025] [ 11.675217] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:10:38.183 2025] [ 11.675225] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.199 2025] [ 11.675266] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:10:38.199 2025] [ 11.675271] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:10:38.199 2025] [ 11.675278] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.215 2025] [ 11.675314] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:10:38.215 2025] [ 11.675320] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:10:38.230 2025] [ 11.675330] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.230 2025] [ 11.675365] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:10:38.246 2025] [ 11.675370] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:10:38.246 2025] [ 11.675377] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.261 2025] [ 11.675414] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:10:38.265 2025] [ 11.675419] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:10:38.277 2025] [ 11.675426] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.277 2025] [ 11.675459] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:10:38.277 2025] [ 11.675464] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:10:38.293 2025] [ 11.675475] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:38.324 2025] [Fri Jan 03 14:10:38.324 2025] _____ _____ _ _ [Fri Jan 03 14:10:38.340 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:10:38.340 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:10:38.340 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:10:38.356 2025] |___| |___| [Fri Jan 03 14:10:38.356 2025] [Fri Jan 03 14:10:38.356 2025] Arago Project am62xx-evm - [Fri Jan 03 14:10:38.356 2025] [Fri Jan 03 14:10:38.356 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:10:38.365 2025] [Fri Jan 03 14:10:38.365 2025] am62xx-evm login: [ 13.973764] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:10:40.451 2025] [ 13.973785] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:10:40.457 2025] [ 13.973808] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.464 2025] [ 13.973854] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:10:40.469 2025] [ 13.973859] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:10:40.475 2025] [ 13.973866] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.481 2025] [ 13.973903] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:10:40.487 2025] [ 13.973908] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:10:40.493 2025] [ 13.973914] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.499 2025] [ 13.973947] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:10:40.505 2025] [ 13.973953] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:10:40.515 2025] [ 13.973961] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.518 2025] [ 13.973994] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:10:40.524 2025] [ 13.973999] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:10:40.531 2025] [ 13.974006] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.537 2025] [ 13.974040] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:10:40.543 2025] [ 13.974045] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:10:40.549 2025] [ 13.974159] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.555 2025] [ 13.974204] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:10:40.561 2025] [ 13.974210] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:10:40.571 2025] [ 13.974218] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.577 2025] [ 13.974257] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:10:40.580 2025] [ 13.974262] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:10:40.585 2025] [ 13.974270] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:40.934 2025] [ 14.461197] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:10:44.253 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:10:44.258 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:10:46.074 2025] [ 19.601609] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:10:46.079 2025] [ 19.601632] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:10:46.086 2025] [ 19.601651] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.092 2025] [ 19.601709] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:10:46.098 2025] [ 19.601715] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:10:46.104 2025] [ 19.601722] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.113 2025] [ 19.601763] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:10:46.119 2025] [ 19.601769] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:10:46.125 2025] [ 19.601777] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.128 2025] [ 19.601818] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:10:46.134 2025] [ 19.601823] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:10:46.141 2025] [ 19.601830] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.147 2025] [ 19.601864] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:10:46.153 2025] [ 19.601869] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:10:46.159 2025] [ 19.601877] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.169 2025] [ 19.601913] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:10:46.171 2025] [ 19.601918] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:10:46.178 2025] [ 19.601924] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.187 2025] [ 19.601958] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:10:46.192 2025] [ 19.601964] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:10:46.202 2025] [ 19.601970] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.205 2025] [ 19.602004] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:10:46.211 2025] [ 19.602010] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:10:46.217 2025] [ 19.602016] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.222 2025] [ 19.677663] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:10:46.229 2025] [ 19.677688] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:10:46.235 2025] [ 19.677709] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.241 2025] [ 19.677773] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:10:46.247 2025] [ 19.677779] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:10:46.252 2025] [ 19.677789] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.259 2025] [ 19.677831] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:10:46.265 2025] [ 19.677836] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:10:46.270 2025] [ 19.677843] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.280 2025] [ 19.677884] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:10:46.283 2025] [ 19.677889] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:10:46.289 2025] [ 19.677896] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.296 2025] [ 19.677930] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:10:46.302 2025] [ 19.677934] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:10:46.308 2025] [ 19.677942] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.314 2025] [ 19.677978] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:10:46.324 2025] [ 19.677983] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:10:46.327 2025] [ 19.677990] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.333 2025] [ 19.678030] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:10:46.339 2025] [ 19.678035] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:10:46.346 2025] [ 19.678042] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:10:46.352 2025] [ 19.678157] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:10:46.359 2025] [ 19.678165] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:10:46.364 2025] [ 19.678176] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:17.852 2025] [Fri Jan 03 14:11:17.853 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:11:17.871 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:11:17.922 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:11:17.944 2025] Trying to boot from MMC1 [Fri Jan 03 14:11:18.114 2025] Authentication passed [Fri Jan 03 14:11:18.119 2025] Authentication passed [Fri Jan 03 14:11:18.126 2025] Authentication passed [Fri Jan 03 14:11:18.160 2025] Authentication passed [Fri Jan 03 14:11:18.167 2025] Authentication passed [Fri Jan 03 14:11:18.173 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:11:18.175 2025] [Fri Jan 03 14:11:18.179 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:11:18.182 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:11:18.478 2025] [Fri Jan 03 14:11:18.479 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:11:18.485 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:11:18.526 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:11:18.530 2025] Error: could not access storage. [Fri Jan 03 14:11:18.535 2025] Trying to boot from MMC1 [Fri Jan 03 14:11:18.691 2025] Authentication passed [Fri Jan 03 14:11:18.698 2025] Authentication passed [Fri Jan 03 14:11:19.356 2025] [Fri Jan 03 14:11:19.356 2025] [Fri Jan 03 14:11:19.356 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:11:19.356 2025] [Fri Jan 03 14:11:19.356 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:11:19.362 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:11:19.368 2025] DRAM: 2 GiB [Fri Jan 03 14:11:19.603 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:11:19.610 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:11:19.617 2025] Loading Environment from MMC... OK [Fri Jan 03 14:11:19.823 2025] In: serial [Fri Jan 03 14:11:19.823 2025] Out: serial [Fri Jan 03 14:11:19.827 2025] Err: serial [Fri Jan 03 14:11:19.828 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:11:19.828 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:11:19.991 2025] switch to partitions #0, OK [Fri Jan 03 14:11:19.995 2025] mmc0(part 0) is current device [Fri Jan 03 14:11:20.138 2025] SD/MMC found on device 0 [Fri Jan 03 14:11:20.140 2025] Running eMMC boot ... [Fri Jan 03 14:11:20.157 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:11:20.161 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:11:20.166 2025] Importing environment from mmc0 ... [Fri Jan 03 14:11:20.387 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:11:20.409 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:11:20.417 2025] Working FDT set to 88000000 [Fri Jan 03 14:11:20.419 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:11:20.423 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:11:20.428 2025] Working FDT set to 88000000 [Fri Jan 03 14:11:20.449 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:11:20.460 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:11:20.465 2025] Working FDT set to 8feed000 [Fri Jan 03 14:11:20.474 2025] [Fri Jan 03 14:11:20.474 2025] Starting kernel ... [Fri Jan 03 14:11:20.481 2025] [Fri Jan 03 14:11:20.513 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:11:20.518 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:11:20.538 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:11:20.543 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:11:20.634 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:11:20.638 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:11:20.643 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:11:20.651 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:11:20.659 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:11:20.668 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:11:20.676 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:11:20.683 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:11:20.693 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:11:20.701 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:11:20.710 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:11:20.719 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:11:20.733 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:11:20.736 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:11:20.747 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:11:20.752 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:11:20.757 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:11:20.761 2025] [ 0.000000] Normal empty [Fri Jan 03 14:11:20.766 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:11:20.771 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:11:20.775 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:11:20.780 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:11:20.785 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:11:20.791 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:11:20.798 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:11:20.807 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:11:20.808 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:11:20.816 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:11:20.821 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:11:20.826 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:11:20.833 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:11:20.838 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:11:20.843 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:11:20.849 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:11:20.854 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:11:20.859 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:11:20.866 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:11:20.866 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:11:20.872 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:11:20.881 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:11:20.887 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:11:20.892 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:11:20.899 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:11:20.946 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:11:20.958 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:11:20.968 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:11:20.972 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:11:20.978 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:11:20.995 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:11:21.000 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:11:21.006 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:11:21.012 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:11:21.019 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:11:21.025 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:11:21.032 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:11:21.042 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:11:21.043 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:11:21.050 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:11:21.057 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:11:21.058 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:11:21.064 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:11:21.069 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:11:21.074 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:11:21.082 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:11:21.088 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:11:21.093 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:11:21.101 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:11:21.106 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:11:21.113 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:11:21.119 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:11:21.131 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:11:21.137 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:11:21.139 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:11:21.150 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:11:21.158 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:11:21.168 2025] [ 0.528888] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:11:21.179 2025] [ 0.528899] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:11:21.181 2025] [ 0.528983] LSM: Security Framework initializing [Fri Jan 03 14:11:21.187 2025] [ 0.529119] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:11:21.193 2025] [ 0.529143] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:11:21.203 2025] [ 0.530836] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:11:21.205 2025] [ 0.530843] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:11:21.211 2025] [ 0.530886] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:11:21.218 2025] [ 0.583343] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:11:21.226 2025] [ 0.583591] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:11:21.234 2025] [ 0.583678] EFI services will not be available. [Fri Jan 03 14:11:21.239 2025] [ 0.583939] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:11:21.244 2025] [ 0.584706] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:11:21.250 2025] [ 0.584815] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:11:21.256 2025] [ 0.584832] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:11:21.266 2025] [ 0.584890] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:11:21.269 2025] [ 0.634974] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:11:21.273 2025] [ 0.635064] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:11:21.280 2025] [ 0.635076] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:11:21.288 2025] [ 0.635110] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:11:21.299 2025] [ 0.660979] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:11:21.301 2025] [ 0.661061] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:11:21.306 2025] [ 0.661073] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:11:21.314 2025] [ 0.661106] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:11:21.320 2025] [ 0.661163] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:11:21.325 2025] [ 0.661169] SMP: Total of 4 processors activated. [Fri Jan 03 14:11:21.330 2025] [ 0.661173] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:11:21.336 2025] [ 0.700604] CPU features: detected: CRC32 instructions [Fri Jan 03 14:11:21.341 2025] [ 0.700651] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:11:21.348 2025] [ 0.700653] alternatives: applying system-wide alternatives [Fri Jan 03 14:11:21.353 2025] [ 0.702195] devtmpfs: initialized [Fri Jan 03 14:11:21.358 2025] [ 0.713837] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:11:21.366 2025] [ 0.713864] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:11:21.371 2025] [ 0.719173] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:11:21.376 2025] [ 0.719917] DMI not present or invalid. [Fri Jan 03 14:11:21.385 2025] [ 0.720446] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:11:21.392 2025] [ 0.741310] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:11:21.399 2025] [ 0.741601] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:11:21.404 2025] [ 0.741794] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:11:21.410 2025] [ 0.741880] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:11:21.416 2025] [ 0.742037] audit: type=2000 audit(0.739:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:11:21.423 2025] [ 0.742666] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:11:21.430 2025] [ 0.742671] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:11:21.437 2025] [ 0.742934] ASID allocator initialised with 65536 entries [Fri Jan 03 14:11:21.443 2025] [ 0.757825] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:11:21.449 2025] [ 0.766924] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:11:21.455 2025] [ 0.766935] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:11:21.461 2025] [ 0.766939] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:11:21.468 2025] [ 0.766941] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:11:21.475 2025] [ 0.766945] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:11:21.482 2025] [ 0.766948] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:11:21.488 2025] [ 0.766951] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:11:21.494 2025] [ 0.766954] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:11:21.500 2025] [ 0.768152] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:11:21.510 2025] [ 0.768616] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:11:21.517 2025] [ 0.768623] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:11:21.523 2025] [ 0.768636] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:11:21.533 2025] [ 0.768651] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:11:21.540 2025] [ 0.768661] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.549 2025] [ 0.768667] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:11:21.555 2025] [ 0.768904] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:11:21.564 2025] [ 0.768909] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:11:21.569 2025] [ 0.768922] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:11:21.579 2025] [ 0.768934] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:11:21.588 2025] [ 0.768943] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.594 2025] [ 0.768947] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:11:21.601 2025] [ 0.769200] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:11:21.608 2025] [ 0.769205] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:11:21.619 2025] [ 0.769214] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:11:21.624 2025] [ 0.769227] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:11:21.633 2025] [ 0.769235] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.641 2025] [ 0.769239] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:11:21.649 2025] [ 0.769448] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:11:21.655 2025] [ 0.769453] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:11:21.663 2025] [ 0.769462] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:11:21.673 2025] [ 1[.036714] printk: console [ttyS2] printing thread started [Fri Jan 03 14:11:21.676 2025] 0.769474] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:11:21.684 2025] [ 1.036734] printk: console [ttyS2] enabled [Fri Jan 03 14:11:21.689 2025] [ 1.036738] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:11:21.694 2025] [ 1.050819] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:11:21.701 2025] [ 1.051988] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:11:21.708 2025] [ 1.051996] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:11:21.716 2025] [ 1.052008] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:11:21.723 2025] [ 1.052025] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:11:21.734 2025] [ 1.052036] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.740 2025] [ 1.052040] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:11:21.748 2025] [ 1.052070] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:11:21.759 2025] [ 1.053010] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:11:21.762 2025] [ 1.053018] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:11:21.769 2025] [ 1.053029] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:11:21.777 2025] [ 1.053043] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:11:21.786 2025] [ 1.053053] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.793 2025] [ 1.053056] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:11:21.803 2025] [ 1.056061] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:11:21.807 2025] [ 1.062651] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:11:21.815 2025] [ 1.069307] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:11:21.822 2025] [ 1.069732] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:11:21.827 2025] [ 1.069738] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:11:21.833 2025] [ 1.069752] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:11:21.843 2025] [ 1.069770] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:11:21.854 2025] [ 1.069784] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.865 2025] [ 1.069790] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:11:21.867 2025] [ 1.103124] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:11:21.874 2025] [ 1.103411] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:11:21.883 2025] [ 1.104227] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:11:21.888 2025] [ 1.104236] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:11:21.899 2025] [ 1.104250] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:11:21.907 2025] [ 1.104280] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:11:21.918 2025] [ 1.104294] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:11:21.926 2025] [ 1.104299] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:11:21.933 2025] [ 1.105039] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:11:21.940 2025] [ 1.105088] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:11:21.953 2025] [ 1.105353] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:11:21.959 2025] [ 1.105365] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:11:21.966 2025] [ 1.105370] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:11:21.972 2025] [ 1.106178] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:11:21.981 2025] [ 1.122627] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:11:21.986 2025] [ 1.127472] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:11:21.992 2025] [ 1.127489] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:11:21.999 2025] [ 1.127486] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:11:22.009 2025] [ 1.127504] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:11:22.019 2025] [ 1.127537] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:11:22.028 2025] [ 1.127548] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:11:22.035 2025] [ 1.127552] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:11:22.040 2025] [ 1.127576] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:11:22.048 2025] [ 1.127582] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:11:22.053 2025] [ 1.127592] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:11:22.068 2025] [ 1.127606] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:11:22.077 2025] [ 1.127616] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:11:22.081 2025] [ 1.127620] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:11:22.087 2025] [ 1.127625] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:11:22.092 2025] [ 1.127629] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:11:22.100 2025] [ 1.127637] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:11:22.107 2025] [ 1.127649] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:11:22.118 2025] [ 1.127657] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:11:22.123 2025] [ 1.127661] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:11:22.131 2025] [ 1.128344] mmc1: CQHCI version 5.10 [Fri Jan 03 14:11:22.137 2025] [ 1.128990] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:11:22.142 2025] [ 1.129005] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:11:22.149 2025] [ 1.129026] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:11:22.156 2025] [ 1.129044] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:11:22.166 2025] [ 1.129055] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:11:22.173 2025] [ 1.129060] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:11:22.180 2025] [ 1.129457] mmc0: CQHCI version 5.10 [Fri Jan 03 14:11:22.186 2025] [ 1.129772] mmc2: CQHCI version 5.10 [Fri Jan 03 14:11:22.186 2025] [ 1.131569] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:11:22.196 2025] [ 1.134074] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:11:22.208 2025] [ 1.137084] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:11:22.213 2025] [ 1.137303] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:11:22.216 2025] [ 1.137365] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:11:22.222 2025] [ 1.140455] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:11:22.228 2025] [ 1.140672] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:11:22.234 2025] [ 1.140737] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:11:22.240 2025] [ 1.142356] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:11:22.248 2025] [ 1.142369] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:11:22.255 2025] [ 1.142389] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:11:22.265 2025] [ 1.142405] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:11:22.274 2025] [ 1.142416] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:11:22.278 2025] [ 1.142420] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:11:22.285 2025] [ 1.142429] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:11:22.293 2025] [ 1.142442] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:11:22.303 2025] [ 1.142451] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:11:22.311 2025] [ 1.142456] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:11:22.321 2025] [ 1.142886] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:11:22.323 2025] [ 1.142891] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:11:22.336 2025] [ 1.142903] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:11:22.341 2025] [ 1.142914] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:11:22.344 2025] [ 1.142918] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:11:22.352 2025] [ 1.143430] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:11:22.359 2025] [ 1.143445] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:11:22.366 2025] [ 1.143452] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:11:22.371 2025] [ 1.143543] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:11:22.380 2025] [ 1.143555] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:11:22.386 2025] [ 1.143558] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:11:22.391 2025] [ 1.143624] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:11:22.400 2025] [ 1.143635] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:11:22.406 2025] [ 1.143638] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:11:22.411 2025] [ 1.144343] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:11:22.418 2025] [ 1.146998] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:11:22.425 2025] [ 1.159161] ALSA device list: [Fri Jan 03 14:11:22.432 2025] [ 1.159173] No soundcards found. [Fri Jan 03 14:11:22.432 2025] [ 1.164252] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:11:22.439 2025] [ 1.169172] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:11:22.448 2025] [ 1.176740] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:11:22.455 2025] [ 1.176933] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:11:22.463 2025] [ 1.222790] mmc1: new MMC card at address 0001 [Fri Jan 03 14:11:22.468 2025] [ 1.223579] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:11:22.474 2025] [ 1.231559] mmcblk1: p1 [Fri Jan 03 14:11:22.474 2025] [ 1.232369] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:11:22.481 2025] [ 1.234040] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:11:22.486 2025] [ 1.235365] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:11:22.491 2025] [ 1.306319] mmc0: Command Queue Engine enabled [Fri Jan 03 14:11:22.498 2025] [ 1.306337] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:11:22.502 2025] [ 1.307059] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:11:22.509 2025] [ 1.310922] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:11:22.514 2025] [ 1.312004] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:11:22.519 2025] [ 1.313329] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:11:22.523 2025] [ 1.314451] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:11:22.528 2025] [ 1.330563] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:11:22.534 2025] [ 1.330935] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:22.540 2025] [ 1.331015] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:11:22.547 2025] [ 1.331235] devtmpfs: mounted [Fri Jan 03 14:11:22.547 2025] [ 1.332611] Freeing unused kernel memory: 1856K [Fri Jan 03 14:11:22.553 2025] [ 1.332729] Run /sbin/init as init process [Fri Jan 03 14:11:22.561 2025] [ 1.332732] with arguments: [Fri Jan 03 14:11:22.561 2025] [ 1.332734] /sbin/init [Fri Jan 03 14:11:22.567 2025] [ 1.332735] with environment: [Fri Jan 03 14:11:22.567 2025] [ 1.332737] HOME=/ [Fri Jan 03 14:11:22.571 2025] [ 1.332739] TERM=linux [Fri Jan 03 14:11:22.571 2025] [ 1.332740] syntec_extend= [Fri Jan 03 14:11:22.576 2025] [ 1.423875] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:11:22.583 2025] [ 1.449918] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:11:22.583 2025] [ 1.451109] Segment Routing with IPv6 [Fri Jan 03 14:11:22.589 2025] [ 1.451159] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:11:22.593 2025] [ 1.496490] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:11:22.621 2025] [ 1.497034] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:11:22.626 2025] [ 1.500309] systemd[1]: Hostname set to . [Fri Jan 03 14:11:22.633 2025] [ 1.635290] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:11:22.660 2025] [ 1.924263] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:11:22.674 2025] [ 1.927015] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:11:22.694 2025] [ 1.989685] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:11:22.699 2025] [ 1.993019] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:11:22.705 2025] [ 1.994574] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:11:22.711 2025] [ 1.995026] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:11:22.718 2025] [ 1.995385] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:11:22.728 2025] [ 1.995592] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:11:22.732 2025] [ 1.995943] systemd[1]: Reached target Path Units. [Fri Jan 03 14:11:22.737 2025] [ 1.996044] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:11:22.743 2025] [ 1.996137] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:11:22.750 2025] [ 1.996228] systemd[1]: Reached target Swaps. [Fri Jan 03 14:11:22.755 2025] [ 2.000476] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:11:22.760 2025] [ 2.000656] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:11:22.766 2025] [ 2.006701] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:11:22.772 2025] [ 2.007169] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:11:22.777 2025] [ 2.007984] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:11:22.783 2025] [ 2.008524] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:11:22.790 2025] [ 2.009039] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:11:22.795 2025] [ 2.009865] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:11:22.802 2025] [ 2.011720] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:11:22.815 2025] [ 2.012241] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:11:22.820 2025] [ 2.012705] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:11:22.825 2025] [ 2.071901] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:11:22.832 2025] [ 2.076002] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:11:22.838 2025] [ 2.080277] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:11:22.844 2025] [ 2.081153] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:11:22.860 2025] [ 2.082312] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:11:22.866 2025] [ 2.086124] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:11:22.877 2025] [ 2.092893] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:11:22.882 2025] [ 2.098301] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:11:22.888 2025] [ 2.103271] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:11:22.893 2025] [ 2.108540] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:11:22.900 2025] [ 2.117375] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:11:22.905 2025] [ 2.117931] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:11:22.916 2025] [ 2.119497] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:11:22.930 2025] [ 2.119522] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:11:22.940 2025] [ 2.121552] fuse: init (API version 7.37) [Fri Jan 03 14:11:22.942 2025] [ 2.123309] systemd[1]: Starting Journal Service... [Fri Jan 03 14:11:22.948 2025] [ 2.131941] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:11:22.954 2025] [ 2.136733] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:11:22.960 2025] [ 2.142015] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:11:22.967 2025] [ 2.147301] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:11:22.976 2025] [ 2.152459] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:11:22.978 2025] [ 2.178405] systemd[1]: Started RPC Bind. [Fri Jan 03 14:11:22.984 2025] [ 2.179418] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:11:22.990 2025] [ 2.179668] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:11:22.995 2025] [ 2.180615] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:11:23.001 2025] [ 2.184211] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:11:23.006 2025] [ 2.185660] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:11:23.011 2025] [ 2.186511] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:11:23.017 2025] [ 2.188019] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:11:23.022 2025] [ 2.192603] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:11:23.030 2025] [ 2.194473] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:11:23.036 2025] [ 2.200287] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:11:23.041 2025] [ 2.202071] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:11:23.048 2025] [ 2.204576] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:11:23.054 2025] [ 2.207771] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:11:23.060 2025] [ 2.213675] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:11:23.066 2025] [ 2.213864] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:11:23.071 2025] [ 2.218658] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:11:23.077 2025] [ 2.219877] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:11:23.083 2025] [ 2.233792] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:11:23.089 2025] [ 2.238855] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:11:23.095 2025] [ 2.242154] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:11:23.106 2025] [ 2.242618] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:11:23.123 2025] [ 2.247274] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:11:23.125 2025] [ 2.247793] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:11:23.141 2025] [ 2.252363] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:11:23.155 2025] [ 2.258084] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:11:23.165 2025] [ 2.259265] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:11:23.172 2025] [ 2.265068] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:11:23.190 2025] [ 2.313902] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:11:23.200 2025] [ 2.323955] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 14:11:23.204 2025] [ 2.324751] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 14:11:23.218 2025] [ 2.349846] systemd[1]: Mounting /media/ram... [Fri Jan 03 14:11:23.223 2025] [ 2.355858] systemd[1]: Mounting /var/volatile... [Fri Jan 03 14:11:23.229 2025] [ 2.360858] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 14:11:23.253 2025] [ 2.365306] systemd[1]: Started Journal Service. [Fri Jan 03 14:11:23.257 2025] [ 2.420455] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:11:23.387 2025] [ 2.752179] random: crng init done [Fri Jan 03 14:11:23.543 2025] [ 2.908134] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:11:23.551 2025] [ 2.908152] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:11:23.559 2025] [ 2.908167] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:11:23.574 2025] [ 2.908197] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:11:23.586 2025] [ 2.908222] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:11:23.586 2025] [ 2.913083] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:11:23.597 2025] [ 2.913122] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:11:23.630 2025] [ 2.913155] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:11:23.713 2025] [ 2.913177] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:11:23.730 2025] [ 2.913190] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:11:23.747 2025] [ 2.913194] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:11:23.763 2025] [ 2.913205] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:11:23.780 2025] [ 2.913219] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:11:23.783 2025] [ 2.913226] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:11:23.796 2025] [ 2.913230] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:11:23.796 2025] [ 2.913239] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:11:23.813 2025] [ 2.913251] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:11:23.829 2025] [ 2.923756] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:11:23.845 2025] [ 2.923772] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:11:23.846 2025] [ 2.923803] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:11:23.863 2025] [ 2.923806] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:11:23.863 2025] [ 2.923831] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:11:23.879 2025] [ 2.939349] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:11:23.883 2025] [ 2.940452] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:41:40 UTC (1681065700) [Fri Jan 03 14:11:23.897 2025] [ 2.948924] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:11:23.946 2025] [ 2.948969] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:11:23.995 2025] [ 2.952195] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:11:24.047 2025] [ 2.952221] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:11:24.096 2025] [ 2.992412] mc: Linux media interface: v0.10 [Fri Jan 03 14:11:24.096 2025] [ 3.033711] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:11:24.113 2025] [ 3.071140] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:11:24.130 2025] [ 3.071360] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:11:24.130 2025] [ 3.073248] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:11:24.163 2025] [ 3.080613] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:11:24.163 2025] [ 3.082814] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:11:24.196 2025] [ 3.082853] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:11:24.214 2025] [ 3.082898] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:11:24.229 2025] [ 3.082906] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:11:24.229 2025] [ 3.264637] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:11:24.229 2025] [ 3.264676] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:11:24.247 2025] [ 3.264682] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:11:24.247 2025] [ 3.264702] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:11:24.263 2025] [ 3.264734] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:11:24.279 2025] [ 3.264751] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:11:24.284 2025] [ 3.264758] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:11:24.284 2025] [ 3.276578] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:11:24.297 2025] [ 3.277008] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:11:24.313 2025] [ 3.277645] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:11:24.330 2025] [ 3.278570] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:11:24.330 2025] [ 3.322650] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:11:24.330 2025] [ 3.322850] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:11:24.346 2025] [ 3.341284] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:11:24.346 2025] [ 3.341324] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:11:24.363 2025] [ 3.347424] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:11:24.363 2025] [ 3.347476] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:11:24.384 2025] [ 3.347484] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:11:24.396 2025] [ 3.348185] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:11:24.396 2025] [ 3.348407] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:11:24.396 2025] [ 3.387947] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:11:24.413 2025] [ 3.388661] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:11:24.413 2025] [ 3.388690] Get kick_gpio number= (418) [Fri Jan 03 14:11:24.962 2025] [ 4.333543] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:11:24.978 2025] [ 4.333567] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:11:24.979 2025] [ 4.333583] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:11:25.013 2025] [ 4.333611] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:11:25.085 2025] [ 4.333626] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:11:25.085 2025] [ 4.333636] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:11:25.096 2025] [ 4.363502] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:11:25.096 2025] [ 4.372880] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:11:25.113 2025] [ 4.374301] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:11:25.163 2025] [ 4.533396] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:11:25.313 2025] [ 4.691053] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:11:25.330 2025] [ 4.691321] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:11:25.330 2025] [ 4.691647] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:11:25.346 2025] [ 4.691659] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:11:25.346 2025] [ 4.697532] xhci-hcd xhci-hcd.4.auto: irq 468, io mem 0x31100000 [Fri Jan 03 14:11:25.362 2025] [ 4.698976] hub 1-0:1.0: USB hub found [Fri Jan 03 14:11:25.362 2025] [ 4.699030] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:11:25.463 2025] [ 4.833306] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:11:25.513 2025] [ 4.882248] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:11:25.529 2025] [ 4.884677] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:11:25.546 2025] [ 4.884724] cfg80211: failed to load regulatory.db [Fri Jan 03 14:11:25.563 2025] [ 4.940186] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:11:25.673 2025] [ 5.036750] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:11:25.694 2025] [ 5.036789] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:11:25.749 2025] [ 5.114465] hub 1-1:1.0: USB hub found [Fri Jan 03 14:11:25.753 2025] [ 5.114736] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:11:25.946 2025] [ 5.311078] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:11:25.954 2025] [ 5.311148] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:26.090 2025] [ 5.455677] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:11:26.097 2025] [ 5.455806] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:26.136 2025] [ 5.501218] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:11:26.140 2025] [ 5.501257] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:26.190 2025] [ 5.556010] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:11:26.288 2025] [ 5.652673] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:11:26.297 2025] [ 5.653610] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:26.413 2025] [ 5.779011] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:11:26.453 2025] [ 5.818825] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:11:26.461 2025] [ 5.818857] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:11:26.860 2025] [ 6.225827] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:11:26.865 2025] [ 6.227091] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:11:27.059 2025] *************************************************************** [Fri Jan 03 14:11:27.064 2025] *************************************************************** [Fri Jan 03 14:11:27.074 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:11:27.076 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:11:27.082 2025] bash [Fri Jan 03 14:11:27.082 2025] cifs-utils [Fri Jan 03 14:11:27.082 2025] dosfstools [Fri Jan 03 14:11:27.082 2025] grub-common [Fri Jan 03 14:11:27.087 2025] grub-editenv [Fri Jan 03 14:11:27.091 2025] grub-efi [Fri Jan 03 14:11:27.091 2025] less [Fri Jan 03 14:11:27.092 2025] lib32-libgcc1 [Fri Jan 03 14:11:27.092 2025] lib32-libstdc++6 [Fri Jan 03 14:11:27.096 2025] libdw1 [Fri Jan 03 14:11:27.096 2025] libelf1 [Fri Jan 03 14:11:27.096 2025] libgcc1 [Fri Jan 03 14:11:27.097 2025] libgdbm-compat4 [Fri Jan 03 14:11:27.101 2025] libgdbm6 [Fri Jan 03 14:11:27.101 2025] libgmp10 [Fri Jan 03 14:11:27.101 2025] libidn2-0 [Fri Jan 03 14:11:27.102 2025] libreadline8 [Fri Jan 03 14:11:27.102 2025] libstdc++6 [Fri Jan 03 14:11:27.102 2025] libunistring2 [Fri Jan 03 14:11:27.106 2025] libvte-2.91-0 [Fri Jan 03 14:11:27.106 2025] nettle [Fri Jan 03 14:11:27.106 2025] onboard [Fri Jan 03 14:11:27.106 2025] parted [Fri Jan 03 14:11:27.110 2025] rxvt-unicode [Fri Jan 03 14:11:27.111 2025] [Fri Jan 03 14:11:27.111 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:11:27.115 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:11:27.119 2025] the opkg remove command. i.e.: [Fri Jan 03 14:11:27.124 2025] opkg remove [Fri Jan 03 14:11:27.128 2025] Where is the name printed in the list above [Fri Jan 03 14:11:27.132 2025] [Fri Jan 03 14:11:27.133 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:11:27.137 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:11:27.141 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:11:27.146 2025] also remove the dependent packages as well [Fri Jan 03 14:11:27.151 2025] *************************************************************** [Fri Jan 03 14:11:27.156 2025] *************************************************************** [Fri Jan 03 14:11:32.263 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:11:32.263 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:11:32.452 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:11:32.468 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:11:32.531 2025] [Fri Jan 03 14:11:32.531 2025] _____ _____ _ _ [Fri Jan 03 14:11:32.531 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:11:32.531 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:11:32.546 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:11:32.546 2025] |___| |___| [Fri Jan 03 14:11:32.546 2025] [Fri Jan 03 14:11:32.546 2025] Arago Project am62xx-evm - [Fri Jan 03 14:11:32.562 2025] [Fri Jan 03 14:11:32.562 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:11:32.562 2025] [Fri Jan 03 14:11:32.562 2025] am62xx-evm login: [ 12.013750] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:11:32.641 2025] [ 12.013774] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:11:32.656 2025] [ 12.013796] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.656 2025] [ 12.013851] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:11:32.672 2025] [ 12.013857] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:11:32.672 2025] [ 12.013863] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.672 2025] [ 12.013900] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:11:32.688 2025] [ 12.013905] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:11:32.688 2025] [ 12.013913] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.688 2025] [ 12.013951] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:11:32.708 2025] [ 12.013956] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:11:32.708 2025] [ 12.013963] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.719 2025] [ 12.014001] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:11:32.719 2025] [ 12.014006] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:11:32.719 2025] [ 12.014013] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.735 2025] [ 12.014047] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:11:32.735 2025] [ 12.014052] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:11:32.751 2025] [ 12.014059] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.751 2025] [ 12.014204] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:11:32.766 2025] [ 12.014211] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:11:32.766 2025] [ 12.014223] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:32.766 2025] [ 12.014268] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:11:32.782 2025] [ 12.014273] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:11:32.782 2025] [ 12.014282] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:34.937 2025] [ 14.301378] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:11:34.941 2025] [ 14.301401] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:11:34.948 2025] [ 14.301418] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:34.954 2025] [ 14.301465] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:11:34.960 2025] [ 14.301470] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:11:34.966 2025] [ 14.301477] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:34.972 2025] [ 14.301517] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:11:34.978 2025] [ 14.301523] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:11:34.984 2025] [ 14.301529] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:34.990 2025] [ 14.301563] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:11:35.001 2025] [ 14.301568] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:11:35.006 2025] [ 14.301575] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:35.010 2025] [ 14.301609] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:11:35.016 2025] [ 14.301614] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:11:35.021 2025] [ 14.301621] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:35.028 2025] [ 14.301654] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:11:35.033 2025] [ 14.301660] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:11:35.039 2025] [ 14.301667] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:35.045 2025] [ 14.301699] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:11:35.051 2025] [ 14.301704] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:11:35.062 2025] [ 14.301710] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:35.064 2025] [ 14.301743] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:11:35.070 2025] [ 14.301748] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:11:35.076 2025] [ 14.301755] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:35.429 2025] [ 14.794247] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:11:38.717 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:11:38.723 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:11:40.527 2025] [ 19.891830] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:11:40.532 2025] [ 19.891854] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:11:40.538 2025] [ 19.891874] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.543 2025] [ 19.891936] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:11:40.551 2025] [ 19.891942] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:11:40.556 2025] [ 19.891949] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.566 2025] [ 19.891990] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:11:40.569 2025] [ 19.891995] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:11:40.575 2025] [ 19.892003] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.581 2025] [ 19.892045] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:11:40.587 2025] [ 19.892051] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:11:40.593 2025] [ 19.892059] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.599 2025] [ 19.893248] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:11:40.605 2025] [ 19.893468] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:11:40.616 2025] [ 19.893499] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.621 2025] [ 19.893683] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:11:40.624 2025] [ 19.893690] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:11:40.630 2025] [ 19.893699] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.636 2025] [ 19.893763] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:11:40.643 2025] [ 19.893768] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:11:40.649 2025] [ 19.893797] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.655 2025] [ 19.893837] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:11:40.661 2025] [ 19.893861] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:11:40.667 2025] [ 19.893868] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.674 2025] [ 19.958517] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:11:40.679 2025] [ 19.958544] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:11:40.685 2025] [ 19.958564] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.691 2025] [ 19.958634] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:11:40.697 2025] [ 19.958639] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:11:40.703 2025] [ 19.958649] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.709 2025] [ 19.958686] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:11:40.715 2025] [ 19.958691] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:11:40.720 2025] [ 19.958701] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.727 2025] [ 19.958739] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:11:40.737 2025] [ 19.958745] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:11:40.740 2025] [ 19.958752] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.747 2025] [ 19.958786] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:11:40.753 2025] [ 19.958791] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:11:40.759 2025] [ 19.958802] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.765 2025] [ 19.958837] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:11:40.771 2025] [ 19.958842] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:11:40.780 2025] [ 19.958849] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.783 2025] [ 19.958889] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:11:40.789 2025] [ 19.958894] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:11:40.795 2025] [ 19.958901] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:11:40.802 2025] [ 19.958934] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:11:40.808 2025] [ 19.958943] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:11:40.815 2025] [ 19.958950] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:13.238 2025] [Fri Jan 03 14:12:13.238 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:12:13.253 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:12:13.316 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:12:13.332 2025] Trying to boot from MMC1 [Fri Jan 03 14:12:13.505 2025] Authentication passed [Fri Jan 03 14:12:13.520 2025] Authentication passed [Fri Jan 03 14:12:13.521 2025] Authentication passed [Fri Jan 03 14:12:13.552 2025] Authentication passed [Fri Jan 03 14:12:13.552 2025] Authentication passed [Fri Jan 03 14:12:13.568 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:12:13.568 2025] [Fri Jan 03 14:12:13.568 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:12:13.568 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:12:13.881 2025] [Fri Jan 03 14:12:13.882 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:12:13.887 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:12:13.928 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:12:13.934 2025] Error: could not access storage. [Fri Jan 03 14:12:13.938 2025] Trying to boot from MMC1 [Fri Jan 03 14:12:14.099 2025] Authentication passed [Fri Jan 03 14:12:14.105 2025] Authentication passed [Fri Jan 03 14:12:14.758 2025] [Fri Jan 03 14:12:14.758 2025] [Fri Jan 03 14:12:14.758 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:12:14.765 2025] [Fri Jan 03 14:12:14.765 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:12:14.765 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:12:14.770 2025] DRAM: 2 GiB [Fri Jan 03 14:12:15.011 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:12:15.015 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:12:15.026 2025] Loading Environment from MMC... OK [Fri Jan 03 14:12:15.232 2025] In: serial [Fri Jan 03 14:12:15.232 2025] Out: serial [Fri Jan 03 14:12:15.236 2025] Err: serial [Fri Jan 03 14:12:15.239 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:12:15.240 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:12:15.401 2025] switch to partitions #0, OK [Fri Jan 03 14:12:15.402 2025] mmc0(part 0) is current device [Fri Jan 03 14:12:15.549 2025] SD/MMC found on device 0 [Fri Jan 03 14:12:15.551 2025] Running eMMC boot ... [Fri Jan 03 14:12:15.569 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:12:15.571 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:12:15.577 2025] Importing environment from mmc0 ... [Fri Jan 03 14:12:15.790 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:12:15.806 2025] 62962 bytes read in 17 ms (3.5 MiB/s) [Fri Jan 03 14:12:15.821 2025] Working FDT set to 88000000 [Fri Jan 03 14:12:15.826 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:12:15.826 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:12:15.837 2025] Working FDT set to 88000000 [Fri Jan 03 14:12:15.853 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:12:15.853 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:12:15.869 2025] Working FDT set to 8feed000 [Fri Jan 03 14:12:15.884 2025] [Fri Jan 03 14:12:15.884 2025] Starting kernel ... [Fri Jan 03 14:12:15.884 2025] [Fri Jan 03 14:12:15.915 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:12:15.926 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:12:15.947 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:12:15.947 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:12:16.041 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:12:16.041 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:12:16.041 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:12:16.057 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:12:16.057 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:12:16.073 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:12:16.073 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:12:16.088 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:12:16.088 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:12:16.104 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:12:16.119 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:12:16.127 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:12:16.135 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:12:16.135 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:12:16.151 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:12:16.151 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:12:16.151 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:12:16.167 2025] [ 0.000000] Normal empty [Fri Jan 03 14:12:16.167 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:12:16.182 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:12:16.182 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:12:16.182 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:12:16.182 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:12:16.198 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:12:16.198 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:12:16.198 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:12:16.213 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:12:16.213 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:12:16.230 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:12:16.230 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:12:16.230 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:12:16.245 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:12:16.245 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:12:16.245 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:12:16.261 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:12:16.261 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:12:16.261 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:12:16.276 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:12:16.276 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:12:16.276 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:12:16.292 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:12:16.292 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:12:16.308 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:12:16.355 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:12:16.355 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:12:16.371 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:12:16.371 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:12:16.387 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:12:16.402 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:12:16.402 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:12:16.402 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:12:16.418 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:12:16.428 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:12:16.434 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:12:16.434 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:12:16.434 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:12:16.450 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:12:16.450 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:12:16.465 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:12:16.465 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:12:16.465 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:12:16.465 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:12:16.481 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:12:16.481 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:12:16.481 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:12:16.497 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:12:16.497 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:12:16.512 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:12:16.512 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:12:16.528 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:12:16.528 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:12:16.528 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:12:16.543 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:12:16.559 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:12:16.559 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:12:16.575 2025] [ 0.528879] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:12:16.575 2025] [ 0.528889] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:12:16.590 2025] [ 0.528975] LSM: Security Framework initializing [Fri Jan 03 14:12:16.590 2025] [ 0.529113] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:12:16.590 2025] [ 0.529136] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:12:16.606 2025] [ 0.530826] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:12:16.606 2025] [ 0.530832] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:12:16.621 2025] [ 0.530878] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:12:16.628 2025] [ 0.583341] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:12:16.628 2025] [ 0.583595] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:12:16.638 2025] [ 0.583683] EFI services will not be available. [Fri Jan 03 14:12:16.638 2025] [ 0.583937] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:12:16.653 2025] [ 0.584706] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:12:16.653 2025] [ 0.584823] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:12:16.653 2025] [ 0.584841] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:12:16.669 2025] [ 0.584897] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:12:16.669 2025] [ 0.634963] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:12:16.669 2025] [ 0.635053] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:12:16.684 2025] [ 0.635065] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:12:16.684 2025] [ 0.635096] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:12:16.700 2025] [ 0.660962] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:12:16.700 2025] [ 0.661046] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:12:16.716 2025] [ 0.661058] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:12:16.716 2025] [ 0.661090] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:12:16.728 2025] [ 0.661148] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:12:16.732 2025] [ 0.661154] SMP: Total of 4 processors activated. [Fri Jan 03 14:12:16.732 2025] [ 0.695341] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:12:16.747 2025] [ 0.695345] CPU features: detected: CRC32 instructions [Fri Jan 03 14:12:16.747 2025] [ 0.695390] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:12:16.747 2025] [ 0.695393] alternatives: applying system-wide alternatives [Fri Jan 03 14:12:16.763 2025] [ 0.696872] devtmpfs: initialized [Fri Jan 03 14:12:16.763 2025] [ 0.708488] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:12:16.763 2025] [ 0.708514] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:12:16.779 2025] [ 0.713698] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:12:16.779 2025] [ 0.714513] DMI not present or invalid. [Fri Jan 03 14:12:16.779 2025] [ 0.715043] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:12:16.794 2025] [ 0.729136] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:12:16.794 2025] [ 0.729431] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:12:16.810 2025] [ 0.729627] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:12:16.810 2025] [ 0.729768] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:12:16.826 2025] [ 0.729965] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:12:16.829 2025] [ 0.730597] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:12:16.829 2025] [ 0.730602] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:12:16.842 2025] [ 0.730849] ASID allocator initialised with 65536 entries [Fri Jan 03 14:12:16.842 2025] [ 0.745797] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:12:16.857 2025] [ 0.754957] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:12:16.857 2025] [ 0.754968] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:12:16.857 2025] [ 0.754972] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:12:16.873 2025] [ 0.754975] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:12:16.873 2025] [ 0.754978] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:12:16.889 2025] [ 0.754981] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:12:16.889 2025] [ 0.754985] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:12:16.904 2025] [ 0.754988] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:12:16.904 2025] [ 0.756141] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:12:16.920 2025] [ 0.756652] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:12:16.920 2025] [ 0.756659] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:12:16.929 2025] [ 0.756673] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:12:16.936 2025] [ 0.756688] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:12:16.952 2025] [ 0.756698] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:12:16.952 2025] [ 0.756704] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:12:16.952 2025] [ 0.756928] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:12:16.967 2025] [ 0.756933] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:12:16.967 2025] [ 0.756942] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:12:16.983 2025] [ 0.756955] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:12:16.998 2025] [ 0.756963] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:12:16.998 2025] [ 0.756967] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:12:16.998 2025] [ 0.757218] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:12:17.014 2025] [ 0.757224] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:12:17.014 2025] [ 0.757237] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:12:17.030 2025] [ 0.757250] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:12:17.030 2025] [ 0.757258] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.046 2025] [ 0.757262] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:12:17.046 2025] [ 1.[014559] printk: console [ttyS2] printing thread started [Fri Jan 03 14:12:17.061 2025] 0.757478] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:12:17.061 2025] [ 1.014570] printk: console [ttyS2] enabled [Fri Jan 03 14:12:17.061 2025] [ 1.014575] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:12:17.077 2025] [ 1.027157] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:12:17.077 2025] [ 1.028398] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:12:17.093 2025] [ 1.028409] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:12:17.093 2025] [ 1.028422] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:12:17.108 2025] [ 1.028439] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:12:17.108 2025] [ 1.028451] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.124 2025] [ 1.028456] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:12:17.129 2025] [ 1.028486] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:12:17.140 2025] [ 1.029445] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:12:17.140 2025] [ 1.029454] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:12:17.156 2025] [ 1.029466] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:12:17.156 2025] [ 1.029482] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:12:17.171 2025] [ 1.029493] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.171 2025] [ 1.029496] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:12:17.187 2025] [ 1.032546] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:12:17.187 2025] [ 1.039601] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:12:17.187 2025] [ 1.046354] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:12:17.202 2025] [ 1.046786] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:12:17.202 2025] [ 1.046794] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:12:17.218 2025] [ 1.046809] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:12:17.230 2025] [ 1.046825] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:12:17.234 2025] [ 1.046840] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.234 2025] [ 1.046845] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:12:17.250 2025] [ 1.080069] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:12:17.265 2025] [ 1.080355] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:12:17.265 2025] [ 1.081170] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:12:17.265 2025] [ 1.081178] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:12:17.281 2025] [ 1.081191] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:12:17.281 2025] [ 1.081217] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:12:17.297 2025] [ 1.081232] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.312 2025] [ 1.081237] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:12:17.312 2025] [ 1.081984] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:12:17.312 2025] [ 1.082054] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:12:17.330 2025] [ 1.082307] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:12:17.344 2025] [ 1.082318] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:12:17.344 2025] [ 1.082324] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:12:17.344 2025] [ 1.083099] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:12:17.360 2025] [ 1.099579] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:12:17.360 2025] [ 1.104594] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:12:17.375 2025] [ 1.104608] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:12:17.375 2025] [ 1.104624] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:12:17.391 2025] [ 1.104647] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:12:17.407 2025] [ 1.104660] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.407 2025] [ 1.104665] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:12:17.407 2025] [ 1.104752] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:12:17.422 2025] [ 1.104758] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:12:17.430 2025] [ 1.104775] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:12:17.438 2025] [ 1.104819] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:12:17.438 2025] [ 1.104833] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.454 2025] [ 1.104839] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:12:17.454 2025] [ 1.104844] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:12:17.470 2025] [ 1.104847] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:12:17.470 2025] [ 1.104856] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:12:17.485 2025] [ 1.104871] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:12:17.485 2025] [ 1.104881] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.501 2025] [ 1.104884] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:12:17.501 2025] [ 1.104938] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:12:17.501 2025] [ 1.105516] mmc1: CQHCI version 5.10 [Fri Jan 03 14:12:17.516 2025] [ 1.105978] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:12:17.516 2025] [ 1.105989] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:12:17.532 2025] [ 1.106006] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:12:17.532 2025] [ 1.106027] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:12:17.548 2025] [ 1.106056] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.548 2025] [ 1.106061] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:12:17.564 2025] [ 1.106547] mmc0: CQHCI version 5.10 [Fri Jan 03 14:12:17.564 2025] [ 1.108479] mmc2: CQHCI version 5.10 [Fri Jan 03 14:12:17.564 2025] [ 1.110434] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:12:17.579 2025] [ 1.112758] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:12:17.579 2025] [ 1.115828] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:12:17.595 2025] [ 1.116024] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:12:17.595 2025] [ 1.116102] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:12:17.595 2025] [ 1.119200] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:12:17.614 2025] [ 1.119413] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:12:17.620 2025] [ 1.119474] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:12:17.632 2025] [ 1.121115] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:12:17.638 2025] [ 1.121125] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:12:17.642 2025] [ 1.121151] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:12:17.651 2025] [ 1.121168] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:12:17.657 2025] [ 1.121180] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:12:17.665 2025] [ 1.121184] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:12:17.671 2025] [ 1.121193] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:12:17.680 2025] [ 1.121204] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:12:17.689 2025] [ 1.121213] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:12:17.696 2025] [ 1.121218] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:12:17.703 2025] [ 1.121649] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:12:17.709 2025] [ 1.121654] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:12:17.717 2025] [ 1.121668] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:12:17.724 2025] [ 1.121679] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:12:17.731 2025] [ 1.121683] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:12:17.737 2025] [ 1.122203] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:12:17.745 2025] [ 1.122221] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:12:17.751 2025] [ 1.122224] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:12:17.756 2025] [ 1.122323] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:12:17.765 2025] [ 1.122335] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:12:17.775 2025] [ 1.122338] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:12:17.776 2025] [ 1.122394] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:12:17.786 2025] [ 1.122404] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:12:17.792 2025] [ 1.122407] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:12:17.798 2025] [ 1.123070] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:12:17.805 2025] [ 1.125697] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:12:17.812 2025] [ 1.137911] ALSA device list: [Fri Jan 03 14:12:17.817 2025] [ 1.137922] No soundcards found. [Fri Jan 03 14:12:17.825 2025] [ 1.142824] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:12:17.827 2025] [ 1.147750] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:12:17.836 2025] [ 1.155528] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:12:17.840 2025] [ 1.155684] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:12:17.848 2025] [ 1.201510] mmc1: new MMC card at address 0001 [Fri Jan 03 14:12:17.854 2025] [ 1.202344] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:12:17.859 2025] [ 1.210399] mmcblk1: p1 [Fri Jan 03 14:12:17.863 2025] [ 1.211204] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:12:17.868 2025] [ 1.212792] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:12:17.873 2025] [ 1.214221] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:12:17.878 2025] [ 1.295852] mmc0: Command Queue Engine enabled [Fri Jan 03 14:12:17.883 2025] [ 1.295872] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:12:17.888 2025] [ 1.296601] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:12:17.893 2025] [ 1.300630] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:12:17.897 2025] [ 1.301735] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:12:17.901 2025] [ 1.303128] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:12:17.907 2025] [ 1.304277] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:12:17.912 2025] [ 1.327281] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:12:17.917 2025] [ 1.327664] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:17.927 2025] [ 1.327745] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:12:17.931 2025] [ 1.327903] devtmpfs: mounted [Fri Jan 03 14:12:17.934 2025] [ 1.329272] Freeing unused kernel memory: 1856K [Fri Jan 03 14:12:17.940 2025] [ 1.331128] Run /sbin/init as init process [Fri Jan 03 14:12:17.940 2025] [ 1.331132] with arguments: [Fri Jan 03 14:12:17.946 2025] [ 1.331134] /sbin/init [Fri Jan 03 14:12:17.946 2025] [ 1.331136] with environment: [Fri Jan 03 14:12:17.951 2025] [ 1.331137] HOME=/ [Fri Jan 03 14:12:17.955 2025] [ 1.331139] TERM=linux [Fri Jan 03 14:12:17.957 2025] [ 1.331141] syntec_extend= [Fri Jan 03 14:12:17.962 2025] [ 1.422424] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:12:17.967 2025] [ 1.445668] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:12:17.972 2025] [ 1.446790] Segment Routing with IPv6 [Fri Jan 03 14:12:17.976 2025] [ 1.446822] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:12:17.978 2025] [ 1.488815] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:12:18.012 2025] [ 1.489378] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:12:18.017 2025] [ 1.492634] systemd[1]: Hostname set to . [Fri Jan 03 14:12:18.019 2025] [ 1.602940] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:12:18.042 2025] [ 1.904168] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:12:18.060 2025] [ 1.906936] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:12:18.077 2025] [ 1.970091] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:12:18.085 2025] [ 1.973449] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:12:18.090 2025] [ 1.975014] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:12:18.100 2025] [ 1.975545] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:12:18.102 2025] [ 1.975906] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:12:18.110 2025] [ 1.976134] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:12:18.118 2025] [ 1.976501] systemd[1]: Reached target Path Units. [Fri Jan 03 14:12:18.123 2025] [ 1.976613] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:12:18.129 2025] [ 1.976688] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:12:18.135 2025] [ 1.976775] systemd[1]: Reached target Swaps. [Fri Jan 03 14:12:18.140 2025] [ 1.980952] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:12:18.147 2025] [ 1.981158] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:12:18.152 2025] [ 1.987257] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:12:18.157 2025] [ 1.987709] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:12:18.164 2025] [ 1.988540] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:12:18.169 2025] [ 1.989103] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:12:18.175 2025] [ 1.989657] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:12:18.180 2025] [ 1.990414] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:12:18.185 2025] [ 1.992353] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:12:18.196 2025] [ 1.992870] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:12:18.201 2025] [ 1.993386] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:12:18.206 2025] [ 2.047829] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:12:18.216 2025] [ 2.052014] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:12:18.226 2025] [ 2.056503] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:12:18.232 2025] [ 2.057388] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:12:18.243 2025] [ 2.058673] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:12:18.252 2025] [ 2.062773] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:12:18.258 2025] [ 2.068258] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:12:18.264 2025] [ 2.075954] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:12:18.270 2025] [ 2.084104] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:12:18.276 2025] [ 2.089162] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:12:18.281 2025] [ 2.095545] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:12:18.287 2025] [ 2.095971] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:12:18.298 2025] [ 2.097757] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:12:18.312 2025] [ 2.097782] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:12:18.319 2025] [ 2.101825] fuse: init (API version 7.37) [Fri Jan 03 14:12:18.324 2025] [ 2.102317] systemd[1]: Starting Journal Service... [Fri Jan 03 14:12:18.330 2025] [ 2.110606] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:12:18.336 2025] [ 2.115573] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:12:18.342 2025] [ 2.120602] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:12:18.348 2025] [ 2.125682] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:12:18.354 2025] [ 2.130631] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:12:18.359 2025] [ 2.149603] systemd[1]: Started RPC Bind. [Fri Jan 03 14:12:18.365 2025] [ 2.155968] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:12:18.370 2025] [ 2.161017] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:12:18.379 2025] [ 2.161913] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:12:18.381 2025] [ 2.162615] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:12:18.386 2025] [ 2.165074] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:12:18.392 2025] [ 2.170006] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:12:18.399 2025] [ 2.170910] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:12:18.405 2025] [ 2.173689] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:12:18.416 2025] [ 2.175713] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:12:18.417 2025] [ 2.177236] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:12:18.423 2025] [ 2.180740] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:12:18.430 2025] [ 2.182355] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:12:18.439 2025] [ 2.183477] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:12:18.441 2025] [ 2.183698] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:12:18.448 2025] [ 2.188804] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:12:18.455 2025] [ 2.191114] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:12:18.463 2025] [ 2.192788] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:12:18.463 2025] [ 2.223562] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:12:18.469 2025] [ 2.227674] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:12:18.476 2025] [ 2.234600] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:12:18.482 2025] [ 2.245987] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:12:18.488 2025] [ 2.246869] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:12:18.493 2025] [ 2.247620] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:12:18.499 2025] [ 2.250622] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:12:18.510 2025] [ 2.250975] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:12:18.527 2025] [ 2.251600] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:12:18.535 2025] [ 2.256185] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:12:18.543 2025] [ 2.305437] systemd[1]: Started Journal Service. [Fri Jan 03 14:12:18.550 2025] [ 2.344153] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:12:18.767 2025] [ 2.721111] random: crng init done [Fri Jan 03 14:12:18.872 2025] [ 2.827738] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:12:18.878 2025] [ 2.827762] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:12:18.893 2025] [ 2.827778] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:12:18.911 2025] [ 2.827821] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:12:18.929 2025] [ 2.827847] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:12:18.943 2025] [ 2.838452] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:12:18.949 2025] [ 2.838470] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:12:18.959 2025] [ 2.838498] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:12:18.967 2025] [ 2.838529] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:12:18.977 2025] [ 2.838539] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:12:18.985 2025] [ 2.838543] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:12:18.995 2025] [ 2.838554] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:12:19.042 2025] [ 2.838566] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:12:19.049 2025] [ 2.838576] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:12:19.051 2025] [ 2.838580] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:12:19.058 2025] [ 2.838590] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:12:19.109 2025] [ 2.838601] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:12:19.117 2025] [ 2.858517] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:12:19.134 2025] [ 2.858535] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:12:19.141 2025] [ 2.858562] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:12:19.152 2025] [ 2.858565] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:12:19.173 2025] [ 2.858601] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:12:19.180 2025] [ 2.886256] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:12:19.185 2025] [ 2.887350] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:42:35 UTC (1681065755) [Fri Jan 03 14:12:19.203 2025] [ 2.891574] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:12:19.226 2025] [ 2.891599] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:12:19.248 2025] [ 2.967659] mc: Linux media interface: v0.10 [Fri Jan 03 14:12:19.253 2025] [ 2.980957] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:12:19.259 2025] [ 3.028511] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:12:19.291 2025] [ 3.041027] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:12:19.300 2025] [ 3.041325] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:12:19.321 2025] [ 3.043867] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:12:19.346 2025] [ 3.047252] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:12:19.371 2025] [ 3.047286] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:12:19.376 2025] [ 3.047328] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:12:19.389 2025] [ 3.047336] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:12:19.399 2025] [ 3.172279] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:12:19.405 2025] [ 3.172304] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:12:19.414 2025] [ 3.172314] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:12:19.421 2025] [ 3.172331] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:12:19.437 2025] [ 3.172358] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:12:19.446 2025] [ 3.172374] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:12:19.453 2025] [ 3.172386] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:12:19.459 2025] [ 3.210182] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:12:19.469 2025] [ 3.260520] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:12:19.481 2025] [ 3.263918] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:12:19.487 2025] [ 3.265349] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:12:19.497 2025] [ 3.267260] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:12:19.503 2025] [ 3.267345] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:12:19.513 2025] [ 3.282213] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:12:19.517 2025] [ 3.282263] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:12:19.526 2025] [ 3.287085] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:12:19.536 2025] [ 3.287153] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:12:19.540 2025] [ 3.287161] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:12:19.552 2025] [ 3.287904] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:12:19.555 2025] [ 3.288232] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:12:19.568 2025] [ 3.312083] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:12:19.573 2025] [ 3.312673] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:12:19.581 2025] [ 3.312700] Get kick_gpio number= (418) [Fri Jan 03 14:12:20.089 2025] [ 4.050496] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:12:20.104 2025] [ 4.050516] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:12:20.104 2025] [ 4.050539] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:12:20.152 2025] [ 4.050566] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:12:20.167 2025] [ 4.050582] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:12:20.183 2025] [ 4.050587] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:12:20.199 2025] [ 4.050767] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:12:20.214 2025] [ 4.097361] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:12:20.214 2025] [ 4.098720] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:12:20.340 2025] [ 4.301951] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:12:20.340 2025] [ 4.302006] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:12:20.372 2025] [ 4.304988] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:12:20.387 2025] [ 4.305012] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:12:20.419 2025] [ 4.329779] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:12:20.436 2025] [ 4.332363] hub 1-0:1.0: USB hub found [Fri Jan 03 14:12:20.450 2025] [ 4.332404] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:12:20.466 2025] [ 4.403263] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:12:20.607 2025] [ 4.573147] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:12:20.781 2025] [ 4.746777] hub 1-1:1.0: USB hub found [Fri Jan 03 14:12:20.796 2025] [ 4.753430] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:12:20.796 2025] [ 4.764539] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:12:20.843 2025] [ 4.804464] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:12:20.859 2025] [ 4.806669] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:12:20.859 2025] [ 4.806706] cfg80211: failed to load regulatory.db [Fri Jan 03 14:12:20.969 2025] [ 4.936276] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:12:20.984 2025] [ 4.936310] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:12:21.346 2025] [ 5.315195] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:12:21.362 2025] [ 5.315236] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:21.362 2025] [ 5.319367] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:12:21.378 2025] [ 5.319407] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:21.598 2025] [ 5.555765] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:12:21.598 2025] [ 5.555818] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:21.642 2025] [ 5.597848] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:12:21.746 2025] [ 5.698644] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:12:21.751 2025] [ 5.705431] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:21.787 2025] [ 5.737788] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:12:21.817 2025] [ 5.772331] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:12:21.831 2025] [ 5.772367] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:12:22.264 2025] [ 6.219151] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:12:22.272 2025] [ 6.222534] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:12:22.355 2025] *************************************************************** [Fri Jan 03 14:12:22.360 2025] *************************************************************** [Fri Jan 03 14:12:22.369 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:12:22.371 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:12:22.377 2025] bash [Fri Jan 03 14:12:22.377 2025] cifs-utils [Fri Jan 03 14:12:22.377 2025] dosfstools [Fri Jan 03 14:12:22.377 2025] grub-common [Fri Jan 03 14:12:22.382 2025] grub-editenv [Fri Jan 03 14:12:22.386 2025] grub-efi [Fri Jan 03 14:12:22.386 2025] less [Fri Jan 03 14:12:22.386 2025] lib32-libgcc1 [Fri Jan 03 14:12:22.386 2025] lib32-libstdc++6 [Fri Jan 03 14:12:22.390 2025] libdw1 [Fri Jan 03 14:12:22.390 2025] libelf1 [Fri Jan 03 14:12:22.390 2025] libgcc1 [Fri Jan 03 14:12:22.390 2025] libgdbm-compat4 [Fri Jan 03 14:12:22.397 2025] libgdbm6 [Fri Jan 03 14:12:22.397 2025] libgmp10 [Fri Jan 03 14:12:22.398 2025] libidn2-0 [Fri Jan 03 14:12:22.398 2025] libreadline8 [Fri Jan 03 14:12:22.402 2025] libstdc++6 [Fri Jan 03 14:12:22.402 2025] libunistring2 [Fri Jan 03 14:12:22.402 2025] libvte-2.91-0 [Fri Jan 03 14:12:22.402 2025] nettle [Fri Jan 03 14:12:22.402 2025] onboard [Fri Jan 03 14:12:22.402 2025] parted [Fri Jan 03 14:12:22.406 2025] rxvt-unicode [Fri Jan 03 14:12:22.406 2025] [Fri Jan 03 14:12:22.406 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:12:22.411 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:12:22.416 2025] the opkg remove command. i.e.: [Fri Jan 03 14:12:22.417 2025] opkg remove [Fri Jan 03 14:12:22.421 2025] Where is the name printed in the list above [Fri Jan 03 14:12:22.426 2025] [Fri Jan 03 14:12:22.426 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:12:22.432 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:12:22.437 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:12:22.441 2025] also remove the dependent packages as well [Fri Jan 03 14:12:22.446 2025] *************************************************************** [Fri Jan 03 14:12:22.451 2025] *************************************************************** [Fri Jan 03 14:12:27.632 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:12:27.632 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:12:27.761 2025] [Fri Jan 03 14:12:27.761 2025] _____ _____ _ _ [Fri Jan 03 14:12:27.774 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:12:27.774 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:12:27.789 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:12:27.789 2025] |___| |___| [Fri Jan 03 14:12:27.789 2025] [Fri Jan 03 14:12:27.789 2025] Arago Project am62xx-evm - [Fri Jan 03 14:12:27.789 2025] [Fri Jan 03 14:12:27.789 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:12:27.805 2025] [Fri Jan 03 14:12:27.805 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:12:27.836 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:12:28.009 2025] [ 11.970877] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:12:28.009 2025] [ 11.970905] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:12:28.024 2025] [ 11.970924] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.024 2025] [ 11.970989] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:12:28.024 2025] [ 11.970994] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:12:28.040 2025] [ 11.971002] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.040 2025] [ 11.971140] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:12:28.055 2025] [ 11.971147] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:12:28.062 2025] [ 11.971159] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.071 2025] [ 11.971218] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:12:28.071 2025] [ 11.971223] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:12:28.071 2025] [ 11.971231] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.087 2025] [ 11.971272] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:12:28.087 2025] [ 11.971277] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:12:28.087 2025] [ 11.971285] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.103 2025] [ 11.971321] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:12:28.103 2025] [ 11.971326] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:12:28.118 2025] [ 11.971337] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.118 2025] [ 11.971371] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:12:28.118 2025] [ 11.971376] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:12:28.134 2025] [ 11.971384] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:28.134 2025] [ 11.971422] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:12:28.150 2025] [ 11.971427] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:12:28.150 2025] [ 11.971434] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.309 2025] [ 14.264836] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:12:30.309 2025] [ 14.264859] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:12:30.309 2025] [ 14.264875] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.325 2025] [ 14.264927] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:12:30.325 2025] [ 14.264932] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:12:30.325 2025] [ 14.264939] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.341 2025] [ 14.264972] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:12:30.341 2025] [ 14.264978] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:12:30.356 2025] [ 14.264985] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.356 2025] [ 14.265018] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:12:30.356 2025] [ 14.265023] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:12:30.372 2025] [ 14.265097] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.372 2025] [ 14.265140] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:12:30.387 2025] [ 14.265145] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:12:30.387 2025] [ 14.265155] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.387 2025] [ 14.265192] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:12:30.403 2025] [ 14.265197] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:12:30.403 2025] [ 14.265204] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.419 2025] [ 14.265237] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:12:30.419 2025] [ 14.265242] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:12:30.419 2025] [ 14.265249] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.434 2025] [ 14.265284] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:12:30.434 2025] [ 14.265289] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:12:30.450 2025] [ 14.265296] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:30.797 2025] [ 14.753756] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:12:34.121 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:12:34.121 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:12:35.931 2025] [ 19.892290] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:12:35.931 2025] [ 19.892318] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:12:35.946 2025] [ 19.892336] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:35.946 2025] [ 19.892389] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:12:35.962 2025] [ 19.892394] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:12:35.962 2025] [ 19.892402] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:35.962 2025] [ 19.892440] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:12:35.978 2025] [ 19.892448] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:12:35.978 2025] [ 19.892455] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:35.978 2025] [ 19.892489] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:12:35.996 2025] [ 19.892494] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:12:35.996 2025] [ 19.892501] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.009 2025] [ 19.892540] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:12:36.009 2025] [ 19.892544] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:12:36.009 2025] [ 19.892552] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.025 2025] [ 19.892586] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:12:36.025 2025] [ 19.892594] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:12:36.041 2025] [ 19.892601] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.041 2025] [ 19.892634] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:12:36.041 2025] [ 19.892639] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:12:36.056 2025] [ 19.892645] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.056 2025] [ 19.892682] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:12:36.072 2025] [ 19.892688] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:12:36.072 2025] [ 19.892695] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.087 2025] [ 19.975165] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:12:36.087 2025] [ 19.975204] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:12:36.096 2025] [ 19.975225] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.103 2025] [ 19.975306] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:12:36.103 2025] [ 19.975326] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:12:36.103 2025] [ 19.975336] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.119 2025] [ 19.975397] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:12:36.119 2025] [ 19.975405] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:12:36.119 2025] [ 19.975412] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.135 2025] [ 19.975466] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:12:36.135 2025] [ 19.975471] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:12:36.150 2025] [ 19.975480] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.150 2025] [ 19.975532] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:12:36.150 2025] [ 19.975538] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:12:36.166 2025] [ 19.975548] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.166 2025] [ 19.975599] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:12:36.182 2025] [ 19.975604] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:12:36.182 2025] [ 19.975614] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.198 2025] [ 19.975667] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:12:36.198 2025] [ 19.975673] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:12:36.198 2025] [ 19.975683] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:12:36.213 2025] [ 19.975742] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:12:36.213 2025] [ 19.975748] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:12:36.229 2025] [ 19.975756] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:08.716 2025] [Fri Jan 03 14:13:08.716 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:13:08.737 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:13:08.787 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:13:08.809 2025] Trying to boot from MMC1 [Fri Jan 03 14:13:08.980 2025] Authentication passed [Fri Jan 03 14:13:08.986 2025] Authentication passed [Fri Jan 03 14:13:08.990 2025] Authentication passed [Fri Jan 03 14:13:09.027 2025] Authentication passed [Fri Jan 03 14:13:09.034 2025] Authentication passed [Fri Jan 03 14:13:09.039 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:13:09.040 2025] [Fri Jan 03 14:13:09.044 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:13:09.048 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:13:09.344 2025] [Fri Jan 03 14:13:09.344 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:13:09.349 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:13:09.390 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:13:09.394 2025] Error: could not access storage. [Fri Jan 03 14:13:09.398 2025] Trying to boot from MMC1 [Fri Jan 03 14:13:09.554 2025] Authentication passed [Fri Jan 03 14:13:09.559 2025] Authentication passed [Fri Jan 03 14:13:10.201 2025] [Fri Jan 03 14:13:10.201 2025] [Fri Jan 03 14:13:10.201 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:13:10.201 2025] [Fri Jan 03 14:13:10.201 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:13:10.216 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:13:10.216 2025] DRAM: 2 GiB [Fri Jan 03 14:13:10.452 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:13:10.452 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:13:10.468 2025] Loading Environment from MMC... OK [Fri Jan 03 14:13:10.673 2025] In: serial [Fri Jan 03 14:13:10.673 2025] Out: serial [Fri Jan 03 14:13:10.673 2025] Err: serial [Fri Jan 03 14:13:10.673 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:13:10.673 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:13:10.831 2025] switch to partitions #0, OK [Fri Jan 03 14:13:10.846 2025] mmc0(part 0) is current device [Fri Jan 03 14:13:10.987 2025] SD/MMC found on device 0 [Fri Jan 03 14:13:10.987 2025] Running eMMC boot ... [Fri Jan 03 14:13:11.003 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:13:11.003 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:13:11.019 2025] Importing environment from mmc0 ... [Fri Jan 03 14:13:11.239 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:13:11.255 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:13:11.255 2025] Working FDT set to 88000000 [Fri Jan 03 14:13:11.270 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:13:11.270 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:13:11.270 2025] Working FDT set to 88000000 [Fri Jan 03 14:13:11.304 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:13:11.304 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:13:11.318 2025] Working FDT set to 8feed000 [Fri Jan 03 14:13:11.318 2025] [Fri Jan 03 14:13:11.318 2025] Starting kernel ... [Fri Jan 03 14:13:11.333 2025] [Fri Jan 03 14:13:11.365 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:13:11.365 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:13:11.380 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:13:11.396 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:13:11.474 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:13:11.490 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:13:11.490 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:13:11.490 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:13:11.506 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:13:11.506 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:13:11.522 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:13:11.522 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:13:11.537 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:13:11.553 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:13:11.553 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:13:11.569 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:13:11.569 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:13:11.584 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:13:11.584 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:13:11.604 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:13:11.608 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:13:11.613 2025] [ 0.000000] Normal empty [Fri Jan 03 14:13:11.617 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:13:11.621 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:13:11.626 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:13:11.634 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:13:11.636 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:13:11.641 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:13:11.647 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:13:11.653 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:13:11.663 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:13:11.665 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:13:11.673 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:13:11.678 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:13:11.683 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:13:11.689 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:13:11.694 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:13:11.699 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:13:11.705 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:13:11.710 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:13:11.715 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:13:11.720 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:13:11.726 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:13:11.733 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:13:11.739 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:13:11.744 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:13:11.751 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:13:11.798 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:13:11.808 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:13:11.816 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:13:11.824 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:13:11.834 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:13:11.848 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:13:11.853 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:13:11.859 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:13:11.864 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:13:11.871 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:13:11.881 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:13:11.884 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:13:11.891 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:13:11.897 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:13:11.903 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:13:11.907 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:13:11.913 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:13:11.918 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:13:11.922 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:13:11.928 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:13:11.933 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:13:11.939 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:13:11.946 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:13:11.953 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:13:11.959 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:13:11.966 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:13:11.971 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:13:11.977 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:13:11.985 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:13:11.995 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:13:12.002 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:13:12.010 2025] [ 0.000245] Console: colour dummy device 80x25 [Fri Jan 03 14:13:12.020 2025] [ 0.528871] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:13:12.027 2025] [ 0.528881] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:13:12.033 2025] [ 0.528965] LSM: Security Framework initializing [Fri Jan 03 14:13:12.038 2025] [ 0.529098] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:13:12.044 2025] [ 0.529122] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:13:12.052 2025] [ 0.530801] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:13:12.058 2025] [ 0.530808] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:13:12.063 2025] [ 0.530852] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:13:12.073 2025] [ 0.583314] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:13:12.076 2025] [ 0.583547] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:13:12.085 2025] [ 0.583629] EFI services will not be available. [Fri Jan 03 14:13:12.090 2025] [ 0.583885] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:13:12.096 2025] [ 0.584662] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:13:12.101 2025] [ 0.584772] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:13:12.107 2025] [ 0.584790] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:13:12.114 2025] [ 0.584849] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:13:12.125 2025] [ 0.634932] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:13:12.126 2025] [ 0.635018] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:13:12.134 2025] [ 0.635031] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:13:12.140 2025] [ 0.635062] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:13:12.151 2025] [ 0.660930] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:13:12.153 2025] [ 0.661008] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:13:12.159 2025] [ 0.661020] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:13:12.166 2025] [ 0.661052] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:13:12.172 2025] [ 0.661109] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:13:12.178 2025] [ 0.661115] SMP: Total of 4 processors activated. [Fri Jan 03 14:13:12.183 2025] [ 0.695300] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:13:12.188 2025] [ 0.695304] CPU features: detected: CRC32 instructions [Fri Jan 03 14:13:12.193 2025] [ 0.695350] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:13:12.199 2025] [ 0.695352] alternatives: applying system-wide alternatives [Fri Jan 03 14:13:12.204 2025] [ 0.696817] devtmpfs: initialized [Fri Jan 03 14:13:12.209 2025] [ 0.708447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:13:12.220 2025] [ 0.708474] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:13:12.228 2025] [ 0.713641] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:13:12.231 2025] [ 0.714414] DMI not present or invalid. [Fri Jan 03 14:13:12.236 2025] [ 0.714918] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:13:12.241 2025] [ 0.729136] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:13:12.246 2025] [ 0.729429] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:13:12.253 2025] [ 0.729634] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:13:12.262 2025] [ 0.729774] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:13:12.269 2025] [ 0.729937] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:13:12.276 2025] [ 0.730522] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:13:12.283 2025] [ 0.730526] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:13:12.289 2025] [ 0.730750] ASID allocator initialised with 65536 entries [Fri Jan 03 14:13:12.298 2025] [ 0.745671] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:13:12.303 2025] [ 0.754783] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:13:12.309 2025] [ 0.754794] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:13:12.315 2025] [ 0.754798] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:13:12.321 2025] [ 0.754800] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:13:12.328 2025] [ 0.754804] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:13:12.335 2025] [ 0.754807] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:13:12.341 2025] [ 0.754810] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:13:12.348 2025] [ 0.754813] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:13:12.355 2025] [ 0.755950] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:13:12.362 2025] [ 0.756404] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:13:12.370 2025] [ 0.756412] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:13:12.377 2025] [ 0.756430] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:13:12.386 2025] [ 0.756445] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:13:12.399 2025] [ 0.756457] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.402 2025] [ 0.756463] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:13:12.409 2025] [ 0.756708] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:13:12.417 2025] [ 0.756713] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:13:12.423 2025] [ 0.756722] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:13:12.432 2025] [ 0.756735] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:13:12.439 2025] [ 0.756743] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.451 2025] [ 0.756747] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:13:12.454 2025] [ 0.756992] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:13:12.462 2025] [ 0.756997] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:13:12.469 2025] [ 0.757006] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:13:12.477 2025] [ 0.757018] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:13:12.485 2025] [ 0.757026] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.492 2025] [ 0.757030] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:13:12.500 2025] [ 0.757239] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:13:12.506 2025] [ 0.757243] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:13:12.514 2025] [ 0.757253] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:13:12.523 2025] [ 0.757265] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:13:12.535 2025] [ 1.045[073] printk: console [ttyS2] printing thread started [Fri Jan 03 14:13:12.538 2025] 0.757274] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.545 2025] [ 1.045077] printk: console [ttyS2] enabled [Fri Jan 03 14:13:12.551 2025] [ 1.045081] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:13:12.555 2025] [ 1.058024] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:13:12.561 2025] [ 1.059201] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:13:12.571 2025] [ 1.059211] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:13:12.574 2025] [ 1.059224] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:13:12.587 2025] [ 1.059241] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:13:12.594 2025] [ 1.059253] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.601 2025] [ 1.059257] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:13:12.608 2025] [ 1.059290] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:13:12.616 2025] [ 1.060219] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:13:12.622 2025] [ 1.060227] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:13:12.629 2025] [ 1.060239] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:13:12.638 2025] [ 1.060253] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:13:12.647 2025] [ 1.060263] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.653 2025] [ 1.060267] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:13:12.658 2025] [ 1.063297] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:13:12.667 2025] [ 1.070350] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:13:12.673 2025] [ 1.076735] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:13:12.680 2025] [ 1.077182] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:13:12.686 2025] [ 1.077188] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:13:12.692 2025] [ 1.077202] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:13:12.703 2025] [ 1.077220] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:13:12.713 2025] [ 1.077238] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.720 2025] [ 1.077243] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:13:12.726 2025] [ 1.110815] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:13:12.733 2025] [ 1.111102] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:13:12.740 2025] [ 1.111901] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:13:12.747 2025] [ 1.111911] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:13:12.753 2025] [ 1.111924] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:13:12.765 2025] [ 1.111950] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:13:12.778 2025] [ 1.111964] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.785 2025] [ 1.111969] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:13:12.791 2025] [ 1.112707] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:13:12.798 2025] [ 1.112752] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:13:12.812 2025] [ 1.113018] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:13:12.818 2025] [ 1.113035] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:13:12.825 2025] [ 1.113041] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:13:12.832 2025] [ 1.113834] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:13:12.840 2025] [ 1.130323] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:13:12.848 2025] [ 1.135010] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:13:12.856 2025] [ 1.135268] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:13:12.862 2025] [ 1.135274] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:13:12.868 2025] [ 1.135287] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:13:12.878 2025] [ 1.135307] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:13:12.892 2025] [ 1.135318] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.896 2025] [ 1.135323] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:13:12.902 2025] [ 1.136431] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:13:12.906 2025] [ 1.136443] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:13:12.915 2025] [ 1.136458] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:13:12.923 2025] [ 1.136482] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:13:12.932 2025] [ 1.136494] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.939 2025] [ 1.136499] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:13:12.945 2025] [ 1.136509] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:13:12.951 2025] [ 1.136513] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:13:12.958 2025] [ 1.136521] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:13:12.970 2025] [ 1.136537] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:13:12.977 2025] [ 1.136545] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:13:12.984 2025] [ 1.136549] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:13:12.990 2025] [ 1.136948] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:13:12.999 2025] [ 1.136957] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:13:13.003 2025] [ 1.136978] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:13:13.016 2025] [ 1.137050] mmc0: CQHCI version 5.10 [Fri Jan 03 14:13:13.017 2025] [ 1.137162] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:13:13.025 2025] [ 1.137166] mmc1: CQHCI version 5.10 [Fri Jan 03 14:13:13.030 2025] [ 1.137182] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:13:13.036 2025] [ 1.137187] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:13:13.045 2025] [ 1.137639] mmc2: CQHCI version 5.10 [Fri Jan 03 14:13:13.047 2025] [ 1.139489] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:13:13.054 2025] [ 1.141947] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:13:13.063 2025] [ 1.144914] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:13:13.069 2025] [ 1.145100] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:13:13.075 2025] [ 1.145167] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:13:13.082 2025] [ 1.148265] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:13:13.088 2025] [ 1.148511] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:13:13.098 2025] [ 1.148581] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:13:13.100 2025] [ 1.150181] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:13:13.107 2025] [ 1.150189] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:13:13.114 2025] [ 1.150214] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:13:13.122 2025] [ 1.150229] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:13:13.133 2025] [ 1.150244] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:13:13.135 2025] [ 1.150248] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:13:13.142 2025] [ 1.150260] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:13:13.152 2025] [ 1.150275] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:13:13.161 2025] [ 1.150284] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:13:13.168 2025] [ 1.150289] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:13:13.174 2025] [ 1.150704] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:13:13.182 2025] [ 1.150709] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:13:13.191 2025] [ 1.150721] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:13:13.200 2025] [ 1.150732] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:13:13.205 2025] [ 1.150736] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:13:13.207 2025] [ 1.151240] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:13:13.216 2025] [ 1.151253] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:13:13.222 2025] [ 1.151256] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:13:13.228 2025] [ 1.151360] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:13:13.240 2025] [ 1.151371] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:13:13.243 2025] [ 1.151375] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:13:13.249 2025] [ 1.151439] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:13:13.257 2025] [ 1.151450] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:13:13.264 2025] [ 1.151453] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:13:13.269 2025] [ 1.152124] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:13:13.276 2025] [ 1.154725] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:13:13.284 2025] [ 1.167090] ALSA device list: [Fri Jan 03 14:13:13.290 2025] [ 1.167103] No soundcards found. [Fri Jan 03 14:13:13.294 2025] [ 1.173598] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:13:13.300 2025] [ 1.177208] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:13:13.305 2025] [ 1.188841] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:13:13.312 2025] [ 1.234957] mmc1: new MMC card at address 0001 [Fri Jan 03 14:13:13.317 2025] [ 1.235854] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:13:13.322 2025] [ 1.243968] mmcblk1: p1 [Fri Jan 03 14:13:13.327 2025] [ 1.244782] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:13:13.332 2025] [ 1.246417] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:13:13.337 2025] [ 1.247755] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:13:13.342 2025] [ 1.247968] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:13:13.349 2025] [ 1.325545] mmc0: Command Queue Engine enabled [Fri Jan 03 14:13:13.354 2025] [ 1.325564] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:13:13.359 2025] [ 1.326274] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:13:13.364 2025] [ 1.330312] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:13:13.370 2025] [ 1.331387] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:13:13.374 2025] [ 1.332708] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:13:13.379 2025] [ 1.333843] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:13:13.384 2025] [ 1.352620] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:13:13.389 2025] [ 1.353007] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:13.396 2025] [ 1.353097] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:13:13.402 2025] [ 1.353258] devtmpfs: mounted [Fri Jan 03 14:13:13.406 2025] [ 1.354627] Freeing unused kernel memory: 1856K [Fri Jan 03 14:13:13.412 2025] [ 1.360902] Run /sbin/init as init process [Fri Jan 03 14:13:13.416 2025] [ 1.360906] with arguments: [Fri Jan 03 14:13:13.418 2025] [ 1.360908] /sbin/init [Fri Jan 03 14:13:13.418 2025] [ 1.360909] with environment: [Fri Jan 03 14:13:13.423 2025] [ 1.360916] HOME=/ [Fri Jan 03 14:13:13.427 2025] [ 1.360917] TERM=linux [Fri Jan 03 14:13:13.431 2025] [ 1.360919] syntec_extend= [Fri Jan 03 14:13:13.435 2025] [ 1.451934] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:13:13.440 2025] [ 1.490735] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:13:13.445 2025] [ 1.491949] Segment Routing with IPv6 [Fri Jan 03 14:13:13.449 2025] [ 1.491989] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:13:13.453 2025] [ 1.508497] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:13:13.481 2025] [ 1.509065] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:13:13.486 2025] [ 1.512246] systemd[1]: Hostname set to . [Fri Jan 03 14:13:13.491 2025] [ 1.636873] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:13:13.514 2025] [ 1.949120] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:13:13.533 2025] [ 1.951917] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:13:13.553 2025] [ 2.014234] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:13:13.557 2025] [ 2.017498] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:13:13.563 2025] [ 2.019037] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:13:13.569 2025] [ 2.019561] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:13:13.575 2025] [ 2.019958] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:13:13.586 2025] [ 2.020176] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:13:13.586 2025] [ 2.020588] systemd[1]: Reached target Path Units. [Fri Jan 03 14:13:13.586 2025] [ 2.020684] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:13:13.601 2025] [ 2.020747] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:13:13.606 2025] [ 2.020849] systemd[1]: Reached target Swaps. [Fri Jan 03 14:13:13.606 2025] [ 2.025049] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:13:13.617 2025] [ 2.025231] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:13:13.617 2025] [ 2.031459] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:13:13.633 2025] [ 2.031926] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:13:13.633 2025] [ 2.032760] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:13:13.633 2025] [ 2.033351] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:13:13.649 2025] [ 2.033919] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:13:13.649 2025] [ 2.034686] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:13:13.649 2025] [ 2.036581] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:13:13.664 2025] [ 2.037140] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:13:13.664 2025] [ 2.037671] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:13:13.680 2025] [ 2.077634] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:13:13.680 2025] [ 2.082010] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:13:13.696 2025] [ 2.086871] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:13:13.696 2025] [ 2.087754] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:13:13.712 2025] [ 2.089051] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:13:13.712 2025] [ 2.095661] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:13:13.727 2025] [ 2.101133] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:13:13.727 2025] [ 2.106391] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:13:13.743 2025] [ 2.112005] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:13:13.743 2025] [ 2.117016] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:13:13.758 2025] [ 2.123496] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:13:13.758 2025] [ 2.124154] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:13:13.758 2025] [ 2.125731] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:13:13.774 2025] [ 2.125755] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:13:13.790 2025] [ 2.129487] fuse: init (API version 7.37) [Fri Jan 03 14:13:13.790 2025] [ 2.130306] systemd[1]: Starting Journal Service... [Fri Jan 03 14:13:13.805 2025] [ 2.139996] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:13:13.807 2025] [ 2.155550] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:13:13.807 2025] [ 2.160275] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:13:13.821 2025] [ 2.164973] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:13:13.821 2025] [ 2.167949] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:13:13.837 2025] [ 2.170323] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:13:13.837 2025] [ 2.174404] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:13:13.837 2025] [ 2.189872] systemd[1]: Started RPC Bind. [Fri Jan 03 14:13:13.837 2025] [ 2.191092] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:13:13.853 2025] [ 2.200251] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:13:13.853 2025] [ 2.204654] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:13:13.853 2025] [ 2.205539] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:13:13.868 2025] [ 2.206689] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:13:13.868 2025] [ 2.212862] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:13:13.884 2025] [ 2.215103] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:13:13.884 2025] [ 2.217650] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:13:13.884 2025] [ 2.220283] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:13:13.899 2025] [ 2.222595] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:13:13.907 2025] [ 2.224131] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:13:13.915 2025] [ 2.224926] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:13:13.915 2025] [ 2.228654] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:13:13.915 2025] [ 2.231163] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:13:13.931 2025] [ 2.232951] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:13:13.931 2025] [ 2.234235] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:13:13.931 2025] [ 2.259689] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:13:13.947 2025] [ 2.264479] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:13:13.947 2025] [ 2.267435] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:13:13.962 2025] [ 2.267999] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:13:13.978 2025] [ 2.272661] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:13:13.978 2025] [ 2.273309] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:13:13.994 2025] [ 2.285289] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:13:14.010 2025] [ 2.291551] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:13:14.010 2025] [ 2.292515] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:13:14.010 2025] [ 2.329910] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:13:14.025 2025] [ 2.347537] systemd[1]: Started Journal Service. [Fri Jan 03 14:13:14.041 2025] [ 2.380681] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:13:14.245 2025] [ 2.757847] random: crng init done [Fri Jan 03 14:13:14.340 2025] [ 2.856898] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:13:14.340 2025] [ 2.856917] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:13:14.355 2025] [ 2.856939] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:13:14.355 2025] [ 2.856984] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:13:14.371 2025] [ 2.857005] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:13:14.371 2025] [ 2.872419] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:13:14.402 2025] [ 2.872786] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:13:14.409 2025] [ 2.872829] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:13:14.418 2025] [ 2.872863] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:13:14.496 2025] [ 2.872893] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:13:14.496 2025] [ 2.872906] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:13:14.509 2025] [ 2.872910] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:13:14.512 2025] [ 2.872921] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:13:14.559 2025] [ 2.872934] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:13:14.575 2025] [ 2.872942] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:13:14.575 2025] [ 2.872946] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:13:14.609 2025] [ 2.872956] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:13:14.622 2025] [ 2.872968] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:13:14.653 2025] [ 2.877878] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:43:30 UTC (1681065810) [Fri Jan 03 14:13:14.669 2025] [ 2.881189] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:13:14.669 2025] [ 2.881205] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:13:14.669 2025] [ 2.881238] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:13:14.684 2025] [ 2.881241] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:13:14.716 2025] [ 2.881274] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:13:14.732 2025] [ 2.888078] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:13:14.763 2025] [ 2.888105] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:13:14.779 2025] [ 2.897219] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:13:14.794 2025] [ 2.897242] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:13:14.810 2025] [ 2.923230] mc: Linux media interface: v0.10 [Fri Jan 03 14:13:14.825 2025] [ 2.945246] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:13:14.825 2025] [ 3.028110] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:13:14.825 2025] [ 3.028298] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:13:14.841 2025] [ 3.028568] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:13:14.841 2025] [ 3.029012] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:13:14.841 2025] [ 3.030030] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:13:14.857 2025] [ 3.030067] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:13:14.857 2025] [ 3.030120] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:13:14.872 2025] [ 3.030129] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:13:14.872 2025] [ 3.265288] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:13:14.888 2025] [ 3.265324] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:13:14.904 2025] [ 3.265329] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:13:14.910 2025] [ 3.265355] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:13:14.920 2025] [ 3.265383] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:13:14.935 2025] [ 3.265399] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:13:14.951 2025] [ 3.265404] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:13:14.951 2025] [ 3.277520] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:13:14.966 2025] [ 3.293671] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:13:14.966 2025] [ 3.297721] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:13:14.982 2025] [ 3.298983] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:13:14.982 2025] [ 3.327975] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:13:14.998 2025] [ 3.328061] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:13:15.010 2025] [ 3.336040] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:13:15.014 2025] [ 3.339218] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:13:15.014 2025] [ 3.339251] Get kick_gpio number= (418) [Fri Jan 03 14:13:15.029 2025] [ 3.347622] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:13:15.029 2025] [ 3.347661] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:13:15.045 2025] [ 3.353371] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:13:15.045 2025] [ 3.353416] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:13:15.076 2025] [ 3.353429] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:13:15.092 2025] [ 3.367523] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:13:15.107 2025] [ 3.368078] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:13:15.634 2025] [ 4.146721] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:13:15.643 2025] [ 4.146742] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:13:15.646 2025] [ 4.146758] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:13:15.664 2025] [ 4.163921] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:13:15.695 2025] [ 4.163977] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:13:15.700 2025] [ 4.163984] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:13:15.706 2025] [ 4.164220] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:13:15.717 2025] [ 4.193278] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:13:15.723 2025] [ 4.196699] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:13:15.821 2025] [ 4.333734] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:13:15.911 2025] [ 4.419934] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:13:15.918 2025] [ 4.419994] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:13:15.926 2025] [ 4.420207] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:13:15.936 2025] [ 4.420216] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:13:15.942 2025] [ 4.431479] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:13:15.948 2025] [ 4.450458] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:13:15.972 2025] [ 4.484691] hub 1-0:1.0: USB hub found [Fri Jan 03 14:13:15.975 2025] [ 4.484752] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:13:16.018 2025] [ 4.530099] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:13:16.028 2025] [ 4.531965] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:13:16.037 2025] [ 4.531994] cfg80211: failed to load regulatory.db [Fri Jan 03 14:13:16.178 2025] [ 4.688057] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:13:16.190 2025] [ 4.688091] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:13:16.213 2025] [ 4.725154] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:13:16.401 2025] [ 4.912898] hub 1-1:1.0: USB hub found [Fri Jan 03 14:13:16.404 2025] [ 4.913070] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:13:16.912 2025] [ 5.423782] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:13:16.953 2025] [ 5.465478] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:13:16.967 2025] [ 5.465514] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:13:17.091 2025] [ 5.603452] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:13:17.099 2025] [ 5.604698] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:17.124 2025] [ 5.637250] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:13:17.133 2025] [ 5.637290] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:17.144 2025] [ 5.654444] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:13:17.148 2025] [ 5.654489] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:17.321 2025] [ 5.834067] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:13:17.396 2025] [ 5.907306] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:13:17.399 2025] [ 5.907754] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:17.727 2025] *************************************************************** [Fri Jan 03 14:13:17.727 2025] *************************************************************** [Fri Jan 03 14:13:17.743 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:13:17.743 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:13:17.743 2025] bash [Fri Jan 03 14:13:17.743 2025] cifs-utils [Fri Jan 03 14:13:17.743 2025] dosfstools [Fri Jan 03 14:13:17.758 2025] grub-common [Fri Jan 03 14:13:17.758 2025] grub-editenv [Fri Jan 03 14:13:17.758 2025] grub-efi [Fri Jan 03 14:13:17.758 2025] less [Fri Jan 03 14:13:17.758 2025] lib32-libgcc1 [Fri Jan 03 14:13:17.758 2025] lib32-libstdc++6 [Fri Jan 03 14:13:17.758 2025] libdw1 [Fri Jan 03 14:13:17.758 2025] libelf1 [Fri Jan 03 14:13:17.758 2025] libgcc1 [Fri Jan 03 14:13:17.758 2025] libgdbm-compat4 [Fri Jan 03 14:13:17.758 2025] libgdbm6 [Fri Jan 03 14:13:17.774 2025] libgmp10 [Fri Jan 03 14:13:17.774 2025] libidn2-0 [Fri Jan 03 14:13:17.774 2025] libreadline8 [Fri Jan 03 14:13:17.774 2025] libstdc++6 [Fri Jan 03 14:13:17.774 2025] libunistring2 [Fri Jan 03 14:13:17.774 2025] libvte-2.91-0 [Fri Jan 03 14:13:17.774 2025] nettle [Fri Jan 03 14:13:17.774 2025] onboard [Fri Jan 03 14:13:17.774 2025] parted [Fri Jan 03 14:13:17.774 2025] rxvt-unicode [Fri Jan 03 14:13:17.774 2025] [Fri Jan 03 14:13:17.774 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:13:17.790 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:13:17.790 2025] the opkg remove command. i.e.: [Fri Jan 03 14:13:17.790 2025] opkg remove [Fri Jan 03 14:13:17.790 2025] Where is the name printed in the list above [Fri Jan 03 14:13:17.805 2025] [Fri Jan 03 14:13:17.805 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:13:17.805 2025] will be notified of the dependent packages. You s[ 6.324445] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:13:17.817 2025] [ 6.325510] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:13:17.821 2025] hould [Fri Jan 03 14:13:17.821 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:13:17.821 2025] also remove the dependent packages as well [Fri Jan 03 14:13:17.837 2025] *************************************************************** [Fri Jan 03 14:13:17.837 2025] *************************************************************** [Fri Jan 03 14:13:22.987 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:13:23.003 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:13:23.097 2025] [Fri Jan 03 14:13:23.097 2025] _____ _____ _ _ [Fri Jan 03 14:13:23.113 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:13:23.113 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:13:23.128 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:13:23.128 2025] |___| |___| [Fri Jan 03 14:13:23.135 2025] [Fri Jan 03 14:13:23.135 2025] Arago Project am62xx-evm - [Fri Jan 03 14:13:23.135 2025] [Fri Jan 03 14:13:23.135 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:13:23.144 2025] [Fri Jan 03 14:13:23.144 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:13:23.191 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:13:23.380 2025] [ 11.893578] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:13:23.380 2025] [ 11.893608] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:13:23.396 2025] [ 11.893630] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.396 2025] [ 11.893689] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:13:23.396 2025] [ 11.893695] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:13:23.411 2025] [ 11.893704] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.411 2025] [ 11.893739] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:13:23.411 2025] [ 11.893745] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:13:23.427 2025] [ 11.893753] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.436 2025] [ 11.902118] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:13:23.436 2025] [ 11.902139] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:13:23.443 2025] [ 11.902168] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.443 2025] [ 11.902299] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:13:23.459 2025] [ 11.902306] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:13:23.459 2025] [ 11.902317] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.459 2025] [ 11.902361] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:13:23.474 2025] [ 11.902369] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:13:23.474 2025] [ 11.902376] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.490 2025] [ 11.902412] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:13:23.490 2025] [ 11.902417] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:13:23.490 2025] [ 11.902425] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:23.505 2025] [ 11.902462] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:13:23.505 2025] [ 11.902468] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:13:23.521 2025] [ 11.902475] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.665 2025] [ 14.189303] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:13:25.680 2025] [ 14.189324] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:13:25.680 2025] [ 14.189343] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.680 2025] [ 14.189396] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:13:25.696 2025] [ 14.189402] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:13:25.696 2025] [ 14.189409] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.711 2025] [ 14.189444] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:13:25.711 2025] [ 14.189449] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:13:25.711 2025] [ 14.189456] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.727 2025] [ 14.189490] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:13:25.727 2025] [ 14.189497] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:13:25.744 2025] [ 14.189504] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.744 2025] [ 14.189538] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:13:25.744 2025] [ 14.189543] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:13:25.759 2025] [ 14.189550] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.759 2025] [ 14.189584] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:13:25.774 2025] [ 14.189589] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:13:25.774 2025] [ 14.189596] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.774 2025] [ 14.189629] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:13:25.790 2025] [ 14.189635] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:13:25.790 2025] [ 14.189644] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:25.790 2025] [ 14.189677] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:13:25.806 2025] [ 14.189683] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:13:25.806 2025] [ 14.189689] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:26.167 2025] [ 14.680566] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:13:29.497 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:13:29.497 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:13:31.284 2025] [ 19.790096] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:13:31.285 2025] [ 19.790119] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:13:31.293 2025] [ 19.790137] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.300 2025] [ 19.790190] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:13:31.306 2025] [ 19.790195] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:13:31.312 2025] [ 19.790202] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.318 2025] [ 19.790244] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:13:31.324 2025] [ 19.790249] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:13:31.330 2025] [ 19.790257] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.337 2025] [ 19.790293] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:13:31.342 2025] [ 19.790300] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:13:31.349 2025] [ 19.790307] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.356 2025] [ 19.790341] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:13:31.361 2025] [ 19.790346] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:13:31.366 2025] [ 19.790353] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.373 2025] [ 19.790386] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:13:31.379 2025] [ 19.790391] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:13:31.385 2025] [ 19.790398] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.394 2025] [ 19.790433] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:13:31.401 2025] [ 19.790442] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:13:31.406 2025] [ 19.790449] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.412 2025] [ 19.790484] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:13:31.418 2025] [ 19.790489] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:13:31.428 2025] [ 19.790496] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.431 2025] [ 19.867205] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:13:31.437 2025] [ 19.867231] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:13:31.443 2025] [ 19.867250] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.451 2025] [ 19.867313] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:13:31.457 2025] [ 19.867318] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:13:31.463 2025] [ 19.867326] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.469 2025] [ 19.867364] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:13:31.475 2025] [ 19.867369] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:13:31.482 2025] [ 19.867378] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.488 2025] [ 19.867417] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:13:31.502 2025] [ 19.867424] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:13:31.503 2025] [ 19.867431] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.510 2025] [ 19.867465] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:13:31.515 2025] [ 19.867470] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:13:31.521 2025] [ 19.867479] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.527 2025] [ 19.867519] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:13:31.533 2025] [ 19.867524] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:13:31.543 2025] [ 19.867531] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.549 2025] [ 19.867566] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:13:31.551 2025] [ 19.867573] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:13:31.558 2025] [ 19.867579] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:13:31.563 2025] [ 19.867613] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:13:31.569 2025] [ 19.867618] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:13:31.577 2025] [ 19.867625] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:03.883 2025] [Fri Jan 03 14:14:03.883 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:14:03.903 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:14:03.953 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:14:03.974 2025] Trying to boot from MMC1 [Fri Jan 03 14:14:04.143 2025] Authentication passed [Fri Jan 03 14:14:04.149 2025] Authentication passed [Fri Jan 03 14:14:04.154 2025] Authentication passed [Fri Jan 03 14:14:04.189 2025] Authentication passed [Fri Jan 03 14:14:04.195 2025] Authentication passed [Fri Jan 03 14:14:04.200 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:14:04.202 2025] [Fri Jan 03 14:14:04.206 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:14:04.209 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:14:04.508 2025] [Fri Jan 03 14:14:04.508 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:14:04.514 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:14:04.557 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:14:04.560 2025] Error: could not access storage. [Fri Jan 03 14:14:04.564 2025] Trying to boot from MMC1 [Fri Jan 03 14:14:04.722 2025] Authentication passed [Fri Jan 03 14:14:04.728 2025] Authentication passed [Fri Jan 03 14:14:05.382 2025] [Fri Jan 03 14:14:05.382 2025] [Fri Jan 03 14:14:05.382 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:14:05.389 2025] [Fri Jan 03 14:14:05.389 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:14:05.389 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:14:05.394 2025] DRAM: 2 GiB [Fri Jan 03 14:14:05.635 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:14:05.639 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:14:05.650 2025] Loading Environment from MMC... OK [Fri Jan 03 14:14:05.856 2025] In: serial [Fri Jan 03 14:14:05.860 2025] Out: serial [Fri Jan 03 14:14:05.864 2025] Err: serial [Fri Jan 03 14:14:05.864 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:14:05.864 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:14:06.027 2025] switch to partitions #0, OK [Fri Jan 03 14:14:06.030 2025] mmc0(part 0) is current device [Fri Jan 03 14:14:06.176 2025] SD/MMC found on device 0 [Fri Jan 03 14:14:06.176 2025] Running eMMC boot ... [Fri Jan 03 14:14:06.194 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:14:06.201 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:14:06.202 2025] Importing environment from mmc0 ... [Fri Jan 03 14:14:06.425 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:14:06.448 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:14:06.450 2025] Working FDT set to 88000000 [Fri Jan 03 14:14:06.454 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:14:06.459 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:14:06.464 2025] Working FDT set to 88000000 [Fri Jan 03 14:14:06.487 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:14:06.493 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:14:06.501 2025] Working FDT set to 8feed000 [Fri Jan 03 14:14:06.512 2025] [Fri Jan 03 14:14:06.512 2025] Starting kernel ... [Fri Jan 03 14:14:06.520 2025] [Fri Jan 03 14:14:06.549 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:14:06.555 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:14:06.573 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:14:06.579 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:14:06.670 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:14:06.674 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:14:06.679 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:14:06.686 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:14:06.694 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:14:06.703 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:14:06.712 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:14:06.723 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:14:06.729 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:14:06.737 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:14:06.747 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:14:06.755 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:14:06.765 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:14:06.772 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:14:06.782 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:14:06.787 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:14:06.792 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:14:06.798 2025] [ 0.000000] Normal empty [Fri Jan 03 14:14:06.799 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:14:06.804 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:14:06.808 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:14:06.814 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:14:06.819 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:14:06.824 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:14:06.831 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:14:06.837 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:14:06.843 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:14:06.854 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:14:06.857 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:14:06.862 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:14:06.867 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:14:06.872 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:14:06.877 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:14:06.883 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:14:06.888 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:14:06.894 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:14:06.899 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:14:06.904 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:14:06.909 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:14:06.916 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:14:06.922 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:14:06.928 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:14:06.934 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:14:06.982 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:14:06.991 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:14:06.999 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:14:07.007 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:14:07.013 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:14:07.032 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:14:07.034 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:14:07.041 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:14:07.047 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:14:07.054 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:14:07.060 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:14:07.068 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:14:07.074 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:14:07.079 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:14:07.086 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:14:07.091 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:14:07.096 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:14:07.100 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:14:07.106 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:14:07.111 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:14:07.116 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:14:07.122 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:14:07.128 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:14:07.140 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:14:07.145 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:14:07.148 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:14:07.155 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:14:07.162 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:14:07.169 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:14:07.174 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:14:07.185 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:14:07.193 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 14:14:07.203 2025] [ 0.528885] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:14:07.211 2025] [ 0.528895] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:14:07.217 2025] [ 0.528982] LSM: Security Framework initializing [Fri Jan 03 14:14:07.222 2025] [ 0.529118] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:14:07.229 2025] [ 0.529142] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:14:07.237 2025] [ 0.530833] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:14:07.243 2025] [ 0.530841] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:14:07.248 2025] [ 0.530883] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:14:07.257 2025] [ 0.583351] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:14:07.260 2025] [ 0.583588] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:14:07.269 2025] [ 0.583678] EFI services will not be available. [Fri Jan 03 14:14:07.274 2025] [ 0.583934] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:14:07.280 2025] [ 0.584704] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:14:07.285 2025] [ 0.584817] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:14:07.290 2025] [ 0.584834] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:14:07.297 2025] [ 0.584888] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:14:07.308 2025] [ 0.634973] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:14:07.309 2025] [ 0.635056] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:14:07.317 2025] [ 0.635070] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:14:07.324 2025] [ 0.635102] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:14:07.334 2025] [ 0.660979] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:14:07.335 2025] [ 0.661064] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:14:07.342 2025] [ 0.661078] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:14:07.350 2025] [ 0.661106] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:14:07.356 2025] [ 0.661163] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:14:07.362 2025] [ 0.661170] SMP: Total of 4 processors activated. [Fri Jan 03 14:14:07.368 2025] [ 0.695352] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:14:07.373 2025] [ 0.695355] CPU features: detected: CRC32 instructions [Fri Jan 03 14:14:07.378 2025] [ 0.695404] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:14:07.383 2025] [ 0.695406] alternatives: applying system-wide alternatives [Fri Jan 03 14:14:07.389 2025] [ 0.696948] devtmpfs: initialized [Fri Jan 03 14:14:07.393 2025] [ 0.708614] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:14:07.400 2025] [ 0.708641] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:14:07.407 2025] [ 0.713887] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:14:07.412 2025] [ 0.714719] DMI not present or invalid. [Fri Jan 03 14:14:07.417 2025] [ 0.715248] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:14:07.422 2025] [ 0.729166] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:14:07.430 2025] [ 0.729450] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:14:07.440 2025] [ 0.729640] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:14:07.445 2025] [ 0.729777] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:14:07.451 2025] [ 0.729971] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:14:07.458 2025] [ 0.730610] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:14:07.465 2025] [ 0.730615] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:14:07.472 2025] [ 0.730861] ASID allocator initialised with 65536 entries [Fri Jan 03 14:14:07.477 2025] [ 0.745766] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:14:07.484 2025] [ 0.754916] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:14:07.495 2025] [ 0.754926] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:14:07.498 2025] [ 0.754931] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:14:07.504 2025] [ 0.754933] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:14:07.511 2025] [ 0.754937] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:14:07.518 2025] [ 0.754939] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:14:07.525 2025] [ 0.754943] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:14:07.532 2025] [ 0.754946] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:14:07.538 2025] [ 0.756086] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:14:07.550 2025] [ 0.756598] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:14:07.557 2025] [ 0.756606] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:14:07.560 2025] [ 0.756619] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:14:07.569 2025] [ 0.756634] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:14:07.578 2025] [ 0.756645] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.585 2025] [ 0.756651] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:14:07.592 2025] [ 0.756872] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:14:07.599 2025] [ 0.756877] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:14:07.605 2025] [ 0.756887] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:14:07.614 2025] [ 0.756899] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:14:07.623 2025] [ 0.756908] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.631 2025] [ 0.756912] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:14:07.639 2025] [ 0.757163] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:14:07.646 2025] [ 0.757168] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:14:07.652 2025] [ 0.757180] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:14:07.660 2025] [ 0.757193] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:14:07.668 2025] [ 0.757201] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.676 2025] [ ‚rºªº’‚ªêreg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:14:07.690 2025] [ 1[.013558] printk: console [ttyS2] printing thread started [Fri Jan 03 14:14:07.692 2025] 0.757421] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:14:07.700 2025] [ 1.013579] printk: console [ttyS2] enabled [Fri Jan 03 14:14:07.706 2025] [ 1.013583] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:14:07.714 2025] [ 1.026156] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:14:07.720 2025] [ 1.027359] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:14:07.726 2025] [ 1.027369] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:14:07.732 2025] [ 1.027380] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:14:07.740 2025] [ 1.027398] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:14:07.747 2025] [ 1.027410] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.754 2025] [ 1.027415] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:14:07.762 2025] [ 1.027445] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:14:07.769 2025] [ 1.028378] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:14:07.777 2025] [ 1.028387] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:14:07.784 2025] [ 1.028398] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:14:07.792 2025] [ 1.028413] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:14:07.801 2025] [ 1.028422] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.808 2025] [ 1.028427] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:14:07.815 2025] [ 1.031474] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:14:07.822 2025] [ 1.038605] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:14:07.828 2025] [ 1.045154] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:14:07.835 2025] [ 1.045579] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:14:07.842 2025] [ 1.045585] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:14:07.849 2025] [ 1.045602] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:14:07.861 2025] [ 1.045619] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:14:07.866 2025] [ 1.045633] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.873 2025] [ 1.045638] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:14:07.880 2025] [ 1.079041] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:14:07.887 2025] [ 1.079333] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:14:07.894 2025] [ 1.080148] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:14:07.902 2025] [ 1.080157] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:14:07.908 2025] [ 1.080174] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:14:07.918 2025] [ 1.080199] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:14:07.930 2025] [ 1.080214] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:14:07.937 2025] [ 1.080218] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:14:07.944 2025] [ 1.080964] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:14:07.952 2025] [ 1.081007] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:14:07.964 2025] [ 1.081267] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:14:07.971 2025] [ 1.081278] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:14:07.979 2025] [ 1.081283] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:14:07.985 2025] [ 1.082060] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:14:07.993 2025] [ 1.098573] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:14:07.999 2025] [ 1.103428] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:14:08.004 2025] [ 1.103432] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:14:08.014 2025] [ 1.103443] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:14:08.020 2025] [ 1.103456] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:14:08.029 2025] [ 1.103479] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:14:08.039 2025] [ 1.103491] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:14:08.046 2025] [ 1.103499] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:14:08.052 2025] [ 1.103524] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:14:08.062 2025] [ 1.103528] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:14:08.065 2025] [ 1.103537] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:14:08.075 2025] [ 1.103551] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:14:08.084 2025] [ 1.103560] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:14:08.091 2025] [ 1.103564] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:14:08.097 2025] [ 1.103571] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:14:08.104 2025] [ 1.103575] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:14:08.110 2025] [ 1.103583] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:14:08.118 2025] [ 1.103595] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:14:08.128 2025] [ 1.103604] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:14:08.138 2025] [ 1.103608] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:14:08.140 2025] [ 1.104098] mmc1: CQHCI version 5.10 [Fri Jan 03 14:14:08.145 2025] [ 1.104801] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:14:08.151 2025] [ 1.104815] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:14:08.157 2025] [ 1.104831] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:14:08.166 2025] [ 1.104863] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:14:08.181 2025] [ 1.104885] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:14:08.186 2025] [ 1.104891] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:14:08.190 2025] [ 1.104946] mmc0: CQHCI version 5.10 [Fri Jan 03 14:14:08.196 2025] [ 1.105569] mmc2: CQHCI version 5.10 [Fri Jan 03 14:14:08.200 2025] [ 1.107680] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:14:08.206 2025] [ 1.110216] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:14:08.216 2025] [ 1.113187] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:14:08.221 2025] [ 1.113378] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:14:08.227 2025] [ 1.113445] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:14:08.234 2025] [ 1.116573] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:14:08.239 2025] [ 1.116780] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:14:08.249 2025] [ 1.116845] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:14:08.252 2025] [ 1.118428] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:14:08.259 2025] [ 1.118438] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:14:08.269 2025] [ 1.118459] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:14:08.274 2025] [ 1.118475] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:14:08.280 2025] [ 1.118491] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:14:08.290 2025] [ 1.118495] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:14:08.293 2025] [ 1.118504] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:14:08.306 2025] [ 1.118515] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:14:08.311 2025] [ 1.118524] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:14:08.318 2025] [ 1.118528] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:14:08.325 2025] [ 1.118971] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:14:08.331 2025] [ 1.118975] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:14:08.339 2025] [ 1.118988] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:14:08.347 2025] [ 1.119000] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:14:08.353 2025] [ 1.119004] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:14:08.363 2025] [ 1.119523] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:14:08.368 2025] [ 1.119539] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:14:08.375 2025] [ 1.119542] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:14:08.380 2025] [ 1.119632] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:14:08.388 2025] [ 1.119647] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:14:08.395 2025] [ 1.119651] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:14:08.400 2025] [ 1.119713] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:14:08.408 2025] [ 1.119725] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:14:08.415 2025] [ 1.119728] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:14:08.420 2025] [ 1.120395] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:14:08.426 2025] [ 1.123042] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:14:08.434 2025] [ 1.135335] ALSA device list: [Fri Jan 03 14:14:08.439 2025] [ 1.135346] No soundcards found. [Fri Jan 03 14:14:08.443 2025] [ 1.140540] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:14:08.449 2025] [ 1.145456] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:14:08.456 2025] [ 1.155270] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:14:08.467 2025] [ 1.174459] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:14:08.470 2025] [ 1.201337] mmc1: new MMC card at address 0001 [Fri Jan 03 14:14:08.476 2025] [ 1.202172] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:14:08.482 2025] [ 1.210300] mmcblk1: p1 [Fri Jan 03 14:14:08.486 2025] [ 1.211142] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:14:08.491 2025] [ 1.212789] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:14:08.497 2025] [ 1.214150] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:14:08.502 2025] [ 1.294262] mmc0: Command Queue Engine enabled [Fri Jan 03 14:14:08.506 2025] [ 1.294279] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:14:08.511 2025] [ 1.295067] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:14:08.516 2025] [ 1.299111] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:14:08.520 2025] [ 1.300169] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:14:08.528 2025] [ 1.301533] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:14:08.529 2025] [ 1.302675] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:14:08.534 2025] [ 1.327358] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:14:08.540 2025] [ 1.327746] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:08.546 2025] [ 1.327822] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:14:08.552 2025] [ 1.327964] devtmpfs: mounted [Fri Jan 03 14:14:08.557 2025] [ 1.329390] Freeing unused kernel memory: 1856K [Fri Jan 03 14:14:08.564 2025] [ 1.329505] Run /sbin/init as init process [Fri Jan 03 14:14:08.564 2025] [ 1.329509] with arguments: [Fri Jan 03 14:14:08.569 2025] [ 1.329511] /sbin/init [Fri Jan 03 14:14:08.573 2025] [ 1.329512] with environment: [Fri Jan 03 14:14:08.574 2025] [ 1.329514] HOME=/ [Fri Jan 03 14:14:08.578 2025] [ 1.329516] TERM=linux [Fri Jan 03 14:14:08.583 2025] [ 1.329518] syntec_extend= [Fri Jan 03 14:14:08.587 2025] [ 1.420597] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:14:08.591 2025] [ 1.447093] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:14:08.596 2025] [ 1.448310] Segment Routing with IPv6 [Fri Jan 03 14:14:08.601 2025] [ 1.448346] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:14:08.605 2025] [ 1.497046] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:14:08.631 2025] [ 1.497608] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:14:08.636 2025] [ 1.500964] systemd[1]: Hostname set to . [Fri Jan 03 14:14:08.641 2025] [ 1.617247] systemd-sysv-generator[183]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:14:08.665 2025] [ 1.932115] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:14:08.684 2025] [ 1.934921] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:14:08.701 2025] [ 1.997327] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:14:08.708 2025] [ 2.000798] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:14:08.714 2025] [ 2.002345] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:14:08.720 2025] [ 2.002805] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:14:08.726 2025] [ 2.003184] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:14:08.733 2025] [ 2.003402] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:14:08.741 2025] [ 2.003742] systemd[1]: Reached target Path Units. [Fri Jan 03 14:14:08.746 2025] [ 2.003834] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:14:08.752 2025] [ 2.003894] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:14:08.757 2025] [ 2.003985] systemd[1]: Reached target Swaps. [Fri Jan 03 14:14:08.763 2025] [ 2.008217] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:14:08.768 2025] [ 2.008393] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:14:08.774 2025] [ 2.014423] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:14:08.779 2025] [ 2.014871] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:14:08.789 2025] [ 2.015719] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:14:08.791 2025] [ 2.016319] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:14:08.798 2025] [ 2.016897] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:14:08.804 2025] [ 2.017670] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:14:08.810 2025] [ 2.019557] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:14:08.816 2025] [ 2.020089] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:14:08.821 2025] [ 2.020602] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:14:08.827 2025] [ 2.056797] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:14:08.833 2025] [ 2.060925] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:14:08.839 2025] [ 2.065414] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:14:08.844 2025] [ 2.066277] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:14:08.855 2025] [ 2.068208] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:14:08.868 2025] [ 2.072902] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:14:08.872 2025] [ 2.080298] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:14:08.880 2025] [ 2.085176] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:14:08.890 2025] [ 2.090580] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:14:08.893 2025] [ 2.095488] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:14:08.899 2025] [ 2.102065] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:14:08.904 2025] [ 2.102565] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:14:08.918 2025] [ 2.103966] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:14:08.932 2025] [ 2.103993] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:14:08.936 2025] [ 2.107563] systemd[1]: Starting Journal Service... [Fri Jan 03 14:14:08.942 2025] [ 2.111770] fuse: init (API version 7.37) [Fri Jan 03 14:14:08.948 2025] [ 2.115356] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:14:08.953 2025] [ 2.120320] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:14:08.959 2025] [ 2.125549] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:14:08.965 2025] [ 2.131009] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:14:08.972 2025] [ 2.136056] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:14:08.982 2025] [ 2.153135] systemd[1]: Started RPC Bind. [Fri Jan 03 14:14:08.983 2025] [ 2.157315] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:14:08.988 2025] [ 2.158934] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:14:08.993 2025] [ 2.165529] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:14:08.999 2025] [ 2.166274] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:14:09.004 2025] [ 2.169333] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:14:09.009 2025] [ 2.174211] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:14:09.015 2025] [ 2.175509] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:14:09.021 2025] [ 2.177661] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:14:09.030 2025] [ 2.180186] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:14:09.033 2025] [ 2.183634] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:14:09.040 2025] [ 2.186596] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:14:09.050 2025] [ 2.199566] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:14:09.053 2025] [ 2.204075] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:14:09.060 2025] [ 2.204766] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:14:09.066 2025] [ 2.208815] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:14:09.071 2025] [ 2.210168] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:14:09.078 2025] [ 2.211973] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:14:09.088 2025] [ 2.267466] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:14:09.090 2025] [ 2.282171] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:14:09.097 2025] [ 2.285305] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:14:09.107 2025] [ 2.285729] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:14:09.125 2025] [ 2.290387] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:14:09.131 2025] [ 2.290890] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:14:09.137 2025] [ 2.298289] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:14:09.145 2025] [ 2.317383] systemd[1]: Started Journal Service. [Fri Jan 03 14:14:09.152 2025] [ 2.392985] systemd-journald[193]: Received client request to flush runtime journal. [Fri Jan 03 14:14:09.427 2025] [ 2.753066] random: crng init done [Fri Jan 03 14:14:09.497 2025] [ 2.825339] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:14:09.505 2025] [ 2.825357] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:14:09.512 2025] [ 2.825370] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:14:09.525 2025] [ 2.825409] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:14:09.532 2025] [ 2.825427] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:14:09.542 2025] [ 2.832693] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:14:09.549 2025] [ 2.832710] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:14:09.556 2025] [ 2.832745] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:14:09.572 2025] [ 2.832768] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:14:09.581 2025] [ 2.832778] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:14:09.585 2025] [ 2.832783] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:14:09.585 2025] [ 2.832796] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:14:09.632 2025] [ 2.832810] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:14:09.675 2025] [ 2.832818] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:14:09.726 2025] [ 2.832822] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:14:09.742 2025] [ 2.832833] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:14:09.775 2025] [ 2.832843] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:14:09.789 2025] [ 2.836654] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:14:09.789 2025] [ 2.836670] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:14:09.805 2025] [ 2.836700] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:14:09.821 2025] [ 2.836703] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:14:09.837 2025] [ 2.836734] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:14:09.837 2025] [ 2.879681] mc: Linux media interface: v0.10 [Fri Jan 03 14:14:09.837 2025] [ 2.882784] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:14:09.852 2025] [ 2.883897] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:44:25 UTC (1681065865) [Fri Jan 03 14:14:09.852 2025] [ 2.884187] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:14:09.884 2025] [ 2.884206] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:14:09.899 2025] [ 2.887988] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:14:09.915 2025] [ 2.888069] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:14:09.946 2025] [ 2.918447] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:14:09.963 2025] [ 3.041332] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:14:09.979 2025] [ 3.041746] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:14:09.979 2025] [ 3.041946] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:14:10.010 2025] [ 3.047568] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:14:10.010 2025] [ 3.048842] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:14:10.026 2025] [ 3.048877] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:14:10.026 2025] [ 3.048919] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:14:10.041 2025] [ 3.048928] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:14:10.057 2025] [ 3.187533] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:14:10.057 2025] [ 3.187561] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:14:10.076 2025] [ 3.187567] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:14:10.088 2025] [ 3.187590] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:14:10.104 2025] [ 3.187618] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:14:10.120 2025] [ 3.187634] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:14:10.120 2025] [ 3.187640] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:14:10.151 2025] [ 3.194278] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:14:10.151 2025] [ 3.194438] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:14:10.167 2025] [ 3.194601] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:14:10.182 2025] [ 3.194979] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:14:10.198 2025] [ 3.195132] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:14:10.214 2025] [ 3.198640] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:14:10.230 2025] [ 3.198683] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:14:10.245 2025] [ 3.199607] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:14:10.245 2025] [ 3.199654] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:14:10.261 2025] [ 3.199662] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:14:10.277 2025] [ 3.230997] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:14:10.292 2025] [ 3.268235] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:14:10.308 2025] [ 3.268472] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:14:10.308 2025] [ 3.341974] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:14:10.308 2025] [ 3.350394] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:14:10.324 2025] [ 3.350432] Get kick_gpio number= (418) [Fri Jan 03 14:14:10.828 2025] [ 4.167332] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:14:10.843 2025] [ 4.167353] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:14:10.843 2025] [ 4.167371] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:14:10.859 2025] [ 4.167408] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:14:10.879 2025] [ 4.167423] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:14:10.890 2025] [ 4.167430] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:14:10.906 2025] [ 4.167602] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:14:10.906 2025] [ 4.167955] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:14:11.016 2025] [ 4.353616] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:14:11.032 2025] [ 4.354931] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:14:11.047 2025] [ 4.365772] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:14:11.047 2025] [ 4.367406] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:14:11.063 2025] [ 4.367447] cfg80211: failed to load regulatory.db [Fri Jan 03 14:14:11.205 2025] [ 4.543624] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:14:11.220 2025] [ 4.543661] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:14:11.267 2025] [ 4.604647] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:14:11.331 2025] [ 4.669709] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:14:11.346 2025] [ 4.669758] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:14:11.346 2025] [ 4.669960] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:14:11.380 2025] [ 4.669970] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:14:11.393 2025] [ 4.685591] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:14:11.393 2025] [ 4.696783] hub 1-0:1.0: USB hub found [Fri Jan 03 14:14:11.409 2025] [ 4.698569] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:14:11.621 2025] [ 4.949114] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:14:11.805 2025] [ 5.134529] hub 1-1:1.0: USB hub found [Fri Jan 03 14:14:11.812 2025] [ 5.139495] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:14:12.119 2025] [ 5.445434] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:14:12.177 2025] [ 5.505998] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:14:12.190 2025] [ 5.506085] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:14:12.406 2025] [ 5.735052] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:14:12.415 2025] [ 5.735099] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:12.427 2025] [ 5.753849] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:14:12.432 2025] [ 5.753895] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:12.453 2025] [ 5.765232] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:14:12.458 2025] [ 5.765282] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:12.463 2025] [ 5.768642] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:14:12.522 2025] [ 5.850379] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:14:12.529 2025] [ 5.853580] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:13.086 2025] *************************************************************** [Fri Jan 03 14:14:13.090 2025] *************************************************************** [Fri Jan 03 14:14:13.096 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:14:13.103 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:14:13.107 2025] bash [Fri Jan 03 14:14:13.107 2025] cifs-utils [Fri Jan 03 14:14:13.108 2025] dosfstools [Fri Jan 03 14:14:13.108 2025] grub-common [Fri Jan 03 14:14:13.113 2025] grub-editenv [Fri Jan 03 14:14:13.113 2025] grub-efi [Fri Jan 03 14:14:13.113 2025] less [Fri Jan 03 14:14:13.113 2025] lib32-libgcc1 [Fri Jan 03 14:14:13.117 2025] lib32-libstdc++6 [Fri Jan 03 14:14:13.121 2025] libdw1 [Fri Jan 03 14:14:13.121 2025] libelf1 [Fri Jan 03 14:14:13.121 2025] libgcc1 [Fri Jan 03 14:14:13.121 2025] libgdbm-compat4 [Fri Jan 03 14:14:13.125 2025] libgdbm6 [Fri Jan 03 14:14:13.125 2025] libgmp10 [Fri Jan 03 14:14:13.125 2025] libidn2-0 [Fri Jan 03 14:14:13.130 2025] libreadline8 [Fri Jan 03 14:14:13.130 2025] libstdc++6 [Fri Jan 03 14:14:13.130 2025] libunistring2 [Fri Jan 03 14:14:13.130 2025] libvte-2.91-0 [Fri Jan 03 14:14:13.134 2025] nettle [Fri Jan 03 14:14:13.134 2025] onboard [Fri Jan 03 14:14:13.135 2025] parted [Fri Jan 03 14:14:13.135 2025] rxvt-unicode [Fri Jan 03 14:14:13.139 2025] [Fri Jan 03 14:14:13.139 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:14:13.143 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:14:13.148 2025] the opkg remove command. i.e.: [Fri Jan 03 14:14:13.152 2025] opkg remove [Fri Jan 03 14:14:13.152 2025] Where is the name printed in the list above [Fri Jan 03 14:14:13.157 2025] [Fri Jan 03 14:14:13.157 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:14:13.162 2025] will be notified of the dependent packages. You s[ 6.490322] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:14:13.169 2025] hould [Fri Jan 03 14:14:13.169 2025] use the --force-removal-of-dependent-packages optio[ 6.491396] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:14:13.185 2025] n to [Fri Jan 03 14:14:13.186 2025] also remove the dependent packages as well [Fri Jan 03 14:14:13.191 2025] *************************************************************** [Fri Jan 03 14:14:13.196 2025] *************************************************************** [Fri Jan 03 14:14:18.093 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:14:18.093 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:14:18.106 2025] [Fri Jan 03 14:14:18.106 2025] _____ _____ _ _ [Fri Jan 03 14:14:18.111 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:14:18.117 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:14:18.122 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:14:18.128 2025] |___| |___| [Fri Jan 03 14:14:18.133 2025] [Fri Jan 03 14:14:18.133 2025] Arago Project am62xx-evm - [Fri Jan 03 14:14:18.133 2025] [Fri Jan 03 14:14:18.133 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:14:18.138 2025] [Fri Jan 03 14:14:18.138 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:14:18.277 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:14:18.469 2025] [ 11.798769] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:14:18.475 2025] [ 11.798792] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:14:18.481 2025] [ 11.798807] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.487 2025] [ 11.798859] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:14:18.493 2025] [ 11.798865] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:14:18.499 2025] [ 11.798871] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.510 2025] [ 11.798911] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:14:18.516 2025] [ 11.798916] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:14:18.517 2025] [ 11.798923] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.525 2025] [ 11.798957] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:14:18.530 2025] [ 11.798962] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:14:18.536 2025] [ 11.798969] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.542 2025] [ 11.799002] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:14:18.548 2025] [ 11.799007] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:14:18.553 2025] [ 11.799073] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.560 2025] [ 11.799113] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:14:18.567 2025] [ 11.799118] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:14:18.573 2025] [ 11.799129] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.579 2025] [ 11.799164] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:14:18.585 2025] [ 11.799169] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:14:18.590 2025] [ 11.799176] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:18.597 2025] [ 11.799213] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:14:18.603 2025] [ 11.799218] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:14:18.613 2025] [ 11.799225] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.719 2025] [ 14.058273] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:14:20.734 2025] [ 14.058296] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:14:20.734 2025] [ 14.058317] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.734 2025] [ 14.058364] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:14:20.750 2025] [ 14.058369] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:14:20.750 2025] [ 14.058375] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.766 2025] [ 14.058412] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:14:20.766 2025] [ 14.058417] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:14:20.766 2025] [ 14.058425] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.781 2025] [ 14.058463] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:14:20.781 2025] [ 14.058469] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:14:20.781 2025] [ 14.058476] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.797 2025] [ 14.058508] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:14:20.803 2025] [ 14.058513] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:14:20.813 2025] [ 14.058520] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.813 2025] [ 14.058554] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:14:20.813 2025] [ 14.058559] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:14:20.829 2025] [ 14.058566] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.829 2025] [ 14.058598] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:14:20.844 2025] [ 14.058603] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:14:20.844 2025] [ 14.058612] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:20.844 2025] [ 14.058645] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:14:20.860 2025] [ 14.058650] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:14:20.860 2025] [ 14.058656] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:21.206 2025] [ 14.546238] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:14:24.473 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:14:24.480 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:14:26.232 2025] [ 19.567366] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:14:26.232 2025] [ 19.567394] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:14:26.248 2025] [ 19.567414] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.248 2025] [ 19.567471] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:14:26.248 2025] [ 19.567476] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:14:26.264 2025] [ 19.567484] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.264 2025] [ 19.567521] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:14:26.280 2025] [ 19.567526] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:14:26.280 2025] [ 19.567534] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.280 2025] [ 19.567569] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:14:26.296 2025] [ 19.567574] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:14:26.296 2025] [ 19.567581] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.311 2025] [ 19.567617] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:14:26.311 2025] [ 19.567622] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:14:26.325 2025] [ 19.567632] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.327 2025] [ 19.567668] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:14:26.327 2025] [ 19.567676] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:14:26.343 2025] [ 19.567684] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.343 2025] [ 19.567717] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:14:26.358 2025] [ 19.567722] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:14:26.358 2025] [ 19.567730] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.374 2025] [ 19.567769] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:14:26.374 2025] [ 19.567773] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:14:26.374 2025] [ 19.567781] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.390 2025] [ 19.633826] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:14:26.390 2025] [ 19.633851] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:14:26.390 2025] [ 19.633876] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.405 2025] [ 19.633953] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:14:26.405 2025] [ 19.633959] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:14:26.405 2025] [ 19.633970] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.425 2025] [ 19.638795] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:14:26.425 2025] [ 19.638822] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:14:26.437 2025] [ 19.638845] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.437 2025] [ 19.638975] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:14:26.453 2025] [ 19.638981] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:14:26.453 2025] [ 19.638991] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.453 2025] [ 19.639108] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:14:26.468 2025] [ 19.639114] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:14:26.468 2025] [ 19.639122] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.468 2025] [ 19.646008] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:14:26.484 2025] [ 19.646043] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:14:26.484 2025] [ 19.646065] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.499 2025] [ 19.646172] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:14:26.499 2025] [ 19.646179] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:14:26.499 2025] [ 19.646186] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:26.515 2025] [ 19.646230] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:14:26.515 2025] [ 19.646235] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:14:26.525 2025] [ 19.646242] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:14:58.926 2025] [Fri Jan 03 14:14:58.926 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:14:58.947 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:14:58.996 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:14:59.012 2025] Trying to boot from MMC1 [Fri Jan 03 14:14:59.185 2025] Authentication passed [Fri Jan 03 14:14:59.185 2025] Authentication passed [Fri Jan 03 14:14:59.201 2025] Authentication passed [Fri Jan 03 14:14:59.229 2025] Authentication passed [Fri Jan 03 14:14:59.229 2025] Authentication passed [Fri Jan 03 14:14:59.248 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:14:59.248 2025] [Fri Jan 03 14:14:59.252 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:14:59.256 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:14:59.556 2025] [Fri Jan 03 14:14:59.556 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:14:59.562 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:14:59.603 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:14:59.606 2025] Error: could not access storage. [Fri Jan 03 14:14:59.612 2025] Trying to boot from MMC1 [Fri Jan 03 14:14:59.770 2025] Authentication passed [Fri Jan 03 14:14:59.774 2025] Authentication passed [Fri Jan 03 14:15:00.428 2025] [Fri Jan 03 14:15:00.428 2025] [Fri Jan 03 14:15:00.428 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:15:00.435 2025] [Fri Jan 03 14:15:00.435 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:15:00.438 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:15:00.443 2025] DRAM: 2 GiB [Fri Jan 03 14:15:00.680 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:15:00.685 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:15:00.697 2025] Loading Environment from MMC... OK [Fri Jan 03 14:15:00.900 2025] In: serial [Fri Jan 03 14:15:00.900 2025] Out: serial [Fri Jan 03 14:15:00.904 2025] Err: serial [Fri Jan 03 14:15:00.909 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:15:00.909 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:15:01.066 2025] switch to partitions #0, OK [Fri Jan 03 14:15:01.070 2025] mmc0(part 0) is current device [Fri Jan 03 14:15:01.214 2025] SD/MMC found on device 0 [Fri Jan 03 14:15:01.217 2025] Running eMMC boot ... [Fri Jan 03 14:15:01.234 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:15:01.237 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:15:01.243 2025] Importing environment from mmc0 ... [Fri Jan 03 14:15:01.467 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:15:01.487 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:15:01.490 2025] Working FDT set to 88000000 [Fri Jan 03 14:15:01.496 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:15:01.500 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:15:01.505 2025] Working FDT set to 88000000 [Fri Jan 03 14:15:01.531 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:15:01.535 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:15:01.545 2025] Working FDT set to 8feed000 [Fri Jan 03 14:15:01.553 2025] [Fri Jan 03 14:15:01.553 2025] Starting kernel ... [Fri Jan 03 14:15:01.561 2025] [Fri Jan 03 14:15:01.589 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:15:01.600 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:15:01.616 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:15:01.623 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:15:01.713 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:15:01.716 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:15:01.722 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:15:01.730 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:15:01.739 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:15:01.745 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:15:01.756 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:15:01.764 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:15:01.772 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:15:01.780 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:15:01.789 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:15:01.799 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:15:01.807 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:15:01.816 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:15:01.824 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:15:01.831 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:15:01.837 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:15:01.842 2025] [ 0.000000] Normal empty [Fri Jan 03 14:15:01.843 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:15:01.848 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:15:01.853 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:15:01.858 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:15:01.865 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:15:01.869 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:15:01.875 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:15:01.883 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:15:01.888 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:15:01.895 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:15:01.901 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:15:01.906 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:15:01.912 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:15:01.917 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:15:01.922 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:15:01.927 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:15:01.933 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:15:01.938 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:15:01.944 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:15:01.944 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:15:01.952 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:15:01.959 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:15:01.966 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:15:01.972 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:15:01.980 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:15:02.023 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:15:02.032 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:15:02.041 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:15:02.048 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:15:02.055 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:15:02.073 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:15:02.079 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:15:02.085 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:15:02.090 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:15:02.097 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:15:02.103 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:15:02.109 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:15:02.116 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:15:02.122 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:15:02.128 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:15:02.135 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:15:02.140 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:15:02.142 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:15:02.147 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:15:02.152 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:15:02.159 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:15:02.165 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:15:02.171 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:15:02.180 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:15:02.185 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:15:02.191 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:15:02.196 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:15:02.203 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:15:02.210 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:15:02.216 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:15:02.229 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:15:02.237 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:15:02.242 2025] [ 0.528878] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:15:02.252 2025] [ 0.528888] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:15:02.258 2025] [ 0.528974] LSM: Security Framework initializing [Fri Jan 03 14:15:02.265 2025] [ 0.529107] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:15:02.271 2025] [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:15:02.279 2025] [ 0.530824] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:15:02.285 2025] [ 0.530830] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:15:02.291 2025] [ 0.530874] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:15:02.296 2025] [ 0.583332] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:15:02.303 2025] [ 0.583577] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:15:02.313 2025] [ 0.583665] EFI services will not be available. [Fri Jan 03 14:15:02.319 2025] [ 0.583924] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:15:02.325 2025] [ 0.584693] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:15:02.330 2025] [ 0.584807] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:15:02.336 2025] [ 0.584823] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:15:02.342 2025] [ 0.584879] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:15:02.348 2025] [ 0.634962] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:15:02.354 2025] [ 0.635048] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:15:02.361 2025] [ 0.635061] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:15:02.368 2025] [ 0.635096] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:15:02.374 2025] [ 0.660973] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:15:02.380 2025] [ 0.661055] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:15:02.386 2025] [ 0.661068] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:15:02.392 2025] [ 0.661101] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:15:02.400 2025] [ 0.661161] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:15:02.405 2025] [ 0.661167] SMP: Total of 4 processors activated. [Fri Jan 03 14:15:02.415 2025] [ 0.695357] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:15:02.417 2025] [ 0.695361] CPU features: detected: CRC32 instructions [Fri Jan 03 14:15:02.422 2025] [ 0.695406] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:15:02.426 2025] [ 0.695408] alternatives: applying system-wide alternatives [Fri Jan 03 14:15:02.431 2025] [ 0.696881] devtmpfs: initialized [Fri Jan 03 14:15:02.435 2025] [ 0.708493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:15:02.442 2025] [ 0.708520] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:15:02.455 2025] [ 0.713685] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:15:02.457 2025] [ 0.714485] DMI not present or invalid. [Fri Jan 03 14:15:02.464 2025] [ 0.715010] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:15:02.470 2025] [ 0.736316] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:15:02.475 2025] [ 0.736610] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:15:02.481 2025] [ 0.736802] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:15:02.488 2025] [ 0.736893] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:15:02.495 2025] [ 0.737063] audit: type=2000 audit(0.734:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:15:02.502 2025] [ 0.737679] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:15:02.508 2025] [ 0.737684] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:15:02.516 2025] [ 0.737940] ASID allocator initialised with 65536 entries [Fri Jan 03 14:15:02.522 2025] [ 0.752879] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:15:02.530 2025] [ 0.761987] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:02.537 2025] [ 0.761997] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:15:02.543 2025] [ 0.762001] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:02.551 2025] [ 0.762004] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:15:02.556 2025] [ 0.762008] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:02.563 2025] [ 0.762010] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:15:02.570 2025] [ 0.762014] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:02.578 2025] [ 0.762018] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:15:02.583 2025] [ 0.763321] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:15:02.589 2025] [ 0.763795] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:15:02.598 2025] [ 0.763802] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:15:02.605 2025] [ 0.763816] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:15:02.612 2025] [ 0.763831] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:15:02.620 2025] [ 0.763842] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.628 2025] [ 0.763848] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:15:02.635 2025] [ 0.764076] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:15:02.641 2025] [ 0.764080] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:15:02.649 2025] [ 0.764089] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:15:02.657 2025] [ 0.764102] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:15:02.665 2025] [ 0.764110] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.672 2025] [ 0.764114] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:15:02.681 2025] [ 0.764342] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:15:02.690 2025] [ 0.764347] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:15:02.694 2025] [ 0.764357] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:15:02.701 2025] [ 0.764369] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:15:02.712 2025] [ 0.764377] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.717 2025] [ 0.764381] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:15:02.724 2025] [ 0.764624] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:15:02.731 2025] [ 0.764629] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:15:02.740 2025] [ 0.764638] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:15:02.748 2025] [ [ 1.036931] printk: console [ttyS2] printing thread started [Fri Jan 03 14:15:02.754 2025] 0.764651] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:15:02.762 2025] [ 1.036953] printk: console [ttyS2] enabled [Fri Jan 03 14:15:02.770 2025] [ 1.036957] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:15:02.774 2025] [ 1.051039] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:15:02.780 2025] [ 1.052247] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:15:02.786 2025] [ 1.052257] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:15:02.792 2025] [ 1.052269] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:15:02.802 2025] [ 1.052287] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:15:02.813 2025] [ 1.052299] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.820 2025] [ 1.052304] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:15:02.826 2025] [ 1.052334] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:15:02.836 2025] [ 1.053251] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:15:02.841 2025] [ 1.053260] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:15:02.847 2025] [ 1.053272] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:15:02.855 2025] [ 1.053287] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:15:02.865 2025] [ 1.053297] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.872 2025] [ 1.053301] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:15:02.878 2025] [ 1.056315] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:15:02.885 2025] [ 1.062663] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:15:02.891 2025] [ 1.069268] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:15:02.898 2025] [ 1.069744] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:15:02.905 2025] [ 1.069750] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:15:02.912 2025] [ 1.069766] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:15:02.920 2025] [ 1.069784] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:15:02.936 2025] [ 1.069798] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:15:02.939 2025] [ 1.069807] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:15:02.945 2025] [ 1.103157] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:15:02.955 2025] [ 1.103443] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:15:02.959 2025] [ 1.104252] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:15:02.967 2025] [ 1.104259] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:15:02.974 2025] [ 1.104271] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:15:02.985 2025] [ 1.104294] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:15:02.996 2025] [ 1.104308] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.003 2025] [ 1.104312] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:15:03.013 2025] [ 1.105090] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:15:03.017 2025] [ 1.105148] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:15:03.030 2025] [ 1.105403] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:15:03.036 2025] [ 1.105416] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:15:03.043 2025] [ 1.105421] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:15:03.050 2025] [ 1.106204] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:15:03.057 2025] [ 1.122651] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:15:03.065 2025] [ 1.127660] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:15:03.072 2025] [ 1.127660] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:15:03.080 2025] [ 1.127676] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:03.087 2025] [ 1.127695] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:03.095 2025] [ 1.127718] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:03.105 2025] [ 1.127729] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.112 2025] [ 1.127734] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:15:03.119 2025] [ 1.127740] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:03.125 2025] [ 1.127744] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:03.132 2025] [ 1.127752] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:03.140 2025] [ 1.127768] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:03.151 2025] [ 1.127776] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.157 2025] [ 1.127780] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:03.163 2025] [ 1.128070] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:03.170 2025] [ 1.128077] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:03.176 2025] [ 1.128116] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:15:03.185 2025] [ 1.128180] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:15:03.193 2025] [ 1.128197] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.200 2025] [ 1.128217] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:03.208 2025] [ 1.128314] mmc1: CQHCI version 5.10 [Fri Jan 03 14:15:03.219 2025] [ 1.128622] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:03.222 2025] [ 1.128638] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:03.222 2025] [ 1.128650] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:15:03.233 2025] [ 1.128668] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:15:03.242 2025] [ 1.128685] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.253 2025] [ 1.128690] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:03.255 2025] [ 1.129056] mmc2: CQHCI version 5.10 [Fri Jan 03 14:15:03.262 2025] [ 1.129582] mmc0: CQHCI version 5.10 [Fri Jan 03 14:15:03.266 2025] [ 1.132031] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:15:03.273 2025] [ 1.134404] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:15:03.281 2025] [ 1.137375] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:15:03.288 2025] [ 1.137565] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:15:03.295 2025] [ 1.137658] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:15:03.302 2025] [ 1.140775] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:15:03.307 2025] [ 1.140978] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:15:03.315 2025] [ 1.141040] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:15:03.325 2025] [ 1.142639] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:15:03.332 2025] [ 1.142648] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:15:03.341 2025] [ 1.142669] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:15:03.347 2025] [ 1.142687] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:15:03.353 2025] [ 1.142701] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:15:03.363 2025] [ 1.142705] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:15:03.367 2025] [ 1.142713] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:15:03.381 2025] [ 1.142725] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:15:03.385 2025] [ 1.142734] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:15:03.392 2025] [ 1.142739] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:15:03.401 2025] [ 1.143211] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:15:03.407 2025] [ 1.143216] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:15:03.414 2025] [ 1.143229] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:15:03.420 2025] [ 1.143240] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:15:03.427 2025] [ 1.143244] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:15:03.435 2025] [ 1.143744] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:15:03.440 2025] [ 1.143757] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:15:03.447 2025] [ 1.143760] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:15:03.452 2025] [ 1.143862] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:15:03.462 2025] [ 1.143875] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:15:03.469 2025] [ 1.143878] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:15:03.473 2025] [ 1.143939] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:15:03.481 2025] [ 1.143950] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:03.488 2025] [ 1.143953] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:15:03.494 2025] [ 1.144637] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:15:03.500 2025] [ 1.147462] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:15:03.507 2025] [ 1.159651] ALSA device list: [Fri Jan 03 14:15:03.513 2025] [ 1.159662] No soundcards found. [Fri Jan 03 14:15:03.514 2025] [ 1.163447] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:03.521 2025] [ 1.168351] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:03.529 2025] [ 1.175994] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:03.536 2025] [ 1.191852] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:15:03.545 2025] [ 1.222191] mmc1: new MMC card at address 0001 [Fri Jan 03 14:15:03.550 2025] [ 1.223006] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:15:03.556 2025] [ 1.231158] mmcblk1: p1 [Fri Jan 03 14:15:03.556 2025] [ 1.231987] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:15:03.562 2025] [ 1.233722] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:15:03.568 2025] [ 1.235049] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:15:03.574 2025] [ 1.317958] mmc0: Command Queue Engine enabled [Fri Jan 03 14:15:03.580 2025] [ 1.317975] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:15:03.585 2025] [ 1.318692] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:15:03.590 2025] [ 1.322593] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:15:03.594 2025] [ 1.323683] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:15:03.599 2025] [ 1.325010] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:15:03.604 2025] [ 1.326297] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:15:03.609 2025] [ 1.348918] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:15:03.614 2025] [ 1.349298] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:03.620 2025] [ 1.349377] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:15:03.625 2025] [ 1.349530] devtmpfs: mounted [Fri Jan 03 14:15:03.630 2025] [ 1.350919] Freeing unused kernel memory: 1856K [Fri Jan 03 14:15:03.634 2025] [ 1.353234] Run /sbin/init as init process [Fri Jan 03 14:15:03.639 2025] [ 1.353237] with arguments: [Fri Jan 03 14:15:03.644 2025] [ 1.353239] /sbin/init [Fri Jan 03 14:15:03.648 2025] [ 1.353241] with environment: [Fri Jan 03 14:15:03.649 2025] [ 1.353242] HOME=/ [Fri Jan 03 14:15:03.653 2025] [ 1.353244] TERM=linux [Fri Jan 03 14:15:03.653 2025] [ 1.353246] syntec_extend= [Fri Jan 03 14:15:03.657 2025] [ 1.444707] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:15:03.665 2025] [ 1.483180] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:15:03.665 2025] [ 1.484369] Segment Routing with IPv6 [Fri Jan 03 14:15:03.670 2025] [ 1.484403] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:15:03.674 2025] [ 1.520397] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:15:03.704 2025] [ 1.520956] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:15:03.711 2025] [ 1.524263] systemd[1]: Hostname set to . [Fri Jan 03 14:15:03.719 2025] [ 1.627413] systemd-sysv-generator[180]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:15:03.738 2025] [ 1.941616] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:15:03.756 2025] [ 1.944368] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:15:03.773 2025] [ 2.007266] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:15:03.782 2025] [ 2.010551] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:15:03.787 2025] [ 2.012069] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:15:03.793 2025] [ 2.012600] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:15:03.799 2025] [ 2.012964] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:15:03.806 2025] [ 2.013191] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:15:03.814 2025] [ 2.013610] systemd[1]: Reached target Path Units. [Fri Jan 03 14:15:03.819 2025] [ 2.013710] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:15:03.825 2025] [ 2.013784] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:15:03.832 2025] [ 2.013868] systemd[1]: Reached target Swaps. [Fri Jan 03 14:15:03.836 2025] [ 2.018051] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:15:03.842 2025] [ 2.018253] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:15:03.848 2025] [ 2.024263] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:15:03.853 2025] [ 2.024717] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:15:03.859 2025] [ 2.025572] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:15:03.865 2025] [ 2.026166] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:15:03.870 2025] [ 2.026808] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:15:03.879 2025] [ 2.027663] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:15:03.884 2025] [ 2.029543] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:15:03.894 2025] [ 2.030064] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:15:03.897 2025] [ 2.030591] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:15:03.903 2025] [ 2.081957] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:15:03.908 2025] [ 2.085964] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:15:03.914 2025] [ 2.090415] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:15:03.920 2025] [ 2.091273] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:15:03.940 2025] [ 2.092518] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:15:03.952 2025] [ 2.096363] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:15:03.959 2025] [ 2.102214] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:15:03.970 2025] [ 2.109863] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:15:03.974 2025] [ 2.115175] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:15:03.980 2025] [ 2.119921] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:15:03.985 2025] [ 2.126368] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:15:03.991 2025] [ 2.126956] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:15:04.001 2025] [ 2.128381] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:15:04.014 2025] [ 2.128412] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:15:04.022 2025] [ 2.132260] systemd[1]: Starting Journal Service... [Fri Jan 03 14:15:04.031 2025] [ 2.132855] fuse: init (API version 7.37) [Fri Jan 03 14:15:04.036 2025] [ 2.140363] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:15:04.043 2025] [ 2.145511] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:15:04.049 2025] [ 2.150871] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:15:04.049 2025] [ 2.160397] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:15:04.060 2025] [ 2.166572] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:15:04.065 2025] [ 2.169435] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:15:04.065 2025] [ 2.173527] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:15:04.065 2025] [ 2.188569] systemd[1]: Started RPC Bind. [Fri Jan 03 14:15:04.080 2025] [ 2.189585] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:15:04.081 2025] [ 2.190492] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:15:04.081 2025] [ 2.191505] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:15:04.098 2025] [ 2.192451] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:15:04.100 2025] [ 2.193859] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:15:04.100 2025] [ 2.195517] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:15:04.114 2025] [ 2.196249] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:15:04.114 2025] [ 2.197955] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:15:04.130 2025] [ 2.198838] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:15:04.132 2025] [ 2.200991] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:15:04.132 2025] [ 2.201898] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:15:04.146 2025] [ 2.203699] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:15:04.149 2025] [ 2.205113] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:15:04.149 2025] [ 2.231348] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:15:04.164 2025] [ 2.236827] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:15:04.172 2025] [ 2.240687] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:15:04.176 2025] [ 2.242609] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:15:04.176 2025] [ 2.259199] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:15:04.176 2025] [ 2.263361] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:15:04.191 2025] [ 2.267935] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:15:04.200 2025] [ 2.269089] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:15:04.200 2025] [ 2.272590] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:15:04.215 2025] [ 2.272931] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:15:04.233 2025] [ 2.274442] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:15:04.239 2025] [ 2.313481] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:15:04.245 2025] [ 2.319478] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:15:04.248 2025] [ 2.331351] systemd[1]: Started Journal Service. [Fri Jan 03 14:15:04.248 2025] [ 2.365378] systemd-journald[191]: Received client request to flush runtime journal. [Fri Jan 03 14:15:04.516 2025] [ 2.803278] random: crng init done [Fri Jan 03 14:15:04.628 2025] [ 2.915709] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:15:04.633 2025] [ 2.915731] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:15:04.639 2025] [ 2.915748] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:15:04.655 2025] [ 2.915776] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:15:04.677 2025] [ 2.915801] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:15:04.701 2025] [ 2.920652] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:15:04.707 2025] [ 2.920669] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:15:04.730 2025] [ 2.920703] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:15:04.781 2025] [ 2.920724] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:15:04.814 2025] [ 2.920736] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:15:04.848 2025] [ 2.920740] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:15:04.864 2025] [ 2.920751] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:15:04.897 2025] [ 2.920762] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:15:04.901 2025] [ 2.920774] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:15:04.915 2025] [ 2.920777] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:15:04.915 2025] [ 2.920787] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:15:04.943 2025] [ 2.920798] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:15:04.951 2025] [ 2.935880] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:15:04.973 2025] [ 2.935898] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:15:04.988 2025] [ 2.935943] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:15:05.010 2025] [ 2.935946] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:15:05.040 2025] [ 2.935972] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:15:05.055 2025] [ 2.983687] mc: Linux media interface: v0.10 [Fri Jan 03 14:15:05.055 2025] [ 3.040687] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:15:05.071 2025] [ 3.042502] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:15:05.071 2025] [ 3.044301] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:45:20 UTC (1681065920) [Fri Jan 03 14:15:05.086 2025] [ 3.057061] systemd-journald[191]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:15:05.102 2025] [ 3.057096] systemd-journald[191]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:15:05.118 2025] [ 3.106125] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:15:05.134 2025] [ 3.109097] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:15:05.134 2025] [ 3.112055] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:15:05.149 2025] [ 3.119756] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:15:05.149 2025] [ 3.121918] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:15:05.165 2025] [ 3.121959] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:15:05.165 2025] [ 3.122006] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:15:05.181 2025] [ 3.122015] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:15:05.181 2025] [ 3.248300] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:15:05.201 2025] [ 3.249323] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:15:05.201 2025] [ 3.249357] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:15:05.212 2025] [ 3.249362] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:15:05.212 2025] [ 3.249392] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:15:05.228 2025] [ 3.249422] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:15:05.228 2025] [ 3.249440] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:05.251 2025] [ 3.249445] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:15:05.254 2025] [ 3.250114] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:15:05.260 2025] [ 3.254083] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:15:05.267 2025] [ 3.289877] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:15:05.294 2025] [ 3.289980] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:15:05.299 2025] [ 3.292649] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:15:05.330 2025] [ 3.313125] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:15:05.341 2025] [ 3.313192] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:15:05.352 2025] [ 3.314072] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:15:05.355 2025] [ 3.314121] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:15:05.363 2025] [ 3.314129] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:15:05.374 2025] [ 3.317556] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:15:05.384 2025] [ 3.317818] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:15:05.388 2025] [ 3.365620] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:15:05.395 2025] [ 3.368067] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:15:05.406 2025] [ 3.368118] Get kick_gpio number= (418) [Fri Jan 03 14:15:05.702 2025] [ 3.990543] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:15:05.714 2025] [ 3.990564] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:15:05.737 2025] [ 3.990583] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:15:05.762 2025] [ 3.990616] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:15:05.781 2025] [ 3.990633] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:15:05.791 2025] [ 3.990638] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:15:05.795 2025] [ 3.990868] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:15:05.828 2025] [ 4.117061] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:15:05.835 2025] [ 4.121382] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:15:06.073 2025] [ 4.361191] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:15:06.082 2025] [ 4.369946] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:15:06.096 2025] [ 4.370001] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:15:06.102 2025] [ 4.375459] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:15:06.114 2025] [ 4.375493] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:15:06.134 2025] [ 4.389244] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:15:06.156 2025] [ 4.395714] hub 1-0:1.0: USB hub found [Fri Jan 03 14:15:06.163 2025] [ 4.396486] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:15:06.357 2025] [ 4.645272] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:15:06.551 2025] [ 4.838451] hub 1-1:1.0: USB hub found [Fri Jan 03 14:15:06.555 2025] [ 4.840793] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:15:06.577 2025] [ 4.864481] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:15:06.599 2025] [ 4.887294] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:15:06.607 2025] [ 4.889306] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:15:06.618 2025] [ 4.889340] cfg80211: failed to load regulatory.db [Fri Jan 03 14:15:06.690 2025] [ 4.978204] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:15:06.700 2025] [ 4.978241] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:15:06.996 2025] [ 5.284921] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:15:07.005 2025] [ 5.284953] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:07.186 2025] [ 5.473578] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:15:07.192 2025] [ 5.473617] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:07.203 2025] [ 5.476357] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:15:07.211 2025] [ 5.476394] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:07.219 2025] [ 5.503073] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:15:07.346 2025] [ 5.569712] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:15:07.347 2025] [ 5.572082] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:07.505 2025] [ 5.793028] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:15:07.542 2025] [ 5.830397] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:15:07.556 2025] [ 5.830428] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:15:07.568 2025] [ 5.846270] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:15:07.576 2025] [ 5.847438] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:08.061 2025] *************************************************************** [Fri Jan 03 14:15:08.071 2025] *************************************************************** [Fri Jan 03 14:15:08.072 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:15:08.078 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:15:08.084 2025] bash [Fri Jan 03 14:15:08.084 2025] cifs-utils [Fri Jan 03 14:15:08.084 2025] dosfstools [Fri Jan 03 14:15:08.084 2025] grub-common [Fri Jan 03 14:15:08.084 2025] grub-editenv [Fri Jan 03 14:15:08.088 2025] grub-efi [Fri Jan 03 14:15:08.088 2025] less [Fri Jan 03 14:15:08.093 2025] lib32-libgcc1 [Fri Jan 03 14:15:08.093 2025] lib32-libstdc++6 [Fri Jan 03 14:15:08.093 2025] libdw1 [Fri Jan 03 14:15:08.093 2025] libelf1 [Fri Jan 03 14:15:08.097 2025] libgcc1 [Fri Jan 03 14:15:08.097 2025] libgdbm-compat4 [Fri Jan 03 14:15:08.098 2025] libgdbm6 [Fri Jan 03 14:15:08.103 2025] libgmp10 [Fri Jan 03 14:15:08.103 2025] libidn2-0 [Fri Jan 03 14:15:08.103 2025] libreadline8 [Fri Jan 03 14:15:08.103 2025] libstdc++6 [Fri Jan 03 14:15:08.103 2025] libunistring2 [Fri Jan 03 14:15:08.109 2025] libvte-2.91-0 [Fri Jan 03 14:15:08.109 2025] nettle [Fri Jan 03 14:15:08.109 2025] onboard [Fri Jan 03 14:15:08.109 2025] parted [Fri Jan 03 14:15:08.109 2025] rxvt-unicode [Fri Jan 03 14:15:08.116 2025] [Fri Jan 03 14:15:08.116 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:15:08.120 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:15:08.121 2025] the opkg remove command. i.e.: [Fri Jan 03 14:15:08.125 2025] opkg remove [Fri Jan 03 14:15:08.126 2025] Where is the name printed in the list above [Fri Jan 03 14:15:08.131 2025] [Fri Jan 03 14:15:08.131 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:15:08.135 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:15:08.142 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:15:08.147 2025] also remove the dependent packages as well [Fri Jan 03 14:15:08.151 2025] *************************************************************** [Fri Jan 03 14:15:08.157 2025] *************************************************************** [Fri Jan 03 14:15:13.163 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:15:13.173 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:15:13.358 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:15:13.364 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:15:13.471 2025] [Fri Jan 03 14:15:13.471 2025] _____ _____ _ _ [Fri Jan 03 14:15:13.477 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:15:13.482 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:15:13.487 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:15:13.493 2025] |___| |___| [Fri Jan 03 14:15:13.498 2025] [Fri Jan 03 14:15:13.498 2025] Arago Project am62xx-evm - [Fri Jan 03 14:15:13.502 2025] [Fri Jan 03 14:15:13.502 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:15:13.508 2025] [Fri Jan 03 14:15:13.508 2025] am62xx-evm login: [ 11.831065] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:15:13.550 2025] [ 11.831093] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:15:13.555 2025] [ 11.831110] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.561 2025] [ 11.831996] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:15:13.567 2025] [ 11.832022] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:15:13.573 2025] [ 11.832038] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.579 2025] [ 11.832102] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:13.585 2025] [ 11.832107] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:15:13.591 2025] [ 11.832115] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.601 2025] [ 11.832708] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:15:13.604 2025] [ 11.832721] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:15:13.610 2025] [ 11.832740] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.616 2025] [ 11.832813] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:15:13.621 2025] [ 11.832819] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:15:13.627 2025] [ 11.832827] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.633 2025] [ 11.832863] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:15:13.644 2025] [ 11.832868] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:15:13.646 2025] [ 11.832875] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.652 2025] [ 11.832912] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:15:13.658 2025] [ 11.832917] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:15:13.664 2025] [ 11.832924] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:13.670 2025] [ 11.832964] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:15:13.680 2025] [ 11.832970] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:15:13.683 2025] [ 11.832978] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.195 2025] Could not set X locale modifiers [Fri Jan 03 14:15:15.868 2025] [ 14.155780] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:15:15.874 2025] [ 14.155802] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:15:15.880 2025] [ 14.155823] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.886 2025] [ 14.155871] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:15:15.892 2025] [ 14.155876] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:15:15.898 2025] [ 14.155885] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.904 2025] [ 14.155920] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:15.910 2025] [ 14.155924] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:15:15.916 2025] [ 14.155931] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.922 2025] [ 14.155969] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:15:15.928 2025] [ 14.155974] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:15:15.934 2025] [ 14.155980] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.940 2025] [ 14.156013] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:15:15.946 2025] [ 14.156018] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:15:15.956 2025] [ 14.156025] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.959 2025] [ 14.156060] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:15:15.965 2025] [ 14.156065] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:15:15.971 2025] [ 14.156072] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.977 2025] [ 14.156105] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:15:15.983 2025] [ 14.156112] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:15:15.989 2025] [ 14.156119] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:15.995 2025] [ 14.156225] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:15:16.005 2025] [ 14.156232] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:15:16.011 2025] [ 14.156240] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:16.360 2025] [ 14.647927] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:15:19.623 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:15:19.630 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:15:21.449 2025] [ 19.736029] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:15:21.456 2025] [ 19.736056] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:15:21.461 2025] [ 19.736078] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.466 2025] [ 19.739237] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:15:21.472 2025] [ 19.739257] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:15:21.478 2025] [ 19.739281] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.484 2025] [ 19.739416] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:21.490 2025] [ 19.739422] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:15:21.496 2025] [ 19.739431] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.502 2025] [ 19.739474] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:15:21.512 2025] [ 19.739480] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:15:21.515 2025] [ 19.739490] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.521 2025] [ 19.739530] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:15:21.527 2025] [ 19.739536] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:15:21.533 2025] [ 19.739543] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.539 2025] [ 19.739578] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:15:21.545 2025] [ 19.739583] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:15:21.551 2025] [ 19.739596] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.558 2025] [ 19.739629] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:15:21.564 2025] [ 19.739634] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:15:21.570 2025] [ 19.739642] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.576 2025] [ 19.739679] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:15:21.582 2025] [ 19.739684] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:15:21.585 2025] [ 19.739691] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.585 2025] [ 19.801257] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:15:21.601 2025] [ 19.801282] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:15:21.601 2025] [ 19.801303] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.601 2025] [ 19.801364] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:15:21.616 2025] [ 19.801370] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:15:21.616 2025] [ 19.801377] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.616 2025] [ 19.801412] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:21.632 2025] [ 19.801417] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:15:21.642 2025] [ 19.801424] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.648 2025] [ 19.801460] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:15:21.648 2025] [ 19.801465] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:15:21.648 2025] [ 19.801471] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.664 2025] [ 19.801506] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:15:21.664 2025] [ 19.801511] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:15:21.679 2025] [ 19.801518] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.679 2025] [ 19.801552] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:15:21.679 2025] [ 19.801557] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:15:21.695 2025] [ 19.801564] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.695 2025] [ 19.801598] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:15:21.711 2025] [ 19.801603] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:15:21.711 2025] [ 19.801610] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:21.711 2025] [ 19.801647] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:15:21.726 2025] [ 19.801652] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:15:21.726 2025] [ 19.801659] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:15:54.165 2025] [Fri Jan 03 14:15:54.166 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:15:54.186 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:15:54.237 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:15:54.258 2025] Trying to boot from MMC1 [Fri Jan 03 14:15:54.425 2025] Authentication passed [Fri Jan 03 14:15:54.431 2025] Authentication passed [Fri Jan 03 14:15:54.437 2025] Authentication passed [Fri Jan 03 14:15:54.472 2025] Authentication passed [Fri Jan 03 14:15:54.481 2025] Authentication passed [Fri Jan 03 14:15:54.485 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:15:54.486 2025] [Fri Jan 03 14:15:54.490 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:15:54.498 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:15:54.792 2025] [Fri Jan 03 14:15:54.793 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:15:54.798 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:15:54.842 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:15:54.848 2025] Error: could not access storage. [Fri Jan 03 14:15:54.849 2025] Trying to boot from MMC1 [Fri Jan 03 14:15:55.006 2025] Authentication passed [Fri Jan 03 14:15:55.013 2025] Authentication passed [Fri Jan 03 14:15:55.664 2025] [Fri Jan 03 14:15:55.664 2025] [Fri Jan 03 14:15:55.664 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:15:55.664 2025] [Fri Jan 03 14:15:55.664 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:15:55.664 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:15:55.680 2025] DRAM: 2 GiB [Fri Jan 03 14:15:55.916 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:15:55.916 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:15:55.932 2025] Loading Environment from MMC... OK [Fri Jan 03 14:15:56.136 2025] In: serial [Fri Jan 03 14:15:56.136 2025] Out: serial [Fri Jan 03 14:15:56.136 2025] Err: serial [Fri Jan 03 14:15:56.136 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:15:56.136 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:15:56.293 2025] switch to partitions #0, OK [Fri Jan 03 14:15:56.309 2025] mmc0(part 0) is current device [Fri Jan 03 14:15:56.451 2025] SD/MMC found on device 0 [Fri Jan 03 14:15:56.451 2025] Running eMMC boot ... [Fri Jan 03 14:15:56.467 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:15:56.467 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:15:56.482 2025] Importing environment from mmc0 ... [Fri Jan 03 14:15:56.703 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:15:56.718 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:15:56.718 2025] Working FDT set to 88000000 [Fri Jan 03 14:15:56.734 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:15:56.734 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:15:56.734 2025] Working FDT set to 88000000 [Fri Jan 03 14:15:56.765 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:15:56.765 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:15:56.781 2025] Working FDT set to 8feed000 [Fri Jan 03 14:15:56.781 2025] [Fri Jan 03 14:15:56.781 2025] Starting kernel ... [Fri Jan 03 14:15:56.796 2025] [Fri Jan 03 14:15:56.828 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:15:56.828 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:15:56.843 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:15:56.859 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:15:56.938 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:15:56.953 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:15:56.953 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:15:56.969 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:15:56.969 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:15:56.969 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:15:56.985 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:15:57.000 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:15:57.000 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:15:57.016 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:15:57.016 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:15:57.032 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:15:57.032 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:15:57.047 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:15:57.064 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:15:57.064 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:15:57.064 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:15:57.064 2025] [ 0.000000] Normal empty [Fri Jan 03 14:15:57.079 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:15:57.079 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:15:57.079 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:15:57.095 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:15:57.095 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:15:57.095 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:15:57.110 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:15:57.110 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:15:57.110 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:15:57.126 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:15:57.126 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:15:57.141 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:15:57.141 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:15:57.141 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:15:57.157 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:15:57.164 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:15:57.164 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:15:57.173 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:15:57.173 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:15:57.173 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:15:57.189 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:15:57.189 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:15:57.189 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:15:57.204 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:15:57.204 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:15:57.251 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:15:57.267 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:15:57.267 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:15:57.283 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:15:57.283 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:15:57.299 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:15:57.314 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:15:57.314 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:15:57.314 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:15:57.330 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:15:57.330 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:15:57.345 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:15:57.345 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:15:57.361 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:15:57.365 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:15:57.365 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:15:57.377 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:15:57.377 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:15:57.377 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:15:57.377 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:15:57.393 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:15:57.393 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:15:57.408 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:15:57.408 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:15:57.408 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:15:57.424 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:15:57.424 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:15:57.440 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:15:57.440 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:15:57.455 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:15:57.465 2025] [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:15:57.471 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 14:15:57.471 2025] [ 0.528877] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:15:57.487 2025] [ 0.528889] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:15:57.487 2025] [ 0.528969] LSM: Security Framework initializing [Fri Jan 03 14:15:57.502 2025] [ 0.529107] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:15:57.502 2025] [ 0.529131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:15:57.502 2025] [ 0.530834] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:15:57.518 2025] [ 0.530841] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:15:57.518 2025] [ 0.530886] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:15:57.534 2025] [ 0.583342] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:15:57.534 2025] [ 0.583584] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:15:57.549 2025] [ 0.583671] EFI services will not be available. [Fri Jan 03 14:15:57.549 2025] [ 0.583927] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:15:57.549 2025] [ 0.584695] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:15:57.565 2025] [ 0.584808] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:15:57.565 2025] [ 0.584824] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:15:57.565 2025] [ 0.584883] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:15:57.580 2025] [ 0.634955] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:15:57.580 2025] [ 0.635036] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:15:57.599 2025] [ 0.635050] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:15:57.604 2025] [ 0.635082] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:15:57.615 2025] [ 0.660954] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:15:57.616 2025] [ 0.661034] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:15:57.623 2025] [ 0.661046] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:15:57.630 2025] [ 0.661077] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:15:57.637 2025] [ 0.661133] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:15:57.642 2025] [ 0.661139] SMP: Total of 4 processors activated. [Fri Jan 03 14:15:57.648 2025] [ 0.661142] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:15:57.653 2025] [ 0.700586] CPU features: detected: CRC32 instructions [Fri Jan 03 14:15:57.658 2025] [ 0.700633] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:15:57.665 2025] [ 0.700635] alternatives: applying system-wide alternatives [Fri Jan 03 14:15:57.671 2025] [ 0.702130] devtmpfs: initialized [Fri Jan 03 14:15:57.671 2025] [ 0.713745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:15:57.679 2025] [ 0.713772] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:15:57.686 2025] [ 0.718918] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:15:57.693 2025] [ 0.719749] DMI not present or invalid. [Fri Jan 03 14:15:57.698 2025] [ 0.720277] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:15:57.704 2025] [ 0.734271] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:15:57.711 2025] [ 0.734562] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:15:57.717 2025] [ 0.734754] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:15:57.725 2025] [ 0.734895] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:15:57.734 2025] [ 0.735086] audit: type=2000 audit(0.732:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:15:57.738 2025] [ 0.735711] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:15:57.750 2025] [ 0.735715] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:15:57.752 2025] [ 0.735961] ASID allocator initialised with 65536 entries [Fri Jan 03 14:15:57.758 2025] [ 0.750897] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:15:57.765 2025] [ 0.760053] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:57.772 2025] [ 0.760064] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:15:57.779 2025] [ 0.760068] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:57.784 2025] [ 0.760071] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:15:57.795 2025] [ 0.760075] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:57.802 2025] [ 0.760077] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:15:57.805 2025] [ 0.760081] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:15:57.812 2025] [ 0.760084] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:15:57.818 2025] [ 0.761238] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:15:57.826 2025] [ 0.761746] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:15:57.833 2025] [ 0.761753] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:15:57.840 2025] [ 0.761765] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:15:57.850 2025] [ 0.761781] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:15:57.858 2025] [ 0.761792] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:15:57.866 2025] [ 0.761798] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:15:57.873 2025] [ 0.762026] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:15:57.880 2025] [ 0.762031] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:15:57.887 2025] [ 0.762040] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:15:57.899 2025] [ 0.762053] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:15:57.904 2025] [ 0.762061] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:15:57.911 2025] [ 0.762065] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:15:57.918 2025] [ 0.762323] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:15:57.925 2025] [ 0.762328] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:15:57.936 2025] [ 0.762352] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:15:57.941 2025] [ 0.762365] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:15:57.950 2025] [ 0.762374] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:15:57.957 2025] [ 0.762377] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:15:57.964 2025] [ 0.762581] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:15:57.971 2025] [ 0.762586] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:15:57.980 2025] [ [1.027781] printk: console [ttyS2] printing thread started [Fri Jan 03 14:15:57.985 2025] 0.762595] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:15:57.993 2025] [ 1.027802] printk: console [ttyS2] enabled [Fri Jan 03 14:15:57.998 2025] [ 1.027806] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:15:58.003 2025] [ 1.041972] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:15:58.008 2025] [ 1.043207] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:15:58.015 2025] [ 1.043218] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:15:58.025 2025] [ 1.043231] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:15:58.031 2025] [ 1.043248] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:15:58.041 2025] [ 1.043261] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.048 2025] [ 1.043266] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:15:58.055 2025] [ 1.043296] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:15:58.064 2025] [ 1.044240] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:15:58.070 2025] [ 1.044250] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:15:58.076 2025] [ 1.044262] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:15:58.085 2025] [ 1.044277] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:15:58.093 2025] [ 1.044286] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.100 2025] [ 1.044291] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:15:58.111 2025] [ 1.047274] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:15:58.114 2025] [ 1.053697] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:15:58.122 2025] [ 1.060217] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:15:58.129 2025] [ 1.060647] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:15:58.134 2025] [ 1.060653] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:15:58.141 2025] [ 1.060671] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:15:58.152 2025] [ 1.060688] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:15:58.163 2025] [ 1.060702] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.169 2025] [ 1.060708] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:15:58.175 2025] [ 1.094157] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:15:58.184 2025] [ 1.094445] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:15:58.190 2025] [ 1.095258] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:15:58.197 2025] [ 1.095266] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:15:58.202 2025] [ 1.095279] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:15:58.215 2025] [ 1.095303] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:15:58.227 2025] [ 1.095318] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.234 2025] [ 1.095322] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:15:58.241 2025] [ 1.096085] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:15:58.248 2025] [ 1.096146] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:15:58.261 2025] [ 1.096411] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:15:58.267 2025] [ 1.096422] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:15:58.274 2025] [ 1.096427] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:15:58.280 2025] [ 1.097212] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:15:58.288 2025] [ 1.113660] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:15:58.295 2025] [ 1.118529] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:58.301 2025] [ 1.118529] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:15:58.314 2025] [ 1.118544] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:58.317 2025] [ 1.118563] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:15:58.326 2025] [ 1.118586] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:15:58.335 2025] [ 1.118598] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.342 2025] [ 1.118603] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:58.349 2025] [ 1.119040] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:15:58.355 2025] [ 1.119050] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:58.361 2025] [ 1.119066] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:58.371 2025] [ 1.119089] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:58.379 2025] [ 1.119105] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.386 2025] [ 1.119110] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:15:58.392 2025] [ 1.119117] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:58.399 2025] [ 1.119121] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:58.410 2025] [ 1.119130] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:58.414 2025] [ 1.119161] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:15:58.424 2025] [ 1.119171] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.430 2025] [ 1.119176] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:58.436 2025] [ 1.119618] mmc1: CQHCI version 5.10 [Fri Jan 03 14:15:58.443 2025] [ 1.120127] mmc0: CQHCI version 5.10 [Fri Jan 03 14:15:58.447 2025] [ 1.121484] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:15:58.453 2025] [ 1.121497] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:15:58.459 2025] [ 1.121511] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:15:58.467 2025] [ 1.121534] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:15:58.476 2025] [ 1.121545] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.483 2025] [ 1.121554] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:15:58.489 2025] [ 1.122001] mmc2: CQHCI version 5.10 [Fri Jan 03 14:15:58.494 2025] [ 1.122880] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:15:58.501 2025] [ 1.125424] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:15:58.510 2025] [ 1.128438] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:15:58.516 2025] [ 1.128622] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:15:58.522 2025] [ 1.128690] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:15:58.529 2025] [ 1.131773] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:15:58.538 2025] [ 1.131980] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:15:58.540 2025] [ 1.132049] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:15:58.551 2025] [ 1.133669] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:15:58.553 2025] [ 1.133677] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:15:58.561 2025] [ 1.133703] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:15:58.574 2025] [ 1.133720] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:15:58.577 2025] [ 1.133732] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:15:58.584 2025] [ 1.133736] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:15:58.590 2025] [ 1.133746] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:15:58.599 2025] [ 1.133757] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:15:58.608 2025] [ 1.133768] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:15:58.615 2025] [ 1.133774] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:15:58.622 2025] [ 1.134224] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:15:58.628 2025] [ 1.134229] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:15:58.635 2025] [ 1.134242] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:15:58.643 2025] [ 1.134254] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:15:58.649 2025] [ 1.134258] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:15:58.659 2025] [ 1.134770] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:15:58.664 2025] [ 1.134786] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:15:58.671 2025] [ 1.134790] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:15:58.676 2025] [ 1.134890] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:15:58.685 2025] [ 1.134901] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:15:58.690 2025] [ 1.134904] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:15:58.697 2025] [ 1.134961] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:15:58.704 2025] [ 1.134972] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:15:58.710 2025] [ 1.134975] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:15:58.715 2025] [ 1.135642] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:15:58.722 2025] [ 1.138507] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:15:58.730 2025] [ 1.150861] ALSA device list: [Fri Jan 03 14:15:58.734 2025] [ 1.150878] No soundcards found. [Fri Jan 03 14:15:58.739 2025] [ 1.157056] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:58.745 2025] [ 1.162280] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:58.751 2025] [ 1.167844] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:15:58.762 2025] [ 1.168029] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:15:58.767 2025] [ 1.213907] mmc1: new MMC card at address 0001 [Fri Jan 03 14:15:58.772 2025] [ 1.214712] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:15:58.778 2025] [ 1.223507] mmcblk1: p1 [Fri Jan 03 14:15:58.782 2025] [ 1.224317] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:15:58.787 2025] [ 1.225994] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:15:58.792 2025] [ 1.227310] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:15:58.797 2025] [ 1.276361] mmc0: Command Queue Engine enabled [Fri Jan 03 14:15:58.801 2025] [ 1.276377] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:15:58.807 2025] [ 1.277161] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:15:58.812 2025] [ 1.281205] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:15:58.816 2025] [ 1.282338] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:15:58.821 2025] [ 1.283638] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:15:58.829 2025] [ 1.284741] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:15:58.831 2025] [ 1.304931] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:15:58.836 2025] [ 1.305312] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:15:58.842 2025] [ 1.305392] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:15:58.848 2025] [ 1.305619] devtmpfs: mounted [Fri Jan 03 14:15:58.853 2025] [ 1.307033] Freeing unused kernel memory: 1856K [Fri Jan 03 14:15:58.858 2025] [ 1.307177] Run /sbin/init as init process [Fri Jan 03 14:15:58.863 2025] [ 1.307180] with arguments: [Fri Jan 03 14:15:58.864 2025] [ 1.307181] /sbin/init [Fri Jan 03 14:15:58.869 2025] [ 1.307183] with environment: [Fri Jan 03 14:15:58.869 2025] [ 1.307185] HOME=/ [Fri Jan 03 14:15:58.874 2025] [ 1.307187] TERM=linux [Fri Jan 03 14:15:58.874 2025] [ 1.307188] syntec_extend= [Fri Jan 03 14:15:58.880 2025] [ 1.397815] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:15:58.886 2025] [ 1.440765] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:15:58.892 2025] [ 1.441956] Segment Routing with IPv6 [Fri Jan 03 14:15:58.892 2025] [ 1.441997] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:15:58.899 2025] [ 1.486570] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:15:58.927 2025] [ 1.487111] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:15:58.933 2025] [ 1.490529] systemd[1]: Hostname set to . [Fri Jan 03 14:15:58.938 2025] [ 1.616082] systemd-sysv-generator[182]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:15:58.961 2025] [ 1.909624] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:15:58.980 2025] [ 1.912361] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:15:58.997 2025] [ 1.975562] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:15:59.005 2025] [ 1.978883] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:15:59.012 2025] [ 1.980399] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:15:59.017 2025] [ 1.980915] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:15:59.023 2025] [ 1.981330] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:15:59.030 2025] [ 1.981550] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:15:59.038 2025] [ 1.981917] systemd[1]: Reached target Path Units. [Fri Jan 03 14:15:59.043 2025] [ 1.982027] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:15:59.049 2025] [ 1.982093] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:15:59.054 2025] [ 1.982205] systemd[1]: Reached target Swaps. [Fri Jan 03 14:15:59.059 2025] [ 1.986435] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:15:59.065 2025] [ 1.986612] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:15:59.071 2025] [ 1.992765] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:15:59.076 2025] [ 1.993217] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:15:59.083 2025] [ 1.994037] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:15:59.088 2025] [ 1.994664] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:15:59.094 2025] [ 1.995266] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:15:59.099 2025] [ 1.996050] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:15:59.105 2025] [ 1.997880] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:15:59.111 2025] [ 1.998393] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:15:59.117 2025] [ 1.998894] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:15:59.123 2025] [ 2.060893] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:15:59.129 2025] [ 2.065008] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:15:59.138 2025] [ 2.069248] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:15:59.148 2025] [ 2.070048] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:15:59.162 2025] [ 2.071361] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:15:59.172 2025] [ 2.075233] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:15:59.179 2025] [ 2.082394] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:15:59.184 2025] [ 2.087990] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:15:59.190 2025] [ 2.093541] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:15:59.197 2025] [ 2.098607] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:15:59.207 2025] [ 2.104921] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:15:59.208 2025] [ 2.105464] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:15:59.219 2025] [ 2.106755] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:15:59.232 2025] [ 2.106780] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:15:59.241 2025] [ 2.110844] systemd[1]: Starting Journal Service... [Fri Jan 03 14:15:59.248 2025] [ 2.118680] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:15:59.256 2025] [ 2.124101] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:15:59.262 2025] [ 2.129379] fuse: init (API version 7.37) [Fri Jan 03 14:15:59.266 2025] [ 2.129542] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:15:59.271 2025] [ 2.136318] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:15:59.281 2025] [ 2.150968] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:15:59.282 2025] [ 2.166454] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:15:59.288 2025] [ 2.173935] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:15:59.293 2025] [ 2.183903] systemd[1]: Started RPC Bind. [Fri Jan 03 14:15:59.298 2025] [ 2.184968] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:15:59.304 2025] [ 2.185982] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:15:59.309 2025] [ 2.186829] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:15:59.314 2025] [ 2.187640] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:15:59.319 2025] [ 2.189449] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:15:59.326 2025] [ 2.191290] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:15:59.332 2025] [ 2.192127] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:15:59.338 2025] [ 2.194033] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:15:59.345 2025] [ 2.194828] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:15:59.350 2025] [ 2.196607] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:15:59.356 2025] [ 2.197431] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:15:59.362 2025] [ 2.198926] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:15:59.367 2025] [ 2.200517] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:15:59.374 2025] [ 2.213065] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:15:59.380 2025] [ 2.218803] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:15:59.386 2025] [ 2.241498] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:15:59.391 2025] [ 2.245076] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:15:59.398 2025] [ 2.250127] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:15:59.403 2025] [ 2.266433] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:15:59.410 2025] [ 2.267504] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:15:59.415 2025] [ 2.270867] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:15:59.426 2025] [ 2.271305] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:15:59.443 2025] [ 2.271715] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:15:59.450 2025] [ 2.276110] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:15:59.458 2025] [ 2.280124] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:15:59.466 2025] [ 2.320325] systemd[1]: Started Journal Service. [Fri Jan 03 14:15:59.471 2025] [ 2.368065] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:15:59.662 2025] [ 2.710216] random: crng init done [Fri Jan 03 14:15:59.824 2025] [ 2.871265] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:15:59.829 2025] [ 2.871285] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:15:59.861 2025] [ 2.871300] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:15:59.892 2025] [ 2.871344] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:15:59.911 2025] [ 2.871365] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:15:59.921 2025] [ 2.884492] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:15:59.935 2025] [ 2.884509] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:15:59.950 2025] [ 2.884538] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:15:59.991 2025] [ 2.884568] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:16:00.008 2025] [ 2.884579] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:16:00.017 2025] [ 2.884583] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:16:00.024 2025] [ 2.884594] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:16:00.045 2025] [ 2.884605] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:16:00.052 2025] [ 2.884612] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:16:00.062 2025] [ 2.884616] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:16:00.066 2025] [ 2.884626] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:16:00.078 2025] [ 2.884637] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:16:00.101 2025] [ 2.900348] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:16:00.108 2025] [ 2.900367] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:16:00.114 2025] [ 2.900402] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:16:00.124 2025] [ 2.900405] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:16:00.134 2025] [ 2.900440] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:00.137 2025] [ 2.901312] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:16:00.142 2025] [ 2.905286] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:46:15 UTC (1681065975) [Fri Jan 03 14:16:00.150 2025] [ 2.906023] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:16:00.169 2025] [ 2.906047] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:16:00.186 2025] [ 2.922122] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:16:00.203 2025] [ 2.922183] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:16:00.222 2025] [ 2.925036] mc: Linux media interface: v0.10 [Fri Jan 03 14:16:00.228 2025] [ 2.942290] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:16:00.233 2025] [ 3.110701] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:16:00.264 2025] [ 3.112397] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:16:00.269 2025] [ 3.115863] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:16:00.276 2025] [ 3.124837] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:16:00.295 2025] [ 3.126595] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:16:00.317 2025] [ 3.126643] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:16:00.327 2025] [ 3.126679] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:16:00.339 2025] [ 3.126686] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:16:00.351 2025] [ 3.291902] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:16:00.366 2025] [ 3.292197] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:16:00.384 2025] [ 3.292376] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:16:00.393 2025] [ 3.292667] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:16:00.403 2025] [ 3.293082] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:16:00.405 2025] [ 3.293309] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:16:00.411 2025] [ 3.308048] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:16:00.416 2025] [ 3.308074] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:16:00.424 2025] [ 3.308079] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:16:00.431 2025] [ 3.308107] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:16:00.445 2025] [ 3.308183] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:16:00.461 2025] [ 3.308200] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:00.483 2025] [ 3.308207] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:16:00.507 2025] [ 3.308984] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:16:00.516 2025] [ 3.309029] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:16:00.543 2025] [ 3.309762] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:16:00.553 2025] [ 3.309793] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 14:16:00.565 2025] [ 3.309800] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:16:00.582 2025] [ 3.310416] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:16:00.591 2025] [ 3.310585] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:16:00.602 2025] [ 3.377790] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:16:00.603 2025] [ 3.378490] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:16:00.617 2025] [ 3.378521] Get kick_gpio number= (418) [Fri Jan 03 14:16:01.407 2025] [ 4.455254] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:16:01.419 2025] [ 4.455280] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:16:01.446 2025] [ 4.455296] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:16:01.465 2025] [ 4.455325] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:16:01.483 2025] [ 4.455346] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:16:01.498 2025] [ 4.455353] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:16:01.503 2025] [ 4.455543] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:16:01.514 2025] [ 4.506274] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:16:01.516 2025] [ 4.510918] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:16:01.529 2025] [ 4.577453] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:16:01.602 2025] [ 4.651021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:16:01.614 2025] [ 4.660621] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:16:01.631 2025] [ 4.660656] cfg80211: failed to load regulatory.db [Fri Jan 03 14:16:01.701 2025] [ 4.748468] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:16:01.738 2025] [ 4.779104] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:16:01.747 2025] [ 4.793235] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:16:01.759 2025] [ 4.793517] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:16:01.796 2025] [ 4.793534] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:16:01.816 2025] [ 4.798262] xhci-hcd xhci-hcd.4.auto: irq 466, io mem 0x31100000 [Fri Jan 03 14:16:01.840 2025] [ 4.799974] hub 1-0:1.0: USB hub found [Fri Jan 03 14:16:01.845 2025] [ 4.800203] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:16:01.851 2025] [ 4.811659] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:16:01.858 2025] [ 4.811696] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:16:01.989 2025] [ 5.037254] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:16:02.167 2025] [ 5.214971] hub 1-1:1.0: USB hub found [Fri Jan 03 14:16:02.173 2025] [ 5.222284] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:16:02.207 2025] [ 5.255672] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:16:02.212 2025] [ 5.255715] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:02.276 2025] [ 5.322581] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:16:02.278 2025] [ 5.322629] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:02.493 2025] [ 5.541664] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:16:02.501 2025] [ 5.541712] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:02.511 2025] [ 5.557831] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:16:02.587 2025] [ 5.635967] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:16:02.591 2025] [ 5.636651] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:02.620 2025] [ 5.668337] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:16:02.656 2025] [ 5.704828] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:16:02.672 2025] [ 5.704867] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:16:02.954 2025] [ 6.002537] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:16:02.959 2025] [ 6.003897] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:03.252 2025] *************************************************************** [Fri Jan 03 14:16:03.257 2025] *************************************************************** [Fri Jan 03 14:16:03.263 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:16:03.273 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:16:03.274 2025] bash [Fri Jan 03 14:16:03.274 2025] cifs-utils [Fri Jan 03 14:16:03.274 2025] dosfstools [Fri Jan 03 14:16:03.278 2025] grub-common [Fri Jan 03 14:16:03.283 2025] grub-editenv [Fri Jan 03 14:16:03.283 2025] grub-efi [Fri Jan 03 14:16:03.283 2025] less [Fri Jan 03 14:16:03.283 2025] lib32-libgcc1 [Fri Jan 03 14:16:03.287 2025] lib32-libstdc++6 [Fri Jan 03 14:16:03.287 2025] libdw1 [Fri Jan 03 14:16:03.287 2025] libelf1 [Fri Jan 03 14:16:03.288 2025] libgcc1 [Fri Jan 03 14:16:03.292 2025] libgdbm-compat4 [Fri Jan 03 14:16:03.292 2025] libgdbm6 [Fri Jan 03 14:16:03.292 2025] libgmp10 [Fri Jan 03 14:16:03.292 2025] libidn2-0 [Fri Jan 03 14:16:03.296 2025] libreadline8 [Fri Jan 03 14:16:03.296 2025] libstdc++6 [Fri Jan 03 14:16:03.296 2025] libunistring2 [Fri Jan 03 14:16:03.296 2025] libvte-2.91-0 [Fri Jan 03 14:16:03.300 2025] nettle [Fri Jan 03 14:16:03.301 2025] onboard [Fri Jan 03 14:16:03.301 2025] parted [Fri Jan 03 14:16:03.301 2025] rxvt-unicode [Fri Jan 03 14:16:03.305 2025] [Fri Jan 03 14:16:03.305 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:16:03.309 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:16:03.314 2025] the opkg remove command. i.e.: [Fri Jan 03 14:16:03.319 2025] opkg remove [Fri Jan 03 14:16:03.319 2025] Where is the name printed in the list above [Fri Jan 03 14:16:03.323 2025] [Fri Jan 03 14:16:03.323 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:16:03.329 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:16:03.334 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:16:03.339 2025] also remove the dependent packages as well [Fri Jan 03 14:16:03.346 2025] *************************************************************** [Fri Jan 03 14:16:03.351 2025] *************************************************************** [Fri Jan 03 14:16:08.315 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:16:08.321 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:16:08.508 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:16:08.516 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:16:08.694 2025] [ 11.741700] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:16:08.699 2025] [ 11.741727] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:16:08.705 2025] [ 11.741749] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.711 2025] [ 11.741805] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:16:08.717 2025] [ 11.741810] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:16:08.724 2025] [ 11.741819] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.729 2025] [ 11.741855] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:16:08.740 2025] [Fri Jan 03 14:16:08.740 2025] [ 11.741860] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:16:08.746 2025] [ 11.741867] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.751 2025] [ 11.741904] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:16:08.758 2025] _____ _____ _ _ [ 11.741910] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:16:08.765 2025] [ 11.741919] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.777 2025] [ 11.741957] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:16:08.779 2025] [Fri Jan 03 14:16:08.779 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [ 11.741962] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:16:08.789 2025] [Fri Jan 03 14:16:08.789 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:16:08.795 2025] |__|[ 11.741969] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.801 2025] __|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:16:08.806 2025] [ 11.742003] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:16:08.813 2025] |___| |___| [Fri Jan 03 14:16:08.818 2025] [Fri Jan 03 14:16:08.818 2025] Arago Project [ 11.742008] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:16:08.824 2025] am62xx-evm - [Fri Jan 03 14:16:08.828 2025] [Fri Jan 03 14:16:08.832 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:16:08.833 2025] [Fri Jan 03 14:16:08.833 2025] am62xx-evm login: [ 11.742019] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.838 2025] [ 11.742052] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:08.844 2025] [ 11.742058] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:16:08.850 2025] [ 11.742064] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:08.859 2025] [ 11.742102] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:16:08.865 2025] [ 11.742107] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:16:08.867 2025] [ 11.742115] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.001 2025] [ 14.048345] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:16:11.001 2025] [ 14.048366] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:16:11.001 2025] [ 14.048387] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.017 2025] [ 14.048433] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:16:11.017 2025] [ 14.048438] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:16:11.017 2025] [ 14.048446] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.033 2025] [ 14.048481] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:16:11.033 2025] [ 14.048486] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:16:11.048 2025] [ 14.048492] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.048 2025] [ 14.048530] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:16:11.048 2025] [ 14.048535] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:16:11.064 2025] [ 14.048542] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.064 2025] [ 14.048576] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:16:11.079 2025] [ 14.048582] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:16:11.079 2025] [ 14.048588] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.079 2025] [ 14.048623] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:16:11.095 2025] [ 14.048628] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:16:11.100 2025] [ 14.048634] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.100 2025] [ 14.048668] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:11.111 2025] [ 14.048675] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:16:11.111 2025] [ 14.048682] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.127 2025] [ 14.048716] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:16:11.127 2025] [ 14.048721] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:16:11.127 2025] [ 14.048728] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:11.473 2025] [ 14.532697] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:16:14.767 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:16:14.782 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:16:16.594 2025] [ 19.641914] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:16:16.600 2025] [ 19.641937] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:16:16.606 2025] [ 19.641955] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.612 2025] [ 19.642009] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:16:16.617 2025] [ 19.642014] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:16:16.623 2025] [ 19.642021] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.629 2025] [ 19.642057] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:16:16.635 2025] [ 19.642062] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:16:16.642 2025] [ 19.642071] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.648 2025] [ 19.642105] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:16:16.654 2025] [ 19.642110] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:16:16.660 2025] [ 19.642117] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.666 2025] [ 19.642825] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:16:16.672 2025] [ 19.642841] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:16:16.679 2025] [ 19.642858] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.685 2025] [ 19.642973] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:16:16.696 2025] [ 19.642979] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:16:16.698 2025] [ 19.642987] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.704 2025] [ 19.643053] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:16.710 2025] [ 19.643074] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:16:16.716 2025] [ 19.643082] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.722 2025] [ 19.643199] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:16:16.728 2025] [ 19.643206] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:16:16.738 2025] [ 19.643219] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.741 2025] [ 19.725217] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:16:16.747 2025] [ 19.725247] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:16:16.753 2025] [ 19.725267] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.759 2025] [ 19.725329] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:16:16.765 2025] [ 19.725335] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:16:16.771 2025] [ 19.725343] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.777 2025] [ 19.725382] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:16:16.783 2025] [ 19.725387] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:16:16.789 2025] [ 19.725394] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.795 2025] [ 19.725434] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:16:16.805 2025] [ 19.725439] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:16:16.808 2025] [ 19.725446] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.813 2025] [ 19.725480] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:16:16.819 2025] [ 19.725485] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:16:16.825 2025] [ 19.725499] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.831 2025] [ 19.725533] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:16:16.837 2025] [ 19.725538] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:16:16.847 2025] [ 19.725545] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.853 2025] [ 19.725579] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:16.856 2025] [ 19.725584] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:16:16.862 2025] [ 19.725592] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:16.868 2025] [ 19.725627] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:16:16.874 2025] [ 19.725632] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:16:16.880 2025] [ 19.725639] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:16:49.398 2025] [Fri Jan 03 14:16:49.398 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:16:49.418 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:16:49.467 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:16:49.488 2025] Trying to boot from MMC1 [Fri Jan 03 14:16:49.649 2025] Authentication passed [Fri Jan 03 14:16:49.664 2025] Authentication passed [Fri Jan 03 14:16:49.664 2025] Authentication passed [Fri Jan 03 14:16:49.695 2025] Authentication passed [Fri Jan 03 14:16:49.711 2025] Authentication passed [Fri Jan 03 14:16:49.711 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:16:49.711 2025] [Fri Jan 03 14:16:49.711 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:16:49.727 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:16:50.028 2025] [Fri Jan 03 14:16:50.028 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:16:50.028 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:16:50.074 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:16:50.074 2025] Error: could not access storage. [Fri Jan 03 14:16:50.074 2025] Trying to boot from MMC1 [Fri Jan 03 14:16:50.232 2025] Authentication passed [Fri Jan 03 14:16:50.247 2025] Authentication passed [Fri Jan 03 14:16:50.892 2025] [Fri Jan 03 14:16:50.892 2025] [Fri Jan 03 14:16:50.892 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:16:50.907 2025] [Fri Jan 03 14:16:50.907 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:16:50.907 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:16:50.907 2025] DRAM: 2 GiB [Fri Jan 03 14:16:51.143 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:16:51.159 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:16:51.159 2025] Loading Environment from MMC... OK [Fri Jan 03 14:16:51.364 2025] In: serial [Fri Jan 03 14:16:51.364 2025] Out: serial [Fri Jan 03 14:16:51.379 2025] Err: serial [Fri Jan 03 14:16:51.379 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:16:51.379 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:16:51.537 2025] switch to partitions #0, OK [Fri Jan 03 14:16:51.537 2025] mmc0(part 0) is current device [Fri Jan 03 14:16:51.679 2025] SD/MMC found on device 0 [Fri Jan 03 14:16:51.679 2025] Running eMMC boot ... [Fri Jan 03 14:16:51.694 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:16:51.710 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:16:51.710 2025] Importing environment from mmc0 ... [Fri Jan 03 14:16:51.937 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:16:51.961 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:16:51.961 2025] Working FDT set to 88000000 [Fri Jan 03 14:16:51.961 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:16:51.961 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:16:51.977 2025] Working FDT set to 88000000 [Fri Jan 03 14:16:51.993 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:16:51.993 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:16:52.008 2025] Working FDT set to 8feed000 [Fri Jan 03 14:16:52.024 2025] [Fri Jan 03 14:16:52.024 2025] Starting kernel ... [Fri Jan 03 14:16:52.024 2025] [Fri Jan 03 14:16:52.056 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:16:52.056 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:16:52.087 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:16:52.087 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:16:52.182 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:16:52.182 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:16:52.182 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:16:52.197 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:16:52.197 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:16:52.213 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:16:52.213 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:16:52.228 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:16:52.237 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:16:52.244 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:16:52.260 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:16:52.260 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:16:52.276 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:16:52.276 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:16:52.291 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:16:52.291 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:16:52.291 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:16:52.307 2025] [ 0.000000] Normal empty [Fri Jan 03 14:16:52.307 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:16:52.307 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:16:52.307 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:16:52.323 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:16:52.323 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:16:52.338 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:16:52.339 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:16:52.339 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:16:52.354 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:16:52.354 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:16:52.370 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:16:52.370 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:16:52.370 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:16:52.386 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:16:52.386 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:16:52.386 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:16:52.401 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:16:52.401 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:16:52.401 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:16:52.417 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:16:52.417 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:16:52.432 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:16:52.432 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:16:52.438 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:16:52.449 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:16:52.495 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:16:52.495 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:16:52.512 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:16:52.512 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:16:52.527 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:16:52.543 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:16:52.543 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:16:52.543 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:16:52.559 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:16:52.559 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:16:52.575 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:16:52.575 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:16:52.575 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:16:52.590 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:16:52.590 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:16:52.590 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:16:52.606 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:16:52.606 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:16:52.606 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:16:52.621 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:16:52.621 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:16:52.621 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:16:52.639 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:16:52.639 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:16:52.653 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:16:52.653 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:16:52.669 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:16:52.669 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:16:52.669 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:16:52.684 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:16:52.684 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:16:52.700 2025] [ 0.000249] Console: colour dummy device 80x25 [Fri Jan 03 14:16:52.700 2025] [ 0.528888] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:16:52.716 2025] [ 0.528897] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:16:52.716 2025] [ 0.528979] LSM: Security Framework initializing [Fri Jan 03 14:16:52.731 2025] [ 0.529115] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:16:52.739 2025] [ 0.529138] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:16:52.747 2025] [ 0.530831] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:16:52.747 2025] [ 0.530838] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:16:52.763 2025] [ 0.530882] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:16:52.763 2025] [ 0.583338] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:16:52.763 2025] [ 0.583567] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:16:52.779 2025] [ 0.583652] EFI services will not be available. [Fri Jan 03 14:16:52.779 2025] [ 0.583906] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:16:52.794 2025] [ 0.584681] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:16:52.794 2025] [ 0.584792] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:16:52.794 2025] [ 0.584809] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:16:52.810 2025] [ 0.584864] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:16:52.810 2025] [ 0.634945] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:16:52.825 2025] [ 0.635032] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:16:52.825 2025] [ 0.635045] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:16:52.825 2025] [ 0.635080] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:16:52.842 2025] [ 0.660963] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:16:52.842 2025] [ 0.661047] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:16:52.857 2025] [ 0.661059] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:16:52.857 2025] [ 0.661090] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:16:52.857 2025] [ 0.661147] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:16:52.873 2025] [ 0.661153] SMP: Total of 4 processors activated. [Fri Jan 03 14:16:52.873 2025] [ 0.695340] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:16:52.873 2025] [ 0.695344] CPU features: detected: CRC32 instructions [Fri Jan 03 14:16:52.888 2025] [ 0.695388] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:16:52.888 2025] [ 0.695390] alternatives: applying system-wide alternatives [Fri Jan 03 14:16:52.888 2025] [ 0.696882] devtmpfs: initialized [Fri Jan 03 14:16:52.904 2025] [ 0.708533] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:16:52.904 2025] [ 0.708560] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:16:52.920 2025] [ 0.713740] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:16:52.920 2025] [ 0.714552] DMI not present or invalid. [Fri Jan 03 14:16:52.920 2025] [ 0.715085] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:16:52.935 2025] [ 0.730440] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:16:52.940 2025] [ 0.730763] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:16:52.951 2025] [ 0.730969] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:16:52.951 2025] [ 0.731071] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:16:52.951 2025] [ 0.731206] audit: type=2000 audit(0.729:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:16:52.967 2025] [ 0.731797] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:16:52.967 2025] [ 0.731802] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:16:52.982 2025] [ 0.732035] ASID allocator initialised with 65536 entries [Fri Jan 03 14:16:52.982 2025] [ 0.747032] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:16:52.998 2025] [ 0.756130] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:16:52.998 2025] [ 0.756140] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:16:52.998 2025] [ 0.756145] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:16:53.014 2025] [ 0.756147] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:16:53.014 2025] [ 0.756151] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:16:53.029 2025] [ 0.756153] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:16:53.029 2025] [ 0.756157] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:16:53.045 2025] [ 0.756160] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:16:53.045 2025] [ 0.757451] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:16:53.061 2025] [ 0.757923] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.061 2025] [ 0.757929] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:16:53.061 2025] [ 0.757942] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:16:53.077 2025] [ 0.757957] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:16:53.077 2025] [ 0.757967] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.092 2025] [ 0.757973] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:16:53.092 2025] [ 0.758199] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.108 2025] [ 0.758204] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:16:53.108 2025] [ 0.758214] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:16:53.123 2025] [ 0.758226] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:16:53.123 2025] [ 0.758235] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.141 2025] [ 0.758238] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:16:53.141 2025] [ 0.758478] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.155 2025] [ 0.758482] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:16:53.155 2025] [ 0.758496] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:16:53.171 2025] [ 0.758508] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:16:53.171 2025] [ 0.758516] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.187 2025] [ 0.758520] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:16:53.187 2025] [ 0.758750] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.205 2025] [ 0.758755] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:16:53.208 2025] [ 1[.029059] printk: console [ttyS2] printing thread started [Fri Jan 03 14:16:53.208 2025] 0.758764] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:16:53.224 2025] [ 1.029079] printk: console [ttyS2] enabled [Fri Jan 03 14:16:53.224 2025] [ 1.029083] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:16:53.224 2025] [ 1.043266] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:16:53.241 2025] [ 1.044529] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:16:53.241 2025] [ 1.044541] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:16:53.256 2025] [ 1.044553] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:16:53.256 2025] [ 1.044571] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:16:53.271 2025] [ 1.044584] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.271 2025] [ 1.044588] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:16:53.287 2025] [ 1.044619] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:16:53.287 2025] [ 1.045544] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:16:53.303 2025] [ 1.045554] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:16:53.303 2025] [ 1.045565] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:16:53.318 2025] [ 1.045580] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:16:53.318 2025] [ 1.045589] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.334 2025] [ 1.045593] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:16:53.341 2025] [ 1.048361] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:16:53.341 2025] [ 1.054991] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:16:53.350 2025] [ 1.061625] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:16:53.350 2025] [ 1.062060] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:16:53.366 2025] [ 1.062065] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:16:53.366 2025] [ 1.062080] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:16:53.381 2025] [ 1.062099] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:16:53.381 2025] [ 1.062112] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.397 2025] [ 1.062118] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:16:53.397 2025] [ 1.095467] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:16:53.412 2025] [ 1.095752] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:16:53.412 2025] [ 1.096551] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:16:53.428 2025] [ 1.096560] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:16:53.428 2025] [ 1.096573] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:16:53.444 2025] [ 1.096595] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:16:53.460 2025] [ 1.096610] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.460 2025] [ 1.096616] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:16:53.460 2025] [ 1.097358] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:16:53.476 2025] [ 1.097403] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:16:53.491 2025] [ 1.097659] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:16:53.491 2025] [ 1.097671] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:16:53.507 2025] [ 1.097676] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:16:53.507 2025] [ 1.098433] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:16:53.522 2025] [ 1.114963] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:16:53.522 2025] [ 1.119718] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:16:53.522 2025] [ 1.119737] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:16:53.541 2025] [ 1.119751] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:16:53.541 2025] [ 1.119778] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:16:53.554 2025] [ 1.119790] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.554 2025] [ 1.119798] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:16:53.570 2025] [ 1.119843] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:16:53.588 2025] [ 1.120350] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:16:53.589 2025] [ 1.120360] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:16:53.595 2025] [ 1.120376] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:16:53.605 2025] [ 1.120395] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:16:53.614 2025] [ 1.120405] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.621 2025] [ 1.120410] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:16:53.627 2025] [ 1.120415] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:16:53.633 2025] [ 1.120418] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:16:53.639 2025] [ 1.120441] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:16:53.652 2025] [ 1.120468] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:16:53.658 2025] [ 1.120489] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.665 2025] [ 1.120493] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:16:53.672 2025] [ 1.121328] mmc1: CQHCI version 5.10 [Fri Jan 03 14:16:53.677 2025] [ 1.121332] mmc0: CQHCI version 5.10 [Fri Jan 03 14:16:53.686 2025] [ 1.122700] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:16:53.687 2025] [ 1.122717] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:16:53.692 2025] [ 1.122731] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:16:53.701 2025] [ 1.122753] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:16:53.711 2025] [ 1.122768] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.717 2025] [ 1.122774] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:16:53.723 2025] [ 1.123353] mmc2: CQHCI version 5.10 [Fri Jan 03 14:16:53.728 2025] [ 1.124517] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:16:53.736 2025] [ 1.126949] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:16:53.746 2025] [ 1.129895] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:16:53.751 2025] [ 1.130117] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:16:53.758 2025] [ 1.130200] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:16:53.770 2025] [ 1.133246] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:16:53.777 2025] [ 1.133587] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:16:53.788 2025] [ 1.133663] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:16:53.790 2025] [ 1.135231] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.797 2025] [ 1.135241] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:16:53.804 2025] [ 1.135263] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:16:53.813 2025] [ 1.135279] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:16:53.819 2025] [ 1.135291] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:16:53.827 2025] [ 1.135295] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:16:53.834 2025] [ 1.135305] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:16:53.842 2025] [ 1.135316] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:16:53.851 2025] [ 1.135325] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:16:53.858 2025] [ 1.135330] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:16:53.864 2025] [ 1.135760] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:16:53.876 2025] [ 1.135765] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:16:53.878 2025] [ 1.135778] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:16:53.886 2025] [ 1.135789] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:16:53.893 2025] [ 1.135794] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:16:53.899 2025] [ 1.136293] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:16:53.907 2025] [ 1.136306] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:16:53.914 2025] [ 1.136310] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:16:53.919 2025] [ 1.136409] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:16:53.927 2025] [ 1.136420] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:16:53.934 2025] [ 1.136424] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:16:53.939 2025] [ 1.136532] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:16:53.952 2025] [ 1.136543] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:16:53.958 2025] [ 1.136546] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:16:53.959 2025] [ 1.137195] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:16:53.967 2025] [ 1.140029] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:16:53.974 2025] [ 1.152239] ALSA device list: [Fri Jan 03 14:16:53.980 2025] [ 1.152251] No soundcards found. [Fri Jan 03 14:16:53.980 2025] [ 1.158700] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:16:53.987 2025] [ 1.164878] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:16:53.995 2025] [ 1.173470] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:16:54.002 2025] [ 1.184156] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:16:54.014 2025] [ 1.219536] mmc1: new MMC card at address 0001 [Fri Jan 03 14:16:54.015 2025] [ 1.220345] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:16:54.020 2025] [ 1.228360] mmcblk1: p1 [Fri Jan 03 14:16:54.026 2025] [ 1.229172] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:16:54.033 2025] [ 1.230868] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:16:54.039 2025] [ 1.232217] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:16:54.043 2025] [ 1.276662] mmc0: Command Queue Engine enabled [Fri Jan 03 14:16:54.047 2025] [ 1.276680] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:16:54.052 2025] [ 1.277553] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:16:54.058 2025] [ 1.281687] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:16:54.062 2025] [ 1.282786] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:16:54.067 2025] [ 1.284125] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:16:54.071 2025] [ 1.285244] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:16:54.075 2025] [ 1.302938] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:16:54.080 2025] [ 1.303324] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:54.085 2025] [ 1.303409] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:16:54.094 2025] [ 1.303659] devtmpfs: mounted [Fri Jan 03 14:16:54.096 2025] [ 1.305052] Freeing unused kernel memory: 1856K [Fri Jan 03 14:16:54.101 2025] [ 1.316543] Run /sbin/init as init process [Fri Jan 03 14:16:54.106 2025] [ 1.316547] with arguments: [Fri Jan 03 14:16:54.110 2025] [ 1.316549] /sbin/init [Fri Jan 03 14:16:54.115 2025] [ 1.316550] with environment: [Fri Jan 03 14:16:54.115 2025] [ 1.316552] HOME=/ [Fri Jan 03 14:16:54.120 2025] [ 1.316554] TERM=linux [Fri Jan 03 14:16:54.124 2025] [ 1.316556] syntec_extend= [Fri Jan 03 14:16:54.124 2025] [ 1.407968] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:16:54.130 2025] [ 1.431441] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:16:54.135 2025] [ 1.432717] Segment Routing with IPv6 [Fri Jan 03 14:16:54.135 2025] [ 1.432750] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:16:54.140 2025] [ 1.481557] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:16:54.173 2025] [ 1.482116] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:16:54.179 2025] [ 1.485376] systemd[1]: Hostname set to . [Fri Jan 03 14:16:54.184 2025] [ 1.611475] systemd-sysv-generator[182]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:16:54.204 2025] [ 1.919140] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:16:54.222 2025] [ 1.921949] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:16:54.242 2025] [ 1.985309] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:16:54.248 2025] [ 1.988736] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:16:54.257 2025] [ 1.990287] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:16:54.260 2025] [ 1.990844] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:16:54.269 2025] [ 1.991209] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:16:54.279 2025] [ 1.991418] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:16:54.281 2025] [ 1.991849] systemd[1]: Reached target Path Units. [Fri Jan 03 14:16:54.286 2025] [ 1.991953] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:16:54.292 2025] [ 1.992022] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:16:54.299 2025] [ 1.992120] systemd[1]: Reached target Swaps. [Fri Jan 03 14:16:54.304 2025] [ 1.996308] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:16:54.310 2025] [ 1.996563] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:16:54.315 2025] [ 2.002675] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:16:54.323 2025] [ 2.003097] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:16:54.329 2025] [ 2.003905] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:16:54.334 2025] [ 2.004415] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:16:54.339 2025] [ 2.004980] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:16:54.344 2025] [ 2.005758] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:16:54.351 2025] [ 2.007089] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:16:54.361 2025] [ 2.007598] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:16:54.367 2025] [ 2.008101] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:16:54.370 2025] [ 2.057257] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:16:54.376 2025] [ 2.061239] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:16:54.386 2025] [ 2.066190] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:16:54.396 2025] [ 2.067016] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:16:54.412 2025] [ 2.068690] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:16:54.421 2025] [ 2.072989] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:16:54.423 2025] [ 2.078807] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:16:54.431 2025] [ 2.083906] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:16:54.437 2025] [ 2.089185] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:16:54.442 2025] [ 2.094025] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:16:54.448 2025] [ 2.100077] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:16:54.453 2025] [ 2.100659] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:16:54.464 2025] [ 2.102063] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:16:54.491 2025] [ 2.102088] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:16:54.502 2025] [ 2.105756] systemd[1]: Starting Journal Service... [Fri Jan 03 14:16:54.507 2025] [ 2.108928] fuse: init (API version 7.37) [Fri Jan 03 14:16:54.508 2025] [ 2.116540] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:16:54.514 2025] [ 2.121978] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:16:54.521 2025] [ 2.127375] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:16:54.531 2025] [ 2.132663] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:16:54.533 2025] [ 2.137669] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:16:54.539 2025] [ 2.149129] systemd[1]: Started RPC Bind. [Fri Jan 03 14:16:54.544 2025] [ 2.150158] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:16:54.549 2025] [ 2.151014] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:16:54.554 2025] [ 2.151894] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:16:54.560 2025] [ 2.152785] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:16:54.565 2025] [ 2.154179] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:16:54.571 2025] [ 2.156432] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:16:54.581 2025] [ 2.156662] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:16:54.587 2025] [ 2.157313] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:16:54.589 2025] [ 2.161830] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:16:54.596 2025] [ 2.164808] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:16:54.601 2025] [ 2.169735] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:16:54.608 2025] [ 2.171995] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:16:54.614 2025] [ 2.172132] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:16:54.619 2025] [ 2.175366] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:16:54.625 2025] [ 2.181934] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:16:54.631 2025] [ 2.201309] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:16:54.637 2025] [ 2.206064] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:16:54.644 2025] [ 2.216957] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:16:54.649 2025] [ 2.218324] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:16:54.656 2025] [ 2.227562] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:16:54.665 2025] [ 2.228232] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:16:54.672 2025] [ 2.229927] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:16:54.674 2025] [ 2.232998] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:16:54.687 2025] [ 2.233309] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:16:54.704 2025] [ 2.269619] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:16:54.706 2025] [ 2.270093] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:16:54.732 2025] [ 2.274492] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:16:54.745 2025] [ 2.288123] systemd[1]: Started Journal Service. [Fri Jan 03 14:16:54.754 2025] [ 2.332085] systemd-journald[193]: Received client request to flush runtime journal. [Fri Jan 03 14:16:54.905 2025] [ 2.719601] random: crng init done [Fri Jan 03 14:16:55.006 2025] [ 2.819796] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:16:55.010 2025] [ 2.819813] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:16:55.029 2025] [ 2.819827] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:16:55.041 2025] [ 2.819864] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:16:55.065 2025] [ 2.819881] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:16:55.088 2025] [ 2.903267] mc: Linux media interface: v0.10 [Fri Jan 03 14:16:55.096 2025] [ 2.907156] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:16:55.100 2025] [ 2.907176] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:16:55.106 2025] [ 2.907212] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:16:55.123 2025] [ 2.907244] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:16:55.133 2025] [ 2.907263] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:16:55.135 2025] [ 2.907266] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:16:55.141 2025] [ 2.907278] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:16:55.160 2025] [ 2.907289] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:16:55.179 2025] [ 2.907297] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:16:55.193 2025] [ 2.907300] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:16:55.208 2025] [ 2.907311] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:16:55.245 2025] [ 2.907324] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:16:55.252 2025] [ 2.922299] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:16:55.261 2025] [ 2.922803] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:16:55.279 2025] [ 2.922815] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:16:55.304 2025] [ 2.922848] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:16:55.313 2025] [ 2.922851] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:16:55.324 2025] [ 2.922880] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:16:55.338 2025] [ 2.923833] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:47:10 UTC (1681066030) [Fri Jan 03 14:16:55.368 2025] [ 2.927117] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:16:55.374 2025] [ 2.944806] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:16:55.407 2025] [ 2.944839] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:16:55.424 2025] [ 2.958873] systemd-journald[193]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:16:55.440 2025] [ 2.958898] systemd-journald[193]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:16:55.456 2025] [ 3.051808] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:16:55.463 2025] [ 3.052021] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:16:55.469 2025] [ 3.052092] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:16:55.476 2025] [ 3.073121] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:16:55.482 2025] [ 3.077652] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:16:55.491 2025] [ 3.077689] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:16:55.497 2025] [ 3.077732] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:16:55.509 2025] [ 3.077741] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:16:55.514 2025] [ 3.184192] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:16:55.524 2025] [ 3.184223] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:16:55.531 2025] [ 3.184228] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:16:55.536 2025] [ 3.184247] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:16:55.551 2025] [ 3.184279] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:16:55.556 2025] [ 3.184295] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:16:55.564 2025] [ 3.184301] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:16:55.573 2025] [ 3.185434] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:16:55.580 2025] [ 3.259522] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:16:55.592 2025] [ 3.260690] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:16:55.599 2025] [ 3.260883] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:16:55.612 2025] [ 3.297434] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:16:55.619 2025] [ 3.297656] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:16:55.629 2025] [ 3.316538] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:16:55.630 2025] [ 3.320641] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:16:55.642 2025] [ 3.320662] Get kick_gpio number= (418) [Fri Jan 03 14:16:55.643 2025] [ 3.342894] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:16:55.649 2025] [ 3.342938] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:16:55.658 2025] [ 3.343907] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:16:55.664 2025] [ 3.343951] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:16:55.674 2025] [ 3.343960] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:16:55.677 2025] [ 3.352221] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:16:55.685 2025] [ 3.352633] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:16:56.301 2025] [ 4.114576] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:16:56.307 2025] [ 4.115068] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:16:56.335 2025] [ 4.145716] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:16:56.348 2025] [ 4.145735] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:16:56.358 2025] [ 4.145753] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:16:56.369 2025] [ 4.145786] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:16:56.376 2025] [ 4.145802] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:16:56.387 2025] [ 4.145808] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:16:56.396 2025] [ 4.146002] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:16:56.491 2025] [ 4.305358] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:16:56.535 2025] [ 4.350695] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:16:56.544 2025] [ 4.350767] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:16:56.550 2025] [ 4.350993] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:16:56.610 2025] [ 4.351004] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:16:56.648 2025] [ 4.387367] xhci-hcd xhci-hcd.4.auto: irq 469, io mem 0x31100000 [Fri Jan 03 14:16:56.657 2025] [ 4.390558] hub 1-0:1.0: USB hub found [Fri Jan 03 14:16:56.670 2025] [ 4.390644] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:16:56.814 2025] [ 4.628561] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:16:56.993 2025] [ 4.806010] hub 1-1:1.0: USB hub found [Fri Jan 03 14:16:56.998 2025] [ 4.812509] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:16:57.031 2025] [ 4.845850] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:16:57.050 2025] [ 4.863920] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:16:57.056 2025] [ 4.865621] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:16:57.079 2025] [ 4.865664] cfg80211: failed to load regulatory.db [Fri Jan 03 14:16:57.194 2025] [ 5.009519] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:16:57.203 2025] [ 5.009564] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:16:57.450 2025] [ 5.265045] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:16:57.455 2025] [ 5.265087] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:57.543 2025] [ 5.359067] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:16:57.552 2025] [ 5.359109] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:57.696 2025] [ 5.521655] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:16:57.711 2025] [ 5.521691] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:57.758 2025] [ 5.581870] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:16:57.821 2025] [ 5.641794] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:16:57.821 2025] [ 5.642380] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:57.963 2025] [ 5.788355] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:16:58.009 2025] [ 5.825083] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:16:58.009 2025] [ 5.825116] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:16:58.151 2025] [ 5.966949] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:16:58.151 2025] [ 5.968021] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:16:58.560 2025] *************************************************************** [Fri Jan 03 14:16:58.560 2025] *************************************************************** [Fri Jan 03 14:16:58.560 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:16:58.576 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:16:58.576 2025] bash [Fri Jan 03 14:16:58.576 2025] cifs-utils [Fri Jan 03 14:16:58.576 2025] dosfstools [Fri Jan 03 14:16:58.576 2025] grub-common [Fri Jan 03 14:16:58.576 2025] grub-editenv [Fri Jan 03 14:16:58.576 2025] grub-efi [Fri Jan 03 14:16:58.576 2025] less [Fri Jan 03 14:16:58.576 2025] lib32-libgcc1 [Fri Jan 03 14:16:58.592 2025] lib32-libstdc++6 [Fri Jan 03 14:16:58.592 2025] libdw1 [Fri Jan 03 14:16:58.592 2025] libelf1 [Fri Jan 03 14:16:58.592 2025] libgcc1 [Fri Jan 03 14:16:58.592 2025] libgdbm-compat4 [Fri Jan 03 14:16:58.592 2025] libgdbm6 [Fri Jan 03 14:16:58.592 2025] libgmp10 [Fri Jan 03 14:16:58.592 2025] libidn2-0 [Fri Jan 03 14:16:58.592 2025] libreadline8 [Fri Jan 03 14:16:58.592 2025] libstdc++6 [Fri Jan 03 14:16:58.592 2025] libunistring2 [Fri Jan 03 14:16:58.592 2025] libvte-2.91-0 [Fri Jan 03 14:16:58.607 2025] nettle [Fri Jan 03 14:16:58.607 2025] onboard [Fri Jan 03 14:16:58.607 2025] parted [Fri Jan 03 14:16:58.607 2025] rxvt-unicode [Fri Jan 03 14:16:58.607 2025] [Fri Jan 03 14:16:58.607 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:16:58.607 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:16:58.607 2025] the opkg remove command. i.e.: [Fri Jan 03 14:16:58.623 2025] opkg remove [Fri Jan 03 14:16:58.623 2025] Where is the name printed in the list above [Fri Jan 03 14:16:58.623 2025] [Fri Jan 03 14:16:58.623 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:16:58.623 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:16:58.639 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:16:58.639 2025] also remove the dependent packages as well [Fri Jan 03 14:16:58.650 2025] *************************************************************** [Fri Jan 03 14:16:58.655 2025] *************************************************************** [Fri Jan 03 14:17:03.891 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:17:03.897 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:17:03.983 2025] [Fri Jan 03 14:17:03.983 2025] _____ _____ _ _ [Fri Jan 03 14:17:03.988 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:17:03.993 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:17:03.998 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:17:04.003 2025] |___| |___| [Fri Jan 03 14:17:04.009 2025] [Fri Jan 03 14:17:04.009 2025] Arago Project am62xx-evm - [Fri Jan 03 14:17:04.009 2025] [Fri Jan 03 14:17:04.009 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:17:04.014 2025] [Fri Jan 03 14:17:04.014 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:17:04.096 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:17:04.284 2025] [ 12.096612] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:17:04.288 2025] [ 12.096634] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:17:04.294 2025] [ 12.096656] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.300 2025] [ 12.096704] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:17:04.306 2025] [ 12.096709] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:17:04.312 2025] [ 12.096716] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.318 2025] [ 12.096754] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:17:04.324 2025] [ 12.096758] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:17:04.330 2025] [ 12.096765] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.335 2025] [ 12.096804] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:17:04.342 2025] [ 12.096810] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:17:04.351 2025] [ 12.096817] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.354 2025] [ 12.096850] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:17:04.361 2025] [ 12.096856] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:17:04.366 2025] [ 12.096863] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.374 2025] [ 12.096897] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:17:04.380 2025] [ 12.096902] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:17:04.386 2025] [ 12.096908] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.395 2025] [ 12.096942] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:17:04.398 2025] [ 12.096950] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:17:04.404 2025] [ 12.096956] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:04.410 2025] [ 12.096991] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:17:04.417 2025] [ 12.096996] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:17:04.422 2025] [ 12.097004] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.528 2025] [ 14.343297] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:17:06.534 2025] [ 14.343324] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:17:06.541 2025] [ 14.343341] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.547 2025] [ 14.343394] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:17:06.552 2025] [ 14.343399] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:17:06.558 2025] [ 14.343405] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.564 2025] [ 14.343439] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:17:06.570 2025] [ 14.343507] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:17:06.576 2025] [ 14.343515] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.583 2025] [ 14.343558] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:17:06.588 2025] [ 14.343563] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:17:06.594 2025] [ 14.343571] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.600 2025] [ 14.343605] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:17:06.610 2025] [ 14.343614] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:17:06.616 2025] [ 14.343622] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.619 2025] [ 14.343655] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:17:06.625 2025] [ 14.343660] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:17:06.631 2025] [ 14.343668] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.637 2025] [ 14.343702] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:17:06.643 2025] [ 14.343707] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:17:06.649 2025] [ 14.343714] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:06.656 2025] [ 14.343748] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:17:06.665 2025] [ 14.343753] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:17:06.671 2025] [ 14.343760] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:07.021 2025] [ 14.835844] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:17:10.348 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:17:10.358 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:17:12.061 2025] [ 19.876009] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:17:12.067 2025] [ 19.876037] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:17:12.073 2025] [ 19.876059] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.079 2025] [ 19.876118] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:17:12.086 2025] [ 19.876125] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:17:12.091 2025] [ 19.876132] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.097 2025] [ 19.876173] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:17:12.103 2025] [ 19.876179] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:17:12.109 2025] [ 19.876188] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.118 2025] [ 19.876222] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:17:12.122 2025] [ 19.876228] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:17:12.128 2025] [ 19.876237] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.134 2025] [ 19.876273] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:17:12.140 2025] [ 19.876278] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:17:12.146 2025] [ 19.876285] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.152 2025] [ 19.876324] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:17:12.162 2025] [ 19.876329] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:17:12.168 2025] [ 19.876336] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.171 2025] [ 19.876371] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:17:12.177 2025] [ 19.876376] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:17:12.183 2025] [ 19.876386] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.190 2025] [ 19.876421] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:17:12.195 2025] [ 19.876426] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:17:12.201 2025] [ 19.876433] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.211 2025] [ 19.945235] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:17:12.217 2025] [ 19.945259] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:17:12.221 2025] [ 19.945286] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.227 2025] [ 19.945352] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:17:12.233 2025] [ 19.945358] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:17:12.239 2025] [ 19.945365] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.245 2025] [ 19.945401] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:17:12.250 2025] [ 19.945406] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:17:12.257 2025] [ 19.945413] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.262 2025] [ 19.945574] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:17:12.268 2025] [ 19.945580] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:17:12.275 2025] [ 19.945591] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.284 2025] [ 19.945635] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:17:12.286 2025] [ 19.945642] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:17:12.293 2025] [ 19.945650] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.304 2025] [ 19.945685] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:17:12.310 2025] [ 19.945690] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:17:12.313 2025] [ 19.945696] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.319 2025] [ 19.945732] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:17:12.325 2025] [ 19.945736] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:17:12.331 2025] [ 19.945744] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:12.337 2025] [ 19.945778] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:17:12.343 2025] [ 19.945785] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:17:12.353 2025] [ 19.945791] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:17:44.829 2025] [Fri Jan 03 14:17:44.829 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:17:44.844 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:17:44.892 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:17:44.907 2025] Trying to boot from MMC1 [Fri Jan 03 14:17:45.081 2025] Authentication passed [Fri Jan 03 14:17:45.081 2025] Authentication passed [Fri Jan 03 14:17:45.097 2025] Authentication passed [Fri Jan 03 14:17:45.128 2025] Authentication passed [Fri Jan 03 14:17:45.144 2025] Authentication passed [Fri Jan 03 14:17:45.144 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:17:45.144 2025] [Fri Jan 03 14:17:45.144 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:17:45.144 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:17:45.443 2025] [Fri Jan 03 14:17:45.443 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:17:45.458 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:17:45.490 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:17:45.506 2025] Error: could not access storage. [Fri Jan 03 14:17:45.506 2025] Trying to boot from MMC1 [Fri Jan 03 14:17:45.663 2025] Authentication passed [Fri Jan 03 14:17:45.663 2025] Authentication passed [Fri Jan 03 14:17:46.324 2025] [Fri Jan 03 14:17:46.324 2025] [Fri Jan 03 14:17:46.324 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:17:46.324 2025] [Fri Jan 03 14:17:46.324 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:17:46.324 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:17:46.339 2025] DRAM: 2 GiB [Fri Jan 03 14:17:46.575 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:17:46.575 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:17:46.591 2025] Loading Environment from MMC... OK [Fri Jan 03 14:17:46.795 2025] In: serial [Fri Jan 03 14:17:46.795 2025] Out: serial [Fri Jan 03 14:17:46.795 2025] Err: serial [Fri Jan 03 14:17:46.795 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:17:46.795 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:17:46.952 2025] switch to partitions #0, OK [Fri Jan 03 14:17:46.968 2025] mmc0(part 0) is current device [Fri Jan 03 14:17:47.110 2025] SD/MMC found on device 0 [Fri Jan 03 14:17:47.110 2025] Running eMMC boot ... [Fri Jan 03 14:17:47.125 2025] 574 bytes read in 15 ms (37.1 KiB/s) [Fri Jan 03 14:17:47.125 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:17:47.125 2025] Importing environment from mmc0 ... [Fri Jan 03 14:17:47.361 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:17:47.377 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:17:47.387 2025] Working FDT set to 88000000 [Fri Jan 03 14:17:47.393 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:17:47.393 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:17:47.393 2025] Working FDT set to 88000000 [Fri Jan 03 14:17:47.424 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:17:47.424 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:17:47.440 2025] Working FDT set to 8feed000 [Fri Jan 03 14:17:47.440 2025] [Fri Jan 03 14:17:47.440 2025] Starting kernel ... [Fri Jan 03 14:17:47.455 2025] [Fri Jan 03 14:17:47.487 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:17:47.487 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:17:47.503 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:17:47.518 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:17:47.611 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:17:47.616 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:17:47.621 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:17:47.626 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:17:47.635 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:17:47.644 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:17:47.652 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:17:47.660 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:17:47.670 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:17:47.678 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:17:47.687 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:17:47.695 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:17:47.704 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:17:47.712 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:17:47.721 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:17:47.725 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:17:47.731 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:17:47.736 2025] [ 0.000000] Normal empty [Fri Jan 03 14:17:47.736 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:17:47.741 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:17:47.746 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:17:47.752 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:17:47.757 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:17:47.763 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:17:47.770 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:17:47.777 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:17:47.786 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:17:47.789 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:17:47.796 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:17:47.802 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:17:47.808 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:17:47.813 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:17:47.818 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:17:47.823 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:17:47.829 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:17:47.834 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:17:47.839 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:17:47.848 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:17:47.853 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:17:47.859 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:17:47.865 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:17:47.870 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:17:47.875 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:17:47.922 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:17:47.931 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:17:47.939 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:17:47.947 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:17:47.957 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:17:47.971 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:17:47.978 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:17:47.983 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:17:47.988 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:17:47.994 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:17:48.000 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:17:48.008 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:17:48.015 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:17:48.022 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:17:48.028 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:17:48.033 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:17:48.037 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:17:48.041 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:17:48.046 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:17:48.052 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:17:48.058 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:17:48.063 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:17:48.069 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:17:48.077 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:17:48.082 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:17:48.090 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:17:48.096 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:17:48.102 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:17:48.109 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:17:48.115 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:17:48.126 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:17:48.134 2025] [ 0.000247] Console: colour dummy device 80x25 [Fri Jan 03 14:17:48.144 2025] [ 0.528893] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:17:48.151 2025] [ 0.528903] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:17:48.156 2025] [ 0.528988] LSM: Security Framework initializing [Fri Jan 03 14:17:48.163 2025] [ 0.529125] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:17:48.168 2025] [ 0.529148] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:17:48.176 2025] [ 0.530838] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:17:48.182 2025] [ 0.530845] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:17:48.187 2025] [ 0.530889] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:17:48.197 2025] [ 0.583353] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:17:48.200 2025] [ 0.583593] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:17:48.209 2025] [ 0.583679] EFI services will not be available. [Fri Jan 03 14:17:48.214 2025] [ 0.583935] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:17:48.219 2025] [ 0.584713] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:17:48.224 2025] [ 0.584823] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:17:48.230 2025] [ 0.584840] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:17:48.237 2025] [ 0.584895] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:17:48.248 2025] [ 0.634974] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:17:48.249 2025] [ 0.635060] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:17:48.256 2025] [ 0.635073] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:17:48.263 2025] [ 0.635105] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:17:48.273 2025] [ 0.660978] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:17:48.275 2025] [ 0.661058] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:17:48.282 2025] [ 0.661071] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:17:48.289 2025] [ 0.661102] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:17:48.296 2025] [ 0.661163] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:17:48.302 2025] [ 0.661169] SMP: Total of 4 processors activated. [Fri Jan 03 14:17:48.307 2025] [ 0.695358] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:17:48.314 2025] [ 0.695362] CPU features: detected: CRC32 instructions [Fri Jan 03 14:17:48.320 2025] [ 0.695410] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:17:48.324 2025] [ 0.695412] alternatives: applying system-wide alternatives [Fri Jan 03 14:17:48.330 2025] [ 0.696885] devtmpfs: initialized [Fri Jan 03 14:17:48.334 2025] [ 0.708500] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:17:48.343 2025] [ 0.708527] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:17:48.350 2025] [ 0.713683] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:17:48.352 2025] [ 0.714495] DMI not present or invalid. [Fri Jan 03 14:17:48.357 2025] [ 0.715025] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:17:48.363 2025] [ 0.729149] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:17:48.370 2025] [ 0.729443] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:17:48.378 2025] [ 0.729640] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:17:48.385 2025] [ 0.729783] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:17:48.391 2025] [ 0.729978] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:17:48.402 2025] [ 0.730603] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:17:48.405 2025] [ 0.730608] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:17:48.412 2025] [ 0.730853] ASID allocator initialised with 65536 entries [Fri Jan 03 14:17:48.417 2025] [ 0.745754] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:17:48.423 2025] [ 0.754880] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:17:48.431 2025] [ 0.754891] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:17:48.437 2025] [ 0.754896] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:17:48.445 2025] [ 0.754898] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:17:48.451 2025] [ 0.754902] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:17:48.458 2025] [ 0.754904] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:17:48.464 2025] [ 0.754908] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:17:48.471 2025] [ 0.754911] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:17:48.478 2025] [ 0.756063] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:17:48.486 2025] [ 0.756569] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:17:48.495 2025] [ 0.756576] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:17:48.500 2025] [ 0.756590] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:17:48.509 2025] [ 0.756605] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:17:48.517 2025] [ 0.756616] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.525 2025] [ 0.756622] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:17:48.532 2025] [ 0.756841] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:17:48.539 2025] [ 0.756846] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:17:48.547 2025] [ 0.756855] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:17:48.555 2025] [ 0.756868] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:17:48.568 2025] [ 0.756876] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.571 2025] [ 0.756880] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:17:48.578 2025] [ 0.757135] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:17:48.585 2025] [ 0.757140] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:17:48.593 2025] [ 0.757149] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:17:48.601 2025] [ 0.757161] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:17:48.609 2025] [ 0.757170] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.617 2025] [ 0.757173] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:17:48.624 2025] [ 0.757388] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:17:48.631 2025] [ 1.02[1327] printk: console [ttyS2] printing thread started [Fri Jan 03 14:17:48.637 2025] 0.757393] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:17:48.648 2025] [ 1.021349] printk: console [ttyS2] enabled [Fri Jan 03 14:17:48.650 2025] [ 1.021353] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:17:48.655 2025] [ 1.034103] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:17:48.661 2025] [ 1.035303] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:17:48.668 2025] [ 1.035314] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:17:48.673 2025] [ 1.035326] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:17:48.684 2025] [ 1.035345] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:17:48.694 2025] [ 1.035357] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.701 2025] [ 1.035363] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:17:48.707 2025] [ 1.035393] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:17:48.716 2025] [ 1.036344] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:17:48.722 2025] [ 1.036354] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:17:48.732 2025] [ 1.036370] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:17:48.737 2025] [ 1.036385] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:17:48.746 2025] [ 1.036395] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.753 2025] [ 1.036400] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:17:48.759 2025] [ 1.039410] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:17:48.766 2025] [ 1.046491] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:17:48.776 2025] [ 1.053219] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:17:48.780 2025] [ 1.053639] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:17:48.786 2025] [ 1.053644] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:17:48.795 2025] [ 1.053659] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:17:48.806 2025] [ 1.053679] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:17:48.818 2025] [ 1.053693] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.820 2025] [ 1.053698] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:17:48.827 2025] [ 1.087000] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:17:48.837 2025] [ 1.087289] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:17:48.840 2025] [ 1.088098] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:17:48.846 2025] [ 1.088105] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:17:48.853 2025] [ 1.088118] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:17:48.865 2025] [ 1.088144] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:17:48.878 2025] [ 1.088163] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.884 2025] [ 1.088167] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:17:48.894 2025] [ 1.088927] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:17:48.899 2025] [ 1.088981] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:17:48.912 2025] [ 1.089234] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:17:48.919 2025] [ 1.089252] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:17:48.925 2025] [ 1.089257] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:17:48.932 2025] [ 1.090033] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:17:48.944 2025] [ 1.106518] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:17:48.947 2025] [ 1.111380] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:17:48.953 2025] [ 1.111396] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:17:48.962 2025] [ 1.111412] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:17:48.969 2025] [ 1.111435] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:17:48.981 2025] [ 1.111435] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:17:48.987 2025] [ 1.111447] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:17:48.994 2025] [ 1.111451] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:17:49.000 2025] [ 1.111894] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:17:49.010 2025] [ 1.111904] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:17:49.016 2025] [ 1.111922] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:17:49.022 2025] [ 1.111943] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:17:49.032 2025] [ 1.111953] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:17:49.039 2025] [ 1.111957] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:17:49.045 2025] [ 1.111963] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:17:49.055 2025] [ 1.111998] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:17:49.057 2025] [ 1.112007] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:17:49.067 2025] [ 1.112021] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:17:49.076 2025] [ 1.112029] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:17:49.083 2025] [ 1.112033] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:17:49.093 2025] [ 1.112511] mmc1: CQHCI version 5.10 [Fri Jan 03 14:17:49.095 2025] [ 1.113097] mmc0: CQHCI version 5.10 [Fri Jan 03 14:17:49.100 2025] [ 1.113373] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:17:49.106 2025] [ 1.113386] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:17:49.112 2025] [ 1.113398] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:17:49.119 2025] [ 1.113416] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:17:49.128 2025] [ 1.113429] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:17:49.139 2025] [ 1.113441] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:17:49.144 2025] [ 1.113920] mmc2: CQHCI version 5.10 [Fri Jan 03 14:17:49.149 2025] [ 1.115300] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:17:49.157 2025] [ 1.117727] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:17:49.170 2025] [ 1.120804] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:17:49.177 2025] [ 1.121003] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:17:49.182 2025] [ 1.121064] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:17:49.189 2025] [ 1.124114] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:17:49.195 2025] [ 1.124315] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:17:49.200 2025] [ 1.124381] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:17:49.207 2025] [ 1.125962] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:17:49.214 2025] [ 1.125979] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:17:49.223 2025] [ 1.125998] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:17:49.230 2025] [ 1.126014] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:17:49.236 2025] [ 1.126026] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:17:49.242 2025] [ 1.126030] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:17:49.249 2025] [ 1.126039] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:17:49.258 2025] [ 1.126050] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:17:49.267 2025] [ 1.126142] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:17:49.274 2025] [ 1.126147] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:17:49.282 2025] [ 1.126865] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:17:49.288 2025] [ 1.126872] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:17:49.294 2025] [ 1.126891] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:17:49.303 2025] [ 1.126904] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:17:49.309 2025] [ 1.126909] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:17:49.314 2025] [ 1.127450] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:17:49.329 2025] [ 1.127464] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:17:49.330 2025] [ 1.127467] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:17:49.336 2025] [ 1.127569] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:17:49.345 2025] [ 1.127580] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:17:49.350 2025] [ 1.127584] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:17:49.356 2025] [ 1.127643] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:17:49.364 2025] [ 1.127654] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:17:49.370 2025] [ 1.127657] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:17:49.375 2025] [ 1.128311] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:17:49.383 2025] [ 1.130928] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:17:49.393 2025] [ 1.143223] ALSA device list: [Fri Jan 03 14:17:49.394 2025] [ 1.143234] No soundcards found. [Fri Jan 03 14:17:49.399 2025] [ 1.151617] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:17:49.405 2025] [ 1.153826] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:17:49.411 2025] [ 1.158750] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:17:49.418 2025] [ 1.193084] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:17:49.426 2025] [ 1.204824] mmc1: new MMC card at address 0001 [Fri Jan 03 14:17:49.431 2025] [ 1.205693] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:17:49.437 2025] [ 1.213718] mmcblk1: p1 [Fri Jan 03 14:17:49.441 2025] [ 1.214556] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:17:49.447 2025] [ 1.216358] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:17:49.451 2025] [ 1.217694] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:17:49.457 2025] [ 1.268177] mmc0: Command Queue Engine enabled [Fri Jan 03 14:17:49.461 2025] [ 1.268195] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:17:49.467 2025] [ 1.268939] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:17:49.471 2025] [ 1.272868] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:17:49.476 2025] [ 1.273932] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:17:49.480 2025] [ 1.275313] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:17:49.485 2025] [ 1.276445] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:17:49.490 2025] [ 1.294579] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:17:49.495 2025] [ 1.294966] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:49.501 2025] [ 1.295059] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:17:49.507 2025] [ 1.295212] devtmpfs: mounted [Fri Jan 03 14:17:49.512 2025] [ 1.296641] Freeing unused kernel memory: 1856K [Fri Jan 03 14:17:49.517 2025] [ 1.309061] Run /sbin/init as init process [Fri Jan 03 14:17:49.522 2025] [ 1.309067] with arguments: [Fri Jan 03 14:17:49.527 2025] [ 1.309068] /sbin/init [Fri Jan 03 14:17:49.532 2025] [ 1.309070] with environment: [Fri Jan 03 14:17:49.532 2025] [ 1.309072] HOME=/ [Fri Jan 03 14:17:49.536 2025] [ 1.309073] TERM=linux [Fri Jan 03 14:17:49.536 2025] [ 1.309075] syntec_extend= [Fri Jan 03 14:17:49.542 2025] [ 1.401185] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:17:49.547 2025] [ 1.422498] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:17:49.551 2025] [ 1.423731] Segment Routing with IPv6 [Fri Jan 03 14:17:49.555 2025] [ 1.423763] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:17:49.560 2025] [ 1.466693] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:17:49.588 2025] [ 1.467277] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:17:49.594 2025] [ 1.470552] systemd[1]: Hostname set to . [Fri Jan 03 14:17:49.599 2025] [ 1.564242] systemd-sysv-generator[181]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:17:49.620 2025] [ 1.884689] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:17:49.639 2025] [ 1.887444] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:17:49.656 2025] [ 1.951131] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:17:49.663 2025] [ 1.954349] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:17:49.669 2025] [ 1.955957] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:17:49.675 2025] [ 1.956484] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:17:49.682 2025] [ 1.956839] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:17:49.689 2025] [ 1.957075] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:17:49.700 2025] [ 1.957475] systemd[1]: Reached target Path Units. [Fri Jan 03 14:17:49.701 2025] [ 1.957571] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:17:49.707 2025] [ 1.957639] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:17:49.713 2025] [ 1.957727] systemd[1]: Reached target Swaps. [Fri Jan 03 14:17:49.719 2025] [ 1.962017] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:17:49.724 2025] [ 1.962206] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:17:49.730 2025] [ 1.968276] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:17:49.735 2025] [ 1.968728] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:17:49.741 2025] [ 1.969556] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:17:49.747 2025] [ 1.970117] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:17:49.759 2025] [ 1.970674] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:17:49.766 2025] [ 1.971437] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:17:49.776 2025] [ 1.973364] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:17:49.781 2025] [ 1.973872] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:17:49.786 2025] [ 1.974381] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:17:49.794 2025] [ 2.027787] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:17:49.799 2025] [ 2.031927] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:17:49.809 2025] [ 2.036661] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:17:49.815 2025] [ 2.037493] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:17:49.824 2025] [ 2.039367] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:17:49.832 2025] [ 2.043540] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:17:49.838 2025] [ 2.049277] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:17:49.845 2025] [ 2.054052] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:17:49.854 2025] [ 2.059111] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:17:49.856 2025] [ 2.064846] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:17:49.863 2025] [ 2.072519] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:17:49.870 2025] [ 2.074429] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:17:49.879 2025] [ 2.077267] fuse: init (API version 7.37) [Fri Jan 03 14:17:49.886 2025] [ 2.077398] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:17:49.895 2025] [ 2.077412] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:17:49.904 2025] [ 2.081174] systemd[1]: Starting Journal Service... [Fri Jan 03 14:17:49.913 2025] [ 2.088261] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:17:49.914 2025] [ 2.093364] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:17:49.925 2025] [ 2.098355] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:17:49.928 2025] [ 2.103256] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:17:49.934 2025] [ 2.109634] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:17:49.939 2025] [ 2.123087] systemd[1]: Started RPC Bind. [Fri Jan 03 14:17:49.944 2025] [ 2.124535] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:17:49.950 2025] [ 2.125646] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:17:49.955 2025] [ 2.127843] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:17:49.961 2025] [ 2.131721] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:17:49.966 2025] [ 2.139551] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:17:49.972 2025] [ 2.147706] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:17:49.979 2025] [ 2.150701] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:17:49.985 2025] [ 2.153586] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:17:49.995 2025] [ 2.157827] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:17:49.997 2025] [ 2.160323] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:17:50.003 2025] [ 2.163428] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:17:50.013 2025] [ 2.164547] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:17:50.015 2025] [ 2.166536] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:17:50.026 2025] [ 2.170221] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:17:50.028 2025] [ 2.174265] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:17:50.033 2025] [ 2.178949] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:17:50.038 2025] [ 2.197244] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:17:50.044 2025] [ 2.202535] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:17:50.050 2025] [ 2.209802] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:17:50.055 2025] [ 2.214939] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:17:50.061 2025] [ 2.218534] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:17:50.067 2025] [ 2.219281] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:17:50.073 2025] [ 2.222292] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:17:50.086 2025] [ 2.222609] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:17:50.103 2025] [ 2.226748] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:17:50.108 2025] [ 2.227289] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:17:50.115 2025] [ 2.232696] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:17:50.122 2025] [ 2.288647] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:17:50.129 2025] [ 2.336009] systemd[1]: Started Journal Service. [Fri Jan 03 14:17:50.134 2025] [ 2.374252] systemd-journald[192]: Received client request to flush runtime journal. [Fri Jan 03 14:17:50.355 2025] [ 2.743150] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:17:50.364 2025] [ 2.743168] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:17:50.372 2025] [ 2.743188] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:17:50.385 2025] [ 2.743221] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:17:50.407 2025] [ 2.743241] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:17:50.411 2025] [ 2.750338] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:17:50.417 2025] [ 2.750361] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:17:50.428 2025] [ 2.750391] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:17:50.440 2025] [ 2.750412] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:17:50.447 2025] [ 2.750429] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:17:50.454 2025] [ 2.750433] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:17:50.464 2025] [ 2.750445] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:17:50.478 2025] [ 2.750457] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:17:50.491 2025] [ 2.750469] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:17:50.497 2025] [ 2.750473] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:17:50.537 2025] [ 2.750483] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:17:50.553 2025] [ 2.750494] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:17:50.575 2025] [ 2.762810] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:17:50.583 2025] [ 2.762827] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:17:50.587 2025] [ 2.762859] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:17:50.597 2025] [ 2.762862] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:17:50.611 2025] [ 2.762890] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:17:50.623 2025] [ 2.802364] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:17:50.632 2025] [ 2.803910] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:48:05 UTC (1681066085) [Fri Jan 03 14:17:50.646 2025] [ 2.803940] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:17:50.697 2025] [ 2.803955] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:17:50.712 2025] [ 2.806807] systemd-journald[192]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:17:50.728 2025] [ 2.806839] systemd-journald[192]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:17:50.746 2025] [ 2.850831] mc: Linux media interface: v0.10 [Fri Jan 03 14:17:50.751 2025] [ 2.880456] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:17:50.756 2025] [ 2.947403] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:17:50.763 2025] [ 2.948090] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:17:50.779 2025] [ 2.950291] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:17:50.786 2025] [ 2.958235] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:17:50.793 2025] [ 2.959727] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:17:50.808 2025] [ 2.959778] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:17:50.821 2025] [ 2.959820] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:17:50.837 2025] [ 2.959828] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:17:50.843 2025] [ 3.126213] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:17:50.854 2025] [ 3.199151] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:17:50.865 2025] [ 3.199501] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:17:50.871 2025] [ 3.200115] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:17:50.885 2025] [ 3.200141] Get kick_gpio number= (418) [Fri Jan 03 14:17:50.886 2025] [ 3.201498] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:17:50.895 2025] [ 3.201684] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:17:50.909 2025] [ 3.203849] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:17:50.915 2025] [ 3.203937] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:17:50.921 2025] [ 3.231281] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:17:50.926 2025] [ 3.231317] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:17:50.932 2025] [ 3.231325] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:17:50.948 2025] [ 3.231345] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:17:50.962 2025] [ 3.231374] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:17:50.972 2025] [ 3.231394] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:17:50.979 2025] [ 3.231401] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:17:50.982 2025] [ 3.235298] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:17:50.990 2025] [ 3.235341] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:17:51.016 2025] [ 3.236873] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:17:51.027 2025] [ 3.236922] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7) [Fri Jan 03 14:17:51.038 2025] [ 3.236930] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:17:51.070 2025] [ 3.237760] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:17:51.096 2025] [ 3.237938] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:17:51.451 2025] [ 3.838081] random: crng init done [Fri Jan 03 14:17:51.605 2025] [ 3.992606] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:17:51.614 2025] [ 3.992630] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:17:51.636 2025] [ 3.992646] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:17:51.657 2025] [ 3.992672] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:17:51.670 2025] [ 3.992687] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:17:51.673 2025] [ 3.992694] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:17:51.679 2025] [ 3.992879] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:17:51.695 2025] [ 4.033941] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:17:51.706 2025] [ 4.037315] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:17:51.778 2025] [ 4.163814] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:17:51.902 2025] [ 4.290396] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:17:51.913 2025] [ 4.290461] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:17:51.933 2025] [ 4.290664] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:17:51.940 2025] [ 4.290674] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:17:51.963 2025] [ 4.307317] xhci-hcd xhci-hcd.4.auto: irq 470, io mem 0x31100000 [Fri Jan 03 14:17:51.969 2025] [ 4.314658] hub 1-0:1.0: USB hub found [Fri Jan 03 14:17:51.973 2025] [ 4.314751] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:17:52.171 2025] [ 4.557071] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:17:52.336 2025] [ 4.724124] hub 1-1:1.0: USB hub found [Fri Jan 03 14:17:52.339 2025] [ 4.724274] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:17:52.835 2025] [ 5.223918] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:17:52.868 2025] [ 5.256462] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:17:52.875 2025] [ 5.258097] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:17:52.887 2025] [ 5.258127] cfg80211: failed to load regulatory.db [Fri Jan 03 14:17:52.915 2025] [ 5.303904] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:17:52.922 2025] [ 5.303947] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:52.946 2025] [ 5.335796] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:17:52.954 2025] [ 5.335839] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:52.982 2025] [ 5.338905] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:17:52.990 2025] [ 5.338939] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:53.003 2025] [ 5.371474] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:17:53.027 2025] [ 5.416927] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:17:53.036 2025] [ 5.416966] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:17:53.064 2025] [ 5.453504] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:17:53.068 2025] [ 5.454117] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:53.354 2025] [ 5.742179] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:17:53.358 2025] [ 5.743544] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:17:53.583 2025] [ 5.964513] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:17:53.604 2025] [ 6.004708] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:17:53.620 2025] [ 6.004754] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:17:53.777 2025] *************************************************************** [Fri Jan 03 14:17:53.792 2025] *************************************************************** [Fri Jan 03 14:17:53.798 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:17:53.798 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:17:53.808 2025] bash [Fri Jan 03 14:17:53.808 2025] cifs-utils [Fri Jan 03 14:17:53.808 2025] dosfstools [Fri Jan 03 14:17:53.808 2025] grub-common [Fri Jan 03 14:17:53.808 2025] grub-editenv [Fri Jan 03 14:17:53.808 2025] grub-efi [Fri Jan 03 14:17:53.808 2025] less [Fri Jan 03 14:17:53.808 2025] lib32-libgcc1 [Fri Jan 03 14:17:53.808 2025] lib32-libstdc++6 [Fri Jan 03 14:17:53.808 2025] libdw1 [Fri Jan 03 14:17:53.808 2025] libelf1 [Fri Jan 03 14:17:53.808 2025] libgcc1 [Fri Jan 03 14:17:53.824 2025] libgdbm-compat4 [Fri Jan 03 14:17:53.824 2025] libgdbm6 [Fri Jan 03 14:17:53.824 2025] libgmp10 [Fri Jan 03 14:17:53.824 2025] libidn2-0 [Fri Jan 03 14:17:53.824 2025] libreadline8 [Fri Jan 03 14:17:53.824 2025] libstdc++6 [Fri Jan 03 14:17:53.824 2025] libunistring2 [Fri Jan 03 14:17:53.824 2025] libvte-2.91-0 [Fri Jan 03 14:17:53.824 2025] nettle [Fri Jan 03 14:17:53.824 2025] onboard [Fri Jan 03 14:17:53.824 2025] parted [Fri Jan 03 14:17:53.824 2025] rxvt-unicode [Fri Jan 03 14:17:53.839 2025] [Fri Jan 03 14:17:53.839 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:17:53.839 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:17:53.839 2025] the opkg remove command. i.e.: [Fri Jan 03 14:17:53.839 2025] opkg remove [Fri Jan 03 14:17:53.839 2025] Where is the name printed in the list above [Fri Jan 03 14:17:53.855 2025] [Fri Jan 03 14:17:53.855 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:17:53.855 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:17:53.855 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:17:53.871 2025] also remove the dependent packages as well [Fri Jan 03 14:17:53.871 2025] *************************************************************** [Fri Jan 03 14:17:53.871 2025] *************************************************************** [Fri Jan 03 14:17:59.570 2025] [Fri Jan 03 14:17:59.570 2025] _____ _____ _ _ [Fri Jan 03 14:17:59.570 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:17:59.589 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:17:59.595 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:17:59.600 2025] |___| |___| [Fri Jan 03 14:17:59.605 2025] [Fri Jan 03 14:17:59.605 2025] Arago Project am62xx-evm - [Fri Jan 03 14:17:59.605 2025] [Fri Jan 03 14:17:59.605 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:17:59.611 2025] [Fri Jan 03 14:17:59.611 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:17:59.820 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:18:00.008 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:18:00.013 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:18:00.190 2025] [ 12.577872] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:00.197 2025] [ 12.577901] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:00.200 2025] [ 12.577916] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.206 2025] [ 12.578071] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:00.213 2025] [ 12.578080] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:00.218 2025] [ 12.578090] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.225 2025] [ 12.578149] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:00.230 2025] [ 12.578154] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:00.242 2025] [ 12.578162] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.244 2025] [ 12.578202] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:00.250 2025] [ 12.578207] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:00.256 2025] [ 12.578214] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.262 2025] [ 12.578254] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:00.267 2025] [ 12.578259] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:00.274 2025] [ 12.578266] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.283 2025] [ 12.578301] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:00.286 2025] [ 12.578306] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:00.293 2025] [ 12.578316] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.299 2025] [ 12.578351] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:00.305 2025] [ 12.578356] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:00.311 2025] [ 12.578364] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:00.318 2025] [ 12.578403] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:00.324 2025] [ 12.578409] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:00.330 2025] [ 12.578416] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.492 2025] [ 14.880626] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:02.500 2025] [ 14.880648] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:02.506 2025] [ 14.880665] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.509 2025] [ 14.880717] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:02.515 2025] [ 14.880722] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:02.521 2025] [ 14.880729] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.528 2025] [ 14.880767] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:02.534 2025] [ 14.880772] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:02.540 2025] [ 14.880778] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.546 2025] [ 14.880812] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:02.552 2025] [ 14.880818] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:02.558 2025] [ 14.880824] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.564 2025] [ 14.880859] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:02.570 2025] [ 14.880864] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:02.580 2025] [ 14.880871] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.583 2025] [ 14.880904] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:02.589 2025] [ 14.880909] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:02.595 2025] [ 14.880915] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.601 2025] [ 14.880948] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:02.607 2025] [ 14.880953] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:02.613 2025] [ 14.880960] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.619 2025] [ 14.881148] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:02.626 2025] [ 14.881155] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:02.631 2025] [ 14.881164] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:02.984 2025] [ 15.371693] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:18:06.238 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:18:06.238 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:18:08.073 2025] [ 20.462634] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:08.083 2025] [ 20.462673] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:08.089 2025] [ 20.462709] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.092 2025] [ 20.462792] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:08.099 2025] [ 20.462798] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:08.105 2025] [ 20.462805] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.110 2025] [ 20.462843] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:08.116 2025] [ 20.462848] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:08.122 2025] [ 20.462858] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.127 2025] [ 20.462893] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:08.138 2025] [ 20.462898] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:08.150 2025] [ 20.462906] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.167 2025] [ 20.462942] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:08.181 2025] [ 20.462947] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:08.191 2025] [ 20.462954] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.199 2025] [ 20.463110] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:08.202 2025] [ 20.463116] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:08.208 2025] [ 20.463125] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.214 2025] [ 20.463166] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:08.220 2025] [ 20.463172] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:08.230 2025] [ 20.463179] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.233 2025] [ 20.463220] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:08.239 2025] [ 20.463225] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:08.246 2025] [ 20.463232] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.251 2025] [ 20.541157] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:08.257 2025] [ 20.541189] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:08.264 2025] [ 20.541216] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.269 2025] [ 20.541304] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:08.276 2025] [ 20.541311] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:08.282 2025] [ 20.541321] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.289 2025] [ 20.541359] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:08.294 2025] [ 20.541364] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:08.303 2025] [ 20.541372] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.306 2025] [ 20.541413] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:08.311 2025] [ 20.541418] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:08.317 2025] [ 20.541426] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.323 2025] [ 20.541467] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:08.329 2025] [ 20.541472] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:08.335 2025] [ 20.541479] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.342 2025] [ 20.541514] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:08.349 2025] [ 20.541519] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:08.356 2025] [ 20.541527] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.361 2025] [ 20.541565] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:08.367 2025] [ 20.541570] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:08.374 2025] [ 20.541577] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:08.379 2025] [ 20.541611] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:08.385 2025] [ 20.541617] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:08.391 2025] [ 20.541626] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:40.689 2025] [Fri Jan 03 14:18:40.689 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:18:40.712 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:18:40.760 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:18:40.781 2025] Trying to boot from MMC1 [Fri Jan 03 14:18:40.954 2025] Authentication passed [Fri Jan 03 14:18:40.960 2025] Authentication passed [Fri Jan 03 14:18:40.966 2025] Authentication passed [Fri Jan 03 14:18:41.001 2025] Authentication passed [Fri Jan 03 14:18:41.007 2025] Authentication passed [Fri Jan 03 14:18:41.013 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:18:41.015 2025] [Fri Jan 03 14:18:41.019 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:18:41.026 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:18:41.317 2025] [Fri Jan 03 14:18:41.317 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:18:41.322 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:18:41.363 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:18:41.366 2025] Error: could not access storage. [Fri Jan 03 14:18:41.371 2025] Trying to boot from MMC1 [Fri Jan 03 14:18:41.528 2025] Authentication passed [Fri Jan 03 14:18:41.534 2025] Authentication passed [Fri Jan 03 14:18:42.168 2025] [Fri Jan 03 14:18:42.168 2025] [Fri Jan 03 14:18:42.168 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:18:42.183 2025] [Fri Jan 03 14:18:42.183 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:18:42.183 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:18:42.183 2025] DRAM: 2 GiB [Fri Jan 03 14:18:42.419 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:18:42.419 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:18:42.439 2025] Loading Environment from MMC... OK [Fri Jan 03 14:18:42.639 2025] In: serial [Fri Jan 03 14:18:42.639 2025] Out: serial [Fri Jan 03 14:18:42.655 2025] Err: serial [Fri Jan 03 14:18:42.655 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:18:42.655 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:18:42.812 2025] switch to partitions #0, OK [Fri Jan 03 14:18:42.812 2025] mmc0(part 0) is current device [Fri Jan 03 14:18:42.954 2025] SD/MMC found on device 0 [Fri Jan 03 14:18:42.954 2025] Running eMMC boot ... [Fri Jan 03 14:18:42.970 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:18:42.985 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:18:42.985 2025] Importing environment from mmc0 ... [Fri Jan 03 14:18:43.205 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:18:43.221 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:18:43.236 2025] Working FDT set to 88000000 [Fri Jan 03 14:18:43.241 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:18:43.241 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:18:43.241 2025] Working FDT set to 88000000 [Fri Jan 03 14:18:43.268 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:18:43.268 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:18:43.284 2025] Working FDT set to 8feed000 [Fri Jan 03 14:18:43.299 2025] [Fri Jan 03 14:18:43.299 2025] Starting kernel ... [Fri Jan 03 14:18:43.299 2025] [Fri Jan 03 14:18:43.331 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:18:43.341 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:18:43.347 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:18:43.363 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:18:43.457 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:18:43.457 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:18:43.457 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:18:43.472 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:18:43.472 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:18:43.488 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:18:43.488 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:18:43.504 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:18:43.504 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:18:43.519 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:18:43.519 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:18:43.542 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:18:43.551 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:18:43.551 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:18:43.567 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:18:43.567 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:18:43.567 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:18:43.582 2025] [ 0.000000] Normal empty [Fri Jan 03 14:18:43.582 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:18:43.582 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:18:43.582 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:18:43.603 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:18:43.608 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:18:43.613 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:18:43.619 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:18:43.628 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:18:43.630 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:18:43.636 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:18:43.648 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:18:43.650 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:18:43.655 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:18:43.660 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:18:43.665 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:18:43.670 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:18:43.677 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:18:43.682 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:18:43.687 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:18:43.693 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:18:43.699 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:18:43.705 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:18:43.711 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:18:43.716 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:18:43.725 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:18:43.773 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:18:43.779 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:18:43.787 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:18:43.799 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:18:43.802 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:18:43.820 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:18:43.826 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:18:43.831 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:18:43.836 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:18:43.842 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:18:43.847 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:18:43.855 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:18:43.862 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:18:43.867 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:18:43.873 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:18:43.879 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:18:43.884 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:18:43.888 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:18:43.899 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:18:43.900 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:18:43.904 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:18:43.910 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:18:43.916 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:18:43.924 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:18:43.930 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:18:43.937 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:18:43.943 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:18:43.949 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:18:43.956 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:18:43.963 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:18:43.973 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:18:43.981 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 14:18:43.992 2025] [ 0.528886] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:18:43.999 2025] [ 0.528896] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:18:44.005 2025] [ 0.528979] LSM: Security Framework initializing [Fri Jan 03 14:18:44.010 2025] [ 0.529112] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:18:44.019 2025] [ 0.529135] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:18:44.028 2025] [ 0.530828] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:18:44.030 2025] [ 0.530835] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:18:44.035 2025] [ 0.530880] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:18:44.045 2025] [ 0.583344] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:18:44.048 2025] [ 0.583585] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:18:44.057 2025] [ 0.583670] EFI services will not be available. [Fri Jan 03 14:18:44.061 2025] [ 0.583931] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:18:44.067 2025] [ 0.584697] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:18:44.072 2025] [ 0.584810] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:18:44.078 2025] [ 0.584826] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:18:44.084 2025] [ 0.584881] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:18:44.095 2025] [ 0.634973] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:18:44.096 2025] [ 0.635055] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:18:44.103 2025] [ 0.635068] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:18:44.111 2025] [ 0.635100] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:18:44.122 2025] [ 0.660984] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:18:44.123 2025] [ 0.661066] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:18:44.130 2025] [ 0.661077] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:18:44.137 2025] [ 0.661108] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:18:44.144 2025] [ 0.661170] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:18:44.149 2025] [ 0.661175] SMP: Total of 4 processors activated. [Fri Jan 03 14:18:44.154 2025] [ 0.695369] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:18:44.160 2025] [ 0.695372] CPU features: detected: CRC32 instructions [Fri Jan 03 14:18:44.166 2025] [ 0.695417] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:18:44.171 2025] [ 0.695419] alternatives: applying system-wide alternatives [Fri Jan 03 14:18:44.176 2025] [ 0.696979] devtmpfs: initialized [Fri Jan 03 14:18:44.180 2025] [ 0.708554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:18:44.187 2025] [ 0.708579] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:18:44.194 2025] [ 0.713692] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:18:44.200 2025] [ 0.714499] DMI not present or invalid. [Fri Jan 03 14:18:44.205 2025] [ 0.715032] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:18:44.210 2025] [ 0.729135] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:18:44.217 2025] [ 0.729418] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:18:44.224 2025] [ 0.729613] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:18:44.237 2025] [ 0.729756] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:18:44.238 2025] [ 0.729947] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:18:44.247 2025] [ 0.730577] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:18:44.252 2025] [ 0.730582] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:18:44.260 2025] [ 0.730823] ASID allocator initialised with 65536 entries [Fri Jan 03 14:18:44.265 2025] [ 0.745702] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:18:44.272 2025] [ 0.754845] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:18:44.278 2025] [ 0.754855] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:18:44.285 2025] [ 0.754860] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:18:44.293 2025] [ 0.754862] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:18:44.299 2025] [ 0.754866] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:18:44.306 2025] [ 0.754868] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:18:44.313 2025] [ 0.754872] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:18:44.319 2025] [ 0.754875] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:18:44.325 2025] [ 0.756041] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:18:44.333 2025] [ 0.756535] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:18:44.340 2025] [ 0.756542] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:18:44.351 2025] [ 0.756554] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:18:44.356 2025] [ 0.756570] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:18:44.366 2025] [ 0.756581] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.372 2025] [ 0.756587] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:18:44.379 2025] [ 0.756808] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:18:44.386 2025] [ 0.756812] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:18:44.393 2025] [ 0.756823] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:18:44.402 2025] [ 0.756835] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:18:44.410 2025] [ 0.756843] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.418 2025] [ 0.756847] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:18:44.425 2025] [ 0.757100] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:18:44.432 2025] [ 0.757105] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:18:44.439 2025] [ 0.757118] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:18:44.448 2025] [ 0.757130] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:18:44.456 2025] [ 0.757138] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.464 2025] [ 0.757142] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:18:44.470 2025] [ 0.757357] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:18:44.478 2025] [ 0.757362] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:18:44.485 2025] [ 0.757371] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:18:44.497 2025] [ 0.757383] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:18:44.502 2025] [ 0.757392] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.509 2025] [ 0.757396] reg-fixed-voltage regulator-3: No GPIO consumer (null) found [Fri Jan 03 14:18:44.520 2025] [ [1.059590] printk: console [ttyS2] printing thread started [Fri Jan 03 14:18:44.522 2025] 0.757608] reg-fixed-voltage regulator-5: GPIO lookup for consumer (null) [Fri Jan 03 14:18:44.533 2025] [ 1.059595] printk: console [ttyS2] enabled [Fri Jan 03 14:18:44.534 2025] [ 1.059600] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:18:44.539 2025] [ 1.072183] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:18:44.546 2025] [ 1.073352] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:18:44.552 2025] [ 1.073361] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:18:44.559 2025] [ 1.073374] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:18:44.569 2025] [ 1.073391] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:18:44.583 2025] [ 1.073403] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.586 2025] [ 1.073408] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:18:44.593 2025] [ 1.073438] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:18:44.601 2025] [ 1.074361] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:18:44.611 2025] [ 1.074370] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:18:44.614 2025] [ 1.074383] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:18:44.623 2025] [ 1.074398] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:18:44.635 2025] [ 1.074409] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.638 2025] [ 1.074414] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:18:44.648 2025] [ 1.077447] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:18:44.652 2025] [ 1.084486] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:18:44.661 2025] [ 1.091012] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:18:44.667 2025] [ 1.091449] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:18:44.673 2025] [ 1.091459] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:18:44.679 2025] [ 1.091473] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:18:44.690 2025] [ 1.091491] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:18:44.700 2025] [ 1.091505] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.706 2025] [ 1.091510] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:18:44.713 2025] [ 1.124942] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:18:44.721 2025] [ 1.125230] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:18:44.728 2025] [ 1.126000] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:18:44.734 2025] [ 1.126010] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:18:44.740 2025] [ 1.126027] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:18:44.752 2025] [ 1.126050] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:18:44.764 2025] [ 1.126066] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.771 2025] [ 1.126070] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:18:44.778 2025] [ 1.126809] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:18:44.785 2025] [ 1.126858] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:18:44.798 2025] [ 1.127135] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:18:44.804 2025] [ 1.127147] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:18:44.811 2025] [ 1.127153] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:18:44.817 2025] [ 1.127981] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:18:44.826 2025] [ 1.144463] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:18:44.833 2025] [ 1.149387] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:18:44.838 2025] [ 1.149387] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:18:44.845 2025] [ 1.149402] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:18:44.851 2025] [ 1.149402] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:18:44.857 2025] [ 1.149415] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:18:44.867 2025] [ 1.149417] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:18:44.881 2025] [ 1.149443] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:18:44.887 2025] [ 1.149444] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:18:44.900 2025] [ 1.149446] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:18:44.906 2025] [ 1.149454] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.913 2025] [ 1.149454] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.920 2025] [ 1.149459] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:18:44.927 2025] [ 1.149459] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:18:44.932 2025] [ 1.149465] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:18:44.937 2025] [ 1.149468] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:18:44.944 2025] [ 1.149476] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:18:44.956 2025] [ 1.149494] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:18:44.962 2025] [ 1.149503] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:18:44.969 2025] [ 1.149507] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:18:44.979 2025] [ 1.150280] mmc1: CQHCI version 5.10 [Fri Jan 03 14:18:44.981 2025] [ 1.150590] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:18:44.986 2025] [ 1.150599] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:18:44.993 2025] [ 1.150611] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:18:45.001 2025] [ 1.150632] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:18:45.010 2025] [ 1.150644] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:18:45.017 2025] [ 1.150649] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:18:45.023 2025] [ 1.151097] mmc2: CQHCI version 5.10 [Fri Jan 03 14:18:45.029 2025] [ 1.151793] mmc0: CQHCI version 5.10 [Fri Jan 03 14:18:45.033 2025] [ 1.153626] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:18:45.040 2025] [ 1.156133] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:18:45.053 2025] [ 1.159196] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:18:45.062 2025] [ 1.159393] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:18:45.065 2025] [ 1.159461] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:18:45.075 2025] [ 1.162627] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:18:45.077 2025] [ 1.162846] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:18:45.083 2025] [ 1.162918] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:18:45.091 2025] [ 1.164508] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:18:45.100 2025] [ 1.164517] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:18:45.104 2025] [ 1.164537] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:18:45.114 2025] [ 1.164553] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:18:45.120 2025] [ 1.164569] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:18:45.127 2025] [ 1.164573] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:18:45.136 2025] [ 1.164583] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:18:45.145 2025] [ 1.164594] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:18:45.154 2025] [ 1.164604] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:18:45.161 2025] [ 1.164609] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:18:45.164 2025] [ 1.165074] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:18:45.170 2025] [ 1.165079] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:18:45.177 2025] [ 1.165093] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:18:45.186 2025] [ 1.165106] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:18:45.193 2025] [ 1.165110] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:18:45.199 2025] [ 1.165607] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:18:45.207 2025] [ 1.165620] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:18:45.213 2025] [ 1.165624] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:18:45.219 2025] [ 1.165723] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:18:45.227 2025] [ 1.165734] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:18:45.233 2025] [ 1.165738] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:18:45.240 2025] [ 1.165801] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:18:45.247 2025] [ 1.165811] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:45.253 2025] [ 1.165814] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:18:45.259 2025] [ 1.166511] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:18:45.268 2025] [ 1.169301] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:18:45.273 2025] [ 1.181470] ALSA device list: [Fri Jan 03 14:18:45.278 2025] [ 1.181481] No soundcards found. [Fri Jan 03 14:18:45.283 2025] [ 1.187353] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:18:45.288 2025] [ 1.192595] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:18:45.295 2025] [ 1.202138] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:18:45.303 2025] [ 1.202299] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:18:45.310 2025] [ 1.248219] mmc1: new MMC card at address 0001 [Fri Jan 03 14:18:45.315 2025] [ 1.249043] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:18:45.320 2025] [ 1.257025] mmcblk1: p1 [Fri Jan 03 14:18:45.325 2025] [ 1.257767] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:18:45.330 2025] [ 1.259501] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:18:45.335 2025] [ 1.260833] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:18:45.340 2025] [ 1.307136] mmc0: Command Queue Engine enabled [Fri Jan 03 14:18:45.345 2025] [ 1.307153] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:18:45.353 2025] [ 1.307861] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:18:45.355 2025] [ 1.311732] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:18:45.359 2025] [ 1.312791] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:18:45.364 2025] [ 1.314179] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:18:45.365 2025] [ 1.315309] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:18:45.371 2025] [ 1.341345] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:18:45.378 2025] [ 1.341720] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:45.384 2025] [ 1.341806] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:18:45.390 2025] [ 1.342057] devtmpfs: mounted [Fri Jan 03 14:18:45.395 2025] [ 1.343443] Freeing unused kernel memory: 1856K [Fri Jan 03 14:18:45.402 2025] [ 1.343561] Run /sbin/init as init process [Fri Jan 03 14:18:45.407 2025] [ 1.343564] with arguments: [Fri Jan 03 14:18:45.411 2025] [ 1.343565] /sbin/init [Fri Jan 03 14:18:45.415 2025] [ 1.343567] with environment: [Fri Jan 03 14:18:45.416 2025] [ 1.343568] HOME=/ [Fri Jan 03 14:18:45.420 2025] [ 1.343570] TERM=linux [Fri Jan 03 14:18:45.420 2025] [ 1.343572] syntec_extend= [Fri Jan 03 14:18:45.425 2025] [ 1.434837] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:18:45.433 2025] [ 1.459007] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:18:45.438 2025] [ 1.460204] Segment Routing with IPv6 [Fri Jan 03 14:18:45.438 2025] [ 1.460236] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:18:45.443 2025] [ 1.505128] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:18:45.469 2025] [ 1.505689] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:18:45.475 2025] [ 1.508977] systemd[1]: Hostname set to . [Fri Jan 03 14:18:45.480 2025] [ 1.637332] systemd-sysv-generator[183]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:18:45.505 2025] [ 1.938207] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:18:45.523 2025] [ 1.940979] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:18:45.539 2025] [ 2.003550] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:18:45.546 2025] [ 2.006736] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:18:45.552 2025] [ 2.008263] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:18:45.559 2025] [ 2.008748] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:18:45.566 2025] [ 2.009113] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:18:45.573 2025] [ 2.009329] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:18:45.580 2025] [ 2.009705] systemd[1]: Reached target Path Units. [Fri Jan 03 14:18:45.584 2025] [ 2.009807] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:18:45.584 2025] [ 2.009885] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:18:45.600 2025] [ 2.009991] systemd[1]: Reached target Swaps. [Fri Jan 03 14:18:45.600 2025] [ 2.014232] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:18:45.600 2025] [ 2.014410] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:18:45.600 2025] [ 2.020489] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:18:45.616 2025] [ 2.021026] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:18:45.616 2025] [ 2.021850] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:18:45.631 2025] [ 2.022444] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:18:45.631 2025] [ 2.022989] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:18:45.631 2025] [ 2.023701] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:18:45.647 2025] [ 2.025515] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:18:45.647 2025] [ 2.026050] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:18:45.647 2025] [ 2.026530] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:18:45.663 2025] [ 2.082670] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:18:45.679 2025] [ 2.086802] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:18:45.679 2025] [ 2.091447] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:18:45.679 2025] [ 2.092298] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:18:45.694 2025] [ 2.094169] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:18:45.710 2025] [ 2.098396] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:18:45.710 2025] [ 2.104350] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:18:45.710 2025] [ 2.109476] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:18:45.725 2025] [ 2.114705] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:18:45.725 2025] [ 2.119519] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:18:45.741 2025] [ 2.125727] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:18:45.744 2025] [ 2.126413] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:18:45.757 2025] [ 2.127784] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:18:45.773 2025] [ 2.127805] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:18:45.773 2025] [ 2.131706] systemd[1]: Starting Journal Service... [Fri Jan 03 14:18:45.788 2025] [ 2.136721] fuse: init (API version 7.37) [Fri Jan 03 14:18:45.788 2025] [ 2.141270] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:18:45.788 2025] [ 2.146804] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:18:45.804 2025] [ 2.152270] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:18:45.804 2025] [ 2.157981] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:18:45.804 2025] [ 2.162919] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:18:45.820 2025] [ 2.177022] systemd[1]: Started RPC Bind. [Fri Jan 03 14:18:45.820 2025] [ 2.178452] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:18:45.820 2025] [ 2.180169] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:18:45.835 2025] [ 2.181862] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:18:45.844 2025] [ 2.182605] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:18:45.844 2025] [ 2.183881] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:18:45.851 2025] [ 2.187646] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:18:45.851 2025] [ 2.190726] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:18:45.867 2025] [ 2.192360] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:18:45.867 2025] [ 2.202039] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:18:45.867 2025] [ 2.203068] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:18:45.882 2025] [ 2.206616] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:18:45.882 2025] [ 2.209540] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:18:45.898 2025] [ 2.211031] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:18:45.898 2025] [ 2.213495] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:18:45.898 2025] [ 2.214434] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:18:45.914 2025] [ 2.215076] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:18:45.914 2025] [ 2.234467] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:18:45.929 2025] [ 2.238436] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:18:45.929 2025] [ 2.245472] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:18:45.929 2025] [ 2.252601] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:18:45.945 2025] [ 2.266866] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:18:45.945 2025] [ 2.268097] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:18:45.945 2025] [ 2.268734] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:18:45.961 2025] [ 2.274476] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:18:45.977 2025] [ 2.274804] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:18:45.992 2025] [ 2.275257] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:18:45.992 2025] [ 2.280214] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:18:46.008 2025] [ 2.317227] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:18:46.008 2025] [ 2.334049] systemd[1]: Started Journal Service. [Fri Jan 03 14:18:46.008 2025] [ 2.376525] systemd-journald[194]: Received client request to flush runtime journal. [Fri Jan 03 14:18:46.165 2025] [ 2.707986] random: crng init done [Fri Jan 03 14:18:46.260 2025] [ 2.811101] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:18:46.275 2025] [ 2.811121] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:18:46.307 2025] [ 2.811140] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:18:46.322 2025] [ 2.811170] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:18:46.370 2025] [ 2.811189] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:18:46.385 2025] [ 2.823082] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:18:46.416 2025] [ 2.823102] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:18:46.416 2025] [ 2.823144] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:18:46.464 2025] [ 2.823172] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:18:46.479 2025] [ 2.823186] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:18:46.495 2025] [ 2.823190] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:18:46.495 2025] [ 2.823202] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:18:46.511 2025] [ 2.823214] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:18:46.542 2025] [ 2.823221] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:18:46.558 2025] [ 2.823225] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:18:46.589 2025] [ 2.823236] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:18:46.605 2025] [ 2.823247] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:18:46.620 2025] [ 2.838797] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:18:46.636 2025] [ 2.838814] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:18:46.636 2025] [ 2.838849] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:18:46.652 2025] [ 2.838852] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:18:46.668 2025] [ 2.838873] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:46.683 2025] [ 2.855183] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:18:46.683 2025] [ 2.856329] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:49:01 UTC (1681066141) [Fri Jan 03 14:18:46.699 2025] [ 2.866218] systemd-journald[194]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:18:46.715 2025] [ 2.866246] systemd-journald[194]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:18:46.746 2025] [ 2.903605] mc: Linux media interface: v0.10 [Fri Jan 03 14:18:46.747 2025] [ 2.926476] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:18:46.747 2025] [ 2.964168] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:18:46.762 2025] [ 2.964398] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:18:46.762 2025] [ 2.964477] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:18:46.778 2025] [ 2.965175] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:18:46.778 2025] [ 2.968598] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:18:46.793 2025] [ 2.968637] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:18:46.793 2025] [ 2.968675] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:18:46.809 2025] [ 2.968683] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:18:46.809 2025] [ 3.034307] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:18:46.809 2025] [ 3.034355] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:18:46.824 2025] [ 3.034361] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:18:46.848 2025] [ 3.034386] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:18:46.872 2025] [ 3.034423] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:18:46.903 2025] [ 3.034440] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:18:46.918 2025] [ 3.034446] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:18:46.918 2025] [ 3.204161] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:18:46.918 2025] [ 3.235572] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:18:46.948 2025] [ 3.235734] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:18:46.950 2025] [ 3.235906] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:18:46.966 2025] [ 3.239030] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:18:46.966 2025] [ 3.239107] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:18:46.981 2025] [ 3.251183] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:18:46.997 2025] [ 3.251223] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:18:47.013 2025] [ 3.254491] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:18:47.028 2025] [ 3.254556] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:18:47.028 2025] [ 3.254563] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:18:47.044 2025] [ 3.255153] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:18:47.048 2025] [ 3.260016] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:18:47.060 2025] [ 3.314140] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:18:47.060 2025] [ 3.314770] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:18:47.075 2025] [ 3.314800] Get kick_gpio number= (418) [Fri Jan 03 14:18:47.075 2025] [ 3.501316] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:18:47.091 2025] [ 3.501341] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:18:47.091 2025] [ 3.501356] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:18:47.107 2025] [ 3.501386] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:18:47.122 2025] [ 3.501400] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:18:47.122 2025] [ 3.501408] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:18:47.138 2025] [ 3.502208] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:18:47.185 2025] [ 3.723222] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:18:47.185 2025] [ 3.724393] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:18:47.327 2025] [ 3.876711] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:18:47.452 2025] [ 3.994334] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:18:47.452 2025] [ 3.994381] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:18:47.468 2025] [ 3.994583] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:18:47.484 2025] [ 3.994591] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:18:47.499 2025] [ 4.014147] xhci-hcd xhci-hcd.4.auto: irq 472, io mem 0x31100000 [Fri Jan 03 14:18:47.550 2025] [ 4.019354] hub 1-0:1.0: USB hub found [Fri Jan 03 14:18:47.562 2025] [ 4.019453] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:18:47.721 2025] [ 4.261069] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:18:47.890 2025] [ 4.430983] hub 1-1:1.0: USB hub found [Fri Jan 03 14:18:47.895 2025] [ 4.431174] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:18:48.385 2025] [ 4.926304] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:18:48.406 2025] [ 4.947262] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:18:48.419 2025] [ 4.949593] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:18:48.434 2025] [ 4.949628] cfg80211: failed to load regulatory.db [Fri Jan 03 14:18:48.541 2025] [ 5.080027] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:18:48.551 2025] [ 5.080068] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:18:48.703 2025] [ 5.244468] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:18:48.707 2025] [ 5.244512] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:48.797 2025] [ 5.338789] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:18:48.805 2025] [ 5.338837] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:48.844 2025] [ 5.386557] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:18:48.849 2025] [ 5.386593] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:48.879 2025] [ 5.420578] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:18:48.961 2025] [ 5.500823] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:18:48.967 2025] [ 5.506874] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:49.198 2025] [ 5.738867] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:18:49.239 2025] [ 5.781861] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:18:49.254 2025] [ 5.781898] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:18:49.434 2025] [ 5.973425] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:18:49.438 2025] [ 5.976590] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:18:49.676 2025] *************************************************************** [Fri Jan 03 14:18:49.682 2025] *************************************************************** [Fri Jan 03 14:18:49.691 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:18:49.693 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:18:49.697 2025] bash [Fri Jan 03 14:18:49.697 2025] cifs-utils [Fri Jan 03 14:18:49.702 2025] dosfstools [Fri Jan 03 14:18:49.702 2025] grub-common [Fri Jan 03 14:18:49.706 2025] grub-editenv [Fri Jan 03 14:18:49.706 2025] grub-efi [Fri Jan 03 14:18:49.706 2025] less [Fri Jan 03 14:18:49.706 2025] lib32-libgcc1 [Fri Jan 03 14:18:49.710 2025] lib32-libstdc++6 [Fri Jan 03 14:18:49.711 2025] libdw1 [Fri Jan 03 14:18:49.711 2025] libelf1 [Fri Jan 03 14:18:49.711 2025] libgcc1 [Fri Jan 03 14:18:49.711 2025] libgdbm-compat4 [Fri Jan 03 14:18:49.715 2025] libgdbm6 [Fri Jan 03 14:18:49.715 2025] libgmp10 [Fri Jan 03 14:18:49.715 2025] libidn2-0 [Fri Jan 03 14:18:49.719 2025] libreadline8 [Fri Jan 03 14:18:49.719 2025] libstdc++6 [Fri Jan 03 14:18:49.719 2025] libunistring2 [Fri Jan 03 14:18:49.719 2025] libvte-2.91-0 [Fri Jan 03 14:18:49.724 2025] nettle [Fri Jan 03 14:18:49.724 2025] onboard [Fri Jan 03 14:18:49.724 2025] parted [Fri Jan 03 14:18:49.724 2025] rxvt-unicode [Fri Jan 03 14:18:49.728 2025] [Fri Jan 03 14:18:49.728 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:18:49.733 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:18:49.737 2025] the opkg remove command. i.e.: [Fri Jan 03 14:18:49.742 2025] opkg remove [Fri Jan 03 14:18:49.742 2025] Where is the name printed in the list above [Fri Jan 03 14:18:49.747 2025] [Fri Jan 03 14:18:49.747 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:18:49.751 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:18:49.757 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:18:49.763 2025] also remove the dependent packages as well [Fri Jan 03 14:18:49.768 2025] *************************************************************** [Fri Jan 03 14:18:49.773 2025] *************************************************************** [Fri Jan 03 14:18:55.127 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:18:55.127 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:18:55.190 2025] [Fri Jan 03 14:18:55.190 2025] _____ _____ _ _ [Fri Jan 03 14:18:55.190 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:18:55.205 2025] | | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:18:55.205 2025] |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:18:55.205 2025] |___| |___| [Fri Jan 03 14:18:55.221 2025] [Fri Jan 03 14:18:55.221 2025] Arago Project am62xx-evm - [Fri Jan 03 14:18:55.221 2025] [Fri Jan 03 14:18:55.221 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:18:55.221 2025] [Fri Jan 03 14:18:55.221 2025] am62xx-evm login: WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:18:55.331 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:18:55.505 2025] [ 12.054195] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:55.505 2025] [ 12.054218] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:55.520 2025] [ 12.054242] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.520 2025] [ 12.054295] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:55.535 2025] [ 12.054300] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:55.535 2025] [ 12.054312] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.535 2025] [ 12.054349] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:55.551 2025] [ 12.054354] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:55.551 2025] [ 12.054361] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.567 2025] [ 12.054396] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:55.573 2025] [ 12.054401] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:55.573 2025] [ 12.054408] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.585 2025] [ 12.054441] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:55.585 2025] [ 12.054446] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:55.585 2025] [ 12.054457] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.600 2025] [ 12.054491] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:55.600 2025] [ 12.054497] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:55.616 2025] [ 12.054503] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.616 2025] [ 12.054540] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:55.616 2025] [ 12.054545] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:55.632 2025] [ 12.054552] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:55.632 2025] [ 12.054586] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:55.647 2025] [ 12.054591] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:55.647 2025] [ 12.054602] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.822 2025] [ 14.363017] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:18:57.828 2025] [ 14.363039] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:18:57.834 2025] [ 14.363056] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.840 2025] [ 14.363106] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:18:57.846 2025] [ 14.363111] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:18:57.852 2025] [ 14.363118] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.858 2025] [ 14.363152] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:18:57.864 2025] [ 14.363159] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:18:57.870 2025] [ 14.363165] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.876 2025] [ 14.363198] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:18:57.881 2025] [ 14.363203] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:18:57.888 2025] [ 14.363210] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.897 2025] [ 14.363245] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:18:57.900 2025] [ 14.363250] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:18:57.906 2025] [ 14.363258] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.912 2025] [ 14.363290] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:18:57.918 2025] [ 14.363294] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:18:57.924 2025] [ 14.363304] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.931 2025] [ 14.363336] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:18:57.937 2025] [ 14.363341] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:18:57.946 2025] [ 14.363347] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:57.949 2025] [ 14.363384] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:18:57.955 2025] [ 14.363389] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:18:57.962 2025] [ 14.363396] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:18:58.310 2025] [ 14.852343] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:19:01.627 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:19:01.632 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:19:03.436 2025] [ 19.977107] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:03.441 2025] [ 19.977131] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:03.447 2025] [ 19.977151] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.454 2025] [ 19.977203] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:03.460 2025] [ 19.977208] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:03.466 2025] [ 19.977216] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.472 2025] [ 19.977252] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:03.478 2025] [ 19.977257] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:03.483 2025] [ 19.977264] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.493 2025] [ 19.977298] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:03.497 2025] [ 19.977306] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:03.503 2025] [ 19.977313] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.509 2025] [ 19.977347] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:03.515 2025] [ 19.977352] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:03.521 2025] [ 19.977360] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.526 2025] [ 19.977395] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:03.537 2025] [ 19.977400] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:03.540 2025] [ 19.977407] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.545 2025] [ 19.977442] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:03.556 2025] [ 19.977450] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:03.562 2025] [ 19.977457] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.568 2025] [ 19.977491] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:03.574 2025] [ 19.977496] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:03.580 2025] [ 19.977503] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.585 2025] [ 20.056605] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:03.585 2025] [ 20.056630] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:03.596 2025] [ 20.056650] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.600 2025] [ 20.056708] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:03.600 2025] [ 20.056713] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:03.615 2025] [ 20.056721] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.615 2025] [ 20.056756] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:03.615 2025] [ 20.056762] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:03.631 2025] [ 20.056771] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.631 2025] [ 20.056805] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:03.647 2025] [ 20.056810] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:03.647 2025] [ 20.056818] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.647 2025] [ 20.056854] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:03.662 2025] [ 20.056859] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:03.662 2025] [ 20.056866] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.678 2025] [ 20.056899] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:03.678 2025] [ 20.056904] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:03.678 2025] [ 20.056911] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.696 2025] [ 20.057110] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:03.696 2025] [ 20.057119] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:03.696 2025] [ 20.057128] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:03.710 2025] [ 20.057164] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:03.710 2025] [ 20.057169] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:03.725 2025] [ 20.057176] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:36.124 2025] [Fri Jan 03 14:19:36.124 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:19:36.145 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:19:36.196 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:19:36.217 2025] Trying to boot from MMC1 [Fri Jan 03 14:19:36.386 2025] Authentication passed [Fri Jan 03 14:19:36.391 2025] Authentication passed [Fri Jan 03 14:19:36.395 2025] Authentication passed [Fri Jan 03 14:19:36.431 2025] Authentication passed [Fri Jan 03 14:19:36.437 2025] Authentication passed [Fri Jan 03 14:19:36.444 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:19:36.444 2025] [Fri Jan 03 14:19:36.448 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:19:36.451 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:19:36.753 2025] [Fri Jan 03 14:19:36.753 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:19:36.758 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:19:36.800 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:19:36.805 2025] Error: could not access storage. [Fri Jan 03 14:19:36.806 2025] Trying to boot from MMC1 [Fri Jan 03 14:19:36.963 2025] Authentication passed [Fri Jan 03 14:19:36.969 2025] Authentication passed [Fri Jan 03 14:19:37.615 2025] [Fri Jan 03 14:19:37.615 2025] [Fri Jan 03 14:19:37.615 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:19:37.630 2025] [Fri Jan 03 14:19:37.630 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:19:37.630 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:19:37.630 2025] DRAM: 2 GiB [Fri Jan 03 14:19:37.866 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:19:37.866 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:19:37.887 2025] Loading Environment from MMC... OK [Fri Jan 03 14:19:38.087 2025] In: serial [Fri Jan 03 14:19:38.087 2025] Out: serial [Fri Jan 03 14:19:38.087 2025] Err: serial [Fri Jan 03 14:19:38.087 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:19:38.102 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:19:38.260 2025] switch to partitions #0, OK [Fri Jan 03 14:19:38.260 2025] mmc0(part 0) is current device [Fri Jan 03 14:19:38.406 2025] SD/MMC found on device 0 [Fri Jan 03 14:19:38.406 2025] Running eMMC boot ... [Fri Jan 03 14:19:38.421 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:19:38.421 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:19:38.437 2025] Importing environment from mmc0 ... [Fri Jan 03 14:19:38.657 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:19:38.673 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:19:38.673 2025] Working FDT set to 88000000 [Fri Jan 03 14:19:38.689 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:19:38.689 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:19:38.689 2025] Working FDT set to 88000000 [Fri Jan 03 14:19:38.720 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:19:38.720 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:19:38.736 2025] Working FDT set to 8feed000 [Fri Jan 03 14:19:38.736 2025] [Fri Jan 03 14:19:38.736 2025] Starting kernel ... [Fri Jan 03 14:19:38.751 2025] [Fri Jan 03 14:19:38.783 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:19:38.789 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:19:38.799 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:19:38.814 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:19:38.909 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:19:38.909 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:19:38.909 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:19:38.909 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:19:38.925 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:19:38.925 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:19:38.940 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:19:38.956 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:19:38.956 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:19:38.972 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:19:38.972 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:19:38.990 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:19:38.990 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:19:39.003 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:19:39.003 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:19:39.019 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:19:39.019 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:19:39.019 2025] [ 0.000000] Normal empty [Fri Jan 03 14:19:39.019 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:19:39.034 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:19:39.034 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:19:39.034 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:19:39.050 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:19:39.050 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:19:39.066 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:19:39.066 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:19:39.066 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:19:39.081 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:19:39.090 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:19:39.097 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:19:39.097 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:19:39.097 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:19:39.113 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:19:39.113 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:19:39.113 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:19:39.129 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:19:39.129 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:19:39.129 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:19:39.144 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:19:39.144 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:19:39.144 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:19:39.160 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:19:39.160 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:19:39.207 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:19:39.223 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:19:39.223 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:19:39.238 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:19:39.238 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:19:39.270 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:19:39.270 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:19:39.270 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:19:39.270 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:19:39.290 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:19:39.290 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:19:39.301 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:19:39.301 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:19:39.301 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:19:39.317 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:19:39.317 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:19:39.333 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:19:39.333 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:19:39.333 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:19:39.333 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:19:39.348 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:19:39.348 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:19:39.364 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:19:39.364 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:19:39.364 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:19:39.379 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:19:39.390 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:19:39.396 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:19:39.396 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:19:39.411 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:19:39.411 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:19:39.427 2025] [ 0.000248] Console: colour dummy device 80x25 [Fri Jan 03 14:19:39.427 2025] [ 0.528878] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:19:39.442 2025] [ 0.528887] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:19:39.442 2025] [ 0.528972] LSM: Security Framework initializing [Fri Jan 03 14:19:39.458 2025] [ 0.529111] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:19:39.458 2025] [ 0.529135] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:19:39.458 2025] [ 0.530833] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:19:39.474 2025] [ 0.530841] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:19:39.474 2025] [ 0.530885] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:19:39.491 2025] [ 0.583347] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:19:39.491 2025] [ 0.583586] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:19:39.491 2025] [ 0.583676] EFI services will not be available. [Fri Jan 03 14:19:39.505 2025] [ 0.583935] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:19:39.505 2025] [ 0.584707] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:19:39.521 2025] [ 0.584821] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:19:39.521 2025] [ 0.584838] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:19:39.521 2025] [ 0.584892] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:19:39.537 2025] [ 0.634978] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:19:39.537 2025] [ 0.635067] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:19:39.552 2025] [ 0.635080] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:19:39.552 2025] [ 0.635110] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:19:39.568 2025] [ 0.660998] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:19:39.568 2025] [ 0.661078] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:19:39.568 2025] [ 0.661092] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:19:39.586 2025] [ 0.661122] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:19:39.592 2025] [ 0.661182] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:19:39.597 2025] [ 0.661188] SMP: Total of 4 processors activated. [Fri Jan 03 14:19:39.602 2025] [ 0.661191] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:19:39.608 2025] [ 0.700619] CPU features: detected: CRC32 instructions [Fri Jan 03 14:19:39.613 2025] [ 0.700664] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:19:39.618 2025] [ 0.700667] alternatives: applying system-wide alternatives [Fri Jan 03 14:19:39.624 2025] [ 0.702185] devtmpfs: initialized [Fri Jan 03 14:19:39.629 2025] [ 0.713798] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:19:39.635 2025] [ 0.713825] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:19:39.642 2025] [ 0.718980] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:19:39.648 2025] [ 0.719803] DMI not present or invalid. [Fri Jan 03 14:19:39.653 2025] [ 0.720336] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:19:39.659 2025] [ 0.741305] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:19:39.664 2025] [ 0.741597] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:19:39.673 2025] [ 0.741788] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:19:39.681 2025] [ 0.741877] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:19:39.686 2025] [ 0.742035] audit: type=2000 audit(0.739:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:19:39.694 2025] [ 0.742667] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:19:39.704 2025] [ 0.742671] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:19:39.707 2025] [ 0.742923] ASID allocator initialised with 65536 entries [Fri Jan 03 14:19:39.713 2025] [ 0.757835] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:19:39.720 2025] [ 0.766934] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:19:39.727 2025] [ 0.766946] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:19:39.732 2025] [ 0.766950] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:19:39.739 2025] [ 0.766952] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:19:39.749 2025] [ 0.766956] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:19:39.753 2025] [ 0.766959] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:19:39.760 2025] [ 0.766962] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:19:39.767 2025] [ 0.766965] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:19:39.773 2025] [ 0.768159] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:19:39.781 2025] [ 0.768632] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:19:39.789 2025] [ 0.768640] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:19:39.796 2025] [ 0.768652] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:19:39.805 2025] [ 0.768668] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:19:39.812 2025] [ 0.768678] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:19:39.826 2025] [ 0.768684] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:19:39.828 2025] [ 0.768921] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:19:39.834 2025] [ 0.768925] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:19:39.842 2025] [ 0.768938] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:19:39.850 2025] [ 0.768951] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:19:39.859 2025] [ 0.768959] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:19:39.867 2025] [ 0.768963] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:19:39.877 2025] [ 0.769219] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:19:39.881 2025] [ 0.769224] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:19:39.888 2025] [ 0.769234] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:19:39.896 2025] [ 0.769246] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:19:39.905 2025] [ 0.769254] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:19:39.912 2025] [ 0.769258] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:19:39.918 2025] [ 0.769466] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [Fri Jan 03 14:19:39.926 2025] [ 0.769470] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [Fri Jan 03 14:19:39.933 2025] [ 0.769479] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [Fri Jan 03 14:19:39.942 2025] [ 0.769491] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [Fri Jan 03 14:19:39.950 2025] [ 0.769500] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [Fri Jan 03 14:19:39.957 2025] [ 1.05[2498] printk: console [ttyS2] printing thread started [Fri Jan 03 14:19:39.963 2025] 0.769504] reg-fixed-voltage regulator-3: No GPIO consumer (null) found [Fri Jan 03 14:19:39.973 2025] [ 1.052520] printk: console [ttyS2] enabled [Fri Jan 03 14:19:39.975 2025] [ 1.052524] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:19:39.980 2025] [ 1.064911] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:19:39.988 2025] [ 1.066095] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:19:39.994 2025] [ 1.066106] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:19:40.003 2025] [ 1.066118] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:19:40.010 2025] [ 1.066136] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:19:40.019 2025] [ 1.066148] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.026 2025] [ 1.066152] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:19:40.033 2025] [ 1.066216] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:19:40.041 2025] [ 1.067123] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:19:40.047 2025] [ 1.067131] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:19:40.055 2025] [ 1.067147] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:19:40.068 2025] [ 1.067188] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:19:40.072 2025] [ 1.067200] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.078 2025] [ 1.067205] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:19:40.085 2025] [ 1.070239] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:19:40.092 2025] [ 1.076716] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:19:40.099 2025] [ 1.083386] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:19:40.105 2025] [ 1.083819] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:19:40.111 2025] [ 1.083826] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:19:40.118 2025] [ 1.083840] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:19:40.128 2025] [ 1.083859] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:19:40.140 2025] [ 1.083873] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.146 2025] [ 1.083878] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:19:40.152 2025] [ 1.117181] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:19:40.159 2025] [ 1.117472] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:19:40.165 2025] [ 1.118311] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:19:40.172 2025] [ 1.118318] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:19:40.179 2025] [ 1.118330] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:19:40.195 2025] [ 1.118359] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:19:40.203 2025] [ 1.118374] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.213 2025] [ 1.118379] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:19:40.216 2025] [ 1.119201] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:19:40.224 2025] [ 1.119253] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:19:40.236 2025] [ 1.119504] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:19:40.244 2025] [ 1.119518] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:19:40.251 2025] [ 1.119523] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:19:40.258 2025] [ 1.120352] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:19:40.266 2025] [ 1.136684] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:19:40.272 2025] [ 1.141499] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:19:40.278 2025] [ 1.141499] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:19:40.284 2025] [ 1.141514] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:19:40.291 2025] [ 1.141514] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:19:40.297 2025] [ 1.141534] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:19:40.307 2025] [ 1.141531] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:19:40.315 2025] [ 1.141555] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:19:40.326 2025] [ 1.141557] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:19:40.335 2025] [ 1.141567] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.343 2025] [ 1.141567] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.349 2025] [ 1.141571] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:19:40.358 2025] [ 1.141571] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:19:40.360 2025] [ 1.141577] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:19:40.371 2025] [ 1.141580] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:19:40.374 2025] [ 1.141580] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:19:40.381 2025] [ 1.141590] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:19:40.396 2025] [ 1.141605] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:19:40.402 2025] [ 1.141613] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.413 2025] [ 1.141617] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:19:40.416 2025] [ 1.142487] mmc1: CQHCI version 5.10 [Fri Jan 03 14:19:40.421 2025] [ 1.143140] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:19:40.426 2025] [ 1.143153] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:19:40.433 2025] [ 1.143196] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:19:40.441 2025] [ 1.143215] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:19:40.450 2025] [ 1.143227] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.458 2025] [ 1.143233] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:19:40.463 2025] [ 1.143747] mmc2: CQHCI version 5.10 [Fri Jan 03 14:19:40.468 2025] [ 1.144553] mmc0: CQHCI version 5.10 [Fri Jan 03 14:19:40.474 2025] [ 1.145340] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:19:40.480 2025] [ 1.147788] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:19:40.489 2025] [ 1.150777] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:19:40.500 2025] [ 1.150981] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:19:40.511 2025] [ 1.151049] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:19:40.514 2025] [ 1.154109] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:19:40.520 2025] [ 1.154334] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:19:40.527 2025] [ 1.154402] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:19:40.532 2025] [ 1.156027] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:19:40.539 2025] [ 1.156036] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:19:40.546 2025] [ 1.156057] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:19:40.554 2025] [ 1.156073] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:19:40.561 2025] [ 1.156092] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:19:40.571 2025] [ 1.156096] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:19:40.574 2025] [ 1.156105] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:19:40.582 2025] [ 1.156116] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:19:40.593 2025] [ 1.156126] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:19:40.601 2025] [ 1.156130] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:19:40.608 2025] [ 1.156578] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:19:40.614 2025] [ 1.156583] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:19:40.619 2025] [ 1.156599] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:19:40.628 2025] [ 1.156610] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:19:40.634 2025] [ 1.156614] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:19:40.644 2025] [ 1.157094] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:19:40.649 2025] [ 1.157110] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:19:40.655 2025] [ 1.157113] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:19:40.661 2025] [ 1.157225] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:19:40.669 2025] [ 1.157237] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:19:40.675 2025] [ 1.157240] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:19:40.680 2025] [ 1.157301] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:19:40.689 2025] [ 1.157311] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:40.696 2025] [ 1.157317] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:19:40.701 2025] [ 1.157979] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:19:40.707 2025] [ 1.160640] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:19:40.718 2025] [ 1.173190] ALSA device list: [Fri Jan 03 14:19:40.722 2025] [ 1.173203] No soundcards found. [Fri Jan 03 14:19:40.724 2025] [ 1.180986] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:19:40.730 2025] [ 1.183196] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:19:40.736 2025] [ 1.188096] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:19:40.743 2025] [ 1.223238] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:19:40.751 2025] [ 1.234224] mmc1: new MMC card at address 0001 [Fri Jan 03 14:19:40.756 2025] [ 1.235050] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:19:40.761 2025] [ 1.243065] mmcblk1: p1 [Fri Jan 03 14:19:40.766 2025] [ 1.243954] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:19:40.771 2025] [ 1.245758] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:19:40.777 2025] [ 1.247078] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:19:40.782 2025] [ 1.319316] mmc0: Command Queue Engine enabled [Fri Jan 03 14:19:40.786 2025] [ 1.319335] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:19:40.792 2025] [ 1.320059] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:19:40.796 2025] [ 1.323963] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:19:40.800 2025] [ 1.325032] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:19:40.805 2025] [ 1.326382] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:19:40.810 2025] [ 1.327521] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:19:40.815 2025] [ 1.343774] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:19:40.820 2025] [ 1.344150] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:40.828 2025] [ 1.344256] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:19:40.833 2025] [ 1.344405] devtmpfs: mounted [Fri Jan 03 14:19:40.838 2025] [ 1.345831] Freeing unused kernel memory: 1856K [Fri Jan 03 14:19:40.843 2025] [ 1.351258] Run /sbin/init as init process [Fri Jan 03 14:19:40.847 2025] [ 1.351263] with arguments: [Fri Jan 03 14:19:40.851 2025] [ 1.351264] /sbin/init [Fri Jan 03 14:19:40.852 2025] [ 1.351266] with environment: [Fri Jan 03 14:19:40.856 2025] [ 1.351268] HOME=/ [Fri Jan 03 14:19:40.861 2025] [ 1.351270] TERM=linux [Fri Jan 03 14:19:40.861 2025] [ 1.351271] syntec_extend= [Fri Jan 03 14:19:40.865 2025] [ 1.442136] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:19:40.870 2025] [ 1.469432] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:19:40.876 2025] [ 1.470708] Segment Routing with IPv6 [Fri Jan 03 14:19:40.876 2025] [ 1.470744] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:19:40.881 2025] [ 1.486760] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:19:40.911 2025] [ 1.487347] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:19:40.918 2025] [ 1.490545] systemd[1]: Hostname set to . [Fri Jan 03 14:19:40.924 2025] [ 1.612351] systemd-sysv-generator[183]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:19:40.945 2025] [ 1.922096] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:19:40.964 2025] [ 1.924906] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:19:40.981 2025] [ 1.988298] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:19:40.988 2025] [ 1.991650] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:19:40.994 2025] [ 1.993212] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:19:41.001 2025] [ 1.993713] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:19:41.007 2025] [ 1.994059] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:19:41.013 2025] [ 1.994282] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:19:41.020 2025] [ 1.994693] systemd[1]: Reached target Path Units. [Fri Jan 03 14:19:41.026 2025] [ 1.994781] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:19:41.032 2025] [ 1.994838] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:19:41.037 2025] [ 1.994918] systemd[1]: Reached target Swaps. [Fri Jan 03 14:19:41.043 2025] [ 1.999101] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:19:41.049 2025] [ 1.999287] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:19:41.053 2025] [ 2.005345] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:19:41.059 2025] [ 2.005868] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:19:41.068 2025] [ 2.006770] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:19:41.074 2025] [ 2.007376] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:19:41.081 2025] [ 2.007939] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:19:41.088 2025] [ 2.008741] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:19:41.102 2025] [ 2.010588] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:19:41.106 2025] [ 2.011105] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:19:41.112 2025] [ 2.011651] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:19:41.124 2025] [ 2.083873] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:19:41.127 2025] [ 2.087939] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:19:41.138 2025] [ 2.092269] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:19:41.145 2025] [ 2.093119] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:19:41.157 2025] [ 2.094468] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:19:41.166 2025] [ 2.098435] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:19:41.172 2025] [ 2.104668] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:19:41.176 2025] [ 2.110313] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:19:41.182 2025] [ 2.115695] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:19:41.193 2025] [ 2.120543] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:19:41.194 2025] [ 2.127285] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:19:41.203 2025] [ 2.127802] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:19:41.209 2025] [ 2.129709] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:19:41.225 2025] [ 2.129740] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:19:41.230 2025] [ 2.133713] fuse: init (API version 7.37) [Fri Jan 03 14:19:41.235 2025] [ 2.134481] systemd[1]: Starting Journal Service... [Fri Jan 03 14:19:41.241 2025] [ 2.142100] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:19:41.246 2025] [ 2.147044] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:19:41.253 2025] [ 2.153519] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:19:41.259 2025] [ 2.163513] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:19:41.265 2025] [ 2.175115] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:19:41.275 2025] [ 2.207852] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:19:41.277 2025] [ 2.209398] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:19:41.284 2025] [ 2.212266] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:19:41.289 2025] [ 2.220147] systemd[1]: Started RPC Bind. [Fri Jan 03 14:19:41.294 2025] [ 2.221125] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:19:41.300 2025] [ 2.221881] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:19:41.306 2025] [ 2.222559] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:19:41.312 2025] [ 2.223051] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:19:41.317 2025] [ 2.225494] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:19:41.322 2025] [ 2.226821] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:19:41.332 2025] [ 2.227514] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:19:41.333 2025] [ 2.228811] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:19:41.340 2025] [ 2.229592] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:19:41.346 2025] [ 2.231071] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:19:41.352 2025] [ 2.231760] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:19:41.358 2025] [ 2.232917] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:19:41.367 2025] [ 2.234062] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:19:41.370 2025] [ 2.235621] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:19:41.381 2025] [ 2.273309] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:19:41.383 2025] [ 2.280299] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:19:41.389 2025] [ 2.285865] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:19:41.404 2025] [ 2.286373] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:19:41.418 2025] [ 2.297863] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:19:41.425 2025] [ 2.298465] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:19:41.436 2025] [ 2.304269] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:19:41.444 2025] [ 2.309267] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:19:41.446 2025] [ 2.310006] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:19:41.451 2025] [ 2.310653] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:19:41.458 2025] [ 2.327660] systemd[1]: Started Journal Service. [Fri Jan 03 14:19:41.463 2025] [ 2.364004] systemd-journald[194]: Received client request to flush runtime journal. [Fri Jan 03 14:19:41.662 2025] [ 2.765228] random: crng init done [Fri Jan 03 14:19:41.771 2025] [ 2.866389] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:19:41.771 2025] [ 2.866411] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:19:41.803 2025] [ 2.866431] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:19:41.819 2025] [ 2.866481] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:19:41.834 2025] [ 2.866506] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:19:41.834 2025] [ 2.868860] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:19:41.834 2025] [ 2.868879] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:19:41.865 2025] [ 2.868910] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:19:41.928 2025] [ 2.868933] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:19:41.944 2025] [ 2.868945] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:19:41.944 2025] [ 2.868949] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:19:41.960 2025] [ 2.868962] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:19:41.960 2025] [ 2.868974] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:19:42.007 2025] [ 2.868981] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:19:42.023 2025] [ 2.868984] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:19:42.023 2025] [ 2.868994] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:19:42.038 2025] [ 2.869005] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:19:42.038 2025] [ 2.890075] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:19:42.054 2025] [ 2.890095] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:19:42.054 2025] [ 2.890130] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:19:42.054 2025] [ 2.890133] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:19:42.085 2025] [ 2.890153] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:42.085 2025] [ 2.970781] mc: Linux media interface: v0.10 [Fri Jan 03 14:19:42.094 2025] [ 2.999565] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:19:42.101 2025] [ 3.001504] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:49:57 UTC (1681066197) [Fri Jan 03 14:19:42.101 2025] [ 3.003204] systemd-journald[194]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:19:42.117 2025] [ 3.003239] systemd-journald[194]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:19:42.148 2025] [ 3.007080] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:19:42.148 2025] [ 3.104860] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:19:42.148 2025] [ 3.105236] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:19:42.164 2025] [ 3.105928] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:19:42.164 2025] [ 3.106357] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:19:42.179 2025] [ 3.107933] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:19:42.195 2025] [ 3.107972] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:19:42.195 2025] [ 3.108010] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:19:42.211 2025] [ 3.108022] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:19:42.211 2025] [ 3.292150] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:19:42.227 2025] [ 3.293514] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:19:42.227 2025] [ 3.293550] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:19:42.227 2025] [ 3.293556] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:19:42.242 2025] [ 3.293579] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:19:42.242 2025] [ 3.293604] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:19:42.258 2025] [ 3.293621] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:19:42.273 2025] [ 3.293626] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:19:42.273 2025] [ 3.307671] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:19:42.289 2025] [ 3.307842] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:19:42.295 2025] [ 3.308041] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:19:42.305 2025] [ 3.308536] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:19:42.305 2025] [ 3.308646] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:19:42.321 2025] [ 3.321877] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:19:42.321 2025] [ 3.321919] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:19:42.336 2025] [ 3.322817] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:19:42.336 2025] [ 3.322855] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:19:42.336 2025] [ 3.322862] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:19:42.352 2025] [ 3.330436] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:19:42.352 2025] [ 3.331391] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:19:42.368 2025] [ 3.343899] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:19:42.383 2025] [ 3.344528] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:19:42.383 2025] [ 3.344555] Get kick_gpio number= (418) [Fri Jan 03 14:19:43.264 2025] [ 4.360139] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:19:43.280 2025] [ 4.370353] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:19:43.298 2025] [ 4.370409] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:19:43.311 2025] [ 4.370448] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:19:43.327 2025] [ 4.370469] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:19:43.421 2025] [ 4.370476] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:19:43.453 2025] [ 4.370750] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:19:43.484 2025] [ 4.461723] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:19:43.516 2025] [ 4.481865] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:19:43.547 2025] [ 4.494681] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:19:43.562 2025] [ 4.593192] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:19:43.562 2025] [ 4.594105] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:19:43.613 2025] [ 4.594136] cfg80211: failed to load regulatory.db [Fri Jan 03 14:19:43.622 2025] [ 4.703416] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:19:43.658 2025] [ 4.751259] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:19:43.663 2025] [ 4.751325] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:19:43.681 2025] [ 4.751536] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:19:43.689 2025] [ 4.751547] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:19:43.706 2025] [ 4.757685] xhci-hcd xhci-hcd.4.auto: irq 465, io mem 0x31100000 [Fri Jan 03 14:19:43.708 2025] [ 4.760550] hub 1-0:1.0: USB hub found [Fri Jan 03 14:19:43.713 2025] [ 4.760651] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:19:43.756 2025] [ 4.849089] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:19:43.763 2025] [ 4.849126] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:19:43.903 2025] [ 4.996276] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:19:44.082 2025] [ 5.174463] hub 1-1:1.0: USB hub found [Fri Jan 03 14:19:44.085 2025] [ 5.174625] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:19:44.337 2025] [ 5.429673] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:19:44.341 2025] [ 5.429806] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:44.359 2025] [ 5.452126] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:19:44.368 2025] [ 5.452227] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:44.407 2025] [ 5.500372] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:19:44.412 2025] [ 5.500445] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:44.544 2025] [ 5.637110] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:19:44.588 2025] [ 5.678289] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:19:44.601 2025] [ 5.678321] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:19:44.728 2025] [ 5.820350] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:19:44.801 2025] [ 5.894857] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:19:44.805 2025] [ 5.895513] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:45.212 2025] [ 6.304772] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:19:45.216 2025] [ 6.305959] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:19:45.312 2025] *************************************************************** [Fri Jan 03 14:19:45.316 2025] *************************************************************** [Fri Jan 03 14:19:45.323 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:19:45.329 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:19:45.334 2025] bash [Fri Jan 03 14:19:45.334 2025] cifs-utils [Fri Jan 03 14:19:45.334 2025] dosfstools [Fri Jan 03 14:19:45.335 2025] grub-common [Fri Jan 03 14:19:45.339 2025] grub-editenv [Fri Jan 03 14:19:45.340 2025] grub-efi [Fri Jan 03 14:19:45.340 2025] less [Fri Jan 03 14:19:45.340 2025] lib32-libgcc1 [Fri Jan 03 14:19:45.340 2025] lib32-libstdc++6 [Fri Jan 03 14:19:45.344 2025] libdw1 [Fri Jan 03 14:19:45.344 2025] libelf1 [Fri Jan 03 14:19:45.348 2025] libgcc1 [Fri Jan 03 14:19:45.348 2025] libgdbm-compat4 [Fri Jan 03 14:19:45.349 2025] libgdbm6 [Fri Jan 03 14:19:45.349 2025] libgmp10 [Fri Jan 03 14:19:45.353 2025] libidn2-0 [Fri Jan 03 14:19:45.353 2025] libreadline8 [Fri Jan 03 14:19:45.353 2025] libstdc++6 [Fri Jan 03 14:19:45.357 2025] libunistring2 [Fri Jan 03 14:19:45.358 2025] libvte-2.91-0 [Fri Jan 03 14:19:45.358 2025] nettle [Fri Jan 03 14:19:45.358 2025] onboard [Fri Jan 03 14:19:45.362 2025] parted [Fri Jan 03 14:19:45.362 2025] rxvt-unicode [Fri Jan 03 14:19:45.362 2025] [Fri Jan 03 14:19:45.362 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:19:45.366 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:19:45.373 2025] the opkg remove command. i.e.: [Fri Jan 03 14:19:45.373 2025] opkg remove [Fri Jan 03 14:19:45.381 2025] Where is the name printed in the list above [Fri Jan 03 14:19:45.382 2025] [Fri Jan 03 14:19:45.382 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:19:45.387 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:19:45.393 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:19:45.399 2025] also remove the dependent packages as well [Fri Jan 03 14:19:45.404 2025] *************************************************************** [Fri Jan 03 14:19:45.409 2025] *************************************************************** [Fri Jan 03 14:19:50.240 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:19:50.247 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:19:50.431 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:19:50.438 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:19:50.615 2025] [ 11.706098] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:50.619 2025] [ 11.706122] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:50.624 2025] [ 11.706146] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.630 2025] [ 11.706391] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:50.641 2025] [ 11.706401] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:50.652 2025] [ 11.706413] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.655 2025] [ 11.706465] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:50.661 2025] [ 11.706470] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:50.667 2025] [ 11.706478] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.674 2025] [ 11.706520] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:50.680 2025] [ 11.706525] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:50.689 2025] [ 11.706532] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.695 2025] [ 11.706569] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:50.697 2025] [ 11.706575] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:50.704 2025] [ 11.706582] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.710 2025] [ 11.706619] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:50.716 2025] [ 11.706623] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:50.726 2025] [ 11.706630] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.729 2025] [ 11.706667] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:50.735 2025] [Fri Jan 03 14:19:50.735 2025] [ 11.706672] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:50.745 2025] _____ _____ _ _ [ 11.706679] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.756 2025] [Fri Jan 03 14:19:50.757 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:19:50.762 2025] | [ 11.706714] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:50.767 2025] | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:19:50.773 2025] |__|__|_| [ 11.706720] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:50.778 2025] |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:19:50.783 2025] |_[ 11.706728] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:50.788 2025] __| |___| [Fri Jan 03 14:19:50.793 2025] [Fri Jan 03 14:19:50.793 2025] Arago Project am62xx-evm - [Fri Jan 03 14:19:50.797 2025] [Fri Jan 03 14:19:50.797 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:19:50.802 2025] [Fri Jan 03 14:19:50.802 2025] am62xx-evm login: [ 14.004434] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:52.917 2025] [ 14.004461] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:52.922 2025] [ 14.004476] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:52.928 2025] [ 14.004524] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:52.934 2025] [ 14.004529] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:52.940 2025] [ 14.004537] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:52.946 2025] [ 14.004571] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:52.953 2025] [ 14.004576] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:52.960 2025] [ 14.004582] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:52.966 2025] [ 14.004617] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:52.973 2025] [ 14.004622] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:52.978 2025] [ 14.004629] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:52.985 2025] [ 14.004661] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:52.991 2025] [ 14.004666] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:52.996 2025] [ 14.004672] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:53.002 2025] [ 14.004709] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:53.009 2025] [ 14.004714] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:53.014 2025] [ 14.004720] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:53.020 2025] [ 14.004757] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:53.025 2025] [ 14.004762] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:53.031 2025] [ 14.004769] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:53.038 2025] [ 14.004802] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:53.049 2025] [ 14.004807] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:53.054 2025] [ 14.004814] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:53.547 2025] [ 14.640187] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:19:56.848 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:19:56.856 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:19:58.658 2025] [ 19.752019] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:58.663 2025] [ 19.752044] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:58.670 2025] [ 19.752068] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.676 2025] [ 19.752119] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:58.682 2025] [ 19.752124] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:58.688 2025] [ 19.752131] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.694 2025] [ 19.752248] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:58.700 2025] [ 19.752255] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:58.707 2025] [ 19.752264] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.712 2025] [ 19.752308] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:58.722 2025] [ 19.752313] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:58.724 2025] [ 19.752320] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.730 2025] [ 19.752356] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:58.738 2025] [ 19.752361] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:58.743 2025] [ 19.752371] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.749 2025] [ 19.752404] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:58.756 2025] [ 19.752409] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:58.761 2025] [ 19.752416] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.771 2025] [ 19.752453] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:58.777 2025] [ 19.752458] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:58.780 2025] [ 19.752465] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.787 2025] [ 19.752503] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:58.792 2025] [ 19.752508] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:58.798 2025] [ 19.752515] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.804 2025] [ 19.838203] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:19:58.810 2025] [ 19.838244] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:19:58.816 2025] [ 19.838267] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.822 2025] [ 19.838377] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:19:58.828 2025] [ 19.838383] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:19:58.835 2025] [ 19.838392] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.841 2025] [ 19.838449] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:19:58.847 2025] [ 19.838454] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:19:58.855 2025] [ 19.838461] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.860 2025] [ 19.838526] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:19:58.868 2025] [ 19.838532] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:19:58.874 2025] [ 19.838555] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.879 2025] [ 19.838598] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:19:58.885 2025] [ 19.838618] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:19:58.891 2025] [ 19.838626] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.899 2025] [ 19.838664] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:19:58.903 2025] [ 19.838687] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:19:58.909 2025] [ 19.838695] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.915 2025] [ 19.838749] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:19:58.922 2025] [ 19.838754] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:19:58.927 2025] [ 19.838761] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:19:58.933 2025] [ 19.838811] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:19:58.939 2025] [ 19.838821] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:19:58.949 2025] [ 19.838828] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:31.362 2025] [Fri Jan 03 14:20:31.362 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:20:31.382 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:20:31.433 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:20:31.454 2025] Trying to boot from MMC1 [Fri Jan 03 14:20:31.613 2025] Authentication passed [Fri Jan 03 14:20:31.629 2025] Authentication passed [Fri Jan 03 14:20:31.629 2025] Authentication passed [Fri Jan 03 14:20:31.660 2025] Authentication passed [Fri Jan 03 14:20:31.676 2025] Authentication passed [Fri Jan 03 14:20:31.676 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:20:31.676 2025] [Fri Jan 03 14:20:31.692 2025] NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty [Fri Jan 03 14:20:31.692 2025] NOTICE: BL31: Built : 09:34:15, Aug 24 2023 [Fri Jan 03 14:20:31.991 2025] [Fri Jan 03 14:20:31.991 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:20:31.991 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:20:32.042 2025] SPL initial stack usage: 1856 bytes [Fri Jan 03 14:20:32.042 2025] Error: could not access storage. [Fri Jan 03 14:20:32.042 2025] Trying to boot from MMC1 [Fri Jan 03 14:20:32.197 2025] Authentication passed [Fri Jan 03 14:20:32.212 2025] Authentication passed [Fri Jan 03 14:20:32.858 2025] [Fri Jan 03 14:20:32.873 2025] [Fri Jan 03 14:20:32.873 2025] U-Boot 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:20:32.873 2025] [Fri Jan 03 14:20:32.873 2025] SoC: AM62X SR1.0 HS-FS [Fri Jan 03 14:20:32.873 2025] Model: Texas Instruments AM625 SK [Fri Jan 03 14:20:32.873 2025] DRAM: 2 GiB [Fri Jan 03 14:20:33.109 2025] Core: 68 devices, 30 uclasses, devicetree: separate [Fri Jan 03 14:20:33.125 2025] MMC: mmc@fa10000: 0, mmc@fa00000: 1 [Fri Jan 03 14:20:33.125 2025] Loading Environment from MMC... OK [Fri Jan 03 14:20:33.330 2025] In: serial [Fri Jan 03 14:20:33.330 2025] Out: serial [Fri Jan 03 14:20:33.330 2025] Err: serial [Fri Jan 03 14:20:33.347 2025] [BSP] gd->boot_dev = 9 [Fri Jan 03 14:20:33.347 2025] Saving Environment to MMC... Writing to redundant MMC(0)... OK [Fri Jan 03 14:20:33.502 2025] switch to partitions #0, OK [Fri Jan 03 14:20:33.502 2025] mmc0(part 0) is current device [Fri Jan 03 14:20:33.654 2025] SD/MMC found on device 0 [Fri Jan 03 14:20:33.657 2025] Running eMMC boot ... [Fri Jan 03 14:20:33.673 2025] 574 bytes read in 14 ms (40 KiB/s) [Fri Jan 03 14:20:33.677 2025] EMMC Loaded env from uEnv.txt [Fri Jan 03 14:20:33.682 2025] Importing environment from mmc0 ... [Fri Jan 03 14:20:33.905 2025] 18416128 bytes read in 216 ms (81.3 MiB/s) [Fri Jan 03 14:20:33.926 2025] 62962 bytes read in 16 ms (3.8 MiB/s) [Fri Jan 03 14:20:33.929 2025] Working FDT set to 88000000 [Fri Jan 03 14:20:33.933 2025] ## Flattened Device Tree blob at 88000000 [Fri Jan 03 14:20:33.938 2025] Booting using the fdt blob at 0x88000000 [Fri Jan 03 14:20:33.943 2025] Working FDT set to 88000000 [Fri Jan 03 14:20:33.966 2025] ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) [Fri Jan 03 14:20:33.973 2025] Loading Device Tree to 000000008feed000, end 000000008fffffff ... OK [Fri Jan 03 14:20:33.980 2025] Working FDT set to 8feed000 [Fri Jan 03 14:20:33.991 2025] [Fri Jan 03 14:20:33.992 2025] Starting kernel ... [Fri Jan 03 14:20:33.995 2025] [Fri Jan 03 14:20:34.028 2025] [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [Fri Jan 03 14:20:34.034 2025] [ 0.000000] Linux version 6.1.46-rt13-BSP_12.5.1--g2ff8ed6046 (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_RT Wed Jul 3 08:48:50 UTC 2024 [Fri Jan 03 14:20:34.054 2025] [ 0.000000] Machine model: Texas Instruments AM625 SK [Fri Jan 03 14:20:34.060 2025] [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [Fri Jan 03 14:20:34.150 2025] [ 0.000000] printk: bootconsole [ns16550a0] enabled [Fri Jan 03 14:20:34.155 2025] [ 0.000000] efi: UEFI not found. [Fri Jan 03 14:20:34.160 2025] [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [Fri Jan 03 14:20:34.167 2025] [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Fri Jan 03 14:20:34.175 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [Fri Jan 03 14:20:34.182 2025] [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [Fri Jan 03 14:20:34.191 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [Fri Jan 03 14:20:34.199 2025] [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [Fri Jan 03 14:20:34.209 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [Fri Jan 03 14:20:34.217 2025] [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [Fri Jan 03 14:20:34.226 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [Fri Jan 03 14:20:34.234 2025] [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [Fri Jan 03 14:20:34.244 2025] [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [Fri Jan 03 14:20:34.252 2025] [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [Fri Jan 03 14:20:34.261 2025] [ 0.000000] Zone ranges: [Fri Jan 03 14:20:34.266 2025] [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:20:34.272 2025] [ 0.000000] DMA32 empty [Fri Jan 03 14:20:34.280 2025] [ 0.000000] Normal empty [Fri Jan 03 14:20:34.280 2025] [ 0.000000] Movable zone start for each node [Fri Jan 03 14:20:34.285 2025] [ 0.000000] Early memory node ranges [Fri Jan 03 14:20:34.290 2025] [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [Fri Jan 03 14:20:34.294 2025] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [Fri Jan 03 14:20:34.299 2025] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [Fri Jan 03 14:20:34.305 2025] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [Fri Jan 03 14:20:34.311 2025] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [Fri Jan 03 14:20:34.316 2025] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [Fri Jan 03 14:20:34.323 2025] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [Fri Jan 03 14:20:34.329 2025] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [Fri Jan 03 14:20:34.336 2025] [ 0.000000] psci: probing for conduit method from DT. [Fri Jan 03 14:20:34.342 2025] [ 0.000000] psci: PSCIv1.1 detected in firmware. [Fri Jan 03 14:20:34.347 2025] [ 0.000000] psci: Using standard PSCI v0.2 function IDs [Fri Jan 03 14:20:34.351 2025] [ 0.000000] psci: Trusted OS migration not required [Fri Jan 03 14:20:34.357 2025] [ 0.000000] psci: SMC Calling Convention v1.4 [Fri Jan 03 14:20:34.362 2025] [ 0.000000] percpu: Embedded 21 pages/cpu s45952 r8192 d31872 u86016 [Fri Jan 03 14:20:34.368 2025] [ 0.000000] pcpu-alloc: s45952 r8192 d31872 u86016 alloc=21*4096 [Fri Jan 03 14:20:34.373 2025] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Fri Jan 03 14:20:34.380 2025] [ 0.000000] Detected VIPT I-cache on CPU0 [Fri Jan 03 14:20:34.385 2025] [ 0.000000] CPU features: detected: GIC system register CPU interface [Fri Jan 03 14:20:34.390 2025] [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [Fri Jan 03 14:20:34.397 2025] [ 0.000000] CPU features: detected: ARM erratum 845719 [Fri Jan 03 14:20:34.402 2025] [ 0.000000] alternatives: applying boot alternatives [Fri Jan 03 14:20:34.410 2025] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [Fri Jan 03 14:20:34.416 2025] [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736 rw rootfstype=ext4 rootwait systemd.show_status=no loglevel=8 syntec_extend= [Fri Jan 03 14:20:34.462 2025] [ 0.000000] Unknown kernel command line parameters "syntec_extend=", will be passed to user space. [Fri Jan 03 14:20:34.475 2025] [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [Fri Jan 03 14:20:34.483 2025] [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [Fri Jan 03 14:20:34.486 2025] [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [Fri Jan 03 14:20:34.493 2025] [ 0.000000] Memory: 1844200K/2097152K available (10688K kernel code, 1216K rwdata, 4084K rodata, 1856K init, 416K bss, 121880K reserved, 131072K cma-reserved) [Fri Jan 03 14:20:34.510 2025] [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Fri Jan 03 14:20:34.516 2025] [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [Fri Jan 03 14:20:34.521 2025] [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [Fri Jan 03 14:20:34.528 2025] [ 0.000000] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [Fri Jan 03 14:20:34.534 2025] [ 0.000000] No expedited grace period (rcu_normal_after_boot). [Fri Jan 03 14:20:34.540 2025] [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [Fri Jan 03 14:20:34.547 2025] [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [Fri Jan 03 14:20:34.558 2025] [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [Fri Jan 03 14:20:34.559 2025] [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [Fri Jan 03 14:20:34.564 2025] [ 0.000000] GICv3: 256 SPIs implemented [Fri Jan 03 14:20:34.571 2025] [ 0.000000] GICv3: 0 Extended SPIs implemented [Fri Jan 03 14:20:34.576 2025] [ 0.000000] Root IRQ handler: gic_handle_irq [Fri Jan 03 14:20:34.580 2025] [ 0.000000] GICv3: GICv3 features: 16 PPIs [Fri Jan 03 14:20:34.585 2025] [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [Fri Jan 03 14:20:34.590 2025] [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [Fri Jan 03 14:20:34.597 2025] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [Fri Jan 03 14:20:34.602 2025] [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [Fri Jan 03 14:20:34.608 2025] [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [Fri Jan 03 14:20:34.616 2025] [ 0.000000] ITS: using cache flushing for cmd queue [Fri Jan 03 14:20:34.622 2025] [ 0.000000] GICv3: using LPI property table @0x0000000080030000 [Fri Jan 03 14:20:34.628 2025] [ 0.000000] GIC: using cache flushing for LPI property table [Fri Jan 03 14:20:34.634 2025] [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080040000 [Fri Jan 03 14:20:34.645 2025] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [Fri Jan 03 14:20:34.651 2025] [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [Fri Jan 03 14:20:34.654 2025] [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [Fri Jan 03 14:20:34.665 2025] [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [Fri Jan 03 14:20:34.673 2025] [ 0.000246] Console: colour dummy device 80x25 [Fri Jan 03 14:20:34.683 2025] [ 0.528872] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=200000) [Fri Jan 03 14:20:34.690 2025] [ 0.528882] pid_max: default: 32768 minimum: 301 [Fri Jan 03 14:20:34.696 2025] [ 0.528967] LSM: Security Framework initializing [Fri Jan 03 14:20:34.701 2025] [ 0.529101] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:20:34.708 2025] [ 0.529124] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [Fri Jan 03 14:20:34.715 2025] [ 0.530812] rcu: Hierarchical SRCU implementation. [Fri Jan 03 14:20:34.721 2025] [ 0.530819] rcu: Max phase no-delay instances is 400. [Fri Jan 03 14:20:34.730 2025] [ 0.530864] printk: bootconsole [ns16550a0] printing thread started [Fri Jan 03 14:20:34.738 2025] [ 0.583326] Platform MSI: msi-controller@1820000 domain created [Fri Jan 03 14:20:34.742 2025] [ 0.583575] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [Fri Jan 03 14:20:34.750 2025] [ 0.583664] EFI services will not be available. [Fri Jan 03 14:20:34.757 2025] [ 0.583926] smp: Bringing up secondary CPUs ... [Fri Jan 03 14:20:34.762 2025] [ 0.584694] Detected VIPT I-cache on CPU1 [Fri Jan 03 14:20:34.766 2025] [ 0.584807] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [Fri Jan 03 14:20:34.771 2025] [ 0.584824] GICv3: CPU1: using allocated LPI pending table @0x0000000080050000 [Fri Jan 03 14:20:34.777 2025] [ 0.584883] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [Fri Jan 03 14:20:34.788 2025] [ 0.634961] Detected VIPT I-cache on CPU2 [Fri Jan 03 14:20:34.790 2025] [ 0.635051] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [Fri Jan 03 14:20:34.796 2025] [ 0.635064] GICv3: CPU2: using allocated LPI pending table @0x0000000080060000 [Fri Jan 03 14:20:34.803 2025] [ 0.635099] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [Fri Jan 03 14:20:34.813 2025] [ 0.660962] Detected VIPT I-cache on CPU3 [Fri Jan 03 14:20:34.814 2025] [ 0.661049] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [Fri Jan 03 14:20:34.822 2025] [ 0.661062] GICv3: CPU3: using allocated LPI pending table @0x0000000080070000 [Fri Jan 03 14:20:34.832 2025] [ 0.661095] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [Fri Jan 03 14:20:34.835 2025] [ 0.661154] smp: Brought up 1 node, 4 CPUs [Fri Jan 03 14:20:34.840 2025] [ 0.661160] SMP: Total of 4 processors activated. [Fri Jan 03 14:20:34.848 2025] [ 0.695343] CPU features: detected: 32-bit EL0 Support [Fri Jan 03 14:20:34.851 2025] [ 0.695346] CPU features: detected: CRC32 instructions [Fri Jan 03 14:20:34.857 2025] [ 0.695393] CPU: All CPU(s) started at EL2 [Fri Jan 03 14:20:34.862 2025] [ 0.695395] alternatives: applying system-wide alternatives [Fri Jan 03 14:20:34.867 2025] [ 0.696927] devtmpfs: initialized [Fri Jan 03 14:20:34.873 2025] [ 0.708582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [Fri Jan 03 14:20:34.880 2025] [ 0.708608] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Fri Jan 03 14:20:34.887 2025] [ 0.713815] pinctrl core: initialized pinctrl subsystem [Fri Jan 03 14:20:34.892 2025] [ 0.714626] DMI not present or invalid. [Fri Jan 03 14:20:34.898 2025] [ 0.715162] NET: Registered PF_NETLINK/PF_ROUTE protocol family [Fri Jan 03 14:20:34.903 2025] [ 0.729139] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [Fri Jan 03 14:20:34.909 2025] [ 0.729421] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [Fri Jan 03 14:20:34.917 2025] [ 0.729611] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [Fri Jan 03 14:20:34.924 2025] [ 0.729757] audit: initializing netlink subsys (disabled) [Fri Jan 03 14:20:34.930 2025] [ 0.729951] audit: type=2000 audit(0.727:1): state=initialized audit_enabled=0 res=1 [Fri Jan 03 14:20:34.939 2025] [ 0.730588] thermal_sys: Registered thermal governor 'step_wise' [Fri Jan 03 14:20:34.945 2025] [ 0.730593] thermal_sys: Registered thermal governor 'power_allocator' [Fri Jan 03 14:20:34.951 2025] [ 0.730837] ASID allocator initialised with 65536 entries [Fri Jan 03 14:20:34.957 2025] [ 0.745786] platform 30200000.dss: Fixed dependency cycle(s) with /display0 [Fri Jan 03 14:20:34.963 2025] [ 0.754934] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [Fri Jan 03 14:20:34.970 2025] [ 0.754944] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [Fri Jan 03 14:20:34.977 2025] [ 0.754948] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:20:34.987 2025] [ 0.754951] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [Fri Jan 03 14:20:34.990 2025] [ 0.754954] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [Fri Jan 03 14:20:34.997 2025] [ 0.754957] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [Fri Jan 03 14:20:35.004 2025] [ 0.754961] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [Fri Jan 03 14:20:35.011 2025] [ 0.754964] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [Fri Jan 03 14:20:35.017 2025] [ 0.756120] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [Fri Jan 03 14:20:35.025 2025] [ 0.756633] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [Fri Jan 03 14:20:35.033 2025] [ 0.756641] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [Fri Jan 03 14:20:35.040 2025] [ 0.756653] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [Fri Jan 03 14:20:35.048 2025] [ 0.756669] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [Fri Jan 03 14:20:35.057 2025] [ 0.756680] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.064 2025] [ 0.756687] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [Fri Jan 03 14:20:35.071 2025] [ 0.756912] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [Fri Jan 03 14:20:35.078 2025] [ 0.756917] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [Fri Jan 03 14:20:35.085 2025] [ 0.756926] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [Fri Jan 03 14:20:35.094 2025] [ 0.756938] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [Fri Jan 03 14:20:35.102 2025] [ 0.756947] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.110 2025] [ 0.756951] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [Fri Jan 03 14:20:35.120 2025] [ 0.757203] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [Fri Jan 03 14:20:35.124 2025] [ 0.757208] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [Fri Jan 03 14:20:35.131 2025] [ 0.757221] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [Fri Jan 03 14:20:35.143 2025] [ 0.757234] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [Fri Jan 03 14:20:35.148 2025] [ 0.757242] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.160 2025] [ [ 1.006764] printk: console [ttyS2] printing thread started [Fri Jan 03 14:20:35.162 2025] 0.757246] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [Fri Jan 03 14:20:35.173 2025] [ 1.006782] printk: console [ttyS2] enabled [Fri Jan 03 14:20:35.175 2025] [ 1.006786] printk: bootconsole [ns16550a0] disabled [Fri Jan 03 14:20:35.180 2025] [ 1.019183] printk: bootconsole [ns16550a0] printing thread stopped [Fri Jan 03 14:20:35.185 2025] [ 1.020362] omap8250 2810000.serial: GPIO lookup for consumer rs485-term [Fri Jan 03 14:20:35.191 2025] [ 1.020370] omap8250 2810000.serial: using device tree for GPIO lookup [Fri Jan 03 14:20:35.198 2025] [ 1.020384] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:20:35.208 2025] [ 1.020402] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2810000[0]' [Fri Jan 03 14:20:35.223 2025] [ 1.020413] omap8250 2810000.serial: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.226 2025] [ 1.020418] omap8250 2810000.serial: No GPIO consumer rs485-term found [Fri Jan 03 14:20:35.233 2025] [ 1.020448] 2810000.serial: ttyS1 at MMIO 0x2810000 (irq = 288, base_baud = 3000000) is a 8250 [Fri Jan 03 14:20:35.241 2025] [ 1.021375] panel-simple display0: GPIO lookup for consumer enable [Fri Jan 03 14:20:35.250 2025] [ 1.021383] panel-simple display0: using device tree for GPIO lookup [Fri Jan 03 14:20:35.253 2025] [ 1.021396] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/display0[0]' [Fri Jan 03 14:20:35.263 2025] [ 1.021412] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/display0[0]' [Fri Jan 03 14:20:35.271 2025] [ 1.021422] panel-simple display0: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.278 2025] [ 1.021426] panel-simple display0: No GPIO consumer enable found [Fri Jan 03 14:20:35.288 2025] [ 1.024384] [drm] Initialized tidss 1.0.0 20180215 for 30200000.dss on minor 0 [Fri Jan 03 14:20:35.291 2025] [ 1.031605] tidss 30200000.dss: [drm] fb0: tidssdrmfb frame buffer device [Fri Jan 03 14:20:35.298 2025] [ 1.038158] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [Fri Jan 03 14:20:35.306 2025] [ 1.038631] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [Fri Jan 03 14:20:35.312 2025] [ 1.038638] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [Fri Jan 03 14:20:35.317 2025] [ 1.038652] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:20:35.328 2025] [ 1.038668] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [Fri Jan 03 14:20:35.339 2025] [ 1.038682] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.349 2025] [ 1.038692] mdio_bus 8000f00.mdio: No GPIO consumer reset found [Fri Jan 03 14:20:35.351 2025] [ 1.072070] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [Fri Jan 03 14:20:35.359 2025] [ 1.072364] mdio_bus 8000f00.mdio: MDIO device at address 0 is missing. [Fri Jan 03 14:20:35.367 2025] [ 1.073160] mdio_bus 8000f00.mdio:03: GPIO lookup for consumer reset [Fri Jan 03 14:20:35.373 2025] [ 1.073169] mdio_bus 8000f00.mdio:03: using device tree for GPIO lookup [Fri Jan 03 14:20:35.383 2025] [ 1.073186] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:20:35.392 2025] [ 1.073211] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@3[0]' [Fri Jan 03 14:20:35.403 2025] [ 1.073225] mdio_bus 8000f00.mdio:03: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.410 2025] [ 1.073229] mdio_bus 8000f00.mdio:03: No GPIO consumer reset found [Fri Jan 03 14:20:35.416 2025] [ 1.073997] davinci_mdio 8000f00.mdio: phy[3]: device 8000f00.mdio:03, driver TI DP83822 [Fri Jan 03 14:20:35.424 2025] [ 1.074067] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [Fri Jan 03 14:20:35.437 2025] [ 1.074311] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [Fri Jan 03 14:20:35.444 2025] [ 1.074324] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [Fri Jan 03 14:20:35.450 2025] [ 1.074329] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [Fri Jan 03 14:20:35.457 2025] [ 1.075143] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:0 [Fri Jan 03 14:20:35.466 2025] [ 1.091589] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [Fri Jan 03 14:20:35.472 2025] [ 1.096346] physmap-flash 50000000.fpgaBus: physmap platform flash device: [mem 0x50000000-0x50ffffff] [Fri Jan 03 14:20:35.482 2025] [ 1.096393] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:20:35.488 2025] [ 1.096399] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:20:35.494 2025] [ 1.096411] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:20:35.503 2025] [ 1.096436] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [Fri Jan 03 14:20:35.512 2025] [ 1.096447] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.520 2025] [ 1.096451] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [Fri Jan 03 14:20:35.526 2025] [ 1.097309] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [Fri Jan 03 14:20:35.532 2025] [ 1.097321] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:20:35.539 2025] [ 1.097334] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:20:35.547 2025] [ 1.097356] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:20:35.561 2025] [ 1.097367] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.564 2025] [ 1.097372] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [Fri Jan 03 14:20:35.574 2025] [ 1.097382] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:20:35.580 2025] [ 1.097385] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:20:35.583 2025] [ 1.097394] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:20:35.592 2025] [ 1.097406] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [Fri Jan 03 14:20:35.601 2025] [ 1.097414] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.608 2025] [ 1.097418] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [Fri Jan 03 14:20:35.616 2025] [ 1.097909] mmc0: CQHCI version 5.10 [Fri Jan 03 14:20:35.621 2025] [ 1.098115] mmc1: CQHCI version 5.10 [Fri Jan 03 14:20:35.625 2025] [ 1.099819] sdhci-am654 fa20000.mmc: GPIO lookup for consumer wp [Fri Jan 03 14:20:35.631 2025] [ 1.099838] sdhci-am654 fa20000.mmc: using device tree for GPIO lookup [Fri Jan 03 14:20:35.636 2025] [ 1.099852] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:20:35.644 2025] [ 1.099879] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa20000[0]' [Fri Jan 03 14:20:35.658 2025] [ 1.099891] sdhci-am654 fa20000.mmc: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.661 2025] [ 1.099897] sdhci-am654 fa20000.mmc: No GPIO consumer wp found [Fri Jan 03 14:20:35.667 2025] [ 1.100353] mmc2: CQHCI version 5.10 [Fri Jan 03 14:20:35.672 2025] [ 1.100796] physmap-flash 51000000.fpgaBus: physmap platform flash device: [mem 0x51000000-0x51ffffff] [Fri Jan 03 14:20:35.679 2025] [ 1.103244] physmap-flash 52000000.fpgaBus: physmap platform flash device: [mem 0x52000000-0x52ffffff] [Fri Jan 03 14:20:35.688 2025] [ 1.106172] gpiochip_find_base: found new base at 418 [Fri Jan 03 14:20:35.698 2025] [ 1.106380] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [Fri Jan 03 14:20:35.700 2025] [ 1.106444] gpio gpiochip1: registered GPIOs 418 to 509 on 600000.gpio [Fri Jan 03 14:20:35.708 2025] [ 1.109537] gpiochip_find_base: found new base at 366 [Fri Jan 03 14:20:35.720 2025] [ 1.109732] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [Fri Jan 03 14:20:35.730 2025] [ 1.109798] gpio gpiochip2: registered GPIOs 366 to 417 on 601000.gpio [Fri Jan 03 14:20:35.732 2025] [ 1.111441] gpio-regulator regulator-4: GPIO lookup for consumer (null) [Fri Jan 03 14:20:35.739 2025] [ 1.111451] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:20:35.748 2025] [ 1.111473] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [Fri Jan 03 14:20:35.755 2025] [ 1.111490] gpio gpiochip1: Persistence not supported for GPIO 31 [Fri Jan 03 14:20:35.762 2025] [ 1.111507] gpio-regulator regulator-4: GPIO lookup for consumer enable [Fri Jan 03 14:20:35.772 2025] [ 1.111511] gpio-regulator regulator-4: using device tree for GPIO lookup [Fri Jan 03 14:20:35.774 2025] [ 1.111519] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [Fri Jan 03 14:20:35.783 2025] [ 1.111531] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [Fri Jan 03 14:20:35.793 2025] [ 1.111540] gpio-regulator regulator-4: using lookup tables for GPIO lookup [Fri Jan 03 14:20:35.800 2025] [ 1.111545] gpio-regulator regulator-4: No GPIO consumer enable found [Fri Jan 03 14:20:35.806 2025] [ 1.111973] gpio-backlight backlight: GPIO lookup for consumer (null) [Fri Jan 03 14:20:35.814 2025] [ 1.111979] gpio-backlight backlight: using device tree for GPIO lookup [Fri Jan 03 14:20:35.820 2025] [ 1.111992] of_get_named_gpiod_flags: parsed 'gpios' property of node '/backlight[0]' - status (0) [Fri Jan 03 14:20:35.829 2025] [ 1.112002] gpio gpiochip1: Persistence not supported for GPIO 91 [Fri Jan 03 14:20:35.834 2025] [ 1.112010] gpio-509 (backlight): no flags found for (null) [Fri Jan 03 14:20:35.840 2025] [ 1.112532] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_os[0]' - status (0) [Fri Jan 03 14:20:35.852 2025] [ 1.112544] gpio gpiochip1: Persistence not supported for GPIO 35 [Fri Jan 03 14:20:35.855 2025] [ 1.112547] gpio-453 (?): no flags found for gpios [Fri Jan 03 14:20:35.860 2025] [ 1.112641] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_boot[0]' - status (0) [Fri Jan 03 14:20:35.869 2025] [ 1.112653] gpio gpiochip2: Persistence not supported for GPIO 30 [Fri Jan 03 14:20:35.875 2025] [ 1.112656] gpio-396 (?): no flags found for gpios [Fri Jan 03 14:20:35.881 2025] [ 1.112718] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led_user1[0]' - status (0) [Fri Jan 03 14:20:35.890 2025] [ 1.112729] gpio gpiochip2: Persistence not supported for GPIO 9 [Fri Jan 03 14:20:35.896 2025] [ 1.112735] gpio-375 (?): no flags found for gpios [Fri Jan 03 14:20:35.901 2025] [ 1.113476] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [Fri Jan 03 14:20:35.907 2025] [ 1.116289] debugfs: Directory 'pd:186' with parent 'pm_genpd' already present! [Fri Jan 03 14:20:35.918 2025] [ 1.128484] ALSA device list: [Fri Jan 03 14:20:35.919 2025] [ 1.128495] No soundcards found. [Fri Jan 03 14:20:35.925 2025] [ 1.135226] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [Fri Jan 03 14:20:35.930 2025] [ 1.141821] mmc2: SDHCI controller on fa20000.mmc [fa20000.mmc] using ADMA 64-bit [Fri Jan 03 14:20:35.936 2025] [ 1.150523] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [Fri Jan 03 14:20:35.947 2025] [ 1.150691] Waiting for root device PARTUUID=c3330aca-fc46-4890-9f49-a705e36d0736... [Fri Jan 03 14:20:35.951 2025] [ 1.196541] mmc1: new MMC card at address 0001 [Fri Jan 03 14:20:35.957 2025] [ 1.197404] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB [Fri Jan 03 14:20:35.962 2025] [ 1.205803] mmcblk1: p1 [Fri Jan 03 14:20:35.967 2025] [ 1.206656] mmcblk1boot0: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:20:35.972 2025] [ 1.208302] mmcblk1boot1: mmc1:0001 Q2J54A 2.00 MiB [Fri Jan 03 14:20:35.977 2025] [ 1.209624] mmcblk1rpmb: mmc1:0001 Q2J54A 512 KiB, chardev (241:0) [Fri Jan 03 14:20:35.982 2025] [ 1.288030] mmc0: Command Queue Engine enabled [Fri Jan 03 14:20:35.986 2025] [ 1.288057] mmc0: new HS200 MMC card at address 0001 [Fri Jan 03 14:20:35.992 2025] [ 1.288785] mmcblk0: mmc0:0001 016GB0 14.7 GiB [Fri Jan 03 14:20:35.996 2025] [ 1.292673] mmcblk0: p1 p2 p3 p4 p5 [Fri Jan 03 14:20:36.001 2025] [ 1.293759] mmcblk0boot0: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:20:36.005 2025] [ 1.295125] mmcblk0boot1: mmc0:0001 016GB0 4.00 MiB [Fri Jan 03 14:20:36.010 2025] [ 1.296243] mmcblk0rpmb: mmc0:0001 016GB0 4.00 MiB, chardev (241:1) [Fri Jan 03 14:20:36.015 2025] [ 1.311623] EXT4-fs (mmcblk0p4): recovery complete [Fri Jan 03 14:20:36.021 2025] [ 1.312004] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:36.026 2025] [ 1.312099] VFS: Mounted root (ext4 filesystem) on device 179:100. [Fri Jan 03 14:20:36.032 2025] [ 1.312253] devtmpfs: mounted [Fri Jan 03 14:20:36.037 2025] [ 1.313666] Freeing unused kernel memory: 1856K [Fri Jan 03 14:20:36.043 2025] [ 1.313787] Run /sbin/init as init process [Fri Jan 03 14:20:36.048 2025] [ 1.313791] with arguments: [Fri Jan 03 14:20:36.048 2025] [ 1.313793] /sbin/init [Fri Jan 03 14:20:36.053 2025] [ 1.313795] with environment: [Fri Jan 03 14:20:36.058 2025] [ 1.313796] HOME=/ [Fri Jan 03 14:20:36.059 2025] [ 1.313798] TERM=linux [Fri Jan 03 14:20:36.059 2025] [ 1.313800] syntec_extend= [Fri Jan 03 14:20:36.064 2025] [ 1.404865] systemd[1]: System time before build time, advancing clock. [Fri Jan 03 14:20:36.070 2025] [ 1.428293] NET: Registered PF_INET6 protocol family [Fri Jan 03 14:20:36.075 2025] [ 1.429494] Segment Routing with IPv6 [Fri Jan 03 14:20:36.080 2025] [ 1.429531] In-situ OAM (IOAM) with IPv6 [Fri Jan 03 14:20:36.084 2025] [ 1.465204] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [Fri Jan 03 14:20:36.112 2025] [ 1.465760] systemd[1]: Detected architecture arm64. [Fri Jan 03 14:20:36.117 2025] [ 1.469169] systemd[1]: Hostname set to . [Fri Jan 03 14:20:36.123 2025] [ 1.589614] systemd-sysv-generator[179]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [Fri Jan 03 14:20:36.146 2025] [ 1.891982] systemd[1]: Configuration file /etc/systemd/system/syntec-rename-network.service is marked executable. Please remove executable permission bits. Proceeding anyway. [Fri Jan 03 14:20:36.163 2025] [ 1.894758] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [Fri Jan 03 14:20:36.182 2025] [ 1.958870] systemd[1]: Queued start job for default target Graphical Interface. [Fri Jan 03 14:20:36.189 2025] [ 1.962250] systemd[1]: Created slice Slice /system/modprobe. [Fri Jan 03 14:20:36.195 2025] [ 1.963934] systemd[1]: Created slice Slice /system/serial-getty. [Fri Jan 03 14:20:36.201 2025] [ 1.964455] systemd[1]: Created slice User and Session Slice. [Fri Jan 03 14:20:36.207 2025] [ 1.964801] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [Fri Jan 03 14:20:36.214 2025] [ 1.965005] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [Fri Jan 03 14:20:36.222 2025] [ 1.965396] systemd[1]: Reached target Path Units. [Fri Jan 03 14:20:36.227 2025] [ 1.965496] systemd[1]: Reached target Remote File Systems. [Fri Jan 03 14:20:36.233 2025] [ 1.965571] systemd[1]: Reached target Slice Units. [Fri Jan 03 14:20:36.238 2025] [ 1.965656] systemd[1]: Reached target Swaps. [Fri Jan 03 14:20:36.244 2025] [ 1.969866] systemd[1]: Listening on RPCbind Server Activation Socket. [Fri Jan 03 14:20:36.249 2025] [ 1.970071] systemd[1]: Reached target RPC Port Mapper. [Fri Jan 03 14:20:36.254 2025] [ 1.976201] systemd[1]: Listening on Process Core Dump Socket. [Fri Jan 03 14:20:36.260 2025] [ 1.976680] systemd[1]: Listening on initctl Compatibility Named Pipe. [Fri Jan 03 14:20:36.267 2025] [ 1.977506] systemd[1]: Listening on Journal Audit Socket. [Fri Jan 03 14:20:36.273 2025] [ 1.978075] systemd[1]: Listening on Journal Socket (/dev/log). [Fri Jan 03 14:20:36.278 2025] [ 1.978702] systemd[1]: Listening on Journal Socket. [Fri Jan 03 14:20:36.283 2025] [ 1.979501] systemd[1]: Listening on Network Service Netlink Socket. [Fri Jan 03 14:20:36.289 2025] [ 1.980913] systemd[1]: Listening on udev Control Socket. [Fri Jan 03 14:20:36.294 2025] [ 1.981496] systemd[1]: Listening on udev Kernel Socket. [Fri Jan 03 14:20:36.300 2025] [ 1.982000] systemd[1]: Listening on User Database Manager Socket. [Fri Jan 03 14:20:36.306 2025] [ 2.045816] systemd[1]: Mounting Huge Pages File System... [Fri Jan 03 14:20:36.317 2025] [ 2.049870] systemd[1]: Mounting POSIX Message Queue File System... [Fri Jan 03 14:20:36.335 2025] [ 2.054440] systemd[1]: Mounting Kernel Debug File System... [Fri Jan 03 14:20:36.344 2025] [ 2.055276] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [Fri Jan 03 14:20:36.357 2025] [ 2.057239] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. [Fri Jan 03 14:20:36.363 2025] [ 2.061437] systemd[1]: Mounting Temporary Directory /tmp... [Fri Jan 03 14:20:36.374 2025] [ 2.067138] systemd[1]: Starting Create List of Static Device Nodes... [Fri Jan 03 14:20:36.377 2025] [ 2.072706] systemd[1]: Starting Load Kernel Module configfs... [Fri Jan 03 14:20:36.384 2025] [ 2.077488] systemd[1]: Starting Load Kernel Module drm... [Fri Jan 03 14:20:36.393 2025] [ 2.082579] systemd[1]: Starting Load Kernel Module fuse... [Fri Jan 03 14:20:36.394 2025] [ 2.090715] systemd[1]: Starting RPC Bind... [Fri Jan 03 14:20:36.400 2025] [ 2.091298] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [Fri Jan 03 14:20:36.411 2025] [ 2.092659] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [Fri Jan 03 14:20:36.424 2025] [ 2.092680] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [Fri Jan 03 14:20:36.432 2025] [ 2.096295] systemd[1]: Starting Journal Service... [Fri Jan 03 14:20:36.438 2025] [ 2.099319] fuse: init (API version 7.37) [Fri Jan 03 14:20:36.443 2025] [ 2.106357] systemd[1]: Starting Load Kernel Modules... [Fri Jan 03 14:20:36.449 2025] [ 2.111239] systemd[1]: Starting Generate network units from Kernel command line... [Fri Jan 03 14:20:36.456 2025] [ 2.116382] systemd[1]: Starting Remount Root and Kernel File Systems... [Fri Jan 03 14:20:36.462 2025] [ 2.121340] systemd[1]: Starting Coldplug All udev Devices... [Fri Jan 03 14:20:36.468 2025] [ 2.126576] systemd[1]: Starting Setup Virtual Console... [Fri Jan 03 14:20:36.473 2025] [ 2.140358] systemd[1]: Started RPC Bind. [Fri Jan 03 14:20:36.479 2025] [ 2.143494] systemd[1]: Mounted Huge Pages File System. [Fri Jan 03 14:20:36.485 2025] [ 2.146677] systemd[1]: Mounted POSIX Message Queue File System. [Fri Jan 03 14:20:36.491 2025] [ 2.147612] systemd[1]: Mounted Kernel Debug File System. [Fri Jan 03 14:20:36.499 2025] [ 2.149427] systemd[1]: Mounted Temporary Directory /tmp. [Fri Jan 03 14:20:36.504 2025] [ 2.150848] systemd[1]: Finished Create List of Static Device Nodes. [Fri Jan 03 14:20:36.506 2025] [ 2.157842] systemd[1]: modprobe@configfs.service: Deactivated successfully. [Fri Jan 03 14:20:36.513 2025] [ 2.158933] systemd[1]: Finished Load Kernel Module configfs. [Fri Jan 03 14:20:36.518 2025] [ 2.166352] systemd[1]: modprobe@drm.service: Deactivated successfully. [Fri Jan 03 14:20:36.530 2025] [ 2.167256] systemd[1]: Finished Load Kernel Module drm. [Fri Jan 03 14:20:36.531 2025] [ 2.168302] cryptodev: loading out-of-tree module taints kernel. [Fri Jan 03 14:20:36.537 2025] [ 2.169826] systemd[1]: modprobe@fuse.service: Deactivated successfully. [Fri Jan 03 14:20:36.544 2025] [ 2.170703] systemd[1]: Finished Load Kernel Module fuse. [Fri Jan 03 14:20:36.549 2025] [ 2.172683] systemd[1]: Finished Generate network units from Kernel command line. [Fri Jan 03 14:20:36.556 2025] [ 2.181802] cryptodev: driver 1.12 loaded. [Fri Jan 03 14:20:36.560 2025] [ 2.191862] EXT4-fs (mmcblk0p4): re-mounted. Quota mode: none. [Fri Jan 03 14:20:36.566 2025] [ 2.195624] systemd[1]: Mounting FUSE Control File System... [Fri Jan 03 14:20:36.573 2025] [ 2.204990] systemd[1]: Mounting Kernel Configuration File System... [Fri Jan 03 14:20:36.579 2025] [ 2.210326] systemd[1]: Finished Load Kernel Modules. [Fri Jan 03 14:20:36.584 2025] [ 2.211618] systemd[1]: Finished Remount Root and Kernel File Systems. [Fri Jan 03 14:20:36.596 2025] [ 2.212963] systemd[1]: Finished Setup Virtual Console. [Fri Jan 03 14:20:36.597 2025] [ 2.213789] systemd[1]: Mounted FUSE Control File System. [Fri Jan 03 14:20:36.602 2025] [ 2.217259] systemd[1]: Rebuild Hardware Database was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:20:36.617 2025] [ 2.217640] systemd[1]: Platform Persistent Storage Archival was skipped because of a failed condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [Fri Jan 03 14:20:36.625 2025] [ 2.226574] systemd[1]: Starting Apply Kernel Variables... [Fri Jan 03 14:20:36.631 2025] [ 2.229035] systemd[1]: Create System Users was skipped because of a failed condition check (ConditionNeedsUpdate=/etc). [Fri Jan 03 14:20:36.642 2025] [ 2.234186] systemd[1]: Starting Create Static Device Nodes in /dev... [Fri Jan 03 14:20:36.648 2025] [ 2.238482] systemd[1]: Mounted Kernel Configuration File System. [Fri Jan 03 14:20:36.661 2025] [ 2.302534] systemd[1]: Finished Apply Kernel Variables. [Fri Jan 03 14:20:36.663 2025] [ 2.304614] systemd[1]: Finished Create Static Device Nodes in /dev. [Fri Jan 03 14:20:36.668 2025] [ 2.305318] systemd[1]: Reached target Preparation for Local File Systems. [Fri Jan 03 14:20:36.678 2025] [ 2.324881] systemd[1]: Mounting /media/ram... [Fri Jan 03 14:20:36.686 2025] [ 2.330168] systemd[1]: Mounting /var/volatile... [Fri Jan 03 14:20:36.688 2025] [ 2.334582] systemd[1]: Starting Rule-based Manager for Device Events and Files... [Fri Jan 03 14:20:36.699 2025] [ 2.335928] systemd[1]: Started Journal Service. [Fri Jan 03 14:20:36.703 2025] [ 2.393903] systemd-journald[189]: Received client request to flush runtime journal. [Fri Jan 03 14:20:36.814 2025] [ 2.662124] random: crng init done [Fri Jan 03 14:20:36.994 2025] [ 2.844328] spi_master spi1: GPIO lookup for consumer cs [Fri Jan 03 14:20:37.004 2025] [ 2.844349] spi_master spi1: using device tree for GPIO lookup [Fri Jan 03 14:20:37.007 2025] [ 2.844364] of_get_named_gpiod_flags: can't parse 'cs-gpios' property of node '/bus@f0000/spi@20100000[0]' [Fri Jan 03 14:20:37.016 2025] [ 2.844402] of_get_named_gpiod_flags: parsed 'cs-gpio' property of node '/bus@f0000/spi@20100000[0]' - status (0) [Fri Jan 03 14:20:37.027 2025] [ 2.844422] gpio gpiochip2: Persistence not supported for GPIO 16 [Fri Jan 03 14:20:37.034 2025] [ 2.865334] xlnx-slave-spi spi1.0: GPIO lookup for consumer prog_b [Fri Jan 03 14:20:37.040 2025] [ 2.865362] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:20:37.046 2025] [ 2.865400] of_get_named_gpiod_flags: parsed 'prog_b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:20:37.075 2025] [ 2.865438] gpio gpiochip1: Persistence not supported for GPIO 5 [Fri Jan 03 14:20:37.111 2025] [ 2.865458] xlnx-slave-spi spi1.0: GPIO lookup for consumer init-b [Fri Jan 03 14:20:37.129 2025] [ 2.865464] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:20:37.150 2025] [ 2.865475] of_get_named_gpiod_flags: parsed 'init-b-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:20:37.178 2025] [ 2.865487] gpio gpiochip1: Persistence not supported for GPIO 4 [Fri Jan 03 14:20:37.205 2025] [ 2.865494] xlnx-slave-spi spi1.0: GPIO lookup for consumer done [Fri Jan 03 14:20:37.215 2025] [ 2.865498] xlnx-slave-spi spi1.0: using device tree for GPIO lookup [Fri Jan 03 14:20:37.235 2025] [ 2.865508] of_get_named_gpiod_flags: parsed 'done-gpios' property of node '/bus@f0000/spi@20100000/fpga-mgr@0[0]' - status (0) [Fri Jan 03 14:20:37.251 2025] [ 2.865519] gpio gpiochip1: Persistence not supported for GPIO 6 [Fri Jan 03 14:20:37.260 2025] [ 2.913424] mc: Linux media interface: v0.10 [Fri Jan 03 14:20:37.264 2025] [ 2.931502] rtc-s35390a 1-0030: registered as rtc0 [Fri Jan 03 14:20:37.283 2025] [ 2.932658] rtc-s35390a 1-0030: setting system clock to 2023-04-09T18:50:52 UTC (1681066252) [Fri Jan 03 14:20:37.295 2025] [ 2.934803] systemd-journald[189]: Oldest entry in /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [Fri Jan 03 14:20:37.316 2025] [ 2.934836] systemd-journald[189]: /run/log/journal/67780a30dabb46fe89b0720e5bd1cfad/system.journal: Journal header limits reached or header out-of-date, rotating. [Fri Jan 03 14:20:37.348 2025] [ 2.966713] videodev: Linux video capture interface: v2.00 [Fri Jan 03 14:20:37.351 2025] [ 2.986488] spi_master spi2: GPIO lookup for consumer cs [Fri Jan 03 14:20:37.357 2025] [ 2.986512] spi_master spi2: using device tree for GPIO lookup [Fri Jan 03 14:20:37.362 2025] [ 2.986541] fram@0 enforce active low on chipselect handle [Fri Jan 03 14:20:37.369 2025] [ 2.986543] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/bus@f0000/spi@20120000[0]' - status (0) [Fri Jan 03 14:20:37.377 2025] [ 2.986577] gpio gpiochip2: Persistence not supported for GPIO 13 [Fri Jan 03 14:20:37.383 2025] [ 3.008986] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [Fri Jan 03 14:20:37.395 2025] [ 3.010216] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [Fri Jan 03 14:20:37.398 2025] [ 3.010314] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [Fri Jan 03 14:20:37.406 2025] [ 3.012153] remoteproc remoteproc0: 5000000.m4fss is available [Fri Jan 03 14:20:37.411 2025] [ 3.012985] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:20:37.420 2025] [ 3.013020] remoteproc remoteproc0: powering up 5000000.m4fss [Fri Jan 03 14:20:37.427 2025] [ 3.013102] remoteproc remoteproc0: Direct firmware load for am62-mcu-m4f0_0-fw failed with error -2 [Fri Jan 03 14:20:37.435 2025] [ 3.013114] remoteproc remoteproc0: request_firmware failed: -2 [Fri Jan 03 14:20:37.441 2025] [ 3.069236] rtc-ti-k3 2b1f0000.rtc: registered as rtc1 [Fri Jan 03 14:20:37.449 2025] [ 3.069276] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [Fri Jan 03 14:20:37.454 2025] [ 3.069284] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [Fri Jan 03 14:20:37.460 2025] [ 3.069304] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:20:37.473 2025] [ 3.069321] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [Fri Jan 03 14:20:37.480 2025] [ 3.069342] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [Fri Jan 03 14:20:37.487 2025] [ 3.069347] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [Fri Jan 03 14:20:37.497 2025] [ 3.103092] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [Fri Jan 03 14:20:37.526 2025] [ 3.118721] platform 78000000.r5f: configured R5F for IPC-only mode [Fri Jan 03 14:20:37.538 2025] [ 3.118915] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:20:37.559 2025] [ 3.121467] remoteproc remoteproc1: 78000000.r5f is available [Fri Jan 03 14:20:37.568 2025] [ 3.121552] remoteproc remoteproc1: attaching to 78000000.r5f [Fri Jan 03 14:20:37.582 2025] [ 3.148332] platform 78000000.r5f: R5F core initialized in IPC-only mode [Fri Jan 03 14:20:37.598 2025] [ 3.148382] rproc-virtio rproc-virtio.3.auto: assigned reserved memory node r5f-dma-memory@9da00000 [Fri Jan 03 14:20:37.629 2025] [ 3.153485] virtio_rpmsg_bus virtio0: rpmsg host is online [Fri Jan 03 14:20:37.645 2025] [ 3.153541] rproc-virtio rproc-virtio.3.auto: registered virtio0 (type 7) [Fri Jan 03 14:20:37.653 2025] [ 3.153550] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [Fri Jan 03 14:20:37.653 2025] [ 3.153803] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [Fri Jan 03 14:20:37.661 2025] [ 3.153958] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [Fri Jan 03 14:20:37.677 2025] [ 3.299249] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [Fri Jan 03 14:20:37.692 2025] [ 3.378665] Init FPGA interrupt driver (1.0) [Fri Jan 03 14:20:37.692 2025] [ 3.390362] of_get_named_gpiod_flags: parsed 'kick-gpios' property of node '/sysintrdrv[0]' - status (0) [Fri Jan 03 14:20:37.708 2025] [ 3.390393] Get kick_gpio number= (418) [Fri Jan 03 14:20:38.369 2025] [ 4.221402] remoteproc remoteproc2: 30074000.pru is available [Fri Jan 03 14:20:38.385 2025] [ 4.225966] remoteproc remoteproc3: 30078000.pru is available [Fri Jan 03 14:20:38.416 2025] [ 4.276379] fm25_syntec spi2.0: GPIO lookup for consumer wp [Fri Jan 03 14:20:38.432 2025] [ 4.276399] fm25_syntec spi2.0: using device tree for GPIO lookup [Fri Jan 03 14:20:38.455 2025] [ 4.276430] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:20:38.472 2025] [ 4.276463] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/spi@20120000/fram@0[0]' [Fri Jan 03 14:20:38.519 2025] [ 4.276482] fm25_syntec spi2.0: using lookup tables for GPIO lookup [Fri Jan 03 14:20:38.534 2025] [ 4.276492] fm25_syntec spi2.0: No GPIO consumer wp found [Fri Jan 03 14:20:38.534 2025] [ 4.291013] fm25_syntec spi2.0: 32 KByte fm25 fram, pagesize 4096 [Fri Jan 03 14:20:38.556 2025] [ 4.390416] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Fri Jan 03 14:20:38.556 2025] [ 4.397941] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [Fri Jan 03 14:20:38.644 2025] [ 4.495721] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [Fri Jan 03 14:20:38.656 2025] [ 4.495790] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 1 [Fri Jan 03 14:20:38.660 2025] [ 4.496010] xhci-hcd xhci-hcd.4.auto: USB3 root hub has no ports [Fri Jan 03 14:20:38.676 2025] [ 4.496022] xhci-hcd xhci-hcd.4.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [Fri Jan 03 14:20:38.692 2025] [ 4.496418] xhci-hcd xhci-hcd.4.auto: irq 472, io mem 0x31100000 [Fri Jan 03 14:20:38.692 2025] [ 4.510662] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Fri Jan 03 14:20:38.707 2025] [ 4.511608] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [Fri Jan 03 14:20:38.723 2025] [ 4.511635] cfg80211: failed to load regulatory.db [Fri Jan 03 14:20:38.723 2025] [ 4.515374] hub 1-0:1.0: USB hub found [Fri Jan 03 14:20:38.739 2025] [ 4.515431] hub 1-0:1.0: 1 port detected [Fri Jan 03 14:20:38.770 2025] [ 4.628280] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:20:38.786 2025] [ 4.628331] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rmii link mode [Fri Jan 03 14:20:38.896 2025] [ 4.758150] usb 1-1: new high-speed USB device number 2 using xhci-hcd [Fri Jan 03 14:20:39.100 2025] [ 4.950564] hub 1-1:1.0: USB hub found [Fri Jan 03 14:20:39.100 2025] [ 4.956081] hub 1-1:1.0: 4 ports detected [Fri Jan 03 14:20:39.630 2025] [ 5.472357] am65-cpsw-nuss 8000000.ethernet lan1: renamed from eth0 [Fri Jan 03 14:20:39.677 2025] [ 5.527829] am65-cpsw-nuss 8000000.ethernet lan1: PHY [8000f00.mdio:03] driver [TI DP83822] (irq=POLL) [Fri Jan 03 14:20:39.690 2025] [ 5.527872] am65-cpsw-nuss 8000000.ethernet lan1: configuring for phy/rmii link mode [Fri Jan 03 14:20:39.861 2025] [ 5.709459] EXT4-fs (mmcblk0p1): recovery complete [Fri Jan 03 14:20:39.868 2025] [ 5.709501] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:39.878 2025] [ 5.717276] EXT4-fs (mmcblk0p2): recovery complete [Fri Jan 03 14:20:39.883 2025] [ 5.717314] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:39.888 2025] [ 5.728239] EXT4-fs (mmcblk0p3): recovery complete [Fri Jan 03 14:20:39.894 2025] [ 5.728283] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:39.921 2025] [ 5.769554] EXT4-fs (mmcblk0p5): Using encoding defined by superblock: utf8-12.1.0 with flags 0x1 [Fri Jan 03 14:20:39.998 2025] [ 5.845835] EXT4-fs (mmcblk0p5): recovery complete [Fri Jan 03 14:20:40.001 2025] [ 5.846785] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:40.321 2025] *************************************************************** [Fri Jan 03 14:20:40.324 2025] *************************************************************** [Fri Jan 03 14:20:40.330 2025] NOTICE: This file system contains the following GPL-3.0 packages: [Fri Jan 03 14:20:40.336 2025] adwaita-icon-theme-symbolic [Fri Jan 03 14:20:40.342 2025] bash [Fri Jan 03 14:20:40.342 2025] cifs-utils [Fri Jan 03 14:20:40.342 2025] dosfstools [Fri Jan 03 14:20:40.342 2025] grub-common [Fri Jan 03 14:20:40.346 2025] grub-editenv [Fri Jan 03 14:20:40.350 2025] grub-efi [Fri Jan 03 14:20:40.350 2025] less [Fri Jan 03 14:20:40.350 2025] lib32-libgcc1 [Fri Jan 03 14:20:40.350 2025] lib32-libstdc++6 [Fri Jan 03 14:20:40.355 2025] libdw1 [Fri Jan 03 14:20:40.355 2025] libelf1 [Fri Jan 03 14:20:40.355 2025] libgcc1 [Fri Jan 03 14:20:40.355 2025] libgdbm-compat4 [Fri Jan 03 14:20:40.359 2025] libgdbm6 [Fri Jan 03 14:20:40.359 2025] libgmp10 [Fri Jan 03 14:20:40.359 2025] libidn2-0 [Fri Jan 03 14:20:40.359 2025] libreadline8 [Fri Jan 03 14:20:40.364 2025] libstdc++6 [Fri Jan 03 14:20:40.365 2025] libunistring2 [Fri Jan 03 14:20:40.365 2025] libvte-2.91-0 [Fri Jan 03 14:20:40.369 2025] nettle [Fri Jan 03 14:20:40.369 2025] onboard [Fri Jan 03 14:20:40.369 2025] parted [Fri Jan 03 14:20:40.369 2025] rxvt-unicode [Fri Jan 03 14:20:40.369 2025] [Fri Jan 03 14:20:40.369 2025] If you do not wish to distribute GPL-3.0 components please remove [Fri Jan 03 14:20:40.375 2025] the above packages prior to distribution. This can be done using [Fri Jan 03 14:20:40.380 2025] the opkg remove command. i.e.: [Fri Jan 03 14:20:40.381 2025] opkg remove [Fri Jan 03 14:20:40.385 2025] Where is the name printed in the list above [Fri Jan 03 14:20:40.394 2025] [Fri Jan 03 14:20:40.394 2025] NOTE: If the package is a dependency of another package you [Fri Jan 03 14:20:40.398 2025] will be notified of the dependent packages. You should [Fri Jan 03 14:20:40.403 2025] use the --force-removal-of-dependent-packages option to [Fri Jan 03 14:20:40.408 2025] also remove the dependent packages as well [Fri Jan 03 14:20:40.412 2025] *************************************************************** [Fri Jan 03 14:20:40.417 2025] *************************************************************** [Fri Jan 03 14:20:40.586 2025] [ 6.436694] EXT4-fs (mmcblk1p1): recovery complete [Fri Jan 03 14:20:40.591 2025] [ 6.438036] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jan 03 14:20:45.448 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:20:45.451 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:20:45.630 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:20:45.630 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:20:45.819 2025] [ 11.667414] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:20:45.819 2025] [ 11.667442] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:20:45.819 2025] [ 11.667464] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.835 2025] [ 11.667530] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:20:45.835 2025] [ 11.667535] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:20:45.850 2025] [ 11.667542] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.850 2025] [ 11.667582] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:20:45.850 2025] [ 11.667587] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:20:45.866 2025] [ 11.667594] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.873 2025] [ 11.667629] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:20:45.882 2025] [ 11.667635] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:20:45.882 2025] [ 11.667644] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.882 2025] [ 11.667678] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:20:45.898 2025] [ 11.667683] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:20:45.898 2025] [ 11.667689] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.913 2025] [ 11.667728] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:20:45.913 2025] [ 11.667733] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:20:45.913 2025] [Fri Jan 03 14:20:45.929 2025] [ 11.667741] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.929 2025] [ 11.667774] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:20:45.929 2025] [ 11.667779] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:20:45.945 2025] _____ _____ _ _ [ 11.667788] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.945 2025] [Fri Jan 03 14:20:45.945 2025] | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ [Fri Jan 03 14:20:45.960 2025] | [ 11.667823] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:20:45.960 2025] | _| .'| . | . | | __| _| . | | | -_| _| _| [Fri Jan 03 14:20:45.976 2025] |__|__|_| [ 11.667828] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:20:45.976 2025] |__,|_ |___| |__| |_| |___|_| |___|___|_| [Fri Jan 03 14:20:45.976 2025] |_[ 11.667834] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:45.992 2025] __| |___| [Fri Jan 03 14:20:45.992 2025] [Fri Jan 03 14:20:45.992 2025] Arago Project am62xx-evm - [Fri Jan 03 14:20:45.992 2025] [Fri Jan 03 14:20:45.992 2025] Arago 2023.10 am62xx-evm - [Fri Jan 03 14:20:45.992 2025] [Fri Jan 03 14:20:45.992 2025] am62xx-evm login: [ 13.953591] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:20:48.110 2025] [ 13.953624] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:20:48.117 2025] [ 13.953641] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.123 2025] [ 13.953689] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:20:48.129 2025] [ 13.953694] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:20:48.135 2025] [ 13.953701] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.142 2025] [ 13.953734] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:20:48.148 2025] [ 13.953739] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:20:48.155 2025] [ 13.953747] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.160 2025] [ 13.953782] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:20:48.165 2025] [ 13.953787] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:20:48.171 2025] [ 13.953794] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.177 2025] [ 13.953827] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:20:48.191 2025] [ 13.953832] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:20:48.200 2025] [ 13.953839] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.206 2025] [ 13.953872] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:20:48.207 2025] [ 13.953877] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:20:48.212 2025] [ 13.953884] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.220 2025] [ 13.953917] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:20:48.226 2025] [ 13.953922] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:20:48.236 2025] [ 13.953929] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.243 2025] [ 13.953962] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:20:48.248 2025] [ 13.953967] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:20:48.249 2025] [ 13.953973] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:48.621 2025] [ 14.470203] fpga_manager fpga0: writing CNC2_FC_A7_50T_CSG324_M3_BUS3.bin to Xilinx Slave Serial FPGA Manager [Fri Jan 03 14:20:51.913 2025] WARNING: The runtime version supported by this application is unavailable. [Fri Jan 03 14:20:51.913 2025] Using default runtime: v4.0.30319 [Fri Jan 03 14:20:53.712 2025] [ 19.560226] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:20:53.718 2025] [ 19.560249] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:20:53.724 2025] [ 19.560275] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.730 2025] [ 19.560326] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:20:53.736 2025] [ 19.560334] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:20:53.742 2025] [ 19.560341] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.749 2025] [ 19.560377] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:20:53.756 2025] [ 19.560382] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:20:53.761 2025] [ 19.560390] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.772 2025] [ 19.560428] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:20:53.778 2025] [ 19.560433] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:20:53.786 2025] [ 19.560441] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.792 2025] [ 19.560475] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:20:53.799 2025] [ 19.560482] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:20:53.804 2025] [ 19.560488] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.810 2025] [ 19.560522] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:20:53.816 2025] [ 19.560528] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:20:53.822 2025] [ 19.560535] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.828 2025] [ 19.560571] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:20:53.835 2025] [ 19.560576] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:20:53.842 2025] [ 19.560583] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.848 2025] [ 19.560619] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:20:53.854 2025] [ 19.560626] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:20:53.859 2025] [ 19.560632] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.865 2025] [ 19.648672] gpio gpiochip1: Persistence not supported for GPIO 7 [Fri Jan 03 14:20:53.871 2025] [ 19.648715] gpio gpiochip1: registered chardev handle for line 7 [Fri Jan 03 14:20:53.877 2025] [ 19.648748] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.885 2025] [ 19.648866] gpio gpiochip1: Persistence not supported for GPIO 8 [Fri Jan 03 14:20:53.890 2025] [ 19.648874] gpio gpiochip1: registered chardev handle for line 8 [Fri Jan 03 14:20:53.895 2025] [ 19.648903] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.902 2025] [ 19.648945] gpio gpiochip1: Persistence not supported for GPIO 9 [Fri Jan 03 14:20:53.908 2025] [ 19.648973] gpio gpiochip1: registered chardev handle for line 9 [Fri Jan 03 14:20:53.914 2025] [ 19.648982] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.919 2025] [ 19.649121] gpio gpiochip1: Persistence not supported for GPIO 10 [Fri Jan 03 14:20:53.925 2025] [ 19.649128] gpio gpiochip1: registered chardev handle for line 10 [Fri Jan 03 14:20:53.931 2025] [ 19.649137] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.938 2025] [ 19.649211] gpio gpiochip1: Persistence not supported for GPIO 11 [Fri Jan 03 14:20:53.945 2025] [ 19.649217] gpio gpiochip1: registered chardev handle for line 11 [Fri Jan 03 14:20:53.952 2025] [ 19.649242] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.957 2025] [ 19.649301] gpio gpiochip1: Persistence not supported for GPIO 12 [Fri Jan 03 14:20:53.963 2025] [ 19.649307] gpio gpiochip1: registered chardev handle for line 12 [Fri Jan 03 14:20:53.970 2025] [ 19.649314] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.975 2025] [ 19.649373] gpio gpiochip1: Persistence not supported for GPIO 13 [Fri Jan 03 14:20:53.982 2025] [ 19.649378] gpio gpiochip1: registered chardev handle for line 13 [Fri Jan 03 14:20:53.989 2025] [ 19.649386] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:20:53.995 2025] [ 19.649446] gpio gpiochip1: Persistence not supported for GPIO 14 [Fri Jan 03 14:20:54.002 2025] [ 19.649452] gpio gpiochip1: registered chardev handle for line 14 [Fri Jan 03 14:20:54.011 2025] [ 19.649460] gpio gpiochip1: registered chardev handle for 1 lines [Fri Jan 03 14:21:26.338 2025] [Fri Jan 03 14:21:26.339 2025] U-Boot SPL 2023.04-g7800cf88cc (Nov 27 2024 - 01:36:21 +0000) [Fri Jan 03 14:21:26.356 2025] SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.8--v09.01.08 (Kool Koala)') [Fri Jan 03 14:21:26.407 2025] SPL initial stack usage: 13384 bytes [Fri Jan 03 14:21:26.428 2025] Trying to boot from MMC1 [Fri Jan 03 14:21:26.601 2025] Authentication passed [Fri Jan 03 14:21:26.605 2025] Authentication passed [Fri Jan 03 14:21:26.610 2025] Authentication passed [Fri Jan 03 14:21:26.646 2025] Authentication passed [Fri Jan 03 14:21:26.652 2025] Authentication passed [Fri Jan 03 14:21:26.658 2025] Starting ATF on ARM64 core... [Fri Jan 03 14:21:26.660 2025] [Fri Jan 03 14:21:26.664 2025] NOTICE: