4.71> 4.71> SYSFW Firmware Version 9.2.7--v09.02.07 (Kool Koala) 4.71> SYSFW Firmware revision 0x9 4.71> SYSFW ABI revision 3.1 4.71> 4.71> flash driver rd test: ffffffff !!! 4.71> flash BOOT FROM A AREA 4.71> [BOOTLOADER_PROFILE] Boot Media : FLASH 4.71> [BOOTLOADER_PROFILE] Boot Media Clock : 200.000 MHz 4.71> [BOOTLOADER_PROFILE] Boot Image Size : 139 KB 4.71> [BOOTLOADER_PROFILE] Cores present : 4.71> r5f0-0 4.71> [BOOTLOADER PROFILE] System_init : 24316us 0.00> [BOOTLOADER PROFILE] Board_init : 0us 0.00> [BOOTLOADER PROFILE] Drivers_open : 192us 0.00> [BOOTLOADER PROFILE] Board_driversOpen : 9208us 0.00> [BOOTLOADER PROFILE] Sciclient Get Version : 10183us 0.00> [BOOTLOADER PROFILE] App_waitForMcuPbist : 5498us 0.00> [BOOTLOADER PROFILE] App_loadSelfcoreImage_A : 5225us 0.00> [BOOTLOADER_PROFILE] SBL Total Time Taken : 54625us 0.00> 0.00> Image loading done, switching to application ... 0.00> Starting MCU-r5f and 2nd stage bootloader 0.06> 0.06> SYSFW Firmware Version 9.2.7--v09.02.07 (Kool Koala) 0.06> SYSFW Firmware revision 0x9 0.06> SYSFW ABI revision 3.1 0.06> 0.06> Bootloader_parseMultiCoreAppImage 0 retry 0 0.18> [BOOTLOADER_PROFILE] Boot Media : FLASH 0.18> [BOOTLOADER_PROFILE] Boot Media Clock : 200.000 MHz 0.18> [BOOTLOADER_PROFILE] Boot Image Size : 1553 KB 0.18> [BOOTLOADER_PROFILE] Cores present : 0.18> mcu-r5f0-0 0.18> r5f0-0 0.18> a530-0 0.18> [BOOTLOADER PROFILE] System_init : 1822us 0.18> [BOOTLOADER PROFILE] Board_init : 1us 0.18> [BOOTLOADER PROFILE] Drivers_open : 303us 0.18> [BOOTLOADER PROFILE] Board_driversOpen : 35350us 0.18> [BOOTLOADER PROFILE] Sciclient Get Version : 10195us 0.18> [BOOTLOADER PROFILE] App_loadImages_A : 9940us 0.18> [BOOTLOADER PROFILE] App_loadSelfcoreImage : 8638us 0.18> [BOOTLOADER PROFILE] App_loadLinuxImages : 12408us 0.18> [BOOTLOADER_PROFILE] SBL Total Time Taken : 78661us 0.18> 0.18> Image loading done, switching to application ... 0.18> Starting linux and RTOS/Baremetal applications 0.18> NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty 0.18> NOTICE: BL31: Built : 16:09:05, Feb 9 2024 0.39> 0.39> U-Boot SPL 2023.04 (Mar 03 2025 - 07:42:08 +0000) 0.39> SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)') 0.39> am62a_init: board_init_f done 0.39> am62a_init: spl_boot_device: devstat = 0x273 bootmedia = 0x3 bootindex = 0 0.39> bootdev : 3 support boot device : 10 0.39> bootdev : 3 support boot device : 9 0.39> bootdev : 3 support boot device : 8 0.39> bootdev : 3 support boot device : 31 0.39> bootdev : 3 support boot device : 3 0.39> Trying to boot from MMC1 0.39> mmc_dev : 0 0.68> spl_mmc_boot_mode : 14, boot_device :3 0.68> boot_mode : 3 0.71> am62a_init: spl_boot_device: devstat = 0x273 bootmedia = 0x3 bootindex = 0 0.73> Authentication passed 1.23> am62a_init: spl_boot_device: devstat = 0x273 bootmedia = 0x3 bootindex = 0 1.25> Authentication passed 2.00> 2.00> 2.01> U-Boot 2023.04 (Aug 14 2025 - 09:26:05 +0000) 2.01> 2.01> SoC: AM62AX SR1.0 HS-SE 2.01> Model: Texas Instruments AM62A7 SK 2.31> DRAM: 1 GiB 2.37> Core: 58 devices, 28 uclasses, devicetree: separate 2.39> MMC: mmc@fa10000: 0, mmc@fa00000: 1 2.50> Loading Environment from MMC... *** Warning - bad CRC, using default environment 2.50> 2.50> In: serial@2800000 2.57> Out: serial@2800000 2.57> Err: serial@2800000 2.59> Net: Could not get PHY for ethernet@8000000port@1: addr 0 2.59> am65_cpsw_nuss_port ethernet@8000000port@1: phy_connect() failed 2.59> No ethernet found. 2.59> 2.59> Looking for mmc device .. 2.59> Found (0x00000000bdebafa0) 2.59> successful_boot : 1 tries_remaining : 0 2.59> boot from MMC device=0 part (boot_a, dtbo_a, rootfs_a) 2.59> new bootargs : console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk0p6 ro rootfstype=ext4 rootwait quiet loglevel=0 2.59> dtbo_a: block start = 0x40c00, all size : 2048, block size = 512 2.60> boot_a: block start = 0xc00, all size : 131072, block size = 512 2.96> boot addr : 0x82200000 dtbo addr : 0x82000000 2.96> ## Flattened Device Tree blob at 82000000 2.96> Booting using the fdt blob at 0x82000000 2.96> Working FDT set to 82000000 3.01> Loading Device Tree to 000000008ffee000, end 000000008ffff6b1 ... OK 3.01> Working FDT set to 8ffee000 3.03> 3.03> Starting kernel ... 3.03> 3.06> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 3.06> [ 0.000000] Linux version 6.1.80 (desaysv@6474e53d67b7) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Aug 13 03:55:56 CST 2025 3.07> [ 0.000000] Machine model: Texas Instruments AM62A7 SK 3.07> [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') 3.07> [ 0.000000] printk: bootconsole [ns16550a0] enabled 7.56> [FAILED] Failed to start Load/Save OS Random Seed. 8.04> [FAILED] Failed to start Load Audit Rules. 8.04> [DEPEND] Dependency failed for Security Audit Logging Service. 8.37> [FAILED] Failed to start Network Time Synchronization. 8.51> [FAILED] Failed to start Network Time Synchronization. 8.67> [FAILED] Failed to start Network Time Synchronization. 8.82> [FAILED] Failed to start Network Time Synchronization. 8.98> [FAILED] Failed to start Network Time Synchronization. 9.01> [FAILED] Failed to start Network Time Synchronization. 9.23> [SVP] SVP_VERSION :01.DB_250813_A1 9.25> [SVP] SVP_BUILD_DATE :2025-08-13 9.25> [SVP] Customer_version :SWX0DB 9.25> [SVP] Starting ... 9.39> [svp.app-proxy] created. 9.40> [SVP] Starting Service - "svp.svc.remote" 9.42> Valid program name found:svp.svc.remote. 9.46> [6307] (425|0xFFFF9D8D0020) [log.c(190)] sync_log_conf_file[INFO] sync_log_conf_file start 9.48> [6310] (425|0xFFFF9D8D0020) [log.c(207)] [INFO] MD5 values match. 9.50> 9.50> [6310] (425|0xFFFF9D8D0020) [log.c(224)] sync_log_conf_file[INFO] sync_log_conf_file end 9.50> [6311] (425|0xFFFF9D8D0020) [log.c(558)] [INFO] _level = 1 (INFO) 9.51> [6311] (425|0xFFFF9D8D0020) [INFO] [svcfw][SVPServiceFw_Main.cpp: 27]main() - Begin 9.51> Created endpoint device [rpmsg-char-0-425], fd = [5] port = [1025] 9.51> [SVP] Starting Service - "svp.svc.log" 9.53> Valid program name found:svp.svc.log. 9.57> [6403] (432|0xFFFFA80B0440) [log.c(190)] sync_log_conf_file[INFO] sync_log_conf_file start 9.59> [6403] (432|0xFFFFA80B0440) [log.c(207)] [INFO] MD5 values match. 9.59> 9.59> [6403] (432|0xFFFFA80B0440) [log.c(224)] sync_log_conf_file[INFO] sync_log_conf_file end 9.59> [6403] (432|0xFFFFA80B0440) [log.c(558)] [INFO] _level = 1 (INFO) 9.60> [6403] (432|0xFFFFA80B0440) [log.c(1144)] [INFO] file exists and already initialized 9.60> log init date:20250214, index:1 9.60> [6405] (432|0xFFFFA80B0440) [INFO] [svcfw][SVPServiceFw_Main.cpp: 27]main() - Begin 9.60> Register remote service end 9.62> [SVP] Starting Service - "svp.svc.update" 9.62> Valid program name found:svp.svc.update. 9.67> [6502] (455|0xFFFF931F5B60) [log.c(190)] sync_log_conf_file[INFO] sync_log_conf_file start 9.68> [6503] (455|0xFFFF931F5B60) [log.c(207)] [INFO] MD5 values match. 9.68> 9.68> [6503] (455|0xFFFF931F5B60) [log.c(224)] sync_log_conf_file[INFO] sync_log_conf_file end 9.68> [6503] (455|0xFFFF931F5B60) [log.c(558)] [INFO] _level = 1 (INFO) 9.70> [6503] (455|0xFFFF931F5B60) [log.c(1144)] [INFO] file exists and already initialized 9.70> [6503] (455|0xFFFF931F5B60) [INFO] [svcfw][SVPServiceFw_Main.cpp: 27]main() - Begin 9.70> [SVP] Starting App - "sva-dms" 9.71> [SVP] Start application end - svp.util.procguard /sva/BatDMS/sva-dms --debug-output none 9.73> Valid program name found:/sva/BatDMS/sva-dms. 9.87> EDGEAI_DATA_PATH Not Defined!! 9.89> [6699] (469|0xFFFF92DC6440) [log.c(190)] sync_log_conf_file[INFO] sync_log_conf_file start 9.90> [6700] (469|0xFFFF92DC6440) [log.c(207)] [INFO] MD5 values match. 9.90> 9.90> [6700] (469|0xFFFF92DC6440) [log.c(224)] sync_log_conf_file[INFO] sync_log_conf_file end 9.90> [6700] (469|0xFFFF92DC6440) [log.c(558)] [INFO] _level = 1 (INFO) 9.90> [6700] (469|0xFFFF92DC6440) [log.c(1144)] [INFO] file exists and already initialized 9.90> [6701] (469|0xFFFF92DC6440) [INFO] [default][main.cpp: 20]sva-dms debug-output = none 9.90> [6730] (469|0xFFFF92DC6440) [SVPAppSignal.cpp(182)] SVPAppSignal::Init:debug_flag_exist_[0] 10.32> Register remote service end 10.39> WARNING: Drowsiness level threshold gaps are recommended to be higher than 20.000000 for better performance. 10.51> 10.56> _____ _____ _ _ 10.56> | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ 10.57> | | _| .'| . | . | | __| _| . | | | -_| _| _| 10.59> |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| 10.59> |___| |___| 10.59> 10.59> Arago Project am62axx-evm ttyS2 10.59> 10.59> Arago 2023.10 am62axx-evm ttyS2 10.59> 10.76> am62axx-evm login: tar: Removing leading `/' from member names 12.10> [ 8.963544] write_WDGRegister.sh[376]: Read /log/HW_WDG_status.txt file... 13.10> [ 9.969408] write_WDGRegister.sh[376]: WDGRegister write start... 13.12> [ 9.987336] write_WDGRegister.sh[376]: get 0x48 0x32 value: 0x20 14.20> [ 11.019719] write_WDGRegister.sh[376]: get 0x12 0x03 value: 0x7f 14.21> [ 11.022317] write_WDGRegister.sh[376]: get 0x12 0x04 value: 0x7f 14.21> [ 11.030511] write_WDGRegister.sh[376]: get 0x12 0x05 value: 0x89 14.21> [ 11.045510] write_WDGRegister.sh[376]: get 0x12 0x06 value: 0x00 14.21> [ 11.060995] write_WDGRegister.sh[376]: /log/HW_WDG_status.txt value: 0 14.21> [ 11.076917] write_WDGRegister.sh[376]: get 0x12 0x09 value: 0xff 14.23> [ 11.098932] write_WDGRegister.sh[376]: WDGRegister write done. 16.85< 16.87> 16.87> am62axx-evm login: 18.67< root 18.68> am62axx-evm login: root 23.09< DSM_8iT8xWrauRjt4kb65ilvmne/3+yPP6co 23.12> Password: 24.42< DSM_8iT8xWrauRjt4kb65ilvmne/3+yPP6co 24.45> 78M_8iT8xWrauRjt4kb65ilvmnroot@am62axx-evm:~# M_8iT8xWrauRjt4kb65ilvmne/3+yPP6co 24.46> -sh: M_8iT8xWrauRjt4kb65ilvmne/3+yPP6co: No such file or directory 24.48> root@am62axx-evm:~# 28.64< dmesg 28.65> root@am62axx-evm:~# dmesg 29.00> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] 29.01> [ 0.000000] Linux version 6.1.80 (desaysv@6474e53d67b7) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Aug 13 03:55:56 CST 2025 29.03> [ 0.000000] Machine model: Texas Instruments AM62A7 SK 29.03> [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') 29.03> [ 0.000000] printk: bootconsole [ns16550a0] enabled 29.03> [ 0.000000] efi: UEFI not found. 29.04> [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000bd000000, size 48 MiB 29.04> [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool 29.04> [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b800000, size 1 MiB 29.04> [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9b800000, compatible id shared-dma-pool 29.04> [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009b900000, size 15 MiB 29.04> [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9b900000, compatible id shared-dma-pool 29.04> [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 1 MiB 29.04> [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9c800000, compatible id shared-dma-pool 29.04> [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c900000, size 30 MiB 29.04> [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9c900000, compatible id shared-dma-pool 29.04> [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 32 MiB 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai-dma-memory@a1000000, compatible id shared-dma-pool 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_shared-memories, compatible id dma-heap-carveout 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_license-memories@aa000000, compatible id dma-heap-carveout 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_update-memories@aa100000, compatible id dma-heap-carveout 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_canLog-memories@aa300000, compatible id dma-heap-carveout 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_buffuer1-memories@aa800000, compatible id dma-heap-carveout 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai_buffuer2-memories@aa900000, compatible id dma-heap-carveout 29.06> [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ae000000, size 32 MiB 29.06> [ 0.000000] OF: reserved mem: initialized node edgeai-core-heap-memory@ae000000, compatible id shared-dma-pool 29.06> [ 0.000000] Zone ranges: 29.06> [ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff] 29.06> [ 0.000000] DMA32 empty 29.06> [ 0.000000] Normal empty 29.06> [ 0.000000] Movable zone start for each node 29.06> [ 0.000000] Early memory node ranges 29.06> [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009b7fffff] 29.06> [ 0.000000] node 0: [mem 0x000000009b800000-0x000000009e6fffff] 29.06> [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] 29.06> [ 0.000000] node 0: [mem 0x000000009e780000-0x00000000a2ffffff] 29.06> [ 0.000000] node 0: [mem 0x00000000a3000000-0x00000000adffffff] 29.06> [ 0.000000] node 0: [mem 0x00000000ae000000-0x00000000afffffff] 29.06> [ 0.000000] node 0: [mem 0x00000000b0000000-0x00000000bfffffff] 29.06> [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] 29.06> [ 0.000000] psci: probing for conduit method from DT. 29.06> [ 0.000000] psci: PSCIv1.1 detected in firmware. 29.06> [ 0.000000] psci: Using standard PSCI v0.2 function IDs 29.06> [ 0.000000] psci: Trusted OS migration not required 29.06> [ 0.000000] psci: SMC Calling Convention v1.4 29.06> [ 0.000000] percpu: Embedded 20 pages/cpu s41064 r8192 d32664 u81920 29.07> [ 0.000000] pcpu-alloc: s41064 r8192 d32664 u81920 alloc=20*4096 29.07> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 29.07> [ 0.000000] Detected VIPT I-cache on CPU0 29.35> [ 0.000000] CPU features: detected: GIC system register CPU interface 29.35> [ 0.000000] CPU features: detected: ARM erratum 845719 29.37> [ 0.000000] alternatives: applying boot alternatives 29.37> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 29.37> [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=/dev/mmcblk0p6 ro rootfstype=ext4 rootwait quiet loglevel=0 29.37> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 29.37> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) 29.39> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off 29.39> [ 0.000000] Memory: 693844K/1048576K available (11648K kernel code, 1258K rwdata, 3808K rodata, 2048K init, 454K bss, 305580K reserved, 49152K cma-reserved) 29.39> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 29.39> [ 0.000000] rcu: Preemptible hierarchical RCU implementation. 29.39> [ 0.000000] rcu: RCU event tracing is enabled. 29.39> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. 29.39> [ 0.000000] Trampoline variant of Tasks RCU enabled. 29.39> [ 0.000000] Tracing variant of Tasks RCU enabled. 29.39> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. 29.39> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 29.39> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 29.39> [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode 29.39> [ 0.000000] GICv3: 256 SPIs implemented 29.39> [ 0.000000] GICv3: 0 Extended SPIs implemented 29.39> [ 0.000000] Root IRQ handler: gic_handle_irq 29.39> [ 0.000000] GICv3: GICv3 features: 16 PPIs 29.39> [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 29.39> [ 0.000000] ITS [mem 0x01820000-0x0182ffff] 29.39> [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS 29.39> [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 29.39> [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) 29.40> [ 0.000000] ITS: using cache flushing for cmd queue 29.40> [ 0.000000] GICv3: using LPI property table @0x0000000080040000 29.40> [ 0.000000] GIC: using cache flushing for LPI property table 29.40> [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000 29.40> [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. 29.40> [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). 29.40> [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns 29.40> [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns 29.40> [ 0.000292] Console: colour dummy device 80x25 29.40> [ 0.000337] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) 29.40> [ 0.000348] pid_max: default: 32768 minimum: 301 29.40> [ 0.000393] LSM: Security Framework initializing 29.40> [ 0.000429] SELinux: Initializing. 29.40> [ 0.000532] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 29.40> [ 0.000544] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) 29.40> [ 0.002040] cblist_init_generic: Setting adjustable number of callback queues. 29.40> [ 0.002055] cblist_init_generic: Setting shift to 2 and lim to 1. 29.40> [ 0.002121] cblist_init_generic: Setting adjustable number of callback queues. 29.42> [ 0.002125] cblist_init_generic: Setting shift to 2 and lim to 1. 29.42> [ 0.002264] rcu: Hierarchical SRCU implementation. 29.42> [ 0.002269] rcu: Max phase no-delay instances is 1000. 29.42> [ 0.002473] Platform MSI: msi-controller@1820000 domain created 29.42> [ 0.002661] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created 29.42> [ 0.002889] EFI services will not be available. 29.42> [ 0.003127] smp: Bringing up secondary CPUs ... 29.42> [ 0.003698] Detected VIPT I-cache on CPU1 29.70> [ 0.003784] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 29.70> [ 0.003801] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000 29.71> [ 0.003849] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] 29.71> [ 0.004500] Detected VIPT I-cache on CPU2 29.71> [ 0.004568] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 29.71> [ 0.004582] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000 29.71> [ 0.004614] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] 29.71> [ 0.005167] Detected VIPT I-cache on CPU3 29.71> [ 0.005231] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 29.73> [ 0.005244] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000 29.73> [ 0.005274] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] 29.73> [ 0.005332] smp: Brought up 1 node, 4 CPUs 29.73> [ 0.005347] SMP: Total of 4 processors activated. 29.73> [ 0.005352] CPU features: detected: 32-bit EL0 Support 29.73> [ 0.005356] CPU features: detected: CRC32 instructions 29.73> [ 0.005407] CPU: All CPU(s) started at EL2 29.73> [ 0.005411] alternatives: applying system-wide alternatives 29.73> [ 0.006688] devtmpfs: initialized 29.73> [ 0.014098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 29.73> [ 0.014128] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 29.73> [ 0.015763] pinctrl core: initialized pinctrl subsystem 29.73> [ 0.016351] DMI not present or invalid. 29.73> [ 0.016901] NET: Registered PF_NETLINK/PF_ROUTE protocol family 29.73> [ 0.017826] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 29.73> [ 0.018015] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 29.73> [ 0.018094] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 29.73> [ 0.018155] audit: initializing netlink subsys (disabled) 29.73> [ 0.018291] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 29.73> [ 0.018695] thermal_sys: Registered thermal governor 'step_wise' 29.73> [ 0.018700] thermal_sys: Registered thermal governor 'power_allocator' 29.73> [ 0.018740] cpuidle: using governor menu 29.73> [ 0.018882] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 29.75> [ 0.018966] ASID allocator initialised with 65536 entries 29.75> [ 0.030599] KASLR disabled due to lack of seed 29.75> [ 0.036749] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages 29.75> [ 0.036763] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page 29.75> [ 0.036768] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages 29.75> [ 0.036772] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page 29.75> [ 0.036777] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages 29.75> [ 0.036781] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page 29.75> [ 0.036786] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages 29.75> [ 0.036790] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page 29.75> [ 0.038035] k3-chipinfo 43000014.chipid: Family:AM62AX rev:SR1.0 JTAGID[0x0bb8d02f] Detected 29.75> [ 0.039622] iommu: Default domain type: Translated 29.75> [ 0.039636] iommu: DMA domain TLB invalidation policy: strict mode 29.75> [ 0.039886] SCSI subsystem initialized 29.75> [ 0.040035] libata version 3.00 loaded. 29.75> [ 0.040230] usbcore: registered new interface driver usbfs 29.75> [ 0.040268] usbcore: registered new interface driver hub 29.75> [ 0.040296] usbcore: registered new device driver usb 29.76> [ 0.040674] pps_core: LinuxPPS API ver. 1 registered 29.76> [ 0.040680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 29.76> [ 0.040692] PTP clock support registered 29.76> [ 0.040813] EDAC MC: Ver: 3.0.0 29.76> [ 0.041590] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fca100 29.76> [ 0.041737] omap-mailbox 29010000.mailbox: omap mailbox rev 0x66fca100 29.76> [ 0.041867] omap-mailbox 29020000.mailbox: omap mailbox rev 0x66fca100 29.76> [ 0.041925] omap-mailbox 29030000.mailbox: no available mbox devices found 29.76> [ 0.042229] FPGA manager framework 30.03> [ 0.043093] clocksource: Switched to clocksource arch_sys_counter 30.04> [ 0.043291] VFS: Disk quotas dquot_6.6.0 30.04> [ 0.043324] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 30.04> [ 0.049140] Carveout Heap: Exported 100 MiB at 0x00000000a3000000 30.04> [ 0.049252] Carveout Heap: Exported 1 MiB at 0x00000000aa000000 30.04> [ 0.049340] Carveout Heap: Exported 2 MiB at 0x00000000aa100000 30.04> [ 0.049436] Carveout Heap: Exported 5 MiB at 0x00000000aa300000 30.06> [ 0.049524] Carveout Heap: Exported 0 MiB at 0x00000000aa800000 30.06> [ 0.049606] Carveout Heap: Exported 0 MiB at 0x00000000aa900000 30.06> [ 0.049704] NET: Registered PF_INET protocol family 30.06> [ 0.049856] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) 30.06> [ 0.050884] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) 30.06> [ 0.050952] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) 30.07> [ 0.050965] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) 30.07> [ 0.051025] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) 30.07> [ 0.051263] TCP: Hash tables configured (established 8192 bind 8192) 30.07> [ 0.051389] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) 30.07> [ 0.051419] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 30.07> [ 0.051581] NET: Registered PF_UNIX/PF_LOCAL protocol family 30.07> [ 0.051941] RPC: Registered named UNIX socket transport module. 30.07> [ 0.051949] RPC: Registered udp transport module. 30.07> [ 0.051952] RPC: Registered tcp transport module. 30.07> [ 0.051956] RPC: Registered tcp NFSv4.1 backchannel transport module. 30.07> [ 0.051963] NET: Registered PF_XDP protocol family 30.07> [ 0.051978] PCI: CLS 0 bytes, default 64 30.07> [ 0.052712] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available 30.07> [ 0.054180] Initialise system trusted keyrings 30.07> [ 0.054386] workingset: timestamp_bits=46 max_order=18 bucket_order=0 30.07> [ 0.058760] squashfs: version 4.0 (2009/01/31) Phillip Lougher 30.07> [ 0.059334] NFS: Registering the id_resolver key type 30.07> [ 0.059371] Key type id_resolver registered 30.07> [ 0.059376] Key type id_legacy registered 30.07> [ 0.059431] nfs4filelayout_init: NFSv4 File Layout Driver Registering... 30.07> [ 0.059437] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... 30.07> [ 0.094709] Key type asymmetric registered 30.07> [ 0.094723] Asymmetric key parser 'x509' registered 30.07> [ 0.094780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) 30.07> [ 0.094940] io scheduler mq-deadline registered 30.07> [ 0.094946] io scheduler kyber registered 30.07> [ 0.097927] pinctrl-single 4084000.pinctrl: 34 pins, size 136 30.07> [ 0.098545] pinctrl-single f4000.pinctrl: 151 pins, size 604 30.07> [ 0.104939] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled 30.07> [ 0.113892] loop: module loaded 30.07> [ 0.115072] megasas: 07.719.03.00-rc1 30.07> [ 0.117759] tun: Universal TUN/TAP device driver, 1.6 30.07> [ 0.118436] VFIO - User Level meta-driver version: 0.3 30.07> [ 0.119133] usbcore: registered new interface driver usb-storage 30.07> [ 0.119633] i2c_dev: i2c /dev entries driver 30.07> [ 0.120885] sdhci: Secure Digital Host Controller Interface driver 30.07> [ 0.120894] sdhci: Copyright(c) Pierre Ossman 30.09> [ 0.121088] sdhci-pltfm: SDHCI platform and OF driver helper 30.09> [ 0.121650] ledtrig-cpu: registered to indicate activity on CPUs 30.09> [ 0.121806] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... 30.09> [ 0.122147] usbcore: registered new interface driver usbhid 30.09> [ 0.122152] usbhid: USB HID core driver 30.09> [ 0.122933] optee: probing for conduit method. 30.09> [ 0.122965] optee: revision 4.1 (012cdca4) 30.09> [ 0.123302] optee: dynamic shared memory is enabled 30.09> [ 0.123657] optee: initialized driver 30.09> [ 0.124517] Initializing XFRM netlink socket 30.09> [ 0.124552] NET: Registered PF_PACKET protocol family 30.09> [ 0.124623] Key type dns_resolver registered 30.09> [ 0.124989] registered taskstats version 1 30.39> [ 0.125011] Loading compiled-in X.509 certificates 30.39> [ 0.132793] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)') 30.40> [ 0.168502] i2c 0-0048: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/pmic@48/regulators/buck5 30.40> [ 0.168904] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz 30.40> [ 0.170002] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz 30.40> [ 0.170663] omap_i2c 20020000.i2c: bus 2 rev0.12 at 400 kHz 30.40> [ 0.170857] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created 30.40> [ 0.170979] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created 30.40> [ 0.171197] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created 30.40> [ 0.171462] ti-sci-inta 4e0a0000.interrupt-controller: Interrupt Aggregator domain 200 created 30.40> [ 0.172760] ti-udma 485c0100.dma-controller: Number of rings: 82 30.40> [ 0.174657] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18) 30.40> [ 0.176967] ti-udma 485c0000.dma-controller: Number of rings: 150 30.40> [ 0.180533] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) 30.42> [ 0.182282] ti-udma 4e230000.dma-controller: Number of rings: 6 30.42> [ 0.182704] ti-udma 4e230000.dma-controller: Channels: 6 (bchan: 0, tchan: 0, rchan: 6) 30.42> [ 0.183812] printk: console [ttyS2] disabled 30.42> [ 0.183875] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 253, base_baud = 3000000) is a 8250 30.42> [ 0.183946] printk: console [ttyS2] enabled 30.42> [ 0.183952] printk: bootconsole [ns16550a0] disabled 30.42> [ 0.186456] mmc0: CQHCI version 5.10 30.42> [ 0.186598] mmc1: CQHCI version 5.10 30.42> [ 0.227148] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit 30.42> [ 0.292112] mmc0: Command Queue Engine enabled 30.42> [ 0.292133] mmc0: new HS200 MMC card at address 0001 30.42> [ 0.292631] mmcblk0: mmc0:0001 8GUF4R 7.28 GiB 30.42> [ 0.294556] Alternate GPT is invalid, using primary GPT. 30.42> [ 0.294609] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 30.42> [ 0.296815] mmcblk0boot0: mmc0:0001 8GUF4R 31.9 MiB 30.42> [ 0.297713] mmcblk0boot1: mmc0:0001 8GUF4R 31.9 MiB 30.42> [ 0.298586] mmcblk0rpmb: mmc0:0001 8GUF4R 4.00 MiB, chardev (240:0) 30.42> [ 0.299139] sdhci-am654 fa00000.mmc: Power on failed 30.42> [ 0.329737] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit 30.42> [ 0.530783] vddshv_sdio: Bringing 1800000uV into 3300000-3300000uV 30.42> [ 0.532435] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! 30.42> [ 0.533991] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! 30.42> [ 0.534007] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! 30.42> [ 0.543897] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Quota mode: none. 30.43> [ 0.543984] VFS: Mounted root (ext4 filesystem) readonly on device 179:6. 30.43> [ 0.545922] devtmpfs: mounted 30.43> [ 0.546568] Freeing unused kernel memory: 2048K 30.43> [ 0.555170] Run /sbin/init as init process 30.43> [ 0.555181] with arguments: 30.43> [ 0.555183] /sbin/init 30.43> [ 0.555186] with environment: 30.43> [ 0.555188] HOME=/ 30.43> [ 0.555191] TERM=linux 30.43> [ 0.661792] audit: type=1404 audit(0.656:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 30.43> [ 0.843664] SELinux: policy capability network_peer_controls=1 30.43> [ 0.843690] SELinux: policy capability open_perms=1 30.43> [ 0.843694] SELinux: policy capability extended_socket_class=1 30.43> [ 0.843698] SELinux: policy capability always_check_network=0 30.43> [ 0.843701] SELinux: policy capability cgroup_seclabel=1 30.43> [ 0.843704] SELinux: policy capability nnp_nosuid_transition=1 30.43> [ 0.843707] SELinux: policy capability genfs_seclabel_symlinks=0 30.43> [ 0.843711] SELinux: policy capability ioctl_skip_cloexec=0 30.43> [ 0.895199] audit: type=1403 audit(0.892:3): auid=4294967295 ses=4294967295 lsm=selinux res=1 30.73> [ 0.903294] systemd[1]: Successfully loaded SELinux policy in 242.581ms. 30.73> [ 0.979294] systemd[1]: System time before build time, advancing clock. 30.73> [ 1.129242] systemd[1]: Relabeled /dev, /dev/shm, /run, /sys/fs/cgroup in 107.650ms. 30.73> [ 1.153779] systemd[1]: systemd 255.13^ running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 30.73> [ 1.153913] systemd[1]: Detected architecture arm64. 30.73> [ 1.161774] systemd[1]: Hostname set to . 30.73> [ 1.275983] systemd-sysv-generator[149]: SysV service '/etc/init.d/write_WDGRegister.sh' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. ! 30.73> [ 1.548806] systemd[1]: Configuration file /usr/lib/systemd/system/svp-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. 30.75> [ 1.552407] systemd[1]: Configuration file /usr/lib/systemd/system/slot-mount.service is marked executable. Please remove executable permission bits. Proceeding anyway. 30.75> [ 1.586686] systemd[1]: Queued start job for default target Graphical Interface. 30.76> [ 1.612816] systemd[1]: Created slice Slice /system/getty. 30.76> [ 1.616351] systemd[1]: Created slice Slice /system/modprobe. 30.76> [ 1.618492] systemd[1]: Created slice Slice /system/serial-getty. 30.76> [ 1.619811] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. 30.76> [ 1.620634] systemd[1]: Started Forward Password Requests to Wall Directory Watch. 30.76> [ 1.620793] systemd[1]: Expecting device /dev/mmcblk0p14... 30.76> [ 1.620833] systemd[1]: Expecting device /dev/mmcblk0p15... 30.76> [ 1.620871] systemd[1]: Expecting device /dev/mmcblk0p16... 30.76> [ 1.620902] systemd[1]: Expecting device /dev/mmcblk0p17... 30.76> [ 1.620930] systemd[1]: Expecting device /dev/mmcblk0p18... 30.76> [ 1.620959] systemd[1]: Expecting device /dev/ttyS2... 30.76> [ 1.621124] systemd[1]: Reached target Path Units. 30.76> [ 1.621200] systemd[1]: Reached target Remote File Systems. 30.76> [ 1.621258] systemd[1]: Reached target Slice Units. 30.76> [ 1.621332] systemd[1]: Reached target Swaps. 30.76> [ 1.630522] systemd[1]: Listening on Process Core Dump Socket. 30.76> [ 1.631683] systemd[1]: Listening on initctl Compatibility Named Pipe. 30.76> [ 1.634361] systemd[1]: Listening on Journal Audit Socket. 30.76> [ 1.637531] systemd[1]: Listening on Journal Socket (/dev/log). 30.76> [ 1.639173] systemd[1]: Listening on Journal Socket. 30.76> [ 1.644582] systemd[1]: Listening on udev Control Socket. 30.76> [ 1.645985] systemd[1]: Listening on udev Kernel Socket. 30.76> [ 1.648298] systemd[1]: Listening on User Database Manager Socket. 30.78> [ 1.691510] systemd[1]: Mounting Huge Pages File System... 30.78> [ 1.698433] systemd[1]: Mounting POSIX Message Queue File System... 30.78> [ 1.705137] systemd[1]: Mounting Kernel Debug File System... 30.78> [ 1.705747] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 30.78> [ 1.713594] systemd[1]: Mounting Temporary Directory /tmp... 30.78> [ 1.721883] systemd[1]: Starting Create List of Static Device Nodes... 30.78> [ 1.730670] systemd[1]: Starting Load Kernel Module configfs... 30.78> [ 1.738397] systemd[1]: Starting Load Kernel Module fuse... 30.78> [ 1.756553] systemd[1]: Starting SELinux autorelabel service loading... 30.78> [ 1.763875] systemd[1]: Starting SELinux init for /dev service loading... 30.78> [ 1.776305] systemd[1]: Started slot-mount Service. 30.78> [ 1.788477] systemd[1]: Starting Journal Service... 31.07> [ 1.789976] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. 31.07> [ 1.796692] systemd[1]: Starting Remount Root and Kernel File Systems... 31.09> [ 1.800960] fuse: init (API version 7.37) 31.09> [ 1.803530] systemd[1]: Starting Apply Kernel Variables... 31.09> [ 1.811234] systemd[1]: Starting Coldplug All udev Devices... 31.09> [ 1.821396] systemd[1]: Mounted Huge Pages File System. 31.09> [ 1.822570] systemd[1]: Mounted POSIX Message Queue File System. 31.09> [ 1.822638] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Quota mode: none. 31.09> [ 1.831555] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Quota mode: none. 31.09> [ 1.847662] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Quota mode: none. 31.09> [ 1.869931] systemd[1]: Mounted Kernel Debug File System. 31.10> [ 1.871529] systemd[1]: Mounted Temporary Directory /tmp. 31.10> [ 1.874747] systemd[1]: Finished Create List of Static Device Nodes. 31.10> [ 1.877987] systemd[1]: modprobe@configfs.service: Deactivated successfully. 31.10> [ 1.879540] systemd[1]: Finished Load Kernel Module configfs. 31.10> [ 1.883582] systemd[1]: modprobe@fuse.service: Deactivated successfully. 31.10> [ 1.885389] systemd[1]: Finished Load Kernel Module fuse. 31.10> [ 1.891429] systemd[1]: selinux-autorelabel.service: Deactivated successfully. 31.10> [ 1.892712] systemd[1]: Finished SELinux autorelabel service loading. 31.10> [ 1.895328] systemd[1]: slot-mount.service: Deactivated successfully. 31.10> [ 1.946576] systemd[1]: Mounting FUSE Control File System... 31.10> [ 1.954636] systemd[1]: Mounting Kernel Configuration File System... 31.10> [ 1.972535] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... 31.10> [ 2.005459] systemd[1]: Finished Remount Root and Kernel File Systems. 31.10> [ 2.013098] systemd[1]: Mounted FUSE Control File System. 31.10> [ 2.046074] systemd[1]: Mounted Kernel Configuration File System. 31.10> [ 2.049051] systemd[1]: Finished Apply Kernel Variables. 31.10> [ 2.051838] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). 31.10> [ 2.061577] systemd-journald[162]: Collecting audit messages is enabled. 31.10> [ 2.129485] systemd[1]: Started Journal Service. 31.10> [ 2.130295] audit: type=1130 audit(1728487093.144:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.10> [ 2.247033] systemd-journald[162]: Received client request to flush runtime journal. 31.10> [ 2.247513] systemd-journald[162]: Failed to open system journal: Permission denied 31.10> [ 2.255567] audit: type=1130 audit(1728487093.272:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.10> [ 2.293796] audit: type=1130 audit(1728487093.304:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev-early comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.10> [ 2.324702] audit: type=1130 audit(1728487093.340:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=selinux-labeldev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.10> [ 2.324894] audit: type=1131 audit(1728487093.340:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=selinux-labeldev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.10> [ 2.482802] audit: type=1130 audit(1728487093.496:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.12> [ 2.487000] audit: type=1334 audit(1728487093.500:10): prog-id=6 op=LOAD 31.42> [ 3.345935] random: crng init done 31.43> [ 3.347353] mc: Linux media interface: v0.10 31.43> [ 3.385079] videodev: Linux video capture interface: v2.00 31.45> [ 3.423770] === ox02c10_power_on 31.45> [ 3.443406] k3-dsp-rproc 7e000000.dsp: device does not reserved memory regions, ret = -22 31.45> [ 3.443438] k3-dsp-rproc 7e000000.dsp: reserved memory init failed, ret = -22 31.45> [ 3.443531] remoteproc remoteproc0: releasing 7e000000.dsp 31.45> [ 3.443551] k3-dsp-rproc: probe of 7e000000.dsp failed with error -22 31.45> [ 3.483358] === ox02c10_power_on max96714 is locked, loops:0 31.45> [ 3.485236] === ox02c10_power_off 31.45> [ 3.506225] platform 79000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) 31.45> [ 3.509120] vdec 30210000.video-codec: error -ENXIO: IRQ index 0 not found 31.45> [ 3.509146] vdec 30210000.video-codec: failed to get irq resource, falling back to polling 31.45> [ 3.509673] platform 79000000.r5f: configured R5F for IPC-only mode 31.45> [ 3.509825] platform 79000000.r5f: assigned reserved memory node r5f-dma-memory@9b800000 31.45> [ 3.526067] remoteproc remoteproc0: 79000000.r5f is available 31.45> [ 3.526203] remoteproc remoteproc0: attaching to 79000000.r5f 31.45> [ 3.560027] platform 79000000.r5f: R5F core initialized in IPC-only mode 31.45> [ 3.560062] rproc-virtio rproc-virtio.5.auto: assigned reserved memory node r5f-dma-memory@9b800000 31.45> [ 3.574345] rproc-virtio rproc-virtio.5.auto: registered virtio0 (type 7) 31.45> [ 3.574370] remoteproc remoteproc0: remote processor 79000000.r5f is now attached 31.45> [ 3.597914] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) 31.45> [ 3.599877] platform 78000000.r5f: configured R5F for IPC-only mode 31.45> [ 3.600038] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9c800000 31.45> [ 3.600586] remoteproc remoteproc1: 78000000.r5f is available 31.45> [ 3.600706] remoteproc remoteproc1: attaching to 78000000.r5f 31.45> [ 3.601233] platform 78000000.r5f: R5F core initialized in IPC-only mode 31.45> [ 3.601258] rproc-virtio rproc-virtio.6.auto: assigned reserved memory node r5f-dma-memory@9c800000 31.45> [ 3.603399] rproc-virtio rproc-virtio.6.auto: registered virtio1 (type 7) 31.45> [ 3.603422] remoteproc remoteproc1: remote processor 78000000.r5f is now attached 31.45> [ 3.607354] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 31.45> [ 3.607406] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4) 31.45> [ 3.608496] systemd-journald[162]: Time jumped backwards, rotating. 31.45> [ 3.633860] e5010 fd20000.e5010: Device registered as /dev/video2 31.45> [ 3.783259] EXT4-fs (mmcblk0p16): warning: maximal mount count reached, running e2fsck is recommended 31.45> [ 3.787680] EXT4-fs (mmcblk0p16): recovery complete 31.45> [ 3.788849] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Quota mode: none. 31.45> [ 3.836521] EXT4-fs (mmcblk0p17): warning: maximal mount count reached, running e2fsck is recommended 31.45> [ 3.838207] EXT4-fs (mmcblk0p17): recovery complete 31.45> [ 3.838261] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Quota mode: none. 31.45> [ 3.935305] EXT4-fs (mmcblk0p14): warning: maximal mount count reached, running e2fsck is recommended 31.45> [ 3.977542] EXT4-fs (mmcblk0p15): warning: maximal mount count reached, running e2fsck is recommended 31.45> [ 4.001705] EXT4-fs (mmcblk0p18): warning: maximal mount count reached, running e2fsck is recommended 31.45> [ 4.005739] EXT4-fs (mmcblk0p18): recovery complete 31.45> [ 4.006100] EXT4-fs (mmcblk0p14): recovery complete 31.45> [ 4.006356] EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Quota mode: none. 31.46> [ 4.008110] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Quota mode: none. 31.46> [ 4.036937] EXT4-fs (mmcblk0p15): recovery complete 31.46> [ 4.036984] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Quota mode: none. 31.76> [ 4.218011] ox02c 0-0010: Consider updating driver ox02c to match on endpoints 31.78> [ 4.221535] overlayfs: failed to create directory /var/volatile/.cache-work/work (errno: 13); mounting read-only 31.78> [ 4.221592] overlayfs: failed to create directory /var/volatile/.spool-work/work (errno: 13); mounting read-only 31.78> [ 4.225839] overlayfs: failed to create directory /var/volatile/.lib-work/work (errno: 13); mounting read-only 31.78> [ 4.225839] overlayfs: failed to create directory /var/volatile/.srv-work/work (errno: 13); mounting read-only 31.78> [ 4.245690] cdns-csi2rx 30101000.csi-bridge: Probed CSI2RX with 4/4 lanes, 4 streams, external D-PHY 31.78> [ 4.286283] virtio_rpmsg_bus virtio0: rpmsg host is online 31.78> [ 4.287188] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe 31.78> [ 4.287801] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd 31.78> [ 4.288027] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 31.79> [ 4.288150] virtio_rpmsg_bus virtio0: msg received with no recipient 31.79> [ 4.294033] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xe 31.79> [ 4.294218] virtio_rpmsg_bus virtio1: msg received with no recipient 31.79> [ 4.299373] virtio_rpmsg_bus virtio1: rpmsg host is online 31.79> [ 4.411443] overlayfs: failed to get metacopy (-13) 31.79> [ 4.411655] overlayfs: failed to get metacopy (-13) 31.79> [ 4.605182] SELinux: inode_doinit_use_xattr: getxattr returned 13 for dev=overlay ino=3826 31.79> [ 4.605331] SELinux: inode_doinit_use_xattr: getxattr returned 13 for dev=overlay ino=3826 31.79> [ 4.641424] SELinux: inode_doinit_use_xattr: getxattr returned 13 for dev=overlay ino=3826 31.79> [ 4.643934] SELinux: inode_doinit_use_xattr: getxattr returned 13 for dev=overlay ino=3826 31.79> [ 5.138254] kauditd_printk_skb: 72 callbacks suppressed 31.79> [ 5.138271] audit: type=1130 audit(6.024:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-userdbd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 31.79> [ 5.221434] audit: type=1400 audit(6.108:44): avc: denied { read } for pid=341 comm="(imesyncd)" name="timesync" dev="mmcblk0p6" ino=7953 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:ntp_drift_t:s0 tclass=dir permissive=0 31.79> [ 5.221471] audit: type=1300 audit(6.108:44): arch=c00000b7 syscall=56 success=no exit=-13 a0=ffffffffffffff9c a1=198bf600 a2=c4000 a3=0 items=0 ppid=1 pid=341 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(imesyncd)" exe="/usr/lib/systemd/systemd-executor" subj=system_u:system_r:init_t:s0 key=(null) 31.79> [ 5.221485] audit: type=1327 audit(6.108:44): proctitle="(imesyncd)" 31.79> [ 5.271674] audit: type=1334 audit(6.160:45): prog-id=9 op=UNLOAD 31.79> [ 5.275512] audit: type=1130 audit(6.164:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' 31.79> [ 5.287407] audit: type=1334 audit(6.176:47): prog-id=13 op=LOAD 31.79> [ 5.290028] virtio_rpmsg_bus virtio0: msg received with no recipient 31.79> [ 5.365471] audit: type=1400 audit(6.252:48): avc: denied { read } for pid=360 comm="(imesyncd)" name="timesync" dev="mmcblk0p6" ino=7953 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:ntp_drift_t:s0 tclass=dir permissive=0 31.79> [ 5.365502] audit: type=1300 audit(6.252:48): arch=c00000b7 syscall=56 success=no exit=-13 a0=ffffffffffffff9c a1=391f9600 a2=c4000 a3=0 items=0 ppid=1 pid=360 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(imesyncd)" exe="/usr/lib/systemd/systemd-executor" subj=system_u:system_r:init_t:s0 key=(null) 31.79> [ 5.365516] audit: type=1327 audit(6.252:48): proctitle="(imesyncd)" 31.79> [ 5.910684] overlayfs: failed to get metacopy (-13) 32.00> [ 6.894169] v4l2_get_link_freq: Link frequency estimated using pixel rate: result might be inaccurate 32.01> [ 6.894189] v4l2_get_link_freq: Consider implementing support for V4L2_CID_LINK_FREQ in the transmitter driver 32.01> [ 6.894658] === ox02c10_set_stream 32.01> [ 6.894667] === ox02c10_power_on 32.01> [ 6.898774] SELinux: inode_doinit_use_xattr: getxattr returned 13 for dev=overlay ino=3826 32.01> [ 6.940392] overlayfs: failed to get metacopy (-13) 32.01> [ 6.964728] === ox02c10_power_on max96714 is locked, loops:0 32.01> [ 6.964761] === ox02c10_start_streaming 32.01> [ 7.250036] ====== ox02c10_set_ctrl V4L2_CID_EXPOSURE 32.03> [ 7.250060] ====== ox02c10_set_ctrl V4L2_CID_ANALOGUE_GAIN 32.03> [ 7.250064] ====== ox02c10_set_ctrl V4L2_CID_DIGITAL_GAIN 32.03> [ 7.250067] ====== ox02c10_set_ctrl V4L2_CID_VFLIP 32.03> [ 7.250071] ====== ox02c10_set_ctrl V4L2_CID_VFLIP 32.03> [ 7.250075] ====== ox02c10_set_ctrl V4L2_CID_TEST_PATTERN 32.03> [ 7.267979] = ti_csi2rx_dma_callback, cnt = 0 32.03> [ 7.300503] = ti_csi2rx_dma_callback, cnt = 1 32.03> [ 7.333020] = ti_csi2rx_dma_callback, cnt = 2 32.03> [ 7.355353] === ox02c10_start_streaming max96714 0x11A = 0x62 32.03> [ 7.355575] === ox02c10_start_streaming max96717 0x112 = 0x8a 32.03> [ 7.355779] === ox02c10_start_streaming OX02C10 0x4613 = 0x4 32.03> [ 7.355981] === ox02c10_start_streaming OX02C10 0x3508 = 0x3 32.03> [ 7.356183] === ox02c10_start_streaming OX02C10 0x3509 = 0x0 32.03> [ 7.356384] === ox02c10_start_streaming OX02C10 0x4613 = 0x4 32.03> [ 7.365543] = ti_csi2rx_dma_callback, cnt = 3 32.03> [ 10.363093] sched: RT throttling activated 32.03> [ 11.089949] cmaExpTime_store: buf=0043 32.03> [ 11.108957] kauditd_printk_skb: 60 callbacks suppressed 32.03> [ 11.108970] audit: type=1131 audit(1732969504.168:92): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=WDG comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 32.03> [ 12.807164] cmaExpTime_store: buf=003d 32.03> [ 12.814989] cmaExpTime_store: buf=0038 32.03> [ 12.845876] cmaExpTime_store: buf=0032 32.03> [ 13.228909] cmaExpTime_store: buf=002d 32.03> [ 13.236833] cmaExpTime_store: buf=0027 32.03> [ 13.268582] cmaExpTime_store: buf=0022 32.03> [ 13.651594] cmaExpTime_store: buf=001c 32.03> [ 13.659549] cmaExpTime_store: buf=0016 32.03> [ 13.692622] cmaExpTime_store: buf=0010 32.03> [ 14.075906] cmaExpTime_store: buf=000b 32.04> [ 14.084189] cmaExpTime_store: buf=0009 32.04> [ 20.074714] audit: type=1112 audit(1732969513.132:93): pid=412 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:local_login_t:s0 msg='op=login acct="root" exe="/usr/bin/login.shadow" hostname=am62axx-evm addr=? terminal=/dev/ttyS2 res=success' 32.04> root@am62axx-evm:~# 33.96< 34.00> root@am62axx-evm:~# 34.01> root@am62axx-evm:~# 107.14> root@am62axx-evm:~# save_to_file_ex size_left:4096 107.14> save_to_file_ex 1111111 107.14> save_to_file_ex 222222 309.71> [SVP] Drop caches. 609.85> [SVP] Drop caches. 910.00> [SVP] Drop caches.