Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.43-svn9707 (root@virtual-machine) (gcc version 5.2.0 (Buildroot 2015.11.1) ) #2 Mon Dec 11 00:39:51 IST 2023 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: TI AM335x BeagleBone [ 0.000000] cma: CMA: reserved 24 MiB at 9e000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.1 (neon ) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 rootwait=1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 450288K/523264K available (6243K kernel code, 312K rwdata, 2192K rodata, 34691K init, 238K bss, 72976K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08450e4 (8437 kB) [ 0.000000] .init : 0xc0846000 - 0xc2a26c2c (34692 kB) [ 0.000000] .data : 0xc2a28000 - 0xc2a760e8 ( 313 kB) [ 0.000000] .bss : 0xc2a760e8 - 0xc2ab1a3c ( 239 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: timer2 at 25000000 Hz [ 0.000012] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798691800ns [ 0.000027] OMAP clocksource: timer1 at 25000000 Hz [ 0.000237] Console: colour dummy device 80x30 [ 0.000256] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' [ 0.000262] This ensures that you still see kernel messages. Please [ 0.000266] update your kernel commandline. [ 0.000284] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736) [ 0.089548] pid_max: default: 32768 minimum: 301 [ 0.089630] Security Framework initialized [ 0.089679] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.089688] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.095424] CPU: Testing write buffer coherency: ok [ 0.095754] Setting up static identity map for 0x8061f2a8 - 0x8061f300 [ 0.096480] devtmpfs: initialized [ 0.097889] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 0.103601] omap_hwmod: tptc0 using broken dt data from edma [ 0.103669] omap_hwmod: tptc1 using broken dt data from edma [ 0.103726] omap_hwmod: tptc2 using broken dt data from edma [ 0.107608] omap_hwmod: debugss: _wait_target_disable failed [ 0.162170] pinctrl core: initialized pinctrl subsystem [ 0.163015] regulator-dummy: no parameters [ 0.164992] NET: Registered protocol family 16 [ 0.166618] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.168668] cpuidle: using governor ladder [ 0.168682] cpuidle: using governor menu [ 0.173749] syscon 44e10000.control_module: regmap [mem 0x44e10000-0x44e107fb] registered [ 0.174933] platform 49000000.edma: alias fck already exists [ 0.174954] platform 49000000.edma: alias fck already exists [ 0.174966] platform 49000000.edma: alias fck already exists [ 0.175875] OMAP GPIO hardware version 0.1 [ 0.185409] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nand_pins_default, deferring probe [ 0.185439] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral [ 0.187283] No ATAGs? [ 0.187298] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.208422] bio: create slab at 0 [ 0.221126] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.221955] vmmcsd_fixed: 3300 mV [ 0.224364] vgaarb: loaded [ 0.224789] i2c-core: driver [palmas] using legacy suspend method [ 0.224797] i2c-core: driver [palmas] using legacy resume method [ 0.225380] SCSI subsystem initialized [ 0.226563] usbcore: registered new interface driver usbfs [ 0.226708] usbcore: registered new interface driver hub [ 0.226865] usbcore: registered new device driver usb [ 0.227645] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe [ 0.227668] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral [ 0.227690] omap_i2c 4819c000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c2_pins, deferring probe [ 0.227701] platform 4819c000.i2c: Driver omap_i2c requests probe deferral [ 0.227998] pps_core: LinuxPPS API ver. 1 registered [ 0.228006] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.228106] PTP clock support registered [ 0.229718] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 [ 0.230444] Advanced Linux Sound Architecture Driver Initialized. [ 0.231734] Switched to clocksource timer1 [ 0.247095] NET: Registered protocol family 2 [ 0.247794] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.247838] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.247876] TCP: Hash tables configured (established 4096 bind 4096) [ 0.247934] TCP: reno registered [ 0.247944] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.247968] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.248100] NET: Registered protocol family 1 [ 0.248435] RPC: Registered named UNIX socket transport module. [ 0.248444] RPC: Registered udp transport module. [ 0.248449] RPC: Registered tcp transport module. [ 0.248454] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.458836] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.461450] futex hash table entries: 256 (order: -1, 3072 bytes) [ 2.596384] VFS: Disk quotas dquot_6.5.2 [ 2.596446] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.596891] NFS: Registering the id_resolver key type [ 2.596978] Key type id_resolver registered [ 2.596985] Key type id_legacy registered [ 2.597018] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.597160] msgmni has been set to 927 [ 2.598316] NET: Registered protocol family 38 [ 2.598348] io scheduler noop registered [ 2.598354] io scheduler deadline registered [ 2.598379] io scheduler cfq registered (default) [ 2.599858] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 2.607921] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 2.612361] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a 8250 [ 3.262669] console [ttyS0] enabled [ 3.267098] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 90, base_baud = 3000000) is a 8250 [ 3.276725] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 61, base_baud = 3000000) is a 8250 [ 3.286309] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 62, base_baud = 3000000) is a 8250 [ 3.296591] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 3.303601] [drm] Initialized drm 1.1.0 20060810 [ 3.316947] brd: module loaded [ 3.324613] loop: module loaded [ 3.328244] (hci_tty): inside hci_tty_init [ 3.332786] (hci_tty): allocated 250, 0 [ 3.339132] mtdoops: mtd device (mtddev=name/number) must be supplied [ 3.349000] usbcore: registered new interface driver asix [ 3.354653] usbcore: registered new interface driver ax88179_178a [ 3.360929] usbcore: registered new interface driver cdc_ether [ 3.366932] usbcore: registered new interface driver smsc95xx [ 3.372852] usbcore: registered new interface driver net1080 [ 3.378674] usbcore: registered new interface driver cdc_subset [ 3.384739] usbcore: registered new interface driver zaurus [ 3.390539] usbcore: registered new interface driver cdc_ncm [ 3.396658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.403240] ehci-pci: EHCI PCI platform driver [ 3.407870] ehci-omap: OMAP-EHCI Host Controller driver [ 3.413552] usbcore: registered new interface driver cdc_wdm [ 3.419407] usbcore: registered new interface driver usb-storage [ 3.427446] 47401300.usb-phy supply vcc not found, using dummy regulator [ 3.436680] musb-hdrc musb-hdrc.0.auto: Failed to request rx1. [ 3.442707] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 [ 3.450521] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral [ 3.458556] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 3.467657] musb-hdrc musb-hdrc.1.auto: Failed to request rx1. [ 3.473654] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 [ 3.481460] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral [ 3.500656] mousedev: PS/2 mouse device common for all mice [ 3.508188] i2c-core: driver [rtc-ds1307] using legacy suspend method [ 3.514703] i2c-core: driver [rtc-ds1307] using legacy resume method [ 3.521832] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 3.528948] 44e3e000.rtc: already running [ 3.533869] i2c /dev entries driver [ 3.537503] Driver for 1-wire Dallas network protocol. [ 3.545001] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 3.596122] ledtrig-cpu: registered to indicate activity on CPUs [ 3.602524] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 3.609679] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 3.619882] usbcore: registered new interface driver usbhid [ 3.625516] usbhid: USB HID core driver [ 3.629608] platform 44d00000.wkup_m3: Driver wkup_m3 requests probe deferral [ 3.639643] oprofile: using arm/armv7 [ 3.643646] TCP: cubic registered [ 3.646974] Initializing XFRM netlink socket [ 3.651312] NET: Registered protocol family 10 [ 3.656628] sit: IPv6 over IPv4 tunneling driver [ 3.662369] NET: Registered protocol family 17 [ 3.666865] NET: Registered protocol family 15 [ 3.671406] Key type dns_resolver registered [ 3.676467] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517 [ 3.685246] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.690817] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral [ 3.698935] PM: bootloader does not support rtc-only! [ 3.704128] ThumbEE CPU extension supported. [ 3.708478] Registering SWP/SWPB emulation handler [ 3.714693] regulator-dummy: disabling [ 3.718558] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.727389] Error: Driver 'tfp410' is already registered, aborting... [ 3.735465] tilcdc 4830e000.lcdc: no encoders/connectors found [ 3.741455] mmc0: new high speed SDHC card at address 1234 [ 3.747260] tilcdc 4830e000.lcdc: failed to initialize mode setting [ 3.753917] mmcblk0: mmc0:1234 SA08G 7.21 GiB [ 3.760393] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 3.765612] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000 [ 3.771836] mmcblk0: p1 [ 3.776187] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xba [ 3.782628] nand: Micron NAND 256MiB 1,8V 16-bit [ 3.787264] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 3.792956] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 3.798452] 12 ofpart partitions found on MTD device omap2-nand.0 [ 3.804591] Creating 12 MTD partitions on "omap2-nand.0": [ 3.810017] 0x000000000000-0x000000020000 : "NAND.SPL" [ 3.816664] 0x000000020000-0x000000040000 : "NAND.SPL.backup1" [ 3.823869] 0x000000040000-0x000000060000 : "NAND.SPL.backup2" [ 3.830965] 0x000000060000-0x000000080000 : "NAND.SPL.backup3" [ 3.838103] 0x000000080000-0x0000000c0000 : "NAND.u-boot-spl-os" [ 3.845500] 0x0000000c0000-0x0000001c0000 : "NAND.u-boot" [ 3.852873] 0x0000001c0000-0x0000001e0000 : "NAND.u-boot-env" [ 3.859844] 0x0000001e0000-0x000000200000 : "NAND.u-boot-env.backup1" [ 3.867590] 0x000000200000-0x000005200000 : "NAND.kernel" [ 3.939459] 0x000005200000-0x00000a200000 : "NAND.kernel.bkup" [ 4.011696] 0x00000a200000-0x00000a220000 : "NAND.recovery.metadata" [ 4.019418] 0x00000a220000-0x00000ff20000 : "NAND.userdata" [ 4.109223] DCDC1: at 1350 mV [ 4.113349] vdd_mpu: 925 <--> 1375 mV at 1325 mV [ 4.119040] vdd_core: 925 <--> 1150 mV at 1125 mV [ 4.124824] LDO1: at 1800 mV [ 4.128739] LDO2: at 3300 mV [ 4.132663] LDO3: 1800 mV [ 4.136318] LDO4: at 3300 mV [ 4.140283] tps65217 0-0024: TPS65217 ID 0x6 version 1.2 [ 4.150005] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 4.161135] rtc-pcf85063 0-0051: chip found, driver version 0.0.2 [ 4.168226] rtc-pcf85063 0-0051: rtc core: registered rtc-pcf85063 as rtc1 [ 4.175798] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 4.186917] lm75: probe of 2-0048 failed with error -121 [ 4.196586] at24 2-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write [ 4.203870] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz [ 4.216179] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 4.222568] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 4.230616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.237465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.244727] usb usb1: Product: MUSB HDRC host driver [ 4.249711] usb usb1: Manufacturer: Linux 3.14.43-svn9707 musb-hcd [ 4.255923] usb usb1: SerialNumber: musb-hdrc.1.auto [ 4.261702] hub 1-0:1.0: USB hub found [ 4.265556] hub 1-0:1.0: 1 port detected [ 4.270348] remoteproc0: wkup_m3 is available [ 4.274858] remoteproc0: Note: remoteproc is still under development and considered experimental. [ 4.283862] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 4.294407] remoteproc0: Direct firmware load failed with error -2 [ 4.300701] remoteproc0: Falling back to user helper [ 4.306264] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1100000]:-22 [ 4.381834] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 4.388000] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 4.404744] libphy: 4a101000.mdio: probed [ 4.408840] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver Broadcom BCM50610 [ 4.418876] cpsw 4a100000.ethernet: Random MACID = 1a:89:ed:8c:ac:c4 [ 4.430295] rtc-pcf85063 0-0051: setting system clock to 2017-05-26 17:50:25 UTC (1495821025) [ 4.445324] ALSA device list: [ 4.448342] No soundcards found. [ 4.560655] Freeing unused kernel memory: 34688K (c0846000 - c2a26000) Failed to insert module 'autofs4': Function not implemented [ 4.600263] random: systemd urandom read with 13 bits of entropy available [ 4.611687] systemd[1]: systemd 227 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 4.632348] systemd[1]: Detected architecture arm. Welcome to Buildroot 2015.11.1! [ 4.646182] systemd[1]: Initializing machine ID from random generator. Ignoring "noauto" for root device [ 16.809677] net eth0: initializing cpsw version 1.12 (0) [ 16.962359] net eth0: phy found : id is : 0x143bd63 [ 16.967380] libphy: PHY 4a101000.mdio:01 not found [ 16.972243] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 17.106535] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.982176] libphy: 4a101000.mdio:00 - Link is Up - 10/Full [ 20.081802] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready # ifconfig eth0 Link encap:Ethernet HWaddr 1A:89:ED:8C:AC:C4 inet6 addr: 3ffe:501:ffff:100:c246:b739:b808:5450/64 Scope:Global inet6 addr: 3ffe:501:ffff:100:1889:edff:fe8c:acc4/64 Scope:Global inet6 addr: fe80::1889:edff:fe8c:acc4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1190 (1.1 KiB) TX bytes:4295 (4.1 KiB) Interrupt:56 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:356 errors:0 dropped:0 overruns:0 frame:0 TX packets:356 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:26436 (25.8 KiB) TX bytes:26436 (25.8 KiB) sit0 Link encap:IPv6-in-IPv4 UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)