============Kernel log _uart4======================== root@am62xx-evm:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.33-g40c32565ca (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Jul 6 14:17:24 UTC 2023 [ 0.000000] Machine model: Texas Instruments AM625 SK [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824 [ 0.000000] pcpu-alloc: s38376 r8192 d31256 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=b24cef33-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1838288K/2097152K available (12352K kernel code, 1276K rwdata, 4016K rodata, 2176K init, 493K bss, 127792K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008580] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.019274] pid_max: default: 32768 minimum: 301 [ 0.024060] LSM: Security Framework initializing [ 0.028940] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.036529] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.046706] cblist_init_generic: Setting adjustable number of callback queues. [ 0.054184] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.060501] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.066918] rcu: Hierarchical SRCU implementation. [ 0.071832] rcu: Max phase no-delay instances is 1000. [ 0.077481] Platform MSI: msi-controller@1820000 domain created [ 0.083847] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.093722] EFI services will not be available. [ 0.098699] smp: Bringing up secondary CPUs ... [ 0.104081] Detected VIPT I-cache on CPU1 [ 0.104217] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.104243] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000 [ 0.104307] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.105147] Detected VIPT I-cache on CPU2 [ 0.105236] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.105258] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000 [ 0.105297] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.106029] Detected VIPT I-cache on CPU3 [ 0.106129] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.106150] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000 [ 0.106180] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.106275] smp: Brought up 1 node, 4 CPUs [ 0.186016] SMP: Total of 4 processors activated. [ 0.190829] CPU features: detected: 32-bit EL0 Support [ 0.196106] CPU features: detected: CRC32 instructions [ 0.201441] CPU: All CPU(s) started at EL2 [ 0.205644] alternatives: applying system-wide alternatives [ 0.213620] devtmpfs: initialized [ 0.226529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.236566] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.249153] pinctrl core: initialized pinctrl subsystem [ 0.255301] DMI not present or invalid. [ 0.259995] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.267467] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.275088] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.283224] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291427] audit: initializing netlink subsys (disabled) [ 0.297165] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1 [ 0.297671] thermal_sys: Registered thermal governor 'step_wise' [ 0.305100] thermal_sys: Registered thermal governor 'power_allocator' [ 0.311300] cpuidle: using governor menu [ 0.322201] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.329244] ASID allocator initialised with 65536 entries [ 0.346825] platform 30200000.dss: Fixed dependency cycle(s) with /bus@f0000/i2c@20010000/sii9022@3b [ 0.358232] platform connector: Fixed dependency cycle(s) with /bus@f0000/i2c@20010000/sii9022@3b [ 0.369682] KASLR disabled due to lack of seed [ 0.381729] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388713] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.395123] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402062] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.408470] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.415408] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.421817] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.428756] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.437179] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.446162] reg-fixed-voltage regulator-0: GPIO lookup for consumer (null) [ 0.446177] reg-fixed-voltage regulator-0: using device tree for GPIO lookup [ 0.446190] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-0[0]' [ 0.446206] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-0[0]' [ 0.446224] reg-fixed-voltage regulator-0: using lookup tables for GPIO lookup [ 0.446230] reg-fixed-voltage regulator-0: No GPIO consumer (null) found [ 0.446502] reg-fixed-voltage regulator-1: GPIO lookup for consumer (null) [ 0.446509] reg-fixed-voltage regulator-1: using device tree for GPIO lookup [ 0.446519] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-1[0]' [ 0.446532] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-1[0]' [ 0.446546] reg-fixed-voltage regulator-1: using lookup tables for GPIO lookup [ 0.446552] reg-fixed-voltage regulator-1: No GPIO consumer (null) found [ 0.446787] reg-fixed-voltage regulator-2: GPIO lookup for consumer (null) [ 0.446794] reg-fixed-voltage regulator-2: using device tree for GPIO lookup [ 0.446803] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-2[0]' [ 0.446816] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-2[0]' [ 0.446828] reg-fixed-voltage regulator-2: using lookup tables for GPIO lookup [ 0.446834] reg-fixed-voltage regulator-2: No GPIO consumer (null) found [ 0.447075] reg-fixed-voltage regulator-3: GPIO lookup for consumer (null) [ 0.447083] reg-fixed-voltage regulator-3: using device tree for GPIO lookup [ 0.447093] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-3[0]' [ 0.447105] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3[0]' [ 0.447116] reg-fixed-voltage regulator-3: using lookup tables for GPIO lookup [ 0.447121] reg-fixed-voltage regulator-3: No GPIO consumer (null) found [ 0.447323] reg-fixed-voltage regulator-5: GPIO lookup for consumer (null) [ 0.447329] reg-fixed-voltage regulator-5: using device tree for GPIO lookup [ 0.447338] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/regulator-5[0]' [ 0.447353] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-5[0]' [ 0.447363] reg-fixed-voltage regulator-5: using lookup tables for GPIO lookup [ 0.447368] reg-fixed-voltage regulator-5: No GPIO consumer (null) found [ 0.448098] iommu: Default domain type: Translated [ 0.453116] iommu: DMA domain TLB invalidation policy: strict mode [ 0.459883] SCSI subsystem initialized [ 0.463908] libata version 3.00 loaded. [ 0.464203] usbcore: registered new interface driver usbfs [ 0.469860] usbcore: registered new interface driver hub [ 0.475330] usbcore: registered new device driver usb [ 0.481161] pps_core: LinuxPPS API ver. 1 registered [ 0.486241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.495594] PTP clock support registered [ 0.499738] EDAC MC: Ver: 3.0.0 [ 0.503996] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100 [ 0.511205] FPGA manager framework [ 0.514803] Advanced Linux Sound Architecture Driver Initialized. [ 0.522171] clocksource: Switched to clocksource arch_sys_counter [ 0.528714] VFS: Disk quotas dquot_6.6.0 [ 0.532778] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.541104] NET: Registered PF_INET protocol family [ 0.546425] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.555786] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.564623] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.572561] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.580781] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.588887] TCP: Hash tables configured (established 16384 bind 16384) [ 0.595867] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.602819] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.610427] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.616800] RPC: Registered named UNIX socket transport module. [ 0.622891] RPC: Registered udp transport module. [ 0.627702] RPC: Registered tcp transport module. [ 0.632511] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.639103] NET: Registered PF_XDP protocol family [ 0.644017] PCI: CLS 0 bytes, default 64 [ 0.648954] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.659328] Initialise system trusted keyrings [ 0.664233] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.677425] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.684259] NFS: Registering the id_resolver key type [ 0.689507] Key type id_resolver registered [ 0.693785] Key type id_legacy registered [ 0.697962] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.704822] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.712624] 9p: Installing v9fs 9p2000 file system support [ 0.753086] Key type asymmetric registered [ 0.757281] Asymmetric key parser 'x509' registered [ 0.762344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.770104] io scheduler mq-deadline registered [ 0.774744] io scheduler kyber registered [ 0.782655] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.789282] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.796234] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.810685] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.828239] loop: module loaded [ 0.832989] megasas: 07.719.03.00-rc1 [ 0.839876] mdio_bus fixed-0: GPIO lookup for consumer reset [ 0.839900] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 0.839907] mdio_bus fixed-0: No GPIO consumer reset found [ 0.841401] tun: Universal TUN/TAP device driver, 1.6 [ 0.847437] thunder_xcv, ver 1.0 [ 0.850802] thunder_bgx, ver 1.0 [ 0.854125] nicpf, ver 1.0 [ 0.857328] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.864717] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.870227] hclge is initializing [ 0.873631] e1000: Intel(R) PRO/1000 Network Driver [ 0.878617] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.884535] e1000e: Intel(R) PRO/1000 Network Driver [ 0.889609] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.895693] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.901219] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.906943] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.913350] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.919556] sky2: driver version 1.30 [ 0.924095] VFIO - User Level meta-driver version: 0.3 [ 0.930333] usbcore: registered new interface driver usb-storage [ 0.937182] i2c_dev: i2c /dev entries driver [ 0.944077] sdhci: Secure Digital Host Controller Interface driver [ 0.950467] sdhci: Copyright(c) Pierre Ossman [ 0.955441] Synopsys Designware Multimedia Card Interface Driver [ 0.962096] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.969064] ledtrig-cpu: registered to indicate activity on CPUs [ 0.975473] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.982482] usbcore: registered new interface driver usbhid [ 0.988185] usbhid: USB HID core driver [ 0.993567] optee: probing for conduit method. [ 0.998189] optee: revision 3.20 (8e74d476) [ 0.998585] optee: dynamic shared memory is enabled [ 1.008174] optee: initialized driver [ 1.014105] Initializing XFRM netlink socket [ 1.018559] NET: Registered PF_PACKET protocol family [ 1.024035] 9pnet: Installing 9P2000 support [ 1.028501] Key type dns_resolver registered [ 1.033431] registered taskstats version 1 [ 1.037678] Loading compiled-in X.509 certificates [ 1.052472] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)') [ 1.121938] i2c i2c-0: GPIO lookup for consumer scl [ 1.121962] i2c i2c-0: using device tree for GPIO lookup [ 1.121978] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@f0000/i2c@20000000[0]' [ 1.121997] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@f0000/i2c@20000000[0]' [ 1.122012] i2c i2c-0: using lookup tables for GPIO lookup [ 1.122019] i2c i2c-0: No GPIO consumer scl found [ 1.122038] i2c i2c-0: GPIO lookup for consumer sda [ 1.122045] i2c i2c-0: using device tree for GPIO lookup [ 1.122053] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@f0000/i2c@20000000[0]' [ 1.122067] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@f0000/i2c@20000000[0]' [ 1.122079] i2c i2c-0: using lookup tables for GPIO lookup [ 1.122085] i2c i2c-0: No GPIO consumer sda found [ 1.122399] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz [ 1.129113] i2c i2c-1: GPIO lookup for consumer scl [ 1.129127] i2c i2c-1: using device tree for GPIO lookup [ 1.129149] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@f0000/i2c@20010000[0]' [ 1.129164] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@f0000/i2c@20010000[0]' [ 1.129183] i2c i2c-1: using lookup tables for GPIO lookup [ 1.129189] i2c i2c-1: No GPIO consumer scl found [ 1.129206] i2c i2c-1: GPIO lookup for consumer sda [ 1.129211] i2c i2c-1: using device tree for GPIO lookup [ 1.129223] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@f0000/i2c@20010000[0]' [ 1.129237] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@f0000/i2c@20010000[0]' [ 1.129248] i2c i2c-1: using lookup tables for GPIO lookup [ 1.129253] i2c i2c-1: No GPIO consumer sda found [ 1.130301] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz [ 1.137483] i2c i2c-2: GPIO lookup for consumer scl [ 1.137509] i2c i2c-2: using device tree for GPIO lookup [ 1.137524] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/bus@f0000/i2c@20020000[0]' [ 1.137544] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/bus@f0000/i2c@20020000[0]' [ 1.137558] i2c i2c-2: using lookup tables for GPIO lookup [ 1.137565] i2c i2c-2: No GPIO consumer scl found [ 1.137588] i2c i2c-2: GPIO lookup for consumer sda [ 1.137592] i2c i2c-2: using device tree for GPIO lookup [ 1.137602] of_get_named_gpiod_flags: can't parse 'sda-gpios' property of node '/bus@f0000/i2c@20020000[0]' [ 1.137618] of_get_named_gpiod_flags: can't parse 'sda-gpio' property of node '/bus@f0000/i2c@20020000[0]' [ 1.137629] i2c i2c-2: using lookup tables for GPIO lookup [ 1.137634] i2c i2c-2: No GPIO consumer sda found [ 1.137670] omap_i2c 20020000.i2c: bus 2 rev0.12 at 400 kHz [ 1.143700] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 1.152074] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 1.161349] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.171575] ti-udma 485c0100.dma-controller: Number of rings: 82 [ 1.180084] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18) [ 1.191595] ti-udma 485c0000.dma-controller: Number of rings: 150 [ 1.202068] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) [ 1.212764] printk: console [ttyS2] disabled [ 1.217190] omap8250 2800000.serial: GPIO lookup for consumer rs485-term [ 1.217198] omap8250 2800000.serial: using device tree for GPIO lookup [ 1.217217] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/bus@f0000/serial@2800000[0]' [ 1.217234] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/bus@f0000/serial@2800000[0]' [ 1.217254] omap8250 2800000.serial: using lookup tables for GPIO lookup [ 1.217260] omap8250 2800000.serial: No GPIO consumer rs485-term found [ 1.217301] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 239, base_baud = 3000000) is a 8250 [ 1.226231] printk: console [ttyS2] enabled [ 1.234692] printk: bootconsole [ns16550a0] disabled [ 1.245455] pinctrl-single f4000.pinctrl: pin PIN44 already requested by 20020000.i2c; cannot claim for 2840000.serial [ 1.256161] pinctrl-single f4000.pinctrl: pin-44 (2840000.serial) status -22 [ 1.263206] pinctrl-single f4000.pinctrl: could not request pin 44 (PIN44) from group main-uart4-default-pins on device pinctrl-single [ 1.275362] omap8250 2840000.serial: Error applying setting, reverse things back [ 1.285637] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 1.290766] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 [ 1.297724] Creating 7 MTD partitions on "fc40000.spi.0": [ 1.303131] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.310109] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.316801] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.323422] 0x000000680000-0x0000006c0000 : "ospi.env" [ 1.329806] 0x0000006c0000-0x000000700000 : "ospi.env.backup" [ 1.336810] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 1.343540] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 1.352379] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.359317] mdio_bus 8000f00.mdio: GPIO lookup for consumer reset [ 1.359333] mdio_bus 8000f00.mdio: using device tree for GPIO lookup [ 1.359347] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [ 1.359367] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00[0]' [ 1.359383] mdio_bus 8000f00.mdio: using lookup tables for GPIO lookup [ 1.359390] mdio_bus 8000f00.mdio: No GPIO consumer reset found [ 1.398196] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.406791] mdio_bus 8000f00.mdio:00: GPIO lookup for consumer reset [ 1.406804] mdio_bus 8000f00.mdio:00: using device tree for GPIO lookup [ 1.406817] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@0[0]' [ 1.406848] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/ethernet@8000000/mdio@f00/ethernet-phy@0[0]' [ 1.406870] mdio_bus 8000f00.mdio:00: using lookup tables for GPIO lookup [ 1.406876] mdio_bus 8000f00.mdio:00: No GPIO consumer reset found [ 1.407611] mdio_bus 8000f00.mdio: MDIO device at address 1 is missing. [ 1.414232] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 1.422351] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.435354] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.441627] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.448753] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.455356] pps pps0: new PPS source ptp0 [ 1.459683] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1 [ 1.470445] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.482514] sdhci-am654 fa10000.mmc: GPIO lookup for consumer cd [ 1.482550] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [ 1.482564] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.482600] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.482622] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [ 1.482629] sdhci-am654 fa10000.mmc: No GPIO consumer cd found [ 1.482637] sdhci-am654 fa10000.mmc: GPIO lookup for consumer wp [ 1.482641] sdhci-am654 fa10000.mmc: using device tree for GPIO lookup [ 1.482650] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.482666] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa10000[0]' [ 1.482677] sdhci-am654 fa10000.mmc: using lookup tables for GPIO lookup [ 1.482682] sdhci-am654 fa10000.mmc: No GPIO consumer wp found [ 1.482890] gpiochip_find_base: found new base at 488 [ 1.483026] mmc0: CQHCI version 5.10 [ 1.483196] gpio gpiochip0: (4201000.gpio): added GPIO chardev (254:0) [ 1.486684] gpio gpiochip0: registered GPIOs 488 to 511 on 4201000.gpio [ 1.488470] gpiochip_find_base: found new base at 396 [ 1.488688] gpio gpiochip1: (600000.gpio): added GPIO chardev (254:1) [ 1.488751] gpio gpiochip1: registered GPIOs 396 to 487 on 600000.gpio [ 1.491473] gpiochip_find_base: found new base at 344 [ 1.491702] gpio gpiochip2: (601000.gpio): added GPIO chardev (254:2) [ 1.491759] gpio gpiochip2: registered GPIOs 344 to 395 on 601000.gpio [ 1.493282] gpio-regulator regulator-4: GPIO lookup for consumer (null) [ 1.493293] gpio-regulator regulator-4: using device tree for GPIO lookup [ 1.493321] of_get_named_gpiod_flags: parsed 'gpios' property of node '/regulator-4[0]' - status (0) [ 1.493340] gpio gpiochip1: Persistence not supported for GPIO 31 [ 1.493361] gpio-regulator regulator-4: GPIO lookup for consumer enable [ 1.493366] gpio-regulator regulator-4: using device tree for GPIO lookup [ 1.493376] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/regulator-4[0]' [ 1.493387] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/regulator-4[0]' [ 1.493401] gpio-regulator regulator-4: using lookup tables for GPIO lookup [ 1.493407] gpio-regulator regulator-4: No GPIO consumer enable found [ 1.493873] pca953x 1-0022: GPIO lookup for consumer reset [ 1.493889] pca953x 1-0022: using device tree for GPIO lookup [ 1.493899] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/i2c@20010000/gpio@22[0]' [ 1.493914] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/bus@f0000/i2c@20010000/gpio@22[0]' [ 1.493929] pca953x 1-0022: using lookup tables for GPIO lookup [ 1.493934] pca953x 1-0022: No GPIO consumer reset found [ 1.493953] pca953x 1-0022: supply vcc not found, using dummy regulator [ 1.500724] pca953x 1-0022: using AI [ 1.526315] pca953x 1-0022: failed writing register [ 1.528013] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.531394] pca953x: probe of 1-0022 failed with error -121 [ 1.545684] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led-0[0]' - status (0) [ 1.545734] gpio gpiochip2: Persistence not supported for GPIO 49 [ 1.545740] gpio-393 (?): no flags found for gpios [ 1.546233] sdhci-am654 fa00000.mmc: GPIO lookup for consumer cd [ 1.546255] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [ 1.546268] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.546294] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.546310] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [ 1.546316] sdhci-am654 fa00000.mmc: No GPIO consumer cd found [ 1.546328] sdhci-am654 fa00000.mmc: GPIO lookup for consumer wp [ 1.546333] sdhci-am654 fa00000.mmc: using device tree for GPIO lookup [ 1.546341] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.546355] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/mmc@fa00000[0]' [ 1.546368] sdhci-am654 fa00000.mmc: using lookup tables for GPIO lookup [ 1.546373] sdhci-am654 fa00000.mmc: No GPIO consumer wp found [ 1.547021] mmc1: CQHCI version 5.10 [ 1.547265] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.571636] ALSA device list: [ 1.574661] No soundcards found. [ 1.589975] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.598107] Waiting for root device PARTUUID=b24cef33-02... [ 1.625622] mmc0: Command Queue Engine enabled [ 1.631166] mmc0: new HS200 MMC card at address 0001 [ 1.649846] mmcblk0: mmc0:0001 0IM20E 29.6 GiB [ 1.657792] mmc1: new high speed SDHC card at address aaaa [ 1.660194] mmcblk0: p1 [ 1.664246] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 1.666549] mmcblk0boot0: mmc0:0001 0IM20E 31.5 MiB [ 1.676666] mmcblk0boot1: mmc0:0001 0IM20E 31.5 MiB [ 1.677051] mmcblk1: p1 p2 [ 1.682803] mmcblk0rpmb: mmc0:0001 0IM20E 4.00 MiB, chardev (240:0) [ 1.750729] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.759386] VFS: Mounted root (ext4 filesystem) on device 179:34. [ 1.769702] devtmpfs: mounted [ 1.774312] Freeing unused kernel memory: 2176K [ 1.778966] Run /sbin/init as init process [ 1.783062] with arguments: [ 1.783065] /sbin/init [ 1.783069] with environment: [ 1.783071] HOME=/ [ 1.783074] TERM=linux [ 3.213960] systemd[1]: System time before build time, advancing clock. [ 3.482811] NET: Registered PF_INET6 protocol family [ 3.490123] Segment Routing with IPv6 [ 3.493943] In-situ OAM (IOAM) with IPv6 [ 3.648351] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 3.681534] systemd[1]: Detected architecture arm64. [ 3.811997] systemd[1]: Hostname set to . [ 3.860908] systemd[1]: Initializing machine ID from random generator. [ 4.213507] systemd-sysv-generator[153]: SysV service '/etc/init.d/docker.init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.239236] systemd-sysv-generator[153]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.286654] systemd-sysv-generator[153]: SysV service '/etc/init.d/netperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.310660] systemd-sysv-generator[153]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.335257] systemd-sysv-generator[153]: SysV service '/etc/init.d/telnetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.359454] systemd-sysv-generator[153]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.383363] systemd-sysv-generator[153]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.408741] systemd-sysv-generator[153]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.433207] systemd-sysv-generator[153]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.458097] systemd-sysv-generator[153]: SysV service '/etc/init.d/resize_rootfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.483072] systemd-sysv-generator[153]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.506908] systemd-sysv-generator[153]: SysV service '/etc/init.d/dropbear' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.534616] systemd-sysv-generator[153]: SysV service '/etc/init.d/psplash.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.560641] systemd-sysv-generator[153]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.585385] systemd-sysv-generator[153]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.611895] systemd-sysv-generator[153]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.637927] systemd-sysv-generator[153]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 5.113386] systemd[1]: Configuration file /etc/systemd/system/ti-apps-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 5.217481] systemd[1]: /lib/systemd/system/startwlansta.service:7: Unknown key name 'After' in section 'Service', ignoring. [ 5.233713] systemd[1]: /lib/systemd/system/startwlanap.service:7: Unknown key name 'After' in section 'Service', ignoring. [ 5.301626] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 5.398997] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 5.532161] systemd[1]: Queued start job for default target Graphical Interface. [ 5.678865] systemd[1]: Created slice Slice /system/getty. [ 5.706068] systemd[1]: Created slice Slice /system/modprobe. [ 5.730122] systemd[1]: Created slice Slice /system/serial-getty. [ 5.757479] systemd[1]: Created slice User and Session Slice. [ 5.778982] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.802781] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.827141] systemd[1]: Reached target Path Units. [ 5.846511] systemd[1]: Reached target Remote File Systems. [ 5.866624] systemd[1]: Reached target Slice Units. [ 5.886610] systemd[1]: Reached target Swaps. [ 5.996124] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.019268] systemd[1]: Reached target RPC Port Mapper. [ 6.067582] systemd[1]: Listening on Process Core Dump Socket. [ 6.092290] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.118458] systemd[1]: Listening on Journal Audit Socket. [ 6.144071] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.169388] systemd[1]: Listening on Journal Socket. [ 6.194593] systemd[1]: Listening on Network Service Netlink Socket. [ 6.221936] systemd[1]: Listening on udev Control Socket. [ 6.244670] systemd[1]: Listening on udev Kernel Socket. [ 6.269080] systemd[1]: Listening on User Database Manager Socket. [ 6.339132] systemd[1]: Mounting Huge Pages File System... [ 6.367941] systemd[1]: Mounting POSIX Message Queue File System... [ 6.427199] systemd[1]: Mounting Kernel Debug File System... [ 6.451711] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.503091] systemd[1]: Mounting Temporary Directory /tmp... [ 6.542419] systemd[1]: Starting Create List of Static Device Nodes... [ 6.599430] systemd[1]: Starting Load Kernel Module configfs... [ 6.634774] systemd[1]: Starting Load Kernel Module drm... [ 6.663470] systemd[1]: Starting Load Kernel Module fuse... [ 6.850626] fuse: init (API version 7.37) [ 6.879770] systemd[1]: Starting Start psplash boot splash screen... [ 6.959666] systemd[1]: Starting RPC Bind... [ 6.975241] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 6.999634] systemd[1]: Starting Journal Service... [ 7.083610] systemd[1]: Starting Load Kernel Modules... [ 7.115427] systemd[1]: Starting Generate network units from Kernel command line... [ 7.147501] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.179102] systemd[1]: Starting Coldplug All udev Devices... [ 7.190110] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 7.190859] cryptodev: loading out-of-tree module taints kernel. [ 7.204990] cryptodev: driver 1.12 loaded. [ 7.211387] systemd[1]: Mounted Huge Pages File System. [ 7.267753] systemd[1]: Started RPC Bind. [ 7.287347] systemd[1]: Mounted POSIX Message Queue File System. [ 7.311312] systemd[1]: Mounted Kernel Debug File System. [ 7.335308] systemd[1]: Mounted Temporary Directory /tmp. [ 7.360702] systemd[1]: Finished Create List of Static Device Nodes. [ 7.383821] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 7.393052] systemd[1]: Finished Load Kernel Module configfs. [ 7.415318] systemd[1]: Started Journal Service. [ 7.740204] systemd-journald[169]: Received client request to flush runtime journal. [ 8.049826] audit: type=1334 audit(1651167749.848:2): prog-id=5 op=LOAD [ 8.056640] audit: type=1334 audit(1651167749.856:3): prog-id=6 op=LOAD [ 9.062228] random: crng init done [ 9.481159] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/bus@f0000/i2c@20010000/audio-codec@1b[0]' [ 9.481305] of_get_named_gpiod_flags: can't parse 'gpio-reset' property of node '/bus@f0000/i2c@20010000/audio-codec@1b[0]' [ 9.533295] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [ 9.542081] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [ 9.549243] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [ 9.556662] remoteproc remoteproc0: 5000000.m4fss is available [ 9.575722] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [ 9.638436] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 [ 9.643796] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:15 UTC (15) [ 9.652013] rtc-ti-k3 2b1f0000.rtc: GPIO lookup for consumer wp [ 9.652033] rtc-ti-k3 2b1f0000.rtc: using device tree for GPIO lookup [ 9.652070] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [ 9.652109] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/bus@f0000/bus@b00000/rtc@2b1f0000[0]' [ 9.652132] rtc-ti-k3 2b1f0000.rtc: using lookup tables for GPIO lookup [ 9.652140] rtc-ti-k3 2b1f0000.rtc: No GPIO consumer wp found [ 9.655208] systemd-journald[169]: Time jumped backwards, rotating. [ 9.704019] mc: Linux media interface: v0.10 [ 10.144267] remoteproc remoteproc0: powering up 5000000.m4fss [ 10.150267] remoteproc remoteproc0: Booting fw image am62-mcu-m4f0_0-fw, size 54860 [ 10.164164] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node m4f-dma-memory@9cb00000 [ 10.179894] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.180407] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [ 10.187712] rproc-virtio rproc-virtio.1.auto: registered virtio0 (type 7) [ 10.193790] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 10.200081] remoteproc remoteproc0: remote processor 5000000.m4fss is now up [ 10.214757] PVR_K: 212: Device: fd00000.gpu [ 10.216529] videodev: Linux video capture interface: v2.00 [ 10.219149] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 10.219520] PVR_K: 212: Read BVNC 33.15.11.3 from HW device registers [ 10.224670] PVR_K: 212: RGX Device registered with BVNC 33.15.11.3 [ 10.237314] platform 78000000.r5f: configured R5F for IPC-only mode [ 10.245818] [drm] Initialized pvr 23.1.6404501 20170530 for fd00000.gpu on minor 0 [ 10.249569] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [ 10.257672] display-connector connector: GPIO lookup for consumer hpd [ 10.265253] remoteproc remoteproc1: 78000000.r5f is available [ 10.271416] display-connector connector: using device tree for GPIO lookup [ 10.271462] of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/connector[0]' [ 10.277286] of_get_named_gpiod_flags: can't parse 'hpd-gpio' property of node '/connector[0]' [ 10.277333] display-connector connector: using lookup tables for GPIO lookup [ 10.277346] display-connector connector: No GPIO consumer hpd found [ 10.277358] display-connector connector: GPIO lookup for consumer ddc-en [ 10.277364] display-connector connector: using device tree for GPIO lookup [ 10.277380] of_get_named_gpiod_flags: can't parse 'ddc-en-gpios' property of node '/connector[0]' [ 10.277396] of_get_named_gpiod_flags: can't parse 'ddc-en-gpio' property of node '/connector[0]' [ 10.277406] display-connector connector: using lookup tables for GPIO lookup [ 10.277412] display-connector connector: No GPIO consumer ddc-en found [ 10.277446] remoteproc remoteproc1: attaching to 78000000.r5f [ 10.284415] platform 78000000.r5f: R5F core initialized in IPC-only mode [ 10.291346] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [ 10.304046] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.304205] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 10.309819] rproc-virtio rproc-virtio.2.auto: registered virtio1 (type 7) [ 10.321706] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 10.324234] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [ 10.588176] asoc-simple-card sound: GPIO lookup for consumer simple-audio-card,hp-det [ 10.588208] asoc-simple-card sound: using device tree for GPIO lookup [ 10.588230] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpios' property of node '/sound[0]' [ 10.588260] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 10.588275] asoc-simple-card sound: using lookup tables for GPIO lookup [ 10.588281] asoc-simple-card sound: No GPIO consumer simple-audio-card,hp-det found [ 10.588289] asoc-simple-card sound: GPIO lookup for consumer simple-audio-card,mic-det [ 10.588294] asoc-simple-card sound: using device tree for GPIO lookup [ 10.588303] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpios' property of node '/sound[0]' [ 10.588317] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 10.588326] asoc-simple-card sound: using lookup tables for GPIO lookup [ 10.588331] asoc-simple-card sound: No GPIO consumer simple-audio-card,mic-det found [ 11.365165] remoteproc remoteproc2: 30074000.pru is available [ 11.372327] remoteproc remoteproc3: 30078000.pru is available [ 11.707639] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 11.713290] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 11.721288] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports [ 11.727375] xhci-hcd xhci-hcd.3.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [ 11.736992] xhci-hcd xhci-hcd.3.auto: irq 456, io mem 0x31100000 [ 11.745091] hub 1-0:1.0: USB hub found [ 11.749062] hub 1-0:1.0: 1 port detected [ 11.957511] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 [ 14.362852] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [ 22.182089] platform fa20000.mmc: deferred probe pending [ 22.187480] platform 30200000.dss: deferred probe pending [ 22.192941] platform regulator-6: deferred probe pending [ 22.198309] platform regulator-7: deferred probe pending [ 22.204094] platform regulator-8: deferred probe pending [ 22.209594] i2c 1-003b: deferred probe pending [ 29.307055] audit: type=1334 audit(35.160:4): prog-id=7 op=LOAD [ 29.313231] audit: type=1334 audit(35.164:5): prog-id=8 op=LOAD [ 29.812273] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 29.837891] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 30.905491] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) [ 30.914926] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode [ 37.338909] audit: type=1701 audit(43.192:6): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=775 comm="kmsprint" exe="/usr/bin/kmsprint" sig=6 res=1 [ 37.568030] EXT4-fs (mmcblk1p2): resizing filesystem from 2358498 to 3856512 blocks [ 38.488358] audit: type=1334 audit(44.340:7): prog-id=9 op=LOAD [ 38.494470] audit: type=1334 audit(44.348:8): prog-id=10 op=LOAD [ 38.712353] audit: type=1325 audit(44.472:9): table=nat family=2 entries=0 op=xt_register pid=770 comm="iptables" [ 38.722739] audit: type=1300 audit(44.472:9): arch=c00000b7 syscall=209 success=yes exit=0 a0=4 a1=0 a2=40 a3=ffffd7a9b3b8 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 38.751412] audit: type=1327 audit(44.472:9): proctitle=69707461626C6573002D74006E6174002D4100504F5354524F5554494E47002D6F0065746830002D6A004D415351554552414445 [ 38.765859] audit: type=1325 audit(44.564:10): table=nat family=2 entries=5 op=xt_replace pid=770 comm="iptables" [ 38.776162] audit: type=1300 audit(44.564:10): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=11c3b210 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 38.804122] audit: type=1327 audit(44.564:10): proctitle=69707461626C6573002D74006E6174002D4100504F5354524F5554494E47002D6F0065746830002D6A004D415351554552414445 [ 42.611286] EXT4-fs (mmcblk1p2): resized filesystem to 3856512 [ 44.290446] audit: type=1334 audit(50.144:11): prog-id=10 op=UNLOAD [ 44.296902] audit: type=1334 audit(50.144:12): prog-id=9 op=UNLOAD [ 58.110599] audit: type=1334 audit(63.964:13): prog-id=11 op=LOAD [ 58.117635] audit: type=1334 audit(63.968:14): prog-id=12 op=LOAD [ 59.029896] audit: type=1006 audit(64.880:15): pid=816 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ 59.041804] audit: type=1300 audit(64.880:15): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe93b6558 a2=1 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 59.066593] audit: type=1327 audit(64.880:15): proctitle="(systemd)" [ 59.135713] audit: type=1334 audit(64.988:16): prog-id=13 op=LOAD [ 59.141905] audit: type=1300 audit(64.988:16): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff1a22620 a2=78 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null) [ 59.166775] audit: type=1327 audit(64.988:16): proctitle="(systemd)" [ 59.173277] audit: type=1334 audit(64.988:17): prog-id=13 op=UNLOAD [ 59.179625] audit: type=1334 audit(64.988:18): prog-id=14 op=LOAD [ 66.988799] kauditd_printk_skb: 3 callbacks suppressed [ 66.988820] audit: type=1701 audit(72.840:20): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=612 comm="ti-apps-launche" exe="/usr/bin/ti-apps-launcher" sig=11 res=1 [ 67.016617] audit: type=1334 audit(72.868:21): prog-id=15 op=LOAD [ 67.022801] audit: type=1334 audit(72.876:22): prog-id=16 op=LOAD [ 68.978524] audit: type=1334 audit(74.832:23): prog-id=16 op=UNLOAD [ 68.985167] audit: type=1334 audit(74.832:24): prog-id=15 op=UNLOAD root@am62xx-evm:~# dmesg | grep ttyS* [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.backup),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=b24cef33-02 rw rootfstype=ext4 rootwait [ 1.212764] printk: console [ttyS2] disabled [ 1.217301] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 239, base_baud = 3000000) is a 8250 [ 1.226231] printk: console [ttyS2] enabled [ 5.678865] systemd[1]: Created slice Slice /system/getty. [ 5.730122] systemd[1]: Created slice Slice /system/serial-getty. [ 38.722739] audit: type=1300 audit(44.472:9): arch=c00000b7 syscall=209 success=yes exit=0 a0=4 a1=0 a2=40 a3=ffffd7a9b3b8 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 38.776162] audit: type=1300 audit(44.564:10): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=11c3b210 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 59.029896] audit: type=1006 audit(64.880:15): pid=816 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ 59.041804] audit: type=1300 audit(64.880:15): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe93b6558 a2=1 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 59.141905] audit: type=1300 audit(64.988:16): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff1a22620 a2=78 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null) root@am62xx-evm:~# ls /dev/tty* /dev/tty /dev/ttyS1 /dev/ttyS11 /dev/ttyS3 /dev/ttyS5 /dev/ttyS7 /dev/ttyS9 /dev/ttyp1 /dev/ttyp3 /dev/ttyp5 /dev/ttyp7 /dev/ttyp9 /dev/ttypb /dev/ttypd /dev/ttypf /dev/ttyS0 /dev/ttyS10 /dev/ttyS2 /dev/ttyS4 /dev/ttyS6 /dev/ttyS8 /dev/ttyp0 /dev/ttyp2 /dev/ttyp4 /dev/ttyp6 /dev/ttyp8 /dev/ttypa /dev/ttypc /dev/ttype root@am62xx-evm:~# echo "hello" > /dev/ttyS4 -sh: echo: write error: Input/output error root@am62xx-evm:~# echo "hello" > /dev/ttyS3 -sh: echo: write error: Input/output error root@am62xx-evm:~# echo "hello" > /dev/ttyS2 hello root@am62xx-evm:~# echo "hello" > /dev/ttyS1 -sh: echo: write error: Input/output error root@am62xx-evm:~# echo "hello" > /dev/ttyS0 -sh: echo: write error: Input/output error root@am62xx-evm:~# echo "hello" > /dev/ttyS5 -sh: echo: write error: Input/output error root@am62xx-evm:~# echo "hello" > /dev/ttyS6 -sh: echo: write error: Input/output error root@am62xx-evm:~# =============Power On log (Console)============== U-Boot SPL 2023.04-g24098ea90d (Jul 06 2023 - 12:59:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)') SPL initial stack usage: 13376 bytes Trying to boot from MMC1 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Starting ATF on ARM64 core... NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty NOTICE: BL31: Built : 00:42:57, Jan 13 2023 U-Boot SPL 2023.04-g24098ea90d (Jul 06 2023 - 12:59:40 +0000) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)') SPL initial stack usage: 1856 bytes i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register Trying to boot from MMC1 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2023.04-g24098ea90d (Jul 06 2023 - 12:59:40 +0000) SoC: AM62X SR1.0 GP Model: Texas Instruments AM625 SK EEPROM not available at 80, trying to read at 81 Reading on-board EEPROM at 0x51 failed -1 DRAM: 2 GiB Core: 71 devices, 31 uclasses, devicetree: separate MMC: mmc@fa10000: 0, mmc@fa00000: 1 Loading Environment from nowhere... OK In: serial Out: serial Err: serial EEPROM not available at 80, trying to read at 81 Reading on-board EEPROM at 0x51 failed -1 Net: eth0: ethernet@8000000port@1 Hit any key to stop autoboot: 0 i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register switch to partitions #0, OK mmc1 is current device i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register SD/MMC found on device 1 Failed to load 'boot.scr' 574 bytes read in 16 ms (34.2 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... ## Error: "main_cpsw0_qsgmii_phyinit" not defined 20443648 bytes read in 830 ms (23.5 MiB/s) 58178 bytes read in 22 ms (2.5 MiB/s) Working FDT set to 88000000 ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 ERROR: reserving fdt memory region failed (addr=ff700000 size=8ca000 flags=4) Loading Device Tree to 000000008feee000, end 000000008fffffff ... OK Working FDT set to 8feee000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.33-g40c32565ca (oe-user@oe-host) (aarch64-oe-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Thu Ju l 6 14:17:24 UTC 2023 [ 0.000000] Machine model: Texas Instruments AM625 SK [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f7600000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009c800000, size 3 MiB [ 0.000000] OF: reserved mem: initialized node ipc-memories@9c800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cb00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node m4f-dma-memory@9cb00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009cc00000, size 14 MiB [ 0.000000] OF: reserved mem: initialized node m4f-memory@9cc00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009da00000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@9da00000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x000000009db00000, size 12 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@9db00000, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009c7fffff] [ 0.000000] node 0: [mem 0x000000009c800000-0x000000009e6fffff] [ 0.000000] node 0: [mem 0x000000009e700000-0x000000009e77ffff] [ 0.000000] node 0: [mem 0x000000009e780000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000ff6fffff] [ 0.000000] node 0: [mem 0x00000000ff700000-0x00000000fffc9fff] [ 0.000000] node 0: [mem 0x00000000fffca000-0x00000000ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=spi-nand0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-bo ot),256k(ospi.env),256k(ospi.env.backup),98048k@32m(ospi.rootfs),256k@130816k(ospi.phypattern);omap2-nand.0:2m(NAND.tiboot3),2m(NAND.tispl),2m(NAND.tiboot3.back up),4m(NAND.u-boot),256k(NAND.u-boot-env),256k(NAND.u-boot-env.backup),-(NAND.file-system) root=PARTUUID=b24cef33-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1838288K/2097152K available (12352K kernel code, 1276K rwdata, 4016K rodata, 2176K init, 493K bss, 127792K reserved, 131072K cma-reserved ) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @80800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000080040000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000080050000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008580] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.019274] pid_max: default: 32768 minimum: 301 [ 0.024060] LSM: Security Framework initializing [ 0.028940] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.036529] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.046706] cblist_init_generic: Setting adjustable number of callback queues. [ 0.054184] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.060501] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.066918] rcu: Hierarchical SRCU implementation. [ 0.071832] rcu: Max phase no-delay instances is 1000. [ 0.077481] Platform MSI: msi-controller@1820000 domain created [ 0.083847] PCI/MSI: /bus@f0000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.093722] EFI services will not be available. [ 0.098699] smp: Bringing up secondary CPUs ... [ 0.104081] Detected VIPT I-cache on CPU1 [ 0.104217] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000 [ 0.104243] GICv3: CPU1: using allocated LPI pending table @0x0000000080060000 [ 0.104307] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.105147] Detected VIPT I-cache on CPU2 [ 0.105236] GICv3: CPU2: found redistributor 2 region 0:0x00000000018c0000 [ 0.105258] GICv3: CPU2: using allocated LPI pending table @0x0000000080070000 [ 0.105297] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.106029] Detected VIPT I-cache on CPU3 [ 0.106129] GICv3: CPU3: found redistributor 3 region 0:0x00000000018e0000 [ 0.106150] GICv3: CPU3: using allocated LPI pending table @0x0000000080080000 [ 0.106180] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.106275] smp: Brought up 1 node, 4 CPUs [ 0.186016] SMP: Total of 4 processors activated. [ 0.190829] CPU features: detected: 32-bit EL0 Support [ 0.196106] CPU features: detected: CRC32 instructions [ 0.201441] CPU: All CPU(s) started at EL2 [ 0.205644] alternatives: applying system-wide alternatives [ 0.213620] devtmpfs: initialized [ 0.226529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.236566] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.249153] pinctrl core: initialized pinctrl subsystem [ 0.255301] DMI not present or invalid. [ 0.259995] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.267467] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.275088] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.283224] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291427] audit: initializing netlink subsys (disabled) [ 0.297165] audit: type=2000 audit(0.188:1): state=initialized audit_enabled=0 res=1 [ 0.297671] thermal_sys: Registered thermal governor 'step_wise' [ 0.305100] thermal_sys: Registered thermal governor 'power_allocator' [ 0.311300] cpuidle: using governor menu [ 0.322201] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.329244] ASID allocator initialised with 65536 entries [ 0.346825] platform 30200000.dss: Fixed dependency cycle(s) with /bus@f0000/i2c@20010000/sii9022@3b [ 0.358232] platform connector: Fixed dependency cycle(s) with /bus@f0000/i2c@20010000/sii9022@3b [ 0.369682] KASLR disabled due to lack of seed [ 0.381729] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388713] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.395123] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402062] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.408470] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.415408] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.421817] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.428756] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.437179] k3-chipinfo 43000014.chipid: Family:AM62X rev:SR1.0 JTAGID[0x0bb7e02f] Detected [ 0.448098] iommu: Default domain type: Translated [ 0.453116] iommu: DMA domain TLB invalidation policy: strict mode [ 0.459883] SCSI subsystem initialized [ 0.464203] usbcore: registered new interface driver usbfs [ 0.469860] usbcore: registered new interface driver hub [ 0.475330] usbcore: registered new device driver usb [ 0.481161] pps_core: LinuxPPS API ver. 1 registered [ 0.486241] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.495594] PTP clock support registered [ 0.499738] EDAC MC: Ver: 3.0.0 [ 0.503996] omap-mailbox 29000000.mailbox: omap mailbox rev 0x66fc9100 [ 0.511205] FPGA manager framework [ 0.514803] Advanced Linux Sound Architecture Driver Initialized. [ 0.522171] clocksource: Switched to clocksource arch_sys_counter [ 0.528714] VFS: Disk quotas dquot_6.6.0 [ 0.532778] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.541104] NET: Registered PF_INET protocol family [ 0.546425] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.555786] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.564623] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.572561] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.580781] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.588887] TCP: Hash tables configured (established 16384 bind 16384) [ 0.595867] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.602819] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.610427] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.616800] RPC: Registered named UNIX socket transport module. [ 0.622891] RPC: Registered udp transport module. [ 0.627702] RPC: Registered tcp transport module. [ 0.632511] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.639103] NET: Registered PF_XDP protocol family [ 0.644017] PCI: CLS 0 bytes, default 64 [ 0.648954] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.659328] Initialise system trusted keyrings [ 0.664233] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.677425] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.684259] NFS: Registering the id_resolver key type [ 0.689507] Key type id_resolver registered [ 0.693785] Key type id_legacy registered [ 0.697962] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.704822] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.712624] 9p: Installing v9fs 9p2000 file system support [ 0.753086] Key type asymmetric registered [ 0.757281] Asymmetric key parser 'x509' registered [ 0.762344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.770104] io scheduler mq-deadline registered [ 0.774744] io scheduler kyber registered [ 0.782655] pinctrl-single 4084000.pinctrl: 34 pins, size 136 [ 0.789282] pinctrl-single f4000.pinctrl: 171 pins, size 684 [ 0.796234] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.810685] Serial: 8250/16550 driver, 12 ports, IRQ sharing enabled [ 0.828239] loop: module loaded [ 0.832989] megasas: 07.719.03.00-rc1 [ 0.841401] tun: Universal TUN/TAP device driver, 1.6 [ 0.847437] thunder_xcv, ver 1.0 [ 0.850802] thunder_bgx, ver 1.0 [ 0.854125] nicpf, ver 1.0 [ 0.857328] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 0.864717] hns3: Copyright (c) 2017 Huawei Corporation. [ 0.870227] hclge is initializing [ 0.873631] e1000: Intel(R) PRO/1000 Network Driver [ 0.878617] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.884535] e1000e: Intel(R) PRO/1000 Network Driver [ 0.889609] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.895693] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.901219] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.906943] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 0.913350] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.919556] sky2: driver version 1.30 [ 0.924095] VFIO - User Level meta-driver version: 0.3 [ 0.930333] usbcore: registered new interface driver usb-storage [ 0.937182] i2c_dev: i2c /dev entries driver [ 0.944077] sdhci: Secure Digital Host Controller Interface driver [ 0.950467] sdhci: Copyright(c) Pierre Ossman [ 0.955441] Synopsys Designware Multimedia Card Interface Driver [ 0.962096] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.969064] ledtrig-cpu: registered to indicate activity on CPUs [ 0.975473] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.982482] usbcore: registered new interface driver usbhid [ 0.988185] usbhid: USB HID core driver [ 0.993567] optee: probing for conduit method. [ 0.998189] optee: revision 3.20 (8e74d476) [ 0.998585] optee: dynamic shared memory is enabled [ 1.008174] optee: initialized driver [ 1.014105] Initializing XFRM netlink socket [ 1.018559] NET: Registered PF_PACKET protocol family [ 1.024035] 9pnet: Installing 9P2000 support [ 1.028501] Key type dns_resolver registered [ 1.033431] registered taskstats version 1 [ 1.037678] Loading compiled-in X.509 certificates [ 1.052472] ti-sci 44043000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)') [ 1.122399] omap_i2c 20000000.i2c: bus 0 rev0.12 at 400 kHz [ 1.130301] omap_i2c 20010000.i2c: bus 1 rev0.12 at 100 kHz [ 1.137670] omap_i2c 20020000.i2c: bus 2 rev0.12 at 400 kHz [ 1.143700] ti-sci-intr 4210000.interrupt-controller: Interrupt Router 5 domain created [ 1.152074] ti-sci-intr bus@f0000:interrupt-controller@a00000: Interrupt Router 3 domain created [ 1.161349] ti-sci-inta 48000000.interrupt-controller: Interrupt Aggregator domain 28 created [ 1.171575] ti-udma 485c0100.dma-controller: Number of rings: 82 [ 1.180084] ti-udma 485c0100.dma-controller: Channels: 48 (bchan: 18, tchan: 12, rchan: 18) [ 1.191595] ti-udma 485c0000.dma-controller: Number of rings: 150 [ 1.202068] ti-udma 485c0000.dma-controller: Channels: 35 (tchan: 20, rchan: 15) [ 1.212764] printk: console [ttyS2] disabled [ 1.217301] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 239, base_baud = 3000000) is a 8250 [ 1.226231] printk: console [ttyS2] enabled [ 1.226231] printk: console [ttyS2] enabled [ 1.234692] printk: bootconsole [ns16550a0] disabled [ 1.234692] printk: bootconsole [ns16550a0] disabled [ 1.245455] pinctrl-single f4000.pinctrl: pin PIN44 already requested by 20020000.i2c; cannot claim for 2840000.serial [ 1.256161] pinctrl-single f4000.pinctrl: pin-44 (2840000.serial) status -22 [ 1.263206] pinctrl-single f4000.pinctrl: could not request pin 44 (PIN44) from group main-uart4-default-pins on device pinctrl-single [ 1.275362] omap8250 2840000.serial: Error applying setting, reverse things back [ 1.285637] spi-nor spi0.0: s28hs512t (65536 Kbytes) [ 1.290766] 7 fixed-partitions partitions found on MTD device fc40000.spi.0 [ 1.297724] Creating 7 MTD partitions on "fc40000.spi.0": [ 1.303131] 0x000000000000-0x000000080000 : "ospi.tiboot3" [ 1.310109] 0x000000080000-0x000000280000 : "ospi.tispl" [ 1.316801] 0x000000280000-0x000000680000 : "ospi.u-boot" [ 1.323422] 0x000000680000-0x0000006c0000 : "ospi.env" [ 1.329806] 0x0000006c0000-0x000000700000 : "ospi.env.backup" [ 1.336810] 0x000000800000-0x000003fc0000 : "ospi.rootfs" [ 1.343540] 0x000003fc0000-0x000004000000 : "ospi.phypattern" [ 1.352379] davinci_mdio 8000f00.mdio: Configuring MDIO in manual mode [ 1.398196] davinci_mdio 8000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.407611] mdio_bus 8000f00.mdio: MDIO device at address 1 is missing. [ 1.414232] davinci_mdio 8000f00.mdio: phy[0]: device 8000f00.mdio:00, driver TI DP83867 [ 1.422351] am65-cpsw-nuss 8000000.ethernet: initializing am65 cpsw nuss version 0x6BA01103, cpsw version 0x6BA81103 Ports: 3 quirks:00000006 [ 1.435354] am65-cpsw-nuss 8000000.ethernet: Use random MAC address [ 1.441627] am65-cpsw-nuss 8000000.ethernet: initialized cpsw ale version 1.5 [ 1.448753] am65-cpsw-nuss 8000000.ethernet: ALE Table size 512 [ 1.455356] pps pps0: new PPS source ptp0 [ 1.459683] am65-cpsw-nuss 8000000.ethernet: CPTS ver 0x4e8a010c, freq:500000000, add_val:1 pps:1 [ 1.470445] am65-cpsw-nuss 8000000.ethernet: set new flow-id-base 19 [ 1.483026] mmc0: CQHCI version 5.10 [ 1.493953] pca953x 1-0022: supply vcc not found, using dummy regulator [ 1.500724] pca953x 1-0022: using AI [ 1.526315] pca953x 1-0022: failed writing register [ 1.528013] mmc0: SDHCI controller on fa10000.mmc [fa10000.mmc] using ADMA 64-bit [ 1.531394] pca953x: probe of 1-0022 failed with error -121 [ 1.547021] mmc1: CQHCI version 5.10 [ 1.547265] debugfs: Directory 'pd:182' with parent 'pm_genpd' already present! [ 1.571636] ALSA device list: [ 1.574661] No soundcards found. [ 1.589975] mmc1: SDHCI controller on fa00000.mmc [fa00000.mmc] using ADMA 64-bit [ 1.598107] Waiting for root device PARTUUID=b24cef33-02... [ 1.625622] mmc0: Command Queue Engine enabled [ 1.631166] mmc0: new HS200 MMC card at address 0001 [ 1.649846] mmcblk0: mmc0:0001 0IM20E 29.6 GiB [ 1.657792] mmc1: new high speed SDHC card at address aaaa [ 1.660194] mmcblk0: p1 [ 1.664246] mmcblk1: mmc1:aaaa SC16G 14.8 GiB [ 1.666549] mmcblk0boot0: mmc0:0001 0IM20E 31.5 MiB [ 1.676666] mmcblk0boot1: mmc0:0001 0IM20E 31.5 MiB [ 1.677051] mmcblk1: p1 p2 [ 1.682803] mmcblk0rpmb: mmc0:0001 0IM20E 4.00 MiB, chardev (240:0) [ 1.750729] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 1.759386] VFS: Mounted root (ext4 filesystem) on device 179:34. [ 1.769702] devtmpfs: mounted [ 1.774312] Freeing unused kernel memory: 2176K [ 1.778966] Run /sbin/init as init process [ 3.213960] systemd[1]: System time before build time, advancing clock. [ 3.482811] NET: Registered PF_INET6 protocol family [ 3.490123] Segment Routing with IPv6 [ 3.493943] In-situ OAM (IOAM) with IPv6 [ 3.648351] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 3.681534] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.04! [ 3.811997] systemd[1]: Hostname set to . [ 3.860908] systemd[1]: Initializing machine ID from random generator. [ 4.213507] systemd-sysv-generator[153]: SysV service '/etc/init.d/docker.init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.239236] systemd-sysv-generator[153]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.286654] systemd-sysv-generator[153]: SysV service '/etc/init.d/netperf' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.310660] systemd-sysv-generator[153]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.335257] systemd-sysv-generator[153]: SysV service '/etc/init.d/telnetd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.359454] systemd-sysv-generator[153]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.383363] systemd-sysv-generator[153]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.408741] systemd-sysv-generator[153]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.433207] systemd-sysv-generator[153]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.458097] systemd-sysv-generator[153]: SysV service '/etc/init.d/resize_rootfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.483072] systemd-sysv-generator[153]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.506908] systemd-sysv-generator[153]: SysV service '/etc/init.d/dropbear' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.534616] systemd-sysv-generator[153]: SysV service '/etc/init.d/psplash.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.560641] systemd-sysv-generator[153]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.585385] systemd-sysv-generator[153]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.611895] systemd-sysv-generator[153]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.637927] systemd-sysv-generator[153]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 5.113386] systemd[1]: Configuration file /etc/systemd/system/ti-apps-launcher.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 5.217481] systemd[1]: /lib/systemd/system/startwlansta.service:7: Unknown key name 'After' in section 'Service', ignoring. [ 5.233713] systemd[1]: /lib/systemd/system/startwlanap.service:7: Unknown key name 'After' in section 'Service', ignoring. [ 5.301626] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 5.398997] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 5.532161] systemd[1]: Queued start job for default target Graphical Interface. [ 5.678865] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 5.706068] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 5.730122] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 5.757479] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.778982] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.802781] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.827141] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 5.846511] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.866624] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 5.886610] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 5.996124] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 6.019268] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 6.067582] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 6.092290] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 6.118458] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 6.144071] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 6.169388] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 6.194593] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 6.221936] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 6.244670] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 6.269080] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 6.339132] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 6.367941] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 6.427199] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 6.451711] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.503091] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 6.542419] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 6.599430] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 6.634774] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 6.663470] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 6.850626] fuse: init (API version 7.37) [ 6.879770] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 6.959666] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 6.975241] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 6.999634] systemd[1]: Starting Journal Service... Starting Journal Service... [ 7.083610] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 7.115427] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel command line... [ 7.147501] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 7.179102] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 7.190110] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 7.190859] cryptodev: loading out-of-tree module taints kernel. [ 7.204990] cryptodev: driver 1.12 loaded. [ 7.211387] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System. [ 7.267753] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 7.287347] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 7.311312] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 7.335308] systemd[1]: Mounted Temporary Directory /tmp. [ OK ] Mounted Temporary Directory /tmp. [ 7.360702] systemd[1]: Finished Create List of Static Device Nodes. [ OK ] Finished Create List of Static Device Nodes. [ 7.383821] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 7.393052] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 7.415318] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Apply Kernel Variables... [ 7.740204] systemd-journald[169]: Received client request to flush runtime journal. Starting Create System Users... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... [ 8.049826] audit: type=1334 audit(1651167749.848:2): prog-id=5 op=LOAD [ 8.056640] audit: type=1334 audit(1651167749.856:3): prog-id=6 op=LOAD Starting Rule-based Manage…for Device Events and Files... [ OK ] Finished Coldplug All udev Devices. [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Create Volatile Files and Directories... [ OK ] Finished Create Volatile Files and Directories. Starting Rebuild Journal Catalog... Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Finished Rebuild Journal Catalog. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Started Rule-based Manager for Device Events and Files. [ 9.062228] random: crng init done [ OK ] Found device /dev/ttyS2. [ OK ] Finished Load/Save Random Seed. [ 9.533295] k3-m4-rproc 5000000.m4fss: assigned reserved memory node m4f-dma-memory@9cb00000 [ 9.542081] k3-m4-rproc 5000000.m4fss: configured M4 for remoteproc mode [ 9.549243] k3-m4-rproc 5000000.m4fss: local reset is deasserted for device [ 9.556662] remoteproc remoteproc0: 5000000.m4fss is available [ 9.575722] platform 31000000.usb: Fixed dependency cycle(s) with /bus@f0000/i2c@20000000/tps6598x@3f/connector [ 9.638436] rtc-ti-k3 2b1f0000.rtc: registered as rtc0 [ 9.643796] rtc-ti-k3 2b1f0000.rtc: setting system clock to 1970-01-01T00:00:15 UTC (15) [ 9.655208] systemd-journald[169]: Time jumped backwards, rotating. [ 9.704019] mc: Linux media interface: v0.10 [ 10.144267] remoteproc remoteproc0: powering up 5000000.m4fss [ 10.150267] remoteproc remoteproc0: Booting fw image am62-mcu-m4f0_0-fw, size 54860 [ 10.164164] rproc-virtio rproc-virtio.1.auto: assigned reserved memory node m4f-dma-memory@9cb00000 [ 10.179894] virtio_rpmsg_bus virtio0: rpmsg host is online [ 10.180407] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xd [ 10.187712] rproc-virtio rproc-virtio.1.auto: registered virtio0 (type 7) [ 10.193790] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xe [ 10.200081] remoteproc remoteproc0: remote processor 5000000.m4fss is now up [ 10.214757] PVR_K: 212: Device: fd00000.gpu [ 10.216529] videodev: Linux video capture interface: v2.00 [ 10.219149] platform 78000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 10.219520] PVR_K: 212: Read BVNC 33.15.11.3 from HW device registers [ 10.224670] PVR_K: 212: RGX Device registered with BVNC 33.15.11.3 [ 10.237314] platform 78000000.r5f: configured R5F for IPC-only mode [ 10.245818] [drm] Initialized pvr 23.1.6404501 20170530 for fd00000.gpu on minor 0 [ 10.249569] platform 78000000.r5f: assigned reserved memory node r5f-dma-memory@9da00000 [ 10.265253] remoteproc remoteproc1: 78000000.r5f is available [ 10.277446] remoteproc remoteproc1: attaching to 78000000.r5f [ 10.284415] platform 78000000.r5f: R5F core initialized in IPC-only mode [ 10.291346] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node r5f-dma-memory@9da00000 [ 10.304046] virtio_rpmsg_bus virtio1: rpmsg host is online [ 10.304205] virtio_rpmsg_bus virtio1: creating channel ti.ipc4.ping-pong addr 0xd [ 10.309819] rproc-virtio rproc-virtio.2.auto: registered virtio1 (type 7) [ 10.321706] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xe [ 10.324234] remoteproc remoteproc1: remote processor 78000000.r5f is now attached [ 11.365165] remoteproc remoteproc2: 30074000.pru is available [ 11.372327] remoteproc remoteproc3: 30078000.pru is available [ OK ] Reached target Hardware activated USB gadget. [ 11.707639] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 11.713290] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1 [ 11.721288] xhci-hcd xhci-hcd.3.auto: USB3 root hub has no ports [ 11.727375] xhci-hcd xhci-hcd.3.auto: hcc params 0x0258fe6d hci version 0x110 quirks 0x0000000000010010 [ 11.736992] xhci-hcd xhci-hcd.3.auto: irq 456, io mem 0x31100000 [ 11.745091] hub 1-0:1.0: USB hub found [ 11.749062] hub 1-0:1.0: 1 port detected [ 11.957511] cdns-csi2rx: probe of 30101000.csi-bridge failed with error -22 Starting Start psplash boot splash screen... [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Created slice Slice /system/systemd-fsck. [ OK ] Found device /dev/mmcblk0p1. Starting File System Check on /dev/mmcblk0p1... [ OK ] Finished File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... [ 14.362852] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none. [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/boot-mmcblk1p1... [ OK ] Mounted /run/media/boot-mmcblk1p1. [ **] A start job is running for Rebuild …namic Linker Cache (9s / no limit) [ 22.182089] platform fa20000.mmc: deferred probe pending [ 22.187480] platform 30200000.dss: deferred probe pending [ 22.192941] platform regulator-6: deferred probe pending [ 22.198309] platform regulator-7: deferred probe pending [ 22.204094] platform regulator-8: deferred probe pending [ OK ] Finished Rebuild Dynamic Linker Cache. Starting Run pending postinsts... Starting Update is Completed... [ OK ] Finished Update is Completed. [ OK ] Finished Run pending postinsts. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. Starting Weston socket... Starting D-Bus System Message Bus... Starting Reboot and dump vmcore via kexec... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on Weston socket. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Reached target Socket Units. [ OK ] Started D-Bus System Message Bus. [ OK ] Reached target Basic System. Starting Save/Restore Sound Card State... [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting startwlanap... Starting startwlansta... [ 29.307055] audit: type=1334 audit(35.160:4): prog-id=7 op=LOAD [ 29.313231] audit: type=1334 audit(35.164:5): prog-id=8 op=LOAD Starting User Login Management... [ OK ] Started TEE Supplicant. Starting telnetd.service... [ OK ] Started ti-apps-launcher service. [ OK ] Finished Save/Restore Sound Card State. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Started startwlanap. [ OK ] Started startwlansta. [ OK ] Reached target Preparation for Network. [ OK ] Reached target Sound Card. Starting Network Configuration... [ OK ] Started telnetd.service. Starting LSB: Expand Rootfs of boot device... [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ 29.812273] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 29.837891] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK ] Started Network Configuration. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ 30.905491] am65-cpsw-nuss 8000000.ethernet eth0: PHY [8000f00.mdio:00] driver [TI DP83867] (irq=POLL) [ 30.914926] am65-cpsw-nuss 8000000.ethernet eth0: configuring for phy/rgmii-rxid link mode [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [ OK ] Finished Enable and configure wl18xx bluetooth stack. [ OK ] Finished Permit User Sessions. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ 32.097871] startwlanap.sh[745]: sed: unmatched '/' [ OK ] Finished Synchronize System and HW clocks. [ 32.245085] startwlanap.sh[746]: adding wlan1 interface [ 32.258031] startwlanap.sh[748]: command failed: No such file or directory (-2) [ 33.476396] startwlanap.sh[749]: Line 499: unknown configuration item 'wep_rekey_period' [ 33.477418] startwlanap.sh[749]: 1 errors found in configuration file '/usr/share/wl18xx/hostapd.conf' [ 33.477972] startwlanap.sh[749]: Failed to set up interface with /usr/share/wl18xx/hostapd.conf [ 33.478465] startwlanap.sh[749]: Failed to initialize interface [ 33.499734] startwlanap.sh[753]: SIOCSIFADDR: No such device [ 33.518129] startwlanap.sh[753]: wlan1: ERROR while getting interface flags: No such device [ 33.528582] startwlanap.sh[753]: SIOCSIFNETMASK: No such device [ 33.547045] startwlanap.sh[753]: wlan1: ERROR while getting interface flags: No such device [ 37.338909] audit: type=1701 audit(43.192:6): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=775 comm="kmsprint" exe="/usr/bin/kmsprint" sig=6 res=1 [ 37.568030] EXT4-fs (mmcblk1p2): resizing filesystem from 2358498 to 3856512 blocks [ 38.488358] audit: type=1334 audit(44.340:7): prog-id=9 op=LOAD [ 38.494470] audit: type=1334 audit(44.348:8): prog-id=10 op=LOAD _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project am62xx-evm - Arago 2023.04 am62xx-evm - am62xx-evm login: [ 38.712353] audit: type=1325 audit(44.472:9): table=nat family=2 entries=0 op=xt_register pid=770 comm="iptables" [ 38.722739] audit: type=1300 audit(44.472:9): arch=c00000b7 syscall=209 success=yes exit=0 a0=4 a1=0 a2=40 a3=ffffd7a9b3b8 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 38.751412] audit: type=1327 audit(44.472:9): proctitle=69707461626C6573002D74006E6174002D4100504F5354524F5554494E47002D6F0065746830002D6A004D415351554552414445 [ 38.765859] audit: type=1325 audit(44.564:10): table=nat family=2 entries=5 op=xt_replace pid=770 comm="iptables" [ 38.776162] audit: type=1300 audit(44.564:10): arch=c00000b7 syscall=208 success=yes exit=0 a0=4 a1=0 a2=40 a3=11c3b210 items=0 ppid=746 pid=770 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/sbin/xtables-legacy-multi" key=(null) [ 38.804122] audit: type=1327 audit(44.564:10): proctitle=69707461626C6573002D74006E6174002D4100504F5354524F5554494E47002D6F0065746830002D6A004D415351554552414445 [ 40.898363] startwlanap.sh[786]: iperf3: error - unable to start listener for connections: Cannot assign requested address [ 40.899577] startwlanap.sh[786]: iperf3: exiting [ 42.611286] EXT4-fs (mmcblk1p2): resized filesystem to 3856512 [ 44.290446] audit: type=1334 audit(50.144:11): prog-id=10 op=UNLOAD [ 44.296902] audit: type=1334 audit(50.144:12): prog-id=9 op=UNLOAD am62xx-evm login: root [ 58.110599] audit: type=1334 audit(63.964:13): prog-id=11 op=LOAD [ 58.117635] audit: type=1334 audit(63.968:14): prog-id=12 op=LOAD [ 59.029896] audit: type=1006 audit(64.880:15): pid=816 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ 59.041804] audit: type=1300 audit(64.880:15): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe93b6558 a2=1 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 59.066593] audit: type=1327 audit(64.880:15): proctitle="(systemd)" [ 59.135713] audit: type=1334 audit(64.988:16): prog-id=13 op=LOAD [ 59.141905] audit: type=1300 audit(64.988:16): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=fffff1a22620 a2=78 a3=0 items=0 ppid=1 pid=816 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="systemd" exe="/lib/systemd/systemd" key=(null) [ 59.166775] audit: type=1327 audit(64.988:16): proctitle="(systemd)" [ 59.173277] audit: type=1334 audit(64.988:17): prog-id=13 op=UNLOAD [ 59.179625] audit: type=1334 audit(64.988:18): prog-id=14 op=LOAD root@am62xx-evm:~# [ 66.988799] kauditd_printk_skb: 3 callbacks suppressed