NOTICE: BL31: v2.3():07.01.00.006-dirty NOTICE: BL31: Built : 03:49:38, Jan 25 2021 M/TC: 01.02 OP-TEE version: 3.16.0-dev (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #1 Mon Oct 24 07:34:05 UTC 2022 aarch64 M/TC: DKEK CRC32 OK! U-Boot 2020.01 (Apr 19 2023 - 04:06:57 +0000) 4 GiB Flash: 0 Bytes MMC: sdhci@4f80000: 0 serial@2800000 serial@2800000 serial@2800000 uboot B 0:2 No ethernet found. Autoboot in 2 seconds [UBOOT] boot partiontion: 0 acu board_id: 4300,vehicle_id : 4310 master tda4vm/h,which_dtb = 5 switch to partitions #0, OK mmc0(part 0) is current device MMC read: dev # 0, block # 0, count 1 ... 1 blocks read: OK partition_mode 0 Start from partition B. switch to partitions #0, OK mmc0(part 0) is current device MMC read: dev # 0, block # 65536, count 1 ... 1 blocks read: OK MMC read: dev # 0, block # 65536, count 36332 ... 36332 blocks read: OK ## Loading kernel from FIT Image at 8a000000 ... Using 'conf-5' configuration Verifying Hash Integrity ... sha1,rsa2048:dev+ OK Trying 'kernel' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x8a0000e0 Data Size: 17991688 Bytes = 17.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80080000 Entry Point: 0x80080000 Hash algo: sha1 Hash value: 4d5c7478475fc6c7f7a1b2074e336cc08d64b9fa Verifying Hash Integrity ... sha1+ OK ## Loading fdt from FIT Image at 8a000000 ... Using 'conf-5' configuration Verifying Hash Integrity ... sha1,rsa2048:dev+ OK Trying 'fdt-5' fdt subimage Description: Flattened Device Tree blob ford Type: Flat Device Tree Compression: uncompressed Data Start: 0x8b1a3fc4 Data Size: 100136 Bytes = 97.8 KiB Architecture: AArch64 Hash algo: sha1 Hash value: 1cd0e07afc2ff023fe9cc9ff2606e9e2086def9e Verifying Hash Integrity ... sha1+ OK Booting using the fdt blob at 0x8b1a3fc4 Loading Kernel Image regions overlapERROR: reserving fdt memory region failed (addr=fdc00000 size=400000) Loading Device Tree to 000000008ffe4000, end 000000008ffff727 ... OK fdt_chosen: line 318 board_id 4300 fdt bootargs: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 default_hugepagesz=2M hugepagesz=2M mtdparts=47040000.spi.0:512k(ospi.sbl),512k(ospi.tifs_a),512k(ospi.tifs_b),4m(ospi.mcufw_a),4m(ospi.mcufw_b),4m(ospi.combine_a),4m(ospi.combine_b),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.misc_a),128k(ospi.misc_b),128k(ospi.factory),128k(ospi.safe_a),128k(ospi.safe_b),256k(ospi.sonardata),2m(ospi.mcudata),128k(ospi.imudata),128k(ospi.pstore),2m(ospi.reserved),128k@0x3fe0000(ospi.patterns),64m@0(ospi.whole_spi) blkdevparts=mmcblk0:32M(RECOVERY-A),32M(RECOVERY-B),1000M(OS-A),1000M(OS-B),5000M(APP-A),5000M(APP-B),6000M(CACHE),100M(PROFILE),2200M(LOG),-(DATA) loglevel=7 lpj=800000 final bootargs: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 default_hugepagesz=2M hugepagesz=2M mtdparts=47040000.spi.0:512k(ospi.sbl),512k(ospi.tifs_a),512k(ospi.tifs_b),4m(ospi.mcufw_a),4m(ospi.mcufw_b),4m(ospi.combine_a),4m(ospi.combine_b),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.misc_a),128k(ospi.misc_b),128k(ospi.factory),128k(ospi.safe_a),128k(ospi.safe_b),256k(ospi.sonardata),2m(ospi.mcudata),128k(ospi.imudata),128k(ospi.pstore),2m(ospi.reserved),128k@0x3fe0000(ospi.patterns),64m@0(ospi.whole_spi) blkdevparts=mmcblk0:32M(RECOVERY-A),32M(RECOVERY-B),1000M(OS-A),1000M(OS-B),5000M(APP-A),5000M(APP-B),6000M(CACHE),100M(PROFILE),2200M(LOG),-(DATA) loglevel=7 lpj=800000 acu_boot_index=0 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 5.4.74-ACU-10.0.75.1 (root@bjlsh-bcc-magellan-cce2-bcloud-user-26-2.bcc-bjlsh) (gcc version 9.2.1 20191025 (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10))) #4 SMP PREEMPT Wed Apr 19 04:04:29 UTC 2023 [ 0.000000] Machine model: Texas Instruments K3 J721E SoC [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] OF: reserved mem: not enough space all defined regions. [ 0.000000] OF: reserved mem: not enough space all defined regions. [ 0.000000] OF: reserved mem: not enough space all defined regions. [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000094000000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@94000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-memory@a3100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5800000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-dma-memory@a5800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5900000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-memory@a5900000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-dma-memory@ac000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ce000000, size 6 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@ce000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d2000000, size 48 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@d2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d5000000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@d5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d8000000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@d8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000d9000000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@d9000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000dc000000, size 128 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@dc000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000f0000000, size 40 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@f0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fa000000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-core-heap-memory@fa000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fb000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-dma-memory@fb000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fb100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision_apps-r5f-memory@fb100000, compatible id shared-dma-pool [ 0.000000] cma: Failed to reserve 512 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 2 pages/cpu s48472 r8192 d74408 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 34467 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 default_hugepagesz=2M hugepagesz=2M mtdparts=47040000.spi.0:512k(ospi.sbl),512k(ospi.tifs_a),512k(ospi.tifs_b),4m(ospi.mcufw_a),4m(ospi.mcufw_b),4m(ospi.combine_a),4m(ospi.combine_b),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.reserved),128k(ospi.misc_a),128k(ospi.misc_b),128k(ospi.factory),128k(ospi.safe_a),128k(ospi.safe_b),256k(ospi.sonardata),2m(ospi.mcudata),128k(ospi.imudata),128k(ospi.pstore),2m(ospi.reserved),128k@0x3fe0000(ospi.patterns),64m@0(ospi.whole_spi) blkdevparts=mmcblk0:32M(RECOVERY-A),32M(RECOVERY-B),1000M(OS-A),1000M(OS-B),5000M(APP-A),5000M(APP-B),6000M(CACHE),100M(PROFILE),2200M(LOG),-(DATA) loglevel=7 lpj=800000 acu_boot_index=0 [ 0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x90000000-0x94000000] (64MB) [ 0.000000] Memory: 2858880K/2209664K available (9662K kernel code, 802K rwdata, 3840K rodata, 2880K init, 691K bss, 18446744073708902400K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: no VLPI support, no direct LPI support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008c00c0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008c00d0000 [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x43c with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000001] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008331] Console: colour dummy device 80x25 [ 0.012885] Calibrating delay loop (skipped) preset value.. 400.00 BogoMIPS (lpj=800000) [ 0.021155] pid_max: default: 32768 minimum: 301 [ 0.025901] LSM: Security Framework initializing [ 0.030644] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.038212] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear) [ 0.046997] ASID allocator initialised with 32768 entries [ 0.052566] rcu: Hierarchical SRCU implementation. [ 0.057568] Platform MSI: gic-its@1820000 domain created [ 0.063091] PCI/MSI: /bus@100000/interrupt-controller@1800000/gic-its@1820000 domain created [ 0.071855] smp: Bringing up secondary CPUs ... [ 0.077077] Detected PIPT I-cache on CPU1 [ 0.077092] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.077102] GICv3: CPU1: using allocated LPI pending table @0x00000008c00e0000 [ 0.077120] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.077158] smp: Brought up 1 node, 2 CPUs [ 0.106502] SMP: Total of 2 processors activated. [ 0.111306] CPU features: detected: 32-bit EL0 Support [ 0.116558] CPU features: detected: CRC32 instructions [ 0.127918] CPU: All CPU(s) started at EL2 [ 0.132108] alternatives: patching kernel code [ 0.137033] devtmpfs: initialized [ 0.144538] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.154501] futex hash table entries: 512 (order: -1, 32768 bytes, linear) [ 0.161709] pinctrl core: initialized pinctrl subsystem [ 0.167384] NET: Registered protocol family 16 [ 0.172189] DMA: preallocated 256 KiB pool for atomic allocations [ 0.178680] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.185986] pstore: Registered ramoops as persistent store backend [ 0.192301] ramoops: using 0x20000@0xfdb00000, ecc: 0 [ 0.203274] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.210126] HugeTLB registered 16.0 GiB page size, pre-allocated 0 pages [ 0.216974] HugeTLB registered 512 MiB page size, pre-allocated 0 pages [ 0.224859] cryptd: max_cpu_qlen set to 1000 [ 0.230822] iommu: Default domain type: Translated [ 0.235916] SCSI subsystem initialized [ 0.239852] mc: Linux media interface: v0.10 [ 0.244231] videodev: Linux video capture interface: v2.00 [ 0.249841] pps_core: LinuxPPS API ver. 1 registered [ 0.254910] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.264246] PTP clock support registered [ 0.268256] EDAC MC: Ver: 3.0.0 [ 0.271832] FPGA manager framework [ 0.275637] clocksource: Switched to clocksource arch_sys_counter [ 0.281917] VFS: Disk quotas dquot_6.6.0 [ 0.285965] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 0.295242] Carveout Heap: Exported 512 MiB at 0x00000000ae000000 [ 0.301471] thermal_sys: Registered thermal governor 'step_wise' [ 0.301472] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307867] NET: Registered protocol family 2 [ 0.319173] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear) [ 0.327930] TCP established hash table entries: 32768 (order: 2, 262144 bytes, linear) [ 0.336124] TCP bind hash table entries: 32768 (order: 3, 524288 bytes, linear) [ 0.343812] TCP: Hash tables configured (established 32768 bind 32768) [ 0.350528] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 0.357414] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear) [ 0.364790] NET: Registered protocol family 1 [ 0.369444] RPC: Registered named UNIX socket transport module. [ 0.375498] RPC: Registered udp transport module. [ 0.380301] RPC: Registered tcp transport module. [ 0.385104] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.391686] PCI: CLS 0 bytes, default 64 [ 0.422500] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.432143] Initialise system trusted keyrings [ 0.436732] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.445189] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.451341] NFS: Registering the id_resolver key type [ 0.456510] Key type id_resolver registered [ 0.460779] Key type id_legacy registered [ 0.464874] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.471720] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.478505] 9p: Installing v9fs 9p2000 file system support [ 0.490951] Key type asymmetric registered [ 0.495139] Asymmetric key parser 'x509' registered [ 0.500135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.507694] io scheduler mq-deadline registered [ 0.512320] io scheduler kyber registered [ 0.517167] pinctrl-single 4301c000.pinmux: 94 pins, size 376 [ 0.523200] pinctrl-single 11c000.pinmux: 173 pins, size 692 [ 0.530408] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.536661] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.542965] ti-pat 31010000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.549374] debugfs: Directory '31010000.pat' with parent 'regmap' already present! [ 0.557301] ti-pat 31011000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.563710] debugfs: Directory '31011000.pat' with parent 'regmap' already present! [ 0.571614] ti-pat 31012000.pat: Found PAT Rev 1.0 with 16384 pages [ 0.578023] debugfs: Directory '31012000.pat' with parent 'regmap' already present! [ 0.585930] ti-pat 31013000.pat: Found PAT Rev 1.0 with 2048 pages [ 0.592252] debugfs: Directory '31013000.pat' with parent 'regmap' already present! [ 0.600159] ti-pat 31014000.pat: Found PAT Rev 1.0 with 2048 pages [ 0.606480] debugfs: Directory '31014000.pat' with parent 'regmap' already present! [ 0.615604] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.626640] brd: module loaded [ 0.632402] loop: module loaded [ 0.635626] mtip32xx Version 1.3.1 [ 0.639287] sysfs: cannot create duplicate filename '/devices/platform/dma_buf_phys' [ 0.647207] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.74-ACU-10.0.75.1 #4 [ 0.654494] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 0.660448] Call trace: [ 0.662943] dump_backtrace+0x0/0x140 [ 0.666677] show_stack+0x14/0x20 [ 0.670058] dump_stack+0xb4/0x114 [ 0.673527] sysfs_warn_dup+0x5c/0x78 [ 0.677260] sysfs_create_dir_ns+0xd8/0xf0 [ 0.681440] kobject_add_internal+0x94/0x280 [ 0.685797] kobject_add+0x90/0xf8 [ 0.689266] device_add+0xdc/0x600 [ 0.692735] platform_device_add+0xfc/0x228 [ 0.697001] platform_device_register_full+0xc8/0x140 [ 0.702158] dma_buf_phys_init+0x68/0x94 [ 0.706159] do_one_initcall+0x50/0x1a8 [ 0.710073] kernel_init_freeable+0x194/0x23c [ 0.714519] kernel_init+0x10/0xfc [ 0.717986] ret_from_fork+0x10/0x1c [ 0.721642] kobject_add_internal failed for dma_buf_phys with -EEXIST, don't try to register things with the same name in the same directory. [ 0.735372] libphy: Fixed MDIO Bus: probed [ 0.739742] tun: Universal TUN/TAP device driver, 1.6 [ 0.745071] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.753074] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.759132] sky2: driver version 1.30 [ 0.763186] VFIO - User Level meta-driver version: 0.3 [ 0.768694] i2c /dev entries driver [ 0.772477] Error: Driver 'k3-soc-thermal' is already registered, aborting... [ 0.779933] sdhci: Secure Digital Host Controller Interface driver [ 0.786248] sdhci: Copyright(c) Pierre Ossman [ 0.790805] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.796902] ledtrig-cpu: registered to indicate activity on CPUs [ 0.803505] optee: probing for conduit method from DT. [ 0.808768] optee: revision 3.16 (d0b742d1) [ 0.808971] optee: initialized driver [ 0.817322] NET: Registered protocol family 17 [ 0.821923] 9pnet: Installing 9P2000 support [ 0.826303] Key type dns_resolver registered [ 0.830784] registered taskstats version 1 [ 0.834970] Loading compiled-in X.509 certificates [ 0.839892] Key type ._fscrypt registered [ 0.843986] Key type .fscrypt registered [ 0.848633] pstore: Using crash dump compression: deflate [ 0.855803] k3-ringacc 2b800000.ringacc: Failed to get MSI domain [ 0.862114] k3-ringacc 3c000000.ringacc: Failed to get MSI domain [ 0.869180] ti-sci 44083000.dmsc: ABI: 3.1 (firmware rev 0x0014 '20.8.7--v2020.08d (Terrific Lla') [ 0.905883] random: fast init done [ 0.928269] ti-sci-intr bus@100000:interrupt-controller0: Interrupt Router 131 domain created [ 0.937118] ti-sci-intr bus@100000:navss@30000000:interrupt-controller1: Interrupt Router 213 domain created [ 0.947391] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created [ 0.963829] cdns-torrent-phy 5050000.serdes: 4 lanes, max bit rate 5.400 Gbps [ 0.971682] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 [ 0.981554] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 0.988312] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 0.997194] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 [ 1.007333] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 1.014092] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 [ 1.021902] printk: console [ttyS2] disabled [ 1.026279] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 11, base_baud = 3000000) is a 8250 [ 1.035010] printk: console [ttyS2] enabled [ 1.035010] printk: console [ttyS2] enabled [ 1.043444] printk: bootconsole [ns16550a0] disabled [ 1.043444] printk: bootconsole [ns16550a0] disabled [ 1.053813] arm-smmu-v3 36600000.smmu: ias 48-bit, oas 48-bit (features 0x00001faf) [ 1.063413] arm-smmu-v3 36600000.smmu: allocated 524288 entries for cmdq [ 1.072147] arm-smmu-v3 36600000.smmu: allocated 524288 entries for evtq [ 1.079485] arm-smmu-v3 36600000.smmu: msi_domain absent - falling back to wired irqs [ 1.090051] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010a, freq:200000000, add_val:4 pps:0 [ 1.098431] value of fuse 0 is 0x2eb6cb2d [ 1.102431] value of fuse 1 is 0x96df85c2 [ 1.106427] value of fuse 2 is 0x99d97bbd [ 1.110423] value of fuse 3 is 0x19d9b9 [ 1.114249] k3_bandgap_probe and count is 5 [ 1.118420] id is 0 and i is 0 and err is -19 [ 1.122764] id is 0 and i is 1 and err is -53 [ 1.127107] id is 0 and i is 2 and err is -62 [ 1.131451] The errors in adc code for -40C, 30C & 125C 150C respectively:: -19 -53 -28 0 [ 1.139607] slope m1::-7 and const c1::-118 [ 1.143778] slope m2::19 and const c2::1262 [ 1.147951] slope m3::7 and const c3::926 [ 1.151974] id is 1 and i is 0 and err is -20 [ 1.156318] id is 1 and i is 1 and err is -50 [ 1.160661] id is 1 and i is 2 and err is -62 [ 1.165018] id is 2 and i is 0 and err is -20 [ 1.169364] id is 2 and i is 1 and err is -52 [ 1.173707] id is 2 and i is 2 and err is -73 [ 1.178064] id is 3 and i is 0 and err is -19 [ 1.182407] id is 3 and i is 1 and err is -51 [ 1.186750] id is 3 and i is 2 and err is -14 [ 1.191108] id is 4 and i is 0 and err is -18 [ 1.195452] id is 4 and i is 1 and err is -50 [ 1.199795] id is 4 and i is 2 and err is -69 [ 1.204154] Value of CTRLMMR_WKUP_RESET_SRC_STAT Register is 0x800 [ 1.210319] high_max is 742 and low_max is 736 and regval is 0x2e002e6 [ 1.317882] Value of WKUP_VTM_MISC_CTRL2 is 0x2e002e6 [ 1.322919] Value of WKUP_VTM_MISC_CTRL is 0x1 [ 1.327756] mmc0: CQHCI version 5.10 [ 1.372083] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit [ 1.385074] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc7100 [ 1.391988] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc7100 [ 1.398962] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fc7100 [ 1.405948] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fc7100 [ 1.412800] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fc7100 [ 1.422131] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) [ 1.432349] ti-udma 31150000.dma-controller: Channels: 84 (tchan: 42, rchan: 42, gp-rflow: 16) [ 1.445927] spi-nor spi0.0: Unknown command extension type [ 1.451411] spi-nor spi0.0: Unknown command extension type [ 1.466588] cadence-qspi 47040000.spi: PHY calibration failed: -2 [ 1.472674] spi-nor spi0.0: mt35xu256aba (32768 Kbytes) [ 1.477902] mtd: 47040000.spi.0: partitioning exceeds flash size, truncating [ 1.484943] mtd: 47040000.spi.0: partitioning exceeds flash size, truncating [ 1.492009] 22 cmdlinepart partitions found on MTD device 47040000.spi.0 [ 1.498700] Creating 22 MTD partitions on "47040000.spi.0": [ 1.504269] 0x000000000000-0x000000080000 : "ospi.sbl" [ 1.509851] 0x000000080000-0x000000100000 : "ospi.tifs_a" [ 1.515611] 0x000000100000-0x000000180000 : "ospi.tifs_b" [ 1.521369] 0x000000180000-0x000000580000 : "ospi.mcufw_a" [ 1.527253] 0x000000580000-0x000000980000 : "ospi.mcufw_b" [ 1.533101] 0x000000980000-0x000000d80000 : "ospi.combine_a" [ 1.539160] 0x000000d80000-0x000001180000 : "ospi.combine_b" [ 1.545245] 0x000001180000-0x0000011a0000 : "ospi.reserved" [ 1.551176] 0x0000011a0000-0x0000011c0000 : "ospi.reserved" [ 1.557147] 0x0000011c0000-0x0000011e0000 : "ospi.reserved" [ 1.563307] mmc0: Command Queue Engine enabled [ 1.567746] mmc0: new HS200 MMC card at address 0001 [ 1.572783] 0x0000011e0000-0x000001200000 : "ospi.misc_a" [ 1.578419] mmcblk0: mmc0:0001 CJUD4R 59.6 GiB [ 1.583020] mmcblk0boot0: mmc0:0001 CJUD4R partition 1 31.9 MiB [ 1.589087] mmcblk0boot1: mmc0:0001 CJUD4R partition 2 31.9 MiB [ 1.595266] 0x000001200000-0x000001220000 : "ospi.misc_b" [ 1.600684] mmcblk0rpmb: mmc0:0001 CJUD4R partition 3 4.00 MiB, chardev (239:0) [ 1.608296] 0x000001220000-0x000001240000 : "ospi.factory" [ 1.614008] mmcblk0: p1(RECOVERY-A) p2(RECOVERY-B) p3(OS-A) p4(OS-B) p5(APP-A) p6(APP-B) p7(CACHE) p8(PROFILE) p9(LOG) p10(DATA) [ 1.625971] 0x000001240000-0x000001260000 : "ospi.safe_a" [ 1.631752] 0x000001260000-0x000001280000 : "ospi.safe_b" [ 1.638388] 0x000001280000-0x0000012c0000 : "ospi.sonardata" [ 1.644381] 0x0000012c0000-0x0000014c0000 : "ospi.mcudata" [ 1.650220] 0x0000014c0000-0x0000014e0000 : "ospi.imudata" [ 1.656027] 0x0000014e0000-0x000001500000 : "ospi.pstore" [ 1.661823] 0x000001500000-0x000001700000 : "ospi.reserved" [ 1.667726] 0x000003fe0000-0x000002000000 : "ospi.patterns" [ 1.673288] mtd: partition "ospi.patterns" is out of reach -- disabled [ 1.680173] 0x000000000000-0x000002000000 : "ospi.whole_spi" [ 1.687111] debugfs: Directory 'pd:242' with parent 'pm_genpd' already present! [ 1.694463] debugfs: Directory 'pd:241' with parent 'pm_genpd' already present! [ 1.701766] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! [ 1.709109] debugfs: Directory 'pd:239' with parent 'pm_genpd' already present! [ 1.716852] hctosys: unable to open rtc device (rtc0) [ 1.741606] Freeing unused kernel memory: 2880K [ 1.746154] Run /init as init process initramfs start.sh start open emmc device mount proc fs mount sysfs fs mount debugfs Booting from B part /dev/mmcblk0p4 [ 1.775557] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) mount -o ro /dev/mmcblk0p4 /mnt/root successfully[ 1.792222] platform 5c00000.r5f: configured R5F for remoteproc mode [ 1.799307] platform 5c00000.r5f: assigned reserved memory node vision_apps-r5f-dma-memory@a1000000 [ 1.808394] remoteproc remoteproc0: 5c00000.r5f is available [ 1.814629] platform 5d00000.r5f: configured R5F for remoteproc mode [ 1.821553] platform 5d00000.r5f: assigned reserved memory node r5f-dma-memory@a3000000 [ 1.829807] remoteproc remoteproc1: 5d00000.r5f is available [ 1.837502] platform 5e00000.r5f: configured R5F for remoteproc mode [ 1.844787] platform 5e00000.r5f: assigned reserved memory node vision_apps-r5f-dma-memory@a5000000 [ 1.854492] remoteproc remoteproc2: 5e00000.r5f is available [ 1.860801] platform 5f00000.r5f: configured R5F for remoteproc mode [ 1.868414] platform 5f00000.r5f: assigned reserved memory node vision_apps-r5f-dma-memory@a5800000 [ 1.878259] remoteproc remoteproc3: 5f00000.r5f is available [ 1.878272] remoteproc remoteproc0: powering up 5c00000.r5f [ 1.890440] remoteproc remoteproc0: Booting fw image j7-main-r5f0_0-fw, size 6754700 [ 1.901865] k3-dsp-rproc 4d80800000.dsp: assigned reserved memory node c66-dma-memory@a7000000 [ 1.902547] platform 5c00000.r5f: booting R5F core using boot addr = 0x0 [ 1.911354] k3-dsp-rproc 4d80800000.dsp: configured DSP for remoteproc mode [ 1.924371] remoteproc0#vdev0buffer: assigned reserved memory node vision_apps-r5f-dma-memory@a1000000 [ 1.925361] k3-dsp-rproc 4d80800000.dsp: local reset is deasserted for device [ 1.933804] remoteproc0#vdev0buffer: registered virtio0 (type 7) [ 1.941605] remoteproc remoteproc2: powering up 5e00000.r5f [ 1.947005] remoteproc remoteproc0: remote processor 5c00000.r5f is now up [ 1.959479] remoteproc remoteproc4: 4d80800000.dsp is available [ 1.960309] remoteproc remoteproc2: Booting fw image j7-main-r5f1_0-fw, size 4844472 [ 1.973209] k3-dsp-rproc 4d81800000.dsp: assigned reserved memory node c66-dma-memory@a6000000 [ 1.975631] platform 5e00000.r5f: booting R5F core using boot addr = 0x0 [ 1.988535] k3-dsp-rproc 4d81800000.dsp: configured DSP for remoteproc mode [ 1.995486] k3-dsp-rproc 4d81800000.dsp: local reset is deasserted for device [ 2.002794] remoteproc remoteproc5: 4d81800000.dsp is available [ 2.003892] remoteproc2#vdev0buffer: assigned reserved memory node vision_apps-r5f-dma-memory@a5000000 [ 2.018155] k3-dsp-rproc 64800000.dsp: assigned reserved memory node c71-dma-memory@a8000000 [ 2.019066] remoteproc2#vdev0buffer: registered virtio1 (type 7) [ 2.026965] remoteproc remoteproc4: powering up 4d80800000.dsp [ 2.033125] remoteproc remoteproc3: powering up 5f00000.r5f [ 2.038821] remoteproc remoteproc4: Booting fw image j7-c66_0-fw, size 2610588 [ 2.044594] remoteproc remoteproc3: Booting fw image j7-main-r5f1_1-fw, size 6645668 [ 2.059108] k3-dsp-rproc 64800000.dsp: configured DSP for remoteproc mode [ 2.059390] remoteproc remoteproc1: powering up 5d00000.r5f [ 2.067056] k3-dsp-rproc 4d80800000.dsp: booting DSP core using boot addr = 0xa6200000 [ 2.071494] remoteproc remoteproc2: remote processor 5e00000.r5f is now up [ 2.079858] remoteproc remoteproc6: 64800000.dsp is available [ 2.086240] remoteproc remoteproc1: Booting fw image j7-main-r5f0_1-fw, size 13374256 [ 2.100719] remoteproc4#vdev0buffer: assigned reserved memory node c66-dma-memory@a7000000 [ 2.102312] platform 5f00000.r5f: booting R5F core using boot addr = 0x0 [ 2.112084] remoteproc4#vdev0buffer: registered virtio2 (type 7) [ 2.120069] platform 5d00000.r5f: booting R5F core using boot addr = 0x0 [ 2.129537] remoteproc3#vdev0buffer: assigned reserved memory node vision_apps-r5f-dma-memory@a5800000 [ 2.138978] remoteproc1#vdev0buffer: assigned reserved memory node r5f-dma-memory@a3000000 [ 2.139876] remoteproc remoteproc4: remote processor 4d80800000.dsp is now up [ 2.147394] remoteproc3#vdev0buffer: registered virtio3 (type 7) [ 2.160682] remoteproc1#vdev0buffer: registered virtio4 (type 7) [ 2.166829] remoteproc remoteproc1: remote processor 5d00000.r5f is now up [ 2.173746] remoteproc remoteproc3: remote processor 5f00000.r5f is now up [ 2.174631] virtio_rpmsg_bus virtio0: rpmsg host is online [ 2.187416] virtio_rpmsg_bus virtio1: rpmsg host is online [ 2.188666] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.193707] virtio_rpmsg_bus virtio2: rpmsg host is online [ 2.200118] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.206021] remoteproc remoteproc5: powering up 4d81800000.dsp [ 2.212730] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.219210] virtio_rpmsg_bus virtio3: rpmsg host is online [ 2.225691] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.231466] remoteproc remoteproc5: Booting fw image j7-c66_1-fw, size 11970064 [ 2.238081] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.245581] remoteproc remoteproc6: powering up 64800000.dsp [ 2.253001] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.258645] remoteproc remoteproc6: Booting fw image j7-c71_0-fw, size 10100720 [ 2.265062] virtio_rpmsg_bus virtio4: rpmsg host is online [ 2.273944] k3-dsp-rproc 64800000.dsp: booting DSP core using boot addr = 0xa8200000 [ 2.277514] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.286295] k3-dsp-rproc 4d81800000.dsp: booting DSP core using boot addr = 0xa7200000 [ 2.292504] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.308013] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.314120] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.321271] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.329027] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.335132] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.342535] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.342632] remoteproc5#vdev0buffer: assigned reserved memory node c66-dma-memory@a6000000 [ 2.350280] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.350351] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.358650] remoteproc6#vdev0buffer: assigned reserved memory node c71-dma-memory@a8000000 [ 2.364723] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.380508] virtio_rpmsg_bus virtio5: rpmsg host is online [ 2.387887] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.387895] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.393696] virtio_rpmsg_bus virtio6: rpmsg host is online [ 2.399445] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.406768] remoteproc6#vdev0buffer: registered virtio5 (type 7) [ 2.412020] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.412028] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.420216] remoteproc5#vdev0buffer: registered virtio6 (type 7) [ 2.426042] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.432937] remoteproc remoteproc5: remote processor 4d81800000.dsp is now up [ 2.438970] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.438981] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.445143] remoteproc remoteproc6: remote processor 64800000.dsp is now up [ 2.452699] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.473466] pvrsrvkm: loading out-of-tree module taints kernel. [ 2.479986] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.479997] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.506827] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.514552] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.520649] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.527696] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.527707] PVR_K: 143: Read BVNC 22.104.208.318 from HW device registers [ 2.535332] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.542199] PVR_K: 143: RGX Device registered with BVNC 22.104.208.318 [ 2.548266] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.555143] [drm] Initialized pvr 1.13.5776728 20170530 for 4e20000000.gpu on minor 0 [ 2.561973] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.577503] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed initramfs start.sh end[ 2.583595] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.592645] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.600528] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.606620] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.613663] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.621315] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.627408] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.634550] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.642281] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.648375] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.655513] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.663247] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.669338] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.676381] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.684028] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.690126] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.697264] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.705001] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.711097] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.718234] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.725965] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.732073] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 2.739116] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:d already exist [ 2.746761] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.752852] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x15 [ 2.759982] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:15 already exist [ 2.767716] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.773805] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0x46 [ 2.780936] virtio_rpmsg_bus virtio1: channel rpmsg_chrdev:ffffffff:46 already exist [ 2.788670] virtio_rpmsg_bus virtio1: rpmsg_create_channel failed [ 2.794773] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xd [ 2.801949] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd [ 2.809022] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0x15 [ 2.816257] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x15 [ 2.823511] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0xd [ 2.830576] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xe [ 2.838071] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x51 [ 2.845333] virtio_rpmsg_bus virtio4: creating channel rpmsg_chrdev addr 0x15 [ 2.852616] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0xd [ 2.859682] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x52 [ 2.866837] virtio_rpmsg_bus virtio4: creating channel ti.ipc4.ping-pong addr 0xe [ 2.874414] virtio_rpmsg_bus virtio5: creating channel rpmsg_chrdev addr 0x15 [ 2.881647] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x53 [ 2.888922] virtio_rpmsg_bus virtio5: creating channel ti.ipc4.ping-pong addr 0xe [ 2.896481] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x54 [ 2.903725] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0xd [ 2.910795] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0x55 [ 2.918004] virtio_rpmsg_bus virtio6: creating channel rpmsg_chrdev addr 0x15 [ 2.925299] virtio_rpmsg_bus virtio6: creating channel ti.ipc4.ping-pong addr 0xe [ 2.937850] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 2.945003] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0x15 [ 2.964385] systemd[1]: System time before build time, advancing clock. [ 2.987550] NET: Registered protocol family 10 [ 2.992311] Segment Routing with IPv6 [ 3.003233] systemd[1]: systemd 246 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP +GCRYPT +GNUTLS -ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 3.025181] systemd[1]: Detected architecture arm64. Welcome to Buildroot 2020.11.2! [ 3.063946] systemd[1]: Set hostname to . [ 3.070206] random: systemd: uninitialized urandom read (16 bytes read) [ 3.076817] systemd[1]: Initializing machine ID from random generator. [ 3.083385] systemd[1]: Installed transient /etc/machine-id file. [ 3.131463] systemd[1]: Configuration file /usr/lib/systemd/system/systemd-remount-fs.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.150504] systemd[1]: sysinit.target: Wants dependency dropin /etc/systemd/system/sysinit.target.wants/daemon_watch.service is not a symlink, ignoring. [ 3.200474] systemd[1]: Configuration file /etc/systemd/system/daemon_watch.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.215580] systemd[1]: /etc/systemd/system/daemon_watch.service:10: Support for option SysVStartPriority= has been removed and it is ignored [ 3.229360] systemd[1]: Queued start job for default target Multi-User System. [ 3.236821] random: systemd: uninitialized urandom read (16 bytes read) [ 3.243466] systemd[1]: system-serial\x2dgetty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.256677] virtio_rpmsg_bus virtio0: creating channel ti.ethfw.notifyservice addr 0x1e [ 3.259656] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.264729] virtio_rpmsg_bus virtio0: creating channel rpmsg-kdrv addr 0x1a [ 3.274115] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 3.280322] rpmsg-kdrv-eth-switch rpmsg-kdrv-2-mpu_1_0_ethswitch-device-0: Device info: permissions: 07FFFFFF uart_id: 6 [ 3.297244] rpmsg-kdrv-eth-switch rpmsg-kdrv-2-mpu_1_0_ethswitch-device-0: FW ver 0.1 (rev 1) 28/Mar/2023 SHA:f4517932 [ OK ] Created slice system-serial\x2dgetty.slice. [ 3.319704] random: systemd: uninitialized urandom read (16 bytes read) [ 3.326389] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 3.351739] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 3.375736] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 3.391690] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.411680] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 3.427692] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 3.446607] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 3.454650] systemd[1]: systemd-journald-dev-log.socket: Socket service systemd-journald.service not loaded, refusing. [ 3.465330] systemd[1]: Failed to listen on Journal Socket (/dev/log). [FAILED] Failed to listen on Journal Socket (/dev/log). See 'systemctl status systemd-journald-dev-log.socket' for details. [ 3.499688] systemd[1]: systemd-journald.socket: Socket service systemd-journald.service not loaded, refusing. [ 3.509678] systemd[1]: Failed to listen on Journal Socket. [FAILED] Failed to listen on Journal Socket. See 'systemctl status systemd-journald.socket' for details. [ 3.547912] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.563814] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.585503] systemd[1]: Mounting Huge Pages File System... [ 3.586091] systemd[160]: dev-hugepages.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory Mounting Huge Pages File System... [ 3.621395] systemd[1]: Mounting POSIX Message Queue File System... [ 3.622404] systemd[161]: dev-mqueue.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory Mounting POSIX Message Queue File System... [ 3.653451] systemd[1]: Mounting Kernel Debug File System... [ 3.654294] systemd[162]: sys-kernel-debug.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory Mounting Kernel Debug File System... [ 3.683819] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 3.694010] systemd[1]: Mounting Temporary Directory (/tmp)... [ 3.694429] systemd[163]: tmp.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory Mounting Temporary Directory (/tmp)... [ 3.719768] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 3.733552] systemd[1]: Starting Load Kernel Modules... [ 3.733636] systemd[164]: systemd-modules-load.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Load Kernel Modules... [ 3.765252] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.765758] systemd[165]: systemd-remount-fs.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Remount Root and Kernel File Systems... [ 3.797191] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.797588] systemd[166]: systemd-tmpfiles-setup-dev.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Create Static Device Nodes in /dev... [ 3.829467] systemd[1]: Starting Coldplug All udev Devices... [ 3.829809] systemd[167]: systemd-udev-trigger.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Coldplug All udev Devices... [ 3.865825] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System. [ 3.883971] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 3.903966] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 3.919890] systemd[1]: Mounted Temporary Directory (/tmp). [ OK ] Mounted Temporary Directory (/tmp). [ 3.944434] systemd[1]: Finished Load Kernel Modules. [ OK ] Finished Load Kernel Modules. [ 3.961503] systemd[168]: systemd-remount-fs.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 3.963384] systemd[169]: systemd-udev-trigger.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 3.974592] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 3.998016] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System.[ 4.006003] systemd[170]: sys-kernel-config.mount: Failed to connect stdout to the journal socket, ignoring: No such file or directory .. [ 4.035248] systemd[1]: Starting Apply Kernel Variables... [ 4.042642] systemd[173]: systemd-sysctl.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Apply Kernel Variables... [ 4.068965] systemd[1]: Mounted Kernel Configuration File System. [ OK [ 4.081726] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: discard ] Mounted Kernel Configuration File System. [ 4.102819] systemd[1]: Finished Apply Kernel Variables. [ OK ] Finished Apply Kernel Variables. [ 4.128770] systemd[1]: Finished Coldplug All udev Devices. [ OK ] Finished Coldplug All udev Devices 4.135444] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: discard 0m. [ 4.173678] systemd[1]: Finished Create Static Device Nodes in /dev. [ OK ] Finished Create Static Device Nodes in /dev. [ 4.187848] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: discard [ 4.196066] ext4 filesystem being mounted at /opt/profile supports timestamps until 2038 (0x7fffffff) [ 4.244307] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: discard [ 4.302418] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: discard [ 4.317849] EXT4-fs (mmcblk0p6): re-mounted. Opts: discard [ 4.325898] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) [ 4.333890] systemd[1]: Finished Remount Root and Kernel File Systems. [ OK ] Finished Remount Root and Kernel File Systems. [ 4.355890] systemd[1]: Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems (Pre). [ 4.375752] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 4.396178] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 4.406316] systemd[1]: Starting Flush Journal to Persistent Storage... [ 4.406656] systemd[208]: systemd-journal-flush.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Flush Journal to Persistent Storage... [ 4.435761] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 4.447481] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 4.447895] systemd[209]: systemd-udevd.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Rule-based Manage…for Device Events and Files... [ 4.484122] systemd[1]: systemd-journal-flush.service: Main process exited, code=exited, status=1/FAILURE [ 4.493876] systemd[1]: systemd-journal-flush.service: Failed with result 'exit-code'. [ 4.502427] systemd[1]: Failed to start Flush Journal to Persistent Storage. [FAILED] Failed to start Flush Journal to Persistent Storage. See 'systemctl status systemd-journal-flush.service' for details. [ 4.541649] systemd[1]: Starting Create Volatile Files and Directories... [ 4.542027] systemd[210]: systemd-tmpfiles-setup.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting Create Volatile Files and Directories... [ 4.585480] systemd[1]: Finished Create Volatile Files and Directories. [ OK ] Finished Create Volatile Files and Directories. [ 4.607992] systemd[1]: Started Rule-based Manager for Device Events and Files. [ OK ] Started Rule-based Manager for Device Events and Files. [ 4.631897] systemd[1]: Condition check resulted in Rebuild Journal Catalog being skipped. [ 4.640414] systemd[1]: Condition check resulted in Update is Completed being skipped. [ 4.648370] systemd[1]: Reached target System Initialization. [ OK ] Reached target System Initialization. [ 4.667963] systemd[1]: e2scrub_all.timer: Not using persistent file timestamp Fri 2021-01-01 00:00:43 CST as it is in the future. [ 4.685285] systemd[1]: Started Periodic ext4 Online Metadata Check for All Filesystems. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems. [ 4.715794] systemd[1]: Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily Cleanup of Temporary Directories. [ 4.735770] systemd[1]: Reached target Timers. [ OK ] Reached target Timers. [ 4.751955] systemd[1]: Listening on D-Bus System Message Bus Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ 4.771770] systemd[1]: Reached target Sockets. [ OK ] Reached target Sockets. [ 4.787803] systemd[1]: Reached target Basic System. [ OK ] Reached target Basic System. [ 4.808922] systemd[1]: Condition check resulted in /opt/gaia/daemon_watch_auto.sh Compatibility being skipped. [ 4.823223] systemd[1]: Started D-Bus System Message Bus. [ 4.823417] systemd[253]: dbus.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ OK ] Started D-Bus System Message Bus. [ 4.856938] systemd[1]: Starting /etc/rc.local Compatibility... [ 4.857221] systemd[261]: rc-local.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting /etc/rc.local Compatibility... [ 4.885397] systemd[1]: Starting OpenSSH server daemon... [ 4.885780] virtio_rpmsg_bus virtio0: creating channel ti.ipc4.ping-pong addr 0xe [ 4.893742] systemd[266]: sshd.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory Starting OpenSSH server daemon... [ 4.922444] systemd[1]: Found device /dev/ttyS2. [ OK ] Found device /dev/ttyS2. [ 5.099946] systemd[1]: Started /etc/rc.local Compatibility. [ OK ] Started /etc/rc.local Compatibility. [ 5.114159] ===whpdebug=== drivers/rpmsg-kdrv/rpmsg_kdrv.c:rpmsg_kdrv_cb rpmsg name: rpmsg-kdrv desc: [ 5.133539] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac loaded [ 5.173268] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: rdev_features:00000003 rdev_mtu:1522 flow_id:172 tx_psil_dst_id:4A00 [ 5.236247] remoteproc remoteproc7: b034000.pru is available [ 5.254404] pru-rproc b034000.pru: PRU rproc node /bus@100000/icssg@b000000/pru@34000 probed successfully [ 5.264405] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: local_mac_addr:00:00:00:00:00:00 rdev_mac_addr:00:00:00:00:00:04 [ 5.276688] remoteproc remoteproc8: b004000.rtu is available [ 5.285449] pru-rproc b004000.rtu: PRU rproc node /bus@100000/icssg@b000000/rtu@4000 probed successfully [ 5.295837] pru-rproc b00a000.txpru: IRQ vring not found [ 5.301196] pru-rproc b00a000.txpru: IRQ kick not found [ 5.306721] remoteproc remoteproc9: b00a000.txpru is available [ 5.313128] pru-rproc b00a000.txpru: PRU rproc node /bus@100000/icssg@b000000/txpru@a000 probed successfully [ 5.323405] remoteproc remoteproc10: b038000.pru is available [ 5.329233] systemd[1]: Started Serial Getty on ttyS2. [ 5.329246] pru-rproc b038000.pru: PRU rproc node /bus@100000/icssg@b000000/pru@38000 probed successfully [ 5.344120] remoteproc remoteproc11: b006000.rtu is available [ OK ] [ 5.349962] pru-rproc b006000.rtu: PRU rproc node /bus@100000/icssg@b000000/rtu@6000 probed successfully Started Serial Getty on ttyS2. [ 5.361179] pru-rproc b00c000.txpru: IRQ vring not found [ 5.370291] pru-rproc b00c000.txpru: IRQ kick not found [ 5.375533] remoteproc remoteproc12: b00c000.txpru is available [ 5.381513] pru-rproc b00c000.txpru: PRU rproc node /bus@100000/icssg@b000000/txpru@c000 probed successfully [ 5.381634] systemd[1]: Reached target Login Prompts. [ OK ] Reached target Login Prompts. [ 5.960727] cdns-usb3 6000000.usb: DRD version v1 (ID: 0004024e, rev: 00000200) [ 5.968624] cdns-usb3 6400000.usb: DRD version v1 (ID: 0004024e, rev: 00000200) [ 5.988399] usbcore: registered new interface driver usbfs [ 5.994193] usbcore: registered new interface driver hub [ 5.999937] usbcore: registered new device driver usb [ 6.010369] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.016836] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 6.025022] xhci-hcd xhci-hcd.0.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000000000010010 [ 6.034498] xhci-hcd xhci-hcd.0.auto: irq 476, io mem 0x06010000 [ 6.040668] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 6.048967] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.056231] usb usb1: Product: xHCI Host Controller [ 6.061135] usb usb1: Manufacturer: Linux 5.4.74-ACU-10.0.75.1 xhci-hcd [ 6.067778] usb usb1: SerialNumber: xhci-hcd.0.auto [ 6.073376] hub 1-0:1.0: USB hub found [ 6.077201] hub 1-0:1.0: 1 port detected [ 6.081479] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.087006] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 6.094707] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 6.101280] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.109432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 6.117714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.124968] usb usb2: Product: xHCI Host Controller [ 6.129868] usb usb2: Manufacturer: Linux 5.4.74-ACU-10.0.75.1 xhci-hcd [ 6.136509] usb usb2: SerialNumber: xhci-hcd.0.auto [ 6.141755] hub 2-0:1.0: USB hub found [ 6.145553] hub 2-0:1.0: 1 port detected [ 6.149931] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 6.155461] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 6.163264] xhci-hcd xhci-hcd.1.auto: hcc params 0x200073c9 hci version 0x100 quirks 0x0000000000010010 [ 6.172700] xhci-hcd xhci-hcd.1.auto: irq 479, io mem 0x06410000 [ 6.178851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 6.187171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.194424] usb usb3: Product: xHCI Host Controller [ 6.199325] usb usb3: Manufacturer: Linux 5.4.74-ACU-10.0.75.1 xhci-hcd [ 6.205967] usb usb3: SerialNumber: xhci-hcd.1.auto [ 6.211236] hub 3-0:1.0: USB hub found [ 6.215036] hub 3-0:1.0: 1 port detected [ 6.219304] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 6.224830] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 6.232523] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 6.239092] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 6.247242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 6.255571] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.262822] usb usb4: Product: xHCI Host Controller [ 6.267723] usb usb4: Manufacturer: Linux 5.4.74-ACU-10.0.75.1 xhci-hcd [ 6.274364] usb usb4: SerialNumber: xhci-hcd.1.auto [ 6.279655] hub 4-0:1.0: USB hub found [ 6.283593] hub 4-0:1.0: 1 port detected [ 7.279648] random: crng init done [ 7.283041] random: 7 urandom warning(s) missed due to ratelimiting [ 7.292762] systemd[1]: Started OpenSSH server daemon. [ OK ] Started OpenSSH server daemon. [ 7.298757] systemd[347]: sshd.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 7.316004] systemd[1]: Reached target Multi-User System. [ 7.316515] ===whpdebug=== drivers/rpmsg-kdrv/rpmsg_kdrv.c:rpmsg_kdrv_cb rpmsg name: rpmsg-kdrv desc: [ 7.330822] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: register_ipv4 rpmsg - fail -5 [ OK ] Reached target Multi-User System. [ 7.341208] ===whpdebug=== drivers/rpmsg-kdrv/rpmsg_kdrv.c:rpmsg_kdrv_cb rpmsg name: rpmsg-kdrv desc: [ 7.354543] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac started [ 7.362640] systemd[1]: Startup finished in 2.882s (kernel) + 4.408s (userspace) = 7.290s. [ 7.374179] systemd[343]: serial-getty@ttyS2.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory [ 7.391664] 8021q: 802.1Q VLAN Support v1.8 [ 7.451860] pci_ep_driver pci_epf.0: probe pci_ep_driver.0 successful, let's go... Welcome to Buildroot sixi_master login: root Password: root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ps -aux | grep [ 25.456671] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 25.464228] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 25.471537] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 vx [ 25.786937] systemd[1]: Starting Online ext4 Metadata Check for All Filesystems... root 308 0.0 0.0 79872 1536 ? Sl 00:00 0:[ 25.795786] systemd[421]: e2scrub_all.service: Failed to connect stdout to the journal socket, ignoring: No such file or directory 00 /lib/test/vx_app_linux_arm_remote_log.out root 420 [ 25.816186] systemd[1]: e2scrub_all.service: Succeeded. 0.0 0.0 3264 704 ttyS2 S+ 00:00 0:00 grep vx [ 25.823208] systemd[1]: Finished Online ext4 Metadata Check for All Filesystems. root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ps -aux | grep vx root 308 0.0 0.0 79872 1536 ? Sl 00:00 0:00 /lib/test/vx_app_linux_arm_remote_log.out root 423 0.0 0.0 3264 640 ttyS2 S+ 00:00 0:00 grep vx root@sixi_master:~# root@sixi_master:~# kill -9 308 root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# [ 49.869318] ==whpdebug== 49797666465 virt_cpsw_nuss_ndo_xmit xmit protocol:8 len:142 OK [ 49.877338] ==whpdebug== 49797666465 virt_cpsw_nuss_tx_compl_packets tx protocol:8 len:142 budget=64 root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ifconfig eth0 down [ 69.174892] ===whpdebug=== drivers/rpmsg-kdrv/rpmsg_kdrv.c:rpmsg_kdrv_cb rpmsg name: rpmsg-kdrv desc: [ 69.292636] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac stopped root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ifconfig eth0 up [ 90.425767] ===whpdebug=== drivers/rpmsg-kdrv/rpmsg_kdrv.c:rpmsg_kdrv_cb rpmsg name: rpmsg-kdrv desc: [ 90.435183] j721e-cpsw-virt-mac main_r5fss_cpsw9g_virt_mac0: virt_cpsw_nuss mac started root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ifconfig eth0: flags=4163 mtu 1500 inet 10.2.0.4 netmask 255.0.0.0 broadcast 10.255.255.255 ether 02:47:57:4d:00:93 txqueuelen 1000 (Ethernet) RX packets 2318 bytes 722030 (705.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1033 bytes 269861 (263.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0.20: flags=4163 mtu 1500 inet 192.168.1.12 netmask 255.255.255.0 broadcast 192.168.1.255 ether 02:47:57:4d:00:93 txqueuelen 1000 (Ethernet) RX packets 2270 bytes 673778 (657.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 983 bytes 254623 (248.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 1000 (Local Loopback) RX packets 4475 bytes 2216880 (2.1 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4475 bytes 2216880 (2.1 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# ping 10.2.0.200 PING 10.2.0.200 (10.2.0.200): 56 data bytes [ 120.893464] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 120.904830] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 120.904843] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 [ 121.895641] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 121.903195] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 121.903202] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 [ 122.919641] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 122.927195] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 122.927201] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 [ 124.912243] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 124.919800] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 124.927103] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 [ 125.927641] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 125.935193] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 125.942500] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 [ 126.951640] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 begin [ 126.959192] ==whpdebug== 0 virt_cpsw_nuss_ndo_xmit xmit protocol:1544 len:42 OK [ 126.966496] ==whpdebug== 0 virt_cpsw_nuss_tx_compl_packets tx protocol:1544 len:42 budget=64 --- 10.2.0.200 ping statistics --- 8 packets transmitted, 0 packets received, 100% packet loss root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# root@sixi_master:~# vx_app_linux_arm_remote_log.out [MCU2_0] MAC address.ALE entry:12, Policer Entry:2 [MCU2_0] 94.851230 s: ==hProxyServer->addStaticCfg== [MCU2_0] 94.851354 s: ---success to add broadcast all ports, state: 0 [MCU2_0] --- [MCU2_0] 94.851390 s: [network config] ====get network config info from sharemem=== [MCU2_0] 94.851421 s: [network config] SUCCESS: already get network config,count:3 [MCU2_0] 94.851452 s: =====add multicast===== [MCU2_0] 94.851469 s: [mac]:01:00:5e:40:ff:fb [MCU2_0] 94.851587 s: ---success to add multicast all ports, state: 0--- [MCU2_0] 94.851620 s: ======add vlanid===== [MCU2_0] 94.852192 s: --success add vlan, port mask:40 vid: 20-- [MCU2_0] 94.852229 s: add_vlanid() add vlanid end [MCU2_0] 106.872762 s: EnetPhy_isPhyLinked: enetphy.c 1804 PHY 1: set mtu status: 0 [MCU2_0] 106.883907 s: Cpsw_handleLinkDown: Port 5: Link down [MCU2_0] 107.174665 s: Bcm89811Phy_config: ### set slave PHY 1 netinfo:0x0000 [MCU2_0] 110.272843 s: EnetPhy_linkWaitState: PHY 1: ENET_PHY_FSM_STATE_LINKED negotiated mode: 100 Mbps full-duplex [MCU2_0] 110.272930 s: CpswMacPort_enablePort: portNum 4, speed 1 [MCU2_0] 110.272965 s: CpswMacPort_enablePort: line 1379 portNum 4, speed 1 [MCU2_0] 110.273008 s: Cpsw_handleLinkUp: Port 5: Link up: 100-Mbps Full-Duplex [MCU2_0] 110.372765 s: EnetPhy_isPhyLinked: enetphy.c 1773 PHY 1: set mtu status: 0 val=0x5ee [MCU2_0] 110.372824 s: EnetPhy_isPhyLinked: enetphy.c 1776 PHY 1: set mtu status: 0 [MCU2_1] 6.559442 s: CIO: Init ... Done !!! [MCU2_1] 6.559517 s: ### CPU Frequency , [MCU2_1] 6.559558 s: APP: Init ... !!! [MCU2_1] 6.559579 s: board_id = 4300, vehicle_id = 4310 [MCU2_1] 6.559603 s: SCICLIENT: Init ... !!! [MCU2_1] 6.560154 s: SCICLIENT: DMSC FW version [20.8.7--v2020.08d (Terrific Lla] [MCU2_1] 6.560192 s: SCICLIENT: DMSC FW revision 0x14 [MCU2_1] 6.560216 s: SCICLIENT: DMSC FW ABI revision 3.1 [MCU2_1] 6.560242 s: SCICLIENT: Init ... Done !!! [MCU2_1] 6.560263 s: UDMA: Init ... !!! [MCU2_1] 6.563127 s: UDMA: Init ... Done !!! [MCU2_1] 6.563181 s: MEM: Init ... !!! [MCU2_1] 6.563216 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d2c00000 of size 16777216 bytes !!! [MCU2_1] 6.563272 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 3620000 of size 131072 bytes !!! [MCU2_1] 6.563318 s: MEM: Created heap (DDR_NON_CACHE_ME, id=5, flags=0x00000000) @ 94010000 of size 134152192 bytes !!! [MCU2_1] 6.563363 s: MEM: Init ... Done !!! [MCU2_1] 6.563384 s: IPC: Init ... !!! [MCU2_1] 6.563414 s: IPC: 7 CPUs participating in IPC !!! [MCU2_1] 6.563450 s: IPC: Waiting for HLOS to be ready ... !!! [MCU2_1] 6.691668 s: IPC: HLOS is ready !!! [MCU2_1] 6.699325 s: IPC: Init ... Done !!! [MCU2_1] 6.699419 s: REMOTE_SERVICE: Init ... !!! [MCU2_1] 6.700509 s: REMOTE_SERVICE: Init ... Done !!! [MCU2_1] 6.700580 s: FVID2: Init ... !!! [MCU2_1] 6.700641 s: FVID2: Init ... Done !!! [MCU2_1] 6.700667 s: VHWA: DMPAC: Init ... !!! [MCU2_1] 6.700689 s: SCICLIENT: Sciclient_pmSetModuleState module=48 state=2 [MCU2_1] 6.700906 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_1] 6.700934 s: SCICLIENT: Sciclient_pmSetModuleState module=305 state=2 [MCU2_1] 6.701156 s: SCICLIENT: Sciclient_pmSetModuleState success [MCU2_1] 6.701182 s: VHWA: DOF Init ... !!! [MCU2_1] 6.710977 s: VHWA: DOF Init ... Done !!! [MCU2_1] 6.711025 s: VHWA: SDE Init ... !!! [MCU2_1] 6.715105 s: VHWA: SDE Init ... Done !!! [MCU2_1] 6.715154 s: VHWA: DMPAC: Init ... Done !!! [MCU2_1] 6.715180 s: VHWA: Codec: Init ... !!! [MCU2_1] 6.715201 s: VHWA: VDEC Init ... !!! [MCU2_1] 6.728813 s: VHWA: VDEC Init ... Done !!! [MCU2_1] 6.728868 s: VHWA: VENC Init ... !!! [MCU2_1] 6.729082 s: MM_ENC_Init: No OCM RAM pool available, fallback to DDR mode for above mp params [MCU2_1] 6.773314 s: VHWA: VENC Init ... Done !!! [MCU2_1] 6.774015 s: VHWA: Init ... Done !!! [MCU2_1] 6.774293 s: VX_ZONE_INIT:Enabled [MCU2_1] 6.774396 s: VX_ZONE_ERROR:Enabled [MCU2_1] 6.774448 s: VX_ZONE_WARNING:Enabled [MCU2_1] 6.779248 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target DMPAC_SDE [MCU2_1] 6.781938 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target DMPAC_DOF [MCU2_1] 6.782174 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target VDEC1 [MCU2_1] 6.782387 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target VDEC2 [MCU2_1] 6.782642 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target VENC1 [MCU2_1] 6.782868 s: VX_ZONE_INIT:[tivxPlatformCreateTargetId:55] Added target VENC2 [MCU2_1] 6.782917 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [MCU2_1] 6.782948 s: APP: OpenVX Target kernel init ... !!! [MCU2_1] 6.784595 s: APP: OpenVX Target kernel init ... Done !!! [MCU2_1] 6.784642 s: UDMA Copy: Init ... !!! [MCU2_1] 6.787636 s: UDMA Copy: Init ... Done !!! [MCU2_1] 6.787689 s: APP: Init ... Done !!! [MCU2_1] 6.787714 s: APP: Run ... !!! [MCU2_1] 6.787731 s: IPC: Starting echo test ... [MCU2_1] 6.790098 s: APP: Run ... Done !!! [MCU2_1] 6.790835 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_1[x] C66X_1[P] C66X_2[x] C7X_1[x] [MCU2_1] 6.812022 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_1[x] C66X_1[P] C66X_2[x] C7X_1[P] [MCU2_1] 6.831888 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[s] mcu3_1[x] C66X_1[P] C66X_2[P] C7X_1[P] [MCU2_1] 9.313257 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[s] mcu3_1[x] C66X_1[P] C66X_2[P] C7X_1[P] [C6x_1 ] 6.549502 s: CIO: Init ... Done !!! [C6x_1 ] 6.549547 s: ### CPU Frequency , [C6x_1 ] 6.549561 s: APP: Init ... !!! [C6x_1 ] 6.549568 s: board_id = 4300, vehicle_id = 4310 [C6x_1 ] 6.549578 s: SCICLIENT: Init ... !!! [C6x_1 ] 6.550187 s: SCICLIENT: DMSC FW version [20.8.7--v2020.08d (Terrific Lla] [C6x_1 ] 6.550200 s: SCICLIENT: DMSC FW revision 0x14 [C6x_1 ] 6.550209 s: SCICLIENT: DMSC FW ABI revision 3.1 [C6x_1 ] 6.550219 s: SCICLIENT: Init ... Done !!! [C6x_1 ] 6.550227 s: UDMA: Init ... !!! [C6x_1 ] 6.552748 s: UDMA: Init ... Done !!! [C6x_1 ] 6.552771 s: MEM: Init ... !!! [C6x_1 ] 6.552784 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d4000000 of size 16777216 bytes !!! [C6x_1 ] 6.552801 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 800000 of size 229376 bytes !!! [C6x_1 ] 6.552816 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ d5000000 of size 25165824 bytes !!! [C6x_1 ] 6.552832 s: MEM: Init ... Done !!! [C6x_1 ] 6.552839 s: IPC: Init ... !!! [C6x_1 ] 6.552852 s: IPC: 7 CPUs participating in IPC !!! [C6x_1 ] 6.552867 s: IPC: Waiting for HLOS to be ready ... !!! [C6x_1 ] 6.620315 s: IPC: HLOS is ready !!! [C6x_1 ] 6.625522 s: IPC: Init ... Done !!! [C6x_1 ] 6.625554 s: REMOTE_SERVICE: Init ... !!! [C6x_1 ] 6.625951 s: REMOTE_SERVICE: Init ... Done !!! [C6x_1 ] 6.625983 s: VX_ZONE_INIT:Enabled [C6x_1 ] 6.625993 s: VX_ZONE_ERROR:Enabled [C6x_1 ] 6.626003 s: VX_ZONE_WARNING:Enabled [C6x_1 ] 6.626611 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C6x_1 ] 6.626630 s: APP: OpenVX Target kernel init ... !!! [C6x_1 ] 6.626919 s: reg c66x custom .... [C6x_1 ] 6.626967 s: tivxAddTargetKernelOvxControler : target_name DSP-1 , self_cpu 0 [C6x_1 ] 6.627047 s: APP: OpenVX Target kernel init ... Done !!! [C6x_1 ] 6.627060 s: UDMA Copy: Init ... !!! [C6x_1 ] 6.629207 s: UDMA Copy: Init ... Done !!! [C6x_1 ] 6.629225 s: APP: Init ... Done !!! [C6x_1 ] 6.630053 s: APP: Run ... !!! [C6x_1 ] 6.630066 s: IPC: Starting echo test ... [C6x_1 ] 6.631329 s: APP: Run ... Done !!! [C6x_1 ] 6.790814 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[s] C66X_2[x] C7X_1[x] [C6x_1 ] 6.811862 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[s] C66X_2[x] C7X_1[P] [C6x_1 ] 6.831841 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[s] C66X_2[P] C7X_1[P] [C6x_1 ] 9.313155 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_1[x] C66X_1[s] C66X_2[P] C7X_1[P] [C6x_2 ] 6.784845 s: CIO: Init ... Done !!! [C6x_2 ] 6.784879 s: ### CPU Frequency , [C6x_2 ] 6.784893 s: APP: Init ... !!! [C6x_2 ] 6.784900 s: board_id = 4300, vehicle_id = 4310 [C6x_2 ] 6.784910 s: SCICLIENT: Init ... !!! [C6x_2 ] 6.785724 s: SCICLIENT: DMSC FW version [20.8.7--v2020.08d (Terrific Lla] [C6x_2 ] 6.785737 s: SCICLIENT: DMSC FW revision 0x14 [C6x_2 ] 6.785746 s: SCICLIENT: DMSC FW ABI revision 3.1 [C6x_2 ] 6.785755 s: SCICLIENT: Init ... Done !!! [C6x_2 ] 6.785764 s: UDMA: Init ... !!! [C6x_2 ] 6.790146 s: UDMA: Init ... Done !!! [C6x_2 ] 6.790169 s: MEM: Init ... !!! [C6x_2 ] 6.790181 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ d8000000 of size 16777216 bytes !!! [C6x_2 ] 6.790199 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 800000 of size 229376 bytes !!! [C6x_2 ] 6.790214 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ d9000000 of size 25165824 bytes !!! [C6x_2 ] 6.790230 s: MEM: Init ... Done !!! [C6x_2 ] 6.790238 s: IPC: Init ... !!! [C6x_2 ] 6.790251 s: IPC: 7 CPUs participating in IPC !!! [C6x_2 ] 6.790265 s: IPC: Waiting for HLOS to be ready ... !!! [C6x_2 ] 6.820305 s: IPC: HLOS is ready !!! [C6x_2 ] 6.825556 s: IPC: Init ... Done !!! [C6x_2 ] 6.825587 s: REMOTE_SERVICE: Init ... !!! [C6x_2 ] 6.825985 s: REMOTE_SERVICE: Init ... Done !!! [C6x_2 ] 6.826017 s: VX_ZONE_INIT:Enabled [C6x_2 ] 6.826027 s: VX_ZONE_ERROR:Enabled [C6x_2 ] 6.826036 s: VX_ZONE_WARNING:Enabled [C6x_2 ] 6.826637 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C6x_2 ] 6.826656 s: APP: OpenVX Target kernel init ... !!! [C6x_2 ] 6.826951 s: reg c66x custom .... [C6x_2 ] 6.826999 s: tivxAddTargetKernelOvxControler : target_name DSP-2 , self_cpu 1 [C6x_2 ] 6.827072 s: APP: OpenVX Target kernel init ... Done !!! [C6x_2 ] 6.827084 s: UDMA Copy: Init ... !!! [C6x_2 ] 6.829246 s: UDMA Copy: Init ... Done !!! [C6x_2 ] 6.829265 s: APP: Init ... Done !!! [C6x_2 ] 6.830152 s: APP: Run ... !!! [C6x_2 ] 6.830163 s: IPC: Starting echo test ... [C6x_2 ] 6.831445 s: APP: Run ... Done !!! [C6x_2 ] 6.831841 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[.] mcu3_1[x] C66X_1[P] C66X_2[s] C7X_1[.] [C6x_2 ] 6.831902 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[.] mcu3_1[x] C66X_1[P] C66X_2[s] C7X_1[P] [C6x_2 ] 6.831935 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[P] C66X_2[s] C7X_1[P] [C6x_2 ] 9.313174 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_1[x] C66X_1[P] C66X_2[s] C7X_1[P] [C7x_1 ] 6.770600 s: CIO: Init ... Done !!! [C7x_1 ] 6.770638 s: ### CPU Frequency , [C7x_1 ] 6.770667 s: APP: Init ... !!! [C7x_1 ] 6.770676 s: board_id = 4300, vehicle_id = 4310 [C7x_1 ] 6.770698 s: SCICLIENT: Init ... !!! [C7x_1 ] 6.774388 s: SCICLIENT: DMSC FW version [20.8.7--v2020.08d (Terrific Lla] [C7x_1 ] 6.774418 s: SCICLIENT: DMSC FW revision 0x14 [C7x_1 ] 6.774438 s: SCICLIENT: DMSC FW ABI revision 3.1 [C7x_1 ] 6.774463 s: SCICLIENT: Init ... Done !!! [C7x_1 ] 6.774475 s: UDMA: Init ... !!! [C7x_1 ] 6.784260 s: UDMA: Init ... Done !!! [C7x_1 ] 6.784269 s: MEM: Init ... !!! [C7x_1 ] 6.784279 s: MEM: Created heap (DDR_SHARED_MEM, id=0, flags=0x00000004) @ dc000000 of size 134217728 bytes !!! [C7x_1 ] 6.784300 s: MEM: Created heap (L3_MEM, id=1, flags=0x00000001) @ 70020000 of size 2916352 bytes !!! [C7x_1 ] 6.784318 s: MEM: Created heap (L2_MEM, id=2, flags=0x00000001) @ 64800000 of size 491520 bytes !!! [C7x_1 ] 6.784338 s: MEM: Created heap (L1_MEM, id=3, flags=0x00000001) @ 64e00000 of size 16384 bytes !!! [C7x_1 ] 6.784365 s: MEM: Created heap (DDR_SCRATCH_MEM, id=4, flags=0x00000001) @ f0000000 of size 41943040 bytes !!! [C7x_1 ] 6.784390 s: MEM: Init ... Done !!! [C7x_1 ] 6.784400 s: IPC: Init ... !!! [C7x_1 ] 6.784411 s: IPC: 7 CPUs participating in IPC !!! [C7x_1 ] 6.784434 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_1 ] 6.807116 s: IPC: HLOS is ready !!! [C7x_1 ] 6.810627 s: IPC: Init ... Done !!! [C7x_1 ] 6.810636 s: REMOTE_SERVICE: Init ... !!! [C7x_1 ] 6.810810 s: REMOTE_SERVICE: Init ... Done !!! [C7x_1 ] 6.810824 s: VX_ZONE_INIT:Enabled [C7x_1 ] 6.810833 s: VX_ZONE_ERROR:Enabled [C7x_1 ] 6.810842 s: VX_ZONE_WARNING:Enabled [C7x_1 ] 6.811019 s: VX_ZONE_INIT:[tivxInit:71] Initialization Done !!! [C7x_1 ] 6.811030 s: APP: OpenVX Target kernel init ... !!! [C7x_1 ] 6.811065 s: tivxAddTargetKernelOvxControler : target_name DSP_C7-1 , self_cpu 2 [C7x_1 ] 6.811146 s: APP: OpenVX Target kernel init ... Done !!! [C7x_1 ] 6.811156 s: APP: Init ... Done !!! [C7x_1 ] 6.811164 s: APP: Run ... !!! [C7x_1 ] 6.811171 s: IPC: Starting echo test ... [C7x_1 ] 6.811686 s: APP: Run ... Done !!! [C7x_1 ] 6.811943 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[.] mcu3_1[x] C66X_1[P] C66X_2[x] C7X_1[s] [C7x_1 ] 6.811982 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[P] C66X_2[x] C7X_1[s] [C7x_1 ] 6.831820 s: IPC: Echo status: mpu1_0[x] mcu2_0[x] mcu2_1[P] mcu3_1[x] C66X_1[P] C66X_2[P] C7X_1[s] [C7x_1 ] 9.313190 s: IPC: Echo status: mpu1_0[x] mcu2_0[P] mcu2_1[P] mcu3_1[x] C66X_1[P] C66X_2[P] C7X_1[s]