root@am57xx-phycore-kit:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.79-g8177f87071 (oe-user@oe-host) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #1 SMP PREEMPT Thu Oct 12 11:01:32 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: PHYTEC phyCORE-AM5716 with 1GiB DDR3 (1 bank), Commercial Temp [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000095800000, size 32 MiB [ 0.000000] OF: reserved mem: initialized node ipu1-memory@95800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000097800000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node dsp1-memory@97800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000009b800000, size 56 MiB [ 0.000000] OF: reserved mem: initialized node ipu2-memory@9b800000, compatible id shared-dma-pool [ 0.000000] cma: Reserved 24 MiB at 0x00000000fd400000 [ 0.000000] OMAP4: Map 0x00000000fed00000 to (ptrval) for dram barrier [ 0.000000] On node 0 totalpages: 470272 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 147456 pages, LIFO batch:31 [ 0.000000] HighMem zone: 322816 pages, LIFO batch:63 [ 0.000000] DRA752 ES2.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xb4/0x470 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s32396 r8192 d20852 u61440 [ 0.000000] pcpu-alloc: s32396 r8192 d20852 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 468544 [ 0.000000] Kernel command line: console=ttyS2,115200n8 root=PARTUUID=309a0f12-203e-6841-aae5-a16dcdca3da6 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1665656K/1881088K available (10240K kernel code, 327K rwdata, 2760K rodata, 2048K init, 269K bss, 35208K reserved, 180224K cma-reserved, 1266688K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (12256 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 328 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 270 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] OMAP clockevent source: timer1 at 32786 Hz [ 0.000000] arch_timer: cp15 timer(s) running at 6.14MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns [ 0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns [ 0.000019] Switching to timer-based delay loop, resolution 162ns [ 0.000314] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns [ 0.000324] OMAP clocksource: 32k_counter at 32768 Hz [ 0.000852] Console: colour dummy device 80x30 [ 0.000895] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475) [ 0.000913] pid_max: default: 32768 minimum: 301 [ 0.001033] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001048] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001607] CPU: Testing write buffer coherency: ok [ 0.001646] CPU0: Spectre v2: using ICIALLU workaround [ 0.001857] /cpus/cpu@0 missing clock-frequency property [ 0.001871] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.059894] Setting up static identity map for 0x80200000 - 0x80200060 [ 0.079905] rcu: Hierarchical SRCU implementation. [ 0.100091] EFI services will not be available. [ 0.119963] smp: Bringing up secondary CPUs ... [ 0.119975] smp: Brought up 1 node, 1 CPU [ 0.119985] SMP: Total of 1 processors activated (12.29 BogoMIPS). [ 0.119994] CPU: All CPU(s) started in HYP mode. [ 0.120002] CPU: Virtualization extensions available. [ 0.120508] devtmpfs: initialized [ 0.150105] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.150388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.150405] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.153304] pinctrl core: initialized pinctrl subsystem [ 0.153824] DMI not present or invalid. [ 0.154089] NET: Registered protocol family 16 [ 0.160958] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.162033] omap_hwmod: l3_main_2 using broken dt data from ocp [ 0.269008] omap_hwmod: mmu0_dsp2: no dt node [ 0.269020] ------------[ cut here ]------------ [ 0.269042] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2409 _init.constprop.22+0x1b0/0x4dc [ 0.269052] omap_hwmod: mmu0_dsp2: doesn't have mpu register target base [ 0.269060] Modules linked in: [ 0.269078] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.79-g8177f87071 #1 [ 0.269087] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.269096] Backtrace: [ 0.269117] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.269130] r7:c0dc5674 r6:60000013 r5:00000000 r4:c124e51c [ 0.269147] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.269162] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 0.269174] r7:c0dc5674 r6:00000009 r5:00000000 r4:ee895ddc [ 0.269187] [] (__warn) from [] (warn_slowpath_fmt+0x50/0x6c) [ 0.269200] r9:c104a824 r8:00000000 r7:c121053c r6:00000000 r5:c0dc5c50 r4:c1204c48 [ 0.269214] [] (warn_slowpath_fmt) from [] (_init.constprop.22+0x1b0/0x4dc) [ 0.269224] r3:c0dc79b0 r2:c0dc5c50 [ 0.269232] r5:00000000 r4:c1210504 [ 0.269247] [] (_init.constprop.22) from [] (__omap_hwmod_setup_all+0x48/0x134) [ 0.269259] r10:c105e9e8 r9:c104a824 r8:00000000 r7:c100d2f0 r6:ffffe000 r5:c120a2e8 [ 0.269267] r4:c1210504 [ 0.269282] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x84/0x1b0) [ 0.269292] r5:c1204c48 r4:c1251c40 [ 0.269307] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 0.269318] r8:c104a844 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000003 [ 0.269332] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 0.269344] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 0.269352] r4:00000000 [ 0.269363] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.269373] Exception stack(0xee895fb0 to 0xee895ff8) [ 0.269383] 5fa0: 00000000 00000000 00000000 00000000 [ 0.269394] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.269403] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.269412] r5:c0a0f7f8 r4:00000000 [ 0.269424] ---[ end trace b2d359b76d9c4bde ]--- [ 0.270536] omap_hwmod: mmu1_dsp2: no dt node [ 0.270545] ------------[ cut here ]------------ [ 0.270561] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2409 _init.constprop.22+0x1b0/0x4dc [ 0.270570] omap_hwmod: mmu1_dsp2: doesn't have mpu register target base [ 0.270577] Modules linked in: [ 0.270593] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.79-g8177f87071 #1 [ 0.270601] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.270609] Backtrace: [ 0.270626] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.270637] r7:c0dc5674 r6:60000013 r5:00000000 r4:c124e51c [ 0.270650] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.270663] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 0.270673] r7:c0dc5674 r6:00000009 r5:00000000 r4:ee895ddc [ 0.270685] [] (__warn) from [] (warn_slowpath_fmt+0x50/0x6c) [ 0.270697] r9:c104a824 r8:00000000 r7:c12104cc r6:00000000 r5:c0dc5c50 r4:c1204c48 [ 0.270710] [] (warn_slowpath_fmt) from [] (_init.constprop.22+0x1b0/0x4dc) [ 0.270719] r3:c0dc7994 r2:c0dc5c50 [ 0.270728] r5:00000000 r4:c1210494 [ 0.270743] [] (_init.constprop.22) from [] (__omap_hwmod_setup_all+0x48/0x134) [ 0.270754] r10:c105e9e8 r9:c104a824 r8:00000000 r7:c100d2f0 r6:ffffe000 r5:c120a2e8 [ 0.270761] r4:c1210494 [ 0.270775] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x84/0x1b0) [ 0.270783] r5:c1204c48 r4:c1251c40 [ 0.270798] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 0.270808] r8:c104a844 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000003 [ 0.270822] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 0.270833] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 0.270840] r4:00000000 [ 0.270852] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.270861] Exception stack(0xee895fb0 to 0xee895ff8) [ 0.270870] 5fa0: 00000000 00000000 00000000 00000000 [ 0.270880] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.270890] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.270899] r5:c0a0f7f8 r4:00000000 [ 0.270907] ---[ end trace b2d359b76d9c4bdf ]--- [ 0.271983] omap_hwmod: usb_otg_ss4: no dt node [ 0.271991] ------------[ cut here ]------------ [ 0.272005] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2409 _init.constprop.22+0x1b0/0x4dc [ 0.272014] omap_hwmod: usb_otg_ss4: doesn't have mpu register target base [ 0.272021] Modules linked in: [ 0.272036] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.79-g8177f87071 #1 [ 0.272044] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.272051] Backtrace: [ 0.272068] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.272079] r7:c0dc5674 r6:60000013 r5:00000000 r4:c124e51c [ 0.272093] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.272105] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 0.272115] r7:c0dc5674 r6:00000009 r5:00000000 r4:ee895ddc [ 0.272127] [] (__warn) from [] (warn_slowpath_fmt+0x50/0x6c) [ 0.272138] r9:c104a824 r8:00000000 r7:c120ed04 r6:00000000 r5:c0dc5c50 r4:c1204c48 [ 0.272152] [] (warn_slowpath_fmt) from [] (_init.constprop.22+0x1b0/0x4dc) [ 0.272160] r3:c0dc7564 r2:c0dc5c50 [ 0.272168] r5:00000000 r4:c120eccc [ 0.272183] [] (_init.constprop.22) from [] (__omap_hwmod_setup_all+0x48/0x134) [ 0.272194] r10:c105e9e8 r9:c104a824 r8:00000000 r7:c100d2f0 r6:ffffe000 r5:c120a2e8 [ 0.272202] r4:c120eccc [ 0.272216] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x84/0x1b0) [ 0.272224] r5:c1204c48 r4:c1251c40 [ 0.272238] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 0.272249] r8:c104a844 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000003 [ 0.272263] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 0.272274] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 0.272282] r4:00000000 [ 0.272293] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.272302] Exception stack(0xee895fb0 to 0xee895ff8) [ 0.272311] 5fa0: 00000000 00000000 00000000 00000000 [ 0.272322] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.272332] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.272340] r5:c0a0f7f8 r4:00000000 [ 0.272348] ---[ end trace b2d359b76d9c4be0 ]--- [ 0.273435] omap_hwmod: vip2: no dt node [ 0.273443] ------------[ cut here ]------------ [ 0.273457] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2409 _init.constprop.22+0x1b0/0x4dc [ 0.273465] omap_hwmod: vip2: doesn't have mpu register target base [ 0.273472] Modules linked in: [ 0.273487] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.79-g8177f87071 #1 [ 0.273495] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.273502] Backtrace: [ 0.273519] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.273529] r7:c0dc5674 r6:60000013 r5:00000000 r4:c124e51c [ 0.273542] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.273555] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 0.273565] r7:c0dc5674 r6:00000009 r5:00000000 r4:ee895ddc [ 0.273577] [] (__warn) from [] (warn_slowpath_fmt+0x50/0x6c) [ 0.273588] r9:c104a824 r8:00000000 r7:c1212d1c r6:00000000 r5:c0dc5c50 r4:c1204c48 [ 0.273601] [] (warn_slowpath_fmt) from [] (_init.constprop.22+0x1b0/0x4dc) [ 0.273610] r3:c0dc7fe0 r2:c0dc5c50 [ 0.273618] r5:00000000 r4:c1212ce4 [ 0.273632] [] (_init.constprop.22) from [] (__omap_hwmod_setup_all+0x48/0x134) [ 0.273643] r10:c105e9e8 r9:c104a824 r8:00000000 r7:c100d2f0 r6:ffffe000 r5:c120a2e8 [ 0.273651] r4:c1212ce4 [ 0.273665] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x84/0x1b0) [ 0.273674] r5:c1204c48 r4:c1251c40 [ 0.273688] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 0.273698] r8:c104a844 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000003 [ 0.273712] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 0.273723] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 0.273730] r4:00000000 [ 0.273741] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.273750] Exception stack(0xee895fb0 to 0xee895ff8) [ 0.273760] 5fa0: 00000000 00000000 00000000 00000000 [ 0.273770] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.273780] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.273788] r5:c0a0f7f8 r4:00000000 [ 0.273797] ---[ end trace b2d359b76d9c4be1 ]--- [ 0.274875] omap_hwmod: vip3: no dt node [ 0.274884] ------------[ cut here ]------------ [ 0.274897] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2409 _init.constprop.22+0x1b0/0x4dc [ 0.274905] omap_hwmod: vip3: doesn't have mpu register target base [ 0.274912] Modules linked in: [ 0.274927] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.79-g8177f87071 #1 [ 0.274935] Hardware name: Generic DRA72X (Flattened Device Tree) [ 0.274942] Backtrace: [ 0.274959] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 0.274969] r7:c0dc5674 r6:60000013 r5:00000000 r4:c124e51c [ 0.274983] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 0.274995] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 0.275006] r7:c0dc5674 r6:00000009 r5:00000000 r4:ee895ddc [ 0.275017] [] (__warn) from [] (warn_slowpath_fmt+0x50/0x6c) [ 0.275028] r9:c104a824 r8:00000000 r7:c1212cac r6:00000000 r5:c0dc5c50 r4:c1204c48 [ 0.275042] [] (warn_slowpath_fmt) from [] (_init.constprop.22+0x1b0/0x4dc) [ 0.275050] r3:c0dc7fd8 r2:c0dc5c50 [ 0.275059] r5:00000000 r4:c1212c74 [ 0.275073] [] (_init.constprop.22) from [] (__omap_hwmod_setup_all+0x48/0x134) [ 0.275084] r10:c105e9e8 r9:c104a824 r8:00000000 r7:c100d2f0 r6:ffffe000 r5:c120a2e8 [ 0.275092] r4:c1212c74 [ 0.275105] [] (__omap_hwmod_setup_all) from [] (do_one_initcall+0x84/0x1b0) [ 0.275114] r5:c1204c48 r4:c1251c40 [ 0.275128] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 0.275139] r8:c104a844 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000003 [ 0.275151] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 0.275162] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 0.275170] r4:00000000 [ 0.275181] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 0.275190] Exception stack(0xee895fb0 to 0xee895ff8) [ 0.275200] 5fa0: 00000000 00000000 00000000 00000000 [ 0.275210] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.275220] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 0.275229] r5:c0a0f7f8 r4:00000000 [ 0.275237] ---[ end trace b2d359b76d9c4be2 ]--- [ 0.377828] cpuidle: using governor ladder [ 0.377865] cpuidle: using governor menu [ 0.388611] gpio gpiochip0: (gpio-0-31): added GPIO chardev (254:0) [ 0.388689] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio-0-31) [ 0.388732] OMAP GPIO hardware version 0.1 [ 0.389357] gpio gpiochip1: (gpio-32-63): added GPIO chardev (254:1) [ 0.389429] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio-32-63) [ 0.390073] gpio gpiochip2: (gpio-64-95): added GPIO chardev (254:2) [ 0.390144] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio-64-95) [ 0.390788] gpio gpiochip3: (gpio-96-127): added GPIO chardev (254:3) [ 0.390854] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio-96-127) [ 0.391486] gpio gpiochip4: (gpio-128-159): added GPIO chardev (254:4) [ 0.391556] gpiochip_setup_dev: registered GPIOs 128 to 159 on device: gpiochip4 (gpio-128-159) [ 0.392195] gpio gpiochip5: (gpio-160-191): added GPIO chardev (254:5) [ 0.392270] gpiochip_setup_dev: registered GPIOs 160 to 191 on device: gpiochip5 (gpio-160-191) [ 0.392910] gpio gpiochip6: (gpio-192-223): added GPIO chardev (254:6) [ 0.392985] gpiochip_setup_dev: registered GPIOs 192 to 223 on device: gpiochip6 (gpio-192-223) [ 0.393633] gpio gpiochip7: (gpio-224-255): added GPIO chardev (254:7) [ 0.393699] gpiochip_setup_dev: registered GPIOs 224 to 255 on device: gpiochip7 (gpio-224-255) [ 0.414073] No ATAGs? [ 0.414116] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.414131] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.415001] OMAP DMA hardware revision 0.0 [ 0.452572] edma 43300000.edma: memcpy is disabled [ 0.455969] edma 43300000.edma: TI EDMA DMA engine driver [ 0.463223] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported) [ 0.463781] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vdd_3v3[0]' [ 0.464036] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-aic_dvdd[0]' [ 0.464296] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-vtt[0]' - status (0) [ 0.464587] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vcc_3v3[0]' [ 0.464840] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/fixedregulator-vcc_5v0[0]' [ 0.467553] omap-iommu 40d01000.mmu: 40d01000.mmu registered [ 0.467741] omap-iommu 40d02000.mmu: 40d02000.mmu registered [ 0.467991] omap-iommu 58882000.mmu: 58882000.mmu registered [ 0.468236] omap-iommu 55082000.mmu: 55082000.mmu registered [ 0.468599] iommu: Adding device 58820000.ipu to group 1 [ 0.468689] iommu: Adding device 55020000.ipu to group 2 [ 0.468832] iommu: Adding device 40800000.dsp to group 0 [ 0.470473] media: Linux media interface: v0.10 [ 0.470514] videodev: Linux video capture interface: v2.00 [ 0.470588] pps_core: LinuxPPS API ver. 1 registered [ 0.470598] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.470618] PTP clock support registered [ 0.470650] EDAC MC: Ver: 3.0.0 [ 0.480808] omap-mailbox: probe of 4883c000.mailbox failed with error -22 [ 0.480875] omap-mailbox: probe of 4883e000.mailbox failed with error -22 [ 0.481099] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400 [ 0.481288] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400 [ 0.481636] Advanced Linux Sound Architecture Driver Initialized. [ 0.482478] clocksource: Switched to clocksource arch_sys_counter [ 0.491118] NET: Registered protocol family 2 [ 0.491692] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.491721] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.491785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.491912] TCP: Hash tables configured (established 8192 bind 8192) [ 0.491981] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.492016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.492142] NET: Registered protocol family 1 [ 0.522654] RPC: Registered named UNIX socket transport module. [ 0.522666] RPC: Registered udp transport module. [ 0.522675] RPC: Registered tcp transport module. [ 0.522683] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.522695] PCI: CLS 0 bytes, default 64 [ 0.523803] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.524746] Initialise system trusted keyrings [ 0.524895] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.529994] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.540501] NFS: Registering the id_resolver key type [ 0.540522] Key type id_resolver registered [ 0.540532] Key type id_legacy registered [ 0.540571] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.540801] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc. [ 0.543128] NET: Registered protocol family 38 [ 0.543142] Key type asymmetric registered [ 0.543152] Asymmetric key parser 'x509' registered [ 0.543203] bounce: pool size: 64 pages [ 0.543236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.543247] io scheduler noop registered [ 0.543257] io scheduler deadline registered [ 0.543360] io scheduler cfq registered (default) [ 0.543371] io scheduler mq-deadline registered [ 0.543381] io scheduler kyber registered [ 0.548712] pinctrl-single 4a003400.pinmux: 282 pins, size 1128 [ 0.548873] pinctrl-single 4a002e8c.pinmux: please update dts to use #pinctrl-cells = <1> [ 0.548925] pinctrl-single 4a002e8c.pinmux: initialized with no interrupts [ 0.548938] pinctrl-single 4a002e8c.pinmux: 1 pins, size 4 [ 0.562373] dra7-pcie 51800000.pcie_ep: probe deferral not supported [ 0.612687] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 0.616410] console [ttyS2] disabled [ 0.616466] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 44, base_baud = 3000000) is a 8250 [ 2.584437] console [ttyS2] enabled [ 2.588984] 48066000.serial: ttyS4 at MMIO 0x48066000 (irq = 45, base_baud = 3000000) is a 8250 [ 2.598769] 4ae2b000.serial: ttyS9 at MMIO 0x4ae2b000 (irq = 46, base_baud = 3000000) is a 8250 [ 2.622531] brd: module loaded [ 2.631786] loop: module loaded [ 2.638554] spidev spi1.0: buggy DT: spidev listed directly in DT [ 2.644759] ------------[ cut here ]------------ [ 2.649411] WARNING: CPU: 0 PID: 1 at drivers/spi/spidev.c:730 spidev_probe+0x1c8/0x1dc [ 2.657467] Modules linked in: [ 2.660543] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.19.79-g8177f87071 #1 [ 2.669020] Hardware name: Generic DRA72X (Flattened Device Tree) [ 2.675140] Backtrace: [ 2.677610] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 2.685218] r7:c0e2ac9c r6:60000013 r5:00000000 r4:c124e51c [ 2.690907] [] (show_stack) from [] (dump_stack+0x90/0xa4) [ 2.698167] [] (dump_stack) from [] (__warn+0xdc/0xf8) [ 2.705073] r7:c0e2ac9c r6:00000009 r5:00000000 r4:00000000 [ 2.710761] [] (__warn) from [] (warn_slowpath_null+0x48/0x50) [ 2.718367] r9:c123a8a8 r8:00000000 r7:00000000 r6:c0745a78 r5:000002da r4:c0e2ac9c [ 2.726147] [] (warn_slowpath_null) from [] (spidev_probe+0x1c8/0x1dc) [ 2.734447] r6:c123a898 r5:edc12000 r4:edc12000 [ 2.739089] [] (spidev_probe) from [] (spi_drv_probe+0x84/0xa8) [ 2.746781] r9:c123a8a8 r8:00000000 r7:00000000 r6:c123a898 r5:00000000 r4:edc12000 [ 2.754562] [] (spi_drv_probe) from [] (really_probe+0x204/0x2c0) [ 2.762427] r7:00000000 r6:c128b5b8 r5:edc12000 r4:c128b5b4 [ 2.768113] [] (really_probe) from [] (driver_probe_device+0x68/0x180) [ 2.776417] r10:00000000 r9:c128b590 r8:00000001 r7:c06d6d20 r6:edc12000 r5:c123a8a8 [ 2.784280] r4:edc12000 r3:00000000 [ 2.787875] [] (driver_probe_device) from [] (__device_attach_driver+0xa4/0xc8) [ 2.796961] r9:c128b590 r8:00000001 r7:c06d6d20 r6:edc12000 r5:ee895bb4 r4:c123a8a8 [ 2.804745] [] (__device_attach_driver) from [] (bus_for_each_drv+0x88/0xcc) [ 2.813570] r7:c06d6d20 r6:ee895bb4 r5:c1204c48 r4:00000000 [ 2.819257] [] (bus_for_each_drv) from [] (__device_attach+0xd8/0x140) [ 2.827560] r7:ee377c00 r6:edc12034 r5:c1204c48 r4:edc12000 [ 2.833248] [] (__device_attach) from [] (device_initial_probe+0x14/0x18) [ 2.841812] r8:edc12000 r7:ee377c00 r6:c123a2e8 r5:edc12000 r4:edc12008 [ 2.848548] [] (device_initial_probe) from [] (bus_probe_device+0x8c/0x94) [ 2.857203] [] (bus_probe_device) from [] (device_add+0x37c/0x620) [ 2.865154] r7:ee377c00 r6:00000000 r5:c1204c48 r4:edc12008 [ 2.870840] [] (device_add) from [] (spi_add_device+0xa0/0x134) [ 2.878531] r10:c0e2ad9c r9:00000000 r8:ee377c00 r7:eea82a10 r6:00000000 r5:ee377c00 [ 2.886393] r4:edc12000 [ 2.888941] [] (spi_add_device) from [] (of_register_spi_device+0x25c/0x394) [ 2.897764] r7:00000001 r6:c1204c48 r5:eedb1670 r4:edc12000 [ 2.903451] [] (of_register_spi_device) from [] (spi_register_controller+0x338/0x65c) [ 2.913062] r9:c0e2a830 r8:c1204c48 r7:eedb16c0 r6:eedb1670 r5:00000000 r4:ee377c00 [ 2.920843] [] (spi_register_controller) from [] (devm_spi_register_controller+0x40/0x78) [ 2.930804] r10:c0e2ad9c r9:00000000 r8:00000000 r7:eea82a10 r6:ee377c00 r5:ee377c00 [ 2.938666] r4:ee32f740 [ 2.941215] [] (devm_spi_register_controller) from [] (omap2_mcspi_probe+0x4b4/0x560) [ 2.950824] r7:00000000 r6:ee377c00 r5:ee377f40 r4:ee377c00 [ 2.956513] [] (omap2_mcspi_probe) from [] (platform_drv_probe+0x50/0xa0) [ 2.965076] r10:00000000 r9:c123a900 r8:00000000 r7:00000000 r6:c123a900 r5:00000000 [ 2.972938] r4:eea82a10 [ 2.975486] [] (platform_drv_probe) from [] (really_probe+0x204/0x2c0) [ 2.983789] r7:00000000 r6:c128b5b8 r5:eea82a10 r4:c128b5b4 [ 2.989474] [] (really_probe) from [] (driver_probe_device+0x68/0x180) [ 2.997775] r10:c105efe0 r9:c104a834 r8:00000000 r7:c06d6c28 r6:eea82a44 r5:c123a900 [ 3.005637] r4:eea82a10 r3:00000000 [ 3.009229] [] (driver_probe_device) from [] (__driver_attach+0xf4/0xf8) [ 3.017705] r9:c104a834 r8:00000000 r7:c06d6c28 r6:eea82a44 r5:c123a900 r4:eea82a10 [ 3.025484] [] (__driver_attach) from [] (bus_for_each_dev+0x7c/0xbc) [ 3.033700] r7:c06d6c28 r6:c123a900 r5:c1204c48 r4:eea77e34 [ 3.039387] [] (bus_for_each_dev) from [] (driver_attach+0x24/0x28) [ 3.047426] r7:00000000 r6:ee32f080 r5:c1236500 r4:c123a900 [ 3.053116] [] (driver_attach) from [] (bus_add_driver+0x1c4/0x208) [ 3.061159] [] (bus_add_driver) from [] (driver_register+0x7c/0x110) [ 3.069285] r7:c102bff0 r6:ffffe000 r5:c1204c48 r4:c123a900 [ 3.074972] [] (driver_register) from [] (__platform_driver_register+0x48/0x50) [ 3.084057] r5:c1204c48 r4:c1251c40 [ 3.087656] [] (__platform_driver_register) from [] (omap2_mcspi_driver_init+0x1c/0x20) [ 3.097446] [] (omap2_mcspi_driver_init) from [] (do_one_initcall+0x84/0x1b0) [ 3.106365] [] (do_one_initcall) from [] (kernel_init_freeable+0x1c4/0x258) [ 3.115104] r8:c104a854 r7:c10004f0 r6:c1251c40 r5:c1251c40 r4:00000007 [ 3.121841] [] (kernel_init_freeable) from [] (kernel_init+0x10/0x11c) [ 3.130144] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0a0f7f8 [ 3.138006] r4:00000000 [ 3.140553] [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) [ 3.148157] Exception stack(0xee895fb0 to 0xee895ff8) [ 3.153233] 5fa0: 00000000 00000000 00000000 00000000 [ 3.161447] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.169660] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.176302] r5:c0a0f7f8 r4:00000000 [ 3.179954] ---[ end trace b2d359b76d9c4be3 ]--- [ 3.185555] mdio_bus fixed-0: GPIO lookup for consumer reset [ 3.185564] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 3.185571] mdio_bus fixed-0: No GPIO consumer reset found [ 3.185596] libphy: Fixed MDIO Bus: probed [ 3.193659] mdio_bus 48485000.mdio: GPIO lookup for consumer reset [ 3.193666] mdio_bus 48485000.mdio: using device tree for GPIO lookup [ 3.193685] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000[0]' [ 3.193700] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/ocp/ethernet@48484000/mdio@48485000[0]' [ 3.193709] mdio_bus 48485000.mdio: using lookup tables for GPIO lookup [ 3.193717] mdio_bus 48485000.mdio: No GPIO consumer reset found [ 3.252510] davinci_mdio 48485000.mdio: davinci mdio revision 1.6, bus freq 1000000 [ 3.260206] libphy: 48485000.mdio: probed [ 3.276547] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000/ethernet-phy@1[0]' [ 3.278831] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/ethernet@48484000/mdio@48485000/ethernet-phy@2[0]' [ 3.279008] davinci_mdio 48485000.mdio: phy[1]: device 48485000.mdio:01, driver Micrel KSZ9031 Gigabit PHY [ 3.288761] davinci_mdio 48485000.mdio: phy[2]: device 48485000.mdio:02, driver Micrel KSZ9031 Gigabit PHY [ 3.299048] cpsw 48484000.ethernet: Detected MACID = 88:3f:4a:53:27:28 [ 3.305709] cpsw 48484000.ethernet: initialized cpsw ale version 1.4 [ 3.312093] cpsw 48484000.ethernet: ALE Table size 1024 [ 3.317433] cpsw 48484000.ethernet: cpts: overflow check period 500 (jiffies) [ 3.325498] cpsw 48484000.ethernet: cpsw: Detected MACID = 88:3f:4a:53:27:29 [ 3.333862] i2c /dev entries driver [ 3.338933] gpio-fan gpio_fan: GPIO lookup for consumer alarm [ 3.338940] gpio-fan gpio_fan: using device tree for GPIO lookup [ 3.338963] of_get_named_gpiod_flags: can't parse 'alarm-gpios' property of node '/gpio_fan[0]' [ 3.338978] of_get_named_gpiod_flags: can't parse 'alarm-gpio' property of node '/gpio_fan[0]' [ 3.338987] gpio-fan gpio_fan: using lookup tables for GPIO lookup [ 3.338995] gpio-fan gpio_fan: No GPIO consumer alarm found [ 3.339009] gpio-fan gpio_fan: GPIO lookup for consumer (null) [ 3.339015] gpio-fan gpio_fan: using device tree for GPIO lookup [ 3.339042] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio_fan[0]' - status (0) [ 3.339081] gpio gpiochip6: Persistence not supported for GPIO 5 [ 3.339086] no flags found for (null) [ 3.339267] gpio-fan gpio_fan: GPIO fan initialized [ 3.346711] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 3.356254] cpu cpu0: dev_pm_opp_set_regulators: no regulator (vdd) found: -19 [ 3.364081] sdhci: Secure Digital Host Controller Interface driver [ 3.370289] sdhci: Copyright(c) Pierre Ossman [ 3.375626] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.382281] sdhci-omap 4809c000.mmc: GPIO lookup for consumer cd [ 3.382289] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup [ 3.382316] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.382351] gpio gpiochip5: Persistence not supported for GPIO 27 [ 3.382364] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 3.391414] sdhci-omap 4809c000.mmc: Got CD GPIO [ 3.396077] sdhci-omap 4809c000.mmc: GPIO lookup for consumer wp [ 3.396084] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup [ 3.396111] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.396124] gpio gpiochip5: Persistence not supported for GPIO 28 [ 3.396133] sdhci-omap 4809c000.mmc: Got WP GPIO [ 3.400923] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.6 [ 3.407709] sdhci-omap 4809c000.mmc: 4809c000.mmc supply vqmmc not found, using dummy regulator [ 3.416522] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.0 [ 3.423331] sdhci-omap 4809c000.mmc: Dropping the link to regulator.0 [ 3.429910] sdhci-omap 4809c000.mmc: Dropping the link to regulator.6 [ 3.436842] sdhci-omap 480b4000.mmc: GPIO lookup for consumer wp [ 3.436850] sdhci-omap 480b4000.mmc: using device tree for GPIO lookup [ 3.436866] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 3.436881] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 3.436890] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup [ 3.436898] sdhci-omap 480b4000.mmc: No GPIO consumer wp found [ 3.437018] sdhci-omap 480b4000.mmc: failed to set system capabilities [ 3.444105] ti-iodelay 4844a000.padconf: Set reg 0x678 Delay(a: 406 g: 0), Elements(C=0 F=11)0x2900b [ 3.453351] ti-iodelay 4844a000.padconf: Set reg 0x680 Delay(a: 659 g: 0), Elements(C=1 F=4)0x29024 [ 3.462445] ti-iodelay 4844a000.padconf: Set reg 0x684 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.471402] ti-iodelay 4844a000.padconf: Set reg 0x688 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.480334] ti-iodelay 4844a000.padconf: Set reg 0x68c Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.489267] ti-iodelay 4844a000.padconf: Set reg 0x690 Delay(a: 130 g: 0), Elements(C=0 F=3)0x29003 [ 3.498374] ti-iodelay 4844a000.padconf: Set reg 0x694 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.507305] ti-iodelay 4844a000.padconf: Set reg 0x698 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.516235] ti-iodelay 4844a000.padconf: Set reg 0x69c Delay(a: 169 g: 0), Elements(C=0 F=4)0x29004 [ 3.525342] ti-iodelay 4844a000.padconf: Set reg 0x6a0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.534271] ti-iodelay 4844a000.padconf: Set reg 0x6a4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.543203] ti-iodelay 4844a000.padconf: Set reg 0x6a8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.552119] ti-iodelay 4844a000.padconf: Set reg 0x6ac Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.561049] ti-iodelay 4844a000.padconf: Set reg 0x6b0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.569979] ti-iodelay 4844a000.padconf: Set reg 0x6b4 Delay(a: 457 g: 0), Elements(C=0 F=12)0x2900c [ 3.579168] ti-iodelay 4844a000.padconf: Set reg 0x6b8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.588098] ti-iodelay 4844a000.padconf: Set reg 0x6bc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 3.597121] sdhci-omap 480ad000.mmc: GPIO lookup for consumer cd [ 3.597128] sdhci-omap 480ad000.mmc: using device tree for GPIO lookup [ 3.597145] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 3.597160] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 3.597168] sdhci-omap 480ad000.mmc: using lookup tables for GPIO lookup [ 3.597176] sdhci-omap 480ad000.mmc: No GPIO consumer cd found [ 3.597185] sdhci-omap 480ad000.mmc: GPIO lookup for consumer wp [ 3.597191] sdhci-omap 480ad000.mmc: using device tree for GPIO lookup [ 3.597206] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 3.597219] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 3.597227] sdhci-omap 480ad000.mmc: using lookup tables for GPIO lookup [ 3.597234] sdhci-omap 480ad000.mmc: No GPIO consumer wp found [ 3.597350] sdhci-omap 480ad000.mmc: 480ad000.mmc supply vqmmc not found, using dummy regulator [ 3.606161] sdhci-omap 480ad000.mmc: Linked as a consumer to regulator.0 [ 3.612958] sdhci-omap 480ad000.mmc: Dropping the link to regulator.0 [ 3.619984] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@0[0]' - status (0) [ 3.619999] gpio gpiochip3: Persistence not supported for GPIO 9 [ 3.620004] no flags found for gpios [ 3.620111] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@1[0]' - status (0) [ 3.620125] gpio gpiochip3: Persistence not supported for GPIO 10 [ 3.620130] no flags found for gpios [ 3.620223] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@2[0]' - status (0) [ 3.620261] gpio gpiochip0: Persistence not supported for GPIO 28 [ 3.620267] no flags found for gpios [ 3.620359] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/led@3[0]' - status (0) [ 3.620373] gpio gpiochip0: Persistence not supported for GPIO 29 [ 3.620378] no flags found for gpios [ 3.620885] ledtrig-cpu: registered to indicate activity on CPUs [ 3.632232] NET: Registered protocol family 10 [ 3.647754] Segment Routing with IPv6 [ 3.651491] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.658007] NET: Registered protocol family 17 [ 3.662719] Key type dns_resolver registered [ 3.667130] Registering SWP/SWPB emulation handler [ 3.671947] omap_voltage_late_init: Voltage driver support not added [ 3.678349] Power Management for TI OMAP4+ devices. [ 3.683968] Loading compiled-in X.509 certificates [ 3.716346] dmm 4e000000.dmm: workaround for errata i878 in use [ 3.724024] dmm 4e000000.dmm: initialized all PAT entries [ 3.730011] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-wlan[0]' - status (0) [ 3.730423] of_get_named_gpiod_flags: parsed 'gpio' property of node '/fixedregulator-bt[0]' - status (0) [ 3.731745] palmas 0-0058: Irq flag is 0x00000008 [ 3.765795] palmas 0-0058: Muxing GPIO 2b, PWM 0, LED 0 [ 3.772780] SMPS12: supplied by regulator-dummy [ 3.779189] SMPS3: supplied by vcc_3v3 [ 3.784809] SMPS45: supplied by regulator-dummy [ 3.791359] SMPS6: supplied by vcc_3v3 [ 3.795526] smps6: Bringing 1050000uV into 1030000-1030000uV [ 3.803200] SMPS7: supplied by regulator-dummy [ 3.809009] random: fast init done [ 3.812629] SMPS8: supplied by vcc_3v3 [ 3.817793] SMPS9: supplied by regulator-dummy [ 3.823011] LDO1: supplied by vcc_5v0 [ 3.828699] LDO2: supplied by vcc_5v0 [ 3.834212] LDO3: supplied by vcc_3v3 [ 3.839734] LDO4: supplied by vcc_3v3 [ 3.845227] LDO5: supplied by regulator-dummy [ 3.850341] LDO6: supplied by regulator-dummy [ 3.856499] LDO7: supplied by regulator-dummy [ 3.861653] LDO8: supplied by regulator-dummy [ 3.866798] LDO9: supplied by vcc_3v3 [ 3.872523] LDOLN: supplied by vcc_3v3 [ 3.878145] LDOUSB: supplied by vcc_5v0 [ 3.886529] at24 0-0050: GPIO lookup for consumer wp [ 3.886536] at24 0-0050: using device tree for GPIO lookup [ 3.886565] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/i2c@48070000/eeprom@50[0]' - status (0) [ 3.886615] gpio gpiochip4: Persistence not supported for GPIO 13 [ 3.886914] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write [ 3.893822] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.900201] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 3.906720] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz [ 3.912860] sdhci-omap 4809c000.mmc: GPIO lookup for consumer cd [ 3.912867] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup [ 3.912898] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.912944] gpio gpiochip5: Persistence not supported for GPIO 27 [ 3.912956] omap_gpio 4805d000.gpio: Could not set line 27 debounce to 200000 microseconds (-22) [ 3.921783] sdhci-omap 4809c000.mmc: Got CD GPIO [ 3.926446] sdhci-omap 4809c000.mmc: GPIO lookup for consumer wp [ 3.926453] sdhci-omap 4809c000.mmc: using device tree for GPIO lookup [ 3.926477] of_get_named_gpiod_flags: parsed 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 3.926490] gpio gpiochip5: Persistence not supported for GPIO 28 [ 3.926499] sdhci-omap 4809c000.mmc: Got WP GPIO [ 3.931281] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.6 [ 3.938096] sdhci-omap 4809c000.mmc: 4809c000.mmc supply vqmmc not found, using dummy regulator [ 3.946905] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.0 [ 3.953714] sdhci-omap 4809c000.mmc: Dropping the link to regulator.0 [ 3.960443] sdhci-omap 4809c000.mmc: Linked as a consumer to regulator.20 [ 3.967420] sdhci-omap 4809c000.mmc: no pinctrl state for ddr_3_3v mode [ 4.001247] mmc0: SDHCI controller on 4809c000.mmc [4809c000.mmc] using ADMA [ 4.008942] sdhci-omap 480b4000.mmc: GPIO lookup for consumer wp [ 4.008949] sdhci-omap 480b4000.mmc: using device tree for GPIO lookup [ 4.008966] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.008980] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.008990] sdhci-omap 480b4000.mmc: using lookup tables for GPIO lookup [ 4.008998] sdhci-omap 480b4000.mmc: No GPIO consumer wp found [ 4.009167] vdd_3v3: supplied by regen1 [ 4.013326] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.1 [ 4.020140] sdhci-omap 480b4000.mmc: Dropping the link to regulator.1 [ 4.026724] sdhci-omap 480b4000.mmc: Linked as a consumer to regulator.1 [ 4.059217] mmc1: SDHCI controller on 480b4000.mmc [480b4000.mmc] using ADMA [ 4.067023] ti-iodelay 4844a000.padconf: Set reg 0x678 Delay(a: 406 g: 0), Elements(C=0 F=11)0x2900b [ 4.076225] ti-iodelay 4844a000.padconf: Set reg 0x680 Delay(a: 659 g: 0), Elements(C=1 F=4)0x29024 [ 4.085335] ti-iodelay 4844a000.padconf: Set reg 0x684 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.094269] ti-iodelay 4844a000.padconf: Set reg 0x688 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.103201] ti-iodelay 4844a000.padconf: Set reg 0x68c Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.112118] ti-iodelay 4844a000.padconf: Set reg 0x690 Delay(a: 130 g: 0), Elements(C=0 F=3)0x29003 [ 4.121224] ti-iodelay 4844a000.padconf: Set reg 0x694 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.130155] ti-iodelay 4844a000.padconf: Set reg 0x698 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.139085] ti-iodelay 4844a000.padconf: Set reg 0x69c Delay(a: 169 g: 0), Elements(C=0 F=4)0x29004 [ 4.148191] ti-iodelay 4844a000.padconf: Set reg 0x6a0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.157122] ti-iodelay 4844a000.padconf: Set reg 0x6a4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.166053] ti-iodelay 4844a000.padconf: Set reg 0x6a8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.174983] ti-iodelay 4844a000.padconf: Set reg 0x6ac Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.183913] ti-iodelay 4844a000.padconf: Set reg 0x6b0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.192845] ti-iodelay 4844a000.padconf: Set reg 0x6b4 Delay(a: 457 g: 0), Elements(C=0 F=12)0x2900c [ 4.202023] ti-iodelay 4844a000.padconf: Set reg 0x6b8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.210954] ti-iodelay 4844a000.padconf: Set reg 0x6bc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.219974] sdhci-omap 480ad000.mmc: GPIO lookup for consumer cd [ 4.219982] sdhci-omap 480ad000.mmc: using device tree for GPIO lookup [ 4.219999] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.220013] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.220022] sdhci-omap 480ad000.mmc: using lookup tables for GPIO lookup [ 4.220030] sdhci-omap 480ad000.mmc: No GPIO consumer cd found [ 4.220039] sdhci-omap 480ad000.mmc: GPIO lookup for consumer wp [ 4.220045] sdhci-omap 480ad000.mmc: using device tree for GPIO lookup [ 4.220059] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.220073] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.220081] sdhci-omap 480ad000.mmc: using lookup tables for GPIO lookup [ 4.220088] sdhci-omap 480ad000.mmc: No GPIO consumer wp found [ 4.220254] sdhci-omap 480ad000.mmc: 480ad000.mmc supply vqmmc not found, using dummy regulator [ 4.229065] sdhci-omap 480ad000.mmc: Linked as a consumer to regulator.0 [ 4.235867] sdhci-omap 480ad000.mmc: Dropping the link to regulator.0 [ 4.242417] sdhci-omap 480ad000.mmc: Linked as a consumer to regulator.11 [ 4.249323] sdhci-omap 480ad000.mmc: no pinctrl state for sdr104 mode [ 4.255841] sdhci-omap 480ad000.mmc: no pinctrl state for ddr50 mode [ 4.262230] sdhci-omap 480ad000.mmc: no pinctrl state for hs200_1_8v mode [ 4.292505] mmc2: SDHCI controller on 480ad000.mmc [480ad000.mmc] using PIO [ 4.300073] hctosys: unable to open rtc device (rtc0) [ 4.306412] ALSA device list: [ 4.309449] No soundcards found. [ 4.313796] Waiting for root device PARTUUID=309a0f12-203e-6841-aae5-a16dcdca3da6... [ 4.327186] ti-iodelay 4844a000.padconf: Set reg 0x18c Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.336176] ti-iodelay 4844a000.padconf: Set reg 0x1a4 Delay(a: 119 g: 0), Elements(C=0 F=3)0x29003 [ 4.345340] ti-iodelay 4844a000.padconf: Set reg 0x1b0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.354325] ti-iodelay 4844a000.padconf: Set reg 0x1bc Delay(a: 18 g: 0), Elements(C=0 F=0)0x29000 [ 4.363401] ti-iodelay 4844a000.padconf: Set reg 0x1c8 Delay(a: 894 g: 0), Elements(C=1 F=11)0x2902b [ 4.372630] ti-iodelay 4844a000.padconf: Set reg 0x1d4 Delay(a: 30 g: 0), Elements(C=0 F=0)0x29000 [ 4.381662] ti-iodelay 4844a000.padconf: Set reg 0x1e0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.390714] ti-iodelay 4844a000.padconf: Set reg 0x1ec Delay(a: 23 g: 0), Elements(C=0 F=0)0x29000 [ 4.399849] ti-iodelay 4844a000.padconf: Set reg 0x1f8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.408832] ti-iodelay 4844a000.padconf: Set reg 0x360 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.417794] ti-iodelay 4844a000.padconf: Set reg 0x194 Delay(a: 152 g: 0), Elements(C=0 F=4)0x29004 [ 4.426926] ti-iodelay 4844a000.padconf: Set reg 0x1ac Delay(a: 206 g: 0), Elements(C=0 F=5)0x29005 [ 4.436081] ti-iodelay 4844a000.padconf: Set reg 0x1b8 Delay(a: 78 g: 0), Elements(C=0 F=2)0x29002 [ 4.445221] ti-iodelay 4844a000.padconf: Set reg 0x1c4 Delay(a: 2 g: 0), Elements(C=0 F=0)0x29000 [ 4.454269] ti-iodelay 4844a000.padconf: Set reg 0x1d0 Delay(a: 266 g: 0), Elements(C=0 F=7)0x29007 [ 4.463525] ti-iodelay 4844a000.padconf: Set reg 0x1dc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.472580] ti-iodelay 4844a000.padconf: Set reg 0x1e8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.481618] ti-iodelay 4844a000.padconf: Set reg 0x1f4 Delay(a: 43 g: 0), Elements(C=0 F=1)0x29001 [ 4.490756] ti-iodelay 4844a000.padconf: Set reg 0x200 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.499852] ti-iodelay 4844a000.padconf: Set reg 0x368 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.508905] ti-iodelay 4844a000.padconf: Set reg 0x190 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.517961] ti-iodelay 4844a000.padconf: Set reg 0x1a8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.527053] ti-iodelay 4844a000.padconf: Set reg 0x1b4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.536016] ti-iodelay 4844a000.padconf: Set reg 0x1c0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.544950] ti-iodelay 4844a000.padconf: Set reg 0x1d8 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.553967] ti-iodelay 4844a000.padconf: Set reg 0x1e4 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.562948] ti-iodelay 4844a000.padconf: Set reg 0x1f0 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.571866] ti-iodelay 4844a000.padconf: Set reg 0x1fc Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.580821] ti-iodelay 4844a000.padconf: Set reg 0x364 Delay(a: 0 g: 0), Elements(C=0 F=0)0x29000 [ 4.591668] mmc1: new DDR MMC card at address 0001 [ 4.607436] mmcblk1: mmc1:0001 008GB0 7.28 GiB [ 4.612548] mmcblk1boot0: mmc1:0001 008GB0 partition 1 8.00 MiB [ 4.618947] mmcblk1boot1: mmc1:0001 008GB0 partition 2 8.00 MiB [ 4.625462] mmcblk1rpmb: mmc1:0001 008GB0 partition 3 4.00 MiB, chardev (244:0) [ 4.647283] mmcblk1: p1 p2 [ 4.688302] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.696502] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 4.704963] devtmpfs: mounted [ 4.709241] Freeing unused kernel memory: 2048K [ 4.713954] Run /sbin/init as init process [ 4.814528] systemd[1]: System time before build time, advancing clock. [ 4.831461] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 4.853319] systemd[1]: Detected architecture arm. [ 4.893649] systemd[1]: Set hostname to . [ 4.904052] random: systemd: uninitialized urandom read (16 bytes read) [ 4.910719] systemd[1]: Initializing machine ID from random generator. [ 5.073395] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.090638] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.284417] random: systemd: uninitialized urandom read (16 bytes read) [ 5.291348] systemd[1]: Listening on udev Kernel Socket. [ 5.322622] random: systemd: uninitialized urandom read (16 bytes read) [ 5.329599] systemd[1]: Listening on udev Control Socket. [ 5.365660] systemd[1]: Created slice system-getty.slice. [ 5.393727] systemd[1]: Created slice User and Session Slice. [ 5.688781] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 6.904415] systemd-journald[93]: Received request to flush runtime journal from PID 1 [ 10.029851] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ 10.029967] omap-rproc 58820000.ipu: ignoring dependency for device, assuming no driver [ 10.029975] omap-rproc 58820000.ipu: assigned reserved memory node ipu1-memory@95800000 [ 10.030065] remoteproc remoteproc0: 58820000.ipu is available [ 10.030733] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 10.030744] remoteproc remoteproc0: powering up 58820000.ipu [ 10.030773] remoteproc remoteproc0: Direct firmware load for dra7-ipu1-fw.xem4 failed with error -2 [ 10.030782] remoteproc remoteproc0: request_firmware failed: -2 [ 10.043292] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ 10.043392] omap-rproc 55020000.ipu: ignoring dependency for device, assuming no driver [ 10.043400] omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@9b800000 [ 10.043485] remoteproc remoteproc1: 55020000.ipu is available [ 10.043612] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 10.043622] remoteproc remoteproc1: powering up 55020000.ipu [ 10.043651] remoteproc remoteproc1: Direct firmware load for dra7-ipu2-fw.xem4 failed with error -2 [ 10.043660] remoteproc remoteproc1: request_firmware failed: -2 [ 10.062183] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 10.062331] omap-rproc 40800000.dsp: ignoring dependency for device, assuming no driver [ 10.062339] omap-rproc 40800000.dsp: assigned reserved memory node dsp1-memory@97800000 [ 10.062424] remoteproc remoteproc2: 40800000.dsp is available [ 10.062634] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 10.062646] remoteproc remoteproc2: powering up 40800000.dsp [ 10.062677] remoteproc remoteproc2: Direct firmware load for dra7-dsp1-fw.xe66 failed with error -2 [ 10.062686] remoteproc remoteproc2: request_firmware failed: -2 [ 10.986460] Driver for 1-wire Dallas network protocol. [ 10.993624] omap_rng 48090000.rng: Random Number Generator ver. 20 [ 10.994965] random: crng init done [ 10.994971] random: 7 urandom warning(s) missed due to ratelimiting [ 11.065201] omap-des 480a5000.des: OMAP DES hw accel rev: 2.2 [ 11.079346] omap-des 480a5000.des: will run requests pump with realtime priority [ 11.135512] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer id [ 11.135521] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup [ 11.135539] of_get_named_gpiod_flags: can't parse 'id-gpios' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' [ 11.135566] of_get_named_gpiod_flags: parsed 'id-gpio' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' - status (0) [ 11.135616] gpio gpiochip7: Persistence not supported for GPIO 6 [ 11.135627] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer vbus [ 11.135633] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup [ 11.135649] of_get_named_gpiod_flags: can't parse 'vbus-gpios' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' [ 11.135672] of_get_named_gpiod_flags: parsed 'vbus-gpio' property of node '/ocp/i2c@48070000/tps659038@58/tps659038_usb[0]' - status (0) [ 11.135685] gpio gpiochip3: Persistence not supported for GPIO 21 [ 11.135697] omap_gpio 48053000.gpio: Could not set line 6 debounce to 20000 microseconds (-22) [ 11.151071] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/ocp/i2c@4807a000/tlv320aic3007@18[0]' [ 11.151087] of_get_named_gpiod_flags: can't parse 'gpio-reset' property of node '/ocp/i2c@4807a000/tlv320aic3007@18[0]' [ 11.151176] tlv320aic3x-codec 3-0018: Linked as a consumer to regulator.1 [ 11.151194] aic_dvdd_fixed: supplied by vdd_3v3 [ 11.151305] tlv320aic3x-codec 3-0018: Linked as a consumer to regulator.2 [ 11.173914] rtc rtc1: 48070000.i2c:tps659038@58:tps659038_rtc: dev (253:1) [ 11.173926] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659038@58:tps659038_rtc as rtc1 [ 11.246777] omap_hdq 480b2000.1w: OMAP HDQ Hardware Rev 0.:. Driver in Interrupt mode [ 11.311393] CAN device driver interface [ 11.368915] c_can_platform 4ae3c000.can: c_can_platform device registered (regs=6a1390f7, irq=102) [ 11.372155] c_can_platform 48480000.can: c_can_platform device registered (regs=0f576642, irq=103) [ 11.488694] w1_master_driver w1_bus_master1: Attaching one wire slave 01.000000000000 crc 3d [ 11.504094] w1_master_driver w1_bus_master1: Family 1 for 01.000000000000.3d is not registered. [ 11.620473] omap_rtc 48838000.rtc: char device (253:0) [ 11.620487] omap_rtc 48838000.rtc: registered as rtc0 [ 11.846546] net eth1: initializing cpsw version 1.15 (0) [ 11.881158] vpe 489d0000.vpe: loading firmware vpdma-1b8.bin [ 11.902964] vpe 489d0000.vpe: Device registered as /dev/video0 [ 12.039676] Micrel KSZ9031 Gigabit PHY 48485000.mdio:02: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:02, irq=POLL) [ 12.055868] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.131171] net eth0: initializing cpsw version 1.15 (0) [ 12.278327] Micrel KSZ9031 Gigabit PHY 48485000.mdio:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=48485000.mdio:01, irq=POLL) [ 12.280696] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.333521] phy phy-4a084000.phy.3: Linked as a consumer to regulator.30 [ 12.368265] phy phy-4a085000.phy.4: Linked as a consumer to regulator.30 [ 12.571138] SCSI subsystem initialized [ 12.627235] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 12.714746] libata version 3.00 loaded. [ 12.747283] omap-sham 4b101000.sham: hw accel on OMAP rev 4.3 [ 12.748562] ahci 4a140000.sata: controller can't do 64bit DMA, forcing 32bit [ 12.748570] ahci 4a140000.sata: forcing port_map 0x0 -> 0x1 [ 12.748614] ahci 4a140000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 12.748624] ahci 4a140000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 12.766134] omap-aes 4b500000.aes: OMAP AES hw accel rev: 3.3 [ 12.786943] omap-aes 4b500000.aes: will run requests pump with realtime priority [ 12.816501] scsi host0: ahci [ 12.816914] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1410ff] port 0x100 irq 92 [ 12.828079] omap-aes 4b700000.aes: OMAP AES hw accel rev: 3.3 [ 12.829405] omap-aes 4b700000.aes: will run requests pump with realtime priority [ 13.144304] ata1: SATA link down (SStatus 0 SControl 300) [ 13.356979] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 13.356996] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 13.383013] asoc-simple-card sound: tlv320aic3x-hifi <-> 48460000.mcasp mapping ok [ 13.383072] asoc-simple-card sound: ASoC: no DMI vendor name! [ 16.137686] dwc3 48890000.usb: Failed to get clk 'ref': -2 [ 16.213533] dwc3 488d0000.usb: Failed to get clk 'ref': -2 [ 16.285657] OF: graph: no port node found in /ocp/ocp2scp@4a080000/phy@4a085000 [ 16.471786] usbcore: registered new interface driver usbfs [ 16.483745] usbcore: registered new interface driver hub [ 16.492430] usbcore: registered new device driver usb [ 16.525592] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.531134] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 16.557900] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 16.582568] xhci-hcd xhci-hcd.0.auto: irq 184, io mem 0x48890000 [ 16.594803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 16.611232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.632685] usb usb1: Product: xHCI Host Controller [ 16.637646] usb usb1: Manufacturer: Linux 4.19.79-g8177f87071 xhci-hcd [ 16.652555] usb usb1: SerialNumber: xhci-hcd.0.auto [ 16.664497] hub 1-0:1.0: USB hub found [ 16.672554] hub 1-0:1.0: 1 port detected [ 16.685367] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 16.702820] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 16.710526] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 16.732737] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.752716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 16.761025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.782807] usb usb2: Product: xHCI Host Controller [ 16.787710] usb usb2: Manufacturer: Linux 4.19.79-g8177f87071 xhci-hcd [ 16.804350] usb usb2: SerialNumber: xhci-hcd.0.auto [ 16.823952] hub 2-0:1.0: USB hub found [ 16.827757] hub 2-0:1.0: 1 port detected [ 16.837614] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 16.852538] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 16.869028] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 16.892743] xhci-hcd xhci-hcd.1.auto: irq 185, io mem 0x488d0000 [ 16.900607] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 16.922689] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.929950] usb usb3: Product: xHCI Host Controller [ 16.952805] usb usb3: Manufacturer: Linux 4.19.79-g8177f87071 xhci-hcd [ 16.959366] usb usb3: SerialNumber: xhci-hcd.1.auto [ 16.973973] hub 3-0:1.0: USB hub found [ 16.983793] hub 3-0:1.0: 1 port detected [ 16.994972] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 17.000497] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 17.022678] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 17.033758] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 17.052699] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 17.061009] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 17.093059] usb usb4: Product: xHCI Host Controller [ 17.097965] usb usb4: Manufacturer: Linux 4.19.79-g8177f87071 xhci-hcd [ 17.112554] usb usb4: SerialNumber: xhci-hcd.1.auto [ 17.124939] hub 4-0:1.0: USB hub found [ 17.133674] hub 4-0:1.0: 1 port detected [ 34.402523] vtt_fixed: supplied by smps3 [ 34.412899] aic_dvdd_fixed: disabling [ 34.416591] wlan_fixed: disabling root@am57xx-phycore-kit:~# root@am57xx-phycore-kit:~# root@am57xx-phycore-kit:~# dmesg | grep pci [ 0.562373] dra7-pcie 51800000.pcie_ep: probe deferral not supported root@am57xx-phycore-kit:~# root@am57xx-phycore-kit:~# root@am57xx-phycore-kit:~# root@am57xx-phycore-kit:~# logout