U-Boot SPL 2023.04 (Feb 23 2024 - 10:41:11 +0800) (j784s4)The board we use does not have eeprom! SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') SPL initial stack usage: 13424 bytes Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Loading Environment from nowhere... OK Starting ATF on ARM64 core... NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty NOTICE: BL31: Built : 09:34:15, Aug 24 2023 I/TC: I/TC: OP-TEE version: 4.0.0 (gcc version 11.4.0 (GCC)) #1 Fri Oct 20 18:29:31 UTC 2023 aarch64 I/TC: WARNING: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') I/TC: HUK Initialized I/TC: Activated SA2UL device I/TC: Fixing SA2UL firewall owner for GP device I/TC: Enabled firewalls for SA2UL TRNG device I/TC: SA2UL TRNG initialized I/TC: SA2UL Drivers initialized I/TC: Primary CPU switching to normal world boot U-Boot SPL 2023.04 (Feb 23 2024 - 10:41:25 +0800) SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') Trying to boot from MMC2 Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted U-Boot 2023.04 (Feb 23 2024 - 10:41:25 +0800) SoC: J784S4 SR1.0 GP Model: Texas Instruments J784S4 EVM (j784s4)The board we use does not have eeprom! Board: J784S4-EVM rev E1 DRAM: 8 GiB idle-statesCore: 91 devices, 32 uclasses, devicetree: separate Flash: 0 Bytes MMC: mmc@4f80000: 0, mmc@4fb0000: 1 Loading Environment from nowhere... OK In: serial@2880000 Out: serial@2880000 Err: serial@2880000 am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 (j784s4)The board we use does not have eeprom! Net: eth0: ethernet@46000000port@1 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device SD/MMC found on device 1 (fs)Failed to load 'boot.scr' 727 bytes read in 22 ms (32.2 KiB/s) Loaded env from uEnv.txt Importing environment from mmc1 ... Running uenvcmd ... 1 bytes read in 21 ms (0 Bytes/s) Already setup. (omap24xx)i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@20: Error reading output register:-121 (omap24xx)i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register:-121 GPIO: 'gpio@22_17' not found Command 'gpio' failed: Error -22 (omap24xx)i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@20: Error reading output register:-121 (omap24xx)i2c_write: error waiting for data ACK (status=0x116) pca953x gpio@22: Error reading output register:-121 GPIO: 'gpio@22_16' not found Command 'gpio' failed: Error -22 k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work (fs)Failed to load '/lib/firmware/j784s4-mcu-r5f0_1-fw' 1359404 bytes read in 79 ms (16.4 MiB/s) Load Remote Processor 2 with data@addr=0x82000000 1359404 bytes: Success! 322772 bytes read in 35 ms (8.8 MiB/s) Load Remote Processor 3 with data@addr=0x82000000 322772 bytes: Success! 146592 bytes read in 29 ms (4.8 MiB/s) Load Remote Processor 4 with data@addr=0x82000000 146592 bytes: Success! 146592 bytes read in 28 ms (5 MiB/s) Load Remote Processor 5 with data@addr=0x82000000 146592 bytes: Success! 478400 bytes read in 43 ms (10.6 MiB/s) Load Remote Processor 6 with data@addr=0x82000000 478400 bytes: Success! 146592 bytes read in 28 ms (5 MiB/s) Load Remote Processor 7 with data@addr=0x82000000 146592 bytes: Success! 14942592 bytes read in 298 ms (47.8 MiB/s) Load Remote Processor 8 with data@addr=0x82000000 14942592 bytes: Success! 15339848 bytes read in 314 ms (46.6 MiB/s) Load Remote Processor 9 with data@addr=0x82000000 15339848 bytes: Success! 14942480 bytes read in 295 ms (48.3 MiB/s) Load Remote Processor 10 with data@addr=0x82000000 14942480 bytes: Success! 14942480 bytes read in 296 ms (48.1 MiB/s) Load Remote Processor 11 with data@addr=0x82000000 14942480 bytes: Success! 20367872 bytes read in 855 ms (22.7 MiB/s) 114599 bytes read in 28 ms (3.9 MiB/s) Working FDT set to 88000000 3943 bytes read in 23 ms (167 KiB/s) 14272 bytes read in 23 ms (605.5 KiB/s) ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Working FDT set to 88000000 (fdt)ERROR: reserving fdt memory region failed (addr=880000000 size=20000000 flags=4) Loading Device Tree to 000000008fee1000, end 000000008fffffff ... OK Working FDT set to 8fee1000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] [ 0.000000] Linux version 6.1.46 (jinzhu@work) (aarch64-oe-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Feb 23 10:35:54 CST 2024 [ 0.000000] Machine model: Texas Instruments J784S4 EVM [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '') [ 0.000000] printk: bootconsole [ns16550a0] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000098fe00000, size 1792 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a0000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a0100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a1000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a1100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 31 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a4100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a5000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a5100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a6100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a7000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a7100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-dma-memory@a8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-memory@a8100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ac000000, size 48 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-rtos-ipc-memory-region@ac000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000af000000, size 48 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-dma-memory@af000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71-dma-memory@b2000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b2100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_0-memory@b2100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b4000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-dma-memory@b4000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b4100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_1-memory@b4100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_2-dma-memory@b6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b6100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_2-memory@b6100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8000000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_3-dma-memory@b8000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000b8100000, size 5 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-c71_3-memory@b8100000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ba000000, size 192 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-core-heap-memory-lo@ba000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000c6000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-queues@c6000000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000c6800000, size 24 MiB [ 0.000000] OF: reserved mem: initialized node vision-apps-r5f-virtual-eth-buffers@c6800000, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000880000000, size 512 MiB [ 0.000000] OF: reserved mem: initialized node c7x-ddr-heaps-hi@880000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: initialized node vision_apps_shared-memories, compatible id dma-heap-carveout [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000abffffff] [ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000b2603fff] [ 0.000000] node 0: [mem 0x00000000b2604000-0x00000000b3ffffff] [ 0.000000] node 0: [mem 0x00000000b4000000-0x00000000b4603fff] [ 0.000000] node 0: [mem 0x00000000b4604000-0x00000000b5ffffff] [ 0.000000] node 0: [mem 0x00000000b6000000-0x00000000b6603fff] [ 0.000000] node 0: [mem 0x00000000b6604000-0x00000000b7ffffff] [ 0.000000] node 0: [mem 0x00000000b8000000-0x00000000b8603fff] [ 0.000000] node 0: [mem 0x00000000b8604000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x00000000ba000000-0x00000000c7ffffff] [ 0.000000] node 0: [mem 0x00000000c8000000-0x00000000ffffefff] [ 0.000000] node 0: [mem 0x0000000880000000-0x000000089fffffff] [ 0.000000] node 0: [mem 0x00000008a0000000-0x00000009ffffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffefff] [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 19 pages/cpu s38376 r8192 d31256 u77824 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2064382 [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) root=PARTUUID=1df87605-02 rw rootfstype=ext4 rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 8. [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) [ 0.000000] Memory: 4767772K/8388600K available (12352K kernel code, 1266K rwdata, 4028K rodata, 2112K init, 432K bss, 1785820K reserved, 1835008K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: [Firmware Bug]: GICR region 0x0000000001900000 has overlapping address [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 960 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 [ 0.000000] ITS [mem 0x01820000-0x0182ffff] [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @8be800000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000008be050000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008be060000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns [ 0.008424] Console: colour dummy device 80x25 [ 0.012993] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.023664] pid_max: default: 32768 minimum: 301 [ 0.028400] LSM: Security Framework initializing [ 0.033175] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.040931] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.050034] cblist_init_generic: Setting adjustable number of callback queues. [ 0.057430] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.063693] cblist_init_generic: Setting adjustable number of callback queues. [ 0.071078] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.077382] rcu: Hierarchical SRCU implementation. [ 0.082279] rcu: Max phase no-delay instances is 1000. [ 0.087765] Platform MSI: msi-controller@1820000 domain created [ 0.093960] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created [ 0.103396] EFI services will not be available. [ 0.108233] smp: Bringing up secondary CPUs ... I/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot I/TC: Secondary CPU 6 initializing I/TC: Secondary CPU 6 switching to normal world boot I/TC: Secondary CPU 7 initializing I/TC: Secondary CPU 7 switching to normal world boot [ 0.121300] Detected PIPT I-cache on CPU1 [ 0.121355] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 [ 0.121368] GICv3: CPU1: using allocated LPI pending table @0x00000008be070000 [ 0.121399] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] [ 0.129845] Detected PIPT I-cache on CPU2 [ 0.129881] GICv3: CPU2: found redistributor 2 region 0:0x0000000001940000 [ 0.129894] GICv3: CPU2: using allocated LPI pending table @0x00000008be080000 [ 0.129916] CPU2: Booted secondary processor 0x0000000002 [0x411fd080] [ 0.138320] Detected PIPT I-cache on CPU3 [ 0.138364] GICv3: CPU3: found redistributor 3 region 0:0x0000000001960000 [ 0.138377] GICv3: CPU3: using allocated LPI pending table @0x00000008be090000 [ 0.138400] CPU3: Booted secondary processor 0x0000000003 [0x411fd080] [ 0.146854] Detected PIPT I-cache on CPU4 [ 0.146930] GICv3: CPU4: found redistributor 100 region 0:0x0000000001980000 [ 0.146944] GICv3: CPU4: using allocated LPI pending table @0x00000008be0a0000 [ 0.146975] CPU4: Booted secondary processor 0x0000000100 [0x411fd080] [ 0.155440] Detected PIPT I-cache on CPU5 [ 0.155490] GICv3: CPU5: found redistributor 101 region 0:0x00000000019a0000 [ 0.155503] GICv3: CPU5: using allocated LPI pending table @0x00000008be0b0000 [ 0.155527] CPU5: Booted secondary processor 0x0000000101 [0x411fd080] [ 0.163958] Detected PIPT I-cache on CPU6 [ 0.164009] GICv3: CPU6: found redistributor 102 region 0:0x00000000019c0000 [ 0.164021] GICv3: CPU6: using allocated LPI pending table @0x00000008be0c0000 [ 0.164046] CPU6: Booted secondary processor 0x0000000102 [0x411fd080] [ 0.172474] Detected PIPT I-cache on CPU7 [ 0.172526] GICv3: CPU7: found redistributor 103 region 0:0x00000000019e0000 [ 0.172539] GICv3: CPU7: using allocated LPI pending table @0x00000008be0d0000 [ 0.172562] CPU7: Booted secondary processor 0x0000000103 [0x411fd080] [ 0.172607] smp: Brought up 1 node, 8 CPUs [ 0.353596] SMP: Total of 8 processors activated. [ 0.358402] CPU features: detected: 32-bit EL0 Support [ 0.363658] CPU features: detected: CRC32 instructions [ 0.368951] CPU: All CPU(s) started at EL2 [ 0.373140] alternatives: applying system-wide alternatives [ 0.379769] devtmpfs: initialized [ 0.390325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.400305] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.427750] pinctrl core: initialized pinctrl subsystem [ 0.433420] DMI not present or invalid. [ 0.437660] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.444511] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.452003] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.460187] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.468415] audit: initializing netlink subsys (disabled) [ 0.474033] audit: type=2000 audit(0.336:1): state=initialized audit_enabled=0 res=1 [ 0.474228] thermal_sys: Registered thermal governor 'step_wise' [ 0.481953] thermal_sys: Registered thermal governor 'power_allocator' [ 0.488175] cpuidle: using governor menu [ 0.498913] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.505939] ASID allocator initialised with 65536 entries [ 0.520867] platform a000000.dp-bridge: Fixed dependency cycle(s) with /dp0-connector [ 0.529419] KASLR disabled due to lack of seed [ 0.536840] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.543788] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.550194] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.557128] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.563531] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.570466] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.576870] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.583804] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.590889] k3-chipinfo 43000014.chipid: Family:J784S4 rev:SR1.0 JTAGID[0x0bb8002f] Detected [ 0.600334] iommu: Default domain type: Translated [ 0.605349] iommu: DMA domain TLB invalidation policy: strict mode [ 0.611873] SCSI subsystem initialized [ 0.615852] usbcore: registered new interface driver usbfs [ 0.621471] usbcore: registered new interface driver hub [ 0.626911] usbcore: registered new device driver usb [ 0.632252] pps_core: LinuxPPS API ver. 1 registered [ 0.637324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.646662] PTP clock support registered [ 0.650744] EDAC MC: Ver: 3.0.0 [ 0.654416] FPGA manager framework [ 0.657922] Advanced Linux Sound Architecture Driver Initialized. [ 0.664551] clocksource: Switched to clocksource arch_sys_counter [ 0.670892] VFS: Disk quotas dquot_6.6.0 [ 0.674916] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.684904] Carveout Heap: Exported 480 MiB at 0x00000008a0000000 [ 0.691182] NET: Registered PF_INET protocol family [ 0.696366] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.706711] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.715478] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.723402] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.731719] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.740138] TCP: Hash tables configured (established 65536 bind 65536) [ 0.746914] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753951] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.761511] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.767550] RPC: Registered named UNIX socket transport module. [ 0.773606] RPC: Registered udp transport module. [ 0.778409] RPC: Registered tcp transport module. [ 0.783212] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.789794] NET: Registered PF_XDP protocol family [ 0.794697] PCI: CLS 0 bytes, default 64 [ 0.799312] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.808566] Initialise system trusted keyrings [ 0.813208] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.821724] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.827920] NFS: Registering the id_resolver key type [ 0.833100] Key type id_resolver registered [ 0.837372] Key type id_legacy registered [ 0.841490] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.848339] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.875370] Key type asymmetric registered [ 0.879554] Asymmetric key parser 'x509' registered [ 0.884563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.892188] io scheduler mq-deadline registered [ 0.896821] io scheduler kyber registered [ 0.903067] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 [ 0.909016] pinctrl-single 4301c038.pinctrl: 11 pins, size 44 [ 0.915004] pinctrl-single 4301c068.pinctrl: 72 pins, size 288 [ 0.921034] pinctrl-single 4301c190.pinctrl: 1 pins, size 4 [ 0.926849] pinctrl-single 11c000.pinctrl: 72 pins, size 288 [ 0.933062] pinctrl-single a40000.pinctrl: 512 pins, size 2048 [ 0.942430] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.953459] loop: module loaded [ 0.957308] megasas: 07.719.03.00-rc1 [ 0.962560] tun: Universal TUN/TAP device driver, 1.6 [ 0.968084] thunder_xcv, ver 1.0 [ 0.971404] thunder_bgx, ver 1.0 [ 0.974709] nicpf, ver 1.0 [ 0.977563] e1000: Intel(R) PRO/1000 Network Driver [ 0.982545] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.988426] e1000e: Intel(R) PRO/1000 Network Driver [ 0.993495] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.999556] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.005070] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.010770] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.017176] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.023289] sky2: driver version 1.30 [ 1.027443] VFIO - User Level meta-driver version: 0.3 [ 1.033228] usbcore: registered new interface driver usb-storage [ 1.039664] i2c_dev: i2c /dev entries driver [ 1.044588] sdhci: Secure Digital Host Controller Interface driver [ 1.050903] sdhci: Copyright(c) Pierre Ossman [ 1.055468] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.061672] ledtrig-cpu: registered to indicate activity on CPUs [ 1.067903] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.074637] usbcore: registered new interface driver usbhid [ 1.080331] usbhid: USB HID core driver [ 1.084735] optee: probing for conduit method. I/TC: Reserved shared memory is enabled I/TC: Dynamic shared memory is enabled I/TC: Normal World virtualization support is disabled I/TC: Asynchronous notifications are disabled [ 1.089290] optee: revision 4.0 (2a5b1d12) [ 1.105683] optee: dynamic shared memory is enabled [ 1.115069] optee: initialized driver [ 1.119831] Initializing XFRM netlink socket [ 1.124215] NET: Registered PF_PACKET protocol family [ 1.129407] Key type dns_resolver registered [ 1.133955] registered taskstats version 1 [ 1.138156] Loading compiled-in X.509 certificates [ 1.148976] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') [ 1.185115] omap_i2c 42120000.i2c: bus 1 rev0.12 at 400 kHz [ 1.191385] pca953x 0-0020: supply vcc not found, using dummy regulator [ 1.198201] pca953x 0-0020: using no AI [ 1.224597] pca953x 0-0020: failed writing register [ 1.229645] pca953x: probe of 0-0020 failed with error -121 [ 1.235448] pca953x 0-0022: supply vcc not found, using dummy regulator [ 1.242252] pca953x 0-0022: using AI [ 1.245954] pca953x 0-0022: failed writing register [ 1.250980] pca953x: probe of 0-0022 failed with error -121 [ 1.256705] omap_i2c 2000000.i2c: bus 0 rev0.12 at 400 kHz [ 1.262480] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 177 domain created [ 1.271015] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 10 domain created [ 1.280259] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 283 domain created [ 1.288915] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 321 created [ 1.300847] ti-udma 311a0000.dma-controller: Number of rings: 48 [ 1.307604] ti-udma 311a0000.dma-controller: Channels: 24 (bchan: 0, tchan: 8, rchan: 16) [ 1.316776] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:328 [ 1.326649] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled [ 1.333410] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 [ 1.342284] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:315 [ 1.352432] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled [ 1.359191] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 [ 1.367041] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 214, base_baud = 6000000) is a 8250 [ 1.376436] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 215, base_baud = 3000000) is a 8250 [ 1.385289] printk: console [ttyS2] enabled [ 1.385289] printk: console [ttyS2] enabled [ 1.393729] printk: bootconsole [ns16550a0] disabled [ 1.393729] printk: bootconsole [ns16550a0] disabled [ 1.444552] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.452996] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver RTL9000AA_RTL9000AN Ethernet [ 1.462823] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 1.475667] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 1.482873] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 1.489005] pps pps0: new PPS source ptp0 [ 1.493147] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1 [ 1.540555] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 1.548328] mdio_bus c200f00.mdio: MDIO device at address 0 is missing. [ 1.554946] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 1.567683] am65-cpsw-nuss c200000.ethernet: Use random MAC address [ 1.573937] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4 [ 1.581056] am65-cpsw-nuss c200000.ethernet: ALE Table size 64 [ 1.587170] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:250000000, add_val:3 pps:0 [ 1.597219] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a010c, freq:250000000, add_val:3 pps:0 [ 1.606070] mmc0: CQHCI version 5.10 [ 1.606288] mmc1: CQHCI version 5.10 [ 1.647122] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit [ 1.654003] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit [ 1.697098] mmc1: new high speed SDHC card at address aaaa [ 1.702961] mmcblk1: mmc1:aaaa SD32G 29.7 GiB [ 1.709038] mmcblk1: p1 p2 [ 1.756462] mmc0: Command Queue Engine enabled [ 1.760910] mmc0: new HS200 MMC card at address 0001 [ 1.766204] mmcblk0: mmc0:0001 DA6032 29.1 GiB [ 1.771871] mmcblk0boot0: mmc0:0001 DA6032 4.00 MiB [ 1.777470] mmcblk0boot1: mmc0:0001 DA6032 4.00 MiB [ 1.782961] mmcblk0rpmb: mmc0:0001 DA6032 4.00 MiB, chardev (240:0) [ 1.900213] tps6594-rtc tps6594-rtc.4.auto: registered as rtc0 [ 1.906172] tps6594-rtc tps6594-rtc.4.auto: hctosys: unable to read the hardware clock [ 1.914431] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fca100 [ 1.921216] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fca100 [ 1.927994] omap-mailbox 31f82000.mailbox: omap mailbox rev 0x66fca100 [ 1.934769] omap-mailbox 31f83000.mailbox: omap mailbox rev 0x66fca100 [ 1.941542] omap-mailbox 31f84000.mailbox: omap mailbox rev 0x66fca100 [ 1.948311] omap-mailbox 31f85000.mailbox: omap mailbox rev 0x66fca100 [ 1.956732] ti-udma 285c0000.dma-controller: Channels: 22 (tchan: 11, rchan: 11, gp-rflow: 8) [ 1.966679] ti-udma 31150000.dma-controller: Channels: 66 (tchan: 33, rchan: 33, gp-rflow: 16) [ 1.978749] spi-nor: probe of spi0.0 failed with error -22 [ 1.986035] spi-nor spi1.0: is25wp064 (8192 Kbytes) [ 1.990952] 7 fixed-partitions partitions found on MTD device 47050000.spi.0 [ 1.997988] Creating 7 MTD partitions on "47050000.spi.0": [ 2.003459] 0x000000000000-0x000000080000 : "qspi.tiboot3" [ 2.009606] 0x000000080000-0x000000280000 : "qspi.tispl" [ 2.015455] 0x000000280000-0x000000680000 : "qspi.u-boot" [ 2.021397] 0x000000680000-0x0000006c0000 : "qspi.env" [ 2.027031] 0x0000006c0000-0x000000700000 : "qspi.env.backup" [ 2.033293] 0x000000800000-0x000003fc0000 : "qspi.rootfs" [ 2.038684] mtd: partition "qspi.rootfs" is out of reach -- disabled [ 2.045544] 0x000003fc0000-0x000004000000 : "qspi.phypattern" [ 2.051282] mtd: partition "qspi.phypattern" is out of reach -- disabled [ 2.096559] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.105049] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver RTL9000AA_RTL9000AN Ethernet [ 2.114879] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 2.127737] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 [ 2.134944] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 [ 2.141073] pps pps0: new PPS source ptp1 [ 2.145219] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a010b, freq:500000000, add_val:1 pps:1 [ 2.155181] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 [ 2.200560] davinci_mdio c200f00.mdio: davinci mdio revision 9.7, bus freq 1000000 [ 2.208385] mdio_bus c200f00.mdio: MDIO device at address 0 is missing. [ 2.215003] am65-cpsw-nuss c200000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 [ 2.227745] am65-cpsw-nuss c200000.ethernet: Use random MAC address [ 2.234001] am65-cpsw-nuss c200000.ethernet: initialized cpsw ale version 1.4 [ 2.241120] am65-cpsw-nuss c200000.ethernet: ALE Table size 64 [ 2.247250] am65-cpsw-nuss c200000.ethernet: CPTS ver 0x4e8a010b, freq:200000000, add_val:4 pps:0 [ 2.257064] am65-cpsw-nuss c200000.ethernet: set new flow-id-base 82 [ 2.264907] debugfs: Directory 'pd:74' with parent 'pm_genpd' already present! [ 2.272143] debugfs: Directory 'pd:73' with parent 'pm_genpd' already present! [ 2.279430] debugfs: Directory 'pd:72' with parent 'pm_genpd' already present! [ 2.287112] debugfs: Directory 'pd:335' with parent 'pm_genpd' already present! [ 2.294419] debugfs: Directory 'pd:333' with parent 'pm_genpd' already present! [ 2.301732] debugfs: Directory 'pd:332' with parent 'pm_genpd' already present! [ 2.317092] ALSA device list: [ 2.320053] No soundcards found. [ 2.349777] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 2.358315] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 2.371374] devtmpfs: mounted [ 2.375118] Freeing unused kernel memory: 2112K [ 2.379744] Run /sbin/init as init process [ 2.781504] systemd[1]: System time before build time, advancing clock. [ 2.858621] NET: Registered PF_INET6 protocol family [ 2.864188] Segment Routing with IPv6 [ 2.867860] In-situ OAM (IOAM) with IPv6 [ 2.916476] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 2.947955] systemd[1]: Detected architecture arm64. Welcome to Arago 2023.10! [ 3.025529] systemd[1]: Hostname set to . [ 3.133113] systemd-sysv-generator[190]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.157866] systemd-sysv-generator[190]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.182458] systemd-sysv-generator[190]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.343176] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 3.392809] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. [ 3.449326] systemd[1]: Queued start job for default target Graphical Interface. [ 3.499867] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 3.521826] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 3.545606] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 3.569430] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.592706] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 3.616657] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 3.640726] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 3.656606] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.676598] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 3.692607] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 3.746356] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 3.772656] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 3.795620] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 3.816710] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.840847] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.860763] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.880788] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.896821] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 3.920816] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.940715] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.960745] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 4.004824] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 4.026859] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.054913] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 4.076782] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). [ 4.092766] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 4.115473] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static Device Nodes... [ 4.142811] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 4.162685] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 4.178882] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 4.234242] fuse: init (API version 7.37) [ 4.248959] systemd[1]: Starting Start psplash boot splash screen... Starting Start psplash boot splash screen... [ 4.280970] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 4.296741] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). [ 4.340984] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.368341] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.383552] cryptodev: loading out-of-tree module taints kernel. [ 4.390369] cryptodev: driver 1.12 loaded. [ 4.392398] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network …ts from Kernel command line... [ 4.419291] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [0m... [ 4.451409] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 4.473011] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 4.488920] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [FAILED] Failed to start Start psplash boot splash screen. See 'systemctl status psplash-start.service' for details. [DEPEND] Dependency failed for Star…progress communication helper. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 4.827909] systemd-journald[212]: Received client request to flush runtime journal. Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Coldplug All udev Devices. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /media/ram... Mounting /var/volatile... [ 5.050839] audit: type=1334 audit(1651167747.268:2): prog-id=5 op=LOAD [ 5.057483] audit: type=1334 audit(1651167747.276:3): prog-id=6 op=LOAD Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /media/ram. [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... [ 5.266569] random: crng init done [ 5.274173] mc: Linux media interface: v0.10 Starting Record System Boot/Shutdown in UTMP... [ 5.308230] videodev: Linux video capture interface: v2.00 [ OK ] Finished Load/Save Random Seed. [ OK ] Found device /dev/ttyS2. [ 5.352999] k3-dsp-rproc 64800000.dsp: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 [ 5.363839] k3-dsp-rproc 64800000.dsp: configured DSP for IPC-only mode [ OK ] Finished Record System Boot/Shutdow[ 5.373302] remoteproc remoteproc0: 64800000.dsp is available n in UTMP. [ 5.382134] remoteproc remoteproc0: attaching to 64800000.dsp [ 5.389754] remoteproc remoteproc0: unsupported resource 65538 [ 5.395803] k3-dsp-rproc 64800000.dsp: DSP initialized in IPC-only mode [ 5.402586] rproc-virtio rproc-virtio.5.auto: assigned reserved memory node vision-apps-c71-dma-memory@b2000000 [ 5.413150] virtio_rpmsg_bus virtio0: rpmsg host is online [ 5.416424] virtio_rpmsg_bus virtio0: creating channel rpmsg_chrdev addr 0xd [ 5.420157] rproc-virtio rproc-virtio.5.auto: registered virtio0 (type 7) [ 5.432604] remoteproc remoteproc0: remote processor 64800000.dsp is now attached [ 5.440681] k3-dsp-rproc 65800000.dsp: assigned reserved memory node vision-apps-c71_1-dma-memory@b4000000 [ 5.450865] k3-dsp-rproc 65800000.dsp: configured DSP for IPC-only mode [ 5.452213] platform 41000000.r5f: R5F core may have been powered on by a different host, programmed state (0) != actual state (1) [ 5.457620] remoteproc remoteproc1: 65800000.dsp is available [ 5.470484] platform 41000000.r5f: configured R5F for IPC-only mode [ 5.475053] remoteproc remoteproc1: attaching to 65800000.dsp [ 5.481660] platform 41000000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 5.487291] remoteproc remoteproc1: unsupported resource 65538 [ 5.497119] remoteproc remoteproc2: 41000000.r5f is available [ 5.502116] k3-dsp-rproc 65800000.dsp: DSP initialized in IPC-only mode [ 5.507797] remoteproc remoteproc2: attaching to 41000000.r5f [ 5.514354] rproc-virtio rproc-virtio.6.auto: assigned reserved memory node vision-apps-c71_1-dma-memory@b4000000 [ 5.521063] platform 41000000.r5f: R5F core initialized in IPC-only mode [ 5.530752] virtio_rpmsg_bus virtio1: rpmsg host is online [ 5.537061] rproc-virtio rproc-virtio.7.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a0000000 [ 5.537475] virtio_rpmsg_bus virtio2: rpmsg host is online [ 5.542573] virtio_rpmsg_bus virtio1: creating channel rpmsg_chrdev addr 0xd [ 5.544610] rproc-virtio rproc-virtio.6.auto: registered virtio1 (type 7) [ 5.544617] remoteproc remoteproc1: remote processor 65800000.dsp is now attached [ 5.552698] rproc-virtio rproc-virtio.7.auto: registered virtio2 (type 7) [ 5.552908] k3-dsp-rproc 66800000.dsp: assigned reserved memory node vision-apps-c71_2-dma-memory@b6000000 [ 5.558139] k3-dsp-rproc 66800000.dsp: configured DSP for IPC-only mode [ 5.558232] virtio_rpmsg_bus virtio2: creating channel ti.ipc4.ping-pong addr 0xd [ 5.558305] virtio_rpmsg_bus virtio2: creating channel rpmsg_chrdev addr 0xe [ 5.565168] remoteproc remoteproc2: remote processor 41000000.r5f is now attached [ 5.572015] remoteproc remoteproc3: 66800000.dsp is available [ 5.580921] platform 41400000.r5f: configured R5F for remoteproc mode [ 5.586477] remoteproc remoteproc3: attaching to 66800000.dsp [ 5.587217] systemd-journald[212]: Oldest entry in /run/log/journal/6ab7cc42335e43bfb366edace2a2a7e6/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 5.587229] systemd-journald[212]: /run/log/journal/6ab7cc42335e43bfb366edace2a2a7e6/system.journal: Journal header limits reached or header out-of-date, rotating. [ 5.596481] platform 41400000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a1000000 [ 5.603151] remoteproc remoteproc3: unsupported resource 65538 [ 5.611119] remoteproc remoteproc4: 41400000.r5f is available [ 5.617276] k3-dsp-rproc 66800000.dsp: DSP initialized in IPC-only mode [ 5.629648] platform 5c00000.r5f: configured R5F for IPC-only mode [ 5.630459] rproc-virtio rproc-virtio.8.auto: assigned reserved memory node vision-apps-c71_2-dma-memory@b6000000 [ 5.637119] platform 5c00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 5.643140] virtio_rpmsg_bus virtio3: rpmsg host is online [ 5.646469] virtio_rpmsg_bus virtio3: creating channel rpmsg_chrdev addr 0xd [ 5.660389] remoteproc remoteproc4: Direct firmware load for j784s4-mcu-r5f0_1-fw failed with error -2 [ 5.661768] remoteproc remoteproc5: 5c00000.r5f is available [ 5.661820] remoteproc remoteproc5: attaching to 5c00000.r5f [ 5.662211] platform 5c00000.r5f: R5F core initialized in IPC-only mode [ 5.662224] rproc-virtio rproc-virtio.9.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a2000000 [ 5.662596] virtio_rpmsg_bus virtio4: rpmsg host is online [ 5.662612] rproc-virtio rproc-virtio.9.auto: registered virtio4 (type 7) [ 5.662616] remoteproc remoteproc5: remote processor 5c00000.r5f is now attached [ 5.662797] platform 5d00000.r5f: configured R5F for IPC-only mode [ 5.662957] platform 5d00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000 [ 5.663529] remoteproc remoteproc6: 5d00000.r5f is available [ 5.663572] remoteproc remoteproc6: attaching to 5d00000.r5f [ 5.663747] platform 5d00000.r5f: R5F core initialized in IPC-only mode [ 5.663758] rproc-virtio rproc-virtio.10.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a4000000 [ 5.664115] virtio_rpmsg_bus virtio5: rpmsg host is online [ 5.664129] rproc-virtio rproc-virtio.10.auto: registered virtio5 (type 7) [ 5.664133] remoteproc remoteproc6: remote processor 5d00000.r5f is now attached [ 5.666097] platform 5e00000.r5f: configured R5F for IPC-only mode [ 5.666278] platform 5e00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a5000000 [ 5.666843] remoteproc remoteproc7: 5e00000.r5f is available [ 5.666885] remoteproc remoteproc7: attaching to 5e00000.r5f [ 5.667205] platform 5e00000.r5f: R5F core initialized in IPC-only mode [ 5.667218] rproc-virtio rproc-virtio.11.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a5000000 [ 5.667644] virtio_rpmsg_bus virtio6: rpmsg host is online [ 5.667659] rproc-virtio rproc-virtio.11.auto: registered virtio6 (type 7) [ 5.667663] remoteproc remoteproc7: remote processor 5e00000.r5f is now attached [ 5.667827] platform 5f00000.r5f: configured R5F for IPC-only mode [ 5.667978] platform 5f00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000 [ 5.668525] remoteproc remoteproc8: 5f00000.r5f is available [ 5.668585] remoteproc remoteproc8: attaching to 5f00000.r5f [ 5.668802] platform 5f00000.r5f: R5F core initialized in IPC-only mode [ 5.668812] rproc-virtio rproc-virtio.12.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a6000000 [ 5.669246] virtio_rpmsg_bus virtio7: rpmsg host is online [ 5.669261] rproc-virtio rproc-virtio.12.auto: registered virtio7 (type 7) [ 5.669265] remoteproc remoteproc8: remote processor 5f00000.r5f is now attached [ 5.677210] rproc-virtio rproc-virtio.8.auto: registered virtio3 (type 7) [ 5.684718] remoteproc remoteproc4: powering up 41400000.r5f [ 5.685344] platform 5900000.r5f: configured R5F for IPC-only mode [ 5.685594] platform 5900000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000 [ 5.686410] remoteproc remoteproc9: 5900000.r5f is available [ 5.686463] remoteproc remoteproc9: attaching to 5900000.r5f [ 5.686789] platform 5900000.r5f: R5F core initialized in IPC-only mode [ 5.686800] rproc-virtio rproc-virtio.13.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a7000000 [ 5.689897] remoteproc remoteproc3: remote processor 66800000.dsp is now attached [ 5.691680] k3-dsp-rproc 67800000.dsp: assigned reserved memory node vision-apps-c71_3-dma-memory@b8000000 [ 5.692418] virtio_rpmsg_bus virtio8: rpmsg host is online [ 5.692467] rproc-virtio rproc-virtio.13.auto: registered virtio8 (type 7) [ 5.692472] remoteproc remoteproc9: remote processor 5900000.r5f is now attached [ 5.692921] platform 5a00000.r5f: configured R5F for IPC-only mode [ 5.693036] platform 5a00000.r5f: assigned reserved memory node vision-apps-r5f-dma-memory@a8000000 [ 5.693482] remoteproc remoteproc11: 5a00000.r5f is available [ 5.693529] remoteproc remoteproc11: attaching to 5a00000.r5f [ 5.695460] platform 5a00000.r5f: R5F core initialized in IPC-only mode [ 5.695475] rproc-virtio rproc-virtio.14.auto: assigned reserved memory node vision-apps-r5f-dma-memory@a8000000 [ 5.695767] remoteproc remoteproc4: Direct firmware load for j784s4-mcu-r5f0_1-fw failed with error -2 [ 5.696479] virtio_rpmsg_bus virtio9: rpmsg host is online [ 5.696503] rproc-virtio rproc-virtio.14.auto: registered virtio9 (type 7) [ 5.696507] remoteproc remoteproc11: remote processor 5a00000.r5f is now attached [ 5.703426] k3-dsp-rproc 67800000.dsp: configured DSP for IPC-only mode [ 5.708562] remoteproc remoteproc4: request_firmware failed: -2 [ 5.778421] omap_rng 4e10000.rng: Random Number Generator ver. 241b34c [ 5.783477] remoteproc remoteproc10: 67800000.dsp is available [ 5.783852] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled [ 5.783860] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled [ 5.783863] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled [ 5.783867] cdns-ufshcd 4e84000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled [ 6.217757] remoteproc remoteproc10: attaching to 67800000.dsp [ 6.218437] scsi host0: ufshcd [ OK ] Started Network Time Synchronizatio[ 6.224000] remoteproc remoteproc10: unsupported resource 65538 n. [ 6.238229] k3-dsp-rproc 67800000.dsp: DSP initialized in IPC-only mode [ 6.245425] rproc-virtio rproc-virtio.15.auto: assigned reserved memory node vision-apps-c71_3-dma-memory@b8000000 [ 6.256362] virtio_rpmsg_bus virtio10: rpmsg host is online [ 6.259651] virtio_rpmsg_bus virtio10: creating channel rpmsg_chrdev addr 0xd [ 6.263054] rproc-virtio rproc-virtio.15.auto: registered virtio10 (type 7) [ 6.276075] remoteproc remoteproc10: remote processor 67800000.dsp is now attached [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target System Time Set. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timer Units. [ OK ] Reached target Hardware activated USB gadget. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... [ OK ] Listening on dropbear.socket. [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. Starting Weston socket... Starting Console System Startup Logging... Starting D-Bus System Message Bus... Starting Reboot and dump vmcore via kexec... [ 6.633572] cdns-ufshcd 4e84000.ufs: link startup failed 1 [ 6.639069] cdns-ufshcd 4e84000.ufs: UFS Host state=0 [ 6.639072] cdns-ufshcd 4e84000.ufs: outstanding reqs=0x0 tasks=0x0 [ 6.639076] cdns-ufshcd 4e84000.ufs: saved_err=0x0, saved_uic_err=0x0 [ 6.656825] cdns-ufshcd 4e84000.ufs: Device power mode=1, UIC link state=0 [ OK ] Listening on Docker Socket for the [ 6.663693] cdns-ufshcd 4e84000.ufs: PM in progress=0, sys. suspended=0 API. [ 6.675837] cdns-ufshcd 4e84000.ufs: Auto BKOPS=0, Host self-block=0 [ 6.683031] cdns-ufshcd 4e84000.ufs: Clk gate=1 [ 6.687559] cdns-ufshcd 4e84000.ufs: last_hibern8_exit_tstamp at 0 us, hibern8_exit_cnt=0 [ 6.695729] cdns-ufshcd 4e84000.ufs: last intr at 6633554 us, last intr status=0x404 [ 6.695735] cdns-ufshcd 4e84000.ufs: error handling flags=0x0, req. abort count=0 [ 6.710930] cdns-ufshcd 4e84000.ufs: hba->ufs_version=0x210, Host capabilities=0x1587031f, caps=0x0 [ 6.719961] cdns-ufshcd 4e84000.ufs: quirks=0x0, dev. quirks=0x0 [ OK ] Listening on Weston socket. [ 6.725961] cdns-ufshcd 4e84000.ufs: clk: core_clk, rate: 250000000 [ 6.737582] cdns-ufshcd 4e84000.ufs: clk: phy_clk, rate: 19200000 [ 6.743668] cdns-ufshcd 4e84000.ufs: clk: ref_clk, rate: 19200000 [ 6.743699] host_regs: 00000000: 1587031f 00000000 00000210 00000000 [ 6.756095] host_regs: 00000010: 00000000 00000000 00000000 00000000 [ OK ] Started D-Bus System Message Bus 6.762444] host_regs: 00000020: 00000000 00000470 00000000 00000000 m. [ 6.774330] host_regs: 00000030: 00000008 00000001 00000000 00000000 [ 6.781011] host_regs: 00000040: 00000000 00000000 00000000 00000000 [ 6.787359] host_regs: 00000050: 00000000 00000000 00000000 00000000 [ 6.787362] host_regs: 00000060: 00000000 00000000 00000000 00000000 [ 6.787365] host_regs: 00000070: 00000000 00000000 00000000 00000000 [ 6.787368] host_regs: 00000080: 00000000 00000000 00000000 00000000 [ OK ] Finished Console System Startup Log[ 6.812714] host_regs: 00000090: 00000016 00000000 00000001 00000000 ging. [ 6.824601] cdns-ufshcd 4e84000.ufs: No record of pa_err [ 6.830846] cdns-ufshcd 4e84000.ufs: No record of dl_err [ 6.836150] cdns-ufshcd 4e84000.ufs: No record of nl_err [ 6.836153] cdns-ufshcd 4e84000.ufs: No record of tl_err [ 6.836155] cdns-ufshcd 4e84000.ufs: No record of dme_err [ 6.836158] cdns-ufshcd 4e84000.ufs: No record of auto_hibern8_err [ OK ] Finished Reboot and dump vmcore via[ 6.858296] cdns-ufshcd 4e84000.ufs: No record of fatal_err kexec. [ 6.869406] cdns-ufshcd 4e84000.ufs: link_startup_fail[0] = 0x1 at 6633568 us [ 6.877640] cdns-ufshcd 4e84000.ufs: link_startup_fail: total cnt=1 [ 6.883907] cdns-ufshcd 4e84000.ufs: No record of resume_fail [ 6.889651] cdns-ufshcd 4e84000.ufs: No record of suspend_fail [ 6.889654] cdns-ufshcd 4e84000.ufs: No record of dev_reset [ 6.889658] cdns-ufshcd 4e84000.ufs: No record of host_reset [ 6.889660] cdns-ufshcd 4e84000.ufs: No record of task_abort [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting DEMO... Starting Print notice about GPLv3 packages... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started irqbalance daemon. Starting Telephony service... Starting Expand the rootfs…ll size of the boot device.... [ OK ] Started startwlanap. [ OK ] Started startwlansta. [ OK ] Started strongSwan IPsec I…IKEv2 daemon using ipsec.conf. [ 7.252523] audit: type=1334 audit(1708470316.666:4): prog-id=7 op=LOAD [ 7.259162] audit: type=1334 audit(1708470316.674:5): prog-id=8 op=LOAD Starting User Login Management... [ OK ] Started TEE Supplicant. Starting Telnet Server... [ OK ] Started DEMO. [FAILED] Failed to start Print notice about GPLv3 packages. See 'systemctl status gplv3-notice.service' for details. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Telnet Server. [ OK ] Started Telephony service. [ OK ] Started User Login Management. [ OK ] Finished Expand the rootfs…full size of the boot device.. [ OK ] Created slice Slice /system/systemd-fsck. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ 7.585495] Bluetooth: Core ver 2.22 [ 7.589143] NET: Registered PF_BLUETOOTH protocol family [ 7.594499] Bluetooth: HCI device and connection manager initialized [ 7.600863] Bluetooth: HCI socket layer initialized [ 7.605762] Bluetooth: L2CAP socket layer initialized [ OK ] Found device /dev/mmcblk1p1.[ 7.610837] Bluetooth: SCO socket layer initialized [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting File System Check on /dev/mmcblk1p1... [ 7.800783] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.813434] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ OK ] Started Network Configuration. Starting Network Name Resolution... [ 7.936565] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [RTL9000AA_RTL9000AN Ethernet] (irq=POLL) [ 7.947622] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode [ OK ] Finished File System Check on /dev/mmcblk1p1. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. Mounting /run/media/boot-mmcblk1p1... Starting Avahi mDNS/DNS-SD Stack... Starting Enable and configure wl18xx bluetooth stack... Starting containerd container runtime... [ OK ] Started Netperf Benchmark Server. [ OK ] Started NFS status monitor for NFSv2/3 locking.. Starting Simple Network Ma…ent Protocol (SNMP) Daemon.... Starting Permit User Sessions... [FAILED] Failed to start Enable and…figure wl18xx bluetooth stack. See 'systemctl status bt-enable.service' for details. [ OK ] Finished Permit User Sessions. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS2. [ OK ] Reached target Login Prompts. Starting Synchronize System and HW clocks... Starting Weston, a Wayland…ositor, as a system service... [ OK ] Mounted /run/media/boot-mmcblk1p1. [ 9.065703] audit: type=1334 audit(1708470318.482:6): prog-id=9 op=LOAD [ 9.072373] audit: type=1334 audit(1708470318.486:7): prog-id=10 op=LOAD Starting User Database Manager... [ OK ] Started User Database Manager. [ OK ] Created slice User Slice of UID 1000. Starting User Runtime Directory /run/user/1000... [ OK ] Finished User Runtime Directory /run/user/1000. Starting User Manager for UID 1000... [ 9.514579] audit: type=1006 audit(1708470318.930:8): pid=670 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 [ 9.527121] audit: type=1300 audit(1708470318.930:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffad8fbe8 a2=4 a3=ffff82dd0020 items=0 ppid=1 pid=670 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 9.553600] audit: type=1327 audit(1708470318.930:8): proctitle="(systemd)" [ OK ] Finished Synchronize System and HW clocks. [ OK ] Started User Manager for UID 1000. [ OK ] Started Session c1 of User weston. [ 10.032399] audit: type=1006 audit(1708470319.446:9): pid=648 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 [ 10.044771] audit: type=1300 audit(1708470319.446:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffffad8fbe8 a2=4 a3=ffff82dd0020 items=0 ppid=1 pid=648 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) [ 10.070980] audit: type=1327 audit(1708470319.446:9): proctitle="(weston)" [ OK ] Started Simple Network Man…ement Protocol (SNMP) Daemon.. [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. [ OK ] Started containerd container runtime. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. _____ _____ _ _ | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | | _| .'| . | . | | __| _| . | | | -_| _| _| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| |___| |___| Arago Project j784s4-evm - Arago 2023.10 j784s4-evm - j784s4-evm login: ro[ 16.293442] platform main-r5fss-cpsw9g-virt-mac1: deferred probe pending [ 16.300143] platform main-r5fss-cpsw9g-virt-mac0: deferred probe pending [ 16.306837] platform 2900000.pcie: deferred probe pending [ 16.312228] platform dp0-connector: deferred probe pending [ 16.317702] platform 2910000.pcie: deferred probe pending [ 16.323088] platform regulator-sd: deferred probe pending [ 16.328476] platform regulator-dp0-prw: deferred probe pending [ 16.334296] platform regulator-dp1-prw: deferred probe pending [ 16.340115] platform 4800000.dsi: deferred probe pending [ 16.345414] platform a000000.dp-bridge: deferred probe pending ot [ 16.759142] audit: type=1006 audit(1708470326.174:10): pid=706 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 [ 16.771524] audit: type=1300 audit(1708470326.174:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffffad8fbe8 a2=1 a3=ffff82dd0020 items=0 ppid=1 pid=706 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) [ 16.797815] audit: type=1327 audit(1708470326.174:10): proctitle="(systemd)" [ 16.804873] audit: type=1334 audit(1708470326.186:11): prog-id=11 op=LOAD [ 16.811668] audit: type=1300 audit(1708470326.186:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe4eed260 a2=78 a3=0 items=0 ppid=1 pid=706 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) [ 16.837005] audit: type=1327 audit(1708470326.186:11): proctitle="(systemd)" [ 16.844047] audit: type=1334 audit(1708470326.186:12): prog-id=11 op=UNLOAD [ 16.851000] audit: type=1334 audit(1708470326.186:13): prog-id=12 op=LOAD [ 16.857778] audit: type=1300 audit(1708470326.186:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe4eed300 a2=78 a3=0 items=0 ppid=1 pid=706 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) [ 16.883105] audit: type=1327 audit(1708470326.186:13): proctitle="(systemd)" [ 16.924012] vdec 4210000.video-codec: VPU wakeup(W5_VPU_REMAP_CORE_START) timeout [ 16.924053] vdec 4220000.video-codec: VPU wakeup(W5_VPU_REMAP_CORE_START) timeout root@j784s4-evm:~# root@j784s4-evm:~# root@j784s4-evm:~# root@j784s4-evm:~# root@j784s4-evm:~# root@j784s4-evm:~# /opt/vision_apps/vision_apps_init.sh root@j784s4-evm:~# [MCU2_0] 3.863954 s: CIO: Init ... Done !!! [MCU2_0] 3.863989 s: ### CPU Frequency = 1000000000 Hz [MCU2_0] 3.864015 s: CPU is running FreeRTOS [MCU2_0] 3.864031 s: APP: Init ... !!! [MCU2_0] 3.864049 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 4f02000000 [MCU2_0] 3.864093 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU2_0] 3.864132 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864167 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864202 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864237 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864272 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864307 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864342 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864377 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864412 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864447 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864482 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864517 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864553 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864587 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864623 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864664 s: appMemAddrTranslate(): Using RAT region 1 for translation of address : 8a0000000 [MCU2_0] 3.864696 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU2_0] 3.864721 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU2_0] 3.864756 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864791 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864826 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864861 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864896 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864931 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.864966 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865001 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865036 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865071 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865106 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865141 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865177 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865212 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.865247 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_0] 3.964102 s: set TCA9539 pin is output! ***** [MCU2_0] 4.063475 s: **** appGMSL loop High ! [MCU2_0] 4.163913 s: **** read TCA9539_0, 0x2 val:0xf8 [MCU2_0] 4.164375 s: **** read TCA9539_1, 0x2 val:0x03 [MCU2_1] 3.871195 s: CIO: Init ... Done !!! [MCU2_1] 3.871249 s: ### CPU Frequency = 1000000000 Hz [MCU2_1] 3.871276 s: CPU is running FreeRTOS [MCU2_1] 3.871292 s: APP: Init ... !!! [MCU2_1] 3.871310 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 4f02040000 [MCU2_1] 3.871354 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU2_1] 3.871392 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871428 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871463 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871498 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871534 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871570 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871605 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871640 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871676 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871711 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871747 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871783 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871819 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871854 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871891 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.871928 s: appMemAddrTranslate(): Using RAT region 1 for translation of address : 8a0000000 [MCU2_1] 3.871960 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU2_1] 3.871987 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU2_1] 3.872023 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872058 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872093 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872128 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872163 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872198 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872233 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872268 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872303 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872338 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872373 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872408 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872444 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872479 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU2_1] 3.872514 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.911868 s: CIO: Init ... Done !!! [MCU3_0] 3.911916 s: ### CPU Frequency = 1000000000 Hz [MCU3_0] 3.911939 s: CPU is running FreeRTOS [MCU3_0] 3.911954 s: APP: Init ... !!! [MCU3_0] 3.911971 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 8a0000000 [MCU3_0] 3.912007 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU3_0] 3.912033 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912070 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912105 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912140 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912175 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912210 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912245 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912280 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912316 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912350 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912386 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912421 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912457 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912492 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912528 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_0] 3.912563 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.952772 s: CIO: Init ... Done !!! [MCU3_1] 3.952820 s: ### CPU Frequency = 1000000000 Hz [MCU3_1] 3.952845 s: CPU is running FreeRTOS [MCU3_1] 3.952860 s: APP: Init ... !!! [MCU3_1] 3.952878 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 8a0000000 [MCU3_1] 3.952913 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU3_1] 3.952938 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.952974 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953010 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953044 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953080 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953115 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953150 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953185 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953220 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953255 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953290 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953326 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953361 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953397 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953432 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU3_1] 3.953468 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020263 s: CIO: Init ... Done !!! [MCU4_0] 4.020314 s: ### CPU Frequency = 1000000000 Hz [MCU4_0] 4.020340 s: CPU is running FreeRTOS [MCU4_0] 4.020357 s: APP: Init ... !!! [MCU4_0] 4.020378 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 4f02080000 [MCU4_0] 4.020421 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU4_0] 4.020460 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020496 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020531 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020565 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020600 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020635 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020671 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020705 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020741 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020775 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020811 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020846 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020881 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020916 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020951 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.020988 s: appMemAddrTranslate(): Using RAT region 1 for translation of address : 8a0000000 [MCU4_0] 4.021019 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU4_0] 4.021044 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 1 [MCU4_0] 4.021079 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021114 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021149 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021184 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021219 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021254 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021289 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021324 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021359 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021394 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021429 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021464 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021499 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021535 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_0] 4.021570 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050360 s: CIO: Init ... Done !!! [MCU4_1] 4.050409 s: ### CPU Frequency = 1000000000 Hz [MCU4_1] 4.050431 s: CPU is running FreeRTOS [MCU4_1] 4.050446 s: APP: Init ... !!! [MCU4_1] 4.050462 s: appMemAddrTranslate(): Using RAT region 0 for translation of address : 8a0000000 [MCU4_1] 4.050496 s: appMemAddrTranslate(): Error in CSL_ratConfigRegionTranslation() [MCU4_1] 4.050523 s: appMemAddrTranslate(): RAT region 0 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050559 s: appMemAddrTranslate(): RAT region 1 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050594 s: appMemAddrTranslate(): RAT region 2 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050629 s: appMemAddrTranslate(): RAT region 3 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050664 s: appMemAddrTranslate(): RAT region 4 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050699 s: appMemAddrTranslate(): RAT region 5 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050734 s: appMemAddrTranslate(): RAT region 6 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050769 s: appMemAddrTranslate(): RAT region 7 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050804 s: appMemAddrTranslate(): RAT region 8 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050839 s: appMemAddrTranslate(): RAT region 9 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050874 s: appMemAddrTranslate(): RAT region 10 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050909 s: appMemAddrTranslate(): RAT region 11 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050945 s: appMemAddrTranslate(): RAT region 12 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.050980 s: appMemAddrTranslate(): RAT region 13 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.051015 s: appMemAddrTranslate(): RAT region 14 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [MCU4_1] 4.051051 s: appMemAddrTranslate(): RAT region 15 translation enabled status after OCMC map (0: disabled, 1: enabled): 0 [C7x_1 ] 4.406836 s: CIO: Init ... Done !!! [C7x_1 ] 4.406850 s: ### CPU Frequency = 1000000000 Hz [C7x_1 ] 4.406861 s: CPU is running FreeRTOS [C7x_1 ] 4.406870 s: APP: Init ... !!! [C7x_1 ] 4.406878 s: SCICLIENT: Init ... !!! [C7x_1 ] 4.406984 s: SCICLIENT: DMSC FW version [9.1.2--v09.01.02 (Kool Koala)] [C7x_1 ] 4.406998 s: SCICLIENT: DMSC FW revision 0x9 [C7x_1 ] 4.407008 s: SCICLIENT: DMSC FW ABI revision 3.1 [C7x_1 ] 4.407019 s: SCICLIENT: Init ... Done !!! [C7x_1 ] 4.407029 s: UDMA: Init ... !!! [C7x_1 ] 4.407938 s: UDMA: Init ... Done !!! [C7x_1 ] 4.407949 s: MEM: Init ... !!! [C7x_1 ] 4.407960 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 102000000 of size 33554432 bytes !!! [C7x_1 ] 4.407982 s: MEM: Init ... Done !!! [C7x_1 ] 4.407991 s: IPC: Init ... !!! [C7x_1 ] 4.408004 s: IPC: 11 CPUs participating in IPC !!! [C7x_1 ] 4.408019 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_1 ] 13.386192 s: IPC: HLOS is ready !!! [C7x_1 ] 13.389488 s: IPC: Init ... Done !!! [C7x_1 ] 13.389503 s: APP: Syncing with 10 CPUs ... !!! [C7x_2 ] 4.731104 s: CIO: Init ... Done !!! [C7x_2 ] 4.731118 s: ### CPU Frequency = 1000000000 Hz [C7x_2 ] 4.731130 s: CPU is running FreeRTOS [C7x_2 ] 4.731138 s: APP: Init ... !!! [C7x_2 ] 4.731146 s: SCICLIENT: Init ... !!! [C7x_2 ] 4.731257 s: SCICLIENT: DMSC FW version [9.1.2--v09.01.02 (Kool Koala)] [C7x_2 ] 4.731271 s: SCICLIENT: DMSC FW revision 0x9 [C7x_2 ] 4.731281 s: SCICLIENT: DMSC FW ABI revision 3.1 [C7x_2 ] 4.731293 s: SCICLIENT: Init ... Done !!! [C7x_2 ] 4.731302 s: UDMA: Init ... !!! [C7x_2 ] 4.732124 s: UDMA: Init ... Done !!! [C7x_2 ] 4.732135 s: MEM: Init ... !!! [C7x_2 ] 4.732147 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 102000000 of size 33554432 bytes !!! [C7x_2 ] 4.732167 s: MEM: Init ... Done !!! [C7x_2 ] 4.732177 s: IPC: Init ... !!! [C7x_2 ] 4.732190 s: IPC: 11 CPUs participating in IPC !!! [C7x_2 ] 4.732204 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_2 ] 13.503791 s: IPC: HLOS is ready !!! [C7x_2 ] 13.507028 s: IPC: Init ... Done !!! [C7x_2 ] 13.507042 s: APP: Syncing with 10 CPUs ... !!! [C7x_3 ] 5.042866 s: CIO: Init ... Done !!! [C7x_3 ] 5.042881 s: ### CPU Frequency = 1000000000 Hz [C7x_3 ] 5.042892 s: CPU is running FreeRTOS [C7x_3 ] 5.042902 s: APP: Init ... !!! [C7x_3 ] 5.042909 s: SCICLIENT: Init ... !!! [C7x_3 ] 5.043020 s: SCICLIENT: DMSC FW version [9.1.2--v09.01.02 (Kool Koala)] [C7x_3 ] 5.043033 s: SCICLIENT: DMSC FW revision 0x9 [C7x_3 ] 5.043044 s: SCICLIENT: DMSC FW ABI revision 3.1 [C7x_3 ] 5.043054 s: SCICLIENT: Init ... Done !!! [C7x_3 ] 5.043064 s: UDMA: Init ... !!! [C7x_3 ] 5.043887 s: UDMA: Init ... Done !!! [C7x_3 ] 5.043899 s: MEM: Init ... !!! [C7x_3 ] 5.043910 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 102000000 of size 33554432 bytes !!! [C7x_3 ] 5.043931 s: MEM: Init ... Done !!! [C7x_3 ] 5.043939 s: IPC: Init ... !!! [C7x_3 ] 5.043954 s: IPC: 11 CPUs participating in IPC !!! [C7x_3 ] 5.043968 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_3 ] 13.616182 s: IPC: HLOS is ready !!! [C7x_3 ] 13.619537 s: IPC: Init ... Done !!! [C7x_3 ] 13.619553 s: APP: Syncing with 10 CPUs ... !!! [C7x_4 ] 5.354166 s: CIO: Init ... Done !!! [C7x_4 ] 5.354181 s: ### CPU Frequency = 1000000000 Hz [C7x_4 ] 5.354192 s: CPU is running FreeRTOS [C7x_4 ] 5.354201 s: APP: Init ... !!! [C7x_4 ] 5.354208 s: SCICLIENT: Init ... !!! [C7x_4 ] 5.354324 s: SCICLIENT: DMSC FW version [9.1.2--v09.01.02 (Kool Koala)] [C7x_4 ] 5.354337 s: SCICLIENT: DMSC FW revision 0x9 [C7x_4 ] 5.354347 s: SCICLIENT: DMSC FW ABI revision 3.1 [C7x_4 ] 5.354359 s: SCICLIENT: Init ... Done !!! [C7x_4 ] 5.354368 s: UDMA: Init ... !!! [C7x_4 ] 5.355180 s: UDMA: Init ... Done !!! [C7x_4 ] 5.355192 s: MEM: Init ... !!! [C7x_4 ] 5.355203 s: MEM: Created heap (DDR_LOCAL_MEM, id=0, flags=0x00000004) @ 102000000 of size 33554432 bytes !!! [C7x_4 ] 5.355225 s: MEM: Init ... Done !!! [C7x_4 ] 5.355234 s: IPC: Init ... !!! [C7x_4 ] 5.355247 s: IPC: 11 CPUs participating in IPC !!! [C7x_4 ] 5.355262 s: IPC: Waiting for HLOS to be ready ... !!! [C7x_4 ] 14.229404 s: IPC: HLOS is ready !!! [C7x_4 ] 14.232729 s: IPC: Init ... Done !!! [C7x_4 ] 14.232743 s: APP: Syncing with 10 CPUs ... !!! root@j784s4-evm:~# /opt/vision_apps/vx_app_kernel_practice.out APP: Init ... !!! MEM: Init ... !!! MEM: Initialized DMA HEAP (fd=5) !!! MEM: Init ... Done !!! IPC: Init ... !!! _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio4.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio5.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio6.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio7.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio8.rpmsg_chrdev.-1.13 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio9.rpmsg_chrdev.-1.13 IPC: ERROR: Unab[ 155.567279] kauditd_printk_skb: 1 callbacks suppressed le to create TX channels for CPU [mcu2_0] !!! IPC: ERROR: Unabl[ 155.567288] audit: type=1701 audit(1708470464.982:15): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=728 comm="vx_app_kernel_p" exe="/opt/vision_apps/vx_app_kernel_practice.out" sig=11 res=1 e to create TX channels for CPU [mcu2_1] !!! IPC: ERROR: Unable[ 155.596621] audit: type=1334 audit(1708470465.014:16): prog-id=13 op=LOAD to create TX channels for CPU [mcu3_0] !!! IPC: ERROR: Unable [ 155.608882] audit: type=1334 audit(1708470465.026:17): prog-id=14 op=LOAD to create TX channels for CPU [mcu3_1] !!! IPC: ERROR: Unable to create TX channels for CPU [mcu4_0] !!! IPC: ERROR: Unable to create TX channels for CPU [mcu4_1] !!! IPC: Init ... Done !!! APP: ERROR: IPC init failed !!! REMOTE_SERVICE: Init ... !!! _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio4.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio5.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio6.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio7.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio8.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio9.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio0.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio1.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio3.rpmsg_chrdev.-1.21 _rpmsg_char_find_ctrldev: could not find the matching rpmsg_ctrl device for virtio10.rpmsg_chrdev.-1.21 REMOTE_SERVICE: Init ... Done !!! 163.497989 s: GTC Frequency = 200 MHz APP: Init ... Done !!! 163.504081 s: VX_ZONE_INIT:Enabled 163.504091 s: VX_ZONE_ERROR:Enabled 163.504097 s: VX_ZONE_WARNING:Enabled 163.509853 s: VX_ZONE_INIT:[tivxInitLocal:130] Initialization Done !!! 163.517725 s: VX_ZONE_INIT:[tivxHostInitLocal:101] Initialization Done for HOST !!! appInit done ******* kernel_practice_create Enter ********* [MEM linux dma heap] appMemAlloc Enter =======local_params0.testdata0 = 1 =======local_params0.testdata1 = 2 163.535766 s: VX_ZONE_ERROR:[vxSetNodeTarget:2182] Target ID is invalid for node node_2 usecase_node_create_node_1 done kernel_practice_create done kernel_practice_verify done kernel_practice_run done kernel_practice_delete done 163.535793 s: VX_ZONE_INIT:[tivxHostDeInitLocal:115] De-Initialization Done for HOST !!! 163.535813 s: VX_ZONE_ERROR:[ownObjectDeInit:171] Is graph use failed, index: 0 163.535820 s: VX_ZONE_ERROR:[ownObjectDeInit:177] Is node use failed, index: 0 163.535827 s: VX_ZONE_ERROR:[ownObjectDeInit:183] Is kernel use failed, index: 0 163.535833 s: VX_ZONE_ERROR:[ownObjectDeInit:184] kernel name: org.khronos.openvx.absdiff 163.535841 s: VX_ZONE_ERROR:[ownObjectDeInit:196] Is user data object use failed, index: 0 163.535849 s: VX_ZONE_ERROR:[ownObjectDeInit:234] Is image use failed, index: 0 163.535857 s: VX_ZONE_ERROR:[ownObjectDeInit:282] Is error use failed, index: 0 163.540215 s: VX_ZONE_INIT:[tivxDeInitLocal:193] De-Initialization Done !!! APP: Deinit ... !!! REMOTE_SERVICE: Deinit ... !!! REMOTE_SERVICE: Deinit ... Done !!! IPC: Deinit ... !!! Segmentation fault (core dumped) root@j784s4-evm:~# [ 156.948630] audit: type=1334 audit(1708470466.366:18): prog-id=14 op=UNLOAD [ 156.955604] audit: type=1334 audit(1708470466.366:19): prog-id=13 op=UNLOAD