07-03-2026 19:01:28.659 [RX] - <CR><LF>
<LF>
<LF>
<LF><CR>
<HT>	 ==============================================<LF><CR>
<HT>	    AT Commands Example    <LF><CR>
<HT>	 ==============================================<LF><CR>
<LF><CR>
<HT>	 HOST version: upper_mac_3.0.8.47<LF><CR>
<LF><CR>
<HT>	 ==============================================<LF><CR>
<LF><CR>
<LF><CR>
Enter AT Command:<LF><CR>
<LF><CR>
user: 
07-03-2026 19:01:32.921 [TX] - at+ate1<CR><LF>

07-03-2026 19:01:32.933 [RX] - at+ate1<CR><LF>
<CR><LF>
<CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:01:35.257 [TX] - at+test<CR><LF>

07-03-2026 19:01:35.270 [RX] - at+test<CR><LF>
<CR>
OK<CR><LF>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:01:37.916 [TX] - at+version<CR><LF>

07-03-2026 19:01:37.926 [RX] - at+version<CR><LF>
<CR>
+version:upper_mac_3.0.8.47<CR><LF>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:01:41.272 [TX] - at+help<CR><LF>

07-03-2026 19:01:41.286 [RX] - at+help<CR><LF>
<CR>
================================================================================<LF><CR>
Available commands:<LF><CR>
--------------------------------------------------------------------------------<LF><CR>
Command Name          =Command Parameters<LF><CR>
--------------------------------------------------------------------------------<LF><CR>
AT+help               =[]<LF><CR>
AT+test               =[]<LF><CR>
AT+version            =[]<LF><CR>
AT+ate1               =[]<LF><CR>
AT+ate0               =[]<LF><CR>
AT+wlanstart          =[]<LF><CR>
AT+wlanstop           =[]<LF><CR>
AT+wlanconnect        =[SSID],[BSSID],[SecurityType],[SecurityKey],[SecurityExtUser],[SecurityExtAnonUser],[SecurityExtEapMethod]<LF><CR>
AT+wlanscan           =[count]<LF><CR>
AT+wlandisconnect     =[]<LF><CR>
AT+wlanstaroleup      =[]<LF><CR>
AT+wlanaproleup       =[SSID],[Security Type],[Password],[Hidden_SSID],[Channel],[Max Stations]<LF><CR>
AT+wlanroledown       =[role]<LF><CR>
AT+wlansetmacaddress  =[role],[MacAdress]<LF><CR>
AT+wlangetmacaddress  =[RoleType]<LF><CR>
AT+socket             =[Family],[Type],[Protocol]<LF><CR>
AT+close              =[Socket]<LF><CR>
AT+accept             =[Socket],[Family]<LF><CR>
AT+bind               =[Socket],[Family],[Port],[IP Address]<LF><CR>
AT+listen             =[Socket],[Backlog]<LF><CR>
AT+connect            =[Socket],[Family],[Port],[IP Address]<LF><CR>
AT+send               =[sd],[format],[length],[data]<LF><CR>
AT+recv               =[sd],[format],[length]<LF><CR>
AT+sendto             =[sd],[family],[port],[addr],[format],[length],[data]<LF><CR>
AT+recvfrom           =[sd],[format],[length]<LF><CR>
AT+netcfgsetinterfaceip=[Role],[IP Mode]<,[IP Address],[Masknet],[Gateway]><LF><CR>
AT+netcfggetinterfaceip=[Role]<LF><CR>
AT+netcfgsetdhcpserver=[Lease Time],[Start IP],[End IP]<LF><CR>
AT+netcfggetdhcpserver=[]<LF><CR>
AT+ping               =[Target IP]<,[Delay Interval]><,[Count]><,[Payload Size]><,[Source IP]><LF><CR>
AT+pingstop           =[Session ID]<LF><CR>
AT+bleinit            =[Mode]<LF><CR>
AT+blesetmacaddress   =[AddressType]<LF><CR>
AT+blegetmacaddress   =[]<LF><CR>
AT+blesetdevicename   =[DeviceName]<LF><CR>
AT+blegetdevicename   =[]<LF><CR>
AT+blesetscancfg      =[ScanType],[OwnAddressType],[FilterPolicy],[ScanInterval],[ScanWindow]<LF><CR>
AT+blegetscancfg      =[]<LF><CR>
AT+blescan            =[Enable]<,[Duration]><LF><CR>
AT+bleconnect         =[PeerAddress],[PeerAddressType]<,[Timeout]><LF><CR>
AT+bledisconnect      =[]<LF><CR>
AT+bleconnectedpeers  =[]<LF><CR>
AT+blesetadvcfg       =[IntervalMin],[IntervalMax],[AdvType],[OwnAddrType],[ChannelMap]<,[FilterPolicy]><,[PeerAddrType],[PeerAddr]><,[PrimaryPhy],[SecondaryPhy]><LF><CR>
AT+blegetadvcfg       =[IntervalMin],[IntervalMax],[AdvType],[OwnAddrType],[ChannelMap],[FilterPolicy],[PeerAddrType],[PeerAddr],[PrimaryPhy],[SecondaryPhy]<LF><CR>
AT+bleadvstart        =[]<LF><CR>
AT+bleadvstop         =[]<LF><CR>
================================================================================<LF><CR>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:03:05.607 [TX] - at+bleinit=1
07-03-2026 19:03:05.620 [RX] - at+bleinit=1
07-03-2026 19:03:24.007 [TX] - at+clear<CR><LF>

07-03-2026 19:03:24.020 [RX] - at+clear<CR><LF>
<CR>
ERROR: Device not started,-1<CR><LF>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:04:50.658 [TX] - at+wlanstart
07-03-2026 19:04:50.675 [RX] - at+wlanstart
07-03-2026 19:04:59.633 [TX] - at+ate1<CR><LF>

07-03-2026 19:04:59.659 [RX] - at+ate1<CR><LF>
<CR>
ERROR: command does not exist,0<CR><LF>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: 
07-03-2026 19:05:02.593 [TX] - at+wlanstart
07-03-2026 19:05:02.605 [RX] - at+wlanstart
07-03-2026 19:05:03.632 [TX] - at+wlanstart
07-03-2026 19:05:03.642 [RX] - at+wlanstart
07-03-2026 19:05:48.745 [TX] - AT+wlanstart <CR><LF>

07-03-2026 19:05:48.758 [RX] - AT+wlanstart <CR><LF>
<CR>
ERROR: command does not exist,0<CR><LF>
<LF><CR>
user: <LF>
<LF><CR>
<LF><CR>
user: