EtherNet/IP ODVA Conformance Test Results

Test: ACD Behavior Test
Version: 2.5.9
TimeStamp: 2026-06-16T09:08:08.8035366+02:00
Elapsed Seconds: 790.5878352
Test Engineer:
Authentication: AuthenticationValid
Test Result: FAIL
Testware:
EtherNet/IP CT22-EN Single User License. Licensed to Pozzi, Massimo, ABB S.p.A. - SACE Division.

Test Step Description Result
InitializeRoutine PASS
|―0.1 - Enter Test Engineer Info PASS
|―0.2 - SelectIpAddress Ethernet: 192.168.1.1 PASS
|―0.2.1 - Configure Adapter Network adapter 'Intel(R) Ethernet Connection (18) I219-LM' on local host:192.168.1.1 PASS
|―0.3 - Load STC File am243x-lp_r5f_freertos_generic_device PASS
|―0.3.1 - Initialize Script With STC Values PASS
|――SUB5 - Initialize Script With STC Values PASS
|――――S5.1.0 - If DUT IP Address not configured PASS
|――――S5.1.2 - DUT IP Address 192.168.1.10 PASS
|――――S5.1.3 - DUT IP Address 192.168.1.10 Test Note
|――――S5.2.0 - If DUT MAC not configured PASS
|――――S5.2.2 - DUT MAC Address 70:FF:76:1E:F9:7D PASS
|――――S5.2.3 - DUT MAC 70:FF:76:1E:F9:7D Test Note
|――――S5.3 Assign Reset Timer PASS
|――――S5.4 Generate pcap Filter for Arp from DUT only with IP PASS
|――――S5.5 Generate pcap Filter for ARP or use of IP address from DUT PASS
|――――S5.6 Generate pcap Filter for ARP probe/announce only PASS
|――――S5.7 Generate pcap Filter for gratuitous ARP PASS
|――――S5.8 Configure Host IP Address 192.168.1.1 PASS
|――――S5.9 Generate pcap Filter for ARP from DUT with conflict address PASS
|――――S5.10 Assign Message Wait Time PASS
|――――S5.11 Copy media connect command PASS
|――――S5.11 Copy media connect args PASS
|―0.3.5 - Verify Test Setup PASS
|―0.4 - Device Capability PASS
|――SUB27 - Get Device Capability PASS
|――――ListIdentity PASS
|―――――192.168.1.10 LP-AM243 Generic Device
|――――List Identity - Search for DUT PASS
|―――――192.168.1.10 LP-AM243 Generic Device
|――――Check for Response PASS
|――――Check DUT Capability PASS
|――――Else PASS
|――――――Select Standard TCP False PASS
|――――Check DUT Profile PASS
|――――Else PASS
|――――――Select Standard Care PASS
|―0.5 - Register Session PASS
|――SUB3 - Register Session PASS
|――――S3.1 Register Session Try Loop PASS
|――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――S3.1.1 RegisterSession N/A
|――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――BreakStep PASS
|――――S3.2 Check for failed RegisterSession PASS
|―0.5 - Verify DUT is alive PASS
|―0.6 - Determine Port Configuration PASS
|――SUB12 - Identify Multiport Device PASS
|――――S12.2 Determine if DUT has multiple ports PASS
|――――S12.5 Active TCP/IP Object Instance 1 PASS
|――――S12.6 Number of Associated Ports 2 PASS
|―0.7 - Determine IP Configuration Method PASS
|――SUB18 - Determine IP Configuration Method PASS
|――――S18.1 - Get TCP/IP Attribute 3 0x00000000 PASS
|――――S18.2 - Get Configuration Method bits 0-3 00 PASS
|――――S18.3 - Is this static address? PASS
|――――――S18.3a - Static Address S18: DUT IP Configuration Method: STATIC VALUES Test Note
|――――――S18.3a.2 - Disable DHCP Steps Bypass PASS
|――――S18.3 - Else PASS
|―0.8 - Ensure DHCP Server is not running PASS
|―0.9 Ensure Second port not connected PASS
|――SUB26 - Disconnect Second Port PASS
|――――S26.1 - Is External Disconnect 2 Available? PASS
MainRoutine FAIL
|―1.0 Verify Default Values PASS
|―――1.0 Embed PCAP Message PASS
|――――SUB17 - Insert Message into PCAP Trace PASS
|――――――S17.0 OpenAdapter PASS
|――――――――S17.1 Embed message into PCAP Trace 1.0 Default Values PASS
|―――1.1 Get TCPIP Config Capability Attribute 0x95000000 PASS
|―――1.2 Mask ACD bit 7 of Config Capability 80 PASS
|―――1.3 Verify bit 7 is set - ACD Enabled. PASS
|―――1.4 Get TCPIP Object Revision 0x0400 PASS
|―――1.5 Verify Revision 4 PASS
|―――UnregisterSession 0x PASS
|―――1.6 Verify Type 1 Reset PASS
|――――SUB1 - Type 1 Reset behavior PASS
|――――――S1.1 Register Session PASS
|―――――――SUB3 - Register Session PASS
|―――――――――S3.1 Register Session Try Loop PASS
|―――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――BreakStep PASS
|―――――――――S3.2 Check for failed RegisterSession PASS
|――――――S1.1.1 Start DHCP Server PASS
|―――――――SUB19 - Start DHCP Server PASS
|――――――S1.2 Type 1 reset 0x N/A
|――――――S1.3 Is Type 1 Reset not supported? N/A
|――――――S1.4 Else PASS
|――――――――S1.4.0 - Ensure Device is Ready PASS
|―――――――――SUB23 - Reset Recovery Sequence PASS
|―――――――――――S23.1 - Is External Reset Recovery Available? PASS
|―――――――――――S23.3 - Else PASS
|―――――――――――――S23.2.1 - Ensure device is ready OK PASS
|――――――――S1.4.1 Register Session PASS
|―――――――――SUB3 - Register Session PASS
|―――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――BreakStep PASS
|―――――――――――S3.2 Check for failed RegisterSession PASS
|――――――――S1.4.1 Report IP Configuration Method (to ensure it hasn't changed) PASS
|―――――――――SUB18 - Determine IP Configuration Method PASS
|―――――――――――S18.1 - Get TCP/IP Attribute 3 0x00000000 PASS
|―――――――――――S18.2 - Get Configuration Method bits 0-3 00 PASS
|―――――――――――S18.3 - Is this static address? PASS
|―――――――――――――S18.3a - Static Address S18: DUT IP Configuration Method: STATIC VALUES Test Note
|―――――――――――――S18.3a.2 - Disable DHCP Steps Bypass PASS
|―――――――――――S18.3 - Else PASS
|――――――――S1.4.2 Get TCPIP Attribute 1 - Status 0x01000000 PASS
|――――――――S1.4.3 Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|――――――――S1.4.4 Verify Status bits 6 & 7 are zero PASS
|――――――――S1.4.5 Get TCPIP Attribute 10 - Select ACD 0x01 PASS
|――――――――S1.4.6 Verify Attribute 10 is 0x01 ACD Enabled PASS
|――――――――S1.4.7 Get TCPIP Attribute 11 - Last Conflict detected 0x0000000000000000000000000000000000000000000000000000000000000000000000 PASS
|――――――――S1.4.7 Verify Attribute 11 is 35 zero bytes PASS
|――――――S1.5 UnregisterSession 0x PASS
|――――――S1.6 Stop DHCP Server PASS
|―――――――SUB20 - Stop DHCP Server PASS
|―2.0 Attribute 10 Behavior Test PASS
|―――2.1 Attribute 10 delayed change, conflict still detected PASS
|―――――2.1.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 2.1 Attribute 10 Delayed Change PASS
|―――――Register Session PASS
|――――――SUB3 - Register Session PASS
|――――――――S3.1 Register Session Try Loop PASS
|――――――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――――――S3.1.1 RegisterSession N/A
|――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――――――BreakStep PASS
|――――――――S3.2 Check for failed RegisterSession PASS
|―――――2.1.1 Set SelectAcd = 00 0x PASS
|―――――UnregisterSession 0x PASS
|―――――DelayStep 200ms PASS
|―――――2.1.2 Generate a conflict PASS
|――――――SUB2 - Generate ARP Startup Conflict PASS
|――――――――S2.0 Open Adapter - Generate Conflict PASS
|――――――――――S2.1 Send First Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.2 Send Second Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.3 Send Third Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.4 Send Fourth Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.5 Send First Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 1880ms PASS
|――――――――――S2.6 Send Second Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 100ms PASS
|――――――――――S2.7 Send Conflict 000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――2.1.3 Verify LED Operation PASS
|――――――SUB22 - Verify LED Operation PASS
|――――――――S22.1 - Is External LED Verification Available? PASS
|――――――――S22.3 - Else PASS
|――――――――――S22 Verify LED Operation Yes PASS
|―――――2.1.4 Verify DUT doesn't respond PASS
|――――――SUB21 - Short RegisterSession PASS
|――――――――S21 - RegisterSession Test Status 0x 00 N/A
|――――――――S21 - Get Attribute Test Failed to send packet N/A
|――――――――S21 - UnregisterSession 0x N/A
|――――――――S21 - Verify Communication PASS
|―――2.2 Attribute 10, NV check and conflict not detected PASS
|―――――2.2.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 2.2 Attribute 10 NV Check PASS
|―――――Power Cycle PASS
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|――――――――S4.4 Wait for Startup? PASS
|――――――――――S4.4.1 Startup Delay 30000ms PASS
|――――――――――S4.4.1 Extra Delay 5000ms PASS
|――――――――――S4.4.2 Stop DHCP Server PASS
|―――――――――――SUB20 - Stop DHCP Server PASS
|―――――Register Session PASS
|――――――SUB3 - Register Session PASS
|――――――――S3.1 Register Session Try Loop PASS
|――――――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――――――S3.1.1 RegisterSession N/A
|――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――――――BreakStep PASS
|――――――――S3.2 Check for failed RegisterSession PASS
|―――――2.2.1 Get TCPIP Object Instance Attribute 1 0x01000000 PASS
|―――――2.2.2 Get TCPIP Object Instance Attribute 10 0x00 PASS
|―――――2.2.3 Get TCPIP Object Instance Attribute 11 0x0200216C123456000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――2.2.4 Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|―――――2.2.5 Verify Status bits 6 & 7 are zero PASS
|―――――2.2.6 Verify ACD Enable is off PASS
|―――――2.2.7 Verify Attribute 11 contains conflict data (not zeros) PASS
|―――――2.2.8 Generate a conflict PASS
|――――――SUB2 - Generate ARP Startup Conflict PASS
|――――――――S2.0 Open Adapter - Generate Conflict PASS
|――――――――――S2.1 Send First Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.2 Send Second Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.3 Send Third Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.4 Send Fourth Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.5 Send First Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 1880ms PASS
|――――――――――S2.6 Send Second Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 100ms PASS
|――――――――――S2.7 Send Conflict 000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――2.2.9 Try to communicate No response received. N/A
|―――――2.2.10 Does the DUT Still Respond with ACD off? PASS
|―――――――2.2.10.1 Notify that some form of ACD is used 2.2.10 Device implements some form of ACD when ACDEnable is off. This is allowable. Test Note
|―――――――2.2.10.2 Cycle Power to Restore Communication PASS
|――――――――SUB4 - Cycle Power PASS
|――――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――――S4.2 Power Off Command - External PASS
|――――――――――S4.3 Power Off - Internal PASS
|――――――――――――S4.3 Power Off PASS
|――――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――――SUB19 - Start DHCP Server PASS
|――――――――――S4.5 Settling Time - External PASS
|――――――――――S4.6 Settling Time - Internal PASS
|――――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――――S4.7 Power On Command - External PASS
|――――――――――S4.8 - Power On Internal PASS
|――――――――――――S4.9 Power On PASS
|――――――――――S4.4 Wait for Startup? PASS
|――――――――――――S4.4.1 Startup Delay 30000ms PASS
|――――――――――――S4.4.1 Extra Delay 5000ms PASS
|――――――――――――S4.4.2 Stop DHCP Server PASS
|―――――――――――――SUB20 - Stop DHCP Server PASS
|―――2.3 Attribute 10 reset behavior PASS
|―――――2.3.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 2.3 Attribute 10 reset behavior PASS
|―――――2.3 Verify Type 1 Reset PASS
|――――――SUB1 - Type 1 Reset behavior PASS
|――――――――S1.1 Register Session PASS
|―――――――――SUB3 - Register Session PASS
|―――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――BreakStep PASS
|―――――――――――S3.2 Check for failed RegisterSession PASS
|――――――――S1.1.1 Start DHCP Server PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S1.2 Type 1 reset 0x N/A
|――――――――S1.3 Is Type 1 Reset not supported? N/A
|――――――――S1.4 Else PASS
|――――――――――S1.4.0 - Ensure Device is Ready PASS
|―――――――――――SUB23 - Reset Recovery Sequence PASS
|―――――――――――――S23.1 - Is External Reset Recovery Available? PASS
|―――――――――――――S23.3 - Else PASS
|―――――――――――――――S23.2.1 - Ensure device is ready OK PASS
|――――――――――S1.4.1 Register Session PASS
|―――――――――――SUB3 - Register Session PASS
|―――――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――――BreakStep PASS
|―――――――――――――S3.2 Check for failed RegisterSession PASS
|――――――――――S1.4.1 Report IP Configuration Method (to ensure it hasn't changed) PASS
|―――――――――――SUB18 - Determine IP Configuration Method PASS
|―――――――――――――S18.1 - Get TCP/IP Attribute 3 0x00000000 PASS
|―――――――――――――S18.2 - Get Configuration Method bits 0-3 00 PASS
|―――――――――――――S18.3 - Is this static address? PASS
|―――――――――――――――S18.3a - Static Address S18: DUT IP Configuration Method: STATIC VALUES Test Note
|―――――――――――――――S18.3a.2 - Disable DHCP Steps Bypass PASS
|―――――――――――――S18.3 - Else PASS
|――――――――――S1.4.2 Get TCPIP Attribute 1 - Status 0x01000000 PASS
|――――――――――S1.4.3 Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|――――――――――S1.4.4 Verify Status bits 6 & 7 are zero PASS
|――――――――――S1.4.5 Get TCPIP Attribute 10 - Select ACD 0x01 PASS
|――――――――――S1.4.6 Verify Attribute 10 is 0x01 ACD Enabled PASS
|――――――――――S1.4.7 Get TCPIP Attribute 11 - Last Conflict detected 0x0000000000000000000000000000000000000000000000000000000000000000000000 PASS
|――――――――――S1.4.7 Verify Attribute 11 is 35 zero bytes PASS
|――――――――S1.5 UnregisterSession 0x PASS
|――――――――S1.6 Stop DHCP Server PASS
|―――――――――SUB20 - Stop DHCP Server PASS
|―3.1 & 3.2 Attribute 11 Conflict Record Verification - ACD Activity 02 or 03 FAIL
|―――3.1 Attribute 11 conflict record verification - ACD Activity 02 or 03 PASS
|―――――3.1.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.1 ACD Activity 02 or 03 PASS
|―――――3.1.1 Generate a conflict PASS
|――――――SUB2 - Generate ARP Startup Conflict PASS
|――――――――S2.0 Open Adapter - Generate Conflict PASS
|――――――――――S2.1 Send First Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.2 Send Second Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.3 Send Third Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.4 Send Fourth Conflict Probe 000108000604000100216C12345600000000000000000000C0A8010A PASS
|――――――――――DelayStep 120ms PASS
|――――――――――S2.5 Send First Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 1880ms PASS
|――――――――――S2.6 Send Second Announce 000108000604000100216C123456C0A8010A000000000000C0A80101 PASS
|――――――――――DelayStep 100ms PASS
|――――――――――S2.7 Send Conflict 000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――3.1.2 Verify LED Operation PASS
|――――――SUB22 - Verify LED Operation PASS
|――――――――S22.1 - Is External LED Verification Available? PASS
|――――――――S22.3 - Else PASS
|――――――――――S22 Verify LED Operation Yes PASS
|―――――3.1.3 Verify DUT Doesn't respond PASS
|――――――SUB21 - Short RegisterSession PASS
|――――――――S21 - RegisterSession Test Status 0x 00 N/A
|――――――――S21 - Get Attribute Test Failed to send packet N/A
|――――――――S21 - UnregisterSession 0x N/A
|――――――――S21 - Verify Communication PASS
|―――3.2 Attribute 1 and 11 conflict record verification - ACD Activity 02 or 03 FAIL
|―――――3.2.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.2 Attribute 1 & 11 Conflict Record Verification PASS
|―――――3.2.1 Verify AcdStatus Bit PASS
|――――――SUB7 - Verify AcdStatus Bit after conflict PASS
|――――――――S7.0 Enable DHCP support if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S7.1 Disconnect Media PASS
|―――――――――SUB24 - Disconnect Media PASS
|―――――――――――S24.1 - Is External Media Disconnect Available? PASS
|―――――――――――S24.4 - Else PASS
|―――――――――――――S24.5 - Unplug cable OK PASS
|――――――――S7.2 Connect Media PASS
|―――――――――SUB28 - Connect Media(2) PASS
|―――――――――――S28.1 - Is External Media Connect Available? PASS
|―――――――――――S28.4 - Else PASS
|―――――――――――――S28.5 - Plug cable OK PASS
|――――――――S7.3 RegisterSession - Don't expect success N/A
|―――――――――SUB3 - Register Session PASS
|―――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――BreakStep PASS
|――――――――S7.4 Get TCPIP status attribute 0x41000000 N/A
|――――――――S7.5 If able to communicate... PASS
|――――――――――S7.5.1 Get bit 6 ACD status 40 PASS
|――――――――――S7.5.2 Verify bit 6 ACD status is set indicating conflict PASS
|――――――――S7.6 Turn off DHCP Server PASS
|―――――――――SUB20 - Stop DHCP Server PASS
|―――――Power Cycle N/A
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|――――――――S4.4 Wait for Startup? PASS
|――――――――――S4.4.1 Startup Delay 30000ms PASS
|――――――――――S4.4.1 Extra Delay 5000ms PASS
|――――――――――S4.4.2 Stop DHCP Server PASS
|―――――――――――SUB20 - Stop DHCP Server PASS
|―――――Register Session PASS
|――――――SUB3 - Register Session PASS
|――――――――S3.1 Register Session Try Loop PASS
|――――――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――――――S3.1.1 RegisterSession N/A
|――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――――――BreakStep PASS
|――――――――S3.2 Check for failed RegisterSession PASS
|―――――3.2.2 Verify Last Conflict Detected PASS
|――――――SUB8 - Verify Last Conflict Detected PASS
|――――――――S8.1 - Get TCPIP Attribute 11 Last Conflict Detected 0x0200216C123456000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|――――――――S8.2 - Get AcdActivity Byte 02 PASS
|――――――――S8.4 - Verify AcdActivity is 02 PASS
|――――――――S8.5 - Get Remote MAC 00216C123456 PASS
|――――――――S8.6 - Verify Remote MAC PASS
|――――――――S8.7 - Get ARP PDU 000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――3.2.3 Verify Arp Pdu matches what we sent FAIL
|―――――――SetFail 3.2.3 LastConflictDeteced: ARP PDU does not match conflict PDU FAIL
|―――――3.2.4 Verify AcdStatus cleared PASS
|――――――SUB9 - Verify Status bits cleared PASS
|――――――――S9.1 - Get TCPIP Attribute 1 0x01000000 PASS
|――――――――S9.2 - Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|――――――――S9.3 - Verify Status bits 6 & 7 are zero PASS
|―3.3 Attribute 11 set test PASS
|―――3.3.0 Embed PCAP Message PASS
|――――SUB17 - Insert Message into PCAP Trace PASS
|――――――S17.0 OpenAdapter PASS
|――――――――S17.1 Embed message into PCAP Trace 3.3.0 Attribute 11 Set Test PASS
|―――3.3.1 Set Attribute 11 to 34 zeros Status 0x0013 N/A
|―――3.3.1 Verify Status 0x13 PASS
|―――3.3.2 Set Attribute 11 to 36 zeros Status 0x0015 N/A
|―――3.3.2 Verify Status 0x15 PASS
|―――3.3.3 Set Attribute 11 to 34 zeros plus one FF Status 0x009 N/A
|―――3.3.3 Verify Status 0x09 PASS
|―――3.3.4 Set Attribute 11 to one FF plus 34 zeros Status 0x009 N/A
|―――3.3.4 Verify Status 0x09 PASS
|―――3.3.5 Set Attribute 11 to 35 zeros 0x PASS
|―――3.3.5 Get Attribute 11 0x0000000000000000000000000000000000000000000000000000000000000000000000 PASS
|―――3.3.5 Verify Attribute 11 is 35 zero bytes PASS
|―3.4 & 3.5 Attribute 11 Conflict Record Verification - ACD Activity 01 FAIL
|―――3.4 Attribute 11 conflict record verification - ACD Activity 01 (ARP Response conflict) FAIL
|―――――3.4.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.4 ACD Activity 01 PASS
|―――――Power Cycle N/A
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|―――――3.4 OpenAdapter FAIL
|―――――――3.4.1 Start Acquisition PASS
|―――――――3.4.2 Wait for Initial Probe Timed out waiting for messages. FAIL
|―――――――3.4.3 Send ARP Response Conflict 000108000604000200216C123456C0A8010A70FF761EF97D00000000 PASS
|―――――――3.4.3.1 Stop DHCP Server PASS
|――――――――SUB20 - Stop DHCP Server PASS
|―――――――3.4.4 CompleteAcquisition Timed out waiting for packets FAIL
|―――――3.4.2 Verify LED Operation PASS
|――――――SUB22 - Verify LED Operation PASS
|――――――――S22.1 - Is External LED Verification Available? PASS
|――――――――S22.3 - Else PASS
|――――――――――S22 Verify LED Operation Yes PASS
|―――――3.4.3 Verify DUT Doesn't respond PASS
|――――――SUB21 - Short RegisterSession PASS
|――――――――S21 - RegisterSession Test Status 0x 00 N/A
|――――――――S21 - Get Attribute Test Failed to send packet N/A
|――――――――S21 - UnregisterSession 0x N/A
|――――――――S21 - Verify Communication PASS
|―――3.5 Attribute 11 conflict record verification - ACD Activity 01 (Continued) FAIL
|―――――3.5.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.5 Conflict Record Verification ACD Activity 01 PASS
|―――――3.5.1 Verify AcdStatus Bit FAIL
|――――――SUB7 - Verify AcdStatus Bit after conflict FAIL
|――――――――S7.0 Enable DHCP support if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S7.1 Disconnect Media PASS
|―――――――――SUB24 - Disconnect Media PASS
|―――――――――――S24.1 - Is External Media Disconnect Available? PASS
|―――――――――――S24.4 - Else PASS
|―――――――――――――S24.5 - Unplug cable OK PASS
|――――――――S7.2 Connect Media PASS
|―――――――――SUB28 - Connect Media(2) PASS
|―――――――――――S28.1 - Is External Media Connect Available? PASS
|―――――――――――S28.4 - Else PASS
|―――――――――――――S28.5 - Plug cable OK PASS
|――――――――S7.3 RegisterSession - Don't expect success N/A
|―――――――――SUB3 - Register Session PASS
|―――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――BreakStep PASS
|――――――――S7.4 Get TCPIP status attribute 0x01000000 N/A
|――――――――S7.5 If able to communicate... FAIL
|――――――――――S7.5.1 Get bit 6 ACD status 00 PASS
|――――――――――S7.5.2 Verify bit 6 ACD status is set indicating conflict FAIL
|――――――――――――SetFail Bit 6 of TCPIP status (AcdStatus) is not set. FAIL
|――――――――S7.6 Turn off DHCP Server PASS
|―――――――――SUB20 - Stop DHCP Server PASS
|―――――Power Cycle N/A
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|――――――――S4.4 Wait for Startup? PASS
|――――――――――S4.4.1 Startup Delay 30000ms PASS
|――――――――――S4.4.1 Extra Delay 5000ms PASS
|――――――――――S4.4.2 Stop DHCP Server PASS
|―――――――――――SUB20 - Stop DHCP Server PASS
|―――――Register Session PASS
|――――――SUB3 - Register Session PASS
|――――――――S3.1 Register Session Try Loop PASS
|――――――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――――――S3.1.1 RegisterSession N/A
|――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――――――BreakStep PASS
|――――――――S3.2 Check for failed RegisterSession PASS
|―――――3.5.2 Verify Last Conflict Detected FAIL
|――――――SUB8 - Verify Last Conflict Detected FAIL
|――――――――S8.1 - Get TCPIP Attribute 11 Last Conflict Detected 0x0000000000000000000000000000000000000000000000000000000000000000000000 PASS
|――――――――S8.2 - Get AcdActivity Byte 00 PASS
|――――――――S8.3 - Verify AcdActivity is 01 FAIL
|――――――――――SetFail LastConflictDetected: AcdActivity must be 01. FAIL
|――――――――S8.5 - Get Remote MAC 000000000000 PASS
|――――――――S8.6 - Verify Remote MAC FAIL
|――――――――――SetFail LastConflictDetected: Remote MAC does not match conflict address FAIL
|――――――――S8.7 - Get ARP PDU 00000000000000000000000000000000000000000000000000000000 PASS
|―――――3.5.3 Verify Arp Pdu matches what we sent FAIL
|―――――――SetFail 3.5.3 LastConflictDeteced: ARP PDU does not match conflict PDU FAIL
|―――――3.5.4 Verify AcdStatus cleared PASS
|――――――SUB9 - Verify Status bits cleared PASS
|――――――――S9.1 - Get TCPIP Attribute 1 0x01000000 PASS
|――――――――S9.2 - Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|――――――――S9.3 - Verify Status bits 6 & 7 are zero PASS
|―3.6 Attribute 11 reset via Type 1 Reset service to the Identity object PASS
|―――3.6.0 Embed PCAP Message PASS
|――――SUB17 - Insert Message into PCAP Trace PASS
|――――――S17.0 OpenAdapter PASS
|――――――――S17.1 Embed message into PCAP Trace 3.6 Attribute 11 reset. PASS
|―――3.6.1 Simple reset PASS
|――――SUB6 - Manual Type 1 Reset PASS
|――――――S6.1 Set TCPIP Attribute 10 to 0x01 ACD Enabled 0x PASS
|――――――S6.2 Set TCPIP Attribute 11 Last Conflict Detected to all zeros 0x PASS
|――――――S6.3 Cycle Power. PASS
|―――――――SUB4 - Cycle Power PASS
|―――――――――S4.1 Ensure session is unregistered 0x N/A
|―――――――――S4.2 Power Off Command - External PASS
|―――――――――S4.3 Power Off - Internal PASS
|―――――――――――S4.3 Power Off PASS
|―――――――――S4.4 Turn on DHCP Server, if needed PASS
|――――――――――SUB19 - Start DHCP Server PASS
|―――――――――S4.5 Settling Time - External PASS
|―――――――――S4.6 Settling Time - Internal PASS
|―――――――――――S4.6.1 Power Off Settling Time PASS
|―――――――――S4.7 Power On Command - External PASS
|―――――――――S4.8 - Power On Internal PASS
|―――――――――――S4.9 Power On PASS
|―――――――――S4.4 Wait for Startup? PASS
|―――――――――――S4.4.1 Startup Delay 30000ms PASS
|―――――――――――S4.4.1 Extra Delay 5000ms PASS
|―――――――――――S4.4.2 Stop DHCP Server PASS
|――――――――――――SUB20 - Stop DHCP Server PASS
|―3.7 & 3.8 Attribute 11 Conflict Record Verification - ACD Activity 01 FAIL
|―――3.7 Attribute 11 conflict record verification - ACD Activity 01 (ARP announce conflict) FAIL
|―――――3.7.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.7 ACD Activity 01 PASS
|―――――Power Cycle N/A
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|―――――3.7 OpenAdapter FAIL
|―――――――3.7.1 Start Acquisition PASS
|―――――――3.7.2 Wait for Initial Probe Timed out waiting for messages. FAIL
|―――――――3.7.3 Send a conflicting ARP announce 000108000604000100216C123456C0A8010A000000000000C0A8010A PASS
|―――――――3.7.3.1 Stop DHCP Server PASS
|――――――――SUB20 - Stop DHCP Server PASS
|―――――――3.7.4 CompleteAcquisition Timed out waiting for packets FAIL
|―――――3.7.5 Verify LED Operation PASS
|――――――SUB22 - Verify LED Operation PASS
|――――――――S22.1 - Is External LED Verification Available? PASS
|――――――――S22.3 - Else PASS
|――――――――――S22 Verify LED Operation Yes PASS
|―――――3.7.6 Verify DUT doesn't respond PASS
|――――――SUB21 - Short RegisterSession PASS
|――――――――S21 - RegisterSession Test Status 0x 00 N/A
|――――――――S21 - Get Attribute Test Failed to send packet N/A
|――――――――S21 - UnregisterSession 0x N/A
|――――――――S21 - Verify Communication PASS
|―――3.8 Attribute 1 and 11 conflict record verification - ACD Activity 01 FAIL
|―――――3.8.0 Embed PCAP Message PASS
|――――――SUB17 - Insert Message into PCAP Trace PASS
|――――――――S17.0 OpenAdapter PASS
|――――――――――S17.1 Embed message into PCAP Trace 3.8 Attribute 1 & 11 Conflict Record Verification PASS
|―――――3.8.1 Verify AcdStatus Bit FAIL
|――――――SUB7 - Verify AcdStatus Bit after conflict FAIL
|――――――――S7.0 Enable DHCP support if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S7.1 Disconnect Media PASS
|―――――――――SUB24 - Disconnect Media PASS
|―――――――――――S24.1 - Is External Media Disconnect Available? PASS
|―――――――――――S24.4 - Else PASS
|―――――――――――――S24.5 - Unplug cable OK PASS
|――――――――S7.2 Connect Media PASS
|―――――――――SUB28 - Connect Media(2) PASS
|―――――――――――S28.1 - Is External Media Connect Available? PASS
|―――――――――――S28.4 - Else PASS
|―――――――――――――S28.5 - Plug cable OK PASS
|――――――――S7.3 RegisterSession - Don't expect success N/A
|―――――――――SUB3 - Register Session PASS
|―――――――――――S3.1 Register Session Try Loop PASS
|―――――――――――――S3.1 Register Session Try Loop[1] SKIP
|―――――――――――――――S3.1.1 RegisterSession N/A
|―――――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|―――――――――――――――――BreakStep PASS
|――――――――S7.4 Get TCPIP status attribute 0x01000000 N/A
|――――――――S7.5 If able to communicate... FAIL
|――――――――――S7.5.1 Get bit 6 ACD status 00 PASS
|――――――――――S7.5.2 Verify bit 6 ACD status is set indicating conflict FAIL
|――――――――――――SetFail Bit 6 of TCPIP status (AcdStatus) is not set. FAIL
|――――――――S7.6 Turn off DHCP Server PASS
|―――――――――SUB20 - Stop DHCP Server PASS
|―――――Power Cycle N/A
|――――――SUB4 - Cycle Power PASS
|――――――――S4.1 Ensure session is unregistered 0x N/A
|――――――――S4.2 Power Off Command - External PASS
|――――――――S4.3 Power Off - Internal PASS
|――――――――――S4.3 Power Off PASS
|――――――――S4.4 Turn on DHCP Server, if needed PASS
|―――――――――SUB19 - Start DHCP Server PASS
|――――――――S4.5 Settling Time - External PASS
|――――――――S4.6 Settling Time - Internal PASS
|――――――――――S4.6.1 Power Off Settling Time PASS
|――――――――S4.7 Power On Command - External PASS
|――――――――S4.8 - Power On Internal PASS
|――――――――――S4.9 Power On PASS
|――――――――S4.4 Wait for Startup? PASS
|――――――――――S4.4.1 Startup Delay 30000ms PASS
|――――――――――S4.4.1 Extra Delay 5000ms PASS
|――――――――――S4.4.2 Stop DHCP Server PASS
|―――――――――――SUB20 - Stop DHCP Server PASS
|―――――Register Session PASS
|――――――SUB3 - Register Session PASS
|――――――――S3.1 Register Session Try Loop PASS
|――――――――――S3.1 Register Session Try Loop[1] SKIP
|――――――――――――S3.1.1 RegisterSession N/A
|――――――――――――S3.1.2 Break out of loop if RegisterSession succeeded PASS
|――――――――――――――BreakStep PASS
|――――――――S3.2 Check for failed RegisterSession PASS
|―――――3.8.2 Verify Last Conflict Detected FAIL
|――――――SUB8 - Verify Last Conflict Detected FAIL
|――――――――S8.1 - Get TCPIP Attribute 11 Last Conflict Detected 0x0000000000000000000000000000000000000000000000000000000000000000000000 PASS
|――――――――S8.2 - Get AcdActivity Byte 00 PASS
|――――――――S8.3 - Verify AcdActivity is 01 FAIL
|――――――――――SetFail LastConflictDetected: AcdActivity must be 01. FAIL
|――――――――S8.5 - Get Remote MAC 000000000000 PASS
|――――――――S8.6 - Verify Remote MAC FAIL
|――――――――――SetFail LastConflictDetected: Remote MAC does not match conflict address FAIL
|――――――――S8.7 - Get ARP PDU 00000000000000000000000000000000000000000000000000000000 PASS
|―――――3.8.3 Verify Arp Pdu matches what we sent FAIL
|―――――――SetFail 3.8.3 LastConflictDeteced: ARP PDU does not match conflict PDU FAIL
|―――――3.8.4 Verify AcdStatus cleared PASS
|――――――SUB9 - Verify Status bits cleared PASS
|――――――――S9.1 - Get TCPIP Attribute 1 0x01000000 PASS
|――――――――S9.2 - Mask bit 6 & bit 7 of Status Attribute 0000 PASS
|――――――――S9.3 - Verify Status bits 6 & 7 are zero PASS
|―3.9 Attribute 11 reset via Type 1 Reset service to the Identity object PASS
|―――3.9.0 Embed PCAP Message PASS
|――――SUB17 - Insert Message into PCAP Trace PASS
|――――――S17.0 OpenAdapter PASS
|――――――――S17.1 Embed message into PCAP Trace 3.9 Attribute 11 reset PASS
|―――3.9.1 Simple reset PASS
|――――SUB6 - Manual Type 1 Reset PASS
|――――――S6.1 Set TCPIP Attribute 10 to 0x01 ACD Enabled 0x PASS
|――――――S6.2 Set TCPIP Attribute 11 Last Conflict Detected to all zeros 0x PASS
|――――――S6.3 Cycle Power. PASS
|―――――――SUB4 - Cycle Power PASS
|―――――――――S4.1 Ensure session is unregistered 0x N/A
|―――――――――S4.2 Power Off Command - External PASS
|―――――――――S4.3 Power Off - Internal PASS
|―――――――――――S4.3 Power Off PASS
|―――――――――S4.4 Turn on DHCP Server, if needed PASS
|――――――――――SUB19 - Start DHCP Server PASS
|―――――――――S4.5 Settling Time - External PASS
|―――――――――S4.6 Settling Time - Internal PASS
|―――――――――――S4.6.1 Power Off Settling Time PASS
|―――――――――S4.7 Power On Command - External PASS
|―――――――――S4.8 - Power On Internal PASS
|―――――――――――S4.9 Power On PASS
|―――――――――S4.4 Wait for Startup? PASS
|―――――――――――S4.4.1 Startup Delay 30000ms PASS
|―――――――――――S4.4.1 Extra Delay 5000ms PASS
|―――――――――――S4.4.2 Stop DHCP Server PASS
|――――――――――――SUB20 - Stop DHCP Server PASS
|―4.1 No IP Frames Sent Until Address Successfully Probed *** SKIPPED *** SKIP
|―4.2 ACD Probe Timing and ACD Announce Timing *** SKIPPED *** SKIP
|―4.3 ACD Process Restarted When Cable Reconnected *** SKIPPED *** SKIP
|―4.4 Ongoing ACD Probe Timing (10 minutes) *** SKIPPED *** SKIP
|―4.5 Semi-Active State For Multi-Port Devices *** SKIPPED *** SKIP
|―4.6 Multi-Port Devices Restart ACD Process on Link Up *** SKIPPED *** SKIP
|―4.7 Conflict Detection During Probe Phase - ARP Announce *** SKIPPED *** SKIP
|―4.8 Conflict Dection After Probe Phase *** SKIPPED *** SKIP
|―4.9 Verify LastConflictDetected Attribute *** SKIPPED *** SKIP
|―4.10 Conflict Isn't Detected Between Announce Frames *** SKIPPED *** SKIP
|―4.11 ACD Defend *** SKIPPED *** SKIP
|―4.12 Conflict After Successful Address Probe *** SKIPPED *** SKIP
|―4.13 Address Not Used When Conflict is Declared *** SKIPPED *** SKIP
|―4.14 Directed ARP During Probe Phase Does Not Cause Conflict *** SKIPPED *** SKIP
|―4.15 Directed ARP Response In Ongoing Detection *** SKIPPED *** SKIP
|―4.16 Conflict Detection During Probe Phase - ARP Probe *** SKIPPED *** SKIP
FinallyRoutine PASS
|―FI - Final Power cycle DUT. PASS
|――SUB4 - Cycle Power PASS
|――――S4.1 Ensure session is unregistered 0x N/A
|――――S4.2 Power Off Command - External PASS
|――――S4.3 Power Off - Internal PASS
|――――――S4.3 Power Off PASS
|――――S4.4 Turn on DHCP Server, if needed PASS
|―――――SUB19 - Start DHCP Server PASS
|――――S4.5 Settling Time - External PASS
|――――S4.6 Settling Time - Internal PASS
|――――――S4.6.1 Power Off Settling Time PASS
|――――S4.7 Power On Command - External PASS
|――――S4.8 - Power On Internal PASS
|――――――S4.9 Power On PASS