/* * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ * * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /****************************************************************************** * user.h - CC31xx/CC32xx Host Driver Implementation ******************************************************************************/ #ifndef __USER_H__ #define __USER_H__ #ifdef __cplusplus extern "C" { #endif #include #include typedef signed int _SlFd_t; #ifdef DeviceFamily_CC26X2 #define SL_TIMESTAMP_TICKS_IN_10_MILLISECONDS (_u32)(1000) #else #define SL_TIMESTAMP_TICKS_IN_10_MILLISECONDS (_u32)(10) #endif #define SL_TIMESTAMP_MAX_VALUE (_u32)(0xFFFFFFFF) #define SYNC_PATTERN_TIMEOUT_IN_MSEC (_u32)(60000) /*! ****************************************************************************** \defgroup configuration_mem_mgm Configuration - Memory Management This section declare in which memory management model the SimpleLink driver will run: -# Static -# Dynamic This section IS NOT REQUIRED in case Static model is selected. The default memory model is Static @{ ***************************************************************************** */ /*! \brief Defines whether the SimpleLink driver is working in dynamic memory model or not When defined, the SimpleLink driver use dynamic allocations if dynamic allocation is selected malloc and free functions must be retrieved \sa \note belongs to \ref configuration_sec \warning */ //#define SL_MEMORY_MGMT_DYNAMIC #ifdef SL_MEMORY_MGMT_DYNAMIC #include /*! \brief \sa \note belongs to \ref configuration_sec \warning */ #define sl_Malloc(Size) malloc(Size) /*! \brief \sa \note belongs to \ref configuration_sec \warning */ #define sl_Free(pMem) free(pMem) #endif /*! Close the Doxygen group. @} */ /*! \def MAX_CONCURRENT_ACTIONS \brief Defines the maximum number of concurrent action in the system Min:1 , Max: 32 Actions which has async events as return, will be blocked until the event arrive \sa \note In case there are not enough resources for the actions needed in the system, error is received: SL_POOL_IS_EMPTY one option is to increase MAX_CONCURRENT_ACTIONS (improves performance but results in memory consumption) Other option is to call the API later (decrease performance) Async events which arrive during command context will be dynamically or static allocated and handled in spawn context. If MAX_CONCURRENT_ACTIONS is high, there will be more events which might arrive during this period. Due to memory constrains MAX_CONCURRENT_ACTIONS is lower in static allocation mode. \warning In case of setting to one, recommend to use non-blocking recv\recvfrom to allow multiple socket recv */ #ifdef SL_MEMORY_MGMT_DYNAMIC #define MAX_CONCURRENT_ACTIONS 18 #else #define MAX_CONCURRENT_ACTIONS 5 #endif /*! \def SL_MAX_ASYNC_BUFFERS \brief Defines the maximum static buffers to store asycn events which arrives during command context. The event is stored in a buffer (if free) and handle in spwan cotext. value must be set to MAX_CONCURRENT_ACTIONS which is the maximum simultaniuos async event which could arrive in command context. value: MAX_CONCURRENT_ACTIONS \sa \note Events which arrive when there is no free buffer will be dropped. If there is a command which is waiting on this event, it will be released with error SL_RET_CODE_NO_FREE_ASYNC_BUFFERS_ERROR. In this case need to increase MAX_CONCURRENT_ACTIONS (improves performance but results in memory consumption) */ #define SL_MAX_ASYNC_BUFFERS MAX_CONCURRENT_ACTIONS /*! \def CPU_FREQ_IN_MHZ \brief Defines CPU frequency for Host side, for better accuracy of busy loops, if any \sa \note \warning If not set the default CPU frequency is set to 200MHz This option will be deprecated in future release */ /* #define CPU_FREQ_IN_MHZ 80 */ /*! ****************************************************************************** \defgroup configuration_capabilities Configuration - Capabilities Set This section IS NOT REQUIRED in case one of the following pre defined capabilities set is in use: - SL_TINY - SL_SMALL - SL_FULL PORTING ACTION: - Define one of the pre-defined capabilities set or uncomment the relevant definitions below to select the required capabilities @{ ******************************************************************************* */ /*! \def SL_RUNTIME_EVENT_REGISTERATION \brief Defines whether the SimpleLink driver uses dynamic event registration or static precompiled event mechanism \sa \note belongs to \ref configuration_sec */ #define SL_RUNTIME_EVENT_REGISTERATION /*! \def SL_INC_ARG_CHECK \brief Defines whether the SimpleLink driver perform argument check or not When defined, the SimpleLink driver perform argument check on function call. Removing this define could reduce some code size and improve slightly the performances but may impact in unpredictable behavior in case of invalid arguments \sa \note belongs to \ref configuration_sec \warning Removing argument check may cause unpredictable behavior in case of invalid arguments. In this case the user is responsible to argument validity (for example all handlers must not be NULL) */ #define SL_INC_ARG_CHECK /*! \brief Defines whether to include extended API in SimpleLink driver or not When defined, the SimpleLink driver will include also all exteded API of the included packages \sa ext_api \note belongs to \ref configuration_sec \warning */ #define SL_INC_EXT_API /*! \brief Defines whether to include WLAN package in SimpleLink driver or not When defined, the SimpleLink driver will include also the WLAN package \sa \note belongs to \ref configuration_sec \warning */ #define SL_INC_WLAN_PKG /*! \brief Defines whether to include SOCKET package in SimpleLink driver or not When defined, the SimpleLink driver will include also the SOCKET package \sa \note belongs to \ref configuration_sec \warning */ #define SL_INC_SOCKET_PKG /*! \brief Defines whether to include NET_APP package in SimpleLink driver or not When defined, the SimpleLink driver will include also the NET_APP package \sa \note belongs to \ref configuration_sec \warning */ #define SL_INC_NET_APP_PKG /*! \brief Defines whether to include NET_CFG package in SimpleLink driver or not When defined, the SimpleLink driver will include also the NET_CFG package \sa \note belongs to \ref configuration_sec \warning */ #define SL_INC_NET_CFG_PKG /*! \brief Defines whether to include NVMEM package in SimpleLink driver or not When defined, the SimpleLink driver will include also the NVMEM package \sa \note belongs to \ref configuration_sec \warning */ #define SL_INC_NVMEM_PKG /*! \brief Defines whether to include NVMEM extended package in SimpleLink driver or not When defined, the SimpleLink driver will include also the NVMEM extended package \sa \note belongs to \ref nvmem_ext \warning */ #define SL_INC_NVMEM_EXT_PKG /*! \brief Defines whether to include socket server side APIs in SimpleLink driver or not When defined, the SimpleLink driver will include also socket server side APIs \sa server_side \note \warning */ #define SL_INC_SOCK_SERVER_SIDE_API /*! \brief Defines whether to include socket client side APIs in SimpleLink driver or not When defined, the SimpleLink driver will include also socket client side APIs \sa client_side \note belongs to \ref configuration_sec \warning */ #define SL_INC_SOCK_CLIENT_SIDE_API /*! \brief Defines whether to include socket receive APIs in SimpleLink driver or not When defined, the SimpleLink driver will include also socket receive side APIs \sa recv_api \note belongs to \ref configuration_sec \warning */ #define SL_INC_SOCK_RECV_API /*! \brief Defines whether to include socket send APIs in SimpleLink driver or not When defined, the SimpleLink driver will include also socket send side APIs \sa send_api \note belongs to \ref configuration_sec \warning */ #define SL_INC_SOCK_SEND_API /*! Close the Doxygen group. @} */ /*! ****************************************************************************** \defgroup configuration_enable_device Configuration - Device Enable/Disable The enable/disable API provide mechanism to enable/disable the network processor porting ACTION: - None @{ ****************************************************************************** */ /*! \brief Preamble to the enabling the Network Processor. Placeholder to implement any pre-process operations before enabling networking operations. \sa sl_DeviceEnable \note belongs to \ref configuration_sec */ #define sl_DeviceEnablePreamble() NwpPowerOnPreamble() /*! \brief Enable the Network Processor \sa sl_DeviceDisable \note belongs to \ref configuration_sec */ #define sl_DeviceEnable() NwpPowerOn() /*! \brief Disable the Network Processor \sa sl_DeviceEnable \note belongs to \ref configuration_sec */ #define sl_DeviceDisable() NwpPowerOff() /*! Close the Doxygen group. @} */ /*! ****************************************************************************** \defgroup configuration_interface Configuration - Communication Interface The SimpleLink device supports several standard communication protocol among SPI and UART. CC32XX Host Driver implements SPI Communication Interface \note In CC32XX, SPI implementation uses DMA in order to increase the utilization of the communication channel. If user prefers to user UART, these interfaces need to be redefined porting ACTION: - None @{ ****************************************************************************** */ #define _SlFd_t Fd_t /*! \brief Opens an interface communication port to be used for communicating with a SimpleLink device Given an interface name and option flags, this function opens the communication port and creates a file descriptor. This file descriptor is used afterwards to read and write data from and to this specific communication channel. The speed, clock polarity, clock phase, chip select and all other specific attributes of the channel are all should be set to hardcoded in this function. \param ifName - points to the interface name/path. The interface name is an optional attributes that the SimpleLink driver receives on opening the driver (sl_Start). In systems that the spi channel is not implemented as part of the os device drivers, this parameter could be NULL. \param flags - optional flags parameters for future use \return upon successful completion, the function shall open the channel and return a non-negative integer representing the file descriptor. Otherwise, -1 shall be returned \sa sl_IfClose , sl_IfRead , sl_IfWrite \note The prototype of the function is as follow: Fd_t xxx_IfOpen(char* pIfName , unsigned long flags); \note belongs to \ref configuration_sec \warning */ #define sl_IfOpen spi_Open /*! \brief Closes an opened interface communication port \param fd - file descriptor of opened communication channel \return upon successful completion, the function shall return 0. Otherwise, -1 shall be returned \sa sl_IfOpen , sl_IfRead , sl_IfWrite \note The prototype of the function is as follow: int xxx_IfClose(Fd_t Fd); \note belongs to \ref configuration_sec \warning */ #define sl_IfClose spi_Close /*! \brief Attempts to read up to len bytes from an opened communication channel into a buffer starting at pBuff. \param fd - file descriptor of an opened communication channel \param pBuff - pointer to the first location of a buffer that contains enough space for all expected data \param len - number of bytes to read from the communication channel \return upon successful completion, the function shall return the number of read bytes. Otherwise, 0 shall be returned \sa sl_IfClose , sl_IfOpen , sl_IfWrite \note The prototype of the function is as follow: int xxx_IfRead(Fd_t Fd , char* pBuff , int Len); \note belongs to \ref configuration_sec \warning */ #define sl_IfRead spi_Read /*! \brief attempts to write up to len bytes to the SPI channel \param fd - file descriptor of an opened communication channel \param pBuff - pointer to the first location of a buffer that contains the data to send over the communication channel \param len - number of bytes to write to the communication channel \return upon successful completion, the function shall return the number of sent bytes. therwise, 0 shall be returned \sa sl_IfClose , sl_IfOpen , sl_IfRead \note This function could be implemented as zero copy and return only upon successful completion of writing the whole buffer, but in cases that memory allocation is not too tight, the function could copy the data to internal buffer, return back and complete the write in parallel to other activities as long as the other SPI activities would be blocked until the entire buffer write would be completed The prototype of the function is as follow: int xxx_IfWrite(Fd_t Fd , char* pBuff , int Len); \note belongs to \ref configuration_sec \warning */ #define sl_IfWrite spi_Write /*! \brief register an interrupt handler routine for the host IRQ \param InterruptHdl - pointer to interrupt handler routine \param pValue - pointer to a memory structure that is passed to the interrupt handler. \return upon successful registration, the function shall return 0. Otherwise, -1 shall be returned \sa \note If there is already registered interrupt handler, the function should overwrite the old handler with the new one \note If the handler is a null pointer, the function should un-register the interrupt handler, and the interrupts can be disabled. \note belongs to \ref configuration_sec \warning */ #define sl_IfRegIntHdlr(InterruptHdl, \ pValue) NwpRegisterInterruptHandler( \ InterruptHdl, pValue) /*! \brief Masks the Host IRQ \sa sl_IfUnMaskIntHdlr \note belongs to \ref configuration_sec \warning */ #define sl_IfMaskIntHdlr() \ NwpMaskInterrupt() /*! \brief Unmasks the Host IRQ \sa sl_IfMaskIntHdlr \note belongs to \ref configuration_sec \warning */ #define sl_IfUnMaskIntHdlr() \ NwpUnMaskInterrupt() /*! \brief Write Handers for statistics debug on write \param interface handler - pointer to interrupt handler routine \return no return value \sa \note An optional hooks for monitoring before and after write info \note belongs to \ref configuration_sec \warning */ /* #define SL_START_WRITE_STAT */ #ifdef SL_START_WRITE_STAT #define sl_IfStartWriteSequence #define sl_IfEndWriteSequence #endif /*! \brief Get the timer counter value (timestamp). The timer must count from zero to its MAX value. \param None. \return Returns 32-bit timer counter value (ticks unit) \sa \note \note belongs to \ref porting_sec \warning */ #undef slcb_GetTimestamp /* A timer must be started before using this function */ #define slcb_GetTimestamp TimerGetCurrentTimestamp /*! \brief This macro wait for the NWP to raise a ready for shutdown indication. \param None. \note This function is unique for the CC32XX family \warning */ #define WAIT_NWP_SHUTDOWN_READY /*! Close the Doxygen group. @} */ /*! ****************************************************************************** \defgroup configuration_os Configuration - Operating System The SimpleLink driver could run on two kind of platforms: -# Non-Os / Single Threaded (default) -# Multi-Threaded CC32XX SimpleLink Host Driver is ported on both Non-Os and Multi Threaded OS enviroment. The Host driver is made OS independent by implementing an OS Abstraction layer. Reference implementation for OS Abstraction is available for FreeRTOS and TI-RTOS. If you choose to work in multi-threaded environment under different operating system you will have to provide some basic adaptation routines to allow the driver to protect access to resources for different threads (locking object) and to allow synchronization between threads (sync objects). In additional the driver support running without dedicated thread allocated solely to the SimpleLink driver. If you choose to work in this mode, you should also supply a spawn method that will enable to run function on a temporary context. \note - This Macro is defined in the IDE to generate Driver for both OS and Non-OS porting ACTION: - None @{ ****************************************************************************** */ #define SL_PLATFORM_MULTI_THREADED #ifdef SL_PLATFORM_MULTI_THREADED /*! \brief \sa \note belongs to \ref configuration_sec \warning */ #define SL_OS_RET_CODE_OK ((int)OS_OK) /*! \brief \sa \note belongs to \ref configuration_sec \warning */ #define SL_OS_WAIT_FOREVER ((uint32_t)OS_WAIT_FOREVER) /*! \brief \sa \note belongs to \ref configuration_sec \warning */ #define SL_OS_NO_WAIT ((uint32_t)OS_NO_WAIT) /*! \brief type definition for a time value \note On each configuration or platform the type could be whatever is needed - integer, pointer to structure etc. \note belongs to \ref configuration_sec */ #define _SlTime_t uint32_t #endif //SL_PLATFORM_MULTI_THREADED /*! \brief type definition for a sync object container Sync object is object used to synchronize between two threads or thread and interrupt handler. One thread is waiting on the object and the other thread send a signal, which then release the waiting thread. The signal must be able to be sent from interrupt context. This object is generally implemented by binary semaphore or events. \note On each configuration or platform the type could be whatever is needed - integer, structure etc. \note belongs to \ref configuration_sec */ #define _SlSyncObj_t SemaphoreP_Handle /*! \brief This function creates a sync object The sync object is used for synchronization between different thread or ISR and a thread. \param pSyncObj - pointer to the sync object control block \return upon successful creation the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_SyncObjCreate(pSyncObj,pName) Semaphore_create_handle( \ pSyncObj) /*! \brief This function deletes a sync object \param pSyncObj - pointer to the sync object control block \return upon successful deletion the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_SyncObjDelete(pSyncObj) SemaphoreP_delete_handle( \ pSyncObj) /*! \brief This function generates a sync signal for the object. All suspended threads waiting on this sync object are resumed \param pSyncObj - pointer to the sync object control block \return upon successful signaling the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note the function could be called from ISR context \warning */ #define sl_SyncObjSignal(pSyncObj) SemaphoreP_post_handle( \ pSyncObj) /*! \brief This function generates a sync signal for the object from Interrupt This is for RTOS that should signal from IRQ using a dedicated API \param pSyncObj - pointer to the sync object control block \return upon successful signaling the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note the function could be called from ISR context \warning */ #define sl_SyncObjSignalFromIRQ(pSyncObj) SemaphoreP_post_handle( \ pSyncObj) /*! \brief This function waits for a sync signal of the specific sync object \param pSyncObj - pointer to the sync object control block \param Timeout - numeric value specifies the maximum number of mSec to stay suspended while waiting for the sync signal Currently, the SimpleLink driver uses only two values: - OSI_WAIT_FOREVER - OSI_NO_WAIT \return upon successful reception of the signal within the timeout window return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #ifdef DeviceFamily_CC26X2 #define sl_SyncObjWait(pSyncObj,Timeout) SemaphoreP_pend( \ (*(pSyncObj)),(Timeout * 100)) #else #define sl_SyncObjWait(pSyncObj,Timeout) SemaphoreP_pend( \ (*(pSyncObj)),Timeout) #endif /*! \brief This function return the value for a counting semaphore \param pSyncObj - pointer to the sync object control block \param pValue - return value for the counting semaphore \note belongs to \ref configuration_sec \warning */ #define sl_SyncObjGetCount(pSyncObj,pValue) sem_getvalue(pSyncObj, \ pValue); /*! \brief type definition for a locking object container Locking object are used to protect a resource from mutual accesses of two or more threads. The locking object should support reentrant locks by a signal thread. This object is generally implemented by mutex semaphore \note On each configuration or platform the type could be whatever is needed - integer, structure etc. \note belongs to \ref configuration_sec */ #define _SlLockObj_t MutexP_Handle /*! \brief This function creates a locking object. The locking object is used for protecting a shared resources between different threads. \param pLockObj - pointer to the locking object control block \return upon successful creation the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_LockObjCreate(pLockObj, pName) Mutex_create_handle(pLockObj) /*! \brief This function deletes a locking object. \param pLockObj - pointer to the locking object control block \return upon successful deletion the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_LockObjDelete(pLockObj) MutexP_delete_handle( \ pLockObj) /*! \brief This function locks a locking object. All other threads that call this function before this thread calls the osi_LockObjUnlock would be suspended \param pLockObj - pointer to the locking object control block \param Timeout - numeric value specifies the maximum number of mSec to stay suspended while waiting for the locking object Currently, the SimpleLink driver uses only two values: - OSI_WAIT_FOREVER - OSI_NO_WAIT \return upon successful reception of the locking object the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_LockObjLock(pLockObj,Timeout) Mutex_lock(*(pLockObj)) /*! \brief This function unlock a locking object. \param pLockObj - pointer to the locking object control block \return upon successful unlocking the function should return 0 Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning */ #define sl_LockObjUnlock(pLockObj) Mutex_unlock(*(pLockObj)) /*! \brief This function call the pEntry callback from a different context \param pEntry - pointer to the entry callback function \param pValue - pointer to any type of memory structure that would be passed to pEntry callback from the execution thread. \param flags - execution flags - reserved for future usage \return upon successful registration of the spawn the function should return 0 (the function is not blocked till the end of the execution of the function and could be returned before the execution is actually completed) Otherwise, a negative value indicating the error code shall be returned \note belongs to \ref configuration_sec \warning User must implement it's own 'os_Spawn' function. */ //#define SL_PLATFORM_EXTERNAL_SPAWN #ifdef SL_PLATFORM_EXTERNAL_SPAWN #define sl_Spawn(pEntry,pValue,flags) os_Spawn(pEntry,pValue,flags) #endif /*! * Close the Doxygen group. @} */ /*! ****************************************************************************** \defgroup configuration_events Configuration - Event Handlers This section includes the asynchronous event handlers routines porting ACTION: -define your routine as the value of this handler @{ ****************************************************************************** */ /*! \brief Fatal Error async event for inspecting fatal error events. This event handles events/errors reported from the device/host driver \param[out] pSlFatalErrorEvent \par Parameters: - slFatalErrorEvent->Id = SL_DEVICE_EVENT_FATAL_DEVICE_ABORT , - slFatalErrorEvent->Id = SL_DEVICE_EVENT_FATAL_DRIVER_ABORT , - slFatalErrorEvent->Id = SL_DEVICE_EVENT_FATAL_NO_CMD_ACK , - slFatalErrorEvent->Id = SL_DEVICE_EVENT_FATAL_SYNC_LOSS , - slFatalErrorEvent->Id = SL_DEVICE_EVENT_FATAL_CMD_TIMEOUT , \note belongs to \ref configuration_sec \warning */ #define slcb_DeviceFatalErrorEvtHdlr SimpleLinkFatalErrorEventHandler /*! \brief General async event for inspecting general events. This event handles events/errors reported from the device/host driver \sa \note belongs to \ref configuration_sec \warning */ #define slcb_DeviceGeneralEvtHdlr SimpleLinkGeneralEventHandler /*! \brief WLAN Async event handler \param[out] pSlWlanEvent pointer to SlWlanEvent_t data \par Parameters: - pSlWlanEvent->Event = SL_WLAN_CONNECT_EVENT , STA or P2P client connection indication event - pSlWlanEvent->EventData.STAandP2PModeWlanConnected main fields: - ssid_name - ssid_len - bssid - go_peer_device_name - go_peer_device_name_len - pSlWlanEvent->Event = SL_WLAN_DISCONNECT_EVENT , STA or P2P client disconnection event - pSlWlanEvent->EventData.STAandP2PModeDisconnected main fields: - ssid_name - ssid_len - reason_code - pSlWlanEvent->Event = SL_WLAN_STA_CONNECTED_EVENT , AP/P2P(Go) connected STA/P2P(Client) - pSlWlanEvent->EventData.APModeStaConnected fields: - go_peer_device_name - mac - go_peer_device_name_len - wps_dev_password_id - own_ssid: relevant for event sta-connected only - own_ssid_len: relevant for event sta-connected only - pSlWlanEvent->Event = SL_WLAN_STA_DISCONNECTED_EVENT , AP/P2P(Go) disconnected STA/P2P(Client) - pSlWlanEvent->EventData.APModestaDisconnected fields: - go_peer_device_name - mac - go_peer_device_name_len - wps_dev_password_id - own_ssid: relevant for event sta-connected only - own_ssid_len: relevant for event sta-connected only - pSlWlanEvent->Event = SL_WLAN_SMART_CONFIG_COMPLETE_EVENT - pSlWlanEvent->EventData.smartConfigStartResponse fields: - status - ssid_len - ssid - private_token_len - private_token - pSlWlanEvent->Event = SL_WLAN_SMART_CONFIG_STOP_EVENT - pSlWlanEvent->EventData.smartConfigStopResponse fields: - status - pSlWlanEvent->Event = SL_WLAN_P2P_DEV_FOUND_EVENT - pSlWlanEvent->EventData.P2PModeDevFound fields: - go_peer_device_name - mac - go_peer_device_name_len - wps_dev_password_id - own_ssid: relevant for event sta-connected only - own_ssid_len: relevant for event sta-connected only - pSlWlanEvent->Event = SL_WLAN_P2P_NEG_REQ_RECEIVED_EVENT - pSlWlanEvent->EventData.P2PModeNegReqReceived fields - go_peer_device_name - mac - go_peer_device_name_len - wps_dev_password_id - own_ssid: relevant for event sta-connected only - pSlWlanEvent->Event = SL_WLAN_CONNECTION_FAILED_EVENT , P2P only - pSlWlanEvent->EventData.P2PModewlanConnectionFailure fields: - status \sa \note belongs to \ref configuration_sec \warning */ #define slcb_WlanEvtHdlr SimpleLinkWlanEventHandler /*! \brief NETAPP Async event handler \param[out] pSlNetApp pointer to SlNetAppEvent_t data \par Parameters: - pSlWlanEvent->Event = SL_NETAPP_IPV4_IPACQUIRED_EVENT, IPV4 acquired event - pSlWlanEvent->EventData.ipAcquiredV4 fields: - ip - gateway - dns - pSlWlanEvent->Event = SL_NETAPP_IP_LEASED_EVENT, AP or P2P go dhcp lease event - pSlWlanEvent->EventData.ipLeased fields: - ip_address - lease_time - mac - pSlWlanEvent->Event = SL_NETAPP_IP_RELEASED_EVENT, AP or P2P go dhcp ip release event - pSlWlanEvent->EventData.ipReleased fields - ip_address - mac - reason \sa \note belongs to \ref configuration_sec \warning */ #define slcb_NetAppEvtHdlr \ SimpleLinkNetAppEventHandler /*! \brief HTTP server async event \param[out] pSlHttpServerEvent pointer to SlHttpServerEvent_t \param[in] pSlHttpServerResponse pointer to SlHttpServerResponse_t \par Parameters: \n - pSlHttpServerEvent->Event = SL_NETAPP_HTTPGETTOKENVALUE_EVENT - pSlHttpServerEvent->EventData fields: - httpTokenName - data - len - pSlHttpServerResponse->ResponseData fields: - data - len - pSlHttpServerEvent->Event = SL_NETAPP_HTTPPOSTTOKENVALUE_EVENT - pSlHttpServerEvent->EventData.httpPostData fields: - action - token_name - token_value - pSlHttpServerResponse->ResponseData fields: - data - len \sa \note belongs to \ref configuration_sec \warning */ #define slcb_NetAppHttpServerHdlr SimpleLinkHttpServerEventHandler /*! \brief A handler for handling Netapp requests. Netapp request types: For HTTP server: GET / POST (future: PUT / DELETE) \param \param \sa \note belongs to \ref porting_sec \warning */ #define slcb_NetAppRequestHdlr SimpleLinkNetAppRequestEventHandler /*! \brief A handler for freeing the memory of the NetApp response. \param \param \sa \note belongs to \ref porting_sec \warning */ #define slcb_NetAppRequestMemFree SimpleLinkNetAppRequestMemFreeEventHandler /*! \brief Socket Async event handler \param[out] pSlSockEvent pointer to SlSockEvent_t data \par Parameters:\n - pSlSockEvent->Event = SL_SOCKET_TX_FAILED_EVENT - pSlSockEvent->EventData fields: - sd - status - pSlSockEvent->Event = SL_SOCKET_ASYNC_EVENT - pSlSockEvent->EventData fields: - sd - type: SSL_ACCEPT or RX_FRAGMENTATION_TOO_BIG or OTHER_SIDE_CLOSE_SSL_DATA_NOT_ENCRYPTED - val \sa \note belongs to \ref configuration_sec \warning */ #define slcb_SockEvtHdlr SimpleLinkSockEventHandler /*! \brief Trigger Async event handler. If define, sl_Select operates only in trigger mode. To disable trigger mode, handler should not be defined. \param[out] pSlTriggerEvent pointer to SlSockTriggerEvent_t data \par Parameters:\n - pSlTriggerEvent->Event = SL_SOCKET_TRIGGER_EVENT_SELECT - pSlTriggerEvent->EventData: Not in use \sa \note belongs to \ref configuration_sec \warning */ #ifndef SL_PLATFORM_MULTI_THREADED #define slcb_SocketTriggerEventHandler SimpleLinkSocketTriggerEventHandler #endif /*! Close the Doxygen group. @} */ #ifdef __cplusplus } #endif // __cplusplus #endif // __USER_H__