=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2025.07.24 16:05:35 =~=~=~=~=~=~=~=~=~=~=~=
[  722.681561] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  752.681555] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  782.681558] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197

root@s40-bigbend-v1:/lcc/data/logs/debug# 
root@s40-bigbend-v1:/lcc/data/logs/debug# reboot
[  OK  ] Stopped target Remote Encrypted Volumes.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target RPC Port Mapper.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped Daily rotation of log files.
[  OK  ] Stopped Daily Cleanup of Temporary Directories.
[  [  790.145475] watchdog: watchdog0: nowayout prevents watchdog being stopped!
[  790.145489] watchdog: watchdog0: watchdog did not stop!
OK  ] Stopped target Hardware activated USB gadget.
         Stopping GENIVI DLT logging daemon...
         Stopping Load/Save Random Seed...
         Stopping USB gadget...
         Stopping watchdog keepalive daemon...
[  OK  ] Stopped GENIVI DLT logging daemon.
[  OK  ] Stopped Load/Save Random Seed.
[  790.216526] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.228340] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.236104] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.242921] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.249182] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.256388] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.264158] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.271493] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
m[  790.278633] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
  OK    790.286754] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
[  790.294375] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
0m[  790.301506] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
ro[  790.308941] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
ot[  790.316233] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
@s40-bigbend-v1:/lcc/data/logs/debug# ] Stopped [  790.327815] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
  790.335321] dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called in host mode?
mwatchdog keepalive daemon.
[  OK  ] Stopped target Multi-User System.
[  OK  ] Stopped Timer - Monitor CPU, Mem, FD, threads counts for LX processes.
[  OK  ] Stopped target Login Prompts.
         Stopping D-Bus System Message Bus...
         Stopping DNS forwarder and DHCP server...
         Stopping Getty on tty1...
         Stopping Mosquitto MQTT v3.1/v3.1.1 Broker...
         Stopping Network Time Service...
         Stopping Network Router Discovery Daemon...
         Stopping Serial Getty on ttySTM8...
[  OK  ] Stopped slot-mark-booted.service.
         Stopping Simple Network Management Protocol (SNMP) Daemon....
         Stopping Simple Network Management Protocol (SNMP) Trap Daemon....
         Stopping System Logger Daemon "default" instance...
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped Serial Getty on ttySTM8.
[  OK  ] Stopped System Logger Daemon "default" instance.
[  OK  ] Stopped Mosquitto MQTT v3.1/v3.1.1 Broker.
[  OK  ] Stopped Network Router Discovery Daemon.
[  OK  ] Stopped Simple Network Management Protocol (SNMP) Daemon..
[  OK  ] Stopped Simple Network Management Protocol (SNMP) Trap Daemon..
[  OK  ] Stopped Network Time Service.
[  OK  ] Stopped USB gadget.
[  OK  ] Stopped DNS forwarder and DHCP server.
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[  OK  ] Removed slice system-syslog\x2dng.slice.
[  OK  ] Stopped target Network.
[  OK  ] Stopped target Network (Pre).
[  OK  ] Stopped IPv4 Packet Filtering Framework.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Slices.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Closed sshd.socket.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped target Local Encrypted Volumes.
         Stopping Cryptography Setup for app...
         Stopping Cryptography Setup for config...
         Stopping Cryptography Setup for data...
         Stopping Cryptography Setup for homekit...
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped Load Kernel Modules.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped target Local File Systems.
         Unmounting /boot...
         Unmounting /etc/machine-id...
         Unmounting /lcc/config...
         Unmounting /lcc/data...
         Unmounting /lcc/hkapplication...
         Unmounting Temporary Directory (/tmp)...
         Unmounting /var/cache...
         Unmounting /var/lib...
         Unmounting /var/spool...
         Stopping Bind mount volatile /var/cache...
         Stopping Bind mount volatile /var/lib...
         Stopping Bind mount volatile /var/spool...
[  OK  ] Stopped Cryptography Setup for app.
[  OK  ] Stopped Cryptography Setup for config.
[  OK  ] Stopped Cryptography Setup for data.
[  OK  ] Stopped Cryptography Setup for homekit.
[  OK  ] Unmounted /boot.
[  OK  ] Unmounted /etc/machine-id.
[  OK  ] Unmounted /lcc/config.
[FAILED] Failed unmounting /lcc/data.
[  OK  ] Unmounted /lcc/hkapplication.
[  OK  ] Unmounted Temporary Directory (/tmp).
[  OK  ] Unmounted /var/cache.
[  OK  ] Unmounted /var/lib.
[  OK  ] Unmounted /var/spool.
[  OK  ] Stopped Bind mount volatile /var/cache.
[  OK  ] Stopped Bind mount volatile /var/lib.
[  OK  ] Stopped Bind mount volatile /var/spool.
[  OK  ] Removed slice system-systemd\x2dcryptsetup.slice.
[  OK  ] Stopped target Local Encrypted Volumes (Pre).
         Unmounting /lcc...
         Unmounting /var/volatile...
[FAILED] Failed unmounting /lcc.
[  OK  ] Unmounted /var/volatile.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped target Swap.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Reached target Shutdown.
[  OK  ] Reached target Final Step.
[  OK  ] Started Reboot.
[  OK  ] Reached target Reboot.
[  793.301414] systemd-shutdown[1]: Syncing filesystems and block devices.
[  793.318714] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[  793.346658] systemd-journald[193]: Received SIGTERM from PID 1 (systemd-shutdow).
[  793.369535] wlcore: down
[  793.580097] wlcore: down
[  793.589785] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[  793.607089] systemd-shutdown[1]: Hardware watchdog 'STM32 Independent Watchdog', version 0
[  793.620039] systemd-shutdown[1]: Unmounting file systems.
[  793.628946] [2644]: Remounting '/lcc/data' read-only in with options '(null)'.
[  793.665776] EXT4-fs (dm-3): re-mounted. Opts: (null)
[  793.675805] [2645]: Unmounting '/lcc/data'.
[  793.693209] [2646]: Remounting '/lcc' read-only in with options '(null)'.
[  793.716922] EXT4-fs (dm-1): re-mounted. Opts: (null)
[  793.727726] [2647]: Unmounting '/lcc'.
[  793.852806] systemd-shutdown[1]: All filesystems unmounted.
[  793.856938] systemd-shutdown[1]: Deactivating swaps.
[  793.862159] systemd-shutdown[1]: All swaps deactivated.
[  793.867099] systemd-shutdown[1]: Detaching loop devices.
[  793.880027] systemd-shutdown[1]: All loop devices detached.
[  793.884158] systemd-shutdown[1]: Detaching DM devices.
[  793.894111] systemd-shutdown[1]: Detaching DM /dev/dm-3 (254:3).
[  793.959083] systemd-shutdown[1]: Detaching DM /dev/dm-2 (254:2).
[  794.009144] systemd-shutdown[1]: Detaching DM /dev/dm-1 (254:1).
[  794.059180] systemd-shutdown[1]: Detaching DM /dev/dm-0 (254:0).
[  794.131254] systemd-shutdown[1]: All DM devices detached.
[  794.135389] systemd-shutdown[1]: All filesystems, swaps, loop devices and DM devices detached.
[  794.152966] systemd-shutdown[1]: Syncing filesystems and block devices.
[  794.158598] systemd-shutdown[1]: Rebooting.
[  794.192688] reboot: ResNOTICE:  CPU: STM32MP157FAA Rev.Z
NOTICE:  Model: Lennox S40 'BigBend'
NOTICE:  BL2: v2.4-r1.0(release):v1.0.12-37-gfdb4bc740
NOTICE:  BL2: Built : 13:34:03, Sep 26 2024
NOTICE:  BL2: Booting BL32
NOTICE:  SP_MIN: v2.4-r1.0(release):v1.0.12-37-gfdb4bc740
NOTICE:  SP_MIN: Built : 13:34:03, Sep 26 2024


U-Boot 2020.01-stm32mp-r2.1-00164-g7c307aa115-dirty (Aug 21 2024 - 09:04:04 +0000)

CPU: STM32MP157FAA Rev.Z
Model: Lennox S40 'BigBend' V1
DRAM:  1 GiB
Clocks:
- MPU : 800 MHz
- MCU : 208.878 MHz
- AXI : 266.500 MHz
- PER : 24 MHz
- DDR : 533 MHz
WDT:   Started without servicing (90s timeout)
MMC:   STM32 SD/MMC: 1, STM32 SD/MMC: 2
switch to partitions #0, OK
mmc2(part 0) is current device

MMC read: dev # 2, block # 6144, count 2048 ... 2048 blocks read: OK
switch to partitions #0, OK
mmc2(part 0) is current device

MMC write: dev # 2, block # 6144, count 2048 ... 2048 blocks written: OK
14445897 bytes read in 329 ms (41.9 MiB/s)
## Copying 'splash' subimage from FIT image at c4000000 ...
sha256+    Loading part 0 ... OK
## Executing script at c4000000
gpio: pin 144 (gpio 144) value is 0
gpio: pin 144 (gpio 144) value is 1
## Loading kernel from FIT Image at c4000000 ...
   Using 'config' configuration
   Trying 'kernel' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xc480db8c
     Data Size:    4973872 Bytes = 4.7 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0xc2000040
     Entry Point:  0xc2000040
     Hash algo:    sha256
     Hash value:   bbd0129aa33696bfcba0c65265555dc4b7d14e1a6853850ebd9bfdef297af5b6
     Sign algo:    sha256,rsa2048:kernel
     Sign value:   unavailable
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at c4000000 ...
   Using 'config' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  RAM disk
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0xc40000ac
     Data Size:    8361200 Bytes = 8 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   453bdfa837a4637067931cbd6e3099b43e71bd486962a9a22bb1a0b4e514f84a
     Sign algo:    sha256,rsa2048:kernel
     Sign value:   unavailable
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at c4000000 ...
   Using 'config' configuration
   Trying 'fdt' fdt subimage
     Description:  Device tree
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xc47f96ac
     Data Size:    82907 Bytes = 81 KiB
     Architecture: ARM
     Hash algo:    sha256
     Hash value:   77e18feff772220948d38c800a3cbd73051194ceeee9ec9ae73dfab047fd33fa
     Sign algo:    sha256,rsa2048:kernel
     Sign value:   unavailable
   Verifying Hash Integrity ... sha256+ OK
   Booting using the fdt blob at 0xc47f96ac
   Loading Kernel Image
   Loading Ramdisk to cf806000, end cffff4f0 ... OK
   Loading Device Tree to cf7ee000, end cf8053da ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.56 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Mon Jul 7 09:22:30 UTC 2025
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Lennox S40 'BigBend' V1
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xf7800000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 20 pages/cpu s50700 r8192 d23028 u81920
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 244031
[    0.000000] Kernel command line: mc_reset=35 mp_reset=15 console=ttySTM8,115200 watchdog.open_timeout=120 root=/dev/disk/by-bootslot/current/rootfs ro rootwait boot.device=sdmmc2 boot.slot=0
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 823092K/983036K available (7168K kernel code, 389K rwdata, 1616K rodata, 1024K init, 170K bss, 28872K reserved, 131072K cma-reserved, 131068K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: RCU event tracing is enabled.
[    0.000000] Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4f4 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000023] Switching to timer-based delay loop, resolution 41ns
[    0.000888] Console: colour dummy device 80x30
[    0.000937] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000954] pid_max: default: 32768 minimum: 301
[    0.001178] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.001200] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.002358] CPU: Testing write buffer coherency: ok
[    0.002840] /cpus/cpu@0 missing clock-frequency property
[    0.002867] /cpus/cpu@1 missing clock-frequency property
[    0.002882] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.059926] Setting up static identity map for 0xc0100000 - 0xc0100060
[    0.079899] rcu: Hierarchical SRCU implementation.
[    0.120016] smp: Bringing up secondary CPUs ...
[    0.200531] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.200722] smp: Brought up 1 node, 2 CPUs
[    0.200741] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.200750] CPU: All CPU(s) started in SVC mode.
[    0.201545] devtmpfs: initialized
[    0.224209] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.224791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.224822] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.230111] pinctrl core: initialized pinctrl subsystem
[    0.231598] NET: Registered protocol family 16
[    0.233848] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.235406] cpuidle: using governor menu
[    0.235756] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.235769] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.236117] Serial: AMBA PL011 UART driver
[    0.238473] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
[    0.238507] stm32-pm-domain pm_domain: subdomain core-power-domain registered
[    0.238520] stm32-pm-domain pm_domain: domains probed
[    0.268742] clocksource: Switched to clocksource arch_sys_counter
[    0.334725] thermal_sys: Registered thermal governor 'step_wise'
[    0.335289] NET: Registered protocol family 2
[    0.336198] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.336242] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.336335] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.336480] TCP: Hash tables configured (established 8192 bind 8192)
[    0.336653] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.336715] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.336986] NET: Registered protocol family 1
[    0.337371] Trying to unpack rootfs image as initramfs...
[    0.994643] Freeing initrd memory: 8168K
[    0.995327] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.997255] Initialise system trusted keyrings
[    0.997614] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.008376] NET: Registered protocol family 38
[    1.008399] Key type asymmetric registered
[    1.008410] Asymmetric key parser 'x509' registered
[    1.008485] bounce: pool size: 64 pages
[    1.008539] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.008553] io scheduler mq-deadline registered
[    1.014972] STM32 USART driver initialized
[    1.031161] brd: module loaded
[    1.044100] loop: module loaded
[    1.044512] gpio-pulse lennox-pulse: unable to get GPIO from dt
[    1.045706] i2c /dev entries driver
[    1.047215] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.048074] stm32-cpufreq stm32-cpufreq: Failed to get chip info: -517
[    1.049183] sdhci: Secure Digital Host Controller Interface driver
[    1.049195] sdhci: Copyright(c) Pierre Ossman
[    1.049203] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.049802] arm-smc-mbox mailbox-0: ARM SMC mailbox enabled.
[    1.049909] arm-smc-mbox mailbox-1: ARM SMC mailbox enabled.
[    1.050455] Unable to get STM32 DDR PMU clock
[    1.051638] ThumbEE CPU extension supported.
[    1.051675] Registering SWP/SWPB emulation handler
[    1.052099] registered taskstats version 1
[    1.052111] Loading compiled-in X.509 certificates
[    1.056145] gpio-pulse lennox-pulse: unable to get GPIO from dt
[    1.058218] arm-scmi firmware:scmi-0: SCMI Protocol v2.0 'ST:' Firmware version 0x0
[    1.058979] Unable to get STM32 DDR PMU clock
[    1.062589] gpio-pulse lennox-pulse: unable to get GPIO from dt
[    1.067830] Unable to get STM32 DDR PMU clock
[    1.096725] stm32-mdma 58000000.dma: STM32 MDMA driver registered
[    1.097319] stm32-dma 48000000.dma: no dma pool: can't use MDMA: 0
[    1.098652] stm32-dma 48000000.dma: STM32 DMA driver registered
[    1.099131] stm32-dma 48001000.dma: no dma pool: can't use MDMA: 0
[    1.100481] stm32-dma 48001000.dma: STM32 DMA driver registered
[    1.103892] gpio-pulse lennox-pulse: unable to get GPIO from dt
[    1.106447] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
[    1.109764] stm32-ddr-pmu: probed (ID=0x00140061 VER=0x00000010), DDR@533MHz
[    1.110243] /soc/interrupt-controller@5000d000: bank0
[    1.110257] /soc/interrupt-controller@5000d000: bank1
[    1.110267] /soc/interrupt-controller@5000d000: bank2
[    1.111914] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
[    1.112110] GPIO line 22 (LCD_RESET) hogged as output/high
[    1.112415] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
[    1.112869] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
[    1.113236] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
[    1.113377] GPIO line 75 (LCD_PWR_SEQ_EN) hogged as output/high
[    1.113633] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOE bank added
[    1.113986] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOF bank added
[    1.114323] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOG bank added
[    1.114678] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOH bank added
[    1.115015] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOI bank added
[    1.115403] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOJ bank added
[    1.115772] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOK bank added
[    1.115924] stm32mp157-pinctrl soc:pin-controller@50002000: Pinctrl STM32 initialized
[    1.116702] stm32mp157-pinctrl soc:pin-controller-z@54004000: GPIOZ bank added
[    1.116724] stm32mp157-pinctrl soc:pin-controller-z@54004000: Pinctrl STM32 initialized
[    1.118377] 40010000.serial: ttySTM4 at MMIO 0x40010000 (irq = 54, base_baud = 4000000) is a stm32-usart
[    1.119946] stm32-usart 40019000.serial: interrupt mode for rx (no dma)
[    1.119966] stm32-usart 40019000.serial: interrupt mode for tx (no dma)
[    1.119995] 40019000.serial: ttySTM8 at MMIO 0x40019000 (irq = 55, base_baud = 4000000) is a stm32-usart
[    1.124974] random: fast init done
[    1.133866] printk: console [ttySTM8] enabled
[    1.144094] random: crng init done
[    1.965125] gpio-pulse lennox-pulse: short auto pulse is not defined: -22
[    1.971851] gpio-pulse lennox-pulse: First pulse generated automatically
[    1.980476] stm32_rtc 5c004000.rtc: registered as rtc0
[    1.984482] stm32_rtc 5c004000.rtc: registered rev:1.2
[    2.005194] stm32f7-i2c 40012000.i2c: using dma1chan2 (tx) and dma1chan3 (rx) for DMA transfers
[    2.023883] at24 1-0054: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[    2.029340] stm32f7-i2c 40012000.i2c: STM32F7 I2C-1 bus adapter
[    2.050919] stm32f7-i2c 40013000.i2c: doesn't use DMA
[    2.055033] stm32f7-i2c 40013000.i2c: STM32F7 I2C-2 bus adapter
[    2.076300] stm32f7-i2c 40014000.i2c: using dma1chan4 (tx) and dma1chan5 (rx) for DMA transfers
[    2.084293] stm32f7-i2c 40014000.i2c: STM32F7 I2C-3 bus adapter
[    2.107495] stm32f7-i2c 5c002000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
[    2.115757] stpmic1 4-0033: Restart request set in PMIC
[    2.120415] stpmic1 4-0033: PMIC Chip Version: 0x21
[    2.124935] stpmic1 4-0033: PMIC Restart status: 0x1
[    2.130914] genirq: irq_chip stm32-exti-h did not update eff. affinity mask of irq 65
[    2.138429] BUCK1: supplied by vin
[    2.144209] BUCK2: supplied by vin
[    2.149105] BUCK3: supplied by vin
[    2.153928] BUCK4: supplied by vin
[    2.158873] LDO1: supplied by v3v3
[    2.160993] vdda: Bringing 1800000uV into 2900000-2900000uV
[    2.168134] LDO2: supplied by v3v3
[    2.170309] v2v8: Bringing 1800000uV into 2800000-2800000uV
[    2.176874] LDO3: supplied by vdd_ddr
[    2.182388] LDO4: supplied by vin
[    2.187537] LDO5: supplied by v3v3
[    2.192764] LDO6: supplied by regulator-dummy
[    2.196113] VREF_DDR: supplied by vin
[    2.202188] BOOST: supplied by vin
[    2.204816] VBUS_OTG: supplied by bst_out
[    2.208856] SW_OUT: supplied by bst_out
[    2.216728] stm32f7-i2c 5c002000.i2c: STM32F7 I2C-4 bus adapter
[    2.223968] mmci-pl18x 48004000.sdmmc: allocated mmc-pwrseq
[    2.228417] mmci-pl18x 48004000.sdmmc: mmc0: PL180 manf 53 rev2 at 0x48004000 irq 40,0 (pio)
[    2.596308] mmci-pl18x 58005000.sdmmc: mmc1: PL180 manf 53 rev2 at 0x58005000 irq 46,0 (pio)
[    2.610685] mmci-pl18x 48004000.sdmmc: card claims to support voltages below defined range
[    2.630551] mmci-pl18x 58007000.sdmmc: mmc2: PL180 manf 53 rev2 at 0x58007000 irq 47,0 (pio)
[    2.643630] mmc0: new high speed SDIO card at address 0001
[    2.663925] reg18: supplied by vdd
[    2.667676] ili9881c-dsi 5a000000.dsi.0: no power regulator found: -19
[    2.674022] ili9881c-dsi 5a000000.dsi.0: nonexclusive access to GPIO for reset
[    2.684356] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.689618] [drm] Driver supports precise vblank timestamp query.
[    2.697386] [drm] Initialized stm 1.0.0 20170330 for 5a001000.display-controller on minor 0
[    2.708521] stm32-display 5a001000.display-controller: fb0: stmdrmfb frame buffer device
[    2.715706] stm32_rtc 5c004000.rtc: setting system clock to 2021-02-06T05:57:26 UTC (1612591046)
[    2.735775] Freeing unused kernel memory: 1024K
[    2.776821] mmc2: new DDR MMC card at address 0001
[    2.780421] Run /init as init process
[    2.794531] mmcblk2: mmc2:0001 DG4016 14.7 GiB 
[    2.797987] mmcblk2boot0: mmc2:0001 DG4016 partition 1 4.00 MiB
[    2.804084] mmcblk2boot1: mmc2:0001 DG4016 partition 2 4.00 MiB
[    2.810010] mmcblk2rpmb: mmc2:0001 DG4016 partition 3 4.00 MiB, chardev (248:0)
[    2.838002]  mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    2.880738] systemd[1]: systemd 244.5+ running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    2.902268] systemd[1]: Detected architecture arm.
[    2.905631] systemd[1]: Running in initial RAM disk.

Welcome to Lennox v1.0.13-446-gf5cfd4c (lennox-dunfell)!

[    2.989113] systemd[1]: Set hostname to <s40-bigbend-v1>.
[    2.993407] systemd[1]: Initializing machine ID from random generator.
[    3.335957] systemd[1]: Reached target Local Encrypted Volumes.
[  OK  ] Reached target Local Encrypted Volumes.
[    3.369161] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    3.399025] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    3.429034] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    3.464614] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    3.472190] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    3.509941] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    3.549774] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    3.589549] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    3.629891] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    3.645077] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    3.685034] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    3.724594] systemd[1]: Started Utility to display gif images.
[  OK  ] Started Utility to display gif images.
[    3.759348] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[    3.775685] systemd[1]: Starting Rebuild Hardware Database...
         Starting Rebuild Hardware Database...
[    3.817349] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    3.850324] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    3.857768] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    3.871671] systemd[1]: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[    3.925513] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    3.947518] [DEBUG] display check (0x0a) = 0x08
[    3.950801] ili9881c-dsi 5a000000.dsi.0: [DEBUG - 2] prepare() display check (0x0a) = 0x08
[    3.975174] systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[    4.005054] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    4.049274] systemd[1]: Condition check resulted in Bind mount volatile /var/cache being skipped.
[    4.056892] systemd[1]: Condition check resulted in Bind mount volatile /var/lib being skipped.
[    4.092520] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save[    4.099963] ili9881c-dsi 5a000000.dsi.0: [DEBUG] prepare() display check (0x0a) = 0x98
 Random Seed...
[    4.128458] stm32-display-dsi 5a000000.dsi: Timeout during read operation
[    4.139176] systemd[1]: Condition check resulted in Bind mount volatile /var/spool being skipped.
[    4.146817] systemd[1]: Condition check resulted in Bind mount volatile /srv being skipped.
[    4.155269] stm32-display-dsi 5a000000.dsi: Timeout during read operation
[    4.169065] systemd[1]: Reached target Local File Systems.
[  OK  ] Reached target Local File Systems.
[    4.189074] stm32-display-dsi 5a000000.dsi: failed to write command FIFO
[    4.210021] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    4.230216] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Rebuild Hardware Database.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Load/Save Random Seed.
         Starting Flush Journal to Persistent Storage...
         Starting udev Kernel Device Manager...
[    4.603170] systemd-journald[81]: Received client request to flush runtime journal.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Rebuild Journal Catalog...
[  OK  ] Started Rebuild Journal Catalog.
         Starting Update is Completed...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Update is Completed.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Found device /dev/disk/by-bootslot/current/rootfs.
[  OK  ] Reached target Initrd Root Device.
         Starting File System Check/by-bootslot/current/rootfs...
[  OK  ] Started File System Check sk/by-bootslot/current/rootfs.
         Mounting /sysroot...
[    8.211938] EXT4-fs (mmcblk2p4): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Mounted /sysroot.
[  OK  ] Reached target Initrd Root File System.
         Starting Reload Configuration from the Real Root...
[  OK  ] Started Reload Configuration from the Real Root.
[  OK  ] Reached target Initrd File Systems.
[  OK  ] Reached target Initrd Default Target.
         Starting Cleaning Up and Shutting Down Daemons...
[  OK  ] Started Cleaning Up and Shutting Down Daemons.
[  OK  ] Stopped target Initrd Default Target.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Initrd Root Device.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Slices.
[  OK  ] Stopped target Sockets.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped Daily Cleanup of Temporary Directories.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped target Local Encrypted Volumes.
[  OK  ] Stopped target Swap.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped udev Coldplug all Devices.
         Stopping udev Kernel Device Manager...
[  OK  ] Stopped Update is Completed.
[  OK  ] Stopped Rebuild Journal Catalog.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped target Local File Systems.
         Stopping Flush Journal to Persistent Storage...
[  OK  ] Stopped udev Kernel Device Manager.
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Stopped Flush Journal to Persistent Storage.
[  OK  ] Closed udev Control Socket.
[  OK  ] Closed udev Kernel Socket.
         Starting Cleanup udevd DB...
[  OK  ] Stopped Rebuild Hardware Database.
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Started Cleanup udevd DB.
[  OK  ] Reached target Switch Root.
         Starting Switch Root...
[   12.284769] systemd-journald[81]: Received SIGTERM from PID 1 (systemd).
[   12.714678] NET: Registered protocol family 10
[   12.769262] Segment Routing with IPv6
[   12.795300] systemd[1]: systemd 244.5+ running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[   12.824014] systemd[1]: Detected architecture arm.

Welcome to Lennox v1.0.13-446-gf5cfd4c (lennox-dunfell)!

[   12.872750] systemd[1]: Set hostname to <s40-bigbend-v1>.
[   12.881997] systemd[1]: Initializing machine ID from random generator.
[   12.887548] systemd[1]: Installed transient /etc/machine-id file.
[   15.383918] systemd[1]: initrd-switch-root.service: Succeeded.
[   15.391828] systemd[1]: Stopped Switch Root.
[  OK  ] Stopped Switch Root.
[   15.432926] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[   15.442851] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[   15.481681] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[   15.521614] systemd[1]: Created slice system-syslog\x2dng.slice.
[  OK  ] Created slice system-syslog\x2dng.slice.
[   15.561626] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[  OK  ] Created slice system-systemd\x2dcryptsetup.slice.
[   15.599714] systemd[1]: Stopped target Switch Root.
[  OK  ] Stopped target Switch Root.
[   15.639262] systemd[1]: Stopped target Initrd File Systems.
[  OK  ] Stopped target Initrd File Systems.
[   15.689230] systemd[1]: Stopped target Initrd Root File System.
[  OK  ] Stopped target Initrd Root File System.
[   15.729458] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[   15.759356] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[   15.799300] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[   15.829367] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[   15.899752] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[   15.939421] systemd[1]: Reached target RPC Port Mapper.
[  OK  ] Reached target RPC Port Mapper.
[   15.980522] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[   16.020077] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[   16.060432] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   16.072326] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[   16.086139] systemd[1]: Mounting Temporary Directory (/tmp)...
         Mounting Temporary Directory (/tmp)...
[   16.128014] systemd[1]: Starting Create list of static device nodes for the current kernel...
         Starting Create list of stodes for the current kernel...
[   16.195477] systemd[1]: Starting Key derivations...
         Starting Key derivations...
[   16.237577] systemd[1]: Starting RPC Bind...
         Starting RPC Bind...
[   16.271015] systemd[1]: systemd-fsck-root.service: Succeeded.
[   16.286738] systemd[1]: Stopped File System Check on Root Device.
[  OK  ] Stopped File System Check on Root Device.
[   16.329441] systemd[1]: Stopped Journal Service.
[  OK  ] Stopped Journal Service.
[   16.369828] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[   16.399339] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[   16.448974] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   16.473866] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[   16.512972] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   16.542020] systemd[1]: sysroot.mount: Succeeded.
[   16.573013] fuse: init (API version 7.31)
[   16.577884] systemd[1]: Started RPC Bind.
[  OK  ] Started RPC Bind.
[   16.597381] systemd[1]: Mounted Temporary Directory (/tmp).
[  OK  ] Mounted Temporary Directory (/tmp).
[   16.650658] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Started Create list of sta nodes for the current kernel.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
         Mounting FUSE Control File System...
         Starting Flush Journal to Persistent Storage...
         Starting Apply Kernel Variables...
[   16.921046] systemd-journald[195]: Received client request to flush runtime journal.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /boot...
         Mounting /var/volatile...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /var/volatile.
[   17.352132] EXT4-fs (mmcblk2p3): mounted filesystem with ordered data mode. Opts: (null)
         Starting    17.360744] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
;1;39mBind mount volatile /var/cache...
         Starting Bind mount volatile /var/lib...
         Starting Bind mount volatile /var/spool...
[  OK  ] Mounted /boot.
[  OK  ] Started Key derivations.
[  OK  ] Reached target Local Encrypted Volumes (Pre).
[  OK  ] Reached target Remote Encrypted Volumes.
         Starting Cryptography Setup for app...
         Starting Cryptography Setup for config...
         Starting Cryptography Setup for data...
         Starting Cryptography Setup for homekit...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Bind mount volatile /var/cache.
[  OK  ] Started Bind mount volatile /var/spool.
[   18.581951] CAN device driver interface
[   18.628110] m_can_platform 4400e000.can: m_can device registered (irq=50, version=32)
[   18.774938] usbcore: registered new interface driver usbfs
[   18.785210] atmel_mxt_ts 3-004a: Family: 166 Variant: 0 Firmware V1.0.AA Objects: 45
[   18.818032] usbcore: registered new interface driver hub
[   18.846225] usbcore: registered new device driver usb
[   18.870767] atmel_mxt_ts 3-004a: Direct firmware load for maxtouch.cfg failed with error -2
[   18.908406] atmel_mxt_ts 3-004a: Touchscreen size X799Y1279
[   18.957116] input: Atmel maXTouch Touchscreen as /devices/platform/soc/40014000.i2c/i2c-3/3-004a/input/input0
[   19.000221] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.020130] galcore: loading out-of-tree module taints kernel.
[   19.059971] ehci-platform: EHCI generic platform driver
[   19.143071] reg11: supplied by vdd
[   19.146792] stm32-usbphyc 5a006000.usbphyc: registered rev:1.0
[   19.228186] Galcore version 6.4.3.279124
[   19.229885] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_d not found, using dummy regulator
[   19.279055] dwc2 49000000.usb-otg: 49000000.usb-otg supply vusb_a not found, using dummy regulator
[   19.418987] usb33: supplied by vdd_usb
[   19.421581] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[   19.530097] dwc2 49000000.usb-otg: DWC OTG Controller
[   19.533742] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 1
[   19.661062] dwc2 49000000.usb-otg: irq 78, io mem 0x49000000
[   19.752785] hub 1-0:1.0: USB hub found
[   19.755183] hub 1-0:1.0: 1 port detected
[   19.828056] ehci-platform 5800d000.usbh-ehci: EHCI Host Controller
[   19.853404] ehci-platform 5800d000.usbh-ehci: new USB bus registered, assigned bus number 2
[   19.965930] ehci-platform 5800d000.usbh-ehci: irq 77, io mem 0x5800d000
[   20.078982] ehci-platform 5800d000.usbh-ehci: USB 2.0 started, EHCI 1.00
[   20.132939] hub 2-0:1.0: USB hub found
[   20.190000] hub 2-0:1.0: 2 ports detected
[   20.299022] usb 1-1: new high-speed USB device number 2 using dwc2
[   22.036447] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.160069] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.152109] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[   23.298582] asix 1-1:1.0 eth0: register 'asix' at usb-49000000.usb-otg-1, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ba:17:be
[   23.362628] usbcore: registered new interface driver asix
[   24.810235] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   24.866246] wlcore: loaded
[   24.867541] wlcore: driver version: R8.9
[*     ] (1 of 9) A start job is running for /dev/mapper/app (5s / no limit)

[**    ] (1 of 9) A start job is running for /dev/mapper/app (6s / no limit)

[***   ] (1 of 9) A start job is running for /dev/mapper/app (6s / no limit)

[ ***  ] (2 of 9) A start job is running forphy Setup for data (7s / no limit)

[  *** ] (2 of 9) A start job is running forphy Setup for data (7s / no limit)

[   ***] (2 of 9) A start job is running forphy Setup for data (8s / no limit)

[    **] (3 of 9) A start job is running for /dev/mapper/data (9s / no limit)
[   31.224278] cryptd: max_cpu_qlen set to 1000

[  OK  ] Found device /dev/mapper/config.
[  OK  ] Started Cryptography Setup for config.
[  OK  ] Found device /dev/mapper/app.
[  OK  ] Started Cryptography Setup for app.
[  OK  ] Started Cryptography Setup for homekit.
[  OK  ] Started Cryptography Setup for data.
[  OK  ] Found device /dev/mapper/homekit.
[  OK  ] Started Bind mount volatile /var/lib.
[  OK  ] Found device /dev/mapper/data.
[  OK  ] Reached target Local Encrypted Volumes.
         Mounting /lcc...
         Starting Load/Save Random Seed...
[  OK  ] Started Load/Save Random Seed.
[   32.639482] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Mounted /lcc.
[   32.681612] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1139
         Mounting /lcc/config...
         Mounting /lcc/data...
         Mounting /lcc/hkapplication...
[   32.892912] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   32.906670] ext4 filesystem being mounted at /lcc/config supports timestamps until 2038 (0x7fffffff)
[  OK  ] Mounted /lcc/config.
[   33.096486] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Mounted /lcc/data   33.128887] vdd_sd: disabling
m.
[   33.140877] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   33.147123] ext4 filesystem being mounted at /lcc/hkapplication supports timestamps until 2038 (0x7fffffff)
[  OK  ] Mounted /lcc/hkapplication.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Timer - Monitor CPreads counts for LX processes.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting sshd.socket.
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started Avahi DNS Configuration Daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started GENIVI DLT logging daemon.
[  OK  ] Started Getty on tty1.
         Starting IPv4 Packet Filtering Framework...
[  OK  ] Started Serial Getty on ttySTM8.
[  OK  ] Reached target Login Prompts.
         Starting SLCC Launcher Service...
         Starting SLCC Switcher Service to update SLCC Apps...
         Starting slot-mark-booted.service...
         Starting System Logger Daemon "default" instance...
[  OK  ] Started USB gadget.
[  OK  ] Reached target Hardware activated USB gadget.
[  OK  ] Started IPv4 Packet Filtering Framework.
[  OK  ] Started SLCC Switcher Service to update SLCC Apps.
[  OK  ] Started slot-mark-booted.service.
[  OK  ] Reached target Network (Pre).
[  OK  ] Reached target Network.
         Starting DNS forwarder and DHCP server...
         Starting Mosquitto MQTT v3.1/v3.1.1 Broker...
         Starting Network Time Service...
[   34.730403] using random self ethernet address
[   34.738545] using random host ethernet address
[  OK  ] Started Network Router Discovery Daemon.
         Starting Simple Network Maent Protocol (SNMP) Daemon....
[   34.864698] usb0: HOST MAC 5a:35:e4:ef:a2:d5
         Starting Simple Network Marotocol (SNMP) Trap Daemon....
[   34.892311] usb0: MAC 0a:51:72:b3:91:46
[   34.894741] dwc2 49000000.usb-otg: bound driver configfs-gadget
[  OK  ] Started Mosquitto MQTT v3.1/v3.1.1 Broker.
[  OK  ] Started System Logger Daemon "default" instance.
[  OK  ] Started Network Time Service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started DNS forwarder and DHCP server.
[  OK  ] Started Simple Network Man Protocol (SNMP) Trap Daemon..
[  OK  ] Started Simple Network Manement Protocol (SNMP) Daemon..
         Stopping Avahi mDNS/DNS-SD Stack...
         Stopping Avahi DNS Configuration Daemon...
[  OK  ] Stopped Avahi mDNS/DNS-SD Stack.
[  OK  ] Stopped Avahi DNS Configuration Daemon.
         Starting Avahi mDNS/DNS-SD Stack...
[  OK  ] Started Avahi DNS Configuration Daemon.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started SLCC Launcher Service.
[  OK  ] Reached target Multi-User System.
[  OK  ] Started Debug Logger Service.
         Starting LCC Pushpull Data Service...
         Starting watchdog keepalive daemon...
[  OK  ] Started watchdog keepalive daemon.


Lennox v1.0.13-446-gf5cfd4c s40-bigbend-v1 ttySTM8

s40-bigbend-v1 login: [   44.086236] can: controller area network core (rev 20170425 abi 9)
[   44.104179] NET: Registered protocol family 29
[   44.199050] can: raw protocol (rev 20170425)
[   46.632431] wlcore: using inverted interrupt logic: 2
[   46.730219] wlcore: PHY firmware version: Rev 8.2.0.0.246
[   46.861032] wlcore: firmware booted (Rev 8.9.1.0.2)
[   46.937502] m_can_platform 4400e000.can can0: bitrate error 0.0%
[   48.008898] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
[   49.544365] NET: Registered protocol family 17


s40-bigbend-v1 login: 

s40-bigbend-v1 login: root

Password: [   58.109599] wlcore: down
[   60.094447] wlcore: down

[   62.681619] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197
root@s40-bigbend-v1:~# cd /lcc/data/loh h gs/debug/
root@s40-bigbend-v1:/lcc/data/logs/debug# ls -al
total 884
drwxr-xr-x  2 root root   4096 Feb  6 05:58 .
drwxr-xr-x 25 root root   4096 Jan 27 01:24 ..
-rw-r--r--  1 root root     85 Feb  6 05:58 DEBG0000.tmp
-rw-r-----  1 root adm  890753 Feb  6 05:58 syslog.txt
root@s40-bigbend-v1:/lcc/data/logs/debug# rm * -[   92.681606] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
rf *
root@s40-bigbend-v1:/lcc/data/logs/debug# cd / ~
root@s40-bigbend-v1:~# systemctl stop launcher
Failed to stop launcher.service: Unit launcher.service not loaded.
root@s40-bigbend-v1:~# [  122.681623] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
systemctl stop launcher        l=  slcc_laumcher     nch[  152.681610] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197
er
root@s40-bigbend-v1:~# systemctl stop slcc_launcher
root@s40-bigbend-v1:~# ./2-wpa_suppl_sta_start.sh 
root@s40-bigbend-v1:~# Successfully initialized wpa_supplicant
[  181.092915] wlcore: using inverted interrupt logic: 2
[  181.150594] wlcore: PHY firmware version: Rev 8.2.0.0.246
[  181.391877] wlcore: firmware booted (Rev 8.9.1.0.2)
[  182.681610] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198

root@s40-bigbend-v1:~# 
root@s40-bigbend-v1:~# 
root@s40-bigbend-v1:~# cd /lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# ifconfig eth0 192.168.250.111
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# killall wfa_ca
wfa_ca: no process found
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# killall wfa_dut
wfa_dut: no process found
[  208.118333] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  208.127696] asix 1-1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# ./wfa_dut eth0 8000 &
[1] 2295
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# export WFA_ENV_AGENT_IPADDR=192.168.250.111
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# export WFA_ENV_AGENT_PORT=8000
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# ./wfa_ca eth0 9000 &
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmm_thread::begin while loop for each send/rcv before mutex lock
Mutex wait
wfa_wmmps_thread::wait...
[2] 2305
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# [  212.681605] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
new event 
accept new connection
new event 
status,RUNNING


message ca_get_version 

 17
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
ca_get_version
start xcCmdProcGetVersion ...
sent to DUT
entering agtCmdProcGetVersion ...
new event 
received from DUT
tag 1 
new event 
status,RUNNING


message device_get_info 

 18
last 0 last-1  0 last-2 a last-3 d

Inside the CLI huck block 

After File open 

Outside the new block 
device_get_info
entering device get info
Entering wfaDeviceGetInfo ...
sent to DUT
new event 
received from DUT
tag 28 
status,COMPLETE,firmware,


new event 
status,RUNNING


message device_list_interfaces,interfaceType,802.11 

 46
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
device_list_interfaces
interface type 1
sent to DUT
Entering wfaDeviceListIF ...
new event 
received from DUT
tag 29 
status,COMPLETE,interfaceType,802.11,interfaceID
wlan0
status,COMPLETE,interfaceType,802.11,interfaceID,wlan0


new event 
status,RUNNING


message sta_reset_default,interface,wlan0,Prog,WPA3,Type,DUT,runtime_id,1753398563 

 77
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_reset_default
sent to DUT
sh: myresetdefault: command not found
new event 
received from DUT
tag 46 
status,COMPLETE

 status,COMPLETE


[  242.681606] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  272.681604] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197
[  302.681605] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
new event 
status,RUNNING


message ca_get_version 

 17
last 0 last-1  74 last-2 6c last-3 75

Inside the CLI huck block 

After File open 

Outside the new block 
ca_get_version
start xcCmdProcGetVersion ...
sent to DUT
entering agtCmdProcGetVersion ...
new event 
received from DUT
tag 1 
new event 
status,RUNNING


message device_get_info 

 18
last 0 last-1  0 last-2 a last-3 d

Inside the CLI huck block 

After File open 

Outside the new block 
device_get_info
entering device get info
sent to DUT
Entering wfaDeviceGetInfo ...
new event 
received from DUT
tag 28 
status,COMPLETE,firmware,


new event 
status,RUNNING


message device_list_interfaces,interfaceType,802.11 

 46
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
device_list_interfaces
interface type 1
sent to DUT
Entering wfaDeviceListIF ...
new event 
received from DUT
tag 29 
status,COMPLETE,interfaceType,802.11,interfaceID
wlan0
status,COMPLETE,interfaceType,802.11,interfaceID,wlan0


new event 
status,RUNNING


message sta_reset_default,interface,wlan0,prog,WPA3,type,DUT 

 55
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_reset_default
sent to DUT
sh: myresetdefault: command not found
new event 
received from DUT
tag 46 
status,COMPLETE

 status,COMPLETE


new event 
status,RUNNING


message sta_set_ip_config,interface,wlan0,dhcp,0,ip,192.165.100.111,mask,255.255.0.0 

 79
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_set_ip_config
interface wlan0
dhcp 0
ip 192.165.100.111
mask 255.255.0.0
sent to DUT
entering wfaStaSetIpConfig ...
cp: cannot stat '/etc/resolv.conf': No such file or directory
new event 
received from DUT
tag 11 
status,COMPLETE

 status,COMPLETE


[  332.681606] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198

root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli -iwlan0 remove_network all
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli add_network
Selected interface 'wlan0'
0
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 ssid '"Wi-Fi-5.8.6_90"'
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 scan_ssid 1
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 sae_password '"12345678"'
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 key_mgmt SAE
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 auth_alg OPEN
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli set_network 0 ieee80211w 2
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wpa_cli enable_network 0
Selected interface 'wlan0'
OK
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# wlan0: SME: Tryin[  354.642622] wlan0: authenticate with 00:03:7f:12:17:8f
g to authenticate with 00:03:7f:[  354.650787] wlan0: send auth to 00:03:7f:12:17:8f (try 1/3)
12:17:8f (SSID='Wi-Fi-5.8.6_90' freq=5220 MHz)
wlan0: SME: Tryin[  354.773974] wlan0: authenticate with 00:03:7f:12:17:8f
[  354.778982] wlan0: send auth to 00:03:7f:12:17:8f (try 1/3)
g to authenticate with 00:03:7f:[  354.787874] wlan0: authenticated
12:17:8f (SSID='Wi-Fi-5.8.6_90' freq=5220 MHz)
wlan0: PMKSA-CACHE-ADDED 00:03:7f:12:17:8f[  354.798902] wlan0: associate with 00:03:7f:12:17:8f (try 1/3)
 0
wlan0: Trying to associate w[  354.807204] wlan0: RX AssocResp from 00:03:7f:12:17:8f (capab=0x511 status=0 aid=1)
ith 00:03:7f:12:17:8f (SSID='Wi-Fi-5.8.6_90' freq=5220 MHz)
[  354.822693] wlan0: associated
wlan0: Associated with 00:03:7f:12:17:8f
wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
wlan0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=US
[  354.879028] wlcore: Association completed.
wlan0: WPA: Key ne[  354.906939] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
gotiation completed with 00:03:7f:12:17:8f [PTK=CCMP GTK=CCMP]
wlan0: CTRL-EVENT-CONNECTED - Connection to 00:03:7f:12:17:8f completed [id=0 id_str=]

root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# new event 
status,RUNNING


message sta_get_ip_config,interface,wlan0 

 36
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_get_ip_config
Entering xcCmdProcStaGetIpConfig ...
interface wlan0
sent to DUT
new event 
received from DUT
[  362.681606] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
tag 10 
Entering wfaStaGetIpConfigResp ...
new event 
status,RUNNING


message sta_get_mac_address,interface,wlan0 

 38
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_get_mac_address
Entering xcCmdProcStaGetMacAddress ...
sent to DUT
Entering wfaStaGetMacAddress ...
new event 
received from DUT
tag 12 
Entering wfaStaGetMacAddressResp ...
unknown status
new event 
status,RUNNING


message sta_get_bssid,interface,wlan0 

 32
last 40 last-1  6c last-2 77 last-3 2c

Inside the CLI huck block 

After File open 

Outside the new block 
sta_get_bssid
Entering xcCmdProcStaGetBSSID ...
sent to DUT
Entering wfaStaGetBSSID ...
new event 
received from DUT
tag 16 
Entering wfaStaGetMacAddressResp ...
status,COMPLETE,bssid,00:03:7f:12:17:8f

[  392.681605] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  422.681606] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197
new event 
status,RUNNING


message sta_get_mac_address,interface,wlan0 

 38
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_get_mac_address
Entering xcCmdProcStaGetMacAddress ...
sent to DUT
Entering wfaStaGetMacAddress ...
new event 
received from DUT
tag 12 
Entering wfaStaGetMacAddressResp ...
unknown status
wlan0: WNM: Disassociation Imminent - Disassociation Timer 50
wlan0: WNM: Preferred List Available
[  452.681608] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  478.455101] wlcore: Beacon loss detected. roles:0x1
wlan0: CTRL-EVENT-BEACON-LOSS 
[  482.681604] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  483.288769] wlcore: Connection loss work (role_id: 0).
[  483.292468] wlan0: Connection to AP 00:03:7f:12:17:8f lost
wlan0: CTRL-EVENT-DISCONNECTED bssid=00:03:7f:12:17:8f reason=4 locally_generated=1
BSSID 00:03:7f:12:17:8f ignore list count incremented to 2, ignoring for 10 seconds
wlan0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
wlan0: CTRL-EVENT-REGDOM-CHANGE init=USER type=COUNTRY alpha2=US
[  512.681605] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  542.681604] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197
new event 
status,RUNNING


message sta_get_mac_address,interface,wlan0 

 38
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
sta_get_mac_address
Entering xcCmdProcStaGetMacAddress ...
sent to DUT
Entering wfaStaGetMacAddress ...
new event 
received from DUT
tag 12 
Entering wfaStaGetMacAddressResp ...
unknown status
new event 
status,RUNNING


message dev_upload_log,ftp_uname,anonymous,ftp_pwd,,ftp_port,2128,runtime_id,1753398563 

 82
last 0 last-1  0 last-2 0 last-3 0

Inside the CLI huck block 

After File open 

Outside the new block 
dev_upload_log
Command not valid, check the name
[  572.681603] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198

root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# ifconfig
can0: flags=193<UP,RUNNING,NOARP>  mtu 16  metric 1
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 10  (UNSPEC)
        RX packets 3  bytes 24 (24.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 50  

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500  metric 1
        inet 192.168.250.111  netmask 255.255.255.0  broadcast 192.168.250.255
        inet6 fe80::8eae:4cff:feba:17be  prefixlen 64  scopeid 0x20<link>
        ether 8c:ae:4c:ba:17:be  txqueuelen 1000  (Ethernet)
        RX packets 200  bytes 10211 (9.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 54  bytes 4289 (4.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536  metric 1
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 133  bytes 19334 (18.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 133  bytes 19334 (18.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500  metric 1
        inet 192.165.100.111  netmask 255.255.0.0  broadcast 192.165.255.255
        inet6 fdc7:4370:cc2a:0:661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x0<global>
        inet6 2001:db8:100:f101:661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x0<global>
        inet6 fd0e:993c:9d1d:0:661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x0<global>
        inet6 fe80::661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x20<link>
        inet6 fd19:b28f:9007:0:661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x0<global>
        inet6 fd18:401:85a3:0:661c:10ff:fe36:2dab  prefixlen 64  scopeid 0x0<global>
        ether 64:1c:10:36:2d:ab  txqueuelen 1000  (Ethernet)
        RX packets 268  bytes 44524 (43.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 256  bytes 49385 (48.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# [  602.681602] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
journalctl | grep -i wpa_supplicant
Feb 06 05:58:16 s40-bigbend-v1 [730]: debug : NWmgr:NWmgr:State disconnected 1 /fi/w1/wpa_supplicant1/Interfaces/0
Feb 06 05:58:21 s40-bigbend-v1 [730]: info : NWmgr:NWmgr:dbus_interface_wd_path /fi/w1/wpa_supplicant1/Interfaces/0
Feb 06 05:58:21 s40-bigbend-v1 wpa_supplicant[969]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Feb 06 05:58:21 s40-bigbend-v1 [730]: notice : NWmgr:NWmgr:wpa_supplicant stopped 969
Feb 06 05:58:21 s40-bigbend-v1 wpa_supplicant[969]: p2p-dev-wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Feb 06 05:58:21 s40-bigbend-v1 wpa_supplicant[969]: nl80211: deinit ifname=p2p-dev-wlan0 disabled_11b_rates=0
Feb 06 05:58:22 s40-bigbend-v1 wpa_supplicant[969]: p2p-dev-wlan0: CTRL-EVENT-TERMINATING
Feb 06 05:58:22 s40-bigbend-v1 wpa_supplicant[969]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Feb 06 05:58:22 s40-bigbend-v1 wpa_supplicant[969]: wlan0: CTRL-EVENT-DSCP-POLICY clear_all
Feb 06 05:58:22 s40-bigbend-v1 wpa_supplicant[969]: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Feb 06 05:58:22 s40-bigbend-v1 wpa_supplicant[969]: wlan0: CTRL-EVENT-TERMINATING
Feb 06 05:58:23 s40-bigbend-v1 [730]: info : NWmgr:NWmgr:mq_receive: retval: 109 , msg: {"nmDbusNotifications":{"objPath":"\/fi\/w1\/wpa_supplicant1\/Interfaces\/0","signalType":"networkRemoved"}}
Feb 06 06:02:27 s40-bigbend-v1 lx_task_manager.sh[2344]: pidFdCount: 7 wpa_supplicant 2288
Feb 06 06:02:27 s40-bigbend-v1 lx_task_manager.sh[2350]:         `-wpa_supplicant
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# cat /lnew event 
cc/[  632.681600] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
data/wpa_supplicant.conf 
##### Example wpa_supplicant configuration file ###############################

#

# This file describes configuration file format and lists all available option.

# Please also take a look at simpler configuration examples in 'examples'

# subdirectory.

#

# Empty lines and lines starting with # are ignored



# NOTE! This file may contain password information and should probably be made

# readable only by root user on multiuser systems.



# Note: All file paths in this configuration file should use full (absolute,

# not relative to working directory) path in order to allow working directory

# to be changed. This can happen if wpa_supplicant is run in the background.



# Whether to allow wpa_supplicant to update (overwrite) configuration

#

# This option can be used to allow wpa_supplicant to overwrite configuration

# file whenever configuration is changed (e.g., new network block is added with

# wpa_cli or wpa_gui, or a password is changed). This is required for

# wpa_cli/wpa_gui to be able to store the configuration changes permanently.

# Please note that overwriting configuration file will remove the comments from

# it.

update_config=1



# global configuration (shared by all network blocks)

#

# Parameters for the control interface. If this is specified, wpa_supplicant

# will open a control interface that is available for external programs to

# manage wpa_supplicant. The meaning of this string depends on which control

# interface mechanism is used. For all cases, the existence of this parameter

# in configuration is used to determine whether the control interface is

# enabled.

#

# For UNIX domain sockets (default on Linux and BSD): This is a directory that

# will be created for UNIX domain sockets for listening to requests from

# external programs (CLI/GUI, etc.) for status information and configuration.

# The socket file will be named based on the interface name, so multiple

# wpa_supplicant processes can be run at the same time if more than one

# interface is used.

# /var/run/wpa_supplicant is the recommended directory for sockets and by

# default, wpa_cli will use it when trying to connect with wpa_supplicant.

#

# Access control for the control interface can be configured by setting the

# directory to allow only members of a group to use sockets. This way, it is

# possible to run wpa_supplicant as root (since it needs to change network

# configuration and open raw sockets) and still allow GUI/CLI components to be

# run as non-root users. However, since the control interface can be used to

# change the network configuration, this access needs to be protected in many

# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you

# want to allow non-root users to use the control interface, add a new group

# and change this value to match with that group. Add users that should have

# control interface access to this group. If this variable is commented out or

# not included in the configuration file, group will not be changed from the

# value it got by default when the directory or socket was created.

#

# When configuring both the directory and group, use following format:

# DIR=/var/run/wpa_supplicant GROUP=wheel

# DIR=/var/run/wpa_supplicant GROUP=0

# (group can be either group name or gid)

#

# For UDP connections (default on Windows): The value will be ignored. This

# variable is just used to select that the control interface is to be created.

# The value can be set to, e.g., udp (ctrl_interface=udp)

#

# For Windows Named Pipe: This value can be used to set the security descriptor

# for controlling access to the control interface. Security descriptor can be

# set using Security Descriptor String Format (see http://msdn.microsoft.com/

# library/default.asp?url=/library/en-us/secauthz/security/

# security_descriptor_string_format.asp). The descriptor string needs to be

# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty

# DACL (which will reject all connections). See README-Windows.txt for more

# information about SDDL string format.

#

ctrl_interface=/var/run/wpa_supplicant



# IEEE 802.1X/EAPOL version

# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines

# EAPOL version 2. However, there are many APs that do not handle the new

# version number correctly (they seem to drop the frames completely). In order

# to make wpa_supplicant interoperate with these APs, the version number is set

# to 1 by default. This configuration value can be used to set it to the new

# version (2).

# Note: When using MACsec, eapol_version shall be set to 3, which is

# defined in IEEE Std 802.1X-2010.

eapol_version=1



# AP scanning/selection

# By default, wpa_supplicant requests driver to perform AP scanning and then

# uses the scan results to select a suitable AP. Another alternative is to

# allow the driver to take care of AP scanning and selection and use

# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association

# information from the driver.

# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to

#    the currently enabled networks are found, a new network (IBSS or AP mode

#    operation) may be initialized (if configured) (default)

# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association

#    parameters (e.g., WPA IE generation); this mode can also be used with

#    non-WPA drivers when using IEEE 802.1X mode; do not try to associate with

#    APs (i.e., external program needs to control association). This mode must

#    also be used when using wired Ethernet drivers.

#    Note: macsec_qca driver is one type of Ethernet driver which implements

#    macsec feature.

# 2: like 0, but associate with APs using security policy and SSID (but not

#    BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to

#    enable operation with hidden SSIDs and optimized roaming; in this mode,

#    the network blocks in the configuration file are tried one by one until

#    the driver reports successful association; each network block should have

#    explicit security policy (i.e., only one option in the lists) for

#    key_mgmt, pairwise, group, proto variables

# Note: ap_scan=2 should not be used with the nl80211 driver interface (the

# current Linux interface). ap_scan=1 is optimized work working with nl80211.

# For finding networks using hidden SSID, scan_ssid=1 in the network block can

# be used with nl80211.

# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be

# created immediately regardless of scan results. ap_scan=1 mode will first try

# to scan for existing networks and only if no matches with the enabled

# networks are found, a new IBSS or AP mode network is created.

ap_scan=1



# Whether to force passive scan for network connection

#

# By default, scans will send out Probe Request frames on channels that allow

# active scanning. This advertise the local station to the world. Normally this

# is fine, but users may wish to do passive scanning where the radio should only

# listen quietly for Beacon frames and not send any Probe Request frames. Actual

# functionality may be driver dependent.

#

# This parameter can be used to force only passive scanning to be used

# for network connection cases. It should be noted that this will slow

# down scan operations and reduce likelihood of finding the AP. In

# addition, some use cases will override this due to functional

# requirements, e.g., for finding an AP that uses hidden SSID

# (scan_ssid=1) or P2P device discovery.

#

# 0:  Do normal scans (allow active scans) (default)

# 1:  Do passive scans.

#passive_scan=0



# MPM residency

# By default, wpa_supplicant implements the mesh peering manager (MPM) for an

# open mesh. However, if the driver can implement the MPM, you may set this to

# 0 to use the driver version. When AMPE is enabled, the wpa_supplicant MPM is

# always used.

# 0: MPM lives in the driver

# 1: wpa_supplicant provides an MPM which handles peering (default)

#user_mpm=1



# Maximum number of peer links (0-255; default: 99)

# Maximum number of mesh peering currently maintained by the STA.

#max_peer_links=99



# Timeout in seconds to detect STA inactivity (default: 300 seconds)

#

# This timeout value is used in mesh STA to clean up inactive stations.

#mesh_max_inactivity=300



# cert_in_cb - Whether to include a peer certificate dump in events

# This controls whether peer certificates for authentication server and

# its certificate chain are included in EAP peer certificate events. This is

# enabled by default.

#cert_in_cb=1



# EAP fast re-authentication

# By default, fast re-authentication is enabled for all EAP methods that

# support it. This variable can be used to disable fast re-authentication.

# Normally, there is no need to disable this.

fast_reauth=1



# OpenSSL Engine support

# These options can be used to load OpenSSL engines.

# The two engines that are supported currently are shown below:

# They are both from the opensc project (http://www.opensc.org/)

# By default no engines are loaded.

# make the opensc engine available

#opensc_engine_path=/usr/lib/opensc/engine_opensc.so

# make the pkcs11 engine available

#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so

# configure the path to the pkcs11 module required by the pkcs11 engine

#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so



# OpenSSL cipher string

#

# This is an OpenSSL specific configuration option for configuring the default

# ciphers. If not set, "DEFAULT:!EXP:!LOW" is used as the default.

# See https://www.openssl.org/docs/apps/ciphers.html for OpenSSL documentation

# on cipher suite configuration. This is applicable only if wpa_supplicant is

# built to use OpenSSL.

#openssl_ciphers=DEFAULT:!EXP:!LOW





# Dynamic EAP methods

# If EAP methods were built dynamically as shared object files, they need to be

# loaded here before being used in the network blocks. By default, EAP methods

# are included statically in the build, so these lines are not needed

#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so

#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so



# Driver interface parameters

# This field can be used to configure arbitrary driver interace parameters. The

# format is specific to the selected driver interface. This field is not used

# in most cases.

#driver_param="field=value"



# Country code

# The ISO/IEC alpha2 country code for the country in which this device is

# currently operating.

country=US



# Maximum lifetime for PMKSA in seconds; default 43200

#dot11RSNAConfigPMKLifetime=43200

# Threshold for reauthentication (percentage of PMK lifetime); default 70

#dot11RSNAConfigPMKReauthThreshold=70

# Timeout for security association negotiation in seconds; default 60

#dot11RSNAConfigSATimeout=60



# Wi-Fi Protected Setup (WPS) parameters



# Universally Unique IDentifier (UUID; see RFC 4122) of the device

# If not configured, UUID will be generated based on the local MAC address.

#uuid=12345678-9abc-def0-1234-56789abcdef0



# Device Name

# User-friendly description of device; up to 32 octets encoded in UTF-8

device_name=Sitara



# Manufacturer

# The manufacturer of the device (up to 64 ASCII characters)

manufacturer=TI



# Model Name

# Model of the device (up to 32 ASCII characters)

model_name=Wilink



# Model Number

# Additional device description (up to 32 ASCII characters)

model_number=wl18xx



# Serial Number

# Serial number of the device (up to 32 characters)

serial_number=12345



# Primary Device Type

# Used format: <categ>-<OUI>-<subcateg>

# categ = Category as an integer value

# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for

#       default WPS OUI

# subcateg = OUI-specific Sub Category as an integer value

# Examples:

#   1-0050F204-1 (Computer / PC)

#   1-0050F204-2 (Computer / Server)

#   5-0050F204-1 (Storage / NAS)

#   6-0050F204-1 (Network Infrastructure / AP)

#device_type=1-0050F204-1



# OS Version

# 4-octet operating system version number (hex string)

#os_version=01020300



# Config Methods

# List of the supported configuration methods

# Available methods: usba ethernet label display ext_nfc_token int_nfc_token

#nfc_interface push_button keypad virtual_display physical_display

#virtual_push_button physical_push_button

# For WSC 1.0:

#config_methods=label display push_button keypad

# For WSC 2.0:

config_methods=virtual_display virtual_push_button keypad



# Credential processing

#   0 = process received credentials internally (default)

#   1 = do not process received credentials; just pass them over ctrl_iface to

#external program(s)

#   2 = process received credentials internally and pass them over ctrl_iface

#to external program(s)

#wps_cred_processing=0



# Vendor attribute in WPS M1, e.g., Windows 7 Vertical Pairing

# The vendor attribute contents to be added in M1 (hex string)

#wps_vendor_ext_m1=000137100100020001



# NFC password token for WPS

# These parameters can be used to configure a fixed NFC password token for the

# station. This can be generated, e.g., with nfc_pw_token. When these

# parameters are used, the station is assumed to be deployed with a NFC tag

# that includes the matching NFC password token (e.g., written based on the

# NDEF record from nfc_pw_token).

#

#wps_nfc_dev_pw_id: Device Password ID (16..65535)

#wps_nfc_dh_pubkey: Hexdump of DH Public Key

#wps_nfc_dh_privkey: Hexdump of DH Private Key

#wps_nfc_dev_pw: Hexdump of Device Password



# Priority for the networks added through WPS

# This priority value will be set to each network profile that is added

# by executing the WPS protocol.

#wps_priority=0



# Maximum number of BSS entries to keep in memory

# Default: 200

# This can be used to limit memory use on the BSS entries (cached scan

# results). A larger value may be needed in environments that have huge number

# of APs when using ap_scan=1 mode.

#bss_max_count=200



# Automatic scan

# This is an optional set of parameters for automatic scanning

# within an interface in following format:

#autoscan=<autoscan module name>:<module parameters>

# autoscan is like bgscan but on disconnected or inactive state.

# For instance, on exponential module parameters would be <base>:<limit>

#autoscan=exponential:3:300

# Which means a delay between scans on a base exponential of 3,

# up to the limit of 300 seconds (3, 9, 27 ... 300)

# For periodic module, parameters would be <fixed interval>

#autoscan=periodic:30

# So a delay of 30 seconds will be applied between each scan



# filter_ssids - SSID-based scan result filtering

# 0 = do not filter scan results (default)

# 1 = only include configured SSIDs in scan results/BSS table

#filter_ssids=0



# Password (and passphrase, etc.) backend for external storage

# format: <backend name>[:<optional backend parameters>]

#ext_password_backend=test:pw1=password|pw2=testing





# Disable P2P functionality

# p2p_disabled=1



# Timeout in seconds to detect STA inactivity (default: 300 seconds)

#

# This timeout value is used in P2P GO mode to clean up

# inactive stations.

#p2p_go_max_inactivity=300

p2p_go_ht40=1

p2p_ignore_shared_freq=1

disassoc_low_ack=1

p2p_go_ht40=1

p2p_ignore_shared_freq=1

disassoc_low_ack=1



# Passphrase length (8..63) for P2P GO

#

# This parameter controls the length of the random passphrase that is

# generated at the GO. Default: 8.

#p2p_passphrase_len=8



# Extra delay between concurrent P2P search iterations

#

# This value adds extra delay in milliseconds between concurrent search

# iterations to make p2p_find friendlier to concurrent operations by avoiding

# it from taking 100% of radio resources. The default value is 500 ms.

#p2p_search_delay=500



# Opportunistic Key Caching (also known as Proactive Key Caching) default

# This parameter can be used to set the default behavior for the

# proactive_key_caching parameter. By default, OKC is disabled unless enabled

# with the global okc=1 parameter or with the per-network

# proactive_key_caching=1 parameter. With okc=1, OKC is enabled by default, but

# can be disabled with per-network proactive_key_caching=0 parameter.

#okc=0



# Protected Management Frames default

# This parameter can be used to set the default behavior for the ieee80211w

# parameter. By default, PMF is disabled unless enabled with the global pmf=1/2

# parameter or with the per-network ieee80211w=1/2 parameter. With pmf=1/2, PMF

# is enabled/required by default, but can be disabled with the per-network

# ieee80211w parameter.

#pmf=0



# Enabled SAE finite cyclic groups in preference order

# By default (if this parameter is not set), the mandatory group 19 (ECC group

# defined over a 256-bit prime order field) is preferred, but other groups are

# also enabled. If this parameter is set, the groups will be tried in the

# indicated order. The group values are listed in the IANA registry:

# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9

#sae_groups=21 20 19 26 25



# Default value for DTIM period (if not overridden in network block)

#dtim_period=2



# Default value for Beacon interval (if not overridden in network block)

#beacon_int=100



# Additional vendor specific elements for Beacon and Probe Response frames

# This parameter can be used to add additional vendor specific element(s) into

# the end of the Beacon and Probe Response frames. The format for these

# element(s) is a hexdump of the raw information elements (id+len+payload for

# one or more elements). This is used in AP and P2P GO modes.

#ap_vendor_elements=dd0411223301



# Ignore scan results older than request

#

# The driver may have a cache of scan results that makes it return

# information that is older than our scan trigger. This parameter can

# be used to configure such old information to be ignored instead of

# allowing it to update the internal BSS table.

#ignore_old_scan_res=0



# scan_cur_freq: Whether to scan only the current frequency

# 0:  Scan all available frequencies. (Default)

# 1:  Scan current operating frequency if another VIF on the same radio

#     is already associated.



# MAC address policy default

# 0 = use permanent MAC address

# 1 = use random MAC address for each ESS connection

# 2 = like 1, but maintain OUI (with local admin bit set)

#

# By default, permanent MAC address is used unless policy is changed by

# the per-network mac_addr parameter. Global mac_addr=1 can be used to

# change this default behavior.

#mac_addr=0



# Lifetime of random MAC address in seconds (default: 60)

#rand_addr_lifetime=60



# MAC address policy for pre-association operations (scanning, ANQP)

# 0 = use permanent MAC address

# 1 = use random MAC address

# 2 = like 1, but maintain OUI (with local admin bit set)

#preassoc_mac_addr=0



# Interworking (IEEE 802.11u)



# Enable Interworking

# interworking=1



# Homogenous ESS identifier

# If this is set, scans will be used to request response only from BSSes

# belonging to the specified Homogeneous ESS. This is used only if interworking

# is enabled.

# hessid=00:11:22:33:44:55



# Automatic network selection behavior

# 0 = do not automatically go through Interworking network selection

#     (i.e., require explicit interworking_select command for this; default)

# 1 = perform Interworking network selection if one or more

#     credentials have been configured and scan did not find a

#     matching network block

#auto_interworking=0



# credential block

#

# Each credential used for automatic network selection is configured as a set

# of parameters that are compared to the information advertised by the APs when

# interworking_select and interworking_connect commands are used.

#

# credential fields:

#

# temporary: Whether this credential is temporary and not to be saved

#

# priority: Priority group

#By default, all networks and credentials get the same priority group

#(0). This field can be used to give higher priority for credentials

#(and similarly in struct wpa_ssid for network blocks) to change the

#Interworking automatic networking selection behavior. The matching

#network (based on either an enabled network block or a credential)

#with the highest priority value will be selected.

#

# pcsc: Use PC/SC and SIM/USIM card

#

# realm: Home Realm for Interworking

#

# username: Username for Interworking network selection

#

# password: Password for Interworking network selection

#

# ca_cert: CA certificate for Interworking network selection

#

# client_cert: File path to client certificate file (PEM/DER)

#This field is used with Interworking networking selection for a case

#where client certificate/private key is used for authentication

#(EAP-TLS). Full path to the file should be used since working

#directory may change when wpa_supplicant is run in the background.

#

#Alternatively, a named configuration blob can be used by setting

#this to blob://blob_name.

#

# private_key: File path to client private key file (PEM/DER/PFX)

#When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be

#commented out. Both the private key and certificate will be read

#from the PKCS#12 file in this case. Full path to the file should be

#used since working directory may change when wpa_supplicant is run

#in the background.

#

#Windows certificate store can be used by leaving client_cert out and

#configuring private_key in one of the following formats:

#

#cert://substring_to_match

#

#hash://certificate_thumbprint_in_hex

#

#For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"

#

#Note that when running wpa_supplicant as an application, the user

#certificate store (My user account) is used, whereas computer store

#(Computer account) is used when running wpasvc as a service.

#

#Alternatively, a named configuration blob can be used by setting

#this to blob://blob_name.

#

# private_key_passwd: Password for private key file

#

# imsi: IMSI in <MCC> | <MNC> | '-' | <MSIN> format

#

# milenage: Milenage parameters for SIM/USIM simulator in <Ki>:<OPc>:<SQN>

#format

#

# domain: Home service provider FQDN(s)

#This is used to compare against the Domain Name List to figure out

#whether the AP is operated by the Home SP. Multiple domain entries can

#be used to configure alternative FQDNs that will be considered home

#networks.

#

# roaming_consortium: Roaming Consortium OI

#If roaming_consortium_len is non-zero, this field contains the

#Roaming Consortium OI that can be used to determine which access

#points support authentication with this credential. This is an

#alternative to the use of the realm parameter. When using Roaming

#Consortium to match the network, the EAP parameters need to be

#pre-configured with the credential since the NAI Realm information

#may not be available or fetched.

#

# eap: Pre-configured EAP method

#This optional field can be used to specify which EAP method will be

#used with this credential. If not set, the EAP method is selected

#automatically based on ANQP information (e.g., NAI Realm).

#

# phase1: Pre-configure Phase 1 (outer authentication) parameters

#This optional field is used with like the 'eap' parameter.

#

# phase2: Pre-configure Phase 2 (inner authentication) parameters

#This optional field is used with like the 'eap' parameter.

#

# excluded_ssid: Excluded SSID

#This optional field can be used to excluded specific SSID(s) from

#matching with the network. Multiple entries can be used to specify more

#than one SSID.

#

# roaming_partner: Roaming partner information

#This optional field can be used to configure preferences between roaming

#partners. The field is a string in following format:

#<FQDN>,<0/1 exact match>,<priority>,<* or country code>

#(non-exact match means any subdomain matches the entry; priority is in

#0..255 range with 0 being the highest priority)

#

# update_identifier: PPS MO ID

#(Hotspot 2.0 PerProviderSubscription/UpdateIdentifier)

#

# provisioning_sp: FQDN of the SP that provisioned the credential

#This optional field can be used to keep track of the SP that provisioned

#the credential to find the PPS MO (./Wi-Fi/<provisioning_sp>).

#

# Minimum backhaul threshold (PPS/<X+>/Policy/MinBackhauldThreshold/*)

#These fields can be used to specify minimum download/upload backhaul

#bandwidth that is preferred for the credential. This constraint is

#ignored if the AP does not advertise WAN Metrics information or if the

#limit would prevent any connection. Values are in kilobits per second.

# min_dl_bandwidth_home

# min_ul_bandwidth_home

# min_dl_bandwidth_roaming

# min_ul_bandwidth_roaming

#

# max_bss_load: Maximum BSS Load Channel Utilization (1..255)

#(PPS/<X+>/Policy/MaximumBSSLoadValue)

#This value is used as the maximum channel utilization for network

#selection purposes for home networks. If the AP does not advertise

#BSS Load or if the limit would prevent any connection, this constraint

#will be ignored.

#

# req_conn_capab: Required connection capability

#(PPS/<X+>/Policy/RequiredProtoPortTuple)

#This value is used to configure set of required protocol/port pairs that

#a roaming network shall support (include explicitly in Connection

#Capability ANQP element). This constraint is ignored if the AP does not

#advertise Connection Capability or if this constraint would prevent any

#network connection. This policy is not used in home networks.

#Format: <protocol>[:<comma-separated list of ports]

#Multiple entries can be used to list multiple requirements.

#For example, number of common TCP protocols:

#req_conn_capab=6,22,80,443

#For example, IPSec/IKE:

#req_conn_capab=17:500

#req_conn_capab=50

#

# ocsp: Whether to use/require OCSP to check server certificate

#0 = do not use OCSP stapling (TLS certificate status extension)

#1 = try to use OCSP stapling, but not require response

#2 = require valid OCSP stapling response

#

# sim_num: Identifier for which SIM to use in multi-SIM devices

#

# for example:

#

#cred={

#realm="example.com"

#username="user@example.com"

#password="password"

#ca_cert="/etc/wpa_supplicant/ca.pem"

#domain="example.com"

#}

#

#cred={

#imsi="310026-000000000"

#milenage="90dca4eda45b53cf0f12d7c9c3bc6a89:cb9cccc4b9258e6dca4760379fb82"

#}

#

#cred={

#realm="example.com"

#username="user"

#password="password"

#ca_cert="/etc/wpa_supplicant/ca.pem"

#domain="example.com"

#roaming_consortium=223344

#eap=TTLS

#phase2="auth=MSCHAPV2"

#}



# Hotspot 2.0

# hs20=1



# network block

#

# Each network (usually AP's sharing the same SSID) is configured as a separate

# block in this configuration file. The network blocks are in preference order

# (the first match is used).

#

# network block fields:

#

# disabled:

#0 = this network can be used (default)

#1 = this network block is disabled (can be enabled through ctrl_iface,

#    e.g., with wpa_cli or wpa_gui)

#

# id_str: Network identifier string for external scripts. This value is passed

#to external action script through wpa_cli as WPA_ID_STR environment

#variable to make it easier to do network specific configuration.

#

# ssid: SSID (mandatory); network name in one of the optional formats:

#- an ASCII string with double quotation

#- a hex string (two characters per octet of SSID)

#- a printf-escaped ASCII string P"<escaped string>"

#

# scan_ssid:

#0 = do not scan this SSID with specific Probe Request frames (default)

#1 = scan with SSID-specific Probe Request frames (this can be used to

#    find APs that do not accept broadcast SSID or use multiple SSIDs;

#    this will add latency to scanning, so enable this only when needed)

#

# bssid: BSSID (optional); if set, this network block is used only when

#associating with the AP using the configured BSSID

#

# priority: priority group (integer)

# By default, all networks will get same priority group (0). If some of the

# networks are more desirable, this field can be used to change the order in

# which wpa_supplicant goes through the networks when selecting a BSS. The

# priority groups will be iterated in decreasing priority (i.e., the larger the

# priority value, the sooner the network is matched against the scan results).

# Within each priority group, networks will be selected based on security

# policy, signal strength, etc.

# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not

# using this priority to select the order for scanning. Instead, they try the

# networks in the order that used in the configuration file.

#

# mode: IEEE 802.11 operation mode

# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)

# 1 = IBSS (ad-hoc, peer-to-peer)

# 2 = AP (access point)

# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) and

# WPA-PSK (with proto=RSN). In addition, key_mgmt=WPA-NONE (fixed group key

# TKIP/CCMP) is available for backwards compatibility, but its use is

# deprecated. WPA-None requires following network block options:

# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not

# both), and psk must also be set.

#

# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g.,

# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial

# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode.

# In addition, this value is only used by the station that creates the IBSS. If

# an IBSS network with the configured SSID is already present, the frequency of

# the network will be used instead of this configured value.

#

# scan_freq: List of frequencies to scan

# Space-separated list of frequencies in MHz to scan when searching for this

# BSS. If the subset of channels used by the network is known, this option can

# be used to optimize scanning to not occur on channels that the network does

# not use. Example: scan_freq=2412 2437 2462

#

# freq_list: Array of allowed frequencies

# Space-separated list of frequencies in MHz to allow for selecting the BSS. If

# set, scan results that do not match any of the specified frequencies are not

# considered when selecting a BSS.

#

# This can also be set on the outside of the network block. In this case,

# it limits the frequencies that will be scanned.

#

# bgscan: Background scanning

# wpa_supplicant behavior for background scanning can be specified by

# configuring a bgscan module. These modules are responsible for requesting

# background scans for the purpose of roaming within an ESS (i.e., within a

# single network block with all the APs using the same SSID). The bgscan

# parameter uses following format: "<bgscan module name>:<module parameters>"

# Following bgscan modules are available:

# simple - Periodic background scans based on signal strength

# bgscan="simple:<short bgscan interval in seconds>:<signal strength threshold>:

# <long interval>"

# bgscan="simple:30:-45:300"

# learn - Learn channels used by the network and try to avoid bgscans on other

# channels (experimental)

# bgscan="learn:<short bgscan interval in seconds>:<signal strength threshold>:

# <long interval>[:<database file name>]"

# bgscan="learn:30:-45:300:/etc/wpa_supplicant/network1.bgscan"

# Explicitly disable bgscan by setting

# bgscan=""

#

# This option can also be set outside of all network blocks for the bgscan

# parameter to apply for all the networks that have no specific bgscan

# parameter.

#

# proto: list of accepted protocols

# WPA = WPA/IEEE 802.11i/D3.0

# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)

# If not set, this defaults to: WPA RSN

#

# key_mgmt: list of accepted authenticated key management protocols

# WPA-PSK = WPA pre-shared key (this requires 'psk' field)

# WPA-EAP = WPA using EAP authentication

# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically

#generated WEP keys

# NONE = WPA is not used; plaintext or static WEP could be used

# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms

# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms

# If not set, this defaults to: WPA-PSK WPA-EAP

#

# ieee80211w: whether management frame protection is enabled

# 0 = disabled (default unless changed with the global pmf parameter)

# 1 = optional

# 2 = required

# The most common configuration options for this based on the PMF (protected

# management frames) certification program are:

# PMF enabled: ieee80211w=1 and key_mgmt=WPA-EAP WPA-EAP-SHA256

# PMF required: ieee80211w=2 and key_mgmt=WPA-EAP-SHA256

# (and similarly for WPA-PSK and WPA-WPSK-SHA256 if WPA2-Personal is used)

#

# auth_alg: list of allowed IEEE 802.11 authentication algorithms

# OPEN = Open System authentication (required for WPA/WPA2)

# SHARED = Shared Key authentication (requires static WEP keys)

# LEAP = LEAP/Network EAP (only used with LEAP)

# If not set, automatic selection is used (Open System with LEAP enabled if

# LEAP is allowed as one of the EAP methods).

#

# pairwise: list of accepted pairwise (unicast) ciphers for WPA

# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]

# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]

# NONE = Use only Group Keys (deprecated, should not be included if APs support

#pairwise keys)

# If not set, this defaults to: CCMP TKIP

#

# group: list of accepted group (broadcast/multicast) ciphers for WPA

# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]

# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]

# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key

# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]

# If not set, this defaults to: CCMP TKIP WEP104 WEP40

#

# psk: WPA preshared key; 256-bit pre-shared key

# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,

# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be

# generated using the passphrase and SSID). ASCII passphrase must be between

# 8 and 63 characters (inclusive). ext:<name of external PSK field> format can

# be used to indicate that the PSK/passphrase is stored in external storage.

# This field is not needed, if WPA-EAP is used.

# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys

# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant

# startup and reconfiguration time can be optimized by generating the PSK only

# only when the passphrase or SSID has actually changed.

#

# mem_only_psk: Whether to keep PSK/passphrase only in memory

# 0 = allow psk/passphrase to be stored to the configuration file

# 1 = do not store psk/passphrase to the configuration file

#mem_only_psk=0

#

# eapol_flags: IEEE 802.1X/EAPOL options (bit field)

# Dynamic WEP key required for non-WPA mode

# bit0 (1): require dynamically generated unicast WEP key

# bit1 (2): require dynamically generated broadcast WEP key

# (3 = require both keys; default)

# Note: When using wired authentication (including macsec_qca driver),

# eapol_flags must be set to 0 for the authentication to be completed

# successfully.

#

# macsec_policy: IEEE 802.1X/MACsec options

# This determines how sessions are secured with MACsec. It is currently

# applicable only when using the macsec_qca driver interface.

# 0: MACsec not in use (default)

# 1: MACsec enabled - Should secure, accept key server's advice to

#    determine whether to use a secure session or not.

#

# mixed_cell: This option can be used to configure whether so called mixed

# cells, i.e., networks that use both plaintext and encryption in the same

# SSID, are allowed when selecting a BSS from scan results.

# 0 = disabled (default)

# 1 = enabled

#

# proactive_key_caching:

# Enable/disable opportunistic PMKSA caching for WPA2.

# 0 = disabled (default unless changed with the global okc parameter)

# 1 = enabled

#

# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or

# hex without quotation, e.g., 0102030405)

# wep_tx_keyidx: Default WEP key index (TX) (0..3)

#

# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is

# allowed. This is only used with RSN/WPA2.

# 0 = disabled (default)

# 1 = enabled

#peerkey=1

#

# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to

# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies.

#

# Following fields are only used with internal EAP implementation.

# eap: space-separated list of accepted EAP methods

#MD5 = EAP-MD5 (unsecure and does not generate keying material ->

#cannot be used with WPA; to be used as a Phase 2 method

#with EAP-PEAP or EAP-TTLS)

#       MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used

#as a Phase 2 method with EAP-PEAP or EAP-TTLS)

#       OTP = EAP-OTP (cannot be used separately with WPA; to be used

#as a Phase 2 method with EAP-PEAP or EAP-TTLS)

#       GTC = EAP-GTC (cannot be used separately with WPA; to be used

#as a Phase 2 method with EAP-PEAP or EAP-TTLS)

#TLS = EAP-TLS (client and server certificate)

#PEAP = EAP-PEAP (with tunnelled EAP authentication)

#TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2

# authentication)

#If not set, all compiled in methods are allowed.

#

# identity: Identity string for EAP

#This field is also used to configure user NAI for

#EAP-PSK/PAX/SAKE/GPSK.

# anonymous_identity: Anonymous identity string for EAP (to be used as the

#unencrypted identity with EAP types that support different tunnelled

#identity, e.g., EAP-TTLS). This field can also be used with

#EAP-SIM/AKA/AKA' to store the pseudonym identity.

# password: Password string for EAP. This field can include either the

#plaintext password (using ASCII or hex string) or a NtPasswordHash

#(16-byte MD4 hash of password) in hash:<32 hex digits> format.

#NtPasswordHash can only be used when the password is for MSCHAPv2 or

#MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).

#EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit

#PSK) is also configured using this field. For EAP-GPSK, this is a

#variable length PSK. ext:<name of external password field> format can

#be used to indicate that the password is stored in external storage.

# ca_cert: File path to CA certificate file (PEM/DER). This file can have one

#or more trusted CA certificates. If ca_cert and ca_path are not

#included, server certificate will not be verified. This is insecure and

#a trusted CA certificate should always be configured when using

#EAP-TLS/TTLS/PEAP. Full path should be used since working directory may

#change when wpa_supplicant is run in the background.

#

#Alternatively, this can be used to only perform matching of the server

#certificate (SHA-256 hash of the DER encoded X.509 certificate). In

#this case, the possible CA certificates in the server certificate chain

#are ignored and only the server certificate is verified. This is

#configured with the following format:

#hash:://server/sha256/cert_hash_in_hex

#For example: "hash://server/sha256/

#5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"

#

#On Windows, trusted CA certificates can be loaded from the system

#certificate store by setting this to cert_store://<name>, e.g.,

#ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".

#Note that when running wpa_supplicant as an application, the user

#certificate store (My user account) is used, whereas computer store

#(Computer account) is used when running wpasvc as a service.

# ca_path: Directory path for CA certificate files (PEM). This path may

#contain multiple CA certificates in OpenSSL format. Common use for this

#is to point to system trusted CA list which is often installed into

#directory like /etc/ssl/certs. If configured, these certificates are

#added to the list of trusted CAs. ca_cert may also be included in that

#case, but it is not required.

# client_cert: File path to client certificate file (PEM/DER)

#Full path should be used since working directory may change when

#wpa_supplicant is run in the background.

#Alternatively, a named configuration blob can be used by setting this

#to blob://<blob name>.

# private_key: File path to client private key file (PEM/DER/PFX)

#When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be

#commented out. Both the private key and certificate will be read from

#the PKCS#12 file in this case. Full path should be used since working

#directory may change when wpa_supplicant is run in the background.

#Windows certificate store can be used by leaving client_cert out and

#configuring private_key in one of the following formats:

#cert://substring_to_match

#hash://certificate_thumbprint_in_hex

#for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"

#Note that when running wpa_supplicant as an application, the user

#certificate store (My user account) is used, whereas computer store

#(Computer account) is used when running wpasvc as a service.

#Alternatively, a named configuration blob can be used by setting this

#to blob://<blob name>.

# private_key_passwd: Password for private key file (if left out, this will be

#asked through control interface)

# dh_file: File path to DH/DSA parameters file (in PEM format)

#This is an optional configuration file for setting parameters for an

#ephemeral DH key exchange. In most cases, the default RSA

#authentication does not use this configuration. However, it is possible

#setup RSA to use ephemeral DH key exchange. In addition, ciphers with

#DSA keys always use ephemeral DH keys. This can be used to achieve

#forward secrecy. If the file is in DSA parameters format, it will be

#automatically converted into DH params.

# subject_match: Substring to be matched against the subject of the

#authentication server certificate. If this string is set, the server

#sertificate is only accepted if it contains this string in the subject.

#The subject string is in following format:

#/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com

#Note: Since this is a substring match, this cannot be used securily to

#do a suffix match against a possible domain name in the CN entry. For

#such a use case, domain_suffix_match or domain_match should be used

#instead.

# altsubject_match: Semicolon separated string of entries to be matched against

#the alternative subject name of the authentication server certificate.

#If this string is set, the server sertificate is only accepted if it

#contains one of the entries in an alternative subject name extension.

#altSubjectName string is in following format: TYPE:VALUE

#Example: EMAIL:server@example.com

#Example: DNS:server.example.com;DNS:server2.example.com

#Following types are supported: EMAIL, DNS, URI

# domain_suffix_match: Constraint for server domain name. If set, this FQDN is

#used as a suffix match requirement for the AAAserver certificate in

#SubjectAltName dNSName element(s). If a matching dNSName is found, this

#constraint is met. If no dNSName values are present, this constraint is

#matched against SubjectName CN using same suffix match comparison.

#

#Suffix match here means that the host/domain name is compared one label

#at a time starting from the top-level domain and all the labels in

#domain_suffix_match shall be included in the certificate. The

#certificate may include additional sub-level labels in addition to the

#required labels.

#

#For example, domain_suffix_match=example.com would match

#test.example.com but would not match test-example.com.

# domain_match: Constraint for server domain name

#If set, this FQDN is used as a full match requirement for the

#server certificate in SubjectAltName dNSName element(s). If a

#matching dNSName is found, this constraint is met. If no dNSName

#values are present, this constraint is matched against SubjectName CN

#using same full match comparison. This behavior is similar to

#domain_suffix_match, but has the requirement of a full match, i.e.,

#no subdomains or wildcard matches are allowed. Case-insensitive

#comparison is used, so "Example.com" matches "example.com", but would

#not match "test.Example.com".

# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters

#(string with field-value pairs, e.g., "peapver=0" or

#"peapver=1 peaplabel=1")

#'peapver' can be used to force which PEAP version (0 or 1) is used.

#'peaplabel=1' can be used to force new label, "client PEAP encryption",

#to be used during key derivation when PEAPv1 or newer. Most existing

#PEAPv1 implementation seem to be using the old label, "client EAP

#encryption", and wpa_supplicant is now using that as the default value.

#Some servers, e.g., Radiator, may require peaplabel=1 configuration to

#interoperate with PEAPv1; see eap_testing.txt for more details.

#'peap_outer_success=0' can be used to terminate PEAP authentication on

#tunneled EAP-Success. This is required with some RADIUS servers that

#implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,

#Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)

#include_tls_length=1 can be used to force wpa_supplicant to include

#TLS Message Length field in all TLS messages even if they are not

#fragmented.

#sim_min_num_chal=3 can be used to configure EAP-SIM to require three

#challenges (by default, it accepts 2 or 3)

#result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use

#protected result indication.

#'crypto_binding' option can be used to control PEAPv0 cryptobinding

#behavior:

# * 0 = do not use cryptobinding (default)

# * 1 = use cryptobinding if server supports it

# * 2 = require cryptobinding

#EAP-WSC (WPS) uses following options: pin=<Device Password> or

#pbc=1.

#

#For wired IEEE 802.1X authentication, "allow_canned_success=1" can be

#used to configure a mode that allows EAP-Success (and EAP-Failure)

#without going through authentication step. Some switches use such

#sequence when forcing the port to be authorized/unauthorized or as a

#fallback option if the authentication server is unreachable. By default,

#wpa_supplicant discards such frames to protect against potential attacks

#by rogue devices, but this option can be used to disable that protection

#for cases where the server/authenticator does not need to be

#authenticated.

# phase2: Phase2 (inner authentication with TLS tunnel) parameters

#(string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or

#"autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS). "mschapv2_retry=0" can be

#used to disable MSCHAPv2 password retry in authentication failure cases.

#

# TLS-based methods can use the following parameters to control TLS behavior

# (these are normally in the phase1 parameter, but can be used also in the

# phase2 parameter when EAP-TLS is used within the inner tunnel):

# tls_allow_md5=1 - allow MD5-based certificate signatures (depending on the

#TLS library, these may be disabled by default to enforce stronger

#security)

# tls_disable_time_checks=1 - ignore certificate validity time (this requests

#the TLS library to accept certificates even if they are not currently

#valid, i.e., have expired or have not yet become valid; this should be

#used only for testing purposes)

# tls_disable_session_ticket=1 - disable TLS Session Ticket extension

# tls_disable_session_ticket=0 - allow TLS Session Ticket extension to be used

#Note: If not set, this is automatically set to 1 for EAP-TLS/PEAP/TTLS

#as a workaround for broken authentication server implementations unless

#EAP workarounds are disabled with eap_workaround=0.

#For EAP-FAST, this must be set to 0 (or left unconfigured for the

#default value to be used automatically).

# tls_disable_tlsv1_0=1 - disable use of TLSv1.0

# tls_disable_tlsv1_1=1 - disable use of TLSv1.1 (a workaround for AAA servers

#that have issues interoperating with updated TLS version)

# tls_disable_tlsv1_2=1 - disable use of TLSv1.2 (a workaround for AAA servers

#that have issues interoperating with updated TLS version)

#

# Following certificate/private key fields are used in inner Phase2

# authentication when using EAP-TTLS or EAP-PEAP.

# ca_cert2: File path to CA certificate file. This file can have one or more

#trusted CA certificates. If ca_cert2 and ca_path2 are not included,

#server certificate will not be verified. This is insecure and a trusted

#CA certificate should always be configured.

# ca_path2: Directory path for CA certificate files (PEM)

# client_cert2: File path to client certificate file

# private_key2: File path to client private key file

# private_key2_passwd: Password for private key file

# dh_file2: File path to DH/DSA parameters file (in PEM format)

# subject_match2: Substring to be matched against the subject of the

#authentication server certificate. See subject_match for more details.

# altsubject_match2: Semicolon separated string of entries to be matched

#against the alternative subject name of the authentication server

#certificate. See altsubject_match documentation for more details.

# domain_suffix_match2: Constraint for server domain name. See

#domain_suffix_match for more details.

#

# fragment_size: Maximum EAP fragment size in bytes (default 1398).

#This value limits the fragment size for EAP methods that support

#fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set

#small enough to make the EAP messages fit in MTU of the network

#interface used for EAPOL. The default value is suitable for most

#cases.

#

# ocsp: Whether to use/require OCSP to check server certificate

#0 = do not use OCSP stapling (TLS certificate status extension)

#1 = try to use OCSP stapling, but not require response

#2 = require valid OCSP stapling response

#

# openssl_ciphers: OpenSSL specific cipher configuration

#This can be used to override the global openssl_ciphers configuration

#parameter (see above).

#

# erp: Whether EAP Re-authentication Protocol (ERP) is enabled

#

# EAP-FAST variables:

# pac_file: File path for the PAC entries. wpa_supplicant will need to be able

#to create this file and write updates to it when PAC is being

#provisioned or refreshed. Full path to the file should be used since

#working directory may change when wpa_supplicant is run in the

#background. Alternatively, a named configuration blob can be used by

#setting this to blob://<blob name>

# phase1: fast_provisioning option can be used to enable in-line provisioning

#         of EAP-FAST credentials (PAC):

#         0 = disabled,

#         1 = allow unauthenticated provisioning,

#         2 = allow authenticated provisioning,

#         3 = allow both unauthenticated and authenticated provisioning

#fast_max_pac_list_len=<num> option can be used to set the maximum

#number of PAC entries to store in a PAC list (default: 10)

#fast_pac_format=binary option can be used to select binary format for

#storing PAC entries in order to save some space (the default

#text format uses about 2.5 times the size of minimal binary

#format)

#

# wpa_supplicant supports number of "EAP workarounds" to work around

# interoperability issues with incorrectly behaving authentication servers.

# These are enabled by default because some of the issues are present in large

# number of authentication servers. Strict EAP conformance mode can be

# configured by disabling workarounds with eap_workaround=0.



# Station inactivity limit

#

# If a station does not send anything in ap_max_inactivity seconds, an

# empty data frame is sent to it in order to verify whether it is

# still in range. If this frame is not ACKed, the station will be

# disassociated and then deauthenticated. This feature is used to

# clear station table of old entries when the STAs move out of the

# range.

#

# The station can associate again with the AP if it is still in range;

# this inactivity poll is just used as a nicer way of verifying

# inactivity; i.e., client will not report broken connection because

# disassociation frame is not sent immediately without first polling

# the STA with a data frame.

# default: 300 (i.e., 5 minutes)

#ap_max_inactivity=300



# DTIM period in Beacon intervals for AP mode (default: 2)

#dtim_period=2



# Beacon interval (default: 100 TU)

#beacon_int=100



# MAC address policy

# 0 = use permanent MAC address

# 1 = use random MAC address for each ESS connection

# 2 = like 1, but maintain OUI (with local admin bit set)

#mac_addr=0



# disable_ht: Whether HT (802.11n) should be disabled.

# 0 = HT enabled (if AP supports it)

# 1 = HT disabled

#

# disable_ht40: Whether HT-40 (802.11n) should be disabled.

# 0 = HT-40 enabled (if AP supports it)

# 1 = HT-40 disabled

#

# disable_sgi: Whether SGI (short guard interval) should be disabled.

# 0 = SGI enabled (if AP supports it)

# 1 = SGI disabled

#

# disable_ldpc: Whether LDPC should be disabled.

# 0 = LDPC enabled (if AP supports it)

# 1 = LDPC disabled

#

# ht40_intolerant: Whether 40 MHz intolerant should be indicated.

# 0 = 40 MHz tolerant (default)

# 1 = 40 MHz intolerant

#

# ht_mcs:  Configure allowed MCS rates.

#  Parsed as an array of bytes, in base-16 (ascii-hex)

# ht_mcs=""                                   // Use all available (default)

# ht_mcs="0xff 00 00 00 00 00 00 00 00 00 "   // Use MCS 0-7 only

# ht_mcs="0xff ff 00 00 00 00 00 00 00 00 "   // Use MCS 0-15 only

#

# disable_max_amsdu:  Whether MAX_AMSDU should be disabled.

# -1 = Do not make any changes.

# 0  = Enable MAX-AMSDU if hardware supports it.

# 1  = Disable AMSDU

#

# ampdu_factor: Maximum A-MPDU Length Exponent

# Value: 0-3, see 7.3.2.56.3 in IEEE Std 802.11n-2009.

#

# ampdu_density:  Allow overriding AMPDU density configuration.

#  Treated as hint by the kernel.

# -1 = Do not make any changes.

# 0-3 = Set AMPDU density (aka factor) to specified value.



sae_pwe=2root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# [  662.681602] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1197

root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# 
root@s40-bigbend-v1:/lcc/data/sigma1000dut_beagle_tgn_and_wmmps/test_engine# cd /lcc/data/logs/debug/
root@s40-bigbend-v1:/lcc/data/logs/debug# ls -al
total 24
drwxr-xr-x  2 root root  4096 Feb  6 06:00 .
drwxr-xr-x 25 root root  4096 Jan 27 01:24 ..
-rw-r--r--  1 root root    85 Feb  6 06:00 DEBG0001.tmp
-rw-r-----  1 root adm  10263 Feb  6 06:05 syslog.txt
root@s40-bigbend-v1:/lcc/data/logs/debug# [  692.681600] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198
[  694.780985] dwc2 49000000.usb-otg: Not connected
[  694.908779] dwc2 49000000.usb-otg: Not connected
[  695.018976] usb 1-1: USB disconnect, device number 2
[  695.022914] asix 1-1:1.0 eth0: unregister 'asix' usb-49000000.usb-otg-1, ASIX AX88772 USB 2.0 Ethernet
[  696.948775] usb 1-1: new high-speed USB device number 3 using dwc2
[  697.280799] SCSI subsystem initialized
[  697.298912] usb-storage 1-1:1.0: USB Mass Storage device detected
[  697.304532] scsi host0: usb-storage 1-1:1.0
[  697.308619] usbcore: registered new interface driver usb-storage
[  698.329553] scsi 0:0:0:0: Direct-Access     General  UDisk            5.00 PQ: 0 ANSI: 2
[  698.355290] sd 0:0:0:0: [sda] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[  698.361710] sd 0:0:0:0: [sda] Write Protect is off
[  698.366336] sd 0:0:0:0: [sda] No Caching mode page found
[  698.372021] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  698.422196]  sda: sda1
[  698.425782] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  698.817036] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ls
DEBG0001.tmp  syslog.txt
root@s40-bigbend-v1:/lcc/data/logs/debug# cp * /media/usbmount/Lennox-S40_SAE_FC-issues-24July2025/
root@s40-bigbend-v1:/lcc/data/logs/debug# [  722.681603] ili9881c-dsi 5a000000.dsi.0:  TE pulse count observed is 1198

root@s40-bigbend-v1:/lcc/data/logs/debug# umount /media/usbmount/
root@s40-bigbend-v1:/lcc/data/logs/debug# 
root@s40-bigbend-v1:/lcc/data/logs/debug# umount /media/usbmount/
umount: /media/usbmount/: not mounted.
root@s40-bigbend-v1:/lcc/data/logs/debug# [  743.518945] usb 1-1: USB disconnect, device number 3
[  748.188779] usb 1-1: new high-speed USB device number 4 using dwc2
[  748.917484] asix 1-1:1.0 eth0: register 'asix' at usb-49000000.usb-otg-1, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ba:17:be
[