<6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.4.48 (a0271468@dta0212502ub) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Sep 11 19:37:01 CDT 2013 <4>[ 0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache <4>[ 0.000000] Machine: OMAP5 panda board <2>[ 0.000000] Truncating memory at 0x80000000 to fit in 32-bit physical address space <6>[ 0.000000] android_display: setting hdmi resolution to 1920*1080, bpp=4 <6>[ 0.000000] android_display: tiler1d 56623104 <6>[ 0.000000] android_display: setting fb0.vram to 33177600 <6>[ 0.000000] android_display: setting vram to 33177600 <3>[ 0.000000] Cannot detect omap type! <6>[ 0.000000] Reserving 33554432 bytes SDRAM for VRAM <6>[ 0.000000] cma: CMA: reserved 16 MiB at 92800000 <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <6>[ 0.000000] OMAP4: Map 0x9fe00000 to 0xfe600000 for dram barrier <7>[ 0.000000] On node 0 totalpages: 163840 <7>[ 0.000000] free_area_init_node: node 0, pgdat c09f0800, node_mem_map c102d000 <7>[ 0.000000] Normal zone: 1024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 79360 pages, LIFO batch:15 <7>[ 0.000000] HighMem zone: 1024 pages used for memmap <7>[ 0.000000] HighMem zone: 82432 pages, LIFO batch:15 <6>[ 0.000000] OMAP5432 ES2.0 <3>[ 0.000000] FIXME: omap5 opp layer init <6>[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1834000 s13056 r8192 d15616 u36864 <7>[ 0.000000] pcpu-alloc: s13056 r8192 d15616 u36864 alloc=9*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 161792 <5>[ 0.000000] Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 omap_wdt.timer_margin=30 vmalloc=496M omapfb.fb_opt=-1,-1,-1,1,1280,720 omap-cpufreq.safe_suspend_freq=600000000 console=tt9 <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.000000] Memory: 312MB 2MB 323MB 3MB = 640MB total <5>[ 0.000000] Memory: 618368k/618368k available, 430208k reserved, 333824K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0xc0008000 - 0xc08f5000 (9140 kB) <5>[ 0.000000] .init : 0xc08f5000 - 0xc094d300 ( 353 kB) <5>[ 0.000000] .data : 0xc094e000 - 0xc09f3550 ( 662 kB) <5>[ 0.000000] .bss : 0xc09f3574 - 0xc0b6cff0 (1511 kB) <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:626 <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Architected local timer running at 6.14MHz. <6>[ 0.000183] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632) <6>[ 0.031341] pid_max: default: 32768 minimum: 301 <6>[ 0.031463] Security Framework initialized <6>[ 0.031555] Mount-cache hash table entries: 512 <6>[ 0.032379] Initializing cgroup subsys debug <6>[ 0.032379] Initializing cgroup subsys cpuacct <6>[ 0.032409] Initializing cgroup subsys freezer <6>[ 0.032409] Initializing cgroup subsys net_cls <6>[ 0.032470] CPU: Testing write buffer coherency: ok <6>[ 0.032623] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.032836] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available <6>[ 0.032897] Setting up static identity map for 0x8068d070 - 0x8068d0c8 <6>[ 0.033142] generating sar_ram layout... <6>[ 0.033416] sar ram layout created <4>[ 0.111602] CPU1: Booted secondary processor <6>[ 0.142395] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <2>[ 0.142425] CPU1: Unknown IPI message 0x1 <6>[ 0.142486] Brought up 2 CPUs <6>[ 0.142486] SMP: Total of 2 processors activated (3188.82 BogoMIPS). <4>[ 0.152160] omap_hwmod: aess: _wait_target_disable failed <4>[ 0.154998] omap_hwmod: dss_dispc: cannot be enabled (3) <4>[ 0.157684] omap_hwmod: dss_dsi1_a: cannot be enabled (3) <4>[ 0.160400] omap_hwmod: dss_dsi1_c: cannot be enabled (3) <4>[ 0.163085] omap_hwmod: dss_hdmi: cannot be enabled (3) <4>[ 0.165771] omap_hwmod: dss_rfbi: cannot be enabled (3) <4>[ 0.170166] omap_hwmod: mcpdm: cannot be enabled (3) <6>[ 0.170806] omap_hwmod: usb_otg_ss: setting DMADISABLE <3>[ 0.172058] omap_device: cannot add global notifier for dev PM QoS <6>[ 0.172607] dummy: <6>[ 0.173248] NET: Registered protocol family 16 <6>[ 0.175201] DMA: preallocated 256 KiB pool for atomic coherent allocations <6>[ 0.177032] gpiochip_add: registered GPIOs 0 to 31 on device: gpio <6>[ 0.177124] OMAP GPIO hardware version 0.1 <6>[ 0.177276] gpiochip_add: registered GPIOs 32 to 63 on device: gpio <6>[ 0.177520] gpiochip_add: registered GPIOs 64 to 95 on device: gpio <6>[ 0.177734] gpiochip_add: registered GPIOs 96 to 127 on device: gpio <6>[ 0.177978] gpiochip_add: registered GPIOs 128 to 159 on device: gpio <6>[ 0.178222] gpiochip_add: registered GPIOs 160 to 191 on device: gpio <6>[ 0.178436] gpiochip_add: registered GPIOs 192 to 223 on device: gpio <6>[ 0.178680] gpiochip_add: registered GPIOs 224 to 255 on device: gpio <6>[ 0.179779] omap_mux_init: Add partition: #1: core, flags: 4 <6>[ 0.180541] omap_mux_init: Add partition: #2: wkup, flags: 4 <3>[ 0.181884] Failed to get l3_init_clkdm <6>[ 0.187774] dmm dmm: initialized all PAT entries <6>[ 0.188659] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.188690] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.192871] OMAP DMA hardware revision 0.0 <6>[ 0.194305] SmartReflex Recalibration delay = 86400000ms <6>[ 0.194305] SmartReflex Class 1.5 initialized <6>[ 0.194549] Reprogramming LPDDR2 timings to 532000000 Hz <6>[ 0.200958] bio: create slab at 0 <6>[ 0.201446] vmmc_supply: 3000 mV <6>[ 0.201629] vwl1271: 1800 mV <5>[ 0.202423] SCSI subsystem initialized <6>[ 0.202636] usbcore: registered new interface driver usbfs <6>[ 0.202697] usbcore: registered new interface driver hub <6>[ 0.202819] usbcore: registered new device driver usb <6>[ 0.211364] i2c-gpio i2c-gpio: using pins 195 (SDA) and 194 (SCL) <6>[ 0.211547] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz <3>[ 0.246704] setting trigger mode 8 for irq 39 failed (gic_set_type+0x0/0xe8) <6>[ 0.246887] palmas 1-0048: twl6035 unknown detected <6>[ 0.247222] palmas 1-0048: Muxing GPIO 2, PWM 0, LED 0 <6>[ 0.248352] SMPS45: 600 <--> 1310 mV at 880 mV normal standby <6>[ 0.249053] SMPS6: 1200 mV normal standby <6>[ 0.249786] SMPS7: 1800 mV normal standby <6>[ 0.250640] SMPS8: 600 <--> 1310 mV at 1040 mV normal standby <6>[ 0.251464] SMPS9: 2100 mV normal standby <6>[ 0.252044] SMPS10: 5000 mV normal standby <6>[ 0.252319] LDO1: 2800 mV normal standby <6>[ 0.252990] LDO2: 2900 mV normal standby <6>[ 0.253540] LDO3: 3000 mV normal standby <6>[ 0.254211] LDO4: 1500 mV normal standby <6>[ 0.254760] LDO5: 1800 mV normal standby <6>[ 0.255310] LDO6: 1500 mV normal standby <6>[ 0.255889] LDO7: 1500 mV normal standby <6>[ 0.256408] LDO8: 1500 mV normal standby <6>[ 0.257110] LDO9: 1800 <--> 3300 mV at 900 mV normal standby <6>[ 0.257934] LDOLN: 1800 mV normal standby <6>[ 0.258514] LDOUSB: 3250 mV normal standby <6>[ 0.259948] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz <6>[ 0.260131] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 400 kHz <6>[ 0.260345] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz <6>[ 0.260528] omap_i2c omap_i2c.5: bus 5 rev2.4.0 at 400 kHz <6>[ 0.262268] gpiochip_add: registered GPIOs 256 to 279 on device: tca6424 <6>[ 0.262390] Linux video capture interface: v2.00 <4>[ 0.262451] sr_init: No PMIC hook to init smartreflex <6>[ 0.262878] omap-iommu omap-iommu.0: dsp registered <6>[ 0.262939] omap-iommu omap-iommu.1: ipu registered <6>[ 0.263092] Advanced Linux Sound Architecture Driver Version 1.0.25. <6>[ 0.263549] Bluetooth: Core ver 2.16 <6>[ 0.263610] NET: Registered protocol family 31 <6>[ 0.263610] Bluetooth: HCI device and connection manager initialized <6>[ 0.263641] Bluetooth: HCI socket layer initialized <6>[ 0.263641] Bluetooth: HCI socket layer initialized <6>[ 0.263641] Bluetooth: L2CAP socket layer initialized <6>[ 0.263671] Bluetooth: SCO socket layer initialized <6>[ 0.272247] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized <6>[ 0.272521] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized <6>[ 0.272796] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized <6>[ 0.272796] Power Management for TI OMAP4XX/OMAP5XXX devices. <4>[ 0.272918] ------------[ cut here ]------------ <4>[ 0.272918] WARNING: at arch/arm/mach-omap2/pm4xxx_5xxx.c:751 omap4_pm_init+0x848/0xc38() <4>[ 0.272918] Enabled DSS->EMIF Static dependency, needs proper rootcause <4>[ 0.272949] Modules linked in: <4>[ 0.272949] Backtrace: <4>[ 0.272979] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c) <4>[ 0.272979] r6:000002ef r5:c0904904 r4:d242dec8 r3:c09b0f50 <4>[ 0.273010] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) <4>[ 0.273040] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40) <4>[ 0.273040] r8:00000000 r7:c09ae284 r6:c09ae254 r5:c09ae2e4 r4:00000000 <4>[ 0.273071] r3:00000009 <4>[ 0.273071] [] (warn_slowpath_fmt+0x0/0x40) from [] (omap4_pm_init+0x848/0xc38) <4>[ 0.273101] r3:c09f4924 r2:c0828684 <4>[ 0.273101] [] (omap4_pm_init+0x0/0xc38) from [] (omap2_common_pm_subsys_init+0x188/0x21c) <4>[ 0.273132] [] (omap2_common_pm_subsys_init+0x0/0x21c) from [] (do_one_initcall+0x11c/0x184) <4>[ 0.273132] r5:00000004 r4:d242c000 <4>[ 0.273162] [] (do_one_initcall+0x0/0x184) from [] (kernel_init+0x104/0x1c4) <4>[ 0.273162] [] (kernel_init+0x0/0x1c4) from [] (do_exit+0x0/0x804) <4>[ 0.273193] Board Information: <4>[ 0.273193] Revision : 0000 <4>[ 0.273223] Serial : 0000000000000000 <4>[ 0.273223] SoC Information: <4>[ 0.273223] CPU : OMAP5432 <4>[ 0.273223] Rev : ES2.0 <4>[ 0.273223] Type : GP <4>[ 0.273223] Production ID: D0110451-2E6604F0 <4>[ 0.273223] Die ID : 2AC20021-00000503-015D475F-0800C009 <4>[ 0.273223] <4>[ 0.273254] ---[ end trace 9b5db8f6ff24d43d ]--- <4>[ 0.273468] ------------[ cut here ]------------ <4>[ 0.273498] WARNING: at arch/arm/mach-omap2/pm4xxx_5xxx.c:1238 omap4_pm_init+0xb28/0xc38() <4>[ 0.273498] omap4_pm_init: EMIF Clock domain denied idle: DDR3 WA <4>[ 0.273529] Modules linked in: <4>[ 0.273529] Backtrace: <4>[ 0.273559] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c) <4>[ 0.273559] r6:000004d6 r5:c0904be4 r4:d242dec8 r3:c09b0f50 <4>[ 0.273590] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x54/0x6c) <4>[ 0.273590] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40) <4>[ 0.273620] r8:00000000 r7:c09ae284 r6:c09ae254 r5:00000003 r4:00000000 <4>[ 0.273651] r3:00000009 <4>[ 0.273651] [] (warn_slowpath_fmt+0x0/0x40) from [] (omap4_pm_init+0xb28/0xc38) <4>[ 0.273681] r3:c068fa58 r2:c08288cc <4>[ 0.273681] [] (omap4_pm_init+0x0/0xc38) from [] (omap2_common_pm_subsys_init+0x188/0x21c) <4>[ 0.273712] [] (omap2_common_pm_subsys_init+0x0/0x21c) from [] (do_one_initcall+0x11c/0x184) <4>[ 0.273712] r5:00000004 r4:d242c000 <4>[ 0.273742] [] (do_one_initcall+0x0/0x184) from [] (kernel_init+0x104/0x1c4) <4>[ 0.273773] [] (kernel_init+0x0/0x1c4) from [] (do_exit+0x0/0x804) <4>[ 0.273773] Board Information: <4>[ 0.273773] Revision : 0000 <4>[ 0.273773] Serial : 0000000000000000 <4>[ 0.273773] SoC Information: <4>[ 0.273803] CPU : OMAP5432 <4>[ 0.273803] Rev : ES2.0 <4>[ 0.273803] Type : GP <4>[ 0.273803] Production ID: D0110451-2E6604F0 <4>[ 0.273803] Die ID : 2AC20021-00000503-015D475F-0800C009 <4>[ 0.273803] <4>[ 0.273834] ---[ end trace 9b5db8f6ff24d43e ]--- <6>[ 0.273864] omap_opp_set_min_rate: Missing opp info for hwmod hsi <6>[ 0.273864] Forcing clock hsi_fclk to minimum rate 192000000 <6>[ 0.273895] omap_opp_set_min_rate: Missing opp info for hwmod ipu_c0 <6>[ 0.273895] Forcing clock dpll_core_h22x2_ck to minimum rate 425600000 <6>[ 0.273925] omap_opp_set_min_rate: Missing opp info for hwmod dsp_c0 <6>[ 0.273925] Forcing clock virt_dpll_dsp_ck to minimum rate 233000000 <6>[ 0.274444] Switching to clocksource arch_sys_counter <6>[ 0.288635] NET: Registered protocol family 2 <6>[ 0.288818] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 0.289215] TCP established hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.290252] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) <6>[ 0.291320] TCP: Hash tables configured (established 65536 bind 65536) <6>[ 0.291320] TCP: reno registered <6>[ 0.291351] UDP hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.291381] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) <6>[ 0.291564] NET: Registered protocol family 1 <6>[ 0.291809] RPC: Registered named UNIX socket transport module. <6>[ 0.291839] RPC: Registered udp transport module. <6>[ 0.291839] RPC: Registered tcp transport module. <6>[ 0.291839] RPC: Registered tcp NFSv4.1 backchannel transport module. <4>[ 0.291900] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2 <6>[ 0.292724] Trying to unpack rootfs image as initramfs... <6>[ 0.301727] Freeing initrd memory: 176K <4>[ 0.302032] NetWinder Floating Point Emulator V0.97 (double precision) <6>[ 0.305786] sr_classp5_calib_work: smartreflex_core: Calibration complete: Voltage Nominal=1040000 Calib=1040000 Dyn=1040000 OPP_margin=0 total_margin=0 <6>[ 0.305847] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=1060000 Calib=1060000 Dyn=1060000 OPP_margin=0 total_margin=0 <6>[ 0.305877] sr_classp5_calib_work: smartreflex_mm: Calibration complete: Voltage Nominal=1120000 Calib=1120000 Dyn=1120000 OPP_margin=0 total_margin=0 <4>[ 0.420379] highmem bounce pool size: 64 pages <6>[ 0.421142] fuse init (API version 7.18) <6>[ 0.421264] msgmni has been set to 588 <6>[ 0.422698] io scheduler noop registered <6>[ 0.422698] io scheduler deadline registered <6>[ 0.422760] io scheduler cfq registered (default) <6>[ 0.423522] OMAP DSS rev 6.1 <6>[ 0.450286] dsscomp: initializing. <7>[ 0.450286] misc dsscomp: display0=hdmi_panel <6>[ 0.450317] misc dsscomp: found 1 displays and 4 overlays, WB overlay 1 <6>[ 0.450927] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0 <6>[ 0.451232] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2 <6>[ 1.851562] console [ttyO2] enabled <6>[ 1.860778] omap_uart.4: ttyO4 at MMIO 0x48066000 (irq = 137) is a OMAP UART4 <6>[ 1.868988] [drm] Initialized drm 1.1.0 20060810 <6>[ 1.874023] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000 <6>[ 1.882324] omap_ion_probe: adding heap tiler of type 4 with b5200000@5100000 <6>[ 1.889953] omap_ion_probe: adding heap nonsecure_tiler of type 4 with b4300000@f00000 <6>[ 1.898406] omap_ion_probe: adding heap system of type 0 with 0@0 <6>[ 1.904937] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0 <6>[ 1.916778] brd: module loaded <6>[ 1.922271] loop: module loaded <6>[ 1.925689] (stk) :sysfs entries created <6>[ 1.929901] (stk) : debugfs entries created <6>[ 1.934356] (hci_tty): inside hci_tty_init <6>[ 1.938995] (hci_tty): allocated 252, 0 <6>[ 1.943084] AK8975 compass driver: init <3>[ 1.947753] gccore gccore.0: opp_get_opp_count: device OPP not found (-19) <6>[ 1.974151] NFC Driver for TI WiLink <3>[ 1.978332] mtdoops: mtd device (mtddev=name/number) must be supplied <6>[ 1.993347] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated <6>[ 2.001159] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated <6>[ 2.009155] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated <6>[ 2.016937] tun: Universal TUN/TAP device driver, 1.6 <6>[ 2.022338] tun: (C) 1999-2004 Max Krasnyansky <6>[ 2.029357] usbcore: registered new interface driver asix <6>[ 2.035156] usbcore: registered new interface driver cdc_ether <6>[ 2.041442] usbcore: registered new interface driver smsc95xx <6>[ 2.047576] usbcore: registered new interface driver net1080 <6>[ 2.053649] usbcore: registered new interface driver cdc_subset <6>[ 2.059997] usbcore: registered new interface driver zaurus <6>[ 2.065979] usbcore: registered new interface driver cdc_ncm <3>[ 2.118865] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 2.118865] <3>[ 2.151611] Failed to set PHY power mode to 2 <3>[ 2.173065] omapdss HDMI error: failed to power on device <3>[ 2.178802] omapdss error: failed to power on <6>[ 2.196502] input: cec_keyboard as /devices/virtual/input/input0 <6>[ 2.813568] PC detected <6>[ 2.822174] palmas-usb palmas-usb.8: Initialized Palmas USB module <6>[ 2.828948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <7>[ 2.835937] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 <7>[ 2.836181] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3 <7>[ 2.836212] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM <7>[ 2.836242] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <6>[ 2.836242] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller <7>[ 2.842254] drivers/usb/core/inode.c: creating file 'devices' <7>[ 2.842285] drivers/usb/core/inode.c: creating file '001' <6>[ 2.842407] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 <7>[ 2.850860] ehci-omap ehci-omap.0: park 0 <7>[ 2.850860] ehci-omap ehci-omap.0: support lpm <6>[ 2.850891] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 <7>[ 2.856964] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN <6>[ 2.868255] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 <7>[ 2.874359] usb usb1: default language 0x0409 <7>[ 2.874389] usb usb1: udev 1, busnum 1, minor = 0 <6>[ 2.874420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 2.881561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 2.889160] usb usb1: Product: OMAP-EHCI Host Controller <6>[ 2.894744] usb usb1: Manufacturer: Linux 3.4.48 ehci_hcd <6>[ 2.900421] usb usb1: SerialNumber: ehci-omap.0 <7>[ 2.905364] usb usb1: usb_probe_device <7>[ 2.905364] usb usb1: configuration #1 chosen from 1 choice <7>[ 2.905395] usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>[ 2.905487] hub 1-0:1.0: usb_probe_interface <7>[ 2.905487] hub 1-0:1.0: usb_probe_interface - got id <6>[ 2.905517] hub 1-0:1.0: USB hub found <6>[ 2.909484] hub 1-0:1.0: 3 ports detected <7>[ 2.913696] hub 1-0:1.0: standalone hub <7>[ 2.913696] hub 1-0:1.0: individual port power switching <7>[ 2.913696] hub 1-0:1.0: individual port over-current protection <7>[ 2.913726] hub 1-0:1.0: power on to power good time: 20ms <7>[ 2.913726] hub 1-0:1.0: local power source is good <7>[ 2.913757] hub 1-0:1.0: enabling power on all ports <7>[ 2.913909] drivers/usb/core/inode.c: creating file '001' <7>[ 2.914001] ehci-omap ehci-omap.0: ...powerup ports... <6>[ 2.938720] usbcore: registered new interface driver cdc_wdm <6>[ 2.944671] Initializing USB Mass Storage driver... <6>[ 2.949859] usbcore: registered new interface driver usb-storage <6>[ 2.956176] USB Mass Storage support registered. <6>[ 2.961090] usbcore: registered new interface driver libusual <6>[ 2.967193] usbcore: registered new interface driver usbtest <6>[ 2.973144] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) <6>[ 2.979675] file system registered <6>[ 2.984069] gadget: Mass Storage Function, version: 2009/09/11 <6>[ 2.990325] gadget: Number of LUNs=1 <6>[ 2.994171] lun0: LUN: removable file: (no medium) <6>[ 2.999481] gadget: android_usb ready <7>[ 3.008911] ehci-omap ehci-omap.0: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 3.008941] hub 1-0:1.0: port 3: status 0501 change 0001 <7>[ 3.110443] hub 1-0:1.0: state 7 ports 3 chg 0008 evt 0000 <7>[ 3.110473] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s <7>[ 3.172943] ehci-omap ehci-omap.0: port 3 high speed <7>[ 3.172943] ehci-omap ehci-omap.0: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 3.235443] usb 1-3: new high-speed USB device number 2 using ehci-omap <7>[ 3.313690] ehci-omap ehci-omap.0: port 3 high speed <7>[ 3.313690] ehci-omap ehci-omap.0: GetStatus port:3 status 001805 0 ACK POWER sig=j PE CONNECT <7>[ 3.407684] usb 1-3: udev 2, busnum 1, minor = 1 <6>[ 3.407714] usb 1-3: New USB device found, idVendor=0424, idProduct=9730 <6>[ 3.414733] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 3.438690] usb 1-3: usb_probe_device <7>[ 3.438690] usb 1-3: configuration #1 chosen from 1 choice <6>[ 3.439453] mousedev: PS/2 mouse device common for all mice <7>[ 3.445343] usb 1-3: adding 1-3:1.0 (config #1, interface 0) <7>[ 3.445434] smsc95xx 1-3:1.0: usb_probe_interface <7>[ 3.445465] smsc95xx 1-3:1.0: usb_probe_interface - got id <6>[ 3.445495] smsc95xx v1.0.4 <6>[ 3.453582] input: palmas_pwron as /devices/platform/omap_i2c.1/i2c-1/1-0048/palmas-pwrbutton.7/input/input1 <6>[ 3.467407] twl_rtc twl_rtc.9: rtc core: registered twl_rtc as rtc0 <6>[ 3.475524] i2c /dev entries driver <6>[ 3.479766] usbcore: registered new interface driver uvcvideo <6>[ 3.485809] USB Video Class driver (1.1.1) <6>[ 3.490203] Driver for 1-wire Dallas network protocol. <6>[ 3.496887] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 30 sec <3>[ 3.504211] report_temperature_delayed_work_fn: Fail to set temp <6>[ 3.511016] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com <6>[ 3.520477] cpuidle: using governor ladder <6>[ 3.525207] cpuidle: using governor menu <7>[ 3.544891] Registered led device: blue <7>[ 3.545837] Registered led device: red <7>[ 3.546813] Registered led device: green <7>[ 3.547790] Registered led device: panda5::status1 <7>[ 3.549133] Registered led device: panda5::status2 <7>[ 3.550323] Registered led device: panda5::status3 <7>[ 3.551513] Registered led device: panda5::status4 <6>[ 3.552307] smsc95xx 1-3:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-3, smsc95xx USB 2.0 Ethernet, 8e:be:f5:93:84:06 <7>[ 3.564270] drivers/usb/core/inode.c: creating file '002' <7>[ 3.564453] Registered led device: panda5::status5 <6>[ 3.565002] usbcore: registered new interface driver usbhid <6>[ 3.570861] usbhid: USB HID core driver <7>[ 3.575012] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004 <7>[ 3.575042] ehci-omap ehci-omap.0: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT <7>[ 3.575073] hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s <6>[ 3.579071] ashmem: initialized <6>[ 3.582611] logger: created 256K log 'log_main' <6>[ 3.588806] logger: created 256K log 'log_events' <6>[ 3.593872] logger: created 256K log 'log_radio' <6>[ 3.598876] logger: created 256K log 'log_system' <6>[ 3.604248] omap_governor_init: domain cpu slope 118 const -2992 <6>[ 3.610717] omap_governor_init: domain gpu slope 61 const -1558 <6>[ 3.618255] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=1250000 Calib=1250000 Dyn=1250000 OPP_margin=0 total_margin=0 <6>[ 3.634307] rproc remoteproc0: ipu_c0 is available <6>[ 3.639373] rproc remoteproc0: Note: remoteproc is still under development and considered experimental. <6>[ 3.649322] rproc remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. <6>[ 3.661346] OMAP HSI: HSI driver version 0.4.4 <6>[ 3.666381] usbcore: registered new interface driver snd-usb-audio <6>[ 3.674804] aess aess: ABE Firmware version 9560 <6>[ 3.703796] mmc0: new high speed DDR MMC card at address 0001 <6>[ 3.710449] mmcblk0: mmc0:0001 SEM04G 3.68 GiB <6>[ 3.715393] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB <6>[ 3.721801] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB <4>[ 3.731323] Alternate GPT is invalid, using primary GPT. <7>[ 3.736999] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 <6>[ 3.737182] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 <6>[ 3.744934] mmcblk0boot1: unknown partition table <6>[ 3.750122] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok <6>[ 3.756652] mmcblk0boot0: unknown partition table <6>[ 3.762023] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok <6>[ 3.769165] asoc: snd-soc-dummy-dai <-> Voice mapping ok <6>[ 3.775238] asoc: snd-soc-dummy-dai <-> Tones mapping ok <6>[ 3.781677] asoc: snd-soc-dummy-dai <-> Vibra mapping ok <6>[ 3.787506] asoc: snd-soc-dummy-dai <-> MODEM mapping ok <6>[ 3.793273] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok <6>[ 3.800079] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok <7>[ 3.800140] ehci-omap ehci-omap.0: port 2 high speed <7>[ 3.800170] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 3.807220] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok <6>[ 3.813598] asoc: dit-hifi <-> mcasp-legacy mapping ok <6>[ 3.819458] asoc: dmic-hifi <-> omap-dmic mapping ok <6>[ 3.825378] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok <6>[ 3.833435] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok <6>[ 3.838897] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok <6>[ 3.844512] asoc: twl6040-vib <-> mcpdm-vib mapping ok <6>[ 3.850128] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok <6>[ 3.856567] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok <6>[ 3.863006] usb 1-2: new high-speed USB device number 3 using ehci-omap <6>[ 3.863006] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok <6>[ 3.876281] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok <6>[ 3.882720] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok <6>[ 3.889160] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok <6>[ 3.895507] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok <6>[ 3.901885] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok <6>[ 3.908233] asoc: snd-soc-dummy-dai <-> omap-abe-vxrec-dai mapping ok <6>[ 3.915222] asoc: snd-soc-dummy-dai <-> omap-abe-echo-dai mapping ok <6>[ 3.922576] input: OMAP5EVM Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input2 <4>[ 3.932769] omap-abe-twl6040 omap-abe-twl6040: couldn't get AV Switch regulator <7>[ 3.940643] ehci-omap ehci-omap.0: port 2 high speed <7>[ 3.940643] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <6>[ 3.941131] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok <6>[ 3.948272] oprofile: using timer interrupt. <6>[ 3.952850] GACT probability NOT on <4>[ 3.956542] mmc1: host does not support reading read-only switch. assuming write-enable. <6>[ 3.965057] Mirror/redirect action on <6>[ 3.968902] u32 classifier <6>[ 3.971740] Actions configured <6>[ 3.975372] mmc1: new high speed SDHC card at address 0001 <6>[ 3.981292] Netfilter messages via NETLINK v0.30. <6>[ 3.986267] mmcblk1: mmc1:0001 00000 14.6 GiB <6>[ 3.991149] nf_conntrack version 0.5.0 (9920 buckets, 39680 max) <6>[ 3.997558] mmcblk1: p1 p2 <6>[ 4.001312] ctnetlink v0.93: registering with nfnetlink. <6>[ 4.006927] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 4.014282] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 4.020538] xt_time: kernel timezone is -0000 <6>[ 4.025329] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 4.031005] arp_tables: (C) 2002 David S. Miller <6>[ 4.035919] TCP: cubic registered <6>[ 4.039428] Initializing XFRM netlink socket <7>[ 4.044036] usb 1-2: udev 3, busnum 1, minor = 2 <6>[ 4.044036] usb 1-2: New USB device found, idVendor=0424, idProduct=3503 <6>[ 4.051086] NET: Registered protocol family 10 <6>[ 4.056243] Mobile IPv6 <6>[ 4.057067] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 4.057220] usb 1-2: usb_probe_device <7>[ 4.057220] usb 1-2: configuration #1 chosen from 1 choice <7>[ 4.057434] usb 1-2: adding 1-2:1.0 (config #1, interface 0) <7>[ 4.057495] hub 1-2:1.0: usb_probe_interface <7>[ 4.057495] hub 1-2:1.0: usb_probe_interface - got id <6>[ 4.057525] hub 1-2:1.0: USB hub found <6>[ 4.057678] hub 1-2:1.0: 3 ports detected <7>[ 4.057678] hub 1-2:1.0: standalone hub <7>[ 4.057678] hub 1-2:1.0: ganged power switching <7>[ 4.057678] hub 1-2:1.0: global over-current protection <7>[ 4.057830] hub 1-2:1.0: TT per port <7>[ 4.057861] hub 1-2:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 4.057861] hub 1-2:1.0: power on to power good time: 0ms <7>[ 4.058166] hub 1-2:1.0: local power source is good <7>[ 4.058166] hub 1-2:1.0: no over-current condition exists <7>[ 4.058197] hub 1-2:1.0: enabling power on all ports <7>[ 4.058593] drivers/usb/core/inode.c: creating file '003' <6>[ 4.074462] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 4.080200] IPv6 over IPv4 tunneling driver <6>[ 4.085144] NET: Registered protocol family 17 <6>[ 4.089843] NET: Registered protocol family 15 <5>[ 4.094573] Bridge firewalling registered <6>[ 4.098876] Bluetooth: RFCOMM TTY layer initialized <6>[ 4.104003] Bluetooth: RFCOMM socket layer initialized <6>[ 4.109405] Bluetooth: RFCOMM ver 1.11 <6>[ 4.113372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 4.109405] Bluetooth: RFCOMM ver 1.11 <6>[ 4.113372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 4.118957] Bluetooth: BNEP filters: protocol multicast <6>[ 4.124450] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>[ 4.130706] NET: Registered protocol family 35 <6>[ 4.135437] NET: Registered protocol family 37 <6>[ 4.140106] NET: Registered protocol family 40 <4>[ 4.144866] safe_suspend_freq_set: suspend will take place at frequency 1000000000 <6>[ 4.152954] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 <6>[ 4.161010] ThumbEE CPU extension supported. <5>[ 4.165527] Registering SWP/SWPB emulation handler <7>[ 4.165527] usb 1-2: link qh256-0001/d1d2e280 start 1 [1/0 us] <7>[ 4.165557] hub 1-2:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 4.174133] clock: disabling unused clocks to save power <3>[ 4.180206] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 4.180206] <6>[ 4.187561] Enter hdmi_core_init <6>[ 4.190979] Enable video_path <3>[ 4.524108] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 4.524139] <3>[ 4.542510] Failed to set PHY power mode to 2 <3>[ 4.547241] omapdss HDMI error: failed to power on device <3>[ 4.552917] omapdss error: failed to power on <3>[ 4.557586] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.569152] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.583770] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.597686] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.609405] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.623352] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.637237] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.648803] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.660400] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.671997] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.683593] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <3>[ 4.695190] omap_hsmmc omap_hsmmc.2: Timeout waiting on controller reset in omap_hsmmc_reset_controller_fsm <6>[ 4.866821] cannot apply mgr(tv) on inactive device <6>[ 4.872100] cannot aply mgr(lcd)--invalid device <4>[ 4.877014] omapfb omapfb: failed to apply dispc config <6>[ 4.882537] cannot apply mgr(tv) on inactive device <4>[ 4.892211] omapfb omapfb: failed to apply dispc config <6>[ 4.897705] cannot aply mgr(lcd2)--invalid device <4>[ 4.902648] omapfb omapfb: failed to apply dispc config <3>[ 4.908233] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 4.908264] <6>[ 4.915618] Enter hdmi_core_init <6>[ 4.919036] Enable video_path <4>[ 4.941101] LDOUSB: incomplete constraints, leaving on <4>[ 4.946746] LDOLN: incomplete constraints, leaving on <4>[ 4.952270] LDO8: incomplete constraints, leaving on <4>[ 4.957977] LDO6: incomplete constraints, leaving on <4>[ 4.963439] LDO5: incomplete constraints, leaving on <4>[ 4.968872] LDO3: incomplete constraints, leaving on <4>[ 4.974822] SMPS8: incomplete constraints, leaving on <4>[ 4.980346] SMPS6: incomplete constraints, leaving on <4>[ 4.986022] SMPS45: incomplete constraints, leaving on <6>[ 4.991790] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3 <6>[ 5.000061] twl_rtc twl_rtc.9: setting system clock to 2000-01-01 23:26:02 UTC (946769162) <6>[ 5.008758] ALSA device list: <6>[ 5.011901] #0: OMAP5EVM <6>[ 5.014739] #1: OMAPHDMI <6>[ 5.017883] Freeing init memory: 352K <4>[ 5.023834] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <6>[ 5.196624] sr_classp5_calib_work: smartreflex_mpu: Calibration complete: Voltage Nominal=880000 Calib=890000 Dyn=880000 OPP_margin=0 total_margin=0 <6>[ 5.212097] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 5.226745] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) <6>[ 5.242004] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <6>[ 5.298004] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap_hsmmc.1/by-name/cache <6>[ 5.483612] rproc remoteproc0: powering up ipu_c0 <6>[ 5.513427] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null) <6>[ 5.531402] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <6>[ 5.558685] rproc remoteproc0: Booting fw image ducati-m3-core0.xem3, size 13487335 <6>[ 5.587249] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap_hsmmc.1/by-name/userdata <6>[ 5.613189] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null) <3>[ 5.682067] init: cannot find '/system/bin/rild', disabling 'ril-daemon' <3>[ 5.693267] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' <3>[ 5.760650] HDCP: failed to load keys <3>[ 5.760650] <6>[ 5.768524] Compat-wireless backport release: ol_r8.a5.08 <6>[ 5.774627] Backport based on wl18xx.git ol_r8.a5.13 <6>[ 5.779998] compat.git: wl18xx.git <6>[ 5.814727] omap-iommu omap-iommu.1: ipu: version 2.1 <6>[ 5.826995] rproc remoteproc0: remote processor ipu_c0 is now up <6>[ 5.835205] virtio_rpmsg_bus virtio0: rpmsg host is online <6>[ 5.841033] rproc remoteproc0: registered virtio0 (type 7) <6>[ 5.919830] cfg80211: Calling CRDA to update world regulatory domain <6>[ 5.922485] PVR: PVRCore_Init <6>[ 5.930023] PVR: LinuxMMInit: Maximum page pool size: 10800 <6>[ 5.936523] PVR: PVRSRVDriverProbe(pDevice=d24ea200) <6>[ 5.942077] PVR: SGX register base: 0x56000000 <6>[ 5.947082] PVR: SGX register size: 65535 <6>[ 5.951660] PVR: SGX IRQ: 53 <6>[ 5.955139] PVR: EnableSystemClocks: Enabling System Clocks <6>[ 5.961486] PVR: PVRCore_Init: major device 246 <6>[ 5.987121] cfg80211: World regulatory domain updated: <6>[ 5.992706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) <6>[ 6.001983] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.010681] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 6.019805] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) <6>[ 6.028137] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <6>[ 6.036376] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) <7>[ 6.165130] hub 1-2:1.0: hub_suspend <7>[ 6.165161] usb 1-2: unlink qh256-0001/d1d2e280 start 1 [1/0 us] <7>[ 6.165405] usb 1-2: usb auto-suspend, wakeup 1 <6>[ 6.203979] PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [0, ] <6>[ 6.266754] PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [0, ] <6>[ 6.283599] PVR: Installing MISR with cookie bf08557c <6>[ 6.289123] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie d1f0dc80 <6>[ 6.296844] PVR: SysFinalise: Version string: SGX revision = 1.1.6 <4>[ 6.303710] omaplfb: OMAPLFBInitFBDev: Device 2: invalid framebuffer size <4>[ 6.310882] omaplfb: OMAPLFBInitFBDev: Device 1: invalid framebuffer size <7>[ 6.318084] omaplfb: OMAPLFBInitFBVRAM: Device 0: Using 4 VRAM framebuffers <6>[ 6.360961] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) <6>[ 6.395599] PVR_K:(Error): PVRSRVOpenDCDeviceKM: no devnode matching index 0 [0, ] <6>[ 6.400238] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) <6>[ 6.562469] wlcore: wl12xx driver version: jenkins-OMAP5_kernel_3.4-1061 <3>[ 6.589050] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 6.589050] <3>[ 6.607696] Failed to set PHY power mode to 2 <3>[ 6.612823] omapdss HDMI error: failed to power on device <6>[ 6.621154] wlcore: wl18xx driver version: jenkins-OMAP5_kernel_3.4-1061 <3>[ 6.628265] omapdss error: failed to power on <3>[ 6.688995] android_usb: already disabled <3>[ 6.693359] android_usb: already disabled <3>[ 6.699768] android_usb: already disabled <6>[ 6.705291] warning: `adbd' uses 32-bit capabilities (legacy support in use) <6>[ 6.713836] adb_open <6>[ 6.716400] mtp_bind_config <6>[ 6.720764] adb_bind_config <3>[ 6.748199] HDCP: hdcp_3des_cb: hdcp_keys not loaded = 0 <3>[ 6.748199] <6>[ 6.748443] Enter hdmi_core_init <6>[ 6.748474] Enable video_path <6>[ 6.806915] PVR_K:(Error): PVRSRVOpenDCDeviceKM: no devnode matching index 0 [0, ] <6>[ 7.256988] android_work: sent uevent USB_STATE=CONNECTED <6>[ 7.266967] android_work: sent uevent USB_STATE=DISCONNECTED <6>[ 7.348876] android_work: sent uevent USB_STATE=CONNECTED <6>[ 7.356201] android_usb gadget: high-speed config #1: android <6>[ 7.362823] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 7.854736] omap-rproc omap-rproc.1: received echo reply from ipu_c0 <6>[ 7.867004] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx1 addr 0x3c <6>[ 7.874938] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! <6>[ 7.882598] virtio_rpmsg_bus virtio0: creating channel omaprpc addr 0x3b <6>[ 8.491638] virtio_rpmsg_bus virtio0: creating channel rpmsg-resmgr addr 0x66 <3>[ 8.513397] rprm_regulator_request: regulator lookup failed, id 1 <3>[ 8.521209] rpmsg_resmgr rpmsg2: request for regulator failed: -22 <3>[ 8.528411] rpmsg_resmgr rpmsg2: resource allocation failed -22! <6>[ 9.531707] request_suspend_state: wakeup (3->0) at 9522876956 (2000-01-01 23:26:07.023725261 UTC) <6>[ 9.927886] acc_open <6>[ 9.930175] acc_release <7>[ 10.358520] usb 1-2: usb auto-resume <7>[ 10.391723] ehci-omap ehci-omap.0: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT <7>[ 10.415191] usb 1-2: finish resume <7>[ 10.415496] hub 1-2:1.0: hub_resume <7>[ 10.415893] ehci-omap ehci-omap.0: reused qh d1d2e280 schedule <7>[ 10.415893] usb 1-2: link qh256-0001/d1d2e280 start 1 [1/0 us] <7>[ 10.415954] hub 1-2:1.0: state 7 ports 3 chg 0000 evt 0000 <6>[ 10.454528] PVR_K:(Error): PVRSRVOpenDCDeviceKM: no devnode matching index 0 [0, ] <6>[ 11.141601] PVR_K:(Error): PVRSRVOpenDCDeviceKM: no devnode matching index 32 [0, ] <6>[ 11.208160] mtp_open <6>[ 11.465942] PVR_K:(Error): PVRSRVOpenDCDeviceKM: no devnode matching index 0 [0, ] <3>[ 12.868621] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit <3>[ 12.971862] init: Boot Animation exit <7>[ 13.016754] hub 1-2:1.0: hub_suspend <7>[ 13.016815] usb 1-2: unlink qh256-0001/d1d2e280 start 1 [1/0 us] <7>[ 13.016998] usb 1-2: usb auto-suspend, wakeup 1 <6>[ 23.522033] request_suspend_state: sleep (0->3) at 23513181808 (2000-01-01 23:26:21.014031903 UTC) <6>[ 23.531890] DSSCOMP: dsscomp_early_suspend <6>[ 23.549591] DSSCOMP: blanked screen